Liste des publications de "Terriault, Patrick"

2023

Timercan, Anatolie, Terriault, Patrick et Brailovski, Vladimir. 2023. « Axial tension/compression and torsional loading of diamond and gyroid lattice structures for biomedical implants: Simulation and experiment ». Materials and Design, vol. 225.
Compte des citations dans Scopus : 13.

2022

Terriault, Patrick, Kozanitis, Anastassis et Farand, Patrice. 2022. « Étude comparative des performances académiques d’étudiants exposés à une classe inversée ou traditionnelle : Méthodologie et résultats préliminaires ». In Canadian Engineering Education Association (CEEA) Conference (Toronto, ON, Canada, June 18-22, 2022) Canadian Engineering Education Association.

2021

Doré, Sylvie, Seniuk Cicek, Jillian, Jamieson, Marnie V., Terriault, Patrick, Belleau, Christian et Bezerra Rodrigues, Renato. 2021. « What is an engineer: Study description and codeboook development ». In Proceedings of the Canadian Engineering Education Association (CEEA) (Charlottetown, PE, Canada, June 20-23, 2021) Canadian Engineering Education Association.

Terriault, Patrick, Kozanitis, Anastassis et Farand, Patrice. 2021. « Use of electrodermal wristbands to measure students' cognitive engagement in the classroom ». In Proceedings of the Canadian Engineering Education Association (CEEA) (Charlottetown, PE, Canada, June 20-23, 2021) Canadian Engineering Education Association.

2020

Poulin, J. R., Kreitcberg, A., Terriault, P. et Brailovski, V.. 2020. « Fatigue strength prediction of laser powder bed fusion processed Inconel 625 specimens with intentionally-seeded porosity: Feasibility study ». International Journal of Fatigue, vol. 132.
Compte des citations dans Scopus : 29.

Poulin, Jean-René, Letenneur, Morgan, Terriault, Patrick et Brailovski, Vladimir. 2020. « Influence of intentionally induced porosity and postprocessing conditions on the mechanical properties of laser powder bed–fused Inconel 625 ». In Structural Integrity of Additive Manufactured Parts. pp. 294-312. West Conshohocken, PA : ASTM International.
Compte des citations dans Scopus : 2.

2019

Doré, Sylvie, Terriault, Patrick et Belleau, Christian. 2019. « Gathering the voice of the students for accreditation purposes through their definition of “engineer” ». In Proceedings 2019 Canadian Engineering Education Association (CEEA-ACEG19) Conference (Ottawa, ON, Canada, June 9-12, 2019) Canadian Engineering Education Association.

Poulin, J.-R., Kreitcberg, A., Terriault, P. et Brailovski, V.. 2019. « Long fatigue crack propagation behavior of laser powder bed-fused inconel 625 with intentionally-seeded porosity ». International Journal of Fatigue, vol. 127. pp. 144-156.
Compte des citations dans Scopus : 48.

Poulin, Jean-Rene, Terriault, Patrick et Brailovski, Vladimir. 2019. « Implementation of the kitagawa-takahashi approach for prediction of fatigue limit of inconel 625 components containing intentionally-seeded defects ». Communication lors de la conférence : 2nd HI-AM Conference : Holistic Innovation In Additive Manufacturing (Vancouver, BC, Canada, June 26-27, 2019).

Samoilenko, Mykhailo, Seers, Patrice, Terriault, Patrick et Brailovski, Vladimir. 2019. « Design, manufacture and testing of porous materials with ordered and random porosity: Application to porous medium burner ». Affiche numéro 35 présentée lors de la conférence : 2nd HI-AM Conference : Holistic Innovation In Additive Manufacturing (Vancouver, BC, Canada, June 26-27, 2019).

Samoilenko, Mykhailo, Seers, Patrice, Terriault, Patrick et Brailovski, Vladimir. 2019. « Design, manufacture and testing of porous materials with ordered and random porosity: application to porous medium burners ». Applied Thermal Engineering, vol. 158.
Compte des citations dans Scopus : 28.

Terriault, Patrick. 2019. « Apprentissage actif fondé sur la classe inversée dans un cours de génie mécanique ». In Proceedings 2019 Canadian Engineering Education Association (CEEA-ACEG19) Conference (Ottawa, ON, Canada, June 9-12, 2019) Canadian Engineering Education Association.

2018

Jetté, Bruno, Brailovski, Vladimir, Dumas, Mathieu, Simoneau, Charles et Terriault, Patrick. 2018. « Femoral stem incorporating a diamond cubic lattice structure: Design, manufacture and testing ». Journal of the Mechanical Behavior of Biomedical Materials, vol. 77. pp. 58-72.
Compte des citations dans Scopus : 80.

Jetté, Bruno, Brailovski, Vladimir, Simoneau, Charles, Dumas, Mathieu et Terriault, Patrick. 2018. « Development and in vitro validation of a simplified numerical model for the design of a biomimetic femoral stem ». Journal of the Mechanical Behavior of Biomedical Materials, vol. 77. pp. 539-550.
Compte des citations dans Scopus : 43.

Khodaei, Hamid et Terriault, Patrick. 2018. « Experimental validation of shape memory material model implemented in commercial finite element software under multiaxial loading ». Journal of Intelligent Material Systems and Structures, vol. 29, nº 14. pp. 2954-2965.
Compte des citations dans Scopus : 5.

Poulin, J. R., Brailovski, V. et Terriault, P.. 2018. « Long fatigue crack propagation behavior of Inconel 625 processed by laser powder bed fusion: Influence of build orientation and post-processing conditions ». International Journal of Fatigue, vol. 116. pp. 634-647.
Compte des citations dans Scopus : 54.

Soul, Hugo, Terriault, Patrick et Brailovski, Vladimir. 2018. « The static and fatigue behavior of AlSiMg alloy plain, notched, and diamond lattice specimens fabricated by laser powder bed fusion ». Journal of Manufacturing and Materials Processing, vol. 2, nº 2.
Compte des citations dans Scopus : 9.

Terriault, Patrick et Brailovski, Vladimir. 2018. « Modeling and simulation of large, conformal, porosity-graded and lightweight lattice structures made by additive manufacturing ». Finite Elements in Analysis and Design, vol. 138. pp. 1-11.
Compte des citations dans Scopus : 28.

2017

Brailovski, Vladimir, Terriault, Patrick, Simoneau, Charles, Dumas, Mathieu et Jetté, Bruno. 2017. « Development of a biomimetic metallic femoral stem: Methodological approach ». In International conference on processing and manufacturing of advanced materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) Coll. « Materials Science Forum », vol. 879. pp. 1788-1793. Trans Tech Publications.
Compte des citations dans Scopus : 4.

Dumas, Mathieu, Terriault, Patrick et Brailovski, Vladimir. 2017. « Modelling and characterization of a porosity graded lattice structure for additively manufactured biomaterials ». Materials and Design, vol. 121. pp. 383-392.
Compte des citations dans Scopus : 142.

Poulin, Jean-René, Terriault, Patrick, Dubé, Martine et Vachon, Pierre-Luc. 2017. « Development of a morphing wing extrados made of composite materials and actuated by shape memory alloys ». Journal of Intelligent Material Systems and Structures, vol. 28, nº 11. pp. 1437-1453.
Compte des citations dans Scopus : 2.

Simoneau, Charles, Terriault, Patrick, Jetté, Bruno, Dumas, Mathieu et Brailovski, Vladimir. 2017. « Development of a porous metallic femoral stem: Design, manufacturing, simulation and mechanical testing ». Materials and Design, vol. 114. pp. 546-556.
Compte des citations dans Scopus : 84.

Terriault, Patrick et Brailovski, Vladimir. 2017. « Influence of boundary conditions on the simulation of a diamond-type lattice structure: A preliminary study ». Advances in Materials Science and Engineering, vol. 2017.
Compte des citations dans Scopus : 3.

2016

Brailovski, V. et Terriault, P.. 2016. « Metallic porous materials for orthopedic implants: functional requirements, manufacture, characterization, and modeling ». In Reference Module in Materials Science and Materials Engineering. Elsevier.

Dumas, Mathieu, Terriault, Patrick et Brailovski, Vladimir. 2016. « Modeling and simulation of porous structures for load-bearing implants ». Affiche numéro P.0892 présentée lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016).

Simoneau, C., Brailovski, V. et Terriault, P.. 2016. « Design, manufacture and tensile properties of stochastic porous metallic structures ». Mechanics of Materials, vol. 94. pp. 26-37.
Compte des citations dans Scopus : 22.

Simoneau, Charles, Terriault, Patrick et Brailovski, Vladimir. 2016. « Stochastic porous metallic structures for biomedical application: mesoscale modeling, manufacturing and testing ». Affiche numéro P.0927 présentée lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016).

2015

Bernier, G., Petit, Y., Marchand, F., Terriault, P. et Nadeau, S.. 2015. « Chapter 9: Case study : Toy design ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 79-86. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Brailovski, V., Terriault, P., Prokoshkin, S., Simoneau, C., Rivard, J. et Dubinskiy, S.. 2015. « Superelastic nickel-free porous materials for load-bearing medical implants: fabrication and modeling ». [Article de conférence]. Materials Today: Proceedings, vol. 2, nº Supp. 3. S511-S516.
Compte des citations dans Scopus : 1.

Jetté, Bruno, Fréchette, Guillaume, Guillemette, Olivier, Gaudreau, Robin, Simoneau, Charles, Terriault, Patrick et Brailovski, Vladimir. 19 août 2015. « Comment prolonger la durée de vie des prothèses de la hanche? ». [Article de recherche]. Substance ÉTS.

Jetté, Bruno, Fréchette, Guillaume, Guillemette, Olivier, Gaudreau, Robin, Simoneau, Charles, Terriault, Patrick et Brailovski, Vladimir. 19 août 2015. « Increasing Hip Prostheses’ Lifespan ». [Article de recherche]. Substance ÉTS.

Lacasse, Simon, Terriault, Patrick, Simoneau, Charles et Brailovski, Vladimir. 2015. « Design, manufacturing, and testing of an adaptive composite panel with embedded shape memory alloy actuators ». Journal of Intelligent Material Systems and Structures, vol. 26, nº 15. pp. 2055-2072.
Compte des citations dans Scopus : 12.

Simoneau, C., Terriault, P. et Brailovski, V.. 2015. « Modeling and additive manufacturing of open-cell random-porosity structures for biomedical applications ». In International Conference on Porous Metals and Metallic Foams Technology (METFOAM 2015) (Barcelona, Spain, Aug. 31-Sept. 2, 2015)

Simoneau, C., Terriault, P. et Brailovski, V.. 2015. « Modeling and additive manufacturing of open-cell random-porosity structures for biomedical applications ». Affiche numéro P-34 présentée lors de la conférence : International Conference on Porous Metals and Metallic foams Technology (METFOAM 2015) (Barcelona, Spain, Aug. 31-Sept. 2, 2015).

Terriault, P. et Brailovski, V.. 2015. « Influence of boundary conditions on the simulation of architectured porous structures ». In International Conference on Porous Metals and Metallic Foams Technology (METFOAM 2015) (Barcelone, Spain, Aug. 31-Sept. 2, 2015)

Terriault, P. et Brailovski, V.. 2015. « Influence of boundary conditions on the simulation of architectured porous structures ». Affiche numéro P-101 présentée lors de la conférence : International Conference on Porous Metals and Metallic foams Technology (METFOAM 2015) (Barcelone, Spain, Aug. 31-Sept. 2, 2015).

2014

Brailovski, Vladimir, Terriault, Patrick, Prokoshkin, Sergei, Rivard, Jonathan, Simoneau, Charles et Dubinskiy, Sergei. 2014. « Superelastic nickel-free porous materials for load-bearing medical implants: fabrication and modeling ». In International conference on martensitic transformation (ICOMAT 2014) (Bilbao, Spain, July 6-11, 2014)

Casciati, Sara, Isalgue, Antonio, Torra, Vincenc et Terriault, Patrick. 2014. « SMA passive elements for damping in the stayed cables of bridges ». In Mechanics and Model-Based Control of Advanced Engineering Systems. pp. 75-83. Springer.
Compte des citations dans Scopus : 4.

Maitrejean, Guillaume, Terriault, Patrick, Devis Capilla, Diego et Brailovski, Vladimir. 2014. « Unit cell analysis of the superelastic behavior of open-cell tetrakaidecahedral shape memory alloy foam under quasi-static loading ». Smart Materials Research. p. 870649.

Simoneau, Charles, Terriault, Patrick, Lacasse, Simon et Brailovski, Vladimir. 2014. « Adaptive composite panel with embedded SMA actuators: Modeling and validation ». Mechanics Based Design of Structures and Machines, vol. 42, nº 2. pp. 174-192.
Compte des citations dans Scopus : 18.

Simoneau, Charles, Terriault, Patrick, Rivard, Jonathan et Brailovski, Vladimir. 2014. « Modeling of metallic foam morphology using the Representative Volume Element approach: Development and experimental validation ». International Journal of Solids and Structures, vol. 51, nº 21-22. pp. 3633-3641.
Compte des citations dans Scopus : 7.

Terriault, Patrick. 2014. « Développement de surfaces adaptatives pour des applications aéronautiques ». Communication lors de la conférence : Entretiens Jacques Cartiers "Colloque 12 - Les matériaux intelligents et leur impact sur notre qualité de vie" (Montréal, QC, Canada, 6 oct. 2014).

Terriault, Patrick. 2014. « Modélisation multi-échelle de structres poreuses superélastiques ». Communication lors de la conférence : Séminaire du laboratoire Techniques de l’Ingénierie Médicale et de la Complexité - Informatique, Mathématiques et Applications (TIMC-IMAG), Université Joseph Fourier (Grenoble, France, 13 mai 2014).

Torra, Vicenc, Carreras, Guillem, Casciati, Sara et Terriault, Patrick. 2014. « On the NiTi wires in dampers for stayed cables ». Smart Structures and Systems, vol. 13, nº 3. pp. 353-374.
Compte des citations dans Scopus : 51.

2013

Baril, Yannick, Brailovski, Vladimir, Cartier, Raymond et Terriault, Patrick (inventeurs) 17 décembre 2013. « Binding component ». École de technologie supérieure (titulaire(s)). Brevet canadien CA 2587737. [Titre traduit: Composant de liaison].

Georges, T., Brailovski, Vladimir et Terriault, Patrick. 2013. « Experimental bench for shape memory alloys actuators design and testing ». Experimental Techniques, vol. 37, nº 6. pp. 24-33.
Compte des citations dans Scopus : 5.

Maîtrejean, Guillaume, Terriault, Patrick et Brailovski, Vladimir. 2013. « Density dependence of the macroscale superelastic behavior of porous shape memory alloys: a two-dimensional approach ». Smart Materials Research, vol. 2013.

Maitrejean, Guillaume, Terriault, Patrick et Brailovski, Vladimir. 2013. « Density dependence of the superelastic behavior of porous shape memory alloys: Representative Volume Element and scaling relation approaches ». Computational Materials Science, vol. 77. pp. 93-101.
Compte des citations dans Scopus : 19.

Terriault, Patrick et Brailovski, Vladimir. 2013. « Implementation of Likhachev's model into a finite element program ». In European Symposium on Martensitic Transformations (Saint-Petersburg, Russia, Sept. 9-16, 2012) Coll. « Materials Science Forum », vol. 738-739. pp. 160-164. Trans Tech Publications Ltd.
Compte des citations dans Scopus : 4.

Terriault, Patrick, Lacasse, Simon, Simoneau, Charles et Brailovski, Vladimir. 2013. « Adaptive composite panel with embedded SMA actuators: design, manufacturing, testing ». In 19th International Conference on Composite Materials (ICCM19) (Montreal, QC, Canada, July 28-Aug. 2, 2013) pp. 5745-5753. International Committee on Composite Materials.

Torra, V., Auguet, C., Isalgue, A., Carreras, G., Terriault, Patrick et Lovey, F. C.. 2013. « Built in dampers for stayed cables in bridges via SMA. The SMARTeR-ESF project: A mesoscopic and macroscopic experimental analysis with numerical simulations ». Engineering Structures, vol. 49. pp. 43-57.
Compte des citations dans Scopus : 62.

Torra, V., Isalgue, A., Auguet, C., Carreras, G., Lovey, F. C. et Terriault, Patrick. 2013. « Damping in civil engineering using SMA part 2 - Particular properties of NiTi for damping of stayed cables in bridges ». Canadian Metallurgical Quarterly, vol. 52, nº 1. pp. 81-89.
Compte des citations dans Scopus : 15.

Vachon, Pierre-Luc, Brailovski, Vladimir et Terriault, Patrick. 2013. « Impact-induced damage and damage propagation under flexural load in TiNi and Kevlar-stitched carbon/epoxy laminates ». Composite Structures, vol. 100. pp. 424-435.
Compte des citations dans Scopus : 17.

Vachon, Pierre-Luc, Brailovski, Vladimir et Terriault, Patrick. 2013. « Prediction of the propagation of impact-induced delamination in carbon/epoxy laminates ». Composite Structures, vol. 95. pp. 227-235.
Compte des citations dans Scopus : 9.

2012

Brailovski, Vladimir, Cartier, Raymond, Terriault, Patrick et Baril, Yannick (inventeurs) 13 novembre 2012. « Binding component ». École de technologie supérieure (titulaire(s)). Brevet américain US 8,308,761.

Georges, T., Brailovski, V. et Terriault, P.. 2012. « Characterization and design of antagonistic shape memory alloy actuators ». Smart Materials and Structures, vol. 21, nº 3.
Compte des citations dans Scopus : 28.

Torra, Vicenc, Auguet, Carlota, Carreras, Guillem, Dieng, Lamine, Lovey, Francisco C. et Terriault, Patrick. 2012. « The SMA: An effective damper in Civil Engineering that smoothes oscillations ». In THERMEC 2011 (Quebec, QC, Canada, Aug. 1-5, 2012) Coll. « Materials Science Forum », vol. 706-709. pp. 2020-2025. Trans Tech Publications Ltd.
Compte des citations dans Scopus : 12.

Torra, Vicenç, Isalgue, Antonio, Auguet, Carlota, Casciati, Fabio, Casciati, Sara et Terriault, Patrick. 2012. « SMA dampers for cable vibration: An available solution for oscillation mitigation of stayed cables in bridges ». In State-of-the-Art Research and Application of SMAs Technologies (Montecatini Terme, Italy, June 10-12, 2012) Coll. « Advances in Science and Technology », vol. 78. pp. 92-102. Trans Tech Publications Ltd.

2011

Coutu, Daniel, Brailovski, Vladimir, Terriault, Patrick, Mamou, Mahmoud et Mébarki, Youssef. 2011. « Aerostructural model for morphing laminar wing optimization in a wind tunnel ». Journal of Aircraft, vol. 48, nº 1. pp. 66-76.
Compte des citations dans Scopus : 15.

Coutu, Daniel, Brailovski, Vladimir, Terriault, Patrick, Mamou, Mahmoud, Mébarki, Youssef et Laurendeau, Éric. 2011. « Lift-to-drag ratio and laminar flow control of a morphing laminar wing in a wind tunnel ». Smart Materials and Structures, vol. 20, nº 3.
Compte des citations dans Scopus : 6.

Fischer, Charles, Terriault, Patrick et Brailovski, Vladimir. 2011. « Debonding characterization of SMA/polymer morphing structures ». In THERMEC 2011 Supplement (Quebec City, QC, Canada, Aug. 1-5, 2011) Coll. « Advanced Materials Research », vol. 409. pp. 621-626. Germany : Trans Tech Publications.
Compte des citations dans Scopus : 3.

Georges, Thomas, Brailovski, Vladimir et Terriault, Patrick. 2011. « Design of active bias SMA actuators for morphing wing applications ». In THERMEC 2011 Supplement (Quebec City, QC, Canada, Aug. 1-5, 2011) Coll. « Advanced Materials Research », vol. 409. pp. 627-632. Germany : Trans Tech Publications.
Compte des citations dans Scopus : 2.

Terriault, Patrick et Brailovski, Vladimir. 2011. « Modeling of shape memory alloy actuators using Likhachev's formulation ». Journal of Intelligent Material Systems and Structures, vol. 22, nº 4. pp. 353-368.
Compte des citations dans Scopus : 24.

Torra, Vicenc, Isalgue, Antonio, Auguet, Carlota, Carreras, Guillem, Casciati, Fabio, Lovey, Francisco C. et Terriault, Patrick. 2011. « SMA in mitigation of extreme loads in civil engineering : study of their application in a realistic steel portico ». In 3rd International Workshop on Performance, Protection and Strengthening of Structures under Extreme Loading, (PROTECT) (Lugano, Switzerland, Aug. 30-Sept. 1, 2011) Coll. « Applied Mechanics and Materials », vol. 82. pp. 278-283. Trans Tech Publications.
Compte des citations dans Scopus : 3.

Torra, Vicenç, Isalgue, Antonio, Auguet, Carlota, Carreras, Guillem, Lovey, Francisco C., Terriault, Patrick et Dieng, Lamine. 2011. « SMA in mitigation of extreme loads in civil engineering : damping actions in stayed cables ». In 3rd International Workshop on Performance, Protection and Strengthening of Structures under Extreme Loading (PROTECT) (Lugano, Switzerland, Aug. 30-Sept. 1, 2011) Coll. « Applied Mechanics and Materials », vol. 82. pp. 539-544. Lugano, Switzerland : Trans Tech Publications.
Compte des citations dans Scopus : 16.

2010

Bernier, G., Petit, Yvan, Marchand, Françoise, Terriault, Patrick et Nadeau, Sylvie. 2010. « Case study : toy design ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. pp. 74-82. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Brailovski, Vladimir et Terriault, Patrick. 2010. « A systematic approach to performance evaluation of shape memory alloys as actuator material ». In 6th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Berlin, Germany, Aug. 25-29, 2009) Coll. « Materials Science Forum », vol. 638-642. pp. 2034-2039. Berlin, Germany : Trans Tech Publications Ltd.
Compte des citations dans Scopus : 3.

Brailovski, Vladimir, Terriault, Patrick, Georges, Thomas et Coutu, Daniel. 2010. « SMA actuators for morphing wings ». In 3rd International Symposium on Shape Memory Materials for Smart Systems/E-MRS 2010 Spring Meeting (Strasbourg, France, June 7-10, 2010) Coll. « Physics Procedia », vol. 10. pp. 197-203. Amsterdam, Netherlands : Elsevier.
Compte des citations dans Scopus : 49.

Coutu, Daniel, Brailovski, Vladimir et Terriault, Patrick. 2010. « Optimized design of an active extrados structure for an experimental morphing laminar wing ». Aerospace Science and Technology, vol. 14, nº 7. pp. 451-458.
Compte des citations dans Scopus : 44.

Lê, Van Ngan, Champliaud, Henri, Marchand, Françoise, Terriault, Patrick et Arteau, Jean. 2010. « Effective learning of buckling of columns in engineering programs ». Communication lors de la conférence : XI International Conference on Engineering and Technology Education (INTERTECH) (Ilheus, Bahia, Brazil, Mar. 7-10, 2010).

Lê, Van Ngan, Champliaud, Henri, Marchand, Françoise, Terriault, Patrick et Arteau, Jean. 2010. « Effective learning of buckling of columns in engineering programs ». In Proceedings of international conference on engineering and technology education (Ilheus, Bahia, Brazil, Mar. 7-10, 2010) pp. 143-147.

Mamou, M., Mebarki, Y., Khalid, M., Genest, M., Coutu, D., Popov, A. V., Sainmont, C., Georges, T., Grigorie, L., Botez, Ruxandra, Brailovski, Vladimir, Terriault, Patrick, Paraschivoiu, I. et Laurendeau, E.. 2010. « Aerodynamic performance optimization of a wind tunnel morphing wing model subject to various cruise flow conditions ». In 27th Congress of the International Council of the Aeronautical Sciences 2010, ICAS 2010 (Nice, France, Sept. 19-24, 2010) pp. 1137-1161. ICAS Secretariat.
Compte des citations dans Scopus : 10.

Torra, V., Isalgue, A., Carreras, G., Lovey, F. C., Soul, H., Terriault, P. et Dieng, L.. 2010. « Experimental study of damping in civil engineering structures using smart materials (NiTi - SMA). Application to stayed cables for bridges ». International Review of Mechanical Engineering, vol. 4, nº 5. pp. 601-611.
Compte des citations dans Scopus : 11.

Torra, Vicenc, Isalgue, Antonio, Martorell, Ferran, Lovey, Francisco C. et Terriault, Patrick. 2010. « Damping in civil engineering using SMA. Part I : Particular properties of CuAlBe for damping of family houses ». Canadian Metallurgical Quarterly, vol. 49, nº 2. pp. 179-190.
Compte des citations dans Scopus : 12.

Torra, Vicenc, Lovey, Francisco C. et Terriault, Patrick. 2010. « Experimental study of damping in civil engineering structures using smart materials (Cu-Al-Be – NiTi SMA), applications to steel portico and to stayed cables for bridges (The SMARTeR project) ». In Proceedings of the School and Symposium on Smart Structural Systems Technologies (Porto, Portugal, Apr. 6-9, 2010) pp. 369-399.

Vachon, Pierre-Luc, Brailovski, Vladimir et Terriault, Patrick. 2010. « Suppression of delamination propagation in carbon/epoxy laminates by use of superelastic stitching wires : preliminary results ». In Proceedings of the Eighth Joint Canada-Japan Workshop on Composites : Design, Manufacturing and Applications of Composites (Montréal, Canada, July 26-28, 2010) pp. 286-296. Lancaster, Pa., USA : DEStech Publications, inc..

2009

Baril, Yannick, Brailovski, Vladimir, Chartrand, M., Terriault, Patrick et Cartier, R.. 2009. « Median sternotomy : comparative testing of braided superelastic and monofilament stainless steel sternal sutures ». Proceedings of the Institution of Mechanical Engineers, Part H : Journal of Engineering in Medicine, vol. 223, nº H3. pp. 363-374.
Compte des citations dans Scopus : 6.

Coutu, Daniel, Brailovski, Vladimir et Terriault, Patrick. 2009. « Promising benefits of an active-extrados morphing laminar wing ». Journal of Aircraft, vol. 46, nº 2. pp. 730-731.
Compte des citations dans Scopus : 35.

Coutu, Daniel, Brailovski, Vladimir, Terriault, Patrick, Mamou, Mahmoud et Laurendeau, Éric. 2009. « Real-time optimization of a research morphing laminar wing in a wind tunnel ». In ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) (Oxnard, CA, USA, Sept. 21-23, 2009) Coll. « ASME Conference Proceedings » pp. 203-209. New York, NY, USA : American Society of Mechanical Engineers.
Compte des citations dans Scopus : 5.

Georges, Thomas, Brailovski, Vladimir, Morellon, Emeric, Coutu, Daniel et Terriault, Patrick. 2009. « Design of shape memory alloy actuators for morphing laminar wing with flexible extrados ». Journal of Mechanical Design, vol. 131, nº 9. 0910061-0910069.
Compte des citations dans Scopus : 51.

Georges, Thomas, Brailovski, Vladimir, Morellon, Emeric, Coutu, Daniel et Terriault, Patrick. 2009. « Wind-tunnel testing of shape memory alloys actuators as morphing wing driving systems ». In ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) (Oxnard, CA, USA, Sept. 21-23, 2009) Coll. « ASME Conference Proceedings » pp. 169-174. New York, NY, USA : American Society of Mechanical Engineers.
Compte des citations dans Scopus : 5.

Paradis, A., Terriault, Patrick et Brailovski, Vladimir. 2009. « Modeling of residual strain accumulation of NiTi shape memory alloys under uniaxial cyclic loading ». Computational Materials Science, vol. 47, nº 2. pp. 373-383.
Compte des citations dans Scopus : 26.

Torra, Vicenc, Isalgue, Antonio, Auguet, C., Carreras, G., Lovey, Francisco C., Soul, H. et Terriault, Patrick. 2009. « Damping in civil engineering using SMA. The fatigue behavior and stability of CuAlBe and NiTi alloys ». Journal of Materials Engineering and Performance, vol. 18, nº 5-6. pp. 738-745.
Compte des citations dans Scopus : 30.

Torra, Vicenc, Isalgue, Antonio, Carreras, G., Lovey, Francisco C., Soul, H., Terriault, Patrick et Zapico, B.. 2009. « The SMA properties in civil engineering applications. The SMARTeR project : use of SMA in damping of stayed cables for bridges ». In 8th European Symposium on Martensitic Transformations (ESOMAT) (Prague, Czech Republic, Sept. 7-11, 2009) Cedex A, France : E D P Sciences.

Torra, Vicenc, Isalgue, Antonio, Martorell, Ferran, Casciati, F., Lovey, Francisco C., Peigney, M., Terriault, Patrick, Tirelli, D. et Zapico, B.. 2009. « SMA in mitigation of extreme loads in civil engineering : damping of earthquake effects in family Houses ans in wind/rain actions for stayed cables in bridges ». In Proceedings of Protect 2009 : Performance, Protection & Strengthening of Structures under Extreme Loading (Hayama, Japan, Aug. 19-21, 2009)

Vachon, Pierre-Luc, Brailovski, Vladimir et Terriault, Patrick. 2009. « Modeling of delamination initiation and propagation in composite laminates under monotonic tensile loading using the progressive damage modeling technique ». Science and Engineering of Composite Materials, vol. 16, nº 2. pp. 99-114.
Compte des citations dans Scopus : 4.

2008

Baril, Y., Brailovski, Vladimir, Chartrand, M., Terriault, Patrick et Cartier, R.. 2008. « In-vitro testing of a new superelastic sternum closure component ». In SMST-2007: Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Tsukuba, Japan, Dec. 2-5, 2007) pp. 497-505. Materials Park, OH : ASM International.

Baril, Y., Brailovski, Vladimir, Terriault, Patrick et Cartier, R.. 2008. « Modeling and testing of a new sternal closure device using tubular mesh-like superelastic nitinol structure ». In SMST-2006 : Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Pacific Grove, CA, USA, May 7-11, 2006) pp. 665-680. Materials Park, OH : ASM International.
Compte des citations dans Scopus : 1.

Baril, Yannick, Brailovski, Vladimir et Terriault, Patrick. 2008. « Fatigue properties of superelastic Ti-Ni filaments used in braided cables for bone fixation ». In Biomedical Applications of Smart Materials (Acireale, Sicily, Italy, June 8-13, 2008) Coll. « Advances in Science and Technology », vol. 57. pp. 235-240. Stafa-Zurich : Trans Tech Publications Ltd.

Brailovski, Vladimir, Terriault, Patrick, Coutu, D., Georges, T., Morellon, E., Fischer, C. et Bérubé, S.. 2008. « Morphing laminar wing with flexible extrados powered by shape memory alloy actuators ». In ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) (Ellicott, USA, Oct. 28-30, 2008) pp. 615-623. New York, NY, USA : American Society of Mechanical Engineers.
Compte des citations dans Scopus : 34.

Georges, T., Brailovski, Vladimir, Coutu, D. et Terriault, Patrick. 2008. « Design diagram for linear SMA actuators integrated in a morphing wing structure ». In SMST-2007: Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Tsukuba, Japan, Dec. 2-5, 2007) pp. 455-462. Materials Park, OH : ASM International.
Compte des citations dans Scopus : 8.

Jaber, M. B., Smaoui, H. et Terriault, Patrick. 2008. « Finite element analysis of a shape memory alloy three-dimensional beam based on a finite strain description ». Smart Materials and Structures, vol. 17, nº 4.
Compte des citations dans Scopus : 40.

Lafortune, P., Terriault, Patrick, Brailovski, Vladimir et Torra, V.. 2008. « Superelasticity-related phenomena of shape memory alloy passive dampers ». In SMST-2006 : Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Pacific Grove, CA, USA, May 7-11, 2006) pp. 507-524. Materials Park, OH : ASM International.

Martorell, F., Torra, V., Isalgue, A., Perea, M. Li, Terriault, Patrick et Lovey, F. C.. 2008. « Damping by SMA in civil engineering structures ». In Emboding Intelligence in Structures and Integrated Systems (Acireale, Sicily, Italy, June 8-13, 2008) Coll. « Advances in Science and Technology », vol. 56. pp. 92-97. Uetikon-Zuerich, Switzerland : Trans Tech Publications Ltd.
Compte des citations dans Scopus : 1.

Paradis, A., Terriault, Patrick, Brailovski, Vladimir et Torra, V.. 2008. « On the partial recovery of residual strain accumulated during an interrupted cyclic loading of NiTi shape memory alloys ». Smart Materials and Structures, vol. 17, nº 6.
Compte des citations dans Scopus : 6.

Terriault, Patrick, Lafortune, P., Plamondon, Dominic et Brailovski, Vladimir. 2008. « Design of a progressively expandable stent using finite elements ». In Biomedical Applications of Smart Materials (Acireale, Sicily, Italy, June 8-13, 2008) Coll. « Advances in Science and Technology », vol. 57. pp. 241-246. Uetikon-Zuerich, Switzerland : Trans Tech Publications Ltd.

Torra, V, Isalgue, A, Auguet, C, Lovey, F.C, Pelegrina, J.L et Terriault, Patrick. 2008. « Pre-stressed NiTi: effects of the thermodynamics forces and time ». In SMST-2007: Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Tsukuba, Japan, Dec. 2-5, 2007) pp. 55-62. Materials Park, OH : ASM International.

Torra, V, Isalgue, I, Martorell, F, Lovey, F.C, Soul, H et Terriault, Patrick. 2008. « Fatigue life in NiTi for damping applications ». In SMST-2007: Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Tsukuba, Japan, Dec. 2-5, 2007) pp. 159-166. Materials Park, OH : ASM International.
Compte des citations dans Scopus : 1.

2007

Coutu, D, Brailovski, Vladimir, Terriault, Patrick et Fisher, C. 2007. « Experimental validation of the 3D numerical model for an adaptative laminar wing with flexible extrados ». In 18th International Conference on Adaptive Structures and Technologies : ICAST 2007 ; October 3 - 5, 2007, Ottawa, Ontario, Canada (Ottawa, ON, Canada, Oct. 3-5, 2007) pp. 260-269. Redhook, NY, USA : Curran.

Lafortune, Pierre, McCormick, Jason, Desroches, Reginald et Terriault, Patrick. 2007. « Testing of superelastic recentering pre-strained braces for seismic resistant design ». Journal of Earthquake Engineering, vol. 11, nº 3. pp. 383-399.
Compte des citations dans Scopus : 28.

Terriault, Patrick, Torra, V., Fischer, C., Brailovski, Vladimir et Isalgue, A.. 2007. « Superelastic shape memory alloy damper equipped with a passive adaptable pre-straining mechanism ». In 9th Canadian Conference on Earthquake Engineering (CCEE) (Ottawa, ON, Canada, June 26-29, 2007) pp. 1489-1496.

Torra, V., Isalgue, A., Martorell, F., Terriault, Patrick et Lovey, F. C.. 2007. « Built in dampers for family homes via SMA: an ANSYS computation scheme based on mesoscopic and microscopic experimental analyses ». Engineering Structures, vol. 29, nº 8. pp. 1889-1902.
Compte des citations dans Scopus : 59.

2006

Coutu, D., Brailovski, Vladimir, Demers, V. et Terriault, Patrick. 2006. « The design diagram for optimal shape memory alloys linear actuators ». In 10th International Conference on New Actuators (Bremen, Germany, June 14-16, 2006) pp. 924-927. Bremen, Germany : HVG Hanseatische Veranstaltungs-GmbH.

Isalgue, A., Lovey, F.C., Terriault, Patrick, Martorell, F., Torra, R.M. et Torra, V.. 2006. « SMA for dampers in civil engineering ». Materials Transactions, vol. 47, nº 3. pp. 682-690.
Compte des citations dans Scopus : 24.

Martorell, F., Isalgue, A., Torra, V., Lovey, F. C. et Terriault, Patrick. 2006. « SMA a tool for passive damping in civil buildings ». In 4th World Conference on Structural Control and Monitoring (4WCSCM) (San Diego, CA, USA, July 11-13, 2006)

Terriault, Patrick, Viens, F. et Brailovski, Vladimir. 2006. « Non-isothermal finite element modeling of a shape memory alloy actuator using ANSYS ». Computational Materials Science, vol. 36, nº 4. pp. 397-410.
Compte des citations dans Scopus : 50.

Theriault, Philippe, Terriault, Patrick, Brailovski, Vladimir et Gallo, Richard. 2006. « Finite element modeling of a progressively expanding shape memory stent ». Journal of Biomechanics, vol. 39, nº 15. pp. 2837-2844.
Compte des citations dans Scopus : 50.

2005

Baril, Y., Brailovski, Vladimir, Cartier, R. et Terriault, Patrick. 2005. « Feasibility study of a new sternal closure device using tubular braided superelastic nitinol structure ». In Materials and Processes for Medical Devices Conference & Exposition (Boston, MA, USA, Nov. 14-16, 2005) pp. 243-248. Kinsman Road, OH, USA : ASM International.

Gauthier, François-Simon, Vachon, Pierre-Luc, Brailovski, Vladimir et Terriault, Patrick. 2005. « Development of a numerical model for the optimization of damage controlling carbon/epoxy composites containing SMA wires ». In International Workshop on Smart Materials and Structures (Cansmart) (Toronto, ON, Canada, Oct. 12-13, 2006) pp. 261-270. Kingston, Canada : CanSmart Group.

Torra, V., Isalgue, A., Martorell, F., Terriault, Patrick et Lovey, F.. 2005. « Built in dampers for family homes via SMA : an ANSYS computation scheme on the mesoscopic and the microscopic experimental analysis ». In Micromechanics and Microstructure Evolution : Modeling, Simulation and Experiments (Madrid, Spain, Sept. 11-16, 2005)

Torra, V., Isalgue, A., Terriault, Patrick et Lovey, A.. 2005. « From experimental data to quake damping by SMA: a critical experimental analysis and simulation ». In 9th World Seminar on Seismic Isolation, Energy Dissipation and Active Vibration Control of Structures (Kobe, Japan, June 13-16, 2005) Japan : Japan Association for Vibration Technologies (JAVIT).

Wong C., Franklin, Boissonneault, Olivier et Terriault, Patrick. 2005. « Hybrid micro-macro-mechanical constitutive model for shape-memory alloys ». In Smart Structures and Materials 2005: Active Materials: Behavior and Mechanics (San Diego, CA, USA, Mar. 7, 2005) Coll. « Proceedings of SPIE », vol. 5761. pp. 417-428. USA : SPIE.
Compte des citations dans Scopus : 4.

2004

Clement, E., Brailovski, Vladimir, Terriault, Patrick et Trochu, E.. 2004. « Influence of stress concentration on the thermomechanical behavior of NiTi shape memory alloys ». In International Conference on Shape Memory and Superelastic Technologies (SMST) (Pacific Grove, CA, USA, May 5-8, 2003) pp. 463-473. Menlo Park, CA, USA : SMST.

2003

Brailovski, Vladimir et Prokoshkin, Sergei et Terriault, Patrick et Trochu, F., éds. 2003. « Shape memory alloys : fundamentals, modeling and applications ». Montreal, Canada : École de technologie supérieure. 844 p.

Brailovski, Vladimir, Clement, E., Terriault, Patrick et Trochu, F.. 2003. « Influence of stress concentration on the recovery stress generation ». In 10th International Conference on Martensitic Transformations (Espoo, Finland, June 10-14, 2002) pp. 231-234. France : EDP Sciences.
Compte des citations dans Scopus : 4.

Brailovski, Vladimir, Prokoshkin, S., Terriault, Patrick et Trochu, F.. 2003. « Historical summary ». In Shape memory alloys : fundamentals, modeling and applications. pp. 3-8. Montréal, Canada : École de technologie supérieure.

Terriault, Patrick. 2003. « Finite element modeling ». In Shape memory alloys : fundamentals, modeling and applications. pp. 635-684. Montréal, Canada : École de technologie supérieure.

Terriault, Patrick, Settouane, Karim et Brailovski, Vladimir. 2003. « Biaxial testing at different temperatures of cruciform Ti-Ni samples ». In International Conference on Shape Memory and Superelastic Technologies (SMST) (Pacific Grove, CA, USA, May 5-8, 2003) pp. 247-257. Menlo Park, CA, USA : SMST.

Terriault, Patrick, Volkov, A. et Trochu, F.. 2003. « Constitutive relations ». In Shape memory alloys : fundamentals, modeling and applications. pp. 549-634. Montréal, Canada : École de technologie supérieure.

2002

Brailovski, Vladimir, Terriault, Patrick et Prokoshkin, Sergei. 2002. « Influence of the post-deformation annealing heat treatment on the low-cycle fatigue of NiTi shape memory alloys ». Journal of Materials Engineering and Performance, vol. 11, nº 6. pp. 614-621.
Compte des citations dans Scopus : 12.

Terriault, Patrick, Brailovski, Vladimir et Settouane, K.. 2002. « The benefits of using phenomenological material laws in finite element modeling of SMA structures ». Communication lors de la conférence : 3rd World Conference on Structural Control (Como, Italia, Apr., 2002).

Terriault, Patrick et Châtelain, Jean-François. 2002. « Développement de travaux personnalisés en conception assistée par ordinateur ». In Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2000-2001 : Actes (Montréal, QC, Canada, 31 mai 2001) pp. 65-68. École de technologie supérieure.

2001

Terriault, Patrick et Trochu, François. 2001. « The use of computer aided tools for the development of new shape medical applications ». In SMST-2000: proceedings of the International Conference on Shape Memory and Superelastic Technologies, 30 April to 4 May 2000, Asilomar Conference Center, Pacific Grove, California, USA (Pacific Grove, CA, USA, Apr.30-May 4, 2000) pp. 509-516. Fremont, CA, USA : SMST.

2000

Terriault, P.. 2000. « L'utilisation d'outils de conception assistée par ordinateur pour le développement d'applications médicales en alliage à mémoire de forme ». In Actes du deuxième Symposium International de Biomatériaux Avancés (SIBA) (Montréal, QC, Canada, 28 juin-1juil. 2000)

1999

Terriault, P. et Trochu, F.. 1999. « Application of dual kriging to the phenomenological modeling of shape memory alloys ». In Proceedings of the International Symposium on Shape Memory Alloys: Fundamentals, Modeling and Industrial Applications: gateway to the 21st century, August 22-26, 1999, Québec City, Québec, Canada (Québec, QC, Canada, Aug. 22-26, 1999) pp. 143-162. Montreal, QC, Canada : Canadian Institute of Mining, Metallurgy and Petroleum.

Terriault, P. et Trochu, F.. 1999. « Finite element simulation of three dimensional shape memory devices ». In Proceedings of the International Symposium on Shape Memory Alloys: Fundamentals, Modeling and Industrial Applications: gateway to the 21st century, August 22-26, 1999, Québec City, Québec, Canada (Québec, QC, Canada, Aug. 22-26, 1999) pp. 111-126. Montreal, QC, Canada : Canadian Institute of Mining, Metallurgy and Petroleum.

Terriault, Patrick, Trochu, Francois et Brailovski, Vladimir. 1999. « Tensorial generalization of a phenomenological material law for shape memory alloys ». In International Workshop on Nondestructive Testing and Computer Simulations in Science and Engineering (St. Petersburg, Russia, June 08-12, 1998) Coll. « Proceedings of SPIE », vol. 3687. pp. 313-323. SPIE.
Compte des citations dans Scopus : 2.

Volkov, O., Trochu, F., Brailovski, Vladimir, Sacepe, N. et Terriault, Patrick. 1999. « Material law for NITI shape memory alloys based on dual kriging interpolation ». Journal of the Mechanical Behavior of Materials, vol. 10, nº 4. pp. 215-226.

1998

Trochu, F. et Terriault, P.. 1998. « Nonlinear modelling of hysteretic material laws by dual kriging and application ». Computer Methods in Applied Mechanics and Engineering, vol. 151, nº 3-4. pp. 545-558.
Compte des citations dans Scopus : 18.

1997

Terriault, P., Meunier, M. A. et Trochu, F.. 1997. « Application of dual kriging to the construction of a general phenomenological material law for shape memory alloys ». Journal of Intelligent Material Systems and Structures, vol. 8, nº 7. pp. 605-618.
Compte des citations dans Scopus : 9.

1996

Labrecque, C., Braunovic, M., Terriault, P., Trochu, F. et Schetky, M.. 1996. « Experimental and theoretical evaluation of the behavior of a shape memory alloy Belleville washer under different operating conditions ». In Electrical Contacts, Proceedings of the Annual Holm Conference on Electrical Contacts (Chicago, IL, USA, Sept. 16-20, 1996) pp. 195-204. IEEE.
Compte des citations dans Scopus : 12.

Trochu, F., Brailovski, V., Meunier, M. A., Terriault, P. et Qian, Y. Y.. 1996. « Thermomechanical analysis of shape memory devices ». Bio-Medical Materials and Engineering, vol. 6, nº 6. pp. 389-403.
Compte des citations dans Scopus : 2.