Extended state observer–based improved non-singular fast terminal sliding mode for mobile manipulators

Algrnaodi, Mhmed, Saad, Maarouf, Saad, Mohamad, Fareh, Raouf et Kali, Yassine. 2023. « Extended state observer–based improved non-singular fast terminal sliding mode for mobile manipulators ». Transactions of the Institute of Measurement and Control.
Compte des citations dans Scopus : 1. (Sous presse)

Prévisualisation

PDF Saad-M-2023-27437.pdf - Version publiée Licence d'utilisation : Creative Commons CC BY-NC. Télécharger (3MB) | Prévisualisation

Résumé

The robust non-singular fast terminal sliding mode (NFTSM) controller is adopted in this work to solve the problem of tracking trajectory of a mobile manipulator (MM) suffering from uncertainties. The NFTSM method has the capability to ensure convergence rate and to provide good tracking accuracy and robustness against external perturbations and parameter uncertainties (total disturbances). However, the NFTSM controller needs high discontinuous gain to reject the effect of strong disturbances, which results in vibrations in the steady-state and chattering in the control law. To solve these issues, an extended state observer–based NFTSM technique is proposed for n-degree of freedom (DoF) coupling MM. The proposed method is designed to approximate and compensate in real-time the uncertainties. It also ensures robustness against total disturbances, good convergence rate, and good tracking accuracy. The stability of the proposed control is also verified based on the Lyapunov theory. Experimental works are conducted on a 5-degree-of-freedom (5-DoF) MM where the results obtained demonstrate the effectiveness of the developed technique and prove the stability of the closed-loop system.

Type de document:	Article publié dans une revue, révisé par les pairs
Professeur:	Professeur Saad, Maarouf
Affiliation:	Génie électrique
Date de dépôt:	22 août 2023 14:39
Dernière modification:	16 oct. 2023 19:09
URI:	https://espace2.etsmtl.ca/id/eprint/27437

Actions (Authentification requise)

Dernière vérification avant le dépôt