relation: https://espace2.etsmtl.ca/id/eprint/27857/
title: Influence of oxygen content in the protective gas on pitting corrosion resistance of a 316l stainless steel weld joint
creator: Maroufkhani, Mohammad
creator: Hakimian, Soorosh
creator: Khodabandeh, Alireza
creator: Radu, Iulian
creator: Hof, Lucas A.
creator: Jahazi, Mohammad
description: Gas tungsten arc welding (GTAW) is commonly used for joining pipelines; however, it  often leads to discoloration in the heat-affected zone (HAZ). In this study, 316L pipes were welded  with different concentrations of oxygen present in the argon purge gas during welding. The objective  of this study was to investigate the effect of oxygen concentration in the protective gas on the pitting  corrosion resistance of welded pipes. The experimental results showed that the thickness of the oxide  layer formed in the HAZ depends on the concentration of oxygen in the protective gas. Increasing  the oxygen concentration in the protective gas resulted in an increase in pitting corrosion resistance  until a critical value, beyond which the resistance decreased. The results showed that the thickness  of the oxide layer formed in the HAZ depends on the concentration of oxygen in the protective gas.  Increasing the oxygen concentration in the protective gas increased the pitting corrosion resistance  until a critical value, beyond which the resistance decreased due to the formation of iron oxide. This  study provides valuable insights for improving the corrosion resistance of welded pipes in the oil  and gas industry.
publisher: Multidisciplinary Digital Publishing Institute
date: 2023
type: Article publié dans une revue, révisé par les pairs
type: Non évalué par les pairs
format: application/pdf
language: en
rights: cc_by
identifier: https://espace2.etsmtl.ca/id/eprint/27857/1/Hof-L-2023-27857.pdf
identifier:   Maroufkhani, Mohammad, Hakimian, Soorosh, Khodabandeh, Alireza, Radu, Iulian, Hof, Lucas A. et Jahazi, Mohammad.   2023.  « Influence of oxygen content in the protective gas on pitting corrosion resistance of a 316l stainless steel weld joint ».  Materials, vol. 16, nº 17.     Compte des citations dans Scopus : 1.     
relation: https://doi.org/10.3390/ma16175968
relation: 10.3390/ma16175968
identifier: 10.3390/ma16175968