Characterization of mechanical properties and formability of a superplastic Al-Mg alloy

Majidi, Omid, Jahazi, Mohammad et Bombardier, Nicolas. 2018. « Characterization of mechanical properties and formability of a superplastic Al-Mg alloy ». In NUMISHEET 2018: 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (Tokyo, Japan, July 30-Aug. 6, 2018) Coll. « Journal of Physics: Conference Series », vol. 1063. IOP Publishing.
Compte des citations dans Scopus : 3.

Prévisualisation

PDF Jahazi M 2018 17250 Characterization of mechanical properties.pdf - Version publiée Licence d'utilisation : Creative Commons CC BY. Télécharger (1MB) | Prévisualisation

Résumé

In order to develop a reliable constitutive model for predicting formability and springback of sheet metals during superplastic forming (SPF) and quick plastic forming (QPF), characterization of elastic-plastic behavior, as well as formability of the material is essential. In the present study, the module of elasticity, uniaxial flow behavior and anisotropy, as well as the forming limit curve (FLC) of one of an SPF/QPF grade AA5083 was investigated. The variation of Young's modulus with temperature was measured from the uniaxial tensile tests for four temperatures ranging from 25 to 500 °C. The impact of temperature and strain rate on the flow behavior of the material was investigated via uniaxial tensile tests for three temperatures (420, 450, and 480 °C) and at three strain rates (0.001, 0.01, and 0.1 s−1). The dependency of the flow stress on the material orientation with respect to the rolling direction (0, 45, and 90°) was assessed using uniaxial tensile tests at a constant temperature. In addition, the evolution of plastic anisotropy with plastic strain and strain rate was assessed by measuring the Lankford coefficient (r-value). Finally, the FLC of the material at 450 °C was characterized according to Nakazima tests procedure for three strain paths (i.e. uniaxial tension, plane strain, and biaxial tension).

Type de document:	Compte rendu de conférence
ISBN:	1742-6596
Professeur:	Professeur Jahazi, Mohammad
Affiliation:	Génie mécanique
Date de dépôt:	16 août 2018 13:35
Dernière modification:	20 août 2018 14:47
URI:	https://espace2.etsmtl.ca/id/eprint/17250

Actions (Authentification requise)

Dernière vérification avant le dépôt