| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Liste des publications de "Bouzid, Hakim"Nombre de documents archivés : 301. 2024
Belhaou, Meriem, Laghzale, Nor Eddine et Bouzid, Abdel-Hakim.
2024.
« Residual stresses in autofrettaged functionally graded pressurized thick cylinders ».
International Journal of Pressure Vessels and Piping, vol. 208.
Benfriha, Khaled, Adjoul, Oussama, Bouzid, Abdel-Hakim et Wardle, Peter.
2024.
« Interactive design on the product life cycle costs: a case study ».
International Journal on Interactive Design and Manufacturing, vol. 18, nº 2.
pp. 837-846.
Bouzid, Abdel-Hakim, Bouzid, Sofiane et Benfriha, Khaled.
2024.
« On the strength and tightness of ASME B16.5 and B16.47 series a standard flanges ».
Journal of Pressure Vessel Technology, vol. 146, nº 1.
Hakimian, Soorosh, Bouzid, Abdel-Hakim et Hof, Lucas A..
2024.
« An improved fixture to quantify corrosion in bolted flanged gasketed joints ».
Journal of Pressure Vessel Technology, vol. 146, nº 1.
Hakimian, Soorosh, Bouzid, Abdel-Hakim et Hof, Lucas A..
2024.
« Effect of gap size on flange face corrosion ».
Materials and Corrosion-Werkstoffe Und Korrosion.
Hakimian, Soroosh, Bouzid, Abdel-Hakim et Hof, Lucas A..
2024.
« Corrosion failures of flanged gasketed joints: A review ».
Journal of Advanced Joining Processes, vol. 9.
Rousseau, Rashique Iftekhar, Bouzid, Abdel-Hakim et Zhao, Zijian.
2024.
« On the re-evaluation of the clamped members stiffness of bolted joints ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 48, nº 1.
pp. 75-83.
Zhao, Zijan et Bouzid, Abdel-Hakim.
2024.
« A study on the contact quality improvement of fin to tube assemblies ».
Transactions of the Canadian Society for Mechanical Engineering.
2023
Bouzid, Abdel-Hakim et Bouzid, Sofiane.
2023.
« Integrity and leak tightness of ASME B.16.5 and B.16.47 flanges used in nuclear piping systems ».
In 30th International Conference on Nuclear Engineering (ICONE30) (Kyoto, Japan, May 21-26, 2023)
Coll. « The Proceedings of the International Conference on Nuclear Engineering (ICONE) », vol. 2023-30.
American Society of Mechanical Engineers (ASME).
Bouzid, Abdel-Hakim, Bouzid, Sofiane et Benfriha, Khaled.
2023.
« Effect of bolt-up stress level on the strength of ASME B16.5 and B16.47 standard flanges ».
In Proceedings of the ASME Pressure Vessels & Piping Conference (Atlanta, GA, USA, July 16-21, 2023)
American Society of Mechanical Engineers (ASME).
Bouzid, Abdel-Hakim et Das, Shubhra Kanti.
2023.
« Long-term performance of semimetallic gaskets ».
Journal of Nuclear Engineering and Radiation Science, vol. 9, nº 3.
Bouzid, Sofiane, Bouzid, Abdel-Hakim et Ngo, Anh-Dung.
2023.
« Stress analysis of ASME section X flanges using classical lamination theory ».
Journal of Pressure Vessel Technology, vol. 145, nº 3.
Charrier, Quentin, Hakam, Nisar, Benfriha, Khaled, Meyrueis, Vincent, Liotard, Cyril, Bouzid, Abdel-Hakim et Aoussat, Améziane.
2023.
« Towards the augmentation of digital twin performance ».
Sensors, vol. 23, nº 22.
Hakimian, Soroosh, Bouzid, Abdel-Hakim et Hof, Lucas A..
2023.
« The effects of fluid working conditions on flange face corrosion ».
In Proceedings of the ASME Pressure Vessels & Piping Conference (Atlanta, GA, USA, July 16-21, 2023)
American Society of Mechanical Engineers (ASME).
Hakimian, Soroosh, Pourrahimi, Shamim, Bouzid, Abdel-Hakim et Hof, Lucas A..
2023.
« Application of machine learning for the classification of corrosion behavior in different environments for material selection of stainless steels ».
Computational Materials Science, vol. 228.
Pourrahimi, Shamim, Hakimian, Soroosh, Bouzid, Abdel-Hakim et Hof, Lucas A..
2023.
« On the use of machine learning algorithms to predict the corrosion behavior of stainless steels in lactic acid ».
Metals, vol. 13, nº 8.
Thekkuden, Dinu Thomas, Mourad, Abdel-Hamid Ismail, Bouzid, Abdel-Hakim et Sherif, Muhammad M..
2023.
« Investigation of expansion percentages and groove inclusions on the performance of welded, expanded, welded-expanded tube-to-tubesheet joints ».
Journal of Materials Research and Technology, vol. 22.
pp. 2078-2092.
Zhao, Zijan, Bouzid, Abdel-Hakim et Zhu, Linbo.
2023.
« A method of evaluating the driving force and stresses during tube die expansion ».
Journal of Pressure Vessel Technology, vol. 145, nº 2.
Zrinej, Samiha, Laghzale, Nor Eddine et Bouzid, Hakim A..
2023.
« Analytical modeling of shrink-fitted FGM thick-walled cylinders ».
International Journal of Engineering Research in Africa, vol. 66.
pp. 61-74. 2022
Adjoul, Oussama, Benfriha, Khaled, Mahiddini, Brahim, Bouzid, Abdel-Hakim et Benabid, Yacine.
2022.
« New approach for the conjoint optimization of the design and manufacturing by integration of production costs ».
In Proceedings M2D2022 - 9th International Conference Mechanics and Materials in Design, Theory, Experiments and Applications in Engineering and Biomechanics (Funchal, Madeira, Portugal, June 26-30, 2022)
pp. 591-594.
INEGI-FEUP.
Aweimer, Ali Salah Omar et Bouzid, Abdel-Hakim.
2022.
« On the modeling of gas and liquid leaks through packed glands ».
Journal of Pressure Vessel Technology, vol. 144, nº 5.
Belhaou, Meriem, Laghzale, Nor Eddine et Bouzid, Hakim.
2022.
« Analysis of plastically deformed functionally graded pressurized thick cylinder ».
Arab Journal of Basic and Applied Sciences, vol. 29, nº 1.
pp. 372-381.
Belhaou, Meriem, Laghzale, Nor Eddine et Bouzid, Hakim.
2022.
« Residual stress in ceramic–metal tubes: Elastic–ideally plastic model analysis ».
International Journal of Engineering Trends and Technology, vol. 70, nº 9.
pp. 400-410. Bouzid, Hakim A.. 2022. « On the self-loosening of bolted joints ». Communication lors de la conférence : ASME Bolted Joint Reliability Symposium (Houston, TX, USA, Oct. 26-27, 2022). Bouzid, Hakim A., Bouzid, Sofiane et Ngo, Anh Dung. 2022. « On the tightness and strength of ASME section X FRP Flanges ». Communication lors de la conférence : ASME Bolted Joint Reliability Symposium (Houston, TX, USA, Oct. 26-27, 2022).
Bouzid, Sofiane, Bouzid, Abdel-Hakim et Ngô, Anh Dung.
2022.
« A study of the strength of ASME section X FRP flanges ».
In ASME Pressure Vessels & Piping Conference (Las Vegas, NV, USA, July 17-22, 2022)
American Society of Mechanical Engineers (ASME).
Bouzid, Sofiane, Bouzid, Abdel-Hakim et Ngô, Anh Dung.
2022.
« Stress analysis of ASME section X flanges using classical lamination theory ».
In 14th International Pipeline Conference (Calgary, AB, Canada, Sept. 26-30, 2022)
American Society of Mechanical Engineers (ASME).
Esouilhem, Mohamed, Bouzid, Abdel-Hakim et Nadeau, Sylvie.
2022.
« Pressure vessels and piping accident analysis and prevention: A case study in Canada ».
International Journal of Safety and Security Engineering, vol. 12, nº 1.
pp. 105-114. Hakimian, Soorosh, Bouzid, Hakim A. et Hof, Lucas. 2022. « A study on the influence of operational factors on the flange face corrosion using a novel experimental test bench ». Communication lors de la conférence : ASME Bolted Joint Reliability Symposium (Houston, TX, USA, Oct. 26-27, 2022).
Hakimian, Soroosh, Hof, Lucas A. et Bouzid, Hakim A..
2022.
« An improved fixture to quantify corrosion in bolted flanged gasketed joints subjected to service conditions ».
In ASME Pressure Vessels & Piping Conference (Las Vegas, Nevada, USA, July 17-22, 2022)
American Society of Mechanical Engineers (ASME).
Hakimian, Soroosh, Hof, Lucas et Bouzid, Hakim A..
2022.
« Investigation of corrosion in bolted flanged joints using a novel experimental setup ».
[Résumé d'une communication à une conférence]. ECS Meeting Abstracts, vol. MA2022-01, nº 16.
p. 990.
Mouâa, Amal, Laghzale, Nor Eddine et Bouzid, Abdel-Hakim.
2022.
« Creep analysis of plastically deformed shrink-fitted joints ».
Arabian Journal for Science and Engineering, vol. 47.
pp. 8199-8210. Rousseau, Rashique Iftekhar et Bouzid, Hakim A.. 2022. « On the stiffness of bolts and clamped members ». Communication lors de la conférence : ASME Bolted Joint Reliability Symposium (Houston, TX, USA, Oct. 26-27, 2022).
Thekkuden, Dinu Thomas, Mourad, Abdel-Hamid Ismail, Ramachandran, Tholkappiyan, Bouzid, Abdel-Hakim, Kumar, Ravi et Alzamly, Ahmed.
2022.
« Combined effect of tungsten inert gas welding and roller expansion processes on mechanical and metallurgical characteristics of heat exchanger tube-to-tubesheet joints ».
Journal of Materials Research and Technology-Jmr&T, vol. 21.
pp. 4724-4744.
Zhao, Zijian, Bouzid, Abdel-Hakim et Laghzale, Nor Eddine.
2022.
« Analysis of stresses and strains in stainless steel 316 L tubes subjected to die expansion ».
Journal of Pressure Vessel Technology, vol. 144, nº 5.
Zhu, Linbo, Pan, Hu, Yang, Yilong, Bouzid, Abdel-Hakim et Hong, Jun.
2022.
« Effect of the bending stiffness of bolted flange joints on the dynamics of aero-engine rotors ».
In ASME Pressure Vessels & Piping Conference (Las Vegas , NV, USA, July 17-22, 2022)
American Society of Mechanical Engineers (ASME).
Zhu, Linbo, Yang, Yilong, Huang, Hongwei, Bouzid, Abdel-Hakim et Hong, Jun.
2022.
« A novel method to predict the concentricity of aero-engine rotor considering the assembly process of bolted flange joints ».
In ASME Pressure Vessels & Piping Conference (Las Vegas , NV, USA, July 17-22, 2022)
American Society of Mechanical Engineers (ASME). 2021
Benfriha, Khaled, El-Zant, Chawki, Charrier, Quentin, Bouzid, Abdel-Hakim, Wardle, Peter, Belaidi, Idir, Loubère, Stéphane, Ghodsian, Nooshin et Aoussat, Améziane.
2021.
« Development of an advanced MES for the simulation and optimization of industry 4.0 process ».
International Journal for Simulation and Multidisciplinary Design Optimization, vol. 12.
Bouzid, Abdel-Hakim et Das, Shubhra Kanti.
2021.
« High temperature aged leakage relaxation screening tests on confined flexible graphite gaskets ».
In ASME 2021 Pressure Vessels & Piping Conference (En ligne, July 13-15, 2021)
American Society of Mechanical Engineers (ASME).
Bouzid, Abdel-Hakim, Touahri, Hacène et Benfriha, Khaled.
2021.
« Analytical solution of aluminum alloy plates with holes subjected to cold expansion with reverse yielding ».
Journal of Pressure Vessel Technology, vol. 143, nº 4.
Bouzid, Abdel-Hakim, Vafadar, Ali Khazraiyan et Ngô, Anh Dung.
2021.
« On the modeling of anisotropic fiber-reinforced polymer flange joints ».
Journal of Pressure Vessel Technology, vol. 143, nº 6.
Bouzid, Adbel-Hakim.
2021.
« A study on liquid leak rates in packing seals ».
Applied Sciences, vol. 11, nº 4.
Choulaei, Mohammad et Bouzid, Abdel-Hakim.
2021.
« Stress analysis of bolted flange joints with different shell connections ».
In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (En ligne, Nov. 01-05, 2021)
American Society of Mechanical Engineers (ASME).
Mouaa, Amal, Laghzale, Nor Eddine et Bouzid, Abdel-Hakim.
2021.
« Analytical modelling of interference fit joints with power law strain-hardening behavior ».
International Review on Modelling and Simulations, vol. 14, nº 1.
pp. 24-31.
Rousseau, Rashique Iftekhar, Bouzid, Abdel-Hakim et Zhao, Zijan.
2021.
« Accurate evaluation of bolt and clamped members stiffnesses of bolted joints ».
In ASME 2021 Pressure Vessels & Piping Conference (En ligne, July 13-15, 2021)
American Society of Mechanical Engineers (ASME).
Thekkuden, Dinu Thomas, Mourad, Abdel-Hamid Ismail et Bouzid, Abdel-Hakim.
2021.
« Failures and leak inspection techniques of tube-to-tubesheet joints: A review ».
Engineering Failure Analysis, vol. 130.
Zhao, Zijan et Bouzid, Abdel-Hakim.
2021.
« Stress analysis of tubes during die expansion process ».
In ASME 2021 Pressure Vessels & Piping Conference (En ligne, July 13-15, 2021)
American Society of Mechanical Engineers (ASME).
Zhu, Linbo, Bouzid, Abdel-Hakim et Hong, Jun.
2021.
« A method to reduce the number of assembly tightening passes in bolted flange joints ».
Journal of Manufacturing Science and Engineering, vol. 143, nº 12.
2020
Armentia, Mikel, Abasolo, Mikel, Coria, Ibai et Bouzid, Abdel-Hakim.
2020.
« On the use of a simplified slip limit equation to predict screw self-loosening of dental implants subjected to external cycling loading ».
Applied Sciences, vol. 10, nº 19.
Aweimer, Ali Salah Omar, Bouzid, Abdel-Hakim et Zhao, Zijian.
2020.
« Leakage estimate in nonuniformly compressed packing rings ».
Journal of Nuclear Engineering and Radiation Science, vol. 6, nº 2.
Benfriha, Khaled, Bouzid, Abdel-Hakim, Wardle, Peter, Deligant, Michael, Benabid, Yacine et Adjoul, Oussama.
2020.
« The influence of common business models on design processes life cycle and maintenance costs of products and systems ».
In Proceedings IRF2020: 7th International Conference Integrity-Reliability-Failure (Funchal, Portugal, Sept. 06-10, 2020)
pp. 683-692.
INEGI-FEUP.
Bouzid, A..
2020.
« Liquid leak rate predictions in packed stuffing boxes ».
In BHR Group – 25th International Conference on Fluid Sealing (Manchester, UK, March 4-5, 2020)
pp. 5-18.
Bouzid, Abdel-Hakim.
2020.
« Liquid leak rate predictions in packed stuffing boxes ».
In 25th International Conference on Fluid Sealing (Manchester, UK, Mar. 04-05, 2020)
pp. 5-18.
BHR Group Limited.
Esouilem, M., Bouzid, H. A. et Nadeau, S..
2020.
« Frequency failure causes analysis of pressure vessel and piping equipment: case study of the Alberta Petrochemical Industry ».
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, vol. 6, nº 4.
Kanthabhabha Jeya, Rahul Palaniappan, Zhao, Zijian et Bouzid, Abdel-Hakim.
2020.
« Creep-relaxation modeling of HDPE and polyvinyl chloride bolted flange joints ».
Journal of Pressure Vessel Technology, vol. 142, nº 5.
Thekkuden, Dinu Thomas, Mourad, Abdel-Hamid I. et Bouzid, Abdel-Hakim.
2020.
« Impact of grooves in hydraulically expanded tube-to-tubesheet joints ».
In ASME 2020 Pressure Vessels and Piping Conference (PVP) (En ligne, Aug. 03, 2020)
Coll. « American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP »
American Society of Mechanical Engineers (ASME).
Thekkuden, Dinu Thomas, Mourad, Abdel-Hamid I., Bouzid, Abdel-Hakim et Darabseh, Tariq.
2020.
« Impact of expansion pressure on wall thinning and contact pressure for hydraulically expanded tube-to-tubesheet joints: Numerical analysis ».
In Advances in Science and Engineering Technology International Conferences (ASET) : Advanced Materials, Design and Manufacturing (Dubai, United Arab Emirates, Feb. 04-06, 2020)
IEEE.
Vafadar, Ali Khazraiyan, Bouzid, Abdel-Hakim et Ngo, Anh Dung.
2020.
« An analytical anisotropic model to analyze fiber reinforced polymer bolted flange joints ».
In ASME 2020 Pressure Vessels and Piping Conference (PVP) (En ligne, Aug. 03, 2020)
Coll. « American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP »
American Society of Mechanical Engineers (ASME).
Vafadar, Ali Khazraiyan, Bouzid, Abdel-Hakim et Ngô, Anh Dung.
2020.
« Analytical modeling of FRP hubbed flanges ».
International Journal of Pressure Vessels and Piping, vol. 188.
Zhao, Zijian et Bouzid, Abdel-Hakim.
2020.
« Stress analysis of SS316l tube die expansion for high pressure gas coolers ».
In ASME 2020 Pressure Vessels and Piping Conference (PVP) (En ligne, Aug. 03, 2020)
Coll. « American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP »
American Society of Mechanical Engineers (ASME).
Zhu, Linbo, Hong, Jun, Shi, Zhenming et Bouzid, Abdel-Hakim.
2020.
« Numerical simulation of the assembly process of bolted flange joints used in rotating machinery ».
In ASME 2020 Pressure Vessels and Piping Conference (PVP) (En ligne, Aug. 3, 2020)
Coll. « American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP »
American Society of Mechanical Engineers (ASME). 2019
Aweimer, Ali Salah Omar et Bouzid, Abdel-Hakim.
2019.
« Evaluation of interfacial and permeation leaks in gaskets and compression packing ».
Journal of Nuclear Engineering and Radiation Science, vol. 5, nº 1.
Aweimer, Ali Salah Omar et Bouzid, Abdel-Hakim.
2019.
« Prediction of liquid and gas leak rates in packed stuffing boxes ».
In ASME 2019 Pressure Vessels and Piping Conference, PVP 2019 (San Antonio, TX, USA, July 14-19, 2019)
American Society of Mechanical Engineers (ASME).
Aweimer, Ali Salah Omar, Bouzid, Abdel-Hakim et Kazeminia, Mehdi.
2019.
« Predicting leak rate through valve stem packing in nuclear applications ».
Journal of Nuclear Engineering and Radiation Science, vol. 5, nº 1.
Bouzid, Abdel-Hakim et Aweimer, Ali Salah Omar.
2019.
« On the use of gas flow models to predict leak rates through sheet gasket materials ».
Journal of Pressure Vessel Technology, vol. 141, nº 5.
Bouzid, Abdel-Hakim et Pourreza, Mohammad.
2019.
« Analysis of residual stresses in the transition zone of tube-to-tubesheet joints ».
Journal of Pressure Vessel Technology, vol. 141, nº 4.
Bouzid, Abdel-Hakim et Touahri, Hacène.
2019.
« Analytical and numerical modelling of sheet plate cold expanded hole subjected to reverse yielding ».
In ASME 2019 International Mechanical Engineering Congress and Exposition (IMECE) (Salt Lake City, UT, USA, Nov. 11-14, 2019)
American Society of Mechanical Engineers (ASME).
Esouilem, Mohamed, Bouzid, Abdel-Hakim et Nadeau, Sylvie.
2019.
« Accident causes involving pressure vessels: A case study analysis with STAMP model ».
In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Dresden, Germany, Feb. 27-Mar. 1, 2019)
Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 65.
Dortmund : GfA-Press.
Esouilem, Mohamed, Bouzid, Abdel-Hakim et Nadeau, Sylvie.
2019.
« Safety and risk management analysis of accidents related to pressure vessels and piping in Alberta petrochemical industry from 2008 to 2017 ».
In Pressure Vessels and Piping Conference (PVP) 2019 (San Antonio, TX, USA, July 14-19, 2019)
ASME.
Fort, Valentin, Bouzid, Abdel-Hakim et Gratton, Michel.
2019.
« Analytical modeling of self-loosening of bolted joints subjected to transverse loading ».
Journal of Pressure Vessel Technology, vol. 141, nº 3.
Kanthabhabha Jeya, Rahul Palaniappan et Bouzid, Abdel-Hakim.
2019.
« Effect of thermal ratcheting on the mechanical properties of Teflon and fiber based gasket materials ».
Journal of Applied Polymer Science, vol. 136, nº 13.
Kanthabhabha Jeya, Rahul Palaniappan et Bouzid, Abdel-Hakim.
2019.
« Influence of thermal ratcheting on the creep and mechanical properties of high-density polyethylene ».
Journal of Engineering Materials and Technology, vol. 141, nº 4.
Legault, Xavier, Bouzid, Abdel-Hakim et Aweimer, Ali Salah Omar.
2019.
« Mechanical characterization of valve compression packing at high temperature ».
In ASME 2019 International Mechanical Engineering Congress and Exposition (IMECE) (Salt Lake City, UT, USA, Nov. 11-14, 2019)
American Society of Mechanical Engineers (ASME).
Mouâa, Amal, Laghzale, Nor Eddine et Bouzid, Abdel-Hakim.
2019.
« Elastic-plastic stresses in shrink fit with a solid shaft ».
In 14th Congress of Mechanics (CMM2019) (Rabat, Morocco, April 16-19, 2019)
Coll. « MATEC Web of Conferences », vol. 286.
EDP Sciences.
Zhu, Limbo, Bouzid, Abdel-Hakim et Hong, Jun.
2019.
« A novel methodology to optimize the tightening sequence in bolted flange joints ».
In ASME 2019 Pressure Vessels and Piping Conference, PVP 2019 (San Antonio, TX, USA, July 14-19, 2019)
American Society of Mechanical Engineers (ASME). 2018
Aweimer, Ali Salah Omar et Bouzid, Abdel-Hakim.
2018.
« Experimental investigation of interfacial and permeation leak rates in sheet gaskets and valve stem packing ».
In ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018)
ASME.
Aweimer, Ali Salah Omar, Bouzid, Abdel-Hakim et Zhao, Zijian.
2018.
« Prediction of leak rates through porous materials using analytical and numerical approaches ».
In ASME 2018 International Mechanical Engineering Congress and Exposition (Pittsburgh, PA, USA, Nov. 9-15, 2018)
ASME.
Bouzid, Abdel-Hakim et Pourreza, Mohammad.
2018.
« Analytical evaluation of residual stresses in the transition zone of expanded tube-to-tubesheet joints ».
In ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018)
ASME.
Bouzid, Abdel-Hakim et Zhu, L.inbo.
2018.
« A study of neighbouring tube expansion effect on the residual contact pressure of tube-to-tubesheet joints ».
International Journal of Pressure Vessels and Piping, vol. 165.
pp. 185-192.
Coria, I., Martin, I., Bouzid, A. H., Heras, I. et Abasolo, M..
2018.
« FEM superelement technique applied to oil and gas bolted flange connections ».
In 24th International Conference on Fluid Sealing, March 7, 2018 - March 8, 2018 (Manchester, United kingdom, March 7-8, 2018)
pp. 105-115.
United kingdom : BHR Group Limited.
Coria, Ibai, Martín, Iñigo Morales, Bouzid, Abel-Hakim, Heras, Iker et Abasolo, Mikel.
2018.
« Efficient assembly of bolted joints under external loads using numerical FEM ».
International Journal of Mechanical Sciences, vol. 142-143.
pp. 575-582.
Coria, Ibai, Martín, Iñigo, Bouzid, Hakim, Heras, Iker et Aguirrebeitia, Josu.
2018.
« Optimized bolt tightening sequences in bolted joints using superelement FE modeling technique ».
In 37th International Conference on Ocean, Offshore and Arctic Engineering (Madrid, Spain, June 17-22, 2018)
ASME.
Fort, Valentin, Bouzid, Abdel-Hakim et Gratton, Michel.
2018.
« Analytical modeling of self-loosening of bolted joints ».
In ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018)
ASME.
Kanthabhabha Jeya, Rahul Palaniappan et Bouzid, Abdel-Hakim.
2018.
« Influence of thermal ratcheting on the creep and mechanical properties of High Density Polyethylene (HDPE) ».
In ASME 2018 International Mechanical Engineering Congress and Exposition (Pittsburgh, PA, USA, Nov. 9-15, 2018)
ASME.
Kanthabhabha Jeya, Rahul et Bouzid, Abdel-Hakim.
2018.
« Compression creep and thermal ratcheting behavior of High Density Polyethylene (HDPE) ».
Polymers, vol. 10, nº 2.
Kazeminia, Mehdi et Bouzid, Abdel-Hakim.
2018.
« Leak prediction through porous compressed packing rings: A comparison study ».
International Journal of Pressure Vessels and Piping, vol. 166.
pp. 1-8.
Zhu, Linbo B., Bouzid, Abdel-Hakim, Hong, Jun et Zhang, Zaoxiao.
2018.
« Elastic interaction in bolted flange joints: An analytical model to predict and optimize bolt load ».
Journal of Pressure Vessel Technology, vol. 140, nº 4.
p. 10.
Zhu, Linbo, Bouzid, Abdel-Hakim et Hong, Jun.
2018.
« Analytical evaluation of elastic interaction in bolted flange joints ».
International Journal of Pressure Vessels and Piping, vol. 165.
pp. 176-184.
Zhu, Linbo, Hou, Yifei, Bouzid, Abdel-Hakim et Hong, Jun.
2018.
« On the design of contact member surface shape of bolted joints to minimize clamping load loss ».
In ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018)
ASME. 2017
Aweimer, Ali Salah Omar, Bouzid, Abdel-Hakim et Kazeminia, Mehdi.
2017.
« Leak rates of gasses through packing seals with different analytical approaches ».
In ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017)
American Society of Mechanical Engineers (ASME).
Bouzid, Abdel-Hakim et Aweimer, Ali Salah Omar.
2017.
« On the use of gas flow models to predict leak rates through sheet gasket materials ».
In ASME 2017 International Mechanical Engineering Congress and Exposition (Tampa Bay, Fl, USA, Nov. 03-09, 2017)
ASME.
Daoud, M., Chatelain, J. F. et Bouzid, A..
2017.
« Effect of rake angle-based Johnson-Cook material constants on the prediction of residual stresses and temperatures induced in Al2024-T3 machining ».
International Journal of Mechanical Sciences, vol. 122.
pp. 392-404.
Demers, Sébastien, Nadeau, Sylvie et Bouzid, Abdel-Hakim.
2017.
« Analytical evaluation of stresses and displacements of an intervertebral disc ».
Journal of Biomechanical Science and Engineering, vol. 12, nº 3.
Kanthabhabha Jeya, Palaniappan Rahul et Bouzid, Abdel-Hakim.
2017.
« Creep and thermal ratcheting characterization of polytetrafluoroethylene-based gasket materials ».
Advanced Materials proceeding, vol. 2, nº 10.
pp. 609-614.
Kanthabhabha Jeya, Palaniappan Rahul, Zhao, Zijan et Bouzid, Abdel-Hakim.
2017.
« HDPE and PVC creep and thermal ratcheting behavior under compression ».
In 21st International Conference on Composite Materials (Xi'an, China, Aug. 20-25, 2017)
ICCM21.
Kanthabhabha Jeya, Rahul Palaniappan et Bouzid, Abdel-Hakim.
2017.
« Characterisation of polytetrafluoroethylene and fiber based gaskets under creep and thermal ratcheting ».
In ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017)
American Society of Mechanical Engineers (ASME).
Kanthabhabha Jeya, Rahul Palaniappan et Bouzid, Abdel-Hakim.
2017.
« Creep and thermal ratcheting characterization of polytetrafluoroethylene-based gasket materials ».
In World Congress on Advances in Structural Engineering an Mechanics (ASEM 17), The 2017 International Conference onSteel and Composite Structures (ICSCS17) (Ilsan (Seoul), Korea, Aug. 28 - Sept. 01, 2017)
IASEM Conferences.
Kazeminia, Mehdi et Bouzid, Hakim.
2017.
« Evaluation of leakage through graphite-based compression packing rings ».
Journal of Pressure Vessel Technology, vol. 139, nº 1.
Vafadar, Ali K., Bouzid, Abdel-Hakim et Ngô, Anh Dung.
2017.
« Effect of material anisotropy on the structural integrity of composite bolted flanged joints ».
In ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017)
American Society of Mechanical Engineers (ASME).
Wyckaert, Pauline, Nadeau, Sylvie et Bouzid, Hakim.
2017.
« Analysis of risks of pressure vessels ».
In Gesellschaft für Arbeitswissenschaft : Soziotechnische Gestaltung des digitalen Wandels – kreativ, innovativ, sinnhaft (Zurich, Suisse, Fev. 15-17, 2017)
Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 63.
GFA Press.
Zhao, Zijian, Kanthabhabha Jeya, Rahul Palaniappan et Bouzid, Abdel-Hakim.
2017.
« Creep modeling of polyvinyl chloride bolted flange joints ».
In ASME 2017 International Mechanical Engineering Congress and Exposition (IMECE 2017) (Tampa, FL, USA, Nov. 03-09, 2017)
American Society of Mechanical Engineers.
Zhu, Linbo, Bouzid, Abdel-Hakim et Hong, Jun.
2017.
« Analytical modelling of elastic interaction in bolted flange gasketed joints ».
In ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017)
American Society of Mechanical Engineers (ASME).
Zhu, Linbo, Bouzid, Abdel-Hakim et Hong, Jun.
2017.
« Numerical and experimental study of elastic interaction in bolted flange joints ».
Journal of Pressure Vessel Technology, vol. 139, nº 2.
2016
Attoui, Hocine et Bouzid, Abdel-Hakim.
2016.
« On the equivalent mechanical properties of spiral wound gaskets ».
In ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016)
American Society of Mechanical Engineers (ASME).
Attoui, Hocine, Bouzid, Abdel-Hakim et Waterland, Jerry A..
2016.
« On the buckling of spiral wound gaskets ».
Journal of Pressure Vessel Technology, vol. 138, nº 4.
Bouzid, Abdel-Hakim et Kazeminia, Mehdi.
2016.
« Effect of reverse yielding on the residual contact pressure in tube-to-tubesheet joints ».
Journal of Pressure Vessel Technology, vol. 138, nº 6.
Bouzid, Abdel-Hakim et Laghzale, Nor-Eddine.
2016.
« Analytical modeling of tube-to-tubesheet joints subjected to plastic deformation and creep ».
Journal of Advanced Mechanical Design, Systems and Manufacturing, vol. 10, nº 4.
Bouzid, Abdel-Hakim, Mourad, Abdel-Hamid I. et El Domiaty, Aly.
2016.
« Influence of Bauschinger effect on the residual contact pressure of hydraulically expanded tube-to-tubesheet joints ».
International Journal of Pressure Vessels and Piping, vol. 146.
pp. 1-10.
Bouzid, Abdel-Hakim et Zhu, Linbo.
2016.
« Effect of adjacent tube expansion on the residual contact pressure of tube-to-tubesheet joints ».
In ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016)
American Society of Mechanical Engineers (ASME).
Demers, Sébastien, Bouzid, Abdel-Hakim et Nadeau, Sylvie.
2016.
« Effect of Sharpey's fibers on the stress distribution in the anulus fibrosus of an intervertebral disc subjected to compression ».
International Review on Modelling and Simulations, vol. 9, nº 6.
pp. 414-426.
Demers, Sébastien, Nadeau, Sylvie et Bouzid, Abdel-Hakim.
2016.
« Anisotropic multishell analytical modeling of an intervertebral disk subjected to axial compression ».
Journal of Biomechanical Engineering, vol. 138, nº 4.
Kazeminia, M. et Bouzid, A. H..
2016.
« Predicting leakage in packed stuffing boxes ».
In 23rd International Conference on Fluid Sealing 2016 (Manchester, UK, Mar. 2-3, 2016)
pp. 45-59.
BHR Group.
Kazeminia, Mehdi et Bouzid, Abdel-Hakim.
2016.
« Characterization and modeling of time-dependent behaviour of braided packing rings ».
In ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016)
American Society of Mechanical Engineers (ASME).
Laghzale, Noreddine et Bouzid, Hakim.
2016.
« Analytical modelling of elastic-plastic interference fit joints ».
International Review on Modelling and Simulations, vol. 9, nº 3.
pp. 191-199.
Zhu, Linbo, Bouzid, Abdel-Hakim et Hong, Jun.
2016.
« Numerical and experimental study of elastic interaction in bolted flange joints ».
In ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016)
American Society of Mechanical Engineers (ASME). 2015
Bouzid, A. H., Mourad, A. H. I. et El Domiaty, A..
2015.
« Impact of Bauschinger effect on the residual contact pressure of hydraulically expanded tube-to-tubesheet joints ».
[Article de conférence]. Procedia Engineering, vol. 130.
pp. 176-192.
Bouzid, Abdel-Hakim.
2015.
« Safety and reliability assessment of a miniature steam generator ».
In Proceedings 19th Triennial Congress of the International Ergonomics Association (Melbourne, Australia, Aug. 9-14, 2015)
International Ergonomics Association.
Bouzid, Abdel-Hakim et Kazeminia, Mehdi.
2015.
« Effect of reverse yielding on the residual contact stresses of tube-to-tubesheet joints subjected to hydraulic expansion ».
In ASME 2015 Pressure Vessels and Piping Conference (Boston, MA, USA, July 19-23, 2015)
Coll. « ASME Proceedings »
American Society of Mechanical Engineers.
Bouzid, H., Kenné, J. P., Nadeau, S. et Gowings, T..
2015.
« Chapter 2: Case study : Designing a log splitter ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 7-13. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Bouzid, H., Nadeau, S. et Kenné, J. P..
2015.
« Chapter 1: Case study : Gasket test rig ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 1-6. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Bouzid, H., Nadeau, S., Kenné, J. P. et Giner-Morency, C..
2015.
« Chapter 4: Case study : Designing a hydraulic car lift for small auto repair shops ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 26-36. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Bouzid, H., Nadeau, S., Kenné, J. P., Gowings, T. et Giner-Morency, C..
2015.
« Chapter 5: Case study : Designing a boom lift ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 37-55. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Bouzid, Hakim et Benabdallah, S..
2015.
« Characterization of PTFE-based gaskets at high temperature ».
Journal of Pressure Vessel Technology, vol. 137, nº 3.
Daoud, M., Chatelain, J. F. et Bouzid, A..
2015.
« Effect of rake angle on Johnson-Cook material constants and their impact on cutting process parameters of Al2024-T3 alloy machining simulation ».
International Journal of Advanced Manufacturing Technology, vol. 81, nº 9-12.
pp. 1987-1997.
Daoud, M., Jomaa, W., Chatelain, J. F. et Bouzid, A..
2015.
« A machining-based methodology to identify material constitutive law for finite element simulation ».
International Journal of Advanced Manufacturing Technology, vol. 77, nº 9-12.
pp. 2019-2033.
El Domiaty, Aly, Mourad, Abdel-Hamid et Bouzid, Abdel-Hakim.
2015.
« A proposed generalized model for forming limit diagram ».
In ASME 2015 Pressure Vessels and Piping Conference (Boston, MA, USA, July 19–23, 2015)
Coll. « ASME Proceedings »
American Society of Mechanical Engineers (ASME).
Kazeminia, Mehdi et Bouzid, Abdel-Hakim.
2015.
« On the modeling of gas flow through porous compression packings used in valve stuffing-boxes ».
In ICONE 2015 - 23rd International Conference on Nuclear Engineering: Nuclear Power - Reliable Global Energy (Makuhari, Chiba, Japan, May 17-21, 2015)
American Society of Mechanical Engineers (ASME).
Kazeminia, Mehdi et Bouzid, Abdel-Hakim.
2015.
« Prediction of gas flow in compressible and low permeability porous media ».
Journal of Fluid Science and Technology, vol. 10, nº 2.
Kazeminia, Mehdi et Bouzid, Abdel-Hakim.
2015.
« Prediction of leak rates in porous braided packing rings ».
In ASME 2015 Pressure Vessels and Piping Conference. (Boston, MA, USA, July 19-23, 2015)
Coll. « ASME Proceedings »
American Society of Mechanical Engineers.
Kazeminia, Mehdi et Bouzid, Hakim.
2015.
« Stress analysis of packed stuffing-boxes ».
Journal of Pressure Vessel Technology, vol. 137, nº 5.
Kenné, J. P., Bouzid, H., Nadeau, S. et Giner-Morency, C..
2015.
« Chapter 14: Case study : Designing a lift truck ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 122-128. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Kenné, J. P., Bouzid, H., Nadeau, S. et Giner-Morency, C..
2015.
« Chapter 6: Case study : Designing an aerial work platform vehicle ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 54-63. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Kenné, J. P., Nadeau, S., Bouzid, H. et Giner-Morency, C..
2015.
« Chapter 12: Case study: automated overhead crane ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 105-113. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Laghzale, N., Bouzid, A. et Elgharad, A..
2015.
« L’effet de l’interférence sur un assemblage fretté dans le domaine plastique ».
In 22ème Congrès Français de Mécanique (Lyon, France, 24-28 août 2015)
Coll. « M06 - Colloque Euro Méditerranée »
Association Française de Mécanique.
Nadeau, S., Bouzid, H., Kenné, J. P. et Giner-Morency, C..
2015.
« Chapter 13: Designing an airplane baggage belt loader ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 114-121. Newcastle upon Tyne, UK : Cambridge Scholars Publishing. 2014
Attoui, Hocine, Bouzid, Hakim et Waterland, Jerry A..
2014.
« Buckling and lateral pressures in spiral wound gaskets ».
In American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Anaheim, CA, USA, July 20-24, 2014)
American Society of Mechanical Engineers (ASME).
Bouzid, Abdel-Hakim.
2014.
« Comparative study of bolt spacing formulas used in bolted joint designs ».
International Journal of Pressure Vessels and Piping, vol. 120-121, nº 1.
pp. 47-54.
Bouzid, Adbel-Hakim.
2014.
« Failure analysis of an aluminium extension portable ladder ».
Materials Sciences and Applications, vol. 5, nº 9.
pp. 674-684.
Daoud, M., Jomaa, W., Chatelain, Jean-François, Bouzid, Abdel-Hakim et Songmene, Victor.
2014.
« Identification of material constitutive law constants using machining tests: A response surface methodology based approach ».
In 2014 International Conference on High Performance and Optimum Design of Structures and Materials, HPSM 2014 which incorporated the Seminar on Optimum Design in Engineering, OPTI 2014 (Ostend, Belgium, June 9-11, 2014)
Coll. « WIT Transactions on the Built Environment »
pp. 25-36.
WITPress.
Daoud, Monzer, Chatelain, Jean-François et Bouzid, Hakim.
2014.
« On the effect of Johnson Cook material constants to simulate Al2024-T3 machining using finite element modeling ».
In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014)
American Society of Mechanical Engineers (ASME).
Do, Tan Dan, Bouzid, Abdel-Hakim et Dao, Thien-My.
2014.
« Development of a new bolt spacing formula ».
Journal of Pressure Vessel Technology, vol. 136, nº 1.
Kazemina, Mehdi et Bouzid, Abdel-Hakim.
2014.
« Effect of tapered housing on the axial stress distribution in a stuffing box packing ».
International Journal of Advancements in Mechanical and Aeronautical Engineering, vol. 1, nº 3.
pp. 115-120.
Kazeminia, Mehdi et Bouzid, Abdel-Hakim.
2014.
« Analysis of stresses and strains in packed stuffing-boxes ».
In American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Anaheim, CA, USA, July 20-24, 2014)
American Society of Mechanical Engineers (ASME).
Kazeminia, Mehdi et Bouzid, Abdel-Hakim.
2014.
« Analytical and numerical evaluation of the axial stress distribution of two soft-packed stuffing-box configurations ».
In ASME Turbo Expo 2014: Turbine Technical Conference and Exposition (Düsseldorf, Germany, June 16-20, 2014)
V03BT25A005.
ASME.
Kazeminia, Mehdi et Bouzid, Abdel-Hakim.
2014.
« Effect of tapered housing on the axial stress distribution in a stuffing box pack ».
In International Conference on Advances in Mechanical and Automation Engineering-MAE 2014 (Rome, Italy, June 7-8, 2014)
pp. 20-25.
Santa Barbara, CA, USA : Institute of Research Engineers and Doctors. 2013
Veiga, José et Bouzid, Abdel-Hakim, éds.
2013.
« Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ».
New York, NY, USA : American Society of Mechanical Engineers.
Bouzid, Abdel-Hakim.
2013.
« Failure investigation of an aluminum extension portable ladder ».
In Chancen durch Arbeits-, Produkt- und Systemgestaltung - Zukunftsfähigkeit für Produktions- und Dienstleistungsunternehmen : 27.02. bis 01.03.2013, Krefeld (Krefeld, Germany, Feb. 27-Mar. 1, 2013)
Coll. « GfA-Frühjahrskongress; Gesellschaft für Arbeitswissenschaft e.V. »
pp. 295-300.
Dortmund, Germany : GfA-Press.
Bouzid, Abdel-Hakim et Benabdallah, Samir.
2013.
« On the hot blow-out characterization of PTFE-based gasket materials ».
In American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013)
New York, NY, USA : American Society of Mechanical Engineers.
Demers, S., Nadeau, Sylvie et Bouzid, Hakim.
2013.
« On the use of multishell theory to model herniated discs ».
In Dokumentation des 59. Arbeitswissenschaftlichen Kongresses Krefeld 27.02.-01.03.2013 (Krefeld, Germany, Feb. 27-Mar. 1, 2013)
pp. 371-374.
Dortmund, Germany : GfA-Press.
Demers, Sébastien, Bouzid, Abdel-Hakim et Nadeau, Sylvie.
2013.
« Développement d'un modèle analytique pour l'étude des contraintes d'un disque intervertebral soumis à une compression axiale ».
In CIRI 2013, 3ème Congrès international sur l'ingénierie des risques industriels (Reims, France, 3-5 juil. 2013)
Reims, France : Université de Reims Champagne-Ardenne.
Demers, Sébastien, Bouzid, Abdel-Hakim et Nadeau, Sylvie.
2013.
« On the modeling of an intervertebral disc using a novel large deformation multi-shell approach ».
Journal of Biomechanical Engineering, vol. 135, nº 5.
Demers, Sébastien, Nadeau, Sylvie et Bouzid, Hakim.
2013.
« Analytical anisotropic multi-shell model of a simplified intervertebral disc subjected to axial compression ».
In ASME 2013 Summer Bioengineering Conference (SBC) (Sunriver, OR, USA, June 26-29, 2013)
New York, NY, USA : American Society of Mechanical Engineers.
Grine, Lotfi et Bouzid, Abdel-Hakim.
2013.
« Analytical and experimental studies of liquid and gas leaks through micro and nano-porous gaskets ».
Materials Sciences and Applications, vol. 4, nº 8A.
pp. 32-44.
Grine, Lotfi et Bouzid, Abdel-Hakim.
2013.
« Prediction of leak rates through porous gaskets at high temperature ».
Journal of Pressure Vessel Technology, vol. 135, nº 2.
Nadeau, Sylvie, Hallé, Stéphane, Arteau, Jean, Ateme-Nguema, B., Badri, A., Belleau, Christian, Bouzid, Hakim, Debia, M., Emami-Mehrgani, B., Laville, Frédéric, Morency, François, Ngô, Anh Dung, Petit, Yvan et Voix, Jérémie. 2013. « Quand la vulgarisation scientifique reprend ses lettres de noblesse: le cas de l'EREST ». Affiche présentée lors de la conférence : Journée Découverte, École de technologie supérieure (Montréal, QC, Canada, 13 mars 2013).
Ould-Brahim, Nazim, Bouzid, Abdel-Hakim et Brailovski, Vladimir.
2013.
« On the use of shape memory alloy studs to recover load loss in bolted joints ».
Journal of Pressure Vessel Technology, vol. 135, nº 2.
2012
Adibi-Asl, Reza et Bouzid, Abdel-Hakim, éds.
2012.
« Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ».
New York, NY, USA : American Society of Mechanical Engineers.
Dan, Do Tan, Bouzid, Abdel-Hakim et Dao, Thien-My.
2012.
« On the development of a new bolt spacing formula ».
In ASME 2012 Pressure Vessels and Piping Conference, PVP 2012 (Toronto, ON, Canada, July 15-19, 2012)
pp. 131-138.
New York, N.Y., USA : American Society of Mechanical Engineers.
Demers, S., Bouzid, Hakim et Nadeau, Sylvie.
2012.
« Stress analysis of the intervertebral disc using a developed multi-shell model ».
In Twelfth Pan American Congress of Applied Mechanics (PACAM XII) (Trinidad, Spain, Jan. 2-6, 2012)
Demers, Sébastien, Bouzid, Abdel-Hakim et Nadeau, Sylvie.
2012.
« Analytical and finite element multi-shell modelling of an intervertebral disc ».
In ASME 2012 Pressure Vessels and Piping Conference, PVP 2012 (Toronto, ON, Canada, July 15-19, 2012)
pp. 25-36.
New York, N.Y., USA : American Society of Mechanical Engineers.
Diany, Mohammed et Bouzid, Abdel-Hakim.
2012.
« Creep constitutive law of packing materials based on relaxation tests ».
Journal of Tribology, vol. 134, nº 1.
Do, Tan Dan, Bouzid, Hakim et Dao, Thien-My.
2012.
« On the Use of Theory of Rings on Nonlinear Elastic Foundation to Study the Effect of Bolt Spacing in Bolted Flange Joints ».
Journal of Pressure Vessel Technology, vol. 134, nº 6.
Grine, Lotfi et Bouzid, Abdel-Hakim.
2012.
« Prediction of leak rates through porous gaskets at high temperature ».
In ASME 2012 Pressure Vessels and Piping Conference, PVP 2012 (Toronto, ON, Canada, July 15-19, 2012)
pp. 215-221.
New York, N.Y., USA : American Society of Mechanical Engineers.
Petrova, Natalia et Bouzid, Abdel-Hakim.
2012.
« Deflections of a multipass shell-and-tube heat exchanger bolted joint subjected to nonaxisymmetric thermal loading ».
Journal of Pressure Vessel Technology, vol. 134, nº 1.
2011
Waterland, Jerry et Bouzid, Abdel-Hakim et Shoji, Y. et Cory, J. F. Jr., éds.
2011.
« Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ».
New York, NY, USA : American Society of Mechanical Engineers.
Bouzid, A..
2011.
« ASTM F03 Research project on thermal expansion coefficient of PTFE gasketing materials under high loads ».
ASTM International. 39 p.
Bouzid, Hakim A..
2011.
« Étude de l'effrondrement d'une échelle à coulisse causant la mort d'un travailleur de l'Église Sacré-Coeur-de-Jésus ».
CSST. 43 p.
Bouzid, Hakim et Galai, Hichem.
2011.
« A new approach to model bolted flange joints with full face gaskets ».
Journal of Pressure Vessel Technology, vol. 133, nº 2.
Bouzid, Hakim et Ngo, Anh Dung.
2011.
« Mesures du coefficient de frottement du plancher en Terrazzo de l'Église Sacré-Coeur-de-Jésus ».
CSST. 10 p. Demers, S., Nadeau, Sylvie et Bouzid, Abdel-Hakim. 2011. « Une approche analytique pour la modélisation réaliste du mécanisme lésionnel de la hernie discale ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 10 mars 2011).
Demers, S., Nadeau, Sylvie et Bouzid, Abdel-Hakim.
2011.
« Étude analytique des zones critiques du disque intervertébral L5-S1 soumis à une compression quasi statique ».
[Résumé d'une communication à une conférence]. Travail et Santé, vol. 27, nº 4.
p. 23.
Diany, Mohammed et Bouzid, Abdel-Hakim.
2011.
« Creep constitutive law of packing materials based on relaxation tests ».
In ASME Pressure Vessels and Piping Conference (PVP) (Baltimore, Maryland, USA, July 17-21, 2011)
pp. 217-225.
ASME.
Diany, Mohammed et Bouzid, Hakim.
2011.
« An experimental-numerical procedure for stuffing box packing characterization and leak tests ».
Journal of Tribology, vol. 133, nº 1.
Do, Tan Dan, Bouzid, Hakim et Dao, Thien-My.
2011.
« Effect of bolt spacing on the circumferential distribution of the gasket contact stress in bolted flange joints ».
Journal of Pressure Vessel Technology, vol. 133, nº 4.
Grine, Lotfi et Bouzid, Hakim.
2011.
« Correlation of gaseous mass leak rates through micro- and nanoporous gaskets ».
Journal of Pressure Vessel Technology, vol. 133, nº 2.
Grine, Lotfi et Bouzid, Hakim.
2011.
« Liquid leak predictions in micro- and nanoporous gaskets ».
Journal of Pressure Vessel Technology, vol. 133, nº 5.
Ould-Brahim, N., Bouzid, Abdel-Hakim et Brailovski, Vladimir.
2011.
« Characteristics of a bolted joint with a shape memory alloy stud ».
In 5th International Conference on Computational Methods and Experiments in Materials Characterisation (MC) (Malta, July 13-15, 2011)
Coll. « WIT Transactions on Engineering Sciences », vol. 72.
pp. 339-347.
United Kingdom : WITPress.
Ould-Brahim, Nazim, Bouzid, Abdel-Hakim et Brailovski, Vladimir.
2011.
« Load recovery of a bolted joint with a shape memory alloy stud ».
In ASME Pressure Vessels and Piping Conference (PVP) (Baltimore, Maryland, USA, July 17-21, 2011)
pp. 321-328.
ASME. 2010
Bouzid, Abdel-Hakim et Martin, John, éds.
2010.
« Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ».
New York, NY, USA : American Society of Mechanical Engineers.
Bouzid, Hakim, Kenné, Jean-Pierre et Nadeau, Sylvie.
2010.
« Case study : designing a log splitter ».
In
Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics.
pp. 7-13. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Bouzid, Hakim, Nadeau, Sylvie et Kenné, Jean-Pierre.
2010.
« Case study : designing a boom lift ».
In
Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics.
pp. 36-53. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Bouzid, Hakim, Nadeau, Sylvie et Kenné, Jean-Pierre.
2010.
« Case study : designing a hydraulic car lift for small auto repair shops ».
In
Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics.
pp. 26-35. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Bouzid, Hakim, Nadeau, Sylvie et Kenné, Jean-Pierre.
2010.
« Case study : gasket test rig ».
In
Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics.
pp. 1-6. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Bouzid, Hakim et Nechache, Akli.
2010.
« The modelling of bolted flange joints used with disc springs and tube spacers to reduce relaxation ».
International Journal of Pressure Vessels and Piping, vol. 87, nº 12.
pp. 730-736.
Demers, Sébastien, Bouzid, Hakim A. et Nadeau, Sylvie.
2010.
« La hernie discale: mieux la comprendre pour mieux la prévenir ».
In Congrès AQHSST 2010 (Lévis, QC, Canada, 12-14 mai 2010)
Association québécoise pour l'hygiène, la santé et la sécurité du travail.
Diany, Mohammed et Bouzid, Abdel-Hakim.
2010.
« An experimental-numerical procedure for stuffing box packing characterization ».
In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference (Bellevue, WA, USA, July 18-22, 2010)
Coll. « ASME 2010 Pressure Vessels and Piping Conference »
pp. 183-189.
ASME. Diany, Mohammed et Bouzid, Hakim. 2010. « Caractérisation mécanique des garnitures de presse-étoupe ». Communication lors de la conférence : VI ième Journées d'Études Techniques 2010 (JET) (Marrakech, Maroc, 5-7 mai 2010).
Do, Tan Dan, Bouzid, Hakim et Dao, Thien-My.
2010.
« On the use of the theory of rings on non-linear elastic foundation to study the effect of bolt spacing in bolted flange joints ».
In ASME Pressure Vessel & Piping Conference (PVP) (Bellevue, Washington, July 18-22, 2010)
pp. 617-625.
New York, NY, USA : American Society of Mechanical Engineers.
Galai, Hichem et Bouzid, Hakim.
2010.
« Analytical modeling of flat face flanges with metal-to-metal contact beyond the bolt circle ».
Journal of Pressure Vessel Technology, vol. 132, nº 6.
0612071-0612078.
Grine, Lotfi et Bouzid, Abdel-Hakim.
2010.
« Liquid leak predictions in micro and nano-porous gaskets ».
In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference (Bellevue, WA, USA, July 18-22, 2010)
pp. 627-633.
ASME.
Kenné, Jean-Pierre, Bouzid, Hakim et Nadeau, Sylvie.
2010.
« Case study : designing a lift truck ».
In
Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics.
pp. 132-138. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Kenné, Jean-Pierre, Bouzid, Hakim et Nadeau, Sylvie.
2010.
« Case study : designing an aerial work platform vehicle ».
In
Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics.
pp. 54-60. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Kenné, Jean-Pierre, Nadeau, Sylvie et Bouzid, Hakim.
2010.
« Case study : automated overhead crane ».
In
Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics.
Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Laghzale, Nor Eddine et Bouzid, Hakim.
2010.
« Effect of creep on the residual stresses in tube-to-tubesheet joints ».
Journal of Pressure Vessel Technology, vol. 132, nº 6.
0612101-0612106. Laghzale, Nor Eddine, Bouzid, Hakim et El Gherrad, A.. 2010. « Étude des effets de l'écrouissage et du fluage sur la pression résiduelle de contact dans les joints tubes-plaques tubulaires ». Communication lors de la conférence : VI ième Journées d'Études Techniques 2010 (JET) (Marrakech, Maroc, 5-7 mai 2010).
Lee, Walter, Bouzid, Abdel-Hakim et Huang, James.
2010.
« Qualification of gasket performance for vacuum applications ».
In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference (Bellevue, WA, USA, July 18-22, 2010)
pp. 307-316.
ASME.
Nadeau, Sylvie, Bouzid, Hakim et Kenné, Jean-Pierre.
2010.
« Case study : designing an airplane baggage belt loader ».
In
Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics.
pp. 125-131. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Petrova, Natalia et Bouzid, Abdel-Hakim.
2010.
« Flanged joints of multi-pass shell-and-tube heat exchangers subjected to non-axisymmetric thermal loading ».
In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference (Bellevue, WA, USA, July 18-22, 2010)
pp. 221-230.
New York, NY, USA : American Society of Mechanical Engineers. 2009
Bouzid, Hakim et Martin, J., éds.
2009.
« Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ».
New York, NY, USA : American Society of Mechanical Engineers.
Bouzid, Hakim.
2009.
« On the effect of external bending loads in bolted flange joints ».
Journal of Pressure Vessel Technology, vol. 131, nº 2.
Bouzid, Hakim et Laghzale, Nor Eddine. 2009. « Analytical modeling of tube-to-tubesheet joints sujected to plasticity and creep ». Affiche présentée lors de la conférence : 6th CNS International Steam Generator Conference (Toronto, Canada, Nov. 8-11, 2009). Demers, Sébastien, Bouzid, Hakim et Nadeau, Sylvie. 2009. « Étude du mécanisme lésionnel de la hernie discale : une approche analystique de modélisation de la hernie discale ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 10 déc. 2009).
Diany, Mohammed et Bouzid, Hakim.
2009.
« Analytical evaluation of stresses and displacements of stuffing-box packing based on a flexibility analysis ».
Tribology International, vol. 42, nº 6.
pp. 980-986. Diany, Mohammed et Bouzid, Hakim. 2009. « Modélisation numérique des garnitures de valves ». Communication lors de la conférence : Colloque International sur les Méthodes Mathématiques et Numériques en Mécaniques des Fluides - CIMMNMF (Errachidia, Maroc, 28-29 avril 2009).
Diany, Mohammed et Bouzid, Hakim.
2009.
« Short term relaxation modeling of valve stem packings ».
Journal of Tribology, vol. 131, nº 3.
Galai, Hichem et Bouzid, Hakim.
2009.
« Analytical modeling of flat face flanges with metal-to-metal contact beyond the bolt circle ».
In 2009 ASME Pressure Vessels and Piping Conference (PVP) (Prague, Czech republic, July 26-30, 2009)
Coll. « American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP »
pp. 315-323.
New-York, NY, USA : American Society of Mechanical Engineers.
Grine, Lotfi et Bouzid, Hakim.
2009.
« Correlation of gaseous mass leak rates through micro and nano-porous gaskets ».
In 2009 ASME Pressure Vessels and Piping Conference (PVP) (Prague, Czech republic, July 26-30, 2009)
Coll. « American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP »
pp. 41-47.
New-York, NY, USA : American Society of Mechanical Engineers.
Laghzale, Nor Eddine et Bouzid, Hakim.
2009.
« Analytical modeling of hydraulically expanded tube-to-tubesheet joints ».
Journal of Pressure Vessel Technology, vol. 131, nº 1.
Laghzale, Nor Eddine et Bouzid, Hakim.
2009.
« Theoretical analysis of hydraulically expanded tube-to-tubesheet joints with linear strain hardening material behavior ».
Journal of Pressure Vessel Technology, vol. 131, nº 6.
Lee, Walter, Bouzid, Hakim et Huang, James.
2009.
« Factors affecting high temperature relaxation behaviors of expanded PTFE gaskets ».
In 2009 ASME Pressure Vessels and Piping Conference (PVP) (Prague, Czech republic, July 26- 30, 2009)
Coll. « American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP »
pp. 223-234.
New-York, NY, USA : American Society of Mechanical Engineers. Lee, Walter, Bouzid, Hakim et Huang, James. 2009. « Qualification of gasket performance for vacuum applications ». Communication lors de la conférence : VSP Technologies "Sealing Technology Exposition" (Prince George, VA, USA, Dec. 2, 2009).
Waterland III, A. Fitzgerald et Bouzid, Hakim.
2009.
« Analysis of the compression behavior of spiral wound gaskets ».
In 2009 ASME Pressure Vessels and Piping Conference (PVP) (Prague, Czech republic, July 26-30, 2009)
Coll. « American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP »
pp. 89-97.
New-York, NY, USA : American Society of Mechanical Engineers. 2008
Bouzid, Abdel-Hakim, éd.
2008.
« Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ».
New York, NY, USA : American Society of Mechanical Engineers. Bouzid, Hakim et Laghzale, N.. 2008. « An analytical solution of hydraulicaly expanded tube-to-tubesheet joints with linear strain hardening material behaviour ». Communication lors de la conférence : Third International Conference on Engineering Failure Analysis (ICEFA-III) (Barcelona, Spain, July 13-16, 2008).
Bouzid, Hakim et Nechache, Akli.
2008.
« On the use of Belleville washers to reduce relaxation in bolted flange joints ».
In ASME Pressure Vessels and Piping Conference (PVP) (Chicago, IL, USA, Jul. 27-31, 2008)
pp. 3-10.
New York, NY, USA : American Society of Mechanical Engineers.
Laghzale, Nor Eddine et Bouzid, Abdel-Hakim.
2008.
« An analytical solution of hydraulically expanded tube-to-tubesheet joints with linear strain hardening material behaviour ».
In Proceedings of the ASME Pressure Vessels and Piping Conference (Chicago, IL, USA, July 27-31, 2008)
pp. 63-72.
American Society of Mechanical Engineers. Lee, W., Bouzid, Hakim et Huang, J.. 2008. « Effect of HOBT test parameters on expanded PTFE gaskets ». Communication lors de la conférence : ASME Pressure Vessels and Piping Conference (PVP) (Chicago, IL, USA, July 27-31, 2008).
Nadeau, Sylvie, Bouzid, Hakim et Prud’homme, David.
2008.
« Étude du mécanisme lésionnel de la hernie discale : modélisation du comportement élastique non linéaire ».
Revue Internationale sur l’Ingénierie des Risques Industriels, vol. 1, nº 1.
pp. 46-64.
Nechache, Akli et Bouzid, Abdel-Hakim.
2008.
« On the use of plate theory to evaluate the load relaxation in bolted flanged joints subjected to creep ».
International Journal of Pressure Vessels and Piping, vol. 85, nº 7.
pp. 486-497.
Nechache, Akli et Bouzid, Abdel-Hakim.
2008.
« The effect of cylinder and hub creep on the load relaxation in bolted flanged joints ».
Journal of Pressure Vessel Technology, vol. 130, nº 3.
031211 (9 p.).
Tan Dan, D., Bouzid, Hakim et Dao, Thien-My.
2008.
« Effect of bolt spacing on the circumferential distribution of gasket contact stress in bolted flange joints ».
In 16th International Conference on Nuclear Engineering (ICONE) (Orlando, FL, USA, May 11-15, 2008)
pp. 207-216.
New York, NY, USA : American Society of Mechanical Engineers. 2007
Bouzid, Abdel-Hakim et Martin, John, éds.
2007.
« Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ».
New York, NY, USA : American Society of Mechanical Engineers.
Bouzid, Abdel-Hakim, Birembaut, Yves et Lejeune, Hubert.
2007.
« On the effect of external bending loads in bolted flange joints ».
In ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007)
pp. 115-123.
New York, NY, USA : American Society of Mechanical Engineers.
Diany, Mohammed et Bouzid, Hakim.
2007.
« Short term relaxation of stuffing box packings ».
In ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007)
pp. 159-164.
New York, NY, USA : American Society of Mechanical Engineers.
Laghzale, Nor Eddine et Bouzid, Hakim.
2007.
« Analytical modeling of hydraulically expanded tube-to-tubesheet joints ».
In ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007)
pp. 233-242.
New York, NY, USA : American Society of Mechanical Engineers.
Nadeau, Sylvie, Bouzid, Hakim et Prud'Homme, D..
2007.
« Étude du mécanisme lésionnel de la hernie discale : modélisation du comportement élastique non linéaire ».
In Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montréal, QC, Canada, 17-19 déc. 2007)
Montréal : École de technologie supérieure.
Nadeau, Sylvie, Hallé, Stéphane, Déry, S., Doucet, P., Gilbert, R., Gratton, L., Ngô, Anh Dung, Arteau, Jean, Bouzid, Hakim, Brousseau, J., Dessureault, J., Gauthier, F., Laville, Frédéric, Le-Huy, P., Marchand, Françoise, Petit, Yvan, Rodier, D. et Thomas, Marc.
2007.
« Vers l'intégration de connaissances en santé et sécurité du travail en formation universitaire (génie mécanique) - une collaboration unique ».
In 24e Congrès de l’Association Internationale de Pédagogie Universitaire (AIPU) (Montréal, QC, Canada, 16-18 mai 2007)
pp. 96-100.
Association Internationale de Pédagogie Universitaire (AIPU).
Nechache, Akli et Bouzid, Abdel-Hakim.
2007.
« Creep analysis of bolted flange joints ».
International Journal of Pressure Vessels and Piping, vol. 84, nº 3.
pp. 185-194.
Ngô, Anh Dung, Hallé, Stéphane, Nadeau, Sylvie, Déry, P., Doucet, P. , Gilbert, R. , Gratton, L., Arteau, Jean, Bouzid, Hakim, Brousseau, J. , Dessureault, P. , Gauthier, F. , Laville, Frédéric, Le Huy, P. , Marchand, Françoise , Petit, Yvan , Rodier, D. et Thomas, Marc.
2007.
« Le défi de l'intégration des connaissances en santé et en sécurité du travail - génie mécanique ».
Travail et Santé, vol. 23, nº 4.
pp. 36-39. 2006
Bouzid, A. et Kockelmann, H. et Sawa, T., éds.
2006.
« Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ».
New York, NY, USA : American Society of Mechanical Engineers.
Bouzid, A., Diany, M. et Derenne, M..
2006.
« Determination of gasket effective width for the ASME proposed flange design rules ».
Welding Research Council Bulletin, nº 515.
pp. 1-43.
Diany, Mohammed et Bouzid, Hakim.
2006.
« Evaluation of contact stress in stuffing box packings ».
In ASME Pressure Vessels and Piping Conference (PVP) (Vancouver, Canada, Jul. 23-27, 2006)
pp. 87-92.
New York, NY, USA : American Society of Mechanical Engineers.
Sakr, O., Bouzid, A. et Derenne, M..
2006.
« 3D-finite element modelling of bolted flanged joints subjected to external bending loads ».
Welding Research Council Bulletin, nº 516.
pp. 1-56.
Sakr, O., Bouzid, A. et Derenne, M..
2006.
« Development of a transducer for measuring gasket contact stress in bolted flanged joints ».
Welding Research Council Bulletin, nº 516.
pp. 57-85. 2005
Bouzid, A. et Morandin, G. D., éds.
2005.
« Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ».
New York, NY, USA : American Society of Mechanical Engineers.
Bouzid, Hakim.
2005.
« Bolted flange joints with full face gaskets : an analytical approach based on flexibility ».
In ASME Pressure Vessels and Piping Conference (PVP) (Denver, CO, USA, Jul. 17-21, 2005)
pp. 29-35.
New York, NY, USA : American Society of Mechanical Engineers. Bouzid, Hakim. 2005. « Bolted flanged joint flexibility analysis ». Communication lors de la conférence : PVRC Conference on Best Practices for Flange Assembly and Maintenance (PVRC-WRC) (New Orleans, LA, USA, May 23-25, 2005).
Bouzid, Hakim et Nechache, A..
2005.
« An analytical solution for evaluating gasket stress change in bolted flange connections subjected to high temperature loading ».
Journal of Pressure Vessel Technology, vol. 127, nº 4.
pp. 414-421.
Bouzid, Hakim et Nechache, A..
2005.
« Thermally induced deflections in bolted flanged connections ».
Journal of Pressure Vessel Technology, vol. 127, nº 4.
pp. 394-401.
Champliaud, Henri et Bouzid, Abdel-Hakim.
2005.
« Computation of unloading stiffness of nonlinear gaskets using dual kriging interpolation ».
In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, Canada, Aug. 1-4, 2005)
pp. 127-138.
Montréal, Qué., Canada : École de technologie supérieure.
Diany, M., Bouzid, Hakim et Derenne, M..
2005.
« On the validity and limits of the gasket effective width concept ».
In ASME Pressure Vessels and Piping Conference (PVP) (Denver, CO, USA, Jul. 17-21, 2005)
pp. 15-20.
New York, NY, USA : American Society of Mechanical Engineers.
Marchand, Luc, Derenne, Michel, Sakr, Olivier et Bouzid, Hakim.
2005.
« Long term pressurized graphite gasketed joint tests ».
Welding Research Council Bulletin, nº 507.
pp. 1-14.
Nechache, A. et Bouzid, Hakim.
2005.
« Creep effect of attached structures on bolted flanged joint relaxation ».
In ASME Pressure Vessels and Piping Conference (PVP) (Denver, CO, USA, Jul. 17-21, 2005)
pp. 207-215.
New York, NY, USA : American Society of Mechanical Engineers. 2004
Bouzid, Abdel-Hakim, éd.
2004.
« Proceedings of the ASME Pressure Vessels and Piping Conference : Volume Analysis of bolted joints ».
New York, NY, USA : American Society of Mechanical Engineers.
Bouzid, Abdel-Hakim et Champliaud, Henri.
2004.
« Contact stress evaluation of nonlinear gaskets using dual kriging interpolation ».
Journal of Pressure Vessel Technology, vol. 126, nº 4.
pp. 445-450.
Bouzid, Hakim A., Diany, Mohammed et Derenne, Michel.
2004.
« Determination of gasket effective width based on leakage ».
In ASME/JSME Pressure Vessels and Piping Conference (PVP) (San Diego, CA, USA, Jul. 25-29, 2004)
pp. 105-111.
New York, NY, USA : American Society of Mechanical Engineers.
Bouzid, Hakim A. et Nechache, Akli.
2004.
« Creep modeling in bolted flange joints ».
In 2004 ASME/JSME Pressure Vessels and Piping Conference (PVP) (San Diego, CA, USA, Jul. 25-29, 2004)
pp. 49-56.
USA : American Society of Mechanical Engineers.
Bouzid, Hakim et Derenne, Michel.
2004.
« Effect of gasket width and gasket diameter on tightness performance, gasket constants and emissions : an exploratory experimental investigation ».
Welding Research Council Bulletin, nº 496.
pp. 24-38.
Bouzid, Hakim, Derenne, Michel et Birembaut, Yves.
2004.
« Effect of gasket width on tightness performance gasket constants and emissions ».
Welding Research Council Bulletin, nº 484.
pp. 39-50.
Bouzid, Hakim, Derenne, Michel et El-Rich, Marwan.
2004.
« Effect of flange rotation and gasket width on leakage behavior of bolted flanged joints ».
Welding Research Council Bulletin, nº 496.
pp. 1-23.
Galai, Hichem et Bouzid, Hakim.
2004.
« Analytical modeling of bolted flange joints with full face gaskets ».
In International Pipeline Conference (Calgary, AB, Canada, Oct. 4-8, 2004)
pp. 2731-2737.
Calgary, AB, Canada : American Society of Mechanical Engineers.
Nechache, Akli, Bouzid, Hakim A. et Le, Van Ngan.
2004.
« Analytical modeling of a bolted flange joint subjected to creep relaxation ».
In 12th International Conference on Nuclear Engineering (ICONE) (Arlington, VA, USA, Apr. 25-29, 2004)
pp. 705-712.
New York, NY, USA : American Society of Mechanical Engineers.
Prud'homme, D., Nadeau, Sylvie et Bouzid, Hakim.
2004.
« Étude de mécanisme lésionnel de la hernie discale : modélisation du comportement viscoélastique ».
In 72e Congrès de l'ACFAS (Montréal, QC, Canada, 10-12 mai 2004)
2003
Bouzid, Hakim A. et Sawa, Toshiyuki, éds.
2003.
« Proceedings of the ASME Pressure Vessels and Piping Conference : Volume Analysis of bolted joints ».
Coll. « PVP (Series) », vol. 457.
New-York, NY, USA : American Society of Mechanical Engineers. 149 p.
Bouzid, Hakim A. et Beghoul, Hichem.
2003.
« The design of flanges based on flexibility and tightness ».
In ASME Pressure Vessels and Piping Conference (PVP) (Cleveland, OH, USA, Jul. 20-24, 2003)
pp. 31-38.
New York, NY, USA : American Society of Mechanical Engineers.
Bouzid, Hakim A. et Champliaud, Henri.
2003.
« On the use of dual kriging interpolation for the evaluation of the gasket stress distribution in bolted joints ».
In Pressure Vessels and Piping Conference (PVP) (Cleveland, OH, USA, Jul. 20-24, 2003)
pp. 77-83.
USA : American Society of Mechanical Engineers.
Bouzid, Hakim et Beghoul, Hichem.
2003.
« A new proposed method for the design of bolted joints based on flexibility and tightness ».
In 10th International Conference on Pressure Vessel Technology (ICPVT-10) (Vienna, Austria, July 7-10, 2003)
pp. 293-301.
Österreichische Gesellschaft für Schweißtechnik.
Bouzid, Hakim, Derenne, Michel et Marchand, Luc.
2003.
« Long duration mechanical performance of PTFE based gasket materials ».
Welding Research Council Bulletin, nº 484.
pp. 12-22.
Bouzid, Hakim et Lê, Van Ngan.
2003.
« Développement de deux séances de laboratoire pour les cours MEC728 et SYS865 ».
In Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2001-2002 : Actes (Montréal, QC, Canada, 11 juin 2002)
pp. 7-12.
Duchaine, Caroline, Veillette, Marc, Cormier, Yvon, Lavoie, Jacques, Desjardins, France et Bouzid, Hakim.
2003.
« Analyse microbiologique des fluides de coupe de métaux : étude exploratoire ».
Coll. « Études et Recherches », vol. R-341.
Montréal, Canada : IRSST. 33 p. Morin, O., Champliaud, Henri, Duchaine, F. et Bouzid, Hakim. 2003. « Krigeage du comportement des joints d'étanchéité au chargement et au déchargement ». Communication lors de la conférence : 71e Congrès de l'ACFAS (Rimouski, QC, Canada, 19-23 mai 2003).
Nadeau, S., Bouzid, H. A. et Kenné, J. P..
2003.
« Conception d'un convoyeur à bagages pour le chargement/déchargement des avions ».
In Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2002-2003 : Actes (Montréal, QC, Canada, 25 avril 2003)
pp. 67-72.
École de technologie supérieure.
Nadeau, Sylvie, Bouzid, Hakim et Kenné, Jean-Pierre.
2003.
« L'enseignement par la méthode des cas en génie mécanique ».
In Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2001-2002 : Actes (Montréal, QC, Canada, 11 juin 2002)
pp. 13-16.
École de technologie supérieure.
Nechache, Akli et Bouzid, Hakim A..
2003.
« The determination of load changes in bolted gasketed joints subjected to elevated temperature ».
In ASME Pressure Vessels and Piping Conference (PVP) (Cleveland, OH, USA, Jul. 20-24, 2003)
pp. 139-148.
New York, NY, USA : American Society of Mechanical Engineers.
Sakar, O., Bouzid, A., Derenne, M., Marchand, L. et Muzzo, U..
2003.
« Gasketed joint emissions and leakage : WRC Bulletin 484 - August 2003 ».
Welding Research Council, Progress Reports, vol. 58, nº 11-12.
Sakr, Olivier, Bouzid, Hakim, Derenne, Michel et Marchand, Luc.
2003.
« Correlation between PPMV and mass leakage rate of gasketing products ».
Welding Research Council Bulletin, nº 484.
pp. 1-11. 2002
Birembaut, Yves, Ledauphin, Thierry, Masi, Vincent, Bouzid, Hakim, Derenne, Michel et Martelli-Garon, Pascal.
2002.
« Part 1: The effects of bending moments on bolted gasketed joints ».
Welding Research Council Bulletin, nº 473.
pp. 1-17.
Bouzid, Abdel-Hakim et Derenne, Michel.
2002.
« Analytical modeling of the contact stress with nonlinear gaskets ».
Journal of Pressure Vessel Technology, vol. 124, nº 1.
pp. 47-53.
Bouzid, Abdel-Hakim, Nechache, Akli et Brown, Warren.
2002.
« The effect of steady state thermal loading on the deflections of a flanged joint with a cover plate ».
Welding Research Council, Progress Reports, vol. 57, nº 7-8.
pp. 99-108.
Bouzid, Hakim A., Nechache, Akli et Brown, Warren.
2002.
« The effect of steady state thermal loading on the deflections of a flanged joint with a cover plate ».
In ASME Pressure Vessels and Piping Conference (PVP) (Vancouver, Canada, Aug. 5-9, 2002)
pp. 153-162.
New York, NY, USA : American Society of Mechanical Engineers.
Brown, Warren, Derenne, Michel et Bouzid, Abdel-Hakim.
2002.
« Determination of gasket stress levels during thermal transients ».
In 2002 ASME Prssure Vessels and Piping Conference : Analysis of Bolted Joints (Vancouver, BC, Canada, Aug. 5-9, 2002)
Coll. « PVP (Series) », vol. 433.
pp. 21-28.
Vancouver, BC, Canada : American Society of Mechanical Engineers.
Nechache, Akli et Bouzid, Hakim A..
2002.
« The redistribution of load in bolted gasketed joints subjected to steady state thermal loading ».
In 10th International Conference on Nuclear Engineering (ICONE) (Arlington, VA, USA, Apr. 14-18, 2002)
pp. 743-751.
New York, NY, USA : American Society of Mechanical Engineers. 2001
Bouzid, Abdel-Hakim, Derenne, Michel, Marchand, L. et Payne, J. R..
2001.
« Service temperature characterization of polytetrafluoroethylene-based gaskets ».
Journal of Testing and Evaluation, vol. 29, nº 5.
pp. 442-452.
Brown, W., Derenne, M. et Bouzid, A..
2001.
« The effect of thermal loading of pressure vessel joints ».
In Journées d'Etudes Européennes sur les Equipements sous Pression: Paris, 23, 24, 25 octobre 2001, Hôtel Sofitel, Forum Rive Gauche = European Symposium on Pressure Equipment - ESOPE 2001 (Paris, France, Oct. 23-25, 2001)
pp. 416-425.
Paris, France : Association Française des Ingénieurs en Appareils à Pression.
Brown, Warren, Derenne, Michel et Bouzid, Hakim A..
2001.
« Determination of gasket stress levels during high temperature flange operation ».
In ASME Pressure Vessels and Piping Conference (PVP) (Atlanta, GA, USA, Jul. 22-26, 2001)
pp. 361-368.
New York, NY, USA : American Society of Mechanical Engineers.
Brown, Warren, Derenne, Michel et Bouzid, Hakim A..
2001.
« Determination of the mechanical and thermal properties of selected gasket types ».
In ASME Pressure Vessels and Piping Conference (PVP) (Atlanta, GA, USA, Jul. 22-26, 2001)
pp. 35-43.
New York, NY, USA : American Society of Mechanical Engineers. 2000Bouzid, A. et Payne, J. R.. 2000. « FEM Studies at TTRL and ÉTS ». Communication lors de la conférence : ASTM Committee F03 Gaskets Meeting : Technology Session (Orlando, FL, USA, Oct. 24-26, 2000).
Bouzid, Abdel-Hakim, Derenne, M., Marchand, L. et Payne, J. R..
2000.
« Preventing PTFE Gasket Blow-Out ».
In Proceedings of the Ninth International Conference on Pressure Vessel Technology ICPVT-9 (Sydney, Australia
pp. 393-401.
Brown, W., Derenne, Michel et Bouzid, Abdel-Hakim.
2000.
« Determination of the Steady State Operating Temperature of Pressure Vessel Flange Components: Part 2 - Simplified Methods ».
In Proceedings of the 2000 ASME/PVP Conference (Seattle, WA, USA
pp. 105-113.
Brown, Warren, Derenne, Michel et Bouzid, Abdel-Hakim.
2000.
« Determination of the steady state operating temperature of pressure vessel flange components: part 1 - analytic methods ».
In Proceedings of the 2000 ASME/PVP Conference (Seattle, WA, USA, July 23-27, 2000)
Coll. « PVP (Series) », vol. 405.
pp. 95-104.
American Society of Mechanical Engineers.
Derenne, M., Marchand, L. , Bouzid, Abdel-Hakim et Payne, J. R. .
2000.
« Long Term Elevated Temperature Performance of Reinforced Flexible Graphite Sheet Gaskets ».
In Proceedings of the Ninth International Conference on Pressure Vessel Technology ICPVT-9 (Sydney, Australia
pp. 229-247.
Mammeri, N., Piron, d. L., Bouzid, Hakim A., Derenne, Michel, Marchand, Luc et Birembaut, Yves.
2000.
« Corrosion quantification test for flanges with graphite-based gaskets ».
Materials Performance, vol. 39, nº 4.
pp. 64-69.
Sakr, O., Bouzid, Abdel-Hakim, Derenne, M., Marchand, L. et Payne, J. R..
2000.
« Correlation Between PPMV and Mass Leakage Rate of Gasketing Products ».
In Proceedings of the Ninth International Conference on Pressure Vessel Technology ICPVT-9 (Sydney, Australia
pp. 369-381.
1999
Bouzid, A. H. et Derenne, M..
1999.
« Simple method for analyzing the contact stress in bolted flange joints with non-linear gaskets ».
In Proceedings of the 1999 ASME/PVP Conference (Boston, MA, USA, Aug. 01-05, 1999)
Coll. « Pressure Vessels and Piping Conference PVP », vol. 382.
pp. 103-111.
American Society of Mechanical Engineers.
El-Rich, M., Bouzid, A. et Derenne, M..
1999.
« On the effective gasket width and the contact stress in bolted gasketed joints ».
In Proceedings of the 1st International Conference on Sealing Technology and Plant Leakage Reduction (ICSTPLR99) (Charlotte, NC, USA, Nov. 15-19, 1999)
24.21-24.17.
Hollinger, G .L., Hsu, K. H., Payne, J. R., Derenne, M., Bouzid, A., Marchand, L., Mueller, R., Waterland, J. et Winter, R.. 1999. « A look at today’s gasket evaluation technology ». Communication lors de la conférence : 1st International Conference on Sealing Technology and Plant Leakage Reduction (ICSTPLRL-99) (Charlotte, NC, USA, Nov., 1999).
Mameri, N., Bouzid, A., Derenne, M., Marchand, L. et Piron, D. L..
1999.
« Quantification of corrosion in bolted gasketed joints ».
In Proceedings of the 1st International Conference on Sealing Technology and Plant Leakage Reduction (ICSTPLR99) (Charlotte, NC, USA, Nov. 15-19, 1999)
29.21-29.18.
Mameri, N., Piron, D. L., Derenne, M., Marchand, L., Bouzid, A. et Birembaut, Y..
1999.
« Influence des joints d’étanchéité sur la corrosion des aciers: Développement d’un nouvel appareillage ».
In Proceedings of the International Symposium of the 38th Annual Conference of Metallurgists of CIM (Quebec City, QC, Canada, Aug. 22-26, 1999)
pp. 287-299.
Montreal, QC, Canada : Canadian Institute of Mining, Metallurgy and Petroleum. 1998
Bouzid, A. H., Derenne, M. et Chaarani, A..
1998.
« Tightness prediction of bolted flanged connections subjected to external bending moments ».
In Proceedings of the 1998 ASME/JSME PVP Conference (San Diego, CA, USA, July 26-30, 1998)
Coll. « Pressure Vessels and Piping Conference PVP », vol. 367.
pp. 61-64.
American Society of Mechanical Engineers.
Derenne, M., Marchand, L., Bouzid, A. et Payne, J. R..
1998.
« Proposed modifications to Draft No. 9 of the standard test method for gasket constants for bolted joint design ».
In Proceeding of the 1998 FSA symposium (Nashville, TN, USA, April, 1998)
Masi, V., Bouzid, A. H. et Derenne, M..
1998.
« Correlation between gases and mass leak rate of gasketing materials ».
In Proceedings of the 1998 ASME/JSME PVP Conference (San Diego, CA, USA, July 26-30, 1998)
Coll. « Pressure Vessels and Piping Conference PVP », vol. 367.
pp. 17-20.
American Society of Mechanical Engineers. 1997
Bouzid, A. et Chaaban, A..
1997.
« An accurate method of evaluating relaxation in bolted flanged connections ».
Journal of Pressure Vessel Technology, vol. 119, nº 1.
pp. 10-17.
Bouzid, A. et Derenne, M..
1997.
« Distribution of the gasket contact stress in bolted flanged connections ».
In Proceedings of the 1997 ASME/PVP Conference (Orlando, FL, USA, July 27-31, 1997)
Coll. « Pressure Vessels and Piping Conference PVP », vol. 354.
pp. 185-189.
American Society of Mechanical Engineers. 1996
Bouzid, A. et Chaaban, A..
1996.
« Proposed method for evaluating relaxation in bolted flanged connections ».
In Proceedings of the International Conference on Pressure Vessel Technology (ICPVT-8) (Montreal, Qc, Canada, July 21-26, 1996)
pp. 123-132.
New York, NY, USA : ASME.
Chaaban, A., Bouzid, A., Derenne, M. et Schaefer, W..
1996.
« On the use of a simple test fixture as a reliable representation of typical ANSI B16.5 flanged joint relaxation behaviour ».
In 4ème Colloque international sur l'étanchéité des assemblages statiques avec joints = 4th International symposium on fluid sealing of static gasketed joints (Mandelieu - La Napoule, France, Sept. 17-19, 1996)
Coll. « Publication CEDTIM »
pp. 287-294.
Senlis, France : Centre Technique des Industries Mécaniques. 1995
Bouzid, A., Chaaban, A. et Bazergui, A..
1995.
« Effect of gasket creep-relaxation on the leakage tightness of bolted flanged joints ».
Journal of Pressure Vessel Technology, vol. 117, nº 1.
pp. 71-78. 1994
Bouzid, A., Chaaban, A. et Bazergui, A..
1994.
« Effect of gasket creep relaxation on the leakage tightness of bolted flanged joints ».
In Proceedings of the 1994 Pressure Vessels and Piping Conference (Minneapolis, MN, USA, June 19-23, 1994)
Coll. « Pressure Vessels and Piping Division (Publication) PVP », vol. 286.
pp. 155-163.
American Society of Mechanical Engineers.
Bouzid, A., Chaaban, A. et Bazergui, A..
1994.
« The influence of the flange rotation on the leakage performance of bolted flanged joints ».
In CSME Forum, 1994 = Forum 1994 de la SCGM : proceedings/Comptes rendus (Montréal, QC, Canada, June 27-29, 1994)
pp. 184-194.
Ottawa, ON : Canadian Society for Mechanical Engineering. 1993
Bouzid, A. et Chaaban, A..
1993.
« Flanged joint analysis: a simplified method based on elastic interaction ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 17, nº 2.
pp. 181-196.
Chaaban, A., Bouzid, A., Derenne, M. et Schaefer, W..
1993.
« Evaluation of torque coefficients and gasket stress distributions in a bolted flanged joint using different types of lubricants ».
In 3ème colloque international sur l'étanchéité des assemblages statiques avec joints = 3rd International Symposium on Fluid Sealing of Static Gasketed Joints (Biarritz, France, Sept. 15-17, 1993)
Coll. « Publication CEDTIM »
pp. 451-462.
Centre Technique des Industries Mécaniques. 1992
Bouzid, A. et Chaaban, A..
1992.
« Flanged joints analysis: a simplified method based on elastic interaction ».
In Proceedings of the 11th Symposium on Engineering Applications of Mechanics (Regina, SK, Canada, May 11-13, 1992)
pp. 8-13.
University of Regina. |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau