ENGLISH
La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS
RECHERCHER

Influence of the strain rate and deformation temperature on the deformability of Ti-Ni SMAs: a preliminary study

Kreitcberg, A., Prokoshkin, S., Brailovski, Vladimir, Gunderov, D. et Khomutov, M.. 2014. « Influence of the strain rate and deformation temperature on the deformability of Ti-Ni SMAs: a preliminary study ». In 6th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD6) (Metz, France, June 30 - July 4, 2014) Coll. « IOP Conference Series: Materials Science and Engineering », vol. 63. IOP Publishing.
Compte des citations dans Scopus : 1.

[thumbnail of Influence of the strain rate and deformation temperature on the deformability of Ti-Ni SMAs A preliminary study.pdf]
Prévisualisation
PDF
Influence of the strain rate and deformation temperature on the deformability of Ti-Ni SMAs A preliminary study.pdf

Télécharger (1MB) | Prévisualisation

Résumé

The strain-rate sensitivity of coarse-grained Ti-50.0at.%Ni alloy was studied in the 20 to 500°C temperature range and 10-3 to 10-5 s-1 strain-rate range using the stain-rate jump test. The strain rate sensitivity at a strain rate as low as 10-6 s-1 was determined using the creep test. A maximum strain-rate-sensitivity exponent m of 0.5 was measured at 500°C in the [10-5 10-6]s-1 strain-rate range.

Type de document: Compte rendu de conférence
ISBN: 1757-8981
Professeur:
Professeur
Kreitcberg, Alena
Brailovski, Vladimir
Affiliation: Autres, Génie mécanique
Date de dépôt: 12 sept. 2014 18:54
Dernière modification: 08 juill. 2023 23:33
URI: https://espace2.etsmtl.ca/id/eprint/8466

Actions (Authentification requise)

Dernière vérification avant le dépôt Dernière vérification avant le dépôt