List of publications of "Demers, Vincent"

2024

Côté, Raphaël, Delbergue, Dorian, Demers, Vincent, Demarquette, Nicole R., Charlon, Sébastien and Soulestin, Jérémie. 2024. « Influence of process parameters on the occurrence of defects and dimensional properties of green part produced by material extrusion of highly filled polymer ». Progress in Additive Manufacturing.
(In press)

Mirabi, Hamed, Mirakhorli, Fatemeh, Béland, Jean-François, Nadeau, François, Demers, Vincent and Bocher, Philippe. 2024. « On selecting proper process parameters for cold metal transfer (CMT)–based wire arc additive manufacturing (WAAM) process ». International Journal of Advanced Manufacturing Technology, vol. 133, nº 11-12. pp. 6083-6093.

Omrane, Mohamed Ahmed, Côté, Raphaël and Demers, Vincent. 2024. « Optimization of the printability envelope of low-viscosity powder-binder feedstocks used in material extrusion 3D printing ». Rapid Prototyping Journal, vol. 30, nº 2. pp. 364-377.

2023

Arès, Francis, Delbergue, Dorian and Demers, Vincent. 2023. « Injection flow rate threshold preventing atypical in-cavity pressure during low-pressure powder injection molding ». Powders, vol. 2, nº 4. pp. 709-726.

Côté, R., Delbergue, D. and Demers, V.. 2023. « Detection of defects in parts produced by material extrusion 3D printing using in-line pressure measurement ». In International Conference on Powder Metallurgy and Particulate Materials, PowderMet (Las Vegas , NV, USA, June 18-21, 2023)

Côté, Raphaël, Demers, Vincent, Demarquette, Nicole R., Charlon, Sébastien and Soulestin, Jérémie. 2023. « A strategy to eliminate interbead defects and improve dimensional accuracy in material extrusion 3D printing of highly filled polymer ». Additive Manufacturing, vol. 68.
Compte des citations dans Scopus : 19.

Cote, Raphaël, Demers, Vincent, Demarquette, Nicole R., Charlon, Sébastien and Soulestin, Jérémie. 2023. « Producing metallic parts using 3D printing of low-viscosity powder-binder feedstock: A feasibility study ». In 37th International Conference of the Polymer Processing Society (Fukuoka, Japan, Apr. 11-15, 2022) Coll. « AIP Conference Proceedings », vol. 2884. AIP Publishing.

Delbergue, D., Boudeau, L. and Demers, V. 2023. « Development of an aluminum-based feedstock for material extrusion 3D printing ». In International Conference on Powder Metallurgy and Particulate Materials, PowderMet (Las Vegas , NV, USA, June 18-21, 2023)

Demers, Vincent. 2023. « Material extrusion 3D printing using low-viscosity MIM-like feedstocks ». In International Conference on Powder Metallurgy and Particulate Materials, PowderMet (Las Vegas , NV, USA, June 18-21, 2023)

Haghniaz, Foad, Delbergue, Dorian, Côté, Raphaël and Demers, Vincent. 2023. « Mold filling behaviour of LPIM feedstocks using numerical simulations and real-scale injections ». Powder Metallurgy, vol. 66, nº 5.
Compte des citations dans Scopus : 2.

Kurusu, Rafael S., Gholami, Mohsen, Demarquette, Nicole R. and Demers, Vincent. 2023. « Surface properties of molds for powder injection molding and their effect on feedstock moldability and mold adhesion ». International Journal of Advanced Manufacturing Technology, vol. 126, nº 1-2. pp. 381-390.
Compte des citations dans Scopus : 3.

Meiabadi, Saleh, Demers, Vincent and Dufresne, Louis. 2023. « Smoothed particle hydrodynamics approach for simulation of non-newtonian flow of feedstocks used in powder injection molding ». Metals, vol. 13, nº 9.

Meiabadi, Saleh, Nematzadeh, Fardin, Kornokar, Kianoosh, Mostaan, Hossein, ShamsBorhan, Mahmoud, Khandan, Rasoul, Demers, Vincent, Lawrence, Jonathan and Moradi, Mahmoud. 2023. « Contrasting the mechanical and metallurgical properties of laser welded and gas tungsten arc welded S500MC steel ». Welding in the World, vol. 67, nº 9. pp. 2215-2224.
Compte des citations dans Scopus : 4.

Moradi, Mahmoud, Kornokar, Kianoosh, Nematzadeh, Fardin, Mostaan, Hossein, Meiabadi, Saleh, Demers, Vincent and Lawrence, Jonathan. 2023. « Microstructural and mechanical investigation on fiber laser welding of S500MC steel ». Sadhana - Academy Proceedings in Engineering Sciences, vol. 48, nº 1.
Compte des citations dans Scopus : 4.

Pelletier, Emmanuel and Demers, Vincent. 2023. « Testing the limits of low-viscosity feedstock in material extrusion 3D printing of highly-filled polymer ». Communication lors de la conférence : HI-AM Conference (Halifax, NS, Canada, June 27-28, 2023).

Tafti, Atefeh A., Demers, Vincent, Vachon, Guillem and Brailovski, Vladimir. 2023. « Influence of powder size on the moldability and sintered properties of irregular iron-based feedstock used in low-pressure powder injection molding ». Powder Technology, vol. 420.
Compte des citations dans Scopus : 8.

2022

Côté, R., Ancé, S., Charlon, S., Soulestin, J., Demers, V. and Demarquette, N.. 2022. « Impact of the process parameters on printing pressure experienced in material extrusion additive manufacturing of highly-filled polymer (MEAM-HP) ». Communication lors de la conférence : 37th International Conference of the Polymer Processing Society (PPS-37) (Fukuoka, Japan, Apr. 11-15, 2022).

Langlais, David, Demers, Vincent and Brailovski, Vladimir. 2022. « Rheology of dry powders and metal injection molding feedstocks formulated on their base ». Powder Technology, vol. 396, nº Part A. pp. 13-26.
Compte des citations dans Scopus : 16.

Majdi, Seyed Mohammad, Tafti, Atefeh Ayatollahi, Demers, Vincent, Vachon, Guillem and Brailovski, Vladimir. 2022. « Effect of powder particle shape and size distributions on the properties of low-viscosity iron-based feedstocks used in low-pressure powder injection moulding ». Powder Metallurgy, vol. 65, nº 2. pp. 170-180.
Compte des citations dans Scopus : 5.

Miclette, Olivier, Côté, Raphaël, Demers, Vincent and Brailovski, Vladimir. 2022. « Material extrusion additive manufacturing of low-viscosity metallic feedstocks: Performances of the plunger-based approach ». Additive Manufacturing, vol. 60, nº Part A.
Compte des citations dans Scopus : 13.

Saleh Meiabadi, Mohammad, Moradi, Mahmoud, Kazerooni, Afshin and Demers, Vincent. 2022. « Multi-objective optimisation of plastic injection moulding process using mould flow analysis and response surface methodology ». International Journal of Materials and Product Technology, vol. 64, nº 2. pp. 140-155.

2021

Azzouni, Mohamed, Demers, Vincent and Dufresne, Louis. 2021. « Mold filling simulation and experimental investigation of metallic feedstock used in low-pressure powder injection molding ». International Journal of Material Forming, vol. 14, nº 5. pp. 961-972.
Compte des citations dans Scopus : 6.

Côté, Raphaël, Azzouni, Mohamed and Demers, Vincent. 2021. « Impact of binder constituents on the moldability of titanium-based feedstocks used in low-pressure powder injection molding ». Powder Technology, vol. 381. pp. 255-268.
Compte des citations dans Scopus : 12.

Côté, Raphaël, Azzouni, Mohamed, Ghanmi, Oussema, Kapoor, Sarthak and Demers, Vincent. 2021. « Impact of rheological model on numerical simulation of low-pressure powder injection moulding ». Powder Metallurgy, vol. 64, nº 1. pp. 8-16.
Compte des citations dans Scopus : 1.

Demers, Vincent. 2021. « Review of low-pressure powder injection molding process ». In Proceedings of the 2021 International Conference on Powder Metallurgy & Particulate Materials (PowderMet2021) (Orlando, FL, USA, June 20-23, 2021) Metal Powder Industries Federation.

Demers, Vincent, Lamarre, Simon and Chatelain, Jean-François (inventeurs) 16 February 2021. « Low-pressure powder injection molding machine, kit and method ». École de technologie supérieure (titulaire(s)). US 10,919,092.

Ghanmi, O. and Demers, V.. 2021. « Molding properties of titanium-based feedstock used in low-pressure powder injection molding ». Powder Technology, vol. 379. pp. 515-525.
Compte des citations dans Scopus : 17.

Moradi, Mahmoud, Meiabadi, Mohammad Saleh and Demers, Vincent. 2021. « A numerical investigation of friction stir welding parameters in joining dissimilar aluminium alloys using finite element method ». International Journal of Manufacturing Research, vol. 16, nº 1. pp. 32-51.

Tafti, Atefeh A., Demers, Vincent, Majdi, Seyed M., Vachon, Guillem and Brailovski, Vladimir. 2021. « Effect of thermal debinding conditions on the sintered density of low-pressure powder injection molded iron parts ». Metals, vol. 11, nº 2.
Compte des citations dans Scopus : 15.

Tafti, Atefeh A., Demers, Vincent, Vachon, Guillem and Brailovski, Vladimir. 2021. « Effect of binder constituents and solids loading on the rheological behavior of irregular iron-based feedstocks ». Journal of Manufacturing Science and Engineering, vol. 143, nº 3.
Compte des citations dans Scopus : 9.

Zedan, Y., Iben Houria, M., Vanderesse, N., Atmani, F., Mirakhorli, F., Nadeau, F., Demers, V. and Bocher, P.. 2021. « Fatigue properties of continuous wave and pulsed wave laser cold-wire welding of thick section AA6005-T6 aluminum alloys ». International Journal of Fatigue, vol. 147.
Compte des citations dans Scopus : 7.

2020

Ali, Ghalya, Demers, Vincent, Côté, Raphaël and Demarquette, Nicole R.. 2020. « Threshold concentration of surfactant agent in feedstocks used for low-pressure powder injection molding ». Materials Performance and Characterization, vol. 9, nº 4.
Compte des citations dans Scopus : 11.

Ben Trad, Mohamed Aziz, Demers, Vincent, Côté, Raphaël, Sardarian, Mehran and Dufresne, Louis. 2020. « Numerical simulation and experimental investigation of mold filling and segregation in low-pressure powder injection molding of metallic feedstock ». Advanced Powder Technology, vol. 31, nº 3. pp. 1349-1358.
Compte des citations dans Scopus : 15.

2019

Ben Trad, Mohamed Aziz, Demers, Vincent and Dufresne, Louis. 2019. « Effect of powder shape and size on rheological, thermal, and segregation properties of low-pressure powder injection molding feedstocks ». Journal of Materials Engineering and Performance, vol. 28, nº 9. pp. 5551-5562.
Compte des citations dans Scopus : 17.

Demers, V. 2019. « Low-pressure powder injection moulding review: enabling cost effective low and high volume PIM production ». PIM International, vol. 13, nº 2. pp. 53-63.

Demers, Vincent. 2019. « Low-pressure powder injection moulding : Enabling cost-effective low and high-volume production ». Powder Injection Moulding International, vol. 13, nº 2. pp. 53-61.

2018

Chen, Jianqiang, Demers, Vincent, Turner, Daniel P. and Bocher, Philippe. 2018. « Experimental investigation on high-cycle fatigue of inconel 625 superalloy brazed joints ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 49A, nº 4. pp. 1244-1253.
Compte des citations dans Scopus : 10.

Demers, V., Fareh, F., Turenne, S., Demarquette, N. R. and Scalzo, O.. 2018. « Experimental study on moldability and segregation of Inconel 718 feedstocks used in low-pressure powder injection molding ». Advanced Powder Technology, vol. 29, nº 1. pp. 180-190.
Compte des citations dans Scopus : 20.

Gholami, E. and Demers, V.. 2018. « Molding properties of cobalt-chrome-based feedstocks used in low-pressure powder injection molding ». In Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018 (San Antonio, TX, USA, June 17-20, 2018) pp. 253-264. Metal Powder Industries Federation.
Compte des citations dans Scopus : 2.

Gholami, Ehsan and Demers, Vincent. 2018. « Molding properties of cobalt-chrome-based feedstocks used in low-pressure powder injection molding ». International Journal of Mechanical and Production Engineering, vol. 6, nº 10. pp. 33-38.
Compte des citations dans Scopus : 2.

Texier, D., Atmani, F., Bocher, P., Nadeau, F., Chen, J., Zedan, Y., Vanderesse, N. and Demers, V.. 2018. « Fatigue performances of FSW and GMAW aluminum alloys welded joints: Competition between microstructural and structural-contact-fretting crack initiation ». International Journal of Fatigue, vol. 116. pp. 220-233.
Compte des citations dans Scopus : 43.

2017

Chen, Jianqiang, Demers, Vincent, Cadotte, Eve-Line, Turner, Daniel and Bocher, Philippe. 2017. « Structural performance of inconel 625 superalloy brazed joints ». Journal of Materials Engineering and Performance, vol. 26, nº 2. pp. 547-553.
Compte des citations dans Scopus : 15.

Demers, V., Elmajdoubi, M. M. and Bocher, P.. 2017. « Moldability of low-pressure powder injection molding feedstocks ». In Advances in Powder Metallurgy & Particulate Materials 2017 : Conference Proceedings (Las Vegas , NV, USA, June 13-16, 2017) pp. 401-414. Metal Powder Industries Federation.
Compte des citations dans Scopus : 2.

Fareh, F., Demers, V., Demarquette, N. R., Turenne, S. and Scalzo, O.. 2017. « Influence of segregation on rheological properties of wax-based feedstocks ». Powder Technology, vol. 320. pp. 273-284.
Compte des citations dans Scopus : 18.

Lamarre, Simon G., Demers, Vincent and Chatelain, Jean-François. 2017. « Low-pressure powder injection molding using an innovative injection press concept ». International Journal of Advanced Manufacturing Technology, vol. 91, nº 5-8. pp. 2595-2605.
Compte des citations dans Scopus : 24.

2016

Fareh, F. and Demers, V.. 2016. « Rheological behavior of Inconel 718 feedstocks used in low-pressure powder injection molding ». Affiche présentée lors de la conférence : ASM-Montréal : Soirée des étudiants (Montréal, QC, Canada, 9 mars 2016).

Fareh, F., Demers, V., Turenne, S. and Scalzo, O.. 2016. « Segregation measurement of inconel 718 feedstocks used in low-pressure metal injection molding ». In International Conference on Advanced Materials Engineering and Technology (ICAMET) (Kaohsiung City, Taiwan, Dec. 4-5, 2015) Coll. « Materials Science Forum », vol. 857. pp. 286-290. Trans Tech Publications Ltd.
Compte des citations dans Scopus : 8.

Fareh, Fouad, Demers, Vincent, Demarquette, Nicole R., Turenne, Sylvain and Scalzo, Orlando. 2016. « Molding properties of Inconel 718 feedstocks used in low-pressure powder injection molding ». Advances in Materials Science and Engineering, vol. 2016.
Compte des citations dans Scopus : 10.

Lamarre, S. G., Demers, V. and Chatelain, J-F.. 2016. « Experimental study of the rheological properties and moldability of wax-based feedstocks used in low-pressure powder injection molding ». In MONTREAL’2016 AES-ATEMA 28th International on Advances and Trends in Engineering Materials and their Applications (Montreal, QC, Canada, June 20-24, 2016) pp. 175-183. Advanced Engineering Solutions.

Lamarre, S., Demers, V. and Chatelain, J. F.. 2016. « Moldability of feedstock for LPIM ». Affiche présentée lors de la conférence : ASM-Montréal : Soirée des étudiants (Montréal, QC, Canada, 9 mars 2016).

Mourier, A., Demers, V., Baril, Y. and Figueroa, J.. 2016. « Characterization of copper-silver-copper joints fabricated by sintering of silver nanoparticles ». In International Conference & Exhibition on Advanced & Nano Materials (ICANM) (Montreal, QC, Canada, Aug. 01-03, 2016) pp. 145-155.

2015

Demers, V., Turenne, S. and Scalzo, O.. 2015. « Impact of binders on viscosity of low-pressure powder injection molded Inconel 718 superalloy ». Journal of Materials Science, vol. 50, nº 7. pp. 2893-2902.
Compte des citations dans Scopus : 12.

Demers, Vincent, Turenne, Sylvain and Scalzo, Orlando. 2015. « Segregation measurement of powder injection molding feedstock using thermogravimetric analysis, pycnometer density and differential scanning calorimetry techniques ». Advanced Powder Technology, vol. 26, nº 3. pp. 997-1004.
Compte des citations dans Scopus : 20.

Fareh, F., Demers, V., Turenne, S. and Scalzo, O.. 2015. « Segregation measurement of Inconel 718 feedstocks used in low-pressure metal injection molding ». Communication lors de la conférence : International Conference on Advanced materials engineering & technology (ICAMET 2015) (Kaohsiung, Taiwan, Dec. 4-6, 2015).

Prokoshkin, S., Brailovski, V., Inaekyan, K., Demers, V. and Kreitcberg, A.. 2015. « Nanostructured Ti–Ni shape memory alloys produced by thermomechanical processing ». Shape Memory and Superelasticity, vol. 1, nº 2. pp. 191-203.
Compte des citations dans Scopus : 18.

2011

Brailovski, Vladimir, Prokoshkin, S. D., Inaekyan, K. E. and Demers, V.. 2011. « Functional properties of nanocrystalline, submicrocrystalline and polygonized Ti-Ni alloys processed by cold rolling and post-deformation annealing ». Journal of Alloys and Compounds, vol. 509, nº 5. pp. 2066-2075.
Compte des citations dans Scopus : 72.

2009

Brailovski, Vladimir, Prokoshkin, S. D., Inaekyan, K. E. and Demers, V.. 2009. « Functional properties of nanocrystalline, submicrocrystalline and polygonized Ti-Ni alloys processed by cold rolling and post-deformation annealing ». In 8th European Symposium on Martensitic Transformations (ESOMAT) (Prague, Czech Republic, Sept. 7-11, 2009) Cedex A, France : E D P Sciences.

Demers, V., Brailovski, Vladimir, Prokoshkin, S. D. and Inaekyan, K. E.. 2009. « Thermomechanical fatigue of nanostructured Ti-Ni shape memory alloys ». Materials Science and Engineering: A, vol. 513-514. pp. 185-196.
Compte des citations dans Scopus : 64.

Demers, V., Brailovski, Vladimir, Prokoshkin, S. D. and Inaekyan, K. E.. 2009. « Optimization of the cold rolling processing for continuous manufacturing of nanostructured Ti-Ni shape memory alloys ». Journal of Materials Processing Technology, vol. 209, nº 6. pp. 3096-3105.
Compte des citations dans Scopus : 33.

Brailovski, V., Prokoshkin, S. D., Demers, V., Inaekyan, K. and Khmelevskaya, I. Yu. 2009. « Property features of Ti-Ni SMA subjected to severe cold rolling and post-deformation annealing ». In Proceedings of the International Conference on Martensitic Transformations, June 29-July 05, 2008 : ICOMAT : Santa Fe, New Mexico, USA, 2008 (Santa Fe, NM, USA, June 29-July 5, 2008) Coll. « International Conference on Martensitic Transformations (ICOMAT) » pp. 323-327. Warrendale, PA, USA : TMS (The Minerals, Metals & Materials Society).

2008

Prokoshkin, S. D., Brailovski, Vladimir, Inaekyan, K. E., Demers, V., Khmelevskaya, I. Yu, Dobatkin, S. V. and Tatyanin, E. V.. 2008. « Structure and properties of severely cold-rolled and annealed Ti-Ni shape memory alloys ». [Conference paper]. Materials Science and Engineering: A, vol. 481-482. pp. 114-118.
Compte des citations dans Scopus : 104.

Khmelevskaya, I., Prokoshkin, S., Brailovski, Vladimir, Inaekyan, K., Demers, V., Gurtovaya, I., Korotitskiy, A. and Dobatkin, S.. 2008. « Functional properties of Ti-Ni-based shape memory alloys ». In State-of-the-art Research and Application of SMAs Technologies (Acireale, Sicily, Italy, June 8-13, 2008) Coll. « Advances in Science and Technology », vol. 59. pp. 156-161. Stafa-Zuerich, Suisse : Trans Tech Publications Ltd.
Compte des citations dans Scopus : 7.

2007

Brailovski, Vladimir, Prokoshkin, S. D., Bastarash, E., Demers, V., Inaekyan, K. E. and Khmelevskaya, I. Yu. 2007. « Thermal stability and nanocrystallization of amorphous Ti-Ni alloys prepared by cold rolling and post-deformation annealing ». In THERMEC 2006 Coll. « Materials Science Forum », vol. 539-543. pp. 1964-1970. Switzerland : Trans Tech Publications Ltd.
Compte des citations dans Scopus : 9.

Demers, V., Brailovski, V., Prokoshkin, S., Inaekyan, K., Bastarash, E., Khmelevskaya, I. and Dobatkin, S.. 2007. « Functional properties of nanostructured Ti-50.0 at % Ni alloys ». In Fatigue and Fracture of Medical Metallic Materials and Devices (Dallas, TX, USA, Nov. 01, 2005) Coll. « ASTM Special Technical Publication », vol. 1481. pp. 34-44. American Society for Testing and Materials.

2006

Demers, V., Brailovski, Vladimir, Prokoshkin, S., Inaekyan, K., Bastarash, E., Khmelevskaya, I. and Dobatkin, S.. 2006. « Functional properties of nanostructured Ti-50.0 at % Ni alloys ». Journal of ASTM International, vol. 3, nº 6.
Compte des citations dans Scopus : 11.

Brailovski, Vladimir, Prokoshkin, Sergui D., Khmelevskaya, Irina Yu., Inaekyan, Karine E., Demers, Vincent, Dobatkin, Sergui V. and Tatyanin, Evgeny V.. 2006. « Structure and properties of the Ti–50.0 at%Ni alloy after strain hardening and nanocrystallizing thermomechanical processing ». Materials Transactions, vol. 47, nº 3. pp. 795-804.
Compte des citations dans Scopus : 100.

Brailovski, Vladimir, Prokoshkin, S. D., Khmelevskaya, I. Yu, Inaekyan, K. E., Demers, V., Bastarache, E., Dobatkin, S. V. and Tatyanin, E. V.. 2006. « Interrelations between the properties and structure of thermomechanically-treated equiatomic Ti-Ni alloy ». Materials Science and Engineering: A, vol. 438-440. pp. 597-601.
Compte des citations dans Scopus : 30.

Prokoshkin, S. D., Brailovski, Vladimir, Khmelevskaya, I. Yu, Dobatkin, S. V., Inaekyan, K. E., Demers, V., Bastarache, E. and Tatianin, E. V.. 2006. « Formation of nanocrystalline structure upon severe rolling plastic deformation and annealing and improvement of set of functional properties of Ti-Ni alloys ». Bulletin of the Russian Academy of Sciences : Physics, vol. 70, nº 9. pp. 1536-1541.
Compte des citations dans Scopus : 5.

2005

Prokoshkin, S., Brailovski, Vladimir, Khmelevskaya, I., Dobatkin, S., Inaekyan, K., Turilina, V., Demers, V. and Tat'yanin, E.. 2005. « Creation of substructure and nanostructure in thermomechanical treatment and control on functional properties of Ti-Ni alloys with shape memory effect ». Metal Science and Heat Treatment, vol. 47, nº 5-6. pp. 182-187.
Compte des citations dans Scopus : 22.

Inaekyan, K. E., Prokoshkin, S. D., Brailovski, V., Khmelevskaya, I. Yu., Demers, V., Dobatkin, S. V., Tatyanin, E. V. and Bastarache, E.. 2005. « Substructure and nanocrystalline structure effects in thermomechanically treated Ti-Ni alloys ». In Nanomaterials by Severe Plastic Deformation (Fukuoka, Japan, Sept. 22-26, 2005) Coll. « Materials Science Forum », vol. 503-504. pp. 597-602. Stafa-Zuerich, Switzerland : Trans Tech Publications Ltd.