ENGLISH
La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS
RECHERCHER

L'affiliation est "Génie de la production automatisée"

Exporter en format [Atom feed] Atom [RSS feed] RSS 1.0 [RSS2 feed] RSS 2.0
Groupement par Professeur | Année | Type de document | Sans groupement
Nombre de documents archivés : 180.

Aissaoui, Rachid

Desmarais, M. et Aissaoui, R.. 2007. « Effect of variable contact area on knee articular dissipation during 3D gait analysis ». In Proceedings of the IASTED International Conference on Modelling and Simulation (Montreal, QC, Canada, May 30-June 01, 2007) pp. 613-617. Anaheim, CA : ACTA Press.

Desroches, G., Aissaoui, Rachid, Boukhelif, M. et Bourbonnais, D.. 2007. « Measurement uncertainties during manual wheelchair propulsion and shoulder kinetics ». In Proceedings of the IASTED International Conference on Modelling and Simulation (Montréal, Canada, May 30-June 1, 2007) pp. 618-623. Calgary, Canada : ACTA Press.
Compte des citations dans Scopus : 1.

Lalonde, Nadine-Michèle, Dansereau, Jean, Lacoste, Michèle et Aissaoui, Rachid. 2007. « Modelling skin pelvic landmark coordinates into corresponding internal bone for wheelchair users ». IEEE Transactions on Biomedical Engineering, vol. 54, nº 1. pp. 11-18.
Compte des citations dans Scopus : 4.

Mezghani, N., Aissaoui, Rachid, Boivin, K., de Guise, Jacques A., Hagemeister, Nicola et Turcot, K.. 2007. « Analyse et classification automatique de données cinétiques provenant de sujets asymptomatiques et arthrosiques ». Affiche numéro 103 présentée lors de la conférence : 62nd Canadian Orthopaedic Association Annual Meeting : Joints & Arthritis (Halifax, NS, Canada, 1-3 juin 2007).

Mezghani, N., Boivin, K., Turcot, K., Aissaoui, Rachid, Hagemeister, Nicola et de Guise, Jacques A.. 2007. « Analyse et classification automatique de données cinétiques provenant de sujets asymptomatiques et gonarthrosiques ». Affiche numéro 60 présentée lors de la conférence : 27e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montreal, QC, Canada, Avril 2007).

Turcot, K., Boivin, K., Aissaoui, Rachid, Hagemeister, Nicola, Pelletier, M. et de Guise, Jacques A.. 2007. « Fidélité et changement clinique minimal des accélérations 3D lors d'une évaluation locomotrice de patients gonarthrosiques ». Affiche numéro 52 présentée lors de la conférence : 27e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, Avril 2007).

Artiba, Abdelhakim

Duvivier, David, Roux, O., Dhaevers, V., Meskens, N. et Artiba, Abdelhakim. 2007. « Multicriteria optimisation and simulation: an industrial application ». Annals of Operations Research, vol. 156, nº 1. pp. 45-60.
Compte des citations dans Scopus : 10.

Tchikou, Mahmoud, Gouarderes, Eric, Ramudhin, Amar, Artiba, Abdelhakim et Lamarque, Nicholas. 2007. « Agent-based approach for manufacturing dynamic scheduling ». In International Conference on Service Systems and Service Management (SSSM) (Troyes, France, Oct. 25-27, 2006) pp. 834-840. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Bigras, Pascal

Bigras, P., Lambert, M. et Perron, C.. 2007. « New formulation for an industrial robot force controller: Real-time implementation on a KUKA robot ». In IEEE International Conference on Systems, Man and Cybernetics (SMC) (Montréal, QC, Canada, Oct. 07-10, 2007) pp. 2794-2799. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 4.

Bigras, Pascal, Lambert, Michel et Perron, Claude. 2007. « New formulation for an industrial robot impedance controller: Real-time implementation on a KUKA robot ». In IEEE International Conference on Systems, Man and Cybernetics (SMC) (Montreal, Canada, Oct. 7-10, 2007) pp. 2782-2787. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Figielski, A., Bonev, Ilian et Bigras, Pascal. 2007. « Towards development of a 2-DOF planar parallel robot with optimal workspace use ». Communication lors de la conférence : IEEE International Conference on Systems, Man and Cyvernetics (SMC) (Montreal, QC, Canada, Oct. 7-10, 2007).

Figielski, Alexandre, Bonev, Ilian et Bigras, Pascal. 2007. « Towards development of a 2-DOF planar parallel robot with optimal workspace use ». In IEEE International Conference on Systems, Man and Cybernetics (SMC) (Montreal, Canada, Oct. 7-10, 2007) pp. 1562-1566. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 20.

Grami, S. et Bigras, Pascal. 2007. « Identification of a new friction model bases on robust adaptive observer ». Communication lors de la conférence : International Multi-Conference on Systems, Signals and Devices (Hammamet, Tunisia, Mar. 19-22, 2007).

Khayati, Karim et Bigras, Pascal. 2007. « A new model-based dynamic feedback control for systems with friction ». In IEEE International Conference on Systems, Man and Cybernetics (SMC) (Montreal, Canada, Oct. 7-10, 2007) pp. 2710-2715. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 5.

Lessard, S., Bigras, Pascal, Bonev, Ilian, Briot, S. et Arakelyan, V.. 2007. « Optimum static balancing of the parallel robot for medical 3D-ultrasound imaging ». In 12th World Congress in Mechanism and Machine Science (Besançon, France, June 18-21, 2007)

Lessard, Simon, Bigras, Pascal et Bonev, Ilian A.. 2007. « A new medical parallel robot and its static balancing optimization ». Journal of Medical Devices , vol. 1, nº 4. pp. 272-278.
Compte des citations dans Scopus : 53.

Bonev, Ilian

Bonev, Ilian. 2007. « Les robots parallèles : de la recherche vers les applications ». Communication lors de la conférence : Journées Nationales de la Recherche en Robotique (Obernai, France, 9-12 oct. 2007).

Briot, Sébastien et Bonev, Ilian. 2007. « Are parallel robots more accurate than serial robots? ». Transactions of the Canadian Society for Mechanical Engineering, vol. 31, nº 4. pp. 445-455.
Compte des citations dans Scopus : 97.

Figielski, A., Bonev, Ilian et Bigras, Pascal. 2007. « Towards development of a 2-DOF planar parallel robot with optimal workspace use ». Communication lors de la conférence : IEEE International Conference on Systems, Man and Cyvernetics (SMC) (Montreal, QC, Canada, Oct. 7-10, 2007).

Figielski, Alexandre, Bonev, Ilian et Bigras, Pascal. 2007. « Towards development of a 2-DOF planar parallel robot with optimal workspace use ». In IEEE International Conference on Systems, Man and Cybernetics (SMC) (Montreal, Canada, Oct. 7-10, 2007) pp. 1562-1566. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 20.

Lessard, S., Bigras, Pascal, Bonev, Ilian, Briot, S. et Arakelyan, V.. 2007. « Optimum static balancing of the parallel robot for medical 3D-ultrasound imaging ». In 12th World Congress in Mechanism and Machine Science (Besançon, France, June 18-21, 2007)

Lessard, Simon, Bigras, Pascal et Bonev, Ilian A.. 2007. « A new medical parallel robot and its static balancing optimization ». Journal of Medical Devices , vol. 1, nº 4. pp. 272-278.
Compte des citations dans Scopus : 53.

Zsombor-Murray, P., Bonev, Ilian et El Fashny, S.. 2007. « Displacement ». In Proceedings : Obergurgl, Austria, February 21 - 26, 2006 (Obergurgul, Autriche, Feb. 21-26, 2006) Obergurgl.

Botez, Ruxandra

Anton, Nicoleta, Popescu, Dumitru et Botez, Ruxandra Mihaela. 2007. « Estimation of stability derivatives from aircraft geometrical data for use in simulator applications ». In 31st Congress of the American Romanian Academy of Arts and Sciences (ARA) (Brasov, Romania, July 31-Aug. 5, 2007)

Beaulieu, M. N., De Jesus Mota, S. et Botez, Ruxandra M.. 2007. « Identification of structural surfaces' positions on an F/A-18 using the subspace identification method from flight flutter tests ». Proceedings of the Institution of Mechanical Engineers, Part G : Journal of Aerospace Engineering, vol. 221, nº 5. pp. 719-731.
Compte des citations dans Scopus : 10.

Beaulieu, Michel Nadeau, Botez, Ruxandra M. et Hiliuta, Adrian. 2007. « Ground dynamics model validation by use of landing flight test ». Journal of Aircraft, vol. 44, nº 6. pp. 2063-2068.
Compte des citations dans Scopus : 3.

Birla, L., Botez, Ruxandra, Popov, A. et Coutu, D.. 2007. « Validation of laminar to turbulent transition on a wing airfoil ». In CASI Aircraft Design & Development ADD Symposium 2007 Conference (Toronto, ON, Canada, Apr. 25-26, 2007) Canadian Aeronautics and Space Institute.

Biskri, D. E. et Botez, Ruxandra. 2007. « Method for aerodynamic forces optimizations based on an analytical error formulation ». In Proceedings - 7th World Congress of Structural and Multidisciplinary Optimization : May 21 - 25, 2007, Seoul, Korea (Seoul, South Korea, May 21-25, 2007)

Botez, Ruxandra M., Dinu, Alin Dorian et Cotoi, Iulian. 2007. « Method based on Chebyshev polynomials for aeroservoelastic interactions on an F/A-18 aircraft ». Journal of Aircraft, vol. 44, nº 1. pp. 330-333.
Compte des citations dans Scopus : 2.

Botez, Ruxandra M. et Rotaru, M.. 2007. « Relationships between flying qualities and flight tests parameters for the F/A-18 aircraft ». Aeronautical Journal, vol. 111, nº 1118. pp. 281-282.

Botez, Ruxandra Mihaela et Biskri, Djallel Eddine. 2007. « Unsteady aerodynamic forces mixed method for aeroservoelasticity studies on an F/A-18 aircraft ». Journal of Aircraft, vol. 44, nº 4. pp. 1378-1383.
Compte des citations dans Scopus : 3.

Botez, Ruxandra Mihaela, Dinu, Alin Dorian, Cotoi, Iulian, Stathopoulos, Nicholas, Therien, Sylvain, Dickinson, Martin et Rath, Alexandre. 2007. « Improved method for creating time-domain unsteady aerodynamic models ». Journal of Aerospace Engineering, vol. 20, nº 3. pp. 204-208.
Compte des citations dans Scopus : 3.

Botez, Ruxandra, Fayard, B., Alban, B., Dionne, P., Mamert, A. et Popescu, D.. 2007. « Stability derivatives calculations and integrations on an aircraft flight model ». In 12th Australian International Aerospace Conference (AIAC) (Melbourne, Australia, Mar. 19-22, 2007)

Botez, Ruxandra, Hiliuta, A. et Grigorie, L.. 2007. « Simulation method for rigid and control modes aeroservoelastic interactions ». In Proceedings of the IASTED International Conference on Modelling, Identification, and Control, MIC (Innsbruck, Austria, Feb.12-14, 2007) pp. 229-233. Calgary, Canada : ACTA Press.

Botez, Ruxandra, Molaret, P. et Laurendeau, E.. 2007. « Laminar flow control on a research wing - project presentation on a three years period ». In CASI Aircraft Design & Development ADD Symposium 2007 Conference (Toronto, ON, Canada, Apr. 25-26, 2007) Canadian Aeronautics and Space Institute.

Botez, Ruxandra et Rotaru, M.. 2007. « Analysis of flying qualities for an F/A-18 aircraft ». In Proceedings of the 16th IASTED International Conference on Applied Simulation and Modelling (Palma de Mallorca, Spain, Aug. 29-31, 2007) pp. 219-223. Calgary, Canada : ACTA Press.

Botez, Ruxandra et Rotaru, M.. 2007. « Relationships between flying qualities and flight test parameters for the F/A-18 Aircraft ». In CASI Aircraft Design & Development ADD Symposium 2007 Conference (Toronto, ON, Canada, Apr. 25-26, 2007) Canadian Aeronautics and Space Institute.

De Jesus Mota, S., Nadeau Beaulieu, M. et Botez, Ruxandra. 2007. « Subspace method for an F/A-18 aircraft model identification from flight tests ». In International Forum on Aeroelasticity and Structural Dynamics (IFASD) (Stockholm, Sweden, June 18-20, 2007)

De Jesus Mota, S., Nadeau-Beaulieu, M., Botez, Ruxandra et Brenner, M.. 2007. « Modeling of structural deflections on a F/A-18 aircraft following flight flutter tests by use of subspace identification method ». In AIAA Atmospheric Flight Mechanics Conference and Exhibit (Hilton Head, SC, USA, Aug. 20-23, 2007) Coll. « AIAA paper » pp. 42-53. Reston, VA, USA : American Institute of Aeronautics and Astronautics Inc..
Compte des citations dans Scopus : 3.

Grigorie, Lucian Teodor et Botez, Ruxandra. 2007. « Validation of aeroservoelastic interactions between the rigid, elastic and control modes ». In 31st Congress of the American Romanian Academy of Arts and Sciences (ARA) (Brasov, Romania, July 31-Aug. 5, 2007) ARA.

Hiliuta, A. et Botez, Ruxandra M.. 2007. « Flight dynamics helicopter model validation based on flight test data ». [Résumé d'une communication à une conférence]. Proceedings of the Institution of Mechanical Engineers, Part G : Journal of Aerospace Engineering, vol. 221, nº 5. pp. 757-765.
Compte des citations dans Scopus : 3.

Labib, M., Botez, Ruxandra et Popov, A.. 2007. « Determination of the transition point on the upper surface of a wing airfoil ». In CASI Aircraft Design & Development ADD Symposium 2007 Conference (Toronto, ON, Canada, Apr. 25-26, 2007) Canadian Aeronautics and Space Institute.

Nadeau Beaulieu, M., De Jesus Mota, M. et Botez, Ruxandra. 2007. « F/A-18 active aeroelastic wing aircraft model identification from flight flutter test data ». In CASI Aircraft Design & Development ADD Symposium 2007 Conference (Toronto, ON, Canada, Apr. 25-26, 2007) Canadian Aeronautics and Space Institute.

Nadeau Beaulieu, M., De Jesus Mota, S. et Botez, Ruxandra. 2007. « Flight model identification of an F/A-18 from flight tests ». In 17th IFAC Symposium on Automatic Control in Aerospace (ACA) (Toulouse, France, June 25-29, 2007) pp. 212-216. Laxenburg, Australia : International Federation of Automatic Control.
Compte des citations dans Scopus : 1.

Chaabane, Amin

Chaabane, Amine, Benkaddour, M.A., Ramudhin, Amar et Paquet, Marc. 2007. « Incorporating safety stock considerations in supply chain design ». Communication lors de la conférence : Optimisation Days = Les Journées de l'Optimisation (Montreal, QC, Canada, May 8, 2007).

Cheriet, Mohamed

Adankon, Mathias M. et Cheriet, Mohamed. 2007. « Learning semi-supervised SVM with genetic algorithm ». In International Joint Conference on Neural Networks (IJCNN) (Orlando, FL, USA, Aug. 12-17, 2007) pp. 1825-1830. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 8.

Adankon, Mathias M. et Cheriet, Mohamed. 2007. « Optimizing resources in model selection for support vector machine ». Pattern Recognition, vol. 40, nº 3. pp. 953-963.
Compte des citations dans Scopus : 37.

Al-Ohali, Y., Alanzi, A., Suen, C.Y., Kasvand, T. et Cheriet, Mohamed. 2007. « Combined measures toward restoration of temporal information from offline handwritten text ». In 9th International Symposium on Signal Processing and its Applications (ISSPA) (Sharjah, United Arab Emirates, Feb. 12-15, 2007) Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Bengharabi, M., Harizi, F., Cheriet, Mohamed et Guessoum, A.. 2007. « A framework for a GMM-UBM based speaker verification and the need of a large Arabic datebase ». In 9th International Symposium on Signal Processing and its Applications (ISSPA) (Sharjah, United Arab Emirates, Feb. 12-15, 2007) Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 1.

Cheriet, Mohamed. 2007. « Strategies for visual Arabic handwriting recognition, issues and case study ». In 9th International Symposium on Signal Processing and its Applications (ISSPA) (Sharjah, United Arab Emirates, Feb. 12-15, 2007) Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 4.

Cheriet, Mohamed, Al-Ohali, Y., Ayat, N. et Suen, C.Y.. 2007. « Arabic cheque processing system : issues and future trends ». In Digital document processing : major directions and recent advances. pp. 213-234. London : Springer-Verlag London Limited.

Cheriet, Mohamed, Kharma, Nawwaf, Liu, Cheng-Lin et Suen, Ching. 2007. « Character recognition systems : a guide for students and practioners ». Hoboken, N.J., USA : Wiley-Interscience. 326 p.
Compte des citations dans Scopus : 244.

Doré, Vincent, Duong, Luc, Cheriet, Farida et Cheriet, Mohamed. 2007. « Towards segmentation of pedicles on posteroanterior X-ray views of scoliotic patients ». In Image Analysis and Recognition : 4th International Conference, ICIAR 2007, Montreal, Canada, August 22-24, 2007. Proceedings (Montreal, Canada, Aug. 22-24, 2007) Coll. « Lecture Notes in Computer Science », vol. 4633. pp. 1028-1039. Heidelberg, Germany : Springer Verlag.
Compte des citations dans Scopus : 3.

Kharma, N., Moghnieh, H., Yao, J., Guo, Y. P., Abu-Baker, A., Laganiere, J., Rouleau, G. et Cheriet, Mohamed. 2007. « Automatic segmentation of cells from microscopic imagery using ellipse detection ». IET Image Processing, vol. 1, nº 1. pp. 39-47.
Compte des citations dans Scopus : 49.

Menasri, F., Vincent, N., Augustin, E. et Cheriet, Mohamed. 2007. « Shape-based alphabet for off-line Arabic handwriting recognition ». In 9th International Conference on Document Analysis and Recognition (ICDAR) (Curitiba, Brazil, Sept. 23-26, 2007) pp. 969-973. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 33.

Rivest-Hénault, David et Cheriet, Mohamed. 2007. « Image segmentation using level set and local linear approximations ». In Image Analysis and Recognition : 4th International Conference, ICIAR 2007, Montreal, Canada, August 22-24, 2007. Proceedings (Montreal, Canada, Aug. 22-24, 2007) Coll. « Lecture Notes in Computer Science », vol. 4633. pp. 234-245. Berlin, Germany : Springer-Verlag.

Saryazdi, Saeid et Cheriet, Mohamed. 2007. « PKCS: a polynomial kernel family with compact support for scale-space image processing ». IEEE Transactions on Image Processing, vol. 16, nº 9. pp. 2299-2308.
Compte des citations dans Scopus : 14.

Seddik, H., Sayadi, M., Fnaiech, F. et Cheriet, Mohamed. 2007. « A new multi-domains image watermarking method based on multi-watermarks embedding and neural network segmentation ». Applied Mathematical Sciences, vol. 1, nº 39. pp. 1927-1939.

Sehad, A., Mezai, L., Laskri, M.T. et Cheriet, Mohamed. 2007. « Skew angle estimation of printed document using linear regression, wavelet transform, and anisotropic diffusion ». In 9th International Symposium on Signal Processing and its Applications (ISSPA) (Sharjah, United Arab Emirates, Feb. 12-15, 2007) Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 1.

Clément, Julien

Jaafar, E., Petit, Yvan, Mark, L., Clément, J., Lussier, B. et Hagemeister, Nicola. 2007. « Étude cinématique de la phase d'appui au trot chez le chien : conception d'un montage expérimental ». Affiche présentée lors de la conférence : VIIe Journée de la Recherche de l’Hôpital du Sacré-Coeur de Montréal (Montréal, QC, Canada, 22 juin 2007).

De Kelper, Bruno

Barrette, Mathieu, De Kelper, Bruno et Wong, Tony. 2007. « Statistical comparison of evolutionary algorithms ». In Smart systems engineering : computational intelligence in architecting complex engineering systems : proceedings of the Artificial Neural Networks in Engineering (ANNIE ...) Conference (St-Louis, MO, USA, Nov. 11-14, 2007) Coll. « ASME Press Series on Intelligent Engineering Systems Through Artificial Neural Networks », vol. 17. pp. 237-245. ASME Press.

Barrette, Mathieu, Wong, Tony et De Kelper, Bruno. 2007. « Evolutionary algorithms performance evaluation using rank-based multiple comparison procedure ». In WMSCI 2007 - The 11th World Multi-Conference on Systemics, Cybernetics and Informatics, Jointly with the 13th International Conference on Information Systems Analysis and Synthesis, ISAS 2007 - Proc. (Orlando, FL, USA, July 8-11, 2007) pp. 35-40. Paris, France : International Social Science Council.

Duong, Luc

Doré, Vincent, Duong, Luc, Cheriet, Farida et Cheriet, Mohamed. 2007. « Towards segmentation of pedicles on posteroanterior X-ray views of scoliotic patients ». In Image Analysis and Recognition : 4th International Conference, ICIAR 2007, Montreal, Canada, August 22-24, 2007. Proceedings (Montreal, Canada, Aug. 22-24, 2007) Coll. « Lecture Notes in Computer Science », vol. 4633. pp. 1028-1039. Heidelberg, Germany : Springer Verlag.
Compte des citations dans Scopus : 3.

Gauthier, Guy

Gauthier, Guy et Boulet, B.. 2007. « Robust design of terminal ILC with H-infinity mixed sensitivity approach for thermoforming oven ». In 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007) Montréal : École de technologie supérieure.

Gharbi, Ali

Berthaut, F., Pellerin, R. et Gharbi, Ali. 2007. « Contrôle de systèmes hybrides de réfection et de réparation avec disponibilité probabiliste des pièces de rechange ». In 7e Congrès International de Génie Industriel (Trois-Rivières, QC, Canada, 5-8 juin 2007)

Boulet, J.F., Gharbi, Ali et Kenné, Jean-Pierre. 2007. « Amélioration d'une politique combinée de maintenance et de contrôle d'inventaire dans un contexte manufacturier ». In 7e Congrès International de Génie Industriel (Trois-Rivières, QC, Canada, 5-8 juin 2007)

Boulet, J.F., Gharbi, Ali et Kenné, Jean-Pierre. 2007. « Multiobjective optimization of preventive and corrective maintenance policies in unreliable manufacturing systems ». In International Conference on Industrial Engineering and Systems Management (IESM) (Beijing, China, May 30-June 2, 2007)

Dhouib, K., Gharbi, Ali et Ayed, S.. 2007. « Throughput assessment of non-homogeneous transfer lines: simulation modeling based approach ». In International Conference on Industrial Engineering and Systems Management (IESM) (Beijing, China, May 30-June 2, 2007)

Fourati, Salma, Chelbi, Anis et Gharbi, Ali. 2007. « Système de e-maintenance pour l'aide au diagnostic à distance des pannes ». In 12th International Conference of the Association Information and Management (AIM 2007) (Lausanne, Suisse, 18-19 juin 2007) France : Association Information and Management (AIM).

Gharbi, Ali, Kenné, Jean-Pierre et Beit, M.. 2007. « Optimal safety stocks and preventive maintenance periods in unreliable manufacturing systems ». International Journal of Production Economics, vol. 107, nº 2. pp. 422-434.
Compte des citations dans Scopus : 60.

Hajji, A., Gharbi, Ali et Kenné, Jean-Pierre. 2007. « Joint optimal production / setup policies for three family products in unreliable supply chains ». In International Conference on Industrial Engineering and Systems Management (IESM) (Beijing, China, May 30-June 2, 2007)

Kenné, Jean-Pierre, Gharbi, Ali et Beit, M.. 2007. « Age-dependent production planning and maintenance strategies in unreliable manufacturing systems with lost sale ». European Journal of Operational Research, vol. 178, nº 2. pp. 408-420.
Compte des citations dans Scopus : 74.

Lavoie, P., Kenné, Jean Pierre et Gharbi, Ali. 2007. « Production control and combined discrete/continuous simulation modeling in failure-prone transfer lines ». International Journal of Production Research, vol. 45, nº 24. pp. 5667-5685.
Compte des citations dans Scopus : 15.

Pellerin, R. et Gharbi, Ali. 2007. « Production control of remanufacturing systems with general repair time distributions ». In International Conference on Industrial Engineering and Systems Management (IESM) (Beijing, China, May 30-June 2, 2007)

Pellerin, Robert, Boulet, Jean-François, Gharbi, Ali et Kenné, Jean-Pierre. 2007. « Développement d'une politique intégrée de contrôle des taux de production et de maintenance corrective avec diagnostic ». INFOR : Information Systems and Operational Research, vol. 45, nº 4. pp. 197-207.
Compte des citations dans Scopus : 3.

Granger, Éric

Barry, M. et Granger, Éric. 2007. « Comparison of ARTMAP neural networks for classification for face recognition from video ». In Image Analysis and Recognition : 4th International Conference, ICIAR 2007, Montreal, Canada, August 22-24, 2007. Proceedings (Montreal, Canada, Aug. 22-24, 2007) Coll. « Lecture Notes in Computer Science », vol. 4633. pp. 794-805. Heidelberg, Germany : Springer Verlag.
Compte des citations dans Scopus : 1.

Barry-Camerra, M. et Granger, Éric. 2007. « Face recognition in video using a what-and-where fusion neural network ». In International Joint Conference on Neural Networks (IJCNN) (Orlando, FL, USA, Aug. 12-17, 2007) pp. 2255-2260. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 11.

Granger, Éric, Henniges, Philippe, Sabourin, Robert et Oliveira, Luiz S.. 2007. « Supervised learning of fuzzy ARTMAP neural networks through particle swarm optimization ». Journal of Pattern Recognition Research, vol. 2, nº 1. pp. 27-60.

Latombe, Guillaume, Granger, Éric et Dilkes, Fred A.. 2007. « Incremental learning of stochastic grammars with graphical EM in radar electronic support ». In IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) (Honolulu, HI, USA, April 15-20, 2007) pp. 301-304. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 2.

Hagemeister, Nicola

Chailleux, Nadège, Lussier, Bertrand, de Guise, Jacques A., Chevalier, Yan et Hagemeister, Nicola. 2007. « In vitro 3-dimensional kinematic evaluation of 2 corrective operations for cranial cruciate ligament-deficient stifle ». Canadian Journal of Veterinary Research , vol. 71, nº 3. pp. 175-180.
Compte des citations dans Scopus : 40.

Collet, Y., Tétreault, P., Rasmussen, J., Nuño, N. et Hagemeister, N.. 2007. « Computational modeling of a prosthetic shoulder: Our experience with the anybody modeling system ». In 18th IASTED International Conference on Modelling and Simulation (Montréal, QC, Canada, May 30-June 01, 2007) pp. 624-629. ACTA Press.
Compte des citations dans Scopus : 2.

Fuentes, A., Hagemeister, Nicola, Ranger, P., Heron, T. et de Guise, Jacques A.. 2007. « Augmentation du moment adducteur suite à une rupture du ligament croisé antérieur ». Affiche numéro 59 présentée lors de la conférence : 10e Congrès Annuel des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montréal, Canada, 18 déc. 2007).

Fuentes, A., Hagemeister, Nicola, Südhoff, I., Fernandes, J., Ranger, P. et de Guise, Jacques A.. 2007. « New 3D biomedical and imaging technologies to evaluate the effect of anterior cruciate ligament reconstruction : preliminary results ». [Résumé d'une communication à une conférence]. Clinical Journal of Sports Medicine, vol. 17, nº 2. p. 165.

Fuentes, A., Hagemeister, Nicola, Südhoff, I., Requiao, L., Fernandes, J., Ranger, P. et de Guise, Jacques A.. 2007. « Effets d'une rupture du ligament croisé antérieur sur la biomécanique 3D du genou: résultats préliminaires ». Affiche numéro 50 présentée lors de la conférence : 27e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, Avril 2007).

Fuentes, Alexandre, Hagemeister, Nicola, Ranger, Pierre, Heron, Timothy et de Guise, Jacques A.. 2007. « ACL rupture increases knee adduction moment during gait ». In 6th Combined Meeting of the Orthopedic Research Societies (Honolulu, HI, USA, Oct. 21-24, 2007) p. 36.

Jaafar, E., Petit, Yvan, Mark, L., Clément, J., Lussier, B. et Hagemeister, Nicola. 2007. « Étude cinématique de la phase d'appui au trot chez le chien : conception d'un montage expérimental ». Affiche présentée lors de la conférence : VIIe Journée de la Recherche de l’Hôpital du Sacré-Coeur de Montréal (Montréal, QC, Canada, 22 juin 2007).

Kiss, M-O, Hagemeister, N., Levasseur, A., Fernandes, J., Lussier, B. et Petit, Y.. 2007. « Utilisation d'une pince à refroidissement thermiélectrique lors d'essais in vitro de traction cyclique et de tests à bris ». Communication lors de la conférence : 27e Journée de la Recherche du POES et de la Division d'Orthopédique de l'Université de Montréal (Montréal, QC, Canada, 20 avril 2007).

Labbé, D., Hagemeister, Nicola, Fernades, J. et de Guise, Jacques A.. 2007. « Développement et validation d'un outil de mesure du phénomène de Pivot Shift dans le genou : résultats préliminaires ». Affiche numéro 76 présentée lors de la conférence : 10e Congrès Annuel des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montréal, Canada, 18 déc. 2007).

Levasseur, Annie, Tetreault, Patrice, de Guise, Jacques A., Nuño, Natalia et Hagemeister, Nicola. 2007. « The effect of axis alignment on shoulder joint kinematics analysis during arm abduction ». Clinical Biomechanics, vol. 22, nº 7. pp. 758-766.
Compte des citations dans Scopus : 15.

Mezghani, N., Aissaoui, Rachid, Boivin, K., de Guise, Jacques A., Hagemeister, Nicola et Turcot, K.. 2007. « Analyse et classification automatique de données cinétiques provenant de sujets asymptomatiques et arthrosiques ». Affiche numéro 103 présentée lors de la conférence : 62nd Canadian Orthopaedic Association Annual Meeting : Joints & Arthritis (Halifax, NS, Canada, 1-3 juin 2007).

Mezghani, N., Boivin, K., Turcot, K., Aissaoui, Rachid, Hagemeister, Nicola et de Guise, Jacques A.. 2007. « Analyse et classification automatique de données cinétiques provenant de sujets asymptomatiques et gonarthrosiques ». Affiche numéro 60 présentée lors de la conférence : 27e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montreal, QC, Canada, Avril 2007).

Turcot, K., Boivin, K., Aissaoui, Rachid, Hagemeister, Nicola, Pelletier, M. et de Guise, Jacques A.. 2007. « Fidélité et changement clinique minimal des accélérations 3D lors d'une évaluation locomotrice de patients gonarthrosiques ». Affiche numéro 52 présentée lors de la conférence : 27e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, Avril 2007).

Kenné, Jean-Pierre

Boulet, J.F., Gharbi, Ali et Kenné, Jean-Pierre. 2007. « Amélioration d'une politique combinée de maintenance et de contrôle d'inventaire dans un contexte manufacturier ». In 7e Congrès International de Génie Industriel (Trois-Rivières, QC, Canada, 5-8 juin 2007)

Boulet, J.F., Gharbi, Ali et Kenné, Jean-Pierre. 2007. « Multiobjective optimization of preventive and corrective maintenance policies in unreliable manufacturing systems ». In International Conference on Industrial Engineering and Systems Management (IESM) (Beijing, China, May 30-June 2, 2007)

Gharbi, Ali, Kenné, Jean-Pierre et Beit, M.. 2007. « Optimal safety stocks and preventive maintenance periods in unreliable manufacturing systems ». International Journal of Production Economics, vol. 107, nº 2. pp. 422-434.
Compte des citations dans Scopus : 60.

Hajji, A., Gharbi, Ali et Kenné, Jean-Pierre. 2007. « Joint optimal production / setup policies for three family products in unreliable supply chains ». In International Conference on Industrial Engineering and Systems Management (IESM) (Beijing, China, May 30-June 2, 2007)

Kenné, Jean-Pierre, Gharbi, Ali et Beit, M.. 2007. « Age-dependent production planning and maintenance strategies in unreliable manufacturing systems with lost sale ». European Journal of Operational Research, vol. 178, nº 2. pp. 408-420.
Compte des citations dans Scopus : 74.

Lavoie, P., Kenné, Jean Pierre et Gharbi, Ali. 2007. « Production control and combined discrete/continuous simulation modeling in failure-prone transfer lines ». International Journal of Production Research, vol. 45, nº 24. pp. 5667-5685.
Compte des citations dans Scopus : 15.

Pellerin, Robert, Boulet, Jean-François, Gharbi, Ali et Kenné, Jean-Pierre. 2007. « Développement d'une politique intégrée de contrôle des taux de production et de maintenance corrective avec diagnostic ». INFOR : Information Systems and Operational Research, vol. 45, nº 4. pp. 197-207.
Compte des citations dans Scopus : 3.

Landry, Jacques-André

Chion, C., Turgeon, S., Landry, Jacques-André, Parrott, L., Marceau, D., Michaud, R., Cantin, G. et Dionne, S.. 2007. « Agent-based modelling of whale-watching cruise operators’ behaviour using a cognitive approach ». Communication lors de la conférence : International Conference on Complex Systems (ICCS) (Boston, MA, USA, Oct. 28-Nov. 2, 2007).

Da Costa, Luis, Landry, Jacques-André et Levasseur, Y.. 2007. « Treating noisy data sets with relaxed genetic programming ». Communication lors de la conférence : 8th International Conference on Artificial Evolution (EA) (Tours, France, Oct. 29-31, 2007).

Lepage, Richard

Chherawala, Y., Gagnon, O., Lepage, Richard et Doyon, G.. 2007. « Impact de la variation des paramètres scéniques sur la fidélité colorimétrique d'images numériques de denrées alimentaires ». In Actes des 5e Ateliers sur Traitement et Analyse de l'Information : Méthodes et Applications (TAIMA) (Hammamet, Tunisie, 23-26 mai 2007) pp. 325-330.

Lepage, Richard. 2007. « Impact de la variation des paramètres scéniques sur la fidélité colorimétrique d'images numériques de denrées alimentaires ». Communication lors de la conférence : Traitement et Analyse de l'Information, Méthodes et Applications (TAIMA) (Hammamet, Tunisie, 22-26 mai 2007).

Lepage, Richard. 2007. « Traitement informatisé de l'image pour prédire la teneur en pigments (anthocyanes) et réduction des résidus chimiques dans l'environnement d'usine alimentaire : Une technologie non-destructive ». Communication lors de la conférence : Centre de Recherche et Développement sur les Aliments (Saint-Hyacinthe, QC, Canada, 1 mai 2007).

Lerouge, Sophie

Marchane, I., de Guise, Jacques A., Cloutier, G. et Lerouge, Sophie. 2007. « Segmentation de coupes histologiques pour l'analyse histomorphométrique de plaques d'athérosclérose ». Affiche numéro 9 présentée lors de la conférence : 10e Congrès Annuel des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montréal, Canada, 18 déc. 2007).

Maranzana, Roland

Maranzana, Roland, Msaaf, Omar et Rivest, Louis. 2007. « Interprétation des modèles géométriques 3D : application à la recherche de pièces et à la comparaison de leurs représentations géométriques ». Communication lors de la conférence : 75e Congrès de l'Association Francophone pour le Savoir (ACFAS) (Trois-Rivières, QC, Canada, 7-11 mai 2007).

Mascle, Christian, Lu, Hua et Maranzana, Roland. 2007. « Machining process planning using decomposition of delta volume ». In IEEE International Symposium on Assembly and Manufacturing (Ann Arbor, MI, USA, Jul. 22-25, 2007) pp. 106-111. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 5.

Msaaf, Omar, Maranzana, Roland et Rivest, Louis. 2007. « Part data mining for information re-use in a PLM context ». In ASME Turbo Expo 2007: Power for Land, Sea, and Air (Montreal, QC, Canada, May 14-17, 2007) pp. 187-194. New York, NY, USA : American Society of Mechanical Engineers.
Compte des citations dans Scopus : 9.

Nuño, Natalia

Collet, Y., Tétreault, P., Rasmussen, J., Nuño, N. et Hagemeister, N.. 2007. « Computational modeling of a prosthetic shoulder: Our experience with the anybody modeling system ». In 18th IASTED International Conference on Modelling and Simulation (Montréal, QC, Canada, May 30-June 01, 2007) pp. 624-629. ACTA Press.
Compte des citations dans Scopus : 2.

Levasseur, Annie, Tetreault, Patrice, de Guise, Jacques A., Nuño, Natalia et Hagemeister, Nicola. 2007. « The effect of axis alignment on shoulder joint kinematics analysis during arm abduction ». Clinical Biomechanics, vol. 22, nº 7. pp. 758-766.
Compte des citations dans Scopus : 15.

Madrala, A. et Nuño, Natalia. 2007. « Effect of stem and bone cement initial temperature in cemented THA on maximum temperatures and radial stresses at stem/cement interface during PMMA polymerization ». [Article de conférence]. Computer Methods in Biomechanics and Biomedical Engineering, vol. 10, nº Suppl. 1. pp. 45-46.

Madrala, A., Nuño, Natalia et Bureau, M. N.. 2007. « Microstructure study on bone cement mantle polymerised in an idealized specimen of cemented hip implants with different initial temperature of the stem and bone cement ». [Article de conférence]. Computer Methods in Biomechanics and Biomedical Engineering, vol. 10, nº Suppl. 1. pp. 67-68.

Vendittoli, Pascal-André, Ganapathi, Muthu, Nuño, Natalia, Plamondon, Dominic et Lavigne, Martin. 2007. « Factors affecting hip range of motion in surface replacement arthroplasty ». Clinical Biomechanics, vol. 22, nº 9. pp. 1004-1012.
Compte des citations dans Scopus : 28.

Paquet, Marc

Chaabane, Amine, Benkaddour, M.A., Ramudhin, Amar et Paquet, Marc. 2007. « Incorporating safety stock considerations in supply chain design ». Communication lors de la conférence : Optimisation Days = Les Journées de l'Optimisation (Montreal, QC, Canada, May 8, 2007).

Hourmilougué, G., Ramudhin, Amar et Paquet, Marc. 2007. « Due date assignment in a disassembly/assembly system ». In 7e Congrès International de Génie Industriel (Trois-Rivières, QC, Canada, 5-8 juin 2007)

Petit, Yvan

Jaafar, E., Petit, Yvan, Mark, L., Clément, J., Lussier, B. et Hagemeister, Nicola. 2007. « Étude cinématique de la phase d'appui au trot chez le chien : conception d'un montage expérimental ». Affiche présentée lors de la conférence : VIIe Journée de la Recherche de l’Hôpital du Sacré-Coeur de Montréal (Montréal, QC, Canada, 22 juin 2007).

Kiss, M-O, Hagemeister, N., Levasseur, A., Fernandes, J., Lussier, B. et Petit, Y.. 2007. « Utilisation d'une pince à refroidissement thermiélectrique lors d'essais in vitro de traction cyclique et de tests à bris ». Communication lors de la conférence : 27e Journée de la Recherche du POES et de la Division d'Orthopédique de l'Université de Montréal (Montréal, QC, Canada, 20 avril 2007).

Ramudhin, Amar

Chaabane, Amine, Benkaddour, M.A., Ramudhin, Amar et Paquet, Marc. 2007. « Incorporating safety stock considerations in supply chain design ». Communication lors de la conférence : Optimisation Days = Les Journées de l'Optimisation (Montreal, QC, Canada, May 8, 2007).

Hourmilougué, G., Ramudhin, Amar et Paquet, Marc. 2007. « Due date assignment in a disassembly/assembly system ». In 7e Congrès International de Génie Industriel (Trois-Rivières, QC, Canada, 5-8 juin 2007)

Ramudhin, Amar, Chan, Eric et Mokadem, Abdelkader. 2007. « A framework for the modelling, analysis and optimization of pathways in healthcare ». In International Conference on Service Systems and Service Management (SSSM) (Troyes, France, Oct. 25-27, 2006) pp. 698-702. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 7.

Tchikou, Mahmoud, Gouarderes, Eric, Ramudhin, Amar, Artiba, Abdelhakim et Lamarque, Nicholas. 2007. « Agent-based approach for manufacturing dynamic scheduling ». In International Conference on Service Systems and Service Management (SSSM) (Troyes, France, Oct. 25-27, 2006) pp. 834-840. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Rivest, Louis

Brière-Côté, A., Rivest, Louis et Desrochers, A.. 2007. « Évolution de la structure d'un produit sur son cycle de vie dans un environnement hétérogène d'adaptation de produit à la demande ». Communication lors de la conférence : 75e Congrés de l'ACFAS (Trois-Rivières, QC, Canada, 7-11 mai 2007).

Lamarche, Bruno et Rivest, Louis. 2007. « Achieving a dynamic product model with inter-features associations ». In 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montreal, Canada, June 11-13, 2007) Montréal, Qué., Canada : École de technologie supérieure.

Lamarche, Bruno et Rivest, Louis. 2007. « Dynamic product modeling with inter-features associations: comparing customization and automation ». In International Computer Aided Design Conference and Exhibition (CAD) (Honolulu, HI, USA, June 25-29, 2007) pp. 877-886.
Compte des citations dans Scopus : 9.

Lamarche, Bruno et Rivest, Louis. 2007. « Dynamic product modeling with inter-features associations: Comparing customization and automation ». Computer-Aided Design and Applications, vol. 4, nº 6. pp. 877-886.
Compte des citations dans Scopus : 9.

Maranzana, Roland, Msaaf, Omar et Rivest, Louis. 2007. « Interprétation des modèles géométriques 3D : application à la recherche de pièces et à la comparaison de leurs représentations géométriques ». Communication lors de la conférence : 75e Congrès de l'Association Francophone pour le Savoir (ACFAS) (Trois-Rivières, QC, Canada, 7-11 mai 2007).

Msaaf, Omar, Maranzana, Roland et Rivest, Louis. 2007. « Part data mining for information re-use in a PLM context ». In ASME Turbo Expo 2007: Power for Land, Sea, and Air (Montreal, QC, Canada, May 14-17, 2007) pp. 187-194. New York, NY, USA : American Society of Mechanical Engineers.
Compte des citations dans Scopus : 9.

Sabourin, Robert

Coetzer, Hanno et Sabourin, Robert. 2007. « A human-centric off-line signature verification system ». In 9th International Conference on Document Analysis and Recognition (ICDAR) (Curitiba, Brazil, Sept. 23-26, 2007) pp. 153-157. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 10.

Côté, Pascal, Parrott, Lael et Sabourin, Robert. 2007. « Multi-objective optimization of an ecological assembly model ». Ecological Informatics, vol. 2, nº 1. pp. 23-31.
Compte des citations dans Scopus : 4.

dos Santos, Eulanda M., Sabourin, Robert et Maupin, Patrick. 2007. « Ambiguity-guided dynamic selection of ensemble of classifiers ». In 10th International Conference on Information Fusion (Quebec, Canada, Jul. 9-12, 2007) Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Compte des citations dans Scopus : 16.

Freitas, C. O. A., Carvalho, J. M., Oliveira, J. J. Jnr, Aires, S. B. K. et Sabourin, Robert. 2007. « Distance-based disagreement classifiers combination ». In International Joint Conference on Neural Networks (IJCNN) (Orlando, FL, USA, Aug. 12-17, 2007) pp. 2729-2733. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 1.

Freitas, Cinthia O. A., De Carvalho, Joao M., Oliveira Jr, Jose Josemar, Aires, Simone B. K. et Sabourin, Robert. 2007. « Confusion matrix disagreement for multiple classifiers ». In Progress in Pattern Recognition, Image Analysis and Applications :12th Iberoamericann Congress on Pattern Recognition, CIARP 2007, Valparaiso, Chile, November 13-16, 2007. Proceedings (Vina del Mar-Valparaiso, Chile, Nov.13-16, 2007) Coll. « Lecture Notes in Computer Science », vol. 4756. pp. 387-396. Heidelberg, Germany : Springer Verlag.
Compte des citations dans Scopus : 16.

Granger, Éric, Henniges, Philippe, Sabourin, Robert et Oliveira, Luiz S.. 2007. « Supervised learning of fuzzy ARTMAP neural networks through particle swarm optimization ». Journal of Pattern Recognition Research, vol. 2, nº 1. pp. 27-60.

Kapp, Marcelo N., Freitas, Cinthia O. de A. et Sabourin, Robert. 2007. « Methodology for the design of NN-based month-word recognizers written on Brazilian bank checks ». Image and Vision Computing, vol. 25, nº 1. pp. 40-49.
Compte des citations dans Scopus : 20.

Kapp, Marcelo N., Sabourin, Robert et Maupin, Patrick. 2007. « An empirical study on diversity measures and margin theory for ensembles of classifiers ». In 10th International Conference on Information Fusion (Quebec, Canada, Jul. 9-12, 2007) Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 28.

Ko, Albert Hung Ren, Sabourin, Robert et de Souza Britto, Alceu. 2007. « Applying pairwise fusion matrix on fusion functions for classifier combination ». In Multiple Classifier Systems 7th International Workshop, MCS 2007, Prague, Czech Republic, May 23-25, 2007. Proceedings (Prague, Czech Republic, May 23-25, 2007) Coll. « Lecture Notes in Computer Science », vol. 4472. pp. 302-311. Heidelberg, Gremany : Springer.

Ko, Albert Hung-Ren , Sabourin, Robert, Britto Jr, A. et Oliveira, L.. 2007. « Pairwise fusion matrix for combining classifiers ». Pattern Recognition, vol. 40, nº 8. pp. 2198-2210.
Compte des citations dans Scopus : 49.

Ko, Albert Hung-Ren, Sabourin, Robert et de Souza Britto, Alceu. 2007. « A new HMM-based ensemble generation method for numeral recognition ». In Multiple Classifier Systems 7th International Workshop, MCS 2007, Prague, Czech Republic, May 23-25, 2007. Proceedings (Prague, Czech Republic, May 23-25, 2007) Coll. « Lecture Notes in Computer Science », vol. 4472. pp. 52-61. Heidelberg, Gremany : Springer.
Compte des citations dans Scopus : 7.

Ko, Albert Hung-Ren, Sabourin, Robert et de Souza Britto, Alceu. 2007. « A new dynamic ensemble selection method for numeral recognition ». In Multiple Classifier Systems 7th International Workshop, MCS 2007, Prague, Czech Republic, May 23-25, 2007. Proceedings (Prague, Czech Republic, May 23-25, 2007) Coll. « Lecture Notes in Computer Science », vol. 4472. pp. 431-439. Heidelberg, Germany : Springer.
Compte des citations dans Scopus : 6.

Ko, Albert Hung-Ren, Sabourin, Robert et de Souza Britto, Alceu. 2007. « K-nearest oracle for dynamic ensemble selection ». In 9th International Conference on Document Analysis and Recognition (ICDAR) (Curitiba, Brazil, Sept. 23-26, 2007) pp. 422-426. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 7.

Oliveira, Luiz S., Justino, Edson et Sabourin, Robert. 2007. « Off-line signature verification using writer-independent approach ». In International Joint Conference on Neural Networks (IJCNN) (Orlando, FL, USA, Aug. 12-17, 2007) pp. 2538-2543. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 29.

Radtke, P.V., Sabourin, Robert et Wong, Tony. 2007. « Annealing based approach to optimize classification system ». In International Joint Conference on Neural Networks (IJCNN) (Orlando, FL, USA, Aug. 12-17, 2007) pp. 2616-2620. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Radtke, Paulo V. W., Sabourin, Robert et Wong, Tony. 2007. « A quantitative comparison between MOGAs and the RRT algorithm on classification systems optimization ». In Brazilian Meeting on Artificial Intelligence (ENIA : Encontro Nacional de Inteligência Artificial) (Rio de Janeiro, Brazil, July 3-6, 2007) pp. 1460-1468.

Wong, Tony

Barrette, Mathieu, De Kelper, Bruno et Wong, Tony. 2007. « Statistical comparison of evolutionary algorithms ». In Smart systems engineering : computational intelligence in architecting complex engineering systems : proceedings of the Artificial Neural Networks in Engineering (ANNIE ...) Conference (St-Louis, MO, USA, Nov. 11-14, 2007) Coll. « ASME Press Series on Intelligent Engineering Systems Through Artificial Neural Networks », vol. 17. pp. 237-245. ASME Press.

Barrette, Mathieu, Wong, Tony et De Kelper, Bruno. 2007. « Evolutionary algorithms performance evaluation using rank-based multiple comparison procedure ». In WMSCI 2007 - The 11th World Multi-Conference on Systemics, Cybernetics and Informatics, Jointly with the 13th International Conference on Information Systems Analysis and Synthesis, ISAS 2007 - Proc. (Orlando, FL, USA, July 8-11, 2007) pp. 35-40. Paris, France : International Social Science Council.

Ma, Irwin, Wong, Tony et Sankar, Thiagas. 2007. « An engineering approach to forecast volatility of financial indices ». International Journal of Computational Intelligence, vol. 3, nº 1. pp. 23-35.

Ma, Irwin, Wong, Tony et Sankar, Thiagas. 2007. « Volatility forecasting using time series data mining and evolutionary computation techniques ». In Proceedings of the 9th annual conference on Genetic and evolutionary computation (London, UK, Jul. 7-11, 2007) p. 2262. New York, NY, USA : Association for Computing Machinery.
Compte des citations dans Scopus : 3.

Radtke, P.V., Sabourin, Robert et Wong, Tony. 2007. « Annealing based approach to optimize classification system ». In International Joint Conference on Neural Networks (IJCNN) (Orlando, FL, USA, Aug. 12-17, 2007) pp. 2616-2620. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Radtke, Paulo V. W., Sabourin, Robert et Wong, Tony. 2007. « A quantitative comparison between MOGAs and the RRT algorithm on classification systems optimization ». In Brazilian Meeting on Artificial Intelligence (ENIA : Encontro Nacional de Inteligência Artificial) (Rio de Janeiro, Brazil, July 3-6, 2007) pp. 1460-1468.

Wong, Tony et Cormier, Gilles. 2007. « Bond graph causality assignment and evolutionary multi-objective optimization ». In Advances and Innovations in Systems, Computing Sciences and Software Engineering, Dec. 4-14, 2006) pp. 433-438. Springer Netherlands.
Compte des citations dans Scopus : 2.

de Guise, Jacques A.

Campana, S., de Guise, Jacques A., Rillardon, L., Mitton, D. et Skalli, W.. 2007. « Lumbar intervertebral disc mobility : effect of disc degradation and of geometry ». European Journal of Orthopaedic Surgery & Traumatology, vol. 17, nº 6. pp. 533-541.
Compte des citations dans Scopus : 10.

Chailleux, Nadège, Lussier, Bertrand, de Guise, Jacques A., Chevalier, Yan et Hagemeister, Nicola. 2007. « In vitro 3-dimensional kinematic evaluation of 2 corrective operations for cranial cruciate ligament-deficient stifle ». Canadian Journal of Veterinary Research , vol. 71, nº 3. pp. 175-180.
Compte des citations dans Scopus : 40.

Cresson, T., Godbout, B., Branchaud, D., Aubert, B., Deschênes, S., Khoury, V., Parent, S., Labelle, H., Skalli, W., Mitton, D. et de Guise, Jacques A.. 2007. « Le système de radiographie biplan à faible irradiation EOS ». Communication lors de la conférence : 27e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, Avril 2007).

de Guise, Jacques A., Yahia, L'Hocine, Duval, Nicolas, Godbout, Benoît, Koller, Annick, Sati, Marwan, Hagemeister, Nicola, Parent, Gerald et El Maach, Ismail (inventeurs) 6 novembre 2007. « A system for the analysis of 3D kinematic of the knee ». Socovar, Polyvalor, Val-Chum Limted Partnership, Hagemeister, Nicola (titulaire(s)). Brevet américain US 7,291,119.

Fuentes, A., Hagemeister, Nicola, Ranger, P., Heron, T. et de Guise, Jacques A.. 2007. « Augmentation du moment adducteur suite à une rupture du ligament croisé antérieur ». Affiche numéro 59 présentée lors de la conférence : 10e Congrès Annuel des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montréal, Canada, 18 déc. 2007).

Fuentes, A., Hagemeister, Nicola, Südhoff, I., Fernandes, J., Ranger, P. et de Guise, Jacques A.. 2007. « New 3D biomedical and imaging technologies to evaluate the effect of anterior cruciate ligament reconstruction : preliminary results ». [Résumé d'une communication à une conférence]. Clinical Journal of Sports Medicine, vol. 17, nº 2. p. 165.

Fuentes, A., Hagemeister, Nicola, Südhoff, I., Requiao, L., Fernandes, J., Ranger, P. et de Guise, Jacques A.. 2007. « Effets d'une rupture du ligament croisé antérieur sur la biomécanique 3D du genou: résultats préliminaires ». Affiche numéro 50 présentée lors de la conférence : 27e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, Avril 2007).

Fuentes, Alexandre, Hagemeister, Nicola, Ranger, Pierre, Heron, Timothy et de Guise, Jacques A.. 2007. « ACL rupture increases knee adduction moment during gait ». In 6th Combined Meeting of the Orthopedic Research Societies (Honolulu, HI, USA, Oct. 21-24, 2007) p. 36.

Gargouri, I. et de Guise, Jacques A.. 2007. « Automated method for clinic and morphologic analysis of bones using implicit modeling technique ». In 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBS) (Lyon, France, Aug. 22-26, 2007) pp. 5095-5098. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Compte des citations dans Scopus : 4.

Glavas, P., Mac-Thiong, J.M., Parent, S., de Guise, Jacques A. et Labelle, H.. 2007. « Quel paramètre est à utiliser dans la esure de la cyphose lombo-sacrée dans le spondylolisthésis ». Affiche numéro 62 présentée lors de la conférence : 27e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, Avril 2007).

Humbert, L., de Guise, J. A., Godbout, B., Parent, S., Mitton, D. et Skalli, W.. 2007. « 3D reconstruction of the spine from biplanar x-rays using longitudinal and transversal inferences ». [Résumé d'une communication à une conférence]. Journal of Biomechanics, vol. 40, nº Supp. 2. S160.

Imbriglio, TV., Fuentes, A. et de Guise, Jacques A.. 2007. « Impact d'une rupture du LCA sur la cinétique et les paramètres spatiotemporels lors de la marche ». Affiche numéro 69 présentée lors de la conférence : 10e Congrès Annuel des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montréal, Canada, 18 déc. 2007).

Labbé, D., Hagemeister, Nicola, Fernades, J. et de Guise, Jacques A.. 2007. « Développement et validation d'un outil de mesure du phénomène de Pivot Shift dans le genou : résultats préliminaires ». Affiche numéro 76 présentée lors de la conférence : 10e Congrès Annuel des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montréal, Canada, 18 déc. 2007).

Lau, C., Lessard, S., Soulez, G. et de Guise, Jacques A.. 2007. « Suivi du guide sur images fluoroscopiques d'interventions neuroradiologiques ». Affiche numéro 82 présentée lors de la conférence : 10e Congrès Annuel des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montréal, Canada, 18 déc. 2007).

Levasseur, Annie, Tetreault, Patrice, de Guise, Jacques A., Nuño, Natalia et Hagemeister, Nicola. 2007. « The effect of axis alignment on shoulder joint kinematics analysis during arm abduction ». Clinical Biomechanics, vol. 22, nº 7. pp. 758-766.
Compte des citations dans Scopus : 15.

Mac-Thiong, Jean-Marc, Pinel-Giroux, Fanny-Maud, de Guise, Jacques A. et Labelle, Hubert. 2007. « Comparison between constrained and non-constrained cobb techniques for the assessment of thoracic kyphosis and lumbar lordosis ». European Spine Journal, vol. 16, nº 9. pp. 1325-1331.
Compte des citations dans Scopus : 28.

Marchane, I., de Guise, Jacques A., Cloutier, G. et Lerouge, Sophie. 2007. « Segmentation de coupes histologiques pour l'analyse histomorphométrique de plaques d'athérosclérose ». Affiche numéro 9 présentée lors de la conférence : 10e Congrès Annuel des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montréal, Canada, 18 déc. 2007).

Meghoufel, A., de Guise, J. A., Crevier-Denoix, N. et Cloutier, G.. 2007. « B-Scan images simulation of the equine superficial digital flexor tendon ». [Résumé d'une communication à une conférence]. Journal of the society for simulation in healthcare, vol. 2, nº 2. p. 153.

Mezghani, N., Aissaoui, Rachid, Boivin, K., de Guise, Jacques A., Hagemeister, Nicola et Turcot, K.. 2007. « Analyse et classification automatique de données cinétiques provenant de sujets asymptomatiques et arthrosiques ». Affiche numéro 103 présentée lors de la conférence : 62nd Canadian Orthopaedic Association Annual Meeting : Joints & Arthritis (Halifax, NS, Canada, 1-3 juin 2007).

Mezghani, N., Boivin, K., Turcot, K., Aissaoui, Rachid, Hagemeister, Nicola et de Guise, Jacques A.. 2007. « Analyse et classification automatique de données cinétiques provenant de sujets asymptomatiques et gonarthrosiques ». Affiche numéro 60 présentée lors de la conférence : 27e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montreal, QC, Canada, Avril 2007).

Phan Nhut Tran, P., Labelle, H., de Guise, Jacques A. et Aubin, CÉ. 2007. « Élaboration d'outils basés sur des méthodes d'intelligence artificielle pour optimiser les stratégies opératoires d'instrumentation du rachis scoliotique ». Affiche numéro 44 présentée lors de la conférence : 27e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, Avril 2007).

Südhoff, I., de Guise, Jacques A., Fuentes, A. et Skalli, W.. 2007. « Combining stereoradiography and gait analysis to determine the centre of the femoral head : impact on kinetics ». Communication lors de la conférence : 16th annual meeting of ESMAC (Athens, Greece, Sept. 24-29, 2007).

Südhoff, I., Parent, G., Fuentes, A., Goujon, H., Poignard, A., Bonnet, X., de Guise, Jacques A. et Skalli, W.. 2007. « Intégration de la géométrie osseuse personnalisée à l'analyse du mouvement ». Communication lors de la conférence : 6e Journée du Groupe d'Analyse du Mouvement chez l'Enfant et l'Adulte (GAMEA) (Bruxelles, Belgique, 8-9 fév. 2007).

Südhoff, I., Skalli, W., Fuentes, A. et de Guise, J. A.. 2007. « A patient specific model for gait analysis ». [Résumé d'une communication à une conférence]. Journal of Biomechanics, vol. 40, nº S2. S346.

Südhoff, I., Skalli, W., Fuentes, A. et de Guise, Jacques A.. 2007. « A patient specific model for gait analysis ». Communication lors de la conférence : XXIth Congress of the International Society of Biomechanics (ISB) (Taipei, Taiwan, July 1-5, 2007).

Südhoff, Ingrid, Van Driessche, Stéphane, Laporte, Sébastien, de Guise, Jacques A. et Skalli, Wafa. 2007. « Comparing three attachment systems used to determine knee kinematics during gait ». Gait & Posture, vol. 25, nº 4. pp. 533-543.
Compte des citations dans Scopus : 32.

Tang, An, Cloutier, Guy, Therasse, Eric, Beaudoin, Gilles, Qanadli, Salah D., Giroux, Marie France, Boussion, Nicolas, de Guise, Jacques A., Oliva, Vincent L. et Soulez, Gilles. 2007. « Optimization of spatial resolution for peripheral magnetic resonance angiography ». Academic Radiology, vol. 14, nº 1. pp. 54-61.
Compte des citations dans Scopus : 4.

Tanguay, F., Mac-Thiong, JM., de Guise, Jacques A. et Hubert, L.. 2007. « Relation entre la géométrie pelvienne et la lordose lombaire suite à la correction chirurgicale d'une scoliose idiopathique ». Affiche numéro 56 présentée lors de la conférence : 27e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, Avril 2007).

Tanguay, Frédéric, Mac-Thiong, Jean-Marc, de Guise, Jacques A. et Labelle, Hubert. 2007. « Relation between the sagittal pelvic and lumbar spine geometries following surgical correction of adolescent idiopathic scoliosis ». European Spine Journal, vol. 16, nº 4. pp. 531-536.
Compte des citations dans Scopus : 52.

Turcot, K., Boivin, K., Aissaoui, Rachid, Hagemeister, Nicola, Pelletier, M. et de Guise, Jacques A.. 2007. « Fidélité et changement clinique minimal des accélérations 3D lors d'une évaluation locomotrice de patients gonarthrosiques ». Affiche numéro 52 présentée lors de la conférence : 27e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, Avril 2007).

Cette liste a été générée le Fri Mar 29 01:46:07 2024 EDT.