FRANÇAIS
A showcase of ÉTS researchers’ publications and other contributions
SEARCH

Analysis of macrosegregation in large size forged ingot of high strength steel

Loucif, Abdelhalim, Fredj, Emna Ben, Jahazi, Mohammad, Lapierreboire, Louis-Philippe, Tremblay, Rami and Beauvais, Raymond. 2015. « Analysis of macrosegregation in large size forged ingot of high strength steel ». In Proceedings of the 6th International Congress on the Science and Technology of Steelmaking (ICS 2015) (Beijing, China, May 12-14, 2015) pp. 1043-1046. Chinese Society for Metals.
Compte des citations dans Scopus : 11.

[thumbnail of Jahazi-M-2015-12947.pdf]
Preview
PDF
Jahazi-M-2015-12947.pdf - Accepted Version
Use licence: All rights reserved to copyright holder.

Download (476kB) | Preview

Abstract

The macrosegregation levels of C, Mn, Ni, Cr and V were evaluated experimentally in in large size forging made of high strength steel. The analysis was performed on a 2 cm thick slice cut along the longitudinal axis of a medium carbon steel bloc which has undergone casting, forging and heat treatment. The slice was then cut into small specimens. Chemical analysis was carried out on these specimens to obtain the chemical map of the different elements. Analysis of the macrosegregation mapping revealed the existence of positive and negative segregation types. The most segregated elements were C for positive segregation and Cr for negative segregation. V and Ni did not present an important segregation degree. Microstructure examination using optical microscopy revealed mostly a bainitic structure. The presence of retained austenite was not detected. Hardness measurements in two samples having high and low levels of macrosegregation did not reveal major differences.

Item Type: Conference proceeding
Professor:
Professor
Jahazi, Mohammad
Affiliation: Génie mécanique
Date Deposited: 06 Jul 2016 12:53
Last Modified: 13 Apr 2023 16:08
URI: https://espace2.etsmtl.ca/id/eprint/12947

Actions (login required)

View Item View Item