ENGLISH |
Liste des publications de "Lalonde, Sébastien"Nombre de documents archivés : 21. Article publié dans une revue, révisé par les pairs
Guilbault, Raynald et Lalonde, Sébastien.
2019.
« A stochastic prediction of roughness evolution in dynamic contact modelling applied to gear mild wear and contact fatigue ».
Tribology International, vol. 140.
Guilbault, Raynald et Lalonde, Sébastien.
2016.
« Early diagnostic of concurrent gear degradation processes progressing under time-varying loads ».
Mechanical Systems and Signal Processing, vol. 76-77.
pp. 337-352.
Guilbault, Raynald et Lalonde, Sébastien.
2021.
« Tip relief designed to optimize contact fatigue life of spur gears using adapted PSO and firefly algorithms ».
SN Applied Sciences, vol. 3, nº 1.
Guilbault, Raynald, Lalonde, Sebastien et Thomas, Marc.
2013.
« Corrigendum to "Nonlinear damping calculation in cylindrical gear dynamic modeling" [J. Sound Vib. 331/9 (2012) 2110–2128] ».
[Autre]. Journal of Sound and Vibration, vol. 332, nº 20.
p. 5240.
Guilbault, Raynald, Lalonde, Sébastien et Thomas, Marc.
2015.
« Modeling and monitoring of tooth fillet crack growth in dynamic simulation of spur gear set ».
Journal of Sound and Vibration, vol. 343.
pp. 144-165.
Guilbault, Raynald, Lalonde, Sébastien et Thomas, Marc.
2012.
« Nonlinear damping calculation in cylindrical gear dynamic modeling ».
Journal of Sound and Vibration, vol. 331, nº 9.
pp. 2110-2128.
Lalonde, Sébastien et Guilbault, Raynald.
2009.
« Finite separation method : an efficient boundary element crack modeling technique ».
Computational Mechanics, vol. 44, nº 6.
pp. 791-807.
Lalonde, Sébastien et Guilbault, Raynald.
2011.
« Prediction of thin-rimmed gear crack propagation from a factorial design approach ».
Fatigue and Fracture of Engineering Materials and Structures, vol. 34, nº 7.
pp. 470-486.
Lalonde, Sébastien, Guilbault, Raynald et Langlois, Sébastien.
2017.
« Modeling multilayered wire strands, a strategy based on 3D finite element beam-to-beam contacts - Part II: Application to wind-induced vibration and fatigue analysis of overhead conductors ».
International Journal of Mechanical Sciences, vol. 126.
pp. 297-307.
Lalonde, Sébastien, Guilbault, Raynald et Langlois, Sébastien.
2018.
« Numerical analysis of ACSR conductor-clamp systems undergoing wind-induced cyclic loads ».
IEEE Transactions on Power Delivery, vol. 33, nº 4.
pp. 1518-1526.
Lalonde, Sébastien, Guilbault, Raynald et Légeron, Frédéric.
2017.
« Modeling multilayered wire strands, a strategy based on 3D finite element beam-to-beam contacts - Part I: Model formulation and validation ».
International Journal of Mechanical Sciences, vol. 126.
pp. 281-296.
Omrani, Amine, Langlois, Sebastien, Van Dyke, Pierre, Lalonde, Sebastien, Karganroudi, Sasan Sattarpanah et Dieng, Lamine.
2021.
« Fretting fatigue life assessment of overhead conductors using a clamp/conductor numerical model and biaxial fretting fatigue tests on individual wires ».
Fatigue and Fracture of Engineering Materials and Structures, vol. 44, nº 6.
pp. 1498-1514.
Rocha, P. H. C., Langlois, S., Lalonde, S., Araújo, J. A. et Castro, F. C..
2022.
« A general life estimation method for overhead conductors based on fretting fatigue behavior of wires ».
Theoretical and Applied Fracture Mechanics, vol. 121.
Rocha, P. H. C., Langlois, S., Lalonde, S., Araujo, J. A. et Castro, F. C..
2023.
« Influence of 1350 and 6201 aluminum alloys on the fatigue life of overhead conductors – A finite element analysis ».
Tribology International, vol. 186.
Compte rendu de conférence
Kared, Liticia, Lalonde, Sébastien, Langlois, Sébastien et Guilbault, Raynald.
2024.
« Numerical characterization of overhead conductor local loading conditions at wire contact points in the vicinity of suspension clamps ».
In Dynamics and Aerodynamics of Cables - ISDAC (Rome, Italy, June 15-17, 2023)
Coll. « Lecture Notes in Civil Engineering », vol. 399.
pp. 327-338.
Springer Science and Business Media Deutschland GmbH.
Lalonde, Sébastien et Guilbault, Raynald.
2008.
« A new and efficient approach for boundary element 2D crack modeling ».
In Canadian Society for Mechanical Engineering Forum (CSME) (Ottawa, ON, Canada, June 5-8, 2008)
Lalonde, Sébastien et Guilbault, Raynald.
2006.
« Dynamic analysis of spur gears by non linear modeling ».
In Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montreal, QC, Canada, Oct. 25-27, 2006)
pp. 15-35.
Calgary : ACVM.
Lalonde, Sébastien et Guilbault, Raynald.
2009.
« Numerical characterization of thin-rimmed gear tooth bending fatigue crack propagation ».
In 12th International Conference on Fracture 2009, ICF-12 (Ottawa, ON, Canada, July 12-17, 2009)
pp. 5827-5836.
Japan : International Congress on Fracture.
Lalonde, Sébastien, Kared, Liticia, Guilbault, Raynald et Langlois, Sébastien.
2024.
« 3D finite element modelling of conductor-clamp assemblies under cyclic bending: Sensitivity analysis of wire contact coefficient of friction ».
In Dynamics and Aerodynamics of Cables - ISDAC (Rome, Italy, June 15-17, 2023)
Coll. « Lecture Notes in Civil Engineering », vol. 399.
pp. 315-326.
Springer Science and Business Media Deutschland GmbH.
Omrani, Amine, Langlois, Sébastien, Van Dyke, Pierre, Sattarpanah Karganroudi, Sasan et Lalonde, Sébastien.
2019.
« Fatigue strength evaluation for individual strands of overhead conductors using a biaxial fretting fatigue test bench ».
In 12th International Conference on Multiaxial Fatigue and Fracture (ICMFF) (Bordeaux, France, June 24-26, 2019)
Coll. « MATEC Web of Conferences », vol. 300.
EDP Sciences. CommunicationRocha, P. H. C., Langlois, S., Lalonde, S., Araujo, J. A. et Castro, F. C.. 2022. « Life prediction of an ACSR conductor based on the similitude with fretting fatigue tests on wires ». Communication lors de la conférence : 10th International Symposium on Fretting Fatigue (ISFF10) (Louvain, Belgique, Sept. 19-21, 2022). |