Macrosegregation characteristics of ferrite and austenite stabilizer elements in large size high strength steel ingot

Loucif, Abdelhalim, Zhang, Chunping, Jahazi, Mohammad et Lapierre-Boire, Louis-Philippe. 2020. « Macrosegregation characteristics of ferrite and austenite stabilizer elements in large size high strength steel ingot ». In 8th International Conference on Engineering and Innovative Materials (ICEIM 2019) (Tokyo, Japan, Sept. 06-08, 2019) Coll. « Key Engineering Materials », vol. 846. pp. 82-86. Trans Tech Publications Ltd.
Compte des citations dans Scopus : 1.

PDF Jahazi-M-2020-21264.pdf - Version acceptée Accès restreint à : Administrateur seulement Licence d'utilisation : Tous les droits réservés aux détenteurs du droit d'auteur. Télécharger (437kB) | Demande de copie

Résumé

In the present work, the segregation degrees of ferrite and austenite stabilizer alloying elements were analyzed for a high strength steel. For this, samples were taken from the surface and center of the hot-top and the upper section of a 40 MT ingot. The results showed that the positive segregation ratios for all the investigated elements were higher in the ingot center than in the surface with higher values for austenite stabilizer elements. The increase of austenite alloying element stabilizers was accompanied by the change in the primary solidification mode of the austenite phase. The obtained results are in good agreement with the observed presence of austenite, revealed by X-ray diffraction analysis, stabilized by the austenite alloying elements.

Type de document:	Compte rendu de conférence
ISBN:	10139826
Professeur:	Professeur Jahazi, Mohammad
Affiliation:	Génie mécanique
Date de dépôt:	23 oct. 2020 18:05
Dernière modification:	13 avr. 2023 16:08
URI:	https://espace2.etsmtl.ca/id/eprint/21264

Actions (Authentification requise)

Dernière vérification avant le dépôt