ENGLISH
La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS
RECHERCHER

Liste des publications de "Nadeau, Sylvie"

Exporter en format [Atom feed] Atom [RSS feed] RSS 1.0 [RSS2 feed] RSS 2.0
Groupement par Année | Type de document | Sans groupement
Nombre de documents archivés : 331.

Article publié dans une revue, révisé par les pairs

Alexandru, P. et Nadeau, Sylvie. 2004. « Modèle interrelationnel pour l'intégration des aspects de santé et de sécurité à la gestion des opérations dans le travail autonome et polyvalent ». Buletinul Institutului Politehnic Din Iasi, vol. L (LIV), nº fasc. 3-4. pp. 69-72.

Alexandru, Paul et Nadeau, Sylvie. 2007. « Integration of operational, health and safety risks using flow diagrams ». Buletinul Institutului Politehnic Din Iasi, vol. LIII (LVII), nº fasc. 3. pp. 35-42.

Badiane, Abdoulaye, Nadeau, Sylvie, Kenné, Jean-Pierre et Polotski, Vladimir. 2016. « Optimizing production while reducing machinery lockout/tagout circumvention possibilities ». Journal of Quality in Maintenance Engineering, vol. 22, nº 2. pp. 188-201.
Compte des citations dans Scopus : 5.

Badri, A., Nadeau, S. et Gbodossou, A.. 2012. « A mining project is a field of risks: A systematic and preliminary portrait of mining risks ». International journal of safety and security engineering, vol. 2, nº 2. pp. 145-166.
Compte des citations dans Scopus : 24.

Badri, A., Nadeau, S. et Gbodossou, A.. 2013. « A new practical approach to risk management for underground mining project in Quebec ». Journal of Loss Prevention in the Process Industries, vol. 26, nº 6. pp. 1145-1158.
Compte des citations dans Scopus : 50.

Badri, Adel, Gbodossou, André et Nadeau, Sylvie. 2012. « Occupational health and safety risks: Towards the integration into project management ». Safety Science, vol. 50, nº 2. pp. 190-198.
Compte des citations dans Scopus : 58.

Badri, Adel, Nadeau, Sylvie et Gbodossou, André. 2011. « Integration of OHS into risk management in an open-pit mining project in Quebec (Canada) ». Minerals, vol. 1, nº 1. pp. 3-29.
Compte des citations dans Scopus : 18.

Badri, Adel, Nadeau, Sylvie et Gbodossou, André. 2012. « Proposal of a risk-factor-based analytical approach for integrating occupational health and safety into project risk evaluation ». Accident Analysis and Prevention, vol. 48. pp. 223-234.
Compte des citations dans Scopus : 80.

Boudreau-Trudel, Bryan, Nadeau, Sylvie , Zaras, Kazimierz et Deschamps, Isabelle . 2014. « Introduction of innovative equipment in mining: impact on occupational health and safety ». Open Journal of Safety Science and Technology, vol. 4, nº 1. pp. 49-58.

Boudreau-Trudel, Bryan, Nadeau, Sylvie et Zaras, Kazimierz. 2015. « Innovative mining equipment: key factors for successful implementation ». American Journal of Industrial and Business Management, vol. 5, nº 4. pp. 161-171.

Boudreau-Trudel, Bryan, Zaras, Kazimiers, Nadeau, Sylvie et Deschamps, Isabelle. 2014. « Introduction of innovative equipment in mining: impact on productivity ». American Journal of Industrial and Business Management, vol. 4, nº 1. pp. 31-39.

Charlot, E., Kenné, Jean Pierre et Nadeau, Sylvie. 2007. « Optimal production, maintenance and lockout/tagout control policies in manufacturing systems ». International Journal of Production Economics, vol. 107, nº 2. pp. 435-450.
Compte des citations dans Scopus : 22.

Demers, S., Nadeau, Sylvie et Bouzid, Abdel-Hakim. 2011. « Étude analytique des zones critiques du disque intervertébral L5-S1 soumis à une compression quasi statique ». [Résumé d'une communication à une conférence]. Travail et Santé, vol. 27, nº 4. p. 23.

Demers, Sébastien, Bouzid, Abdel-Hakim et Nadeau, Sylvie. 2016. « Effect of Sharpey's fibers on the stress distribution in the anulus fibrosus of an intervertebral disc subjected to compression ». International Review on Modelling and Simulations, vol. 9, nº 6. pp. 414-426.
Compte des citations dans Scopus : 1.

Demers, Sébastien, Bouzid, Abdel-Hakim et Nadeau, Sylvie. 2013. « On the modeling of an intervertebral disc using a novel large deformation multi-shell approach ». Journal of Biomechanical Engineering, vol. 135, nº 5.
Compte des citations dans Scopus : 4.

Demers, Sébastien, Nadeau, Sylvie et Bouzid, Abdel-Hakim. 2017. « Analytical evaluation of stresses and displacements of an intervertebral disc ». Journal of Biomechanical Science and Engineering, vol. 12, nº 3.
Compte des citations dans Scopus : 1.

Demers, Sébastien, Nadeau, Sylvie et Bouzid, Abdel-Hakim. 2016. « Anisotropic multishell analytical modeling of an intervertebral disk subjected to axial compression ». Journal of Biomechanical Engineering, vol. 138, nº 4.
Compte des citations dans Scopus : 1.

Diop, Issa, Nadeau, Sylvie et Emami-Mehrgani, Behnam. 2019. « A mathematical model: A flexible manufacturing system, prone to error, making two products each with stochastic demand schedules ». [Article scientifique]. American Journal of Industrial and Business Management, vol. 9, nº 1. pp. 139-168.

Emami-Mehrgani, Behnam, Kenné, Jean-Pierre et Nadeau, Sylvie. 2013. « Lockout/tagout and optimal production control policies in failure-prone non-homogenous transfer lines with passive redundancy ». International Journal of Production Research, vol. 51, nº 4. pp. 1006-1023.
Compte des citations dans Scopus : 9.

Emami-Mehrgani, Behnam, Nadeau, Sylvie et Kenné, Jean-Pierre. 2011. « Lockout/tagout and operational risks in the production control of manufacturing systems with passive redundancy ». International Journal of Production Economics, vol. 132, nº 2. pp. 165-173.
Compte des citations dans Scopus : 15.

Emami-Mehrgani, Behnam, Nadeau, Sylvie et Kenné, Jean-Pierre. 2014. « Optimal lockout/tagout, preventive maintenance, human error and production policies of manufacturing systems with passive redundancy ». Journal of Quality in Maintenance Engineering, vol. 20, nº 4. pp. 453-470.
Compte des citations dans Scopus : 6.

Emami-Mehrgani, Behnam, Nadeau, Sylvie et Kenné, Jean-Pierre. 2011. « Temps moyen de cadenassage/décadenassage : un outil d’optimisation des politiques de surveillance et de maintenance ». [Résumé d'une communication à une conférence]. Travail et Santé, vol. 27, nº 4. p. 22.

Emami-Mehrgani, Berhnam, Neumann, Patrick W., Nadeau, Sylvie et Bazrafshan, Majid. 2016. « Considering human error in optimizing production and corrective and preventive maintenance policies for manufacturing systems ». Applied Mathematical Modelling, vol. 40, nº 3. pp. 2056-2074.
Compte des citations dans Scopus : 28.

Esouilem, M., Bouzid, H. A. et Nadeau, S.. 2020. « Frequency failure causes analysis of pressure vessel and piping equipment: case study of the Alberta Petrochemical Industry ». ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, vol. 6, nº 4.
Compte des citations dans Scopus : 4.

Esouilhem, Mohamed, Bouzid, Abdel-Hakim et Nadeau, Sylvie. 2022. « Pressure vessels and piping accident analysis and prevention: A case study in Canada ». International Journal of Safety and Security Engineering, vol. 12, nº 1. pp. 105-114.
Compte des citations dans Scopus : 1.

Fatisson, J., Nadeau, Sylvie, Hallé, Stéphane, Viau, C., Camus, M. et Cloutier, Y.. 2013. « A pilot study towards ranking of occupational risk factors emanating from engineered nanoparticle: review of a decade of literature ». International journal of safety and security engineering , vol. 3, nº 4. pp. 241-264.

Fatisson, Julien, Hallé, Stéphane, Nadeau, Sylvie, Ateme-Nguema, Barthélemy, Viau, Claude, Camus, Michel et Cloutier, Yves. 2012. « Towards an integrated and adaptive risk assessment tool for engineered nanoparticles ». International Journal of Theoretical and Applied Nanotechnology, vol. 1, nº 1. pp. 117-123.

Hallé, Stéphane, Nadeau, Sylvie et Fatisson, Julien. 2015. « Engineered containment and control of airborne nanoparticles: current status ». International Journal of Safety and Security Engineering, vol. 5, nº 4. pp. 336-351.
Compte des citations dans Scopus : 2.

Hallé, Stéphane, Nadeau, Sylvie et Rodier, Diane. 2008. « L'intégration de connaissances en santé et sécurité du travail en formation universitaire : Le cas du génie mécanique au Québec ». Hygiène et Sécurité du Travail , vol. 210. pp. 59-63.

Harrabi, Lofti, Dolez, Patricia, Vu-Khanh, Toan, Lara, Jaime, Tremblay, Guy, Nadeau, Sylvie et Larivière, Christian. 2008. « Characterization of protective gloves stiffness: development of a multidirectional deformation test method ». Safety Science, vol. 46, nº 7. pp. 1025-1036.
Compte des citations dans Scopus : 21.

Lagnika, S. B., Nadeau, Sylvie et Ateme-Nguema, B.. 2012. « Intégration des systèmes de gestion des risques liés à la SSTdans les mines souterraines ». [Résumé d'une communication à une conférence]. Travail et Santé, vol. 28, nº 4. p. 20.

Landau, K. et Nadeau, S.. 2020. « Comparison of different parameters of heart rate frequency of tasks performed during aircraft open-basket ground deicing activities ». Ergonomics International Journal, vol. 4, nº 6.

Landau, Kurt, Nadeau, Sylvie, Le Floch, Tiphaine et Morency, François. 2017. « Ergonomic time and motion studies of aircraft de-icing work ». Journal of Ergonomics, vol. 7, nº 4.

Landau, Kurt, Nadeau, Sylvie et LeFloch, Tiphaine. 2018. « Development of the Ergonomic Activity Sampling (EAS) method to analyse video-documented work processes with activity sampling ». Ergonomics International Journal, vol. 2, nº 7.

Larivière, Christian, Tremblay, Guy, Nadeau, Sylvie, Harrabi, Lotfi, Dolez, Patricia, Vu-Khanh, Toan et Lara, Jaime. 2010. « Do mechanical tests of glove stiffness provide relevant information relative to their effects on the musculoskeletal system? : a comparison with surface electromyography and psychophysical methods ». Applied Ergonomics, vol. 41, nº 2. pp. 326-334.
Compte des citations dans Scopus : 15.

Lavoie, Jacques, Marchand, Geneviève, Cloutier, Yves, Hallé, Stéphane, Nadeau, Sylvie, Duchaine, Caroline et Pichette, Gilbert. 2015. « Evaluation of bioaerosol exposures during hospital bronchoscopy examinations ». Environmental Science: Processes & Impacts, vol. 17, nº 2. pp. 288-299.
Compte des citations dans Scopus : 18.

Le Floch, T., Nadeau, S., Morency, F. et Landau, K.. 2021. « Identification of physically fatiguing tasks performed during aircraft open-basket ground de-icing activities ». Work : A Journal of Prevention, Assessment & Rehabilitation, vol. 68, nº 3. pp. 789-796.

Lortie, Monique, Nadeau, Sylvie et Vezeau, Steve. 2016. « Holistic sustainable development: Floor-layers and micro-enterprises ». Applied Ergonomics, vol. 57. pp. 8-16.
Compte des citations dans Scopus : 11.

Melanson, Annick et Nadeau, Sylvie. 2019. « Resilience engineering for sustainable prevention in the manufacturing sector: A comparative study of two methods of risk analysis ». American Journal of Industrial and Business Management, vol. 9, nº 1. pp. 267-281.

Mofidi Naeini, Alimeh et Nadeau, Sylvie. 2022. « STPA systemic approach for OHS and operational risk analysis of data glove use in 4.0 assembly ». CIRP Journal of Manufacturing Science and Technology, vol. 39. pp. 317-331.

Mongrain, D. et Nadeau, Sylvie. 2003. « Groupes de sécurité au travail: revue des résultats nord-américains ». La Gazette du travail, vol. 6, nº 1. pp. 76-91.

Morency, François et Nadeau, Sylvie. 2014. « Maintenance d'aéronefs: génie des facteurs humains du dégivrage ». [Résumé d'une communication à une conférence]. Travail et Santé, vol. 30, nº 1. p. 24.

Nadeau, S., Bruder, R. et Hof, L.. 2021. « Using Smart Glasses in assembly/disassembly: Current state of the art ». Travail et Santé, vol. 37, nº 2. pp. 2-6.

Nadeau, S. et Landau, K.. 2018. « Utility, advantages and challenges of digital technologies in the manufacturing sector ». Ergonomics International Journal, vol. 2, nº 12.

Nadeau, S., Salmanzadeh, H., Ahmadi, M. et Landau, K.. 2019. « Aviation deicing workers, global risk assessment of musculoskeletal injuries ». International Journal of Industrial Ergonomics, vol. 71. pp. 8-13.
Compte des citations dans Scopus : 6.

Nadeau, Sylvie. 2003. « Cooperation in health and safety : a game theory analysis ». Pierce Law Review, vol. 1, nº 3-4. pp. 219-227.

Nadeau, Sylvie. 2017. « Lean, Six Sigma and Lean Six Sigma in higher education: a review of experiences around the world ». American Journal of Industrial and Business Management, vol. 7, nº 5. pp. 591-603.

Nadeau, Sylvie, Bouchard, Michèle, Debia, Maximilien, DeMarcellis-Warin, Nathalie, Hallé, Stéphane, Songmene, Victor, Therrien, Marie-Christine, Wilkinson, Kevin, Ateme-Nguema, Barthelemy, Dufour, Genevieve, Dufresne, André, Fatisson, Julien, Haddad, Sami, Hadioui, Madjid, Kouam, Jules, Morency, François, Tardif, Robert, Viens, Martin, Weichenthal, Scott, Viau, Claude et Camus, Michel. 2013. « EquiNanos: innovative team for nanoparticle risk management ». Nanomedicine : Nanotechnology, Biology and Medicine, vol. 9, nº 1. pp. 22-24.
Compte des citations dans Scopus : 1.

Nadeau, Sylvie, Bouzid, Hakim et Prud’homme, David. 2008. « Étude du mécanisme lésionnel de la hernie discale : modélisation du comportement élastique non linéaire ». Revue Internationale sur l’Ingénierie des Risques Industriels, vol. 1, nº 1. pp. 46-64.

Nadeau, Sylvie, Fatisson, J., Badri, A. et Emami-Mehrgani, B.. 2013. « From serious shortage of researchers to OHS law changes and growing industrial needs: a dynamic and quiet force ». Relations Industrielles / Industrial Relations, vol. 68, nº 4. pp. 608-622.

Nadeau, Sylvie, Gilbert, R. et Leblanc, D.. 2004. « Is the accident hypothesis valid in the occupational low back pain and injuries issue? ». Buletinul Institutului Politehnic Din Iasi, vol. L (LIV), nº fasc.3-4. pp. 63-68.

Nadeau, Sylvie, Gilbert, R. et Leblanc, D.. 2004. « The accident hypothesis as the basic hypothesis for the identification of low back injury risk factors ». Buletinul Institutului Politehnic Din Iasi, vol. L (LIV), nº fasc. 3-4. pp. 55-62.

Nadeau, Sylvie, Hallé, Stéphane, Viau, Claude et Cloutier, Yves. 2012. « Call for the development of an adaptative tool for assessing human health posed by engineered nanoparticle risk ». International journal of safety and security engineering, vol. 2, nº 1. pp. 40-53.
Compte des citations dans Scopus : 2.

Nadeau, Sylvie, Julien, B. et Arteau, Jean. 2008. « When system reliability techniques are used to audit manufacturing suppliers in occupational health and safety ». Buletinul Institutului Politehnic Din Iasi, vol. LIV (LVIII), nº fasc. 3-4. pp. 55-61.

Nadeau, Sylvie, Kenné, Jean-Pierre et Alexandru, Paul. 2010. « Modeling the integration of occupational health and safety risks with operational risks associated with autonomous and multi-skilled work performed in uncertain environments ». Revue Internationale sur l’Ingénierie des Risques Industriels, vol. 3, nº 1. pp. 17-31.

Nadeau, Sylvie, Kenné, Jean-Pierre, Emami-Mehrgani, Behnam et Badri, Adel. 2016. « Advances in integration of equipment lockout/tagout, determination of actual production capacity and production/maintenance planning ». Safety Science Monitor, vol. 19, nº 2.

Nadeau, Sylvie et Landau, Kurt. 2017. « Industrie 4.0 : Êtes-vous prêts (es)? ». Travail et Santé, vol. 33, nº 2. p. 30.

Nadeau, Sylvie et Landau, Kurt. 2017. « Towards dynamic and adaptive allocation of staff in a digital-organised production context: an innovative perspective from work science ». Journal of Ergonomics, vol. 7, nº 4.

Nadeau, Sylvie, Leblanc, D., Gilbert, R. et Arteau, Jean. 2004. « The partnership approach ». Buletinul Institutului Politehnic Din Iasi, vol. L (LIV), nº fasc. 3-4. pp. 47-54.

Nadeau, Sylvie et Morency, François. 2017. « De-icing of aircraft : incorporating business risks and occupational health and safety ». International Journal of Safety and Security Engineering, vol. 7, nº 2. pp. 247-266.
Compte des citations dans Scopus : 4.

Naeini, Alimeh Mofidi et Nadeau, Sylvie. 2022. « Application of FRAM to perform risk analysis of the introduction of a data glove to assembly tasks ». Robotics and Computer-Integrated Manufacturing, vol. 74.
Compte des citations dans Scopus : 3.

Naeini, Alimeh Mofidi et Nadeau, Sylvie. 2022. « Comparing FRAM and STAMP for occupational health and safety (OHS) and operational risks analysis: The case of data gloves in assembly 4.0 production ». [Résumé d'une communication à une conférence]. Safety and Health at Work, vol. 13. S89.

Naeini, Alimeh Mofidi et Nadeau, Sylvie. 2023. « Proposed integrated FRAM/STPA risk analysis of data gloves in assembly 4.0 system ». Robotics and Computer-Integrated Manufacturing, vol. 81.

Nemati, Ali, Nadeau, Sylvie et Ateme-Nguema, Barthélémy. 2019. « Lean mining, productivity and occupational health and safety: An expert-elicitation study ». American Journal of Industrial and Business Management, vol. 9, nº 11. pp. 2034-2049.

Ngô, Valérie Tuyêt Mai, Nadeau, Sylvie et Hallé, Stéphane. 2017. « Ergonomic design of a cooling vest in deep and ultra-deep mining environments ». Occupational Ergonomics, vol. 13, nº S1. pp. 115-126.
Compte des citations dans Scopus : 8.

Sakouhi, Amine et Nadeau, Sylvie. 2016. « Integration of occupational health and safety into lean manufacturing: Quebec aeronautics case study ». American Journal of Industrial and Business Management, vol. 6, nº 11. pp. 1019-1031.

Slim, Hussein et Nadeau, Sylvie. 2020. « A mixed rough sets/fuzzy logic approach for modelling systemic performance variability with FRAM ». Sustainability, vol. 12, nº 5.
Compte des citations dans Scopus : 12.

Slim, Hussein et Nadeau, Sylvie. 2019. « A proposal for a predictive performance assessment model in complex sociotechnical systems combining fuzzy logic and the Functional Resonance Analysis Method (FRAM) ». American Journal of Industrial and Business Management, vol. 9, nº 6. pp. 1345-1375.

Slim, Hussein et Nadeau, Sylvie. 2020. « A proposition for combining rough sets, fuzzy logic and FRAM to address methodological challenges in safety management: A discussion paper ». Safety, vol. 6, nº 4.
Compte des citations dans Scopus : 2.

Tiaya Tedonchio, Christian, Nadeau, Sylvie, Boton, Conrad et Rivest, Louis. 2022. « Digital mock-ups as support tools for preventing risks related to energy sources in the operation stage of industrial facilities through design ». Results in Engineering, vol. 16.
Compte des citations dans Scopus : 1.

Torres, Yaniel, Nadeau, Sylvie et Landau, Kurt. 2022. « Applying AcciMap and STAMP to the analysis of human error in complex manual assembly ». Human Factors and Ergonomics in the Manufacturing and Service Industries, vol. 32, nº 6. pp. 462-481.
Compte des citations dans Scopus : 5.

Torres, Yaniel, Nadeau, Sylvie et Landau, Kurt. 2021. « Classification and quantification of human error in manufacturing: A case study in complex manual assembly ». Applied Sciences, vol. 11, nº 2.
Compte des citations dans Scopus : 29.

Torres, Yaniel, Nadeau, Sylvie et Landau, Kurt. 2021. « Evaluation of fatigue and workload among workers conducting complex manual assembly in manufacturing ». IISE Transactions on Occupational Ergonomics and Human Factors, vol. 9, nº 1. pp. 49-63.
Compte des citations dans Scopus : 7.

Torres, Yaniel, Nadeau, Sylvie et Morency, François. 2016. « Study of fatigue and workload among aircraft de-icing technicians ». Occupational Ergonomics, vol. 13, nº 2. pp. 79-90.
Compte des citations dans Scopus : 6.

Trudel, B., Nadeau, Sylvie, Zaras, K. et Deschamps, I.. 2013. « L'innovation dans le domaine minier: impacts et gestion ». [Résumé d'une communication à une conférence]. Travail et Santé, vol. 29, nº 2. p. 22.

Trudel, Bryan, Nadeau, Sylvie, Zaras, Kazimierz et Deschamps, Isabelle. 2015. « Managing equipment innovations in mining: A review ». Work, vol. 51, nº 4. pp. 731-746.
Compte des citations dans Scopus : 7.

Tuyêt Mai Ngô, Valérie, Nadeau, Sylvie et Hallé, Stéphane. 2020. « Validation of ergonomic criteria of a cooling vest for deep and ultra-deep mining ». International Journal of Industrial Ergonomics, vol. 78.
Compte des citations dans Scopus : 5.

Compte rendu de conférence

Alexandru, P. et Nadeau, Sylvie. 2005. « Intégration des aspects de santé et de sécurité à la gestion des opérations dans le travail autonome et polyvalent en environnement incertain ». In La SST: de la pratique à l'intégration-- un défi! : 27e congrès AQHSST, 17, 18, 19 mai 2005, Hôtel des Seigneurs, Saint-Hyacinthe : résumés des conférences (Saint-Hyacinthe, QC, Canada, 17-19 mai, 2005) Association québécoise pour l'hygiène, la santé et la sécurité du travail.

Alexandru, Paul et Nadeau, Sylvie. 2007. « Considerations of integration of the risks of work using the diagram of flow ». In 6e Congrès International de Sciences des Matériaux et d’Ingénierie (Iasi, Roumania, May 24-27, 2007) pp. 35-42.

Arteau, Jean, Nadeau, Sylvie, Ngô, Anh Dung et Rivet, Pierre. 2005. « La santé et la sécurité du travail en milieu universitaire: des choix proactifs ». In Colloque la santé et la sécurité du travail au Québec : de la recherche à la pratique : 11 mai 2005 à l'Université du Québec à Chicoutimi dans le cadre du 73e congrès de l'Acfas (Chicoutimi, QC, Canada, 10-15 mai 2005) Chicoutimi, QC, Canada : Réseau de recherche en santé et en sécurité du travail du Québec.

Ateme-Nguema, B., Nadeau, Sylvie et Arts, A.. 2009. « Integration of health and safety with operational risks: an overview on cells manufacturing ». In 17th World Congress on Ergonomics : August 9-14, 2009, Beijing, China (Beijing, China, Aug. 9-14, 2009) Beijing, China : International Ergonomics Association.

Aventin, Agathe, Morency, François et Nadeau, Sylvie. 2015. « Statistical study of aircraft accidents and incidents related to de/anti-icing process in Canada between 2009 and 2014 ». In 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference. Abstract book (Montreal, QC, Canada, May 19-21, 2015) pp. 201-209.

Ayache, A., Morency, François et Nadeau, Sylvie. 2013. « Fatigue assessment of workers responsible for deicing aircrafts on the ground and its effects on their performance ». In CASI 60th Aeronautics Conference and AGM, Aèro 13 (Toronto, ON, Canada, Apr. 30-May 2, 2013) Ottawa, ON, Canada : Canadian Aeronautics and Space Institute.

Badri, A., Nadeau, Sylvie et Gbodossou, A.. 2011. « A new paradigm for integrating occupational health and safety into project risk evaluation ». In Dokumentation des 57. Arbeitswissenschaftlichen Kongresses in Chemnitz [Documentation of the 57th Work Scientific Congress in Chemnitz ] (Chemnitz, Allemagne , Mar. 23-25, 2011) pp. 123-128. Dortmund : GfA-Press.

Badri, A., Nadeau, Sylvie et Gbodossou, A.. 2011. « Gérer les risques de santé et de sécurité du travail : une nouvelle démarche appliquée à un projet minier québécois ». In 33e Congrès de l’AQHSST (Trois-Rivières, QC, Canada, 11-13 mai 2011)

Badri, A., Nadeau, Sylvie et Gbodossou, A.. 2012. « Overcoming the OHS risks of a mining project : case of an new open-pit mine in Quebec ». In Gesellschaft für Arbeitswissenschaft (Kassel, Allemagne, Feb. 22-24, 2012) pp. 153-157.

Badri, A., Nadeau, Sylvie et Gbodossou, A.. 2012. « Une nouvelle approche multidisciplinaire pour intégrer la SST dans la gestion des risques d'un projet minier ». In 34e congrès de l’AQHSST (Gatineau, QC, Canada, 16-18 mai 2012) Bromont, QC, Canada : Association québécoise pour l’hygiène, la santé et la sécurité du travail.

Badri, Adel, Nadeau, Sylvie et Gbodossou, André. 2010. « Intégrer les risques de santé et de sécurité du travail dans la gestion des projets industriels ». In 32e Congrès de l'Association Québécoise pour l'Hygiène, la Santé et la Sécurité du Travail (Lévis, Québec, Canada, 12-14 mai 2010)

Benabderrahmane, M. C., Nadeau, Sylvie et Badri, A.. 2014. « Safety and sustainability in mining industry ». In Kongress der Gesellschaft für Arbeitswissenschaften - Gestaltung der Arbeitswelt der Zukunft (Munich, Germany, Mar. 12-14, 2014) pp. 421-423. Dortmund, Germany : GfA-Press.

Bertrand, E., Quesnel, S., Nadeau, Sylvie, Rebouillat, L., Vigeant, M., Leblanc, D. et Rigaud, M.. 1996. « Impacts stratégiques de nouvelles technologies: cas d'un dégazeur dans une acierie ». In 64e Congrès de l'ACFAS, 13-17 mai 1996, Université McGill, Montréal (Montréal, QC, Canada, 13-17 mai 1996) Montréal, QC, Canada :

Boudreau-Trudel, B., Nadeau, Sylvie, Zaras, K. et Deschamps, I.. 2013. « Les facteurs clés pour la réussite d'une implantation d'innovation minière ». In 35e congrès de l'AQHSST (Bromont, QC, Canada, 1-3 mai 2013)

Boudreau-Trudel, B., Nadeau, Sylvie, Zaras, K. et Deschamps, Isabelle. 2012. « The impact of new technology in mining equipment on productivity and OHS performance ». In NES 2012, 44th Annual International Nordic Ergonomics and Human Factors Society Conference (Stockholm, Sweden, Aug. 19-22, 2012)

Boudreau-Trudel, B., Nadeau, Sylvie, Zaras, K. et Deschamps, Isabelle. 2012. « The importance of identifying factors determining successful implementation of innovation in mining: a review of the literature on the impact of technological innovation on productivity and OHS performance ». In Gesellschaft für Arbeitswissenschaft (Kassel, Allemagne, Feb. 22-24, 2012) pp. 53-56.

Boudreau-Trudel, Bryan, Nadeau, Sylvie et Zaras, Kazimierz. 2015. « Introduction of mining equipment: key factors for sustainable development ». In The Proceedings of the 19th Triennial Congress of the International Ergonomics Association. Melbourne, 9-14 August, 2015 (Melbourne, Australia, Aug. 9-14, 2015) International Ergonomics Association.

Boudreau-Trudel, Bryan, Zaras, Kazimierz, Nadeau, Sylvie et Deschamps, Isabelle. 2014. « Les facteurs de réussite dans l'implantation de projets d'équipement minier innovant ». In IV International Conference on Regional and Local Projects - the Role of Competencies (Katowice, Pologne, 10-11 juin 2014)

Camara, D., Nadeau, S. et Echchakoui, S.. 2015. « Perceptions des mineurs de mines ultraprofondes ». In 37e Congrès AQHSST (Saint-Sauveur, QC, Canada, 20-22 mai 2015)

Charlot, E., Kenné, Jean-Pierre et Nadeau, Sylvie. 2005. « Optimal production and lockout/tagout control policies in manufacturing systems ». In 4th International Conference Safety of Industrial Automated Systems (SIAS) (Chicago, IL, USA, Sept. 26-28, 2005)

Demers, S., Bouzid, Hakim et Nadeau, Sylvie. 2012. « Stress analysis of the intervertebral disc using a developed multi-shell model ». In Twelfth Pan American Congress of Applied Mechanics (PACAM XII) (Trinidad, Spain, Jan. 2-6, 2012)

Demers, S., Nadeau, Sylvie et Bouzid, Hakim. 2013. « On the use of multishell theory to model herniated discs ». In Dokumentation des 59. Arbeitswissenschaftlichen Kongresses Krefeld 27.02.-01.03.2013 (Krefeld, Germany, Feb. 27-Mar. 1, 2013) pp. 371-374. Dortmund, Germany : GfA-Press.

Demers, Sébastien, Bouzid, Abdel-Hakim et Nadeau, Sylvie. 2012. « Analytical and finite element multi-shell modelling of an intervertebral disc ». In ASME 2012 Pressure Vessels and Piping Conference, PVP 2012 (Toronto, ON, Canada, July 15-19, 2012) pp. 25-36. New York, N.Y., USA : American Society of Mechanical Engineers.

Demers, Sébastien, Bouzid, Abdel-Hakim et Nadeau, Sylvie. 2013. « Développement d'un modèle analytique pour l'étude des contraintes d'un disque intervertebral soumis à une compression axiale ». In CIRI 2013, 3ème Congrès international sur l'ingénierie des risques industriels (Reims, France, 3-5 juil. 2013) Reims, France : Université de Reims Champagne-Ardenne.

Demers, Sébastien, Bouzid, Hakim A. et Nadeau, Sylvie. 2010. « La hernie discale: mieux la comprendre pour mieux la prévenir ». In Congrès AQHSST 2010 (Lévis, QC, Canada, 12-14 mai 2010) Association québécoise pour l'hygiène, la santé et la sécurité du travail.

Demers, Sébastien, Nadeau, Sylvie et Bouzid, Hakim. 2013. « Analytical anisotropic multi-shell model of a simplified intervertebral disc subjected to axial compression ». In ASME 2013 Summer Bioengineering Conference (SBC) (Sunriver, OR, USA, June 26-29, 2013) New York, NY, USA : American Society of Mechanical Engineers.

Demy, F., Nadeau, Sylvie et Kenné, Jean-Pierre. 2015. « Integration of production planning, scheduling and lockout/tagout activities in a manufacturing system ». In Gesellschaft für Arbeitswissenschaft (Karlsruhe, Germany, Feb. 25-27, 2015)

Diop, I., Nadeau, S. et Emami-Mehrgani, B.. 2017. « Human error, optimal production control policies and corrective maintenance with lockout-tagout ». In Applied Human Factors and Ergonomics Conferrence (AHFE) (Los Angeles, CA, USA, July 17-21, 2017)

Emami-Mehrgani, B., Kenné, Jean-Pierre et Nadeau, Sylvie. 2012. « Lockout/tagout and human error in production control of manufacturing systems with passive redundancy ». In Gesellschaft für Arbeitswissenschaft (Kassel, Allemagne, Feb. 22-24, 2012) pp. 623-627.

Emami-Mehrgani, B., Nadeau, Sylvie et Kenné, Jean-Pierre. 2011. « Optimisation des politiques de surveillance par le biais du cadenassage/décadenassage ». In 33e Congrès de l’AQHSST (Trois-Rivières, QC, Canada, 11-13 mai 2011)

Emami-Mehrgani, B., Nadeau, Sylvie et Kenné, Jean-Pierre. 2012. « Réduction des coûts de production des systèmes manufacturiers sujets aux activités de cadenassage/décadenassage ». In 34e congrès de l’AQHSST (Gatineau, QC, Canada, 16-18 mai 2012) Bromont, QC, Canada : Association québécoise pour l’hygiène, la santé et la sécurité du travail.

Emami-Mehrgani, Behnam., Nadeau, Sylvie et Kenné, Jean-Pierre. 2011. « Lockout/tagout and operational risks in the production control of a transfer line with passive redundancy ». In ASME International mechanical engineering congress and exposition (IMECE) (Denver, CO, USA, Nov. 11-17, 2011) pp. 745-752. ASME.

Emami-Mehrgani, Behnam, Nadeau, Sylvie et Kenné, Jean-Pierre. 2010. « Integrating lockout/tagout with operational risks : the passive redundancy case ». In 56 Kongress der Gesellschaft für Arbeitswissenschaft (GFA) (Darmstadt, Germany, Mar. 24-26, 2010) pp. 475-482.

Esouilem, Mohamed, Bouzid, Abdel-Hakim et Nadeau, Sylvie. 2019. « Accident causes involving pressure vessels: A case study analysis with STAMP model ». In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Dresden, Germany, Feb. 27-Mar. 1, 2019) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 65. Dortmund : GfA-Press.

Esouilem, Mohamed, Bouzid, Abdel-Hakim et Nadeau, Sylvie. 2019. « Safety and risk management analysis of accidents related to pressure vessels and piping in Alberta petrochemical industry from 2008 to 2017 ». In Pressure Vessels and Piping Conference (PVP) 2019 (San Antonio, TX, USA, July 14-19, 2019) ASME.

Fatisson, Julien, Hallé, Stéphane et Nadeau, Sylvie. 2012. « Towards an integrated and adaptive risk assessment tool for engineered nanoparticles ». In 3rd International Conference on Nanotechnology: Fundamentals and Applications (Montréal, QC, Canada, Aug. 7-9, 2012)

Günebak, S., Nadeau, S., Morency, F. et Straeter, O.. 2017. « Analysis of eye-tracking dynamics in aircraft ground deicing ». In 63rd Aeronautics Conference (CASI-AERO) (Toronto, ON, Canada, May 16-18, 2017) Canadian Aeronautics and Space Institute.

Günebak, Servet, Nadeau, Sylvie, Morency, François et Sträeter, Oliver. 2016. « Aircraft ground deicing as a complex sociotechnical system: towards a safer and more efficient communication process for aircraft ground deicing ». In Frühjahrskongress : Arbeit in komplexen Systemen. Digital, vernetzt, human?! (Aachen, Germany, Mars 2-4, 2016) Gesellschaft für Arbeitswissenschaft.

Günebak, Servet, Nadeau, Sylvie, Morency, François et Sträter, Oliver. 2015. « Towards a safer and more efficient communication process for aircraft ground deicing: review of human factors and team communication literature ». In 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference. Abstract book (Montreal, QC, Canada, May 19-21, 2015) pp. 189-199.

Hallé, Stéphane, Fatisson, Julien, Nadeau, Sylvie et Vinches, Ludwig. 2015. « Cooling technologies for reducing thermal constraints in deep under-ground mines : OHS challenges ». In The Proceedings of the 19th Triennial Congress of the International Ergonomics Association. Melbourne, 9-14 August, 2015 (Melbourne, Australia, Aug. 9-14, 2015) International Ergonomics Association.

Jafflin, Aurélie et Nadeau, Sylvie. 2020. « Identifying OHS hazards in university research laboratories from an ergonomics and human factors perspective ». In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Berlin, Germany, March 16-18, 2020) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft » Dortmund : GfA-Press.

Julien, B., Nadeau, Sylvie, Voyer, N. et Roy, Claude. 2005. « The use of logic trees to evaluate corporate performance in ergonomics, health and safety ». In Contemporary Ergonomics 2005 (Hatfield, United Kingdom, Apr. 5-7, 2005) pp. 318-321. UK : Taylor & Francis.

Karevan, Ali et Nadeau, Sylvie. 2023. « The role of industry 5.0 in reducing the risk of human error in manufacturing- a critical literature review ». In CIGI Qualita MOSIM : Propulser la performance - Interconnectivité et collaboration dans un contexte d'intelligence artificielle (Trois-Rivières, QC, Canada, June 14-16, 2023)

Khoddammhoammadi, Nasim, Ngô, Valerie Tuyet Mai et Nadeau, Sylvie. 2023. « Integrating smart glasses in a hybrid manufacturing system: Towards a better understanding of impacts on productivity, quality and ergonomics/human factors ». In CIGI Qualita MOSIM : Propulser la performance - Interconnectivité et collaboration dans un contexte d'intelligence artificielle (Trois-Rivières, QC, Canada, June 14-16, 2023)

Lagnika, S. B., Nadeau, Sylvie et Ateme-Nguema, B.. 2012. « Intégration des risques opérationnels aux risques de SST dans les mines: une révolution de la culture de sécurité? ». In 80e du Congrès de l'Acfas (Montréal, QC, Canada, 7-11 mai 2012)

Landau, Kurt, Nadeau, Sylvie, Le Floch, Tiphaine et Morency, François. 2018. « Arbeitsprozesse und Wertschöpfungsbeiträge bei der Flugzeug-Enteisung ». In Gesellschaft für Arbeitswissenschaft (Francfort, Allemagne, Fev. 21-23, 2018) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 64. GFA Press.

Landau, Kurt, Nadeau, Sylvie, Salmanzadeh, Hamed et Abendroth, Bettina. 2021. « „Große Arbeitsobjekte“ in Flugzeugbau und -wartung ». In Herbstkonferenz der Gesellschaft für Arbeitswissenschaft : Zeitbezug und Transformation – Ergonomie im Wandel des Fortschritts (Friedrichshafen, Germany, Sept. 23-24, 2021) Dortmund : GFA Press.

Lavoie, J., Marchand, G., Cloutier, Y., Hallé, S., Nadeau, S., Duchaine, C. et Pichette, G.. 2014. « Evaluation of bioaerosol exposures during hospital bronchoscopy examinations ». In AIRMON 2014: 8th International Symposium on Modern Principles for Air Monitoring and Biomonitoring (Marseille, France, 15-19 juin 2014) Cambridge, UK : Royal Society of Chemistry.

Le Floch, Tiphaine, Nadeau, Sylvie, Landau, Kurt et Morency, François. 2018. « Aircraft deicing in open baskets: Study of the effects of activities on heart rate variability ». In Gesellschaft für Arbeitswissenschaft (Francfort, Allemagne, Fev. 21-23, 2018) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 64. GFA Press.

Lescure, Eric, Nadeau, Sylvie et Morency, François. 2015. « PME et SST : Quand la résilience est un modèle d’affaires ». In 50ème congrès de la Société d'Ergonomie de Langue Française (Paris, France, 23-25 sept. 2015) SELF.

Lortie, M., Vezeau, S., Gowings, T., Fatisson, J., Nadeau, Sylvie, Kefi, I. et Chaouch, F.. 2014. « Holistic sustainable development : Floor-laying workers’ case ». In 11th International Symposium on Human Factors invOrganisational Design and Management (ODAM) & 46th Annual Nordic Ergonomics Society Conference (NES) (Copenhagen, Denmark, Aug. 17-20, 2014)

Manolache, Constantin T., Arteau, Jean, Nadeau, Sylvie et Wakula, Jurij. 2012. « Lean construction and occupational health and safety risks in construction project management : the case of ironworkers: a short literature review ». In Frühjahrskongress 2012 der Gesellschaft für Arbeitswissenschaft GfA (Kassel, Allemagne, Feb. 22-24, 2012) pp. 57-61. Dortmund : GfA-Press.

Manolache, Constantin T., Nadeau, Sylvie et Arteau, Jean. 2010. « Social sustainability through occupational health and safety prevention in the construction industry ». In Dokumentation des 56. Arbeitswissenschaftlichen Kongresses Darmstadt 24.03.-26.03.2010 (Darmstadt, Germany, Mar. 24-26, 2010) pp. 441-444. Dortmund, Germany : GfA-Press.

Mansour, Malek, Nadeau, Sylvie et Kenné, Jean-Pierre. 2009. « Management and planning of lockout operations : the case of a high volume packing line ». In Arbeit, Beschäftigungsfähigkeit und Produktivität im 21. Jahrhundert : Bericht zum 55. Kongress der Gesellschaft für Arbeitswissenschaft vom 4. - 6. März 2009 [an der Technischen Universität Dortmund] (Dortmund, Germany, Mar. 4-6, 2009) pp. 547-551. Dortmund : GFA-Press.

Marquis, B., Nadeau, Sylvie et Morency, François. 2014. « Impacts of lean management on occupational health and safety in aircraft maintenance ». In Kongress der Gesellschaft für Arbeitswissenschaften - Gestaltung der Arbeitswelt der Zukunft (Munich, Germany, Mar. 12-14, 2014) pp. 454-456. Dortmund, Germany : GfA-Press.

Marty, Clément, Günebak, Servet, Nadeau, Sylvie et Morency, François. 2017. « L’oculométrie peut-elle être utilisée pour étudier le travail de coordonnateur de trafic dans un centre de dégivrage aéronautique centralisé ? ». In 52ème Congrès de la Société d’Ergonomie de Langue Française (SELF) (Toulouse, France, Sept. 20-22, 2017) pp. 215-222. Société d'Ergonomie de Langue Française.

Melanson, A. et Nadeau, Sylvie. 2014. « L’application des principes de l’ingénierie de la résilience peut-elle permettre une prévention durable, efficace et efficiente dans le contexte de changement que connait l’ensemble du secteur manufacturier québécois? ». In Congrès AQHSST-RRSSTQ (Mont Sainte-Anne, QC, Canada, 7-9 mai 2014)

Melanson, Annick et Nadeau, Sylvie. 2016. « Managing OHS in complex and unpredictable manufacturing systems: can FRAM bring agility? ». In Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future: Proceedings of the AHFE 2016 International Conference on Human Aspects of Advanced Manufacturing, July 27-31, 2016, Walt Disney World®, Florida, USA (Florida, FL, USA, July 27-31, 2016) Coll. « Advances in Intelligent Systems and Computing », vol. 490. pp. 341-348. Springer International Publishing.
Compte des citations dans Scopus : 5.

Mofidi Naeini, Alimeh et Nadeau, Sylvie. 2022. « A review if the application of FRAM and STAMP approaches combined with other methods ». In Human Factors and Systems Interaction. AHFE (2022) International Conference (New-York, NY, USA, July 24-28, 2022) Coll. « AHFE Open Access », vol. 52. pp. 466-482. AHFE International.

Mofidi Naeini, Alimeh et Nadeau, Sylvie. 2021. « FRAM and STAMP new avenue for risk analysis of manufacturing in the context of industry 4.0 ». In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Bochum, Germany, Mar. 03-05, 2021) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 67. Dortmund : GfA-Press.

Moreau, S. et Nadeau, Sylvie. 2013. « Integration of occupational health and safety into the development of mining vehicles ». In Dokumentation des 59. Arbeitswissenschaftlichen Kongresses Krefeld 27.02.-01.03.2013 (Krefeld, Germany, Feb. 27-Mar. 1, 2013) pp. 309-312. Dortmund, Germany : GfA-Press.

Moreira, D., Nadeau, Sylvie et Ateme-Nguema, B.. 2013. « Evolutionary algorithmes and swarm intelligence to solve problems applied to complex problems, big data and underground mining engineering ». In 2013 JSM proceedings : papers presented at the Joint Statistical Meetings, Montréal, Québec, Canada, August 3-8, 2013, and other ASA-sponsored conferences. (Montreal, QC, Canada, Aug. 3-8, 2013) Alexandria, VA, USA : American Statistical Association.

Moreira, D., Nadeau, Sylvie et Ateme-Nguema, B.. 2012. « Prioritization of prevention activities in confined places by meta-heuristic methods : the case of respiratory problems in underground gold mines in Abitibi-Témiscamingue (Canada) ». In International Ergonomics Association World Congress (Recife, Brazil, Feb. 12-16, 2012)

Morinière, E., Morency, François et Nadeau, Sylvie. 2014. « Ethylene Glycol and workers: a study of documented exposures ». In Kongress der Gesellschaft für Arbeitswissenschaften - Gestaltung der Arbeitswelt der Zukunft (Munich, Germany, Mar. 12-14, 2014) pp. 584-586. Dortmund, Germany : GfA-Press.

Mounet, M., Morency, François et Nadeau, Sylvie. 2013. « Integration of human factors in deicing operations in prospect of occupational health and safety of aircraft deicing workers ». In Dokumentation des 59. Arbeitswissenschaftlichen Kongresses Krefeld 27.02.-01.03.2013 (Krefeld, Germany, Feb. 27-Mar. 1, 2013) pp. 291-294. Dortmund, Germany : GfA-Press.

Nadeau, S., Bouzid, H. A. et Kenné, J. P.. 2003. « Conception d'un convoyeur à bagages pour le chargement/déchargement des avions ». In Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2002-2003 : Actes (Montréal, QC, Canada, 25 avril 2003) pp. 67-72. École de technologie supérieure.

Nadeau, S., Morency, François et Nsangou, Jacques Robert. 2015. « The contextualisation of lean manufacturing in the mining sector: forseeable challenges to occupational health and safety ». In The Proceedings of the 19th Triennial Congress of the International Ergonomics Association. Melbourne, 9-14 August, 2015 (Melbourne, Australia, Aug. 9-14, 2015) International Ergonomics Association.

Nadeau, Sylvie. 2005. « Can ergonomics (and investments in health and safety) be useful in sustaining a competitive advantage? ». In Contemporary Ergonomics 2005 (Hertfordshire, United Kingdom, Apr. 5-7, 2005) Coll. « Contemporary Ergonomics 2005 » pp. 313-317. UK : Taylor & Francis.

Nadeau, Sylvie. 2008. « Integrating occupational health and safety to operational risks management : a significant challenge and organizational culture ». In 40th Annual Conference of the Nordic Ergonomics Society (NES) (Reykjavik, Iceland, Aug. 11-13, 2008) Iceland : Icelandic Ergonomics Society.

Nadeau, Sylvie, Arteau, Jean et Manolache, Constantin. 2011. « Reinforcing bar installation : case study of a training center for the steel trades ». In 57. Kongress der Gesellschaft für Arbeitswissenschaftlichen (Chemnitz, Allemagne, Mar. 23-25, 2011) pp. 117-120. Dortmund : GfA-Press.

Nadeau, Sylvie, Ateme-Nguema, B., Chene, C. et Zimolo, J.. 2013. « Integration of occupational health and safety into the design of flexible manufacturing systems: documented experience in the wood-processing sector ». In Dokumentation des 59. Arbeitswissenschaftlichen Kongresses Krefeld 27.02.-01.03.2013 (Krefeld, Germany, Feb. 27-Mar. 1, 2013) pp. 287-290. Dortmund, Germany : GfA-Press.

Nadeau, Sylvie, Badri, Adel, Wells, Richard, Neumann, Patrick, Kenny, Glen et Morrison, Douglas. 2013. « Sustainable canadian mining: Occupational health and safety challenges ». In Proceedings of the Human Factors and Ergonomics Society Annual Meeting (HFES) (San Diego, CA, USA, Sept. 30 - Oct. 4, 2013) pp. 1071-1074. Santa Monica, CA, USA : Human Factors an Ergonomics Society Inc..
Compte des citations dans Scopus : 4.

Nadeau, Sylvie, Bouzid, Hakim et Kenné, Jean-Pierre. 2003. « L'enseignement par la méthode des cas en génie mécanique ». In Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2001-2002 : Actes (Montréal, QC, Canada, 11 juin 2002) pp. 13-16. École de technologie supérieure.

Nadeau, Sylvie, Bouzid, Hakim et Prud'Homme, D.. 2007. « Étude du mécanisme lésionnel de la hernie discale : modélisation du comportement élastique non linéaire ». In Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montréal, QC, Canada, 17-19 déc. 2007) Montréal : École de technologie supérieure.

Nadeau, Sylvie, Gbodossou, André et Hallé, Stéphane. 2009. « Towards integrating occupational health and safety in industrial project management ». In 2nd International Conference on Industrial Risk Engineering = 2e Congrès International sur l'Ingénierie des Risques Industriels (CIRI) (Reims, France, 13-15 mai 2009)

Nadeau, Sylvie, Gilbert, R. et Leblanc, D.. 1999. « Prévention des maux de dos selon une approche reposant sur les mécanismes lésionnels et les mécanismes générateurs d'efforts ». In L'intégration des ressources humaines et des technologies: le défi : 3e Congrès International de Génie Industriel; Montréal, Québec, Mai 1999; actes = Integration of human resources and technologies: the challenge (Montréal, QC, Canada, 26-28 mai 1999) Montréal, QC, Canada : Presses Internationales Polytechnique .

Nadeau, Sylvie, Gilbert, R. et Leblanc, D.. 1996. « Toward a multicriterion analysis for the prevention of low back pain ». In Proceedings of the Fifth Industrial Engineering Research Conference : Minneapolis, Minnesota, USA, May 18-20, 1996 (Minneapolis, MN, USA, May 18-20, 1996) pp. 723-728. Norcross, GA, USA : Institute of Industrial Engineers.

Nadeau, Sylvie, Hallé, Stéphane, Déry, S., Doucet, P., Gilbert, R., Gratton, L., Ngô, Anh Dung, Arteau, Jean, Bouzid, Hakim, Brousseau, J., Dessureault, J., Gauthier, F., Laville, Frédéric, Le-Huy, P., Marchand, Françoise, Petit, Yvan, Rodier, D. et Thomas, Marc. 2007. « Vers l'intégration de connaissances en santé et sécurité du travail en formation universitaire (génie mécanique) - une collaboration unique ». In 24e Congrès de l’Association Internationale de Pédagogie Universitaire (AIPU) (Montréal, QC, Canada, 16-18 mai 2007) pp. 96-100. Association Internationale de Pédagogie Universitaire (AIPU).

Nadeau, Sylvie et Kenné, Jean-Pierre. 2011. « Reduction of machine safety risks through optimal management of production : reflections on a decade research ». In Dokumentation des 57. Arbeitswissenschaftlichen Kongresses in Chemnitz [Documentation of the 57th Work Scientific Congress in Chemnitz ] (Chemnitz, Allemagne , Mar. 23-25, 2011) pp. 525-527. Dortmund : GfA-Press.

Nadeau, Sylvie, Kenné, Jean-Pierre et Alexandru, Paul. 2009. « Modeling the integration of occupational health and safety risks with operational risks associated with autonomous and multi-skilled work performed in uncertain environments ». In 2nd International Conference on Industrial Risk Engineering = 2e Congrès International sur l'Ingénierie des Risques Industriels (CIRI) (Reims, France, 13-15 mai 2009)

Nadeau, Sylvie, Leblanc, D. et Gilbert, R.. 1998. « Asymmetries of information in the prevention of back injuries ». In INFORMS National Meeting 1998 (Montreal, QC, Canada, Apr. 26-29, 1998) INFORMS.

Nadeau, Sylvie, Leblanc, D. et Gilbert, R.. 1998. « Gestion scientifique et organisationnelle des risques de maux de dos dans la nouvelle réalité des entreprises ». In Le génie industriel dans un monde sans frontières : 2e Congrès international franco-québécois du 3 au 5 septembre 1997, Albi (France) (Albi, France, 3-5 sept. 1997) Albi, France : Ecole des Mines.

Nadeau, Sylvie, Leblanc, D. et Gilbert, R.. 1999. « Les comportements stratégiques dans la gestion des risques de S.S.T. pour le travail autonome et polyvalent ». In L'intégration des ressources humaines et des technologies: le défi : 3e Congrès International de Génie Industriel; Montréal, Québec, Mai 1999; actes = Integration of human resources and technologies: the challenge (Montréal, QC, Canada, 26-28 mai 1999) Montréal, QC, Canada : Presses Internationales Polytechnique .

Nadeau, Sylvie, Leblanc, D. et Robert, G.. 2001. « L'approche partenariale comme réponse au phénomène d'aléa moral dans le travail autonome et polyvalent ». In Comptes rendus du congrès SELF-ACE 2001 – Les transformations du travail, enjeux pour l’ergonomie (Montréal, QC, Canada, 3-5 oct. 2001) pp. 243-248. Montréal, QC, Canada :

Nahas, Nabil, Ateme-Nguema, B., Fatisson, Julien, Nadeau, Sylvie, Hallé, Stéphane et Viau, C.. 2012. « Integrated and adaptive risk prioritization pilot test for engineered nanoparticles ». In Conférence Internationale Ne3LS (Montréal, QC, Canada, Nov. 1-2, 2012)

Napon, Frank et Nadeau, Sylvie. 2018. « Vers une intégration des risques opérationnels, de santé et de sécurité du travail en milieu universitaire ». In Canada International Conference on Education (CICE) (Toronto, ON, Canada, June 25-28, 2018) pp. 269-273. Infonomics Society.

Nemati, A., Nadeau, S., Ateme-Nguema, B. et Belmonte, J.. 2019. « Identifying lean tools to improve mining productivity and OHS conditions ». In 13ème Conférence internationale de CIGI QUALITA (Montréal, QC, Canada, Juin 25-28, 2019)

Ngô, Valérie Tuyêt Mai, Nadeau, Sylvie et Hallé, Stéphane. 2019. « Validation of a cooling vest’s usability matrix for deep and ultra-deep mining environments ». In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Dresden, Germany, Feb. 27-Mar. 1, 2019) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 65. Dortmund : GfA-Press.

Ngô, Valérie Tuyêt Mai, Nadeau, Sylvie, Mackowiak, Justine et Hallé, Stéphane. 2016. « Ergonomic challenges in designing personal cooling equipment for ultra-deep mining ». In Advances in Ergonomics in Design: Proceedings of the AHFE 2016 International Conference on Ergonomics in Design, July 27-31, 2016, Walt Disney World®, Florida, USA (Florida, FL, USA, July 27-31, 2016) Coll. « Advances in Intelligent Systems and Computing », vol. 485. pp. 757-767. Springer International Publishing.
Compte des citations dans Scopus : 5.

Ondze Gazani, D. E., Nadeau, S. et Hof, L.. 2023. « Mise en service des lunettes intelligentes pour l’assemblage ou le désassemblage ». In 43e congrès de l’AQHSST (Trois-Rivières, QC, Canada, 10-12 mai 2023)

Panet-Raymond, N., Nadeau, Sylvie, Gilbert, R. et Leblanc, D.. 1999. « Analyse de la stabilité posturale dans des conditions de perturbations et d'incertitudes ». In L'intégration des ressources humaines et des technologies: le défi : 3e Congrès International de Génie Industriel; Montréal, Québec, Mai 1999; actes = Integration of human resources and technologies: the challenge (Montréal, QC, Canada, 26-28 mai 1999) Montréal, QC, Canada : Presses Internationales Polytechnique .

Plonka, J., Fobasso, E., Tchoupou, M., Zeouaoui, A., Oussou, T., Nadeau, Sylvie et Morency, François. 2014. « Safe aircraft de-icing zone ». In 2014 Institute of Industrial Engineers Annual Conference and Expo (Montreal, QC, Canada, May 31-June 3, 2014) Montreal, QC, Canada : Institute of Industrial Engineers.

Prud'homme, D., Nadeau, Sylvie et Bouzid, Hakim. 2004. « Étude de mécanisme lésionnel de la hernie discale : modélisation du comportement viscoélastique ». In 72e Congrès de l'ACFAS (Montréal, QC, Canada, 10-12 mai 2004)

Roque, N., Nadeau, Sylvie et Badri, A.. 2014. « Preliminary ergonomics of a bolting machine and a drill used in underground mining ». In Kongress der Gesellschaft für Arbeitswissenschaften - Gestaltung der Arbeitswelt der Zukunft (Munich, Germany, Mar. 12-14, 2014) pp. 339-341. Dortmund, Germany : GfA-Press.

Sakkouhi, A. et Nadeau, Sylvie. 2014. « Connaissance et maîtrise de l’impact des activités d’amélioration continue sur la santé et la sécurité du travail ». In Congrès AQHSST-RRSSTQ (Mont Sainte-Anne, QC, Canada, 7-9 mai 2014)

Sakkouhi, A. et Nadeau, Sylvie. 2013. « Knowing and mastering the impact of lean manufacturing on OHS ». In Dokumentation des 59. Arbeitswissenschaftlichen Kongresses Krefeld 27.02.-01.03.2013 (Krefeld, Germany, 27 Feb.-Mar. 1, 2013) pp. 521-524. Dortmund, Germany : GfA-Press.

Slim, H. et Nadeau, S.. 2019. « The need for a systemic perspective in aircraft deicing: a proposal of a risk and safety analysis method combining FRAM and fuzzy logic ». In CASI-AERO 2019 (Laval, QC, Canada, 14-16 mai 2019)

Slim, Hussein et Nadeau, Sylvie. 2021. « The application of Rough Sets Theory as a data-mining tool to classify complex functions in safety management ». In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Bochum, Germany, Mar. 03-05, 2021) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 67. Dortmund : GfA-Press.

Slim, Hussein, Nadeau, Sylvie et Morency, François. 2018. « FRAM: A complex system’s approach for the evaluation of aircraft on-ground deicing operations ». In Gesellschaft für Arbeitswissenschaft (Francfort, Allemagne, Fev. 21-23, 2018) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 64. GFA Press.

Slim, Hussein, Nadeau, Sylvie et Morency, François. 2018. « The application of the Functional Resonance Analysis Method (FRAM) to evaluate factors affecting times-to-completion and graduation in graduate studies ». In Gesellschaft für Arbeitswissenschaft (Francfort, Allemagne, Fev. 21-23, 2018) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 64. GFA Press.

Tiaya Tedonchio, Christian, Nadeau, Sylvie, Boton, Conrad et Rivest, Louis. 2021. « BIM and PLM-based management of occupational health and safety: A comparative literature review ». In Proceedings of the 38th International Conference of CIB W78 (Luxembourg, Oct. 13-15, 2021) pp. 892-901.

Torres Medina, Y., Nadeau, Sylvie et Morency, François. 2014. « Fatigue and workload within aircraft ground deicing operations: theoretical framework ». In 2014 Institute of Industrial Engineers Annual Conference and Expo (Montreal, QC, Canada, May 31-June 3, 2014) Montreal, QC, Canada : Institute of Industrial Engineers.

Torres Medina, Y., Nadeau, Sylvie et Morency, François. 2014. « Étude de la fatigue et de la charge de travail chez une population de préposés au dégivrage des avions au Canada ». In Congrès AQHSST-RRSSTQ (Mont Sainte-Anne, QC, Canada, 7-9 mai 2014)

Torres Medina, Yaniel et Nadeau, Sylvie. 2020. « Operator 4.0 in manufacturing: trends, potential technologies and future perspectives ». In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Berlin, Germany, March 16-18, 2020) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 66. Dortmund : GfA-Press.

Torres Medina, Yaniel, Nadeau, Sylvie et Landau, Kurt. 2019. « Application of human errors analysis in manufacturing: A proposed intervention framework and techniques selection ». In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Dresden, Germany, Feb. 27-Mar. 1, 2019) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 65. Dortmund : GfA-Press.

Torres, Y., Morency, François et Nadeau, Sylvie. 2013. « Factors influencing of on ground deicing operation: ergonomics and occupational safety perspectives ». In American Industrial Hygiene Conference & Exposition AIHce 2013 (Montreal, QC, Canada, May 18-23, 2013) Falls Church, VA, USA : American Industrial Hygiene Association.

Torres, Yaniel, Nadeau, Sylvie et Landau, Kurt. 2022. « Analysis of assembly errors using systems thinking approach: Application of the HFACS framework ». In Human Error, Reliability, Resilience, and Performance. AHFE (2022) International Conference (New-York, NY, USA, July 24-28, 2022) Coll. « AHFE Open Access », vol. 33. pp. 60-66. AHFE International.

Torres, Yaniel, Nadeau, Sylvie et Landau, Kurt. 2021. « Application of SHERPA (Systematic Human Error Reduction and Prediction Approach) as an alternative to predict and prevent human error in manual assembly ». In Proceedings of the 21st Congress of the International Ergonomics Association (IEA 2021). IEA 2021 : Volume III: Sector Based Ergonomics (Vancouver, BC, Canada, June 13-18, 2021) Coll. « Lecture Notes in Networks and Systems », vol. 221. pp. 445-453. Cham : Springer.

Torres, Yaniel, Nadeau, Sylvie et Landau, Kurt. 2021. « Evaluation of shift work scheduling and overtime allocation practices using the HSE Fatigue Index: application on complex manual assembly ». In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Bochum, Germany, Mar. 03-05, 2021) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 67. Dortmund : GfA-Press.

Tremblay, Guy, Larivière, C., Nadeau, Sylvie, Harrabi, Lofti, Dolez, Patricia, Vu-Khanh, Toan et Lara, J.. 2007. « Caractérisation de la souplesse des gants de protection par une méthode biomécanique basée sur l’électromyographie de surface : étude de validation ». In Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montréal, QC, Canada, 17-19 déc. 2007) Montréal : École de technologie supérieure.

Trudel, Bryan, Zaras, Kazimierz et Nadeau, Sylvie. 2014. « L’approche DRSA dans l’identification des facteurs clés en gestion des équipements miniers innovants ». In 80th International meeting of the European Working Group in Multicriteria Decision Aiding (EWG-MCDA) (Québec, QC, Canada, 9-10 oct. 2014) Québec, QC, Canada : Université Laval.

Vinches, L., Hallé, S. et Nadeau, S.. 2015. « Amélioration du confort thermique en mines profondes ». In Conférence mensuelles en sécurité du travail et contrôle des risques industriels, ÉREST, ÉTS, AQHSST (Montréal, QC, Canada, 12 mars 2015)

Wyckaert, Pauline, Nadeau, Sylvie et Bouzid, Hakim. 2017. « Analysis of risks of pressure vessels ». In Gesellschaft für Arbeitswissenschaft : Soziotechnische Gestaltung des digitalen Wandels – kreativ, innovativ, sinnhaft (Zurich, Suisse, Fev. 15-17, 2017) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 63. GFA Press.

Zaras, K., Nadeau, Sylvie et Ngô, Anh Dung. 2009. « Vers l'audit de la performance des sous-traitants d'entreprises manufacturières : comment sélectionner des fournisseurs diligents en santé et en sécurité du travail ». In 2nd International Conference on Industrial Risk Engineering = 2e Congrès International sur l'Ingénierie des Risques Industriels (CIRI) (Reims, France, 13-15 mai 2009)

Livre

Nadeau, Sylvie et Petit, Yvan et Hallé, Stéphane et Morency, François et Dufresne, Louis, éds. 2015. « Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics ». 2nd edition. Newcastle upon Tyne, UK : Cambridge Scholars Publishing. 180 p.

Nadeau, Sylvie, Petit, Yvan, Hallé, Stéphane, Morency, François et Dufresne, Louis. 2010. « Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics ». Newcastle upon Tyne, UK : Cambridge Scholars Publishing. 152 p.

Raya, Maroua, Aidibe, Ali, Nadeau, Sylvie, Hof, Lucas et Moustapha, Hany. 2023. « Livre blanc Réseau SDG Innovation: Au delà de l’industrie 4.0/5.0 : Vers une société Smart Digital Green ». . 60 p.

Chapitre de livre

Bernier, G., Petit, Y., Marchand, F., Terriault, P. et Nadeau, S.. 2015. « Chapter 9: Case study : Toy design ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 79-86. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Bernier, G., Petit, Yvan, Marchand, Françoise, Terriault, Patrick et Nadeau, Sylvie. 2010. « Case study : toy design ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. pp. 74-82. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Bouzid, H., Kenné, J. P., Nadeau, S. et Gowings, T.. 2015. « Chapter 2: Case study : Designing a log splitter ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 7-13. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Bouzid, H., Nadeau, S. et Kenné, J. P.. 2015. « Chapter 1: Case study : Gasket test rig ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 1-6. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Bouzid, H., Nadeau, S., Kenné, J. P. et Giner-Morency, C.. 2015. « Chapter 4: Case study : Designing a hydraulic car lift for small auto repair shops ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 26-36. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Bouzid, H., Nadeau, S., Kenné, J. P., Gowings, T. et Giner-Morency, C.. 2015. « Chapter 5: Case study : Designing a boom lift ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 37-55. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Bouzid, Hakim, Kenné, Jean-Pierre et Nadeau, Sylvie. 2010. « Case study : designing a log splitter ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. pp. 7-13. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Bouzid, Hakim, Nadeau, Sylvie et Kenné, Jean-Pierre. 2010. « Case study : designing a boom lift ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. pp. 36-53. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Bouzid, Hakim, Nadeau, Sylvie et Kenné, Jean-Pierre. 2010. « Case study : designing a hydraulic car lift for small auto repair shops ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. pp. 26-35. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Bouzid, Hakim, Nadeau, Sylvie et Kenné, Jean-Pierre. 2010. « Case study : gasket test rig ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. pp. 1-6. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Kenné, J. P., Bouzid, H., Nadeau, S. et Giner-Morency, C.. 2015. « Chapter 14: Case study : Designing a lift truck ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 122-128. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Kenné, J. P., Bouzid, H., Nadeau, S. et Giner-Morency, C.. 2015. « Chapter 6: Case study : Designing an aerial work platform vehicle ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 54-63. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Kenné, J. P., Nadeau, S., Bouzid, H. et Giner-Morency, C.. 2015. « Chapter 12: Case study: automated overhead crane ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 105-113. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Kenné, Jean-Pierre, Bouzid, Hakim et Nadeau, Sylvie. 2010. « Case study : designing a lift truck ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. pp. 132-138. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Kenné, Jean-Pierre, Bouzid, Hakim et Nadeau, Sylvie. 2010. « Case study : designing an aerial work platform vehicle ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. pp. 54-60. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Kenné, Jean-Pierre, Nadeau, Sylvie et Bouzid, Hakim. 2010. « Case study : automated overhead crane ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Nadeau, S., Arteau, J. et Giner-Morency, C.. 2015. « Chapter 11: Case study : Hybrid vehicle ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 98-104. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Nadeau, S., Ateme-Nguema, B. H., Benedetti, C. et Vachon, C.. 2015. « Chapter 15: Case study: J. L. Vachon: Industry leader and pioneer ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 129-141. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Nadeau, S., Bouzid, H., Kenné, J. P. et Giner-Morency, C.. 2015. « Chapter 13: Designing an airplane baggage belt loader ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 114-121. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Nadeau, Sylvie et Arteau, Jean. 2010. « Case Study : Hybrid vehicle ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. pp. 110-116. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Nadeau, Sylvie, Ateme-Nguema, Barthélemy, Benedetti, Claudio et Vachon, C.. 2010. « Case Study : J.L. Vachon : industry leader and pioneer ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. pp. 139-150. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Nadeau, Sylvie, Bouzid, Hakim et Kenné, Jean-Pierre. 2010. « Case study : designing an airplane baggage belt loader ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. pp. 125-131. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Article de revue ou de magazine, non révisé par les pairs

Badri, Adel, Nadeau, Sylvie et Gbodossou, André. 2011. « Intégrer la SST dans la gestion de projets industriels ». Travail et santé, vol. 27, nº 2. pp. 28-29.

Charlot, E., Nadeau, Sylvie et Kenné, Jean-Pierre. 2006. « Impact du contrôle du cadenassage sur les risques d'accidents et les coûts de production ». Travail et Santé, vol. 22, nº 3. pp. 48-52.

Emami-Mehrgani, Behnam, Nadeau, Sylvie et Kenné, Jean-Pierre. 2011. « Cadenassage et baisse des coûts de production ». Travail et santé, vol. 27, nº 2. pp. 13-15.

Grange, Mathieu, Nadeau, Sylvie et Hof, Lucas. 2 novembre 2022. « Disassembly 4.0/5.0 in the Automotive Industry ». [Article de recherche]. Substance ÉTS.

Grange, Mathieu, Nadeau, Sylvie et Hof, Lucas. 2 novembre 2022. « Désassemblage 4.0/5.0 : le cas de l’industrie automobile ». [Article de recherche]. Substance ÉTS.

Julien, B., Nadeau, Sylvie, Voyer, N. et Roy, C.. 2004. « Dévelopement d'un processus d'audit de la performance d'entreprises manufacturières ». Info-productivité, nº 9. pp. 12-13.

Julien, B., Nadeau, Sylvie, Voyer, N. et Roy, C.. 2004. « Dévelopement d'un processus d'audit de la performance d'entreprises manufacturières - suite ». Info-productivité. pp. 8-9.

Landeau, Kurt et Nadeau, Sylvie. 2021. « Kontrolle der Flugzeugenteisung unter widrigen physikalisch-chemischen Umgebungsbedingungen ». [Éditorial]. ASU Arbeitsmed Sozialmed Umweltmed, vol. 56, nº 11. pp. 717-721.

Lescure, E., Nadeau, S. et Morency, F.. 2015. « Ingénierie et résilience: dégivrage d'avions ». Travail et Santé, vol. 31, nº 2. p. 48.

Leurs, Romain, Morency, François et Nadeau, Sylvie. 2015. « Détection de proximité avion-nacelle pour les opérations de dégivrage ». Substance ÉTS.

Modifi Naeini, Alimeh et Nadeau, Sylvie. 23 mai 2022. « Approches systémiques d’analyse des risques en fabrication numérique ». [Article de recherche]. Substance ÉTS.

Modifi Naeini, Alimeh et Nadeau, Sylvie. 23 mai 2022. « Systemic Approaches to Risk Analysis in Digital Manufacturing ». [Article de recherche]. Substance ÉTS.

Nadeau, Sylvie. 2021. « Acceptabilité sociale ou pratique? De quoi parle-t-on? ». Travail et Santé, vol. 37, nº 1. p. 21.

Nadeau, Sylvie. 2015. « Efficacité et efficience, un équilibre à atteindre ». Travail et Santé, vol. 31, nº 5. p. 8.

Nadeau, Sylvie. 2014. « La gestion intégrée des risques de santé et de securité du travail: une mode ou une solution? ». Travail et Santé, vol. 30, nº 5. p. 4.

Nadeau, Sylvie. 2017. « Le lean university va-t-il franchir nos portes? ». Travail et Santé, vol. 33, nº 3. p. 36.

Nadeau, Sylvie, Badri, Adel, Lagnika, Sémirath Brice, Sakkouhi, Amine et Emami-Mehrgani, Behnam. 2011. « Courrier du lecteur : Sensibiliser les ingénieurs à la santé publique : Constat d’impuissance ou force tranquille? ». Travail et Santé, vol. 27, nº 2. pp. 35-36.

Nadeau, Sylvie et Landeau, Kurt. 5 novembre 2019. « Impact of Digital on Work ». [Article de recherche]. Substance ÉTS.

Nadeau, Sylvie et Landeau, Kurt. 5 novembre 2019. « Incidences du numérique sur le travail ». [Article de recherche]. Substance ÉTS.

Nadeau, Sylvie et Morency, François. 2013. « L'université un partenaire d'excellence en prévention ». Travail et Santé, vol. 29, nº 3. pp. 26-27.

Ngô, Anh Dung, Hallé, Stéphane, Nadeau, Sylvie, Déry, P., Doucet, P. , Gilbert, R. , Gratton, L., Arteau, Jean, Bouzid, Hakim, Brousseau, J. , Dessureault, P. , Gauthier, F. , Laville, Frédéric, Le Huy, P. , Marchand, Françoise , Petit, Yvan , Rodier, D. et Thomas, Marc. 2007. « Le défi de l'intégration des connaissances en santé et en sécurité du travail - génie mécanique ». Travail et Santé, vol. 23, nº 4. pp. 36-39.

Nsamo, Ribet Junior et Nadeau, Sylvie. 1 mai 2023. « Conception d’un outil de gestion de projet universitaire ». Substance ÉTS.

Nsamo, Ribet Junior et Nadeau, Sylvie. 1 mai 2023. « Designing an academic project management tool ». Substance ÉTS.

Slim, Hussein et Nadeau, Sylvie. 28 mars 2022. « Combiner l’analyse de la résonance fonctionnelle à la logique floue ». [Article de recherche]. Substance ÉTS.

Slim, Hussein et Nadeau, Sylvie. 28 mars 2022. « Combining Functional Resonance Analysis Method with Fuzzy Logic ». [Article de recherche]. Substance ÉTS.

Torres Medina, Yaniel et Nadeau, Sylvie. 23 septembre 2020. « Avènement de l’opérateur 4.0 : l’avenir du secteur manufacturier ». [Article de recherche]. Substance ÉTS.

Torres Medina, Yaniel et Nadeau, Sylvie. 23 septembre 2020. « The Future in Manufacturing - The Rise of Operator 4.0 ». [Article de recherche]. Substance ÉTS.

Torres Medina, Yaniel, Nadeau, Sylvie et Landau, Kurt. 18 novembre 2019. « Assembly guidance systems in aerospace manufacturing ». [Article de recherche]. Substance ÉTS.

Torres Medina, Yaniel, Nadeau, Sylvie et Landau, Kurt. 18 novembre 2019. « Des systèmes pour guider l’assemblage en fabrication aérospatiale ». [Article de recherche]. Substance ÉTS.

Torres Medina, Yaniel, Nadeau, Sylvie et Landau, Kurt. 30 juin 2021. « Fabrication aérospatiale : horaires, heures supplémentaires et fatigue ». [Article de recherche]. Substance ÉTS.

Torres Medina, Yaniel, Nadeau, Sylvie et Landau, Kurt. 30 juin 2021. « Work Schedules, Overtime, and Fatigue in Aerospace Manufacturing ». [Article de recherche]. Substance ÉTS.

Torres, Yaniel, Morency, François et Nadeau, Sylvie. 2014. « Dégivrage d'avions : réduire la fatigue ». Travail et Santé, vol. 30, nº 1. p. 23.

Torres, Yaniel, Morency, François et Nadeau, Sylvie. 2015. « Fatigue et dégivrage d’avions au sol ». Travail et Santé, vol. 31, nº 4. pp. 9-11.

Affiche

Coutu, S., Nadeau, S. et Ateme-Nguema, B.. 2018. « Developing a design and implementation methodology of a lean and safe maintenance department ». Affiche numéro 280 présentée lors de la conférence : 32nd Triennial Congress of the International Commission on Occupational Health (ICOH) (Dublin, Ireland, April 29-May 4, 2018).

Coutu, S., Nadeau, S. et Ateme-Nguema, B.. 2017. « Implantation d’un département de maintenance intégrant Lean et santé et sécurité du travail ». Affiche présentée lors de la conférence : Congrès annuel AQHSST (Victoriaville, QC, Canada, 16-18 mai 2017).

Desire, E., Nadeau, S. et Boudreau-Trudel, B.. 2015. « Design of control panels for underground mining equipment: Why open innovation should be promoted as a sustainable approach to development ». Affiche numéro 349 présentée lors de la conférence : 19th Triennial Congress of the International Ergonomics Association (Melbourne, Australia, Aug. 9-14, 2015).

Diop, I., Nadeau, S. et Emami-Mehrgani, B.. 2016. « Intégration du cadenassage à la planification de la production et de la maintenance ». Affiche présentée lors de la conférence : 38e congrès de l'AQHSST : comportements sécuritaires, les tiens, les miens, les nôtres (Shawinigan, QC, Canada, 18-20 mai 2016).

Fatisson, Julien, Hallé, Stéphane et Nadeau, Sylvie. 2012. « Vers une gestion adaptative des risques de l’invisible… ». Affiche numéro EHS-05 présentée lors de la conférence : Conférence NanoQuébec 2012 (Montréal, QC, Canada, 20-21 mars 2012).

Khoddammohammadi, N. et Nadeau, S.. 2022. « Integration of traditional, automatized and intelligent technologies in manufacturing: Towards the integration of smart glasses ». Affiche présentée lors de la conférence : Congrès CARWH (En ligne, 15-16 sept. 2022).

Lagnika, S. B. et Nadeau, Sylvie. 2011. « La gestion des mines, ça s'intègre! ». Affiche présentée lors de la conférence : Colloque de la Direction de la Santé Publique de Montréal (Montréal, Canada, 31 mars 2011).

Manolache, C. T., Nadeau, Sylvie et Arteau, Jean. 2012. « Conditions de travail comme un facteur déterminant de la SST: le métier de poseurs d'armatures ». Affiche présentée lors de la conférence : Colloque de la Direction de la Santé Publique de Montréal (Montréal, QC, Canada, 29 mars 2012).

Mofidi Naeini, A. et Nadeau, S.. 2022. « Comparing FRAM and STAMP for occupational health and safety (OHS) and operational risks analysis: The case of data gloves in assembly 4.0 production ». Affiche présentée lors de la conférence : 33rd International Congress on Occupational Health (ICOH) (Melbourne, Australia ; Rome, Italy - En ligne, Feb. 06-10, 2022).

Nadeau, S.. 2018. « Towards lean, six sigma, and lean six sigma OHS impacts in universities ». Affiche numéro 26 présentée lors de la conférence : 32nd Triennial Congress of the International Commission on Occupational Health (ICOH) (Dublin, Ireland, April 29-May 4, 2018).

Nadeau, Sylvie, Hallé, Stéphane, Arteau, Jean, Ateme-Nguema, B., Badri, A., Belleau, Christian, Bouzid, Hakim, Debia, M., Emami-Mehrgani, B., Laville, Frédéric, Morency, François, Ngô, Anh Dung, Petit, Yvan et Voix, Jérémie. 2013. « Quand la vulgarisation scientifique reprend ses lettres de noblesse: le cas de l'EREST ». Affiche présentée lors de la conférence : Journée Découverte, École de technologie supérieure (Montréal, QC, Canada, 13 mars 2013).

Nemati, Ali, Nadeau, Sylvie et Ateme-Nguema, Barthélemy. 2017. « Lean tools adaptation into mining: An occupational health and safety approach ». Affiche présentée lors de la conférence : Congrès annuel AQHSST (Victoriaville, QC, Canada, 16-18 mai 2017).

Ngô, V. T. M., Nadeau, S. et Hallé, S.. 2016. « Veste de refroidissement adaptée au travail en mines ultra-profondes, critères ergonomiques ». Affiche présentée lors de la conférence : 38e congrès de l'AQHSST : comportements sécuritaires, les tiens, les miens, les nôtres (Shawinigan, QC, Canada, 18-20 mai 2016).

Raya, M. et Nadeau, S.. 2022. « Transformation 5.0 : modèles de maturité technologiques ». Affiche présentée lors de la conférence : Deuxième Forum international sur l’innovation 5.0 (Montréal, QC, Canada, 9 nov. 2022).

Sakkouhi, A. et Nadeau, Sylvie. 2012. « Le système qui va changer le monde. Faut-il se fier au Lean Manufacturing? ». Affiche présentée lors de la conférence : Colloque de la Direction de la Santé Publique de Montréal (Montréal, QC, Canada, 29 mars 2012).

Slim, H., Nadeau, S. et Morency, F.. 2017. « A review of applied methods for aircraft on-ground deicing ». Affiche présentée lors de la conférence : 39e Congrès de l'Association Québécoise pour l'Hygiène, la Santé et la Sécurité du Travail (AQHSST) (Victoriaville, QC, Canada, 16-18 mai 2017).

Communication

Ablitt, Wayne, Mayer, Zachary, Morrison, Douglas, Nadeau, Sylvie et Treasurywala, Adi. 2015. « Challenges associated with transferring new technologies to the mining industry ». Communication lors de la conférence : CEMI-UDMN panel, Canadian Science Policy Centre (Ottawa, ON, CA, Nov. 26, 2015).

Ateme-Nguema, Barthélemy, Nadeau, Sylvie, Viau, Claude, Camus, Michel, Hallé, Stéphane et Cloutier, Yves. 2011. « Aides à la décision & intelligence artificielle : méthodes à l'apparence impénétrable démystifiées : partie 2 : recours aux métaheuristiques ». Communication lors de la conférence : Séminaire de l'Université de Montréal (Montréal, QC, Canada, 28 sept. 2011).

Badiane, A., Kenné, Jean-Pierre et Nadeau, Sylvie. 2009. « Produire à moindre coût dans un espace sécuritaire ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 11 juin 2009).

Badri, Adel, Nadeau, Sylvie et Gbodossou, André. 2011. « Gestion intégrée des risques de SST : cas d'une mine à ciel ouvert au Québec ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 8 déc. 2011).

Badri, Adel, Nadeau, Sylvie et Gbodossou, André. 2010. « Intégrer les risques de santé et sécurité du travail dans la conduite de projets ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels, RRSSTQ, ÉREST, ÉTS (Montréal, Québec, Canada, 16 sept. 2010).

Boudreau-Trudel, B., Nadeau, S., Zaras, K. et Deschamps, I.. 2014. « Dix implantations de projets innovants en équipement minier: leurs impacts et leurs facteurs de réussite ». Communication lors de la conférence : Colloque régional 2014 en santé et sécurité minière. Asociation paritaire pour la santé et la sécurité du travail secteur minier (APSM) (Val-d'or, QC, Canada, 19 mars 2014).

Boudreau-Trudel, B., Nadeau, Sylvie, Zaras, K. et Deschamps, I. . 2013. « La gestion performante de l’innovation minière : résultats d’une recherche menée auprès de dix projets innovants ». Communication lors de la conférence : Conférences mensuelles en sécurité du travail et contrôle des risques industriels, RRSSTQ, ÉREST, ÉTS (Montréal, QC, Canada, 12 déc. 2013).

Busch, Daniel, Nadeau, Sylvie et Morency, François. 2016. « Vers une estimation du risque de lésions musculo-squelettiques dans le dégivrage des avions ». Communication lors de la conférence : 38e congrès de l'AQHSST : comportements sécuritaires, les tiens, les miens, les nôtres (Shawinigan, QC, Canada, 18-20 mai 2016).

Darveau, J., Gosselin, S., Lagrandeur, A., Nadeau, S., Hallé, S. et Boudreau-Trudel, B.. 2017. « Étude et conception primaire des tableaux de bord de boulonneuses et foreuses ». Communication lors de la conférence : Le colloque APSM (Malartic, Abitibi, 15 mars 2017).

Demers, S., Nadeau, Sylvie et Bouzid, Abdel-Hakim. 2011. « Une approche analytique pour la modélisation réaliste du mécanisme lésionnel de la hernie discale ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 10 mars 2011).

Demers, Sébastien, Bouzid, Hakim et Nadeau, Sylvie. 2009. « Étude du mécanisme lésionnel de la hernie discale : une approche analystique de modélisation de la hernie discale ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 10 déc. 2009).

Emami-Mehrgani, B., Nadeau, S. et Kenné, J. P.. 2010. « Optimisation des politiques de surveillance dans le milieu de l'industrie par la gestion de la procédure de cadenassage/décadenassage ». Communication lors de la conférence : Conférences mensueles en sécurité du travail et contrôle des risques industriels RRSSTQ, ÉREST, ÉTS (Montréal, QC, Canada, 9 déc. 2010).

Emami-Mehrgani, B., Nadeau, Sylvie et Kenné, Jean-Pierre. 2011. « Temps moyen de cadenassage/décadenassage : un outil d'optimisation des politiques de surveillance ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 14 avril 2011).

Emami-Mehrgani, Behnam, Nadeau, Sylvie et Kenné, Jean-Pierre. 2010. « Gérer le cadenassage/décadenassage : une stratégie de production optimale ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels, RRSSTQ, ÉREST, ÉTS (Montréal, Québec, Canada, 9 déc. 2010).

Fatisson, J., Nadeau, Sylvie, Hallé, Stéphane, Viau, C., Camus, M. et Ateme-Nguema, B.. 2012. « Développement d'un outil d'appréciation ou d'évaluation adaptative des risques à la santé humaine posés par les nanoparticules synthétiques ». Communication lors de la conférence : Journée d'activité de transfert de connaissances du Réseau Ne3LS (Montréal, QC, Canada, 5 juin 2012).

Fatisson, J., Nadeau, Sylvie, Hallé, Stéphane, Viau, C., Camus, M. et Ateme-Nguema, B.. 2012. « Développement d’un outil d’appréciation ou d’évaluation adaptative des risques à la santé humaine posés par les nanoparticules synthétiques ». Communication lors de la conférence : Demi-journée thématique RTM1 & RTM2, IRSPUM (Montréal, QC, Canada, 8 juin 2012).

Hallé, Stéphane et Nadeau, Sylvie. 2006. « Intégration de compétence en SST en milieu universitaire – Génie mécanique ». Communication lors de la conférence : Institut de Recherche en Santé et en Sécurité du Travail (IRSST) (Montréal, QC, Canada, 12 sept. 2006).

Hallé, Stéphane et Nadeau, Sylvie. 2008. « Vers l'intégration de connaissances en santé et en sécurité du travail en formation universitaire (génie mécanique): une collaboration unique ». Communication lors de la conférence : Séminaire de la communauté de pratique ValoRIST (Valorisation de la recherche de l'innovation sociale et de la technologie) (Montréal, QC, Canada, 22 fév. 2008).

Hallé, Stéphane, Nadeau, Sylvie, Vinches, Ludwig, Al-Sayed, Chady et Ngô, Valérie Tuyêt Mai. 2016. « Développement d’un vêtement de refroidissement individuel adapté au travail en mines profondes : évaluation des technologies existantes ». Communication lors de la conférence : Québec Mines (Québec, QC, Canada, 21-24 nov., 2016).

Jacques, E., Desbiens, E., Boivin, D. et Nadeau, S.. 2019. « Technologies numériques : une révolution en marche dans la gestion des risques ». Communication lors de la conférence : Panel, Événement Les Affaires - SST (Montréal, QC, Canada, 11 sept. 2019).

Julien, B. et Nadeau, Sylvie. 2003. « Processus d'évaluation d'entreprise ». Communication lors de la conférence : Présentation à la STIQ (Sous-traitance Industrielle Québec) (Montréal, QC, Canada, 7 nov. 2003).

Lagnika, S. B., Nadeau, Sylvie et Ateme-Nguema, B.. 2012. « Analyse de l’intégration des systèmes de gestion des risques SST/qualité/environnement dans les mines souterraines ». Communication lors de la conférence : Conférences mensuelles en sécurité du travail et contrôle des risques industriels, RRSSTQ, ÉREST, ÉTS (Montréal, QC, Canada, 12 janvier 2012).

Lagnika, S., Nadeau, Sylvie et Ateme-Nguema, B. . 2012. « Développement d’un modèle préliminaire de gestion intégrée : Cas des mines ». Communication lors de la conférence : Incorporation des risques opérationnels aux risques de Santé Sécurité du Travail (SST). École Polytechnique d'Abomey-Calavi (ÉPAC) (Abomey-Calavi, Bénin, 19 juin 2012).

Maghni, Karim et Nadeau, Sylvie. 2009. « Présence d'ODTS et d'ODTS-like dans les mines : réalité et impacts potentiels sur le rendement des mines ». Communication lors de la conférence : MBA UQAT (Université du Québec en Abitibi-Temiscamingue) (Rouyn-Noranda, QC, Canada, 7 mai 2009).

Mansour, M., Nadeau, Sylvie et Kenné, Jean-Pierre. 2007. « Sécurité des convoyeurs et intégration du cadenassage sur une ligne de production ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 15 nov. 2007).

Mofidi Naeini, A. et Nadeau, S.. 2021. « Data gloves in manufacturing, a review of OHS and operational concerns ». Communication lors de la conférence : 42e Congrès AQHSST : Unir la diversité pour une culture en santé (En ligne, 5 mai 2021).

Morency, François et Nadeau, Sylvie. 2013. « Ergonomie physique et cognitive du dégivrage des avions au sol ». Communication lors de la conférence : Conférences mensuelles en sécurité du travail et contrôle des risques industriels, RRSSTQ, ÉREST, ÉTS (Montréal, QC, Canada, 14 nov. 2013).

Nadeau, S.. 2015. « Initiation à la gestion intégrée des risques ». Communication lors de la conférence : 37e Congrès AQHSST (Saint-Sauveur, QC, Canada, 20-22 mai 2015).

Nadeau, S. et Hallé, S.. 2015. « Integrating OHS in mechanical engineering curriculum: a decade of innovation at ÉTS ». Communication lors de la conférence : Minerva Learning Forum (Montreal, QC, Canada, June 9, 2015).

Nadeau, S., Hof, L. et Landau, K.. 2022. « Les systèmes d'assistance numérique au service de la diversité ». Communication lors de la conférence : Congrès de l'AQHSST (Sherbrooke, QC, Canada, 11-13 mai 2022).

Nadeau, S., Morency, F. et Nsangou, J-R.. 2015. « Le lean mining et les défis associés à la SST ». Communication lors de la conférence : Colloque régional 2015 en santé et sécurité minière. Association paritaire pour la santé et la sécurité du travail secteur minier (Rouyn-Noranda, QC, Canada, 18 mars 2015).

Nadeau, Sylvie. 2007. « Gestion des risques : comment intégrer la gestion des risques de santé et de sécurité du travail aux risques opérationnels ». Communication lors de la conférence : MBA UQAT 2007, Rouyn-Noranda (Rouyn-Noranda, QC, Canada, 19 oct. 2007).

Nadeau, Sylvie. 2014. « Gestion des risques, sécurité du public, enjeux de conceptions et d’exploitations, les normes et règlements, SST sur les chantiers, les inspections, les nouvelles tendances ». Communication lors de la conférence : Les matins de l’Ordre:, Déjeuner # 1 – La santé et sécurité au travail, OIQ (Montréal, QC, Canada, 30 oct. 2014).

Nadeau, Sylvie. 2008. « Gestion des risques: comment intégrer la gestion des risques de santé et de sécurité du travail aux risques opérationnels ». Communication lors de la conférence : MBA UQAT 2008, Lasarre (Lasarre, QC, Canada, 21 mai 2008).

Nadeau, Sylvie. 2008. « Gestion des risques: comment intégrer la gestion des risques de santé et de sécurité du travail aux risques opérationnels ». Communication lors de la conférence : MBA UQAT 2008, Rouyn-Noranda (Rouyn-Noranda, QC, Canada, 17 nov. 2008).

Nadeau, Sylvie. 2019. « Incidences du numérique sur le travail ». Communication lors de la conférence : École d’été Industrie 4.0 (Montréal, QC, Canada, 27 août 2019).

Nadeau, Sylvie. 2019. « Incidences du numérique sur le travail ». Communication lors de la conférence : Mardi 4.0/Séminaires du Service des Enseignements Généraux, École de technologie supérieure (Montréal, QC, Canada, 5 nov. 2019).

Nadeau, Sylvie. 2019. « La métallurgie dans un environnement techno ». Communication lors de la conférence : 4ième Colloque de la métallurgie intelligente (Trois-Rivières, QC, Canada, 31 oct.-1 nov. 2019).

Nadeau, Sylvie. 2017. « La perception des risques ». Communication lors de la conférence : Événement – Leadership SST du Centre patronal de santé et de sécurité du travail du Québec : Les risques et la « Tolérance Zéro », êtes-vous bien outillé? (Brossard, QC, Canada, 30 mai 2017).

Nadeau, Sylvie. 2002. « La prévention des maux de dos: de l'entreprise à la recherche un parcours professionnel ». Communication lors de la conférence : Congrès national de la Société canadienne de génie industriel (Montréal, QC, Canada, 24-26 janv. 2002).

Nadeau, Sylvie. 2012. « Les mines : Quand la SST vaut son pesant d'or ». Communication lors de la conférence : Conférences du doyen de l'École de technologie supérieure (Montréal, QC, Canada, 5 déc. 2012).

Nadeau, Sylvie. 2002. « L’amélioration de la santé-sécurité par la conception de produits ». Communication lors de la conférence : Présentation au comité aviseur de Bombardier produits récréatifs).

Nadeau, Sylvie et Arteau, Jean. 2010. « The canadian ergo-engineer ». Communication lors de la conférence : 1st Ergoman Workshop Proceedings : Ergoman-project : Contribution to Ergonomics Training. (Darmstadt, Deutschland, Mar. 24, 2010).

Nadeau, Sylvie et Ateme-Nguema, B.. 2011. « L'intégration de la santé et de la sécurité du travail aux risques opérationnels: un défi bouleversant la culture organisationnelle ». Communication lors de la conférence : MBA UQAT 2011, Rouyn-Noranda (Rouyn-Noranda, QC, Canada, 20 mai 2011).

Nadeau, Sylvie, Badri, A., Boudreau-Trudel, B., Lagnika, S., Moreira, D. et Benabderrahmane, M.C. . 2013. « Les mines : quand la SST vaut son pesant d’or ». Communication lors de la conférence : Conférences mensuelles en sécurité du travail et contrôle des risques industriels, RRSSTQ, ÉREST, ÉTS (Montréal, QC, Canada, 10 oct. 2013).

Nadeau, Sylvie, Gilbert, R. et Leblanc, D.. 1997. « La problématique de l'identification des facteurs de risques d'origine ergonomique ». Communication lors de la conférence : Présentation au groupe de recherche sur les risques technologiques majeurs (chaire Jarislowsky et centre CIRANO) (Montréal, QC, Canada, 24 oct. 1997).

Nadeau, Sylvie, Gilbert, R. et Leblanc, D.. 1997. « Les méthodes classiques de prévention des lésions au dos, la démarche partenariale et l’outil d’identification des facteurs de risques ». Communication lors de la conférence : Présentation à des inspecteurs, des conseillers en réadaptation de la CSST et à des conseillers aux établissements de l’ASP Transport-Entreposage (Montréal, QC, Canada, 27 janv. et 15 juil. 1997).

Nadeau, Sylvie et Hallé, Stéphane. 2007. « La prise en charge de la santé et de la sécurité du travail par les ingénieurs industriels – une obligation professionnelle ». Communication lors de la conférence : Congrès National de la Société Canadienne de Génie Industriel (Montréal, QC, Canada, 11-13 jan. 2007).

Nadeau, Sylvie et Hallé, Stéphane. 2015. « Mines ultra-profondes : quand la chaleur et l’humidité deviennent intenables ». Communication lors de la conférence : Expo Hightex 2015 (Boucherville, QC, Canada, 25-26 mars 2015).

Nadeau, Sylvie, Hallé, Stéphane et Debia, Maximilien. 2011. « Comment améliorer le développement des nanomatériaux au Québec ». Communication lors de la conférence : Atelier nanomatériaux (Montréal, QC, Canada, 3 juin 2011).

Nadeau, Sylvie et Mongrain, D.. 2001. « La prévention des maux de dos : de l'entreprise à la recherche, un parcours professionnel ». Communication lors de la conférence : National Congress of IIE Canadian Chapter (Montreal, QC, Canada, Jan. 24-26, 2001).

Nadeau, Sylvie et Morency, François. 2016. « Dégivrer des avions au sol : une activité méconnue et pourtant essentielle ». Communication lors de la conférence : Journées santé, sécurité et mieux-être de l'ÉTS (Montréal, QC, Canada, 12 mai 2016).

Nadeau, Sylvie et Morency, François. 2016. « Membres chercheurs – universitaires: Comment les apprivoiser? ». Communication lors de la conférence : 38e congrès de l'AQHSST : comportements sécuritaires, les tiens, les miens, les nôtres (Shawinigan, QC, Canada, 18-20 mai 2016).

Nadeau, Sylvie, Viau, Claude, Camus, Michel, Hallé, Stéphane, Cloutier, Yves et Ateme-Nguema, Barthélemy. 2010. « Aides à la décision : méthodes à l'apparence impénétrable démystifiées : partie 1 : techniques analytiques des environnements risqués ». Communication lors de la conférence : Département de Santé Environnementale et Santé au Travail : Faculté de Médecine : Rencontres Scientifiques (Montréal, Québec, Canada, 17 nov. 2010).

Nadeau, Sylvie, Viau, Claude, Hallé, Stéphane et Ateme-Nguema, Barthélemy. 2011. « Les risques pour la santé humaine posés par les nanoparticules : pourquoi privilégier une gestion adaptative ? ». Communication lors de la conférence : Axe Nanotoxicologie du RRSSTQ, 4 mai 2011).

Ngô, V., Nadeau, S. et Hallé, S.. 2016. « Facteurs humains appliqués au développement d’une veste refroidissante ». Communication lors de la conférence : Conférence mensuelles en sécurité du travail et contrôle des risques industriels, ÉREST, ÉTS, AQHSST (Montréal, QC, Canada, 16 juin 2016).

Ngô, V., Nadeau, S. et Hallé, S.. 2018. « Usability testing for ergonomic criteria matrix: case study of a deep cooling vest ». Communication lors de la conférence : 32nd Triennial Congress of the International Commission on Occupational Health (ICOH) (Dublin, Ireland, April 29-May 4, 2018).

Thévény, L. et Nadeau, Sylvie. 2003. « Les diverses formes de collaboration et les facteurs de réussite ». Communication lors de la conférence : 2e Séminaire international sur l'enseignement en santé-sécurité au travail de l'Association Internationale de la sécurité sociale (AISS) (Québec, QC, Canada, 6-9 oct. 2003).

Tiaya, C., Nadeau, S., Boton, C. et Rivest, L.. 2023. « Maquettes numériques comme outil de prévention par la conception des risques de SST de la phase d’exploitation et de maintenance des ouvrages industriels ». Communication lors de la conférence : Groupe BIM du Québec : Soirée conférence - Impact social et économique (Montréal, QC, Canada, 21 juin 2023).

Rapport technique

Emami-Mehrgani, Behnam, Badri, Adel et Nadeau, Sylvie. 2011. « Établissement d'un portrait de risques, secteur du démantèlement de véhicules ». Montréal, Québec, Canada : École de technologie supérieure, Université du Québec. 88 p.

Fatisson, Julien, Hallé, Stéphane, Nadeau, Sylvie, Viau, Claude, Camus, Michel, Ateme-Nguema, Barthélemy et Cloutier, Yves. 2013. « Nanoparticules synthétiques : Gestion adaptative des risques à la santé et à la sécurité des travailleurs ». Coll. « Études et recherches », vol. R-798. Montréal, (Québec) : IRSST.

Gilbert, Robert, Leblanc, Daniel et Nadeau, Sylvie. 2001. « Analyse comparative des principales méthodes d'évaluation des risques de maux de dos et préparation d'une grille d'identification des facteurs de risques ». Coll. « Études et recherches », vol. R-261. Montréal : IRSST. 71 p.

Lavoie, Jacques, Marchand, Geneviève, Cloutier, Yves, Beaudet, Yves, Hallé, Stéphane, Nadeau, Sylvie, Pichette, Gilbert et Duchaine, Caroline. 2015. « Bronchoscopie en milieu hospitalier : Évaluation des expositions aux bioaérosols ». Coll. « Études et recherches », vol. R-879. IRSST.

Lortie, Monique, Nadeau, Sylvie et Vezeau, Steve. 2016. « Solutions visant l’amélioration des conditions de santé et de sécurité des poseurs de revêtements de sol ». Coll. « Études et recherches », vol. R-900. Montréal : IRSST. 77 p.

Vu-Khanh, Toan, Dolez, Patricia, Harrabi, L, Lara, J, Larivière, C, Tremblay, G et Nadeau, Sylvie. 2007. « Caractérisation de la souplesse des gants de protection par des méthodes mécaniques et une méthode biomécanique basée sur l'électromyographie de surface ». Coll. « Études et Recherches », vol. R-506. Montréal : Institut de recherche Robert-Sauvé en santé et en sécurité du travail du Québec. 85 p.

Mémoire ou thèse

Nadeau, Sylvie. 2001. « Outil d'analyse multifactorielle pour la prévention des lésions au dos ». Thèse de doctorat. Montréal, (Québec), École Polytechnique de Montréal

Cette liste a été générée le Thu Mar 28 01:43:39 2024 EDT.