ENGLISH
La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS
RECHERCHER

L'affiliation est "Génie mécanique"

Exporter en format [Atom feed] Atom [RSS feed] RSS 1.0 [RSS2 feed] RSS 2.0
Groupement par Professeur | Année | Type de document | Sans groupement
Nombre de documents archivés : 157.

Arteau, Jean

Arteau, Jean. 2005. « Protection contre les chutes de hauteur : de nouveaux absorbeurs d'énergie pour les personnes de fortes tailles CAN/CSA-Z259.11-05 ». In Colloque la santé et la sécurité du travail au Québec : de la recherche à la pratique : 11 mai 2005 à l'Université du Québec à Chicoutimi dans le cadre du 73e congrès de l'Acfas (Chicoutimi, QC, Canada, 10-15 mai 2005) Chicoutimi, QC, Canada : Réseau de recherche en santé et en sécurité du travail du Québec.

Arteau, Jean et Lan, André. 2005. « Une nouvelle norme pour la conception des systèmes actifs de protection contre les chutes de hauteur CAN/CSA-Z259.16-04 ». In Colloque la santé et la sécurité du travail au Québec : de la recherche à la pratique : 11 mai 2005 à l'Université du Québec à Chicoutimi dans le cadre du 73e congrès de l'Acfas (Chicoutimi, QC, Canada, 10-15 mai 2005) Chicoutimi, QC, Canada : Réseau de recherche en santé et en sécurité du travail du Québec.

Arteau, Jean, Nadeau, Sylvie, Ngô, Anh Dung et Rivet, Pierre. 2005. « La santé et la sécurité du travail en milieu universitaire: des choix proactifs ». In Colloque la santé et la sécurité du travail au Québec : de la recherche à la pratique : 11 mai 2005 à l'Université du Québec à Chicoutimi dans le cadre du 73e congrès de l'Acfas (Chicoutimi, QC, Canada, 10-15 mai 2005) Chicoutimi, QC, Canada : Réseau de recherche en santé et en sécurité du travail du Québec.

Lan, André, Arteau, Jean et Daigle, Renaud. 2005. « Développement et validation d'une méthode d'évaluation des garde-corps fabriqués et installés à pied d'oeuvre sur les chantiers ». Coll. « Études et Recherches », vol. R-415. Montréal : IRSST. 170 p.

Bocher, Philippe

Bocher, P., Jahazi, M., Germain, L., Gey, N. et Humbert, M.. 2005. « Variant selection in forged titanium alloys : effect of microscopic grain misorientations on the formation of macroscopic regions with similar crystallographic orientations ». In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005) pp. 523-530. Montréal, Qué., Canada : École de technologie supérieure.

Bocher, Philippe, Jahazi, Mohammad, Germain, Lionel, Wanjara, Priti, Gey, Nathalie et Humbert, Michel. 2005. « β Microtexture analysis in correlation with hcp textured regions observed in a forged near alpha titanium alloy ». Solid State Phenomena, vol. 105. pp. 127-132.
Compte des citations dans Scopus : 5.

Boutana, N., Bocher, P., Jahazi, M., Savoie, J., Piot, D. et Montheillet, F.. 2005. « Modelling mechanical behaviour of heterogeneous materials using cellular automata : application to some forged titanium alloys ». In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005) pp. 273-280. Montréal, Qué., Canada : École de technologie supérieure.

Germain, L., Gey, N., Humbert, M., Bocher, P. et Jahazi, M.. 2005. « β→-αs variant selection in sharp hcp textured regions of a bimodal IMI834 billet ». In Proceedings of the 14th International Conference on Textures of Materials (Leuven, Belgium, July 11-15, 2005) Coll. « Materials Science Forum », vol. 495-497. pp. 663-668. Trans Tech Publications.
Compte des citations dans Scopus : 11.

Germain, L., Gey, N., Humbert, M., Hazotte, A., Bocher, P. et Jahazi, M.. 2005. « An automated method to analyze separately the microtextures of primary αp grains and the secondary αs inherited colonies in bimodal titanium alloys ». Materials Characterization, vol. 54, nº 3. pp. 216-222.
Compte des citations dans Scopus : 32.

Germain, Lionel, Gey, Nathalie, Humbert, Ludovic, Bocher, Philippe et Jahazi, Mohammad. 2005. « Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet ». Acta Materialia, vol. 53, nº 13. pp. 3535-3543.
Compte des citations dans Scopus : 167.

Khodabandeh, Ali Reza, Jahazi, Mohammad, Yue, Steve et Bocher, Philippe. 2005. « Impact toughness and tensile properties improvement through microstructure control in hot forged Nb-V microalloyed steel ». ISIJ International, vol. 45, nº 2. pp. 272-280.
Compte des citations dans Scopus : 23.

Wanjara, P., Monajati, H., Jahazi, M., Germain, L., Bocher, P. et Immarigeon, J.-P.. 2005. « Deformation processing mechanism and microstructural evolution in a near-alpha titanium alloy ». In Materials science & technology: proceedings of the conference held September 25-28, 2005, Pittsburgh, Pennsylvania USA (Pittsburgh, PA, USA, Sept. 25-28, 2005) pp. 15-26. Association for Iron and Steel Technology.

Bouzid, Hakim

Bouzid, A. et Morandin, G. D., éds. 2005. « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.

Bouzid, Hakim. 2005. « Bolted flange joints with full face gaskets : an analytical approach based on flexibility ». In ASME Pressure Vessels and Piping Conference (PVP) (Denver, CO, USA, Jul. 17-21, 2005) pp. 29-35. New York, NY, USA : American Society of Mechanical Engineers.
Compte des citations dans Scopus : 1.

Bouzid, Hakim. 2005. « Bolted flanged joint flexibility analysis ». Communication lors de la conférence : PVRC Conference on Best Practices for Flange Assembly and Maintenance (PVRC-WRC) (New Orleans, LA, USA, May 23-25, 2005).

Bouzid, Hakim et Nechache, A.. 2005. « An analytical solution for evaluating gasket stress change in bolted flange connections subjected to high temperature loading ». Journal of Pressure Vessel Technology, vol. 127, nº 4. pp. 414-421.
Compte des citations dans Scopus : 37.

Bouzid, Hakim et Nechache, A.. 2005. « Thermally induced deflections in bolted flanged connections ». Journal of Pressure Vessel Technology, vol. 127, nº 4. pp. 394-401.
Compte des citations dans Scopus : 13.

Champliaud, Henri et Bouzid, Abdel-Hakim. 2005. « Computation of unloading stiffness of nonlinear gaskets using dual kriging interpolation ». In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, Canada, Aug. 1-4, 2005) pp. 127-138. Montréal, Qué., Canada : École de technologie supérieure.

Diany, M., Bouzid, Hakim et Derenne, M.. 2005. « On the validity and limits of the gasket effective width concept ». In ASME Pressure Vessels and Piping Conference (PVP) (Denver, CO, USA, Jul. 17-21, 2005) pp. 15-20. New York, NY, USA : American Society of Mechanical Engineers.

Marchand, Luc, Derenne, Michel, Sakr, Olivier et Bouzid, Hakim. 2005. « Long term pressurized graphite gasketed joint tests ». Welding Research Council Bulletin, nº 507. pp. 1-14.
Compte des citations dans Scopus : 2.

Nechache, A. et Bouzid, Hakim. 2005. « Creep effect of attached structures on bolted flanged joint relaxation ». In ASME Pressure Vessels and Piping Conference (PVP) (Denver, CO, USA, Jul. 17-21, 2005) pp. 207-215. New York, NY, USA : American Society of Mechanical Engineers.
Compte des citations dans Scopus : 3.

Brailovski, Vladimir

Baril, Y., Brailovski, Vladimir, Cartier, R. et Terriault, Patrick. 2005. « Feasibility study of a new sternal closure device using tubular braided superelastic nitinol structure ». In Materials and Processes for Medical Devices Conference & Exposition (Boston, MA, USA, Nov. 14-16, 2005) pp. 243-248. Kinsman Road, OH, USA : ASM International.

Gauthier, François-Simon, Vachon, Pierre-Luc, Brailovski, Vladimir et Terriault, Patrick. 2005. « Development of a numerical model for the optimization of damage controlling carbon/epoxy composites containing SMA wires ». In International Workshop on Smart Materials and Structures (Cansmart) (Toronto, ON, Canada, Oct. 12-13, 2006) pp. 261-270. Kingston, Canada : CanSmart Group.

Inaekyan, K. E., Prokoshkin, S. D., Brailovski, V., Khmelevskaya, I. Yu., Demers, V., Dobatkin, S. V., Tatyanin, E. V. et Bastarache, E.. 2005. « Substructure and nanocrystalline structure effects in thermomechanically treated Ti-Ni alloys ». In Nanomaterials by Severe Plastic Deformation (Fukuoka, Japan, Sept. 22-26, 2005) Coll. « Materials Science Forum », vol. 503-504. pp. 597-602. Stafa-Zuerich, Switzerland : Trans Tech Publications Ltd.

Prokoshkin, S., Brailovski, Vladimir, Khmelevskaya, I., Dobatkin, S., Inaekyan, K., Turilina, V., Demers, V. et Tat'yanin, E.. 2005. « Creation of substructure and nanostructure in thermomechanical treatment and control on functional properties of Ti-Ni alloys with shape memory effect ». Metal Science and Heat Treatment, vol. 47, nº 5-6. pp. 182-187.
Compte des citations dans Scopus : 22.

Champliaud, Henri

Champliaud, Henri et Bouzid, Abdel-Hakim. 2005. « Computation of unloading stiffness of nonlinear gaskets using dual kriging interpolation ». In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, Canada, Aug. 1-4, 2005) pp. 127-138. Montréal, Qué., Canada : École de technologie supérieure.

Champliaud, Henri, Lajmi, Abdelmajid et Lê, Ngan Van. 2005. « Finite element analysis of a three-point belt tension tester ». In Non-Conference Specific Technical Papers (Troy, MI, USA, Sept. 1, 2005) Coll. « SAE Technical Papers », vol. 2005-01-3137. SAE.

Potvin, Marie-Josée, Sylvestre, Bruno et Champliaud, Henri. 2005. « Development of a small deployable membrane antenna ». In Canadian Aeronautics and Space Institute Conference (Toronto, ON, Canada, Apr. 26-27, 2005)

Terrier, P., Seers, P. et Champliaud, H.. 2005. « Comparison of emissions and fuel consumption between gasoline and E85 in a simulated hybrid electric vehicle ». In Powertrain & Fluid Systems Conference and Exhibition (San Antonio, TX, USA, Oct. 24-27, 2005) Coll. « SAE Technical Papers », vol. 2005-01-3829. SAE International.
Compte des citations dans Scopus : 2.

Thomas, Marc et Champliaud, Henri. 2005. « Effect of residual stresses on modal parameters of welded structures ». In 23rd Seminar on Machinery Vibration (Edmonton, AB, Canada, Oct. 26-28, 2005) Calgary, Canada : CMVA.

Chatelain, Jean-François

Chatelain, Jean-François. 2005. « A level-based optimization algorithm for complex part localization ». Precision Engineering, vol. 29, nº 2. 197–207.
Compte des citations dans Scopus : 34.

Dao, Thien-My

Zhao, Jian Hua, Liu, Zhaoheng et Dao, My-Thien. 2005. « Solving reliability optimal design problem using ant colony system (ACS) approaches ». In Proceedings of the 15th International CIRP Design Seminar (Shanghai, China, May 22-25, 2005) pp. 32-40.

Zhao, Jian-Hua, Dao, Thien-My et Liu, Zhaoheng. 2005. « Optimization of mechanical systems reliability using ant colony based simulation approach ». In Proceedings of the IASTED International Conference on Modelling and Simulation (Cancun, Mexico, May 18-20, 2005) pp. 182-187. Calgary, Canada : ACTA Press.
Compte des citations dans Scopus : 1.

David, Éric

Crine, J.P. et David, Éric. 2005. « Influence of mechanical stresses on some electrical properties of polymers ». In Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Nashville, TN, USA, Oct. 16-19, 2005) pp. 71-74. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 6.

Crine, J.P. et David, Éric. 2005. « Mechanical stresses and some electrical properties of polymers ». Communication lors de la conférence : Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Nashville, TN, USA, Oct. 16-19, 2005 ).

David, Éric, Dabbagui, A., Dubreuil, I. et Masounave, Jacques. 2005. « Time and frequency domain dielectric measurements used as nondestructive evaluation technique for the characterization of micro-size particle reinforced polymeric matrix composites ». Communication lors de la conférence : 7th International Conference on Mesomechanics (MESO) (Montreal, QC, Canada, Aug. 1-4, 2005).

David, Éric, Dabbagui, Abderrezzak, Dubreuil, Isabelle et Masounave, Jacques. 2005. « Electrical measurements used as nondestructive evaluation technique for the characterization of micro-size particle reinforced polymeric matrix composites ». In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montréal, Canada, Aug. 1-4, 2005) pp. 87-95. Montréal, Qué., Canada : École de technologie supérieure.

David, Éric et Lamarre, L.. 2005. « Modeling of the low-frequency dielectric response of rotating machine stator insulation system ». In Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Nashville, TN, USA, Oct. 16-19, 2005) pp. 257-260. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 7.

David, Éric et Lamarre, L.. 2005. « Modelisation of the low-frequency dielectric response of rotating machine stator insulation system ». Communication lors de la conférence : Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Nashville, TN, USA, Oct. 16-19, 2005).

David, Éric et Lamarre, Laurent. 2005. « Influence of rise time on dielectric parameters extracted from time domain spectroscopy in the context of generator stator insulation ». IEEE Transactions on Dielectrics and Electrical Insulation, vol. 12, nº 3. pp. 423-428.
Compte des citations dans Scopus : 12.

El Majdoubi, M., Vu-Khanh, Toan et David, Éric. 2005. « Effects of physical aging on fracture and yielding behavior of polypropylene ». In 1st International Conference on Mechanics of Biomaterials & Tissue (Waikoloa, HI, USA, Dec. 11-15, 2005)

Guerra, M., Thomas, Marc et David, Éric. 2005. « Turbomachinery blade vibratory stress prediction using contact elements modeling ». In Symposium on the Evaluation, Control, and Prevention of High Cycle Fatigue in Gas Turbine Engines for Land, Sea and Air Vehicles (Seville, Spain, Oct. 3-7, 2005)

Noirhomme, B., David, Éric, Gharbi, H. et Lessard, M.C.. 2005. « Application of dielectric response techniques for the condition assessement of power transformers ». Communication lors de la conférence : Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Nashville, TN, USA, Oct. 16-19, 2005).

Noirhomme, B., David, Éric, Gharbi, H. et Lessard, M.C.. 2005. « Application of dielectric response techniques for the condition assessment of power transformers ». In Annual Report Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Nashville, TN, USA, Oct. 16-19, 2005) pp. 273-276. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 9.

Paynot, C., Lamarre, L., David, Éric et Taghizad, R.. 2005. « The use of transient current for the evaluation of the condition of rotor and stator insulation systems of large synchronous rotating machines ». In Electrical Insulation Conference and Electrical Manufacturing Expo (EIC) (Indianapolis, USA, Oct. 23-26, 2005) pp. 78-81. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Compte des citations dans Scopus : 11.

Demers, Vincent

Inaekyan, K. E., Prokoshkin, S. D., Brailovski, V., Khmelevskaya, I. Yu., Demers, V., Dobatkin, S. V., Tatyanin, E. V. et Bastarache, E.. 2005. « Substructure and nanocrystalline structure effects in thermomechanically treated Ti-Ni alloys ». In Nanomaterials by Severe Plastic Deformation (Fukuoka, Japan, Sept. 22-26, 2005) Coll. « Materials Science Forum », vol. 503-504. pp. 597-602. Stafa-Zuerich, Switzerland : Trans Tech Publications Ltd.

Prokoshkin, S., Brailovski, Vladimir, Khmelevskaya, I., Dobatkin, S., Inaekyan, K., Turilina, V., Demers, V. et Tat'yanin, E.. 2005. « Creation of substructure and nanostructure in thermomechanical treatment and control on functional properties of Ti-Ni alloys with shape memory effect ». Metal Science and Heat Treatment, vol. 47, nº 5-6. pp. 182-187.
Compte des citations dans Scopus : 22.

Doré, Sylvie

Ayari, H., Thomas, Marc et Doré, Sylvie. 2005. « Développement d'un modèle statistique de prédiction de la durée de vie du rachis lombaire, dépendant de la contrainte appliquée, de l'âge et de la densité osseuse ». Perspectives Interdisciplinaires sur le Travail et la Santé , vol. 7, nº 2. p. 14.

Ayari, H., Thomas, Marc et Doré, Sylvie. 2005. « Évaluation par un modèle d'éléments finis paramétrique des contraintes dynamiques dans le rachis lombaire, dues aux vibrations du corps entier ». Communication lors de la conférence : Séminaire Santé et Sécurité au Travail (SST) (Montréal, QC, Canada, Nov. 2005).

Langevin, L., Doré, Sylvie et Oliva, D.. 2005. « Les professeurs de la relève : une étude de l'impact de quelques formations ». Communication lors de la conférence : 77e Congrès de l'ACFAS (Chicoutimi, QC, Canada, 10 mai 2005).

Lavoie, F., Laplante, M., Parent, G., Duval, N., Doré, Sylvie et de Guise, Jacques A.. 2005. « Gesture and posture as important factors in 3D kinematic assessment of the knee ». Communication lors de la conférence : 31st Meeting of the Canadian Orthopaedic Residents Association (Montreal, QC, Canada, June 2-5, 2005).

Lavoie, F., Laplante, M., Parent, G., Duval, N., Doré, Sylvie et de Guise, Jacques A.. 2005. « Gesture and posture as important factors in 3D kinematic assessment of the knee ». Communication lors de la conférence : Research Day of the Programme d'Orthopédie Édouard-Samson (Montreal, QC, Canada, May 6, 2005).

Lavoie, F., Laplante, M., Parent, G., Duval, N., Doré, Sylvie et de Guise, Jacques A.. 2005. « Gesture standardization increases the reproducibility of 3D kinematic measurements of the knee joint ». Communication lors de la conférence : 60th Canadian Orthopaedic Association Annual Meeting (Montreal, QC, Canada, June 3-5, 2005).

Dufresne, Louis

Dufresne, Louis, Christophe, Julien, Gourgue, Olivier et Winckelmans, Gregoire. 2005. « Merging of unequal strength co-rotating vortices ». In 58th Annual Meeting of the Division of Fluid Dynamics (Chicago, IL, USA, Nov. 20-22, 2005) American Physical Society.

Winckelmans, Gregoire, Dufresne, Louis et Bricteux, Laurent. 2005. « LES investigation of aircraft wake two-vortex system in low level atmospheric turbulence ». In 58th Annual Meeting of the Division of Fluid Dynamics (Chicago, IL, USA, Nov. 20-22, 2005) American Physical Society.

Gharbi, Ali

Boulet, J.-F., Gharbi, Ali et Kenné, Jean-Pierre. 2005. « Production and corrective maintenance rate policy improvement in an unreliable failure prone manufacturing systems ». In 35th International Conference on Computer and Industrial Engineering (Istanbul, Turkey, June 19-22, 2005) pp. 321-326.

Dehayem Nodem, F. I., Kenné, Jean-Pierre et Gharbi, Ali. 2005. « Capacity expansion production and maintenance planning in stochastic manufacturing systems ». In International Conference on Numerical Analysis and Applied Mathematics (ICNAAM) (Rhodes, Greece, Sept. 16-20, 2005) pp. 423-427. Weinheim, Germany : Wiley-VCH Verlag.

Gharbi, Ali et Kenné, Jean Pierre. 2005. « Maintenance scheduling and production control of multiple-machine manufacturing systems ». Computers & Industrial Engineering, vol. 48, nº 4. pp. 693-707.
Compte des citations dans Scopus : 84.

Gharbi, Ali, Kenné, Jean-Pierre et Boulet, J.-F.. 2005. « Amélioration des taux de production et de maintenance corrective d'un système de production ». In 6ième Congrès International de Génie Industriel (Besançon, France, 7-10 juin 2005)

Guilbault, Raynald

Guilbault, Raynald. 2005. « Modes vibratoires des roues d'engrenage cylindriques : un outil de conception adapté ». Communication lors de la conférence : Conférence de l'Association Canadienne en Vibration des Machines (ACVM) (Montréal, QC, Canada, Oct. 2005).

Guilbault, Raynald et Cloutier, L.. 2005. « Numerical investigation of the influence of rim and web thickness on vibration modes of thin-rimmed cylindrical gears ». Communication lors de la conférence : International Conference on Gears (Munich, Germany, Sept. 14-16, 2005).

Guilbault, Raynald et Cloutier, L.. 2005. « Numerical investigation of the influence of rim and web thickness on vibration modes of thin-rimmed cylindrical gears ». In International Conference on Gears (Munich, Germany, Sept. 14-16, 2005) pp. 651-669. Germany : VDI Verlag GMBH.

Guilbault, Raynald, Gosselin, Claude et Cloutier, Louis . 2005. « Express model for load sharing and stress analysis in helical gear ». Journal of Mechanical Design, vol. 127, nº 6. pp. 1161-1172.
Compte des citations dans Scopus : 38.

Hallé, Stéphane

Amezzane, I., Sawan, M., Bellemare, F. et Hallé, Stéphane. 2005. « A CFD qualitative study of an infant's plethysmograph ». In The 28th Conference of the Canadian Medical and Biological Engineering Society, CMBEC 28 (Montreal, QC, Canada, Sept. 9-11, 2005) Ottawa, ON, Canada : The Canadian Medical and Biological Engineering Society.

Bernier, Michel et Hallé, Stéphane. 2005. « A critical look at the air infiltration term in the canadian energy rating procedure for windows ». Energy and Buildings, vol. 37, nº 10. pp. 997-1006.
Compte des citations dans Scopus : 8.

Hallé, Stéphane, Bernier, M. A. et Lartigue, B.. 2005. « Contribution to the study of multicellular flows inside two-dimensional rectangular and pinched insulated glazing cavities ». Communication lors de la conférence : ASHRAE Winter Meeting and AHR Expo (Orlando, FL, USA, Feb. 08, 2005).

Hallé, Stéphane, Bernier, Michel A. et Lartigue, Bérangère. 2005. « Contribution to the study of multicellular flows inside two-dimensional rectangular and pinched insulated glazing cavities ». HVAC&R Research, vol. 11, nº 1. pp. 77-94.

Jahazi, Mohammad

Bocher, P., Jahazi, M., Germain, L., Gey, N. et Humbert, M.. 2005. « Variant selection in forged titanium alloys : effect of microscopic grain misorientations on the formation of macroscopic regions with similar crystallographic orientations ». In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005) pp. 523-530. Montréal, Qué., Canada : École de technologie supérieure.

Bocher, Philippe, Jahazi, Mohammad, Germain, Lionel, Wanjara, Priti, Gey, Nathalie et Humbert, Michel. 2005. « β Microtexture analysis in correlation with hcp textured regions observed in a forged near alpha titanium alloy ». Solid State Phenomena, vol. 105. pp. 127-132.
Compte des citations dans Scopus : 5.

Boutana, N., Bocher, P., Jahazi, M., Savoie, J., Piot, D. et Montheillet, F.. 2005. « Modelling mechanical behaviour of heterogeneous materials using cellular automata : application to some forged titanium alloys ». In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005) pp. 273-280. Montréal, Qué., Canada : École de technologie supérieure.

Germain, L., Gey, N., Humbert, M., Bocher, P. et Jahazi, M.. 2005. « β→-αs variant selection in sharp hcp textured regions of a bimodal IMI834 billet ». In Proceedings of the 14th International Conference on Textures of Materials (Leuven, Belgium, July 11-15, 2005) Coll. « Materials Science Forum », vol. 495-497. pp. 663-668. Trans Tech Publications.
Compte des citations dans Scopus : 11.

Germain, L., Gey, N., Humbert, M., Hazotte, A., Bocher, P. et Jahazi, M.. 2005. « An automated method to analyze separately the microtextures of primary αp grains and the secondary αs inherited colonies in bimodal titanium alloys ». Materials Characterization, vol. 54, nº 3. pp. 216-222.
Compte des citations dans Scopus : 32.

Germain, Lionel, Gey, Nathalie, Humbert, Ludovic, Bocher, Philippe et Jahazi, Mohammad. 2005. « Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet ». Acta Materialia, vol. 53, nº 13. pp. 3535-3543.
Compte des citations dans Scopus : 167.

Khodabandeh, Ali Reza, Jahazi, Mohammad, Yue, Steve et Bocher, Philippe. 2005. « Impact toughness and tensile properties improvement through microstructure control in hot forged Nb-V microalloyed steel ». ISIJ International, vol. 45, nº 2. pp. 272-280.
Compte des citations dans Scopus : 23.

Wanjara, P., Monajati, H., Jahazi, M., Germain, L., Bocher, P. et Immarigeon, J.-P.. 2005. « Deformation processing mechanism and microstructural evolution in a near-alpha titanium alloy ». In Materials science & technology: proceedings of the conference held September 25-28, 2005, Pittsburgh, Pennsylvania USA (Pittsburgh, PA, USA, Sept. 25-28, 2005) pp. 15-26. Association for Iron and Steel Technology.

Kajl, Stanislaw

Nassif, N., Kajl, Stanislaw et Sabourin, Robert. 2005. « ASHRAE standard's 62 multiple spaces equation for design and control ». In Proceedings from 10th International Conference on Indoor Air Quality and Climate (Beijing, China, Sept. 4-9, 2005) International Society of Indoor Air Quality and Climate.

Nassif, N., Kajl, Stanislaw et Sabourin, Robert. 2005. « Optimal operation of VAV air-conditioning system ». In Air Conditioning, Protection & District Heating 2005 : XI International Conference, Wroclaw - Szklarska, 23-26 June 2005 (Wroclaw, Poland, June 23-26, 2005) pp. 435-440. Wroclaw : Edition PZITS.

Nassif, Nabil, Kajl, Stanislaw et Sabourin, Robert. 2005. « Optimization of HVAC control system strategy using two-objective genetic algorithm ». HVAC&R Research, vol. 11, nº 3. pp. 459-486.
Compte des citations dans Scopus : 151.

Nassif, Nabil, Kajl, Stanislaw et Sabourin, Robert. 2005. « Simplified model-based optimal control of VAV air-conditioning system ». In IBPSA 2005 - International Building Performance Simulation Association 2005 (Montreal, QC, Canada, Aug. 15-18, 2005) pp. 823-830. USA : International Building Performance Simulation Association.

Nassif, Nabil, Kajl, Stanislaw et Sabourin, Robert. 2005. « Ventilation control strategy using supply CO2 concentration setpoint ». HVAC&R Research, vol. 11, nº 2. pp. 239-262.
Compte des citations dans Scopus : 34.

Kenné, Jean-Pierre

Boulet, J.-F., Gharbi, Ali et Kenné, Jean-Pierre. 2005. « Production and corrective maintenance rate policy improvement in an unreliable failure prone manufacturing systems ». In 35th International Conference on Computer and Industrial Engineering (Istanbul, Turkey, June 19-22, 2005) pp. 321-326.

Charlot, E., Kenné, Jean-Pierre et Nadeau, Sylvie. 2005. « Optimal production and lockout/tagout control policies in manufacturing systems ». In 4th International Conference Safety of Industrial Automated Systems (SIAS) (Chicago, IL, USA, Sept. 26-28, 2005)

Dehayem Nodem, F. I., Kenné, Jean-Pierre et Gharbi, Ali. 2005. « Capacity expansion production and maintenance planning in stochastic manufacturing systems ». In International Conference on Numerical Analysis and Applied Mathematics (ICNAAM) (Rhodes, Greece, Sept. 16-20, 2005) pp. 423-427. Weinheim, Germany : Wiley-VCH Verlag.

Gharbi, Ali et Kenné, Jean Pierre. 2005. « Maintenance scheduling and production control of multiple-machine manufacturing systems ». Computers & Industrial Engineering, vol. 48, nº 4. pp. 693-707.
Compte des citations dans Scopus : 84.

Gharbi, Ali, Kenné, Jean-Pierre et Boulet, J.-F.. 2005. « Amélioration des taux de production et de maintenance corrective d'un système de production ». In 6ième Congrès International de Génie Industriel (Besançon, France, 7-10 juin 2005)

Kadissi, C., Kenné, Jean-Pierre et Saad, Maarouf. 2005. « Drive by wire control of an electro-hydraulic active suspension, a backstepping approach ». In IEEE Conference on Control Applications (CCA) (Toronto, Canada, Aug. 28-31, 2005) pp. 1581-1587. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Nkeungoué, L. J. et Kenné, J. P.. 2005. « Quality control and production planning problem of failure prone manufacturing systems ». In Proceedings of the 24th IASTED International Conference on Modeling, Identification, and Control (MIC) (Innsbruck; Austria, Feb. 16-18, 2005) pp. 571-576. Anaheim ; Calgary : ACTA Press.

Laville, Frédéric

Thomas, Marc et Laville, Frédéric. 2005. « Simulation des vibrations mécaniques par Matlab, Simulink et Ansys ». Québec : Presses de l'Université du Québec. 702 p.

Voix, Jérémie et Laville, Frédéric. 2005. « Problématiques associées au développement d'un bouchon d'oreille "intelligent" ». Perspectives Interdisciplinaires sur le Travail et la Santé, vol. 7, nº 2.

Voix, Jérémie, Laville, Frédéric et Zeidan, Jean. 2005. « In-situ personal assessment of hearing protector performance--recommendations for an updated standard ». Communication lors de la conférence : 149th Meeting of the Acoustical Society of America (Vancouver, B.C, Canada, May 16-20, 2005).

Liu, Zhaoheng

Melhem, K. et Liu, Zhaoheng. 2005. « A unified modeling and stabilization framework for interconnected rigid bodies ». In Intelligent systems at the service of mankind. pp. 141-160. Germany : Ubooks.

Melhem, Khoder, Liu, Zhaoheng et Loria, Antonio. 2005. « A unified framework for dynamics and lyapunov stability of holonomically constrained rigid bodies ». Journal of Advanced Computational Intelligence and Intelligent Informatics, vol. 9, nº 4. pp. 387-394.
Compte des citations dans Scopus : 8.

Zhao, Jian Hua, Liu, Zhaoheng et Dao, My-Thien. 2005. « Solving reliability optimal design problem using ant colony system (ACS) approaches ». In Proceedings of the 15th International CIRP Design Seminar (Shanghai, China, May 22-25, 2005) pp. 32-40.

Zhao, Jian-Hua, Dao, Thien-My et Liu, Zhaoheng. 2005. « Optimization of mechanical systems reliability using ant colony based simulation approach ». In Proceedings of the IASTED International Conference on Modelling and Simulation (Cancun, Mexico, May 18-20, 2005) pp. 182-187. Calgary, Canada : ACTA Press.
Compte des citations dans Scopus : 1.

Lê, Van Ngan

Champliaud, Henri, Lajmi, Abdelmajid et Lê, Ngan Van. 2005. « Finite element analysis of a three-point belt tension tester ». In Non-Conference Specific Technical Papers (Troy, MI, USA, Sept. 1, 2005) Coll. « SAE Technical Papers », vol. 2005-01-3137. SAE.

Lê, Van Ngan et Foisy, R.. 2005. « Finite element assisted fatigue analysis of welded steel construction according to AISC code ». In Fatigue Design Conference (Senlis, France, Nov. 16-18, 2005) Senlis, France : Centre technique des industries mécaniques (CETIM).

Masounave, Jacques

David, Éric, Dabbagui, A., Dubreuil, I. et Masounave, Jacques. 2005. « Time and frequency domain dielectric measurements used as nondestructive evaluation technique for the characterization of micro-size particle reinforced polymeric matrix composites ». Communication lors de la conférence : 7th International Conference on Mesomechanics (MESO) (Montreal, QC, Canada, Aug. 1-4, 2005).

David, Éric, Dabbagui, Abderrezzak, Dubreuil, Isabelle et Masounave, Jacques. 2005. « Electrical measurements used as nondestructive evaluation technique for the characterization of micro-size particle reinforced polymeric matrix composites ». In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montréal, Canada, Aug. 1-4, 2005) pp. 87-95. Montréal, Qué., Canada : École de technologie supérieure.

Masson, Christian

Leclerc, Christophe et Masson, Christian. 2005. « Wind turbine performance predictions using a differential actuator-lifting disk model ». Journal of Solar Energy Engineering, vol. 127, nº 2. pp. 200-208.
Compte des citations dans Scopus : 15.

Morency, François

Morency, François, Wang, H., Habashi, W.G., Nadarajah, S., Pueyo, A. et Kafyeke, F.. 2005. « Thermal validation of FENSAP-ICE anti-icing procedure ». In 11th Aerodynamics Symposium, Canadian Aeronautics and Space Institute (Toronto, ON, Canada, Apr. 26-27, 2005)

Nadeau, Sylvie

Alexandru, P. et Nadeau, Sylvie. 2005. « Intégration des aspects de santé et de sécurité à la gestion des opérations dans le travail autonome et polyvalent en environnement incertain ». In La SST: de la pratique à l'intégration-- un défi! : 27e congrès AQHSST, 17, 18, 19 mai 2005, Hôtel des Seigneurs, Saint-Hyacinthe : résumés des conférences (Saint-Hyacinthe, QC, Canada, 17-19 mai, 2005) Association québécoise pour l'hygiène, la santé et la sécurité du travail.

Arteau, Jean, Nadeau, Sylvie, Ngô, Anh Dung et Rivet, Pierre. 2005. « La santé et la sécurité du travail en milieu universitaire: des choix proactifs ». In Colloque la santé et la sécurité du travail au Québec : de la recherche à la pratique : 11 mai 2005 à l'Université du Québec à Chicoutimi dans le cadre du 73e congrès de l'Acfas (Chicoutimi, QC, Canada, 10-15 mai 2005) Chicoutimi, QC, Canada : Réseau de recherche en santé et en sécurité du travail du Québec.

Charlot, E., Kenné, Jean-Pierre et Nadeau, Sylvie. 2005. « Optimal production and lockout/tagout control policies in manufacturing systems ». In 4th International Conference Safety of Industrial Automated Systems (SIAS) (Chicago, IL, USA, Sept. 26-28, 2005)

Julien, B., Nadeau, Sylvie, Voyer, N. et Roy, Claude. 2005. « The use of logic trees to evaluate corporate performance in ergonomics, health and safety ». In Contemporary Ergonomics 2005 (Hatfield, United Kingdom, Apr. 5-7, 2005) pp. 318-321. UK : Taylor & Francis.

Nadeau, Sylvie. 2005. « Can ergonomics (and investments in health and safety) be useful in sustaining a competitive advantage? ». In Contemporary Ergonomics 2005 (Hertfordshire, United Kingdom, Apr. 5-7, 2005) Coll. « Contemporary Ergonomics 2005 » pp. 313-317. UK : Taylor & Francis.

Ngô, Anh Dung

Arteau, Jean, Nadeau, Sylvie, Ngô, Anh Dung et Rivet, Pierre. 2005. « La santé et la sécurité du travail en milieu universitaire: des choix proactifs ». In Colloque la santé et la sécurité du travail au Québec : de la recherche à la pratique : 11 mai 2005 à l'Université du Québec à Chicoutimi dans le cadre du 73e congrès de l'Acfas (Chicoutimi, QC, Canada, 10-15 mai 2005) Chicoutimi, QC, Canada : Réseau de recherche en santé et en sécurité du travail du Québec.

Ho, T.N. et Ngô, Anh Dung. 2005. « Influence of temperature and humidity on the tensile strength and stiffness of hemp and coir fibers ». In 5th Canadian International Composites Conference (Vancouver, BC, Canada, Aug. 16-19, 2005) CACSMA.

Ho, T.N. et Ngô, Anh Dung. 2005. « Sorption of water in hemp and coir fibers ». In 8th International Conference on Woodfiber-Plastic Composites (and other natural fibers) (Madison, WI, USA, May 23-25, 2005)

Sekouri, E.M., Hu, Y.R. et Ngô, Anh Dung. 2005. « Strain-based shape estimation for annular plates ». In ASME International Mechanical Engineering Congress and Exposition (IMECE) (Orlando, FL, USA, Nov. 5-11, 2005) Coll. « ASME Conference Proceedings » pp. 369-374. New York, NY, USA : American Society of Mechanical Engineers.

Petit, Yvan

Petit, Yvan et Bryant, Tim. 2005. « Orthopaedic bearing : past, present and future ». Communication lors de la conférence : Séminaire du Laboratoire de Recherche en Imagerie et Orthopédie (LIO) (Kingston, ON, Canada, Jan. 7, 2005).

Saad, Maarouf

Kadissi, C., Kenné, Jean-Pierre et Saad, Maarouf. 2005. « Drive by wire control of an electro-hydraulic active suspension, a backstepping approach ». In IEEE Conference on Control Applications (CCA) (Toronto, Canada, Aug. 28-31, 2005) pp. 1581-1587. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Sabourin, Robert

Nassif, N., Kajl, Stanislaw et Sabourin, Robert. 2005. « ASHRAE standard's 62 multiple spaces equation for design and control ». In Proceedings from 10th International Conference on Indoor Air Quality and Climate (Beijing, China, Sept. 4-9, 2005) International Society of Indoor Air Quality and Climate.

Nassif, N., Kajl, Stanislaw et Sabourin, Robert. 2005. « Optimal operation of VAV air-conditioning system ». In Air Conditioning, Protection & District Heating 2005 : XI International Conference, Wroclaw - Szklarska, 23-26 June 2005 (Wroclaw, Poland, June 23-26, 2005) pp. 435-440. Wroclaw : Edition PZITS.

Nassif, Nabil, Kajl, Stanislaw et Sabourin, Robert. 2005. « Optimization of HVAC control system strategy using two-objective genetic algorithm ». HVAC&R Research, vol. 11, nº 3. pp. 459-486.
Compte des citations dans Scopus : 151.

Nassif, Nabil, Kajl, Stanislaw et Sabourin, Robert. 2005. « Simplified model-based optimal control of VAV air-conditioning system ». In IBPSA 2005 - International Building Performance Simulation Association 2005 (Montreal, QC, Canada, Aug. 15-18, 2005) pp. 823-830. USA : International Building Performance Simulation Association.

Nassif, Nabil, Kajl, Stanislaw et Sabourin, Robert. 2005. « Ventilation control strategy using supply CO2 concentration setpoint ». HVAC&R Research, vol. 11, nº 2. pp. 239-262.
Compte des citations dans Scopus : 34.

Seers, Patrice

Terrier, P., Seers, P. et Champliaud, H.. 2005. « Comparison of emissions and fuel consumption between gasoline and E85 in a simulated hybrid electric vehicle ». In Powertrain & Fluid Systems Conference and Exhibition (San Antonio, TX, USA, Oct. 24-27, 2005) Coll. « SAE Technical Papers », vol. 2005-01-3829. SAE International.
Compte des citations dans Scopus : 2.

Soulaïmani, Azzeddine

Ata, Riadh et Soulaimani, Azzeddine. 2005. « A stabilized SPH method for inviscid shallow water flows ». International Journal for Numerical Methods in Fluids, vol. 47, nº 2. pp. 139-59.
Compte des citations dans Scopus : 107.

Kerchroud, R., Antoine, X. et Soulaïmani, Azzeddine. 2005. « Numerical accuracy of a padé-type non-reflecting boundary condition for the finite element solution of acoustic scattering problems at high-frequency ». International Journal for Numerical Methods in Engineering, vol. 64, nº 10. pp. 1275-1302.
Compte des citations dans Scopus : 24.

Soulaïmani, Azzeddine, Feng, Zhengkun et Ben Haj Ali, Amine. 2005. « Solution techniques for multi-physics problems with application to computational nonlinear aeroelasticity ». Nonlinear Analysis, vol. 63, nº 5-7. pp. 1585-1595.
Compte des citations dans Scopus : 4.

Touihri, R., Soulaïmani, Azzeddine et Plunian, F.. 2005. « A stabilized finite element formulation applied to the kinematic ponomarenko dynamo problem in cylindrical geometry ». In International Conference of Numerical Analysis and Applied Mathematics (ICNAAM) (Rhodes, Greece, Sept. 16-20, 2005) pp. 544-547. Weinheim, Germany : Wiley-VCH Verlag.

Tahan, Antoine

Castonguay, J. P. et Tahan, A. S.. 2005. « Correlated characteristics identification and effect in statistical tolerance design ». WSEAS Transactions on Mathematics, vol. 4, nº 4. pp. 319-326.

Terriault, Patrick

Baril, Y., Brailovski, Vladimir, Cartier, R. et Terriault, Patrick. 2005. « Feasibility study of a new sternal closure device using tubular braided superelastic nitinol structure ». In Materials and Processes for Medical Devices Conference & Exposition (Boston, MA, USA, Nov. 14-16, 2005) pp. 243-248. Kinsman Road, OH, USA : ASM International.

Gauthier, François-Simon, Vachon, Pierre-Luc, Brailovski, Vladimir et Terriault, Patrick. 2005. « Development of a numerical model for the optimization of damage controlling carbon/epoxy composites containing SMA wires ». In International Workshop on Smart Materials and Structures (Cansmart) (Toronto, ON, Canada, Oct. 12-13, 2006) pp. 261-270. Kingston, Canada : CanSmart Group.

Torra, V., Isalgue, A., Martorell, F., Terriault, Patrick et Lovey, F.. 2005. « Built in dampers for family homes via SMA : an ANSYS computation scheme on the mesoscopic and the microscopic experimental analysis ». In Micromechanics and Microstructure Evolution : Modeling, Simulation and Experiments (Madrid, Spain, Sept. 11-16, 2005)

Torra, V., Isalgue, A., Terriault, Patrick et Lovey, A.. 2005. « From experimental data to quake damping by SMA: a critical experimental analysis and simulation ». In 9th World Seminar on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures (Kobe, Japan, June 13-16, 2005) Japan : Japan Association for Vibration Technologies (JAVIT).

Wong C., Franklin, Boissonneault, Olivier et Terriault, Patrick. 2005. « Hybrid micro-macro-mechanical constitutive model for shape-memory alloys ». In Smart Structures and Materials 2005: Active Materials: Behavior and Mechanics (San Diego, CA, USA, Mar. 7, 2005) Coll. « Proceedings of SPIE », vol. 5761. pp. 417-428. USA : SPIE.
Compte des citations dans Scopus : 4.

Terrier, Philippe

Terrier, P., Seers, P. et Champliaud, H.. 2005. « Comparison of emissions and fuel consumption between gasoline and E85 in a simulated hybrid electric vehicle ». In Powertrain & Fluid Systems Conference and Exhibition (San Antonio, TX, USA, Oct. 24-27, 2005) Coll. « SAE Technical Papers », vol. 2005-01-3829. SAE International.
Compte des citations dans Scopus : 2.

Thomas, Marc

Ayari, H., Thomas, Marc et Doré, Sylvie. 2005. « Développement d'un modèle statistique de prédiction de la durée de vie du rachis lombaire, dépendant de la contrainte appliquée, de l'âge et de la densité osseuse ». Perspectives Interdisciplinaires sur le Travail et la Santé , vol. 7, nº 2. p. 14.

Ayari, H., Thomas, Marc et Doré, Sylvie. 2005. « Évaluation par un modèle d'éléments finis paramétrique des contraintes dynamiques dans le rachis lombaire, dues aux vibrations du corps entier ». Communication lors de la conférence : Séminaire Santé et Sécurité au Travail (SST) (Montréal, QC, Canada, Nov. 2005).

Badri, Béchir, Thomas, Marc, Archambault, René et Sassi, Sadok. 2005. « La transformée de Julien : une nouvelle procédure de traitement de signal pour la détection des chocs ». In 23rd Seminar on Machinery Vibration (Edmonton, AB, Canada, Oct. 26-28, 2005) Calgary, Canada : ACVM.

Bouzidane, A. et Thomas, Marc. 2005. « An electrorheological hydrostatic journal bearing for controlling rotor vibration ». In II Eccomas Thematic Conference on Smart Structures and Materials, Lisbon, 18-21 July 2005 : proceedings and papers (Lisbon, Portugal, July 18-21, 2005)

Guerra, M., Thomas, Marc et David, Éric. 2005. « Turbomachinery blade vibratory stress prediction using contact elements modeling ». In Symposium on the Evaluation, Control, and Prevention of High Cycle Fatigue in Gas Turbine Engines for Land, Sea and Air Vehicles (Seville, Spain, Oct. 3-7, 2005)

Kerboua, Y., Lakis, A.A., Thomas, Marc et Marcouiller, L.. 2005. « Comportement dynamique des plaques rectangulaires submergées ». Montréal : École polytechnique de Montréal. 78 p.

Sassi, S., Cherif, K., Mezghani, L., Thomas, Marc et Kotrane, A. 2005. « An innovative magnetorheological damper for automotive suspension: from design to experimental characterization ». Smart Materials and Structures, vol. 14, nº 4. pp. 811-822.
Compte des citations dans Scopus : 92.

Thomas, Marc, Abassi, K., Lakis, A. A. et Marcouiller, J. L.. 2005. « Analyse modale expérimentale d'une structure soumise à un écoulement turbulent ». In 23rd Seminar on Machinery Vibration (Edmonton, AB, Canada, Oct. 26-28, 2005) Calgary, Canada : CMVA.

Thomas, Marc et Champliaud, Henri. 2005. « Effect of residual stresses on modal parameters of welded structures ». In 23rd Seminar on Machinery Vibration (Edmonton, AB, Canada, Oct. 26-28, 2005) Calgary, Canada : CMVA.

Thomas, Marc et Laville, Frédéric. 2005. « Simulation des vibrations mécaniques par Matlab, Simulink et Ansys ». Québec : Presses de l'Université du Québec. 702 p.

Viens, Martin

Viens, Martin et Wang, Z.. 2005. « HBAR-spectroscopy used for materials characterization ». In 32nd Annual Review of Process in Quantitative Nondestructive Evaluation (Brunswick, ME, USA, Jul. 31-Aug. 5, 2005) Coll. « AIP Conference Proceedings », vol. 820. Melville, NY, USA : American Institute of Physics.

Voix, Jérémie

Voix, Jérémie et Laville, Frédéric. 2005. « Problématiques associées au développement d'un bouchon d'oreille "intelligent" ». Perspectives Interdisciplinaires sur le Travail et la Santé, vol. 7, nº 2.

Voix, Jérémie, Laville, Frédéric et Zeidan, Jean. 2005. « In-situ personal assessment of hearing protector performance--recommendations for an updated standard ». Communication lors de la conférence : 149th Meeting of the Acoustical Society of America (Vancouver, B.C, Canada, May 16-20, 2005).

Vu-Khanh, Toan

Sih, G.C. et Vu-Khanh, Toan, éds. 2005. « Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering ». Montreal : École de technologie supérieure. 532 p.

El Majdoubi, M., Vu-Khanh, Toan et David, Éric. 2005. « Effects of physical aging on fracture and yielding behavior of polypropylene ». In 1st International Conference on Mechanics of Biomaterials & Tissue (Waikoloa, HI, USA, Dec. 11-15, 2005)

Ha Anh, T. et Vu-Khanh, Toan. 2005. « Prediction of mechanical properties of polychloroprene during thermo-oxidative aging ». In 11th International Conference on Fracture 2005, ICF11 (Turin, Italy, Mar. 20-25, 2005) pp. 4485-4490. International Congress on Fracture.
Compte des citations dans Scopus : 1.

Ha-Anh, T. et Vu-Khanh, Toan. 2005. « Effects of thermal aging on fracture performance of polychloroprene ». Journal of Materials Science, vol. 40, nº 19. pp. 5243-5248.
Compte des citations dans Scopus : 20.

Ha-Anh, T. et Vu-Khanh, Toan. 2005. « Prediction of mechanical properties of polychloroprene during thermo-oxidative aging ». Polymer Testing, vol. 24, nº 6. pp. 775-780.
Compte des citations dans Scopus : 77.

Jazouli, Said, Luo, Wenbo, Fabrice, Brémand et Vu-Khanh, Toan. 2005. « Application of time-stress equivalence to nonlinear creep of polycarbonate ». Polymer Testing, vol. 24, nº 4. pp. 463-467.
Compte des citations dans Scopus : 93.

Luo, Wenbo, Vu-Khanh, Toan et Jazouli, Said. 2005. « A stress accelerated characterization method for long-term properties of viscoelastic materials ». In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, Canada, Aug. 1-4, 2005) pp. 68-73. Montréal, Qué., Canada : École de technologie supérieure.

Nguyen, C. T., Vu-Khanh, T. et Lara, J.. 2005. « A study on the puncture resistance of rubber materials used in protective clothing ». In 8th Symposium Performance of Protective Clothing : Global Needs and Emerging Markets (Tampa, FL, USA, Jan. 13-14, 2004) Coll. « ASTM Special Technical Publication », vol. 1462. pp. 175-188. American Society for Testing and Materials.
Compte des citations dans Scopus : 11.

Piroozfar, H., Ha-Anh, T. et Vu-Khanh, Toan. 2005. « Effects of solvent in swelling behaviour and mechanical properties of polychloroprene ». In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, Canada, Aug. 1-4, 2005) pp. 45-51. Montréal, Qué., Canada : École de technologie supérieure.

Thang Nguyen, C., Vu-Khanh, T. et Lara, J.. 2005. « A study on the puncture resistance of rubber materials used in protective clothing ». Journal of ASTM International, vol. 2, nº 4. pp. 245-258.
Compte des citations dans Scopus : 11.

Vu Thi, B. N., Vu-Khanh, T. et Lara, J.. 2005. « Effect of friction on cut resistance of polymers ». Journal of Thermoplastic Composite Materials, vol. 18, nº 1. pp. 23-36.
Compte des citations dans Scopus : 28.

Vu, T. B. N., Vu-Khanh, T. et Lara, J.. 2005. « Progress in the characterization of the cutting resistance of protective materials ». Journal of ASTM International, vol. 2, nº 5. pp. 399-413.
Compte des citations dans Scopus : 6.

Vu-Khanh, Toan, Vu, Thi Bich Nga, Nguyen, C. Thang et Lara, Jaime. 2005. « Gants de protection : étude sur la résistance des gants aux agresseurs mécaniques multiples ». Coll. « Études et Recherches », vol. R-424. Montréal, Canada : IRSST. 75 p.

de Guise, Jacques A.

Lavoie, F., Laplante, M., Parent, G., Duval, N., Doré, Sylvie et de Guise, Jacques A.. 2005. « Gesture and posture as important factors in 3D kinematic assessment of the knee ». Communication lors de la conférence : 31st Meeting of the Canadian Orthopaedic Residents Association (Montreal, QC, Canada, June 2-5, 2005).

Lavoie, F., Laplante, M., Parent, G., Duval, N., Doré, Sylvie et de Guise, Jacques A.. 2005. « Gesture and posture as important factors in 3D kinematic assessment of the knee ». Communication lors de la conférence : Research Day of the Programme d'Orthopédie Édouard-Samson (Montreal, QC, Canada, May 6, 2005).

Lavoie, F., Laplante, M., Parent, G., Duval, N., Doré, Sylvie et de Guise, Jacques A.. 2005. « Gesture standardization increases the reproducibility of 3D kinematic measurements of the knee joint ». Communication lors de la conférence : 60th Canadian Orthopaedic Association Annual Meeting (Montreal, QC, Canada, June 3-5, 2005).

Cette liste a été générée le Thu Mar 28 01:48:21 2024 EDT.