ENGLISH |
Liste des publications de "Guilbault, Raynald"Nombre de documents archivés : 64. 2024
Kared, Liticia, Lalonde, Sébastien, Langlois, Sébastien et Guilbault, Raynald.
2024.
« Numerical characterization of overhead conductor local loading conditions at wire contact points in the vicinity of suspension clamps ».
In Dynamics and Aerodynamics of Cables - ISDAC (Rome, Italy, June 15-17, 2023)
Coll. « Lecture Notes in Civil Engineering », vol. 399.
pp. 327-338.
Springer Science and Business Media Deutschland GmbH.
Lalonde, Sébastien, Kared, Liticia, Guilbault, Raynald et Langlois, Sébastien.
2024.
« 3D finite element modelling of conductor-clamp assemblies under cyclic bending: Sensitivity analysis of wire contact coefficient of friction ».
In Dynamics and Aerodynamics of Cables - ISDAC (Rome, Italy, June 15-17, 2023)
Coll. « Lecture Notes in Civil Engineering », vol. 399.
pp. 315-326.
Springer Science and Business Media Deutschland GmbH. 2023
Noel, Jean-Philippe, Guilbault, Raynald, Perreault, Christian et Zaghib, Karim.
2023.
« Numerical optimization of lithium-ion cell performance using metaheuristic algorithms ».
Journal of Energy Storage, vol. 71.
2022
Yalpanian, Ali et Guilbault, Raynald.
2022.
« A fast thermoelastic model based on the half-space theory applied to elastohydrodynamic lubrication of line contacts involving free boundaries ».
Journal of Tribology, vol. 144, nº 8.
2021
Aboussafy, Charles et Guilbault, Raynald.
2021.
« Chip formation in machining of anisotropic plastic materialsa finite element modeling strategy applied to wood ».
International Journal of Advanced Manufacturing Technology, vol. 114, nº 5/6.
pp. 1471-1486.
Guilbault, Raynald et Lalonde, Sébastien.
2021.
« Tip relief designed to optimize contact fatigue life of spur gears using adapted PSO and firefly algorithms ».
SN Applied Sciences, vol. 3, nº 1.
Yalpanian, Ali et Guilbault, Raynald.
2021.
« A systematic solution based on the half-space concept for modeling of thermoelastic contact between bodies defined by curved free boundaries ».
Acta Mechanica, vol. 232.
pp. 5003-5029. 2020
Yalpanian, Ali et Guilbault, Raynald.
2020.
« A fast correction for half-space theory applied to contact modeling of bodies with curved free surfaces ».
Tribology International, vol. 147.
2019
Ahmadabadi, Z. Nili, Guilbault, Raynald et Laville, Frédéric.
2019.
« Nonlinear dynamic modeling of pneumatic nailing devices ».
Mathematical and Computer Modelling of Dynamical Systems, vol. 25, nº 2.
pp. 195-223.
Benadda, Mohamed, Bouzidane, Ahmed, Thomas, Marc et Guilbault, Raynald.
2019.
« Dynamic behavior analysis of a rigid rotor supported by hydrostatic squeeze film dampers compensated with new electrorheological valve restrictors ».
Industrial Lubrication and Tribology, vol. 72, nº 5.
pp. 611-619.
Guilbault, Raynald et Lalonde, Sébastien.
2019.
« A stochastic prediction of roughness evolution in dynamic contact modelling applied to gear mild wear and contact fatigue ».
Tribology International, vol. 140.
2018
Benariba, Aboubakeur, Bouzidane, Ahmed, Thomas, Marc et Guilbault, Raynald.
2018.
« Numerical analysis of a rigid rotor mounted on four-pad hydrostatic squeeze film damper lubricated with micropolar lubricant ».
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 232, nº 5.
pp. 513-524.
Lalonde, Sébastien, Guilbault, Raynald et Langlois, Sébastien.
2018.
« Numerical analysis of ACSR conductor-clamp systems undergoing wind-induced cyclic loads ».
IEEE Transactions on Power Delivery, vol. 33, nº 4.
pp. 1518-1526. 2017
Ahmadabadi, Zahra Nili, Laville, Frédéric et Guilbault, Raynald.
2017.
« An empirical prediction law for quasi-static nail-particle board penetration resistance ».
In International Mechanical Engineering Congress and Exposition (IMECE 2017) (Tampa, FL, USA, Nov. 03-09, 2017)
Coll. « ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) »
ASME.
American Society of Mechanical Engineers (ASME).
Lalonde, Sébastien, Guilbault, Raynald et Langlois, Sébastien.
2017.
« Modeling multilayered wire strands, a strategy based on 3D finite element beam-to-beam contacts - Part II: Application to wind-induced vibration and fatigue analysis of overhead conductors ».
International Journal of Mechanical Sciences, vol. 126.
pp. 297-307.
Lalonde, Sébastien, Guilbault, Raynald et Légeron, Frédéric.
2017.
« Modeling multilayered wire strands, a strategy based on 3D finite element beam-to-beam contacts - Part I: Model formulation and validation ».
International Journal of Mechanical Sciences, vol. 126.
pp. 281-296. 2016
Ahmadabadi, Z. Nili, Laville, Frédéric et Guilbault, Raynald.
2016.
« Time domain identification and ranking of noise sources in a pneumatic nail gun ».
Applied Acoustics, vol. 114.
pp. 191-202.
Corriveau, Guillaume, Guilbault, Raynald, Tahan, Antoine et Sabourin, Robert.
2016.
« Bayesian network as an adaptive parameter setting approach for genetic algorithms ».
Complex & Intelligent Systems, vol. 2, nº 1.
pp. 1-22.
Guilbault, Raynald et Lalonde, Sébastien.
2016.
« Early diagnostic of concurrent gear degradation processes progressing under time-varying loads ».
Mechanical Systems and Signal Processing, vol. 76-77.
pp. 337-352. 2015
Ahmadabadi, Z. Nili, Laville, Frédéric et Guilbault, Raynald.
2015.
« An empirical prediction law for quasi-static nail-plywood penetration resistance ».
Construction and Building Materials, vol. 88.
pp. 126-133.
Ahmadabadi, Zahra Nili, Laville, Frédéric et Guilbault, Raynald.
2015.
« Study of parameters influencing pneumatic nail-gun noise ».
In 44th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2015 (San Francisco, CA, USA, Aug. 9-12, 2015)
pp. 17-28.
The Institute of Noise Control Engineering of the USA, Inc..
Corriveau, Guillaume, Guilbault, Raynald, Tahan, Antoine et Sabourin, R..
2015.
« Evaluation of genotypic diversity measurements exploited in real-coded representation ».
arXiv. 13 p.
Guilbault, Raynald, Lalonde, Sébastien et Thomas, Marc.
2015.
« Modeling and monitoring of tooth fillet crack growth in dynamic simulation of spur gear set ».
Journal of Sound and Vibration, vol. 343.
pp. 144-165.
Kedadouche, Mourad, Thomas, Marc, Tahan, Antoine et Guilbault, Raynald.
2015.
« Monitoring gears by vibration measurements: Lempel-Ziv complexity and approximate entropy as diagnostic tools ».
In 4th Colloque Experimental Vibration Analysis, AVE 2014, November 18, 2014 - November 20, 2014 (Blois, France, Nov. 18-20, 2014)
Coll. « MATEC Web of Conferences », vol. 20.
EDP Sciences.
Kedadouche, Mourad, Thomas, Marc, Tahan, Antoine et Guilbault, Raynald.
2015.
« Nonlinear parameters for monitoring gear: comparison between lempel-ziv, approximate entropy, and sample entropy complexity ».
Shock and Vibration, vol. 2015.
Najjari, Morteza et Guilbault, Raynald.
2015.
« Formula derived from particle swarm optimization (PSO) for optimum design of cylindrical roller profile under EHL regime ».
Mechanism and Machine Theory, vol. 90.
pp. 162-174. 2014
Kidar, T., Thomas, M., El Badaoui, M. et Guilbault, R..
2014.
« Control of phases by ESPRIT and WLSE methods for the early detection of gear cracks ».
Mechanics and Industry, vol. 15, nº 6.
pp. 487-495.
Kidar, Thameur, Thomas, Marc, Elbadaoui, Mohamed et Guilbault, Raynald.
2014.
« Phase Monitoring by ESPRIT with Sliding Window and Hilbert Transform for Early Detection of Gear Cracks ».
In Advances in Condition Monitoring of Machinery in Non-Stationary Operations : Proceedings of the third International Conference on Condition Monitoring of Machinery in Non-Stationary Operations CMMNO 2013 (Ferrara, Italy
Coll. « Lecture Notes in Mechanical Engineering »
pp. 287-299.
Springer Berlin Heidelberg.
Najjari, Morteza et Guilbault, Raynald.
2014.
« Edge contact effect on thermal elastohydrodynamic lubrication of finite contact lines ».
Tribology International, vol. 71.
pp. 50-61.
Najjari, Morteza et Guilbault, Raynald.
2014.
« Modeling the edge contact effect of finite contact lines on subsurface stresses ».
Tribology International, vol. 77.
pp. 78-85. 2013
Corriveau, Guillaume, Guilbault, Raynald, Tahan, Antoine et Sabourin, Robert.
2013.
« Review of phenotypic diversity formulations for diagnostic tool ».
Applied Soft Computing, vol. 13, nº 1.
pp. 9-26.
Guilbault, Raynald.
2013.
« A simplified thermal analysis of elastohydrodynamic contacts ».
Journal of Tribology, vol. 135, nº 2.
Guilbault, Raynald, Lalonde, Sebastien et Thomas, Marc.
2013.
« Corrigendum to "Nonlinear damping calculation in cylindrical gear dynamic modeling" [J. Sound Vib. 331/9 (2012) 2110–2128] ».
[Autre]. Journal of Sound and Vibration, vol. 332, nº 20.
p. 5240.
Kedadouche, M., Kidar, T., Thomas, M., Tahan, A., El Badaoui, M. et Guilbault, R..
2013.
« A comparative study between acoustic emission and vibration for early detection of gear cracks ».
In Surveillance 7 : international conference : October 29-30, 2013, Chartres, France (Chartres, France, Oct. 29-30, 2013)
France : Institute of Technology.
Kedadouche, Mourad, Kidar, Thameur, Thomas, Marc, Tahan, Antoine, El Badaoui, Mohamed et Guilbault, Raynald.
2013.
« Combining EMD and Lempel-Ziv complexity for early detection of gear cracks ».
In Surveillance 7 : international conference : October 29-30, 2013, Chartres, France (Chartres, France, Oct. 29-30, 2013)
Chartres, France : Institute of Technology.
Kidar, T., Thomas, M., El Badaoui, M. et Guilbault, R..
2013.
« Diagnosis of gear faults by cyclostationnarity ».
In Surveillance 7 : international conference : October 29-30, 2013, Chartres, France (Chartres, France, Oct. 29-30, 2013)
Chartres, France : Institute of Technology.
Kidar, Thameur, Thomas, Marc, El Badaoui, Mohamed et Guilbault, Raynald.
2013.
« Control of phases by Esprit and WLSE methods for the early detection of gear cracks ».
In CIRI 2013, 3ème Congrès International sur l’Ingénierie des Risques Industriels (Reims, France, July 3-5, 2013)
Reims, France : Université de Reims Champagne-Ardenne.
Kidar, Thameur, Thomas, Marc, Guilbault, Raynald et Mohamed, El Badaoui.
2013.
« Comparison between the efficiency of L.M.D and E.M.D algorithms for early detection of gear defects ».
Mechanics and Industry, vol. 14, nº 2.
pp. 121-127. 2012
Corriveau, Guillaume, Guilbault, Raynald, Tahan, Antoine et Sabourin, Robert.
2012.
« Review and study of genotypic diversity measures for real-coded representations ».
IEEE Transactions on Evolutionary Computation, vol. 16, nº 5.
pp. 695-710.
Guilbault, Raynald.
2012.
« Influence of thermal shear localization on elastohydrodynamic contacts ».
In Tribology and Design II (Kos, Greece, Sept. 3-5, 2012)
Coll. « WIT Transactions on Engineering Sciences », vol. 76.
pp. 3-16.
Billerica, MA : Wit Press.
Guilbault, Raynald, Lalonde, Sébastien et Thomas, Marc.
2012.
« Nonlinear damping calculation in cylindrical gear dynamic modeling ».
Journal of Sound and Vibration, vol. 331, nº 9.
pp. 2110-2128.
Kidar, Thameur, Thomas, Marc, Elbadaoui, Mohamed et Guilbault, Raynald.
2012.
« Application of Time Descriptors to the Modified Hilbert Transform of Empirical Mode Decomposition for Early Detection of Gear Defects ».
In Condition Monitoring of Machinery in Non-Stationary Operations : Proceedings of the Second International Conference "Condition Monitoring of Machinery in Non-Stationnary Operations" CMMNO’2012 (Hammamet, Tunisia, Mar. 26-28, 2012)
pp. 471-479.
Berlin, Heidelberg : Springer Berlin Heidelberg.
Kidar, Thameur, Thomas, Marc, Guilbault, Raynald et El Badaoui, Mohamed.
2012.
« Comparison between the efficiency of LMD and EMD algorithms for early detection of gear defects ».
In 3ième édition du colloque national sur l'analyse vibratoire expérimentale (AVE 2012) (Blois, France, Nov. 20-21, 2012)
Najjari, M. et Guilbault, R..
2012.
« Edge correction in the elastohydrodynamic lubrication of finite line contact ».
In International Conference on Mechanical Engineering and Mechatronics (ICMEM'12) (Ottawa, ON, Canada, Aug. 16-18, 2012)
76.71-76.78.
Ottawa, ON, Canada : Avestia Publishing. 2011
Guilbault, Raynald.
2011.
« A fast correction for elastic quarter-space applied to 3D modeling of edge contact problems ».
Journal of Tribology, vol. 133, nº 3.
Lalonde, Sébastien et Guilbault, Raynald.
2011.
« Prediction of thin-rimmed gear crack propagation from a factorial design approach ».
Fatigue & Fracture of Engineering Materials & Structures, vol. 34, nº 7.
pp. 470-486. 2010
Corriveau, Guillaume, Guilbault, Raynald et Tahan, Antoine.
2010.
« Genetic algorithms and finite element coupling for mechanical optimization ».
Advances in Engineering Software, vol. 41, nº 3.
pp. 422-426.
Guilbault, Raynald.
2010.
« A fast correction for traction-free surface of elastic quarter-space ».
In 3rd International Conference on Tribology and Design (Algarve, Portugal, May 11-13, 2010)
Coll. « WIT Transactions on Engineering Sciences »
pp. 37-48.
WITPress. 2009
Lalonde, Sébastien et Guilbault, Raynald.
2009.
« Finite separation method : an efficient boundary element crack modeling technique ».
Computational Mechanics, vol. 44, nº 6.
pp. 791-807.
Lalonde, Sébastien et Guilbault, Raynald.
2009.
« Numerical characterization of thin-rimmed gear tooth bending fatigue crack propagation ».
In 12th International Conference on Fracture 2009, ICF-12 (Ottawa, ON, Canada, July 12-17, 2009)
pp. 5827-5836.
Japan : International Congress on Fracture.
Palaisi, D., Guilbault, Raynald, Thomas, Marc, Lakis, A. A. et Mureithi, N..
2009.
« Numerical simulations of damaged gear vibrations ».
In Proceedings of the 27th Seminar on Machinery Vibration (Vancouver, BC, Canada, Oct. 28-30, 2009)
2008
Guilbault, Raynald et Thomas, Marc.
2008.
« Prediction of resonances of thin-rimmed cylindrical gears from a sub-structuring approach ».
In Canadian Society for Mechanical Engineering Forum (CSME) (Ottawa, ON, Canada, June 5-8, 2008)
CSME.
Lalonde, Sébastien et Guilbault, Raynald.
2008.
« A new and efficient approach for boundary element 2D crack modeling ».
In Canadian Society for Mechanical Engineering Forum (CSME) (Ottawa, ON, Canada, June 5-8, 2008)
2007
Corriveau, G., Guilbault, Raynald et Tahan, Antoine.
2007.
« Genetic algorithms and finite element coupling for mechanical optimization ».
In 10th International Conference on Optimum Design in Engineering (OPTI) (Myrtle Beach, USA, May 7- 9, 2007)
pp. 87-96.
Southampton, UK : WITPress.
Corriveau, G., Guilbault, Raynald et Tahan, Antoine.
2007.
« Optimisation d'une turbine hydroélectrique par algorithmes génétiques ».
In 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montréal, Canada, June 11-13, 2007)
Montréal, Qué., Canada : École de technologie supérieure.
Khalfi, B. et Guilbault, Raynald.
2007.
« Turbine hydroélectrique Francis: un nouveau modèle rapide et précis de calcul des contraintes ».
In 5th International Conference on Industrial Automation = Cinquième Conférence Internationale sur l'Automatisation Industrielle (Montréal, Canada, June 11-13, 2007)
Montréal, Qué., Canada : École de technologie supérieure. 2006
Guilbault, Raynald.
2006.
« Tooth influence on flexural and torsional flexibility, and model tooth number prediction for optimum dynamic simulation of wide-faced spur gears ».
Journal of Mechanical Design, vol. 128, nº 3.
pp. 626-633.
Guilbault, Raynald, Gosselin, Claude et Cloutier, Louis.
2006.
« Helical gears, effects of tooth deviations and tooth modifications on load sharing and fillet stresses ».
Journal of Mechanical Design, vol. 128, nº 2.
pp. 444-456.
Lalonde, Sébastien et Guilbault, Raynald.
2006.
« Dynamic analysis of spur gears by non linear modeling ».
In Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montreal, QC, Canada, Oct. 25-27, 2006)
pp. 15-35.
Calgary : ACVM. 2005Guilbault, Raynald. 2005. « Modes vibratoires des roues d'engrenage cylindriques : un outil de conception adapté ». Communication lors de la conférence : Conférence de l'Association Canadienne en Vibration des Machines (ACVM) (Montréal, QC, Canada, Oct. 2005). Guilbault, Raynald et Cloutier, L.. 2005. « Numerical investigation of the influence of rim and web thickness on vibration modes of thin-rimmed cylindrical gears ». Communication lors de la conférence : International Conference on Gears (Munich, Germany, Sept. 14-16, 2005).
Guilbault, Raynald et Cloutier, L..
2005.
« Numerical investigation of the influence of rim and web thickness on vibration modes of thin-rimmed cylindrical gears ».
In International Conference on Gears (Munich, Germany, Sept. 14-16, 2005)
pp. 651-669.
Germany : VDI Verlag GMBH.
Guilbault, Raynald, Gosselin, Claude et Cloutier, Louis .
2005.
« Express model for load sharing and stress analysis in helical gear ».
Journal of Mechanical Design, vol. 127, nº 6.
pp. 1161-1172. 2003
Guilbault, Raynald.
2003.
« Mise au point d'un laboratoire sur l'équilibrage dynamique des rotors rigides déséquilibrés pour le cours MEC729 - Mécanismes et dynamique des machines ».
In Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2002-2003 : Actes (Montréal, QC, Canada, 25 avril 2003)
pp. 49-57.
École de technologie supérieure. |