ENGLISH
La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS
RECHERCHER

Liste des publications de "Ahmadi, Ali"

Exporter en format [Atom feed] Atom [RSS feed] RSS 1.0 [RSS2 feed] RSS 2.0
Groupement par Année | Type de document | Sans groupement
Nombre de documents archivés : 87.

Ahmadi, A., Devlin, K. D., Najjaran, H., Holzman, J. F. et Hoorfar, M.. 2010. « Biomolecular adsorption phenomena in electrowetting-based digital microfluidic devices ». In Nanotechnology 2010: Electronics, Devices, Fabrication, MEMS, Fluidics and Computational - Technical Proceedings of the 2010 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2010 (Anaheim, CA, USA, June 21-24, 2010) pp. 452-455. Boston, Mass. ; Boca Raton, Fla. : Nano Science and Technology Institute ; CRC Press.

Ahmadi, A., McDermid, C. M. et Markley, L.. 2016. « Magnetohydrodynamic actuation of droplets for millimetric planar fluidic systems ». Applied Physics Letters, vol. 108, nº 1.
Compte des citations dans Scopus : 3.

Ahmadi, A., Najjaran, H., Holzman, J. F. et Hoorfar, M.. 2009. « Determination of droplet shape in digital microfluidic systems using two-dimensional flow analysis ». In Technical Proceedings of the 2009 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2009 (Houston, TX, USA, May 03-07, 2009) pp. 351-354. Boston : Nano Science and Technology Institute.
Compte des citations dans Scopus : 2.

Ahmadi, A., Najjaran, H., Holzman, J. F. et Hoorfar, M.. 2008. « Numerical modeling of microdrop motion in a digital microfluidic multiplexer ». In Technical Proceedings of the 2008 NSTI Nanotechnology Conference and Trade Show, NSTI-Nanotech, Nanotechnology 2008 (Boston, MA, USA, June 01-05, 2008) pp. 561-564. Boston ; Boca Raton, FL : Nano Science and Technology Institute ; CRC Press.
Compte des citations dans Scopus : 1.

Ahmadi, A., Najjaran, H., Holzman, J. F. et Hoorfar, M.. 2009. « Two-dimensional flow dynamics in digital microfluidic systems ». Journal of Micromechanics and Microengineering, vol. 19, nº 6.
Compte des citations dans Scopus : 26.

Ahmadi, A., Nichols, J., Hoorfar, M., Najjaran, H. et Holzman, J. F.. 2009. « Digital implementations for integrated microfluidic sensing ». In Micro- and Nanotechnology Sensors, Systems, and Applications (Orlando, FL, USA, Apr. 15-17, 2009) Coll. « Proceedings of SPIE », vol. 7318. SPIE.
Compte des citations dans Scopus : 3.

Ahmadi, Ali, Buat, Matthew D. et Hoorfar, Mina. 2013. « Microdroplet evaporation in closed digital microfluidic biochips ». Journal of Micromechanics and Microengineering, vol. 23, nº 4.
Compte des citations dans Scopus : 5.

Ahmadi, Ali, Devlin, Kurt D. et Hoorfar, Mina. 2012. « Numerical study of the microdroplet actuation switching frequency in digital microfluidic biochips ». Microfluidics and Nanofluidics, vol. 12, nº 1-4. pp. 295-305.
Compte des citations dans Scopus : 5.

Ahmadi, Ali, Devlin, Kurt D., Najjaran, Homayoun, Holzman, Jonathan F. et Hoorfar, Mina. 2010. « In situ characterization of microdroplet interfacial properties in digital microfluidic systems ». Lab on a Chip, vol. 10, nº 11. pp. 1429-1435.
Compte des citations dans Scopus : 28.

Ahmadi, Ali, Holzman, Jonathan F., Najjaran, Homayoun et Hoorfar, Mina. 2011. « Electrohydrodynamic modeling of microdroplet transient dynamics in electrocapillary-based digital microfluidic devices ». Microfluidics and Nanofluidics, vol. 10, nº 5. pp. 1019-1032.
Compte des citations dans Scopus : 19.

Ahmadi, Ali, Holzman, Jonathan F., Najjaran, Homayoun et Hoorfar, Mina. 2010. « Numerical multiphysics modeling of microdroplet motion dynamics in digital microfluidic systems ». In ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels collocated with 3rd Joint US-European Fluids Engineering Summer Meeting (Montreal, QC, Canada, Aug. 01-05, 2010) pp. 249-253. The American Society of Mechanical Engineers.
Compte des citations dans Scopus : 1.

Ahmadi, Ali et Hoorfar, Mina. 2011. « Numerical investigation of the combined effects of biomolecular adsorption and microdroplet evaporation on the performance of the electrocapillary-based digital microfluidic systems ». In ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels (Edmonton, AB, Canada, June 19-22, 2011) pp. 139-147. The American Society of Mechanical Engineers.

Alkayyali, T., Cameron, T., Haltli, B., Kerr, R. G. et Ahmadi, A.. 2019. « Microfluidic and cross-linking methods for encapsulation of living cells and bacteria - A review ». Analytica Chimica Acta, vol. 1053. pp. 1-21.
Compte des citations dans Scopus : 57.

Alkayyali, Tartela et Ahmadi, Ali. 2020. « Fabrication of microfluidic chips using controlled dissolution of 3D printed scaffolds ». Journal of Applied Polymer Science, vol. 137, nº 46.
Compte des citations dans Scopus : 9.

Alkayyali, Tartela, Haltli, Bradley, Kerr, Russell G. et Ahmadi, Ali. 2018. « A microbial domestication pod for the discovery of natural products ». In 22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Kaohsiung, Taiwan, Nov. 11-15, 2018) pp. 1707-1710. Chemical and Biological Microsystems Society.

Alkayyali, Tartela, Pope, Emily, Haltli, Bradley, Kerr, Russell G. et Ahmadi, Ali. 2019. « Cultivation of 'uncultivable' marine sediment bacteria using a microbial domestication pod (MD Pod) ». In 23rd International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Basel, Switzerland, Oct. 27-31, 2019) pp. 528-529. Chemical and Biological Microsystems Society.

Alkayyali, Tartela, Pope, Emily, Wheatley, Sydney K., Cartmell, Christopher, Haltli, Bradley, Kerr, Russell G. et Ahmadi, Ali. 2021. « Development of a microbe domestication pod (MD Pod) for in situ cultivation of micro-encapsulated marine bacteria ». Biotechnology and Bioengineering, vol. 118, nº 3. pp. 1166-1176.
Compte des citations dans Scopus : 15.

Badr, S., MacCallum, B., Madadian, E., Kerr, G., Naseri, E., MacDonald, D., Bodaghkhani, A., Tasker, R. A. et Ahmadi, A.. 2022. « Development of a mist-based printhead for droplet-based bioprinting of ionically crosslinking hydrogel bioinks ». Bioprinting, vol. 27.
Compte des citations dans Scopus : 5.

Badr, Sara, Madadian, Elias, MacDonald, Debra S., Tasker, R. Andrew et Ahmadi, Ali. 2023. « A mist-based crosslinking technique for coaxial bioprinting of hollow hydrogel fibers ». Bioprinting, vol. 35.

Bayansal, F., Yuksel, M. T., MacDougall, S. et Ahmadi, A.. 2024. « Fabrication and characterization of chemiresistive CuO sensors sensitized by Ca-doping for detection of sweat electrolyte concentration ». Ceramics International.
(Sous presse)

Beyer, S. T., Bsoul, A., Ahmadi, A. et Walus, K.. 2013. « 3D alginate constructs for tissue engineering printed using a coaxial flow focusing microfluidic device ». In Transducers & Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS & EUROSENSORS XXVII) (Barcelona, Spain, June 16-20, 2013) pp. 1206-1209. IEEE.
Compte des citations dans Scopus : 29.

Bsoul, Anas, Beyer, Simon, Ahmadi, Ali, Stoeber, Boris, Cretu, Edniond et Walus, Konrad. 2013. « Molded biocompatible and disposable PDMS/SU-8 inkjet dispenser ». In 17th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Freiburg, Germany, Oct. 27-31, 2013) pp. 636-638. Chemical and Biological Microsystems Society.
Compte des citations dans Scopus : 5.

Butler, Haley M., Naseri, Emad, MacDonald, Debra S., Tasker, R. Andrew et Ahmadi, Ali. 2021. « Investigation of rheology, printability, and biocompatibility of N,O-carboxymethyl chitosan and agarose bioinks for 3D bioprinting of neuron cells ». Materialia, vol. 18.
Compte des citations dans Scopus : 16.

Butler, Haley M., Naseri, Emad, MacDonald, Debra S., Tasker, R. Andrew et Ahmadi, Ali. 2020. « Optimization of starch- and chitosan-based bio-inks for 3D bioprinting of scaffolds for neural cell growth ». Materialia, vol. 12.
Compte des citations dans Scopus : 22.

Cameron, Tiffany, Naseri, Emad, MacCallum, Ben et Ahmadi, Ali. 2020. « Development of a disposable single-nozzle printhead for 3D bioprinting of continuous multi-material constructs ». Micromachines, vol. 11, nº 5.
Compte des citations dans Scopus : 13.

Cella, Monica Angela, Coulson, Thomas, MacEachern, Samantha, Badr, Sara, Ahmadi, Ali, Tabatabaei, Mahdis Sadat, Labbe, Alain et Griffiths, Mansel William. 2023. « Probiotic disruption of quorum sensing reduces virulence and increases cefoxitin sensitivity in methicillin-resistant Staphylococcus aureus ». Scientific Reports, vol. 13, nº 1.
Compte des citations dans Scopus : 7.

Chahal, Daljeet, Ahmadi, Ali et Cheung, Karen C.. 2012. « Improving piezoelectric cell printing accuracy and reliability through neutral buoyancy of suspensions ». Biotechnology and Bioengineering, vol. 109, nº 11. pp. 2932-2940.
Compte des citations dans Scopus : 70.

Cheng, E., Ahmadi, A. et Cheung, K. C.. 2015. « Measurement of the oscillatory flow field inside tapered cylindrical inkjet nozzles using micro-particle image velocimetry ». Microfluidics and Nanofluidics, vol. 19, nº 3. pp. 635-646.
Compte des citations dans Scopus : 6.

Cheng, Eric, Ahmadi, Ali et Cheung, Karen C.. 2014. « Investigation of the hydrodynamics of suspended cells for reliable inkjet cell printing ». In ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels collocated with the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting (Chicago, IL, USA, Aug. 03-07, 2014) American Society of Mechanical Engineers.
Compte des citations dans Scopus : 6.

Cheng, Eric, Yu, Haoran, Ahmadi, Ali et Cheung, Karen C.. 2016. « Investigation of the hydrodynamic response of cells in drop on demand piezoelectric inkjet nozzles ». Biofabrication, vol. 8, nº 1.
Compte des citations dans Scopus : 57.

Cheng, Eric, Yu, Haoran, Ahmadi, Ali et Cheung, Karen C.. 2016. « Rheological manipulation for improved reliability in inkjet printing of living cells ». In IEEE 29th International Conference on Micro Electro Mechanical Systems (MEMS) (Shanghai, China, Jan. 24-28, 2016) pp. 784-787. Institute of Electrical and Electronics Engineers Inc..

Devlin, K. D., Ahmadi, A., Najjaran, H., Holzman, J. F. et Hoorfar, M.. 2010. « Dynamic sampling in digital microfluidic devices ». In Micro- and Nanotechnology Sensors, Systems, and Applications II (Orland, FL, USA, May 5, 2010) Coll. « Proceedings of SPIE », vol. 7679. SPIE.

Enright, B., Cheng, E., Yu, H., Cheung, K. C. et Ahmadi, A.. 2020. « Inkjet system design optimization for reliable cell printing ». In 21st International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Savannah, GA, USA, Oct. 22-26, 2017) pp. 1149-1150. Chemical and Biological Microsystems Society.

Feng, Shanghuan, Kang, Kang, Salaudeen, Shakirudeen, Ahmadi, Ali, He, Quan Sophia et Hu, Yulin. 2022. « Recent advances in algae-derived biofuels and bioactive compounds ». Industrial and Engineering Chemistry Research, vol. 61, nº 3. pp. 1232-1249.
Compte des citations dans Scopus : 9.

Gallant, B., Gamble, A., Harding, C., Mayhew, J., Parker, A., Simmons, A. et Ahmadi, A.. 2017. « Ultra-portable, selective and diffusion-based breathalyzer ». In ISOCS/IEEE International Symposium on Olfaction and Electronic Nose (ISOEN) (Montreal, QC, Canada, May 28-31, 2017) Institute of Electrical and Electronics Engineers Inc..
Compte des citations dans Scopus : 1.

Gorji, Mohsen, Zarbaf, Dara, Mazinani, Saeedeh, Noushabadi, Abolfazl Sajadi, Cella, Monica A., Sadeghianmaryan, Ali et Ahmadi, Ali. 2023. « Multi-responsive on-demand drug delivery PMMA-co-PDEAEMA platform based on CO2, electric potential, and pH switchable nanofibrous membranes ». Journal of Biomaterials Science-Polymer Edition, vol. 32, nº 3. pp. 351-371.
Compte des citations dans Scopus : 4.

He, K., Ahmadi, A., Walus, K. et Stoeber, B.. 2015. « On demand EWOD dropl let formation at a microfluidic T-junction ». In Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS) (Anchorage, AK, USA, June 21-25, 2015) pp. 1846-1849. Institute of Electrical and Electronics Engineers Inc..

Legault, Ryan et Ahmadi, Ali. 2023. « Investigation of carboxymethyl chitosan in the development of biodegradable soft bait fishing lures ». Frontiers in Marine Science, vol. 10.

Legault, Ryan, Naseri, Emad, Madadian, Elias et Ahmadi, Ali. 2023. « Development of a biodegradable soft bait fishing lure ». Fisheries Research, vol. 264.

Li, Y., Ahmadi, A., Yu, H. et Cheung, K. C.. 2016. « Beyond poisson: Passive focusing toward one-cell-per-drop printing ». In 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Dublin, Ireland, Oct. 09-13, 2016) pp. 735-736. Chemical and Biological Microsystems Society.

Li, Yan, Cheng, Eric, Yu, Haoran, Ahmadi, Ali et Cheung, Karen C.. 2016. « Investigations of bio-ink rheological properties for drop on demand piezoelectric cell printing ». In Solid-State Sensors, Actuators and Microsystems Workshop (Hilton Head Island, SC, USA, June 05-09, 2016) pp. 306-309. Transducer Research Foundation.

Luka, George, Ahmadi, Ali, Najjaran, Homayoun, Alocilja, Evangelyn, Derosa, Maria, Wolthers, Kirsten, Malki, Ahmed, Aziz, Hassan, Althani, Asmaa et Hoorfar, Mina. 2015. « Microfluidics integrated biosensors: A leading technology towards lab-on-A-chip and sensing applications ». Sensors, vol. 15, nº 12. pp. 30011-30031.
Compte des citations dans Scopus : 366.

MacCallum, B., Naseri, E., Butler, H., MacNevin, W., Tasker, R. A. et Ahmadi, A.. 2020. « Development of a 3D bioprinting system using a Co-Flow of calcium chloride mist ». Bioprinting, vol. 20.
Compte des citations dans Scopus : 15.

MacCallum, Ben, Badr, Sara, Naseri, Emad, Bodaghkhani, Armin et Ahmadi, Ali. 2020. « Development of a mist-based hydrogel crosslinking printhead for droplet-based bioprinting ». In MicroTAS 2020 - 24th International Conference on Miniaturized Systems for Chemistry and Life Sciences (En ligne, Oct. 04-09, 2020) pp. 384-385. Chemical and Biological Microsystems Society.

MacCallum, Ben, Naseri, Emad, MacNevin, Wyatt et Ahmadi, Ali. 2019. « 3D bioprinting of alginate hydrogel scaffolds using fine calcium chloride mist droplets ». In 23rd International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Basel, Switzerland, Oct. 27-31, 2019) pp. 1668-1669. Chemical and Biological Microsystems Society.

Macdougall, Samantha, Bayansal, Fatih et Ahmadi, Ali. 2022. « Emerging methods of monitoring volatile organic compounds for detection of plant pests and disease ». Biosensors, vol. 12, nº 4.
Compte des citations dans Scopus : 16.

Madadian, E., Badr, S., MacDonald, D. S., Tasker, R. A. et Ahmadi, A.. 2023. « Development of foam-based support material for coaxial bioprinting of ionically crosslinking bioinks ». Bioprinting, vol. 32.
Compte des citations dans Scopus : 2.

Madadian, Elias, Naseri, Emad, Legault, Ryan et Ahmadi, Ali. 2023. « Development of 3D-Printable Albumin-Alginate Foam for Wound Dressing Applications ». 3D Printing and Additive Manufacturing.
(Sous presse)

Madadian, Elias, Ravanbakhsh, Hossein, Touani Kameni, Francesco, Rahimnejad, Maedeh, Lerouge, Sophie et Ahmadi, Ali. 2024. « In-foam bioprinting: An embedded bioprinting technique with self-removable support bath ». Small Science.
(Sous presse)

Mazyan, W. I., Ahmadi, A., Ahmed, H. et Hoorfar, M.. 2017. « Enhancement of solid particle separation efficiency in gas cyclones using electro-hydrodynamic method ». Separation and Purification Technology, vol. 182. pp. 29-35.
Compte des citations dans Scopus : 13.

Mazyan, W. I., Ahmadi, A., Ahmed, H. et Hoorfar, M.. 2017. « Increasing efficiency of natural gas cyclones through addition of tangential chambers ». Journal of Aerosol Science, vol. 110. pp. 36-42.
Compte des citations dans Scopus : 23.

Mazyan, W. I., Ahmadi, A., Ahmed, H. et Hoorfar, M.. 2020. « Increasing the COP of a refrigeration cycle in natural gas liquefaction process using refrigerant blends of Propane-NH3, Propane-SO2 and Propane-CO2 ». Heliyon, vol. 6, nº 8.
Compte des citations dans Scopus : 6.

Mazyan, W. I., Ahmadi, A., Ahmed, H. et Hoorfar, M.. 2015. « Investigation of methods of enhancing the performance of propane pre-cooling refrigeration cycles in natural gas liquefaction processes ». In Abu Dhabi International Petroleum Exhibition and Conference (ADIPEC) (Abu Dhabi, UAE, Nov. 09-12, 2015) Society of Petroleum Engineers.

Mazyan, W. I., Ahmadi, A., Brinkerhoff, J., Ahmed, H. et Hoorfar, M.. 2018. « Enhancement of cyclone solid particle separation performance based on geometrical modification: Numerical analysis ». Separation and Purification Technology, vol. 191. pp. 276-285.
Compte des citations dans Scopus : 34.

Mazyan, W. I., Ahmadi, A., Jesus, R. D., Ahmed, H. et Hoorfar, M.. 2016. « Use of ferrous powder for increasing the efficiency of solid particle filtration in natural gas cyclones ». Separation Science and Technology, vol. 51, nº 12. pp. 2098-2104.
Compte des citations dans Scopus : 3.

Mazyan, W., Ahmadi, A., Ahmed, H. et Hoorfar, M.. 2016. « Market and technology assessment of natural gas processing: A review ». Journal of Natural Gas Science and Engineering, vol. 30. pp. 487-514.
Compte des citations dans Scopus : 65.

Mazyan, Walid I., O’connor, Ellen, Martin, Elia, Vogt, Anja, Charter, Edward et Ahmadi, Ali. 2021. « Effects of temperature and extraction time on avocado flesh (Persea americana) total phenolic yields using subcritical water extraction ». Processes, vol. 9, nº 1.
Compte des citations dans Scopus : 4.

Naseri, Emad et Ahmadi, Ali. 2022. « A review on wound dressings: Antimicrobial agents, biomaterials, fabrication techniques, and stimuli-responsive drug release ». European Polymer Journal, vol. 173.
Compte des citations dans Scopus : 28.

Naseri, Emad, Butler, Haley, MacNevin, Wyatt, Ahmed, Marya et Ahmadi, Ali. 2020. « Low-temperature solvent-based 3D printing of PLGA: A parametric printability study ». Drug Development and Industrial Pharmacy, vol. 46, nº 2. pp. 173-178.
Compte des citations dans Scopus : 22.

Naseri, Emad, Cartmell, Christopher, Saab, Matthew, Kerr, Russell G. et Ahmadi, Ali. 2020. « Development of 3D printed drug-eluting scaffolds for preventing piercing infection ». Pharmaceutics, vol. 12, nº 9.
Compte des citations dans Scopus : 17.

Naseri, Emad, Cartmell, Christopher, Saab, Matthew, Kerr, Russell G. et Ahmadi, Ali. 2021. « Development of N,O-Carboxymethyl Chitosan-starch biomaterial inks for 3D printed wound dressing applications ». Macromolecular Bioscience, vol. 21, nº 12.
Compte des citations dans Scopus : 18.

Naseri, Emad, Van Beek, Anthony et Ahmadi, Ali. 2022. « Application of electrowetting on dielectric (EWOD) in drug release control and release-on-demand ». Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 654.
Compte des citations dans Scopus : 4.

Nejad, Hojatollah Rezaei, Samiei, Ehsan, Ahmadi, Ali et Hoorfar, Mina. 2015. « Gravity-driven hydrodynamic particle separation in digital microfluidic systems ». RSC Advances, vol. 5, nº 45. pp. 35966-35975.
Compte des citations dans Scopus : 14.

Nichols, Jackie, Ahmadi, Ali, Hoorfar, Mina, Najjaran, Homayoun et Holzman, Jonathan F.. 2008. « Micro-drop actuation using multiplexer structures ». In ASME 2008 6th International Conference on Nanochannels, Microchannels, and Minichannels (Darmstadt, Germany, June 23-25, 2008) pp. 1085-1092. The American Society of Mechanical Engineers.
Compte des citations dans Scopus : 3.

Nichols, Jacqueline, Ahmadi, Ali, Hoorfar, Mina, Najjaran, Homayoun et Holzman, Jonathan F.. 2009. « In situ digital microfluidic conductance sampling ». Sensors and Actuators, A: Physical, vol. 152, nº 1. pp. 13-20.
Compte des citations dans Scopus : 4.

Nikdel, Mozhgan, Rajabinejad, Hossein, Yaghoubi, Hashem, Mikaeiliagah, Elmira, Cella, Monica A., Sadeghianmaryan, Ali et Ahmadi, Ali. 2021. « Fabrication of cellulosic nonwoven material coated with polyvinyl alcohol and zinc oxide/mesoporous silica nanoparticles for wound dressing purposes with cephalexin delivery ». ECS Journal of Solid State Science and Technology, vol. 10, nº 5.
Compte des citations dans Scopus : 11.

Paknahad, Mohammad, Ahmadi, Ali, Enright, Breanne, Cheung, Karen C. et Hoorfar, Mina. 2016. « Density-based single particle isolation using micro-wells on digital microfluidics ». In 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Dublin, Ireland, Oct. 09-13, 2016) pp. 880-881. Chemical and Biological Microsystems Society.

Paknahad, Mohammad, Ahmadi, Ali et Hoorfar, Mina. 2016. « Diffusion-based microfluidic breath analyzer for detection of cannabis use ». In 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Dublin, Ireland, Oct. 09-13, 2016) pp. 1272-1273. Chemical and Biological Microsystems Society.

Paknahad, Mohammad, Ahmadi, Ali, Rousseau, Jacques, Nejad, Hojatollah Rezaei et Hoorfar, Mina. 2017. « On-chip electronic nose for wine tasting: A digital microfluidic approach ». IEEE Sensors Journal, vol. 17, nº 14. pp. 4322-4329.
Compte des citations dans Scopus : 31.

Paknahad, Mohammad, Bachhal, Jannat Singh, Ahmadi, Ali et Hoorfar, Mina. 2017. « Characterization of channel coating and dimensions of microfluidic-based gas detectors ». Sensors and Actuators, B: Chemical, vol. 241. pp. 55-64.
Compte des citations dans Scopus : 44.

Paknahad, Mohammad, Bachhal, Jannat Singh, Ahmadi, Ali et Hoorfar, Mina. 2016. « Highly selective multi-target 3D-printed microfluidic-based breath analyzer ». In IEEE 29th International Conference on Micro Electro Mechanical Systems (MEMS) (Shanghai, China, Jan. 24-28, 2016) pp. 905-908. Institute of Electrical and Electronics Engineers Inc..
Compte des citations dans Scopus : 13.

Parker, B., Samanipour, R., Ahmadi, A. et Kim, K.. 2016. « Rapid fabrication of circular channel microfluidic flow-focusing devices for hydrogel droplet generation ». Micro and Nano Letters, vol. 11, nº 1. pp. 41-45.
Compte des citations dans Scopus : 22.

Pope, Emily, Alkayyali, Tartela, Wheatley, Sydney K., Cartmell, Christopher, McDonald, Jultwahnique, Haltli, Bradley, Kerr, Russell G. et Ahmadi, Ali. 2020. « Optimization of marine bacteria microencapsualtion for the discovery of novel marine natural products ». In MicroTAS 2020 - 24th International Conference on Miniaturized Systems for Chemistry and Life Sciences (En ligne, Oct. 04-09, 2020) pp. 811-812. Chemical and Biological Microsystems Society.

Pope, Emily, Cartmell, Christopher, Haltli, Bradley, Ahmadi, Ali et Kerr, Russell G.. 2022. « Microencapsulation and in situ incubation methodology for the cultivation of marine bacteria ». Frontiers in Microbiology, vol. 13.
Compte des citations dans Scopus : 7.

Pope, Emily, Haltli, Bradley, Kerr, Russell G. et Ahmadi, Ali. 2022. « Effects of matrix composition and temperature on viability and metabolic activity of microencapsulated marine bacteria ». Microorganisms, vol. 10, nº 5.
Compte des citations dans Scopus : 1.

Rezaei Nejad, H., Samiei, E., Ahmadi, A. et Hoorfar, M.. 2014. « Hydrodynamic density-based particle focusing in digital microfluidic systems ». In 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (San Antonio, TX, USA, Oct. 26-30, 2014) pp. 1446-1448. Chemical and Biological Microsystems Society.

Sadeghianmaryan, Ali, Naghieh, Saman, Salimi, Ali, Kabiri, Kourosh, Cella, Monica A. et Ahmadi, Ali. 2022. « Fabrication of cellulosic nonwoven-based wound dressings coated with CTAB-loaded double network PAMPS/PNaA hydrogels ». Journal of Natural Fibers, vol. 19, nº 16. pp. 12718-12735.
Compte des citations dans Scopus : 2.

Samanipour, Roya, Wang, Zongjie, Ahmadi, Ali et Kim, Keekyoung. 2016. « Experimental and computational study of microfluidic flow-focusing generation of gelatin methacrylate hydrogel droplets ». Journal of Applied Polymer Science, vol. 133, nº 29.
Compte des citations dans Scopus : 29.

Warner, Cael, McDermid, Cameron M., Ahmadi, Ali et Markley, Loïc. 2019. « Impact of electrode design and voltage waveform on low-potential magnetohydrodynamic fluid actuation ». Microfluidics and Nanofluidics, vol. 23, nº 7.
Compte des citations dans Scopus : 1.

Wheatley, Sydney K., Cartmell, Christopher, Haltli, Bradley A., Kerr, Russell G. et Ahmadi, Ali. 2020. « Development of a micro-microbial domestication pod for in-situ marine bacterial cultivation ». In MicroTAS 2020 - 24th International Conference on Miniaturized Systems for Chemistry and Life Sciences (En ligne, Oct. 04-09, 2020) pp. 438-439. Chemical and Biological Microsystems Society.

Wheatley, Sydney K., Cartmell, Christopher, Madadian, Elias, Badr, Sara, Haltli, Bradley A., Kerr, Russell G. et Ahmadi, Ali. 2022. « Microfabrication of a micron-scale microbial-domestication pod for in situ cultivation of marine bacteria ». RSC Advances, vol. 12, nº 43. pp. 28123-28127.
Compte des citations dans Scopus : 2.

Winer, M. H., Ahmadi, A. et Cheung, K. C.. 2014. « Effects of density difference between particles and fluid on inertial focusing positions in transient micro-flows ». In 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (San Antonio, TX, USA, Oct. 26-30, 2014) pp. 2462-2464. Chemical and Biological Microsystems Society.
Compte des citations dans Scopus : 1.

Winer, Michael H., Ahmadi, Ali et Cheung, Karen C.. 2014. « Apparent size correlation: A simple method to determine vertical positions of particles using conventional microscopy ». In IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS) (San Francisco, CA, USA, Jan. 26-30, 2014) pp. 939-942. Institute of Electrical and Electronics Engineers Inc..
Compte des citations dans Scopus : 1.

Winer, Michael H., Ahmadi, Ali et Cheung, Karen C.. 2014. « Application of a three-dimensional (3D) particle tracking method to microfluidic particle focusing ». Lab on a Chip, vol. 14, nº 8. pp. 1443-1451.
Compte des citations dans Scopus : 24.

Winer, Michael H., Ahmadi, Ali et Cheung, Karen C.. 2014. « Transient inertial flows: A new degree of freedom for particle focusing in microfluidic channels ». In IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS) (San Francisco, CA, USA, Jan. 26-30, 2014) pp. 1051-1054. Institute of Electrical and Electronics Engineers Inc..
Compte des citations dans Scopus : 2.

Yafia, M., Ahmadi, A., Yesilcimen, K., Hoorfar, M. et Najjaran, H.. 2015. « Low cost smartphone controlled digital microfluidic chip in a 3D-printed modular assembly with replacable glass and screen printed paper chips ». In MicroTAS 2015 - 19th International Conference on Miniaturized Systems for Chemistry and Life Sciences (Gyeongju, South Korea, Oct. 25-29, 2015) pp. 2099-2100. Chemical and Biological Microsystems Society.

Yafia, Mohamed, Ahmadi, Ali, Hoorfar, Mina et Najjaran, Homayoun. 2015. « Ultra-portable smartphone controlled integrated digital microfluidic system in a 3D-printed modular assembly ». Micromachines, vol. 6, nº 9. pp. 1289-1305.
Compte des citations dans Scopus : 30.

Cette liste a été générée le Thu Mar 28 01:39:52 2024 EDT.