| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Liste des publications de "Chatelain, Jean-François"Nombre de documents archivés : 130. 2024
Grine, Madani, Slamani, Mohamed, Laouissi, Aissa, Arslane, Mustapha, Rokbi, Mansour et Chatelain, Jean-François.
2024.
« Enhanced investigations and modeling of surface roughness of epoxy/Alfa fiber biocomposites using optimized neural network architecture with genetic algorithms ».
International Journal of Advanced Manufacturing Technology, vol. 130, nº 5-6.
pp. 3115-3132.
Slamani, Mohamed, Makri, Hocine, Boudilmi, Aissa, Bonev, Ilian A. et Chatelain, Jean-François.
2024.
« Calibration strategies for enhancing accuracy in serial industrial robots for orbital milling applications ».
Industrial Robot.
2023
Grine, Madani, Slamani, Mohamed, Arslane, Mustapha, Rokbi, Mansour et Chatelain, Jean-François.
2023.
« Investigation of the machining behavior of unidirectional Alfa (Stipa tenacissima L.)/epoxy composite material ».
International Journal of Advanced Manufacturing Technology, vol. 128, nº 7-8.
pp. 3183-3196. 2022Amjadian, A., Chatelain, J-F. et Shariari, D.. 2022. « Prediction of geometrical errors of thin floor components in milling using a flexible fixturing setup ». Communication lors de la conférence : IAARHIES 280th International Conference on Engineering & Technology, ICET (Vancouver, BC, Canada, Feb. 24-25, 2022).
Amjadian, Amir, Chatelain, Jean-François et Shahriari, Davood.
2022.
« Prediction of geometrical errors of thin floor components in milling using a flexible fixturing setup ».
Journal of Advanced Research in Engineering & Technology, vol. 6, nº 1.
pp. 1-5.
Arslane, Mustapha, Slamani, Mohamed, Aoufi, Belkacem et Chatelain, Jean-François.
2022.
« Locator placement optimization during machining turbine blades using genetic algorithm ».
In ICAENS : 3rd International Conference on Applied Engineering and Natural Sciences ICAENS : Proceedings Book (Konya, Turkey, July 20-23, 2022)
pp. 1169-1173.
Grine, Madani, Slamani, Mohamed, Arslane, Mustapha et Chatelain, Jean-François.
2022.
« Assessment of the hole quality during drilling alfa fiber (Stipa tenacissima) reinforced composites ».
In ICAENS : 3rd International Conference on Applied Engineering and Natural Sciences ICAENS : Proceedings Book (Konya, Turkey, July 20-23, 2022)
pp. 2023-2028.
Jamshidi, Maryam, Chatelain, Jean-François, Rimpault, Xavier et Balazinski, Marek.
2022.
« Tool condition monitoring based on the fractal analysis of current and cutting force signals during CFRP trimming ».
International Journal of Advanced Manufacturing Technology, vol. 121, nº 11-12.
pp. 8127-8142.
Jamshidi, Maryam, Chatelain, Jean-François, Rimpault, Xavier et Balazinski, Marek.
2022.
« Tool condition monitoring using machine tool spindle electric current and multiscale analysis while milling steel alloy ».
Journal of Manufacturing and Materials Processing, vol. 6, nº 5.
Mathieu, Ronan, Charfi, Mohamed Ali, Chatelain, Jean-François, Ouellet-Plamondon, Claudiane, Serra, Roger et Lebrun, Gilbert.
2022.
« Effect of graphene additive on cutting forces and temperature during the trimming process of CFRP ».
International Journal of Advanced Manufacturing Technology, vol. 122, nº 9-10.
pp. 3969-3981.
Mechta, Ahlem, Slamani, Mohamed, Zaoui, Moussa et Chatelain, Jean-François.
2022.
« A comparative evaluation of the performance of three CNC machine tools ».
In ICAENS : 3rd International Conference on Applied Engineering and Natural Sciences ICAENS : Proceedings Book (Konya, Turkey, July 20-23, 2022)
pp. 686-691.
Mechta, Ahlem, Slamani, Mohamed, Zaoui, Moussa, Mayer, René et Chatelain, Jean-François.
2022.
« Correlation assessment and modeling of intra-axis errors of prismatic axes for CNC machine tools ».
International Journal of Advanced Manufacturing Technology, vol. 120.
pp. 5093-5115.
Slamani, M., Chafai, H. et Chatelain, J. F..
2022.
« Effect of milling parameters on the surface quality of a flax fiber-reinforced polymer composite ».
Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering.
2021
Arslane, Mustapha, Slamani, Mohamed et Chatelain, Jean-François.
2021.
« Development and validation of a machining fixture for complex-shaped components based on Pluckerian matrix approach and SDT concept ».
International Journal of Advanced Manufacturing Technology, vol. 114.
pp. 1697-1716.
Castillo-Morales, Arquimedes, Rimpault, Xavier, Chatelain, Jean-François et Lebrun, Gilbert.
2021.
« Temperature study during the edge trimming of carbon fiber-reinforced plastic [0]8 /ti6al4v stack material ».
Journal of Composites Science, vol. 5, nº 5.
Demers, Vincent, Lamarre, Simon et Chatelain, Jean-François (inventeurs) 16 février 2021. « Low-pressure powder injection molding machine, kit and method ». École de technologie supérieure (titulaire(s)). US 10,919,092.
Slamani, Mohamed, Chatelain, Jean-Francois, Il, Alexandre et Balazinski, Marek.
2021.
« Statistical analysis and modeling of temperature distribution during various milling operations of thin walled aircraft parts ».
Physica A: Statistical Mechanics and its Applications, vol. 570.
Slamani, Mohamed, Karabibene, Nouha, Chatelain, Jean-François et Beauchamp, Yves.
2021.
« Edge trimming of flax fibers and glass fibers reinforced polymers composite – An experimental comparative evaluation ».
International Journal of Material Forming, vol. 14, nº 6.
pp. 1497-1510.
Slamani, Mohamed, Karabibene, Nouha, Chatelain, Jean-Francois, Rimpault, Xavier et Beauchamp, Yves.
2021.
« Statistical analysis of surface roughness during high speed edge trimming of flax-fiber composite based on the Split-Split plot randomized complete block design ».
Measurement: Journal of the International Measurement Confederation, vol. 184.
Xing, K., Rimpault, X., Mayer, J. R. R., Chatelain, J. F. et Achiche, S..
2021.
« Quantitative assessment of machine tools precision states through fractal analysis of machine error parameters ».
In 14th International Conference on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance (LAMDAMAP) (En ligne, Mar. 10-11, 2021)
pp. 43-52.
euspen. 2020
Charfi, Mohamed Ali, Mathieu, Ronan, Chatelain, Jean-François, Ouellet-Plamondon, Claudiane et Lebrun, Gilbert.
2020.
« Effect of graphene additive on flexural and interlaminar shear strength properties of carbon fiber-reinforced polymer composite ».
Journal of Composites Science, vol. 4, nº 4.
Jamshidi, Maryam, Rimpault, Xavier, Balazinski, Marek et Chatelain, Jean-François.
2020.
« Fractal analysis implementation for tool wear monitoring based on cutting force signals during CFRP/titanium stack machining ».
International Journal of Advanced Manufacturing Technology, vol. 106, nº 9-10.
pp. 3859-3868.
Saadati, Yousef, Chatelain, Jean-François, Lebrun, Gilbert, Beauchamp, Yves, Bocher, Philippe et Vanderesse, Nicolas.
2020.
« A study of the interlaminar fracture toughness of unidirectional flax/epoxy composites ».
Journal of Composites Science, vol. 4, nº 2.
Saadati, Yousef, Lebrun, Gilbert, Bouvet, Christophe, Chatelain, Jean-François et Beauchamp, Yves.
2020.
« Study of translaminar fracture toughness of unidirectional flax/epoxy composite ».
Composites Part C: Open Access, vol. 1.
Saadati, Yousef, Lebrun, Gilbert, Chatelain, Jean-François et Beauchamp, Yves.
2020.
« Experimental investigation of failure mechanisms and evaluation of physical/mechanical properties of unidirectional flax–epoxy composites ».
Journal of Composite Materials, vol. 54, nº 20.
pp. 2781-2801.
Slamani, Mohamed et Chatelain, Jean-François.
2020.
« Kriging versus Bezier and regression methods for modeling and prediction of cutting force and surface roughness during high speed edge trimming of carbon fiber reinforced polymers ».
Measurement: Journal of the International Measurement Confederation, vol. 152.
2019
Chatelain, Jean-François, Ouellet-Plamondon, C. M., Lasseur, B. et Kuate-Togue, H..
2019.
« Effect of additives on the machinability of glass fiber reinforced polymer ».
In
Materials Design and Applications II.
Coll. « Advanced Structured Materials », vol. 98.
pp. 295-312. Cham, Suisse : Springer Verlag.
El-Ghaoui, Khalid, Chatelain, Jean-François et Ouellet-Plamondon, Claudiane.
2019.
« Effect of graphene on machinability of glass fiber reinforced polymer (GFRP) ».
Journal of Manufacturing and Materials Processing, vol. 3, nº 3.
El-Ghaoui, Khalid, Chatelain, Jean-François, Ouellet-Plamondon, Claudiane et Mathieu, Ronan.
2019.
« Effects of nano organoclay and wax on the machining temperature and mechanical properties of Carbon Fiber Reinforced Plastics (CFRP) ».
Journal of Composites Science, vol. 3, nº 3.
Généreux, Louis-Alexandre, Lebrun, Gilbert, Viens, Martin et Chatelain, Jean-François.
2019.
« Evaluation of machining defects in a composite laminate by combining non-destructive and tensile testing ».
In
Materials Design and Applications II.
Coll. « Advanced Structured Materials », vol. 98.
pp. 341-362. Cham, Suisse : Springer Verlag.
Saadati, Yousef, Chatelain, Jean-François, Lebrun, Gilbert et Beauchamp, Yves.
2019.
« Comparison of density measurement methods for unidirectional flax-epoxy polymer composites ».
In European Conference on Multifunctional Structures (EMuS) (Barcelona, Spain, June, 11-12)
pp. 75-80.
International Centre for Numerical Methods in Engineering (CIMNE).
Saadati, Yousef, Chatelain, Jean-François, Lebrun, Gilbert et Beauchamp, Yves.
2019.
« Tension and compression properties of unidirectional flax fibre-reinforced epoxy composites for modeling of machining processes ».
In 27th Canadian Congress of Applied Mechanics (CANCAM) (Sherbrooke, QC, Canada, May 27-30, 2019)
Slamani, Mohamed et Chatelain, Jean-François.
2019.
« Assessment of the suitability of industrial robots for the machining of carbon-fiber reinforced polymers (CFRPs) ».
Journal of Manufacturing Processes, vol. 37.
pp. 177-195.
Slamani, Mohamed, Chatelain, Jean-Francois et Hamedanianpour, Hossein.
2019.
« Influence of machining parameters on surface quality during high speed edge trimming of carbon fiber reinforced polymers ».
International Journal of Material Forming, vol. 12, nº 3.
pp. 331-353.
Xing, Kanglin, Rimpault, Xavier, Mayer, J. R. R., Chatelain, Jean-François et Achiche, Sofiane.
2019.
« Five-axis machine tool fault monitoring using volumetric errors fractal analysis ».
CIRP Annals, vol. 68, nº 1.
pp. 555-558.
Xing, Kanglin, Rimpault, Xavier, Mayer, J. R. R., Chatelain, Jean-François et Achiche, Sofiane.
2019.
« Quantitative assessment of machine tools condition through fractal analysis of volumetric error vector similarity measures ».
In 7th CIRP Global Web Conference (CIRPe) (En ligne, Oct. 16-19, 2019)
Coll. « Procedia CIRP », vol. 86.
pp. 145-150.
Berlin, Germany : Elsevier B.V.. 2018
Caggiano, Alessandra, Rimpault, Xavier, Teti, Roberto, Balazinski, Marek, Chatelain, Jean-Francois et Nele, Luigi.
2018.
« Machine learning approach based on fractal analysis for optimal tool life exploitation in CFRP composite drilling for aeronautical assembly ».
CIRP Annals, vol. 67, nº 1.
pp. 483-486.
Coulon, Pierre, Chatelain, Jean-François, Dubé, Martine et Rimpault, Xavier.
2018.
« Effect of curing pressure on machinability of carbon fiber composite ».
In 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest, Hungary, June 25-27, 2018)
Coll. « Procedia CIRP », vol. 77.
pp. 307-310.
Elsevier.
Il, Alexandre, Chatelain, Jean-François, Lalonde, Jean-François, Balazinski, Marek et Rimpault, Xavier.
2018.
« An experimental investigation of the influence of cutting parameters on workpiece internal temperature during Al2024-T3 milling ».
International Journal of Advanced Manufacturing Technology, vol. 97, nº 1-4.
pp. 413-426.
Karabibene, N., Chatelain, J-F., Beauchamp, Y. et Lebrun, G..
2018.
« Effect of machining parameters on the quality of a flax fiber reinforced polymer composite ».
In International Conference on Industry, Engineering, and Management Systems (IEMS 2018) (Cocoa Beach, FL, USA, Mar. 19-21, 2018)
Karabibene, N., Chatelain, J-F., Beauchamp, Y. et Lebrun, G..
2018.
« Effect of machining parameters on the uncut fibers of a unidirectional flax fiber reinforced composite ».
Journal of Management and Engineering Integration, vol. 11, nº 1.
Kuate-Togue, H., Chatelain, J-F. et Ouellet-Plamondon, C..
2018.
« Effect of additives on cutting temperature of glass fibers reinforced polymers ».
In Proceedings of The Canadian Society for Mechanical Engineering International Congress (CSME) (Toronto, ON, Canada, May 27-30, 2018)
CSME.
Rimpault, X., Chatelain, J-F. et Balazinski, M..
2018.
« Fractal analysis applications for improving monitoring and prediction systems in machining ».
In 7th International Conference on Virtual Machining Process Technology (VMPT 2018) (Hamilton, ON, Canada, May 07-09, 2018)
Rimpault, Xavier, Balazinski, Marek et Chatelain, Jean-François.
2018.
« Fractal analysis application outlook for improving process monitoring and machine maintenance in manufacturing 4.0 ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 3.
Rimpault, Xavier, Il, Alexandre, Chatelain, Jean-François, Lalonde, Jean-François et Balazinski, Marek.
2018.
« Workpiece subsurface temperature study during aluminum skin milling in slotting and ramping ».
In 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest, Hungary, June 25-27, 2018)
Coll. « Procedia CIRP », vol. 77.
pp. 417-420.
Elsevier. 2017
Daoud, M., Chatelain, J. F. et Bouzid, A..
2017.
« Effect of rake angle-based Johnson-Cook material constants on the prediction of residual stresses and temperatures induced in Al2024-T3 machining ».
International Journal of Mechanical Sciences, vol. 122.
pp. 392-404.
Delahaigue, J., Chatelain, J. F. et Lebrun, G..
2017.
« Machining analysis of unidirectional and bi-directional flax-epoxy composite laminates ».
[Article de conférence]. Proceedings of the Institution of Mechanical Engineers, Part L : Journal of Materials: Design and Applications, vol. 231, nº 1-2.
pp. 196-209.
Delahaigue, Jérémy, Chatelain, Jean-Francois et Lebrun, Gilbert.
2017.
« Influence of cutting temperature on the tensile strength of a carbon fiber-reinforced polymer ».
Fibers, vol. 5, nº 4.
Ghafarizadeh, Seyedbehzad, Tahvilian, Amir Masoud, Chatelain, Jean-François, Liu, Zhaoheng, Champliaud, Henri et Lebrun, Gilbert.
2017.
« Numerical simulation of ball-end milling with SPH method ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 1.
pp. 401-408.
Karabibene, K., Chatelain, J.-F., Beauchamp, Y. et Lebrun, G..
2017.
« Optimization of machining parameters for the trimming process of unidirectional flax fiber composites ».
In 10th Canadian-International Conference on Composites (Ottawa, ON, Canada, July 17-20, 2017)
Lamarre, Simon G., Demers, Vincent et Chatelain, Jean-François.
2017.
« Low-pressure powder injection molding using an innovative injection press concept ».
International Journal of Advanced Manufacturing Technology, vol. 91, nº 5-8.
pp. 2595-2605.
Rimpault, X., Chatelain, J. F., Klemberg-Sapieha, J. E. et Balazinski, M..
2017.
« Tool wear and surface quality assessment of CFRP trimming using fractal analyses of the cutting force signals ».
CIRP Journal of Manufacturing Science and Technology, vol. 16.
pp. 72-80.
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, Jolanta Ewa et Balazinksi, Marek.
2017.
« Burr height monitoring while drilling of CFRP/titanium/aluminium stacks ».
Mechanics & Industry, vol. 18, nº 1.
Slamani, M., Djeffal, S. et Chatelain, J-F..
2017.
« Experimental investigation of robotic machining errors of carbon fiber reinforced polymers ».
In La 3ème Conférence Internationale de Mécanique (ICM) (Annaba, Algérie, 26-27 avril 2017)
2016
Ghafarizadeh, Seyedbehzad, Chatelain, Jean-François et Lebrun, Gilbert.
2016.
« Effect of cutting tool lead angle on machining forces and surface finish of CFRP laminates ».
Science and Engineering of Composite Materials, vol. 23, nº 5.
pp. 543-550.
Ghafarizadeh, Seyedbehzad, Chatelain, Jean-François et Lebrun, Gilbert.
2016.
« Finite element analysis of surface milling of carbon fiber-reinforced composites ».
International Journal of Advanced Manufacturing Technology, vol. 87, nº 1.
pp. 399-409.
Ghafarizadeh, Seyedbehzad, Lebrun, Gilbert et Chatelain, Jean-François.
2016.
« Experimental investigation of the cutting temperature and surface quality during milling of unidirectional carbon fiber reinforced plastic ».
Journal of Composite Materials, vol. 50, nº 8.
pp. 1059-1071.
Lamarre, S. G., Demers, V. et Chatelain, J-F..
2016.
« Experimental study of the rheological properties and moldability of wax-based feedstocks used in low-pressure powder injection molding ».
In MONTREAL’2016 AES-ATEMA 28th International on Advances and Trends in Engineering Materials and their Applications (Montreal, QC, Canada, June 20-24, 2016)
pp. 175-183.
Advanced Engineering Solutions. Lamarre, S., Demers, V. et Chatelain, J. F.. 2016. « Moldability of feedstock for LPIM ». Affiche présentée lors de la conférence : ASM-Montréal : Soirée des étudiants (Montréal, QC, Canada, 9 mars 2016).
Rimpault, X., Chatelain, J. F., Klemberg-Sapieha, J. E. et Balazinski, M..
2016.
« Surface profile texture characterization of trimmed laminated composite in the stacking sequence direction ».
Measurement, vol. 91.
pp. 84-92.
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, Jolanta E. et Balazinski, Marek.
2016.
« Surface profile topography of trimmed and drilled carbon/epoxy composite ».
In 3rd CIRP Conference on Surface Integrity (Charlotte, NC, United states, June 8-10, 2016)
Coll. « Procedia CIRP », vol. 45.
pp. 27-30.
Elsevier.
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, Jolanta-Ewa et Balazinski, Marek.
2016.
« Fractal analysis of cutting force and acoustic emission signals during CFRP machining ».
In 7th CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016)
Coll. « Procedia CIRP », vol. 46.
pp. 143-146.
Elsevier.
Slamani, Mohamed, Gauthier, Sébastien et Chatelain, Jean-François.
2016.
« Comparison of surface roughness quality obtained by high speed CNC trimming and high speed robotic trimming for CFRP laminate ».
Robotics and Computer-Integrated Manufacturing, vol. 42.
pp. 63-72. 2015
Daoud, M., Chatelain, J. F. et Bouzid, A..
2015.
« Effect of rake angle on Johnson-Cook material constants and their impact on cutting process parameters of Al2024-T3 alloy machining simulation ».
International Journal of Advanced Manufacturing Technology, vol. 81, nº 9-12.
pp. 1987-1997.
Daoud, M., Jomaa, W., Chatelain, J. F. et Bouzid, A..
2015.
« A machining-based methodology to identify material constitutive law for finite element simulation ».
International Journal of Advanced Manufacturing Technology, vol. 77, nº 9-12.
pp. 2019-2033.
Mullier, Guillaume et Chatelain, Jean-François.
2015.
« Influence of thermal damage on the mechanical strength of trimmed CFRP ».
International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, vol. 9, nº 8.
pp. 1509-1516.
Mullier, Guillaume et Chatelain, Jean-François.
2015.
« Influence of thermal damage on the mechanical strength of trimmed CFRP ».
In 17th International Conference on Materials Science, Metal and Manufacturing (ICMSMM 2015) (Barcelona, Spain, Aug. 17-18, 2015)
Mullier, Guillaume et Chatelain, Jean-François. 2015. « Influence of thermal damage on the mechanical strength of trimmed CFRP ». Communication lors de la conférence : 17th International Conference on Materials Science, Metal and Manufacturing (ICMSMM 2015) (Barcelona, Spain, Aug. 17-18, 2015).
Nguyen, Sy Quy et Chatelain, Jean-Francois.
2015.
« Study of the milling process for thin components using a flexible setup configuration ».
[Article de conférence]. Applied Mechanics and Materials, vol. 704.
pp. 27-31.
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, J.E. et Balazinksi, M..
2015.
« A new approach for surface profile roughness characterization in the laminated composite ply plane ».
In 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference (Montreal, QC, Canada, May 19-21, 2015)
Canadian Aeronautics and Space Institute.
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, J.E. et Balazinski, M..
2015.
« Surface condition of high speed trimming of CFRP ».
In 6th International Conference on science and technology of composite materials (COMAT) (Buenos Aires, Argentina, May 7-8, 2015)
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, Jolanta E. et Balazinksi, Marek.
2015.
« Surface quality assessment of CFRP high speed trimming using fractal analyses of the cutting force signals ».
In 4th international conference on virtual machining process technology (VMPT 2015) (Vancouver, BC, Canada, June 2-5, 2015)
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, Jolanta E. et Balazinksi, Marek.
2015.
« Tool wear impact on surface roughness condition of CFRP high speed trimming ».
In 4th international conference on virtual machining process technology (VMPT 2015) (Vancouver, BC, Canada, June 2-5, 2015)
Slamani, M. et Chatelain, J. F..
2015.
« High-speed robotic trimming of CFRP ».
In
Machinability of Fibre-Reinforced Plastics.
Coll. « Advanced Composites », vol. 4.
pp. 83-101. De Gruyter.
Slamani, Mohamed et Chatelain, Jean-François.
2015.
« Issues and challenges in robotic trimming of CFRP ».
In ICINCO 2015 - 12th International Conference on Informatics in Control, Automation and Robotics, Proceedings (Colmar, Alsace, France, July 21-23, 2015)
pp. 400-405.
SciTePress. Slamani, Mohamed et Chatelain, Jean-François. 2015. « Issues and challenges in robotic trimming of CFRP ». Communication lors de la conférence : ICINCO 2015 - 12th International Conference on Informatics in Control, Automation and Robotics (Colmar, Alsace, France, July 21-23, 2015).
Slamani, Mohamed, Chatelain, Jean-François et Hamedanianpour, Hossein.
2015.
« Comparison of two models for predicting tool wear and cutting force components during high speed trimming of CFRP ».
International Journal of Material Forming, vol. 8, nº 2.
pp. 305-316.
Slamani, Mohamed, Gauthier, Sébastien et Chatelain, Jean-François.
2015.
« A study of the combined effects of machining parameters on cutting force components during high speed robotic trimming of CFRPs ».
Measurement: Journal of the International Measurement Confederation, vol. 59.
pp. 268-283. 2014
Daoud, M., Jomaa, W., Chatelain, Jean-François, Bouzid, Abdel-Hakim et Songmene, Victor.
2014.
« Identification of material constitutive law constants using machining tests: A response surface methodology based approach ».
In 2014 International Conference on High Performance and Optimum Design of Structures and Materials, HPSM 2014 which incorporated the Seminar on Optimum Design in Engineering, OPTI 2014 (Ostend, Belgium, June 9-11, 2014)
Coll. « WIT Transactions on the Built Environment »
pp. 25-36.
WITPress.
Daoud, Monzer, Chatelain, Jean-François et Bouzid, Hakim.
2014.
« On the effect of Johnson Cook material constants to simulate Al2024-T3 machining using finite element modeling ».
In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014)
American Society of Mechanical Engineers (ASME).
Ghafarizadeh, Seyedbehzad, Chatelain, Jean-François et Lebrun, Gilbert.
2014.
« Experimental investigation to study cutting temperature during milling of unidirectional Carbon Fiber Reinforced Plastic ».
In ASME 2014 International Mechanical Engineering Congress and Exposition, IMECE 2014, November 14, 2014 - November 20, 2014 (Montreal, QC, Canada, Nov. 14-20, 2014)
Montreal, QC, Canada : American Society of Mechanical Engineers (ASME).
Jomaa, Walid, Daoud, Monzer, Songmene, Victor, Bocher, Philippe et Châtelain, Jean-François.
2014.
« Identification and validation of Marusich's constitutive law for finite element modeling of high speed machining ».
In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014)
American Society of Mechanical Engineers (ASME).
Slamani, Mohamed, Gauthier, Sébastien et Chatelain, Jean-François.
2014.
« Analysis of trajectory deviation during high speed robotic trimming of carbon-fiber reinforced polymers ».
Robotics and Computer-Integrated Manufacturing, vol. 30, nº 5.
pp. 546-555. 2013
Ghafarizadeh, S. B., Chatelain, J. F. et Lebrun, G..
2013.
« Multi axis machining of high performance CFRP for aerospace industry ».
In 19th International Conference on Composite Materials (ICCM 2013) (Montreal, QC, Canada, July 28 - Aug. 02, 2013)
pp. 4027-4034.
International Committee on Composite Materials.
Hamedanianpour, Hossein et Chatelain, Jean-François.
2013.
« Effect of tool wear on quality of carbon fiber reinforced polymer laminate during edge trimming ».
In Manufacturing Engineering and Process II (Vancouver, B.C., Canada, Apr. 13-14, 2013)
Coll. « Applied Mechanics and Materials », vol. 325-326.
pp. 34-39.
Zurich-Durnten, Switzerland : Trans Tech Publications Ltd. 2012
Chatelain, Jean-François.
2012.
« A university-industry research collaboration for the optimization of the machining process of multilayer materials for the aerospace industry ».
Journal of Management and Engineering Integration, vol. 5, nº 1.
pp. 23-33.
Chatelain, Jean-François, Lalonde, Jean-François et Tahan, Antoine S..
2012.
« Effect of Residual Stresses Embedded within Workpieces on the Distortion of Parts after Machining ».
International Journal of Mechanics, vol. 6, nº 1.
pp. 43-51.
Chatelain, Jean-François et Zaghbani, Imed.
2012.
« A Comparison of Special Helical Cutter Geometries Based on Cutting Forces for the Trimming of CFRP Laminates ».
International Journal of Mechanics, vol. 6, nº 1.
pp. 52-59.
Chatelain, Jean-François, Zaghbani, Imed et Monier, Joseph.
2012.
« Effect of Ply Orientation on Roughness for the Trimming Process of CFRP Laminates ».
World Academy of Science, Engineering & Technology, vol. 6, nº 8.
pp. 988-994.
St-Pierre, Benoit, Chatelain, Jean-François et Dufresne, Louis.
2012.
« Développement d’un modèle semi-empirique pour la prédiction de la cohérence d’un jet utilisé dans les procédés de rectification ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 36, nº 2.
pp. 127-142.
Zaghbani, Imed, Chatelain, Jean-Fraçois, Songmene, Victor, Bérubé, Sébastien et Atarsia, Abdelatif.
2012.
« A comprehensive analysis of cutting forces during routing of multilayer carbon fiber-reinforced polymer laminates ».
Journal of Composite Materials, vol. 46, nº 16.
pp. 1955-1971.
Zaghbani, Imed, Chatelain, Jean-François, Bérubé, Sébastien, Songmene, Victor et Lance, Justin.
2012.
« Analysis and modelling of cutting forces during the trimming of unidirectional CFRP composite laminates ».
International Journal of Machining and Machinability of Materials, vol. 12, nº 4.
pp. 337-357. 2011
Chatelain, Jean-François, Lalonde, J. F. et Tahan, Antoine.
2011.
« A comparison of the distortion of machined parts resulting from residual stresses within workpieces ».
In 4th International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS) (Barcelona, Spain, Sept. 15-17, 2011)
pp. 79-84.
World Scientific and Engineering Academy and Society.
Chatelain, Jean-François et Zaghbani, Imed.
2011.
« Effect of tool geometry special features on cutting forces of multilayered CFRP laminates ».
In 4th International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS) (Barcelona, Spain, Sept. 15-17, 2011)
pp. 85-90.
World Scientific and Engineering Academy and Society.
St-Martin, Serge, Chatelain, Jean-François, Mayer, René, Engin, Serafettin et Chalut, Stéphane.
2011.
« Prediction of thin wall surface shape through simulation of the machining process for light alloy workpieces ».
Journal of Machining and Forming Technologies, vol. 3, nº 3-4.
pp. 185-202.
Zaghbani, I., Chatelain, J.-F., Songmene, V., Bérubé, S. et Atarsia, A..
2011.
« Modeling of cutting forces for multilayered CFRP laminates ».
In 26th Annual Technical Conference of the American Society for Composites : 2nd Joint US-Canada Conference on Composites (Montreal, QC, Canada, Sept. 26-28, 2011)
pp. 1224-1233.
DEStech Publications. 2009
St-Martin, Serge, Chatelain, Jean-François, Mayer, René et Paris, H..
2009.
« Étude du comportement dynamique d'une paroi mince en alliage léger durant une opération d'usinage haute vitesse ».
Revue d'Ingénierie Numérique Collaborative, vol. 3, nº 1.
2008
Chatelain, Jean-François, Roy, Réjean et Mayer, René.
2008.
« Development of a spiral trajectory for high speed roughing of light alloy aerospace components ».
WSEAS Transactions on Applied and Theoretical Mechanics, vol. 3, nº 3.
pp. 83-93.
Roy, R., Chatelain, Jean-François, Mayer, R., Chalut, S. et Engin, S..
2008.
« Optimization of adaptive spiral toolpaths for pocket machining ».
In International Computer Aided Design Conference and Exhibition (CAD) (Orlando, FL, USA, June 23-27, 2008)
Roy, R., Chatelain, Jean-François, Mayer, R., Chalut, S. et Engin, S..
2008.
« Programming of a machining procedure for adaptive spiral cutting trajectories ».
In 10th WSEAS International Conference on Automatic Control, Modelling and Simulation (ACMOS) (Istanbul, Turkey, May 27-30, 2008)
pp. 127-132.
Stevens Point, Wisconsin, USA : World Scientific and Engineering Academy and Society (WSEAS).
St-Martin, S., Chatelain, Jean-François, Mayer, R., Engin, S. et Chalut, S..
2008.
« Simulation de l'usinage de finition des parois minces de composantes aéronautiques en alliage léger ».
In Colloque sur la Recherche en Conception Assistée par Ordinateur (CAO) au Québec (Trois-Rivières, QC, Canada, 14 mai 2008)
St-Martin, Serge, Chatelain, Jean-François, Mayer, René, Engin, Serafettin et Chalut, Stéphane.
2008.
« Time domain simulation of thin wall surface finish machining for light alloy aerospace components ».
In Canadian Society for Mechanical Engineering Forum (CSME) (Ottawa, ON, Canada, June 5-8, 2008)
2007
Ben Salah, M. et Chatelain, Jean-François.
2007.
« Part localization algorithm based on constrained alignment of surface patches ».
In Proceedings - 13th ISSAT International Conference on Reliability and Quality in Design (Seattle, WA, USA, Aug. 2-4, 2007)
pp. 270-275.
Piscataway, N. J., USA : International Society of Science and Applied Technologies.
Salah, B. et Chatelain, Jean-François.
2007.
« Part localization based on a surface patch alignment algorithm ».
In 2e Congrès International en Conception et Modélisation des Systèmes Mécaniques (CMSM) (Monastir, Tunisia, Mar. 19-21, 2007)
2006
Soufi, K., Chatelain, Jean-François et Maranzana, Roland.
2006.
« A product change management system based on active features ».
In 16th CIRP International Design Seminar, Design & Innovation for Sustainable Society (Kananaskis, AB, Canada, July 16-19, 2006)
2005
Chatelain, Jean-François.
2005.
« A level-based optimization algorithm for complex part localization ».
Precision Engineering, vol. 29, nº 2.
197–207. 2004
Antri, B., Chatelain, Jean-François et Marchand, Françoise.
2004.
« An integrated information model for the dimensional and geometrical inspection of mechanical parts ».
In 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME) (Bath, UK, Apr. 5-7, 2004)
p. 43.
Bath, UK : University of Bath.
Chatelain, Jean-François, Boutin, Y., Marchand, Françoise et Tahan, Antoine.
2004.
« Productivity assessment from advanced integration of canned cycles to CAD/CAM software ».
WSEAS Transactions on Systems, vol. 3, nº 3.
pp. 1187-92.
Fortin, Étienne, Chatelain, Jean-François et Rivest, Louis.
2004.
« An innovative software architecture to improve information flow from CAM to CNC ».
Computers & Industrial Engineering, vol. 46, nº 4.
pp. 655-667.
Fortin, Étienne, Rivest, Louis et Chatelain, Jean-François.
2004.
« Combiner de multiple langages pour la programmation des contrôleurs de machines-outils à architecture ouverte ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 28, nº 3-4.
pp. 511-530. Tahan, Antoine, Songmene, Victor et Chatelain, Jean-François. 2004. « Case study of the application of statistical tolerances taking account of correlation ». Communication lors de la conférence : International Conference on Computers and Industrial Engineering (San Francisco, CA, USA, Nov., 2004). 2003Amtout, Y., Songmene, Victor et Chatelain, Jean-François. 2003. « Optimisation de trajectoires d'outils en FAO pour l'usinage à haute performance des moules en P20 ». Communication lors de la conférence : 4th International Conference on Industrial Automation (Montreal, QC, Canada, June 9, 2003). Chatelain, Jean-François. 2003. « Laboratoire d'ingénierie des produits, procédés et systèmes de l'ÉTS ». Communication lors de la conférence : 3e Journée d'Étude Interinstitutionnelle du Centre de Recherche en Fabrication Haute Performance (Bécancour, QC, Canada, 21 nov. 2003). Chatelain, Jean-François et Boutin, Y.. 2003. « Intégration de cycles d'usinage avancés aux logiciels de CFAO ». Communication lors de la conférence : 4th International Conference on Industrial Automation (Montreal, QC, Canada, June 9, 2003). 2002Boutin, Y. et Chatelain, Jean-François. 2002. « Intégration des cycles d'usinage avancés aux logiciels de FAO ». Communication lors de la conférence : Séminaire sur l'Usinage à Grande Vitesse (Longueuil, QC, Canada, sept. 2002).
Châtelain, Jean-François.
2002.
« Développement d'un post-processeur et d'un simulateur pour une machine 5 axes (phase 1) ».
In Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2000-2001 : Actes (Montréal, QC, Canada, 31 mai 2001)
pp. 43-48.
École de technologie supérieure.
Châtelain, Jean-François.
2002.
« Optimisation d'un post-processeur 5 axes et développement d'outillage spécialisé (phase II) ».
In Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2000-2001 : Actes (Montréal, QC, Canada, 31 mai 2001)
pp. 49-53.
École de technologie supérieure.
Chatelain, Jean-François et Fortin, C..
2002.
« Optimal workpiece localization for machining applications ».
In
Integrated design and manufacturing in mechanical engineering.
pp. 247-254. USA : Kluwer Academic Publishers.
Chatelain, Jean-François et Fortin, C..
2002.
« Optimal workpiece localization for machining applications ».
In 3rd Integrated Design and Manufacturing in Mechanical Engineering Conference (Montreal, Canada, May, 2000)
pp. 247-254.
Netherlands : Springer-Verlag.
Chatelain, Jean-François, Maranzana, Roland et St-Martin, Serge.
2002.
« A solid model comparison approach based on a model tree analysis ».
In
Advances in systems theory, mathematical methods and applications.
pp. 239-244. WSEAS Press.
Chatelain, Jean-François, Maranzana, Roland et St-Martin, Serge.
2002.
« A solid model comparison approach based on a model tree analysis ».
In 4th WSEAS International Conference on Mathematics and Computers in Physics (MCP) (Cancun, Mexico, May 12-16, 2002)
WSEAS.
Terriault, Patrick et Châtelain, Jean-François.
2002.
« Développement de travaux personnalisés en conception assistée par ordinateur ».
In Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2000-2001 : Actes (Montréal, QC, Canada, 31 mai 2001)
pp. 65-68.
École de technologie supérieure. 2001
Chatelain, Jean-François et Fortin, C..
2001.
« Balancing technique for optimal blank part machining ».
Precision Engineering, vol. 25, nº 1.
pp. 13-23.
Fortin, Étienne, Chatelain, Jean-François et Rivest, Louis.
2001.
« Improving information flow from CAM to CNC : an innovative architecture based on BNCL virtual machine ».
In 29th International Conference on Computers and Industrial Engineering (Montreal, QC, Canada, Nov. 1-3, 2001)
Montreal, Canada : École de technologie supérieure.
St-Martin, S., Chatelain, Jean-François, Rivest, Louis et Maranzana, Roland.
2001.
« L'évolution du modèle produit dans un contexte de SGDT: Vers la maîtrise du changement dans les modèles CAO ».
In 20e congrès international de la CFAO et des nouvelles technologies de conception et de fabrication (MICAD 2001) (Paris, France, 6-8 mars 2001)
2000
Chatelain, Jean-François et Fortin, C..
2000.
« Algorithme de localisation des pièces brutes pour l'usinage ».
In 3e conférence internationale sur la conception et la fabrication intégrées en mécaniques IDMME 2000 et Forum SCGM 2000 (Montréal, QC, Canada, Mai 2000)
pp. 1-10.
Maranzana, Roland, Rivest, Louis et Chatelain, Jean-François. 2000. « Systèmes de CAO et ingénierie concourante : les effets pervers ». Communication lors de la conférence : Université d'Été de Recherche Francophone, Ingénierie Simultanée et Concourante (ISC 2000) (Arc-et-Senans, France, 3-5 juil. 2000). 1999
Chatelain, Jean-François et Fortin, C..
1999.
« A CAD/CAM integrated balancing system for blank part machining ».
In Troisième conférence internationale sur l'automatisation industrielle, École de technologie supérieure, Montréal, 7-9 juin 1999 : actes de la conférence = Third International Conference on Industrial Automation, École de technologie supérieure, Montréal, (Montreal, Canada, June 7-9, 1999)
23/9-23/12.
Montreal, Canada : International Association of Industrial Automation. 1998Chatelain, Jean-François. 1998. « Alignement imposé des points de mesure dans les zones de modèles solides pour la vérification des tolérances géométriques ». Communication lors de la conférence : Forum sur la Métrologie 98 (Laval, QC, Canada, nov. 1998).
Chatelain, Jean-François.
1998.
« Constrained alignment of measurement data within CAD solid zones for geometric tolerance verification ».
In Actes du Forum Métrologie 98 (Québec, QC, Canada, nov. 1998)
Québec, QC, Canada : Université Laval. |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau