La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS
RECHERCHER

Documents publiés en 2017

Monter d'un niveau
Erratum
Exporter en format [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Groupement par Professeur | Affiliation | Type de document | Sans groupement
Aller à Abran, Alain | Aissaoui, Rachid | Akhrif, Ouassima | Al Haddad, Kamal | April, Alain | Arsenault, Richard | Assaf, Gabriel J. | Assi, Rola | Baraër, Michel | Batani, Naïm | Beauregard, Yvan | Ben Ayed, Ismail | Bensoussan, David | Bigras, Pascal | Blanchard, François | Blaquière, Yves | Bocher, Philippe | Bonev, Ilian | Botez, Ruxandra | Boton, Conrad | Boukherroub, Tasseda | Bouzid, Hakim | Brailovski, Vladimir | Bridier, Florent | Brissette, François | Bélanger, Pierre | Carter, Alan | Chaabane, Amin | Chaallal, Omar | Champliaud, Henri | Chandra, Ambrish | Chatelain, Jean-François | Cheriet, Mohamed | Cloutier, Sylvain G. | Constantin, Nicolas | Coulombe, Stéphane | David, Éric | Demarquette, Nicole R. | Demers, Vincent | Desharnais, Jean-Marc | Deslandes, Dominic | Despins, Charles | Desrosiers, Christian | Dessaint, Louis-A. | Doré, Sylvie | Doutres, Olivier | Dubé, Jean-Sébastien | Dubé, Martine | Duchaine, Vincent | Duhaime, François | Dumouchel, Pierre | Duong, Luc | Errico, Fausto | Fihey, Jean-Luc | Forgues, Daniel | Fortin Blanchette, Handy | Francis, Adel | Gagnon, François | Gagnon, Ghyslain | Gardoni, Mickaël | Gargour, Christian | Garnier, François | Gauthier, Guy | Gharbi, Ali | Gherbi, Abdelouahed | Glaus, Mathias | Granger, Éric | Guerrouj, Latifa | Guilbault, Raynald | Guizani, Lotfi | Hagemeister, Nicola | Hallé, Stéphane | Hausler, Robert | Jahazi, Mohammad | Joncas, Simon | Kaddoum, Georges | Kadoch, Michel | Kajl, Stanislaw | Kara, Nadjia | Katsanis, Constantine J. | Kenné, Jean-Pierre | Khaled, Amar | Kouki, Ammar B. | Kpodjedo, Sègla Jean-Luc | Labbé, David | Lamarche, Louis | Lameiras Koerich, Alessandro | Landry, René Jr | Lapalme, James | Laporte, Catherine | Laporte, Claude Y. | Laville, Frédéric | Lemaire, Romain | Lepage, Richard | Lerouge, Sophie | Lina, Jean-Marc | Liu, Zhaoheng | Lombaert, Hervé | Lopez-Herrejon, Roberto E. | Maref, Wahid | Masson, Christian | McGuffin, Michael John | Monette, Frédéric | Monfet, Danielle | Morency, François | Moustapha, Hany | Nabki, Frédéric | Nadeau, Sylvie | Nerguizian, Vahé | Nguyen, Kim Khoa | Ngô, Anh Dung | Nollet, Marie-José | Nuño, Natalia | Ouellet-Plamondon, Claudiane | Ouhimmou, Mustapha | Paquet, Marc | Paquette, Eric | Pedersoli, Marco | Perraton, Daniel | Petit, Yvan | Pham, Tan | Polotski, Vladimir | Poulin, Annie | Ratté, Sylvie | Rivest, Louis | Robert, Jean-Marc | Rousse, Daniel R. | Saad, Maarouf | Sabourin, Robert | Seers, Patrice | Songmene, Victor | Soulaïmani, Azzeddine | Suryn, Witold | Tadj, Chakib | Tahan, Antoine | Talhi, Chamseddine | Terriault, Patrick | Thibeault, Claude | Thomas, Marc | Toews, Matthew | Tremblay, Christine | Ung, Bora | Vaillancourt, Michel | Viens, Martin | Voix, Jérémie | Vu, Viet Hung | Vázquez, Carlos | Wagnac, Éric | Weiss, Julien | Wong, Tony | Woodward, Lyne | Zednik, Ricardo | Zhani, Mohamed Faten | de Guise, Jacques A. | Éthier, Yannic A.
Nombre de documents archivés : 801.

Abran, Alain

Abnane, Ibtissam et Idri, Ali et Abran, Alain. 2017. « Empirical evaluation of fuzzy analogy for software development effort estimation ». In 32nd Annual ACM Symposium on Applied Computing (SAC) (Marrakesh, Morocco, Apr. 04-06, 2017), p. 1302-1304. Association for Computing Machinery.

Brisebois, Ronald et Abran, Alain et Nadembega, Apollinaire. 2017. « A semantic metadata enrichment software ecosystem (SMESE) based on a multi-platform metadata model for digital libraries ». Journal of Software Engineering and Applications, vol. 10, nº 4. p. 370-405.

Genc-Nayebi, Necmiye et Abran, Alain. 2017. « A systematic literature review: Opinion mining studies from mobile app store user reviews ». Journal of Systems and Software, vol. 125. p. 207-219.

Jayakumar, Kamala Ramasubramani et Abran, Alain. 2017. « Estimation models for software functional test effort ». Journal of Software Engineering and Applications, vol. 10, nº 4. p. 338-353.

Koulla Moulla, Donatien et Abran, Alain et Kolyang, . 2017. « An architecture for effort estimation of solutions based on Open Source ». Annals of the Collegium of Economic Analysis, nº 43. p. 69-86.

Lopez-Martin, Cuauhtemoc et Nassif, Ali Bou et Abran, Alain. 2017. « A training process for improving the quality of software projects developed by a practitioner ». Journal of Systems and Software, vol. 131. p. 98-111.

Ouanouki, R. et April, A. et Abran, A. et Gomez, A. et Desharnais, J. M.. 2017. « Toward building RDB to HBase conversion rules ». Journal of Big Data, vol. 4, nº 1.

Staron, Miroslaw et Meding, Wilhelm et Abran, Alain et Bosch, Jan. 2017. « Preface to the special issue on advances in software measurement ». [Éditorial]. Science of Computer Programming, vol. 135. p. 1-3.

Aissaoui, Rachid

Barre, Arnaud et Aissaoui, Rachid et Aminian, Kamiar et Dumas, Raphael. 2017. « Assessment of the lower limb soft tissue artefact at marker-cluster level with a high-density marker set during walking ». Journal of Biomechanics.
(Sous presse)

Chénier, Félix et Aissaoui, Rachid et Gauthier, Cindy et Gagnon, Dany H.. 2017. « Wheelchair pushrim kinetics measurement: A method to cancel inaccuracies due to pushrim weight and wheel camber ». Medical Engineering and Physics, vol. 26, nº 1. p. 67-74.

Gagnon Shaigetz, Vincent et Labbé, David R. et Aissaoui, Rachid. 2017. « Does navigating in a virtual environment while using a haptic wheelchair simulator lead to a more natural propulsion? ». In International Conference on Virtual Rehabilitation (ICVR) (Montreal, QC, Canada, June 19-22, 2017) Piscataway, NJ, USA : IEEE.

Lemieux, Pierre-Olivier et Cresson, Thierry et Aissaoui, Rachid. 2017. « Simultaneous estimation of the path, magnitude and orientation of the femorotibial contact forces using bone geometry constraints: an exploratory numerical study for the stance phase of gait ». Multibody System Dynamics, vol. 41, nº 1. p. 25-45.

Saint-Pierre Côté, S. et Charbonneau, P. et Aissaoui, R. et Nadeau, S. et Duclos, C. et Mezghani, N. et Labbe, D. R.. 2017. « Effect of local modulation of a real-time self-avatar on 3D gait kinematics during natural walking on a treadmill ». In International Conference on Virtual Rehabilitation (ICVR) (Montréal, Qc, Canada, June 19-22, 2017) Piscataway, NJ, USA : IEEE.

Zeighami, A. et Dumas, R. et Kanhonou, M. et Hagemeister, N. et Lavoie, F. et de Guise, J. A. et Aissaoui, R.. 2017. « Tibio-femoral joint contact in healthy and osteoarthritic knees during quasi-static squat: A bi-planar X-ray analysis ». Journal of Biomechanics, vol. 53. p. 178-184.

Akhrif, Ouassima

Chamseddine, Abbas et Akhrif, Ouassima et Charland-Arcand, Guillaume et Gagnon, François et Couillard, Denis. 2017. « Communication relay for multiground units with unmanned aerial vehicle using only signal strength and angle of arrival ». IEEE Transactions on Control Systems Technology, vol. 25, nº 1. p. 286-293.

Kebir, Anouer et Woodward, Lyne et Akhrif, Ouassima. 2017. « Extremum-seeking control with adaptive excitation: application to a photovoltaic system ». IEEE Transactions on Industrial Electronics.
(Sous presse)

Al Haddad, Kamal

Ammar, A. et Kanaan, H. Y. et Moubayed, N. et Hamouda, M. et Rahmani, S. et Ounejjar, Y. et Al-Haddad, K.. 2017. « Grid tie indirect matrix converter operating with unity power factor under double space vector modulation ». In IEEE International Conference on Industrial Technology (ICIT) (Toronto, ON, Canada, Mar. 22-25, 2017), p. 1498-1503. Piscataway, NJ, USA : IEEE.

Arabsalmanabadi, Bita et Javadi, Alireza et Al-Haddad, Kamal. 2017. « Harmonic power flow in unbalanced and polluted radial distribution systems ». In IEEE International Conference on Industrial Technology (ICIT 2017) (Toronto, ON, Canada, Mar. 23-25, 2017), p. 1504-1509. IEEE.

Barros Godoy, Ruben et Buytendorp Bizarro, Douglas et Tessaro de Andrade, Elvey et de Oliveira Soares, Jurandir et Marcondes Justino Ribeiro, Pedro Eugênio et Carniato, Leonardo A. et Kimpara, Marcio L. M. et Pinto, João O. P. et Al-Haddad, Kamal et Canesin, Carlos Alberto. 2017. « Procedure to match the dynamic response of MPPT and droop-controlled microinverters ». IEEE Transactions on Industry Applications, vol. 53, nº 3. p. 2358-2368.

Ben Fadhel, Y. et Ktata, S. et Rahmani, S. et Al-Haddad, K.. 2017. « Used methods to wirelessly powered implantable medical devices ». In 17th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering (STA) (Sousse, Tunisia, Dec. 19-21, 2016), p. 475-480. IEEE.

Dehghanzadeh, Ahmad et Farahani, Gholamreza et Vahedi, Hani et Al-Haddad, Kamal. 2017. « Explicit double-exponential modeling methods for photovoltaic cells ». In IEEE International Conference on Industrial Technology (ICIT) (Toronto, ON, Canada, Mar. 22-25, 2017), p. 423-428. Piscataway, NJ, USA : IEEE.

Dirani, Hind C. et Merkhouf, Arezki et Kedjar, Bachir et Giroux, Anne-Marie et Al-Haddad, Kamal. 2017. « Finite element simulation of hydro generators with rotor inter turn short circuit ». In IEEE International Electric Machines and Drives Conference (IEMDC) (Miami, FL, USA, May 21-24, 2017) Piscataway, NJ, USA : IEEE.

Faraji, Faramarz et Mousavi G, S. M. et Hajirayat, Aliasghar et Birjandi, Ali Akbar Moti et Al-Haddad, Kamal. 2017. « Single-stage single-phase three-level neutral-point-clamped transformerless grid-connected photovoltaic inverters: Topology review ». Renewable and Sustainable Energy Reviews, vol. 80. p. 197-214.

Georges, Semaan W. et Kanaan, Hadi Y. et Hayek, Alferd M. et Al-Haddad, Kamal. 2017. « Modeling, simulation and control design of a PWM three-phase four-wire shunt active power filter for a 60 kW industrial load ». International Journal on Energy Conversion, vol. 5, nº 2. p. 51-59.

Grégoire, Luc-André et Fortin Blanchette, Handy et Bélanger, Jean et Al-Haddad, Kamal. 2017. « A stability and accuracy validation method for multirate digital simulation ». IEEE Transactions on Industrial Informatics, vol. 13, nº 2. p. 512-519.

Hamadi, Abdelhamid et Javadi, Alireza et Ndtoungou, Auguste et Rahmani, Salem et Al-Haddad, Kamal. 2017. « Modeling and contol to enhance a grid on/off operation of a single-phase system ». In IEEE International Conference on Industrial Technology (ICIT) (Toronto, ON, Canada, Mar. 23-25, 2017), p. 1510-1515. IEEE.

Javadi, Alireza et Hamadi, Abdelhamid et Ndtoungou, Auguste et Al-Haddad, Kamal. 2017. « Power quality enhancement of smart households using a multilevel-thseaf with a PR controller ». IEEE Transactions on Smart Grid, vol. 8, nº 1. p. 465-474.

Javadi, Alireza et Woodward, Lyne et Al-Haddad, Kamal. 2017. « Real-time implementation of a three-phase THSeAF Based on VSC and P+R controller to improve power quality of weak distribution systems ». IEEE Transactions on Power Electronics.
(Sous presse)

Kassem, Abdulrahman et Al-Haddad, Kamal et Komljenovic, Dragan. 2017. « Concentrated solar thermal power in Saudi Arabia: Definition and simulation of alternative scenarios ». Renewable and Sustainable Energy Reviews, vol. 80. p. 75-91.

Kumar, Shailendra et Hussain, Ikhlaq et Singh, Bhim et Chandra, Ambrish et Al Haddad, Kamal. 2017. « An adaptive novel control scheme of SPV system integrated to three phase AC distribution system ». IEEE Transactions on Industry Applications.
(Sous presse)

Mendalek, N. et Al-Haddad, K.. 2017. « Photovoltaic system modeling and simulation ». In IEEE International Conference on Industrial Technology (ICIT) (Toronto, ON, Canada, Mar. 22-25, 2017), p. 1522-1527. Piscataway, NJ, USA : IEEE.

Motapon, Souleman Njoya et Lupien-Bedard, Alexandre et Dessaint, Louis-A. et Fortin-Blanchette, Handy et Al-Haddad, Kamal. 2017. « A Generic electrothermal li-ion battery model for rapid evaluation of cell temperature temporal evolution ». IEEE Transactions on Industrial Electronics, vol. 64, nº 2. p. 998-1008.

Mousavi G, S. M. et Faraji, Faramarz et Majazi, Abbas et Al Haddad, Kamal. 2017. « A comprehensive review of flywheel energy storage system technology ». Renewable and Sustainable Energy Reviews, vol. 67. p. 477-490.

Rizvi, Arslan Abbas et Sher, Hadeed Ahmed et Addoweesh, Khaled E. et El-Leathy, Abdelrahman et Al-Ansary, Hany et Al-Haddad, Kamal. 2017. « Simulation of sun tracking system for point focus fresnel collector ». In IEEE 26th International Symposium on Industrial Electronics (ISIE) (Edinburgh, UK, June 19-21, 2017), p. 1023-1028. Piscataway, NJ, USA : IEEE.

Rmili, Lazhar et Hamouda, Mahmoud et Rahmani, Salem et Blanchette, Handy Fortin et Al-Haddad, Kamal. 2017. « PWM-based integral sliding-mode controller for unity input power factor operation of indirect matrix converter ». Journal of Power Electronics, vol. 17, nº 4. p. 1048-1057.

Sharifzadeh, Mohammad et Vahedi, Hani et Cecati, Carlo et Buccella, Concettina et Al-Haddad, Kamal. 2017. « A generalized formulation of SHM-PAM for cascaded H-bridge inverters with non-equal DC sources ». In IEEE International Conference on Industrial Technology (ICIT) (Toronto, ON, Canada, Mar. 22-25, 2017), p. 18-23. Piscataway, NJ, USA : IEEE.

Sher, Hadeed Ahmed et Addoweesh, Khaled E. et Al Haddad, Kamal. 2017. « An efficient and cost-effective hybrid MPPT method for a photovoltaic flyback micro-inverter ». IEEE Transactions on Sustainable Energy.
(Sous presse)

Sher, Hadeed Ahmed et Murtaza, Ali Faisal et Al-Haddad, Kamal. 2017. « A hybrid maximum power point tracking method for photovoltaic applications with reduced offline measurements ». In IEEE International Conference on Industrial Technology (ICIT) (Toronto, ON, Canada, Mar. 22-25, 2017), p. 1482-1485. Piscataway, NJ, USA : IEEE.

Sher, Hadeed Ahmed et Rizvi, Arslan Abbas et Addoweesh, Khaled E. et Al-Haddad, Kamal. 2017. « A single-stage stand-alone photovoltaic energy system with high tracking efficiency ». IEEE Transactions on Sustainable Energy, vol. 8, nº 2. p. 755-762.

Singh, Praveen Kumar et Singh, Bhim et Bist, Vashist et Al-Haddad, Kamal et Chandra, Ambrish. 2017. « BLDC motor drive based on bridgeless landsman PFC converter with single sensor and reduced stress on power devices ». IEEE Transactions on Industry Applications.
(Sous presse)

Sleiman, Mohammad et Kedjar, Bachir et Fortin Blanchette, Handy et Kanaan, Hadi et Al-Haddad, Kamal. 2017. « A simple control method for modular multilevel converters ». In IEEE International Conference on Industrial Technology (ICIT) (Toronto, ON, Canada, Mar. 22-25, 2017), p. 1486-1491. Piscataway, NJ, USA : IEEE.

Troudi, S. et Ktata, S. et Ben Fadhel, Y. et Rahmani, S. et Ghommam, J. et Al-Haddad, K.. 2017. « Analysis and extraction characteristic parameters of ECG signal in real-time for intelligent classification of cardiac arrhythmias ». In 17th International Conference on Sciences and Techniques of Automatic Control and Computer Engineering (STA) (Sousse, Tunisia, Dec. 19-21, 2016), p. 93-97. IEEE.

Vahedi, Hani et Shojaei, Ali Asghar et Dessaint, Louis- A. et Al-Haddad, Kamal. 2017. « Reduced DC link voltage active power filter using modified PUC5 converter ». IEEE Transactions on Power Electronics.
(Sous presse)

Zgheib, Rawad et Kamwa, Innocent et Al-Haddad, Kamal. 2017. « Comparison between isolated and non-isolated DC/DC converters for bidirectional EV chargers ». In IEEE International Conference on Industrial Technology (ICIT) (Toronto, ON, Canada, Mar. 22-25, 2017), p. 515-520. Piscataway, NJ, USA : IEEE.

April, Alain

Amjad Gawanmeh, Ahmad et Alomari, Ahmad et April, Alain. 2017. « Optimizing resource allocation scheduling in cloud computing services ». Journal of Theoretical & Applied Information Technology, vol. 95, nº 1. p. 31-39.

Dupuis, M. et April, A. et Lesage, P. et Forgues, D.. 2017. « Method to enable LCA analysis through each level of development of a BIM model ». In Creative Construction Conference (CCC) (Primosten, Croatia, June 19-22, 2017) Coll. « Procedia Engineering », vol. 196. , p. 857-863.

Kanzki, Beatriz et April, Alain. 2017. « GENOMEVIEWER An interactive genomic somatic mutation visualizer ». In 7th International Conference on Digital Health (DH) (London, United kingdom, July 02-05, 2017) Coll. « ACM International Conference Proceeding Series », vol. Part F128634. , p. 225-226. Association for Computing Machinery.

Laporte, Claude Y. et April, Alain. 2017. « Software quality assurance ». Wiley-IEEE Computer Society Press. 624 p.

Ouanouki, R. et April, A. et Abran, A. et Gomez, A. et Desharnais, J. M.. 2017. « Toward building RDB to HBase conversion rules ». Journal of Big Data, vol. 4, nº 1.

Arsenault, Richard

Arsenault, Richard et Essou, Gilles R. C. et Brissette, François P.. 2017. « Improving Hydrological Model Simulations with Combined Multi-Input and Multimodel Averaging Frameworks ». Journal of Hydrologic Engineering, vol. 22, nº 4.

Bajamgnigni Gbambie, Abdas Salam et Poulin, Annie et Boucher, Marie-Amélie et Arsenault, Richard. 2017. « Added value of alternative information in interpolated precipitation datasets for hydrology ». Journal of Hydrometeorology, vol. 18, nº 1. p. 247-264.

Chen, Jie et Arsenault, Richard et Brissette, François P.. 2017. « An experimental approach to reduce the parametric dimensionality for rainfall–runoff models ». Hydrology Research, vol. 48, nº 1. p. 48-65.

Martel, Jean-Luc et Demeester, Kenjy et Brissette, François et Poulin, Annie et Arsenault, Richard. 2017. « HMETS-A simple and efficient hydrology model for teaching hydrological modelling, flow forecasting and climate change impacts ». International Journal of Engineering Education, vol. 33, nº 4. p. 1307-1316.

Poissant, Dominique et Arsenault, Richard et Brissette, François. 2017. « Impact of parameter set dimensionality and calibration procedures on streamflow prediction at ungauged catchments ». Journal of Hydrology: Regional Studies, vol. 12. p. 220-237.

Assaf, Gabriel J.

Mokhbi, Said et Assaf, Gabriel J. et Yacef, Naima. 2017. « Évolution des propriétés physiques des abrasifs routiers exposés à un cycle hivernal et perspectives de leur réutilisation ». Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 44, nº 4. p. 286-297.

Assi, Rola

Assi, R. et Dliga, M. et Yao, G.. 2017. « Horizontal and vertical seismic acceleration demands in multi-storey buildings ». In Structures Congress 2017: Business, Professional Practice, Education, Research and Disaster Management (Denver, CO, USA, Apr. 06-08, 2017), p. 220-231. Reston, VA, USA : American Society of Civil Engineers.

Baraër, Michel

Mundy, Erin et Gleeson, Tom et Roberts, Mark et Baraer, Michel et McKenzie, Jeffrey M.. 2017. « Thermal imagery of groundwater seeps: Possibilities and limitations ». Groundwater, vol. 55, nº 2. p. 160-170.

Polk, Molly H. et Young, Kenneth R. et Baraer, Michel et Mark, Bryan G. et McKenzie, Jeffrey M. et Bury, Jeffrey et Carey, Mark. 2017. « Exploring hydrologic connections between tropical mountain wetlands and glacier recession in Peru's Cordillera Blanca ». Applied Geography, vol. 78. p. 94-103.

Batani, Naïm

Sattar, Zeeshan et de Carvalho Evangelista, Joao Victor et Kaddoum, Georges et Batani, Naïm. 2017. « Analysis of the cell association for decoupled wireless access in a two tier network ». In IEEE 28th International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) (Montreal, QC, Canada, Oct. 8-13, 2017)
(Sous presse)

Beauregard, Yvan

Beauregard, Yvan et Polotski, Vladimir et Bhuiyan, Nadia et Thomson, Vincent. 2017. « Optimal utilisation level for lean product development in a multitasking context ». International Journal of Production Research, vol. 55, nº 3. p. 795-818.

Singh, Gagandeep et Mougel, Leo et Beauregard, Yvan et Zhao, Yaoyao Fiona. 2017. « Towards optimal engineering multitasking level through stochastic modelling ». International Journal of Operational Research, vol. 28, nº 2. p. 263-278.

Ben Ayed, Ismail

Dolz, Jose et Ben Ayed, Ismail et Desrosiers, Christian. 2017. « Unbiased shape compactness for segmentation ». In Medical Image Computing and Computer-Assisted Intervention : MICCAI 2017 : 20th International Conference, Quebec City, QC, Canada, September 11-13, 2017 : Proceedings : Part I (Quebec City, QC, Canada, Sept. 11-13, 2017) Coll. « Lecture Notes in Computer Science », vol. 10433. , p. 755-763. Springer Verlag.

Dolz, Jose et Desrosiers, Christian et Ben Ayed, Ismail. 2017. « 3D fully convolutional networks for subcortical segmentation in MRI: A large-scale study ». NeuroImage.
(Sous presse)

Gorelick, Lena et Boykov, Yuri et Veksler, Olga et Ben Ayed, Ismail et Delong, Andrew. 2017. « Local submodularization for binary pairwise energies ». IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 39, nº 10. p. 1985-1999.

Hojjat, Seyed-Parsa et Ayed, Ismail et Garvin, Gregory J. et Punithakumar, Kumaradevan. 2017. « Spine labeling in MRI via regularized distribution matching ». International Journal of Computer Assisted Radiology and Surgery.
(Sous presse)

Mathlouthi, Yosra et Mitiche, Amar et Ben Ayed, Ismail. 2017. « Regularised differentiation for image derivatives ». IET Image Processing, vol. 11, nº 5. p. 310-316.

Bensoussan, David

Benkhellat, Lyes et Bensoussan, David. 2017. « Geogebra as a tool of design of ultrafast and robust controller ». In IEEE International Conference on Industrial Technology (ICIT) (Toronto, ON, Canada, Mar. 22-25, 2017), p. 815-818. Piscataway, NJ, USA : IEEE.

Bigras, Pascal

Ren, Qun et Bigras, Pascal. 2017. « A Highly accurate model-free motion control system with a mamdani fuzzy feedback controller combined with a TSK fuzzy feed-forward controller ». Journal of Intelligent & Robotic Systems, vol. 86, nº 3/4. p. 367-379.

Blanchard, François

Hörning, Marcel et Blanchard, François et Isomura, Akihiro et Yoshikawa, Kenichi. 2017. « Dynamics of spatiotemporal line defects and chaos control in complex excitable systems ». Scientific Reports, vol. 7, nº 1.

Blaquière, Yves

Berrima, Safa et Blaquière, Yves et Savaria, Yvon. 2017. « A multi-measurements RO-TDC implemented in a Xilinx field programmable gate array ». In 2017 IEEE International Symposium on Circuits and Systems (ISCAS) (Baltimore, MD, USA, May 28-31, 2017) Piscataway, NJ, USA : IEEE.

Berrima, Safa et Blaquière, Yves et Savaria, Yvon. 2017. « Sub-ps resolution programmable delays implemented in a Xilinx FPGA ». In IEEE 60th International Midwest Symposium on Circuits and Systems (MWSCAS) (Boston, MA, USA, Aug. 06-09, 2017), p. 918-921. Piscataway, NJ, USA : IEEE.

Bocher, Philippe

Anderson, M. et Thielin, A. L. et Bridier, F. et Bocher, P. et Savoie, J.. 2017. « δ Phase precipitation in Inconel 718 and associated mechanical properties ». Materials Science and Engineering A, vol. 679. p. 48-55.

Chen, Jianqiang et Demers, Vincent et Cadotte, Eve-Line et Turner, Daniel et Bocher, Philippe. 2017. « Structural performance of inconel 625 superalloy brazed joints ». Journal of Materials Engineering and Performance, vol. 26, nº 2. p. 547-553.

Comot, P. et Bocher, P. et Belanger, P.. 2017. « Ultrasonic guided wave inspection of Inconel 625 brazed lap joints: Simulation and experimentation ». NDT and E International, vol. 91. p. 71-78.

Delbergue, D. et Texier, D. et Lévesque, M. et Bocher, P.. 2017. « Comparison of two X-Ray residual stress measurement methods: Sin2 ψ and Cos α, through the determination of a martensitic steel X-Ray elastic constant ». In International Conference on Residual Stresses 2016 ICRS-10) Coll. « Materials Research Proceedings ». , p. 55-60. Millersville : Materials Research Forum LLC.

Foroozmehr, Fayaz et Verreman, Yves et Chen, Jianqiang et Thibault, Denis et Bocher, Philippe. 2017. « Effect of inclusions on fracture behavior of cast and wrought 13% Cr-4% Ni martensitic stainless steels ». Engineering Fracture Mechanics, vol. 175. p. 262-278.

Javadi, Hamid et Jomaa, Walid et Texier, Damien et Brochu, Myriam et Bocher, Philippe. 2017. « Surface roughness effects on the fatigue behavior of as-machined inconel 718 ». In 8th International Conference on Materials Structure and Micromechanics of Fracture (MSMF 8) (Brno, Czech republic, July 27-29, 2016) Coll. « Solid State Phenomena », vol. 258. , p. 306-309. Trans Tech Publications Ltd.

Jomaa, Walid et Lévesque, Julie et Bocher, Philippe et Divialle, Arnaud et Gakwaya, Augustin. 2017. « Optimization study of dry peripheral milling process for improving aeronautical part integrity using Grey relational analysis ». International Journal of Advanced Manufacturing Technology, vol. 91, nº 1-4. p. 931-942.

Jomaa, Walid et Mechri, Oussama et Levesque, Julie et Songmene, Victor et Bocher, Philippe et Gakwaya, Augustin. 2017. « Finite element simulation and analysis of serrated chip formation during highspeed machining of AA7075T651 alloy ». Journal of Manufacturing Processes, vol. 26. p. 446-458.

Jomaa, Walid et Songmene, Victor et Bocher, Philippe. 2017. « Predictive analytical modeling of cutting forces generated by high-speed machining of ductile and hard metals ». Machining Science and Technology, vol. 21, nº 3. p. 335-361.

Jomaa, Walid et Songmene, Victor et Bocher, Philippe et Gakwaya, Augustin. 2017. « Fea-based comparative investigation on high speed machining of aluminum alloys aa6061-t6 and aa7075-t651 ». In 9th International Congress on Precision Machining, (ICPM 2017) (Athens, Greece, Sept. 06-09, 2017) Coll. « Solid State Phenomena », vol. 261. , p. 347-353.

McMeekin, Kevin et Sirois, Frédéric et Tousignant, Maxime et Bocher, Philippe. 2017. « Improving the accuracy of time-harmonic FE simulations in induction heating applications Towards better ferromagnetic material models ». COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 36, nº 2. p. 526-534.

Meimandi, Shilan et Vanderesse, Nicolas et Thibault, Denis et Bocher, Philippe et Viens, Martin. 2017. « Macro-defects characterization in cast CA-6NM martensitic stainless steel ». Materials Characterization, vol. 124. p. 31-39.

Siredey-Schwaller, N. et Hamel-Akre, J. et Peltier, L. et Hazotte, A. et Bocher, P.. 2017. « Solidification sequence of Ni-Si-Cr ~3wt% B brazing alloys ». Welding in the World, vol. 61, nº 6. p. 1253-1265.

Stinville, J. C. et Echlin, M. P. et Callahan, P. G. et Miller, V. M. et Texier, D. et Bridier, F. et Bocher, P. et Pollock, T. M.. 2017. « Measurement of strain localization resulting from monotonic and cyclic loading at 650C in nickel base superalloys ». Experimental Mechanics.
(Sous presse)

Sun, Binhan et Vanderesse, Nicolas et Fazeli, Fateh et Scott, Colin et Chen, Jianqiang et Bocher, Philippe et Jahazi, Mohammad et Yue, Stephen. 2017. « Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel ». Scripta Materialia, vol. 133. p. 9-13.

Touazine, Heithem et Akab, Jordan et Jahazi, Mohammad et Tahan, Antoine et Jomaa, Walid et Bocher, Philippe. 2017. « Modeling of the microstructure alteration induced by hard turning of Inconel 718 ». International Journal of Advanced Manufacturing Technology.
(Sous presse)

Touazine, Heithem et Jahazi, Mohammad et Bocher, Philippe. 2017. « Accurate determination of damaged subsurface layers in machined Inconel 718 ». International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12. p. 3419-3427.

Tu, Fubin et Delbergue, Dorian et Miao, Hongyan et Klotz, Thierry et Brochu, Myriam et Bocher, Philippe et Levesque, Martin. 2017. « A sequential DEM-FEM coupling method for shot peening simulation ». Surface and Coatings Technology, vol. 319. p. 200-212.

Bonev, Ilian

Gharaaty, Sepehr et Tingting, Shu et Wen-Fang, Xie et Joubair, Ahmed et Bonev, Ilian A.. 2017. « Accuracy enhancement of industrial robots by on-line pose correction ». In 2nd Asia-Pacific Conference on Intelligent Robot Systems (ACIRS) (Wuhan, China, June 16-18, 2017), p. 214-220. Piscataway, NJ, USA : IEEE.

Botez, Ruxandra

Aubeelack, Hema et Botez, Ruxandra Mihaela. 2017. « Accuracy of two nonlinear finite wing models in the aerodynamic prediction of wing sweep effects ». In 35th AIAA Applied Aerodynamics Conference (Denver, CO, USA, June 05-09, 2017) Coll. « AIAA Paper », vol. AIAA 2017-3259. AIAA.

Bardela, Paul Alexandre et Botez, Ruxandra Mihaela. 2017. « Identification and validation of the Cessna citation X engine component level modeling with flight tests ». In AIAA Modeling and Simulation Technologies Conference (Grapevine, TX, USA, Jan. 09-13, 2017) Coll. « AIAA paper », vol. AIAA 2017-1492. American Institute of Aeronautics and Astronautics.

Bardella, Paul Alexandre A. et Botez, Ruxandra Mihaela et Pageaud, Pierre. 2017. « Cessna citation X engine model experimental validation ». In IASTED International Conference on Modelling, Identification and Control (MIC) (Innsbruck, Austria, Feb. 20-21, 2017), p. 81-88. Acta press.

Botez, Ruxandra M. et Koreanschi, Andreea et Sugar Gabor, Oliviu et Mebarki, Yussef et Mamou, Mahmoud et Tondji, Yvan et Amoroso, Francesco et Pecora, Rosario et Lecce, Leonardo et Amendola, Gianluca et Dimino, Ignazio et Concilio, Antonio. 2017. « Numerical and experimental testing of a morphing upper surface wing equipped with conventional and morphing ailerons ». In 55th AIAA Aerospace Sciences Meeting (Grapevine, TX, USA, Jan. 09-13, 2017) Coll. « AIAA paper », vol. AIAA 2017-1425. American Institute of Aeronautics and Astronautics.

Boughari, Yamina et Botez, Ruxandra Mihaela et Ghazi, Georges et Theel, Florian. 2017. « Flight control clearance of the Cessna Citation X using evolutionary algorithms ». Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 231, nº 3. p. 510-532.

Dancila, Bogdan D. et Botez, Ruxandra M.. 2017. « Geographical area selection and construction of a corresponding routing grid used for in-flight management system flight trajectory optimization ». Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 231, nº 5. p. 809-822.

Ghazi, Georges et Bosne, Matthieu et Sammartano, Quentin et Botez, Ruxandra Mihaela. 2017. « Cessna citation X stall characteristics identification from flight data using neural networks ». In AIAA Atmospheric Flight Mechanics Conference (Grapevine, TX, USA, Jan. 09-13, 2017) Coll. « AIAA paper », vol. AIAA 2017-0937. American Institute of Aeronautics and Astronautics.

Kammegne, Michel Joël Tchatchueng et Botez, Ruxandra Mihaela et Grigorie, Lucian Teodor et Mamou, Mahmoud et Mébarki, Youssef. 2017. « Proportional fuzzy feed-forward architecture control validation by wind tunnel tests of a morphing wing ». Chinese Journal of Aeronautics, vol. 30, nº 2. p. 561-576.

Kammegne, Michel Joel Tchatchueng et Tondji, Yvan et Botez, Ruxandra Mihaela et Grigorie, Lucian Teodor et Mamou, Mahmoud et Mébarki, Youssef. 2017. « New control methodology for a morphing wing demonstrator ». Proceedings of the Institution of Mechanical Engineers, Part G : Journal of Aerospace Engineering.
(Sous presse)

Koreanschi, Andreea et Gabor, Oliviu Sugar et Acotto, Joran et Brianchon, Guillaume et Portier, Gregoire et Botez, Ruxandra Mihaela et Mamou, Mahmoud et Mebarki, Youssef. 2017. « Optimization and design of an aircraft's morphing wing-tip demonstrator for drag reduction at low speeds, Part II - Experimental validation using Infra-Red transition measurement from Wind Tunnel tests ». Chinese Journal of Aeronautics, vol. 30, nº 1. p. 164-174.

Koreanschi, Andreea et Sugar Gabor, Oliviu et Acotto, Joran et Brianchon, Guillaume et Portier, Gregoire et Botez, Ruxandra Mihaela et Mamou, Mahmoud et Mebarki, Youssef. 2017. « Optimization and design of an aircraft’s morphing wing-tip demonstrator for drag reduction at low speed, Part I – Aerodynamic optimization using genetic, bee colony and gradient descent algorithms ». Chinese Journal of Aeronautics, vol. 30, nº 1. p. 149-163.

Kuitche, Maxime et Segui, Marine et Botez, Ruxandra Mihaela et Sugar Gabor, Oliviu et Ghazi, Georges. 2017. « New methodology for flight dynamics modelling of the UAS-S4 ehécatl towards its aerodynamics estimation modelling ». In AIAA Modeling and Simulation Technologies Conference (Grapevine, TX, USA, Jan. 09-13, 2017) Coll. « AIAA paper », vol. AIAA 2017-0807. American Institute of Aeronautics and Astronautics.

Machetto, Antoine et Communier, David et Botez, Ruxandra et Carranza Moyao, Oscar et Wong, Tony. 5 Avril 2017. « Automating Wing Angle Changes inside the LARCASE Price – Païdoussis Wind Tunnel ». [Research Paper Introduction]. Substance ÉTS.

Machetto, Antoine et Communier, David et Botez, Ruxandra et Carranza Moyao, Oscar et Wong, Tony. 5 Avril 2017. « Automatisation du changement d’angle d’une aile dans la soufflerie Price – Païdoussis du LARCASE ». [Research Paper Introduction]. Substance ÉTS.

Murrieta Mendoza, Alejandro et Mugnier, Paul et Botez, Ruxandra M.. 2017. « Vertical and horizontal flight reference trajectory optimization for a commercial aircraft ». In AIAA Guidance, Navigation, and Control Conference (Grapevine, TX, USA, Jan. 09-13, 2017) Coll. « AIAA paper », vol. AIAA 2017-1241. American Institute of Aeronautics and Astronautics.

Murrieta Mendoza, Alejandro et Ruiz, Hugo et Botez, Ruxandra Mihaela. 2017. « Vertical reference flight trajectory optimization with the particle swarm optimisation ». In IASTED Internatinal Conference on Modelling, Identification and Control (MIC) (Innsbruck, Austria, Feb. 20-21, 2017), p. 138-146. Acta press.

Murrieta-Mendoza, Alejandro et Beuze, Bruce et Ternisien, Laurane et Botez, Ruxandra Mihaela. 22 Mars 2017. « L’algorithme de recherche en faisceau pour optimiser les trajectoires ». [Research Paper Introduction]. Substance ÉTS.

Murrieta-Mendoza, Alejandro et Beuze, Bruce et Ternisien, Laurane et Botez, Ruxandra Mihaela. 2017. « New reference trajectory optimization algorithm for a flight management system inspired in beam search ». Chinese Journal of Aeronautics, vol. 30, nº 4. p. 1459-1472.

Murrieta-Mendoza, Alejandro et Beuze, Bruce et Ternisien, Laurane et Botez, Ruxandra Mihaela. 22 Mars 2017. « The Beam Search Algorithm to Optimize Vertical Reference Trajectories ». [Research Paper Introduction]. Substance ÉTS.

Murrieta-Mendoza, Alejandro et Ruiz, Hugo et Kessaci, Sonya et Botez, Ruxandra Mihaela. 2017. « 3D reference trajectory optimization using particle swarm optimization ». In 17th AIAA Aviation Technology, Integration, and Operations Conference (Denver, CO, USA, June 05-09, 2017) Coll. « AIAA Paper », vol. AIAA 2017-3435. AIAA.

Segui, Marine et Botez, Ruxandra Mihaela et Kuitche, Maxime et Sugar Gabor, Oliviu. 2017. « Aerodynamic coefficients determination of hydra technologies UAS-S4 wing from geometrical data ». In AIAA Modeling and Simulation Technologies Conference (Grapevine, TX, USA, Jan. 09-13, 2017) Coll. « AIAA paper », vol. AIAA 2017-0579. American Institute of Aeronautics and Astronautics.

Segui, Marine et Sugar Gabor, Oliviu et Koreanschi, Andreea et Botez, Ruxandra Mihaela. 2017. « Morphing wing application on hydra technologies UAS-S4 ». In IASTED International Conference on Modelling, Identification and Control (MIC) (Innsbruck, Austria, Feb. 20-21, 2017), p. 151-157. Acta press.

Zaag, Mahdi et Botez, Ruxandra M.. 2017. « Cessna citation X engine model identification and validation in the cruise regime from flight tests based on neural networks combined with extended great deluge algorithm ». In AIAA Modeling and Simulation Technologies Conference (Grapevine, TX, USA, Jan. 09-13, 2017) Coll. « AIAA paper », vol. AIAA 2017-1941. American Institute of Aeronautics and Astronautics.

Boton, Conrad

Bolshakova, Veronika et Halin, Gilles et Humbert, Pascal et Boton, Conrad. 2017. « Digital synchronous collaboration workspace and 3D interactions for an AEC project. Decision-making scenario evaluation ». In Cooperative Design, Visualization, and Engineering : 14th International Conference, CDVE 2017, Mallorca, Spain, September 17-20, 2017, Proceedings (Mallorca, Spain, Sept. 17-20, 2017) Coll. « Lecture Notes in Computer Science », vol. 10451. , p. 168-176. Springer International Publishing.

Boton, Conrad et Forgues, Daniel. 2017. « The need for a new systemic approach to study collaboration in the construction industry ». In Fifth Creative Construction Conference (CCC) (Primosten, Croatia, June 19-22, 2017) Coll. « Procedia Engineering », vol. 196. , p. 1043-1050. Elsevier.

Boton, Conrad et Forgues, Daniel et Halin, Gilles. 2017. « Les enjeux liés à l’intégration de l’approche BIM de modélisation des données du bâtiment à l’enseignement universitaire : cas d’une école d’ingénierie ». Revue Internationale des Technologies en Pédagogie Universitaire, vol. 14, nº 2. p. 5-23.

Boukherroub, Tasseda

Boukherroub, Tasseda et Bouchery, Yann et Corbett, Charles J. et Fransoo, Jan C. et Tan, Tarkan. 2017. « Carbon footprinting in supply chains ». In Sustainable Supply Chains: A Research-Based Textbook on Operations and Strategy. p. 43-64. Springer International Publishing.

Boukherroub, Tasseda et LeBel, Luc et Lemieux, Sébastien. 2017. « An integrated wood pellet supply chain development: Selecting among feedstock sources and a range of operating scales ». Applied Energy, vol. 198. p. 385-400.

Boukherroub, Tasseda et LeBel, Luc et Ruiz, Angel. 2017. « A framework for sustainable forest resource allocation: A Canadian case study ». Omega, vol. 66, Part B. p. 224-235.

Bouzid, Hakim

Daoud, M. et Chatelain, J. F. et Bouzid, A.. 2017. « Effect of rake angle-based Johnson-Cook material constants on the prediction of residual stresses and temperatures induced in Al2024-T3 machining ». International Journal of Mechanical Sciences, vol. 122. p. 392-404.

Demers, Sébastien et Nadeau, Sylvie et Bouzid, Abdel-Hakim. 2017. « Analytical evaluation of stresses and displacements of an intervertebral disc ». Journal of Biomechanical Science and Engineering, vol. 12, nº 3.

Kazeminia, Mehdi et Bouzid, Hakim. 2017. « Evaluation of leakage through graphite-based compression packing rings ». Journal of Pressure Vessel Technology, vol. 139, nº 1.

Wyckaert, Pauline et Nadeau, Sylvie et Bouzid, Hakim. 2017. « Analysis of risks of pressure vessels ». In Gesellschaft für Arbeitswissenschaft : Soziotechnische Gestaltung des digitalen Wandels – kreativ, innovativ, sinnhaft (Zurich, Suisse, Fev. 15-17, 2017) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 63. GFA Press.

Zhu, Linbo et Bouzid, Abdel-Hakim et Hong, Jun. 2017. « Numerical and experimental study of elastic interaction in bolted flange joints ». Journal of Pressure Vessel Technology, vol. 139, nº 2.

Brailovski, Vladimir

Brailovski, Vladimir et Terriault, Patrick et Simoneau, Charles et Dumas, Mathieu et Jetté, Bruno. 2017. « Development of a biomimetic metallic femoral stem: Methodological approach ». In International conference on processing and manufacturing of advanced materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) Coll. « Materials Science Forum », vol. 879. , p. 1788-1793. Trans Tech Publications.

Brummund, Martin et Brailovski, Vladimir et Petit, Yvan et Facchinello, Yann et Mac-Thiong, Jean-Marc. 2017. « Impact of anchor type on porcine lumbar biomechanics: Finite element modelling and in-vitro validation ». Clinical Biomechanics, vol. 43. p. 86-94.

Dumas, Mathieu et Terriault, Patrick et Brailovski, Vladimir. 2017. « Modelling and characterization of a porosity graded lattice structure for additively manufactured biomaterials ». Materials and Design, vol. 121. p. 383-392.

Ijaz, M. F. et Dubinskiy, S. et Zhukova, Y. et Korobkova, A. et Pustov, Y. et Brailovski, V. et Prokoshkin, S.. 2017. « Novel electrochemical test bench for evaluating the functional fatigue life of biomedical alloys ». The Journal of The Minerals, Metals & Materials Society, vol. 69, nº 8. p. 1334-1339.

Konopatsky, A. S. et Dubinskiy, S. M. et Zhukova, Yu S. et Sheremetyev, V. et Brailovski, V. et Prokoshkin, S. D. et Filonov, M. R.. 2017. « Ternary Ti-Zr-Nb and quaternary Ti-Zr-Nb-Ta shape memory alloys for biomedical applications: Structural features and cyclic mechanical properties ». Materials Science and Engineering A, vol. 702. p. 301-311.

Konopatsky, A. et Brailovski, V. et Filonov, M. et Dubinskiy, S. et Zhukova, Y. et Korotitskiy, A. et Prokoshkin, S.. 2017. « Manufacturing and characterization of novel Ti-Zr-Based shape memory alloys ». [Article de conférence]. Materials Today: Proceedings, vol. 4, nº 3. p. 4856-4860.

Kreitcberg, Alena et Brailovski, Vladimir et Turenne, Sylvain. 2017. « Effect of heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Inconel 625 alloy processed by laser powder bed fusion ». Materials Science and Engineering A, vol. 689. p. 1-10.

Kreitcberg, Alena et Brailovski, Vladimir et Turenne, Sylvain. 2017. « Elevated temperature mechanical behavior of IN625 alloy processed by laser powder-bed fusion ». Materials Science and Engineering A, vol. 700. p. 540-553.

Kreitcberg, Alena et Brailovski, Vladimir et Turenne, Sylvain et Chanal, Cyrille et Urlea, Victor. 2017. « Influence of thermo- and HIP treatments on the microstructure and mechanical properties of IN625 alloy parts produced by selective laser melting : A comparative study ». In International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) Coll. « Materials Science Forum », vol. 879. , p. 1008-1013. Trans Tech Publications.

Mostafa, Ahmad et Rubio, Ignacio Picazo et Brailovski, Vladimir et Jahazi, Mohammad et Medraj, Mamoun. 2017. « Structure, texture and phases in 3D printed IN718 alloy subjected to homogenization and HIP treatments ». Metals, vol. 7, nº 6.

Prokoshkin, S. et Dubinskiy, S. et Brailovski, V. et Korotitskiy, A. et Konopatsky, A. et Sheremetyev, V. et Blinova, E.. 2017. « Nanostructures and stress-induced phase transformation mechanism in titanium nickelide annealed after moderate cold deformation ». Materials Letters, vol. 192. p. 111-114.

Prokoshkin, Sergey et Brailovski, Vladimir et Dubinskiy, Sergey et Inaekyan, Karine et Kreitcberg, Alena. 2017. « Peculiarities of nanostructure formation upon post-deformation annealing of Ti-Ni shape memory alloys ». [Article de conférence]. Materials Today: Proceedings, vol. 4, nº 3. p. 4819-4824.

Simoneau, Charles et Terriault, Patrick et Jetté, Bruno et Dumas, Mathieu et Brailovski, Vladimir. 2017. « Development of a porous metallic femoral stem: Design, manufacturing, simulation and mechanical testing ». Materials and Design, vol. 114. p. 546-556.

Terriault, Patrick et Brailovski, Vladimir. 2017. « Influence of boundary conditions on the simulation of a diamond-type lattice structure: A preliminary study ». Advances in Materials Science and Engineering, vol. 2017.

Urlea, V. et Brailovski, V.. 2017. « Electropolishing and electropolishing-related allowances for IN625 alloy components fabricated by laser powder-bed fusion ». International Journal of Advanced Manufacturing Technology.
(Sous presse)

Urlea, V. et Brailovski, V.. 2017. « Electropolishing and electropolishing-related allowances for powder bed selectively laser-melted Ti-6Al-4V alloy components ». Journal of Materials Processing Technology, vol. 242. p. 1-11.

Bridier, Florent

Anderson, M. et Thielin, A. L. et Bridier, F. et Bocher, P. et Savoie, J.. 2017. « δ Phase precipitation in Inconel 718 and associated mechanical properties ». Materials Science and Engineering A, vol. 679. p. 48-55.

Brissette, François

Arsenault, Richard et Essou, Gilles R. C. et Brissette, François P.. 2017. « Improving Hydrological Model Simulations with Combined Multi-Input and Multimodel Averaging Frameworks ». Journal of Hydrologic Engineering, vol. 22, nº 4.

Chen, Jie et Arsenault, Richard et Brissette, François P.. 2017. « An experimental approach to reduce the parametric dimensionality for rainfall–runoff models ». Hydrology Research, vol. 48, nº 1. p. 48-65.

Chen, Jie et Brissette, Francois P.. 2017. « Hydrological modelling using proxies for gauged precipitation and temperature ». Hydrological Processes, vol. 31, nº 22. p. 3881-3897.

Chen, Jie et Brissette, François P. et Liu, Pan et Xia, Jun. 2017. « Using raw regional climate model outputs for quantifying climate change impacts on hydrology ». Hydrological Processes, vol. 31, nº 24. 4398–4413.

Chen, Jie et Brissette, François P. et Lucas-Picher, Philippe et Caya, Daniel. 2017. « Impacts of weighting climate models for hydro-meteorological climate change studies ». Journal of Hydrology, vol. 549. p. 534-546.

Essou, Gilles R. C. et Brissette, François et Lucas-Picher, Philippe. 2017. « Impacts of combining reanalyses and weather station data on the accuracy of discharge modelling ». Journal of Hydrology, vol. 545. p. 120-131.

Essou, Gilles R. C. et Brissette, François et Lucas-Picher, Philippe. 2017. « The use of reanalyses and gridded observations as weather input data for a hydrological model: Comparison of performances of simulated river flows based on the density of weather stations ». Journal of Hydrometeorology, vol. 18, nº 2. p. 497-513.

Martel, Jean-Luc et Demeester, Kenjy et Brissette, François et Poulin, Annie et Arsenault, Richard. 2017. « HMETS-A simple and efficient hydrology model for teaching hydrological modelling, flow forecasting and climate change impacts ». International Journal of Engineering Education, vol. 33, nº 4. p. 1307-1316.

Poissant, Dominique et Arsenault, Richard et Brissette, François. 2017. « Impact of parameter set dimensionality and calibration procedures on streamflow prediction at ungauged catchments ». Journal of Hydrology: Regional Studies, vol. 12. p. 220-237.

Bélanger, Pierre

Abid, A. et Pereira, D. et Fernandes, J. C. et Belanger, P.. 2017. « Sensitivity study of ultrasonic guided waves to cortical bone mechanical properties with axial and circumferential propagation ». Acta Acustica united with Acustica, vol. 103, nº 3. p. 421-429.

Boivin, Guillaume et Bélanger, Pierre et Zednik, Ricardo J.. 2017. « Torsional piezoelectric strain in monocrystalline paratellurite ». In International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) Coll. « Materials Science Forum », vol. 879. , p. 637-641. Trans Tech Publications.

Comot, P. et Bocher, P. et Belanger, P.. 2017. « Ultrasonic guided wave inspection of Inconel 625 brazed lap joints: Simulation and experimentation ». NDT and E International, vol. 91. p. 71-78.

de Castilla, Hector et Bélanger, Pierre et Zednik, Ricardo J.. 2017. « Dynamic piezoelectric behavior of lithium niobate at high temperature ». In International Conference oN Processing and Manufacturing Of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) Coll. « Materials Science Forum », vol. 879. , p. 408-412. Trans Tech Publications.

Dupont-Marillia, Frederic et Jahazi, Mohammad et Lafreniere, Serge et Bélanger, Pierre. 2017. « Influence of local mechanical properties of high strength steel from large size forged ingot on ultrasonic wave velocities ». In 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation (Atlanta, GA, USA, July 17-22, 2016) Coll. « AIP Conference Proceedings », vol. 1806. USA : American Institute of Physics.

Mansur Rodrigues Filho, Jorge Franklin et Tremblay, Nicolas et Gláucio, Soares da Fonseca et Belanger, Pierre. 2017. « The feasibility of structural health monitoring using the fundamental shear horizontal guided wave in a thin aluminum plate ». Materials, vol. 10, nº 5.

Pereira, Daniel et Haiat, Guillaume et Fernandes, Julio et Belanger, Pierre. 2017. « Simulation of acoustic guided wave propagation in cortical bone using a semi-analytical finite element method ». Journal of the Acoustical Society of America, vol. 141, nº 4. p. 2538-2547.

Thakare, Dhawal R. et Abid, Alexandre et Pereira, Daniel et Fernandes, Julio et Belanger, Pierre et Rajagopal, Prabhu. 2017. « Semi-analytical finite-element modeling approach for guided wave assessment of mechanical degradation in bones ». International Biomechanics, vol. 4, nº 1. p. 17-27.

Travaglini, Christophe et Bescond, Christophe et Viens, Martin et Belanger, Pierre. 2017. « Feasibility of high frequency guided wave crack monitoring ». Structural Health Monitoring, vol. 16, nº 4.

Carter, Alan

Badeli, Saeed et Saliani, Saeed et Carter, Alan. 2 Février 2017. « Effect of Short Aramid Fibers on Asphalt Performance ». [Research Paper Introduction]. Substance ÉTS.

Badeli, Saeed et Saliani, Saeed et Carter, Alan. 2 Février 2017. « Effet des fibres courtes d’aramide sur la performance de l’asphalte ». [Research Paper Introduction]. Substance ÉTS.

Gandi, Apparao et Carter, Alan et Singh, Dharamveer. 2017. « Linear viscoelastic behavior of cold recycled asphalt materials with various percentages of recycled asphalt ». In 96th Annual MeetingTransportation Research Board (Washington, DC, USA, Jan. 08-12, 2017) Transportation Research Board.

Chaabane, Amin

Garcia-Alvarado, Marthy et Paquet, Marc et Chaabane, Amin et Amodeo, Lionel. 2017. « Inventory management under joint product recovery and cap-and-trade constraints ». Journal of Cleaner Production, vol. 167. p. 1499-1517.

Chaallal, Omar

Bourget, Simon et El-Saikaly, Georges et Chaallal, Omar. 2017. « Behavior of reinforced concrete T-Beams strengthened in shear using closed carbon fiber-reinforced polymer stirrups made of laminates and ropes ». ACI Structural Journal, vol. 114, nº 5. p. 1087-1098.

Godat, Ahmed et Ceroni, Francesca et Chaallal, Omar et Pecce, Marisa. 2017. « Evaluation of FRP-to-concrete anchored joints designed for FRP shear-strengthened RC T-beams ». Composite Structures, vol. 176. p. 481-495.

Guizani, Lotfi et Chaallal, Omar et Mousavi, Seyed Sina. 2017. « Local bond stress-slip model for reinforced concrete joints and anchorages with moderate confinement ». Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 44, nº 3. p. 201-211.

Champliaud, Henri

Curtat, Jean-Loup et Lanteigne, Jacques et Champliaud, Henri et Liu, Zhaoheng et Lévesque, Jean-Benoît. 2017. « Influence of hammer peening on fatigue life of E309L steel used for 13%Cr-4%Ni blade runner repairs ». International Journal of Fatigue, vol. 100. p. 68-77.

Gendron, Mathieu et Hazel, Bruce et Boudreault, Eric et Champliaud, Henri et Pham, Xuan-Tan. 2017. « Modeling circular inductors coupled to a semi-infinite magnetic medium considering the proximity effect ». Journal of Electromagnetic Waves and Applications.
(Sous presse)

Ghafarizadeh, Seyedbehzad et Tahvilian, Amir Masoud et Chatelain, Jean-François et Liu, Zhaoheng et Champliaud, Henri et Lebrun, Gilbert. 2017. « Numerical simulation of ball-end milling with SPH method ». International Journal of Advanced Manufacturing Technology, vol. 88, nº 1. p. 401-408.

Luk-Cyr, Jacques et El-Bawab, Rayan et Champliaud, Henri et Lanteigne, Jacques et Vadean, Aurelian. 2017. « Sequential approximate optimization of industrial hammer peening using finite element simulations ». Structural and Multidisciplinary Optimization, vol. 55, nº 3. p. 767-778.

Luk-Cyr, Jacques et Paquet, Daniel et Lanteigne, Jacques et Champliaud, Henri et Vadean, Aurelian. 2017. « A unified plasticity methodology for rate- and temperature-sensitive alloys exhibiting a non-linear kinematic hardening behavior ». Acta Mechanica Solida Sinica, vol. 12, nº 2. p. 726-737.

Sarafan, S. et Wanjara, P. et Gholipour, J. et Champliaud, H. et Mathieu, L.. 2017. « Mechanical properties of electron beam welds in heavy-section UNS S41500 martensitic stainless steel ». International Journal of Advanced Manufacturing Technology, vol. 91, nº 9/12. p. 4141-4150.

Sarafan, Sheida et Wanjara, Priti et Gholipour, Javad et Champliaud, Henri et Mathieu, Louis. 2017. « Mehanical properties of electron beam welded joints in thick gage CA6NM stainless steel ». Journal of Materials Engineering and Performance, vol. 26, nº 10. p. 4768-4780.

Chandra, Ambrish

Kumar, Shailendra et Hussain, Ikhlaq et Singh, Bhim et Chandra, Ambrish et Al Haddad, Kamal. 2017. « An adaptive novel control scheme of SPV system integrated to three phase AC distribution system ». IEEE Transactions on Industry Applications.
(Sous presse)

Lara, Jorge et Chandra, Ambrish. 2017. « Performance investigation of two novel HSFSI demodulation algorithms for encoderless FOC of PMSMs intended for EV propulsion ». IEEE Transactions on Industrial Electronics.
(Sous presse)

Rezkallah, M. et Chandra, A. et Singh, B. et Singh, S.. 2017. « Microgrid: Configurations, Control and Applications ». IEEE Transactions on Smart Grid.
(Sous presse)

Rezkallah, Miloud et Sharma, Shailendra et Chandra, Ambrish et Singh, Bhim et Rousse, Daniel R.. 2017. « Lyapunov function and sliding mode control approach for Solar-PV grid interface system ». IEEE Transactions on Industrial Electronics, vol. 64, nº 1. p. 785-795.

Sharma, Shailendra Kumar et Chandra, Ambrish et Saad, Maarouf et Lefebvre, Serge et Asber, Dalal et Lenoir, Laurent. 2017. « Voltage flicker mitigation employing smart loads with high penetration of renewable energy in distribution systems ». IEEE Transactions on Sustainable Energy, vol. 8, nº 1. p. 414-424.

Singh, Praveen Kumar et Singh, Bhim et Bist, Vashist et Al-Haddad, Kamal et Chandra, Ambrish. 2017. « BLDC motor drive based on bridgeless landsman PFC converter with single sensor and reduced stress on power devices ». IEEE Transactions on Industry Applications.
(Sous presse)

Tidjani, Fadoul Souleyman et Hamadi, Abdelhamid et Chandra, Ambrish et Pillay, Pragasen et Ndtoungou, Auguste. 2017. « Optimization of standalone microgrid considering active damping technique and smart power management using fuzzy logic supervisor ». IEEE Transactions on Smart Grid, vol. 8, nº 1. p. 475-484.

Chatelain, Jean-François

Daoud, M. et Chatelain, J. F. et Bouzid, A.. 2017. « Effect of rake angle-based Johnson-Cook material constants on the prediction of residual stresses and temperatures induced in Al2024-T3 machining ». International Journal of Mechanical Sciences, vol. 122. p. 392-404.

Delahaigue, J. et Chatelain, J. F. et Lebrun, G.. 2017. « Machining analysis of unidirectional and bi-directional flax-epoxy composite laminates ». [Article de conférence]. Proceedings of the Institution of Mechanical Engineers, Part L : Journal of Materials: Design and Applications, vol. 231, nº 1-2. p. 196-209.

Ghafarizadeh, Seyedbehzad et Tahvilian, Amir Masoud et Chatelain, Jean-François et Liu, Zhaoheng et Champliaud, Henri et Lebrun, Gilbert. 2017. « Numerical simulation of ball-end milling with SPH method ». International Journal of Advanced Manufacturing Technology, vol. 88, nº 1. p. 401-408.

Lamarre, Simon G. et Demers, Vincent et Chatelain, Jean-François. 2017. « Low-pressure powder injection molding using an innovative injection press concept ». International Journal of Advanced Manufacturing Technology, vol. 91, nº 5-8. p. 2595-2605.

Rimpault, X. et Chatelain, J. F. et Klemberg-Sapieha, J. E. et Balazinski, M.. 2017. « Tool wear and surface quality assessment of CFRP trimming using fractal analyses of the cutting force signals ». CIRP Journal of Manufacturing Science and Technology, vol. 16. p. 72-80.

Rimpault, Xavier et Chatelain, Jean-François et Klemberg-Sapieha, Jolanta Ewa et Balazinksi, Marek. 2017. « Burr height monitoring while drilling of CFRP/titanium/aluminium stacks ». Mechanics & Industry, vol. 18, nº 1.

Cheriet, Mohamed

Abuelwafa, Sherif et Mhiri, Mohamed et Hedjam, Rachid et Zhalehpour, Sara et Piper, Andrew et Wellmon, Chad et Cheriet, Mohamed. 2017. « Feature learning for footnote-based document image classification ». In 14th International Conference on Image Analysis and Recognition, ICIAR 2017, July 5, 2017 - July 7, 2017 (Montreal, QC, Canada, July 05-07, 2017) Coll. « Lecture Notes in Computer Science », vol. 10317. , p. 643-650. Springer Verlag.

Arabnejad, Ehsan et Farrahi Moghaddam, Reza et Cheriet, Mohamed. 2017. « PSI: Patch-based script identification using non-negative matrix factorization ». Pattern Recognition, vol. 67. p. 328-339.

Chherawala, Youssouf et Roy, Partha Pratim et Cheriet, Mohamed. 2017. « Combination of context-dependent bidirectional long short-term memory classifiers for robust offline handwriting recognition ». Pattern Recognition Letters, vol. 90. p. 58-64.

Chowdhury, Rasel et Ould-Slimane, Hakima et Talhi, Chamseddine et Cheriet, Mohamed. 2017. « Attribute-based encryption for preserving smart home data privacy ». In Enhanced Quality of Life and Smart Living : 15th International Conference, ICOST 2017, Paris, France, August 29-31, 2017, Proceedings (Paris, France, Aug. 29-31, 2017) Coll. « Lecture Notes in Computer Science », vol. 10461. , p. 185-197. Springer Verlag.

Dandres, Thomas et Farrahi Moghaddam, Reza et Nguyen, Kim Khoa et Lemieux, Yves et Samson, Réjean et Cheriet, Mohamed. 2017. « Consideration of marginal electricity in real-time minimization of distributed data centre emissions ». Journal of Cleaner Production, vol. 143. p. 116-124.

Dandres, Thomas et Vandromme, Nathan et Obrekht, Glasha et Wong, Andy et Nguyen, Kim Khoa et Lemieux, Yves et Cheriet, Mohamed et Samson, Réjean. 2017. « Consequences of future data center deployment in canada on electricity generation and environmental impacts: A 2015-2030 prospective study ». Journal of Industrial Ecology, vol. 21, nº 5. p. 1312-1322.

Farrahi Moghaddam, Reza et Asghari, Vahid et Farrahi Moghaddam, Fereydoun et Lemieux, Yves et Cheriet, Mohamed. 2017. « A Monte-Carlo approach to lifespan failure performance analysis of the network fabric in modular data centers ». Journal of Network and Computer Applications, vol. 87. p. 131-146.

Gagaoua, Meriem et Ghilas, Hamza et Tari, Abdelkamel et Cheriet, Mohamed. 2017. « Distribution, directional, structural and concavity features for historical Arabic handwritten recognition: A comparative study ». In ACM International Conference of Computing for Engineering and Sciences ( ICCES) (Istanbul, Turkey, July 22-24, 2017) Coll. « ACM International Conference Proceeding Series ». , p. 70-75. Association for Computing Machinery.

Hadjadj, Zineb et Cheriet, Mohamed et Meziane, Abdelkrim et Cherfa, Yazid. 2017. « A new efficient binarization method: application to degraded historical document images ». Signal, Image and Video Processing, vol. 11, nº 6. p. 1155-1162.

Ledjiar, Abderrahmane et Sampin, Emmanuel et Talhi, Chamseddine et Cheriet, Mohamed. 2017. « Network function virtualization as a service for multi-tenant software defined networks ». In 4th International Conference on Software-Defined Systems (SDS) (Valencia, Spain, May, 08-11 2017), p. 168-173. Piscataway, NJ, USA : IEEE.

Louafi, Habib et Coulombe, Stéphane et Cheriet, Mohamed. 2017. « Multi-objective optimization in dynamic content adaptation of slide documents ». IEEE Transactions on Services Computing, vol. 10, nº 2. p. 231-243.

M’hiri, Faten et Duong, Luc et Desrosiers, Christian et Dahdah, Nagib et Miró, Joaquim et Cheriet, Mohamed. 2017. « Automatic evaluation of vessel diameter variation from 2D X-ray angiography ». International Journal of Computer Assisted Radiology and Surgery. p. 1-10.
(Sous presse)

Moghaddam, Reza Farrahi et Lemieux, Yves et Cheriet, Mohamed. 2017. « Transparent clouds: An enhancement to abstraction ». In 10th IEEE International Conference on Cloud Computing (CLOUD) (Honolulu, HI, USA, June 25-27, 2017), p. 718-722. IEEE Computer Society.

Nafchi, Hossein Ziaei et Shahkolaei, Atena et Hedjam, Rachid et Cheriet, Mohamed. 2017. « CorrC2G: Color to gray conversion by correlation ». IEEE Signal Processing Letters, vol. 24, nº 11. p. 1651-1655.

Režnáková, Marta et Tencer, Lukas et Plamondon, Réjean et Cheriet, Mohamed. 2017. « Forgetting of unused classes in missing data environment using automatically generated data: Application to on-line handwritten gesture command recognition ». Pattern Recognition, vol. 72. p. 355-367.

Roy, Partha Pratim et Zhong, Guoqiang et Cheriet, Mohamed. 2017. « Tandem hidden Markov models using deep belief networks for offline handwriting recognition ». Frontiers of Information Technology and Electronic Engineering, vol. 18, nº 7. p. 978-988.

Salehani, Yaser Esmaeili et Cheriet, Mohamed. 2017. « Non-dictionary aided sparse unmixing of hyperspectral images via weighted nonnegative matrix factorization ». In 14th International Conference on Image Analysis and Recognition, ICIAR 2017, July 5, 2017 - July 7, 2017 (Montreal, QC, Canada, July 05-07, 2017) Coll. « Lecture Notes in Computer Science », vol. 10317. , p. 596-604. Springer Verlag.

Tencer, L. et Reznakova, M. et Cheriet, M.. 2017. « Summit-Training: A hybrid Semi-Supervised technique and its application to classification tasks ». Applied Soft Computing Journal, vol. 50. p. 1-20.

Tencer, L. et Reznakova, M. et Cheriet, M.. 2017. « UFuzzy: Fuzzy models with Universum ». Applied Soft Computing, vol. 59. p. 1-18.

Zhalehpour, Sara et Piper, Andrew et Wellmon, Chad et Cheriet, Mohamed. 2017. « Footnote-based document image classification ». In 14th International Conference on Image Analysis and Recognition, ICIAR 2017, July 5, 2017- July 7 2017 (Montreal, QC, Canada, July 05-07, 2017) Coll. « Lecture Notes in Computer Science », vol. 10317. , p. 634-642. Springer.

Zhang, Xiuzhen et Li, Yuxuan et Kotagiri, Ramamohanarao et Wu, Lifang et Tari, Zahir et Cheriet, Mohamed. 2017. « KRNN: k Rare-class Nearest Neighbour classification ». Pattern Recognition, vol. 62. p. 33-44.

Cloutier, Sylvain G.

Aidibe, Ali et Nejad, Mojtaba Kamali et Tahan, Antoine et Jahazi, Mohammad et Cloutier, Sylvain G.. 2017. « Surface characterization of die inserts used for LED lamp plastic lenses ». International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12. p. 3395-3403.

Al Shboul, A. et Trudeau, C. et Cloutier, S. et Siaj, M. et Claverie, J. P.. 2017. « Graphene dispersions in alkanes: Toward fast drying conducting inks ». Nanoscale, vol. 9, nº 28. p. 9893-9901.

Chaabane, Ibtihel et Banerjee, Debika et Touayar, Oualid et Cloutier, Sylvain G.. 2017. « Shallow V-shape nanostructured pit arrays in germanium using aqua regia electroless chemical etching ». Materials, vol. 10, nº 8.

Ka, Ibrahima et Gerlein, Luis Felipe et Nechache, Riad et Cloutier, Sylvain G.. 2017. « High-performance nanotube-enhanced perovskite photodetectors ». Scientific Reports, vol. 7.

Navarro-Pardo, F. et Benetti, D. et Benavides, J. et Zhao, H. G. et Cloutier, S. G. et Castano, V. M. et Vomiero, A. et Rosei, F.. 2017. « Nanofiber-structured TiO2 nanocrystals as a scattering layer in dye-sensitized solar cells ». ECS Journal of Solid State Science and Technology, vol. 6, nº 4. N32-N37.

Saulnier, Mathieu et Trudeau, Charles et Cloutier, Sylvain G. et Schougaard, Steen B.. 2017. « Investigation of CVD multilayered graphene as negative electrode for lithium-ion batteries ». Electrochimica Acta, vol. 244. p. 54-60.

Trudeau, Charles et Bolduc, Martin et Beaupré, Patrick et Topart, Patrice et Alain, Christine et Cloutier, Sylvain. 2017. « Inkjet-printed flexible active multilayered structures ». MRS Advances, vol. 2, nº 18. p. 1015-1020.

Constantin, Nicolas

Burasa, Pascal et Djerafi, Tarek et Constantin, Nicolas G. et Wu, Ke. 2017. « On-chip dual-band rectangular slot antenna for single-chip millimeter-wave identification tag in standard CMOS technology ». IEEE Transactions on Antennas and Propagation, vol. 65, nº 8. p. 3858-3868.

Sauvé, Quentin et Favre, Damien et Morin-Laporte, Gabriel et Taherzadeh-Sani, Mohammad et Constantin, Nicolas et Nabki, Frederic. 2017. « A calibration-free 13-bit 0.9 V differential SAR-ADC with hybrid DAC and dithering ». In IEEE International Symposium on Circuits and Systems (ISCAS) (Baltimore, MD, USA, May 28-31, 2017) Piscataway, NJ, USA : IEEE.

Sharma, Smarjeet et Constantin, Nicolas G. et Soliman, Yasser. 2017. « Positive envelope feedback for linearity improvement in RFIC PAs ». In 27th International Conference Radioelektronika (RADIOELEKTRONIKA) (Brno, Czech Republic, Czech Republic, Apr. 19-20, 2017) IEEE.

Coulombe, Stéphane

Golaghazadeh, Firouzeh et Coulombe, Stéphane et Coudoux, François et Corlay, Patrick. 2017. « Checksum-filtered list decoding applied to H.264 and H.265 video error correction ». IEEE Transactions on Circuits and Systems for Video Technology.
(Sous presse)

Golaghazadeh, Firouzeh et Coulombe, Stéphane et Coudoux, François-Xavier et Corlay, Patrick. 2017. « Low complexity H.264 list decoder for enhanced quality real-time video over IP ». In IEEE Canadian Conference on Electrical and Computer Engineering (CCECE) (Windsor, ON, Canada, Apr. 30-May 3, 2017) IEEE.

Hojati, Esmaeil et Franche, Jean-François et Coulombe, Stéphane et Vázquez, Carlos. 2017. « Massively parallel rate-constrained motion estimation using multiple temporal predictors in HEVC ». In IEEE International Conference on Multimedia and Expo (ICME) (Hong Kong, China, July 10-14, 2017), p. 43-48. Piscataway, NJ, USA : IEEE.

Louafi, Habib et Coulombe, Stéphane et Cheriet, Mohamed. 2017. « Multi-objective optimization in dynamic content adaptation of slide documents ». IEEE Transactions on Services Computing, vol. 10, nº 2. p. 231-243.

David, Éric

Arfaoui, M. A. et Dolez, P. I. et Dubé, M. et David, É.. 2017. « Development and characterization of a hydrophobic treatment for jute fibres based on zinc oxide nanoparticles and a fatty acid ». Applied Surface Science, vol. 397. p. 19-29.

David, E. et Castellon, J. et Fréchette, M. et Guo, M. et Helal, E.. 2017. « Dielectric properties of various metallic Oxide/LDPE nanocomposites compounded by different techniques ». In IEEE Electrical Insulation Conference (EIC) (Baltimore, MD, USA, June 11-14, 2017), p. 151-154. Piscataway, NJ, USA : IEEE.

David, E. et Stone, G. C. et Sasic, M.. 2017. « Dielectric response of machine insulation extracted from DC ramp test on individual stator bars ». In 35th IEEE Electrical Insulation Conference (EIC) (Baltimore, MD, USA, June 11-14, 2017), p. 46-49. IEEE.

Dolez, Patricia I. et Weltrowski, Marek et David, Eric. 2017. « Study of the parameters controlling nanoparticle dispersion for nanocomposite geomembrane applications ». In Geotechnical Frontiers 2017: Waste Containment, Barriers, Remediation, and Sustainable Geoengineering (Orlando, FL, USA, Mar. 12-15, 2017), p. 107-116. American Society of Civil Engineers.

Figueroa, José R. et Preda, Ioana et Noël, Sophie et Soulières, Bruno et Klamt, Thomas et Koepfler, Andreas et David, Éric. 2017. « Temperature measurement in thermal cycling of stator bars - the influence of the sensor installation technique ». In IEEE Electrical Insulation Conference (EIC) (Baltimore, MD, USA, June 11-14, 2017), p. 302-308. Piscataway, NJ, USA : IEEE.

Fréchette, M. F. et Ghafarizadeh, S. B. et Ahn, T. T. et Vadeboncoeur, S. et Guo, M. et David, E.. 2017. « LDPE nanocomposites containing functionalized SiO2 molecular structures: Properties associated with a ball-milled preparation ». In 1st International Conference on Electrical Materials and Power Equipment (ICEMPE) (Xi'an, China, May 14-17, 2017), p. 207-210. Piscataway, NJ, USA : IEEE.

Fréchette, M. F. et Ghafarizadeh, S. B. et David, É. et Zribi, E.. 2017. « Dielectric properties of epoxy composites containing Si/SiO2 core/shell nanoparticles ». In IEEE Electrical Insulation Conference (EIC) (Baltimore, MD, USA, June 11-14, 2017), p. 479-482. Piscataway, NJ, USA : IEEE.

Fréchette, M. et Ghafarizadeh, S. B. et Vadeboncoeur, S. et Guo, M. et Pirondelli, A. et Fabiani, D. et David, E.. 2017. « Polymer morphology considerations for nanodielectrics ». In IEEE Electrical Insulation Conference (EIC) (Baltimore, MD, USA, June 11-14, 2017), p. 155-160. Piscataway, NJ, USA : IEEE.

Fréchette, M. et Ghafarizadeh, S. B. et Vadeboncoeur, S. et Zribi, E. et Vanga-Bouanga, C. et David, E.. 2017. « Surface resistance to erosion for various polymer composites containing conductive nanofillers ». In 1st International Conference on Electrical Materials and Power Equipment (ICEMPE) (Xi'an, China, May 14-17, 2017), p. 65-69. IEEE.

Ghafarizadeh, S. B. et Fréchette, M. F. et David, E.. 2017. « Fabrication and dielectric, mechanical, and thermal properties of Low-Density Polyethylene (LDPE) composites containing surface-passivated silicon (Si/SiO2Core/Shell Nanoparticles) ». Polymer - Plastics Technology and Engineering.
(Sous presse)

Guo, Meng et David, Éric et Fréchette, Michel et Demarquette, Nicole R.. 2017. « Polyethylene/polyhedral oligomeric silsesquioxanes composites: Dielectric, thermal and rheological properties ». Polymer, vol. 115. p. 60-69.

Helal, E. et Amurin, L. G. et Carastan, D. J. et de Sousa Jr, R. R. et David, E. et Fréchette, M. et Demarquette, N. R.. 2017. « Interfacial molecular dynamics of styrenic block copolymer-based nanocomposites with controlled spatial distribution ». Polymer, vol. 113. p. 9-26.

Helal, Emna et David, Eric et Fréchette, Michel et Demarquette, Nicole R.. 2017. « Thermoplastic elastomer nanocomposites with controlled nanoparticles dispersion for HV insulation systems: Correlation between rheological, thermal, electrical and dielectric properties ». European Polymer Journal, vol. 94. p. 68-86.

Mebarki, Fouzia et David, Eric. 2017. « Dielectric characterization of thermally aged recycled Polyethylene Terephthalate and Polyethylene Naphthalate reinforced with inorganic fillers ». Polymer Engineering and Science.
(Sous presse)

Meng, Guo et Fréchette, Michel et David, Éric et Demarquette, Nicole R. et Daigle, Jean-Christophe. 2017. « Polyethylene/polyhedral oligomeric silsesquioxanes composites: electrical insulation for high voltage power cables ». IEEE Transactions on Dielectrics and Electrical Insulation, vol. 24, nº 2. p. 798-807.

Rogti, Fatiha et David, Éric. 2017. « Effect of SiC particles on the electrical conductivity of epoxy composites ». Journal of Electronic Materials, vol. 46, nº 2. p. 742-746.

Demarquette, Nicole R.

Demarquette, Nicole R. et Carastan, Danilo J.. 2017. « Rheological behavior of nanocomposites ». In Nanocomposites Materials : Synthesis, Properties and Applications. p. 233-264. CRC Press.

Demers, V. et Fareh, F. et Turenne, S. et Demarquette, N. R. et Scalzo, O.. 2017. « Experimental study on moldability and segregation of Inconel 718 feedstocks used in low-pressure powder injection molding ». Advanced Powder Technology.
(Sous presse)

Fareh, F. et Demers, V. et Demarquette, N. R. et Turenne, S. et Scalzo, O.. 2017. « Influence of segregation on rheological properties of wax-based feedstocks ». Powder Technology, vol. 320. p. 273-284.

Genoyer, Julie et Yee, Marcio et Soulestin, Jérémie et Demarquette, Nicole. 2017. « Compatibilization mechanism induced by organoclay in PMMA/PS blends ». Journal of Rheology, vol. 61, nº 4. p. 613-626.

Guo, Meng et David, Éric et Fréchette, Michel et Demarquette, Nicole R.. 2017. « Polyethylene/polyhedral oligomeric silsesquioxanes composites: Dielectric, thermal and rheological properties ». Polymer, vol. 115. p. 60-69.

Helal, E. et Amurin, L. G. et Carastan, D. J. et de Sousa Jr, R. R. et David, E. et Fréchette, M. et Demarquette, N. R.. 2017. « Interfacial molecular dynamics of styrenic block copolymer-based nanocomposites with controlled spatial distribution ». Polymer, vol. 113. p. 9-26.

Helal, Emna et David, Eric et Fréchette, Michel et Demarquette, Nicole R.. 2017. « Thermoplastic elastomer nanocomposites with controlled nanoparticles dispersion for HV insulation systems: Correlation between rheological, thermal, electrical and dielectric properties ». European Polymer Journal, vol. 94. p. 68-86.

Kuester, Scheyla et Demarquette, Nicole R. et Ferreira Jr, José Carlos et Soares, Bluma G. et Barra, Guilherme M. O.. 2017. « Hybrid nanocomposites of thermoplastic elastomer and carbon nanoadditives for electromagnetic shielding ». European Polymer Journal, vol. 88. p. 328-339.

Kurusu, Rafael S. et Demarquette, Nicole R.. 2017. « Surface properties evolution in electrospun polymer blends by segregation of hydrophilic or amphiphilic molecules ». European Polymer Journal, vol. 89. p. 129-137.

Meng, Guo et Fréchette, Michel et David, Éric et Demarquette, Nicole R. et Daigle, Jean-Christophe. 2017. « Polyethylene/polyhedral oligomeric silsesquioxanes composites: electrical insulation for high voltage power cables ». IEEE Transactions on Dielectrics and Electrical Insulation, vol. 24, nº 2. p. 798-807.

Rezabeigi, Ehsan et Sta, Marwa et Swain, Mitasha et McDonald, Julia et Demarquette, Nicole R. et Drew, Robin A. L. et Wood-Adams, Paula M.. 2017. « Electrospinning of porous polylactic acid fibers during nonsolvent induced phase separation ». Journal of Applied Polymer Science, vol. 134, nº 20.

Demers, Vincent

Chen, Jianqiang et Demers, Vincent et Cadotte, Eve-Line et Turner, Daniel et Bocher, Philippe. 2017. « Structural performance of inconel 625 superalloy brazed joints ». Journal of Materials Engineering and Performance, vol. 26, nº 2. p. 547-553.

Demers, V. et Fareh, F. et Turenne, S. et Demarquette, N. R. et Scalzo, O.. 2017. « Experimental study on moldability and segregation of Inconel 718 feedstocks used in low-pressure powder injection molding ». Advanced Powder Technology.
(Sous presse)

Fareh, F. et Demers, V. et Demarquette, N. R. et Turenne, S. et Scalzo, O.. 2017. « Influence of segregation on rheological properties of wax-based feedstocks ». Powder Technology, vol. 320. p. 273-284.

Lamarre, Simon G. et Demers, Vincent et Chatelain, Jean-François. 2017. « Low-pressure powder injection molding using an innovative injection press concept ». International Journal of Advanced Manufacturing Technology, vol. 91, nº 5-8. p. 2595-2605.

Desharnais, Jean-Marc

Ouanouki, R. et April, A. et Abran, A. et Gomez, A. et Desharnais, J. M.. 2017. « Toward building RDB to HBase conversion rules ». Journal of Big Data, vol. 4, nº 1.

Deslandes, Dominic

Jenabi, Sarvenaz et Deslandes, Dominic et Boone, François et Charlebois, Serge A.. 2017. « A low-cost fabrication method for sub-millimeter wave GaAs Schottky diode ». Semiconductor Science and Technology, vol. 32, nº 10.

Jenabi, Sarvenaz et Malekabadi, Ali et Deslandes, Dominic et Boone, François et Charlebois, Serge A.. 2017. « Submillimeter wave GaAs Schottky diode application based study and optimization for 0.1–1.5 THz ». Solid-State Electronics, vol. 134. p. 65-73.

Ndoye, Majid et Kerroum, Issam et Deslandes, Dominic et Domingue, Frédéric. 2017. « Air-filled substrate integrated cavity resonator for humidity sensing ». Sensors and Actuators, B: Chemical, vol. 252. p. 951-955.

Rahmani, Mohammad H. et Deslandes, Dominic. 2017. « Backward to forward scanning periodic leaky-wave antenna with wide scanning range ». IEEE Transactions on Antennas and Propagation, vol. 65, nº 7. p. 3326-3335.

Despins, Charles

Luong, Phuong et Despins, Charles et Gagnon, François et Tran, Le-Nam. 2017. « A fast converging algorithm for limited fronthaul C-RANs design: Power and throughput trade-off ». In IEEE International Conference on Communications (ICC) (Paris, France, May 21-25, 2017) IEEE.

Luong, Phuong et Despins, Charles et Gagnon, François et Tran, Le-Nam. 2017. « Designing Green C-RAN with limited fronthaul via mixed-integer second order cone programming ». In IEEE International Conference on Communications (ICC) (Paris, France, May 21-25, 2017) IEEE.

Luong, Phuong et Gagnon, François et Despins, Charles et Tran, Le-Nam. 2017. « Optimal joint remote radio head selection and beamforming design for limited fronthaul C-RAN ». IEEE Transactions on Signal Processing, vol. 65, nº 21. p. 5605-5620.

Luong, Phuong et Tran, Le-Nam et Despins, Charles et Gagnon, François. 2017. « Joint beamforming and remote radio head selection in limited fronthaul C-RAN ». In 84th IEEE Vehicular Technology Conference (VTC-Fall) (Montreal, QC, Canada, Sept. 18-21, 2016) IEEE.

Rahman, M. Moshiur et Despins, Charles et Affes, Sofiene. 2017. « End-to-end programmable, cloud-based virtualized HetNet: Advances made & challenges to address ». Computer Communications, vol. 105. p. 14-32.

Desrosiers, Christian

Barkallah, Eya et Freulard, Johan et Otis, Martin J. D. et Ngomo, Suzy et Ayena, Johannes C. et Desrosiers, Christian. 2017. « Wearable devices for classification of inadequate posture at work using neural networks ». Sensors, vol. 17, nº 9.

Chaddad, Ahmad et Desrosiers, Christian et Hassan, Lama et Tanougast, Camel. 2017. « Hippocampus and amygdala radiomic biomarkers for the study of autism spectrum disorder ». BMC Neuroscience, vol. 18, nº 1. p. 52.

Chaddad, Ahmad et Desrosiers, Christian et Toews, Matthew. 2017. « Multi-scale radiomic analysis of sub-cortical regions in MRI related to autism, gender and age ». Scientific Reports, vol. 7.

Chaddad, Ahmad et Desrosiers, Christian et Toews, Matthew et Abdulkarim, Bassam. 2017. « Predicting survival time of lung cancer patients using radiomic analysis ». Oncotarget, vol. 8, nº 61. p. 104393-104407.

Dolz, Jose et Ben Ayed, Ismail et Desrosiers, Christian. 2017. « Unbiased shape compactness for segmentation ». In Medical Image Computing and Computer-Assisted Intervention : MICCAI 2017 : 20th International Conference, Quebec City, QC, Canada, September 11-13, 2017 : Proceedings : Part I (Quebec City, QC, Canada, Sept. 11-13, 2017) Coll. « Lecture Notes in Computer Science », vol. 10433. , p. 755-763. Springer Verlag.

Dolz, Jose et Desrosiers, Christian et Ben Ayed, Ismail. 2017. « 3D fully convolutional networks for subcortical segmentation in MRI: A large-scale study ». NeuroImage.
(Sous presse)

Haj-Hassan, Hawraa et Chaddad, Ahmad et Harkouss, Youssef et Desrosiers, Christian et Toews, Matthew et Tanougast, Camel. 2017. « Classifications of multispectral colorectal cancer tissues using convolution neural network ». Journal of Pathology Informatics, vol. 8, nº 1.

Kumar, Kuldeep et Desrosiers, Christian et Siddiqi, Kaleem et Colliot, Olivier et Toews, Matthew. 2017. « Fiberprint: A subject fingerprint based on sparse code pooling for white matter fiber analysis ». NeuroImage, vol. 158. p. 242-259.

Kumar, Kuldeep et Gori, Pietro et Charlier, Benjamin et Durrleman, Stanley et Colliot, Olivier et Desrosiers, Christian. 2017. « White matter fiber segmentation using functional varifolds ». In Graphs in Biomedical Image Analysis, Computational Anatomy and Imaging Genetics : First International Workshop, GRAIL 2017, 6th International Workshop, MFCA 2017, and Third International Workshop, MICGen 2017, Held in Conjunction with MICCAI 2017, Québec (Québec, QC, Canada, Sept. 10-14, 2017) Coll. « Lecture Notes in Computer Science », vol. 10551. , p. 92-100. Springer.

M’hiri, Faten et Duong, Luc et Desrosiers, Christian et Dahdah, Nagib et Miró, Joaquim et Cheriet, Mohamed. 2017. « Automatic evaluation of vessel diameter variation from 2D X-ray angiography ». International Journal of Computer Assisted Radiology and Surgery. p. 1-10.
(Sous presse)

Zhang, Mingli et Desrosiers, Christian. 2017. « Image completion with global structure and weighted nuclear norm regularization ». In 2017 International Joint Conference on Neural Networks (IJCNN) (Anchorage, AK, USA, May 14-19, 2017), p. 4187-4193. Piscataway, NJ, USA : IEEE.

Zhang, Mingli et Desrosiers, Christian. 2017. « Image denoising based on sparse representation and gradient histogram ». IET Image Processing, vol. 11, nº 1. p. 54-63.

Zhang, Mingli et Desrosiers, Christian et Zhang, Caiming. 2017. « Effective compressive sensing via reweighted total variation and weighted nuclear norm regularization ». In IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP) (New Orleans, LA, USA, Mar. 05-09, 2017), p. 1802-1806. IEEE.

Dessaint, Louis-A.

Motapon, Souleman Njoya et Lupien-Bedard, Alexandre et Dessaint, Louis-A. et Fortin-Blanchette, Handy et Al-Haddad, Kamal. 2017. « A Generic electrothermal li-ion battery model for rapid evaluation of cell temperature temporal evolution ». IEEE Transactions on Industrial Electronics, vol. 64, nº 2. p. 998-1008.

Nguyen duc, Huy et Kamwa, Innocent et Dessaint, Louis- A. et Cao-Duc, Huy. 2017. « A novel approach for early detection of impending voltage collapse events based on the support vector machine ». International Transactions on Electrical Energy Systems.
(Sous presse)

Vahedi, Hani et Shojaei, Ali Asghar et Dessaint, Louis- A. et Al-Haddad, Kamal. 2017. « Reduced DC link voltage active power filter using modified PUC5 converter ». IEEE Transactions on Power Electronics.
(Sous presse)

Wafaa, Majid Baa et Dessaint, Louis- A.. 2017. « Multi-objective stochastic optimal power flow considering voltage stability and demand response with significant wind penetration ». IET Generation, Transmission and Distribution, vol. 11, nº 14. p. 3499-3509.

Doré, Sylvie

Twahir, Abdulhalim et Moustapha, Hany et Doré, Sylvie et Roy, François. 2017. « A framework for an integrated turbine rotor design system ». In Global Power and Propulsion Forum : Proceedings (Zurich, Switzerland, Jan. 16-18, 2017) Global Power & Propulsion Society.

Doutres, Olivier

Benacchio, Simon et Varoquaux, Arthur et Le Troter, Arnaud et Wagnac, Eric et Doutres, Olivier et Bendahan, David et Callot, Virginie et Sgard, Franck C.. 2017. « MRI investigation of the ear canal deformation due to earplugs: A first step toward understanding wearing comfort ». [Résumé d'un article de conférence]. Journal of the Acoustical Society of America, vol. 141, nº 5. p. 4024.

Carillo, Kévin et Sgard, Franck C. et Doutres, Olivier. 2017. « Numerical prediction of the broadband sound attenuation of a commercial earmuff: Impact of the cushion modeling ». [Résumé d'un article de conférence]. Journal of the Acoustical Society of America, vol. 141, nº 5. p. 3733.

Doutres, Olivier et Sgard, Franck C. et Terroir, Jonathan. 2017. « A review about hearing protection comfort and its evaluation ». [Résumé d'un article de conférence]. Journal of the Acoustical Society of America, vol. 141, nº 5. p. 4025.

Gholami, Mohammad S. et Doutres, Olivier et Atalla, Noureddine. 2017. « Effect of microstructure closed-pore content on the mechanical properties of flexible polyurethane foam ». International Journal of Solids and Structures, vol. 112. p. 97-105.

Padois, Thomas et Doutres, Olivier et Sgard, Franck et Berry, Alain. 2017. « Time domain localization technique with sparsity constraint for imaging acoustic sources ». Mechanical Systems and Signal Processing, vol. 94. p. 85-93.

Padois, Thomas et Gaudreau, Marc-André et Doutres, Olivier et Sgard, Franck C. et Berry, Alain et Marcotte, Pierre et Laville, Frédéric. 2017. « Comparison of time domain noise source localization techniques: Application to impulsive noise of nail guns ». [Résumé d'un article de conférence]. Journal of the Acoustical Society of America, vol. 141, nº 5. p. 3750.

Padois, Thomas et Sgard, Franck et Doutres, Olivier et Berry, Alain. 2017. « Acoustic source localization using a polyhedral microphone array and an improved generalized cross-correlation technique ». Journal of Sound and Vibration, vol. 386. p. 82-99.

Sgard, Franck et Nélisse, Hugues et Benacchio, Simon et Doutres, Olivier et Padois, Thomas et Gaudreau, Marc-André. 2017. « A finite-element model to predict incidence dependent and diffuse field noise reduction based attenuation of earmuffs ». In 24th International Congress on Sound and Vibration (ICSV) (London, United kingdom, July 23-27, 2017) International Institute of Acoustics and Vibration (IIAV).

Dubé, Jean-Sébastien

Shoari, Niloofar et Dubé, Jean-Sébastien. 2017. « Application of mixed effects models for characterizing contaminated sites ». Chemosphere, vol. 166. p. 380-388.

Dubé, Martine

Arfaoui, M. A. et Dolez, P. I. et Dubé, M. et David, É.. 2017. « Development and characterization of a hydrophobic treatment for jute fibres based on zinc oxide nanoparticles and a fatty acid ». Applied Surface Science, vol. 397. p. 19-29.

Dermanaki Farahani, Rouhollah et Dube, Martine. 2017. « Printing polymer nanocomposites and composites in three dimensions ». Advanced Engineering Materials.
(Sous presse)

Farahani, Rouhollah Dermanaki et Dubé, Martine. 2017. « Novel heating elements for induction welding of carbon fiber/polyphenylene sulfide thermoplastic composites ». Advanced Engineering Materials.
(Sous presse)

Poulin, Jean-René et Terriault, Patrick et Dubé, Martine et Vachon, Pierre-Luc. 2017. « Development of a morphing wing extrados made of composite materials and actuated by shape memory alloys ». Journal of Intelligent Material Systems and Structures, vol. 28, nº 11. p. 1437-1453.

Duchaine, Vincent

Cockburn, Deen et Roberge, Jean-Philippe et Thuy-Hong-Loan, Le et Maslyczyk, Alexis et Duchaine, Vincent. 2017. « Grasp stability assessment through unsupervised feature learning of tactile images ». In 2017 IEEE International Conference on Robotics and Automation (ICRA) (Singapore, Singapore, May 29- June 03, 2017), p. 2238-2244. Piscataway, NJ, USA : IEEE.

Motamedi, M. Reza et Florant, David et Duchaine, Vincent. 2017. « Comparing the exteroceptive feedback of normal stress, skin stretch, and vibrotactile stimulation for restitution of static events ». Frontiers in Robotics and AI, vol. 4.

Motamedi, M. Reza et Roberge, Jean-Philippe et Duchaine, Vincent. 2017. « The Use of vibrotactile feedback to restore texture recognition capabilities, and the effect of subject training ». IEEE Transactions on Neural Systems and Rehabilitation Engineering, vol. 25, nº 8. p. 1230-1239.

Reza Motamedi, M. et Otis, Martin et Duchaine, Vincent. 2017. « The Impact of Simultaneously Applying Normal Stress and Vibrotactile Stimulation for Feedback of Exteroceptive Information ». Journal of Biomechanical Engineering, vol. 139, nº 6.

Rispal, Samuel et Rana, Axay K. et Duchaine, Vincent. 2017. « Texture roughness estimation using dynamic tactile sensing ». In 3rd International Conference on Control, Automation and Robotics (ICCAR) (Nagoya, Japan, April 22-24, 2017), p. 555-562. Piscataway, NJ, USA : IEEE.

Rispal, Samuel et Rana, Axay et Duchaine, Vincent. 2017. « Textures recognition through tactile exploration for robotic applications ». In 3rd International Conference on Control, Automation and Robotics (ICCAR) (Nagoya, Japan, April 22-24, 2017), p. 121-128. IEEE.

Thuy-Hong-Loan, Le et Maslyczyk, Alexis et Roberge, Jean-Philippe et Duchaine, Vincent. 2017. « A highly sensitive multimodal capacitive tactile sensor ». In 2017 IEEE International Conference on Robotics and Automation (ICRA) (Singapore, Singapore, May 29- June 03, 2017), p. 407-412. Piscataway, NJ, USA : IEEE.

Duhaime, François

Chapuis, R. P. et Duhaime, F.. 2017. « Taking into account data accuracy for interpretation of slug tests in confined or unconfined aquifers ». Geotechnical Testing Journal, vol. 40, nº 1. p. 122-133.

Duhaime, François et Chapuis, Robert P.. 2017. « Biot analysis of deformation during variable-head field permeability tests in soft soils ». In Proceedings of the 19th International Conference on Soil Mechanics and Geotechnical Engineering (Seoul, Korea, Sept. 17-22, 2017)

Duhaime, François et Chapuis, Robert P. et Marefat, Vahid et Benabdallah, El Mehdi. 2017. « Influence of seasonal hydraulic head changes on slug tests conducted in shallow low-permeability soils ». Engineering Geology, vol. 228. p. 385-394.

Dumberry, Kevin et Duhaime, François et Éthier, Yannic. 2017. « Erosion monitoring during core overtopping using a laboratory model with digital image correlation and X-ray microcomputed tomography ». Canadian Geotechnical Journal = Revue Canadienne de Géotechnique.
(Sous presse)

Marefat, Vahid et Duhaime, Francois et Chapuis, Robert P. et Le Borgne, Vincent. 2017. « Fully grouted piezometers in a soft Champlain clay deposit Part I: Piezometer installation ». Geotechnical News, vol. 35, nº 3. p. 35-38.

Dumouchel, Pierre

Ouali, Chahid et Dumouchel, Pierre et Gupta, Vishwa. 2017. « Robust video fingerprints using positions of salient regions ». In IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP) (New Orleans, LA, USA, Mar. 05-09, 2017), p. 3041-3045. IEEE.

Duong, Luc

Abdolmanafi, Atefeh et Duong, Luc et Dahdah, Nagib et Cheriet, Farida. 2017. « Deep feature learning for automatic tissue classification of coronary artery using optical coherence tomography ». Biomedical Optics Express, vol. 8, nº 2. p. 1203-1220.

Martin, Remi et Vachon, Etienne et Miro, Joaquim et Duong, Luc. 2017. « 3D reconstruction of vascular structures using graph-based voxel coloring ». In 14th IEEE International Symposium on Biomedical Imaging (ISBI) (Melbourne, VIC, Australia, Apr. 18-21, 2017), p. 1032-1035. IEEE Computer Society.

M’hiri, Faten et Duong, Luc et Desrosiers, Christian et Dahdah, Nagib et Miró, Joaquim et Cheriet, Mohamed. 2017. « Automatic evaluation of vessel diameter variation from 2D X-ray angiography ». International Journal of Computer Assisted Radiology and Surgery. p. 1-10.
(Sous presse)

Tibamoso, Gerardo et Ratté, Sylvie et Duong, Luc. 2017. « Left ventricle wall detection from ultrasound images using shape and appearance information ». In 14th International Conference on Image Analysis and Recognition, ICIAR 2017, July 5, 2017 - July 7, 2017 (Montreal, QC, Canada, July 05-07, 2017) Coll. « Lecture Notes in Computer Science », vol. 10317. , p. 63-70. Springer Verlag.

Vachon, Étienne et Miró, Joaquim et Duong, Luc. 2017. « Online C-arm calibration using a marked guide wire for 3D reconstruction of pulmonary arteries ». In Medical Imaging 2017: Image-Guided Procedures, Robotic Interventions, and Modeling (Orlando, FL, USA, Feb. 11-16, 2017) Coll. « Proceeding of SPIE », vol. 10135. SPIE.

Errico, Fausto

Errico, Fausto et Crainic, Teodor Gabriel et Malucelli, Federico et Nonato, Maddalena. 2017. « A benders decomposition approach for the symmetric TSP with generalized latency arising in the design of semiflexible transit systems ». Transportation Science, vol. 51, nº 2. p. 706-722.

Fihey, Jean-Luc

Mirakhorli, F. et Cao, X. et Pham, X. T. et Wanjara, P. et Fihey, J. L.. 2017. « Technical challenges in narrow-gap root pass welding during tandem and hybrid laser-arc welding of a thick martensitic stainless steel ». In International conference on processing and manufacturing of advanced materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) Coll. « Materials Science Forum », vol. 879. , p. 1305-1310. Trans Tech Publications.

Forgues, Daniel

Boton, Conrad et Forgues, Daniel. 2017. « The need for a new systemic approach to study collaboration in the construction industry ». In Fifth Creative Construction Conference (CCC) (Primosten, Croatia, June 19-22, 2017) Coll. « Procedia Engineering », vol. 196. , p. 1043-1050. Elsevier.

Boton, Conrad et Forgues, Daniel et Halin, Gilles. 2017. « Les enjeux liés à l’intégration de l’approche BIM de modélisation des données du bâtiment à l’enseignement universitaire : cas d’une école d’ingénierie ». Revue Internationale des Technologies en Pédagogie Universitaire, vol. 14, nº 2. p. 5-23.

Dupuis, M. et April, A. et Lesage, P. et Forgues, D.. 2017. « Method to enable LCA analysis through each level of development of a BIM model ». In Creative Construction Conference (CCC) (Primosten, Croatia, June 19-22, 2017) Coll. « Procedia Engineering », vol. 196. , p. 857-863.

Forgues, Daniel et Chiocchio, François et Lavallée, Audrey et Laberge, Vincent. 2017. « Performance de la conception intégrée et intégration des technologies de l’information dans un contexte de travail multidisciplinaire ». Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 44, nº 2. p. 129-137.

Forgues, Daniel et Lapalme, James. 2017. « Research issues in attempting to support an architecture firm transition from fragmented CAD to BIM collaborative design ». In Cooperative Design, Visualization, and Engineering : 14th International Conference, CDVE 2017, Mallorca, Spain, September 17-20, 2017, Proceedings (Mallorca, Spain, Sept. 17-20, 2017) Coll. « Lecture Notes in Computer Science », vol. 10451. , p. 185-192. Springer.

Poirier, Erik A. et Forgues, Daniel et Staub-French, Sheryl. 2017. « Understanding the impact of BIM on collaboration: a Canadian case study ». Building Research and Information, vol. 45, nº 6. p. 684-695.

Fortin Blanchette, Handy

Grégoire, Luc-André et Fortin Blanchette, Handy et Bélanger, Jean et Al-Haddad, Kamal. 2017. « A stability and accuracy validation method for multirate digital simulation ». IEEE Transactions on Industrial Informatics, vol. 13, nº 2. p. 512-519.

Motapon, Souleman Njoya et Lupien-Bedard, Alexandre et Dessaint, Louis-A. et Fortin-Blanchette, Handy et Al-Haddad, Kamal. 2017. « A Generic electrothermal li-ion battery model for rapid evaluation of cell temperature temporal evolution ». IEEE Transactions on Industrial Electronics, vol. 64, nº 2. p. 998-1008.

Nguyen, Tung Ngoc et Blanchette, Handy Fortin. 2017. « Application of Y-cap on noise attenuation in low power part of power converter ». In IEEE International Conference on Industrial Technology (ICIT 2017) (Toronto, ON, Canada, Mar. 23-25, 2017), p. 48-53. IEEE.

Nguyen, Tung Ngoc et Blanchette, Handy Fortin et Wang, Ruxi. 2017. « An accurate modeling approach to compute noise transfer gain in complex low power plane geometries of power converters ». Journal of Power Electronics, vol. 17, nº 2. p. 411-421.

Nguyen, Tung Ngoc et Fortin Blanchette, Handy et Wang, Ruxi. 2017. « General impedance representation of passive devices based on measurement ». In IEEE International Conference on Industrial Technology (ICIT) (Toronto, ON, Canada, Mar. 22-25, 2017), p. 107-112. Piscataway, NJ, USA : IEEE.

Nguyen, Tung Ngoc et Fortin Blanchette, Handy et Wang, Ruxi. 2017. « General impedance representation of passive devices based on measurement ». IEEE Transactions on Power Electronics.
(Sous presse)

Rmili, Lazhar et Hamouda, Mahmoud et Rahmani, Salem et Blanchette, Handy Fortin et Al-Haddad, Kamal. 2017. « PWM-based integral sliding-mode controller for unity input power factor operation of indirect matrix converter ». Journal of Power Electronics, vol. 17, nº 4. p. 1048-1057.

Sleiman, Mohammad et Kedjar, Bachir et Fortin Blanchette, Handy et Kanaan, Hadi et Al-Haddad, Kamal. 2017. « A simple control method for modular multilevel converters ». In IEEE International Conference on Industrial Technology (ICIT) (Toronto, ON, Canada, Mar. 22-25, 2017), p. 1486-1491. Piscataway, NJ, USA : IEEE.

Tremblay, Olivier et Fortin-Blanchette, Handy et Gagnon, Richard et Brissette, Yves. 2017. « Contribution to stability analysis of power hardware-in-the-loop simulators ». IET Generation, Transmission and Distribution, vol. 11, nº 12. p. 3073-3079.

Francis, Adel

Francis, Adel. 2017. « Chronographic allocation techniques for construction projects ». Journal of Civil Engineering and Science, vol. 6, nº 1. p. 24-36.

Francis, Adel. 2017. « Simulating uncertainties in construction projects with chronographical scheduling logic ». Journal of Construction Engineering and Management, vol. 143, nº 1.

Francis, Adel et Morin Pépin, Stéphane. 2017. « Chronographic space planning: a case study for construction projects ». In CSCE Annual Conference (Vancouver, B.C, Canada, May 30th-June 3, 2017)

Francis, Adel et Morin-Pepin, Stéphane. 2017. « The concept of float calculation based on the site occupation using the chronographical logic ». In Fifth Creative Construction Conference (CCC) (Primosten, Croatia, June 19-22, 2017) Coll. « Procedia Engineering », vol. 196. , p. 690-697. Elsevier.

Gagnon, François

Chamseddine, Abbas et Akhrif, Ouassima et Charland-Arcand, Guillaume et Gagnon, François et Couillard, Denis. 2017. « Communication relay for multiground units with unmanned aerial vehicle using only signal strength and angle of arrival ». IEEE Transactions on Control Systems Technology, vol. 25, nº 1. p. 286-293.

El Alaoui Ismaili, Zakaria et Ajib, Wessam et Gagnon, François et Nabki, Frederic. 2017. « A 0.13 μm CMOS fully integrated 0.1 ~ 12 GHz frequency synthesizer for avionic SDR applications ». In IEEE International Symposium on Circuits and Systems (ISCAS) (Baltimore, MD, USA, May 28-31, 2017) Piscataway, NJ, USA : IEEE.

Eshteiwi, Khaled et Gagnon, François et Kaddoum, Georges et Ben Fredj, Kais. 2017. « Performance analysis of peer-to-peer V2V wireless communications in the presence of interference ». In IEEE 28th International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) (Montreal, QC, Canada, Oct. 8-13, 2017)
(Sous presse)

Gagnon, Ghyslain et Gagnon, François et Roberts, Gordon W.. 2017. « The analytic expression of the output spectrum of ADCs with nonlinear binary-weighted DACs and Gaussian input signals ». In IEEE International Symposium on Circuits and Systems (ISCAS) (Baltimore, MD, USA, May 28-31, 2017) Piscataway, NJ, USA : IEEE.

Hertz, Alain et Montagné, Romain et Gagnon, François. 2017. « Online algorithms for the maximum k-colorable subgraph problem ». Computers and Operations Research.
(Sous presse)

Iran, Hung et Kaddoum, Georges et Gagnon, François et Sibomana, Louis. 2017. « Cognitive radio network with secrecy and interference constraints ». Physical Communication, vol. 22. p. 32-41.

Lakani, Sara et Gagnon, François. 2017. « Optimal design and energy efficient binary resource allocation of interference-limited cellular relay-aided systems with consideration of queue stability ». IEEE Access, vol. 5. p. 8459-8474.

Luong, Phuong et Despins, Charles et Gagnon, François et Tran, Le-Nam. 2017. « A fast converging algorithm for limited fronthaul C-RANs design: Power and throughput trade-off ». In IEEE International Conference on Communications (ICC) (Paris, France, May 21-25, 2017) IEEE.

Luong, Phuong et Despins, Charles et Gagnon, François et Tran, Le-Nam. 2017. « Designing Green C-RAN with limited fronthaul via mixed-integer second order cone programming ». In IEEE International Conference on Communications (ICC) (Paris, France, May 21-25, 2017) IEEE.

Luong, Phuong et Gagnon, François et Despins, Charles et Tran, Le-Nam. 2017. « Optimal joint remote radio head selection and beamforming design for limited fronthaul C-RAN ». IEEE Transactions on Signal Processing, vol. 65, nº 21. p. 5605-5620.

Luong, Phuong et Tran, Le-Nam et Despins, Charles et Gagnon, François. 2017. « Joint beamforming and remote radio head selection in limited fronthaul C-RAN ». In 84th IEEE Vehicular Technology Conference (VTC-Fall) (Montreal, QC, Canada, Sept. 18-21, 2016) IEEE.

Montagne, Romain et Hertz, Alain et Gagnon, François. 2017. « A multi-cell graph based dynamic resource allocation scheme for multi-user wireless networks ». AEU - International Journal of Electronics and Communications, vol. 76. p. 60-70.

Parzysz, Fanny et Mai, Vu et Gagnon, François. 2017. « Modeling and analysis of energy efficiency and interference for cellular relay deployment ». IEEE Transactions on Wireless Communications, vol. 16, nº 2. p. 982-997.

Sarr, Ndéye Bineta et Yazbek, Abdul Karim et Boeglen, Herve et Cances, J. P. et Vauzelle, Rodolphe et Gagnon, François. 2017. « An impulsive noise resistant physical layer for smart grid communications ». In IEEE International Conference on Communications (ICC) (Paris, France, May 21-25, 2017) Piscataway, NJ, USA : IEEE.

Gagnon, Ghyslain

Gagnon, Ghyslain et Gagnon, François et Roberts, Gordon W.. 2017. « The analytic expression of the output spectrum of ADCs with nonlinear binary-weighted DACs and Gaussian input signals ». In IEEE International Symposium on Circuits and Systems (ISCAS) (Baltimore, MD, USA, May 28-31, 2017) Piscataway, NJ, USA : IEEE.

Ziabakhsh, Soheyl et Gagnon, Ghyslain et Roberts, Gordon W.. 2017. « A time-mode LDI-based resonator for a band-pass ΔΣ TDC ». In 2017 IEEE 60th International Midwest Symposium on Circuits and Systems (MWSCAS) (Boston, MA, USA, Aug. 6-9, 2017), p. 1296-1299. Piscataway, NJ, USA : IEEE.

Gardoni, Mickaël

Cherifi, A. et M'Bassègue, P. et Gardoni, M. et Renaudc, J. et Houssin, R.. 2017. « Knowledge management and eco-innovation: Issues and organizational challenges to small and medium enterprises ». In 7th Annual Conference on Industrial Engineering and Operations Management (Rabat, Morroco, Apr. 11-13, 2017), p. 750. IEOM.

Cherifi, Ahmed et Gardoni, Mickaël et M'Bassègue, Patrick et Renaud, Jean et Houssin, Rémy. 2017. « Knowledge management and eco-innovation: Issues and organizational challenges to small and medium enterprises ». In Proceedings of the 21st International Conference on Engineering Design (ICED) (Vancouver, B.C, Canada, Aug. 21-25, 2017) Coll. « ICED ». , p. 119-128. The Design Society.

Escandon-Quintanilla, Ma-Lorena et Gardoni, Mickael et Cohendet, Patrick. 2017. « Improving concept development with data exploration in the context of an innovation and technological design course ». International Journal on Interactive Design and Manufacturing.
(Sous presse)

Mbassegue, Patrick et Gardoni, Mickaël et Tahboub, Zain. 2017. « The knowledge benchmarking process framework: A new basis to analyze megaprojects challenges and practices ». In International Conference on Engineering Design (ICED) (Vancouver, BC, Canada, Aug. 21-25, 2017) Coll. « ICED ». , p. 111-120. The Desing Society.

Rhéaume, Louis et Gardoni, Mickaël. 2017. « Infocom business models innovation with the development of corporate universities ». International Journal of Innovation and Learning, vol. 21, nº 1. p. 98-113.

Sun, Xiaoguang et Houssin, Rémy et Renaud, Jean et Gardoni, Mickaël. 2017. « Generating a user manual in the early design phase to guide the design activities ». In Advances on Mechanics, Design Engineering and Manufacturing : Proceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (JCM 2016), 14-16 September, 2016, Catania, Italy (Catania, Italy, Sept. 14-16, 2016) Coll. « Lecture Notes in Mechanical Engineering ». , p. 1167-1176. Springer International Publishing.

Gargour, Christian

Abou-Abbas, Lina et Tadj, Chakib et Gargour, Christian et Montazeri, Leila. 2017. « Expiratory and inspiratory cries detection using different signals' decomposition techniques ». Journal of Voice, vol. 31, nº 2. 259.e13-259.e28.

Garnier, François

Khou, J. C. et Ghedhaïfi, W. et Vancassel, X. et Montreuil, E. et Garnier, F.. 2017. « CFD simulation of contrail formation in the near field of a commercial aircraft: Effect of fuel sulfur content ». Meteorologische Zeitschrift.
(Sous presse)

Moret, Maxime et Delecourt, Alexandre et Moustapha, Hany et Abenhaim, Acher-Igal et Garnier, Francois. 2017. « Automated thermal and stress preliminary analyses applied to a turbine rotor ». Aerospace Science and Technology, vol. 63. p. 123-131.

Ouellet, Yannick et Savaria, Christian et Roy, François et Moustapha, Hany et Garnier, François. 2017. « A Preliminary design system for turbine discs ». International Journal of Turbo & Jet-Engines.
(Sous presse)

Gauthier, Guy

Brahmi, Abdelkrim et Saad, Maarouf et Gauthier, Guy et Zhu, Wen-Hong et Ghommam, Jawhar. 2017. « Adaptive control of multiple mobile manipulators transporting a rigid object ». International Journal of Control, Automation and Systems, vol. 15, nº 4. p. 1779-1789.

Gharbi, Ali

Hajej, Zied et Rezg, Nidhal et Gharbi, Ali. 2017. « Ecological optimization for forecasting production and maintenance problem based on carbon tax ». International Journal of Advanced Manufacturing Technology, vol. 88, nº 5. p. 1595-1606.

Hajej, Zied et Rezg, Nidhal et Gharbi, Ali. 2017. « Improved preventive maintenance in the framework of forecasting problem under subcontractor constraint ». International Journal of Production Research, vol. 55, nº 16. p. 4557-4600.

Hajej, Zied et Rezg, Nidhal et Gharbi, Ali. 2017. « Joint optimization of production and maintenance planning with an environmental impact study ». International Journal of Advanced Manufacturing Technology.
(Sous presse)

Hlioui, Rached et Gharbi, Ali et Hajji, Adnene. 2017. « Joint supplier selection, production and replenishment of an unreliable manufacturing-oriented supply chain ». International Journal of Production Economics, vol. 187. p. 53-67.

Ouaret, Samir et Kenné, Jean-Pierre et Gharbi, Ali. 2017. « Production and replacement policies for a deteriorating manufacturing system under random demand and quality ». European Journal of Operational Research.
(Sous presse)

Ouaret, Samir et Kenné, Jean-Pierre et Gharbi, Ali et Polotski, Vladimir. 2017. « Age-dependent production and replacement strategies in failure-prone manufacturing systems ». Proceedings of the Institution of Mechanical Engineers, Part B : Journal of Engineering Manufacture, vol. 231, nº 3. p. 540-554.

Polotski, Vladimir et Kenne, Jean-Pierre et Gharbi, Ali. 2017. « Production and setup policy optimization for hybrid manufacturing–remanufacturing systems ». International Journal of Production Economics, vol. 183, Part B. p. 322-333.

Polotski, Vladimir et Kenne, Jean-Pierre et Gharbi, Ali. 2017. « Set-up and production planning in hybrid manufacturingremanufacturing systems with large returns ». International Journal of Production Research, vol. 55, nº 13. p. 3766-3787.

Gherbi, Abdelouahed

Ahmed, Bali et Gherbi, Abdelouahed et Kazar, Okba. 2017. « Semantic-based approach to context management in ubiquitous environment ». In 8th International Conference on Ambient Systems, Networks and Technologies (ANT) and 7th International Conference on Sustainable Energy Information Technology (SEIT) (Madeira, Portugal, May 16-19, 2017) Coll. « Procedia Computer Science », vol. 109. , p. 592-599. Elsevier B.V..

Bali, Ahmed et Al-Osta, Mahmud et Gherbi, Abdelouahed. 2017. « An ontology-based approach for IoT data processing using semantic rules ». In SDL 2017: Model-Driven Engineering for Future Internet : 18th International SDL Forum, Budapest, Hungary, October 9–11, 2017, Proceedings (Budapest, Hungary, Oct. 09-11, 2017) Coll. « Lecture Notes in Computer Science », vol. 10567. , p. 61-79. Budapest, Hungary : Springer Verlag.

Deschambault, Olivier et Gherbi, Abdelouahed et Légaré, Christian. 2017. « Efficient implementation of the MQTT protocol for embedded systems ». Journal of Information Processing Systems, vol. 13, nº 1. p. 26-39.

Kanso, Ali et Deixionne, Nicolas et Gherbi, Abdelouahed et Moghaddam, Fereydoun Farrahi. 2017. « Enhancing OpenStack fault tolerance for provisioning computing environments ». In 18th IEEE International Symposium on High-Assurance Systems Engineering (HASE) (Singapore, Singapore, Jan. 12-14, 2017), p. 77-83. IEEE Computer Society.

Robati, Tiyam et Gherbi, Abdelouahed et El Kouhen, Amine et Mullins, John. 2017. « Design and simulation of distributed IMA architectures using TTEthernet: a model-driven approach ». Journal of Ambient Intelligence and Humanized Computing, vol. 8, nº 3. p. 345-355.

Wubin, Li et Moghaddam, Fereydoun Farrahi et Heidari, Parisa et Lemieux, Yves et Gherbi, Abdelouahed. 2017. « Facilitating workload aware storage platform by using machine learning technics ». In International Conference on Networking, Architecture and Storage (NAS) (Shenzhen, China, Aug. 07-08, 2017) IEEE.

Glaus, Mathias

Lagnika, S. B. Mondoukpe et Hausler, Robert et Glaus, Mathias. 2017. « Modeling or dynamic simulation: a tool for environmental management in mining? ». Journal of Integrative Environmental Sciences, vol. 14, nº 1. p. 19-37.

Tanguy, Audrey et Villot, Jonathan et Glaus, Mathias et Laforest, Valerie et Hausler, Robert. 2017. « Service area size assessment for evaluating the spatial scale of solid waste recovery chains: A territorial perspective ». Waste Management, vol. 64. p. 386-396.

Vega-Azamar, Ricardo Enrique et Romero-López, Rabindranarth et Oropeza-García, Norma Angélica et Glaus, Mathias et Hausler, Robert et Silva-Poot, Herlinda del Socorro. 2017. « Emergy evaluation of dwelling operation in five housing units of Montreal Island, Canada ». Sustainability, vol. 9, nº 4.

Granger, Éric

Bashbaghi, Saman et Granger, Eric et Sabourin, Robert et Bilodeau, Guillaume-Alexandre. 2017. « Dynamic ensembles of exemplar-SVMs for still-to-video face recognition ». Pattern Recognition, vol. 69. p. 61-81.

Bashbaghi, Saman et Granger, Eric et Sabourin, Robert et Bilodeau, Guillaume-Alexandre. 2017. « Dynamic selection of exemplar-SVMs for watch-list screening through domain adaptation ». In Proceedings of the 6th International Conference on Pattern Recognition Applications and Methods (Porto, Portugal, Feb. 24-26, 2017), p. 738-745. SCITEPRESS.

Bashbaghi, Saman et Granger, Eric et Sabourin, Robert et Bilodeau, Guillaume-Alexandre. 2017. « Robust watch-list screening using dynamic ensembles of SVMs based on multiple face representations ». Machine Vision and Applications, vol. 28, nº 1/2. p. 219-241.

Ekladious, George et Sabourin, Robert et Granger, Eric. 2017. « Learning global-local distance metrics for signature-based biometric cryptosystems ». Cryptography, vol. 1, nº 3. p. 22.

Nourbakhsh, Farshad et Granger, Eric et Fumera, Giorgio. 2017. « An extended sparse classification framework for domain adaptation in video surveillance ». In Computer Vision – ACCV 2016 Workshops : ACCV 2016 International Workshops, Taipei, Taiwan, November 20-24, 2016, Revised Selected Papers, Part III (Taipei, Taiwan, Nov. 20-24, 2016) Coll. « Lecture Notes in Computer Science », vol. 10118. , p. 360-376. Springer Verlag.

Parchami, Mostafa et Bashbaghi, Saman et Granger, Eric. 2017. « Video-based face recognition using ensemble of haar-like deep convolutional neural networks ». In 2017 International Joint Conference on Neural Networks (IJCNN) (Anchorage, AK, USA, May 14-19, 2017), p. 4625-4632. Piscataway, NJ, USA : IEEE.

Guerrouj, Latifa

Azad, Shams et Rigby, Peter C. et Guerrouj, Latifa. 2017. « Generating API call rules from version history and stack overflow posts ». ACM Transactions on Software Engineering and Methodology, vol. 25, nº 4. p. 1-22.

Guerrouj, Latifa et Kermansaravi, Zeinab et Arnaoudouva, Venera et Fung, Benjamin C. M. et Khomh, Foutse et Antoniol, Giuliano et Guéhéneuc, Yann-Gael. 2017. « Investigating the relation between lexical smells and change- and fault-proneness: an empirical study ». Software Quality Journal, vol. 25, nº 3. p. 641-670.

Guilbault, Raynald

Lalonde, Sébastien et Guilbault, Raynald et Langlois, Sébastien. 2017. « Modeling multilayered wire strands, a strategy based on 3D finite element beam-to-beam contacts - Part II: Application to wind-induced vibration and fatigue analysis of overhead conductors ». International Journal of Mechanical Sciences, vol. 126. p. 297-307.

Lalonde, Sébastien et Guilbault, Raynald et Légeron, Frédéric. 2017. « Modeling multilayered wire strands, a strategy based on 3D finite element beam-to-beam contacts - Part I: Model formulation and validation ». International Journal of Mechanical Sciences, vol. 126. p. 281-296.

Guizani, Lotfi

Guizani, Lotfi et Chaallal, Omar et Mousavi, Seyed Sina. 2017. « Local bond stress-slip model for reinforced concrete joints and anchorages with moderate confinement ». Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 44, nº 3. p. 201-211.

Hagemeister, Nicola

Cagnin, A. et Choiniere, M. et Bureau, N. J. et De Polo, L. et Saidi, H. et Hagemeister, N.. 2017. « Self-management, functional status and knee-related quality of life in older adults with mid to late-stage knee osteoarthritis ». [Résumé d'un article de conférence]. Osteoarthritis and Cartilage, vol. 25, nº Suppl. 1. S338-S338.

Clément, Julien et Dumas, Raphaël et Hagemeister, Nicola et de Guise, Jacques A.. 2017. « Can generic knee joint models improve the measurement of osteoarthritic knee kinematics during squatting activity? ». Computer Methods in Biomechanics and Biomedical Engineering, vol. 20, nº 1. p. 94-103.

Mezghani, Neila et Ouakrim, Youssef et Fuentes, Alexandre et Mitiche, Amar et Hagemeister, Nicola et Vendittoli, Pascal-André et de Guise, Jacques A.. 2017. « Mechanical biomarkers of medial compartment knee osteoarthritis diagnosis and severity grading: Discovery phase ». Journal of Biomechanics, vol. 52. p. 106-112.

Zeighami, A. et Dumas, R. et Kanhonou, M. et Hagemeister, N. et Lavoie, F. et de Guise, J. A. et Aissaoui, R.. 2017. « Tibio-femoral joint contact in healthy and osteoarthritic knees during quasi-static squat: A bi-planar X-ray analysis ». Journal of Biomechanics, vol. 53. p. 178-184.

Hallé, Stéphane

Al Sayed, Chady et Vinches, Ludwig et Hallé, Stéphane. 2017. « Designing a prototype of an evaporative cooling garment apt for deep mine activities ». Communication lors de la conférence : First International Scientific Conference and Workshop on Occupational Health and Safety in Formal and Informal Mining (Odense, Denmark, Aug. 22-25, 2017).

Al Sayed, Chady et Vinches, Ludwig et Hallé, Stéphane. 2017. « Validation of a wearable biometric system’s ability to monitor heart rate in two different climate conditions under variable physical activities ». E-Health Telecommunication Systems and Networks, vol. 6, nº 2. p. 19-30.

Couture, C. et Germerie, E. et Debia, M. et Neesham-Grenon, E. et Njanga, P. et Hallé, S. et Lachapelle, G. et Couture, F. et Coulombe, H. et Aubin, S.. 2017. « Qualité de l’air dans les mines souterraines : Évaluation des expositions aux émanations de moteur diesel ». Communication lors de la conférence : 12e Colloque en hygiène du travail de Montréal (Montréal, QC, Canada, 30 mars 2017).

Darveau, J. et Gosselin, S. et Lagrandeur, A. et Nadeau, S. et Hallé, S. et Boudreau-Trudel, B.. 2017. « Étude et conception primaire des tableaux de bord de boulonneuses et foreuses ». Communication lors de la conférence : Le colloque APSM (Malartic, Abitibi, 15 mars 2017).

Debia, Maximilien et Couture, Caroline et Njanga, Pierre-Eric et Neesham-Grenon, Eve et Lachapelle, Guillaume et Coulombe, Hugo et Hallé, Stéphane et Aubin, Simon. 2017. « Diesel engine exhaust exposures in two underground mines ». International Journal of Mining Science and Technology, vol. 27, nº 4. p. 641-645.

Vinches, L. et Zemzem, M. et Hallé, S.. 2017. « Effects of sweat and 3D-deformation on the mechanical behaviour of nitrile rubber gloves ». Progress in Rubber, Plastics and Recycling Technology, vol. 33, nº 4. p. 203-220.

Vinches, Ludwig et Hallé, Stéphane. 2017. « L’exposition aux nanomatériaux : comment se protéger efficacement la peau ? ». Communication lors de la conférence : 39e Congrès Annuel de l'AQHSST : Prévenir au Quotidien, Nouveaux Enjeux, Nouveaux Défis! (Victoriaville, QC, Canada, 16-18 mai, 2017).

Vinches, Ludwig et Hallé, Stéphane. 2017. « Toxicité de la cellulose nanométrique : des incertitudes persistent ». Bulletin de Veille Scientifique, nº 31. p. 13-15.

Vinches, Ludwig et Zemzem, Mohamed et Hallé, Stéphane et Peyrot, Caroline et Wilkinson, Kevin J. et Tufenkji, Nathalie. 2017. « An improved experimental methodology to evaluate the effectiveness of protective gloves against nanoparticles in suspension ». Journal of Occupational and Environmental Hygiene, vol. 14, nº 7. D95-D101.

Zemzem, Mohamed et Vinches, Ludwig et Hallé, Stéphane. 2017. « Sorption and diffusion of gold and silver nanoparticles in solution through nitrile rubber membrane ». Journal of Applied Polymer Science, vol. 134, nº 39.

Zemzem, Mohamed et Vinches, Ludwing et Hallé, Stéphane. 2017. « Diffusion of nanoparticles in solution through elastomeric membrane ». In Applied Nanotechnology and Nanoscience International Conference 2016 (ANNIC) (Barcelona, Spain, Nov. 09-11, 2016) Coll. « Journal of Physics: Conference Series », vol. 829. IOP Publishing.

Hausler, Robert

Lagnika, S. B. Mondoukpe et Hausler, Robert et Glaus, Mathias. 2017. « Modeling or dynamic simulation: a tool for environmental management in mining? ». Journal of Integrative Environmental Sciences, vol. 14, nº 1. p. 19-37.

Tanguy, Audrey et Villot, Jonathan et Glaus, Mathias et Laforest, Valerie et Hausler, Robert. 2017. « Service area size assessment for evaluating the spatial scale of solid waste recovery chains: A territorial perspective ». Waste Management, vol. 64. p. 386-396.

Vega-Azamar, Ricardo Enrique et Romero-López, Rabindranarth et Oropeza-García, Norma Angélica et Glaus, Mathias et Hausler, Robert et Silva-Poot, Herlinda del Socorro. 2017. « Emergy evaluation of dwelling operation in five housing units of Montreal Island, Canada ». Sustainability, vol. 9, nº 4.

Jahazi, Mohammad

Aidibe, Ali et Nejad, Mojtaba Kamali et Tahan, Antoine et Jahazi, Mohammad et Cloutier, Sylvain G.. 2017. « Surface characterization of die inserts used for LED lamp plastic lenses ». International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12. p. 3395-3403.

Aranas, Clodualdo et Foul, Anes et Guo, Baoqi et Fall, Ameth et Jahazi, Mohammad et Jonas, John J.. 2017. « Determination of the critical stress for the initiation of dynamic transformation in commercially pure titanium ». Scripta Materialia, vol. 133. p. 83-85.

Bonakdar, Ali et Molavi-Zarandi, Marjan et Chamanfar, Ahmad et Jahazi, Mohammad et Firoozrai, Arash et Morin, Eric. 2017. « Finite element modeling of the electron beam welding of Inconel-713LC gas turbine blades ». Journal of Manufacturing Processes, vol. 26. p. 339-354.

Chadha, K. et Shahriari, D. et Tremblay, R. et Bhattacharjee, P. P. et Jahazi, M.. 2017. « Deformation and recrystallization behavior of the cast structurein large size, high strength steel ingots: Experimentation and modeling ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 48, nº 9. p. 4297-4313.

Chamanfar, Ahmad et Monajati, Hossein et Rosenbaum, Alex et Jahazi, Mohammad et Bonakdar, Ali et Morin, Eric. 2017. « Microstructure and mechanical properties of surface and subsurface layers in broached and shot-peened Inconel-718 gas turbine disc fir-trees ». Materials Characterization, vol. 132. p. 53-68.

Chentouf, S. M. et Belhadj, T. et Bombardier, N. et Brodusch, N. et Gauvin, R. et Jahazi, M.. 2017. « Influence of predeformation on microstructure evolution of superplastically formed Al 5083 alloy ». International Journal of Advanced Manufacturing Technology, vol. 88, nº 9. p. 2929-2937.

Dupont-Marillia, Frederic et Jahazi, Mohammad et Lafreniere, Serge et Bélanger, Pierre. 2017. « Influence of local mechanical properties of high strength steel from large size forged ingot on ultrasonic wave velocities ». In 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation (Atlanta, GA, USA, July 17-22, 2016) Coll. « AIP Conference Proceedings », vol. 1806. USA : American Institute of Physics.

Fall, A. et Jahazi, M. et Khodabandeh, A. R. et Fesharakib, M. H.. 2017. « Effect of process parameters on microstructure and mechanical properties of friction stir-welded Ti-6Al-4V joints ». International Journal of Advanced Manufacturing Technology, vol. 91, nº 5-8. p. 2919-2931.

Fredj, Emna Ben et Nanesa, Hadi Ghasemi et Shahriari, Davood et Morin, Jean-Benoit et Jahazi, Mohammad. 2017. « Effect of cooling rate on phase transformation and microstructure evolution in a large size forged ingot of medium carbon low alloy steel ». In TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings (San Diego, CA, USA, Feb. 26-March 2, 2017) Coll. « The Minerals, Metals & Materials Series ». , p. 413-423. Springer International Publishing.

Ghasemi-Nanesa, Hadi et Jahazi, Mohammad et Heidari, Majid et Levasseur, Tom. 2017. « The influence of deformation-induced microvoids on mechanical failure of AISI A8-Mod martensitic tool steel ». In 20th International ESAFORM Conference on Material Forming (ESAFORM) (Dublin, Ireland, Apr. 26-28, 2017) Coll. « AIP Conference Proceedings », vol. 1896. USA : American Institute of Physics.

Harris, Nathan et Shahriari, Davood et Jahazi, Mohammad. 2017. « Development of a fast converging material specific void closure model during ingot forging ». Journal of Manufacturing Processes, vol. 26. p. 131-141.

Hesamodin Talebi, S. et Ghasemi-Nanesa, Hadi et Jahazi, Mohammad et Melkonyan, Haikouhi. 2017. « In situ study of phase transformations during non-isothermal tempering of bainitic and martensitic microstructures ». Metals, vol. 7, nº 9.

Jonas, John J. et Aranas, Clodualdo et Fall, Ameth et Jahazi, Mohammad. 2017. « Transformation softening in three titanium alloys ». Materials & Design, vol. 113. p. 305-310.

Loucif, Abdelhalim et Shahriari, Davood et Zhang, Chunping P. et Jahazi, Mohammad et Lapierre-Boire, Louis-Philippe et Tremblay, Rami. 2017. « Macrosegregation of alloying elements in hot top of large size high strength steel ingot ». In International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) Coll. « Materials Science Forum », vol. 879. , p. 1176-1181. Trans Tech Publications.

Majidi, Omid et Jahazi, Mohammad et Bombardier, Nicolas et Samuel, Ehab. 2017. « Variation of strain rate sensitivity index of a superplastic aluminum alloy in different testing methods ». In 20th International ESAFORM Conference on Material Forming (ESAFORM) (Dublin, Ireland, Apr. 26-28, 2017) Coll. « AIP Conference Proceedings », vol. 1896. USA : American Institute of Physics.

Masoumi, F. et Shahriari, D. et Jahazi, M. et Cormier, J. et Flipo, B. C. D.. 2017. « On the occurrence of liquation during linear friction welding of Ni-based superalloys ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 48A, nº 6. p. 2886-2899.

Mostafa, Ahmad et Rubio, Ignacio Picazo et Brailovski, Vladimir et Jahazi, Mohammad et Medraj, Mamoun. 2017. « Structure, texture and phases in 3D printed IN718 alloy subjected to homogenization and HIP treatments ». Metals, vol. 7, nº 6.

Saadati, Mohammad et Azari Khosroshahi, Rasoul et Ebrahimi, Golamreza et Jahazi, Mohammad. 2017. « Twin-assisted precipitation during hot compression of an Mg-Gd-Zn-Zr magnesium alloy ». Materials Science and Engineering A, vol. 706. p. 142-152.

Saadati, Mohammad et Khosroshahi, Rasoul Azari et Ebrahimi, Gholamreza et Jahazi, Mohammad. 2017. « Formation of precipitates in parallel arrays on LPSO structures during hot deformation of GZ41K magnesium alloy ». Materials Characterization, vol. 131. p. 234-243.

Sun, Binhan et Vanderesse, Nicolas et Fazeli, Fateh et Scott, Colin et Chen, Jianqiang et Bocher, Philippe et Jahazi, Mohammad et Yue, Stephen. 2017. « Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel ». Scripta Materialia, vol. 133. p. 9-13.

Tongne, Amèvi et Desrayaud, Christophe et Jahazi, Mohammad et Feulvarch, Eric. 2017. « On material flow in friction stir welded al alloys ». Journal of Materials Processing Technology, vol. 239. p. 284-296.

Touazine, Heithem et Akab, Jordan et Jahazi, Mohammad et Tahan, Antoine et Jomaa, Walid et Bocher, Philippe. 2017. « Modeling of the microstructure alteration induced by hard turning of Inconel 718 ». International Journal of Advanced Manufacturing Technology.
(Sous presse)

Touazine, Heithem et Jahazi, Mohammad et Bocher, Philippe. 2017. « Accurate determination of damaged subsurface layers in machined Inconel 718 ». International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12. p. 3419-3427.

Zhang, Chunping P. et Shahriari, Davood et Loucif, Abdelhalim et Jahazi, Mohammad et Lapierre-Boire, Louis-Philippe et Tremblay, Rami. 2017. « Effect of segregated alloying elements on the high strength steel properties: Application to the large size ingot casting simulation ». In TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings (San Diego, CA, USA, Feb. 26-Mar. 02, 2017) Coll. « Minerals Metals & Materials Series ». , p. 491-500. Springer International Publishing.

Joncas, Simon

Cormier, Laurent et Joncas, Simon. 2017. « Modelling the effect of temperature on the probabilistic stress–life fatigue diagram of glass fibre–polymer composites loaded in tension along the fibre direction ». Journal of Composite Materials.
(Sous presse)

Cormier, Laurent et Joncas, Simon. 2017. « Modelling the storage modulus, transition temperatures and timetemperature superposition characteristics of epoxies and their composites ». Journal of Thermal Analysis and Calorimetry.
(Sous presse)

Michaud, François et Dalir, Hamid et Joncas, Simon. 2017. « Structural design and optimisation of an aircraft morphing wing : composite skin ». Journal of Aircraft.
(Sous presse)

Pappas, Georgios et Joncas, Simon et Michaud, Véronique et Botsis, John. 2017. « The influence of through-thickness reinforcement geometry and pattern on delamination of fiber-reinforced composites: Part II – Modeling ». Composite Structures, vol. 181. p. 379-390.

Zhang, Hai et Fernandes, Henrique et Hassler, Ulf et Ibarra-Castanedo, Clemente et Genest, Marc et Robitaille, François et Joncas, Simon et Maldague, Xavier. 2017. « Comparative study of microlaser excitation thermography and microultrasonic excitation thermography on submillimeter porosity in carbon fiber reinforced polymer composites ». Optical Engineering, vol. 56, nº 4.

Kaddoum, Georges

Baek, Jung-Yeon et Hong, Een-Kee et Kaddoum, Georges. 2017. « A study on channel estimation algorithm with sounding reference signal for TDD downlink scheduling ». In IEEE 28th International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) (Montreal, QC, Canada, Oct. 8-13, 2017)
(Sous presse)

Dawa, Mohamed et Kaddoum, Georges et Sattar, Zeeshan. 2017. « A generalized lower bound on the Bit-Error-Rate of DCSK Systems over multi-path rayleigh fading channels ». IEEE Transactions on Circuits and Systems II: Express Briefs.
(Sous presse)

Eshteiwi, Khaled et Gagnon, François et Kaddoum, Georges et Ben Fredj, Kais. 2017. « Performance analysis of peer-to-peer V2V wireless communications in the presence of interference ». In IEEE 28th International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) (Montreal, QC, Canada, Oct. 8-13, 2017)
(Sous presse)

Galluscio, Mario et Neshenko, Nataliia et Bou-Hard, Elias et Huang, Yongliang et Ghani, Nasir et Crichigno, Jorge et Kaddoum, Georges. 2017. « A first empirical look on internet-scale exploitations of IoT devices ». In IEEE 28th International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) (Montreal, QC, Canada, Oct. 8-13, 2017)
(Sous presse)

Herceg, Marijan et Kaddoum, Georges et Vranjes, Denis et Soujeri, Ebrahim. 2017. « Permutation Index DCSK modulation technique for secure multi-user high-data-rate communication systems ». IEEE Transactions on Vehicular Technology.
(Sous presse)

Iran, Hung et Kaddoum, Georges et Gagnon, François et Sibomana, Louis. 2017. « Cognitive radio network with secrecy and interference constraints ». Physical Communication, vol. 22. p. 32-41.

Kaddoum, Georges et Tadayon, Navid. 2017. « Differential chaos shift keying: A robust modulation scheme for power-line communications ». IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 64, nº 1. p. 31-35.

Kaddoum, Georges et Tran, Ha-Vu et Kong, Long et Atallah, Micheal. 2017. « Design of simultaneous wireless information and power transfer scheme for short reference DCSK communication systems ». IEEE Transactions on Communications, vol. 65, nº 1. p. 431-443.

Kaushal, Hemani et Kaddoum, Georges. 2017. « Applications of lasers for tactical military operations ». IEEE Access, vol. 5. p. 20736-20753.

Kaushal, Hemani et Kaddoum, Georges. 2017. « Optical communication in space: Challenges and mitigation techniques ». IEEE Communications Surveys & Tutorials, vol. 19, nº 1. p. 57-96.

Kaushal, Hemani et Kaddoum, Georges et Jain, ViranderKumar et Kar, Subrat. 2017. « Experimental investigation of optimum beam size for FSO uplink ». Optics Communications, vol. 400. p. 106-114.

Nijsure, Yogesh et Kaddoum, Georges et Ghodoosipour, Golnaz et Cai, Guofa et Wang, Lin. 2017. « A novel spectrum sensing mechanism based on distribution discontinuity estimation within cognitive radio ». In 84th IEEE Vehicular Technology Conference (VTC-Fall) (Montreal, QC, Canada, Sept. 18-21, 2016) IEEE.

Quach, Truong Xuan et Tran, Hung et Uhlemann, Elisabeth et Kaddoum, Georges et Tran, Quang Anh. 2017. « Power allocation policy and performance analysis of secure and reliable communication in cognitive radio networks ». Wireless Networks.
(Sous presse)

Sattar, Zeeshan et de Carvalho Evangelista, Joao Victor et Kaddoum, Georges et Batani, Naïm. 2017. « Analysis of the cell association for decoupled wireless access in a two tier network ». In IEEE 28th International Symposium on Personal, Indoor and Mobile Radio Communications (PIMRC) (Montreal, QC, Canada, Oct. 8-13, 2017)
(Sous presse)

Soujeri, Ebrahim et Kaddoum, Georges et Au, Minh et Herceg, Marijan. 2017. « Frequency index modulation for low complexity low energy communication networks ». IEEE Access, vol. 5. p. 23276-23287.

Tolossa, Yohannes Jote et Vuppala, Satyanarayana et Kaddoum, Georges et Abreu, Giuseppe. 2017. « On the uplink secrecy capacity analysis in D2D-enabled cellular network ». IEEE Systems Journal.

Tran, Ha-Vu et Kaddoum, Georges et Tran, Hung et Hong, Een Kee. 2017. « Downlink power optimization for heterogeneous networks with time reversal-based transmission under backhaul limitation ». IEEE Access, vol. 5. p. 755-770.

Vu, Dung et Kaddoum, Georges. 2017. « A waste city management system for smart cities applications ». In Advances in Wireless and Optical Communications (RTUWO) (Riga, Latvia, Nov. 2-3, 2017)
(Sous presse)

Kadoch, Michel

Abuashour, Ahmad et Kadoch, Michel. 2017. « Performance improvement of cluster-based routing protocol in VANET ». IEEE Access, vol. 5. p. 15354-15371.

Astudillo, Gabriel et Kadoch, Michel. 2017. « Neighbor discovery and routing schemes for mobile ad-hoc networks with beamwidth adaptive smart antennas ». Telecommunication Systems, vol. 66, nº 1. p. 17-27.

Benmimoune, Abderrahmane et Kadoch, Michel. 2017. « Relay technology for 5G networks and IoT applications ». In Internet of Things: Novel Advances and Envisioned Applications. Coll. « Studies in big data », vol. 25. p. 3-26. Springer.

BenMimoune, Abderrahmane et Khasawneh, Fawaz A. et Rong, Bo et Kadoch, Michel. 2017. « Dynamic joint resource allocation and relay selection for 5G multi-hop relay systems ». Telecommunication Systems, vol. 66, nº 2. p. 283-294.

BenMimoune, Abderrahmane et Khazawneh, Fawaz A. et Kadoch, Michel. 2017. « User association-based joint admission and power control for heterogeneous wireless networks ». Wireless Personal Communications, vol. 96, nº 2. p. 2485-2502.

Chen, Na et Rong, Bo et Zhang, Xinran et Kadoch, Michel. 2017. « Scalable and flexible massive mimo precoding for 5G H-CRAN ». IEEE Wireless Communications, vol. 24, nº 1. p. 46-52.

Hayajna, Tareq et Kadoch, Michel. 2017. « Analysis and enhancements of HELLO based link failure detection in wireless mesh networks ». Telecommunication Systems.
(Sous presse)

Hayajna, Tareq et Kadoch, Michel. 2017. « Ensuring two routes connectivity in mobile ad hoc networks with Random Waypoint mobility ». In 2017 IFIP/IEEE International Symposium on Integrated Network and Service Management (IM) (Lisbon, Portugal, May 08-12, 2017), p. 636-639. IEEE.

Khasawneh, Fawaz A. et Kadoch, Michel. 2017. « Adaptive Transmission Rate Congestion Aware Routing Algorithm in Wireless Mesh Network ». Wireless Personal Communications.
(Sous presse)

Khasawneh, Samer et Kadoch, Michel. 2017. « Hybrid cryptography algorithm with precomputation for advanced metering infrastructure networks ». Mobile Networks and Applications.
(Sous presse)

Omran, Allafi et Benmimoune, Abderrahmane et Kadoch, Michel. 2017. « Mobility management for D4D in HetNet ». In Canadian Conference on Electrical and Computer Engineering (CCECE) (Windsor, ON, Canada, Apr. 30-May 03, 2017) IEEE.

Xiao, Ke et Wang, Fenghe et Rutagemwa, Humphrey et Kadoch, Michel et Rong, Bo. 2017. « High-performance multicast services in 5G big data network with massive MIMO ». In IEEE International Conference on Communications (ICC) (Paris, France, May 21-25, 2017) IEEE.

Kajl, Stanislaw

Rousseau, Clément et Fannou, Jean-Louis Comlan et Lamarche, Louis et Kajl, Stanislaw. 2017. « Modeling and experimental validation of a transient direct expansion heat pump ». International Journal of Renewable Energy Development, vol. 6, nº 2. p. 145-155.

Kara, Nadjia

Abdel-Baki, Amal et Lal, Shalini et Charron, Olivier D. et Stip, Emmanuel et Kara, Nadjia. 2017. « Understanding access and use of technology among youth with first-episode psychosis to inform the development of technology-enabled therapeutic interventions ». Early Intervention in Psychiatry, vol. 11, nº 1. p. 72-76.
Compte des citations dans Scopus : 2.

Tout, Hanine et Talhi, Chamseddine et Kara, Nadjia et Mourad, Azzam. 2017. « Smart mobile computation offloading: Centralized selective and multi-objective approach ». Expert Systems with Applications.
(Sous presse)

Katsanis, Constantine J.

Alhosani, Yousif I. et Katsanis, Constantine J. et Alkass, Sabah. 2017. « Predicting firm performance and the role of top management team (TMT): A fuzzy inference approach ». International Journal of Innovation, Management and Technology, vol. 8, nº 2. p. 144-150.

Kenné, Jean-Pierre

Ouaret, Samir et Kenné, Jean-Pierre et Gharbi, Ali. 2017. « Production and replacement policies for a deteriorating manufacturing system under random demand and quality ». European Journal of Operational Research.
(Sous presse)

Ouaret, Samir et Kenné, Jean-Pierre et Gharbi, Ali et Polotski, Vladimir. 2017. « Age-dependent production and replacement strategies in failure-prone manufacturing systems ». Proceedings of the Institution of Mechanical Engineers, Part B : Journal of Engineering Manufacture, vol. 231, nº 3. p. 540-554.

Polotski, Vladimir et Kenne, Jean-Pierre et Gharbi, Ali. 2017. « Production and setup policy optimization for hybrid manufacturing–remanufacturing systems ». International Journal of Production Economics, vol. 183, Part B. p. 322-333.

Polotski, Vladimir et Kenne, Jean-Pierre et Gharbi, Ali. 2017. « Set-up and production planning in hybrid manufacturingremanufacturing systems with large returns ». International Journal of Production Research, vol. 55, nº 13. p. 3766-3787.

Shaer, B. et Kenné, J. P. et Kaddissi, C. et Mintsa, H. A.. 2017. « Real-time hybrid control of electrohydraulic active suspension ». International Journal of Robust and Nonlinear Control.
(Sous presse)

Khaled, Amar

Belleau, Jean-François et Khaled, Amar et Nollet, Marie-Josée. 14 Février 2017. « Parametric Study of the Seismic Response of Bridges ». [Research Paper Introduction]. Substance ÉTS.

Belleau, Jean-François et Khaled, Amar et Nollet, Marie-Josée. 14 Février 2017. « Étude paramétrique de la réponse sismique des ponts ». [Research Paper Introduction]. Substance ÉTS.

Kouki, Ammar B.

Amar, Achraf Ben et Cao, Hung et Kouki, Ammar B.. 2017. « Modeling and process design optimization of a piezoelectric micromachined ultrasonic transducers (PMUT) using lumped elements parameters ». Microsystem Technologies, vol. 23, nº 10. p. 4659-4669.

Amor, Houssem Eddine et Kouki, Ammar B. et Marsh, Paul et Kim, Kyoung Tae et Cao, Hung. 2017. « Development of a novel miniaturized LTCC-based wireless pH sensing system ». In 2016 IEEE Sensors (Orlando, FL, USA, Oct. 30-Nov. 02, 2016) IEEE.

Atikian, Haig A. et Latawiec, Pawel et Burek, Michael J. et Sohn, Young-Ik et Meesala, Srujan et Gravel, Normand et Kouki, Ammar B. et Lončar, Marko. 2017. « Freestanding nanostructures via reactive ion beam angled etching ». APL Photonics, vol. 2, nº 5.

Isapour, Aria et Kouki, Ammar B.. 2017. « Empty LTCC integrated waveguide with compact transitions for ultra-low loss millimeter-wave applications ». IEEE Microwave and Wireless Components Letters, vol. 27, nº 2. p. 144-146.

Jarndal, Anwar et Kouki, Ammar. 2017. « Efficient modeling of GaN HEMTs for linear and nonlinear circuits design ». International Journal of Numerical Modelling: Electronic Networks, Devices and Fields, vol. 30, nº 1.

Jemai, Mohamed et Kouki, Ammar B.. 2017. « New adaptive multi-expansion frequencies approach for SP-MORe techniques with application to the well-conditioned asymptotic waveform evaluation ». IEEE Transactions on Microwave Theory and Techniques, vol. 65, nº 10. p. 3709-3719.

Moghadam, Hadidian Hossein et Foudazi, Ali et Kouki, Ammar B.. 2017. « A comparison of satellite signal simulation in street canyon in 2D and 3D deterministic methods ». In IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting (San Diego, CA, USA, July 09-14, 2017), p. 599-600. Piscataway, NJ, USA : IEEE.

Tounsi, Farès et Said, Mohamed Hadj et Kouki, Ammar B. et Mezghani, Brahim. 2017. « AC actuation contribution to the induced electromotive force in the miniaturized inductive planar microphone ». Analog Integrated Circuits and Signal Processing, vol. 90, nº 3. p. 551-562.

Kpodjedo, Sègla Jean-Luc

Galinier, Philippe et Kpodjedo, Segla et Antoniol, Giulio. 2017. « A penalty-based Tabu search for constrained covering arrays ». In Genetic and Evolutionary Computation Conference (GECCO) (Berlin, Germany, July 15-19, 2017), p. 1288-1294. ACM.

Labbé, David

Charbonneau, Philippe et Dallaire-Côté, Mikael et Saint-Pierre Côté, Sara et Labbe, David R. et Mezghani, Neila et Shahnewaz, Sharif et Arafat, Imtiaz et Irfan, Tanvir et Samaraweera, Gayani et Quarles, John. 2017. « Gaitzilla: exploring the effect of embodying a giant monster on lower limb kinematics and time perception ». In International Conference on Virtual Rehabilitation (ICVR) (Montreal, QC, Canada, June 19-22, 2017) Piscataway, NJ, USA : IEEE.

Gagnon Shaigetz, Vincent et Labbé, David R. et Aissaoui, Rachid. 2017. « Does navigating in a virtual environment while using a haptic wheelchair simulator lead to a more natural propulsion? ». In International Conference on Virtual Rehabilitation (ICVR) (Montreal, QC, Canada, June 19-22, 2017) Piscataway, NJ, USA : IEEE.

Saint-Pierre Côté, S. et Charbonneau, P. et Aissaoui, R. et Nadeau, S. et Duclos, C. et Mezghani, N. et Labbe, D. R.. 2017. « Effect of local modulation of a real-time self-avatar on 3D gait kinematics during natural walking on a treadmill ». In International Conference on Virtual Rehabilitation (ICVR) (Montréal, Qc, Canada, June 19-22, 2017) Piscataway, NJ, USA : IEEE.

Lamarche, Louis

Lamarche, Louis. 2017. « G-function generation using a piecewise-linear profile applied to ground heat exchangers ». International Journal of Heat and Mass Transfer, vol. 115, nº Part. B. p. 354-360.

Lamarche, Louis. 2017. « Mixed arrangement of multiple input-output borehole systems ». Applied Thermal Engineering, vol. 124. p. 466-476.

Paradis, Pierre-Luc et Rousse, Daniel R. et Lamarche, Louis et Nesreddine, Hakim. 2017. « A 2-D transient numerical heat transfer model of the solar absorber plate to improve PV/T solar collector systems ». Solar Energy, vol. 153. p. 366-378.

Rousseau, Clément et Fannou, Jean-Louis Comlan et Lamarche, Louis et Kajl, Stanislaw. 2017. « Modeling and experimental validation of a transient direct expansion heat pump ». International Journal of Renewable Energy Development, vol. 6, nº 2. p. 145-155.

Lameiras Koerich, Alessandro

Pontes, Jhony K. et Fookes, Clinton et Britto Jr, Alceu et L. Koerich, Alessandro. 2017. « Two-stage facial age prediction using group-specific features ». In 42nd IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) (New Orleans, LA, USA, Mar. 05-09, 2017), p. 2577-2581. IEEE.

Silva, Eunelson J. et Britto, Alceu S. et Oliveira, Luiz S. et Enembreck, Fabricio et Sabourin, Robert et Koerich, Alessandro L.. 2017. « A two-step cascade classification method ». In 2017 International Joint Conference on Neural Networks (IJCNN) (Anchorage, AK, USA, May 14-19, 2017), p. 573-580. Piscataway, NJ, USA : IEEE.

Landry, René Jr

Amrhar, Abdessamad et Kisomi, Alireza Avakh et Zhang, Eric et Zambrano, Joe et Thibeault, Claude et Landry, René Jr.. 2017. « Multi-mode reconfigurable software defined radio architecture for avionic radios ». In Integrated Communications, Navigation and Surveillance Conference (ICNS) (Herndon, VA, USA, Apr. 18-20, 2017), 2D1/1-2D1/10. Piscataway, NJ, USA : IEEE.

Anh-Quang, Nguyen et Kisomi, Alireza Avakh et Amrhar, Abdessamad et Landry, René J.. 2017. « CFO tracking for direct RF sampling architecture applied to VHF avionic radios ». In Integrated Communications, Navigation and Surveillance Conference (ICNS) (Herndon, VA, USA, Apr. 18-20, 2017), p. 2-3. Piscataway, NJ, USA : IEEE.

Derbel, Oussama et Landry, René Jr.. 2017. « Driver behavior assessment in case of critical driving situations ». IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences, vol. E100A, nº 2. p. 491-498.

Elgamoudi, Abulasad et Shahzad, Aamir et Landry, René Jr. 2017. « Contribution to develop a generic hybrid technique of satellite system for RFI geolocation ». In 14th International Bhurban Conference on Applied Sciences and Technology (IBCAST) (Islamabad, Pakistan, Jan. 10-14, 2017), p. 764-771. IEEE.

Goudarzi, Mohammad Ali et Landry, René Jr. 2017. « Assessing horizontal positional accuracy of Google Earth imagery in the city of Montreal, Canada ». Geodesy and Cartography, vol. 43, nº 2. p. 56-65.

Nguyen, Anh-Quang et Kisomi, Alireza Avakh et Landry, René Jr.. 2017. « New architecture of Direct RF Sampling for avionic systems applied to VOR and ILS ». In IEEE Radar Conference (RadarConf) (Seattle, WA, USA, May 08-12, 2017), p. 1622-1627. IEEE.

Zhang, Eric et Zambrano, Joe et Amrhar, Abdessamad et Landry, René Jr. et Ajib, Wessam. 2017. « Design and implementation of a wideband radio using SDR for avionic applications ». In Integrated Communications, Navigation and Surveillance Conference (ICNS) (Herndon, VA, USA, Apr. 18-20, 2017) Piscataway, NJ, USA : IEEE.

Zhang, Eric et Zambrano, Joe et Landry, René Jr. et Ajib, Wessam. 2017. « Design and implementation of a wideband radio using SDR for avionic applications ». Communication lors de la conférence : 17th Integrated Communications, Navigation and Surveillance Systems Conference (ICNS) (Herndon, VA, USA, Apr. 18-20, 2017).

Lapalme, James

Forgues, Daniel et Lapalme, James. 2017. « Research issues in attempting to support an architecture firm transition from fragmented CAD to BIM collaborative design ». In Cooperative Design, Visualization, and Engineering : 14th International Conference, CDVE 2017, Mallorca, Spain, September 17-20, 2017, Proceedings (Mallorca, Spain, Sept. 17-20, 2017) Coll. « Lecture Notes in Computer Science », vol. 10451. , p. 185-192. Springer.

Lapalme, James. 2017. « Organizations (and organizing) are a technology that humans know very little about ». Organizational Design and Enterprise Engineering.
(Sous presse)

Vallerand, Jonathan et Lapalme, James et Moise, Alexandre. 2017. « Analysing enterprise architecture maturity models: a learning perspective ». Enterprise Information Systems, vol. 11, nº 6. p. 859-883.

Laporte, Catherine

Dahmani, Jawad et Petit, Yvan et Laporte, Catherine. 2017. « Model-based correction of ultrasound image deformations due to probe pressure ». In Medical Imaging 2017: Image Processing (Orlando, FL, USA, Feb. 11-16, 2017) Coll. « Proceedings of SPIE », vol. 10133. SPIE.

Gueziri, Houssem-Eddine et Tremblay, Sebastien et Laporte, Catherine et Brooks, Rupert. 2017. « Graph-based 3D-ultrasound reconstruction of the liver in the presence of respiratory motion ». In Reconstruction, Segmentation, and Analysis of Medical Images : First International Workshops, RAMBO 2016 and HVSMR 2016, Held in Conjunction with MICCAI 2016, Athens, Greece, October 17, 2016, Revised Selected Papers (Athens, Greece, Oct. 17-21, 2016) Coll. « Lecture Notes in Computer Science », vol. 10129. , p. 48-57. Springer Verlag.

Jayanthi, Sai Muralidhar et Ménard, Lucie et Laporte, Catherine. 2017. « Divide-and-warp temporal alignment of speech signals between speakers: Validation using articulatory data ». In IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) (New Orleans, LA, USA, Mar. 05-09, 2017), p. 5465-5469. IEEE.

Laporte, Claude Y.

Laporte, Claude Y. et April, Alain. 2017. « Software quality assurance ». Wiley-IEEE Computer Society Press. 624 p.

Laporte, Claude Y. et Muñoz, Mirna et Gerancon, Bruel. 2017. « The education of students about ISO/IEC 29110 software engineering standards and their implementations in very small entities ». In IEEE Canada International Humanitarian Technology Conference (IHTC) (Toronto, ON, Canada, July 21-22, 2017), p. 94-98. Piscataway, NJ, USA : IEEE.

Laporte, Claude Y. et O'Connor, Rory V.. 2017. « Software process improvement standards and guides for very small organizations an overview of eight implementations ». CrossTalk, vol. 30, nº 3. p. 23-27.

Laporte, Claude Y. et Tremblay, Nicolas et Menaceur, Jamil et Poliquin, Denis et Houde, Ronald. 2017. « Systems engineering and management processes for small organizations with ISO/IEC 29110: An implementation in a small public transportation company ». In 2017 Annual IEEE International Systems Conference (SysCon) (Montreal, QC, Canada, Apr. 24-27, 2017) IEEE.

Plante, Francis et Laporte, Claude Y.. 2017. « Développement et mise en oeuvre d'un processus de type agile-ISO 29110 au sein d'une grande institution financière Canadienne ». Génie Logiciel, nº 120. p. 37-45.

Rory, V. O'Connor et Claude, Y. Laporte. 2017. « The evolution of the ISO/IEC 29110 set of standards and guides ». International Journal of Information Technologies and Systems Approach (IJITSA), vol. 10, nº 1. p. 1-21.

Laville, Frédéric

Gaudreau, Marc-André et Sgard, Franck et Laville, Frédéric et Nélisse, Hugues. 2017. « A finite element model to improve noise reduction based attenuation measurement of earmuffs in a directional sound field ». Applied Acoustics, vol. 119. p. 66-77.

Padois, Thomas et Gaudreau, Marc-André et Doutres, Olivier et Sgard, Franck C. et Berry, Alain et Marcotte, Pierre et Laville, Frédéric. 2017. « Comparison of time domain noise source localization techniques: Application to impulsive noise of nail guns ». [Résumé d'un article de conférence]. Journal of the Acoustical Society of America, vol. 141, nº 5. p. 3750.

Thomas, Marc et Laville, Frédéric. 2017. « Simulation des vibrations mécaniques par Matlab, Simulink et Ansys ». 2e édition. Québec ; Montréal : Presses de l'Université du Québec ; École de technologie supérieure. 700 p.

Valentin, Olivier et John, Sasha M. et Laville, Frédéric. 2017. « Using auditory steady-state responses for measuring hearing protector attenuation ». Noise and Health, vol. 19, nº 86. p. 1-9.

Lemaire, Romain

Hospital, A. et Lemaire, R.. 2017. « Simultaneous detection and partition between soot and PAHs in a laminar flame of methane by Single-Excitation Wavelength TIme-REsolved Laser-Induced Incandescence and Fluorescence (SEW-TIRE-LII/LIF) ». In Combustion Institute Canadian Section (CI/CS) : Spring Technical Meeting (Montreal, QC, Canada, May 15-18, 2017)

Lapalme, Denis et Lemaire, Romain et Seers, Patrice. 2017. « Assessment of the method for calculating the Lewis number of H2/CO/CH4 mixtures and comparison with experimental results ». International Journal of Hydrogen Energy, vol. 42, nº 12. p. 8314-8328.

Lemaire, R. et Menanteau, S.. 2017. « Assessment of radiation correction methods for bare bead thermocouples in a combustion environment ». International Journal of Thermal Sciences, vol. 122. p. 186-200.

Lemaire, Romain et Menage, Delphine et Seers, Patrice. 2017. « Study of the high heating rate devolatilization of bituminous and subbituminous coals-Comparison of experimentally monitored devolatilization profiles with predictions issued from single rate, two-competing rate, distributed activation energy and chemical percolation devolatilization models ». Journal of Analytical and Applied Pyrolysis, vol. 123. p. 255-268.

Lepage, Richard

Sghaier, Moslem Ouled et Foucher, Samuel et Lepage, Richard. 2017. « River extraction from high-resolution sar images combining a structural feature set and mathematical morphology ». IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, vol. 10, nº 3. p. 1025-1038.

Sghaier, Moslem Ouled et Hammami, Imen et Foucher, Samuel et Lepage, Richard. 2017. « Stroke width transform for linear structure detection: Application to river and road extraction from high-resolution satellite images ». In 14th International Conference on Image Analysis and Recognition, ICIAR 2017, July 5, 2017 - July 7, 2017 (Montreal, QC, Canada, July 05-07, 2017) Coll. « Lecture Notes in Computer Science », vol. 10317. , p. 605-613. Springer Verlag.

Lerouge, Sophie

Bertrand-Grenier, Antony et Lerouge, Sophie et Tang, An et Salloum, Eli et Therasse, Eric et Kauffmann, Claude et Héon, Hélène et Salazkin, Igor et Cloutier, Guy et Soulez, Gilles. 2017. « Abdominal aortic aneurysm follow-up by shear wave elasticity imaging after endovascular repair in a canine model ». European Radiology, vol. 27, nº 5. p. 2161-2169.

Boespflug, Gaël et Maire, Marion et De Crescenzo, Gregory et Lerouge, Sophie et Wertheimer, Michael R.. 2017. « Characterization and comparison of N-, O-, and N+O-functionalized polymer surfaces for efficient (HUVEC) endothelial cell colonization ». Plasma Processes and Polymers, vol. 14, nº 7.

Ceccaldi, Caroline et Assaad, Elias et Hui, Eve et Buccionyte, Medeine et Adoungotchodo, Atma et Lerouge, Sophie. 2017. « Optimization of injectable thermosensitive scaffolds with enhanced mechanical properties for cell therapy ». Macromolecular Bioscience, vol. 17, nº 6.

Ceccaldi, Caroline et Strandman, Satu et Hui, Eve et Montagnon, Emmanuel et Schmitt, Cédric et Hadj Henni, Anis et Lerouge, Sophie. 2017. « Validation and application of a nondestructive and contactless method for rheological evaluation of biomaterials ». Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol. 105, nº 8. p. 2565-2573.

Nisol, Bernard et Watson, Sean et Lerouge, Sophie et Wertheimer, Michael R.. 2017. « Energetics of reactions in a dielectric barrier discharge with argon carrier gas: V hydrocarbons ». Plasma Processes and Polymers, vol. 14, nº 8.

Qinghua, Wu et Maire, Marion et Lerouge, Sophie et Therriault, Daniel et Heuzey, Marie-Claude. 2017. « 3D printing of microstructured and stretchable chitosan hydrogel for guided cell growth ». Advanced Biosystems, vol. 1, nº 6. p. 1700058.

Riahi, Nesrine et Murschel, Frederic et Lerouge, Sophie et Durocher, Yves et Henry, Olivier et De Crescenzo, Gregory. 2017. « Bioavailability of immobilized epidermal growth factor: covalent versus noncovalent grafting ». Biointerphases, vol. 12, nº 1.

Saeed Kilani, Mohammad et Zehtabi, Fatemeh et Lerouge, Sophie et Soulez, Gilles et Bartoli, Jean Michel et Vidal, Vincent et Badran, Mohammad F.. 2017. « New alcohol and onyx mixture for embolization: Feasibility and proof of concept in both in vitro and in vivo models ». CardioVascular and Interventional Radiology, vol. 40, nº 5. p. 735-743.

Savoji, Houman et Maire, Marion et Lequoy, Pauline et Liberelle, Benoit et De Crescenzo, Gregory et Ajji, Abdellah et Wertheimer, Michael R. et Lerouge, Sophie. 2017. « Combining electrospun fiber mats and bioactive coatings for vascular graft prostheses ». Biomacromolecules, vol. 18, nº 1. p. 303-310.

Xu, Jinke et Tam, Mifong et Samaei, Sepideh et Lerouge, Sophie et Barralet, Jake et Stevenson, Mary M. et Cerruti, Marta. 2017. « Mucoadhesive chitosan hydrogels as rectal drug delivery vessels to treat ulcerative colitis ». Acta Biomaterialia, vol. 48. p. 247-257.

Zehtabi, Fatemeh et Dumont-Mackay, Vincent et Fatimi, Ahmed et Bertrand-Grenier, Anthony et Héon, Hélène et Soulez, Gilles et Lerouge, Sophie. 2017. « Chitosan–sodium tetradecyl sulfate hydrogel: Characterization and preclinical evaluation of a novel sclerosing embolizing agent for the treatment of endoleaks ». CardioVascular and Interventional Radiology, vol. 40, nº 4. p. 576-584.

Zehtabi, Fatemeh et Ispas-Szabo, Pompilia et Djerir, Djahida et Sivakumaran, Lojan et Annabi, Borhane et Soulez, Gilles et Mateescu, Mircea Alexandru et Lerouge, Sophie. 2017. « Chitosan-doxycycline hydrogel: An MMP inhibitor/sclerosing embolizing agent as a new approach to endoleak prevention and treatment after endovascular aneurysm repair ». Acta Biomaterialia.
(Sous presse)

Lina, Jean-Marc

Desjardins, Marie-Ève et Carrier, Julie et Lina, Jean-Marc et Fortin, Maxime et Gosselin, Nadia et Montplaisir, Jacques et Zadra, Antonio. 2017. « EEG functional connectivity prior to sleepwalking: Evidence of interplay between sleep and wakefulness ». Sleep, vol. 40, nº 4. p. 1-8.

Deslauriers-Gauthier, Samuel et Lina, Jean-Marc et Butler, Russell et Bernier, Pierre-Michel et Whittingstall, Kevin et Deriche, Rachid et Descoteaux, Maxime. 2017. « Inference and visualization of information flow in the visual pathway using dMRI and EEG ». In Medical Image Computing and Computer-Assisted Intervention : MICCAI 2017 : 20th International Conference, Quebec City, QC, Canada, September 11-13, 2017 : Proceedings : Part I (Quebec City, QC, Canada, Sept. 11-13, 2017) Coll. « Lecture Notes in Computer Science », vol. 10433. , p. 505-512. Springer Verlag.

Gauvin, Mathieu et Sustar, Maja et Little, John M. et Brecelj, Jelka et Lina, Jean-Marc et Lachapelle, Pierre. 2017. « Quantifying the ON and OFF Contributions to the Flash ERG with the Discrete Wavelet Transform ». Translational Vision Science & Technology, vol. 6, nº 1.

Hedrich, T. et Pellegrino, G. et Kobayashi, E. et Lina, J. M. et Grova, C.. 2017. « Comparison of the spatial resolution of source imaging techniques in high-density EEG and MEG ». NeuroImage, vol. 157. p. 531-544.

Maheux, Manon et Bisaillon-Sicotte, Étienne et Tabrizi, Shirin et Armony, Jorge L. et Lina, Jean-Marc et Jolicoeur, Pierre. 2017. « Optimal measurements of hemodynamic response latency in fNIRS using the jackknife approach ». Psychophysiology, vol. 54, nº 1. p. 62-73.

Nadon, Vincent et Bockstael, Annelies et Botteldooren, Dick et Lina, Jean-Marc et Voix, Jérémie. 2017. « Design considerations for robust noise rejection in otoacoustic emissions measured in-field using adaptive filtering ». Acta Acustica United with Acustica, vol. 103, nº 2. p. 299-310.

Liu, Zhaoheng

Agnard, Stéphane et Hazel, Bruce et Liu, Zhaoheng. 2017. « Study of grinding tool profiling for robotic processes ». Machining Science and Technology.
(Sous presse)

Curtat, Jean-Loup et Lanteigne, Jacques et Champliaud, Henri et Liu, Zhaoheng et Lévesque, Jean-Benoît. 2017. « Influence of hammer peening on fatigue life of E309L steel used for 13%Cr-4%Ni blade runner repairs ». International Journal of Fatigue, vol. 100. p. 68-77.

Ghafarizadeh, Seyedbehzad et Tahvilian, Amir Masoud et Chatelain, Jean-François et Liu, Zhaoheng et Champliaud, Henri et Lebrun, Gilbert. 2017. « Numerical simulation of ball-end milling with SPH method ». International Journal of Advanced Manufacturing Technology, vol. 88, nº 1. p. 401-408.

Kedadouche, Mourad et Liu, Zhaoheng. 2017. « Fault feature extraction and classification based on WPT and SVD: Application to element bearings with artificially created faults under variable conditions ». Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 231, nº 22. p. 4186-4196.

Li, Wenchao et Vu, Viet-Hung et Liu, Zhaoheng et Thomas, Marc et Hazel, Bruce. 2017. « Application of adaptable functional series vector time-dependent autoregressive model for extraction of real modal parameters for identification of time-varying systems ». Measurement: Journal of the International Measurement Confederation, vol. 103. p. 143-156.

Vu, Viet-Hung et Liu, Zhaoheng et Thomas, Marc et Hazel, Bruce. 2017. « Modal analysis of a light-weight robot with a rotating tool installed at the end effector ». Proceedings of the Institution of Mechanical Engineers, Part C : Journal of Mechanical Engineering Science, vol. 231, nº 9. p. 1664-1676.

Wang, Wei et Liu, Fei et Liu, Zhaoheng et Yun, Chao. 2017. « Prediction of depth of cut for robotic belt grinding ». International Journal of Advanced Manufacturing Technology, vol. 91, nº 1. p. 669-708.

Lombaert, Hervé

Ahmad, Ola et Lombaert, Herve et Parent, Stefan et Labelle, Hubert et Cheriet, Farida. 2017. « Spectral shape analysis of human torsos: Application to the evaluation of scoliosis surgery outcome ». IEEE Journal of Biomedical and Health Informatics.
(Sous presse)

Lopez-Herrejon, Roberto E.

Acher, Mathieu et Lopez-Herrejon, Roberto E. et Rabiser, Rick. 2017. « Teaching software product lines: A snapshot of current practices and challenges ». ACM Transactions on Computing Education, vol. 18, nº 1.

Assunção, Wesley K. G. et Lopez-Herrejon, Roberto E. et Linsbauer, Lukas et Vergilio, Silvia R. et Egyed, Alexander. 2017. « Multi-objective reverse engineering of variability-safe feature models based on code dependencies of system variants ». Empirical Software Engineering, vol. 22, nº 4. p. 1763-1794.

Assuncao, Wesley K. G. et Lopez-Herrejon, Roberto E. et Linsbauer, Lukas et Vergilio, Silvia R. et Egyed, Alexander. 2017. « Reengineering legacy applications into software product lines: a systematic mapping ». Empirical Software Engineering.
(Sous presse)

Assuncao, Wesley K. G. et Vergilio, Silvia R. et Lopez-Herrejon, Roberto E.. 2017. « Discovering software architectures with search-based merge of UML model variants ». In Mastering Scale and Complexity in Software Reuse : 16th International Conference on Software Reuse, ICSR 2017, May 29, 2017 - May 31, 2017 : Proceedings (Salvador, Brazil, May 29-31, 2017) Coll. « Lecture Notes in Computer Science », vol. 10221. , p. 95-111. Springer Verlag.

Linsbauer, Lukas et Lopez-Herrejon, Roberto Erick et Egyed, Alexander. 2017. « Variability extraction and modeling for product variants ». Software and Systems Modeling, vol. 16, nº 4. p. 1179-1199.

Lopez-Herrejon, Roberto Erick et Illescas, Sheny et Egyed, Alexander. 2017. « A systematic mapping study of information visualization for software product line engineering ». Journal of Software: Evolution and Process.
(Sous presse)

Maref, Wahid

Maref, Wahid. 2017. « Choix de stratégie de réhabilitation pour l’amélioration de la performance énergétique des maisons ». Communication lors de la conférence : 20e Congrès de la CEGQ (Québec, QC, Canada, 15-17 fév. 2017).

Maref, Wahid. 2017. « L’importance d’une réhabilitation intelligente, efficace et éco énergétique des bâtiments ». Communication lors de la conférence : Colloque écoresponsable de la ville St-Laurent : Penser le bâtiment et le transport différemment (Ville Saint-Laurent, QC, Canada, 22 fév. 2017).

Masson, Christian

Cambron, Philippe et Tahan, Antoine et Masson, Christian et Pelletier, Francis. 2017. « Bearing temperature monitoring of a Wind Turbine using physics-based model ». Journal of Quality in Maintenance Engineering, vol. 23, nº 4. p. 479-488.

Nathan, J. et Meyer Forsting, A. R. et Troldborg, N. et Masson, C.. 2017. « Comparison of OpenFOAM and EllipSys3D actuator line methods with (NEW) Mexico results ». In Wake Conference 2017 (Visby, Sweden, May 30-June 01, 2017) Coll. « Journal of Physics: Conference Series », vol. 854. Institute of Physics Publishing.

McGuffin, Michael John

Dumas, Maxime et McGuffin, Michael J. et Chassé, Patrick. 2017. « Compression and shifting to reduce occlusion in multiple short time series ». In IEEE Pacific Visualization Symposium (PacificVis) (Seoul, South Korea, Apr. 18-21, 2017), p. 280-289. Piscataway, NJ, USA : IEEE.

Monette, Frédéric

Bi, Eustache Goore et Gachon, Philippe et Vrac, Mathieu et Monette, Frédéric. 2017. « Which downscaled rainfall data for climate change impact studies in urban areas? Review of current approaches and trends ». Theoretical and Applied Climatology, vol. 127, nº 3-4. p. 685-699.

Monfet, Danielle

Jacquet, Sébastien et Le Bel, Célyn et Monfet, Danielle. 2017. « In situ evaluation of thermostat setback scenarios for all-electric single-family houses in cold climate ». Energy and Buildings, vol. 154. p. 538-544.

Morency, François

de Brito Siqueira Tagawa, Gitsuzo et Beccardi, Thomas et Samieri, Valerio et Morency, François. 2017. « RANS prediction of aerodynamic performance at near-stall-angle conditions ». In 63rd Aeronautics Conference : AERO2017 Proceedings (Toronto, ON, Canada, May 16-18, 2017) Canadian Aeronautics and Space Institute.

Günebak, S. et Nadeau, S. et Morency, F. et Straeter, O.. 2017. « Analysis of eye-tracking dynamics in aircraft ground deicing ». In 63rd Aeronautics Conference (CASI-AERO) (Toronto, ON, Canada, May 16-18, 2017) Canadian Aeronautics and Space Institute.

Ignatowicz, Kevin et Morency, François. 2017. « Numerical study of ice particle shedding: Interpolation methods and 2D trajectories ». In 63rd Aeronautics Conference : AERO2017 Proceedings (Toronto, ON, Canada, May 16-18, 2017) Canadian Aeronautics and Space Institute.

Landau, Kurt et Nadeau, Sylvie et Le Floch, Tiphaine et Morency, François. 2017. « Ergonomic time and motion studies of aircraft de-icing work ». Journal of Ergonomics, vol. 7, nº 4.

Marty, Clément et Günebak, Servet et Nadeau, Sylvie et Morency, François. 2017. « L’oculométrie peut-elle être utilisée pour étudier le travail de coordonnateur de trafic dans un centre de dégivrage aéronautique centralisé ? ». In 52ème Congrès de la Société d’Ergonomie de Langue Française (SELF) (Toulouse, France, Sept. 20-22, 2017), p. 215-222. Société d'Ergonomie de Langue Française.

Morency, François et Beaugendre, Héloïse. 2017. « Improvement of near wall velocity prediction using mask in a penalised Vortex-In-Cell algorithm ». Communication lors de la conférence : 14th US National Congress on Computational Mechanics (Montreal, QC, Canada, July 17-20, 2017).

Nadeau, Sylvie et Morency, François. 2017. « De-icing of aircraft : incorporating business risks and occupational health and safety ». International Journal of Safety and Security Engineering, vol. 7, nº 2. p. 247-266.

Slim, H. et Nadeau, S. et Morency, F.. 2017. « A review of applied methods for aircraft on-ground deicing ». Affiche présentée lors de la conférence : Congrès annuel AQHSST (Victoriaville, QC, Canada, 16-18 mai 2017).

Toledano, Alvaro et Morency, François et Weiss, Julien et Broughton, Cabot et Benmeddour, Ali. 2017. « Study of the subsonic wall interference in stall of the NASA CRM at the NRC 1.5 m trisonic wind tunnel ». In 33rd AIAA Aerodynamic Measurement Technology and Ground Testing Conference (Denver, CO, USA, June 05-09, 2017) Coll. « AIAA Paper », vol. AIAA 2017-4130. AIAA.

Velazquez, Oliverio E. et Weiss, Julien et Morency, François. 2017. « Preliminary investigation on stall characteristics of a regional BWB for low speed approach ». In 35th AIAA Applied Aerodynamics Conference (Denver, CO, USA, June 05-09, 2017) Coll. « AIAA Paper », vol. AIAA 2017-3738. AIAA.

Yakhya, Saleh et Morency, François. 2017. « CFD investigation of turbulent heat transfer from a hot jet used for aircraft ground de-icing ». In 63rd Aeronautics Conference : AERO2017 Proceedings (Toronto, ON, Canada, May 16-18, 2017) Canadian Aeronautics and Space Institute.

Yakhya, Saleh et Morency, Francois. 2017. « Numerical study of momentum and heat transfer in propylene glycol jets used for aircraft ground deicing ». In 23rd AIAA Computational Fluid Dynamics Conference (Denver, CO, USA, June 05-09, 2017) Coll. « AIAA Paper », vol. AIAA 2017-4504. AIAA.

Moustapha, Hany

Moret, Maxime et Delecourt, Alexandre et Moustapha, Hany et Abenhaim, Acher-Igal et Garnier, Francois. 2017. « Automated thermal and stress preliminary analyses applied to a turbine rotor ». Aerospace Science and Technology, vol. 63. p. 123-131.

Ouellet, Yannick et Savaria, Christian et Roy, François et Moustapha, Hany et Garnier, François. 2017. « A Preliminary design system for turbine discs ». International Journal of Turbo & Jet-Engines.
(Sous presse)

Twahir, Abdulhalim et Moustapha, Hany et Doré, Sylvie et Roy, François. 2017. « A framework for an integrated turbine rotor design system ». In Global Power and Propulsion Forum : Proceedings (Zurich, Switzerland, Jan. 16-18, 2017) Global Power & Propulsion Society.

Nabki, Frédéric

Alameh, Abdul Hafiz et Nabki, Frédéric. 2017. « A 0.13 μm CMOS power conditioning circuit for piezoelectric vibration energy harvesters ». In IEEE 60th International Midwest Symposium on Circuits and Systems (MWSCAS) (Boston, MA, USA, Aug 06-09, 2017), p. 839-842. Piscataway, NJ, USA : IEEE.

Alameh, Abdul Hafiz et Nabki, Frederic. 2017. « A 0.13-μm CMOS dynamically reconfigurable charge pump for electrostatic MEMS actuation ». IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 25, nº 4. p. 1261-1270.

Cicek, Paul-Vahe et Elsayed, Mohannad et Nabki, Frederic et El-Gamal, Mourad. 2017. « A novel multi-level IC-compatible surface microfabrication technology for MEMS with independently controlled lateral and vertical submicron transduction gaps ». Journal of Micromechanics and Microengineering, vol. 27, nº 11.

El Alaoui Ismaili, Zakaria et Ajib, Wessam et Gagnon, François et Nabki, Frederic. 2017. « A 0.13 μm CMOS fully integrated 0.1 ~ 12 GHz frequency synthesizer for avionic SDR applications ». In IEEE International Symposium on Circuits and Systems (ISCAS) (Baltimore, MD, USA, May 28-31, 2017) Piscataway, NJ, USA : IEEE.

Elsayed, Mohannad Y. et Nabki, Frederic. 2017. « 18-MHZ Silicon lame mode resonators with corner and central anchor architectures in a dual-wafer SOI technology ». Journal of Microelectromechanical Systems, vol. 26, nº 1. p. 67-74.

Elsayed, Mohannad Y. et Nabki, Frederic. 2017. « Piezoelectric bulk mode disk resonator post-processed for enhanced quality factor performance ». Journal of Microelectromechanical Systems, vol. 26, nº 1. p. 75-83.

Honarparvar, M. et de la Rosa, J. M. et Nabki, F. et Sawan, M.. 2017. « SMASH ΔΣ modulator with adderless feed-forward loop filter ». Electronics Letters, vol. 53, nº 8. p. 532-534.

Honarparvar, Mohammad et de la Rosa, José M. et Nabki, Frédéric et Sawan, Mohamad. 2017. « Novel band-pass modulators based on a modified adder-less feed-forward structure ». In IEEE 60th International Midwest Symposium on Circuits and Systems (MWSCAS) (Boston, MA, USA, Aug. 06-09, 2017), p. 1288-1291. Piscataway, NJ, USA : IEEE.

Menard, Michael et Elsayed, Mohannad Y. et Brière, Jonathan et Rabbani-Haghighi, Hadi et Saidani, Menouer et Bérard, Martin et Ménard, François et Nabki, Frederic. 2017. « Integrated optical switch controlled with a MEMS rotational electrostatic actuator ». In Advanced Photonics (PS 2017) (New Orleans, LA, USA, July 24-27, 2017) Coll. « Optics InfoBase Conference Papers ». OSA - The Optical Society.

Sauvé, Quentin et Favre, Damien et Morin-Laporte, Gabriel et Taherzadeh-Sani, Mohammad et Constantin, Nicolas et Nabki, Frederic. 2017. « A calibration-free 13-bit 0.9 V differential SAR-ADC with hybrid DAC and dithering ». In IEEE International Symposium on Circuits and Systems (ISCAS) (Baltimore, MD, USA, May 28-31, 2017) Piscataway, NJ, USA : IEEE.

Taherzadeh-Sani, Mohammad et Hussain Hussaini, Said M. et Rezaee-Dehsorkh, Hamidreza et Nabki, Frederic et Sawan, Mohamad. 2017. « A 170-dB CMOS TIA with 52-pA input-referred noise and 1-MHz bandwidth for very low current sensing ». IEEE Transactions on Very Large Scale Integration (VLSI) Systems, vol. 25, nº 5. p. 1756-1766.

Vejdani, Parisa et Bouchami, Anoir et Nabki, Frédéric. 2017. « Signal conditioning circuit with ultra-high sensitivity and ultra-low power consumption for MEMS ». In IEEE 60th International Midwest Symposium on Circuits and Systems (MWSCAS) (Boston, MA, USA, Aug. 06-09, 2017), p. 930-933. Piscataway, NJ, USA : IEEE.

Vejdani, Parisa et Nabki, Frédéric. 2017. « A low-noise, low-power signal conditioning circuit with narrow bandwidth ». In IEEE 60th International Midwest Symposium on Circuits and Systems (MWSCAS) (Boston, MA, USA, Aug. 06-09, 2017), p. 1461-1464. Piscataway, NJ, USA : IEEE.

Nadeau, Sylvie

Coutu, S. et Nadeau, S. et Ateme-Nguema, B.. 2017. « Implantation d’un département de maintenance intégrant Lean et santé et sécurité du travail ». Affiche présentée lors de la conférence : Congrès annuel AQHSST (Victoriaville, QC, Canada, 16-18 mai 2017).

Darveau, J. et Gosselin, S. et Lagrandeur, A. et Nadeau, S. et Hallé, S. et Boudreau-Trudel, B.. 2017. « Étude et conception primaire des tableaux de bord de boulonneuses et foreuses ». Communication lors de la conférence : Le colloque APSM (Malartic, Abitibi, 15 mars 2017).

Demers, Sébastien et Nadeau, Sylvie et Bouzid, Abdel-Hakim. 2017. « Analytical evaluation of stresses and displacements of an intervertebral disc ». Journal of Biomechanical Science and Engineering, vol. 12, nº 3.

Diop, I. et Nadeau, S. et Emami-Mehrgani, B.. 2017. « Human error, optimal production control policies and corrective maintenance with lockout-tagout ». In Applied Human Factors and Ergonomics Conferrence (AHFE) (Los Angeles, CA, USA, July 17-21, 2017)

Günebak, S. et Nadeau, S. et Morency, F. et Straeter, O.. 2017. « Analysis of eye-tracking dynamics in aircraft ground deicing ». In 63rd Aeronautics Conference (CASI-AERO) (Toronto, ON, Canada, May 16-18, 2017) Canadian Aeronautics and Space Institute.

Landau, Kurt et Nadeau, Sylvie et Le Floch, Tiphaine et Morency, François. 2017. « Ergonomic time and motion studies of aircraft de-icing work ». Journal of Ergonomics, vol. 7, nº 4.

Marty, Clément et Günebak, Servet et Nadeau, Sylvie et Morency, François. 2017. « L’oculométrie peut-elle être utilisée pour étudier le travail de coordonnateur de trafic dans un centre de dégivrage aéronautique centralisé ? ». In 52ème Congrès de la Société d’Ergonomie de Langue Française (SELF) (Toulouse, France, Sept. 20-22, 2017), p. 215-222. Société d'Ergonomie de Langue Française.

Nadeau, Sylvie. 2017. « La perception des risques ». Communication lors de la conférence : Événement – Leadership SST du Centre patronal de santé et de sécurité du travail du Québec : Les risques et la « Tolérance Zéro », êtes-vous bien outillé? (Brossard, QC, Canada, 30 mai 2017).

Nadeau, Sylvie. 2017. « Le lean university va-t-il franchir nos portes? ». Travail et Santé, vol. 33, nº 3. p. 36.

Nadeau, Sylvie. 2017. « Lean, Six Sigma and Lean Six Sigma in higher education: a review of experiences around the world ». American Journal of Industrial and Business Management, vol. 7, nº 5. p. 591-603.

Nadeau, Sylvie et Landau, Kurt. 2017. « Industrie 4.0 : Êtes-vous prêts (es)? ». Travail et Santé, vol. 33, nº 2. p. 30.

Nadeau, Sylvie et Landau, Kurt. 2017. « Towards dynamic and adaptive allocation of staff in a digital-organised production context: an innovative perspective from work science ». Journal of Ergonomics, vol. 7, nº 4.

Nadeau, Sylvie et Morency, François. 2017. « De-icing of aircraft : incorporating business risks and occupational health and safety ». International Journal of Safety and Security Engineering, vol. 7, nº 2. p. 247-266.

Nemati, A. et Nadeau, S. et Ateme-Nguema, B.. 2017. « Lean tools adaptation into mining : an occupational health and safety approach ». Affiche présentée lors de la conférence : Congrès annuel AQHSST (Victoriaville, QC, Canada, 16-18 mai 2017).

Slim, H. et Nadeau, S. et Morency, F.. 2017. « A review of applied methods for aircraft on-ground deicing ». Affiche présentée lors de la conférence : Congrès annuel AQHSST (Victoriaville, QC, Canada, 16-18 mai 2017).

Wyckaert, Pauline et Nadeau, Sylvie et Bouzid, Hakim. 2017. « Analysis of risks of pressure vessels ». In Gesellschaft für Arbeitswissenschaft : Soziotechnische Gestaltung des digitalen Wandels – kreativ, innovativ, sinnhaft (Zurich, Suisse, Fev. 15-17, 2017) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 63. GFA Press.

Nerguizian, Vahé

Nerguizian, V. et Alazzam, A. et Stiharu, I. et Burnier Jr., M.. 2017. « Characterization of several cancer cell lines at microwave frequencies ». Measurement: Journal of the International Measurement Confederation, vol. 109. p. 354-358.

Nguyen, Kim Khoa

Dandres, Thomas et Farrahi Moghaddam, Reza et Nguyen, Kim Khoa et Lemieux, Yves et Samson, Réjean et Cheriet, Mohamed. 2017. « Consideration of marginal electricity in real-time minimization of distributed data centre emissions ». Journal of Cleaner Production, vol. 143. p. 116-124.

Dandres, Thomas et Vandromme, Nathan et Obrekht, Glasha et Wong, Andy et Nguyen, Kim Khoa et Lemieux, Yves et Cheriet, Mohamed et Samson, Réjean. 2017. « Consequences of future data center deployment in canada on electricity generation and environmental impacts: A 2015-2030 prospective study ». Journal of Industrial Ecology, vol. 21, nº 5. p. 1312-1322.

Ngô, Anh Dung

Tran, N. H. et Le, C. et Ngo, A. D.. 2017. « Experimental investigation of speed control of hydraulic motor using proportional valve ». In International Conference on System Science and Engineering (ICSSE) (Ho Chi Minh City, Vietnam, July 21-23, 2017), p. 330-335. Piscataway, NJ, USA : IEEE.

Nollet, Marie-José

Belleau, Jean-François et Khaled, Amar et Nollet, Marie-Josée. 14 Février 2017. « Parametric Study of the Seismic Response of Bridges ». [Research Paper Introduction]. Substance ÉTS.

Belleau, Jean-François et Khaled, Amar et Nollet, Marie-Josée. 14 Février 2017. « Étude paramétrique de la réponse sismique des ponts ». [Research Paper Introduction]. Substance ÉTS.

Nastev, Miroslav et Nollet, Marie-José et Abo El Ezz, Ahmad et Smirnoff, Alex et Ploeger, Sarah Kate et McGrath, Heather et Sawada, Michael et Stefanakis, Emmanuel et Parent, Michel. 2017. « Methods and tools for natural hazard risk analysis in eastern canada: using knowledge to understand vulnerability and implement mitigation measures ». Natural Hazards Review, vol. 18, nº 1.

Ouellet-Plamondon, Claudiane et Soro, Nahouo et Nollet, Marie-José. 2017. « Characterization, mix design, mechanical testing of earth materials, stabilized and unstabilized, for building construction ». In Poromechanics VI. Sixth BIOT Conference on Poromechanics (Reston, VA, USA, July 09-13, 2017), p. 905-912. American Society of Civil Engineers.

Nuño, Natalia

Quevedo González, Fernando J. et Reimeringer, Michael et Nuño, Natalia. 2017. « On the two-dimensional simplification of three-dimensional cementless hip stem numerical models ». Journal of Biomechanical Engineering, vol. 139, nº 3.

Ouellet-Plamondon, Claudiane

Baabou, Wafaa et Grunewald, Nicole et Ouellet-Plamondon, Claudiane et Gressot, Michel et Galli, Alessandro. 2017. « The ecological footprint of Mediterranean cities: awareness creation and policy implications ». Environmental Science and Policy, vol. 69. p. 94-104.

Geraldo, R. H. et Ouellet-Plamondon, C. M. et Muianga, E. A. D. et Camarini, G.. 2017. « Alkali-activated binder containing wastes: a study with rice husk ash and red ceramic ». Cerâmica, vol. 63, nº 365. p. 44-51.

Huang, Yanbo B. et Ouellet-Plamondon, Claudiane M. et Thomson, Steven J. et Reddy, Krishna N.. 2017. « Characterizing downwind drift deposition of aerially applied glyphosate using RbCl as tracer ». International Journal of Agricultural and Biological Engineering, vol. 10, nº 3. p. 31-36.

Ouellet-Plamondon, Claudiane et Soro, Nahouo et Nollet, Marie-José. 2017. « Characterization, mix design, mechanical testing of earth materials, stabilized and unstabilized, for building construction ». In Poromechanics VI. Sixth BIOT Conference on Poromechanics (Reston, VA, USA, July 09-13, 2017), p. 905-912. American Society of Civil Engineers.

Ouhimmou, Mustapha

D'Amours, Sophie et Ouhimmou, Mustapha et Audy, Jean-François et Feng, Yan, éds. 2017. « Forest Value Chain Optimization and Sustainability ». CRC Press. 344 p.

Abasian, Foroogh et Ronnqvist, Mikael et Ouhimmou, Mustapha. 2017. « Forest fibre network design with multiple assortments: a case study in Newfoundland ». Canadian Journal of Forest Research, vol. 47, nº 9. p. 1232-1243.

Paquet, Marc

Garcia-Alvarado, Marthy et Paquet, Marc et Chaabane, Amin et Amodeo, Lionel. 2017. « Inventory management under joint product recovery and cap-and-trade constraints ». Journal of Cleaner Production, vol. 167. p. 1499-1517.

Paquette, Eric

Conti, Jessica et Ozell, Benoit et Paquette, Eric et Renaud, Patrice. 2017. « Adjusting stereoscopic parameters by evaluating the point of regard in a virtual environment ». Computers and Graphics, vol. 69. p. 24-35.

Dagenais, F. et Gagnon, J. et Paquette, E.. 2017. « Detail-preserving explicit mesh projection and topology matching for particle-based fluids ». Computer Graphics Forum.
(Sous presse)

Pedersoli, Marco

Ghodrati, Amir et Diba, Ali et Pedersoli, Marco et Tuytelaars, Tinne et Van Gool, Luc. 2017. « DeepProposals: Hunting objects and actions by cascading deep convolutional layers ». International Journal of Computer Vision, vol. 124, nº 2. p. 115-131.

Perraton, Daniel

Godenzoni, Carlotta et Graziani, Andrea et Perraton, Daniel. 2017. « Complex modulus characterisation of cold-recycled mixtures with foamed bitumen and different contents of reclaimed asphalt ». Road Materials and Pavement Design, vol. 18, nº 1. p. 130-150.

Graziani, A. et Di Benedetto, H. et Perraton, D. et Sauzeat, C. et Hofko, B. et Poulikakos, L. D. et Pouget, S.. 2017. « Recommendation of RILEM TC 237-SIB on complex Poisson's ratio characterization of bituminous mixtures ». Materials and Structures, vol. 50, nº 2. p. 7.

Lachance-Tremblay, Eric et Perraton, Daniel et Vaillancourt, Michel et Di Benedetto, Herve. 2017. « Degradation of asphalt mixtures with glass aggregates subjected to freeze-thaw cycles ». Cold Regions Science and Technology, vol. 141. p. 8-15.

Lamothe, Sébastien et Perraton, Daniel et Benedetto, Hervé Di. 2017. « Degradation of hot mix asphalt samples subjected to freeze-thaw cycles and partially saturated with water or brine ». Road Materials and Pavement Design, vol. 18, nº 4. p. 849-864.

Petit, Yvan

Brummund, Martin et Brailovski, Vladimir et Petit, Yvan et Facchinello, Yann et Mac-Thiong, Jean-Marc. 2017. « Impact of anchor type on porcine lumbar biomechanics: Finite element modelling and in-vitro validation ». Clinical Biomechanics, vol. 43. p. 86-94.

Dahmani, Jawad et Petit, Yvan et Laporte, Catherine. 2017. « Model-based correction of ultrasound image deformations due to probe pressure ». In Medical Imaging 2017: Image Processing (Orlando, FL, USA, Feb. 11-16, 2017) Coll. « Proceedings of SPIE », vol. 10133. SPIE.

Facchinello, Yann et Wagnac, Éric et Ung, Bora et Petit, Yvan et Pradhan, Prabin et Peyrache, Louis-Marie et Mac-Thiong, Jean-Marc. 2017. « Development of an instrumented spinal cord surrogate using optical fibers: A feasibility study ». Medical Engineering and Physics.
(Sous presse)

Facchinello, Yann et Wagnac, Eric et Ung, Bora et Petit, Yvan et Pradhan, Prabin et Peyrache, Louis-Marie et Mac-Thiong, Jean-Marc. 2017. « Instrumented spinal cord surrogate using optical fiber: role of the fiber's location ». In IASTED International Conference on Biomedical Engineering (BioMed 2017) (Innsbruck, Austria, Feb. 20-21, 2017), p. 229-232. ACTA Press.

Soliman, Hany A. G. et Mac-Thiong, Jean-Marc et Levasseur, Annie et Parent, Stefan et Petit, Yvan. 2017. « Assessment of regional bone density in fractured vertebrae using quantitative computed tomography ». Asian Spine Journal, vol. 11, nº 1. p. 57-62.

Pham, Tan

Mirakhorli, F. et Cao, X. et Pham, X. T. et Wanjara, P. et Fihey, J. L.. 2017. « Phase structures and morphologies of tempered CA6NM stainless steel welded by hybrid laser-arc process ». Materials Characterization, vol. 123. p. 264-274.

Mirakhorli, F. et Cao, X. et Pham, X. T. et Wanjara, P. et Fihey, J. L.. 2017. « Technical challenges in narrow-gap root pass welding during tandem and hybrid laser-arc welding of a thick martensitic stainless steel ». In International conference on processing and manufacturing of advanced materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) Coll. « Materials Science Forum », vol. 879. , p. 1305-1310. Trans Tech Publications.

Sabri, V. et Sattarpanah, S. et Tahan, S. A. et Cuillière, J. C. et François, V. et Pham, X. T.. 2017. « A robust and automated FE-based method for fixtureless dimensional metrology of non-rigid parts using an improved numerical inspection fixture ». International Journal of Advanced Manufacturing Technology, vol. 92, nº 5-8. p. 2411-2423.

Vu, Ngoc-Hung et François, Vincent et Cuillière, Jean-Christophe et Pham, Xuan-Tan. 2017. « Development of finite strain shell elements for multi-layered fiber-reinforced materials applied for non-rigid parts deformation during assembly process ». In Design, Manufacturing and Applications of Composites : Proceedings of the Eleventh Joint Canada-Japan Workshop on Composites and the First Joint Canada-Japan-Vietnam Workshop on Composites August 2016, Ho Chi Minh, Vietnam (Ho Chi Minh, Vietnam, Aug. 08-12, 2016), p. 96-103. DEStech publications.

Polotski, Vladimir

Polotski, Vladimir et Kenne, Jean-Pierre et Gharbi, Ali. 2017. « Production and setup policy optimization for hybrid manufacturing–remanufacturing systems ». International Journal of Production Economics, vol. 183, Part B. p. 322-333.

Polotski, Vladimir et Kenne, Jean-Pierre et Gharbi, Ali. 2017. « Set-up and production planning in hybrid manufacturingremanufacturing systems with large returns ». International Journal of Production Research, vol. 55, nº 13. p. 3766-3787.

Poulin, Annie

Bajamgnigni Gbambie, Abdas Salam et Poulin, Annie et Boucher, Marie-Amélie et Arsenault, Richard. 2017. « Added value of alternative information in interpolated precipitation datasets for hydrology ». Journal of Hydrometeorology, vol. 18, nº 1. p. 247-264.

Ibarra-Zavaleta, Sara Patricia et Landgrave, Rosario et Romero-López, Rabindranarth et Poulin, Annie et Arango-Miranda, Raúl. 2017. « Distributed hydrological modeling: Determination of theoretical hydraulic potential & streamflow simulation of extreme hydrometeorological events ». Water, vol. 9, nº 8.

Martel, Jean-Luc et Demeester, Kenjy et Brissette, François et Poulin, Annie et Arsenault, Richard. 2017. « HMETS-A simple and efficient hydrology model for teaching hydrological modelling, flow forecasting and climate change impacts ». International Journal of Engineering Education, vol. 33, nº 4. p. 1307-1316.

Ratté, Sylvie

Alejandro Molina, Otilia et Ratté, Sylvie. 2017. « Students and teacher academic evaluation perceptions: Methodology to construct a representation based on actionable knowledge discovery framework ». Education and Information Technologies, vol. 22, nº 3. p. 1043-1066.

Pasillas-Díaz, José Ramon et Ratté, Sylvie. 2017. « Bagged subspaces for unsupervised outlier detection ». Computational Intelligence, vol. 33, nº 3. p. 507-523.

Ratté, Sylvie et Hernández-Domínguez, Laura et Davis, Boyd et Pope, Charlene et Roche-Bergua, Andres et Sierra-Martínez, Gerardo. 2017. « Cécilia project : an international multidisciplinary collaboration on the study language in later life ». Affiche présentée lors de la conférence : Corpora for Language and Aging Research (CLARe 3 ) (Berlin, Allemagne, Mar. 06-08, 2017).

Tibamoso, Gerardo et Ratté, Sylvie et Duong, Luc. 2017. « Left ventricle wall detection from ultrasound images using shape and appearance information ». In 14th International Conference on Image Analysis and Recognition, ICIAR 2017, July 5, 2017 - July 7, 2017 (Montreal, QC, Canada, July 05-07, 2017) Coll. « Lecture Notes in Computer Science », vol. 10317. , p. 63-70. Springer Verlag.

Velazquez, Erick et Ratté, Sylvie et de Jong, Frank. 2017. « Analyzing students’ knowledge building skills by comparing their written production to syllabus ». In Interactive Collaborative Learning: Proceedings of the 19th ICL Conference) Coll. « Advances in Intelligent Systems and Computing », vol. 544. , p. 345-352. Springer International Publishing.

Rivest, Louis

Danjou, Christophe et Pellerin, Robert et Rivest, Louis. 2017. « Le passage au numérique : Industrie 4.0 : des pistes pour aborder l'ère du numérique et de la connectivité ». Québec : Centre francophone d’informatisation des organisations (CEFRIO). 26 p.

Guerineau, Benjamin et Zheng, Chen et Bricogne, Matthieu et Durupt, Alexandre et Rivest, Louis et Rowson, Harvey et Eynard, Benoît. 2017. « Management of heterogeneous information for integrated design of multidisciplinary systems ». In 27th CIRP Design 2017 (Cranfield, UK, May 10-12, 2017) Coll. « Procedia CIRP », vol. 60. , p. 320-325. Elsevier.

Rivest, Louis. 2017. « Des cas concrets de réussite à l’ère du 4.0 ». Communication lors de la conférence : Colloque sur l’industrie 4.0 (Montréal, QC, Canada, 25 août 2017).

Rivest, Louis et Danjou, Christophe et Pellerin, Robert. 2017. « Positionnements stratégiques pour l’Industrie 4.0 ». Communication lors de la conférence : Entretiens Jacques Cartier : Vers l'Entreprise Aérospatiale Intelligente (Montréal, QC, Canada, 17 oct. 2017).

Robert, Jean-Marc

Avoine, Gildas et Bultel, Xavier et Gambs, Sébastien et Gérault, David et Lafourcade, Pascal et Onete, Cristina et Robert, Jean-Marc. 2017. « A terrorist-fraud resistant and extractor-free anonymous distance-bounding protocol ». In 2017 ACM on Asia Conference on Computer and Communications Security (ASIACCS) (Abu Dhabi, United Arab Emirates, Apr. 02-06, 2017), p. 800-814. ACM.

Rousse, Daniel R.

Haillot, Didier et Pincemin, Sandrine et Goetz, Vincent et Rousse, Daniel R. et Py, Xavier. 2017. « Synthesis and characterization of multifunctional energy composite: Solar absorber and latent heat storage material of high thermal conductivity ». Solar Energy Materials and Solar Cells, vol. 161. p. 270-277.

Jaafar, Mohamad Ali et Rousse, Daniel R. et Gibout, Stéphane et Bédécarrats, Jean-Pierre. 2017. « A review of dendritic growth during solidification: Mathematical modeling and numerical simulations ». Renewable and Sustainable Energy Reviews, vol. 74. p. 1064-1069.

Paradis, Pierre-Luc et Rousse, Daniel R. et Lamarche, Louis et Nesreddine, Hakim. 2017. « A 2-D transient numerical heat transfer model of the solar absorber plate to improve PV/T solar collector systems ». Solar Energy, vol. 153. p. 366-378.

Rezkallah, Miloud et Sharma, Shailendra et Chandra, Ambrish et Singh, Bhim et Rousse, Daniel R.. 2017. « Lyapunov function and sliding mode control approach for Solar-PV grid interface system ». IEEE Transactions on Industrial Electronics, vol. 64, nº 1. p. 785-795.

Saad, Maarouf

Ayala, Magno et Rodas, Jorge et Gregor, Raul et Doval-Gandoy, Jesus et Gonzalez, Osvaldo et Saad, Maarouf et Rivera, Marco. 2017. « Comparative study of predictive control strategies at fixed switching frequency for an asymmetrical six-phase induction motor drive ». In IEEE International Electric Machines and Drives Conference (IEMDC) (Miami, FL, USA, May 21-24, 2017) IEEE.

Brahim, Brahmi et Ochoa-Luna, Cristóbal et Saad, Maarouf et Assad-Uz-Zaman, Md et Islam, Md Rasedul et Rahman, Mohammad Habibur. 2017. « A new adaptive super-twisting control for an exoskeleton robot with dynamic uncertainties ». In IEEE Great Lakes Biomedical Conference (GLBC) (Milwaukee, WI, USA, Apr. 06-07, 2017) Piscataway, NJ, USA : IEEE.

Brahmi, Abdelkrim et Saad, Maarouf et Gauthier, Guy et Zhu, Wen-Hong et Ghommam, Jawhar. 2017. « Adaptive control of multiple mobile manipulators transporting a rigid object ». International Journal of Control, Automation and Systems, vol. 15, nº 4. p. 1779-1789.

Brahmi, Brahim et Saad, Maaroof et Ochoa-Luna, Cristobal et Rahman, Mohammad H.. 2017. « Adaptive control of an exoskeleton robot with uncertainties on kinematics and dynamics ». In International Conference on Rehabilitation Robotics (ICORR) (London, UK, July 17-20, 2017), p. 1369-1374. Piscataway, NJ, USA : IEEE.

Faqihi, Hachmia et Saad, Maarouf et Benjelloun, Khalid et Benbrahim, Mohammed et Kabbaj, M. Nabil. 2017. « Optimal 3D kinematic analysis for human lower limb rehabilitation ». In Proceedings of the 14th International Conference on Informatics in Control, Automation and Robotics (ICINCO) (Madrid, Spain, July 26-28, 2017), p. 177-185. SciTePress.

Fareh, Raouf et Brahmi, Abdelkrim et Saad, Mohamad et Saad, Maarouf et Bettayeb, Maamar. 2017. « Tracking control for non-holonomic mobile manipulator using decentralised control strategy ». International Journal of Modelling, Identification and Control, vol. 28, nº 1. p. 58-69.

Fethalla, Nuradeen et Saad, Maarouf et Michalska, Hannah et Ghommam, Jawhar. 2017. « Robust observer-based backstepping controller for a quadrotor UAV ». In Canadian Conference on Electrical and Computer Engineering (CCECE) (Windsor, ON, Canada, Apr. 30-May 03, 2017) IEEE.

Fethalla, Nuradeen et Saad, Maarouf et Michalska, Hannah et Ghommam, Jawhar. 2017. « Robust tracking control for a quadrotor UAV ». In 25th Mediterranean Conference on Control and Automation (MED) (Valletta, Malta, July 3-6, 2017), p. 1269-1274. Piscataway, NJ, USA : IEEE.

Ghodbane, A. et Saad, M.. 2017. « Active fault-tolerant control system vs Model Reference Adaptive Control system: Performance comparison on flight systems ». In 6th International Conference on Systems and Control (ICSC) (Batna, Algeria, May 07-09, 2017), p. 237-242. IEEE.

Ghommam, Jawhar et Saad, Maaroof. 2017. « Autonomous landing of a quadrotor on a moving platform ». IEEE Transactions on Aerospace and Electronic Systems, vol. 53, nº 3. p. 1504-1519.

Ibrahim, Charles et Mougharbel, Imad et Abou Daher, Nivine et Kanaan, Hadi Y. et Saad, Maarouf et Georges, Semaan. 2017. « A novel generic architecture for the implementation of demand response programs in a smart grid ». In IEEE International Conference on Industrial Technology (ICIT) (Toronto, ON, Canada, Mar. 22-25, 2017), p. 558-563. Piscataway, NJ, USA : IEEE.

Kali, Yassine et Rodas, Jorge et Saad, Maarouf et Gregor, Raul et Benjelloun, Khalid et Doval-Gandoy, Jesus. 2017. « Current control based on super-twisting algorithm with time delay estimation for a five-phase induction motor drive ». In IEEE International Electric Machines and Drives Conference (IEMDC) (Miami, FL, USA, May 21-24, 2017) Piscataway, NJ, USA : IEEE.

Kali, Yassine et Saad, Maaroof et Benjelloun, Khalid. 2017. « Non-singular terminal second order sliding mode with time delay estimation for uncertain robot manipulators ». In 14th International Conference on Informatics in Control, Automation and Robotics (ICINCO 2017) (Madrid, Spain, July 26-28, 2017), p. 226-232. SciTePress.

Kali, Yassine et Saad, Maaroof et Benjelloun, Khalid et Fatemi, Abdelilah. 2017. « Discrete-time second order sliding mode with time delay control for uncertain robot manipulators ». Robotics and Autonomous Systems, vol. 94. p. 53-60.

Kali, Yassine et Saad, Maarouf et Benjelloun, Khalid et Benbrahim, Mohammed. 2017. « Sliding mode with time delay control for robot manipulators ». In Applications of Sliding Mode Control. Coll. « Studies in Systems, Decision and Control », vol. 79. p. 135-156. Springer.

Mondal, Sanjoy et Ghommam, Jawhar et Saad, Maarouf. 2017. « An adaptive finite-time consensus control for higher-order nonlinear multi-agent systems ». In Applications of Sliding Mode Control. Coll. « Studies in Systems, Decision and Control », vol. 79. p. 191-213. Springer.

Mondal, Sanjoy et Ghommam, Jawhar et Saad, Maarouf. 2017. « An adaptive full order sliding mode controller for mismatched uncertain systems ». International Journal of Automation and Computing, vol. 14, nº 2. p. 191-201.

Osman, Kawther et Ghommam, Jawhar et Saad, Maarouf. 2017. « Vision based lane reference detection and tracking control of an automated guided vehicle ». In 25th Mediterranean Conference on Control and Automation (MED) (Valletta, Malta, July 03-06, 2017), p. 595-600. IEEE.

Raouf, Fareh et Saad, Mohamad et Saad, Maarouf et Maamar, Bettayeb. 2017. « Distributed adaptive control strategy for flexible link manipulators ». Robotica, vol. 35, nº 7. p. 1562-1584.

Sharma, Shailendra Kumar et Chandra, Ambrish et Saad, Maarouf et Lefebvre, Serge et Asber, Dalal et Lenoir, Laurent. 2017. « Voltage flicker mitigation employing smart loads with high penetration of renewable energy in distribution systems ». IEEE Transactions on Sustainable Energy, vol. 8, nº 1. p. 414-424.

Sabourin, Robert

Bashbaghi, Saman et Granger, Eric et Sabourin, Robert et Bilodeau, Guillaume-Alexandre. 2017. « Dynamic ensembles of exemplar-SVMs for still-to-video face recognition ». Pattern Recognition, vol. 69. p. 61-81.

Bashbaghi, Saman et Granger, Eric et Sabourin, Robert et Bilodeau, Guillaume-Alexandre. 2017. « Dynamic selection of exemplar-SVMs for watch-list screening through domain adaptation ». In Proceedings of the 6th International Conference on Pattern Recognition Applications and Methods (Porto, Portugal, Feb. 24-26, 2017), p. 738-745. SCITEPRESS.

Bashbaghi, Saman et Granger, Eric et Sabourin, Robert et Bilodeau, Guillaume-Alexandre. 2017. « Robust watch-list screening using dynamic ensembles of SVMs based on multiple face representations ». Machine Vision and Applications, vol. 28, nº 1/2. p. 219-241.

Cruz, Rafael M. O. et Sabourin, Robert et Cavalcanti, George D. C.. 2017. « Analyzing different prototype selection techniques for dynamic classifier and ensemble selection ». In International Joint Conference on Neural Networks (Anchorage, AK, USA, May 14-19, 2017), p. 3959-3966. IEEE.

Cruz, Rafael M. O. et Sabourin, Robert et Cavalcanti, George D. C.. 2017. « META-DES.Oracle: Meta-learning and feature selection for dynamic ensemble selection ». Information Fusion, vol. 38. p. 84-103.

Diaz, Moise et Ferrer, Miguel A. et Eskander, George S. et Sabourin, Robert. 2017. « Generation of duplicated off-line signature images for verification systems ». IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 39, nº 5. p. 951-964.

Ekladious, George et Sabourin, Robert et Granger, Eric. 2017. « Learning global-local distance metrics for signature-based biometric cryptosystems ». Cryptography, vol. 1, nº 3. p. 22.

Hafemann, Luiz G. et Sabourin, Robert et Oliveira, Luiz S.. 2017. « Learning features for offline handwritten signature verification using deep convolutional neural networks ». Pattern Recognition, vol. 70. p. 163-176.

Levesque, Julien-Charles et Durand, Audrey et Gagné, Christian et Sabourin, Robert. 2017. « Bayesian optimization for conditional hyperparameter spaces ». In 2017 International Joint Conference on Neural Networks (IJCNN) (Anchorage, AK, USA, May 14-19, 2017), p. 286-293. Piscataway, NJ, USA : IEEE.

Oliveira, Dayvid V. R. et Cavalcanti, George D. C. et Sabourin, Robert. 2017. « Online pruning of base classifiers for Dynamic Ensemble Selection ». Pattern Recognition, vol. 72. p. 44-58.

Silva, Eunelson J. et Britto, Alceu S. et Oliveira, Luiz S. et Enembreck, Fabricio et Sabourin, Robert et Koerich, Alessandro L.. 2017. « A two-step cascade classification method ». In 2017 International Joint Conference on Neural Networks (IJCNN) (Anchorage, AK, USA, May 14-19, 2017), p. 573-580. Piscataway, NJ, USA : IEEE.

Souza, Mariana A. et Cavalcanti, George D. C. et Cruz, Rafael M. O. et Sabourin, Robert. 2017. « On the characterization of the Oracle for dynamic classifier selection ». In International Joint Conference on Neural Networks (IJCNN) (Anchorage, AK, USA, May 08-12, 2017), p. 332-339. IEEE.

Seers, Patrice

Jourdain, Cyprien et Weiss, Julien et Seers, Patrice. 2017. « Comparison of image preprocessing methods for fuel droplet characterization ». In 47th AIAA Thermophysics Conference (Denver, CO, USA, June 05-09, 2017) Coll. « AIAA Paper », vol. AIAA 2017-4350. AIAA.

Lapalme, Denis et Lemaire, Romain et Seers, Patrice. 2017. « Assessment of the method for calculating the Lewis number of H2/CO/CH4 mixtures and comparison with experimental results ». International Journal of Hydrogen Energy, vol. 42, nº 12. p. 8314-8328.

Lemaire, Romain et Menage, Delphine et Seers, Patrice. 2017. « Study of the high heating rate devolatilization of bituminous and subbituminous coals-Comparison of experimentally monitored devolatilization profiles with predictions issued from single rate, two-competing rate, distributed activation energy and chemical percolation devolatilization models ». Journal of Analytical and Applied Pyrolysis, vol. 123. p. 255-268.

Nazarenko, Yevgen et Fournier, Sébastien et Kurien, Uday et Rangel-Alvarado, Rodrigo Benjamin et Nepotchatykh, Oleg et Seers, Patrice et Ariya, Parisa A.. 2017. « Role of snow in the fate of gaseous and particulate exhaust pollutants from gasoline-powered vehicles ». Environmental Pollution, vol. 223. p. 665-675.

Wang, Hui et Zhang, Lin et Li, Guoliang et Rogers, Kyle et Lin, Hongfei et Seers, Patrice et Ledan, Thomas et Ng, Siauw et Zheng, Ying. 2017. « Application of uniform design experimental method in waste cooking oil (WCO) co-hydroprocessing parameter optimization and reaction route investigation ». Fuel, vol. 210. p. 390-397.

Songmene, Victor

Barzani, Mohsen Marani et Farahany, Saeed et Songmene, Victor. 2017. « Machinability characteristics, thermal and mechanical properties of Al-Mg2Si in-situ composite with bismuth ». Measurement, vol. 110. p. 263-274.

Elgnemi, Tarek et Ahmadi, Keivan et Songmene, Victor et Nam, Jungsoo et Jun, Martin B. G.. 2017. « Effects of atomization-based cutting fluid sprays in milling of carbon fiber reinforced polymer composite ». Journal of Manufacturing Processes, vol. 30. p. 133-140.

Jomaa, Walid et Mechri, Oussama et Levesque, Julie et Songmene, Victor et Bocher, Philippe et Gakwaya, Augustin. 2017. « Finite element simulation and analysis of serrated chip formation during highspeed machining of AA7075T651 alloy ». Journal of Manufacturing Processes, vol. 26. p. 446-458.

Jomaa, Walid et Songmene, Victor et Bocher, Philippe. 2017. « Predictive analytical modeling of cutting forces generated by high-speed machining of ductile and hard metals ». Machining Science and Technology, vol. 21, nº 3. p. 335-361.

Jomaa, Walid et Songmene, Victor et Bocher, Philippe et Gakwaya, Augustin. 2017. « Fea-based comparative investigation on high speed machining of aluminum alloys aa6061-t6 and aa7075-t651 ». In 9th International Congress on Precision Machining, (ICPM 2017) (Athens, Greece, Sept. 06-09, 2017) Coll. « Solid State Phenomena », vol. 261. , p. 347-353.

Khettabi, Riad et Nouioua, Mourad et Djebara, Abdelhakim et Songmene, Victor. 2017. « Effect of MQL and dry processes on the particle emission and part quality during milling of aluminum alloys ». International Journal of Advanced Manufacturing Technology, vol. 92, nº 5/8. p. 2593-2598.

Niknam, Seyed Ali et Balazinski, Marek et Songmene, Victor. 2017. « To characterize and optimize the surface quality attributes in slot milling operation ». International Journal of Advanced Manufacturing Technology.
(Sous presse)

Niknam, Seyed Ali et Davoodi, Behnam et Davim, J. Paulo et Songmene, Victor. 2017. « Mechanical deburring and edge-finishing processes for aluminum partsa review ». International Journal of Advanced Manufacturing Technology.
(Sous presse)

Niknam, Seyed Ali et Songmene, Victor. 2017. « Burr formation and correlation with cutting force and acoustic emission signals ». Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 231, nº 3. p. 399-414.

Sadeghifar, Morteza et Sedaghati, Ramin et Jomaa, Walid et Songmene, Victor. 2017. « Finite element analysis and response surface method for robust multi-performance optimization of radial turning of hard 300M steel ». International Journal of Advanced Manufacturing Technology.
(Sous presse)

Soulaïmani, Azzeddine

Fahsi, Adil et Soulaimani, Azzeddine. 2017. « Numerical investigations of the XFEM for solving two-phase incompressible flows ». International Journal of Computational Fluid Dynamics, vol. 14, nº 1. p. 19-37.

Suryn, Witold

Roy, Jonathan et Terfas, Hebatalla et Suryn, Witold. 2017. « On the use of ISO/IEC standards to address data quality aspects in big data analytics cloud services ». In 20th International Conference on Business Information Systems (BIS) 2017, June 28, 2017 - June 30, 2017 (Poznan, Poland, June 28-30, 2017) Coll. « Lecture Notes in Business Information Processing », vol. 288. , p. 149-164. Springer Verlag.

Tadj, Chakib

Abou-Abbas, Lina et Tadj, Chakib et Fersaie, Hesam Alaie. 2017. « A fully automated approach for baby cry signal segmentation and boundary detection of expiratory and inspiratory episodes ». Journal of the Acoustical Society of America, vol. 142, nº 3. p. 1318-1331.

Abou-Abbas, Lina et Tadj, Chakib et Gargour, Christian et Montazeri, Leila. 2017. « Expiratory and inspiratory cries detection using different signals' decomposition techniques ». Journal of Voice, vol. 31, nº 2. 259.e13-259.e28.

Tahan, Antoine

Aidibe, Ali et Nejad, Mojtaba Kamali et Tahan, Antoine et Jahazi, Mohammad et Cloutier, Sylvain G.. 2017. « Surface characterization of die inserts used for LED lamp plastic lenses ». International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12. p. 3395-3403.

Cambron, Philippe et Tahan, Antoine et Masson, Christian et Pelletier, Francis. 2017. « Bearing temperature monitoring of a Wind Turbine using physics-based model ». Journal of Quality in Maintenance Engineering, vol. 23, nº 4. p. 479-488.

Jbira, I. et Tlija, M. et Louhichi, B. et Tahan, A.. 2017. « CAD/Tolerancing integration: Mechanical assembly with form defects ». Advances in Engineering Software.
(Sous presse)

Poirier, Marc et Gagnon, Martin et Tahan, Antoine et Coutu, André et Chamberland-lauzon, Joël. 2017. « Extrapolation of dynamic load behaviour on hydroelectric turbine blades with cyclostationary modelling ». Mechanical Systems and Signal Processing, vol. 82. p. 193-205.

Sabri, V. et Sattarpanah, S. et Tahan, S. A. et Cuillière, J. C. et François, V. et Pham, X. T.. 2017. « A robust and automated FE-based method for fixtureless dimensional metrology of non-rigid parts using an improved numerical inspection fixture ». International Journal of Advanced Manufacturing Technology, vol. 92, nº 5-8. p. 2411-2423.

Touazine, Heithem et Akab, Jordan et Jahazi, Mohammad et Tahan, Antoine et Jomaa, Walid et Bocher, Philippe. 2017. « Modeling of the microstructure alteration induced by hard turning of Inconel 718 ». International Journal of Advanced Manufacturing Technology.
(Sous presse)

Talhi, Chamseddine

Chowdhury, Rasel et Ould-Slimane, Hakima et Talhi, Chamseddine et Cheriet, Mohamed. 2017. « Attribute-based encryption for preserving smart home data privacy ». In Enhanced Quality of Life and Smart Living : 15th International Conference, ICOST 2017, Paris, France, August 29-31, 2017, Proceedings (Paris, France, Aug. 29-31, 2017) Coll. « Lecture Notes in Computer Science », vol. 10461. , p. 185-197. Springer Verlag.

Khreich, Wael et Khosravifar, Babak et Hamou-Lhadj, Abdelwahab et Talhi, Chamseddine. 2017. « An anomaly detection system based on variable N-gram features and one-class SVM ». Information and Software Technology, vol. 91. p. 186-197.

Khreich, Wael et Murtaza, Syed Shariyar et Hamou-Lhadj, Abdelwahab et Talhi, Chamseddine. 2017. « Combining heterogeneous anomaly detectors for improved software security ». Journal of Systems and Software.
(Sous presse)

Ledjiar, Abderrahmane et Sampin, Emmanuel et Talhi, Chamseddine et Cheriet, Mohamed. 2017. « Network function virtualization as a service for multi-tenant software defined networks ». In 4th International Conference on Software-Defined Systems (SDS) (Valencia, Spain, May, 08-11 2017), p. 168-173. Piscataway, NJ, USA : IEEE.

Tout, Hanine et Talhi, Chamseddine et Kara, Nadjia et Mourad, Azzam. 2017. « Smart mobile computation offloading: Centralized selective and multi-objective approach ». Expert Systems with Applications.
(Sous presse)

Yassin, Mohamed et Ould-Slimane, Hakima et Talhi, Chamseddine et Boucheneb, Hanifa. 2017. « SQLIIDaaS: A SQL injection intrusion detection framework as a service for SaaS providers ». In IEEE 4th International Conference on Cyber-Security and Cloud Computing (CSCloud) (New York, NY, USA, June 26-28, 2017), p. 163-170. IEEE Computer Society.

Terriault, Patrick

Brailovski, Vladimir et Terriault, Patrick et Simoneau, Charles et Dumas, Mathieu et Jetté, Bruno. 2017. « Development of a biomimetic metallic femoral stem: Methodological approach ». In International conference on processing and manufacturing of advanced materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) Coll. « Materials Science Forum », vol. 879. , p. 1788-1793. Trans Tech Publications.

Dumas, Mathieu et Terriault, Patrick et Brailovski, Vladimir. 2017. « Modelling and characterization of a porosity graded lattice structure for additively manufactured biomaterials ». Materials and Design, vol. 121. p. 383-392.

Poulin, Jean-René et Terriault, Patrick et Dubé, Martine et Vachon, Pierre-Luc. 2017. « Development of a morphing wing extrados made of composite materials and actuated by shape memory alloys ». Journal of Intelligent Material Systems and Structures, vol. 28, nº 11. p. 1437-1453.

Simoneau, Charles et Terriault, Patrick et Jetté, Bruno et Dumas, Mathieu et Brailovski, Vladimir. 2017. « Development of a porous metallic femoral stem: Design, manufacturing, simulation and mechanical testing ». Materials and Design, vol. 114. p. 546-556.

Terriault, Patrick et Brailovski, Vladimir. 2017. « Influence of boundary conditions on the simulation of a diamond-type lattice structure: A preliminary study ». Advances in Materials Science and Engineering, vol. 2017.

Thibeault, Claude

Amrhar, Abdessamad et Kisomi, Alireza Avakh et Zhang, Eric et Zambrano, Joe et Thibeault, Claude et Landry, René Jr.. 2017. « Multi-mode reconfigurable software defined radio architecture for avionic radios ». In Integrated Communications, Navigation and Surveillance Conference (ICNS) (Herndon, VA, USA, Apr. 18-20, 2017), 2D1/1-2D1/10. Piscataway, NJ, USA : IEEE.

Fiorentino, Mickaël et Savaria, Yvon et Thibeault, Claude. 2017. « FPGA implementation of Token-based Self-timed processors: A case study ». In 15th IEEE International New Circuits and Systems Conference (NEWCAS) (Strasbourg, France, June 25-28, 2017), p. 313-316. Piscataway, NJ, USA : IEEE.

Giard, Pascal et Balatsoukas-Stimming, Alexios et Muller, Thomas Christoph et Bonetti, Andrea et Thibeault, Claude et Gross, Warren J. et Flatresse, Philippe et Burg, Andreas. 2017. « PolarBear: A 28 nm FD-SOI ASIC for decoding of polar codes ». IEEE Journal on Emerging and Selected Topics in Circuits and Systems.
(Sous presse)

Thibeault, Claude et Louati, Ali. 2017. « A new delay testing signal scheme robust to power distribution network impedance variation ». In IEEE 35th VLSI Test Symposium (VTS) (Las Vegas, NV, USA,, Apr. 09-12, 2017) IEEE Computer Society.

Thomas, Marc

Abed, Asma et Bouzidane, Ahmed et Thomas, Marc et Zahloul, Hamou. 2017. « Performance characteristics of a three-pad hydrostatic squeeze film damper compensated with new electrorheological valve restrictors ». Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 231, nº 7. p. 889-899.

Aboshighiba, Hicham et Bouzidane, Ahmed et Thomas, Marc et Ghezali, Faiza et Nemchi, Amina et Abed, Asmaa. 2017. « Pressure distribution in orifice-compensated turbulent hydrostatic bearing with fluid inertia effects using numerical simulations via Navier-Stokes ». Tribology - Materials, Surfaces and Interfaces, vol. 11, nº 1. p. 19-29.

Adewusi, Surajdeen et Thomas, Marc. 2017. « Stress and strain distributions in the human hand-arm system using finite element analysis ». International Journal of Engineering and Technology (UAE), vol. 6, nº 2. p. 21-28.

Ghezali, Faiza et Bouzidane, Ahmed et Thomas, Marc. 2017. « 3D Numerical investigation of pressure field of an orifice compensated hydrostatic bearing ». Mechanics and Industry, vol. 18, nº 1.

Imaouchen, Yacine et Kedadouche, Mourad et Alkama, Rezak et Thomas, Marc. 2017. « A Frequency-Weighted Energy Operator and complementary ensemble empirical mode decomposition for bearing fault detection ». Mechanical Systems and Signal Processing, vol. 82. p. 103-116.

Li, Wenchao et Vu, Viet-Hung et Liu, Zhaoheng et Thomas, Marc et Hazel, Bruce. 2017. « Application of adaptable functional series vector time-dependent autoregressive model for extraction of real modal parameters for identification of time-varying systems ». Measurement: Journal of the International Measurement Confederation, vol. 103. p. 143-156.

Thomas, Marc et Laville, Frédéric. 2017. « Simulation des vibrations mécaniques par Matlab, Simulink et Ansys ». 2e édition. Québec ; Montréal : Presses de l'Université du Québec ; École de technologie supérieure. 700 p.

Vu, Viet-Hung et Liu, Zhaoheng et Thomas, Marc et Hazel, Bruce. 2017. « Modal analysis of a light-weight robot with a rotating tool installed at the end effector ». Proceedings of the Institution of Mechanical Engineers, Part C : Journal of Mechanical Engineering Science, vol. 231, nº 9. p. 1664-1676.

Toews, Matthew

Chaddad, Ahmad et Desrosiers, Christian et Toews, Matthew. 2017. « Multi-scale radiomic analysis of sub-cortical regions in MRI related to autism, gender and age ». Scientific Reports, vol. 7.

Chaddad, Ahmad et Desrosiers, Christian et Toews, Matthew et Abdulkarim, Bassam. 2017. « Predicting survival time of lung cancer patients using radiomic analysis ». Oncotarget, vol. 8, nº 61. p. 104393-104407.

Haj-Hassan, Hawraa et Chaddad, Ahmad et Harkouss, Youssef et Desrosiers, Christian et Toews, Matthew et Tanougast, Camel. 2017. « Classifications of multispectral colorectal cancer tissues using convolution neural network ». Journal of Pathology Informatics, vol. 8, nº 1.

Kumar, Kuldeep et Desrosiers, Christian et Siddiqi, Kaleem et Colliot, Olivier et Toews, Matthew. 2017. « Fiberprint: A subject fingerprint based on sparse code pooling for white matter fiber analysis ». NeuroImage, vol. 158. p. 242-259.

Preiswerk, Frank et Toews, Matthew et Cheng, Cheng-Chieh et Chiou, Jr-yuan George et Mei, Chang-Sheng et Schaefer, Lena F. et Hoge, W. Scott et Schwartz, Benjamin M. et Panych, Lawrence P. et Madore, Bruno. 2017. « Hybrid MRI-Ultrasound acquisitions, and scannerless real-time imaging ». Magnetic Resonance in Medicine, vol. 78, nº 3. p. 897-908.

Tremblay, Christine

Nooruzzaman, Md et Alloune, Nabih et Tremblay, Christine et Littlewood, Paul et Belanger, Michel P.. 2017. « Resource savings in submarine networks using agility of filterless architectures ». IEEE Communications Letters, vol. 3, nº 21. p. 512-515.

Peng, Jizong et Han, Lei et Zhu, Qingming et Qiu, Ciyuan et Zhang, Yong et Tremblay, Christine et Su, Yikai. 2017. « SQNR improvement enabled by nonuniform DAC output levels for IM-DD OFDM systems ». IEEE Photonics Journal, vol. 9, nº 2.

Pradhan, Prabin et Sengupta, Dipankar et Wang, Lixian et Tremblay, Christine et LaRochelle, Sophie et Ung, Bora. 2017. « The Brillouin gain of vector modes in a few-mode fiber ». Scientific Reports, vol. 7.

Tremblay, Christine et Littlewood, Paul et Bélanger, Michel P. et Wosinska, Lena et Chen, Jiajia. 2017. « Agile filterless optical networking ». In 21st International Conference on Optical Network Design and Modeling (ONDM) (Budapest, Hungary, May 15-17, 2017) Institute of Electrical and Electronics Engineers Inc..

Tremblay, Christine et Michel, Annie et Tanoh, Marie Janvier et Bélanger, Michel et Clarke, Steven et Charlton, Douglas W. et Peterson, Daniel L. et Wellbrock, Glenn A.. 2017. « Dynamics of polarization fluctuations in aerial and buried links ». In 19th IEEE International Conference on Transparent Optical Networks (ICTON'17) (Girona, Spain, July 3-6, 2017)

Ung, Bora

Facchinello, Yann et Wagnac, Éric et Ung, Bora et Petit, Yvan et Pradhan, Prabin et Peyrache, Louis-Marie et Mac-Thiong, Jean-Marc. 2017. « Development of an instrumented spinal cord surrogate using optical fibers: A feasibility study ». Medical Engineering and Physics.
(Sous presse)

Facchinello, Yann et Wagnac, Eric et Ung, Bora et Petit, Yvan et Pradhan, Prabin et Peyrache, Louis-Marie et Mac-Thiong, Jean-Marc. 2017. « Instrumented spinal cord surrogate using optical fiber: role of the fiber's location ». In IASTED International Conference on Biomedical Engineering (BioMed 2017) (Innsbruck, Austria, Feb. 20-21, 2017), p. 229-232. ACTA Press.

Huang, Bin et Chen, Haoshuo et Fontaine, Nicolas K. et Jin, Cang et Shang, Kuanping et Ryf, Roland et Essiambre, René-Jean et Ung, Bora et Massadeq, Younès et Larochelle, Sophie et Li, Guifang. 2017. « Spatially and spectrally resolved gain characterization of space-division multiplexing amplifiers with coherent swept-wavelength reflectometry ». Journal of Lightwave Technology, vol. 35, nº 4. p. 741-747.

Pradhan, Prabin et Sengupta, Dipankar et Wang, Lixian et Tremblay, Christine et LaRochelle, Sophie et Ung, Bora. 2017. « The Brillouin gain of vector modes in a few-mode fiber ». Scientific Reports, vol. 7.

Vaillancourt, Michel

Lachance-Tremblay, Eric et Perraton, Daniel et Vaillancourt, Michel et Di Benedetto, Herve. 2017. « Degradation of asphalt mixtures with glass aggregates subjected to freeze-thaw cycles ». Cold Regions Science and Technology, vol. 141. p. 8-15.

Viens, Martin

Meimandi, Shilan et Vanderesse, Nicolas et Thibault, Denis et Bocher, Philippe et Viens, Martin. 2017. « Macro-defects characterization in cast CA-6NM martensitic stainless steel ». Materials Characterization, vol. 124. p. 31-39.

Travaglini, Christophe et Bescond, Christophe et Viens, Martin et Belanger, Pierre. 2017. « Feasibility of high frequency guided wave crack monitoring ». Structural Health Monitoring, vol. 16, nº 4.

Voix, Jérémie

Berger, Elliott et Voix, Jérémie. 2017. « Hearing protection devices ». In The Noise Manual. 6th Edition. American Industrial Hygiene Association.
(Sous presse)

Bonnet, Fabien et Voix, Jérémie et Nelisse, Hugues. 2017. « Loudness in the occluded ear canal: Are we again missing 6 dB? ». Canadian Acoustics = Acoustique Canadienne, vol. 45, nº 3. p. 136-137.

Bouserhal, Rachel E. et Falk, Tiago H. et Voix, Jérémie. 2017. « In-ear microphone speech quality enhancement via adaptive filtering and artificial bandwidth extension ». Journal of the Acoustical Society of America, vol. 141, nº 3. p. 1321-1331.

Cretot-Richert, Gabrielle et Debener, Stefan et De Voos, Marteen et Bleichner, Martin et Voix, Jérémie. 2017. « Closing the efferent auditory loop: audio and EEG-Recording wearable device for cognitive load measurements ». Affiche présentée lors de la conférence : 9th Speech in Noise Workshop (SPIN) (Oldenburg, Germany, Jan. 5-6, 2017).

Leroux, Tony et Laroche, Chantal et Giguère, Christian et Voix, Jérémie. 2017. « Utilisation des prothèses auditives en milieu de travail bruyant ». Coll. « Études et recherches », vol. R-929. IRSST. 103 p.

Martin, Alexis et Voix, Jérémie. 2017. « In-ear audio wearable: Measurement of heart and breathing rates for health and safety monitoring ». IEEE Transactions on Biomedical Engineering.
(Sous presse)

Nadon, Vincent et Bockstael, Annelies et Botteldooren, Dick et Lina, Jean-Marc et Voix, Jérémie. 2017. « Design considerations for robust noise rejection in otoacoustic emissions measured in-field using adaptive filtering ». Acta Acustica United with Acustica, vol. 103, nº 2. p. 299-310.

Valentin, Olivier et Viallet, Guilhem et Voix, Jérémie. 2017. « Eartrodes: Towards a wireless in-ear custom-fitted brain computer interface ». Canadian Acoustics = Acoustique Canadienne, vol. 45, nº 3. p. 142-143.

Voix, Jérémie. 2017. « Hearing protector fit-testing: Spectrum uncertainty budgets ». Canadian Acoustics = Acoustique Canadienne, vol. 45, nº 3. p. 154-155.

Voix, Jérémie. 2017. « The ear beyond hearing : from smart earplug to in-ear brain computer interfaces ». Communication lors de la conférence : 24th International Congress on Sound and Vibration (ICSV24) (London, England, July 23-27, 2017).

Voix, Jérémie et Smith, Pegeen et Berger, Elliott H.. 2017. « Field fit-testing and attenuation measurement procedures ». In The Noise Manual. 6th edition. American Industrial Hygiene Association.
(Sous presse)

Vu, Viet Hung

Li, Wenchao et Vu, Viet-Hung et Liu, Zhaoheng et Thomas, Marc et Hazel, Bruce. 2017. « Application of adaptable functional series vector time-dependent autoregressive model for extraction of real modal parameters for identification of time-varying systems ». Measurement: Journal of the International Measurement Confederation, vol. 103. p. 143-156.

Vu, Viet-Hung et Liu, Zhaoheng et Thomas, Marc et Hazel, Bruce. 2017. « Modal analysis of a light-weight robot with a rotating tool installed at the end effector ». Proceedings of the Institution of Mechanical Engineers, Part C : Journal of Mechanical Engineering Science, vol. 231, nº 9. p. 1664-1676.

Vázquez, Carlos

Aubert, B. et Vidal, P. A. et Parent, S. et Cresson, T. et Vazquez, C. et De Guise, J.. 2017. « Convolutional neural network and in-painting techniques for the automatic assessment of scoliotic spine surgery from biplanar radiographs ». In Medical Image Computing and Computer-Assisted Intervention : MICCAI 2017 : 20th International Conference, Quebec City, QC, Canada, September 11-13, 2017 : Proceedings : Part II (Quebec City, QC, Canada, Sept. 11-13, 2017) Coll. « Lecture Notes in Computer Science », vol. 10434. , p. 691-699. Springer Verlag.

Hojati, Esmaeil et Franche, Jean-François et Coulombe, Stéphane et Vázquez, Carlos. 2017. « Massively parallel rate-constrained motion estimation using multiple temporal predictors in HEVC ». In IEEE International Conference on Multimedia and Expo (ICME) (Hong Kong, China, July 10-14, 2017), p. 43-48. Piscataway, NJ, USA : IEEE.

Wagnac, Éric

Benacchio, Simon et Varoquaux, Arthur et Le Troter, Arnaud et Wagnac, Eric et Doutres, Olivier et Bendahan, David et Callot, Virginie et Sgard, Franck C.. 2017. « MRI investigation of the ear canal deformation due to earplugs: A first step toward understanding wearing comfort ». [Résumé d'un article de conférence]. Journal of the Acoustical Society of America, vol. 141, nº 5. p. 4024.

Bianco, Rohan-Jean et Arnoux, Pierre Jean et Wagnac, Éric et Mac-Thiong, Jean-Marc et Aubin, Carl-Éric. 2017. « Minimizing pedicle screw pullout risks: a detailed biomechanical analysis of screw design and placement ». Journal of Spinal Disorders and Techniques, vol. 30, nº 3. E226-E232.
Compte des citations dans Scopus : 4.

Facchinello, Yann et Wagnac, Éric et Ung, Bora et Petit, Yvan et Pradhan, Prabin et Peyrache, Louis-Marie et Mac-Thiong, Jean-Marc. 2017. « Development of an instrumented spinal cord surrogate using optical fibers: A feasibility study ». Medical Engineering and Physics.
(Sous presse)

Facchinello, Yann et Wagnac, Eric et Ung, Bora et Petit, Yvan et Pradhan, Prabin et Peyrache, Louis-Marie et Mac-Thiong, Jean-Marc. 2017. « Instrumented spinal cord surrogate using optical fiber: role of the fiber's location ». In IASTED International Conference on Biomedical Engineering (BioMed 2017) (Innsbruck, Austria, Feb. 20-21, 2017), p. 229-232. ACTA Press.

Weiss, Julien

Jourdain, Cyprien et Weiss, Julien et Seers, Patrice. 2017. « Comparison of image preprocessing methods for fuel droplet characterization ». In 47th AIAA Thermophysics Conference (Denver, CO, USA, June 05-09, 2017) Coll. « AIAA Paper », vol. AIAA 2017-4350. AIAA.

Le Floch, Arnaud et Mohammed-Taifour, Abdelouahab et Weiss, Julien. 2017. « Investigation of the low-frequency breathing motion in two turbulent separation bubbles ». In 47th AIAA Fluid Dynamics Conference (Denver, CO, USA, June 05-09, 2017) Coll. « AIAA Paper », vol. AIAA 2017-3970. AIAA.

Toledano, Alvaro et Morency, François et Weiss, Julien et Broughton, Cabot et Benmeddour, Ali. 2017. « Study of the subsonic wall interference in stall of the NASA CRM at the NRC 1.5 m trisonic wind tunnel ». In 33rd AIAA Aerodynamic Measurement Technology and Ground Testing Conference (Denver, CO, USA, June 05-09, 2017) Coll. « AIAA Paper », vol. AIAA 2017-4130. AIAA.

Velazquez, Oliverio E. et Weiss, Julien et Morency, François. 2017. « Preliminary investigation on stall characteristics of a regional BWB for low speed approach ». In 35th AIAA Applied Aerodynamics Conference (Denver, CO, USA, June 05-09, 2017) Coll. « AIAA Paper », vol. AIAA 2017-3738. AIAA.

Weiss, Julien et Jondeau, Emmanuel et Giani, Alain et Charlot, Benoit et Combette, Philippe. 2017. « Static and dynamic calibration of a MEMS calorimetric shear-stress sensor ». Sensors and Actuators, A: Physical, vol. 265. p. 211-216.

Weiss, Julien et Schwaab, Quentin et Boucetta, Yacine et Giani, Alain et Guigue, Celine et Combette, Philippe et Charlot, Benoit. 2017. « Simulation and testing of a MEMS calorimetric shear-stress sensor ». Sensors and Actuators, A: Physical, vol. 253. p. 210-217.

Wong, Tony

Machetto, Antoine et Communier, David et Botez, Ruxandra et Carranza Moyao, Oscar et Wong, Tony. 5 Avril 2017. « Automating Wing Angle Changes inside the LARCASE Price – Païdoussis Wind Tunnel ». [Research Paper Introduction]. Substance ÉTS.

Machetto, Antoine et Communier, David et Botez, Ruxandra et Carranza Moyao, Oscar et Wong, Tony. 5 Avril 2017. « Automatisation du changement d’angle d’une aile dans la soufflerie Price – Païdoussis du LARCASE ». [Research Paper Introduction]. Substance ÉTS.

Woodward, Lyne

Kebir, Anouer et Woodward, Lyne et Akhrif, Ouassima. 2017. « Extremum-seeking control with adaptive excitation: application to a photovoltaic system ». IEEE Transactions on Industrial Electronics.
(Sous presse)

Zednik, Ricardo

Boivin, Guillaume et Bélanger, Pierre et Zednik, Ricardo J.. 2017. « Torsional piezoelectric strain in monocrystalline paratellurite ». In International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) Coll. « Materials Science Forum », vol. 879. , p. 637-641. Trans Tech Publications.

de Castilla, Hector et Bélanger, Pierre et Zednik, Ricardo J.. 2017. « Dynamic piezoelectric behavior of lithium niobate at high temperature ». In International Conference oN Processing and Manufacturing Of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016) Coll. « Materials Science Forum », vol. 879. , p. 408-412. Trans Tech Publications.

Zhani, Mohamed Faten

Aloulou, Narjes et Ayari, Mouna et Zhani, Mohamed Faten et Saidane, Leila et Pujolle, Guy. 2017. « Effective controller placement in controller-based Named Data Networks ». In 2017 International Conference on Computing, Networking and Communications (ICNC) (Silicon Valley, CA, USA, Jan. 26-29, 2017), p. 249-254. Piscataway, NJ, USA : IEEE.

Dieye, Mouhamad et Zhani, Mohamed Faten et Elbiaze, Halima. 2017. « On achieving high data availability in heterogeneous cloud storage systems ». In IFIP/IEEE International Symposium on Integrated Network Management (IM) (Lisbon, Portugal, May 08-12, 2017), p. 326-334. Piscataway, NJ, USA : IEEE.

Elkhatib, Yehia et Porter, Barry et Ribeiro, Heverson B. et Zhani, Mohamed Faten et Qadir, Junaid et Rivière, Etienne. 2017. « On using micro-clouds to deliver the fog ». IEEE Internet Computing, vol. 21, nº 2. p. 8-15.

Racheg, Walid et Ghrada, Nadir et Zhani, Mohamed Faten. 2017. « Profit-driven resource provisioning in NFV-based environments ». In IEEE International Conference on Communications (ICC) (Paris, France, May 21-25, 2017) Piscataway, NJ, USA : IEEE.

de Guise, Jacques A.

Aubert, B. et Vidal, P. A. et Parent, S. et Cresson, T. et Vazquez, C. et De Guise, J.. 2017. « Convolutional neural network and in-painting techniques for the automatic assessment of scoliotic spine surgery from biplanar radiographs ». In Medical Image Computing and Computer-Assisted Intervention : MICCAI 2017 : 20th International Conference, Quebec City, QC, Canada, September 11-13, 2017 : Proceedings : Part II (Quebec City, QC, Canada, Sept. 11-13, 2017) Coll. « Lecture Notes in Computer Science », vol. 10434. , p. 691-699. Springer Verlag.

Bahig, Houda et Campeau, Marie-Pierre et Lapointe, Andréanne et Bedwani, Stephane et Roberge, David et de Guise, Jacques et Blais, Danis et Vu, Toni et Lambert, Louise et Chartrand-Lefebvre, Carl et Lord, Martin et Filion, Edith. 2017. « Phase 1-2 study of dual-energy computed tomography for assessment of pulmonary function in radiation therapy planning ». International Journal of Radiation Oncology Biology Physics, vol. 99, nº 2. p. 334-343.

Bahig, Houda et Nguyen-Tan, Phuc Félix et Filion, Édith et Roberge, David et Thanomsack, Pensavan et de Guise, Jacques A. et Blais, Danis et Doucet, Robert et Létourneau-Guillon, Laurent et Lambert, Louise. 2017. « Larynx motion considerations in partial larynx volumetric modulated arc therapy for early glottic cancer ». Journal of Medical Imaging and Radiation Oncology, vol. 61, nº 5. p. 666-673.

Chartrand, Gabriel et Cresson, Thierry et Chav, Ramnada et Gotra, Akshat et Tang, An et de Guise, Jacques A.. 2017. « Liver segmentation on CT and MR using Laplacian mesh optimization ». IEEE Transactions on Biomedical Engineering, vol. 64, nº 9. p. 2110-2121.

Clément, Julien et Dumas, Raphaël et Hagemeister, Nicola et de Guise, Jacques A.. 2017. « Can generic knee joint models improve the measurement of osteoarthritic knee kinematics during squatting activity? ». Computer Methods in Biomechanics and Biomedical Engineering, vol. 20, nº 1. p. 94-103.

Desbois, Adrien et Matei, Svetlana et Beguet, Florian et Perreault, Isabelle et Gervais, Sylvie et de Guise, Jacques. 2017. « The importance of a 3D-Based approach with personalized models for accurately assessing TBSA ». Journal of Burn Care and Research.
(Sous presse)

Gotra, Akshat et Chartrand, Gabriel et Vu, Kim-Nhien et Vandenbroucke-Menu, Franck et Massicotte-Tisluck, Karine et de Guise, Jacques A. et Tang, An. 2017. « Comparison of MRI- and CT-based semiautomated liver segmentation: a validation study ». Abdominal Radiology, vol. 42, nº 2. p. 478-489.

Gotra, Akshat et Sivakumaran, Lojan et Chartrand, Gabriel et Vu, Kim-Nhien et Vandenbroucke-Menu, Franck et Kauffmann, Claude et Kadoury, Samuel et Gallix, Benoît et de Guise, Jacques A. et Tang, An. 2017. « Liver segmentation: indications, techniques and future directions ». Insights into Imaging, vol. 8, nº 4. p. 377-392.

Mahvash Mohammadi, Hossein et de Guise, Jacques A.. 2017. « Enhanced X-ray image segmentation method using prior shape ». IET Computer Vision, vol. 11, nº 2. p. 145-152.

Mezghani, Neila et de Guise, Jacques et Grimard, Guy et Baillargeon, David et Youssef, Ouakrim et Parent, Gérald et Fuentes, Alexandre et Lavigne, Patrick et Ranger, Pierre (inventeurs) 3 Janvier 2017. « Method and system for knee joint evaluation and diagnostic aid in normal and pathologic state ». Emovi Inc. (titulaire(s)). Brevet américain US 9,532,732.

Mezghani, Neila et Ouakrim, Youssef et Fuentes, Alexandre et Mitiche, Amar et Hagemeister, Nicola et Vendittoli, Pascal-André et de Guise, Jacques A.. 2017. « Mechanical biomarkers of medial compartment knee osteoarthritis diagnosis and severity grading: Discovery phase ». Journal of Biomechanics, vol. 52. p. 106-112.

Zeighami, A. et Dumas, R. et Kanhonou, M. et Hagemeister, N. et Lavoie, F. et de Guise, J. A. et Aissaoui, R.. 2017. « Tibio-femoral joint contact in healthy and osteoarthritic knees during quasi-static squat: A bi-planar X-ray analysis ». Journal of Biomechanics, vol. 53. p. 178-184.

Éthier, Yannic A.

Dumberry, Kevin et Duhaime, François et Éthier, Yannic. 2017. « Erosion monitoring during core overtopping using a laboratory model with digital image correlation and X-ray microcomputed tomography ». Canadian Geotechnical Journal = Revue Canadienne de Géotechnique.
(Sous presse)

Cette liste a été générée le Fri Dec 15 12:21:49 2017 EST.