| A showcase of ÉTS researchers’ publications and other contributions |
| FRANÇAIS |
List of publications of "Ahmadi, Ali"Number of items: 89. 2024
Bayansal, F., Yuksel, M. T., MacDougall, S. and Ahmadi, A..
2024.
« Fabrication and characterization of chemiresistive CuO sensors sensitized by Ca-doping for detection of sweat electrolyte concentration ».
Ceramics International, vol. 50, nº 7 part A.
pp. 10131-10136.
Madadian, Elias, Naseri, Emad, Legault, Ryan and Ahmadi, Ali.
2024.
« Development of 3D-Printable Albumin-Alginate Foam for Wound Dressing Applications ».
3D Printing and Additive Manufacturing, vol. 11, nº 3.
Madadian, Elias, Ravanbakhsh, Hossein, Touani Kameni, Francesco, Rahimnejad, Maedeh, Lerouge, Sophie and Ahmadi, Ali.
2024.
« In-foam bioprinting: An embedded bioprinting technique with self-removable support bath ».
Small Science, vol. 4, nº 5.
Sadeghianmaryan, Ali, Ahmadian, Nivad, Wheatley, Sydney, Alizadeh Sardroud, Hamed, Nasrollah, Seyyed Ahmad Seyyed, Naseri, Emad and Ahmadi, Ali.
2024.
« Advancements in 3D-printable polysaccharides, proteins, and synthetic polymers for wound dressing and skin scaffolding – A review ».
International Journal of Biological Macromolecules, vol. 266, nº Part 1.
2023
Badr, Sara, Madadian, Elias, MacDonald, Debra S., Tasker, R. Andrew and Ahmadi, Ali.
2023.
« A mist-based crosslinking technique for coaxial bioprinting of hollow hydrogel fibers ».
Bioprinting, vol. 35.
Cella, Monica Angela, Coulson, Thomas, MacEachern, Samantha, Badr, Sara, Ahmadi, Ali, Tabatabaei, Mahdis Sadat, Labbe, Alain and Griffiths, Mansel William.
2023.
« Probiotic disruption of quorum sensing reduces virulence and increases cefoxitin sensitivity in methicillin-resistant Staphylococcus aureus ».
Scientific Reports, vol. 13, nº 1.
Gorji, Mohsen, Zarbaf, Dara, Mazinani, Saeedeh, Noushabadi, Abolfazl Sajadi, Cella, Monica A., Sadeghianmaryan, Ali and Ahmadi, Ali.
2023.
« Multi-responsive on-demand drug delivery PMMA-co-PDEAEMA platform based on CO2, electric potential, and pH switchable nanofibrous membranes ».
Journal of Biomaterials Science-Polymer Edition, vol. 32, nº 3.
pp. 351-371.
Legault, Ryan and Ahmadi, Ali.
2023.
« Investigation of carboxymethyl chitosan in the development of biodegradable soft bait fishing lures ».
Frontiers in Marine Science, vol. 10.
Legault, Ryan, Naseri, Emad, Madadian, Elias and Ahmadi, Ali.
2023.
« Development of a biodegradable soft bait fishing lure ».
Fisheries Research, vol. 264.
Madadian, E., Badr, S., MacDonald, D. S., Tasker, R. A. and Ahmadi, A..
2023.
« Development of foam-based support material for coaxial bioprinting of ionically crosslinking bioinks ».
Bioprinting, vol. 32.
Madadian, E., Ravanbakhsh, H., Touani Kameni, F., Rahimnejad, M., Lerouge, S. and Ahmadi, A.. 2023. « Development of an in-foam embedded bioprinting method for low-viscosity slow-crosslinking hydrogels ». Communication lors de la conférence : 38th Canadian Biomaterials Society Annual Meeting (Halifax, NS, Canada, June 14-17, 2023). 2022
Badr, S., MacCallum, B., Madadian, E., Kerr, G., Naseri, E., MacDonald, D., Bodaghkhani, A., Tasker, R. A. and Ahmadi, A..
2022.
« Development of a mist-based printhead for droplet-based bioprinting of ionically crosslinking hydrogel bioinks ».
Bioprinting, vol. 27.
Feng, Shanghuan, Kang, Kang, Salaudeen, Shakirudeen, Ahmadi, Ali, He, Quan Sophia and Hu, Yulin.
2022.
« Recent advances in algae-derived biofuels and bioactive compounds ».
Industrial and Engineering Chemistry Research, vol. 61, nº 3.
pp. 1232-1249.
Macdougall, Samantha, Bayansal, Fatih and Ahmadi, Ali.
2022.
« Emerging methods of monitoring volatile organic compounds for detection of plant pests and disease ».
Biosensors, vol. 12, nº 4.
Naseri, Emad and Ahmadi, Ali.
2022.
« A review on wound dressings: Antimicrobial agents, biomaterials, fabrication techniques, and stimuli-responsive drug release ».
European Polymer Journal, vol. 173.
Naseri, Emad, Van Beek, Anthony and Ahmadi, Ali.
2022.
« Application of electrowetting on dielectric (EWOD) in drug release control and release-on-demand ».
Colloids and Surfaces A: Physicochemical and Engineering Aspects, vol. 654.
Pope, Emily, Cartmell, Christopher, Haltli, Bradley, Ahmadi, Ali and Kerr, Russell G..
2022.
« Microencapsulation and in situ incubation methodology for the cultivation of marine bacteria ».
Frontiers in Microbiology, vol. 13.
Pope, Emily, Haltli, Bradley, Kerr, Russell G. and Ahmadi, Ali.
2022.
« Effects of matrix composition and temperature on viability and metabolic activity of microencapsulated marine bacteria ».
Microorganisms, vol. 10, nº 5.
Sadeghianmaryan, Ali, Naghieh, Saman, Salimi, Ali, Kabiri, Kourosh, Cella, Monica A. and Ahmadi, Ali.
2022.
« Fabrication of cellulosic nonwoven-based wound dressings coated with CTAB-loaded double network PAMPS/PNaA hydrogels ».
Journal of Natural Fibers, vol. 19, nº 16.
pp. 12718-12735.
Wheatley, Sydney K., Cartmell, Christopher, Madadian, Elias, Badr, Sara, Haltli, Bradley A., Kerr, Russell G. and Ahmadi, Ali.
2022.
« Microfabrication of a micron-scale microbial-domestication pod for in situ cultivation of marine bacteria ».
RSC Advances, vol. 12, nº 43.
pp. 28123-28127. 2021
Alkayyali, Tartela, Pope, Emily, Wheatley, Sydney K., Cartmell, Christopher, Haltli, Bradley, Kerr, Russell G. and Ahmadi, Ali.
2021.
« Development of a microbe domestication pod (MD Pod) for in situ cultivation of micro-encapsulated marine bacteria ».
Biotechnology and Bioengineering, vol. 118, nº 3.
pp. 1166-1176.
Butler, Haley M., Naseri, Emad, MacDonald, Debra S., Tasker, R. Andrew and Ahmadi, Ali.
2021.
« Investigation of rheology, printability, and biocompatibility of N,O-carboxymethyl chitosan and agarose bioinks for 3D bioprinting of neuron cells ».
Materialia, vol. 18.
Mazyan, Walid I., O’connor, Ellen, Martin, Elia, Vogt, Anja, Charter, Edward and Ahmadi, Ali.
2021.
« Effects of temperature and extraction time on avocado flesh (Persea americana) total phenolic yields using subcritical water extraction ».
Processes, vol. 9, nº 1.
Naseri, Emad, Cartmell, Christopher, Saab, Matthew, Kerr, Russell G. and Ahmadi, Ali.
2021.
« Development of N,O-Carboxymethyl Chitosan-starch biomaterial inks for 3D printed wound dressing applications ».
Macromolecular Bioscience, vol. 21, nº 12.
Nikdel, Mozhgan, Rajabinejad, Hossein, Yaghoubi, Hashem, Mikaeiliagah, Elmira, Cella, Monica A., Sadeghianmaryan, Ali and Ahmadi, Ali.
2021.
« Fabrication of cellulosic nonwoven material coated with polyvinyl alcohol and zinc oxide/mesoporous silica nanoparticles for wound dressing purposes with cephalexin delivery ».
ECS Journal of Solid State Science and Technology, vol. 10, nº 5.
2020
Alkayyali, Tartela and Ahmadi, Ali.
2020.
« Fabrication of microfluidic chips using controlled dissolution of 3D printed scaffolds ».
Journal of Applied Polymer Science, vol. 137, nº 46.
Butler, Haley M., Naseri, Emad, MacDonald, Debra S., Tasker, R. Andrew and Ahmadi, Ali.
2020.
« Optimization of starch- and chitosan-based bio-inks for 3D bioprinting of scaffolds for neural cell growth ».
Materialia, vol. 12.
Cameron, Tiffany, Naseri, Emad, MacCallum, Ben and Ahmadi, Ali.
2020.
« Development of a disposable single-nozzle printhead for 3D bioprinting of continuous multi-material constructs ».
Micromachines, vol. 11, nº 5.
Enright, B., Cheng, E., Yu, H., Cheung, K. C. and Ahmadi, A..
2020.
« Inkjet system design optimization for reliable cell printing ».
In 21st International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Savannah, GA, USA, Oct. 22-26, 2017)
pp. 1149-1150.
Chemical and Biological Microsystems Society.
MacCallum, B., Naseri, E., Butler, H., MacNevin, W., Tasker, R. A. and Ahmadi, A..
2020.
« Development of a 3D bioprinting system using a Co-Flow of calcium chloride mist ».
Bioprinting, vol. 20.
MacCallum, Ben, Badr, Sara, Naseri, Emad, Bodaghkhani, Armin and Ahmadi, Ali.
2020.
« Development of a mist-based hydrogel crosslinking printhead for droplet-based bioprinting ».
In MicroTAS 2020 - 24th International Conference on Miniaturized Systems for Chemistry and Life Sciences (En ligne, Oct. 04-09, 2020)
pp. 384-385.
Chemical and Biological Microsystems Society.
Mazyan, W. I., Ahmadi, A., Ahmed, H. and Hoorfar, M..
2020.
« Increasing the COP of a refrigeration cycle in natural gas liquefaction process using refrigerant blends of Propane-NH3, Propane-SO2 and Propane-CO2 ».
Heliyon, vol. 6, nº 8.
Naseri, Emad, Butler, Haley, MacNevin, Wyatt, Ahmed, Marya and Ahmadi, Ali.
2020.
« Low-temperature solvent-based 3D printing of PLGA: A parametric printability study ».
Drug Development and Industrial Pharmacy, vol. 46, nº 2.
pp. 173-178.
Naseri, Emad, Cartmell, Christopher, Saab, Matthew, Kerr, Russell G. and Ahmadi, Ali.
2020.
« Development of 3D printed drug-eluting scaffolds for preventing piercing infection ».
Pharmaceutics, vol. 12, nº 9.
Pope, Emily, Alkayyali, Tartela, Wheatley, Sydney K., Cartmell, Christopher, McDonald, Jultwahnique, Haltli, Bradley, Kerr, Russell G. and Ahmadi, Ali.
2020.
« Optimization of marine bacteria microencapsualtion for the discovery of novel marine natural products ».
In MicroTAS 2020 - 24th International Conference on Miniaturized Systems for Chemistry and Life Sciences (En ligne, Oct. 04-09, 2020)
pp. 811-812.
Chemical and Biological Microsystems Society.
Wheatley, Sydney K., Cartmell, Christopher, Haltli, Bradley A., Kerr, Russell G. and Ahmadi, Ali.
2020.
« Development of a micro-microbial domestication pod for in-situ marine bacterial cultivation ».
In MicroTAS 2020 - 24th International Conference on Miniaturized Systems for Chemistry and Life Sciences (En ligne, Oct. 04-09, 2020)
pp. 438-439.
Chemical and Biological Microsystems Society. 2019
Alkayyali, T., Cameron, T., Haltli, B., Kerr, R. G. and Ahmadi, A..
2019.
« Microfluidic and cross-linking methods for encapsulation of living cells and bacteria - A review ».
Analytica Chimica Acta, vol. 1053.
pp. 1-21.
Alkayyali, Tartela, Pope, Emily, Haltli, Bradley, Kerr, Russell G. and Ahmadi, Ali.
2019.
« Cultivation of 'uncultivable' marine sediment bacteria using a microbial domestication pod (MD Pod) ».
In 23rd International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Basel, Switzerland, Oct. 27-31, 2019)
pp. 528-529.
Chemical and Biological Microsystems Society.
MacCallum, Ben, Naseri, Emad, MacNevin, Wyatt and Ahmadi, Ali.
2019.
« 3D bioprinting of alginate hydrogel scaffolds using fine calcium chloride mist droplets ».
In 23rd International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Basel, Switzerland, Oct. 27-31, 2019)
pp. 1668-1669.
Chemical and Biological Microsystems Society.
Warner, Cael, McDermid, Cameron M., Ahmadi, Ali and Markley, Loïc.
2019.
« Impact of electrode design and voltage waveform on low-potential magnetohydrodynamic fluid actuation ».
Microfluidics and Nanofluidics, vol. 23, nº 7.
2018
Alkayyali, Tartela, Haltli, Bradley, Kerr, Russell G. and Ahmadi, Ali.
2018.
« A microbial domestication pod for the discovery of natural products ».
In 22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Kaohsiung, Taiwan, Nov. 11-15, 2018)
pp. 1707-1710.
Chemical and Biological Microsystems Society.
Mazyan, W. I., Ahmadi, A., Brinkerhoff, J., Ahmed, H. and Hoorfar, M..
2018.
« Enhancement of cyclone solid particle separation performance based on geometrical modification: Numerical analysis ».
Separation and Purification Technology, vol. 191.
pp. 276-285. 2017
Gallant, B., Gamble, A., Harding, C., Mayhew, J., Parker, A., Simmons, A. and Ahmadi, A..
2017.
« Ultra-portable, selective and diffusion-based breathalyzer ».
In ISOCS/IEEE International Symposium on Olfaction and Electronic Nose (ISOEN) (Montreal, QC, Canada, May 28-31, 2017)
Institute of Electrical and Electronics Engineers Inc..
Mazyan, W. I., Ahmadi, A., Ahmed, H. and Hoorfar, M..
2017.
« Enhancement of solid particle separation efficiency in gas cyclones using electro-hydrodynamic method ».
Separation and Purification Technology, vol. 182.
pp. 29-35.
Mazyan, W. I., Ahmadi, A., Ahmed, H. and Hoorfar, M..
2017.
« Increasing efficiency of natural gas cyclones through addition of tangential chambers ».
Journal of Aerosol Science, vol. 110.
pp. 36-42.
Paknahad, Mohammad, Ahmadi, Ali, Rousseau, Jacques, Nejad, Hojatollah Rezaei and Hoorfar, Mina.
2017.
« On-chip electronic nose for wine tasting: A digital microfluidic approach ».
IEEE Sensors Journal, vol. 17, nº 14.
pp. 4322-4329.
Paknahad, Mohammad, Bachhal, Jannat Singh, Ahmadi, Ali and Hoorfar, Mina.
2017.
« Characterization of channel coating and dimensions of microfluidic-based gas detectors ».
Sensors and Actuators, B: Chemical, vol. 241.
pp. 55-64. 2016
Ahmadi, A., McDermid, C. M. and Markley, L..
2016.
« Magnetohydrodynamic actuation of droplets for millimetric planar fluidic systems ».
Applied Physics Letters, vol. 108, nº 1.
Cheng, Eric, Yu, Haoran, Ahmadi, Ali and Cheung, Karen C..
2016.
« Investigation of the hydrodynamic response of cells in drop on demand piezoelectric inkjet nozzles ».
Biofabrication, vol. 8, nº 1.
Cheng, Eric, Yu, Haoran, Ahmadi, Ali and Cheung, Karen C..
2016.
« Rheological manipulation for improved reliability in inkjet printing of living cells ».
In IEEE 29th International Conference on Micro Electro Mechanical Systems (MEMS) (Shanghai, China, Jan. 24-28, 2016)
pp. 784-787.
Institute of Electrical and Electronics Engineers Inc..
Li, Y., Ahmadi, A., Yu, H. and Cheung, K. C..
2016.
« Beyond poisson: Passive focusing toward one-cell-per-drop printing ».
In 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Dublin, Ireland, Oct. 09-13, 2016)
pp. 735-736.
Chemical and Biological Microsystems Society.
Li, Yan, Cheng, Eric, Yu, Haoran, Ahmadi, Ali and Cheung, Karen C..
2016.
« Investigations of bio-ink rheological properties for drop on demand piezoelectric cell printing ».
In Solid-State Sensors, Actuators and Microsystems Workshop (Hilton Head Island, SC, USA, June 05-09, 2016)
pp. 306-309.
Transducer Research Foundation.
Mazyan, W. I., Ahmadi, A., Jesus, R. D., Ahmed, H. and Hoorfar, M..
2016.
« Use of ferrous powder for increasing the efficiency of solid particle filtration in natural gas cyclones ».
Separation Science and Technology, vol. 51, nº 12.
pp. 2098-2104.
Mazyan, W., Ahmadi, A., Ahmed, H. and Hoorfar, M..
2016.
« Market and technology assessment of natural gas processing: A review ».
Journal of Natural Gas Science and Engineering, vol. 30.
pp. 487-514.
Paknahad, Mohammad, Ahmadi, Ali, Enright, Breanne, Cheung, Karen C. and Hoorfar, Mina.
2016.
« Density-based single particle isolation using micro-wells on digital microfluidics ».
In 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Dublin, Ireland, Oct. 09-13, 2016)
pp. 880-881.
Chemical and Biological Microsystems Society.
Paknahad, Mohammad, Ahmadi, Ali and Hoorfar, Mina.
2016.
« Diffusion-based microfluidic breath analyzer for detection of cannabis use ».
In 20th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Dublin, Ireland, Oct. 09-13, 2016)
pp. 1272-1273.
Chemical and Biological Microsystems Society.
Paknahad, Mohammad, Bachhal, Jannat Singh, Ahmadi, Ali and Hoorfar, Mina.
2016.
« Highly selective multi-target 3D-printed microfluidic-based breath analyzer ».
In IEEE 29th International Conference on Micro Electro Mechanical Systems (MEMS) (Shanghai, China, Jan. 24-28, 2016)
pp. 905-908.
Institute of Electrical and Electronics Engineers Inc..
Parker, B., Samanipour, R., Ahmadi, A. and Kim, K..
2016.
« Rapid fabrication of circular channel microfluidic flow-focusing devices for hydrogel droplet generation ».
Micro and Nano Letters, vol. 11, nº 1.
pp. 41-45.
Samanipour, Roya, Wang, Zongjie, Ahmadi, Ali and Kim, Keekyoung.
2016.
« Experimental and computational study of microfluidic flow-focusing generation of gelatin methacrylate hydrogel droplets ».
Journal of Applied Polymer Science, vol. 133, nº 29.
2015
Cheng, E., Ahmadi, A. and Cheung, K. C..
2015.
« Measurement of the oscillatory flow field inside tapered cylindrical inkjet nozzles using micro-particle image velocimetry ».
Microfluidics and Nanofluidics, vol. 19, nº 3.
pp. 635-646.
He, K., Ahmadi, A., Walus, K. and Stoeber, B..
2015.
« On demand EWOD dropl let formation at a microfluidic T-junction ».
In Transducers - 2015 18th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS) (Anchorage, AK, USA, June 21-25, 2015)
pp. 1846-1849.
Institute of Electrical and Electronics Engineers Inc..
Luka, George, Ahmadi, Ali, Najjaran, Homayoun, Alocilja, Evangelyn, Derosa, Maria, Wolthers, Kirsten, Malki, Ahmed, Aziz, Hassan, Althani, Asmaa and Hoorfar, Mina.
2015.
« Microfluidics integrated biosensors: A leading technology towards lab-on-A-chip and sensing applications ».
Sensors, vol. 15, nº 12.
pp. 30011-30031.
Mazyan, W. I., Ahmadi, A., Ahmed, H. and Hoorfar, M..
2015.
« Investigation of methods of enhancing the performance of propane pre-cooling refrigeration cycles in natural gas liquefaction processes ».
In Abu Dhabi International Petroleum Exhibition and Conference (ADIPEC) (Abu Dhabi, UAE, Nov. 09-12, 2015)
Society of Petroleum Engineers.
Nejad, Hojatollah Rezaei, Samiei, Ehsan, Ahmadi, Ali and Hoorfar, Mina.
2015.
« Gravity-driven hydrodynamic particle separation in digital microfluidic systems ».
RSC Advances, vol. 5, nº 45.
pp. 35966-35975.
Yafia, M., Ahmadi, A., Yesilcimen, K., Hoorfar, M. and Najjaran, H..
2015.
« Low cost smartphone controlled digital microfluidic chip in a 3D-printed modular assembly with replacable glass and screen printed paper chips ».
In MicroTAS 2015 - 19th International Conference on Miniaturized Systems for Chemistry and Life Sciences (Gyeongju, South Korea, Oct. 25-29, 2015)
pp. 2099-2100.
Chemical and Biological Microsystems Society.
Yafia, Mohamed, Ahmadi, Ali, Hoorfar, Mina and Najjaran, Homayoun.
2015.
« Ultra-portable smartphone controlled integrated digital microfluidic system in a 3D-printed modular assembly ».
Micromachines, vol. 6, nº 9.
pp. 1289-1305. 2014
Cheng, Eric, Ahmadi, Ali and Cheung, Karen C..
2014.
« Investigation of the hydrodynamics of suspended cells for reliable inkjet cell printing ».
In ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels collocated with the ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting (Chicago, IL, USA, Aug. 03-07, 2014)
American Society of Mechanical Engineers.
Rezaei Nejad, H., Samiei, E., Ahmadi, A. and Hoorfar, M..
2014.
« Hydrodynamic density-based particle focusing in digital microfluidic systems ».
In 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (San Antonio, TX, USA, Oct. 26-30, 2014)
pp. 1446-1448.
Chemical and Biological Microsystems Society.
Winer, M. H., Ahmadi, A. and Cheung, K. C..
2014.
« Effects of density difference between particles and fluid on inertial focusing positions in transient micro-flows ».
In 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (San Antonio, TX, USA, Oct. 26-30, 2014)
pp. 2462-2464.
Chemical and Biological Microsystems Society.
Winer, Michael H., Ahmadi, Ali and Cheung, Karen C..
2014.
« Apparent size correlation: A simple method to determine vertical positions of particles using conventional microscopy ».
In IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS) (San Francisco, CA, USA, Jan. 26-30, 2014)
pp. 939-942.
Institute of Electrical and Electronics Engineers Inc..
Winer, Michael H., Ahmadi, Ali and Cheung, Karen C..
2014.
« Application of a three-dimensional (3D) particle tracking method to microfluidic particle focusing ».
Lab on a Chip, vol. 14, nº 8.
pp. 1443-1451.
Winer, Michael H., Ahmadi, Ali and Cheung, Karen C..
2014.
« Transient inertial flows: A new degree of freedom for particle focusing in microfluidic channels ».
In IEEE 27th International Conference on Micro Electro Mechanical Systems (MEMS) (San Francisco, CA, USA, Jan. 26-30, 2014)
pp. 1051-1054.
Institute of Electrical and Electronics Engineers Inc.. 2013
Ahmadi, Ali, Buat, Matthew D. and Hoorfar, Mina.
2013.
« Microdroplet evaporation in closed digital microfluidic biochips ».
Journal of Micromechanics and Microengineering, vol. 23, nº 4.
Beyer, S. T., Bsoul, A., Ahmadi, A. and Walus, K..
2013.
« 3D alginate constructs for tissue engineering printed using a coaxial flow focusing microfluidic device ».
In Transducers & Eurosensors XXVII: The 17th International Conference on Solid-State Sensors, Actuators and Microsystems (TRANSDUCERS & EUROSENSORS XXVII) (Barcelona, Spain, June 16-20, 2013)
pp. 1206-1209.
IEEE.
Bsoul, Anas, Beyer, Simon, Ahmadi, Ali, Stoeber, Boris, Cretu, Edniond and Walus, Konrad.
2013.
« Molded biocompatible and disposable PDMS/SU-8 inkjet dispenser ».
In 17th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS) (Freiburg, Germany, Oct. 27-31, 2013)
pp. 636-638.
Chemical and Biological Microsystems Society. 2012
Ahmadi, Ali, Devlin, Kurt D. and Hoorfar, Mina.
2012.
« Numerical study of the microdroplet actuation switching frequency in digital microfluidic biochips ».
Microfluidics and Nanofluidics, vol. 12, nº 1-4.
pp. 295-305.
Chahal, Daljeet, Ahmadi, Ali and Cheung, Karen C..
2012.
« Improving piezoelectric cell printing accuracy and reliability through neutral buoyancy of suspensions ».
Biotechnology and Bioengineering, vol. 109, nº 11.
pp. 2932-2940. 2011
Ahmadi, Ali, Holzman, Jonathan F., Najjaran, Homayoun and Hoorfar, Mina.
2011.
« Electrohydrodynamic modeling of microdroplet transient dynamics in electrocapillary-based digital microfluidic devices ».
Microfluidics and Nanofluidics, vol. 10, nº 5.
pp. 1019-1032.
Ahmadi, Ali and Hoorfar, Mina.
2011.
« Numerical investigation of the combined effects of biomolecular adsorption and microdroplet evaporation on the performance of the electrocapillary-based digital microfluidic systems ».
In ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels (Edmonton, AB, Canada, June 19-22, 2011)
pp. 139-147.
The American Society of Mechanical Engineers. 2010
Ahmadi, A., Devlin, K. D., Najjaran, H., Holzman, J. F. and Hoorfar, M..
2010.
« Biomolecular adsorption phenomena in electrowetting-based digital microfluidic devices ».
In Nanotechnology 2010: Electronics, Devices, Fabrication, MEMS, Fluidics and Computational - Technical Proceedings of the 2010 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2010 (Anaheim, CA, USA, June 21-24, 2010)
pp. 452-455.
Boston, Mass. ; Boca Raton, Fla. : Nano Science and Technology Institute ; CRC Press.
Ahmadi, Ali, Devlin, Kurt D., Najjaran, Homayoun, Holzman, Jonathan F. and Hoorfar, Mina.
2010.
« In situ characterization of microdroplet interfacial properties in digital microfluidic systems ».
Lab on a Chip, vol. 10, nº 11.
pp. 1429-1435.
Ahmadi, Ali, Holzman, Jonathan F., Najjaran, Homayoun and Hoorfar, Mina.
2010.
« Numerical multiphysics modeling of microdroplet motion dynamics in digital microfluidic systems ».
In ASME 2010 8th International Conference on Nanochannels, Microchannels, and Minichannels collocated with 3rd Joint US-European Fluids Engineering Summer Meeting (Montreal, QC, Canada, Aug. 01-05, 2010)
pp. 249-253.
The American Society of Mechanical Engineers.
Devlin, K. D., Ahmadi, A., Najjaran, H., Holzman, J. F. and Hoorfar, M..
2010.
« Dynamic sampling in digital microfluidic devices ».
In Micro- and Nanotechnology Sensors, Systems, and Applications II (Orland, FL, USA, May 5, 2010)
Coll. « Proceedings of SPIE », vol. 7679.
SPIE. 2009
Ahmadi, A., Najjaran, H., Holzman, J. F. and Hoorfar, M..
2009.
« Determination of droplet shape in digital microfluidic systems using two-dimensional flow analysis ».
In Technical Proceedings of the 2009 NSTI Nanotechnology Conference and Expo, NSTI-Nanotech 2009 (Houston, TX, USA, May 03-07, 2009)
pp. 351-354.
Boston : Nano Science and Technology Institute.
Ahmadi, A., Najjaran, H., Holzman, J. F. and Hoorfar, M..
2009.
« Two-dimensional flow dynamics in digital microfluidic systems ».
Journal of Micromechanics and Microengineering, vol. 19, nº 6.
Ahmadi, A., Nichols, J., Hoorfar, M., Najjaran, H. and Holzman, J. F..
2009.
« Digital implementations for integrated microfluidic sensing ».
In Micro- and Nanotechnology Sensors, Systems, and Applications (Orlando, FL, USA, Apr. 15-17, 2009)
Coll. « Proceedings of SPIE », vol. 7318.
SPIE.
Nichols, Jacqueline, Ahmadi, Ali, Hoorfar, Mina, Najjaran, Homayoun and Holzman, Jonathan F..
2009.
« In situ digital microfluidic conductance sampling ».
Sensors and Actuators, A: Physical, vol. 152, nº 1.
pp. 13-20. 2008
Ahmadi, A., Najjaran, H., Holzman, J. F. and Hoorfar, M..
2008.
« Numerical modeling of microdrop motion in a digital microfluidic multiplexer ».
In Technical Proceedings of the 2008 NSTI Nanotechnology Conference and Trade Show, NSTI-Nanotech, Nanotechnology 2008 (Boston, MA, USA, June 01-05, 2008)
pp. 561-564.
Boston ; Boca Raton, FL : Nano Science and Technology Institute ; CRC Press.
Nichols, Jackie, Ahmadi, Ali, Hoorfar, Mina, Najjaran, Homayoun and Holzman, Jonathan F..
2008.
« Micro-drop actuation using multiplexer structures ».
In ASME 2008 6th International Conference on Nanochannels, Microchannels, and Minichannels (Darmstadt, Germany, June 23-25, 2008)
pp. 1085-1092.
The American Society of Mechanical Engineers. |
![[up]](/style/images/multi_up.png)
Up a level