ENGLISH
La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS
RECHERCHER

Liste des publications de "Jahazi, Mohammad"

Monter d'un niveau
Exporter en format [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Groupement par Année | Type de document | Sans groupement
Aller à 2018 | 2017 | 2016 | 2015 | 2014 | 2013 | 2012 | 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 | 1999 | 1998 | 1997 | 1995 | 1994 | 1993 | 1992 | 1991 | 1990 | 1988 | 1987
Nombre de documents archivés : 274.

2018

Al-Hashedi, Ashwaq A. et Laurenti, Marco et Amine Mezour, Mohamed et Basiri, Tayebeh et Touazine, Heithem et Jahazi, Mohamed et Tamimi, Faleh. 2018. « Advanced inorganic nanocomposite for decontaminating titanium dental implants ». Journal of Biomedical Materials Research - Part B Applied Biomaterials.
(Sous presse)

Aranas, Clodualdo Jr. et Rodrigues, Samuel et Fall, Ameth et Jahazi, Mohammad et Jonas, John. 2018. « Determination of the critical stress associated with dynamic phase transformation in steels by means of free energy method ». Metals, vol. 8, nº 5.

Ben Fredj, Emna et Ghasemi Nanesa, Hadi et Jahazi, Mohammad et Morin, Jean-Benoit. 2018. « Influence of initial microstructure and grain size on transformation of bainite to austenite in large size forgings ». Journal of Iron and Steel Research International, vol. 25, nº 5. p. 554-562.

Bitterlin, Matthieu et Shahriari, Davood et Lapierre-Boire, Louis-Philippe et Morin, Jean-Benoît et Jahazi, Mohammad. 2018. « Hot deformation behavior of a nickel-modified AISI 4330 steel ». ISIJ International, vol. 58, nº 9. p. 1711-1720.

Dupont-Marillia, Frederic et Jahazi, Mohammad et Bélanger, Pierre. 2018. « Phased array inspection of large size forged steel parts ». In 44th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2017) (Provo, UT, USA, July 15-21, 2017) Coll. « AIP Conference Proceedings », vol. 1949. American Institute of Physics.

Guo, Baoqi et Aranas, Clodualdo et Foul, Anes et Ji, Xiankun et Fall, Ameth et Jahazi, Mohammad et Jonas, John J.. 2018. « Effect of multipass deformation at elevated temperatures on the flow behavior and microstructural evolution in Ti-6Al-4V ». Materials Science and Engineering A, vol. 729. p. 119-124.

Loucif, Abdelhalim et Ben Fredj, Emna et Harris, Nathan et Shahriari, Davood et Jahazi, Mohammad et Lapierre-Boire, Louis-Philippe. 2018. « Evolution of A-type macrosegregation in large size steel ingot after multistep forging and heat treatment ». Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 49, nº 3. p. 1046-1055.
Compte des citations dans Scopus : 3.

Loucif, Abdelhalim et Bitterlin, Matthieu et Jahazi, Mohammad et Tremblay, Rami et Morin, Jean-Benoît et Lapierre-Boire, Louis-Philippe. 2018. « Determination of the root causes for cracking in a large-size cast ingot of AISI 4317 steel using microstructural analysis ». Metallography, Microstructure, and Analysis, vol. 7, nº 2. p. 203-208.

Lyassami, Mountadar et Shahriari, Davood et Ben Fredj, Emna et Morin, Jean-Benoit et Jahazi, Mohammad. 2018. « Numerical simulation of water quenching of large size steel forgings: Effects of macrosegregation and grain size on phase distribution ». Journal of Manufacturing and Materials Processing, vol. 2, nº 2.

Majidi, Omid et Jahazi, Mohammad et Bombardier, Nicolas. 2018. « A viscoplastic model based on a variable strain rate sensitivity index for superplastic sheet metals ». International Journal of Material Forming.
(Sous presse)

Majidi, Omid et Jahazi, Mohammad et Bombardier, Nicolas. 2018. « Characterization of mechanical properties and formability of a superplastic Al-Mg alloy ». In NUMISHEET 2018: 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (Tokyo, Japan, July 30-Aug. 6, 2018) Coll. « Journal of Physics: Conference Series », vol. 1063. IOP Publishing.

Masoumi Khalilabad, Mahdi et Zedan, Yasser et Texier, Damien et Jahazi, Mohammad et Bocher, Philippe. 2018. « Effect of tool geometry and welding speed on mechanical properties of dissimilar AA2198–AA2024 FSWed joint ». Journal of Manufacturing Processes, vol. 34, part A. p. 86-95.
Compte des citations dans Scopus : 1.

Masoumi, F. et Thebaud, L. et Shahriari, D. et Jahazi, M. et Cormier, J. et Devaux, A. et Flipo, B. C. D.. 2018. « High temperature creep properties of a linear friction welded newly developed wrought Ni-based superalloy ». Materials Science and Engineering A, vol. 710. p. 214-226.

Mostafa, Ahmad et Shahriari, Davood et Rubio, Ignacio Picazo et Brailovski, Vladimir et Jahazi, Mohammad et Medraj, Mamoun. 2018. « Hot compression behavior and microstructure of selectively laser-melted IN718 alloy ». International Journal of Advanced Manufacturing Technology, vol. 96, nº 1-4. p. 371-385.
Compte des citations dans Scopus : 2.

Seede, Raiyan et Mostafa, Ahmad et Brailovski, Vladimir et Jahazi, Mohammad et Medraj, Mamoun. 2018. « Microstructural and microhardness evolution from homogenization and hot isostatic pressing on selective laser melted inconel 718: Structure, texture, and phases ». Journal of Manufacturing and Materials Processing, vol. 2, nº 2.

Sun, Binhan et Fazeli, Fateh et Scott, Colin et Guo, Baoqi et Aranas, Clodualdo et Chu, Xin et Jahazi, Mohammad et Yue, Stephen. 2018. « Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions ». Materials Science and Engineering A, vol. 729. p. 496-507.

Talebi, Seyyed Hesamondin et Jahazi, Mohammad et Melkonyan, Haikouhi. 2018. « Retained austenite decomposition and carbide precipitation during isothermal tempering of a medium-carbon low-alloy bainitic steel ». Materials, vol. 11, nº 8.

Zhang, C. et Shahriari, D. et Loucif, A. et Melkonyan, H. et Jahazi, M.. 2018. « Influence of thermomechanical shrinkage on macrosegregation during solidification of a large-sized high-strength steel ingot ». International Journal of Advanced Manufacturing Technology.
(Sous presse)

2017

Aidibe, Ali et Nejad, Mojtaba Kamali et Tahan, Antoine et Jahazi, Mohammad et Cloutier, Sylvain G.. 2017. « Surface characterization of die inserts used for LED lamp plastic lenses ». International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12. p. 3395-3403.

Aranas, Clodualdo et Foul, Anes et Guo, Baoqi et Fall, Ameth et Jahazi, Mohammad et Jonas, John J.. 2017. « Determination of the critical stress for the initiation of dynamic transformation in commercially pure titanium ». Scripta Materialia, vol. 133. p. 83-85.
Compte des citations dans Scopus : 4.

Bonakdar, Ali et Molavi-Zarandi, Marjan et Chamanfar, Ahmad et Jahazi, Mohammad et Firoozrai, Arash et Morin, Eric. 2017. « Finite element modeling of the electron beam welding of Inconel-713LC gas turbine blades ». Journal of Manufacturing Processes, vol. 26. p. 339-354.
Compte des citations dans Scopus : 6.

Chadha, K. et Shahriari, D. et Tremblay, R. et Bhattacharjee, P. P. et Jahazi, M.. 2017. « Deformation and recrystallization behavior of the cast structurein large size, high strength steel ingots: Experimentation and modeling ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 48, nº 9. p. 4297-4313.
Compte des citations dans Scopus : 2.

Chamanfar, Ahmad et Monajati, Hossein et Rosenbaum, Alex et Jahazi, Mohammad et Bonakdar, Ali et Morin, Eric. 2017. « Microstructure and mechanical properties of surface and subsurface layers in broached and shot-peened Inconel-718 gas turbine disc fir-trees ». Materials Characterization, vol. 132. p. 53-68.
Compte des citations dans Scopus : 8.

Chentouf, S. M. et Belhadj, T. et Bombardier, N. et Brodusch, N. et Gauvin, R. et Jahazi, M.. 2017. « Influence of predeformation on microstructure evolution of superplastically formed Al 5083 alloy ». International Journal of Advanced Manufacturing Technology, vol. 88, nº 9. p. 2929-2937.
Compte des citations dans Scopus : 5.

Dupont-Marillia, Frederic et Jahazi, Mohammad et Lafreniere, Serge et Bélanger, Pierre. 2017. « Influence of local mechanical properties of high strength steel from large size forged ingot on ultrasonic wave velocities ». In 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation (Atlanta, GA, USA, July 17-22, 2016) Coll. « AIP Conference Proceedings », vol. 1806. USA : American Institute of Physics.
Compte des citations dans Scopus : 1.

Fall, A. et Jahazi, M. et Khodabandeh, A. R. et Fesharakib, M. H.. 2017. « Effect of process parameters on microstructure and mechanical properties of friction stir-welded Ti-6Al-4V joints ». International Journal of Advanced Manufacturing Technology, vol. 91, nº 5-8. p. 2919-2931.
Compte des citations dans Scopus : 5.

Fredj, Emna Ben et Nanesa, Hadi Ghasemi et Shahriari, Davood et Morin, Jean-Benoit et Jahazi, Mohammad. 2017. « Effect of cooling rate on phase transformation and microstructure evolution in a large size forged ingot of medium carbon low alloy steel ». In TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings (San Diego, CA, USA, Feb. 26-March 2, 2017) Coll. « The Minerals, Metals & Materials Series ». , p. 413-423. Springer International Publishing.

Ghasemi-Nanesa, Hadi et Jahazi, Mohammad et Heidari, Majid et Levasseur, Tom. 2017. « The influence of deformation-induced microvoids on mechanical failure of AISI A8-Mod martensitic tool steel ». In 20th International ESAFORM Conference on Material Forming (ESAFORM) (Dublin, Ireland, Apr. 26-28, 2017) Coll. « AIP Conference Proceedings », vol. 1896. USA : American Institute of Physics.

Harris, Nathan et Shahriari, Davood et Jahazi, Mohammad. 2017. « Development of a fast converging material specific void closure model during ingot forging ». Journal of Manufacturing Processes, vol. 26. p. 131-141.
Compte des citations dans Scopus : 2.

Hesamodin Talebi, S. et Ghasemi-Nanesa, Hadi et Jahazi, Mohammad et Melkonyan, Haikouhi. 2017. « In situ study of phase transformations during non-isothermal tempering of bainitic and martensitic microstructures ». Metals, vol. 7, nº 9.
Compte des citations dans Scopus : 1.

Jonas, John J. et Aranas, Clodualdo et Fall, Ameth et Jahazi, Mohammad. 2017. « Transformation softening in three titanium alloys ». Materials & Design, vol. 113. p. 305-310.
Compte des citations dans Scopus : 14.

Loucif, Abdelhalim et Shahriari, Davood et Zhang, Chunping P. et Jahazi, Mohammad et Lapierre-Boire, Louis-Philippe et Tremblay, Rami. 2017. « Macrosegregation of alloying elements in hot top of large size high strength steel ingot ». In International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) Coll. « Materials Science Forum », vol. 879. , p. 1176-1181. Trans Tech Publications.

Majidi, Omid et Jahazi, Mohammad et Bombardier, Nicolas et Samuel, Ehab. 2017. « Variation of strain rate sensitivity index of a superplastic aluminum alloy in different testing methods ». In 20th International ESAFORM Conference on Material Forming (ESAFORM) (Dublin, Ireland, Apr. 26-28, 2017) Coll. « AIP Conference Proceedings », vol. 1896. USA : American Institute of Physics.
Compte des citations dans Scopus : 2.

Masoumi, F. et Shahriari, D. et Jahazi, M. et Cormier, J. et Flipo, B. C. D.. 2017. « On the occurrence of liquation during linear friction welding of Ni-based superalloys ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 48A, nº 6. p. 2886-2899.
Compte des citations dans Scopus : 3.

Mostafa, Ahmad et Rubio, Ignacio Picazo et Brailovski, Vladimir et Jahazi, Mohammad et Medraj, Mamoun. 2017. « Structure, texture and phases in 3D printed IN718 alloy subjected to homogenization and HIP treatments ». Metals, vol. 7, nº 6.
Compte des citations dans Scopus : 14.

Saadati, Mohammad et Azari Khosroshahi, Rasoul et Ebrahimi, Golamreza et Jahazi, Mohammad. 2017. « Twin-assisted precipitation during hot compression of an Mg-Gd-Zn-Zr magnesium alloy ». Materials Science and Engineering A, vol. 706. p. 142-152.
Compte des citations dans Scopus : 1.

Saadati, Mohammad et Khosroshahi, Rasoul Azari et Ebrahimi, Gholamreza et Jahazi, Mohammad. 2017. « Formation of precipitates in parallel arrays on LPSO structures during hot deformation of GZ41K magnesium alloy ». Materials Characterization, vol. 131. p. 234-243.
Compte des citations dans Scopus : 2.

Sun, Binhan et Vanderesse, Nicolas et Fazeli, Fateh et Scott, Colin et Chen, Jianqiang et Bocher, Philippe et Jahazi, Mohammad et Yue, Stephen. 2017. « Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel ». Scripta Materialia, vol. 133. p. 9-13.
Compte des citations dans Scopus : 17.

Tongne, Amèvi et Desrayaud, Christophe et Jahazi, Mohammad et Feulvarch, Eric. 2017. « On material flow in friction stir welded al alloys ». Journal of Materials Processing Technology, vol. 239. p. 284-296.
Compte des citations dans Scopus : 16.

Touazine, Heithem et Akab, Jordan et Jahazi, Mohammad et Tahan, Antoine et Jomaa, Walid et Bocher, Philippe. 2017. « Modeling of the microstructure alteration induced by hard turning of Inconel 718 ». International Journal of Advanced Manufacturing Technology, vol. 93, nº 9-12. p. 3705-3712.

Touazine, Heithem et Jahazi, Mohammad et Bocher, Philippe. 2017. « Accurate determination of damaged subsurface layers in machined Inconel 718 ». International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12. p. 3419-3427.
Compte des citations dans Scopus : 3.

Zhang, Chunping P. et Shahriari, Davood et Loucif, Abdelhalim et Jahazi, Mohammad et Lapierre-Boire, Louis-Philippe et Tremblay, Rami. 2017. « Effect of segregated alloying elements on the high strength steel properties: Application to the large size ingot casting simulation ». In TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings (San Diego, CA, USA, Feb. 26-Mar. 02, 2017) Coll. « Minerals Metals & Materials Series ». , p. 491-500. Springer International Publishing.

Zhang, Chunping et Shahriari, Davood et Loucif, Abdelhalim et Jahazi, Mohammad et Lapierre-Boire, Louis-Philippe et Tremblay, Rami. 2017. « Effect of thermo-physical properties on solidification behavior of large size high strength steel ingots ». In 7th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (SteelSim) (Qingdao, China, Aug. 16-17, 2017) The Chinese Society for Metals.

2016

Aidibe, Ali et Nejad, Mojtaba Kamali et Tahan, Antoine et Jahazi, Mohammad et Cloutier, Sylvain G.. 2016. « A proposition for new quality 3D indexes to measure surface roughness ». In 7th HPC 2016 - CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016) Coll. « Procedia CIRP », vol. 46. , p. 327-330. Elsevier.

Anderson, M. et Bridier, F. et Gholipour, J. et Jahazi, M. et Wanjara, P. et Bocher, P. et Savoie, J.. 2016. « Mechanical and metallurgical evolution of stainless steel 321 in a multi-step forming process ». Journal of Materials Engineering and Performance, vol. 25, nº 4. p. 1526-1538.
Compte des citations dans Scopus : 1.

Bitterlin, Matthieu et Loucif, Abdelhalim et Charbonnier, Nicolas et Jahazi, Mohammad et Lapierre-Boire, Louis-Philippe et Morin, Jean-Benoît. 2016. « Cracking mechanisms in large size ingots of high nickel content low alloyed steel ». Engineering Failure Analysis, vol. 68. p. 122-131.
Compte des citations dans Scopus : 7.

Chadha, K. et Shahriari, D. et Jahazi, M.. 2016. « Constitutive modelling of ingot breakdown process of low alloy steels ». Metallurgia Italiana, vol. 108, nº 4. p. 5-12.
Compte des citations dans Scopus : 5.

Chadha, Kanwal et Shahriari, Davood et Jahazi, Mohammad. 2016. « Modeling metadynamic recrystallization of a die steel during ingot breakdown process ». In NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes (Troyes, France, July 04-07, 2016) Coll. « MATEC Web Conferences », vol. 80. EDP Sciences.

Fall, Ameth et Fesharaki, Mostafa Hashemi et Khodabandeh, Ali Reza et Jahazi, Mohammad. 2016. « Tool wear characteristics and effect on microstructure in Ti-6Al-4V friction stir welded joints ». Metals, vol. 6, nº 11. p. 275-286.
Compte des citations dans Scopus : 8.

Ghasemi-Nanesa, Hadi et Touazine, Heithem et Jahazi, Mohammad. 2016. « Influence of cryogenic process parameters on microstructure and hardness evolution of AISI D2 tool steel ». International Journal of Advanced Manufacturing Technology, vol. 85, nº 1. p. 881-890.
Compte des citations dans Scopus : 1.

Grewal, Rupanjit et Aranas, Clodualdo et Chadha, Kanwal et Shahriari, Davood et Jahazi, Mohammad et Jonas, John J.. 2016. « Formation of Widmanstatten ferrite at very high temperatures in the austenite phase field ». Acta Materialia, vol. 109. p. 23-31.
Compte des citations dans Scopus : 17.

Harris, Nathan et Shahriari, Davood et Jahazi, Mohammad. 2016. « Analysis of void closure during open die forging process of large size steel ingots ». In 16th Metal Forming International Conference (Krakow, Poland, Sept. 18-21, 2016) Coll. « Key Engineering Materials », vol. 716. , p. 579-585.
Compte des citations dans Scopus : 1.

Masoumi, F. et Jahazi, M. et Shahriari, D. et Cormier, J.. 2016. « Coarsening and dissolution of γ′ precipitates during solution treatment of AD730™ Ni-based superalloy: Mechanisms and kinetics models ». Journal of Alloys and Compounds, vol. 658. p. 981-995.
Compte des citations dans Scopus : 23.

Masoumi, F. et Shahriari, D. et Jahazi, M. et Cormier, J. et Devaux, A.. 2016. « Kinetics and mechanisms of γ′ reprecipitation in a Ni-based superalloy ». Scientific Reports, vol. 6.
Compte des citations dans Scopus : 14.

Nanesa, Hadi Ghasemi et Boulgakoff, Julien et Jahazi, Mohammad. 2016. « Influence of prior cold deformation on microstructure evolution of AISI D2 tool steel after hardening heat treatment ». Journal of Manufacturing Processes, vol. 22. p. 115-119.
Compte des citations dans Scopus : 2.

Salari, Emad et Jahazi, Mohammad et Khodabandeh, Alireza et Nanesa, Hadi Ghasemi. 2016. « Friction stir lap welding of 5456 aluminum alloy with different sheet thickness: process optimization and microstructure evolution ». International Journal of Advanced Manufacturing Technology, vol. 82, nº 1. p. 39-48.
Compte des citations dans Scopus : 4.

Sathiaraj, G. D. et Tsai, C. W. et Yeh, J. W. et Jahazi, M. et Bhattacharjee, P. P.. 2016. « The effect of heating rate on microstructure and texture formation during annealing of heavily cold-rolled equiatomic CoCrFeMnNi high entropy alloy ». Journal of Alloys and Compounds, vol. 688. p. 752-761.
Compte des citations dans Scopus : 8.

Tongne, A. et Robe, H. et Desrayaud, C. et Jahazi, M. et Feulvarch, E.. 2016. « Two dimensional Coupled Eulerian Lagrangian (CEL) model for banded structure prediction in friction stir welding with trigonal tool ». In ESAFORM 2016: 19th International ESAFORM Conference on Material Forming (Nantes, France, Apr. 27-29, 2016) Coll. « AIP Conference Proceedings », vol. 1769. USA : American Institute of Physics.

Zoghlami, Mariem et Jahazi, Mohammad et Songmene, Victor. 2016. « The effects of friction stir welding parameters on the characteristics of banded structure for aluminum alloys ». In 13th International Aluminium Conference (INALCO) (Naples, Italy, Sept. 21-23, 2016) Coll. « Key Engineering Materials », vol. 710. , p. 155-159. Trans Tech Publications Ltd.

2015

Aranas, Clodualdo et Grewal, Rupanjit et Chadha, Kanwal et Shahriari, Davood et Jahazi, Mohammad et Jonas, John J.. 2015. « Formation of widmanstätten ferrite in a C-Mn steel at temperatures high in the austenite phase field ». In International Conference on Solid-Solid Phase Transformations in Inorganic Materials 201 (PTM 2015) (Whistler, BC, Canada, June 28, 2015 - July 3, 2015), p. 613-620. International Conference on Solid-Solid Phase Transformations in Inorganic Materials.
Compte des citations dans Scopus : 4.

Belhadj, T. et Songmene, V. et Jahazi, M.. 2015. « Influence des paramètres de procédé sur la distorsion de grandes plaques d'aluminium formées par thermoformage : phase d'éjection ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (Chicoutimi, QC, Canada, 11 nov. 2015).

Chadha, K. et Shahriari, D. et Jahazi, M.. 2015. « Constitutive modelling of ingot breakdown process of low alloy steels ». In 6th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (SteelSim 2015) (Bardolino, Italy, Sept. 23-25, 2015) Associazione Italiana di Metallurgia.

Chadha, Kanwal et Bhattacharjee, Pinaki Prasad et Jahazi, Mohammad. 2015. « The effect of strain reversal during high pressure torsion on the microstructure evolution and texture of aluminum alloys ». In Characterization of Minerals, Metals, and Materials 2015 - TMS 2015 144th Annual Meeting and Exhibition, March 15, 2015 - March 19, 2015 (Orlando, FL, USA, March 15-19, 2015) Coll. « TMS Annual Meeting ». , p. 107-114. Minerals, Metals and Materials Society.

Chadha, Kanwal et Jahazi, Mohammad et Loucif, Abdelhalim et Shahriari, Davood. 2015. « Effect of deformation temperature and interpass time on microstructure evolution and mechanical properties of medium carbon low alloy steel during ingot breakdown process ». In 2015 TMS Annual Meeting & Exhibition : Phase Transformations and Microstructural Evolution (Orlando, FL, Canada, Mar. 15-19, 2015)

Chadha, Kanwal et Shahriari, Davood et Jahazi, Mohammad. 2015. « An approach to develop hansel-spittel constitutive equation during ingot breakdown operation of low alloy steels ». In International Conference on Frontiers in Materials Processing Applications, Research & Technology (FiMPart'15) (Hyderabad, India, June 12-15, 2015)

Chamanfar, A. et Jahazi, M. et Bonakdar, A. et Morin, E. et Firoozrai, A.. 2015. « Cracking in fusion zone and heat affected zone of electron beam welded Inconel-713LC gas turbine blades ». Materials Science and Engineering: A, vol. 642. p. 230-240.
Compte des citations dans Scopus : 10.

Chamanfar, A. et Jahazi, Mohammad et Cormier, J.. 2015. « A review on inertia and linear friction welding of Ni-based superalloys ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 46, nº 4. p. 1639-1669.
Compte des citations dans Scopus : 15.

Chamanfar, A. et Jahazi, Mohammad et Gholipour, J. et Wanjara, P. et Yue, S.. 2015. « Analysis of integrity and microstructure of linear friction welded Waspaloy ». Materials Characterization, vol. 104. p. 149-161.
Compte des citations dans Scopus : 10.

Chentouf, Samir Mourad et Belhadj, T. et Bombardier, N. et Jahazi, M.. 2015. « Influence of reduction rate on the characteristics of cavities in superplastically formed 5083 aluminum alloy ». In 54th annual conference of metallurgists (COM 2015) (Toronto, ON, Canada, Aug. 23-26, 2015)

Ghasemi Nanesa, H. et Jahazi, Mohammad. 2015. « Alternative phase transformation path in cryogenically treated AISI D2 tool steel ». Materials Science and Engineering: A, vol. 634. p. 32-36.
Compte des citations dans Scopus : 5.

Ghasemi-Nanesa, Hadi et Jahazi, Mohammad et Naraghi, Reza. 2015. « Martensitic transformation in AISI D2 tool steel during continuous cooling to 173K ». Journal of Materials Science, vol. 50, nº 17. p. 5758-5768.
Compte des citations dans Scopus : 8.

Loucif, Abdelhalim et Fredj, Emna Ben et Jahazi, Mohammad et Lapierreboire, Louis-Philippe et Tremblay, Rami et Beauvais, Raymond. 2015. « Analysis of macrosegregation in large size forged ingot of high strength steel ». In Proceedings of the 6th International Congress on the Science and Technology of Steelmaking (ICS 2015) (Beijing, China, May 12-14, 2015), p. 1043-1046. Chinese Society for Metals.
Compte des citations dans Scopus : 3.

Maamri, Ilyes et Barka, Noureddine et El Ouafi, Abderrazak et Jahazi, Mohammad. 2015. « A sensitivity study of 4340 steel hardness profile heat-treated by laser ». International Journal of Emerging Technology and Advanced Engineering, vol. 5, nº 9. p. 7-13.

Nanesa, Hadi Ghasemi et Jahazi, Mohammad et Levasseur, Tom. 2015. « On the martensitic transformation of AISI D2 tool steel through cryogenic cooling ». In International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (PTM 2015) (Whistler, BC, Canada, June 28-July 3, 2015), p. 641-642. International Conference on Solid-Solid Phase Transformations in Inorganic Materials.

Nanesa, Hadi Ghasemi et Jahazi, Mohammad et Levasseur, Tom. 2015. « Transmission electron microscopy study of micro-structure evolution in cryotreated AISI D2 tool steel ». In International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (PTM 2015) (Whistler, BC, Canada, June 28-July 3, 2015), p. 735-736. International Conference on Solid-Solid Phase Transformations in Inorganic Materials.

Shahriari, D. et Loucif, Abdelhalim et Jahazi, Mohammad et Tremblay, R. et Beauvais, R.. 2015. « 3D numerical simulation of solidification of large size ingots of high strength steels ». In 6th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM2015) (Bardolino, Italy, Sept. 23-25, 2015)

Tongne, A. et Jahazi, Mohammad et Feulvarch, E. et Desrayaud, C.. 2015. « Banded structures in friction stir welded Al alloys ». Journal of Materials Processing Technology, vol. 221. p. 269-278.
Compte des citations dans Scopus : 14.

Tongne, Amèvi et Desrayaud, Christophe et Jahazi, Mohammad et Feulvarch, Eric. 2015. « Analytical modeling of material flow in friction stir welding ». In 11th International Seminar on Numerical Analysis of Weldability (Graz, Austria, Sept. 27-30, 2015)

2014

Barka, Noureddine et Chebak, Ahmed et El Ouafi, Abderrazak et Jahazi, Mohammad et Menou, Abdellah. 2014. « A new approach in optimizing the induction heating process using flux concentrators: Application to 4340 steel spur gear ». Journal of Materials Engineering and Performance, vol. 23, nº 9. p. 3092-3099.
Compte des citations dans Scopus : 1.

Chamanfar, A. et Jahazi, M. et Gholipour, J. et Wanjara, P. et Yue, S.. 2014. « Evolution of flow stress and microstructure during isothermal compression of Waspaloy ». Materials Science and Engineering A, vol. 615. p. 497-510.
Compte des citations dans Scopus : 13.

Chentouf, S. M. et Jahazi, M. et Lapierre-Boire, L. P. et Godin, S.. 2014. « Characteristics of austenite transformation during post forge cooling of large-size high strength steel Ingots ». Metallography, Microstructure, and Analysis, vol. 3, nº 4. p. 281-297.
Compte des citations dans Scopus : 4.

Chentouf, Samir Mourad et Jahazi, Mohammad et Fortin, Rejean. 2014. « Influence of the quench process on microstructure evolution in a landing gear steel ». In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME).

Dadaei, Mostafa et Omidvar, Hamid et Bagheri, Behrouz et Jahazi, Mohammad et Abbasi, Mahmoud. 2014. « The effect of SiC/Al2O3 particles used during FSP on mechanical properties of AZ91 magnesium alloy ». International Journal of Materials Research, vol. 105, nº 4. p. 369-374.
Compte des citations dans Scopus : 6.

Ebrahimi, Gholam Reza et Momeni, Amir et Jahazi, Mohammad et Bocher, Philippe. 2014. « Dynamic recrystallization and precipitation in 13Cr super-martensitic stainless steels ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 45, nº 4. p. 2219-2231.
Compte des citations dans Scopus : 14.

Ghasemi-Nanesa, Hadi et Jahazi, Mohammad. 2014. « Simultaneous enhancement of strength and ductility in cryogenically treated AISI D2 tool steel ». Materials Science and Engineering A, vol. 598. p. 413-419.
Compte des citations dans Scopus : 10.

Ghasemi-Nanesa, Hadi et Jahazi, Mohammad et Trigo, Gil et Levasseur, Tom. 2014. « Influence of cryogenic treatment on microstructure characteristics and mechanical properties of AISI D2 tool steel ». In TMS 2014 Supplemental Proceedings), p. 991-997. Hoboken, NJ, USA : John Wiley & Sons, Inc..

Keivani, R. et Jahazi, Mohammad et Pham, Tan et Khodabandeh, A. R. et Afshar, M. R.. 2014. « Predicting residual stresses and distortion during multisequence welding of large size structures using FEM ». International Journal of Advanced Manufacturing Technology, vol. 73, nº 1-4. p. 409-419.
Compte des citations dans Scopus : 12.

Khalaj, Gholamreza et Nazari, Ali et Yoozbashizadeh, Hossein et Khodabandeh, Alireza et Jahazi, Mohammad. 2014. « ANN model to predict the effects of composition and heat treatment parameters on transformation start temperature of microalloyed steels ». Neural Computing and Applications, vol. 24, nº 2. p. 301-308.
Compte des citations dans Scopus : 6.

Masoumi, Fatemeh et Jahazi, Mohammad et Cormier, J. et Shahriari, D.. 2014. « Dissolution kinetics and morphological changes of γ′ in AD730TM superalloy ». In 2nd European Symposium on Superalloys and Their Applications, EUROSUPERALLOYS 2014 (Giens, France, May 12-16, 2014) Coll. « MATEC Web of Conferences », vol. 14.
Compte des citations dans Scopus : 2.

Momeni, A. et Ebrahimi, G. R. et Jahazi, Mohammad et Bocher, Philippe. 2014. « Microstructure evolution at the onset of discontinuous dynamic recrystallization: a physics-based model of subgrain critical size ». Journal of Alloys and Compounds, vol. 587. p. 199-210.
Compte des citations dans Scopus : 46.

Rosenbaum, A. et Chamanfar, A. et Jahazi, Mohammad et Bonakdar, A.. 2014. « Microstructure analysis of broached inconel-718 gas turbine disc fir-trees ». In Proceedings of the ASME Turbo Expo (Dusseldorf, Germany, June 16-20, 2014) American Society of Mechanical Engineers (ASME).

Salari, Emad et Jahazi, Mohammad et Khodabandeh, Alireza et Ghasemi-Nanesa, Hadi. 2014. « Influence of tool geometry and rotational speed on mechanical properties and defect formation in friction stir lap welded 5456 aluminum alloy sheets ». Materials and Design, vol. 58. p. 381-389.
Compte des citations dans Scopus : 49.

Touazine, H. et Jahazi, Mohammad et Bocher, Philippe. 2014. « Influence of hard turning on microstructure evolution in the subsurface layers of Inconel 718 ». In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME).

2013

Anderson, Melissa et Gholipour, Javad et Bridier, Florent et Bocher, Philippe et Jahazi, Mohammad et Savoie, Jean et Wanjara, Priti. 2013. « Improving the formability of stainless steel 321 through multistep deformation for hydroforming applications ». Transactions of the Canadian Society for Mechanical Engineering, vol. 37, nº 1. p. 39-52.
Compte des citations dans Scopus : 4.

Asadi, Mahyar et Guillot, Dominic et Weck, Arnaud et Koul, Ashok K. et Chamanfar, Ahmad et Jahazi, Mohammad. 2013. « Constructing a validated deformation mechanism map using low temperature creep strain accommodation processes for waspaloy (A nickel-based superalloy) ». In American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013) New York, NY, USA : American Society of Mechanical Engineers.

Bensalah, M. et Chamanfar, A. et Chentouf, S. et Jahazi, M.. 2013. « The influence of thermomechanical processing on prior austenite grain size in medium carbon low alloy steels ». In Materials Science & Technology Conference and Exhibition 2013 (MS&T'13) (Montreal, QC, Canada, Oct. 27-31, 2013) Curran.

Boutana, N. et Bocher, P. et Jahazi, M.. 2013. « Discrepancy between fatigue and dwell-fatigue behavior of near alpha titanium alloys simulated by cellular automata ». International Journal of Fatigue, vol. 51. p. 49-56.
Compte des citations dans Scopus : 4.

Chamanfar, A. et Sarrat, L. et Jahazi, M. et Asadi, M. et Weck, A. et Koul, A. K.. 2013. « Microstructural characteristics of forged and heat treated Inconel-718 disks ». Materials and Design, vol. 52. p. 791-800.
Compte des citations dans Scopus : 60.

Chamanfar, Ahmad et Jahazi, Mohammad et Gholipour, Javad et Wanjara, Priti et Yue, Stephen. 2013. « Modeling grain size and strain rate in linear friction welded Waspaloy ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 44, nº 9. p. 4230-4238.
Compte des citations dans Scopus : 13.

Jalilian, F. et Jahazi, M. et Drew, R. A. L.. 2013. « Microstructure evolution during transient liquid phase bonding of alloy 617 ». Metallography, Microstructure, and Analysis, vol. 2, nº 3. p. 170-182.
Compte des citations dans Scopus : 5.

Maldar, A. R. et Ebrahimi, G. R. et Haghshenas, Meysam et Jahazi, M. et Bocher, P.. 2013. « Thermomechanical characterization of Mg-9Al-1Zn alloy using power dissipation maps ». Journal of Materials Engineering and Performance, vol. 22, nº 11. p. 3306-3314.
Compte des citations dans Scopus : 3.

Shahriari, D. et Zolfaghari, A. et Jahazi, Mohammad et Bocher, Philippe. 2013. « Development of an expert system to characterize weld defects identified by ultrasonic testing ». In American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013) New York, NY, USA : American Society of Mechanical Engineers.

2012

Anderson, Melissa et Bocher, Philippe et Gholipour, Javad et Jahazi, Mohammad et Savoie, Jean et Wanjara, Priti. 2012. « Increasing the hydroformability of stainless steel 321 by multistep processing ». In Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012 (Krakow, Poland, Sept. 16-19, 2012) Coll. « Steel Research International ». , p. 1243-1246. Krakow, Poland : Wiley-VCH Verlag.

Chamanfar, A. et Jahazi, M. et Gholipour, J. et Wanjara, P. et Yue, S.. 2012. « Maximizing the integrity of linear friction welded Waspaloy ». Materials Science and Engineering A, vol. 555. p. 117-130.
Compte des citations dans Scopus : 18.

Chamanfar, A. et Jahazi, M. et Gholipour, J. et Wanjara, P. et Yue, S.. 2012. « Suppressed liquation and microcracking in linear friction welded WASPALOY ». Materials and Design, vol. 36. p. 113-122.
Compte des citations dans Scopus : 17.

Sarrat, L. et Chamanfar, A. et Jahazi, Mohammad. 2012. « Microstructure evolution of Ni base superalloys during thermomechanical processing ». Communication lors de la conférence : Research and Innovation for Transport Systems of the Future (Paris, France, Nov. 12-15, 2012).

Shahriari, Davood et Heidari, Iman et Kim, Kitae et Jahazi, Mohammad. 2012. « Welding temperature distribution in low carbon steel sheets by FDM and FEM ». In Proceedings of the 14th International Conference on Metal Forming, METAL FORMING 2012 (Krakow, Poland, Sept. 16-19, 2012) Coll. « Steel Research International ». , p. 607-610. Krakow, Poland : Wiley-VCH Verlag.

Zamani, S. et Razavizadeh, H. et Jahazi, Mohammad. 2012. « Microstructure and hardness control of a binary -TiAl alloy by heat treatment ». In 2nd International Advances in Applied Physics and Material Science (Antalya, Turkey, Apr. 26-29, 2012), p. 169-178. Applied Physics and Material Science (APMAS).

Zamani, S. et Razavizadeh, H. et Jahazi, Mohammad. 2012. « The influence of heat-treatment cycles on pressure strength of a binary-TiAl alloy ». In 2nd International Advances in Applied Physics and Material Science (Antalya, Turkey, Apr. 26-29, 2012), p. 158-168. Applied Physics and Material Science (APMAS).

2011

Cao, X. et Jahazi, M.. 2011. « Effect of tool rotational speed and probe length on lap joint quality of a friction stir welded magnesium alloy ». Materials and Design, vol. 32, nº 1. p. 1-11.
Compte des citations dans Scopus : 89.

Chamanfar, A. et Jahazi, M. et Gholipour, J. et Wanjara, P. et Yue, S.. 2011. « Mechanical property and microstructure of linear friction welded WASPALOY ». Metallurgical and Materials Transactions A, vol. 42, nº 3. p. 729-744.
Compte des citations dans Scopus : 32.

Dalgaard, E. et Wanjara, P. et Trigo, G. et Jahazi, M. et Comeau, G. et Jonas, J. J.. 2011. « Linear friction welding of Al-Cu Part 2 - interfacial characteristics ». Canadian Metallurgical Quarterly, vol. 50, nº 4. p. 360-370.
Compte des citations dans Scopus : 14.

2010

Bastajib, N. et Boutana, N. et Bocher, P. et Jahazi, M.. 2010. « Application of cellular automata method to simulate the hot deformation behavior of a dual phase titanium alloy ». Technische Mechanik, vol. 30, nº 1-3.

Bres, Antoine et Monsarrat, Bruno et Dubourg, Laurent et Birglen, Lionel et Perron, Claude et Jahazi, Mohammad et Baron, Luc. 2010. « Simulation of friction stir welding using industrial robots ». Industrial Robot, vol. 37, nº 1. p. 36-50.
Compte des citations dans Scopus : 19.

Cao, Xinjin et Debaecker, Guillaume et Jahazi, Mohammad et Marya, Surendar et Cuddy, Jonathan et Birur, Anand. 2010. « Effect of post-weld heat treatment on Nd: YAG laser welded Ti-6Al-4V alloy quality ». In THERMEC 2009) Coll. « Materials Science Forum », vol. 638-642. , p. 3655-3660. Trans Tech Publications Ltd.
Compte des citations dans Scopus : 4.

Cao, Xinjin et Jahazi, Mohammad. 2010. « Friction stir welding of dissimilar AA 2024-T3 to AZ31B-H24 alloys ». In THERMEC 2009 Supplement (Berlin, Germany) Coll. « Materials Science Forum », vol. 638-642. , p. 3661-3666. Berlin, Germany : Trans Tech Publications Ltd.
Compte des citations dans Scopus : 12.

Dalgaard, E. et Coghe, F. et Rabet, L. et Jahazi, M. et Wanjara, P. et Jonas, J. J.. 2010. « Texture evolution in linear friction welded Ti-6Al-4V ». In THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009) Coll. « Advanced Materials Research », vol. 89-91. , p. 124-129. Berlin, Germany : Trans Tech Publications.
Compte des citations dans Scopus : 10.

Dubourg, L. et Doran, P. et Larose, S. et Gharghouri, M. A. et Jahazi, M.. 2010. « Prediction and measurements of thermal residual stresses in AA2024-T3 friction stir welds as a function of welding parameters ». In THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009) Coll. « Materials Science Forum », vol. 638-642. , p. 1215-1220. Berlin, Germany : Trans Tech Publications Ltd.
Compte des citations dans Scopus : 10.

Dubourg, L. et Merati, A. et Jahazi, M.. 2010. « Process optimisation and mechanical properties of friction stir lap welds of 7075-T6 stringers on 2024-T3 skin ». Materials and Design, vol. 31, nº 7. p. 3324-3330.
Compte des citations dans Scopus : 86.

Gemme, F. et Verreman, Y. et Dubourg, L. et Jahazi, M.. 2010. « Numerical analysis of the dwell phase in friction stir welding and comparison with experimental data ». Materials Science and Engineering A, vol. 527, nº 16-17. p. 4152-4160.
Compte des citations dans Scopus : 17.

Larose, S. et Dubourg, L. et Perron, C. et Jahazi, M. et Wanjara, P.. 2010. « Limitation of distortion in friction stir welded (FSW) panels using needle peening ». In THERMEC 2009 (Berlin, Germany, Aug. 25-29, 2009) Coll. « Materials Science Forum », vol. 638-642. , p. 1203-1208. Berlin, Germany : Trans Tech Publications Ltd.
Compte des citations dans Scopus : 1.

Vo, P. et Jahazi, M. et Yue, S.. 2010. « FEM modelling of recrystallization behaviour for near-alpha Ti alloy IMI834 ». In THERMEC 2009 Supplement (Berlin, Germany, Aug. 25-29, 2009) Coll. « Advanced Materials Research », vol. 89-91. , p. 592-597. Berlin, Germany : Trans Tech Publications.
Compte des citations dans Scopus : 4.

2009

Cao, X. et Jahazi, M.. 2009. « Effect of welding speed on butt joint quality of Ti–6Al–4V alloy welded using a high-power Nd:YAG laser ». Optics and Lasers in Engineering, vol. 47, nº 11. p. 1231-1241.
Compte des citations dans Scopus : 123.

Cao, X. et Jahazi, M.. 2009. « Effect of welding speed on lap joint quality of AZ31 magnesium alloy ». In Trends in Welding Research 2008: Proceedings of the 8th International Conference (Pine Mountain, GA, USA, June 1-6, 2008), p. 72-80. ASM International.

Cao, X. et Jahazi, M.. 2009. « Effect of welding speed on the quality of friction stir welded butt joints of a magnesium alloy ». Materials and Design, vol. 30, nº 6. p. 2033-2042.
Compte des citations dans Scopus : 98.

Cao, X. et Rivaux, B. et Jahazi, M. et Cuddy, J. et Birur, A.. 2009. « Effect of pre- and post-weld heat treatment on metallurgical and tensile properties of Inconel 718 alloy butt joints welded using 4 kW Nd:YAG laser ». Journal of Materials Science, vol. 44, nº 17. p. 4557-4571.
Compte des citations dans Scopus : 54.

Chamanfar, A. et Jahazi, M. et Yue, S. et Gholipour, J. et Wanjara, P.. 2009. « Linear friction welding behavior of Waspaloy ». In Materials Science and Technology Conference and Exhibition 2009, MS and T'09 (Pittsburgh, PA, USA, Oct. 25-29, 2009), p. 2511-2522. Association for Iron and Steel Technology.

Coman, E. et Ghosh, K. et Jahazi, M. et Dubourg, L.. 2009. « A study of the deformation and residual stress in an aircraft fuselage panel welded by friction stir welding ». International Journal of Advanced Manufacturing System, vol. 11, nº 2. p. 75-84.

Dalgaard, E. et Jahazi, Mohammad et Merati, Ali et Wanjara, P.. 2009. « Mechanical properties of linear friction welded Ti-6-4V alloy ». In XIX International Symposium on Air Breathing Engines 2009 : (ISABE 2009) : Montreal, Canada, 7-11 September 2009 (Montreal, QC, Canada, Sept. 7-11, 2009), p. 1416-1424. American Institute of Aeronautics and Astronautics.

Dubourg, L. et Gholipour, J. et Jahazi, M.. 2009. « Friction stir welding of 2024-T3 aluminum tubes for hydroforming application ». In Trends in Welding Research 2008: Proceedings of the 8th International Conference (Pine Mountain, GA, USA, June 1-6, 2008), p. 549-556. ASM International.
Compte des citations dans Scopus : 5.

Haghshenas, M. et Zarei-Hanzaki, A. et Jahazi, M.. 2009. « An investigation to the effect of deformation-heat treatment cycle on the eutectic morphology and mechanical properties of a Thixocast A356 alloy ». Materials Characterization, vol. 60, nº 8. p. 817-823.
Compte des citations dans Scopus : 13.

Liu, C. et Chen, D. L. et Bhole, S. et Cao, X. et Jahazi, M.. 2009. « Polishing-assisted galvanic corrosion in the dissimilar friction stir welded joint of AZ31 magnesium alloy to 2024 aluminum alloy ». Materials Characterization, vol. 60, nº 5. p. 370-376.
Compte des citations dans Scopus : 74.

Merati, A. et Deronja, J. et Dubourg, L. et Jahazi, M.. 2009. « Friction stir processing technology for the repair of nickel-aluminum bronze ». In Canadian Aeronautics and Space Institute Conference (AERO 2009) (Kanata, ON, Canada, May 5-7, 2009)

Merati, A. et Dubourg, L. et Jahazi, M.. 2009. « Application of FSW technology for additive repair of damaged components ». In RTO-MP-AVT-163 Specialists' Meeting on Additive Technology for Repair of Military Hardware (Bonn, Germany, Oct. 19-22, 2009) NATO Science and Technology Organization.

Wanjara, P. et Jahazi, M.. 2009. « Application of shear punch testing to study microstructure-property relationships in electron beam welded 17-4 PH stainless steel ». Canadian Metallurgical Quarterly, vol. 48, nº 3. p. 317-326.
Compte des citations dans Scopus : 1.

2008

Afrin, N. et Chen, D. L. et Cao, X. et Jahazi, M.. 2008. « Microstructure and tensile properties of friction stir welded AZ31B magnesium alloy ». Materials Science and Engineering A, vol. 472, nº 1-2. p. 179-186.
Compte des citations dans Scopus : 234.

Al-Kazzaz, H. et Medraj, M. et Cao, X. et Jahazi, M.. 2008. « Nd:YAG laser welding of aerospace grade ZE41A magnesium alloy: modeling and experimental investigations ». Materials Chemistry and Physics, vol. 109, nº 1. p. 61-76.
Compte des citations dans Scopus : 38.

Al-Kazzaz, Haider et Cao, Xinjin et Jahazi, Mohammad et Medraj, Mamoun. 2008. « Reliability of laser welding process for ZE41A-T5 magnesium alloy sand castings ». Materials Transactions, vol. 49, nº 4. p. 774-781.
Compte des citations dans Scopus : 4.

Boutana, N. et Bocher, P. et Jahazi, M. et Piot, D. et Montheillet, F.. 2008. « Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method ». Transactions of the Canadian Society for Mechanical Engineering, vol. 32, nº 2. p. 195-213.
Compte des citations dans Scopus : 6.

Boutana, N. et Bocher, Philippe et Jahazi, M. et Piot, D. et Montheillet, F.. 2008. « The microstructural modeling of room temperature creep in titanium alloys using cellular automata model ». International Journal of Microstructure and Materials Properties, vol. 3, nº 4-5. p. 642-653.
Compte des citations dans Scopus : 2.

Cao, X. et Guo, M. et Jahazi, M.. 2008. « Continuous wave ND:YAG laser welding of Ti-6A1-4V titanium alloy ». In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008), p. 197-208. Canadian Institute of Mining Metallurgy & Petroleum.

Cao, X. et Jahazi, M.. 2008. « Overview of friction stir and laser welding techniques for lightweight alloys ». Canadian Welding Association Journal. p. 19-30.

Cao, X. et Jahazi, M. et Afrin, N. et Chen, D. L.. 2008. « Fatigue properties of friction stir welded AZ31B magnesium alloy ». In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008), p. 377-389. Canadian Institute of Mining Metallurgy & Petroleum.

Cao, X. et Jahazi, M. et Al-Kazzaz, H. et Medraj, M.. 2008. « Modelling of work-hardening behaviour for laser welded magnesium alloy ». International Journal of Materials Research, vol. 99, nº 2. p. 216-221.
Compte des citations dans Scopus : 4.

Cao, X. et Jahazi, M. et Fournier, J. et Alain, M.. 2008. « Optimization of bead spacing during laser cladding of ZE41A-T5 magnesium alloy castings ». Journal of Materials Processing Technology, vol. 205, nº 1–3. p. 322-331.
Compte des citations dans Scopus : 12.

Cao, X. et Rivaux, B. et Jahazi, M. C. et Cuddy, J. et Birur, A.. 2008. « Effect of joint gap on Inconel 718 alloy quality welded using 4 kW continuous wave ND:YAG laser ». In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008), p. 313-324. Canadian Institute of Mining Metallurgy & Petroleum.

Cao, X. et Xiao, M. et Jahazi, M. et Fournier, J. et Alain, M.. 2008. « Optimization of processing parameters during laser cladding of ZE41A-T5 magnesium alloy castings using Taguchi method ». Materials and Manufacturing Processes, vol. 23, nº 4. p. 413-418.
Compte des citations dans Scopus : 31.

Dubourg, L. et Amargier, R. et Jahazi, M.. 2008. « Relationship between FSW parameters, hardness and tensile properties of 7075-T6 and 2098-T851 similar but welds ». In 7th International Symposium on Friction Stir Welding : 20-22 May 2008, Japan (Awaji Island, Japan, May 20-22, 2008) TWI Ltd.

Dubourg, L. et Merati, A. et Gallant, M. et Jahazi, M.. 2008. « Manufacturing of aircraft panels by friction stir lap welding of 7075-T6 stringers on 2024-T3 skin: process optimization and mechanical properties ». In 7th International Symposium on Friction Stir Welding : 20-22 May 2008, Japan (Awaji Island, Japan, May 20-22, 2008) TWI Ltd.

Gemme, F. et Verreman, Y. et Dubourg, L. et Jahazi, M.. 2008. « Friction stir welding of 7075 aluminium alloy : finite element modelling of the dwell phase ». In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008), p. 77-86. Canadian Institute of Mining Metallurgy & Petroleum.

Germain, L. et Gey, N. et Humbert, M. et Vo, P. et Jahazi, M. et Bocher, Philippe. 2008. « Texture heterogeneities induced by subtransus processing of near alpha titanium alloys ». Acta Materialia, vol. 56, nº 16. p. 4298-4308.
Compte des citations dans Scopus : 69.

Gholipour, J. et Jahazi, M.. 2008. « Evaluation of lubricants in hydroforming of aerospace materials ». In Plasticity 2008 (Kailua-Kona, HI, USA, Jan. 2-5, 2008)

Lévesque, D. et Dubourg, L. et Lord, M. et Jahazi, M. et Blouin, A.. 2008. « Residual stress measurement in friction stir welds using laser ultrasonics ». In Review of Progress in Quantitative Nondestructive Evaluation: Proceedings of the 35th Annual Review of Progress in Quantitative Nondestructive Evaluation (Chicago, IL, USA, July 22-25, 2008) Coll. « AIP Conference Proceedings », vol. 1096. , p. 1719-1726. AIP Publishing.
Compte des citations dans Scopus : 1.

Lévesque, D. et Dubourg, L. et Mandache, C. et Gougeon, P. et Cao, X. et Jahazi, M. C.. 2008. « Assessment of friction stir welds with nondestructive methods ». In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008), p. 339-350. Canadian Institute of Mining Metallurgy & Petroleum.

Mandache, Catalin et Dubourg, Laurent et Merati, Ali et Jahazi, Mohammad. 2008. « Pulsed eddy current inspection of friction stir welded components ». Materials Evaluation, vol. 66, nº 4. p. 382-387.

Mary, Caroline et Jahazi, Mohammad. 2008. « Multi-scale analysis of IN-718 microstructure evolution during linear friction welding ». Advanced Engineering Materials, vol. 10, nº 6. p. 573-578.
Compte des citations dans Scopus : 38.

Vo, P. et Jahazi, M. et Yue, S.. 2008. « Recrystallization during thermomechanical processing of IMI834 ». Metallurgical and Materials Transactions A, vol. 39, nº 12. p. 2965-2980.
Compte des citations dans Scopus : 46.

Wang, X. et Jahazi, M. et Yue, S.. 2008. « Investigation of α platelet boundaries in a near-α titanium alloy ». Materials Science and Engineering A, vol. 492, nº 1–2. p. 450-454.
Compte des citations dans Scopus : 13.

Wanjara, P. et Jahazi, M.. 2008. « Assessing mechanical property gradients associated with microstructural changes in stainless steel weldments by shear punch testing ». In International Symposium on Recent Developments in Advanced High Strength Steels Processing 2008 : Held at the 47th Conference of Metallurgists (COM) 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008), p. 195-206. Canadian Institute of Mining Metallurgy & Petroleum.

Wanjara, P. et Jahazi, M.. 2008. « Characterization of electron beam welded 17-4 ph stainless steel ». Canadian Metallurgical Quarterly, vol. 47, nº 4. p. 413-436.
Compte des citations dans Scopus : 4.

Wanjara, P. et Poirier, E. et Jahazi, M. C.. 2008. « Manufacture of a strut on a captive trajectory system by electron beam welding ». In 4th International Symposium on Aerospace Materials and Manufacturing Processes: Advances in Processing and Repair of Aerospace Materials 2008 (Winnipeg, MB, Canada, Aug. 24-27, 2008), p. 243-254. Canadian Institute of Mining Metallurgy & Petroleum.

2007

Afrin, N. et Chen, D. L. et Cao, X. et Jahazi, M.. 2007. « Influence of friction stir welding on the tensile behaviour of AZ31B magnesium alloy ». In Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007) Canadian Institute of Mining, Metallurgy and Petroleum.

Afrin, N. et Chen, D. L. et Cao, X. et Jahazi, M.. 2007. « Strain hardening behavior of a friction stir welded magnesium alloy ». Scripta Materialia, vol. 57, nº 11. p. 1004-1007.
Compte des citations dans Scopus : 196.

Boutana, N. et Bocher, Philippe et Jahazi, M. et Piot, D. et Motheillet, F.. 2007. « Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method ». In Proceedings of TI-2007, 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007), p. 267-270. Warrendale, PA, USA : Minerals, Metals and Materials Society.

Cao, X. et Jahazi, M.. 2007. « Applications of laser welding and friction stir welding technologies for joining aerospace magnesium alloys ». In LMT 2007 : proceedings of the Third International Conference on Light Metals Technology : September 24-26, 2007, Saint-Sauveur, Québec, Canada (Saint-Sauveur, QC, Canada, Sept. 24-26, 2007) National Research Council Canada = Conseil national de recherches Canada.

Cao, X. et Jahazi, M.. 2007. « Friction stir processing of sand-cast aerospace magnesium alloy Ze41A-T5 ». In Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007), p. 169-182. Canadian Institute of Mining, Metallurgy and Petroleum.

Cao, Xinjin et Jahazi, Mohammad. 2007. « New analyses of pressure filtration curves of Al alloys: a case study ». In THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006) Coll. « Materials Science Forum », vol. 539-543. , p. 351-356. Vancouver, Canada : Trans Tech Publications Ltd.

Coman, E. et Dubourg, L. et Jahazi, M. et Ghosh, K.. 2007. « A study of the deformation and residual stresses in an aircraft fuselage panel joined by friction stir welding ». In Proceedings of the 23rd ISPE Internaional Conference on CAD/CAM Robotics and Factories of the Future -CARS & FOF'07 (Bogota, Colombia, Aug. 16-18, 2007) Universidad Militar Nueva Granada.

Fairman, M. et Afrin, N. et Chen, D. L. et Cao, X. et Jahazi, M.. 2007. « Microstructural and microhardness evolution of friction stir processing AZ31B-H24 magnesium alloy ». In Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007), p. 117-128. Canadian Institute of Mining, Metallurgy and Petroleum.

Fairman, M. et Afrin, N. et Chen, D. L. et Cao, X. et Jahazi, M.. 2007. « Microstructural evaluation of friction stir processed AZ31B-H24 magnesium alloy ». Canadian Metallurgical Quarterly, vol. 46, nº 4. p. 425-432.
Compte des citations dans Scopus : 23.

Germain, Lionel et Vo, Phuong et Gey, Nathalie et Jahazi, Mohammad et Humbert, Michel et Bocher, Philippe. 2007. « Development of sharp local α microtextures during α/β thermo-mechanical processing of TIMETAL 834 ». In 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007), p. 925-928. Warrendale, USA : Minerals, Metals and Materials Society.

Levesque, D. et Dubourg, L. et Mandache, C. et Kruger, S. E. et Lord, M. et Merati, A. et Jahazi, M. et Monchalin, J-P.. 2007. « Synthetic aperture focusing technique for the ultrasonic evaluation of friction stir welds ». In Review of Progresses in Quantitative Nondestructive Evaluation : 34th Annual Review of Progress in Quantitative Nondestructive Evaluation (Golden, CO, USA, July 22-27, 2007) Coll. « AIP conference proceedings », vol. 975. , p. 263-270. AIP Publishing.
Compte des citations dans Scopus : 2.

Liu, A. et Chen, D. L. et Bhole, S. et Cao, X. et Jahazi, M.. 2007. « Corrosion behavior of the stir zone in friction stir welded dissimilar joint of 2024 aluminium to AZ31 magnesium alloys ». In Light metals in transport applications : COM Toronto 2007 : Conference of Metallurgists, hosting Cu2007 the 6th International Copper/Cobre Conference, August 25-30, 2007 (Toronto, ON, Canada, Ag. 25-30, 2007), p. 129-140. Canadian Institute of Mining, Metallurgy and Petroleum.

Mandache, C. et Merati, A. et Dubourg, L. et Jahazi, M.. 2007. « Pulsed Eddy Current Inspection of friction stir welded components ». In ASNT fall conference and quality testing show 2007 (Las Vegas, NV, USA, Nov. 12-16, 2007) ASNT.

Mary, C. et Jahazi, M.. 2007. « Linear friction welding of IN-718 process optimization and microstructure evolution ». In THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006) Coll. « Advanced Materials Research ». , p. 357-362. Vancouver, BC, Canada : Trans Tech Publications.
Compte des citations dans Scopus : 33.

Uta, E. et Humbert, M. et Gey, N. et Hazotte, A. et Bocher, Philippe et Jahazi, M.. 2007. « Description and characterisation of texture heterogeneitites in titanium alloy Timetal 834 with a bimodal microstructure ». In 11th World Conference on Titanium (Kyoto, Japan, June 3-7, 2007), p. 259-262. Warrendale, USA : Minerals, Metals and Materials Society.

Vo, P. et Jahazi, M. et Yue, S.. 2007. « Recrystallization during Alpha + Beta Processing of IMI834 ». In Proceedings of TI-2007, 11th World Conference on Titanium (Kyoto, Japan, June 1-5, 2007), p. 267-270. Warrendale, PA, USA : Minerals, Metals and Materials Society.

Vo, P. et Jahazi, M. et Yue, S.. 2007. « Recrystallization during beta working of IMI834 ». In THERMEC 2006 Supplement - 5th International Conference on Processing and Manufacturing of Advanced Materials (Vancouver, BC, Canada, July 4-8, 2006) Coll. « Advanced Materials Research ». , p. 965-969. Vancouver, BC, Canada : Trans Tech Publications.
Compte des citations dans Scopus : 2.

Vo, Phuong et Jahazi, M. et Yue, S. et Bocher, Philippe. 2007. « Flow stress prediction during hot working of near-alpha titanium alloys ». Materials Science and Engineering : A, vol. 447, nº 1-2. p. 99-110.
Compte des citations dans Scopus : 76.

W., Cao. et Jahazi, M. et Guerin, M. et Mishra, R. S.. 2007. « Friction stir welding of an aerospace magnesium alloy ». In Friction Stir Welding and Processing IV (Orlando, FL, USA, Feb. 25-Mar. 1, 2007), p. 213-222. Warrendale, PA : The Minerals, Metals & Materials Society.

Wang, X. et Vo, P. et Jahazi, M. et Yue, S.. 2007. « Dwell fatigue microstructure in a near-α titanium alloy ». Metallurgical and Materials Transactions A, vol. 38, nº 4. p. 831-839.
Compte des citations dans Scopus : 8.

Wanjara, P. et Brochu, M. et Jahazi, M.. 2007. « Electron beam freeform fabrication on stainless steel ». In THERMEC 2006 (Vancouver, B.C, Canada, July 4-8, 2006) Coll. « Materials Science Forum », vol. 539-543. , p. 4938-4943. Trans Tech Publications.
Compte des citations dans Scopus : 1.

Wanjara, P. et Brochu, M. et Jahazi, M.. 2007. « Electron beam freeforming of stainless steel using solid wire feed ». Materials and Design, vol. 28, nº 8. p. 2278-2286.
Compte des citations dans Scopus : 41.

Xiao, M. et Poon, C. et Wanjara, P. et Jahazi, M. et Fawaz, Z. et Krimbalis, P.. 2007. « Optimization of Nd-YAG laser welding process for Inconel 718 alloy ». In Progress in Light Metals, Aerospace Materials and Superconductors (Beijing, China, June 25-30, 2006) Coll. « Materials Science Forum », vol. 546-549. , p. 1305-1308. Trans Tech Publications.
Compte des citations dans Scopus : 1.

Xinjin, Cao et Min, Xiao et Jahazi, M. et Shariff, T.. 2007. « Evolution of microstructures during laser surface cladding of magnesium alloy castings using welding wire ». Materials Science Forum, vol. 539-543, nº 2. p. 1735-1740.

2006

Al-Kazzaz, H. et Medraj, M. et Cao, X. et Xiao, M. et Jahazi, M.. 2006. « Effect of laser power and joint gap on weld quality of aerospace grade ZE41A-T5 magnesium alloy using Nd:YAG laser ». In Magnesium technology in the global age : proceedings of the International Symposium on Magnesium Technology in the Global Age, October 1-4, 2006, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 1-4, 2006), p. 503-518. Canadian Institute of Mining, Metallurgy and Petroleum.

Boutana, Nabil et Bocher, Philippe et Jahazi, Mohammad et Piot, D. et Montheillet, F.. 2006. « Utilisation des automates cellulaires pour étudier le comportement en fatigue-fluage des alliages de titane ». In Matériaux 2006 (Dijon, France, 13-17 nov. 2006), p. 781-790.

Cao, X. et Jahazi, M. et Immarigeon, J. P. et Wallace, W.. 2006. « A review of laser welding techniques for magnesium alloys ». Journal of Materials Processing Technology, vol. 171, nº 2. p. 188-204.
Compte des citations dans Scopus : 365.

Cao, X. et Jahazi, M. et Mehta, R.. 2006. « Friction stir welding of AZ31B-H24 magnesium alloy butt joints ». In 6th International Friction Stir Welding Symposium 2006 (Saint-Sauveur, QC, Canada, Oct. 10-13, 2006), p. 279-289. TWI Ltd.

Cao, X. et Xiao, M. et Jahazi, M.. 2006. « Effect of processing parameters on laser cladding of magnesium alloy castings ». In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006), p. 147-158. Canadian Institute of Mining, Metallurgy and Petroleum.

Cao, X. et Xiao, M. et Jahazi, M. et Shariff, T.. 2006. « Surface cladding of magnesium alloy castings using Nd:YAG laser ». In Magnesium technology 2006 : proceedings of the symposium held during the TMS 2006 annual meeting in San Antonio, Texas, USA, March 12-16, 2006 (San Antonio, TX, USA, Mar. 12-16, 2006), p. 359-364. Warrendale, Pa : The Minerals, Metals & Materials Society.

Dubourg, L. et Gagnon, F. O. et Nadeau, F. et St-Georges, L. et Jahazi, M.. 2006. « Process window optimization for FSW of thin and thick sheet Al alloys using statistical methods ». In 6th International Friction Stir Welding Symposium 2006 (Saint-Sauveur, QC, Canada, Oct. 10-13, 2006), p. 419-430. TWI.

Dubourg, L. et Jahazi, M. et Dezaise, G. et Bocher, P.. 2006. « Microstructure and mechanical characterisation of FSW 7075-T6 lap joints ». In Aerospace Materials and Manufacturing: Emerging Materials, Processes, and Repair Techniques (Montréal, Canada, Oct.1-4, 2006), p. 107-120. Canadian Institute of Mining, Metallurgy and Petroleum.

Gholipour, J. et Jahazi, M.. 2006. « Effect of lubricant in hydroforming of Ni-based super alloy tubes ». In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006), p. 447-460. Canadian Institute of Mining, Metallurgy and Petroleum.

Humbert, Michel et Germain, L. et Gey, N. et Bocher, Philippe et Jahazi, M.. 2006. « Study of the variant selection in sharp textured regions of bimodal IMI 834 billet ». Materials Science and Engineering : A, vol. 430, nº 1-2. p. 157-164.
Compte des citations dans Scopus : 42.

Jalilian, F. et Drew, R. A. L. et Jahazi, M.. 2006. « Joining of Inconel 617 sheets using TLP bonding process with Ni-Si-B interlayer ». In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006), p. 315-326. Canadian Institute of Mining, Metallurgy and Petroleum.

Jalilian, F. et Jahazi, M. et Drew, R. A. L.. 2006. « Microstructural evolution during transient liquid phase bonding of Inconel 617 using Ni-Si-B filler metal ». Materials Science and Engineering A, vol. 423, nº 1-2. p. 269-281.
Compte des citations dans Scopus : 42.

Khodabandeh, A. R. et Jahazi, M. et Yue, S. et Aghdashi, S. T.. 2006. « The determination of optimum forging conditions for the production of high strength-high impact toughness automotive parts ». Materials and Manufacturing Processes, vol. 21, nº 1. p. 105-110.
Compte des citations dans Scopus : 15.

Uta, E. et Humbert, M. et Gey, N. et Bocher, P. et Jahazi, M.. 2006. « Mise en évidence et caractérisation des hétérogénéités de textures dans l'alliage de titane IMI 834 de microstructure bimodale à vocation aéronautique ». In Materiaux 2006 : Dijon, 13-17 Novembre 2006 : [recueil de la conference sur CD-ROM] (Dijon, France, 13-17 nov. 2006) Dijon : Université de Bourgogne.

Vo, P. et Yue, S. et Jahazi, M.. 2006. « Microstructure development of a near alpha-titanium alloy during high temperature deformation ». In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006), p. 473-484. Canadian Institute of Mining, Metallurgy and Petroleum.

Wang, X. et Jahazi, M. et Yue, S.. 2006. « Substructure of high temperature compressed titanium alloy IMI 834 ». Materials Science and Engineering A, vol. 434, nº 1-2. p. 188-193.
Compte des citations dans Scopus : 31.

Wanjara, P. et Brochu, M. et Jahazi, M.. 2006. « Thin gauge titanium manufacturing using multiple-pass electron beam welding ». Materials and Manufacturing Processes, vol. 21, nº 5. p. 439-451.
Compte des citations dans Scopus : 15.

Wanjara, Priti et Jahazi, M. et Monajati, H. et Yue, S.. 2006. « Influence of thermomechanical processing on microstructural evolution in near- alloy IMI834 ». Materials Science and Engineering A, vol. 416, nº 1-2. p. 300-311.
Compte des citations dans Scopus : 85.

Xiao, M. et Wanjara, P. et Jahazi, M. et Poon, C.. 2006. « Nd:Yag-laser welding of Inconel 718 alloy ». In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 1-4, 2006), p. 395-412. Canadian Institute of Mining, Metallurgy and Petroleum.

2005

Al-Kazzaz, H. et Medraj, M. et Cao, X. et Jahazi, M. et Min, X.. 2005. « Effect of welding speed on Nd:YAG laser weldability of ZE41A-T5 magnesium sand castings ». In Light metals 2005 : proceedings of the International Symposium on Light Metals, August 21-24, 2005, Calgary, Alberta, Canada (Calgary, AB, Canada, Aug. 21-24, 2005), p. 137-149. Montreal, QC, Canada : Canadian Institute of Mining, Metallurgy and Petroleum.

Bocher, P. et Jahazi, M. et Germain, L. et Gey, N. et Humbert, M.. 2005. « Variant selection in forged titanium alloys : effect of microscopic grain misorientations on the formation of macroscopic regions with similar crystallographic orientations ». In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005), p. 523-530. Montréal, Qué., Canada : École de technologie supérieure.

Bocher, Philippe et Jahazi, Mohammad et Germain, Lionel et Wanjara, Priti et Gey, Nathalie et Humbert, Michel. 2005. « β Microtexture analysis in correlation with hcp textured regions observed in a forged near alpha titanium alloy ». Solid State Phenomena, vol. 105. p. 127-132.
Compte des citations dans Scopus : 3.

Boutana, N. et Bocher, P. et Jahazi, M. et Savoie, J. et Piot, D. et Montheillet, F.. 2005. « Modelling mechanical behaviour of heterogeneous materials using cellular automata : application to some forged titanium alloys ». In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, QC, Canada, Aug. 1-4, 2005), p. 273-280. Montréal, Qué., Canada : École de technologie supérieure.

Cao, X. et Jahazi, M.. 2005. « Estimation of resistance of filter media used for Prefil Footprinter tests of liquid aluminium alloys ». Materials Science and Technology, vol. 21, nº 10. p. 1192-1198.
Compte des citations dans Scopus : 9.

Cao, X. et Jahazi, M.. 2005. « Examination and verification of the filtration mechanism of cake mode during the pressure filtration tests of liquid Al–Si cast alloys ». Materials Science and Engineering A, vol. 408, nº 1–2. p. 234-242.
Compte des citations dans Scopus : 18.

Cao, X. et Xiao, M. et Jahazi, M. et Immarigeon, J. P.. 2005. « Continuous wave ND:YAG laser welding of sand-cast ZE41A-T5 magnesium alloys ». Materials and Manufacturing Processes, vol. 20, nº 6. p. 987-1004.
Compte des citations dans Scopus : 45.

Cao, X. et Xiao, M. et Jahazi, M. et Lin, Y. L.. 2005. « Nd:YAG laser welding of magnesium alloy castings ». In Magnesium Technology 2005: Proceedings of the Symposium Held During the 2005 TMS Annual Meeting in San Francisco, California, U.S.A., February 13-17, 2005 (San Francisco, CA, USA, Feb. 13-17, 2005), p. 441-443. The Minerals, Metals & Materials Society.
Compte des citations dans Scopus : 7.

Germain, L. et Gey, N. et Humbert, M. et Bocher, P. et Jahazi, M.. 2005. « β→-αs variant selection in sharp hcp textured regions of a bimodal IMI834 billet ». Materials Science Forum, vol. 495-497. p. 663-668.
Compte des citations dans Scopus : 4.

Germain, L. et Gey, N. et Humbert, M. et Hazotte, A. et Bocher, P. et Jahazi, M.. 2005. « An automated method to analyze separately the microtextures of primary αp grains and the secondary αs inherited colonies in bimodal titanium alloys ». Materials Characterization, vol. 54, nº 3. p. 216-222.
Compte des citations dans Scopus : 25.

Germain, Lionel et Gey, Nathalie et Humbert, Ludovic et Bocher, Philippe et Jahazi, Mohammad. 2005. « Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet ». Acta Materialia, vol. 53, nº 13. p. 3535-3543.
Compte des citations dans Scopus : 89.

Jalilian, F. et Drew, R. A. L. et Jahazi, M.. 2005. « Joining of Inconel 617 sheets in TLP bonding using Ni - P and Ni - Si - B alloys ». In Trends in Welding Research - Proceedings of the 7th International Conference (Pine Mountain, GA, USA, May 16-20, 2005), p. 873-878. Pine Mountain, GA, United states : ASM International.

Khodabandeh, Ali Reza et Jahazi, Mohammad et Yue, Steve et Bocher, Philippe. 2005. « Impact toughness and tensile properties improvement through microstructure control in hot forged Nb-V microalloyed steel ». ISIJ International, vol. 45, nº 2. p. 272-280.
Compte des citations dans Scopus : 18.

Monajati, H. et Taheri, A. K. et Jahazi, M. et Yue, S.. 2005. « Deformation characteristics of isothermally forged UDIMET 720 nickel-base superalloy ». Metallurgical and Materials Transactions A, vol. 36, nº 4. p. 895-905.
Compte des citations dans Scopus : 80.

Monajati, H. et Zarandi, F. et Jahazi, M. et Yue, S.. 2005. « Strain induced γ′ precipitation in nickel base superalloy Udimet 720 using a stress relaxation based technique ». Scripta Materialia, vol. 52, nº 8. p. 771-776.
Compte des citations dans Scopus : 16.

Wanjara, P. et Booth-Morrison, C. et Hsu, E. et Jahazi, M.. 2005. « Process optimization for linear friction welding of Ti-6Al-4V ». In Trends in welding research : proceedings of the 7th International Conference (Atlanta, GA, USA, May 16-20, 2005) Coll. « ASM Proceedings of the International Conference: Trends in Welding Research ». , p. 855-860. ASM International.

Wanjara, P. et Brochu, M. et Girard, S. et Jahazi, M.. 2005. « Electron beam freeforming on type 321 stainless steel using BNi-2 brazing paste ». Materials Science and Technology, vol. 21, nº 5. p. 613-618.
Compte des citations dans Scopus : 5.

Wanjara, P. et Brochu, M. et Jahazi, M.. 2005. « Ti–6Al–4V electron beam weld qualification using laser scanning confocal microscopy ». Materials Characterization, vol. 54, nº 3. p. 254-262.
Compte des citations dans Scopus : 17.

Wanjara, P. et Jahazi, M.. 2005. « Linear friction welding of Ti-6Al-4V: Processing, microstructure, and mechanical-property inter-relationships ». Metallurgical and Materials Transactions A, vol. 36, nº 8. p. 2149-2164.
Compte des citations dans Scopus : 158.

Wanjara, P. et Jahazi, M. et Monajati, H. et Yue, S. et Immarigeon, J. P.. 2005. « Hot working behavior of near-α alloy IMI834 ». Materials Science and Engineering A, vol. 396, nº 1–2. p. 50-60.
Compte des citations dans Scopus : 148.

Wanjara, P. et Monajati, H. et Jahazi, M. et Germain, L. et Bocher, P. et Immarigeon, J.-P.. 2005. « Deformation processing mechanism and microstructural evolution in a near-alpha titanium alloy ». In Materials science & technology: proceedings of the conference held September 25-28, 2005, Pittsburgh, Pennsylvania USA (Pittsburgh, PA, USA, Sept. 25-28, 2005), p. 15-26. Association for Iron and Steel Technology.

2004

Brochu, M. et Girard, S. et Jahazi, M.. 2004. « Electron beam free forming using brazing paste and solid wires as filler metal ». In Aerospace materials and manufacturing : development, testing, and life cycle issues--honoring William Wallace : proceedings of the Second International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues--Honori (Hamilton, ON, Canada, Aug. 22-25, 2004), p. 323-334. Montreal, Quebec : Canadian Institute of Mining, Metallurgy and Petroleum.

Cao, X. et Xiao, M. et Jahazi, M.. 2004. « Continuous wave Nd: YAG laser welding of ZE41 A-T5 magnesium sand castings: conduction or keyhole mode ». In Aerospace materials and manufacturing : development, testing, and life cycle issues--honoring William Wallace : proceedings of the Second International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues--Honori (Hamilton, ON, Canada, Aug. 22-25, 2004), p. 187-197. Montreal, Quebec : Canadian Institute of Mining, Metallurgy and Petroleum.

Jahazi, M. et Hossein-Nejad, S.. 2004. « The development of an optimum manufacturing and material selection process for the fabrication of labyrinth seal strips ». Journal of Materials Processing Technology, vol. 152, nº 3. p. 272-275.
Compte des citations dans Scopus : 8.

Jalilian, F. et Jahazi, M. et Drew, R. A. L. et Immarigeon, J-P.. 2004. « The influence of processing parameters on TLP joining of Inconel 617 alloy ». In 2nd International Symposium on Aerospace Materials and Manufacturing: Development, Testing, and Life Cycle Issues - Honoring William Wallace (Hamilton, ON, Canada, Aug. 22-25, 2004), p. 263-274. Montreal, Quebec : Canadian Institute of Mining, Metallurgy and Petroleum.

Mashreghi, A. R. et Monajatizadeh, H. et Jahazi, M. et Yue, S.. 2004. « High temperature deformation of nickel base superalloy Udimet 520 ». Materials Science and Technology, vol. 20, nº 2. p. 161-166.
Compte des citations dans Scopus : 23.

Monajati, H. et Jahazi, M. et Bahrami, R. et Yue, S.. 2004. « The influence of heat treatment conditions on gamma characteristics in Udimet 720 ». Materials Science and Engineering A, vol. 373, nº 1-2. p. 286-293.
Compte des citations dans Scopus : 96.

2003

Germain, L. et Gey, N. et Humbert, M. et Bocher, P. et Jahazi, M.. 2003. « Texture and microtexture analysis of an IMI 834 alloy after thermo-mechanical processing ». In Ti-2003 Science and Technology : proceedings of the 10th World Conference on Titanium held at the CCH-Congress Center Hamburg, Germany, 13-18 July 2003 (Hamburg, Germany, July 13-18, 2003), p. 1283-1290. Weinheim, Allemagne : Wiley-VCH.

Jahazi, M. et Samadi, A. et Yue, S.. 2003. « Determination of the optimum forging conditions for a 7075 aluminum alloy ». In Light metals 2003 = Métaux légers : proceedings of the International Symposium on Light Metals 2003 Métaux légers (Vancouver, BC, Canada, Aug. 25-28, 2003), p. 433-444. [Canadian Institute of Mining, Metallurgy and Petroleum].

2002

Jahazi, M. et Jonas, J. J.. 2002. « The non-equilibrium segregation of boron on original and moving austenite grain boundaries ». Materials Science and Engineering A, vol. 335, nº 1-2. p. 49-61.
Compte des citations dans Scopus : 75.

Jahazi, M. et Mashreghi, A. R.. 2002. « Dissolution and precipitation kinetics of γ' in nickel base superalloy Udimet 520 ». Materials Science and Technology, vol. 18, nº 4. p. 458-462.
Compte des citations dans Scopus : 19.

2001

Jahazi, M. et Eghbali, B.. 2001. « The influence of hot forging conditions on the microstructure and mechanical properties of two microalloyed steels ». Journal of Materials Processing Technology, vol. 113. p. 594-598.
Compte des citations dans Scopus : 62.

Jahazi, M. et Khodabandeh, A. et Aghdashi, S. T.. 2001. « A method to improve the toughness of forged microalloyed steels ». In Proceedings of the 9th Conference of Mechanical Engineering ISME 2001 (Rasht, Iran, June 6-9, 2001), p. 3-10.

Shafie, F. K. et Jahazi, M. et Abassi, M.. 2001. « Influence of temperature and percent reduction on aging behavior of T-250 Maraging Steel ». In Proceedings of 4th International Conference on Surface Modifications and Heat Treatment (Isphahan, Iran, May 20-23, 2001), p. 434-441.

Shafie, F. K. et Jahazi, M. et Kharazi, Y. et Abassi, M.. 2001. « Thermomechanical processing of T-250 maraging steel ». In Proceedings of the 9th Conference of Mechanical Engineering ISME 2001 (Rasht, Iran, June 6-9, 2001), p. 41-48.

2000

Aghdashi, S. T. et Khodabandeh, A. et Jahazi, M.. 2000. « The determination of optimum forging condiions for a vanadium containing microalloyed steel ». In The Fourth International Conference on HSLA Steels October 30-November 2, 2000, Xi'an, China (Beijing, China, Oct. 30-Nov. 2, 2000), p. 404-409. The chinese society for metals.

Hossein Nedjad, S. et Jahazi, M.. 2000. « Failure analysis and manufacturing technology of seal strips ». In Proceedings of the 4th International Manufacturing Conference (Tehran, Iran), p. 285-292.

Jahazi, M. et Ebrahimi, G.. 2000. « Influence of flow-forming parameters and microstructure on the quality of a D6ac steel ». Journal of Materials Processing Technology, vol. 103, nº 3. p. 362-366.
Compte des citations dans Scopus : 51.

Jahazi, M. et Egbali, B.. 2000. « Influence of hot rolling parameters on the microstructure and mechanical properties of an ultra-high strength steel ». Journal of Materials Processing Technology, vol. 103, nº 2. p. 276-279.
Compte des citations dans Scopus : 37.

Jahazi, Mohammad et Ghomi, M.. 2000. « Texture evolution in two deep drawn aluminum alloys ». In J.J. Jonas Symposium on Thermomechanical Processing of Steel: August 20-23, 2000, Ottawa, Ontario, Canada (Ottawa, ON, Canada, Aug. 20-23, 2000), p. 707-713. Montreal, QC, Canada : Canadian Institute of Mining, Metallurgy and Petroleum.

Monajati, H. et Jahazi, M. et Hosseini, H.. 2000. « A computer code for the evaluation of the residual life of different boiler components ». In Proceedings of 15th International Power Engineering Conference (Tehran, Iran, June 18-22, 2000), p. 223-231.

Samadi, A. et Jahazi, M.. 2000. « The determination of optimum heat treatment conditions for the forging of a 7075 Al alloy ». In Proceedings of the Second Non-Ferrous Metallurgy Congress, 9-11 May 2000, Univ. of Kerman, Iran (Kerman, Iran, May 9-11, 2000), p. 703-712.

1999

Jahazi, M. et Jalilian, F.. 1999. « The influence of thermochemical treatments on interface quality and properties of copper/carbon-fibre composites ». Composites Science and Technology, vol. 59, nº 13. p. 1969-1975.
Compte des citations dans Scopus : 8.

1998

Jahazi, M.. 1998. « The influence of thermomechanical treatment on the microstructure and mechanical properties of aisi 4130 steel ». Metals and Materials, vol. 4, nº 4. p. 818-822.
Compte des citations dans Scopus : 3.

Jahazi, M. et Ebrahimi, G.. 1998. « Flow localization during the forming of an ultra high strength steel ». In Proceedings of the Sixth Annual ISME Conference, Tehran, Iran, 1998 (Tehran, Iran, 1998), p. 1445-1452.

Monajati, H. et Jahazi, M.. 1998. « Residual life evaluation of critical boiler parts ». In Proceedings of the International IME Conference, Tehran, Iran, 1998 (Tehran, Iran, 1998), p. 757-767.

1997

Jahazi, M. et Ghomi, M.. 1997. « Microstructural evolution and formability in two aluminium alloys ». In Proceedings of the Fifth Annual ISME Conference, Tabriz University, Tabriz, Iran, May 4-6, 1997 (Tabriz, Iran, May 4-6, 1997), p. 757-767.

Jahazi, M. et Goudarzi, M.. 1997. « The influence of thermomechanical parameters on the earing behaviour of 1050 and 1100 aluminium alloys ». Journal of Materials Processing Technology, vol. 63. p. 610-614.
Compte des citations dans Scopus : 4.

Jahazi, M. et Samadi, A.. 1997. « The influence of quench parameters on the microstructure and toughness of AISI 4130 steel ». In Proceedings of the International IME Conference, Tehran, Iran, 1997 (Tehran, Iran, 1997), p. 195-202.

1995

Goudarzi, M. et Jahazi, M. et Fallahi, A.. 1995. « The influence of recrystallization temperature on the earing of a 1100 aluminum alloy ». In Proceedings of the International Manufacturing Conference (Tehran, Iran, 1995), p. 179-186.

Jahazi, M. et Hosseinpour, M.. 1995. « Fracture surface analysis of a welded ultra high strength steel ». The Metallurgist, vol. 3. p. 10-17.

Jahazi, M. et Jalilian, F.. 1995. « The determination of optimum fiber surface treatment for the production of Cu-Gr composites ». In Proceedings of the Conference on Composites Materials (Tokyo, Japan, June 26, 1995), p. 220-228. Japan Society of Mechanical Engineers.

Jahazi, M. et Jalilian, F.. 1995. « The influence of chemical treatments on the interface quality and physical properties of copper-graphite composites ». In Proceedings of the Tenth International Conference on Composite Materials : Whistler, British Columbia, Canada, August 14th-18th, 1995 (Whistler, BC, Canada, Aug. 14-18, 1995), p. 439-446.

1994

Hosseinpour, M. et Jahazi, M.. 1994. « Optimum welding of AISI 4130 steel ». In Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994), p. 214-221.

Hosseinpour, M. et Jahazi, M.. 1994. « The influence of welding parameters on the HAZ microstructure of an ultra high strength steel ». In International Conference on Recent Advances in Materials and Mineral Resources (RAMM '94) : 3-5 May 1994, Penang, Malaysia (Penang, Malaysia, May 3-5, 1994), p. 120-127.

Jalilian, F. et Jahazi, M.. 1994. « The effect of surface treatments on the physical behavior of copper-graphite composites ». In International Conference on Recent Advances in Materials and Mineral Resources (RAMM '94): 3-5 May 1994, Penang, Malaysia (Penang, Malaysia, May 3-5, 1994), p. 326-334.

Jalilian, F. et Sedghi, A. et Jahazi, M.. 1994. « The influence of carbon fiber surface treatment on the mechanism of copper growth ». In Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994), p. 269-274.

Sadeghi, H. et Shariati, M. et Jahazi, M.. 1994. « A computer code for the prediction of forming steps in precision forging ». In Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994), p. 167-174.

1993

Akmoulin, I. A. et Djahazi, M. et Buravova, N. D. et Jonas, J. J.. 1993. « Superplastic forging procedures for manufacture of ceramic yttria stabilised tetragonal zirconia products ». Materials Science and Technology, vol. 9, nº 1. p. 26-33.
Compte des citations dans Scopus : 14.

1992

Djahazi, M. et He, X. L. et Jonas, J. J. et Sun, W. P.. 1992. « Influence of boron on nature and distribution of strain induced precipitates in (Ti,Nb) high strength low alloy steels ». Materials Science and Technology, vol. 8, nº 7. p. 628-636.
Compte des citations dans Scopus : 23.

Djahazi, M. et He, X. L. et Jonas, J. J. et Sun, W. P.. 1992. « Nb(C, N) precipitation and austenite recrystallization ». Metallurgical transactions. A, Physical metallurgy and materials science, vol. 23 A, nº 8. p. 2111-2120.
Compte des citations dans Scopus : 34.

Jalilian, F. et Sedghi, A. et Jahazi, M.. 1992. « The influence of chemical surface treatment on the wettability of carbon fibers ». In Proceedings of the International Confrence on Tribology (Isfahan, Iran, 1992), p. 333-349.

1991

Akmoulin, A. et Djahazi, M. et Jonas, J. J.. 1991. « Effect of initial porosity on the superplastic behavior of Y-TZP in vacuum ». In Superplasticity in advanced materials: proceedings of the International Conference on Superplasticity in Advanced Materials held in Osaka, Japan, June 3-6, 1991 (Osaka, Japan, June 3-6, 1991), p. 233-239. Tokyo, Japan :

Akmoulin, I. A. et Djahazi, M. et Jonas, J. J.. 1991. « Enhanced deformation behavior of incompletely sintered Y-TZP zirconia ». Scripta metallurgica et materialia, vol. 25, nº 5. p. 1035-1040.
Compte des citations dans Scopus : 6.

He, X. L. et Djahazi, M. et Jonas, J. J. et Jackman, J.. 1991. « The non-equilibrium segregation of boron during the recrystallization of Nb-treated HSLA steels ». Acta Metallurgica et Materialia, vol. 39, nº 10. p. 2295-2308.
Compte des citations dans Scopus : 69.

1990

Djahazi, M. et He, X. L. et Jonas, J. J.. 1990. « Acceleration of Nb(C, N) precipitation in HSLA steels by boron addition ». In HSLA steels, processing, properties and applications: proceedings of the Second International Conference on HSLA Steels October 28th-November 2nd, 1990, Beijing, China (Beijing, China, Oct. 28-Nov. 2, 1990), p. 230-238.

Djahazi, M. et He, X. L. et Jonas, J. J. et Collins, L.. 1990. « The effect of Nb and b on austenite recrystallization ». In Recrystallization '90: International Conference on Recrystallization in Metallic Materials: conference proceedings (Wollongong, Australia, Jan. 22-26, 1990), p. 681-687. TMS (The Minerals, Metals & Materials Society).

1988

Djahazi, M. et He, X. L. et Jonas, J. J.. 1988. « Effect of boron on the kinetics of precipitation in deformed austenite ». In Thermec-88: International Conference on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals: proceedings, June 6-10, 1988, Keidanren Kaikan, Tokyo, Japan (Tokyo, Japan, June 6-10, 1988), p. 246-253. Iron and Steel Institute of Japan.

Djahazi, M. et He, X. L. et Jonas, J. J. et Ruddle, G. E.. 1988. « Influence of boron distribution on recrystallization and precipitation in a Nb-Ti HSLA steel ». In Processing, microstructure, and properties of HSLA steels: proceedings of an International Symposium on Processing, Microstructure, and Properties of HSLA Steels (Pittsburgh, PA, USA, Nov. 3-5, 1987), p. 69-78.

1987

Djahazi, M. et He, X. L. et Jonas, J. J.. 1987. « Effect of boron on the precipitation of carbonitrides in a Nb-Ti HSLA steel ». In 29th Mechanical Working and Steel Processing Conference: proceedings (Toronto, ON, Canada, Oct. 21-23, 1987), p. 403-408.

Cette liste a été générée le Thu Nov 15 01:58:02 2018 EST.