Actes de la conférence CSME-CFDSC-CSR 2025 International Congress Le Congrès international CSME CFDSC CSR 2025 s’est tenu à Montréal, à l’École de technologie supérieure (ÉTS), du 25 au 28 mai 2025. Ce congrès annuel était une initiative conjointe des Sociétés canadiennes de génie mécanique (SCGM), de dynamique des fluides numérique (CFDSC) et de rhéologie (CSR). Cette conférence a offert une occasion stimulante pour les communautés du génie mécanique, de la dynamique des fluides numériue et de la rhéologie au Canada et à l’étranger. Étudiants, professeurs, leaders industriels et chercheurs gouvernementaux se sont réunis pour échanger sur les résultats de recherche et les défis technologiques, favoriser de nouvelles collaborations scientifiques et renforcer le sentiment d’appartenance à la communauté.
Le congrès a atteint un record de participants avec près de 800 congressistes provenant de 10 pays, présentant près de 600 résumés ou articles évalués par les pairs, dont 20 conférenciers invités, répartis dans 23 symposiums au cours des trois journées complètes de l’événement.

Compte rendu de conférence

Adelusi, Oluwaseunnla P., Boulet, Micaël et Moreau, Stéphane. 2025. « Thermogravimetric analysis of refuse-derived fuel and its sorted fractions under torrefaction conditions ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Afsharpanah, Farhad, Izadi, Masoud, Ajarostaghi, Seyed Soheil Mousavi, Poncet, Sébastien et Amiri, Leyla. 2025. « Advancing the freezing rate in a triplex-tube ice storage unit using axial bent fins ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Ajarostaghi, Seyed Soheil Mousavi, Amiri, Leyla et Poncet, Sébastien. 2025. « Experimental verification of a local thermal non-equilibrium model for a horizontal cylindrical magnetite-based rock bed as a thermal battery ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Akhand, Aamer, Wu, Xiaoyu et Pirnia, Mehrdad. 2025. « Comparing hydrogen infrastructure implementation of homes and fuel cell truck fleets ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Akhtar, Tayyab Tahir, Moreau, Stephane, Demory, Bruno et Henner, Manuel. 2025. « Effect of rotor solidity on the aeroacoustics behaviour of automotive cooling fan module ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Akopyan, Ekaterina, Bordatchev, Evgueni et Tutunea-Fatan, O. Remus. 2025. « Analysis of topography formation during surface structuring by laser remelting ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Ali, Md Sujaat, Trépanier, Jean-Yves et Leclaire, Sébastien. 2025. « A sharp interface immersed boundary approach for simplified and highly stable lattice Boltzmann method ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Alkassas, Omar, Ny, Jerome Le et Yacout, Soumaya. 2025. « A systematic literature review of self-healing mechanisms in cyber-physical systems: Application to robotic manipulators ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Alladini, Nahid, Wuthrich, Rolf et Hof, Lucas. 2025. « Using random forest feature importance to rank environmental factors affecting PV degradation rates ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Andrade, Gino J.a. De, Groulx, Dominic et Silva, W.b. Da. 2025. « Estimation of arc efficiency in arc welding using temperature measurements ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Appia, Christian et Songmene, Victor. 2025. « Reduction of fine and ultrafine particles by water: Application to the machining of dusty materials ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Ardakani, Mohsen Masoomi et Yang, Jianming. 2025. « Data-driven feature selection for prediction of wind turbine vibrations ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Asgari, Ehsan, Saeedi, Mohammad, Dastgerdi, Jairan Nafar et Nasiri, Ali. 2025. « Numerical analysis of heat-generating terms in the energy equation for wire arc additive manufacturing ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Babin, William, Joubair, Ahmed et Tahan, Souheil-Antoine. 2025. « Experimental repeatability assessment of a metrology-assisted robotic assembly system using iGPS tracking ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Beitollahi, Armin, Alamdari, Houshang et Taghavi, Seyed Mohammad. 2025. « Capillary flow of highly viscous shear-thinning fluids into irregular microchannels ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Bérubé, Pascal, Rancourt, Pr David et Blouin, Charles. 2025. « Development of a low cost characterization method for drone-scale aircraft electric motors ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Boccanfuso, Robert et Minaker, Bruce. 2025. « Evaluation of braking strategies for collision avoidance ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Boniface Awatcha, Willy, Nadeau, Sylvie et Hof, Lucas. 2025. « Circular economy in automotive disassembly: Challenges and opportunities for end-of-life vehicles ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montréal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Branje, Melanie, Sadeghieh, Mehrdad, Kishawy, Hossam, MacDonald, Brendan et Hosseini, Ali. 2025. « Jerk-limited profiles for a grooved cam to operate a Stirling engine displacer piston ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Breton, Ismaël, Campeau-Lecours, Alexandre et Bouffard, Jason. 2025. « Design and development of SIARA 2: A low-cost assistive robotic arm for individuals with upper body disabilities ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Cakir, Efe et Dumond, Patrick. 2025. « A comparative analysis of reinforcement learning and conventional deep learning approaches for bearing fault diagnosis ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Carlier, Florian, Kenné, Jean-Pierre et Hof, Lucas. 2025. « Performance analysis of UWB localization in multi-floor industrial scenarios ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Chander, Subhash et Kumar, Neeraj. 2025. « Non-boiling heat transfer characteristics of water sprays impinging on a heated surface ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Chen, Nuo et Pan, Ya-Jun. 2025. « Haptic robotic hand design and control with neural-network based system identification ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Chen, Yu-Tung et Behdinan, Kamran. 2025. « The impact of membrane thickness on IPMC actuation dynamics: A simulation study ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Cheng, Ye, Bucknor, Norman et Raghavan, Madhu. 2025. « Pack and vehicle level impacts of high C-rate cells for fast charging ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Cheung, Mattias K., Ahmadfard, Mohammadamin et Dworkin, Seth B.. 2025. « Analytical simulation of the thermal behaviour of parallel-series configurations of helical steel piles ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Chheang, Sopheakreach, Cree, Duncan et Wiens, Travis. 2025. « Weibull analysis of the effect of deposition temperature and number of layers on strength of fused deposition modeling plastics ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Chhetri, Ashim, Hammond, Keziah Naa Densua, Kodie-Ampaw, Joseph Kwabena, Bonsi, Adime Kofi et Essel, Ebenezer Ekow. 2025. « Effect of partial sheltering on spanwise wake interference of unequal-height tandem circular cylinders ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Clancy, Kaitlyn, Xie, Siwen, Smith, Griffin et Onaizah, Onaizah. 2025. « Automated fabrication of magnetic soft microrobots ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Coker, Anirejuoritse, Bordatchev, Evgueni et Tutunea-Fatan, O. Remus. 2025. « Analysis of temperature evolution along scanning trajectory during laser remelting ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Collings, William, Schwarz, Jackson, Bakis, Charles E., El-Sayegh, Zeinab et El-Gindy, Moustafa. 2025. « Finite element modelling of a non-pneumatic tire's spoke ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Corbett, Finley, Jeans, Tiger et Gerber, Andrew. 2025. « A computational study investigating the influence a co-rotating hub retrofit has on tidal turbine performance ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Cornejo, Gonzalo et Lange, Carlos. 2025. « Searching for key variables influencing upstream building effects in urban CFD simulations ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Cunha, Baptiste et Seers, Patrice. 2025. « Effect of EGR direct-injection on the resulting flow and stratification in a spark-ignition engine using CFD ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Czekanski, Aleksander et Etiwa, Ragab. 2025. « Effect of raster angles on the anisotropic behavior of 3D-printed TPU under uniaxial and planar loading conditions ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Dadpour, Daryoush, Deymi-Dashtebayaz, Mahdi, Poncet, Sébastien, Agelin-Chaab, Martin, Hangan, Horia et Peerhossaini, Hassan. 2025. « Energy, exergy, and exergoeconomic analyses of solar-powered cooling systems for data centers in Montreal: A comparative study of three phase change materials ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Daoud, Ahmed, Oukassi, Hedir, Aidibe, Ali et Yacout, Soumaya. 2025. « Cyber-physical system architecture for real-time warehouse operations ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Darbandi, Masoud, Amarloo, Mahdiyar, Jalali-zeydanlu, Mohammad, Ameli-Bidar, Mostafa, Jalali, Ramin et Schneider, Gerry E.. 2025. « Evaluating the influences of complementary corrections/adjustments on improving the accuracy of BEMT in large-scale wind turbine power prediction ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Deng, Guang C., Baba, Satoshi, Ben-Gida, Hadar, Lavoie, Philippe et Moreau, Stéphane. 2025. « Computational investigation of strain-vorticity interactions in wingtip vortex formation ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Di Labbio, Giuseppe, Hof, Lucas, Chaouki, Haitam et Lessard, Michel. 2025. « AI-driven modelling of electrostatic powder coating: Data collection ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Di Liddo, Anthony, Ahmadfard, Mohammadamin et Dworkin, Seth. 2025. « Modelling thermal performance of helical steel piles ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Dors, Thomas M. R. et Groth, Clinton P. T.. 2025. « Large-eddy simulation of low- and high-speed turbulent flows using a high-order CENO finite-volume scheme ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Dorugade, Darshan Vishnu, Rakheja, Subhash, Boileau, Paul-Émile, Zheng, Zhou et Yao, Yumeng. 2025. « Analysis of influence air spring mount bending on seat suspension performance ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Drai, Jeffrey et Czekanski, Aleksander. 2025. « A bibliometric examination of the existing knowledge framework and advancements in vascular network engineering ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Drai, Jeffrey et Czekanski, Aleksander. 2025. « Exploring challenges and solutions in hydrogel failure and fracture mechanics for advancing vascular tissue engineering ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Du, Haoran, Savory, Eric et Perret, Laurent. 2025. « Characteristics of street canyon flow using large-eddy simulation with a drag-porosity modelled atmospheric boundary layer ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Durand, Sullivan, Neveu, Pierre, Rousse, Daniel R. et Haillot, Didier. 2025. « Comparative study of the discharge architecture for a multi-energy pumped thermal energy storage system using finite dimension thermodynamics ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Dutta, Arnab, Torabi, Hadis et Behzadfar, Ehsan. 2025. « Rheological behavior of starch-grafted itaconic acid co-acrylamide polymers ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Elhemmali, Alaaeddin, Huque, Mohammad Mojammel, Imtiaz, Syed, Azizur-Rahman, Mohammad et Ahmed, Salim. 2025. « Experimental validation of pressure drop in turbulent annular flow using CFD and physical informed neural networks ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Fan, Zichen, Hadizade, Amin, Degroot, Christopher et Savory, Eric. 2025. « Characterization of cough mouth opening for accurate CFD boundary conditions ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Faramarzi, Mohsen et Taghavi, Seyed Mohammad. 2025. « Buoyant miscible suspension fluid injection into a closed-end pipe ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Fenton, Erin et El-Sayegh, Zeinab. 2025. « Modeling and analyzing tire-salted pavement interaction using advanced computational techniques ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Franco, Felipe M. et Czekanski, Aleksander. 2025. « Impact analysis on non-planar 3D-printed FFF parts ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Fritz, Joshua, Gordon, William, Oliva, Jennifer, Tutunea-Fatan, O. Remus et Bordatchev, Evgueni. 2025. « Functional performance of rectangular riblet-structured surfaces in water-glycerol mixture: Effect of riblet height ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Gahlawat, Vijeet, Aidibe, Ali, Pilani, Nekkunj, Saucier, Antoine et Yacout, Soumaya. 2025. « A comparative analysis of Kafka and MQTT for real-time data streaming in cyber-physical warehouse system ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Ganji, Mohammad J., Agelin-Chaab, Martin et Rosen, Marc A.. 2025. « Incorporating copper wire mesh into a PCM-based battery pack ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Gauthier, Jean-Philippe, Morissette, Jean-François et Lawrence, Michel. 2025. « Assessment of risks related to hydraulic transients in the context of hydro turbine uprating using co-simulation ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Ghalati, Akbar Ravan, Nesreddine, Hakim, Lacey, Jay et Poncet, Sebastien. 2025. « Scale-resolving simulation of a water jet pump ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Ghorbani, Nima, Khayyaminejad, Amirhossein, Shabestari, Mahdiyar Khalilzade et Fartaj, Amir. 2025. « Geometrical investigation of solar chimney with PCM-integrated Trombe wall for enhanced thermal comfort and energy efficiency ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Gilani, Ryid et Ghasemi, Abbas. 2025. « Large eddy simulations of freely evolving and colliding human exhalation flows ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Goodarzi, Fahimeh, Di Labbio, Giuseppe et Mani, Mahmoud. 2025. « Unsteady wake characteristics of a plunging airfoil at post-stall conditions ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Goudarzi, Sahar, Muzychka, Yuri et Naterer, Greg. 2025. « Conjugate heat transfer and freezing of impinging droplets on coated steel substrates ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Groth, Clinton P. T: et Binato, Stefano. 2025. « Large-eddy simulation of turbulent premixed hydrogen-air Bunsen flames using PCM-FPI combustion model ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Gu, Jinyu, Wang, Yingjun et Xu, Hang. 2025. « Fatigue damage constrained topology optimization for thermo-mechanical loading ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Hameury, Celia, Ferrari, Giovanni et Amabili, Marco. 2025. « Experimental testing of four different active vibration controllers on a clamped sandwich beam with nonlinear vibrations ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Harker, Matthew. 2025. « Least-squares reconstruction of a 3D potential from its measured spatial velocity field ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Hassanzadeh, Hossein, Banda, Mariana Cruz et Taghavi, Seyed Mohammad. 2025. « Exploring miscible jet dynamics in complex fluids ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Hernandez, Diego, MacLean, Allyson et Dumond, Patrick. 2025. « Mechanical pollination of strawberry plants ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Hiol, Ralph Kinte Pouhe et Sanjose, Marlène. 2025. « Aeroacoustic analysis in a tail rotor configuration using large eddy simulations and Ffowcs Williams and Hawkings’ analogy ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Hosseini, Faezeh, Asad, Asad et Yakout, Mostafa. 2025. « Effect of laser powder bed fusion process parameters on microstructure and coefficient of thermal expansion of Al6061 ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Hosseini, Seyed Hamed Seyed, Hajzargarbashi, Seyedhossein et Liu, Zhaoheng. 2025. « Vibration analysis of robot manipulators and Gaussian process regression for estimating posture-dependent FRF ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Hosseinnia, Seyed Mojtaba, Metsue, Antoine, Amiri, Leyla et Poncet, Sébastien. 2025. « Supercritical CO2 heat transfer enhancement in large diameter horizontal tubes by internal fins ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Hossen, Mohammed Khalid, Asgari, Ehsan, Saeedi, Mohammad et Nyantekyi-Kwakye, Baafour. 2025. « Large-eddy simulation of an offset jet flow over surface-mounted ribs ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Houria, Manel, Kaveh, Kianoosh, Morin, Jean-Benoit, Jahazi, Mohammad et Moosavi, Elmira. 2025. « Computational thermodynamics approach to overcoming challenges in high-nitrogen low-manganese stainless steel production ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Hsieh, Nathan, Guan, Aaron, Koul, Saraswati et Leung, Siu Ning (Sunny). 2025. « Design and fabrication of green polyester-based adhesives reinforced by bio-based nanoparticles ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Hu, Zhirou, Chen, Kuiying et Jin, Tao. 2025. « Phase-field crack simulation for thermomechanically coupled problems ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Hua, Zehui, Sehri, Mert et Dumond, Patrick. 2025. « Bearing fault diagnosis using text analysis on the CWRU dataset ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Huang, Yuhao, Jalayer, Shayan, Kim, Hansu, Huh, Jaesung et Kim, Il Yong. 2025. « Multi-stage topology optimization of electric motor for urban air mobility vehicle ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Hurtado, Arleth Suárez, Cordova, Angel Mora et Czekanski, Aleksander. 2025. « Magnetic field influence on the mechanical properties of 3D-printed magnetorheological composites ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Huynh, Liem, Chaudhry, Shubham, Holsworth, David et Vu, Viet-Hung. 2025. « Laser powder bed fusion optimal process window for tensile strength of Ti-6AL-4V ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Ibazebo, Ehidiame, Savsani, Vimal, Siddhpura, Arti, Siddhpura, Milind et Savsani, Poonam. 2025. « Enhanced failure mode effect analysis methodology in the risk assessment of marine machinery systems ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Jaber, Khodr, Essel, Ebenezer et Sullivan, Pierre. 2025. « Towards a GPU-native adaptive mesh refinement scheme for the lattice Boltzmann method in complex geometries ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Jafari, Moloud, Karganroudi, Sasan Sattarpanah, Rivest, Louis et Tahan, Souheil Antoine. 2025. « Empirical quantification of uncertainty in iGPS measurements for assembly operations ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Jafri, Ahmed, Dadpour, Daryoush, Agelin-Chaab, Martin, Hangan, Horia et Peerhossaini, Hassan. 2025. « Building energy estimation through experimental testing and simulation ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Jahanara, Hasti et Xu, Hang. 2025. « Semi-continuum robot with discrete quantized deformation of bistable metastructure ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Joulaei, Amir, Rahmani, Hossein et Taghavi, Seyed Mohammad. 2025. « AI-driven prediction of central plug morphology in Poiseuille flow of Bingham fluids with superhydrophobic walls ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Kafaei, Amir, Gosselin, Louis, Alamdari, Houshang Darvishi et Taghavi, Seyed Mohammad. 2025. « Fluid viscosity effects on carbon anode vibro-compaction ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Kalia, Nikhila, Mcconkey, Ryley, Yee, Eugene et Lien, Fue-Sang. 2025. « Bayesian optimization of the GEKO turbulence model for predicting flow separation over a smooth surface ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Kamdem, Brice Martial, Lemaire, Romain et Nikiema, Josiane. 2025. « Characterization of the physicochemical properties of densified fuels produced from the co-processing of sawdust, miscanthus, and wheat straw: Analysis of the impact of the compaction force, the particle size and the feedstock mixing ratio ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Keshavan, Kiran Purushothama, Ghareghani, Mohammadsadegh Moradi, Hosseinnouri, Farimah, Agelin-Chaab, Martin et Hangan, Horia. 2025. « Numerical and experimental investigation of snow accumulation on surfaces ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Khalilian, Niousha, Sehri, Mert, Hua, Zehui et Dumond, Patrick. 2025. « Bearing fault diagnosis using traditional machine learning via ChatGPT ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Khan, Irtiza, Corbett, Finley, Gerber, Andrew, Jeans, Tiger et Carretero, Juan. 2025. « Automated 3D propeller modeling for integration into a shape optimization workflow ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Khapra, Tarun, Beigpour, Reza, Dehghanpour, Sajjad et Altenhof, William. 2025. « Impact of lignin filler on mechanical properties and anisotropic behavior of compression moulded glass/polypropylene long fibre thermoplastics ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Kim, Daekeun, Urbanic, Jill et Carriveau, Rupp. 2025. « Plant companion lighting system to enhance energy efficient agriculture in remote regions ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Kodie-Ampaw, Joseph Kwabena, Bonsi, Adime Kofi et Essel, Ebenezer Ekow. 2025. « Unsteady wake characteristics of a notchback Ahmed body ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Le Floc'h, Arnaud, Hu, Nan, Suryadi, Alexandre et Herr, Michaela. 2025. « Evolution of wall pressure and wall shear stress under adverse pressure gradients from attached to separated flows ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Levere, Cole, Martinez, Kenneth, Vella, Mitchell, Varas, Nicholas et Seo, Jaho. 2025. « Development of an autonomous strawberry harvesting robot ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Li, Haining, Liu, Kefu, Hamsayeh, Erfan, Li, Leping et Xu, Jason. 2025. « Development of optimal lumped-parameter models for torsional vibration of shafts ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Li, Long, Pao, Wing Yi, Agelin-Chaab, Martin, Komar, John et Lang, Haoxiang. 2025. « Investigating automotive sensor perception in rain: A case study on TOF and FMCW LiDAR ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Li, Zhao, Chen, Kuiying et Jin, Tao. 2025. « Parallelized and adaptively refined phase-field monolithic scheme for brittle crack simulation ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Liogier, Louis, Henderson, Andrew et Hof, Lucas. 2025. « Life cycle assessment of the spark assisted chemical engraving (SACE) micro-machining method ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Liu, Wenjie, Rahmani, Hossein, Larachi, Faïçal et Taghavi, Seyed Mohammad. 2025. « Numerical analysis of buoyancy-driven immiscible exchange flows in axially rotating pipes ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Long, Da et Yang, Sheng. 2025. « Deep learning-based fatigue detection using kinematic information from videos ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8. https://doi.org/10.82417/6mtg-8x59 :

Luchini, Thibaud, Saillant, Maxime, Fotsing, Édith Roland, Tuysuz, Oguzhan et Ross, Annie. 2025. « A multidisciplinary method for simulation guided design of mechanical structures ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Madiega, Blaise, Olivier, Mathieu, Alahassa, Konrad Tagnon Amen et Brou, Christ-Marie Anzian. 2025. « Enhancing noisy PIV measurements through signal processing and machine learning techniques ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Maduche, Trish Anesu, Mongeau, Luc, Kronish, Amanda et Morales, Christopher. 2025. « Shape optimization of a quiet and efficient synthetic jet actuator enclosure using COMSOL Multiphysics ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Majdabadi, Mohammad Mahmoudi et Koohi-Fayegh, Seama. 2025. « Techno-economic assessment of dual-source heat pump systems: Borehole size reduction and life-cycle cost analysis across three cities in Canada ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Marcil-St-Onge, Gabriel, Chandoul, Abdelberi, Thomas, Yannig, Pelletier, Roger, Lefebvre, Louis-Philippe et Demers, Vincent. 2025. « Material extrusion additive manufacturing of aluminum-based feedstocks ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Martinez, Kenneth, Workman, Riley, Masud, Md Shafakat et Lang, Haoxiang. 2025. « GRASP-01: A low-cost 7 degree of freedom humanoid robotic arm ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Masud, Md Shafakat, Liu, Xiaolong, Martinez, Kenneth, Workman, Riley, Lang, Haxiang et Ren, Jing. 2025. « Development of AI-driven universal robot with vision perception for robotic manipulation ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Mateur, Wael, Songmene, Victor, Kouam, Jules et Bahloul, Ali. 2025. « Optimization of wet edge finishing of natural stones: Influence of tool geometry, grit size and cutting conditions ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Mehnatkesh, Hossein, Gordon, David et Koch, Charles Robert. 2025. « Temporal Kolmogorov-Arnold networks for control-oriented modeling of hydrogen/diesel dual-fuel engines ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Melly, Stephen et Czekanski, Aleksander. 2025. « Evaluating viscous potential function for rate sensitivity in soft materials ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Melly, Stephen et Czekanski, Aleksander. 2025. « Parameter-based method for predicting strain rate sensitivity in soft materials ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Minaker, Bruce et Ma, Tom Zhe. 2025. « A multibody dynamics approach to the understeer budget ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Mohan, Nirupama et Chaudhari, Gajanan. 2025. « Corrosion performance of boronized martensitic stainless steels ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8. https://doi.org/10.82417/vpe6-7h89 :

Mokué, Pascale Alison Mekazi, Tahan, Antoine et Hof, Lucas. 2025. « A new perspective on measuring manufacturing modularity ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Monk, James, Gordon, William, Tutunea-Fatan, O. Remus et Bordatchev, Evgueni. 2025. « Drag reduction performance of triangular riblets with various included angles immersed in water-glycerol mixture ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Mora, Angel et Czekanski, Aleksander. 2025. « Effect of carbon nanotube agglomeration on the piezoresistive response of polymer nanocomposite architected materials ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Morawo, Isreal et Grecov, Dana. 2025. « Microstructural evolution of chiral nematics: A lid-driven cavity flow study ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Moreno, Jorge Palacios et Mertiny, Pierre. 2025. « Mechanical performance of unidirectional glass fiber-reinforced thermoplastic composites under varying aging conditions ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Mozafary, Seyedeh Mahya, Fung, Alan S., Leong, Wey H. et Kerme, Esa Dube. 2025. « Performance comparison of single and double U-tube borehole heat exchangers in ground source heat pump systems ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Mumtaz, Zarqoon, Farzam, Reza, Guan, Mang, Steiche, Patrick, Kirchen, Patrick et McTaggart-Cowan, Gordon. 2025. « Impact of hydrogen-diesel dual fuel combustion on the performance of aftertreatment system in heavy duty commercial truck ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Nath, Adwaith, Peng, Heather et Qiu, Wei. 2025. « Numerical analysis and validation of turning circle and zig-zag maneuvers of KRISO container ship in calm sea using body force method ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Neid, Alton, Fristot, Pierre et Dumas, Guy. 2025. « A simplified oscillating-foil turbine concept with an elliptical foil in pure heave ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Nemitallah, Medhat et El-Adawy, Mohammed. 2025. « Characteristics of combustion and NOx emissions of ammonia/methane flames in a premixed swirl gas turbine combustor ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Nikkhoo, Amirfarhang, Mousavi, Seyed Pedram, Kolarikola, Hossein Hassanzadeh, Larachi, Faïçal, Pouliot, Roxane, Berthod, François, Rouabhia, Mahmoud, Ohl, Claus-Dieter, Witzel, Bernd et Taghavi, Seyed Mohammad. 2025. « Laser-induced high-speed jets in needle-free injection systems: Mechanisms, applications, and innovations ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Noor, Mashama, Palmer, Patrick R. et Mctaggart-Cowan, Gordon. 2025. « A comparative analysis of PHEV and BEV on fuel economy, greenhouse gas emissions, and annual cost ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Nourbakhsh, Reza, Seo, Jaho, Lee, Hanmin et Choi, Seungjoon. 2025. « Real-time 2D grid map generation for terrain traversability using LiDAR point clouds ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Oishique, Sifat, Gorjibandpy, Tahereh, Ghasemi, Kasra, Sokolowski, Marta, Sotelo, Kiene, Tasnim, Syeda et Mahmud, Shohel. 2025. « Computational fluid dynamics simulation of the indoor microclimate of an enriched-colony cross ventilated commercial layer house in Southern Ontario ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Opoku-Mensah, Dorina, Cyrus, Akili, John, Jerin et Essel, Ebenezer Ekow. 2025. « Spacing ratio effects on the interference of three-dimensional twin synthetic jets ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Opperman, Taylor et Wang, Bingchen. 2025. « Dns study of turbulent flows in a large-amplitude wavy-walled channel ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Peiris, Michael, El-Gindy, Moustafa et Lang, Haoxiang. 2025. « All-wheel steering and driving control of an 8x8 scaled electric combat vehicle ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Pham, Quang Hung et Gagnon, Martin. 2025. « Adaptive filtering techniques for self-detecting outliers in signals: A case study of runner strain measurements ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Quayson-Sackey, Emmanuel, Kankam, Eugene, Nyantekyi-Kwakye, Baafour, Saeedi, Mohammad et Asgari, Ehsan. 2025. « Investigating wake dynamics around airfoils with varying slip lengths using proper orthogonal decomposition ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Radwan, Huda et Pope, Dr. Kevin. 2025. « Techno-economics of interior-point optimization for grid-integrated wind-hydrogen systems ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Ramezani, Sana et Chu, Vincent H.. 2025. « OpenFOAM simulation of the gravity current front in submergence on an incline ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Ramo, Andrea Arroyo, Morency, Clara, Moreau, Stéphane, Bauerheim, Michaël et Sandberg, Richard D.. 2025. « Noise prediction of a controlled diffusion airfoil at high angle-of-attack ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Rand, Charles P., Bernier, Etienne et Bédard, Serge. 2025. « Opportunities of high temperature heat pump integration in various industrial subsectors ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Raphe, Peyman, Ameur, Mohamed et Ross, Douglas. 2025. « A novel CFD-experimental analysis for enhancing air distribution and indoor air quality in existing buildings using high induction diffusers ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Rayhani, Mahsheed et Jian, Cuiying. 2025. « Mechanistic understanding of the effects of graphene oxide on the thermal conductivity of polymer fuel cells ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Rentschler, Tobias, Tismer, Alexander et Riedelbauch, Stefan. 2025. « Frame field prediction for quadrilateral domain partition ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Rezaei, Farshad et Paraschivoiu, Marius. 2025. « Power performance of vertical axis wind turbine in Martian atmosphere using CFD simulation ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Rochefort, Philippe, Précourt, Louis, Winckelmans, Grégoire et Dumas, Guy. 2025. « Characterization of flow curvature effects on a NACA 0015 airfoil attached at the quarter-chord ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Romero, German et Lombana, Mauricio. 2025. « Development of a Python-based BEM software for multi-physical analysis and development of energy ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Ronan, William, Wang, Zhaokai et Wang, Xian. 2025. « Quantifying aleatoric uncertainty for mobile robot object detection ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Roy-Saillant, Alexina, Dumas, Guy et Olivier, Mathieu. 2025. « Importance of gravitational effects on the performances of a fully-passive oscillating-foil turbine deployed horizontally ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Saghafi, Marzia, Mohajernia, Bita et Urbanic, Ruth Jill. 2025. « Design and deposition sequence approaches for enhanced residual stress management in directed energy deposition ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Sanchez, Daniela, Butt, Sajid et Qureshi, Ahmed. 2025. « AI-enabled machine vision model for manual process monitoring and cycle time measurement ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Saram, Muhammad et Yang, Jianming. 2025. « An analytical model of a horizontal axis wind turbine blade with coupled flapwise-edgewise-torsion motions ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Sarvarmaleki, Sorayya Ghaffari, Rancourt, David et Poncet, Sebastien. 2025. « CFD analysis of magnetorheological fluid clutch ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Savsani, Poonam et Savsani, Vimal. 2025. « Multi-objective optimization of a robotic trajectory problem using NS-TLBO ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Sayeed, Tahmid Ibn, Gollamudi, Siddhartha, Fauchoux, Melanie, Payan, Samira et Simonson, Carey. 2025. « Effect of frosting on performance and greenhouse gas emissions of absorption heat pumps in cold climates ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Shamaeian, Neda, Taghavifar, Hamid et Zhang, Youmin. 2025. « Adaptive LMI-based observer for disturbed nonlinear systems with unknown Lipschitz constant ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Shekar, Arjun Chandra, Todescato, Marco, Leclair, Jean-Philippe, Sorgato, Marco, Zitoune, Redouane et Hof, Lucas A. 2025. « Studies on additive manufacturing for polymer repair: Material extrusion and reverse engineering approaches ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Shendy, Mohamed, Maftoon, Nima et Salehian, Armaghan. 2025. « The existence of truncation resonance in TPMS-based periodic acoustic metamaterials ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Sherwood, Adam et Laliberté, Jeremy. 2025. « Preliminary radiator sizing for a polymer electrolyte membrane fuel cell electric aircraft ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Simmons, Scott et Lubitz, William. 2025. « Manufacturing through millenia: A structural investigation of Archimedes screws ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Simmons, Scott, Manor, Matan, Dorier, Alexis, Mendes, Catarina Esposito et Lubitz, William. 2025. « Experimental measurement of gap leakage and the fill height gradient in Archimedes screw pumps ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Sokakini, Soumaya, Tala, Jules Voguelin Simo, Nadau, Lionel, Ilinca, Adrian et Bougeard, Daniel. 2025. « Numerical analysis of partial charging effect in a latent heat thermal energy storage unit ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Sokolowski, Marta, Gorjibandpy, Tahereh, Oishique, Sifat, Tasnim, Syeda et Mahmud, Shohel. 2025. « A review on different approaches for evaluating ventilation rate in laying hen facilities ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Sperling, Ed, Gordon, David et Koch, Bob. 2025. « Low-cost commercial hydrogen sensor for measuring unburned hydrogen in engine exhaust ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Su, Zijie, Ren, Mengke, Liu, Yunpu, Pan, Sheng, Li, Zheng et Shen, Changyu. 2025. « Finite volume neural network (FVNN) with reduced derivative order for incompressible flows ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Tan, Lisha, Nie, Yunbo et Rahnama, Mohammad. 2025. « Evaluating train-induced wind power potential in Vancouver’s SkyTrain system: A case study at Burrard Station ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Tidd, Matthew, Dubay, Rickey et Cao, Hung. 2025. « A fuzzy inference-based architecture for allocating multi-robot tasks ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Tismer, Alexander et Riedelbauch, Stefan. 2025. « Current development status of a design framework for hydraulic machines ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Torabi, Hadis, Zarrin, Hadis et Behzadfar, Ehsan. 2025. « Thermo-rheological analysis of polyhydroxyalkanoates (PHAs): Unravelling thermal degradation mechanism for optimal processing ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Toure, Hamadoun, Ba, Kadiata et Karganroudi, Sasan Sattarpanah. 2025. « Topology optimization of 3D civil structures for buckling resistance: Case of an aluminum footbridge. ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Tran, Mai-Van, Elizalde, Sergio, Champliaud, Henri, Liu, Zhaoheng et Jahazi, Mohammad. 2025. « Wrinkling prediction in metal spinning through numerical simulation: Impact of loading rate and mass scaling ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Tremblay, Simon, Peng, Zitai, Knox, David et Dumond, Patrick. 2025. « Testing a low-cost sensor solution for machine condition monitoring ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Tshibangu, Theophile Mbuyi, Ngoma, Guyh Dituba et Gagnon, Martin. 2025. « Estimating the fatigue reliability of hydraulic turbine runner blades using frailty models and censored maintenance data ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Tusher, Mehide et Ince, Ayhan. 2025. « Very high cycle fatigue behavior of AlSi7Mg alloy: effects of powder condition in laser powder bed fusion ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Vella, Mitchell, Seo, Jaho, Lee, Hanmin et Jang, Ha-Young. 2025. « Development of a dual attention model for soil type semantic segmentation in construction environments ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Vo, Dat, Urbanic, Jill et Altenhof, William. 2025. « Tensile properties of ER70S-6 thin wall geometry built by wire arc additive manufacturing ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Vu, Viet-Hung, Chaudhry, Shubham et Shahzadi, Gullnaz. 2025. « Modeling the process-microstructure-mechanical properties in laser powder bed fusion: Review of data-driven approaches and machine learning strategy for Ti-6Al-4V ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Vu, Viet-Hung, Nguyen, Quoc-Cuong et Nguyen, Viet-Hoang. 2025. « Time series model order estimation in dynamic system and selection of ARMAX optimal model order ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Waseem, Maryum, Tofighian, Hesam et Tarokh, Ali. 2025. « Numerical investigation of particle preferential concentration in homogeneous turbulence using DNS ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Wiens, Travis. 2025. « Generating realistic engine sounds for simulated construction equipment ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Yang, Chengyuan, Gao, Wei, Deng, Zhaoweng et He, Yuping. 2025. « Non singular integral terminal sliding mode drive anti-skid control based on fuzzy road recognition ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Yasami, Amirreza, Tofigh, Mohamadali, Shahbakhti, Mahdi et Koch, Charles Robert. 2025. « Representative driving cycle construction incorporating road grade transitions using a Markov-chain method ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Yu, Jiangtao et He, Yuping. 2025. « Assessing lateral stability of long combination vehicles using stochastic modeling of varying operating conditions and parameter uncertainties ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Yu, Shudong. 2025. « Efficient modelling of high Reynolds number incompressible flows in a Q-subdomain by FEM ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Yuan, Jiajun, Zhou, Qinghui, Xie, Yidong et Wang, Yanxue. 2025. « Obstacle avoidance and trajectory tracking coordinated control of multi-axle all-wheel steering vehicles based on the Ackerman principle ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Zhang, Diyi, Zhou, Qinghui et Xie, Yidong. 2025. « A refined traffic light detection method for challenging low visibility scenarios with CS-YOLOv10 algorithm ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Zhang, Longqian (Derek), Liu, Yuxuan, Chadha, Utkarsh et Behdinan, Kamran. 2025. « Vibrational analysis and optimization of bipolar plates in PEMFCs: A simulation and optimization based study ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Zhu, Enshen et Yang, Sheng. 2025. « Advancing human digital twin: A mini review of human modelling ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Communication

Abadir, Momtaz et Skonieczny, Krzysztof. 2025. « Kinematics modeling and push-pull locomotion control for articulated wheel-legged rover for planetary exploration ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Abida, Rayene, Hof, Lucas et Kenné, Jean-Pierre. 2025. « Automating lockout/tagout data integration in the pulp and paper industry ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Aboussafy, Charles, Brunetière, Noël et Guilbault, Raynald. 2025. « Development of a finite element model for solving 2D Navier-Stokes equations in deep surface textures causing cavitation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Aghdam, Kosar Samadi, Ru, C.q. et Schiavone, Peter. 2025. « Reflection of plane waves from the free surface of a hard sphere-filled elastic metacomposite ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Aghigh, Negar, El Anbri, Ghita, Keivanpour, Samira, Bodkhe, Sampada, Patrick, Jason et Therriault, Daniel. 2025. « Circularity of thermal repair and recycling of 3D-printed thermoplastic composites for aerospace applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Agu, Goodluck, Davis, Matthew, Radpour, Saeidreza et Kumar, Amit. 2025. « Integrated assessment of methane reduction technologies in Canada’s oil and gas sector ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Ahmadi, Hanieh, Vyas, Akash, Li, Haoyang, Hogan, James et Yakout, Mostafa. 2025. « Hydrogen embrittlement of additively manufactured AlCoCrFeMo and as-cast CoCrNi high/medium entropy alloys ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Ahmadihosseini, Adel, Sasmito, Agus, Hassani, Ferri et Amiri, Leyla. 2025. « Effect of temperature and heating rate on rock thermal properties ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Akbari, Soheil et Frigaard, Ian A.. 2025. « Dynamics of a dense viscoplastic fluid placed on top of a Newtonian fluid ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Akbari, Soheil et Frigaard, Ian A.. 2025. « Geothermal energy extraction from depleted oil and gas wells: Assessing British Columbia's potential ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Akberali, Amar Fayyad Kadavilparambil, Kheiri, Mojtaba et Vermeire, Brian. 2025. « Vortex induced vibration of a NACA 0012 airfoil ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Al Shboul, Ahmad et Izquierdo, Ricardo. 2025. « Innovative sensor technologies for monitoring food and healthcare applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Al Shboul, Ahmad, Mechai, Fazia et Izquierdo, Ricardo. 2025. « Impact of pH on room-temperature synthesis of zinc oxide nanoparticles for developing flexible gas sensors ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Al-Absi, Zeyad, Asif, Muhammad et Isa, Mohd Hafizal Mohd. 2025. « Development of lightweight energy storage cladding panels for building applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Alawi, Ali, Saeed, Ahmed, Al Janaideh, Mohammad et Elsharqawy, Mostafa. 2025. « CFD analysis of non-uniform circumferential fin distribution for enhanced battery thermal management ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Alerci, Aldo Leonardo, Paolone, Mario et Vagnoni, Elena. 2025. « Experimental assessment of the impact of ternary units start-up strategies on multistage pump lifetime using a fracture mechanics approach ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Ali, Kashif et Siddiqui, Kamran. 2025. « Impact of infiltration on the energy consumption in high-rise buildings ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Aliahmadi, Seyed Zeinab, Jabbarzadeh, Armin et Hof, Lucas. 2025. « Leveraging Industry 4.0 technologies in Canadian agri-food supply chains ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Alishahi, Marzieh, Rezaei, Yosef et Frigaard, Ian. 2025. « Experimental investigation of the dynamics of displacement flow in vertical wavy annuli across varied flow conditions ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Allard, Benoit, Rice, Ethan et McDonald, James G.. 2025. « Efficient quadrature-based source-term evaluation for the Gaussian moment model applied to multiphase flows ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Alshabab, Somar Shekh, Wu, Zhao et Bamer, Franz. 2025. « Mechanically informed identification of shear instabilities in disordered covalent network glass ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Amar, Luc. 2025. « Robust design of case hardening depth to optimize rolling contact fatigue performance: Numerical methodology and theoretical applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Amirsoleymani, Amirhossein, Huang, Yunqiao, Anyanwu, Ikechukwu, Shahgaldi, Samaneh et Li, Xianguo. 2025. « A comprehensive numerical study of obstacle-integrated flow field header design for proton exchange membrane fuel cells ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Ammar, Syed Muhammad, Duan, Xili et Naterer, Greg F.. 2025. « Experimental investigation of crater dynamics and jet evolution during droplet impact on a liquid pool ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Anwar, Shams, Qamar, Sanaullah, Bashir, Shahzad, Shahgaldi, Samaneh et Li, Xianguo. 2025. « Influence of pH and saline exposure on Zn-Ni coating degradation: Insights from numerical simulations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Anyanwu, Ikechukwu, Amirsoleymani, Amirhossein, Shahgaldi, Samaneh et Li, Xianguo. 2025. « Impact of hybrid flow channels on transport of reactants and water in proton exchange membrane fuel cells ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Ardisson, Aurélien, Beauséjour, Marie-Hélène, Wagnac, Eric et Bulla, Marian. 2025. « Enhanced Hill-type model for muscle contraction simulation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Arefi, S.m.amin et Grecov, Dana. 2025. « Computational study of turbulent gas-powder mixture flow in a novel pneumatic hemostatic delivery system ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Arumughan, Jyothis et Degroot, Christopher T. 2025. « Assessing turbulence models for multiphase mixture model simulations of hydrocyclones using OpenFOAM ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Ashraf, Hasan, Singh, Shalini et Qureshi, Ahmed Jawad. 2025. « Optimizing process parameters for VANCAR-O deposition in wire arc additive manufacturing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Audefroy, Clément, Olivier, Mathieu, Houde, Sébastien et Gosselin, Frédérick. 2025. « Evaluating flow-induced damping by solving a perturbation flutter problem ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Avikpe, Ferdinand, Alibhai, Faisal, Torres, David Romero, Laflamme, Michael et Amon, Cristina. 2025. « A validated in silico model for predicting human pluripotent stem cell proliferation dynamics in a vertical wheel bioreactor ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Ayyagari, Ravi Sastri. 2025. « Orthotropic tetrakaidecahedral foams: A micromechanics-based study ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Azad, Amirreza, Dolatabadi, Ali, Antonini, Carlo et Jadidi, Mehdi. 2025. « Multiscale modeling of bubble evolution on gas-evolving electrodes ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Azad, Ehsan, Sarvestani, Hamidreza Yazdani, Ashrafi, Behnam, Shadmehri, Farjad et Hojjati, Mehdi. 2025. « Mimicking nature: Improving ceramic composite performance with micro-patterned interfaces ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Azarhazin, Soorena, Kozinski, Janusz et Tarokh, Ali. 2025. « Investigation of pipe flattening on internal turbulent heat transfer: A large eddy simulation (LES) study ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Badaloo, Rajiv et Cooper, Thomas. 2025. « A low-cost high-flux solar simulator based on xenon searchlight technology ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bahramitalab, Arash, Afkhami, Sina, Morency, François, Momen, Gelareh et Harvey, Derek. 2025. « Impact of aerodynamic heating on the characteristics of accreted ice on a rotating blade ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bailly, Nicolas et Arnoux, Pierre-Jean. 2025. « From human models to virtual trauma understanding, prevention and management ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bakhtiar, Nazanin Karimi, Proulx, Hélène, Wingert, Loïc et Hallé, Stéphane. 2025. « Spatio-temporal analysis of aerosol transport in a human-scale room: An experimental and computational study ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Banerjee, Gairik et Liu, Kefu. 2025. « Development of a pendulum-based device to harvest energy from large low-frequency oscillations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Banerjee, Utsab, Misra, Sirshendu et Mitra, Sushanta. 2025. « Magnet-assisted control and release of liquid-wrapped magneto-responsive hydrogels ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Barabi, Aidin, Deschênes, Pierre-Antony, Lacasse, Robert, Thibault, Denis et Brochu, Myriam. 2025. « Kinetics of crack propagation in hydraulic turbine runner material exposed to river water ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Barua, Niloy, Pardo, Rubert Martín et Nedi, Jovan. 2025. « Jetting and wave formation in a periodic cylindrical obstacle array under impulsive submersion ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Beaudoin, Étienne J., Zednik, Ricardo J et Demarquette, Nicole R. 2025. « Impact of polydispersity on polymer solutions and electrospun nanofibers ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Behravesh, Amir H., Tariq, Asra et Rizvi, Ghaus. 2025. « Resin properties and part size interrelationships in computed tomography-based volumetric additive manufacturing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bekoute, Luisa Bessom, Brochot, Clothilde, Bahloul, Ali, Halle, Stéphane et Hof, Lucas A.. 2025. « Conception d'un banc de test pour la mesure de l'efficacité d'une visière innovante pour la réduction des aérosols à la source ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Benazzouz, Lydia, Baiteche, Mounir, Ménard, Patrice et Jahazi, Mohammad. 2025. « Modeling the influence of stool volume on flow behavior and defect formation in a 20 MT steel ingot ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bertram, Joshua, Garces, Irina et Jakubinek, Michael. 2025. « Digital sockets: towards manufacturing tailorable prosthetic sockets utilizing voxel-based composites ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bertucceli, Julie, Taillades, Werner, Daoust, Elie et Lerouge, Sophie. 2025. « Rheology as a tool to predict efficacy of liquid embolics for blood vessel occlusion ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bhattarai, Ashish, Jackson, Michael et Luo, Yunhua. 2025. « Characterization of bone nonlinear material properties based on microstructure characterized by micro-CT imaging ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bissainthe-Vandermeer, Sebastian, Hanson, Ronald et O'Brien, Paul G.. 2025. « A parametric study of passive airflow within Trombe wall air channels ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bisulandu, Baby-Jean Robert Mungyeko, Mboko, Marcel Tsimba, Rousse, Daniel et Ilinca, Adrian. 2025. « Thermodynamic performances of an absorption diffusion refrigeration system, equipped with an ejector-compressor, using the thermal energy of the exhaust gases of cement kilns ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bolduc, Marie-Pier et Vermeire, Brian. 2025. « Scale resolving aerodynamics optimization leveraging high order methods ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bose, Akshai, Jitvisuttikul, Jakra, Wang, Zhiyu, Zakani, Behzad et Grecov, Dana. 2025. « Waste cooking oil (WCO) added with cationic cellulose nanocrystals (cCNC) as a green lubricant ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Boucherit, Yacine et Jahazi, Mohammad. 2025. « Evaluation of local mechanical properties and correlation with tensile properties of AA7075-T6 friction stir welds via shear punch testing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Boukor, Maryam, Gosselin, Frederick et Laurendeau, Eric. 2025. « Flow-induced instabilities and wake dynamics of a reconfigured plate ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bourgeois, Janika, Cara, Axelle, Buron, Jean-David et Houde, Sébastien. 2025. « Pressure variability in cavitation bubbles induced by low-voltage discharge ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bouvette, Véronique, Petit, Yvan, Guay, Samuel, De Beaumont, Louis et Wagnac, Eric. 2025. « Investigating time-dependent strain-based cumulative head impact exposure in Canadian varsity football ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Braun, Léo, Lalonde, Sébastien et Guilbault, Raynald. 2025. « Efficient semi-analytical method to assess contact conditions in multi-layered helical strand cables ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Brown, David. 2025. « Conservative and consistent data reconstruction for multi-physics applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bu, Lingyu, Major, Paul et Romanyk, Dan. 2025. « Integrating micro-CT and FEA to explore the effect of gap variability in orthodontic aligner biomechanics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Cai, Jun, Akbarzadeh, Hamid et Mélançon, David. 2025. « Kresling origami-inspired multistable composites for shape reconfiguration ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Cai, Jun, Chen, Yiwen, Seyedkanani, Alireza, Cerruti, Marta et Akbarzadeh, Hamid. 2025. « Multifunctional graphene oxide origamis with morphable reconfiguration ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Cai, Jun, Yan, Lifu, Seyedkanani, Alireza, Orsat, Valérie et Akbarzadeh, Hamid. 2025. « Nano-architected GaN metamaterials with significant piezoelectric effects ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Campion, Donatien, Kreitcberg, Alena et Brailovski, Vladimir. 2025. « Analytical pretraining of artificial neural network models to mitigate limited experiment data availability in the L-PBF melt pool dimensions and densities predictions ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Carrasco-Teja, Mariana, Ndeh-Ngwa, Akumah, Akbari, Soheil, Izadi, Mahdi et Frigaard, Ian. 2025. « Development of advanced predictive software for optimizing oil and gas well cementing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Carretero, Juan Antonio et Lavigne, Troy T.. 2025. « Towards fostering lifelong learning in engineering programs ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Catar, Louis, Rojas, Sebastian Zagal, Wadoux, Pierre, Tabiai, Ilyass et St-Onge, David. 2025. « A mechanical add-on for multi-resin SLA printing: Design, integration, and testing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Chen, Duzhi, Bailly, Nicolas et Evin, Morgane. 2025. « Constitutive model identification and validation for spinal cord finite element analysis under complex loading ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Chen, Haoyu, Shi, Jiahao et Akbarzadeh, Abdolhamid. 2025. « Multifunctional triboelectric mechanical metamaterials with sustainable electric output ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Chen, Shujia, Straney, Don et Pasini, Damiano. 2025. « Rotation-driven multistable material system with reprogrammable logic for sequential-parallel computing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Chiu, Po-Chun, Pirvaram, Atousa, Cooper, Thomas, Leung, Siu Ning et O’Brien, Paul G.. 2025. « Enhancing cooling efficiency using parabolic reflectors in radiative cooling systems ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Choi, Young et Wereley, Norman. 2025. « Suspension stability of a magnetorheological fluid employing high viscosity linear polysiloxane carrier fluids: A two-year study ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Chowdhury, Akash, Misra, Sirshendu et Mitra, Sushanta. 2025. « Interface dynamics during droplet impact on a two-fluid system ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Clarabut, David, Robinson, Brandon, Sandhu, Rimple, Khalil, Mohammad, Pettit, Chris, Poirel, Dominique et Sarkar, Abhijit. 2025. « Parameter estimation and model comparison of nonlinear aerodynamic models for limit cycle oscillations using Bayesian inference ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Cloutier, Jacob, Malek, Sardar et Frigaard, Ian. 2025. « Non-linear finite element model for casing centralization ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Cole, Douglas F., Zednik, Ricardo J. et Hof, Lucas A.. 2025. « Diffusion, viscosity, and cycle times for high aspect ratio glass nanoimprinting ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Constantineau, Cédric, Deschênes, Pierre-Antony, Dubois, René et Brochu, Myriam. 2025. « Predicting the effect of large discontinuities on the fatigue strength of welds in turbine runners ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Cui, Yi. 2025. « From Eshelby’s solution to topological derivatives in general elasticity theory ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Czekanski, Aleksander. 2025. « 4D printing of PNIPAM-based hydrogels: Effects of crosslinking rates and thickness variations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Czekanski, Aleksander. 2025. « Optimizing anisotropy in 3D-printed polymers through topology and print direction strategies ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Dabiran, Nastaran, Robinson, Brandon, Poirel, Dominique et Sarkar, Abhijit. 2025. « Sparse Bayesian physics-informed neural network model for nonlinear aeroelastic prediction ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Daoust, Élie, Ahmadi, Ali, Soulez, Gilles et Lerouge, Sophie. 2025. « Optimisation des propriétés mécaniques des fantômes vasculaires pour des tests in vitro réalistes ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Davla, Shikhar, Tsai, Scott et Ghasemi, Abbas. 2025. « Multi-phase simulations of ultra-low interfacial tension all-aqueous droplets in microfluidics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Defrance, Estelle, Theysgeur, Sandy, Baudouin, Laurie-Anne, Clavijo, Erika, Dimitrov, Krasimir, Phalip, Vincent, Ravallec, Rozenn, Coucheney, Françoise et Choque, Elodie. 2025. « Adding value to the co-products of the Hauts-de-France region (endive) in compostable biosourced packaging formulations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Delbari, Seyed Ali et Hof, Lucas A.. 2025. « The impact of ion-exchange treatment on the degradation behavior of aluminosilicate glass ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Demasi, Joseph, Bailly, Nicolas, Wei, Wei, Thollon, Lionel et Arnoux, Pierre-Jean. 2025. « Improving back protectors evaluation: Towards a more realistic certification approach? ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Desrosiers, Catherine, Brika, Salah Eddine, Masson, Jean-René Poulin, Provencher, Benjamin, Cheriet, Farida, Piché, Nicolas, Brailovski, Vladimir et Guibaut, François. 2025. « Digital twin modeling for defect detection in LPBF parts: A case study ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Dharani, Bharathwaj et Mavriplis, Catherine. 2025. « Numerical investigation of flow dynamics over a multi-element airfoil in ground proximity ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Dickie-Wilsona, Cora, Rosettani, Joshua et Ahmed, Wael. 2025. « Optimizing two-phase flow dynamics in bubble column reactors and airlift pumps: Insights into mixing efficiency and fluid density effects ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Dou, Hongwen et Zhang, Kun. 2025. « An integrated physical and data-driven model for a chiller evaporator ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Douik, Helmi, Chaabane, Amin et Hof, Lucas. 2025. « Development of a method for comparing the similarity of CAO 3D models ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Dubé, William et Houde, Sébastien. 2025. « Numerical simulation study of the blockage effect on the hydrodynamics of a Francis turbine at best efficiency point and partial load ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Dumais, Keanna, Biglarbegian, Mohammad et Garces, Irina. 2025. « Fully 3D printed tactile pressure sensor ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Dumitru, Dorian Stefan, Tabiai, Ilyass et Melancon, David. 2025. « Deployable composite panel for the electromagnetic deorbitation of satellites ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Dumont, Antoine, Gagnon, Jean-Philippe et Klitschke, Silke. 2025. « High-speed thermal infrared analysis of Portevin-Le Chatelier effect in AlMg alloys ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Dupeyroux, Lisa, Wheatley, Sydney, Rodger, Melanie, Lerouge, Sophie, Maurice, Corinne et Ahmadi, Ali. 2025. « Microencapsulation of intestinal bacteria: Impact of RGD on cell activity ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Dussault, Benoit, St-Amant, Yves et Houde, Sébastien. 2025. « Experimental investigation of non-trivial runner-casing interaction in a simplified hydraulic machine ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Ebrahimi-Tirtashi, Ali et Ahmadi, Keivan. 2025. « Bayesian updating of discrete-time domain model of chatter in milling ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

El Adawy, Mohammed, Khedr, Alaa M., Ismael, Mhadi A., Hamdy, Mohamed et Nemitallaha, Medhat A.. 2025. « Numerical simulation of combustion dynamics and NOx emissions in NH3/CH4/Air flames using integrated detailed chemistry and flamelet-generated manifold ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

El-Ghotmi, Osman et McDonald, James. 2025. « A GPU-based high-order discontinuous-Galerkin-Hancock method with adaptive mesh refinement ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Elserfy, Khalid, Elserfy, Zeineldin et Nemitallah, Medhat. 2025. « Performance and emissions characteristics of an intensified membrane reactor for steam methane reforming and H? separation/in-situ combustion for power generation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Elsharqawy, Mostafa. 2025. « CFD investigation of heat recovery ventilation systems with integrated thermal energy storage for energy-efficient homes ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Enama, Laurent Davy Ndzie, Kenne, Jean-Pierre et Gharbi, Ali. 2025. « AI applications in stochastic optimal control for production activity planning in manufacturing systems ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Ermagan, Hamidreza, Hoffmann, Jaap, Sasmito, Agus et Amiri, Leyla. 2025. « Experimental and numerical study on a pilot-scale high-grade rock bed thermal energy storage ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Ermagan, Hamidreza, Ivana, Ivana, Sasmito, Agus et Amiri, Leyla. 2025. « Pore-scale modelling of structured packed bed for application in rock thermal energy storage ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Eskandari, Shahin, Xu, Wanmin, Chen, Slight, Abali, Bilen Emek, Orsat, Valérie et Akbarzadeh, Abdolhamid. 2025. « Elastic wave propagation in chiral metamaterials ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Esmaeilifoomani, Kayvan, Roussinova, Vesselina et Stoilov, Vesselin. 2025. « Achieving super-hydrophobicity through mechanical surface patterning ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Farahani, Mehrad Artkeli et Morency, François. 2025. « Effects of numerical and physical parameters on SPH models using LiDAR-based dam-break flood simulations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Favrel, Arthur et Dollon, Quentin. 2025. « Bayesian approach for real-time parameters inference of unsteady cavitating flows in hydroelectric turbines ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Forget, Zachary, Brochu, Myriam, Deschênes, Pierre-Antony et Paquet, Daniel. 2025. « Influence of variable amplitude loading on crack initiation in 410NiMo filler metal ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Forgues, Francois, Allard, Benoit, McDonald, James G. et Ivan, Lucian. 2025. « A novel polydisperse Gaussian-moment model for the air dispersion of virus-laden aerosols ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Frigaard, Ian. 2025. « Well cementing and reducing leakage ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Frigaard, Ian, Hajieghrary, Omid et Goral, Martyna. 2025. « Bubble migration towards damaged paths in a yield stress fluid ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Fu, Jinbin, Wang, Liangzhu Leon et Laurendeau, Eric. 2025. « Multi-GPU-based CityFFD solver for urban microclimate simulations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Fukushima, Gaku, Grebe, Aurélie, Chartrand, David, Lepage, Jean-Félix et Brouillette, Martin. 2025. « Numerical analysis of carbon capture technology using supersonic flow ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Gabriel, Julie, Wagnac, Éric, Petit, Yvan, Haïat, Guillaume, Rosi, Giuseppe et Flouzat-Lachaniette, Charles-Henri. 2025. « Evaluation of pedicle screw primary stability using an instrumented hammer ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Gaffran, Noah, Liu, Heng, Qi, Gang et Wowk, Diane. 2025. « Low-velocity impact damage characterization of composite facesheet sandwich panels ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Gagnon, Martin, Mai, Vincent, Pham, Quang Hung Pham, Favrel, Arthur et Gauthier, Jean-Philippe. 2025. « In situ turbine startup optimisation using virtual sensors and active learning ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Ganza, Carmel, Sahebari, Seyed Mahmoud Seyedi et Ziki, Jana Abou. 2025. « Investigating the influence of electrolyte composition and voltage signal shape on the surface texture in spark assisted chemical engraving (SACE) ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Garmroodi, Mohammad Reza Daneshvar et Karimfazli, Ida. 2025. « Fluid mechanics of mixing in a two-dimensional stirred: Regimes and mechanisms ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Garmroodi, Mohammad Reza Daneshvar et Karimfazli, Ida. 2025. « Localization mechanisms in mixing of yield-stress fluids ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Garon, Josua, Routier, Anne-Lise, Mélançon, David et Gosselin, Frédérick. 2025. « Wrinkling instability taught by brown algae: Morphogenesis of a kelp blade ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Gauthier, Maxime. 2025. « Comparison of PIV measurements in the vaneless space of the TR-Francis turbine at speed-no-load to CFD simulation results ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Gauthier, Maxime et Rodriguez, Rigel Galvan. 2025. « Impact of RAG-induced concrete deformation on side chamber flow and on dynamic loading of a low head Francis turbine ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Ghandali, Shaghayegh (Sherry). 2025. « Sensor integration to create a digital twin framework of a pre-existing robot ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Gholami, Aysan, Afra, Behrooz et Tarokh, Ali. 2025. « Heat transfer enhancement in heated microchannels: Role of filament characteristics and flapping dynamics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Gonzalez-Lopez, Aldo, Leclair, Jean-Philippe, Villeneuve, Guillaume, Hof, Lucas A. et Escobedo, Carlos. 2025. « In-situ microplastic pre-treatment and sorting using an inertial microfluidic device ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Gonzalez-Lopez, Aldo, Mendez, Federico, Docoslis, Aristides, Vargas, Carlos et Escobedo, Carlos. 2025. « Fractal-geometry microelectrodes improve silver dendritic-based surface enhanced Raman scattering ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Goodarzi, Fahimeh et Di Labbio, Giuseppe. 2025. « Vortex dynamics and trajectories of two pulsed jets: A DNS study ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Gosselin, Louis. 2025. « An engineering researcher’s journey through the Nunavik energy transition ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Gouin, Charles, St-Onge, David et Reeves, Nicolas. 2025. « Ohno: Slow-motion precision engineering for the visualization of Earth’s tectonic drift ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Groth, Clinton et Walia, Rayhan. 2025. « Investigation of observation quality on variational data assimilation methods ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Guemas, Malo, Duc, Kevin Le, Poncet, Sébastien, Samson, Nathalie, Lavallée, Eric, Fortin-Pellerin, Etienne et Micheau, Philippe. 2025. « Regulation of perflubron volume in lung during total liquid ventilation based on the detection of pressure drops ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Guerziz, Arij, Bodkhe, Sampada et Lajili, Chaima. 2025. « 3D printing of smart materials for reconfigurable drones: Design and fabrication ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Guesneau, Marianne, Khazri, Jaber, Cherta, Oscar, Arnoux, Pierre-Jean et Bailly, Nicolas. 2025. « Development and validation of a finite element model for a head protection airbag ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Hadizade, Amin et Degroot, Christopher. 2025. « Exploring the potential of computational fluid dynamics in indoor UV-assisted air treatment ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Hadizade, Amin, Saifi, Reza, Allaf, Malihe Mehdizadeh, Hossain, Mohammad, Jarrahi, Mojtaba, Degroot, Christopher et Peerhossaini, Hassan. 2025. « Particle tracking velocimetry of microalgal response to light ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Hadizadeh, Anita, Zare, Marjan et Frigaard, Ian. 2025. « Yield limit analysis of a single bubble in damaged viscoplastic fluids ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Hafied, Mohamed Islem, Mateur, Wael, Songmene, Victor, Kouam, Jules et Bahloul, Ali. 2025. « Usinage et finition saine des pierres naturelles et des pierres artificielles: Revue des meilleures pratiques ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Halgand, Antoine. 2025. « Optimization of PMMA Reactive Ion Etching in O₂ Plasma for Advanced Microelectronic Applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Hamidi, Mahdi. 2025. « Engineering next-generation materials: from multifunctional nanocomposites to reconfigurable nanoarchitectures ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Hammouti, Abdelkader et Pham Van Bang, Damien. 2025. « Multiscale numerical simulation of flow in porous media using 3D digital twin models from computed tomography ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Hamoud-Michel, Hanna, Wheatley, Sydney, King, Irah, Maurice, Corinne et Ahmadi, Ali. 2025. « Smart capsules for the targeted sampling of microbiota within the gastrointestinal tract ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Haon, Pauline, Brochu, Myriam, Paquet, Daniel et Tôn-Thât, Laurent. 2025. « In situ characterization of microstrain partitioning in the microstructures of hydraulic turbine steels. ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Hashemidehaghi, Hossein, Kheiri, Mojtaba et Hooshiar, Amir. 2025. « Flow-driven soft robots: computational and experimental investigations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Hassani, Fereshteh, Zobeiry, Navid, Javanbakht, Zia et Malek, Sardar. 2025. « Energy absorption of bio-inspired rotating square auxetics: An experimental study ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Hassani, Maryam, Stache, Nelson, Shakibaeinia, Ahmad et Carreau, Julie. 2025. « Machine-learning based resolution enhancement for fluvial hydrodynamics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Hebert, Sean, Corbett, Finley, Jeans, Tiger, Gerber, Andrew et Carretero, Juan Antonio. 2025. « Optimization of leading-edge slat position and orientation for thick airfoils ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Heidari, Parham, Boakye-Yiadom, Solomon et O'Brien, Paul G.. 2025. « Photothermal properties of carbon aerogels ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Helal, Emna et Belgacem, Omayma. 2025. « Enhancing the recyclability and thermal properties of a novel low-carbon engineering polymer, aliphatic polyketone, through graphene and glass fiber incorporation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Henderson, Andrew. 2025. « Sustainability 1.0 in Industry 5.0: Bringing together old thinking and new tools ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Herfray, Benjamin, Higgins, Andrew et Nedi, Jovan. 2025. « Numerical investigation of instability growth and shear stabilization in conducting liquid metal columns ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Hesari, Araz Rezavand, Coulaud, Maxime, Houde, Sébastien et Maciel, Yvan. 2025. « Measured flow at the inlet of a Francis turbine at various no-load and one deep part-load operating conditions ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Hinman, W. Schuyler et Bergen, Wyatt. 2025. « Aerodynamic predictions of a parametric common research model for winged re-entry ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Hocine, Alla Eddine Benchikh Le, Lavimi, Roham et Poncet, Sébastien. 2025. « New adjoint optimization framework applied to a squirrel cage fan using OpenFOAM ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Hou, Hongyu et Cao, Changhong. 2025. « Contact free micro-scale pick and place ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Houde, Sebastien, Gosselin, Frédérick, Maciel, Yvan et St-Amant, Yves. 2025. « Investigations of fluid-structure interactions in Francis turbines during no-load operation and start-ups using innovative model measurements and simulations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Huang, Yu Xuan, Mahmood, Daniyal, Tajeddini, Farshad, Amon, Cristina et Crawford, Sean. 2025. « Sensitivity analysis of intraoperative pressure-derived boundary conditions in acute type B aortic dissection CFD simulations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Hui, Spenser, Deol, Ankush, Moo, Eng Kuan et Garces, Irina. 2025. « Melt electrowriting of shape memory polymers: A novel approach for smart material fabrication ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Ismael, Mhadi A., El-Adawy, Mohammed et Nemitallah, Medhat A. 2025. « Simulation study of mono and hybrid nanofluids for a battery thermal management system with different concentrations under high discharge conditions ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Isukwem, Kindness, Hachem, Elie et Pereira, Anselmo. 2025. « Retraction of levitating drops ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Izadi, Mahdi et Frigaard, Ian. 2025. « A practical framework for modeling flow in uncertain geometries: Application to squeeze cementing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Jafary, Parham, Zareinia, Kourosh et Bougherara, Habiba. 2025. « Growth monitoring, yield estimation, and spatial mapping in vertical farms using computer vision and deep-learning models ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Jalali, Kiarash. 2025. « Fourier triad phase dynamics and singularity evolution in Burgers turbulence ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Jaulin, Tom, Bocher, Philippe, Amar, Luc et Guilbault, Raynald. 2025. « Modeling of steel components hardened by induction and subjected to rolling contact fatigue ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Jelvehgar, Faramarz, Shakibaeinia, Ahmad et Jandaghian, Mojtaba. 2025. « A continuum-based mesh-free model for simulating floating granular materials ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Joney, Md Omar Faruq, He, Yuping et Lang, Haoxiang. 2025. « Design and modelling of autonomous articulated heavy vehicles ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Joney, Md Omar Faruq, He, Yuping et Lang, Haoxiang. 2025. « Dynamic performance analysis of autonomous multi-trailer articulated heavy vehicles with active trailer steering ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Jouini, Nourhen, Bhouri, Maha, Brousseau, Jean, Dassylva-Raymond, Véronique et Deschênes, Jean-Sébastien. 2025. « CFD modeling of an air-argon binary gas mixture for optimizing argon distribution in a semi-closed enclosure under non-vacuum conditions ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Jouneghani, Romina Ardeshiri, Wang, Xu et Schiavone, Peter. 2025. « A compressible liquid inclusion of arbitrary shape in an isotropic elastic matrix ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Kalia, Nikhila, Mcconkey, Ryley, Yee, Eugene et Lien, Fue-Sang. 2025. « Kolmogorov-Arnold networks for turbulence anisotropy mapping ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Kamran, Maham, Li, Chengyu et Khalid, Muhammad Saif Ullah. 2025. « On the role of physiology and kinematics of biological swimmers to spread and suppress their odors in the wake ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Kanali, Mohamed Hosame, Tahan, Souheil-Antoine et Hof, Lucas. 2025. « 3D metrology-assisted assembly and augmented reality ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Kaveh, Kianoosh, Jahazi, Mohammad, Gallego, Paloma Isabel et Moosavi-Khoonsari, Elmira. 2025. « Effect of Cr2O3 in steel refining slag on the corrosion kinetics of MgO-C refractories ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Kazembeigi, Saeideh, Gosselin, Frédérick et Mélançon, David. 2025. « A deployable multi-faceted reflectarray antennas for space applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Kefene, Esayas Berhanu. 2025. « Advancing nanoporous arrays: Hierarchical NiS@Cu-Ni nanoporous arrays for ultra-stable lithium-ion battery anodes ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Kerkouche, Karim, Petit, Yvan, Rey, Clément, Rosi, Giuseppe, Combescure, Christelle et Wagnac, Eric. 2025. « Development of a snow sports helmet integrating a 3D-printed triply periodic minimal surface foam ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Kerriou, Raphael. 2025. « Recycling post-industrial polyester fibers ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Keshmiri, Mohammad, Singh, Shalini et Qureshi, Ahmed. 2025. « Meltpool temperature measurement and monitoring during wire-DED via optical thermal devices ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Khalfaoui, Karim, Moraga, Greco, Fischer, Alexander, Presas, Alexandre et Riedelbauch, Stefan. 2025. « On the application of flow simulation to predict the added damping and mass of vibrating water-submerged disc-like structures ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Khan, Juveiria et Rizvi, Reza. 2025. « Biodegradable and flexible RFID electronics: Carbon-based eco-friendly materials for a circular economy ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Kheirani, Afsaneh, Tabiai, Ilyass et St-Onge, David. 2025. « From strength to leakage: Extensive mechanical testing of a novel ultra-light membrane small indoor airship ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Khennich, Mohammed et Sarrafi, Ahamadreza. 2025. « Exergoeconomic analysis of Tesla turbine integration in CO2 heat pumps: Optimizing sustainability via transiting exergy ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Khorshidi, Siros et Saadatnia, Zia. 2025. « Investigating the static and dynamic behavior of a novel 3D foldable-twistable metastructure: Mathematical, simulation, and experimental analysis ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Kim, Janet, Lee, Taeyoung, Chang, Nathan R.S., Zhao, Jianxiang et Lee, Patrick C.. 2025. « Recyclable polyolefin-based micro-/nano-layered film/foam structures with tunable mechanical and thermal properties ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Kohan, Khashayar F., Limbourg, Raphaël et Nennemann, Bernd. 2025. « Cavitation pitting by inter-blade vortices on a high-head Francis turbine ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Koojehri, Mehdi Nikkhah et Mctaggart-Cowan, Gordon. 2025. « Performance analysis of an onboard floating piston hydrogen compressor for high-pressure direct injection commercial vehicles across driving cycles ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Lachguer, Lamyae, Hof, Lucas A. et Kenné, Jean-Pierre. 2025. « Optimization of lockout/tagout (LOTO) procedures using connected padlocks ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Landry, Christophe et Houde, Sébastien. 2025. « Numerical investigations of the impacts of assembly tolerance on the performance of a multistage centrifugal pump ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Lanteigne, Jacques, Champliaud, Henri, Jahazi, Mohammad, Pham, Xuan-Tan et Nadi, Reza Bab. 2025. « Numerical prediction of fatigue crack propagation in E410NiMo and 13Cr-6Ni using finite element method ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Lanzo, Melina, Shabani, Peyman, Li, Lucy et Laliberte, Jeremy. 2025. « Structural integrity assessment of type IV hydrogen pressure vessels: Drop testing and fatigue damage modelling ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Latulippe, Mathieu, Mayer, Jrr et Khameneifar, Farbod. 2025. « Inspecting damaged turbine blades with data fusion of coordinate measuring machines and 3D scanners ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Le, Andy Vinh, Salame, Maya, Giansily-Blaizot, Muriel, Margeat, Emmanuel, Fenech, Marianne et Abkarian, Manouk. 2025. « Hemorheology using two foci fluorescence correlation spectroscopy ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Leblond, Lugdivine, Wanaverbecq, Nicolas, Ramirez-Franco, Jorge et Evin, Morgane. 2025. « Anatomical analysis of mice spinal cord: Towards numerical modelling ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Leclerc, Etienne, Melancon, David et Vatandoost, Hossein. 2025. « Exploiting the nonlinear deformation of mechanical metamaterials for engineering applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Leclercq, Aurore, Mouret, Thibault et Brailovski, Vladimir. 2025. « Development of refractory metal manufacturing technology by laser powder bed fusion ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Lee, Patrick, Embabi, Mahmoud et Chang, Nathan. 2025. « Rheological characterization of flow-induced crystallization in extensional and shear flows: Implications for polymer foaming ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Leger, Pauline, Marois, Benjamin, Petit, Yvan, Le Naveaux, Franck, Benoit, David et Wagnac, Eric. 2025. « A novel video-based method to estimate helmet pad deformation during impact ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Lemaire, Romain. 2025. « An overview of the soot suppressing ability of oxygenated compounds considered as sustainable alternative transportation fuels ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Lestriez, Remi, Calvo, Daniel, Vallot, Alice et Joussot, Ludovic. 2025. « Modernizing a century-old hydropower plant: Redesign and optimization of a Francis runner ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Lévesque, Olivier, Huang, Jinxing et Dumas, Guy. 2025. « Numerical study and comparison of cavitation effects for an axial and a cross-flow hydrokinetic turbines ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Li, Jin et Zhang, Youmin. 2025. « Security and resilience in cyber-physical systems for smart grids ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Li, Sihan, Timofeev, Evgeny et Oyedele, Oluwakayode. 2025. « Navier-Stokes simulations of shock wave reflection from the axis of symmetry ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Li, Xia. 2025. « Development of safe and high-performance next generation batteries ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Li, Youjian, Sarvestani, Hamidreza Yazdani, Mofatteh, Hossein, Karamzadeh, Vahid, Ashrafi, Behnam, Gholipour, Javad et Akbarzadeh, Abdolhamid. 2025. « Mechanical characterization of porous 3D-printed polymer-derived ceramics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Li, Zhipeng et Zhang, Junfeng. 2025. « A comprehensive computer model for thermal flows of moist air through porous media ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Liaw, Kim Leong, Zolfagharroshan, Mohammad, Tareen, Muhammad S. K. et Sasmito, Agus P.. 2025. « Carbon dioxide two-phase closed thermosyphon for ground freezing applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Liu, Gang et Mayer, J. R. René. 2025. « Identification of machine errors in a small volume by 3D ball probing measurement ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Liu, Weiqiang, Cecere, Renzo et Mongrain, Rosaire. 2025. « Multiscale modeling of drug diffusion in cardiovascular collagen networks using physics-informed neural networks ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Liu, Yunpu, Ren, Mengke, Li, Zheng, Gu, Junfeng, Ruan, Shilun et Shen, Changyu. 2025. « Multiscale simulation of polymer injection molding filling flow with welding line formation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Macrobbie, Connor, Wang, Anqi et Wen, John. 2025. « Combustion and resultant structures of lunar regolith based microthermite powders ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Madhavan, Pramoth Varsan, Shahgaldi, Samaneh et Li, Xianguo. 2025. « Long short-term memory time series modelling of pressure valves for hydrogen-powered vehicles and infrastructure ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Madiega, Blaise et Olivier, Mathieu. 2025. « Incremental time-stepping U-Net LSTM for transient CFD: Forecasting unsteady flow dynamics from limited timesteps ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mahmud, Safayet, Bertuccio, Antonio et Jianu, Ofelia A.. 2025. « Thermal management of batteries using composite PCMs and active refrigerant cooling ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Makris, Christopher, Ghasemi, Abbas et Li, Xianguo. 2025. « Computationally efficient optimization of PEM fuel cell design and operating parameters ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Malekpour, Farshad, Abdali, Marjan, Hojjati, Mehdi et Skonieczny, Krzysztof. 2025. « Additive manufacturing and characterization of PEKK/Martian-regolith composite for lightweight and sustainable space applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Maleksabet, Zahra, Kozinski, Janusz et Tarokh, Ali. 2025. « Investigation of aerodynamic characteristics of iced wind turbine blade ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Manlius, Thais, Delteil, Clémence, Godio-Raboutet, Yves, Simeone, Pierre, Wagnac, Eric, Bailly, Nicolas et Thollon, Lionel. 2025. « Method to reverse-engineer head impact conditions leading to a traumatic brain injury by combining CT and MRI images and a finite element model of the head and brain ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Maroufkhani, Aida et Morency, François. 2025. « Simulation-based evaluation of runway deicing products ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mastroianni, Michael-Anthony, Bodkhe, Sampada et Kadem, Lyes. 2025. « Experimental investigation of the flow generated by a flexible, flapping membrane based on a soft electromagnetic actuator ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mcconkey, Ryley, Balla, Julia, Hofgard, Elyssa, Nigam, Jigyasa et Smidt, Tess. 2025. « The role of local rotational symmetries and equivariance in data-driven fluid mechanics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

McDonald, James G., Ivan, Lucian, Sarr, Joachim et Sommers, Brendan. 2025. « Numerical reconstruction of distributed radioactive sources for decommissioning activities ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

McNally, Liam, Opperman, Taylor et Wang, Bingchen. 2025. « DNS study of turbulent flow through a concentric pipe formed by an outer square duct and an inner circular cylinder ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

McSorley, Grant et MacEwen, Khiym. 2025. « Prototyping and testing of the high-resolution optical payload for the SPUDNIK-1 CubeSat ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mcsorley, Grant, Swaine, Spencer et Osuagwa, Chiagozi David. 2025. « Life cycle analysis and end-of-life strategies for wind turbines in Atlantic Canada ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Meddas, Hamza Sofiane, Zorgani, Muftah, Jahazi, Mohammad, Javidani, Mousa et Levasseur, Tom. 2025. « Impact of orientation and stacking on knife distortion during quenching ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mehranfar, Nariman et Shakibaeinia, Ahmad. 2025. « ML-based solid boundary treatment for meshfree particle methods ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Messikh, Hadil, Jahazi, Mohammad, Baiteche, Mounir et Morin, Jean-Benoit. 2025. « Numerical investigation of water quenching of large forged steel blocks: Effect of bath design on water agitation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Meynard-Duffour, Lola, Aubin, Carl-Éric, Arnoux, Pierre-Jean et Ilharreborde, Brice. 2025. « Value-based optimisation of adolescent scoliosis surgery planning combining predictive analytics and biomechanical modeling: Conceptual framework ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Miah, Irene, Koushanpour, Ashkan, Rackus, Darius et Valente, Virgilio. 2025. « Microfluidic microneedle platform for real-time transdermal muscle injury monitoring ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Milliken, Evan et Altenhof, William. 2025. « Advancement of the clamping mechanism for a novel tensile energy dissipation device exploiting cutting deformation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mirzaei, Sajad, Jahazi, Mohammad et Morin, Jean-Benoit. 2025. « Machine learning-based optimization of tempering parameters in steel manufacturing using industrial electric furnaces ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mirzajanzadeh, Morad et Pasini, Damiano. 2025. « Reprogrammable hybrid curved-straight origami ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Misra, Sirshendu, Banerjee, Utsab et Mitra, Sushanta. 2025. « Liquid-liquid encapsulation: A paradigm towards robust, efficient, multifunctional wrapping ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mitra, Surjyasish, Kim, A-Reum, Zhao, Boxin et Mitra, Sushanta. 2025. « Vertical rolling: how adhesion hysteresis enables spontaneous rolling of a soft sphere on a vertical soft wall ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mobarhan, Niloufar Fadaei, Hakkaki-Fard, Ali et Shahbakhti, Mahdi. 2025. « Optimization and reliability enhancement of solid oxide fuel cells through advanced numerical modeling ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mohaje, Mohammad et Jiang, Liying. 2025. « Rayleigh-Lamb wave propagation in a finitely deformed viscoelastic dielectric elastomer (DE) layer ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mohammadi, Amir, Altenhof, Michael et Jianu, Ofelia. 2025. « Derivative-free optimization of a double-pipe heat exchanger for enhanced copper-chlorine cycle efficiency ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mohammadi, Kyarash, Bhojani, Naeem et Di Labbio, Giuseppe. 2025. « Development of a bladder flow simulator for visualizing ureteral jet dynamics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mohammadi, Mohsen. 2025. « Metal additive manufacturing for the marine industry: Opportunities, challenges, and outlook ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mohammadtaheri, Hossein, Sedaghati, Ramin et Molavi-Zarandi, Marjan. 2025. « A comprehensive analysis of residual stress formation in the selective laser melting process through numerical simulation and experimental validation for Inconel-625 ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Molana, Niki, Rezavand, Araz, Maciel, Yvan et Houde, Sébastien. 2025. « Time-resolved PIV measurement at the exit of a Francis turbine runner during a homologous start-up sequence ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Moncayo, Camilo Mejia, Kenné, Jean-Pierre et Hof, Lucas A.. 2025. « A smart and sustainable closed-loop supply chain scheduling model for remanufacturing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mongrain, Alexandre, Pelletier, Simon, Guilbault, Raynald et Lalonde, Sébastien. 2025. « Finite element modeling of high-voltage cable conductor structures under alternating bending loads ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Montcho, Mario, Bouvette, Véronique, Wagnac, Éric, Petit, Yvan et De Beaumont, Louis. 2025. « Relationship between brain morphology and head dimensions in varsity Canadian football players ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Moosavian, Hashem et Tang, Tian. 2025. « A multi-scale mechanics model for disordered biopolymer gels incorporating intrinsic incompressibility ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Morand, Paul, Amar, Luc et Guilbault, Raynald. 2025. « Contact modeling of conformal surfaces subjected to microslips in spline applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Morin, William, McDonald, James G. et Radulescu, Matei I.. 2025. « Triple-shock reflections using a new reactive 10-moment model ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mortazavinejad, Seyyed Mohsen, Vinches, Ludwig et Hallé, Stéphane. 2025. « Exploring thermal resistance of nonwoven fabric structures in cold-protective clothing using computational fluid dynamics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mtar, Aymen, Tabiai, Ilyass et Boton, Conrad. 2025. « 4D printing of photoreactive shape memory polymer for smart building applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mukherjee, Arnab, Mishra, Sharmistha, Murty, Kumar et Chaudhuri, Swetaprovo. 2025. « Analysing the distribution of SARS-CoV-2 infections in schools and shelters: Integrating model predictions with real-world observations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Naik, Sameeksha, Nagpal, Aaryan et Azhari, Fae. 2025. « A people-first gait analysis device: Bringing sensor-based gait assessment into everyday care ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Najafian, Mohammad R. et Vermeire, Brian C.. 2025. « Strong stability preserving Runge-Kutta projection methods ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Najarzadeh, Zahra, Xu, Yinghao, Heuzey, Marie-Claude et Ajji, Abdellah. 2025. « On some application of rheology: Packaging sealing and swelling in gels ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Namvar, Morteza, Ivan, Lucian et McDonald, James G.. 2025. « Augmented reality-based radiation visualization for nuclear-facility decommissioning ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Narayana, Sidharth Sarojini et Bodkhe, Sampada. 2025. « A numerical simulation approach for continuous wire encapsulation additive manufacturing of polymer and shape memory alloy ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Natale, Giovanniantonio. 2025. « Micromechanical characterization of complex interfaces ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Nazmabadi, Reyhaneh et Hakkaki-Fard, Ali. 2025. « Managing greenhouse humidity with ground air heat exchange systems ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Nejati, Ashkan, Taj, Zia Ud Din, Etemadi, Majed, Balachandar, Ram et Barron, Ronald. 2025. « A numerical analysis of heat transfer and hydrodynamic performance in electric motors using tangential jets ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Newton, Jeremy D., Hossain, Samantha, Song, Yuetong, Pavelick, Jacqueline, Abedi, Kimia, Dos Santos, Claudia, Wong, Amy P. et Young, Edmond W. K.. 2025. « Mechanical modelling of pulmonary hypertension using a protein-based cell stretching platform ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Niasar, Erfan Hamsayeh Abbasi, Li, Haining, Liu, Kefu, Xu, Jason et Li, Leping. 2025. « Effect of shaft penetration factor and interference fit on torsional stiffness of a coupling hub-shaft assembly ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Niasar, Erfan Hamsayeh Abbasi, Seitz, Andreas Martin et Li, Leping. 2025. « Region-dependent material properties of human knee cartilages and menisci determined with indentation maps and machine-learning ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Nicolle, Jonathan, Richard, Pierre-Luc et Dubois, Guillaume. 2025. « Study of hydraulic runner cracks due to side chamber non-uniformity ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Nicolle, Léo, Lalonde, Sébastien et Guilbault, Raynald. 2025. « Design of an adjustable-span test bench for studying fatigue of high-voltage clamp-conductor assemblies ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Nyanyo, Felicia, Hof, Lucas, Zhao, Yaoyao Fiona et Buckenberger, Andy. 2025. « Life cycle assessment of gas turbine package components using sustainable materials and robotic additive manufacturing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Ofstie, Tyson et Nadarajah, Siva. 2025. « Entropy stable Galerkin projection reduced order model for the discontinuous Galerkin method ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Olechowski, Alison. 2025. « Improving hardware design processes with inspiration from software development teams ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Olivier, Mathieu. 2025. « A multigrid solution strategy based on an explicit time-marching method for the solution of incompressible flows ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Oyedele, Oluwakayode, Li, Sihan et Timofeev, Evgeny. 2025. « Numerical simulations of shock wave reflection from the straight wedge with a concave tip ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Pabst-Leonidas, Julia. 2025. « Investigating airflow dynamics in a small CEA plant growth chamber under lunar conditions using computational fluid dynamics (CFD) modeling ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Panchi, Grace Parra, Wu, Xiaoyu et Rangom, Yverick. 2025. « Development of a module-level EV thermal management system through CFD analysis to enhance cold-start performance in 21700 lithium-ion batteries ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Pande, Atharva, Kadem, Lyes et Xu, Hang. 2025. « Bi-stable meta-rod structures with designable shape transformation for medical robots ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Paraschivoiu, Marius, Rabiei, Arezoo et Kheiri, Mojtaba. 2025. « Large eddy simulation of oscillating NACA0012 airfoil ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Parashkooh, Hasan Imani et Jian, Cuiying. 2025. « Data-driven insights into partial molar volumes and water-in-oil droplet coalescence ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Parvizifard, Yasaman et Jianu, Ofelia A.. 2025. « Design of combined heat and power (CHP) cycles compatible with waste heat sources for decarbonization ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Patel, Rudra, Chudasama, Dhruvrajsinh et Satbhai, Ojas. 2025. « Battery thermal management ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Pelletier, Simon, Mongrain, Alexandre et Lalonde, Sébastien. 2025. « Modeling approach for analyzing braided shielding structures in HV cables under bending loads ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Pinto, Gabriel Matheus, Delbari, Seyed-Ali, Dravigné, Julien, Bedwani, Stéphane, Helal, Emna, Demarquette, Nicole et Hof, Lucas. 2025. « Evaluating the rheological behavior of irradiated 3D-printed PLA parts for medical applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Pinto, Gabriel Matheus, Estakhrianhaghighi, Ehsan, Demarquette, Nicole, Hof, Lucas et Akbarzadeh, Abdolhamid. 2025. « Sustainable circular economy approach to utilize biodegradable wood fibers reinforced biocomposites in environmentally-benign architected materials ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Pirabaharan, Navienan et Gkouti, Elli. 2025. « Density-based defect detection in composite materials using magnetic levitation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Polotski, Vladimir et Kenné, Jean-Pierre. 2025. « Production policy optimization in manufacturing systems with long-run average cost based on vanishing discount approach ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Pulatsu, Ezgi et Udenigwe, Chibuike C.. 2025. « Designing edible substrates for four-dimensional (4D) printing applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Qin, Shaoxiang, Zhan, Dongxue, Marey, Ahmed, Potsis, Theodore et Wang, Liangzhu (Leon). 2025. « Generalizable deep learning for rapid urban wind field prediction trained on only 24 CFD simulations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Rahmani, Hossein et Frigaard, Ian. 2025. « New network models for yield stress fluid flows in porous media ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Rahmani, Hossein, Izadi, Mahdi et Frigaard, Ian. 2025. « Squeeze cementing with multiple perforations: Fast computations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Rahmani, Hossein et Taghavi, Seyed Mohammad. 2025. « Viscoplastic flows in superhydrophobic channels: Theoretical modeling and computation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Rahmani, Zahra, Malek, Sardar et Frigaard, Ian. 2025. « Prediction of stress distributions in eccentric wellbores: Analytical and numerical modeling ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Ramezani, Mohammadmehdi et Karimpour, Shooka. 2025. « Comparative evaluation of incompressible and density-varied approaches for turbulence analysis in hydraulic jumps ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Rezaei, Farshad, Kheirir, Mojtaba et Paraschivoiu, Marius. 2025. « LES analysis over the edge of a building roof-top for wind turbine placement ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Rezaei, Hanie, Ebrahimiazar, Maryam, Zargartalebi, Mohammad et Sinton, David. 2025. « Accelerated fluid discovery for data center immersion cooling ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Rezaei, Mohammadhossein, Helal, Emna et Demarquette, Nicole R.. 2025. « Optimizing nozzle geometry for extrusion-based additive manufacturing to accommodate various grades of polyethylene ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Rezaei, Yosef, Alishahi, Marzieh, Akbari, Soheil et Frigaard, Ian. 2025. « Yield stress fluid displacement by Newtonian fluid in a wavy annular geometry: Experimental observations and insights ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Rinaldi, Joseph-Raffael et Vermeire, Brian. 2025. « High-order direct numerical simulation of finite span wings ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Robaczewski, Tomek, Johansson, Emile et Bodkhe, Sampada. 2025. « 3D printing of encapsulated continuous metal wires ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Robinson, Brandon, Sandhu, Rimple, Khalil, Mohammad, Poirel, Dominique, Pettit, Chris et Sarkar, Abhijit. 2025. « Bayesian sparse learning of the Leishman-Beddoes model of aerodynamic stall using data from aeroelastic wind tunnel experiments ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Rodger, Melanie, Lerouge, Sophie et Ahmadi, Ali. 2025. « Optimizing pectin-stabilized albumin-based foams for enhanced support bath stability in in-foam embedded bioprinting ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Rodgers, Marianne. 2025. « Maintenance issues and research opportunities in the operation of a 12-year-old 10 MW wind R&D park ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Romann, Kay, Nedi, Jovan et Higgins, Andrew. 2025. « Cavitation threshold sensitivity to nuclei in accelerated liquids ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Roy, Dominic et Nadarajah, Siva. 2025. « Nonlinearly stable flux reconstruction for implicit large eddy simulation of wall-bounded flows ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Rughani, Rohan, Naidu, Jyoti Prakash et Garces, Irina. 2025. « Additive manufacturing of dentures using polyether ether ketone ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Sababha, Hussam et Daqaq, Mohammed. 2025. « Transforming incompressible computational fluid dynamics into a convex optimization framework ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Saboor, Abdul, Naveed, Muhammad Taha, Kandage, Thasanka et Manzoor, Muhammad Taha. 2025. « Techno-economic analysis for the deployment of electric thermal energy storage systems using binary chloride salts in Edmonton, Alberta ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Sadr, Motahareh et Vétel, Jérôme. 2025. « Investigating Lagrangian detachment versus Eulerian separation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Safarbati, Rafik, Jahazi, Mohammad et Dourandish, Simin. 2025. « Full field modeling of austenite grain growth using the level set method ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Safdar, Mutahar, Wood, Gentry, Zimmermann, Max, Hannesen, Florian, Paul, Padma, Lamouche, Guy, Wanjara, Priti et Zhao, Yaoyao Fiona. 2025. « Applying artificial intelligence in directed energy deposition additive manufacturing of metal matrix composites: Lessons and experiences for industrial implementation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Sahamifar, Soheil, Naylor, David et Friedman, Jacob. 2025. « Addressing inconsistencies in interferometric nanofluid heat transfer studies ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Sahebari, Seyed Mahmoud Seyedi, Ganza, Carmel, Barari, Ahmad et Ziki, Jana Abou. 2025. « ML-driven real-time monitoring of glass microchannel fabrication with spark-assisted chemical engraving (SACE) technology ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Salimi, Ali et Ince, Ayhan. 2025. « Graph convolutional networks for modeling elastic-plastic stress and strain fields near cracks ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Samii, Dara Rahmat et Tembely, Moussa. 2025. « Numerical simulation and prediction of particle distribution based on aeroacoustics signals emitted by the HVAF process ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Sarailoo, Hassan, Belamri, Thabet, Campbell, Lesley et Bougherara, Habiba. 2025. « Enhancing sustainable agriculture through heat recovery from light fixtures in indoor vertical farming systems ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Sarmah, Sidharth, Das, Tuhin, Brahimi, Salim, Yue, Stephen et Song, Jun. 2025. « A new modeling approach to predict hydrogen embrittlement induced ductile-to-brittle transition in high strength steels ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Savsani, Jiya et Savsani, Vimal. 2025. « Feasibility of highway wind and solar energy harvesting using VAWT in Canada ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Schwarz, Udo. 2025. « Mechanisms of nanoscale deformation in bulk metallic glasses investigated using pillar compression ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Seyedkanani, Alireza, Cai, Jun et Akbarzadeh, Abdolhamid. 2025. « A multistable origami-inspired magneto-active metamaterial ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Shabeer, Yasmin, Madani, Seyed Saeed, Panchal, Satyam, Mousavi, Mahboubeh et Fowler, Michael. 2025. « Different metal-air batteries as range extenders for the electric vehicle 2 market: A comparative study ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Shahid, Muhammad Zubair, Farooqi, Ahmad Salam, Hossain, Mohammad Mozahar et Nemitallah, Medhat Ahmed. 2025. « Hydrogen production with CO2 capture: A thermodynamic analysis of sorption enhanced WGS reaction using Li4SiO4/MgO sorbent ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Shahryari, Benyamin, Mofatteh, Hossein, Sargazi, Arian, Mirabolghasemi, Armin, Meger, David, Kalamkarov, Alex et Akbarzadeh, Abdolhamid. 2025. « Harnessing multimodal multistability for next-generation soft robotic arms ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Shakeri, Amin, Ghazal, Abdallah et Karimfazli, Ida. 2025. « From experiments to theory: 3D modeling of yield-stress fluid injection in confined pipes ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Shakeri, Amin, Ghazal, Abdallah et Karimfazli, Ida. 2025. « Impact of three-dimensional effects on yield-stress fluid injection in eccentric pipes ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Sharpe, Peter et Lubitz, William. 2025. « Measurements and simulation of internal fan-driven airflow in a commercial greenhouse ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Sherman, Steve, Mao, Min, Choi, Young et Wereley, Norman. 2025. « Experimental validation of a magnetorheological fluid activation flow CFD analysis ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Shi, Jiahao, Ju, Kang, Chen, Haoyu, Orsat, Valerie, Sasmito, Agus, Ahmadi, Ali et Akbarzadeh, Hamid. 2025. « Ultrahigh piezoelectricity in ferroelectric ceramic truss-based metamaterial ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Shirazi, Peimaneh et Rosen, Marc A.. 2025. « Solar-assisted foundation-based geothermal energy system performance assessment ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Shokraneh, Saman et Floryan, Jerzy Maciej. 2025. « Flow control using surface vibrations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Shokrollahi, Maryam, Vassal, Orlane, Dubé, Martine et Tabiai, Ilyass. 2025. « Impact of nozzle length and extrusion speed on tensile properties of FFF-printed filaments ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Smart, Emma, Roussel, Olivia et Jenkyn, Thomas. 2025. « Abnormal frontal and transverse plane moments of the hindfoot in pes cavus and pes planus foot pathologies measured with a multi-segment kinetic foot model ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Soares, Matheus, Campion, Donatien, Brailovski, Vladimir et Kreitcberg, Alena. 2025. « In-situ monitoring of LPBF metal process using a dual-wavelength thermal camera compared to numerical simulations and experimental measurements ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Sobral, Taj, Nedi, Jovan et Higgins, Andrew J.. 2025. « Instabilities in a conducting liquid metal column ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Sotelo, Silvia Castillo, Ouellet-Plamondon, Claudiane, Hof, Lucas et Etxeberria, Miren. 2025. « Design of eco-efficient printable mortar mixes incorporating eggshell residues ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Souza, Ziani Santana Bandeira De, Fechine, Guilhermino José Macêdo, Sobrinho, Maurício Alves Da Motta, David, Éric et Demarquette, Nicole Raymonde. 2025. « Impact of preparation methods on dielectric and mechanical properties of graphene-epoxy nanocomposites ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

St-Onge, David. 2025. « Beyond the stars, onto the stage: Robotics in art and space ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Strugova, Daria, David, Eric et Demarquette, Nicole R.. 2025. « Extensional rheology of PP/PS/MWCNT electrically conductive polymer composites: Impact on electrical properties ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Sun, Mengqian et Wowk, Diane. 2025. « Shell-based adhesive-core equivalent modelling for aluminum honeycomb sandwich panels under compression-after-impact loading ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Sun, Qiao. 2025. « Across the modeling spectrum: Analytical and hybrid approaches to vibrations in mechanical drivetrains ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Suwal, Rajan, Weck, Arnaud et Chen, Kuiying. 2025. « Failure analysis of environmental barrier coatings under adverse operational environment: Multi-physics modeling ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Sweidy, Dorian, Teimouri, Kowsar, Maraouch, Ghassan, Saleh, Wael, Evin, Morgane et Kadem, Lyes. 2025. « Experimental investigation of the flow dynamics in a left ventricle during a blunt chest trauma ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Sweidy, Dorian, Wei, Wei, El-Louali, Fedoua, Kadem, Lyes et Evin, Morgane. 2025. « A finite element model of a post-traumatic ventricular septal defect in asymptomatic and symptomatic hearts ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Therriault, Daniel. 2025. « Additive manufacturing of multifunctional composites for aerospace applications: Large-scale, non-planar and multi-process ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Tolouei, Ehsan, Saadati, Mohammad, Morin, Jean-Benoit, Garcia-Mateo, Carlos et Jahazi, Mohammad. 2025. « Influence of isothermal bainitic phase transformation temperature on the microstructure and hardness evolution of medium-carbon high strength steel ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Turcitu, Tatiana, Champagne, Kyle, Le, Andy V. et Fenech, Marianne. 2025. « The role of diamide and glutaraldehyde in modulating red blood cell viscosity and deformability ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Uwineza, Laetitia et Wu, Xiao Yu. 2025. « Probabilistic carbon abatement costs of green hydrogen for heavy-duty trucks ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Vagnoni, Elena. 2025. « Fluid-structure interaction in hydraulic machines: Optimizing start-up for longevity ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Vaillant, Mikael, Ferreira, Victor Oliveira, Mainville, Wiebke, Raymond, Vincent, Lamarre, Jean-Michel, Chioua, Moncef et Blais, Bruno. 2025. « Development of a heat transfer surrogate model to predict convective heat transfer coefficient from CFD simulation in a multi-input, multi-output cooling system ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Van Herpt, David et Poirel, Dominique. 2025. « Experimental study and analysis of a free pitching flexible cantilever NACA0012 wing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Vanackere, Symon, Le Duc, Kevin, Guémas, Malo, Lavallée, Eric, Richard, Gabriel, Samson, Nathalie, Poncet, Sébastien, Fortin-Pellerin, Etienne et Micheau, Philippe. 2025. « Dynamic imaging method of trachea's oscillations in total liquid ventilation: Preliminary findings ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Vella, Emma, Gojon, Romain, Jardin, Thierry et Moreau, Stéphane. 2025. « Rotor-beam interaction noise of small-size drones ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Vermeire, Brian et Saghir, Muhammad. 2025. « Leveraging consumer-grade GPUs for efficient high-order computational fluid dynamics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Viggiano, Bianca. 2025. « Predicting particle paths: Lagrangian dynamics in turbulent flows ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Villeneuve, Guillaume, Leclair, Jean-Philippe, Wuthrich, Rolf et Hof, Lucas A.. 2025. « Precision machining of glass in the submillimeter scale using thermochemically-assisted grinding ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Wang, Anqi, Liu, Jingtian et Wen, John. 2025. « Propagation of combustion and thermal characteristics of magnetic Al@Fe3O4 metal-stable intermetallic composite ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Wang, Dongming et Brinkerhoff, Joshua. 2025. « A parameter optimization of the y-SST transition model for moderate Reynolds number flows over airfoils ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Weck, Arnaud. 2025. « Ultrafast laser processing: Developments in texturing and micromachining ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Woulaché, Rosalie Laure et Mayer, J. R. René. 2025. « Measurement of intra-axis errors of the rotary C-axis of a machine tool considering the effect of the ball erroneous positioning ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Xia, Yanran et Dumas, Guy. 2025. « Modelling of hydrokinetic turbine farms using simplified numerical approaches ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Xie, Siwen, Clancy, Kaitlyn et Onaizah, Onaizah. 2025. « High-resolution automated fabrication of 3D magnetic soft microrobots ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Xing, Harvey et Liu, Yuqing. 2025. « Highly elastic and underwater superoleophobic polypyrrole-coated starch cryogels for water purification ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Xu, Chaochen, Ye, Zhijiang et Egberts, Philip. 2025. « Tuning hysteretic friction behavior of supported atomically thin nanofilm via substrate roughness ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Xu, Hang et Soltanmohammadi, Kianoosh. 2025. « Multi-stable mechanical metamaterials for soft robots with contour recognition ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Xu, Kaige et Liu, Yanzihang. 2025. « Developing wearable biosensors from raw egg white ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Yang, Zhen, Cai, Jun et Mélançon, David. 2025. « Leaking inflatables: From defects to functionalities ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Yeganeh, Arsalan, Mandegarian, Sepanta, Hojjati, Mehdi et Moghaddar, Hassan. 2025. « Experimental study on pull-out strength of sandwich composite panels with recycled PET foam core ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Yousefi, Afrouz, Sadrzadeh, Mohtada et El-Din, Mohamed Gamal. 2025. « Removal of perfluoroalkyl and polyfluoroalkyl substances (PFAS) from water using a hybrid process of membrane separation and anodic oxidation process ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Yuan, Junlin. 2025. « Simulation and modeling of non-canonical wall-bounded turbulent flows ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Zacherl, Lorenz. 2025. « Modeling of process-induced deformations in in-situ AFP manufacturing of thermoplastic composites ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Zaessinger, Judith, Strugova, Daria, Demarquette, Nicole et Bellehumeur, Celine. 2025. « Rheological investigation of the miscibility of LLDPE-LDPE: Influence of molecular weight, comonomer content and chain branching ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Zaidi, Syed Adeel Haneef, Chaabane, Amin et Khan, Sharfuddin. 2025. « Core technologies for digital twins ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Zanjani, Masoumeh Kazemi. 2025. « Data-driven supply chain and operations management in smart production systems ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Zein, Mohammad, Kelouwani, Sousso et Hébert, Marie. 2025. « Designing an innovative pressure actuator with an integrated source to customize a portable pump for microfluidic systems ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Zhang, Gaixia. 2025. « Battery energy device development and system integration ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Zhang, Joseph, Huang, Rui et Suo, Zhigang. 2025. « Inflation of balloons: Entropic elasticity and bifurcation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Zhang, Junfeng. 2025. « Computer modelling and numerical studies of capsule dynamics in fluid flows: The membrane viscosity effects ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Zhang, Xiaoyang, Yuan, Weixing et Poirel, Dominique. 2025. « Numerical investigation on transverse-gust-induced dynamic stall ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Zhang, Zi Xin et Cao, Changhong. 2025. « Freeform DIW 3D printing of mechanically tunable 2D material-based nanocomposites ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Zhu, Xiaochen et Timofeev, Evgeny. 2025. « Numerical modelling of diaphragm-rupture-assisted starting of Prandtl-Meyer supersonic air intakes ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Zimmermann, Camila Aparecida et Ung, Bora. 2025. « PDMS optical waveguides for pressure sensing: A design of experiments approach ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Zueter, Ahmad, Dalaq, Ahmad et Daqaq, Mohammed. 2025. « Passive ventilation via origami-driven stack effect in cold regions ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).