L'affiliation est "Génie aérospatial"

Afkhami, Sina, Maroufkhani, Aida, Morency, François, Momen, Gelareh et Harvey, Derek. 2025. « Numerical investigation of aerodynamic heating influence on ice accretion process of rotating blades ». In AIAA Aviation Forum and ASCEND (Las Vegas, NV, USA, July 21-25, 2025) Coll. « AIAA Paper », vol. AIAA 2025-3235. American Institute of Aeronautics and Astronautics Inc, AIAA.

Annunziata, Rémy, Bonne, Nicolas et Garnier, François. 2025. « Numerical investigation of engine position effects on contrail formation and evolution in the near-field of a realistic aircraft configuration ». Aerospace Science and Technology, vol. 167.

Bahramitalab, Arash, Afkhami, Sina, Morency, François, Momen, Gelareh et Harvey, Derek. 2025. « Impact of aerodynamic heating on the characteristics of accreted ice on a rotating blade ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bakhtiari, Mohammad, Momen, Gelareh et Jafari, Reza. 2025. « Photothermal polyurethane coatings with functionalized nanoparticles and quasi-liquid layer for enhanced anti-icing and solar-assisted de-icing ». Solar Energy, vol. 300.

Farahani, Mehrad Artkeli et Morency, François. 2025. « Effects of numerical and physical parameters on SPH models using LiDAR-based dam-break flood simulations ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Gimenez, Jessica C. Ferreira, Paiva, Robert, Bonatti, Sophia H. F., Staffa, Lucas H., Pereira, Edenir Rodrigues, Helal, Emna, Demarquette, Nicole R., Homem, Manoel G. P. et Cruz, Sandra A.. 2025. « Mitigating UV-C degradation in polypropylene using hybrid TiO2/few-layer graphene/photostabilizer systems ». ACS Omega, vol. 10, nº 44. pp. 53467-53478.

Gimenez, Jessica Caroline Ferreira, Bonatti, Sophia Helena Felisbino, Basaglia, Marcos Vinicius, Garcia, Rodrigue Henrique dos Santos, dos Santos, Alef, Staffa, Lucas Henrique, Samara, Mazen, Bettini, Silvia Helena Prado, de Azevedo, Eduardo Ribeiro, Helal, Emna, Demarquette, Nicole Raymonde, Homem, Manoel Gustavo Petrucelli et Cruz, Sandra Andrea. 2025. « 1H time domain nuclear magnetic resonance and oscillatory rheology as a tool for uncovering the impact of UV-C radiation on polypropylene ». Polymers, vol. 17, nº 20.

Helal, Emna et Belgacem, Omayma. 2025. « Enhancing the recyclability and thermal properties of a novel low-carbon engineering polymer, aliphatic polyketone, through graphene and glass fiber incorporation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Hiol, Ralph Kinte Pouhe et Sanjose, Marlène. 2025. « Aeroacoustic analysis in a tail rotor configuration using large eddy simulations and Ffowcs Williams and Hawkings’ analogy ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Karimi, Samira, Helal, Emna, Pinto, Gabriel Matheus, Gutierrez, Giovanna, Moghimian, Nima, Vello, Tatiana Parra, Fechine, Guilhermino José Macêdo, David, Eric et Demarquette, Nicole. 2025. « Effect of few-layer graphene (FLG) and relative photodegradation depth on the ductile to fragile transition of high-density polyethylene ». Journal of Applied Polymer Science.
(Sous presse)

Maroufkhani, Aida et Morency, François. 2025. « Simulation-based evaluation of runway deicing products ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Niknejad, Ehsan, Jafari, Reza et Momen, Gelareh. 2025. « Electrospun poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/poly(vinyl alcohol) nanofibers prepared via a DMSO–water co-solvent and freeze–thaw crosslinking ». Journal of Materials Science, vol. 60, nº 48. pp. 25779-25796.

Pinto, Gabriel Matheus, Delbari, Seyed-Ali, Dravigné, Julien, Bedwani, Stéphane, Helal, Emna, Demarquette, Nicole et Hof, Lucas. 2025. « Evaluating the rheological behavior of irradiated 3D-printed PLA parts for medical applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Rezaei, Mohammadhossein, Helal, Emna et Demarquette, Nicole R.. 2025. « Optimizing nozzle geometry for extrusion-based additive manufacturing to accommodate various grades of polyethylene ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Rojas-Hernandez, Juan Jos., Solis-Quesada, Alexander et Gonzalez-Llorente, Jesus D.. 2025. « Development of an integrated system for screening and testing of electrochemical cells for cubesats ». In IEEE 12th International Workshop on Metrology for AeroSpace (MetroAeroSpace) (Naples, Italy, June 18-20, 2025) pp. 12-17. Institute of Electrical and Electronics Engineers Inc..

Roshan, Shamim, Momen, Gelareh, Jafari, Reza, Fofana, Issouf et Brettschneider, Stephan. 2025. « Advanced dual-responsive silicone-based nanocomposites: Enhancing the de-icing efficacy of power transmission lines by harnessing magnetic and solar energy ». Materials Today Communications, vol. 49.
Compte des citations dans Scopus : 1.