ENGLISH
La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS
RECHERCHER

Liste des publications de "Causse, Philippe"

Exporter en format [Atom feed] Atom [RSS feed] RSS 1.0 [RSS2 feed] RSS 2.0
Groupement par Année | Type de document | Sans groupement
Aller à 2023 | 2022 | 2021 | 2020 | 2019 | 2018 | 2017 | 2016 | 2015 | 2013 | 2012 | 2011
Nombre de documents archivés : 38.

2023

Yang, Bin, Sun, Yixum, Trochu, François, Béguin, Cédric, Wang, Jihui et Causse, Philippe. 2023. « Performance evaluation of unidirectional molds used for measuring saturated transverse permeability of engineering textiles ». Composites Part A: Applied Science and Manufacturing, vol. 169.
Compte des citations dans Scopus : 2.

2022

Feng, Yuwei, Causse, Philippe, Wang, Jihui et Trochu, François. 2022. « A coupled 1D/2D co simulation approach for flow pattern of fiber reinforced composite in the VARTM process ». Affiche présentée lors de la conférence : Colloque du Centre de Recherche sur les Systèmes Polymères et Composites à haute performance (CREPEC) (Montreal, QC, Canada, 08 déc. 2022).

Grofti, Zaynab, Croteau-Labouly, Bruno, Boukhili, Rachid, Causse, Philippe, Belouettar, Salim, Perrin, Henri et Trochu, François. 2022. « Simultaneous characterization of preform expansion and permeability in vacuum assisted resin infusion ». Polymer Composites, vol. 43, nº 6. pp. 3560-3573.
Compte des citations dans Scopus : 4.

Sun, Yinxun, Beguin, Cédric, Causse, Philippe, Benmokrane, Brahim et Trochu, François. 2022. « Convective heat transfer between a bead packing and its bounding wall: Part I-Theory ». Transport in Porous Media, vol. 143, nº 2. pp. 397-416.
Compte des citations dans Scopus : 1.

Sun, Yixun, Béguin, Cédric, Causse, Philippe, Benmokrane, Brahim et Trochu, François. 2022. « Convective heat transfer between a bead packing and its bounding wall ». Affiche présentée lors de la conférence : Journée du génie par la simulation (Montreal, QC, Canada, May 20, 2022).

Sun, Yixun, Beguin, Cédric, Causse, Philippe, Benmokrane, Brahim et Trochu, François. 2022. « Convective heat transfer between a bead packing and its bounding wall: Part II-Numerical analysis and experimental validation ». Transport in Porous Media, vol. 143, nº 1. pp. 1-22.
Compte des citations dans Scopus : 1.

Sun, Yixun, Béguin, Cédric, Causse, Philippe, Benmokrane, Brahim et Trochu, François. 2022. « Experimental and numerical investigation of wall temperature in a heated pipe filled with beads ». International Journal of Heat and Mass Transfer, vol. 192.
Compte des citations dans Scopus : 1.

Trochu, F., Yang, B., Wang, J., Béguin, C. et Causse, P.. 2022. « Creation of digital material twin (dmt) geometric models of high performance composites based on x-ray microtomography ». In 20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM (Lausanne, Suisse, June 26-30, 2022) pp. 674-681. Ecole Polytechnique Federale de Lausanne (EPFL).

Yang, Bin, Huang, Wei, Causse, Philippe, Beguin, Cédric, Wang, Jihui et Trochu, François. 2022. « On the design of test molds based on unidirectional saturated flows to measure transverse permeability in liquid composite molding ». Polymer Composites, vol. 43, nº 4. pp. 2234-2251.
Compte des citations dans Scopus : 8.

Yang, Bin, Trochu, François, Béguin, Cédric, Wang, Jihui et Causse, Philippe. 2022. « Tomographic modelling of engineering textiles for numerical simulation: A parametric approach ». Affiche présentée lors de la conférence : Colloque du Centre de Recherche sur les Systèmes Polymères et Composites à haute performance (CREPEC) (Montreal, QC, Canada, 08 déc. 2022).

2021

Belot, Igor, Sun, Yisun, Vidal, David, Votsmeier, Martin, Causse, Philippe, Trochu, François et Bertrand, François. 2021. « A 3D additive manufacturing approach for the validation of a numerical wall-scale model of catalytic particulate filters ». Chemical Engineering Journal, vol. 405.
Compte des citations dans Scopus : 9.

Yong, A. X. H., Aktas, A., May, D., Endruweit, A., Advani, S., Hubert, P., Abaimov, S. G., Abliz, D., Akhatov, I., Ali, M. A., Allen, T., Berg, D. C., Bickerton, S., Brauner, C., Brütsch, D., Caglar, B., Caglar, H., Causse, P., Chiminelli, A., Cohades, A., Comas-Cardona, S., Danzi, M., Dittmann, J., Dransfeld, C., Ermanni, P., Fauster, E., Garcia-Manrique, J. A., George, A., Graupner, R., Grishaev, V., Guilloux, A., Hancioglu, M., Harizi, W., Herman, T., Huang, W., Kabachi, M. A., Keller, A., Kind, K., Laspalas, M., Lebedev, O. V., Lizaranzu, M., Long, A. C., Masania, K., Michaud, V., Middendorf, P., Salvatori, D., Schubnel, R., Sharp, N., Sozer, M., Thomas, J., Trochu, F., Umer, R., Valette, J., Wang, J. H. et Willenbacher, B.. 2021. « Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise ». Composites Part A: Applied Science and Manufacturing, vol. 148.
Compte des citations dans Scopus : 34.

Yong, A. X. H., Aktas, A., May, D., Endruweit, A., Lomov, S. V., Advani, S., Hubert, P., Abaimov, S. G., Abliz, D., Akhatov, I., Ali, M. A., Allaoui, S., Allen, T., Berg, D. C., Bickerton, S., Caglar, B., Causse, P., Chiminelli, A., Comas-Cardona, S., Danzi, M., Dittmann, J., Dransfeld, C., Ermanni, P., Fauster, E., George, A., Gillibert, J., Govignon, Q., Graupner, R., Grishaev, V., Guilloux, A., Kabachi, M. A., Keller, A., Kind, K., Large, D., Laspalas, M., Lebedev, O. V., Lizaranzu, M., Long, A. C., López, C., Masania, K., Michaud, V., Middendorf, P., Mitschang, P., van Oosterom, S., Schubnel, R., Sharp, N., Sousa, P., Trochu, F., Umer, R., Valette, J. et Wang, J. H.. 2021. « Experimental characterisation of textile compaction response: A benchmark exercise ». Composites Part A: Applied Science and Manufacturing, vol. 142.
Compte des citations dans Scopus : 26.

2020

Di Fratta, Claudio, Sun, Yixum, Causse, Philippe et Trochu, François. 2020. « A dimensionless characteristic number for process selection and mold design in composites manufacturing: Part I—Theory ». Journal of Composites Science, vol. 4, nº 1.
Compte des citations dans Scopus : 5.

Di Fratta, Claudio, Sun, Yixun, Causse, Philippe et Trochu, François. 2020. « A dimensionless characteristic number for process selection and mold design in composites manufacturing: Part II—Applications ». Journal of Composites Science, vol. 4, nº 1.
Compte des citations dans Scopus : 3.

Huang, W., Causse, P., Hu, H., Belouettar, S. et Trochu, F.. 2020. « Transverse compaction of 2D glass woven fabrics based on material twins – Part I: Geometric analysis ». Composite Structures, vol. 237.
Compte des citations dans Scopus : 26.

Huang, W., Causse, P., Hu, H., Belouettar, S. et Trochu, F.. 2020. « Transverse compaction of 2D glass woven fabrics based on material twins – Part II: Tow and fabric deformations ». Composite Structures, vol. 237.
Compte des citations dans Scopus : 23.

Huang, Wei, Causse, Philippe, Hu, Heng et Trochu, François. 2020. « Numerical and experimental investigation of saturated transverse permeability of 2D woven glass fabrics based on material twins ». Polymer Composites, vol. 41, nº 4. 1341–1355.
Compte des citations dans Scopus : 21.

Sun, Yixun, Causse, Philippe, Benmokrane, Brahim et Trochu, François. 2020. « Permeability measurement of granular porous materials by a modified falling-head method ». Journal of Engineering Mechanics, vol. 146, nº 9.
Compte des citations dans Scopus : 6.

2019

Anne, F., Béguin, C., Etienne, S., Causse, P., Scott, D. et Bornard, L.. 2019. « Void fraction and bubble size measurement inside clouds of air bubbles in flowing water ». In 38th IAHR World Congress : 'Water – Connecting the World" (Panama city, Panama, Sept. 01-06, 2019) IAHR.

Huang, W., Causse, P., Brailovski, V., Hu, H. et Trochu, F.. 2019. « Reconstruction of mesostructural material twin models of engineering textiles based on Micro-CT Aided Geometric Modeling ». Composites Part A: Applied Science and Manufacturing, vol. 124.
Compte des citations dans Scopus : 90.

Huang, Wei, Huang, Qun, Liu, Yin, Yang, Jie, Hu, Heng, Trochu, François et Causse, Philippe. 2019. « A Fourier based reduced model for wrinkling analysis of circular membranes ». Computer Methods in Applied Mechanics and Engineering, vol. 345. pp. 1114-1137.
Compte des citations dans Scopus : 21.

Madra, Anna, Causse, Philippe, Trochu, François, Adrien, Jérôme, Maire, Eric et Breitkopf, Piotr. 2019. « Stochastic characterization of textile reinforcements in composites based on X-ray microtomographic scans ». Composite Structures, vol. 224.
Compte des citations dans Scopus : 6.

2018

Causse, P. et Trochu, F.. 2018. « Combined characterization of pore size distribution and permeability in fibrous textiles by capillary flow porometry ». In 14th International Conference on Flow Processing in Composite Materials (Lulea, Switzerland, May 30 - June 01, 2018)

Causse, Philippe, Ravey, Christophe et Trochu, François. 2018. « Capillary characterization of fibrous reinforcement and optimization of injection strategy in resin transfer molding ». Journal of Composites Science, vol. 2, nº 2.
Compte des citations dans Scopus : 17.

Trochu, F., Hilal, S., Huang, W., Sun, Y., Causse, P. et Brailovski, V.. 2018. « Reconstruction and data compression of three-dimensional composite fiber architecture from microtomographic images ». In 7th International Symposium on Air/Craft Materials (ACMA) (Compiègne, France, Apr. 24-26, 2018)

2017

Bonnard, B., Causse, P. et Trochu, F.. 2017. « Characterization of fibrous reinforcements by capillary flow porometry: influence of fiber volume fraction ». In 10th Canadian-International Conference on Composites : Advanced Composites in Addressing Global Challenges of the 21st Century (CANCOM) (Ottawa, ON, Canada, July 17-20, 2017)

Bonnard, Beliny, Causse, Philippe et Trochu, François. 2017. « Experimental characterization of the pore size distribution in fibrous reinforcements of composite materials ». Journal of Composite Materials, vol. 51, nº 27. pp. 3807-3818.
Compte des citations dans Scopus : 7.

2016

Bonnard, B., Causse, P. et Trochu, F.. 2016. « Experimental investigation of capillary flow porometry for characterization of dual scale porosity in fibrous reinforcements ». In 13th International Conference on Flow Processing in Composite Materials (Kyoto, Japan, July 06-08, 2016)

2015

Benavente, M., Causse, P., Vernet, N., Marcin, L., Godon, T. et Ruiz, E.. 2015. « Residual stresses in 3D interlock composites: characterization and simulation ». In 6th International Conference on Science and Technology of Composite Materials (COMAT) (Buenos Aires, Argentina, May 07-08, 2015)

Courteau-Godmaire, H., Fotsing, E. R., Causse, P., Lévesque, M. et Ruiz, E.. 2015. « Numerical modeling of resin shrinkage around insert in composite sandwich panels ». In 20th International Conference on Composite Materials (ICCM) (Copenhagen, Denmark, July 19-24, 2015) International Committee on Composite Materials.
Compte des citations dans Scopus : 2.

2013

Causse, P., Ruiz, E. et Trochu, F.. 2013. « Processing warpage of asymmetric composite panels manufactured by resin transfer molding ». In 19th International Conference on Composite Materials (ICCM) (Montréal, QC, Canada, July 28 - Aug. 02, 2013) pp. 440-447. International Committee on Composite Materials.

Causse, Philippe, Ruiz, Ed et Trochu, François. 2013. « Influence of preforming on the quality of curved composite parts manufactured by flexible injection ». International Journal of Material Forming, vol. 6, nº 3. pp. 341-362.
Compte des citations dans Scopus : 10.

Renaud, J., Causse, P., Ruiz, E. et Trochu, F.. 2013. « A study of consolidation equilibrium in composites made by flexible injection ». In 19th International Conference on Composite Materials (ICCM) (Montréal, QC, Canada, July 28 - Aug. 02, 2013) pp. 1223-1233. International Committee on Composite Materials.
Compte des citations dans Scopus : 1.

2012

Causse, Philippe, Ruiz, Edu et Trochu, François. 2012. « Spring-in behavior of curved composites manufactured by Flexible Injection ». Composites Part A: Applied Science and Manufacturing, vol. 43, nº 11. pp. 1901-1913.
Compte des citations dans Scopus : 15.

2011

Causse, P., Ruiz, E. et Trochu, F.. 2011. « Analysis of fiber preforming for improved manufacturing of curved parts by flexible injection ». In 18th International Conference on Composites Materials (ICCM) (Jeju, Korea, Republic of, Aug. 21-26, 2011) International Committee on Composite Materials.
Compte des citations dans Scopus : 1.

Causse, P., Ruiz, E. et Trochu, F.. 2011. « Fabrication of curved parts by flexible injection: Influence of processing conditions on composite quality and analysis of distortion ». In Proceedings of the American Society for Composites 2011-Twenty-Sixth Technical Conference (2011) (Montreal, QC, Canada, Sept. 26-28, 2011) pp. 1340-1351. DEStech Publications.

Causse, Philippe, Ruiz, Edu et Trochu, François. 2011. « Experimental study of flexible injection to manufacture parts of strong curvature ». Polymer Composites, vol. 32, nº 6. pp. 882-895.
Compte des citations dans Scopus : 9.

Cette liste a été générée le Thu Mar 28 01:43:41 2024 EDT.