Liste des publications de "Tabiai, Ilyass"

Article publié dans une revue, révisé par les pairs

Catar, Louis, Tabiai, Ilyass et St-Onge, David. 2025. « Tensile tests of different families of ultra-lightweight photosensitive polymer microlattices ». Journal of Engineering Materials and Technology, vol. 147, nº 4.

Gnonhoue, George, David, Éric, Voix, Jérémie et Tabiai, Ilyass. 2025. « Hybrid flexible dry electrodes for electroencephalography: Electrical and thermo-mechanical properties ». Journal of Applied Polymer Science.
(Sous presse)

Gnonhoue, George, Tabiai, Ilyass, Voix, Jérémie et David, Éric. 2025. « Flexible dry electrodes based on styrene-ethylene-butylene-styrene/carbon black and ethylene-vinyl acetate/carbon black for electroencephalography: Electrical, thermal and mechanical properties ». Journal of Applied Polymer Science.
(Sous presse)

Gunther, Jason, Girard, Mélanie, Dubé, Martine et Tabiai, Ilyass. 2025. « A study on the influence of polypropylene melt flow index on nonwoven fibers produced through hot melt centrifugal spinning ». Journal of Manufacturing Science and Engineering, vol. 147, nº 4.

Gunther, Jason, Lengaigne, Jacques, Girard, Mélanie, Toupin-Guay, Valérie, Teasdale, James T., Dubé, Martine et Tabiai, Ilyass. 2023. « A versatile hot melt centrifugal spinning apparatus for thermoplastic microfibres production ». HardwareX, vol. 15.
Compte des citations dans Scopus : 1.

Jean-Fulcrand, Annelise, Léger, Ewen, Dau, Frederic, Dube, Martine et Tabiai, Ilyass. 2025. « Degradation mechanisms of CF/PPS, CF/PEI, and CF/PEEK under combined UV radiation and condensation ». Composites Part A: Applied Science and Manufacturing, vol. 198.

Moazen, S., Gosselin, F. P., Tabiai, I. et Dubé, M.. 2025. « 3D printing LDPE/lunar regolith simulant composite: Manufacturing with in-situ resources on the moon ». Acta Astronautica, vol. 237. pp. 409-420.

Richard Soucy, Ruan-Isabelle, Smith, Adam W., Dupuis, Kevin, Tabiai, Ilyass et Dubé, Martine. 2025. « Large scale fused-granular-fabrication using recycled carbon fibre/PEKK-PEEK pellets derived from aerospace prepreg waste ». Composites Communications, vol. 60.

Shokrollahi, Maryam, Smith, Adam W., Levy, Arthur, Dubé, Martine et Tabiai, Ilyass. 2025. « Reassessing anisotropy in 3D printed structures: The role of extrudate geometry vs interface bonding ». Journal of Manufacturing Processes, vol. 149. pp. 456-472.

Smith, A. W., Pattery, H., Canart, J. P., Tabiai, I. et Dubé, M.. 2025. « Upcycling of unidirectional carbon-fibre/PEEK prepreg trim waste ». Composites Part A: Applied Science and Manufacturing, vol. 198.
Compte des citations dans Scopus : 1.

Compte rendu de conférence

Catar, Louis et Tabiai, Ilyass. 2022. « Towards the characterisation of polymer micro-lattices additive manufacturing techniques for versatile aerospace structure design ». In 1st International Conference on Advanced Manufacturing for Aerospace and Space Applications (ICAM22) (En ligne, May 07-11, 2022)

Catar, Louis, Tabiai, Ilyass et St-Onge, David. 2022. « Additive manufacturing strategy for ultra-lightweight high value-added components ». In ASME 2022 International Design Engineering Technical Conferences Computers and Information in Engineering Conference (St-Louis, MO, USA, Aug. 14-17, 2022) ASME.
Compte des citations dans Scopus : 1.

Catar, Louis, Zagal Rojas, Sebastián, Wadoux, Pierre, Tabiai, Ilyass et St-Onge, David. 2025. « A mechanical add-on for multi-resin SLA printing: Design, integration, and testing ». In Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC/CIE (Anaheim, CA, USA, Aug. 17-20, 2025) American Society of Mechanical Engineers.

Chong, M., Pattery, H., Canart, J. P., Smith, A., Tabiai, I., Dubé, M. et Kravchenko, S. G.. 2024. « Tensile strength uncertainty quantification in a prepreg platelet compression molded composite considering the statistical distribution of platelets shape and size ». In International SAMPE Technical Conference (Long Beach, CA, USA, May 20-23, 2024) Society for the Advancement of Material and Process Engineering.

Pattery, H., Smith, A., Pik, A., Canart, J. P., Tabiai, I. et Dubé, M.. 2024. « Characterisation of defects in strand-based thermoplastic composite parts using ultrasonic inspection ». In International SAMPE Technical Conference (Long Beach, CA, USA, May 20-23, 2024) Society for the Advancement of Material and Process Engineering.
Compte des citations dans Scopus : 1.

Richard Soucy, Ruan-Isabelle, Smith, Adam W., Dupuis, Kevin, Tabiai, Ilyass et Dubé, Martine. 2024. « Fused-granular-fabrication using sustainable carbon fibre/PEKK-PEEK pellets: Process parameter identification ». In Composites and Advanced Materials Expo (CAMX) (San Diego, CA, USA, Sept. 09-12, 2024) pp. 73-88. SAMPE.

Soucy, Ruan-Isabelle Richard, Smith, Adam W., Dupuis, Kevin, Tabiai, Ilyass et Dubé, Martine. 2024. « Fused-granular-fabrication using sustainable carbon fibre/PEKK-PEEK pellets: Process parameter identification ». In CAMX 2024 - Composites and Advanced Materials Expo (San Diego, CA, USA, Sept. 09, 2024) Sampe North America.

Communication

Catar, Louis, Rojas, Sebastian Zagal, Wadoux, Pierre, Tabiai, Ilyass et St-Onge, David. 2025. « A mechanical add-on for multi-resin SLA printing: Design, integration, and testing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Catar, Louis, Tabiai, Ilyass et St-Onge, David. 2023. « Means of testing and characterization of absorbing 3D printed structures to withstand impacts on lightweight RPAS ». Communication lors de la conférence : CASI AERO (Ottawa, ON, Canada, 14-16 nov. 2023).

Dumitru, Dorian Stefan, Tabiai, Ilyass et Melancon, David. 2025. « Deployable composite panel for the electromagnetic deorbitation of satellites ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Kheirani, Afsaneh, Tabiai, Ilyass et St-Onge, David. 2025. « From strength to leakage: Extensive mechanical testing of a novel ultra-light membrane small indoor airship ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mtar, Aymen, Tabiai, Ilyass et Boton, Conrad. 2025. « 4D printing of photoreactive shape memory polymer for smart building applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Shokrollahi, Maryam, Vassal, Orlane, Dubé, Martine et Tabiai, Ilyass. 2025. « Impact of nozzle length and extrusion speed on tensile properties of FFF-printed filaments ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Smith, A. W., Pattery, H., Canart, J. P., Tabiai, I. et Dubé, M.. 2023. « Mechanical sieving of carbon-fibre/PEEK prepreg trim waste and its influence on compression moulded panel properties ». Communication lors de la conférence : ICCM International Conferences on Composite Materials (Belfast, Ireland, July 30-Aug. 04, 2023).

Zagal Rojas, Sebastián, Catar, Louis, Tabiai, Ilyass et St-Onge, David. 2024. « Novel multi-resin printer for space structures ». Communication lors de la conférence : CASI ASTRO (Toronto, ON, Canada, Aug. 27-29, 2024).