ENGLISH
La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS
RECHERCHER

L'affiliation est "Génie mécanique"

Exporter en format [Atom feed] Atom [RSS feed] RSS 1.0 [RSS2 feed] RSS 2.0
Groupement par Professeur | Année | Type de document | Sans groupement
Nombre de documents archivés : 51.

Article publié dans une revue, révisé par les pairs

Beauchamp, Yves et Youssef, Youssef A.. 1998. « An effective approach to teach design of experiments (DOE) using calculation-and-analysis worksheets and computerized spreadsheets ». Computers & Industrial Engineering, vol. 35, nº 3-4. pp. 643-646.
Compte des citations dans Scopus : 7.

Carriere, Jean-Bernard, Dionne-Proulx, Jacqueline et Beauchamp, Yves. 1998. « Strategic management of new technologies and prevention of industrial accidents : theoretical framework and empirical analyses ». Human Factors and Ergonomics in Manufacturing & Service Industries, vol. 8, nº 1. pp. 1-22.
Compte des citations dans Scopus : 3.

Doré, Sylvie et Basque, Josianne. 1998. « Le concept d’environnement d’apprentissage informatisé ». Journal of Distance Education, vol. 13, nº 1. pp. 40-56.

Jaura, A., Osman, M. O. M. et Krouglicof, Nicholas. 1998. « Hybrid compliance control for intelligent assembly in a robot work cell ». International Journal of Production Research, vol. 36, nº 9. pp. 2573-83.
Compte des citations dans Scopus : 8.

Kajl, Stanislaw et Roberge, M-A.. 1998. « Impact du chaufage par réseau thermique sur l'efficacité de chaufage de bâtiments ». La Maîtrise de l'Énergie. pp. 24-26.

Langlois, Marc, Masson, Christian et Paraschivoiu, Ion. 1998. « Fully three-dimensional transition prediction on swept wings in transonic flows ». Journal of Aircraft, vol. 35, nº 2. pp. 254-259.
Compte des citations dans Scopus : 9.

Masounave, Jacques, Maugendre, S. et Scheed, L.. 1998. « Prédiction des efforts de perçage des métaux ». Matériaux et Techniques, vol. 86, nº 9-10. pp. 7-16.

Masson, Christian et Baliga, B. R.. 1998. « Simulation of gas-solid particle flows over a wide range of concentration ». International Journal for Numerical Methods in Fluids, vol. 28, nº 10. pp. 1441-1479.
Compte des citations dans Scopus : 9.

Masson, Christian, Leclerc, Christophe et Paraschivoiu, Ion. 1998. « Appropriate dynamic-stall models for performance predictions of VAWTs with NLF blades ». International Journal of Rotating Machinery, vol. 4, nº 2. pp. 129-139.
Compte des citations dans Scopus : 39.

Masson, Christian, Veilleux, Charles et Paraschivoiu, Ion. 1998. « Airfoil wave-drag prediction using Euler solutions of transonic flows ». Journal of Aircraft, vol. 35, nº 5. pp. 748-753.
Compte des citations dans Scopus : 9.

McComber, Pierre et Paradis, Alain. 1998. « A cable galloping model for thin ice accretions ». Atmospheric Research, vol. 46, nº 1-2. pp. 13-25.
Compte des citations dans Scopus : 59.

Piedboeuf, M. C., Gauvin, R. et Thomas, Marc. 1998. « Damping behaviour of shape memory alloys : strain amplitude, frequency and temperature effects ». Journal of Sound and Vibration, vol. 214, nº 5. pp. 885-901.
Compte des citations dans Scopus : 171.

Soulaïmani, Azzeddine et Saad, Yousef. 1998. « An arbitrary Lagrangian-Eulerian finite element method for solving three-dimensional free surface flows ». Computer Methods in Applied Mechanics and Engineering, vol. 162, nº 1-4. pp. 79-106.
Compte des citations dans Scopus : 65.

Thomas, Marc et Beauchamp, Yves. 1998. « Development of a new frequency weighting filter for the assessment of grinder exposure to wrist-transmitted vibration ». Computers & Industrial Engineering, vol. 35, nº 3-4. pp. 651-654.
Compte des citations dans Scopus : 15.

Compte rendu de conférence

Ammara, I., Leclerc, C. et Masson, C.. 1998. « A fully three-dimensional turbulent method for the analysis of horizontal-axis wind turbines in wind farms ». In Proceedings of ISROMAC-7: the 7th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 22-26 February, 1998, Honolulu, Hawaii, USA (Honolulu, HI, USA, Feb. 22-26, 1998) pp. 1782-1793. Minden, NV, USA : Bird Rock Publishing.

Beauchamp, Y. et Ngô, A. D.. 1998. « A survey of farmer's perception of safety and fatal accidents involving agricultural tractor in Québec ». In Manufacturing agility and hybrid automation-II: proceedings of the Six International Conference on Human Aspects of Advanced Manufacturing: Agility & Hybrid Automation, The Hong Kong University of Science and Technology, July 5-8, 1998, Hong Kong (Hong Kong, China, July 5-8, 1998) pp. 521-524. Santa Monica, CA, USA : IEA Press.

Chatelain, Jean-François. 1998. « Constrained alignment of measurement data within CAD solid zones for geometric tolerance verification ». In Actes du Forum Métrologie 98 (Québec, QC, Canada, nov. 1998) Québec, QC, Canada : Université Laval.

Dao, T. -M. et Nguyen, Q.. 1998. « Reliability optimization of mechanical structural systems using the fuzzy approach ». In Developments in theoretical and applied mechanics, volume XIX: proceedings of the Nineteenth Southeastern Conference on Theoretical and Applied Mechanics (Deerfield Beach, FL, USA, May 3-5, 1998) p. 145. Boca Raton, FL, USA : Florida Atlantic University.

Kajl, S., Roberge, M. -A. et Lamarche, L.. 1998. « Neural networks performance in room storage heater modelling ». In 9th International Conference of Air Conditioning and District Heating Wrocław'98, Szklarska Poręba 4-7.06.1998 (Wroclaw, Poland, June 4-6, 1998) pp. 249-256.

Lafleur, F., Thomas, M. et Laville, F.. 1998. « Modal analysis of electrical circuits using acoustical sources: methods, results and use ». In 4th Annual workshop on accelerated stress testing, AST'98 (Pasadena, CA, USA, Sept. 22-24, 1998) IEEE.

Langlois, Marc, MacDonald, Patric, Casalis, Gregoire, Masson, Christian et Paraschivoiu, Ion. 1998. « A detailed comparison of non-parallel stability results with experimental data ». In A collection of the 1998 ASME Wind Energy Symposium technical papers: at the 37th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, January 12-15, 1998 (Reno, NV, USA, Jan. 12-15, 1998) p. 8. Reston, VA, USA : American Institute of Aeronautics and Astronautics.

Langlois, Marc, MacDonald, Patric, Masson, Christian, Casalis, Grégoire et Paraschivoiu, Ion. 1998. « Stability analysis by the OS and PSE approaches: comparisons with experiments ». In ICAS 98: 21st congress of the International Council of the Aeronautical Sciences; Melbourne, Victoria, Australia, 13th - 18th September 1998; proceedings (Melbourne, Australia, Sept. 13-18, 1998) Reston, VA, USA : American Institute of Aeronautics and Astronautics.

Malinowski, P., Kajl, S., Tomczak, W. et Roberge, M. -A.. 1998. « New methods for energy-wise design of buildings ». In 9th International Conference of Air Conditioning and District Heating Wrocław'98, Szklarska Poręba 4-7.06.1998 (Wroclaw, Poland, June 4-6, 1998) pp. 309-314.

Masson, C. et Leclerc, C.. 1998. « Predictions of unsteady HAWT aerodynamics ». In Windpower '98: [proceedings] April 27 - May 1, 1998, Holiday Inn Select & Convention Center, Bakersfield, California: annual conference & exhibition of the American Wind Energy Association (Bakersfield, CA, USA, Apr. 27-May 1, 1998) pp. 385-394. Washington, DC, USA : American Wind Energy Association.

Masson, Christian, Ammara, Idriss, Leclerc, Christophe et Paraschivoiu, Ion. 1998. « Numerical simulations of the three-dimensional turbulent flow in a wind park ». In A collection of the 1998 ASME Wind Energy Symposium technical papers: at the 37th AIAA Aerospace Sciences Meeting and Exhibit, Reno, NV, January 12-15, 1998 (Reno, NV, USA, Jan. 12-15, 1998) pp. 282-293. Reston, VA, USA : American Institute of Aeronautics and Astronautics.

McComber, Pierre, De Lafontaine, Jean, Druez, Jacques, Laflamme, Jean et Paradis, Alain. 1998. « A comparison of neural network and multiple regression transmission line icing models ». In Proceedings of the Fifty-Fifth Annual Eastern Snow Conference (Jackson, NH, USA, June 2-3, 1998) pp. 91-99. Ontarion, Canada : Eastern Snow Conference.

Nadeau, Sylvie, Leblanc, D. et Gilbert, R.. 1998. « Gestion scientifique et organisationnelle des risques de maux de dos dans la nouvelle réalité des entreprises ». In Le génie industriel dans un monde sans frontières : 2e Congrès international franco-québécois du 3 au 5 septembre 1997, Albi (France) (Albi, France, 3-5 sept. 1997) Albi, France : Ecole des Mines.

Ngô, A. D., Beauchamp, Y. et LeHuy, P.. 1998. « A survey on the safety of presses-brakes in the manufacturing industries of transport equipment and machinery ». In Manufacturing agility and hybrid automation-II: proceedings of the Six International Conference on Human Aspects of Advanced Manufacturing: Agility & Hybrid Automation, The Hong Kong University of Science and Technology, July 5-8, 1998, Hong Kong (Hong Kong, China, July 5-8, 1998) pp. 525-528. Santa Monica, CA, USA : IEA Press.

Ngo, Anh Dung et Abdesslam, T. O.. 1998. « Prediction of the fatigue behavior of Graphite-Epoxy laminates using artificial neural network ». In Design and manufacturing of composites : proceedings of the Second Joint Canada-Japan Workshop on Composites, Concordia University, Montreal, Quebec, Canada, August 1998 (Montreal, Canada, Aug. 19-21, 1998) pp. 75-80. Lancaster, PA , États-Unis : Technomic Pub. Co. inc..

Petrov, Plamen, De Lafontaine, Jean et Tétreault, Mario. 1998. « Hybrid feedback control for the parking problem of a load-haul-dump mine vehicle ». In IEEE/RSJ International Conference on Intelligent Robots and Systems (Victoria, Canada, Oct. 13-17, 1998) pp. 1907-1912. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 13.

Soulaïmani, A. et Farhat, C.. 1998. « On a finite element method for solving compressible flows ». In Modeling and Simulation Based Engineering : Proceedings of the 1998 International Conference on Computational Engineering and Sciences (Atlanta, GA, USA, Oct. 6-9, 1998) pp. 923-927. Tech Science Press.

Soulaimani, Azzeddine. 1998. « Identification of the friction coefficient for steady and unsteady shallow-water flows ». In ASME International Mechanical Engineering Congress and Exposition (IMECE) (Anaheim, CA, USA, Nov. 15-20, 1998) pp. 49-63. New York, NY, USA : American Society of Mechanical Engineers.

Soulaimani, Azzeddine. 1998. « Identification of the friction coefficient for steady and unsteady shallow-water flows ». In ASME 1998 International Mechanical Engineering Congress and Exposition (Anaheim, CA, USA, Nov. 15-20, 1998) pp. 49-63. American Society of Mechanical Engineers (ASME).

Soulaimani, Azzeddine, Saad, Yousef et Qaddouri, Abdessamad. 1998. « Parallelization of a finite element CFD code using PSPARSLIB : application to three-dimensional free surface flows ». In 4th European Computational Fluid Dynamics Conference (Athens, Greece, Sept. 7-11, 1998) pp. 914-922. UK : John Wiley & Sons.

Toulouse, G., Beauchamp, Y. et Brosseau, M.. 1998. « Organisation temporelle de l'activité et régulation de la charge musculosquelettique: application d'un modèle d'intervention basé sur les niveaux opérationnels et stratégiques de l'organisation ». In Actes du 33e Congrès de la SELF, Temps et Travail (Paris, France, 16-18 sept. 1998) Paris, France : Société d'ergonomie de langue française.

Article de revue ou de magazine, non révisé par les pairs

La Mothe, Bernard, Laville, Frédéric, Thomas, Marc et Beauchamp, Yves. 1998. « Usinage et finition des pièces métalliques : une solution pour réduire le bruit, peu coûteuse et adaptable à d'autres milieux industriels ». Prévention au travail, vol. 11, nº 3. pp. 19-21.

Communication

Alinot, C., Leclerc, C. et Masson, Christian. 1998. « Simulation de l'écoulement tridimensionnel et turbulent dans un parc éolien ». Communication lors de la conférence : 66e Congrès de l'ACFAS (Québec, QC, Canada, mai 1998).

Brosseau, M. et Beauchamp, Yves. 1998. « Application d'une technique psychophysique pour l'évaluation comparative d'outils, d'équipements et de méthodes de travail ». Communication lors de la conférence : 18e Congrès de l'AQHSST (Laval, QC, Canada, mai 1998).

Chatelain, Jean-François. 1998. « Alignement imposé des points de mesure dans les zones de modèles solides pour la vérification des tolérances géométriques ». Communication lors de la conférence : Forum sur la Métrologie 98 (Laval, QC, Canada, nov. 1998).

Druez, J., McComber, Pierre et Farzaneh, M.. 1998. « Correlation between the data of an ice detector and the mass of ice accreted on different conductors ». Communication lors de la conférence : International Workshop on Atmospheric Icing of Structures (IWAIS '98) (Reykjavik, Iceland, June, 1998).

Lafleur, F., Thomas, Marc et Laville, Frédéric. 1998. « Analyse modale de circuits électroniques à l'aide de sources acoustiques : méthode, résultats et utilisation ». Communication lors de la conférence : 66e Congrès de l'ACFAS (Québec, QC, Canada, juin 1998).

Lafleur, F., Thomas, Marc et Laville, Frédéric. 1998. « Modal analysis of electronic circuits using acoustical sources : methods, results and use ». Communication lors de la conférence : 4th (AST) Accelerated Stress Testing Workshop, IEEE (CPMT) Components, Packaging and Manufacturing Technology Society (Pasadena, CA, USA, Sept., 1998).

Laville, Frédéric, Thomas, Marc et Beauchamp, Yves. 1998. « Réduction du bruit occasionné par les opérations d'ébarbage de pièces coulées ». Communication lors de la conférence : Colloque en santé et sécurité du travail (CSST) (Québec, QC, Canada, oct. 1998).

Laville, Frédéric, Thomas, Marc et Beauchamp, Yves. 1998. « Réduction du bruit occasionné par les opérations d'ébarbage de pièces d'aluminium coulées ». Communication lors de la conférence : 18e Congrès de l'AQHSST (Laval, QC, Canada, mai 1998).

McComber, Pierre, De Lafontaine, Jean, Druez, J., Laflamme, J. N. et Paradis, A.. 1998. « A comparison between neural network and multiple regression to develop a transmission line icing model ». Communication lors de la conférence : 55th Eastern Snow Conference (Jackson, NH, USA, June, 1998).

McComber, Pierre, De Lafontaine, Jean, Laflamme, J. N., Druez, J. et Paradis, A.. 1998. « A neural network system to estimate transmission line icing ». Communication lors de la conférence : International Workshop on Atmospheric Icing of Structures (IWAIS '98) (Reykjavik, Iceland, June, 1998).

Soulaïmani, Azzeddine. 1998. « Finite elements for fluids ». Communication lors de la conférence : Séminaire - Aerospace Engineering de l'Université of Colorado (Boulder, CO, USA, Apr., 1998).

Rapport technique

Beauchamp, Yves et Ngô, Anh Dung. 1998. « Sécurité dans l'utilisation des tracteurs agricoles au Québec : caractéristiques et conditions d'utilisation ». Coll. « Études et Recherches », vol. R-175. IRSST. 45 p.

Carrière, Jean-Bernard, Beauchamp, Yves et Dionne-Proulx, Jacqueline. 1998. « Impact des nouvelles technologies comme moyen stratégique de prévention des accidents de travail ». Coll. « Études et Recherches », vol. R-205. IRSST. 40 p.

Laville, Frédéric, Thomas, Marc et Beauchamp, Yves. 1998. « Réduction du bruit occasionné par les opérations d'ébarbage de pièces d'aluminium coulées ». Coll. « Études et Recherches », vol. R-177. IRSST. 33 p.

Ngô, Anh Dung, Beauchamp, Yves et Le-Huy, Phieu. 1998. « La sécurité dans l'utilisation de machines dangereuses : les presses plieuses dans le secteur de la fabrication d'équipement de transport et de machines ». Coll. « Études et Recherches », vol. R-206. IRSST. 106 p.

Cette liste a été générée le Thu Mar 28 01:48:58 2024 EDT.