FRANÇAIS
A showcase of ÉTS researchers’ publications and other contributions
SEARCH

List of publications of "Lê, Van Ngan"

Export as [Atom feed] Atom [RSS feed] RSS 1.0 [RSS2 feed] RSS 2.0
Group by: Year | Item Type | No order
Number of items: 56.

Lê, Van Ngan, Champliaud, Henri, Marchand, Françoise, Terriault, Patrick and Arteau, Jean. 2010. « Effective learning of buckling of columns in engineering programs ». Communication lors de la conférence : XI International Conference on Engineering and Technology Education (INTERTECH) (Ilheus, Bahia, Brazil, Mar. 7-10, 2010).

Kassab, Rabih, Champliaud, Henri, Lanteigne, Jacques, Lê, Van Ngan and Thomas, Marc. 2010. « Finite element modeling of a welded T-joint ». In Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C, Canada, June 7-9, 2010)

Lê, Van Ngan and Champliaud, Henri. 2010. « Finite element simulation of forces in strips tying metal sheet coils ». In 30th IASTED Conference on Modelling, Identification, and Control (AsiaMIC) (Phuket, Thailand, November 24-26, 2010) Coll. « Proceedings of the IASTED International Conference on Modelling, Identification and Control » pp. 74-79. Calgary, Canada : Acta Press.

Lajmi, Abdelmajid, Champliaud, Henri and Lê, Van Ngan. 2010. « Pressure and temperature dependent static friction model for an elastomer cap liner based on experiments ». In Fifth International Conference on Advances in Mechanical Engineering and Mechanics (Hammamet, Tunisia, Dec. 18-20, 2010)

Hacini, Lyes, Lê, Van Ngan and Bocher, Philippe. 2008. « Effect of impact energy on residual stresses induced by hammer peening of 304L plates ». Journal of Materials Processing Technology, vol. 208, nº 1-3. pp. 542-548.
Compte des citations dans Scopus : 46.

Hacini, L., Lê, Van Ngan and Bocher, Philippe. 2009. « Evaluation of residual stresses induced by robotized hammer peening by the contour method ». Experimental Mechanics, vol. 49, nº 6. pp. 775-783.
Compte des citations dans Scopus : 40.

Lê, N. V.. 1994. « Method and mechanism of beneficial residual-stresses in tubes ». Journal of Pressure Vessel Technology, vol. 116, nº 2. pp. 175-178.
Compte des citations dans Scopus : 6.

Wang, H., Vu-Khanh, Toan and Le, Van Ngan. 1995. « Effects of large deflection on mode-ii fracture test of composite-materials ». Journal of Composite Materials, vol. 29, nº 6. pp. 833-849.
Compte des citations dans Scopus : 20.

Lê, Van Ngan, Champliaud, Henri and Amri, Brahim. 2007. « A hysteresis approach of thermal expansion effect on residual stresses due to welding ». In Proceedings of the IASTED International Conference on Modelling and Simulation (Montreal, Canada, May 30-June 1, 2007) pp. 521-526. Calgary, Canada : ACTA Press.

Martin, Francis, Lê, Van Ngan, Champliaud, Henri and Nguyen, Hoa Ngan. 2007. « Stress concentration of shrink fit assembly using finite element method ». In Proceedings of the IASTED Asian Conference on Modelling and Simulation (Beijing, China, Oct. 8-10, 2007) pp. 67-70. Calgary, Canada : ACTA Press.

Nguyen, H. N., Lê, Van Ngan, Champliaud, Henri and Martin, F.. 2008. « Waving behaviour of fatigue stress fluctuation in shrink-fit assemblies using 3D finite elements ». In 4th International Conference on High Performance Structures and Materials (HPSM) (Algarve, Portugal, May 13-15, 2008) pp. 459-469. Southampton, UK : WITPress.

Nechache, Akli, Bouzid, Hakim A. and Le, Van Ngan. 2004. « Analytical modeling of a bolted flange joint subjected to creep relaxation ». In 12th International Conference on Nuclear Engineering (ICONE) (Arlington, VA, USA, Apr. 25-29, 2004) pp. 705-712. New York, NY, USA : American Society of Mechanical Engineers.
Compte des citations dans Scopus : 1.

Lê, Van Ngan and Champliaud, Henri. 2012. « Finite element simulations for comparing three manhole designs for horizontal mills ». In Proceedings of the IASTED International Conference on Modelling and Simulation, MS 2012 (Banff, AB, Canada, July 3-5, 2012 ) pp. 192-197. Calgary, Canada : Acta Press.

Hacini, L., Lê, Van Ngan, Bocher, Philippe and Thibault, D.. 2006. « Effect of energy level on stresses induced by robotized hammer peening ». In Conference of Metallurgists (COM) (Montreal, QC, Canada, Oct.1-4, 2006) 781-790 . Montreal, Canada : The Metallurgy and Materials Society of CIM.

Bouzid, Hakim and Lê, Van Ngan. 2003. « Développement de deux séances de laboratoire pour les cours MEC728 et SYS865 ». In Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2001-2002 : Actes (Montréal, QC, Canada, 11 juin 2002) pp. 7-12.

Duchaine, F., Champliaud, Henri, Morin, O. and Lê, Van Ngan. 2003. « Maillage par krigeage de volume par reconnaissance des contours des sections dans un environnement CAD ». Communication lors de la conférence : 71e Congrès de l'ACFAS (Rimouski, QC, Canada, 19-23 mai 2003).

Lajmi, A., Champliaud, Henri and Lê, Van Ngan. 2003. « Effet du fluage sur le comportement du joint d'étanchéité dans les fermetures filetées ». Communication lors de la conférence : 71e Congrès de l'ACFAS (Rimouski, QC, Canada, 19-23 mai 2003).

Lê, Van Ngan, Ngô, Anh Dung, Hô, N.S. and Huynh, N.. 1996. « 3-D knee orthosis: part 2 - Experimental and finite element analysis of coupled knee-orthosis stiffness ». Communication lors de la conférence : 1996 Annual Scientific Meeting of the Canadian Academy of Sport Medecine (Montreal, QC, Canada, Feb. 14-17, 1996).

Lê, Van Ngan, Ngô, Anh Dung, Allardin, T. and Mailhot, J.. 1994. « Integrated and safe design of telescopic cylinders without follower guides ». Communication lors de la conférence : Canadian Standards Association, Hydraulic Elevators Meeting (Montreal, QC, Canada, May 26, 1994).

Hacini, L., Lê, Van Ngan, Bocher, Philippe and Thibault, D.. 2006. « Residual stresses induced by robotized hammer peening : the effect of impact energy level ». In Aerospace materials and manufacturing : emerging materials, processes, and repair techniques : proceedings of the third International [Symposium] on Aerospace Materials and Manufacturing : emerging materials, processes and repair techniques, October 1-4, (Montreal, QC, Canada, Oct. 2-4, 2006) pp. 759-768. Montreal : Canadian Institute of Mining, Metallurgy and Petroleum.

Feng, Zhengkun, Champliaud, Henri, Lê, Van Ngan and Dao, Thien-My. 2009. « Analysis of roll bending processes based on finite element simulation ». In Proceedings of the NAFEMS World Congress (Crete, Greece, June 16-19, 2009)

Lê, Van Ngan, Champliaud, Henri, Martin, F. and Amri, B. 2009. « Rotating bending stresses in shrink-fit assemblies using FEM ». In Proceedings of the NAFEMS World Congress (Crete, Greece, June 16-19, 2009)

Kassab, Rabih, Champliaud, Henri, Bocher, Philippe, Lanteigne, Jacques and Lê, Van Ngan. 2013. « Strain variations of AISI 4340 steel undergoing metallurgical transformations during induction hardening heat treatment ». In Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013) pp. 774-783. Warrendale, PA, USA : Association for Iron and Steel Technology.

Lê, Van Ngan and Champliaud, Henri. 2013. « Safety factor of beam-column structures based on finite element linear buckling analysis ». In Congrès français de mécanique 2013 : du 26 au 30 août 2013 Bordeaux (Bordeaux, France, Aug. 26-30, 2013) Association Française de Mécanique.

Feng, Zhengkun, Champliaud, Henri, Mathieu, Louis, Sabourin, Michel and Lê, Van Ngan. 2013. « Investigation of pressing process for large and thick blades of Francis turbines ». In Congrès français de mécanique 2013 : du 26 au 30 août 2013 Bordeaux (Bordeaux, France, Aug. 26-30, 2013) Association Française de Mécanique.

Lê, Van Ngan and Champliaud, Henri. 2012. « A teaching approach for enhancing structural design aspects in basic engineering courses ». In Proceedings of the 5th World Universities Forum : Reinventing the university in a time of crisis (Rhodes Island, Greece, Jan. 8-10, 2012) Rhodes Island, Greece : Common Ground Publishing.

Lê, Van Ngan and Champliaud, Henri. 2011. « Finite element analysis of spring back strain energy of metal sheet coils ». In A world of engineering simulation industrial needs, best practice, visions for the future ; NWC 2011, NAFEMS World Congress, 23-26 May, Boston, USA (Boston, MA, USA, May 23-26, 2011)

Champliaud, H. and Lê, Van Ngan. 2012. « Beginning learning principles of finite element method with heat conduction ». In Proceedings of the 5th World Universities Forum : Reinventing the university in a time of crisis (Rhodes Island, Greece, Jan. 8-10, 2012) Rhodes Island, Greece : Common Ground Publishing.

Kassab, Rabih Kamal, Champliaud, Henri, Lê, Van Ngan, Lanteigne, Jacques and Thomas, Marc. 2012. « Experimental and finite element analysis of a t-joint welding ». Journal of Mechanics Engineering and Automation, vol. 2, nº 7. pp. 411-421.

Lê, Van Ngan and Champliaud, Henri. 2014. « Safety factor of welded-plate beams based on finite element linear buckling analysis ». In Proceedings of the IASTED International Conference on Modelling, Simulation and Identification, MSI 2014 (Banff, AB, Canada, July 16-18, 2014) pp. 51-57. Acta Press.

Lajmi, Abdelmajid, Champliaud, Henri and Lê, Van Ngan. 2011. « Computation of the maximum torque of a cap liner using a power-law friction and finite element analysis ». Packaging Technology and Science, vol. 24, nº 2. pp. 103-121.
Compte des citations dans Scopus : 7.

Champliaud, Henri and Le, N. V.. 2003. « Prediction of the leakage pressure of a cap and bottle assembly using the finite element method ». Glass Technology, vol. 44, nº 6. pp. 225-230.
Compte des citations dans Scopus : 1.

Ahmid, Ali, Dao, Thien-My and Le, Ngan Van. 2021. « Enhanced hyper-cube framework ant colony optimization for combinatorial optimization problems ». Algorithms, vol. 14, nº 10.

Ahmid, Ali, Le, Van N. and Dao, Thien M.. 2017. « An optimization procedure for overhead gantry crane exposed to buckling and yield criteria ». International Journal of Technology and Engineering, vol. 8, nº 2. p. 11.

Ahmid, Ali, Le, Van Ngan and Dao, Thien My. 2017. « Optimization procedure for an I-beam crane subjected to yield and buckling criteria ». In 2017 World Congress on Advances in Structural Engineering and Mechanics (ASEM17) : proceedings (Seoul, Korea, 28 Aug. - 01 Sept., 2017) IASSEM Conferences.

Brodeur, Samuel, Le, Van Ngan and Champliaud, Henri. 2021. « A nonlinear finite-element analysis tool to prevent rupture of power transformer tank ». Sustainability, vol. 13, nº 3.
Compte des citations dans Scopus : 7.

Champliaud, Henri, Duchaine, François and Lê, Van Ngan. 2003. « Controlling normal direction and thickness of interpolated surfaces of complex thin parts ». In 4th International Conference on Industrial Automation (Montreal, QC, Canada, June 9-11, 2003)

Champliaud, Henri, Lajmi, Abdelmajid and Lê, Ngan Van. 2005. « Finite element analysis of a three-point belt tension tester ». In Non-Conference Specific Technical Papers (Troy, MI, USA, Sept. 1, 2005) Coll. « SAE Technical Papers », vol. 2005-01-3137. SAE.

Champliaud, Henri, Lajmi, Abdelmajid and Lê, Ngan Van. 2005. « Finite element analysis of a three-point belt tension tester ». SAE Transactions : Journal of Engines, vol. 114, nº 3. pp. 1533-1538.

Champliaud, Henri, Lajmi, Abdelmajid and Lê, Van Ngan. 2003. « Numerical approach of twist-off torque prediction for cap bottle closure ». In 4th International Conference on Industrial Automation (Montreal, QC, Canada, June 9-11, 2003)

Champliaud, Henri, Vieillot, Valentin, Provencher, David and Lê, Ngan Van. 2018. « Rapid 3D shape forming computation with piecewise heating lines using a fifth order spline formulation ». In 30th European Modeling and Simulation Symposium (EMSS 2018) (Budapest , Hungary, Sept. 17-19, 2018) pp. 204-209. Dime University of Genoa.

Hacini, L., Lê, Van Ngan and Bocher, Philippe. 2007. « Traitement de surfaces par impacts : évaluation des contraintes résiduelles induites par martelage ». In 18e Congrès Français de Mécanique (Grenoble, France, 27-31 août 2007) Courbevoie, France : AFM, Maison de la Mécanique.

Le, N. V.. 1985. « Non-linear response of U-tubes to a differential axial movment between two legs ». In Proceedings of the 1985 Pressure Vessels and Piping Conference. Piping, Feedwater Heater Operation, and Pumps (New Orleans, LA, USA, June 23-26, 1985) Coll. « American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP », vol. 98-9. pp. 219-225. New York, NY, USA : ASME.

Lê, N. V.. 1987. « Nonlinear response of U-tubes to a differential axial movement between two legs ». Journal of Pressure Vessel Technology, vol. 109, nº 2. pp. 205-211.

Le, N. V.. 1982. « Required thickness of class 1 U-tube bolted tubesheet ». In Pressure vessel design : presented at Pressure Vessel and Piping Conference and Exhibition (Orlando, FL, USA, June 27-July 2, 1982) Coll. « American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP », vol. 57. American Society of Mechanical Engineers.

Lé, N. V.. 1984. « Thermal stresses in U-tubes versus bend radius and baffle spacings ». Journal of Pressure Vessel Technology, vol. 106, nº 4. pp. 412-414.
Compte des citations dans Scopus : 1.

Lê, N. V. and Luong, C. T.. 1987. « Comparison of thermal stresses in 180 degree bend and two 90 degree bend U-tubes ». In Design and analysis of composite material Vessels : presented at the 1987 Pressure Vessels and Piping Conference, San Diego (San Diego, CA, USA, June 28-July 02, 1987) Coll. « American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP », vol. 120. pp. 87-91. New York, NY, USA : ASME.

Le, Ngan V.. 1984. « Nuclear steam generator tube failures: analysis and recommendations ». In Winter Annual Meeting of the American Society of Mechanical Engineers (New Orleans, LA, USA, Dec. 09-14, 1984) New York, NY, USA : ASME.
Compte des citations dans Scopus : 1.

Lê, Van Ngan, Champliaud, Henri, Marchand, Françoise, Terriault, Patrick and Arteau, Jean. 2010. « Effective learning of buckling of columns in engineering programs ». In Proceedings of international conference on engineering and technology education (Ilheus, Bahia, Brazil, Mar. 7-10, 2010) pp. 143-147.

Lê, Van Ngan and Foisy, R.. 2005. « Finite element assisted fatigue analysis of welded steel construction according to AISC code ». In Fatigue Design Conference (Senlis, France, Nov. 16-18, 2005) Senlis, France : Centre technique des industries mécaniques (CETIM).

Lê, Van Ngan and Nguyen, Hoa Ngan. 2007. « Using 2-D axisymmetric finite elements for fatigue analysis of shrink-fit hub and shaft assemblies ». In Proceedings of the 8th National Conference on Mechanics (Hanoi, Viêt Nam, Dec. 6-9, 2007)

Nguyen, H.N., Lê, Van Ngan, Champliaud, Henri and Martin, Francis. 2007. « Stress concentration factor in shrink-fit shaft based on 3-D finite elements ». In Proceedings of the 8th National Conference on Mechanics (Hanoi, Viêt Nam, Dec. 6-9, 2007)

Nguyen, Hoan Huy, Champliaud, Henri and Lê, Van Ngan. 2018. « Dynamic finite element modeling of metal spinning process with a stationary mandrel and a rotating tool ». In 30th European Modeling and Simulation Symposium (EMSS 2018) (Budapest , Hungary, Sept. 17-19, 2018) pp. 91-96. Dime University of Genoa.
Compte des citations dans Scopus : 2.

Nguyen, Huy Hoan, Champliaud, Henri and Lê, Van Ngan. 2020. « Circumferential cracking in conventional metal spinning process ». In 32nd European Modeling and Simulation Symposium (EMSS) (En ligne, Sept. 16-18, 2020) pp. 165-170. Dime University of Genoa.
Compte des citations dans Scopus : 1.

Nguyen, Huy Hoan, Champliaud, Henri and Le, Van Ngan. 2024. « Effect of intermediate path on post-wrinkle initiation of the multi-pass metal spinning process: Analysis in the rotating reference frame ». Journal of Manufacturing and Materials Processing, vol. 8, nº 1.

Vu-Khanh, Toan and Lê, V. N.. 1994. « Impact damage in peek/carbon fiber laminated composite ». In Symposium of MRS-1994 Fall Meeting (Boston, MA, USA, Nov. 27-Dec. 2, 1994) p. 587. Materials Research Society.

This list was generated on Wed Jul 17 13:19:45 2024 EDT.