Clancy, Kaitlyn, Xie, Siwen, Smith, Griffin et Onaizah, Onaizah.
2025.
« Automated fabrication of magnetic soft microrobots ».
In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025)
Coll. « Progress in Canadian Mechanical Engineering », vol. 8.
Prévisualisation |
PDF
378 - Automated fabrication of magnetic .pdf - Version publiée Licence d'utilisation : Tous les droits réservés aux détenteurs du droit d'auteur. Télécharger (1MB) | Prévisualisation |
Résumé
The advent of 3D printing has revolutionized many industries and has had similar improvements for soft robots. However, many challenges persist for these functional devices. Magnetic soft robots require the addition of magnetic particles that must be correctly oriented. There is a significant gap in the automated fabrication of 3D geometric structures with 3D magnetization direction. A fully automated 3D printer was designed to improve accuracy, speed, and reproducibility. This design was able to achieve a circular spot size (voxels) of 1.6mm in diameter. An updated optical system can improve the resolution to a square spot size of 0.05mm. The new system achieves more complex designs as shown through magneto-mechanical simulations. Various microrobots including 'worm', 'gripper' and 'zipper' designs are evaluated with the new spot size.
| Type de document: | Compte rendu de conférence |
|---|---|
| Éditeurs: | Éditeurs ORCID Hof, Lucas A. NON SPÉCIFIÉ Di Labbio, Giuseppe NON SPÉCIFIÉ Tahan, Antoine NON SPÉCIFIÉ Sanjosé, Marlène NON SPÉCIFIÉ Lalonde, Sébastien NON SPÉCIFIÉ Demarquette, Nicole R. NON SPÉCIFIÉ |
| Date de dépôt: | 18 déc. 2025 15:09 |
| Dernière modification: | 18 déc. 2025 15:09 |
| URI: | https://espace2.etsmtl.ca/id/eprint/32376 |
Actions (Authentification requise)
 |
Dernière vérification avant le dépôt |