ENGLISH
La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS
RECHERCHER

L'affiliation est "Génie mécanique"

Exporter en format [Atom feed] Atom [RSS feed] RSS 1.0 [RSS2 feed] RSS 2.0
Groupement par Professeur | Année | Type de document | Sans groupement
Nombre de documents archivés : 33.

Article publié dans une revue, révisé par les pairs

Beauchamp, Yves, Thomas, Marc, Youssef, Youssef A. et Masounave, Jacques. 1996. « Investigation of cutting parameter effects on surface roughness in lathe boring operation by use of a full factorial design ». Computers & Industrial Engineering, vol. 31, nº 3-4. pp. 645-651.
Compte des citations dans Scopus : 38.

Draganoiu, G., Lamarche, L. et McComber, P.. 1996. « A computer model of glaze accretion on wires ». Journal of Offshore Mechanics and Arctic Engineering, vol. 118, nº 2. pp. 148-157.
Compte des citations dans Scopus : 4.

Etemad, S. G., Mujumdar, A. S. et Nassef, Roger. 1996. « Simultaneously developing flow and heat transfer of non-Newtonian fluids in equilateral triangular duct ». Applied Mathematical Modelling, vol. 20, nº 12. pp. 898-908.
Compte des citations dans Scopus : 17.

Fenkam, S. et Masounave, Jacques. 1996. « Usinage orthogonal en phase quasi-pâteuse des métaux et des composites à matrice métallique: influence de la fraction volumique de grosses particules; Matériaux et Techniques ». Matériaux et Techniques, nº 9-10.

Harmsen, Marjorie, Laufer, Emanuel et Masounave, Jacques. 1996. « Si-modified ZA alloy for journal bearing applications ». Wear, vol. 192, nº 1-2. pp. 128-133.
Compte des citations dans Scopus : 19.

Kajl, Stanislaw, Lavelle, D., Poulin, R. et Roberge, M-A.. 1996. « Étude sur l'application d'une pompe à chaleur géothermique ». La Maîtrise de l'Énergie. pp. 9-11.

Sassi, Sadok, Thomas, Marc et Laville, Frédéric. 1996. « Dynamic response obtained by direct numerical integration for pre-deformed rectangular plates subjected to in-plane loading ». Journal of Sound and Vibration, vol. 197, nº 1. pp. 67-83.
Compte des citations dans Scopus : 4.

Thomas, Marc, Beauchamp, Yves, Youssef, Youssef A. et Masounave, Jacques. 1996. « Effect of tool vibrations on surface roughness during lathe dry turning process ». [Article de conférence]. Computers & Industrial Engineering, vol. 31, nº 3-4. pp. 637-644.
Compte des citations dans Scopus : 90.

Villar, Nathalie et Masounave, Jacques. 1996. « Élaboration des composites à particules ». Technique de l'Ingénieur. pp. 1-22.

Compte rendu de conférence

Beauchamp, Yves, Arteau, J. et Brosseau, M.. 1996. « Evaluation of a Lineman's belt equipped with a retractable Lanyard fall arresting system ». In Advances in Applied Ergonomics: proceedings of the 1st International Conference on Applied Ergonomics (ICAE '96), Istanbul, Turkey, May 21-24, 1996 (Istambul, Turkey, May 21-24, 1996) pp. 88-92. USA Pub..

Beauchamp, Yves, Thomas, Marc et Arteau, Jean. 1996. « Psychophysical measurements as an effective way of evaluating climbability of wood treated utility poles ». In Proceedings of the International Conference on Computers & Industrial Engineering (Kyongju, Korea, Oct. 6-9, 1996) pp. 925-928. Computers and Industrial Engineering.

Carrière, Jean-Bernard, Beauchamp, Yves, Dionne-Proulx, Jacqueline et Ngô, Anh Dung. 1996. « Strategic impact of new technology on the prevention of industrial accidents ». In Manufacturing agility and hybrid automation - I: proceedings of the 5th International Conference on Human Aspects of Advanced Manufacturing: Agility and Hybrid Automation, Maui, Hawaii, USA, August 1996. (Maui, HI, USA, Aug., 1996) pp. 512-516.

Dao, Thien-My et Galopin, Michel. 1996. « Human factors in the successful implementation of cellular manufacturing systems ». In Manufacturing agility and hybrid automation - I: proceedings of the 5th International Conference on Human Aspects of Advanced Manufacturing: Agility and Hybrid Automation, Maui, Hawaii, USA, August 1996. (Maui, HI, USA, Aug., 1996) pp. 431-434. Louisville, KY, USA : IEA Press.

Doré, S. et Youssef, Y. A.. 1996. « Student club competitions - real world experience for undergraduate students ». In Proceedings of the 10th Canadian Conference on Engineering Education (Kingston, ON, Canada, June 16-18, 1997) pp. 383-390.

Druez, J., McComber, P. et Laflamme, J.. 1996. « An analysis of selected atmosferic icing events on test cables ». In OMAE 1996: proceedings of the 15th International Conference on Offshore Mechanics and Arctic Engineering: presented at the 15th International Conference on Offshore Mechanics and Arctic Engineering, Florence, Italy, June 16-20, 1996 (Florence, Italy, June 16-20, 1996) pp. 1-9. New York, NY, USA : American Society of Mechanical Engineers.

Haldar, A., C., Pon, McComber, P., Marshall, M. A., Ishac, M., Goel, A. et Kastelein, M.. 1996. « Validation of ice accretion models for freezing precipitation using field data ». In 7th International Workshop on Atmospheric Icing of Structures (IWAIS'96) (Chicoutimi, QC, Canada, June 3-6, 1996) pp. 189-194.

Kajl, S., Poulin, R., Malinowski, P. et Roberge, M. -A.. 1996. « Fuzzy assistant for evaluation of building energy consumption ». In Proceedings of the 4th IFSICC-International Fuzzy Systems and Intelligent Control Conference, Maui, Hawaii, USA (Maui, HI, USA, Apr. 8-11, 1996) pp. 67-74.

Lamarche, Louis, Galopin, Michel, Simoneau, R. et Lassoeur, P.. 1996. « Optimization of robotic welding procedures for maintenance repair of hydraulic turbines ». In 4th International Conference on Trends in Welding Research (Gatlinburg, TN, USA, June 5-8, 1995) pp. 809-814. Materials Park, OH, USA : ASM.

Marchand, F. et Rivière, A.. 1996. « Un modèle d'information intégré pour les gammes d'usinage ». In Integrated design and manufacturing in mechanical engineering: proceedings of the 1st IDMME Conference held in Nantes, France, 15-17 April 1996 (Nantes, France, April 15–17, 1996) pp. 857-866. Boston, MA, USA : Kluwer Academic Publishers.

McComber, P., Latour, A., Druez, J. et Laflamme, J.. 1996. « The icing rate meter as a forecasting instrument for transmission line icing ». In 7th International Workshop on Atmospheric Icing of Structures (IWAIS'96) (Chicoutimi, QC, Canada, June 3-6, 1996)

Ngô, Ahn Dung, Hoa, Suong Van et Martin, Lue. 1996. « Mode III interlaminar fracture toughness of unidirectional graphite/epoxy composite ». In Design and manufacturing of composites: proceedings of the Joint Canada-Japan Workshop on Composites, Kyoto, Japan, August 1996 (Kyoto, Japan, Aug. 21-23, 1996) pp. 91-94. Lancaster, PA, USA : Technomic Publishing Co..

Ngô, Anh Dung, Malinowski, P., Kajl, S. et Balazinski, M.. 1996. « Fuzzy logic approach to manual material handling tasks ». In Manufacturing agility and hybrid automation - I: proceedings of the 5th International Conference on Human Aspects of Advanced Manufacturing: Agility and Hybrid Automation, Maui, Hawaii, USA, August 1996 (Maui, Hawaii, USA,, Aug., 1996) pp. 588-590. Louisville, KY, USA : IEA Press.

Scheed, L., Néron, D. et Masounave, J.. 1996. « Perçage en phase pâteuse induite des métaux et composites métalliques ». In Engineering applications of mechanics: manufacturing science and engineering : CSME forum SCGM 1996, Hamilton, Ontario, Canada, May 7 - 9, 1996 ; proceedings/comptes rendus (Hamilton, ON, Canada, 7-9 mai 1996) 719-772?. Hamilton, ON, Canada : Canadian Society for Mechanical Engineering.

Thomas, M., Beauchamp, Y. et Arteau, J.. 1996. « Mechanical measurements of the hardness of treated wood utility poles for evaluating climbability ». In Proceedings of the International Conference on Computers & Industrial Engineering (Kyongju, Korea, Oct. 6-9, 1996) pp. 1051-1054. Computers and Industrial Engineering.

Youssef, Youssef A. et Doré, S.. 1996. « Quality principles on campus: a winning strategy for student competitions ». In Quality for a better life: the eleventh International Conference of the Israel Society for quality, November 19-21, 1996, Jerusalem, Israel, proceedings (Jerusalem, Israel, Nov. 19-21, 1996) Jerusalem, Israel : ISAS International Seminars.

Communication

Arteau, Jean et Beauchamp, Yves. 1996. « Efficacité, fiabilité et convivialité : trois critères d'évaluation des équipements de protection ». Communication lors de la conférence : Conférence-midi d l'IRSST (Montréal, QC, Canada, 4 avr. 1996).

Balazinski, M. et Kajl, Stanislaw. 1996. « Application de la logique floue aux problèmes d'ingénierie ». Communication lors de la conférence : Colloque multidisciplinaire L'intelligence artificielle dans les technologies de l'information tenu dans le cadre du Congrès de l'ACFAS (Montréal, QC, Canada, 13-17 mai 1996).

Cheriet, Mohamed, Crevier, Daniel, de Guise, Jacques A., Doré, Sylvie, Dumouchel, Pierre, Lepage, Richard, Noumeir, Rita et Sabourin, Robert. 1996. « Présentation des activités du laboratoire d'imagerie, de vision et d'intelligence artificielle ». Communication lors de la conférence : Conférence-midi du Département de Génie Électrique de l'ÉTS (Montréal, QC, Canada, 15 févr. 1996).

Lê, Van Ngan, Ngô, Anh Dung, Hô, N.S. et Huynh, N.. 1996. « 3-D knee orthosis: part 2 - Experimental and finite element analysis of coupled knee-orthosis stiffness ». Communication lors de la conférence : 1996 Annual Scientific Meeting of the Canadian Academy of Sport Medecine (Montreal, QC, Canada, Feb. 14-17, 1996).

Marzenska, B., Marchand, D., Beauchamp, Yves et Bélanger, M.. 1996. « Augmentation de la demande musculaire reliée à l'incertitude de la charge à manipuler ». Communication lors de la conférence : 9e Rencontre Annuelle de l'Association Québécoise des Sciences de l'Activité Physique (AQSAP), mars 1996).

Masounave, Jacques et Scheed, L.. 1996. « Le comportement en usure des composites à matrice métallique ». Communication lors de la conférence : Conférences du CETIM, déc. 1996).

Pomié, L., Scheed, L. et Masounave, Jacques. 1996. « Behavior of metallic matrix composite reinforced by large particles in dry friction ». Communication lors de la conférence : International Symposium on Recent Development in Light Metals (Montreal, QC, Canada, Aug., 1996).

Tessier, D. et Doré, Sylvie. 1996. « Conception d'un simulateur expérimental de genou ». Communication lors de la conférence : 4e Congrès de l'Association Québécoise des Fabricants de l'Industrie Médicale (AQFIM) (Montréal, QC, Canada, nov. 1996).

Cette liste a été générée le Thu Mar 28 01:48:36 2024 EDT.