Contreras Montoya, Leidy Tatiana, Ilinca, Adrian et Lain, Santiago.
2023.
« Influence of surface roughness modeling on the aerodynamics of an iced wind turbine S809 airfoil ».
Processes, vol. 11, nº 12.
Compte des citations dans Scopus : 1.
Prévisualisation |
PDF
Ilinca-A-2023-28271.pdf - Version publiée Licence d'utilisation : Creative Commons CC BY. Télécharger (17MB) | Prévisualisation |
Résumé
Ice formation on structures like wind turbine blade airfoils significantly reduces their aerodynamic efficiency. The presence of ice on airfoils causes deformation in their geometry and an increase in their surface roughness, enhancing turbulence, particularly on the suction side of the airfoil at high angles of attack. An approach for understanding this phenomenon and assessing its impact on wind turbine operation is modeling and simulation. In this contribution, a computational fluid dynamics (CFD) study is conducted using FENSAP-ICE 2022 R1 software available in the ANSYS package. The objective was to evaluate the influence of surface roughness modeling (Shin et al. and beading models) in combination with different turbulence models (Spalart–Allmaras and k-! shear stress transport) on the estimation of the aerodynamic performance losses of wind turbine airfoils not only under rime ice conditions but also considering the less studied case of glaze ice. Moreover, the behavior of the commonly less explored pressure and skin friction coefficients is examined in the clean and iced airfoil scenarios. As a result, the iced profile experiences higher drag and lower lift than in the no-ice conditions, which is explained by modifying skin friction and pressure coefficients by ice. Overall, the outcomes of both turbulence models are similar, showing maximum differences not higher than 10% in the simulations for both ice regimes. However, it is demonstrated that the influence of blade roughness was critical and cannot be disregarded in ice accretion simulations on wind turbine blades. In this context, the beading model has demonstrated an excellent ability to manage changes in roughness throughout the ice accretion process. On the other hand, the widely used roughness model of Shin et al. could underestimate the lift and overestimate the drag coefficients of the wind turbine airfoil in icy conditions.
| Type de document: | Article publié dans une revue, révisé par les pairs |
|---|---|
| Professeur: | Professeur Ilinca, Adrian |
| Affiliation: | Génie mécanique |
| Date de dépôt: | 12 janv. 2024 14:50 |
| Dernière modification: | 06 févr. 2024 19:38 |
| URI: | https://espace2.etsmtl.ca/id/eprint/28271 |
Actions (Authentification requise)
 |
Dernière vérification avant le dépôt |