| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
L'affiliation est "Génie mécanique"Nombre de documents archivés : 378.
Abed, Asma, Bouzidane, Ahmed, Thomas, Marc et Zahloul, Hamou.
2017.
« Performance characteristics of a three-pad hydrostatic squeeze film damper compensated with new electrorheological valve restrictors ».
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 231, nº 7.
pp. 889-899.
Abid, A., Pereira, D., Fernandes, J. C. et Belanger, P..
2017.
« Sensitivity study of ultrasonic guided waves to cortical bone mechanical properties with axial and circumferential propagation ».
Acta Acustica united with Acustica, vol. 103, nº 3.
pp. 421-429.
Aboshighiba, Hicham, Bouzidane, Ahmed, Thomas, Marc, Ghezali, Faiza, Nemchi, Amina et Abed, Asmaa.
2017.
« Pressure distribution in orifice-compensated turbulent hydrostatic bearing with fluid inertia effects using numerical simulations via Navier-Stokes ».
Tribology - Materials, Surfaces and Interfaces, vol. 11, nº 1.
pp. 19-29.
Adewusi, Surajdeen et Thomas, Marc.
2017.
« Stress and strain distributions in the human hand-arm system using finite element analysis ».
International Journal of Engineering and Technology (UAE), vol. 6, nº 2.
pp. 21-28. Adoungotchodo, Atma, Yasaman, Alinejad, Grant, Michael, Epure, Laura, Antoniou, John, Lerouge, Sophie et Mwale, Fackson. 2017. « Evaluation of novel chitosan scaffolds encapsulating intervertebral disc cells with enhanced mechanical properties for nucleus pulposus supplementation ». Affiche numéro 66 présentée lors de la conférence : ORS PSRS 4th International Spine Research Symposium (Lake Harmony, PA, USA, Oct. 23-27, 2017).
Ahmadabadi, Zahra Nili, Laville, Frédéric et Guilbault, Raynald.
2017.
« An empirical prediction law for quasi-static nail-particle board penetration resistance ».
In International Mechanical Engineering Congress and Exposition (IMECE 2017) (Tampa, FL, USA, Nov. 03-09, 2017)
Coll. « ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) »
ASME.
American Society of Mechanical Engineers (ASME).
Ahmid, Ali, Le, Van N. et Dao, Thien M..
2017.
« An optimization procedure for overhead gantry crane exposed to buckling and yield criteria ».
International Journal of Technology and Engineering, vol. 8, nº 2.
p. 11.
Ahmid, Ali, Le, Van Ngan et Dao, Thien My.
2017.
« Optimization procedure for an I-beam crane subjected to yield and buckling criteria ».
In 2017 World Congress on Advances in Structural Engineering and Mechanics (ASEM17) : proceedings (Seoul, Korea, 28 Aug. - 01 Sept., 2017)
IASSEM Conferences.
Aidibe, Ali, Nejad, Mojtaba Kamali, Tahan, Antoine, Jahazi, Mohammad et Cloutier, Sylvain G..
2017.
« Surface characterization of die inserts used for LED lamp plastic lenses ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12.
pp. 3395-3403. Aissaoui, Rachid. 2017. « Inertial measurement unit in human movement and rehabilitation science ». Communication lors de la conférence : 32e Congrès de la Société Française de Médecine Physique et de Réadaptation (Nancy, France, 5-7 octobre 2017). Al Sayed, Chady, Vinches, Ludwig et Hallé, Stéphane. 2017. « Designing a prototype of an evaporative cooling garment apt for deep mine activities ». Communication lors de la conférence : First International Scientific Conference and Workshop on Occupational Health and Safety in Formal and Informal Mining (Odense, Denmark, Aug. 22-25, 2017).
Al Sayed, Chady, Vinches, Ludwig et Hallé, Stéphane.
2017.
« Validation of a wearable biometric system’s ability to monitor heart rate in two different climate conditions under variable physical activities ».
E-Health Telecommunication Systems and Networks, vol. 6, nº 2.
pp. 19-30. Alinejad, Y., Grant, M. P., Epure, L. M., Mwale, F. et Lerouge, S.. 2017. « Evaluation of novel chitosan scaffolds encapsulating intervertebral disc cells with enhanced mechanical properties for nucleus pulposus supplementation ». Affiche présentée lors de la conférence : 2017 Till & McCullogh Meetings (TMM2017) (Mont-Tremblant, QC, Canada, Nov. 06-08, 2017).
Anderson, M., Thielin, A. L., Bridier, F., Bocher, P. et Savoie, J..
2017.
« δ Phase precipitation in Inconel 718 and associated mechanical properties ».
Materials Science and Engineering: A, vol. 679.
pp. 48-55.
Aranas, Clodualdo, Foul, Anes, Guo, Baoqi, Fall, Ameth, Jahazi, Mohammad et Jonas, John J..
2017.
« Determination of the critical stress for the initiation of dynamic transformation in commercially pure titanium ».
Scripta Materialia, vol. 133.
pp. 83-85.
Arfaoui, M. A., Dolez, P. I., Dubé, M. et David, É..
2017.
« Development and characterization of a hydrophobic treatment for jute fibres based on zinc oxide nanoparticles and a fatty acid ».
Applied Surface Science, vol. 397.
pp. 19-29.
Aweimer, Ali Salah Omar, Bouzid, Abdel-Hakim et Kazeminia, Mehdi.
2017.
« Leak rates of gasses through packing seals with different analytical approaches ».
In ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017)
American Society of Mechanical Engineers (ASME). Azizi, S., Ouellet-Plamondon, C., David, É. et Fréchette, M.. 2017. « Electrical, thermal and mechanical properties of LDPE composite including graphene-like and carbon black additives ». Affiche numéro P034 présentée lors de la conférence : Surface Canada 2017 (Montréal, QC, Canada, May 9-12, 2017).
Azizi, S., Ouellet-Plamondon, C., David, E. et Fréchette, M. F..
2017.
« Electrical and thermal properties of low-density polyethylene/graphene-like composite ».
In IEEE Conference on Electrical Insulation and Dielectric Phenomenon (CEIDP) (Fort Worth, TX, USA, Oct. 22-25, 2017)
pp. 517-520.
Piscataway, NJ, USA : IEEE. Azzaz, Mohamed Cherif, Demarquette, N. R. et Zednik, R. J.. 2017. « Synthesis and characterization of PVDF Nanofibers ». Communication lors de la conférence : 33rd Annual Meeting of the Polymer Processing Society (Cancun, Mexico, Dec. 10-14, 2017).
Bag, Amrita, Delbergue, Dorian, Lévesque, Martin, Bocher, Philippe et Brochu, Myriam.
2017.
« Study of short crack growth in shot peened 300M steel ».
In 13th International Conference on Shot Peening: ICSP13: Proceedings (Montréal, QC, Canada, 18-21 sept. 2017)
pp. 230-235.
Barzani, Mohsen Marani, Farahany, Saeed et Songmene, Victor.
2017.
« Machinability characteristics, thermal and mechanical properties of Al-Mg2Si in-situ composite with bismuth ».
Measurement: Journal of the International Measurement Confederation, vol. 110.
pp. 263-274.
Beauregard, Yvan, Polotski, Vladimir, Bhuiyan, Nadia et Thomson, Vincent.
2017.
« Optimal utilisation level for lean product development in a multitasking context ».
International Journal of Production Research, vol. 55, nº 3.
pp. 795-818.
Belzile, Patrick, Comeau, Félix-Antoine, Raymond, Jasmin, Lamarche, Louis et Carreau, Michel.
2017.
« Arctic climate horizontal ground-coupled heat pump ».
Geothermal Resources Council Transactions, vol. 41.
pp. 1958-1978. Benacchio, Simon, Varoquaux, Arthur, Le Troter, Arnaud, Wagnac, Eric, Doutres, Olivier, Bendahan, David, Callot, Virginie et Sgard, Franck C.. 2017. « MRI investigation of the ear canal deformation due to earplugs: A first step toward understanding wearing comfort ». Communication lors de la conférence : 3rd Joint Meeting of the Acoustical Society of America and the European Acoustics Association (Boston, MA, USA, June 25-29, 2017).
Benhamed, S., Ibrahim, H., Belmoktar, K., Hosni, H., Ilinca, A., Rousse, D. R., Chandra, A. et Ramdenee, D..
2017.
« Modélisation dynamique d'un générateur diesel ».
In XIIIeme Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (CIFQ) (Saint-Lô, France, 22-23 mai 2017)
BenHamed, S., Ibrahim, H., Ilinca, A., Rousse, D., Chandra, A. et Ramdenee, D..
2017.
« Simulateur dynamique d’un générateur hybride éolien-diesel avec stockage par air comprimé ».
In XIIIeme Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (Saint-Lô, France, 22-24 mai 2017)
Benrachi, Naoufel, Smaili, Arezki, Lamarche, Louis et Ouzzane, Mohamed.
2017.
« Numerical analysis of a new configuration of ground-air heat exchanger ».
In International Renewable and Sustainable Energy Conference (IRSEC) (Tangier, Morocco, Dec. 04-07, 2017)
Piscataway, NJ, USA : IEEE.
Bernard, H. et Rousse, D. R..
2017.
« Réduction des émissions de GES et de la consommation d'énergie des spectacles itinérants du Cirque du Soleil ».
In XIIIeme Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (CIFQ) (Saint-Lô, France, 22-23 mai 2017)
Berrima, Safa, Blaquière, Yves et Savaria, Yvon.
2017.
« A multi-measurements RO-TDC implemented in a Xilinx field programmable gate array ».
In 2017 IEEE International Symposium on Circuits and Systems (ISCAS) (Baltimore, MD, USA, May 28-31, 2017)
Piscataway, NJ, USA : IEEE. Bertrand, R., Texier, D., Robe, H., Zedan, Y., Feulvarch, E. et Bocher, P.. 2017. « Heterogeneous mechanical behavior of dissimilar FSWed joints assessed by OHR-DIC characterizations ». Communication lors de la conférence : 5th International Conference on Scientific and Technical Advances on Friction Stir Welding & Processing (Metz, France, Oct. 11-13, 2017).
Bertrand-Grenier, Antony, Lerouge, Sophie, Tang, An, Salloum, Eli, Therasse, Eric, Kauffmann, Claude, Héon, Hélène, Salazkin, Igor, Cloutier, Guy et Soulez, Gilles.
2017.
« Abdominal aortic aneurysm follow-up by shear wave elasticity imaging after endovascular repair in a canine model ».
European Radiology, vol. 27, nº 5.
pp. 2161-2169.
Bianco, Rohan-Jean, Arnoux, Pierre Jean, Wagnac, Éric, Mac-Thiong, Jean-Marc et Aubin, Carl-Éric.
2017.
« Minimizing pedicle screw pullout risks: a detailed biomechanical analysis of screw design and placement ».
Journal of Spinal Disorders and Techniques, vol. 30, nº 3.
E226-E232. Boaretto, Y., Sergent, A., Li, M., Rouleau, D. M. et Petit, Y.. 2017. « Analyse géométrique des fractures de type split de la grande tubérosité ». Communication lors de la conférence : 37e Journée de la Recherche du POES et de la division d'orthopédie de l'Université de Montréal (Montréal, QC, Canada, 18 mai 2017).
Boespflug, Gaël, Maire, Marion, De Crescenzo, Gregory, Lerouge, Sophie et Wertheimer, Michael R..
2017.
« Characterization and comparison of N-, O-, and N+O-functionalized polymer surfaces for efficient (HUVEC) endothelial cell colonization ».
Plasma Processes and Polymers, vol. 14, nº 7.
Boivin, Guillaume, Bélanger, Pierre et Zednik, Ricardo J..
2017.
« Torsional piezoelectric strain in monocrystalline paratellurite ».
In International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016)
Coll. « Materials Science Forum », vol. 879.
pp. 637-641.
Trans Tech Publications.
Bonakdar, Ali, Molavi-Zarandi, Marjan, Chamanfar, Ahmad, Jahazi, Mohammad, Firoozrai, Arash et Morin, Eric.
2017.
« Finite element modeling of the electron beam welding of Inconel-713LC gas turbine blades ».
Journal of Manufacturing Processes, vol. 26.
pp. 339-354. Bonfiglio, P., Pompoli, F., Horoshenkov, K. V., Rahim, M. I. B. S. A., Jaouen, L., Rodenas, J., Bécot, F.-X., Gourdon, E., Jaeger, D., Kursh, V., Tarello, M., Roozen, N. B., Glorieux, C., Ferrian, F., Leroy, P., Berger, S., Briatico Vangosa, F., Dauchez, N., Foucart, F., Lei, L., Carillo, K., Sgard, F., Doutres, O., Panneton, R., Verdiere, K., Bertolini, C., Bär, R., Groby, J.-P., Geslain, A., Poulain, N., Rouleau, L., Guinault, A., Ahmadi, H. et Forge, C.. 2017. « Round Robin test on elastic properties of poro- and viscoelastic materials for vibro-acoustic applications ». Communication lors de la conférence : 5th Symposium on the Acoustics of Poro-Elastic Materials (SAPEM) (Le Mans, France, Dec. 06-08, 2017).
Bonnet, Fabien, Voix, Jérémie et Nelisse, Hugues.
2017.
« Loudness in the occluded ear canal: Are we again missing 6 dB? ».
[Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 45, nº 3.
pp. 136-137.
Bonzel, Pierre et Beauregard, Yvan.
2017.
« Identification of risk factors and influences on aeronautical product development performance ».
In 38th International Annual Conference of the American Society for Engineering Management (ASEM 2017) (Huntsville, AL, USA, Oct. 18-21, 2017)
pp. 644-653.
ASEM. Bouchet, M., Maire, M., Gauthier, M., Ajji, A. et Lerouge, S.. 2017. « Electrospun polycaprolactone/polyurethane tubular structures for complian small-diameter vascular grafts ». Affiche présentée lors de la conférence : 19ème Congrès des Étudiants, Stagiaires et Résidents du Centre de Recherche du CHUM (Montréal, QC, Canada, 04 mai 2017). Bouchet, M., Maire, M., Gauthier, M., Ajji, A. et Lerouge, S.. 2017. « Electrospun polycaprolactone/polyurethane tubular structures for compliant small-diameter vascular grafts ». Affiche présentée lors de la conférence : Expo Hightex 2017 (Montréal, QC, Canada, 04-05 avril 2017). Bouchet, Mélusine, Maire, M., Gauthier, M., Ajji, A. et Lerouge, Sophie. 2017. « Electrospun polycaprolactone/polyurethane tubular structures for compliant smalldiameter vascular grafts ». Affiche numéro 114102 présentée lors de la conférence : 33rd Annual Meeting of the Canadian Biomaterials Society (CBS) (Winnipeg, MB, Canada, May 24-27, 2017).
Bouhelal, Abedelhamid, Smaili, Arezki, Guerri, Ouahiba et Masson, Christian.
2017.
« Comparison of BEM and full Navier-Stokes CFD methods for prediction of aerodynamics performance of HAWT rotors ».
In 2017 International Renewable and Sustainable Energy Conference (IRSEC) (Tangier, Morocco, Dec. 04-07, 2017)
Piscataway, NJ, USA : IEEE. Bouissa, Yassine, Champliaud, Henri, Jahazi, Mohammad, Lapierre-Boire, Louis-Philippe, Morin, Jean-Benoît et Poulain, Nicolas. 2017. « Modeling heterogeneities effects on phase transformation during quenching of large size forged steel ingots ». Communication lors de la conférence : 14th U.S. National Congress on Computational Mechanics (USNCCM) (Montreal, QC, Canada, July 17-20, 2017). Boukani, H. H., Mohseni, E. et Viens, M.. 2017. « Effect of fatigue crack orientation on the sensitivity of eddy current inspection in martensitic stainless steels ». Communication lors de la conférence : NDT in Canada 2017 (Québec, QC, Canada, June 06-08, 2017).
Bouserhal, Rachel E., Bockstael, Annelies, MacDonald, Ewen, Falk, Tiago H. et Voix, Jérémie.
2017.
« Modeling speech level as a function of background noise level and talker-to-listener distance for talkers wearing hearing protection devices ».
Journal of Speech, Language, and Hearing Research, vol. 60, nº 12.
pp. 3393-3403.
Bouserhal, Rachel E., Falk, Tiago H. et Voix, Jérémie.
2017.
« In-ear microphone speech quality enhancement via adaptive filtering and artificial bandwidth extension ».
Journal of the Acoustical Society of America, vol. 141, nº 3.
pp. 1321-1331. Bouserhal, Rachel, Falk, Tiago H. et Voix, Jérémie. 2017. « Speech quality enhancement of in-ear microphone ». Affiche présentée lors de la conférence : Erasmus Mundus Auditory Cognitive Neuroscience Symposium 2017 (Leipzig, Germany, Apr. 27-29, 2017).
Bouzid, Abdel-Hakim et Aweimer, Ali Salah Omar.
2017.
« On the use of gas flow models to predict leak rates through sheet gasket materials ».
In ASME 2017 International Mechanical Engineering Congress and Exposition (Tampa Bay, Fl, USA, Nov. 03-09, 2017)
ASME.
Brailovski, Vladimir, Terriault, Patrick, Simoneau, Charles, Dumas, Mathieu et Jetté, Bruno.
2017.
« Development of a biomimetic metallic femoral stem: Methodological approach ».
In International conference on processing and manufacturing of advanced materials (THERMEC) (Graz, Austria, May 29-June 03, 2016)
Coll. « Materials Science Forum », vol. 879.
pp. 1788-1793.
Trans Tech Publications.
Brummund, Martin, Brailovski, Vladimir, Petit, Yvan, Facchinello, Yann et Mac-Thiong, Jean-Marc.
2017.
« Impact of anchor type on porcine lumbar biomechanics: Finite element modelling and in-vitro validation ».
Clinical Biomechanics, vol. 43.
pp. 86-94.
Brummund, Martin, Brailovski, Vladimir, Petit, Yvan, Facchinello, Yann et Mac-Thiong, Jean-Marc.
2017.
« Impact of spinal rod stiffness on porcine lumbar biomechanics: Finite element model validation and parametric study ».
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol. 231, nº 12.
pp. 1071-1080.
Cambron, Philippe, Masson, Christian, Tahan, Antoine, Torres, David et Pelletier, Francis.
2017.
« Comparison of power curve monitoring methods ».
In International Conference on Advances in Energy Systems and Environmental Engineering (ASEE 2017) (Wroclaw, Poland, July 02-05, 2017)
Coll. « E3S Web of Conferences », vol. 22.
EDP Sciences.
Cambron, Philippe, Tahan, Antoine, Masson, Christian et Pelletier, Francis.
2017.
« Bearing temperature monitoring of a Wind Turbine using physics-based model ».
Journal of Quality in Maintenance Engineering, vol. 23, nº 4.
pp. 479-488. Carillo, K., Doutres, O. et Sgard, F.. 2017. « Simulation numérique de l'atténuation sonore d'un projecteur auditif de type casque anti-bruit ». Affiche présentée lors de la conférence : 39e Congrès de l'Association Québécoise pour l'Hygiène, la Santé et la Sécurité du Travail (AQHSST) (Victoriaville, QC, Canada, 16-18 mai 2017). Carillo, Kévin, Sgard, Franck C. et Doutres, Olivier. 2017. « Numerical prediction of the broadband sound attenuation of a commercial earmuff: Impact of the cushion modeling ». Affiche présentée lors de la conférence : 3rd Joint Meeting of the Acoustical Society of America and the European Acoustics Association (Boston, MA, USA, June 25-29, 2017).
Castellon, J., Yahyaoui, H., Guille, O., David, E., Guo, M. et Fréchette, M..
2017.
« Dielectric properties of POSS/LDPE and MgO/LDPE nanocomposites compounded by different techniques ».
In IEEE Conference on Electrical Insulation and Dielectric Phenomenon (CEIDP) (Fort Worth, TX, USA, Oct. 22-25, 2017)
pp. 457-460.
Piscataway, NJ, USA : IEEE.
Castro Moreno, A., Tu, F., Lévesque, M. et Bocher, P..
2017.
« Shot peening FEM simulation: A novel approach based on crystal plasticity ».
In 13th International Conference on Shot Peening: ICSP13: Proceedings (Montréal, QC, Canada, 18-21 sept. 2017)
pp. 260-265.
Ceccaldi, Caroline, Assaad, Elias, Hui, Eve, Buccionyte, Medeine, Adoungotchodo, Atma et Lerouge, Sophie.
2017.
« Optimization of injectable thermosensitive scaffolds with enhanced mechanical properties for cell therapy ».
Macromolecular Bioscience, vol. 17, nº 6.
Ceccaldi, Caroline, Strandman, Satu, Hui, Eve, Montagnon, Emmanuel, Schmitt, Cédric, Hadj Henni, Anis et Lerouge, Sophie.
2017.
« Validation and application of a nondestructive and contactless method for rheological evaluation of biomaterials ».
Journal of Biomedical Materials Research - Part B Applied Biomaterials, vol. 105, nº 8.
pp. 2565-2573.
Chabour, H., Rousse, D. R., Ibrahim, H., Ilinca, A. et Chandra, A..
2017.
« Analyse des stratégies d'opération d'une centrale énergétique Éolienne-Diesel-Air comprimé ».
In XIIIeme Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (CIFQ) (Saint-Lô, France, 22-23 mai 2017)
Chadha, K., Shahriari, D., Tremblay, R., Bhattacharjee, P. P. et Jahazi, M..
2017.
« Deformation and recrystallization behavior of the cast structure in large size, high strength steel ingots: Experimentation and modeling ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 48, nº 9.
pp. 4297-4313.
Chadha, Kanwal, Shahriari, Davood et Jahazi, Mohammad.
2017.
« An approach to develop hansel-spittel constitutive equation during ingot breakdown operation of low alloy steels ».
In Frontiers in Materials Processing, Applications, Research and Technology : Select Proceedings of FiMPART 2015 (Hyderabad, India, June 12-15, 2015)
pp. 239-246.
Springer.
Chamanfar, Ahmad, Monajati, Hossein, Rosenbaum, Alex, Jahazi, Mohammad, Bonakdar, Ali et Morin, Eric.
2017.
« Microstructure and mechanical properties of surface and subsurface layers in broached and shot-peened Inconel-718 gas turbine disc fir-trees ».
Materials Characterization, vol. 132.
pp. 53-68.
Chen, Jianqiang, Demers, Vincent, Cadotte, Eve-Line, Turner, Daniel et Bocher, Philippe.
2017.
« Structural performance of inconel 625 superalloy brazed joints ».
Journal of Materials Engineering and Performance, vol. 26, nº 2.
pp. 547-553.
Chentouf, S. M., Belhadj, T., Bombardier, N., Brodusch, N., Gauvin, R. et Jahazi, M..
2017.
« Influence of predeformation on microstructure evolution of superplastically formed Al 5083 alloy ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12.
pp. 2929-2937.
Comot, P., Bocher, P. et Belanger, P..
2017.
« Ultrasonic guided wave inspection of Inconel 625 brazed lap joints: Simulation and experimentation ».
NDT and E International, vol. 91.
pp. 71-78.
Coulombe, F. et Rousse, D. R..
2017.
« Mesures et prédictions thermo-fluides dans un bâtiment avicole ».
In XIIIeme Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (CIFQ) (Saint-Lô, France, 22-23 mai 2017)
Coutu, S., Nadeau, S. et Ateme-Nguema, B.. 2017. « Implantation d’un département de maintenance intégrant Lean et santé et sécurité du travail ». Affiche présentée lors de la conférence : Congrès annuel AQHSST (Victoriaville, QC, Canada, 16-18 mai 2017). Couture, C., Germerie, E., Debia, M., Neesham-Grenon, E., Njanga, P., Hallé, S., Lachapelle, G., Couture, F., Coulombe, H. et Aubin, S.. 2017. « Qualité de l’air dans les mines souterraines : Évaluation des expositions aux émanations de moteur diesel ». Communication lors de la conférence : 12e Colloque en hygiène du travail de Montréal (Montréal, QC, Canada, 30 mars 2017). Cretot-Richert, Gabrielle, Debener, Stefan, De Voos, Marteen, Bleichner, Martin et Voix, Jérémie. 2017. « Closing the efferent auditory loop: audio and EEG-Recording wearable device for cognitive load measurements ». Affiche présentée lors de la conférence : 9th Speech in Noise Workshop (SPIN) (Oldenburg, Germany, Jan. 5-6, 2017).
Curtat, Jean-Loup, Lanteigne, Jacques, Champliaud, Henri, Liu, Zhaoheng et Lévesque, Jean-Benoît.
2017.
« Influence of hammer peening on fatigue life of E309L steel used for 13%Cr-4%Ni blade runner repairs ».
International Journal of Fatigue, vol. 100.
pp. 68-77. Dahmani, J., Petit, Y., Laporte, C., Pageau, K., Brown, M., Séguin, M. et Kuznetsov, L.. 2017. « Model-based correction of ultrasound image deformations due to probe pressure : towards experimental validation ». Communication lors de la conférence : 3rd IEEE Research Boost "Give your research an industrial edge" (Montreal, QC, Canada, Nov. 02, 2017).
Dahmani, Jawad, Petit, Yvan et Laporte, Catherine.
2017.
« Model-based correction of ultrasound image deformations due to probe pressure ».
In Medical Imaging 2017: Image Processing (Orlando, FL, USA, Feb. 11-16, 2017)
Coll. « Proceedings of SPIE », vol. 10133.
SPIE.
Daoud, M., Chatelain, J. F. et Bouzid, A..
2017.
« Effect of rake angle-based Johnson-Cook material constants on the prediction of residual stresses and temperatures induced in Al2024-T3 machining ».
International Journal of Mechanical Sciences, vol. 122.
pp. 392-404. Darveau, J., Gosselin, S., Lagrandeur, A., Nadeau, S., Hallé, S. et Boudreau-Trudel, B.. 2017. « Étude et conception primaire des tableaux de bord de boulonneuses et foreuses ». Communication lors de la conférence : Le colloque APSM (Malartic, Abitibi, 15 mars 2017).
David, E., Castellon, J., Fréchette, M., Guo, M. et Helal, E..
2017.
« Dielectric properties of various metallic Oxide/LDPE nanocomposites compounded by different techniques ».
In IEEE Electrical Insulation Conference (EIC) (Baltimore, MD, USA, June 11-14, 2017)
pp. 151-154.
Piscataway, NJ, USA : IEEE.
David, E., Stone, G. C. et Sasic, M..
2017.
« Dielectric response of machine insulation extracted from DC ramp test on individual stator bars ».
In 35th IEEE Electrical Insulation Conference (EIC) (Baltimore, MD, USA, June 11-14, 2017)
pp. 46-49.
IEEE.
David, Eric, Fréchette, Michel, Rosi, Gian Filippo et Moghimian, Nima.
2017.
« Hysteresis effect in the electrical conductivity of graphene-enhanced polyethylene composites ».
In IEEE 17th International Conference on Nanotechnology (IEEE-NANO) (Pittsburgh, PA, USA, July 25-28, 2017)
pp. 280-283.
Piscataway, NJ, USA : IEEE.
Dbibi, R., Ibrahim, H., Ilinca, A., Rousse, D., Chandra, A. et Ramdenee, D..
2017.
« Développement d’un système de supervision, d’acquisition et de transfert de données d’un système de production électrique hybride ».
In XIIIeme Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (Saint-Lô, France, 22-24 mai 2017)
de Brito Siqueira Tagawa, Gitsuzo, Beccardi, Thomas, Samieri, Valerio et Morency, François.
2017.
« RANS prediction of aerodynamic performance at near-stall-angle conditions ».
In 63rd Aeronautics Conference : AERO2017 Proceedings (Toronto, ON, Canada, May 16-18, 2017)
Canadian Aeronautics and Space Institute.
de Castilla, Hector, Bélanger, Pierre et Zednik, Ricardo J..
2017.
« Dynamic piezoelectric behavior of lithium niobate at high temperature ».
In International Conference oN Processing and Manufacturing Of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016)
Coll. « Materials Science Forum », vol. 879.
pp. 408-412.
Trans Tech Publications.
de Castilla, Hector, Bélanger, Pierre et Zednik, Ricardo J..
2017.
« High temperature characterization of piezoelectric lithium niobate using electrochemical impedance spectroscopy resonance method ».
Journal of Applied Physics, vol. 122, nº 24.
Debia, Maximilien, Couture, Caroline, Njanga, Pierre-Eric, Neesham-Grenon, Eve, Lachapelle, Guillaume, Coulombe, Hugo, Hallé, Stéphane et Aubin, Simon.
2017.
« Diesel engine exhaust exposures in two underground mines ».
International Journal of Mining Science and Technology, vol. 27, nº 4.
pp. 641-645.
Debibi, R., Ibrahim, H., Belmokhtar, K., Ilinca, A., Rousse, D. R., Chandra, A., Ramdenee, D. et Ben Arfi, A..
2017.
« Analyse du comportement d'un micro-réseau par contrôle et acquisition de données : validation expérimentale ».
In XIIIeme Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (CIFQ) (Saint-Lô, France, 22-23 mai 2017)
Delahaigue, J., Chatelain, J. F. et Lebrun, G..
2017.
« Machining analysis of unidirectional and bi-directional flax-epoxy composite laminates ».
[Article de conférence]. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 231, nº 1-2.
pp. 196-209.
Delahaigue, Jérémy, Chatelain, Jean-Francois et Lebrun, Gilbert.
2017.
« Influence of cutting temperature on the tensile strength of a carbon fiber-reinforced polymer ».
Fibers, vol. 5, nº 4.
Delbergue, D., Lévesque, M. et Bocher, P..
2017.
« About the importance of X-ray elastic constant determination in the precise measurement of residual stress profiles ».
In 13th International Conference on Shot Peening: ICSP13: Proceedings (Montréal, QC, Canada, 18-21 sept. 2017)
pp. 236-242.
Delbergue, D., Texier, D., Lévesque, M. et Bocher, P..
2017.
« Comparison of two X-Ray residual stress measurement methods: Sin2 ψ and Cos α, through the determination of a martensitic steel X-Ray elastic constant ».
In International Conference on Residual Stresses 2016 ICRS-10
Coll. « Materials Research Proceedings »
pp. 55-60.
Millersville : Materials Research Forum LLC.
Deluy, Marc-Claudel, Ngo, Anh Dung, Dubé, Martine et Ganesan, Rajamohan.
2017.
« Influences of frequency and temperature on the fatigue behavior of plain-weave carbon/epoxy composite material with flaw subjected to partially-reversed cyclic loading ».
In 21st International Conference on Composite Materials (Xi'an, China, Aug. 20-25, 2017)
International Committee on Composite Materials.
Demarquette, Nicole R. et Carastan, Danilo J..
2017.
« Rheological behavior of nanocomposites ».
In
Nanocomposites Materials : Synthesis, Properties and Applications.
pp. 233-264. CRC Press.
Demers, Sébastien, Nadeau, Sylvie et Bouzid, Abdel-Hakim.
2017.
« Analytical evaluation of stresses and displacements of an intervertebral disc ».
Journal of Biomechanical Science and Engineering, vol. 12, nº 3.
Demers, V., Elmajdoubi, M. M. et Bocher, P..
2017.
« Moldability of low-pressure powder injection molding feedstocks ».
In Advances in Powder Metallurgy & Particulate Materials 2017 : Conference Proceedings (Las Vegas , NV, USA, June 13-16, 2017)
pp. 401-414.
Metal Powder Industries Federation.
Diop, I., Nadeau, S. et Emami-Mehrgani, B..
2017.
« Human error, optimal production control policies and corrective maintenance with lockout-tagout ».
In Applied Human Factors and Ergonomics Conferrence (AHFE) (Los Angeles, CA, USA, July 17-21, 2017)
Dolez, Patricia I., Arfaoui, Mohamed A., Dubé, Martine et David, Éric.
2017.
« Hydrophobic treatments for natural fibers based on metal oxide nanoparticles and fatty acids ».
In 3rd International Conference on Natural Fibers: Advanced Materials for a Greener World (ICNF) (Braga, Portugal, June 21-23, 2017)
Coll. « Procedia Engineering », vol. 200.
pp. 81-88.
Netherlands : Elsevier B.V..
Dolez, Patricia I., Weltrowski, Marek et David, Eric.
2017.
« Study of the parameters controlling nanoparticle dispersion for nanocomposite geomembrane applications ».
In Geotechnical Frontiers 2017: Waste Containment, Barriers, Remediation, and Sustainable Geoengineering (Orlando, FL, USA, Mar. 12-15, 2017)
pp. 107-116.
American Society of Civil Engineers.
Dorval, Jonathan, Masson, Christian et Gagnon, Yves.
2017.
« On the improvement of wind power predictions based on terrain characteristics and measurements of the annual energy production ».
Journal of Flow Control, Measurement & Visualization, vol. 5, nº 1.
Doutres, Olivier, Sgard, Franck C. et Terroir, Jonathan. 2017. « A review about hearing protection comfort and its evaluation ». Communication lors de la conférence : 3rd Joint Meeting of the Acoustical Society of America and the European Acoustics Association (Boston, MA, USA, June 25-29, 2017).
Dumas, Mathieu, Terriault, Patrick et Brailovski, Vladimir.
2017.
« Modelling and characterization of a porosity graded lattice structure for additively manufactured biomaterials ».
Materials and Design, vol. 121.
pp. 383-392.
Dupont-Marillia, Frederic, Jahazi, Mohammad, Lafreniere, Serge et Bélanger, Pierre.
2017.
« Influence of local mechanical properties of high strength steel from large size forged ingot on ultrasonic wave velocities ».
In 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation (Atlanta, GA, USA, July 17-22, 2016)
Coll. « AIP Conference Proceedings », vol. 1806.
USA : American Institute of Physics.
Elgnemi, Tarek, Ahmadi, Keivan, Songmene, Victor, Nam, Jungsoo et Jun, Martin B. G..
2017.
« Effects of atomization-based cutting fluid sprays in milling of carbon fiber reinforced polymer composite ».
Journal of Manufacturing Processes, vol. 30.
pp. 133-140.
Evina, Ghislaine Etoua, Kajl, Stanislaw, Lamarche, Louis et Beltran-Galindo, Javier.
2017.
« CO2 concentration and occupancy density in the critical zones served by the VAV system ».
In International Conference on Advances in Energy Systems and Environmental Engineering (ASEE) (Wroclaw, Poland, July 02-05, 2017)
Coll. « E3S Web of Conferences », vol. 22.
EDP Science. Facchinello, Y., Wagnac, E., Ung, B., Petit, Y., Pradhan, P., Peyrache, L. M. et Mac-Thiong, J. M.. 2017. « Développement d'un substitut physique de moelle épinière instrumenté à l'aide de fibres optiques ». Communication lors de la conférence : 37e Journée de la Recherche du POES et de la division d'orthopédie de l'Université de Montréal (Montréal, QC, Canada, 18 mai 2017). Facchinello, Yann, Wagnac, Eric, Ung, Bora, Petit, Yvan, Pradhan, Prabin et Mac-Thiong, Jean-Marc. 2017. « Development of an instrumented spinal cord surrogate using embedded optical fiber: a feasibility study ». Communication lors de la conférence : American Spinal Injury Association 2017 Annual Scientific Meeting (ASIA 2017) (Albuquerque, NM, USA, Apr. 26-29, 2017).
Facchinello, Yann, Wagnac, Éric, Ung, Bora, Petit, Yvan, Pradhan, Prabin, Peyrache, Louis-Marie et Mac-Thiong, Jean-Marc.
2017.
« Development of an instrumented spinal cord surrogate using optical fibers: A feasibility study ».
Medical Engineering and Physics, vol. 48.
pp. 212-216. Facchinello, Yann, Wagnac, Éric, Ung, Bora, Petit, Yvan, Pradhan, Prabin, Peyrache, Louis-Marie et Mac-Thiong, Jean-Marc. 2017. « Développement d'un substitut physique de moelle épinière instrumenté à l'aide de fibre optique ». Communication lors de la conférence : Journée de la Recherche du Centre Intégré Universitaire de Santé et de Services Sociaux du Nord-de-l'île-de Montréal (Montréal, QC, Canada, 29 mai 2017).
Facchinello, Yann, Wagnac, Eric, Ung, Bora, Petit, Yvan, Pradhan, Prabin, Peyrache, Louis-Marie et Mac-Thiong, Jean-Marc.
2017.
« Instrumented spinal cord surrogate using optical fiber: role of the fiber's location ».
In IASTED International Conference on Biomedical Engineering (BioMed 2017) (Innsbruck, Austria, Feb. 20-21, 2017)
pp. 229-232.
ACTA Press.
Facchinello, Yann, Wagnac, Eric, Ung, Bora, Petit, Yvan, Pradhan, Prabin, Peyrache, Louis-Marie et Mac-Thiong, Jean-Marc.
2017.
« The development of a physical spinal cord surrogate with localized transverse compression sensing capabilities ».
In 3rd World Congress on Electrical Engineering and Computer Systems and Science (EECSS'17) (Rome, Italy, June 04-06, 2017)
ICBES 129-121/ICBES 129-122.
Fahsi, Adil et Soulaimani, Azzeddine.
2017.
« Numerical investigations of the XFEM for solving two-phase incompressible flows ».
International Journal of Computational Fluid Dynamics, vol. 31, nº 3.
pp. 135-155.
Fall, A., Jahazi, M., Khodabandeh, A. R. et Fesharakib, M. H..
2017.
« Effect of process parameters on microstructure and mechanical properties of friction stir-welded Ti-6Al-4V joints ».
International Journal of Advanced Manufacturing Technology, vol. 91, nº 5-8.
pp. 2919-2931.
Farahani, R. D., Seiller, R. et Dubé, M..
2017.
« Nanocomposite heating elements for induction welding of thermoplastic composites ».
In 10th Canadian-International Conference on Composites : Advanced Composites in Addressing Global Challenges of the 21st Century CANCOM2017 (Ottawa, ON, Canada, July 17-20, 2017)
Farahani, Rouhollah Dermanaki et Dubé, Martine.
2017.
« Novel heating elements for induction welding of carbon fiber/polyphenylene sulfide thermoplastic composites ».
Advanced Engineering Materials, vol. 19, nº 11.
Fareh, F., Demers, V., Demarquette, N. R., Turenne, S. et Scalzo, O..
2017.
« Influence of segregation on rheological properties of wax-based feedstocks ».
Powder Technology, vol. 320.
pp. 273-284.
Feng, Zhengkun, Champliaud, Henri et Mathieu, Louis.
2017.
« Investigations of a reconfigurable pressing setup for manufacturing blades of large francis turbines runners from very thick plates ».
In 29th European Modeling and Simulation Symposium (EMSS) (Barcelona, Spain, Sept. 18-20, 2017)
pp. 212-220.
CAL-TEK S.r.l..
Figueroa, José R., Preda, Ioana, Noël, Sophie, Soulières, Bruno, Klamt, Thomas, Koepfler, Andreas et David, Éric.
2017.
« Temperature measurement in thermal cycling of stator bars - the influence of the sensor installation technique ».
In IEEE Electrical Insulation Conference (EIC) (Baltimore, MD, USA, June 11-14, 2017)
pp. 302-308.
Piscataway, NJ, USA : IEEE.
Fokwa Soh, Mathieu, Forgues, Daniel et Doré, Sylvie.
2017.
« Integrating concepts and principles from lean thinking and the design for X to BIM ».
In Canadian Society for Civil Engineering Annual Conference and General Meeting 2017: Leadership in Sustainable Infrastructure (Vancouver, Canada, May 31 - June 03, 2017)
pp. 310-311.
Canadian Society for Civil Engineering.
Foroozmehr, Fayaz, Verreman, Yves, Chen, Jianqiang, Thibault, Denis et Bocher, Philippe.
2017.
« Effect of inclusions on fracture behavior of cast and wrought 13% Cr-4% Ni martensitic stainless steels ».
Engineering Fracture Mechanics, vol. 175.
pp. 262-278.
Fréchette, M. F., Ghafarizadeh, S. B., Ahn, T. T., Vadeboncoeur, S., Guo, M. et David, E..
2017.
« LDPE nanocomposites containing functionalized SiO2 molecular structures: Properties associated with a ball-milled preparation ».
In 1st International Conference on Electrical Materials and Power Equipment (ICEMPE) (Xi'an, China, May 14-17, 2017)
pp. 207-210.
Piscataway, NJ, USA : IEEE.
Fréchette, M. F., Ghafarizadeh, S. B., David, É. et Zribi, E..
2017.
« Dielectric properties of epoxy composites containing Si/SiO2 core/shell nanoparticles ».
In IEEE Electrical Insulation Conference (EIC) (Baltimore, MD, USA, June 11-14, 2017)
pp. 479-482.
Piscataway, NJ, USA : IEEE.
Fréchette, M., Ghafarizadeh, S. B., Anh, T. T. et David, É..
2017.
« Dielectric properties of Polyethylene/MgO nanocomposites fabricated using ball-milling ».
In IEEE 17th International Conference on Nanotechnology (IEEE-NANO) (Pittsburgh, PA, USA, July 25-28, 2017)
pp. 276-279.
Piscataway, NJ, USA : IEEE.
Fréchette, M., Ghafarizadeh, S. B., Vadeboncoeur, S., Guo, M., Pirondelli, A., Fabiani, D. et David, E..
2017.
« Polymer morphology considerations for nanodielectrics ».
In IEEE Electrical Insulation Conference (EIC) (Baltimore, MD, USA, June 11-14, 2017)
pp. 155-160.
Piscataway, NJ, USA : IEEE.
Fréchette, M., Ghafarizadeh, S. B., Vadeboncoeur, S., Zribi, E., Vanga-Bouanga, C. et David, E..
2017.
« Surface resistance to erosion for various polymer composites containing conductive nanofillers ».
In 1st International Conference on Electrical Materials and Power Equipment (ICEMPE) (Xi'an, China, May 14-17, 2017)
pp. 65-69.
IEEE.
Fréchette, Michel, Meng, Guo, David, Éric, Daomin, Min et Shengtao, Li.
2017.
« The dielectric response of polyethylene/polyhedral oligomeric silsesquioxanes composites at various temperatures ».
In IEEE Conference on Electrical Insulation and Dielectric Phenomenon (CEIDP) (Fort Worth, TX, USA, Oct. 22-25, 2017)
pp. 501-504.
Piscataway, NJ, USA : IEEE.
Fredj, Emna Ben, Nanesa, Hadi Ghasemi, Shahriari, Davood, Morin, Jean-Benoit et Jahazi, Mohammad.
2017.
« Effect of cooling rate on phase transformation and microstructure evolution in a large size forged ingot of medium carbon low alloy steel ».
In TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings (San Diego, CA, USA, Feb. 26-March 2, 2017)
Coll. « The Minerals, Metals & Materials Series »
pp. 413-423.
Springer International Publishing.
Gaudreau, Marc-André, Padois, Thomas, Laville, Frédéric et Marcotte, Pierre.
2017.
« Noise and vibration measurement of framing nailers: Development and validation of a mechanized test bench ».
In 46th International Congress and Exposition on Noise Control Engineering: Taming Noise and Moving Quiet (INTER-NOISE 2017) (Hong Kong, China, Aug. 27-30, 2017)
pp. 5382-5388.
Institute of Noise Control Engineering.
Gaudreau, Marc-André, Sgard, Franck, Laville, Frédéric et Nélisse, Hugues.
2017.
« A finite element model to improve noise reduction based attenuation measurement of earmuffs in a directional sound field ».
Applied Acoustics, vol. 119.
pp. 66-77.
Gendron, Mathieu, Hazel, Bruce, Boudreault, Eric, Champliaud, Henri et Pham, Xuan-Tan.
2017.
« Modeling circular inductors coupled to a semi-infinite magnetic medium considering the proximity effect ».
Journal of Electromagnetic Waves and Applications, vol. 31, nº 13.
pp. 1232-1254.
Genoyer, Julie, Yee, Marcio, Soulestin, Jérémie et Demarquette, Nicole.
2017.
« Compatibilization mechanism induced by organoclay in PMMA/PS blends ».
Journal of Rheology, vol. 61, nº 4.
pp. 613-626.
Ghafarizadeh, Behzad, Fréchette, Michel et David, Eric.
2017.
« Fabrication and characterization of LDPE Si/SiO2 core/shell nanocomposites ».
In International Symposium on Electrical Insulating Materials (ISEIM) (Toyohashi, Japan, Sept. 11-15, 2017)
pp. 137-140.
Piscataway, NJ, USA : IEEE.
Ghafarizadeh, Seyedbehzad, Tahvilian, Amir Masoud, Chatelain, Jean-François, Liu, Zhaoheng, Champliaud, Henri et Lebrun, Gilbert.
2017.
« Numerical simulation of ball-end milling with SPH method ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 1.
pp. 401-408.
Ghasemi-Nanesa, Hadi, Jahazi, Mohammad, Heidari, Majid et Levasseur, Tom.
2017.
« The influence of deformation-induced microvoids on mechanical failure of AISI A8-Mod martensitic tool steel ».
In 20th International ESAFORM Conference on Material Forming (ESAFORM) (Dublin, Ireland, Apr. 26-28, 2017)
Coll. « AIP Conference Proceedings », vol. 1896.
USA : American Institute of Physics.
Ghezali, Faiza, Bouzidane, Ahmed et Thomas, Marc.
2017.
« 3D Numerical investigation of pressure field of an orifice compensated hydrostatic bearing ».
Mechanics and Industry, vol. 18, nº 1.
Gholami, Mohammad S., Doutres, Olivier et Atalla, Noureddine.
2017.
« Effect of microstructure closed-pore content on the mechanical properties of flexible polyurethane foam ».
International Journal of Solids and Structures, vol. 112.
pp. 97-105.
Gholami, Mohammad S., Doutres, Olivier et Atalla, Noureddine.
2017.
« Optimization of acoustic performance of highly porous polyurethane foam using micro-structural based model ».
In INTER-NOISE and NOISE-CON Congress and Conference Proceedings (NoiseCon17) (Grand Rapids, MI, USA, June 12-14, 2017)
pp. 1030-1037.
Institute of Noise Control Engineering.
Grichi, Y., Beauregard, Y. et Dao, T. M..
2017.
« A random forest method for obsolescence forecasting ».
In IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Singapore, Singapore, Dec. 10-13, 2017)
pp. 1602-1606.
IEEE.
Grichi, Yosra, Beauregard, Yvan, Dao, Thien-My et Zaabar, Imen.
2017.
« Obsolescence forecasting strategy of technological components - A comparative study of algorithms ».
In 7th International Conference on Industrial Engineering and Systems Management (IESM 2017) (Saarbrücken, Germany, Oct. 11-13, 2017)
pp. 57-62.
Saarland University of Applied Sciences.
Gualteros-Martinez, S. et Rousse, D. R..
2017.
« Optimisation de systèmes de pompage d'eau photovoltaïques ».
In XIIIeme Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (CIFQ) (Saint-Lô, France, 22-23 mai 2017)
Günebak, S., Nadeau, S., Morency, F. et Straeter, O..
2017.
« Analysis of eye-tracking dynamics in aircraft ground deicing ».
In 63rd Aeronautics Conference (CASI-AERO) (Toronto, ON, Canada, May 16-18, 2017)
Canadian Aeronautics and Space Institute.
Guo, Meng, David, Éric, Fréchette, Michel et Demarquette, Nicole R..
2017.
« Polyethylene/polyhedral oligomeric silsesquioxanes composites: Dielectric, thermal and rheological properties ».
Polymer, vol. 115.
pp. 60-69.
Guo, Meng, Fréchette, Michel, David, Éric, Demarquette, Nicole R. et Daigle, Jean-Christophe.
2017.
« Polyethylene/polyhedral oligomeric silsesquioxanes composites: electrical insulation for high voltage power cables ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 24, nº 2.
pp. 798-807.
Haillot, D., Gibout, S., Lamalice, A., Rousse, D. R. et Py, X..
2017.
« Modélisation du comportement thermique d'une serre horticole en climat arctique ».
In XIIIeme Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (CFIQ) (Saint-Lô, France, 22-23 mai 2017)
Haillot, Didier, Pincemin, Sandrine, Goetz, Vincent, Rousse, Daniel R. et Py, Xavier.
2017.
« Synthesis and characterization of multifunctional energy composite: Solar absorber and latent heat storage material of high thermal conductivity ».
Solar Energy Materials and Solar Cells, vol. 161.
pp. 270-277.
Harris, Nathan, Shahriari, Davood et Jahazi, Mohammad.
2017.
« Development of a fast converging material specific void closure model during ingot forging ».
Journal of Manufacturing Processes, vol. 26.
pp. 131-141.
Helal, E., Amurin, L. G., Carastan, D. J., de Sousa Jr, R. R., David, E., Fréchette, M. et Demarquette, N. R..
2017.
« Interfacial molecular dynamics of styrenic block copolymer-based nanocomposites with controlled spatial distribution ».
Polymer, vol. 113.
pp. 9-26.
Helal, Emna, David, Eric, Fréchette, Michel et Demarquette, Nicole R..
2017.
« Thermoplastic elastomer nanocomposites with controlled nanoparticles dispersion for HV insulation systems: Correlation between rheological, thermal, electrical and dielectric properties ».
European Polymer Journal, vol. 94.
pp. 68-86. Hernández, Pedro Gálvez, Lafarga, Xavier Aguilo, Vanderesse, Nicolas, Quevedo González, Fernando, Bocher, Philippe et Nuño, Natalia. 2017. « Analysis of porous TI-6AL-4V structures made by selective laser sintering for intervertebral cages ». Communication lors de la conférence : 23rd Congress of the European Society of Biomechanics (Sevilla, Spain, July 02-05, 2017).
Hesamodin Talebi, S., Ghasemi-Nanesa, Hadi, Jahazi, Mohammad et Melkonyan, Haikouhi.
2017.
« In situ study of phase transformations during non-isothermal tempering of bainitic and martensitic microstructures ».
Metals, vol. 7, nº 9.
Hfeda, Marwan, Marchand, Françoise et Dao, Thien-My.
2017.
« Optimization of milk-run delivery issue in lean supply chain management by genetic algorithm and hybridization of genetic algorithm with ant colony optimization: An automobile industry case study ».
Journal of Management and Engineering Integration, vol. 10, nº 2.
pp. 90-99.
Hospital, A. et Lemaire, R..
2017.
« Simultaneous detection and partition between soot and PAHs in a laminar flame of methane by Single-Excitation Wavelength TIme-REsolved Laser-Induced Incandescence and Fluorescence (SEW-TIRE-LII/LIF) ».
In Combustion Institute Canadian Section (CI/CS) : Spring Technical Meeting (Montreal, QC, Canada, May 15-18, 2017)
Hui, Eve, Ceccaldi, Caroline, Shijie, Qi et Lerouge, Sophie. 2017. « Development of an injectable and thermosensitive chitosan hydrogel for the prevention of post-surgical abdominal adhesions ». Affiche numéro 114068 présentée lors de la conférence : 33rd Annual Meeting of the Canadian Biomaterials Society (Winnipeg, MB, Canada, May 24-27, 2017). Hui, Eve, Ceccaldi, Caroline, Shijie, Qi et Lerouge, Sophie. 2017. « Injectable and thermosensitive chitosan hydrogels for the prevention of post-operative peritoneal adhesions ». Affiche numéro 964 présentée lors de la conférence : 2017 Annual Meeting & Exposition of the Society for Biomaterials (SFB) (Mineapolis, MN, USA, Apr. 05-08, 2017).
Ignatowicz, Kevin et Morency, François.
2017.
« Numerical study of ice particle shedding: Interpolation methods and 2D trajectories ».
In 63rd Aeronautics Conference : AERO2017 Proceedings (Toronto, ON, Canada, May 16-18, 2017)
Canadian Aeronautics and Space Institute.
Ijaz, M. F., Dubinskiy, S., Zhukova, Y., Korobkova, A., Pustov, Y., Brailovski, V. et Prokoshkin, S..
2017.
« Novel electrochemical test bench for evaluating the functional fatigue life of biomedical alloys ».
The Journal of The Minerals, Metals & Materials Society, vol. 69, nº 8.
pp. 1334-1339.
Imaouchen, Yacine, Kedadouche, Mourad, Alkama, Rezak et Thomas, Marc.
2017.
« A Frequency-Weighted Energy Operator and complementary ensemble empirical mode decomposition for bearing fault detection ».
Mechanical Systems and Signal Processing, vol. 82.
pp. 103-116.
Jaafar, M. A., Rousse, D. R., Gibout, S. et Bédécarrats, J. P..
2017.
« Numerical investigation of thermal conditions effect on dendritic growth in pure substances using a front tracking method ».
In XIIIeme Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (CIFQ) (Saint-Lô, France, 22-23 mai 2017)
Jaafar, Mohamad Ali, Ginout, Stéphane, Bédécarrats, Jean-Pierre et Rousse, Daniel R.. 2017. « Liens entre la dynamique de croissance dendritique et le champs de température local du liquide surfondue : Approche numérique ». Affiche présentée lors de la conférence : 25ème Congrès Français de Thermique : Thermique, Mers et Océans (Marseille, France, 30 mai - 02 juin 2017).
Jaafar, Mohamad Ali, Rousse, Daniel R., Gibout, Stéphane et Bédécarrats, Jean-Pierre.
2017.
« A review of dendritic growth during solidification: Mathematical modeling and numerical simulations ».
Renewable and Sustainable Energy Reviews, vol. 74.
pp. 1064-1079.
Jaifer, Rabie, Beauregard, Yvan et Bhuiyan, Nadia.
2017.
« Reimagining uncertainty and complexity evaluation in aerospace new product development-time and cost planning perspective ».
In 38th International Annual Conference of the American Society for Engineering Management (ASEM 2017) (Huntsville, AL, USA, Oct. 18-21, 2017)
pp. 815-824.
ASEM.
Javadi, Hamid, Jomaa, Walid, Texier, Damien, Brochu, Myriam et Bocher, Philippe.
2017.
« Surface roughness effects on the fatigue behavior of as-machined inconel 718 ».
In 8th International Conference on Materials Structure and Micromechanics of Fracture (MSMF 8) (Brno, Czech republic, July 27-29, 2016)
Coll. « Solid State Phenomena », vol. 258.
pp. 306-309.
Trans Tech Publications Ltd.
Jbira, I., Tlija, M., Louhichi, B. et Tahan, A..
2017.
« CAD/Tolerancing integration: Mechanical assembly with form defects ».
Advances in Engineering Software, vol. 114.
pp. 312-324.
Jomaa, Walid, Gakwaya, Augustin et Bocher, Philippe.
2017.
« Modeling of materials behavior in finite element analysis and simulation of machining processes : Identification techniques and challenges ».
In
Advanced Machining Processes: Innovative Modeling Techniques.
Coll. « Manufacturing Design and Technology Series ».
pp. 281-318. Boca Raton : CRC Press.
Jomaa, Walid, Lévesque, Julie, Bocher, Philippe, Divialle, Arnaud et Gakwaya, Augustin.
2017.
« Optimization study of dry peripheral milling process for improving aeronautical part integrity using Grey relational analysis ».
International Journal of Advanced Manufacturing Technology, vol. 91, nº 1-4.
pp. 931-942.
Jomaa, Walid, Mechri, Oussama, Levesque, Julie, Songmene, Victor, Bocher, Philippe et Gakwaya, Augustin.
2017.
« Finite element simulation and analysis of serrated chip formation during highspeed machining of AA7075T651 alloy ».
Journal of Manufacturing Processes, vol. 26.
pp. 446-458.
Jomaa, Walid, Songmene, Victor et Bocher, Philippe.
2017.
« Predictive analytical modeling of cutting forces generated by high-speed machining of ductile and hard metals ».
Machining Science and Technology, vol. 21, nº 3.
pp. 335-361.
Jomaa, Walid, Songmene, Victor, Bocher, Philippe et Gakwaya, Augustin.
2017.
« Fea-based comparative investigation on high speed machining of aluminum alloys aa6061-t6 and aa7075-t651 ».
In 9th International Congress on Precision Machining, (ICPM 2017) (Athens, Greece, Sept. 06-09, 2017)
Coll. « Solid State Phenomena », vol. 261.
pp. 347-353.
Jonas, John J., Aranas, Clodualdo, Fall, Ameth et Jahazi, Mohammad.
2017.
« Transformation softening in three titanium alloys ».
Materials & Design, vol. 113.
pp. 305-310.
Jourdain, Cyprien, Weiss, Julien et Seers, Patrice.
2017.
« Comparison of image preprocessing methods for fuel droplet characterization ».
In 47th AIAA Thermophysics Conference (Denver, CO, USA, June 05-09, 2017)
Coll. « AIAA Paper », vol. AIAA 2017-4350.
AIAA.
Kanthabhabha Jeya, Palaniappan Rahul et Bouzid, Abdel-Hakim.
2017.
« Creep and thermal ratcheting characterization of polytetrafluoroethylene-based gasket materials ».
Advanced Materials proceeding, vol. 2, nº 10.
pp. 609-614.
Kanthabhabha Jeya, Palaniappan Rahul, Zhao, Zijan et Bouzid, Abdel-Hakim.
2017.
« HDPE and PVC creep and thermal ratcheting behavior under compression ».
In 21st International Conference on Composite Materials (Xi'an, China, Aug. 20-25, 2017)
ICCM21.
Kanthabhabha Jeya, Rahul Palaniappan et Bouzid, Abdel-Hakim.
2017.
« Characterisation of polytetrafluoroethylene and fiber based gaskets under creep and thermal ratcheting ».
In ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017)
American Society of Mechanical Engineers (ASME).
Kanthabhabha Jeya, Rahul Palaniappan et Bouzid, Abdel-Hakim.
2017.
« Creep and thermal ratcheting characterization of polytetrafluoroethylene-based gasket materials ».
In World Congress on Advances in Structural Engineering an Mechanics (ASEM 17), The 2017 International Conference onSteel and Composite Structures (ICSCS17) (Ilsan (Seoul), Korea, Aug. 28 - Sept. 01, 2017)
IASEM Conferences.
Karabibene, K., Chatelain, J.-F., Beauchamp, Y. et Lebrun, G..
2017.
« Optimization of machining parameters for the trimming process of unidirectional flax fiber composites ».
In 10th Canadian-International Conference on Composites (Ottawa, ON, Canada, July 17-20, 2017)
Karganroudi, Sasan Sattarpanah, Cuillière, Jean-Christophe, François, Vincent et Tahan, Antoine Souheil.
2017.
« Assessment of the robustness of a fixtureless inspection method for non-rigid parts based on a verification and validation approach ».
Journal of Verification, Validation and Uncertainty Quantification, vol. 2, nº 4.
Kazeminia, Mehdi et Bouzid, Hakim.
2017.
« Evaluation of leakage through graphite-based compression packing rings ».
Journal of Pressure Vessel Technology, vol. 139, nº 1.
Kedadouche, Mourad et Liu, Zhaoheng.
2017.
« Fault feature extraction and classification based on WPT and SVD: Application to element bearings with artificially created faults under variable conditions ».
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 231, nº 22.
pp. 4186-4196.
Kemi Yotat, Frank Éric, Kenné, Jean-Pierre et Songmene, Victor.
2017.
« Optimal stochastic control of an aluminium recycling unit in reverse logistics ».
In 29th European Modeling and Simulation Symposium (EMSS 2017) Held at the International Multidisciplinary Modeling and Simulation Multiconference (I3M 2017) (Barcelona, Spain, Sept. 18-20, 2017)
pp. 385-390.
CAL-TEK S.r.l..
Khettabi, Riad, Nouioua, Mourad, Djebara, Abdelhakim et Songmene, Victor.
2017.
« Effect of MQL and dry processes on the particle emission and part quality during milling of aluminum alloys ».
International Journal of Advanced Manufacturing Technology, vol. 92, nº 5/8.
pp. 2593-2598.
Khou, J. C., Ghedhaïfi, W., Vancassel, X., Montreuil, E. et Garnier, F..
2017.
« CFD simulation of contrail formation in the near field of a commercial aircraft: Effect of fuel sulfur content ».
Meteorologische Zeitschrift, vol. 26, nº 6.
pp. 585-596.
Klotz, Thierry, Delbergue, Dorian, Miao, Hong-Yan, Bocher, Philippe, Lévesque, Martin et Brochu, Myriam.
2017.
« Analytical fatigue life prediction of shot peened Inconel 718 ».
In 13th International Conference on Shot Peening: ICSP13: Proceedings (Montréal, QC, Canada, 18-21 sept. 2017)
pp. 243-252.
Konopatsky, A. S., Dubinskiy, S. M., Zhukova, Yu S., Sheremetyev, V., Brailovski, V., Prokoshkin, S. D. et Filonov, M. R..
2017.
« Ternary Ti-Zr-Nb and quaternary Ti-Zr-Nb-Ta shape memory alloys for biomedical applications: Structural features and cyclic mechanical properties ».
Materials Science and Engineering: A, vol. 702.
pp. 301-311.
Konopatsky, A., Brailovski, V., Filonov, M., Dubinskiy, S., Zhukova, Y., Korotitskiy, A. et Prokoshkin, S..
2017.
« Manufacturing and characterization of novel Ti-Zr-Based shape memory alloys ».
[Article de conférence]. Materials Today: Proceedings, vol. 4, nº 3.
pp. 4856-4860.
Kreitcberg, A., Brailovski, V., Sheremetyev, V. et Prokoshkin, S..
2017.
« Effect of laser powder bed fusion parameters on the microstructure and texture development in superelastic Ti–18Zr–14Nb Alloy ».
Shape Memory and Superelasticity, vol. 3, nº 4.
pp. 361-372.
Kreitcberg, A., Brailovski, V. et Turenne, S..
2017.
« The build orientation-dependent ductility of IN625 alloy processed by laser powder-bed fusion ».
In 14th International Conference on Fracture (ICF 2017) (Rhodes, Greece, June 18-20, 2017)
pp. 1024-1025.
International Conference on Fracture.
Kreitcberg, Alena, Brailovski, Vladimir et Turenne, Sylvain.
2017.
« Effect of heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Inconel 625 alloy processed by laser powder bed fusion ».
Materials Science and Engineering: A, vol. 689.
pp. 1-10.
Kreitcberg, Alena, Brailovski, Vladimir et Turenne, Sylvain.
2017.
« Elevated temperature mechanical behavior of IN625 alloy processed by laser powder-bed fusion ».
Materials Science and Engineering: A, vol. 700.
pp. 540-553.
Kreitcberg, Alena, Brailovski, Vladimir, Turenne, Sylvain, Chanal, Cyrille et Urlea, Victor.
2017.
« Influence of thermo- and HIP treatments on the microstructure and mechanical properties of IN625 alloy parts produced by selective laser melting : A comparative study ».
In International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016)
Coll. « Materials Science Forum », vol. 879.
pp. 1008-1013.
Trans Tech Publications.
Kuester, Scheyla, Barra, Guilherme M. O. et Demarquette, Nicole R..
8 mars 2017.
« Did you Know that your Mobile Devices Cause Electromagnetic Interference? ».
[Article de recherche]. Substance ÉTS.
Kuester, Scheyla, Barra, Guilherme M. O. et Demarquette, Nicole R..
2017.
« Nanocomposites of SEBS/CNT for electromagnetic shielding: Effect of processing method and maleic anhydride ».
In 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017 (Anaheim, CA, USA, May 8-10, 2017)
Coll. « Annual Technical Conference - ANTEC, Conference Proceedings »
pp. 728-732.
Anaheim, CA, USA : Society of Plastics Engineers.
Kuester, Scheyla, Barra, Guilherme M. O. et Demarquette, Nicole R..
8 mars 2017.
« Saviez-vous que vos appareils mobiles émettent des interférences électromagnétiques? ».
[Article de recherche]. Substance ÉTS.
Kuester, Scheyla, Demarquette, Nicole R., Ferreira Jr, José Carlos, Soares, Bluma G. et Barra, Guilherme M. O..
2017.
« Hybrid nanocomposites of thermoplastic elastomer and carbon nanoadditives for electromagnetic shielding ».
European Polymer Journal, vol. 88.
pp. 328-339.
Kurusu, Rafael S. et Demarquette, Nicole R..
2017.
« Surface properties evolution in electrospun polymer blends by segregation of hydrophilic or amphiphilic molecules ».
European Polymer Journal, vol. 89.
pp. 129-137. Lafarga, Xavier Aguilo, Hernández, Pedro Gálvez, Vanderesse, Nicolas, González, Fernando Quevedo, Bocher, Philippe et Nuño, Natalia. 2017. « Effect of the building orientation on mechanical properties of porous structures made by additive manufacturing ». Communication lors de la conférence : 23rd Congress of the European Society of Biomechanics (Sevilla, Spain, July 02-05, 2017).
Lalonde, Sébastien, Guilbault, Raynald et Langlois, Sébastien.
2017.
« Modeling multilayered wire strands, a strategy based on 3D finite element beam-to-beam contacts - Part II: Application to wind-induced vibration and fatigue analysis of overhead conductors ».
International Journal of Mechanical Sciences, vol. 126.
pp. 297-307.
Lalonde, Sébastien, Guilbault, Raynald et Légeron, Frédéric.
2017.
« Modeling multilayered wire strands, a strategy based on 3D finite element beam-to-beam contacts - Part I: Model formulation and validation ».
International Journal of Mechanical Sciences, vol. 126.
pp. 281-296.
Lamarche, Louis.
2017.
« G-function generation using a piecewise-linear profile applied to ground heat exchangers ».
International Journal of Heat and Mass Transfer, vol. 115, nº Part. B.
pp. 354-360.
Lamarche, Louis.
2017.
« Mixed arrangement of multiple input-output borehole systems ».
Applied Thermal Engineering, vol. 124.
pp. 466-476.
Lamarre, Simon G., Demers, Vincent et Chatelain, Jean-François.
2017.
« Low-pressure powder injection molding using an innovative injection press concept ».
International Journal of Advanced Manufacturing Technology, vol. 91, nº 5-8.
pp. 2595-2605.
Landau, Kurt, Nadeau, Sylvie, Le Floch, Tiphaine et Morency, François.
2017.
« Ergonomic time and motion studies of aircraft de-icing work ».
Journal of Ergonomics, vol. 7, nº 4.
Lapalme, Denis, Lemaire, Romain et Seers, Patrice.
2017.
« Assessment of the method for calculating the Lewis number of H2/CO/CH4 mixtures and comparison with experimental results ».
International Journal of Hydrogen Energy, vol. 42, nº 12.
pp. 8314-8328. Laroche, E., Petit, Y., Ménard, A. L. et Wagnac, E.. 2017. « Évaluation du comportement poroélastique de disques lombaires porcins pour comparer les instrumentations de la colonne vertébrale ». Communication lors de la conférence : 37e Journée de la Recherche du POES et de la division d'orthopédie de l'Université de Montréal (Montréal, QC, Canada, 18 mai 2017). Laurent, H., Wagnac, E., Facchinello, Y., Mac Thiong, J. M. et Petit, Y.. 2017. « Visualisation en temps réel du disque intervertébral lors de fractures vertébrales à haute énergie ». Communication lors de la conférence : 37e Journée de la Recherche du POES et de la division d'orthopédie de l'Université de Montréal (Montréal, QC, Canada, 18 mai 2017).
Le Borgne, K. et Rousse, D. R..
2017.
« Conception de déflecteurs pour limiter la contamination croisée dans un échangeur air-air ».
In XIIIeme Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (CIFQ) (Saint-Lô, France, 22-23 mai 2017)
Le Floch, Arnaud, Mohammed-Taifour, Abdelouahab et Weiss, Julien.
2017.
« Investigation of the low-frequency breathing motion in two turbulent separation bubbles ».
In 47th AIAA Fluid Dynamics Conference (Denver, CO, USA, June 05-09, 2017)
Coll. « AIAA Paper », vol. AIAA 2017-3970.
AIAA.
Léger, J. et Rousse, D. R..
2017.
« Comparaison expérimentale de la distribution de chaleur engendrée par des appareils de chauffage électrique ».
In XIIIeme Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (CIFQ) (Saint-Lô, France, 22-23 mai 2017)
Léger, J. et Rousse, D. R..
2017.
« Des instruments de mesure pour la thermique du bâtiment ».
In XIIIeme Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (CIFQ) (Saint-Lô, France, 22-23 mai 2017)
Lemaire, Romain, Menage, Delphine et Seers, Patrice.
2017.
« Study of the high heating rate devolatilization of bituminous and subbituminous coals-Comparison of experimentally monitored devolatilization profiles with predictions issued from single rate, two-competing rate, distributed activation energy and chemical percolation devolatilization models ».
Journal of Analytical and Applied Pyrolysis, vol. 123.
pp. 255-268.
Lentzakis, Helen, Moghimian, Nima, Saeidlou, Sajjad, Song, Naiheng, Kaydanova, Tatiana, Poulin, Jacques et David, Éric.
2017.
« Mechanical, thermal and electrical property enhancement of graphene-polymer nanocomposites ».
In 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017 (Anaheim, CA, USA, May 08-10, 2017)
Coll. « Annual Technical Conference - ANTEC, Conference Proceedings »
pp. 2174-2178.
Anaheim, CA, USA : Society of Plastics Engineers.
Leroux, Tony, Laroche, Chantal, Giguère, Christian et Voix, Jérémie.
2017.
« Utilisation des prothèses auditives en milieu de travail bruyant ».
Coll. « Études et recherches », vol. R-929.
IRSST. 103 p.
Letenneur, Morgan, Brailovski, Vladimir, Kreitcberg, Alena, Paserin, Vladimir et Bailon-Poujol, Ian.
2017.
« Laser powder bed fusion of water-atomized iron-based powders: process optimization ».
Journal of Manufacturing and Materials Processing, vol. 1, nº 2.
Li, Wenchao, Vu, Viet-Hung, Liu, Zhaoheng, Thomas, Marc et Hazel, Bruce.
2017.
« Application of adaptable functional series vector time-dependent autoregressive model for extraction of real modal parameters for identification of time-varying systems ».
Measurement: Journal of the International Measurement Confederation, vol. 103.
pp. 143-156.
Liu, Zhaoheng, Chung, Kwok-Wai et Wang, Wei.
2017.
« A perturbed nonlinear model of an articulated vehicle with driver control ».
In 10th Chaotic Modeling and Simulation International Conference (Barcelona, Spain, May 30 - 02 June, 2017)
pp. 549-558.
International Society for the Advancement of Science and Technology.
Loucif, A., Bitterlin, M., Jahazi, M., Tremblay, R., Morin, J. B. et Lapierre-Boire, L. P..
2017.
« Crack analysis in as cast large size ingot of a high strength steel ».
In 14th International Conference on Fracture (ICF 2017) (Rhodes, Greece, June 18-20, 2017)
pp. 766-767.
International Conference on Fracture.
Loucif, A., Shahriari, D., Chadha, K., Jahazi, M., Tremblay, R. et Lapierre-Boire, L. P..
2017.
« Analysis of cracks and failure during solidification of a high strength low alloy steel ».
In 14th International Conference on Fracture (ICF 2017) (Rhodes, Greece, June 18-20, 2017)
pp. 770-771.
International Conference on Fracture.
Loucif, Abdelhalim, Shahriari, Davood, Zhang, Chunping P., Jahazi, Mohammad, Lapierre-Boire, Louis-Philippe et Tremblay, Rami.
2017.
« Macrosegregation of alloying elements in hot top of large size high strength steel ingot ».
In International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016)
Coll. « Materials Science Forum », vol. 879.
pp. 1176-1181.
Trans Tech Publications.
Luk-Cyr, Jacques, El-Bawab, Rayan, Champliaud, Henri, Lanteigne, Jacques et Vadean, Aurelian.
2017.
« Sequential approximate optimization of industrial hammer peening using finite element simulations ».
Structural and Multidisciplinary Optimization, vol. 55, nº 3.
pp. 767-778.
Luk-Cyr, Jacques, Paquet, Daniel, Lanteigne, Jacques, Champliaud, Henri et Vadean, Aurelian.
2017.
« A unified plasticity methodology for rate- and temperature-sensitive alloys exhibiting a non-linear kinematic hardening behavior ».
Acta Mechanica Solida Sinica, vol. 30, nº 1.
pp. 27-37.
Majidi, Omid, Jahazi, Mohammad, Bombardier, Nicolas et Samuel, Ehab.
2017.
« Variation of strain rate sensitivity index of a superplastic aluminum alloy in different testing methods ».
In 20th International ESAFORM Conference on Material Forming (ESAFORM) (Dublin, Ireland, Apr. 26-28, 2017)
Coll. « AIP Conference Proceedings », vol. 1896.
USA : American Institute of Physics.
Mansur Rodrigues Filho, Jorge Franklin, Tremblay, Nicolas, Gláucio, Soares da Fonseca et Belanger, Pierre.
2017.
« The feasibility of structural health monitoring using the fundamental shear horizontal guided wave in a thin aluminum plate ».
Materials, vol. 10, nº 5.
Marani, Mohsen, Songmene, Victor et Maher, Ibrahem.
2017.
« Investigation on surface finish and tool condition while turning AL20 Mg2Si metal matrix composite ».
In Proceedings of The IRES International Conference (Teheran, Iran, June 12-13, 2017)
The Institute of Research Engineers and Scientists International Conference.
Marani, Mohsen, Songmene, Victor et Maher, Ibrahem.
2017.
« Investigation on surface finish and tool condition while turning AL20Mg2Si metal matrix composite ».
International Journal of Advances in Science, Engineering and Technology, vol. 5, nº 3, Supp. 1.
pp. 11-14.
Martinez, N., Ibrahim, H., Ilinca, A., Rousse, D., Chandra, A. et Ramdenee, D..
2017.
« Modélisation d’un système hybride éolien-diesel avec stockage d’air comprimé (SHEDAC) ».
In XIIIeme Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (Saint-Lô, France, 22-24 mai 2017)
Martinez, N., Ilinca, A., Ibrahim, H., Rousse, D. R., Chandra, A. et Ramdenee, D..
2017.
« Étude de faisabilité d'un générateur Éolien-Diesel-Air comprimé pour sites isolés ».
In XIIIeme Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (CIFQ) (Saint-Lô, France, 22-23 mai 2017)
Marty, Clément, Günebak, Servet, Nadeau, Sylvie et Morency, François.
2017.
« L’oculométrie peut-elle être utilisée pour étudier le travail de coordonnateur de trafic dans un centre de dégivrage aéronautique centralisé ? ».
In 52ème Congrès de la Société d’Ergonomie de Langue Française (SELF) (Toulouse, France, Sept. 20-22, 2017)
pp. 215-222.
Société d'Ergonomie de Langue Française.
Masoumi, F., Shahriari, D., Jahazi, M., Cormier, J. et Flipo, B. C. D..
2017.
« On the occurrence of liquation during linear friction welding of Ni-based superalloys ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 48A, nº 6.
pp. 2886-2899.
McMeekin, Kevin, Sirois, Frédéric, Tousignant, Maxime et Bocher, Philippe.
2017.
« Improving the accuracy of time-harmonic FE simulations in induction heating applications Towards better ferromagnetic material models ».
COMPEL - The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, vol. 36, nº 2.
pp. 526-534.
Meimandi, Shilan, Vanderesse, Nicolas, Thibault, Denis, Bocher, Philippe et Viens, Martin.
2017.
« Macro-defects characterization in cast CA-6NM martensitic stainless steel ».
Materials Characterization, vol. 124.
pp. 31-39.
Ménard, Jérémie, Léger-St-Jean, Benjamin, Balg, Frédéric, Petit, Yvan, Beauchamp, Marc et Rouleau, Dominique M..
2017.
« Suture bridge transosseous equivalent repair is stronger than transosseous tied braided-tape ».
Journal of Orthopaedic Science, vol. 22, nº 6.
pp. 1120-1125.
Meziani, Salim, Zarour, Djamal et Thomas, Marc.
2017.
« Experimental study for early detection of bearing defects by vibration and acoustic emission ».
In 23ème Congrès Français de Mécanique (CFM) (Lille, France, 28 août - 1er sept. 2017)
Association Française de Mécanique (AFM).
Mirakhorli, F., Cao, X., Pham, X. T., Wanjara, P. et Fihey, J. L..
2017.
« Phase structures and morphologies of tempered CA6NM stainless steel welded by hybrid laser-arc process ».
Materials Characterization, vol. 123.
pp. 264-274.
Mirakhorli, F., Cao, X., Pham, X. T., Wanjara, P. et Fihey, J. L..
2017.
« Technical challenges in narrow-gap root pass welding during tandem and hybrid laser-arc welding of a thick martensitic stainless steel ».
In International conference on processing and manufacturing of advanced materials (THERMEC) (Graz, Austria, May 29-June 03, 2016)
Coll. « Materials Science Forum », vol. 879.
pp. 1305-1310.
Trans Tech Publications.
Moghimian, Nima, Saeidlou, Sajjad, Lentzakis, Helen, Rosi, Gian Flippo, Naiheng, Song et David, Éric.
2017.
« Electrical conductivity of commercial graphene polyethylene nanocomposites ».
In IEEE 17th International Conference on Nanotechnology (IEEE-NANO) (Pittsburgh, PA, USA, July 25-28, 2017)
pp. 757-761.
Piscataway, NJ, USA : IEEE. Mohseni, E. et Viens, M.. 2017. « Sensitivity of eddy current signals to probe's tilt and lift-off while scanning semi-elliptical surface notches - a finite element modeling approach ». Communication lors de la conférence : NDT in Canada 2017 (Québec, QC, Canada, June 06-08, 2017). Morency, François et Beaugendre, Héloïse. 2017. « Improvement of near wall velocity prediction using mask in a penalised Vortex-In-Cell algorithm ». Communication lors de la conférence : 14th US National Congress on Computational Mechanics (Montreal, QC, Canada, July 17-20, 2017).
Moret, Maxime, Delecourt, Alexandre, Moustapha, Hany, Abenhaim, Acher-Igal et Garnier, Francois.
2017.
« Automated thermal and stress preliminary analyses applied to a turbine rotor ».
Aerospace Science and Technology, vol. 63.
pp. 123-131.
Mostafa, Ahmad, Rubio, Ignacio Picazo, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2017.
« Structure, texture and phases in 3D printed IN718 alloy subjected to homogenization and HIP treatments ».
Metals, vol. 7, nº 6.
Nadeau, Sylvie. 2017. « La perception des risques ». Communication lors de la conférence : Événement – Leadership SST du Centre patronal de santé et de sécurité du travail du Québec : Les risques et la « Tolérance Zéro », êtes-vous bien outillé? (Brossard, QC, Canada, 30 mai 2017).
Nadeau, Sylvie.
2017.
« Le lean university va-t-il franchir nos portes? ».
Travail et Santé, vol. 33, nº 3.
p. 36.
Nadeau, Sylvie.
2017.
« Lean, Six Sigma and Lean Six Sigma in higher education: a review of experiences around the world ».
American Journal of Industrial and Business Management, vol. 7, nº 5.
pp. 591-603.
Nadeau, Sylvie et Landau, Kurt.
2017.
« Industrie 4.0 : Êtes-vous prêts (es)? ».
Travail et Santé, vol. 33, nº 2.
p. 30.
Nadeau, Sylvie et Landau, Kurt.
2017.
« Towards dynamic and adaptive allocation of staff in a digital-organised production context: an innovative perspective from work science ».
Journal of Ergonomics, vol. 7, nº 4.
Nadeau, Sylvie et Morency, François.
2017.
« De-icing of aircraft : incorporating business risks and occupational health and safety ».
International Journal of Safety and Security Engineering, vol. 7, nº 2.
pp. 247-266.
Nadon, Vincent, Bockstael, Annelies, Botteldooren, Dick, Lina, Jean-Marc et Voix, Jérémie.
2017.
« Design considerations for robust noise rejection in otoacoustic emissions measured in-field using adaptive filtering ».
Acta Acustica United with Acustica, vol. 103, nº 2.
pp. 299-310.
Nadon, Vincent, Bockstael, Annelies, Botteldooren, Dick et Voix, Jérémie.
2017.
« Field monitoring of otoacoustic emissions during noise exposure: Pilot study in controlled environment ».
American Journal of Audiology, vol. 26, nº 3.
pp. 352-368. Nadon, Vincent et Voix, Jérémie. 2017. « Continuous hearing health monitoring using otoacoustic emissions ». Affiche présentée lors de la conférence : Symposium EREST - Équipe de recherche en sécurité du travail (Montreal, QC, Canada, 2017).
Nadon, Vincent et Voix, Jérémie.
2017.
« Real-time estimation of the passive attenuation for otoacoustic emission measurement probes ».
[Résumé d'une communication à une conférence]. Journal of the Acoustical Society of America, vol. 141, nº 5.
p. 3732. Nadon, Vincent et Voix, Jérémie. 2017. « Real-time estimation of the passive attenuation for otoacoustic emission measurement probes ». Affiche numéro 3pNSc7 présentée lors de la conférence : 3rd Joint Meeting of the Acoustical Society of America and the European Acoustics Association (Acoustics '17 Boston) (Boston, MA, USA, June 25-29, 2017).
Nathan, J., Meyer Forsting, A. R., Troldborg, N. et Masson, C..
2017.
« Comparison of OpenFOAM and EllipSys3D actuator line methods with (NEW) Mexico results ».
In Wake Conference 2017 (Visby, Sweden, May 30-June 01, 2017)
Coll. « Journal of Physics: Conference Series », vol. 854.
Institute of Physics Publishing.
Nazarenko, Yevgen, Fournier, Sébastien, Kurien, Uday, Rangel-Alvarado, Rodrigo Benjamin, Nepotchatykh, Oleg, Seers, Patrice et Ariya, Parisa A..
2017.
« Role of snow in the fate of gaseous and particulate exhaust pollutants from gasoline-powered vehicles ».
Environmental Pollution, vol. 223.
pp. 665-675. Nemati, Ali, Nadeau, Sylvie et Ateme-Nguema, Barthélemy. 2017. « Lean tools adaptation into mining: An occupational health and safety approach ». Affiche présentée lors de la conférence : Congrès annuel AQHSST (Victoriaville, QC, Canada, 16-18 mai 2017).
Ngô, Valérie Tuyêt Mai, Nadeau, Sylvie et Hallé, Stéphane.
2017.
« Ergonomic design of a cooling vest in deep and ultra-deep mining environments ».
Occupational Ergonomics, vol. 13, nº S1.
pp. 115-126.
Nguyen, T. H. D. et Dao, T. M..
2017.
« Novel framework to design reliable resilient leagile supply chain ».
In 47th International Conference on Computers and Industrial Engineering: How Digital Platforms and Industrial Engineering are Transforming Industry and Services (CIE 2017) (Lisbon, Portugal, Oct. 11-13, 2017)
Coll. « Proceedings of International Conference on Computers and Industrial Engineering, CIE »
Curran Associates Inc..
Nguyen, Thi Hong Dang et Dao, Thien My.
2017.
« Optimize lean supply chain design under uncertainties by hybrid meta-heuristics ».
In 7th Annual Conference on Industrial Engineering and Operations Management (IEOM) (Rabat, Morocco, Apr. 11-13, 2017)
p. 515.
IEOM Society.
Nguyen, Thi Hong Dang et Dao, Thien-My.
2017.
« New strategy to optimize lean supply chain design by meta-heuristic ».
American Journal of Engineering and Applied Sciences, vol. 10, nº 1.
pp. 156-164.
Nguyen-Tri, Phuong, Triki, Ennouri, Tuduri, Ludovic, Gauvin, Chantal et Vu-Khanh, Toan.
2017.
« Effet des fluides de coupe sur la résistance à la coupure et à la perforation des gants de protection ».
Coll. « Rapports Scientifiques », vol. R-987.
IRSST. 93 p.
Niknam, Seyed Ali, Balazinski, Marek et Songmene, Victor.
2017.
« To characterize and optimize the surface quality attributes in slot milling operation ».
International Journal of Advanced Manufacturing Technology, vol. 93, nº 1-4.
pp. 727-746.
Niknam, Seyed Ali et Songmene, Victor.
2017.
« Burr formation and correlation with cutting force and acoustic emission signals ».
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 231, nº 3.
pp. 399-414.
Nisol, Bernard, Watson, Sean, Lerouge, Sophie et Wertheimer, Michael R..
2017.
« Energetics of reactions in a dielectric barrier discharge with argon carrier gas: V hydrocarbons ».
Plasma Processes and Polymers, vol. 14, nº 8.
Novelli, M., Maurel, P., Weiss, L., Grosdidier, T. et Bocher, P..
2017.
« Stress-Assisted and Strain-Induced Martensites formed by cryogenic ultrasonic shot peening in austenitic stainless steels ».
In 13th International Conference on Shot Peening: ICSP13: Proceedings (Montréal, QC, Canada, 18-21 sept. 2017)
pp. 510-515.
Ouaret, Samir, Kenné, Jean-Pierre, Gharbi, Ali et Polotski, Vladimir.
2017.
« Age-dependent production and replacement strategies in failure-prone manufacturing systems ».
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 231, nº 3.
pp. 540-554.
Padois, Thomas, Doutres, Olivier, Sgard, Franck et Berry, Alain.
2017.
« Time domain localization technique with sparsity constraint for imaging acoustic sources ».
Mechanical Systems and Signal Processing, vol. 94.
pp. 85-93. Padois, Thomas, Gaudreau, Marc-André, Doutres, Olivier, Sgard, Franck C., Berry, Alain, Marcotte, Pierre et Laville, Frédéric. 2017. « Comparison of time domain noise source localization techniques: Application to impulsive noise of nail guns ». Communication lors de la conférence : 3rd Joint Meeting of the Acoustical Society of America and the European Acoustics Association (Boston, MA, USA, June 25-29, 2017).
Padois, Thomas, Sgard, Franck, Doutres, Olivier et Berry, Alain.
2017.
« Acoustic source localization using a polyhedral microphone array and an improved generalized cross-correlation technique ».
Journal of Sound and Vibration, vol. 386.
pp. 82-99.
Paradis, P. L., Lamarche, L., Rousse, D. R. et Nesreddine, H..
2017.
« Modèle thermique d'un collecteur solaire photovotaïque ».
In XIIIeme Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (CIFQ) (Saint-Lô, France, 22-23 mai 2017)
Paradis, P. L., Talbot, M. H., Rousse, D. R., Lamarche, L. et Nesreddine, H..
2017.
« Modélisation de la stratification thermique d'un réservoir de stockage ».
In XIIIeme Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (CIFQ) (Saint-Lô, France, 22-23 mai 2017)
Paradis, Pierre-Luc, Rousse, Daniel R., Lamarche, Louis et Nesreddine, Hakim.
2017.
« A 2-D transient numerical heat transfer model of the solar absorber plate to improve PV/T solar collector systems ».
Solar Energy, vol. 153.
pp. 366-378. Pelletier, V., Petit, Y., Facchinello, Y., Lerouge, S., Assad, M. et Wagnac, E.. 2017. « Évaluation biomécanique en moment pur de la colonne vertébrale : description du dispositif de validation ». Communication lors de la conférence : 37e Journée de la Recherche du POES et de la division d'orthopédie de l'Université de Montréal (Montréal, QC, Canada, 18 mai 2017). Pelletier, V., Wagnac, E., Petit, Y., Facchinello, Y., Lerouge, S. et Assad, M.. 2017. « Frictionless device for biomechanical assessment of spinal specimen under pure moment loading : system description and validation ». Affiche présentée lors de la conférence : 37e Journée de la Recherche du POES et de la division d'orthopédie de l'Université de Montréal (Montréal, QC, Canada, 18 mai 2017).
Pelletier, Vincent, Petit, Yvan, Brailovski, Vladimir, Denis, Ronald, Studer, Anne-Sophie et Wagnac, Éric.
15 novembre 2017.
« Imprimer un estomac 3D pour mieux éduquer en chirurgie bariatrique ».
[Article de recherche]. Substance ÉTS.
Pelletier, Vincent, Petit, Yvan, Brailovski, Vladimir, Denis, Ronald, Studer, Anne-Sophie et Wagnac, Éric.
15 novembre 2017.
« Printing a 3D Stomach Teaching Tool for Bariatric Surgery ».
[Article de recherche]. Substance ÉTS.
Pereira, Daniel, Haiat, Guillaume, Fernandes, Julio et Belanger, Pierre.
2017.
« Simulation of acoustic guided wave propagation in cortical bone using a semi-analytical finite element method ».
Journal of the Acoustical Society of America, vol. 141, nº 4.
pp. 2538-2547. Peyrache, L. M., Petit, Y., Facchinello, Y., Mac Thiong, J. M. et Wagnac, E.. 2017. « Conception et caractérisation d'un substitut physique de moelle épinière ». Communication lors de la conférence : 37e Journée de la Recherche du POES et de la division d'orthopédie de l'Université de Montréal (Montréal, QC, Canada, 18 mai 2017). Piché, Paul, Haillot, D., Gibout, S., Arrabie, C., Lamalice, A., Rousse, D. et Py, X.. 2017. « On the way to developing northern greenhouses adapted to population and climate: energy issues ». Communication lors de la conférence : Arctic Change Conference (AC 2017) (Quebec, QC, Canada, Dec. 11-15, 2017).
Piengang, Fabrice Chilly Ngamaleu, Beauregard, Yvan et Kenné, Jean-Pierre.
2017.
« Introduction to optimization of decision-making in coupled, dynamic and uncertain production, maintenance and product development environment ».
In 38th International Annual Conference of the American Society for Engineering Management (ASEM 2017) (Huntsville, AL, USA, Oct. 18-21, 2017)
pp. 210-220.
ASEM.
Poirier, Marc, Gagnon, Martin, Tahan, Antoine, Coutu, André et Chamberland-lauzon, Joël.
2017.
« Extrapolation of dynamic load behaviour on hydroelectric turbine blades with cyclostationary modelling ».
Mechanical Systems and Signal Processing, vol. 82.
pp. 193-205.
Polotski, Vladimir et Kenne, Jean-Pierre.
2017.
« Adaptive control of manufacturing systems with incomplete information about demand and inventory ».
[Article de conférence]. IFAC-PapersOnLine, vol. 50, nº 1.
pp. 15598-15603.
Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali.
2017.
« Production and setup policy optimization for hybrid manufacturing–remanufacturing systems ».
International Journal of Production Economics, vol. 183, Part B.
pp. 322-333.
Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali.
2017.
« Set-up and production planning in hybrid manufacturing-remanufacturing systems with large returns ».
International Journal of Production Research, vol. 55, nº 13.
pp. 3766-3787.
Poulin, Jean-René, Terriault, Patrick, Dubé, Martine et Vachon, Pierre-Luc.
2017.
« Development of a morphing wing extrados made of composite materials and actuated by shape memory alloys ».
Journal of Intelligent Material Systems and Structures, vol. 28, nº 11.
pp. 1437-1453.
Prokoshkin, S., Dubinskiy, S., Brailovski, V., Korotitskiy, A., Konopatsky, A., Sheremetyev, V. et Blinova, E..
2017.
« Nanostructures and stress-induced phase transformation mechanism in titanium nickelide annealed after moderate cold deformation ».
Materials Letters, vol. 192.
pp. 111-114.
Prokoshkin, Sergey, Brailovski, Vladimir, Dubinskiy, Sergey, Inaekyan, Karine et Kreitcberg, Alena.
2017.
« Peculiarities of nanostructure formation upon post-deformation annealing of Ti-Ni shape memory alloys ».
[Article de conférence]. Materials Today: Proceedings, vol. 4, nº 3.
pp. 4819-4824.
Quevillon, O., Lamarche, L. et Kajl, S..
2017.
« Couplage d'un échangeur air-sol pour augmenter la performance en chauffage d'une pompe à chaleur à air ».
In XIIIeme Colloque Inter-universitaire Franco-Québécois (CIFQ) (Saint-Lô, France, 22-24 mai 2017)
Rezabeigi, Ehsan, Sta, Marwa, Swain, Mitasha, McDonald, Julia, Demarquette, Nicole R., Drew, Robin A. L. et Wood-Adams, Paula M..
2017.
« Electrospinning of porous polylactic acid fibers during nonsolvent induced phase separation ».
Journal of Applied Polymer Science, vol. 134, nº 20.
Rezkallah, Miloud, Sharma, Shailendra, Chandra, Ambrish, Singh, Bhim et Rousse, Daniel R..
2017.
« Lyapunov function and sliding mode control approach for Solar-PV grid interface system ».
IEEE Transactions on Industrial Electronics, vol. 64, nº 1.
pp. 785-795.
Riahi, Nesrine, Murschel, Frederic, Lerouge, Sophie, Durocher, Yves, Henry, Olivier et De Crescenzo, Gregory.
2017.
« Bioavailability of immobilized epidermal growth factor: covalent versus noncovalent grafting ».
Biointerphases, vol. 12, nº 1.
Rimpault, X., Chatelain, J. F., Klemberg-Sapieha, J. E. et Balazinski, M..
2017.
« Tool wear and surface quality assessment of CFRP trimming using fractal analyses of the cutting force signals ».
CIRP Journal of Manufacturing Science and Technology, vol. 16.
pp. 72-80.
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, Jolanta Ewa et Balazinksi, Marek.
2017.
« Burr height monitoring while drilling of CFRP/titanium/aluminium stacks ».
Mechanics and Industry, vol. 18, nº 1.
Robin, Olivier, Amedin, Celse Kafui, Berry, Alain, Atalla, Noureddine, Doutres, Olivier et Sgard, Franck. 2017. « Laboratory and in situ sound absorption measurement under a synthetized diffuse acoustic field: A case study on five materials ». Communication lors de la conférence : 5th Symposium on the Acoustics of Poro-Elastic Materials (SAPEM) (Le Mans, France, Dec. 06-08, 2017).
Rogti, Fatiha et David, Éric.
2017.
« Effect of SiC particles on the electrical conductivity of epoxy composites ».
Journal of Electronic Materials, vol. 46, nº 2.
pp. 742-746.
Rosi, G. F., Fréchette, M., David, É. et Fabiani, D..
2017.
« Behavior of polyethylene-based nanocomposites containing multi-layer graphene filler ».
In IEEE Conference on Electrical Insulation and Dielectric Phenomenon (CEIDP) (Fort Worth, TX, USA, Oct. 22-25, 2017)
pp. 473-476.
Piscataway, NJ, USA : IEEE.
Rosi, G. F., Frechette, M., David, E. et Fabiani, D..
2017.
« Dielectric properties of polyethylene with graphene-like additive: Effect of the fabrication technique ».
In IEEE Conference on Electrical Insulation and Dielectric Phenomenon (CEIDP) (Fort Worth, TX, USA, Oct. 22-25, 2017)
pp. 481-484.
Piscataway, NJ, USA : IEEE.
Rousseau, Clément, Fannou, Jean-Louis Comlan, Lamarche, Louis et Kajl, Stanislaw.
2017.
« Modeling and experimental validation of a transient direct expansion heat pump ».
International Journal of Renewable Energy Development, vol. 6, nº 2.
pp. 145-155.
Saadati, Mohammad, Azari Khosroshahi, Rasoul, Ebrahimi, Golamreza et Jahazi, Mohammad.
2017.
« Twin-assisted precipitation during hot compression of an Mg-Gd-Zn-Zr magnesium alloy ».
Materials Science and Engineering: A, vol. 706.
pp. 142-152.
Saadati, Mohammad, Khosroshahi, Rasoul Azari, Ebrahimi, Gholamreza et Jahazi, Mohammad.
2017.
« Formation of precipitates in parallel arrays on LPSO structures during hot deformation of GZ41K magnesium alloy ».
Materials Characterization, vol. 131.
pp. 234-243.
Sabri, V., Sattarpanah, S., Tahan, S. A., Cuillière, J. C., François, V. et Pham, X. T..
2017.
« A robust and automated FE-based method for fixtureless dimensional metrology of non-rigid parts using an improved numerical inspection fixture ».
International Journal of Advanced Manufacturing Technology, vol. 92, nº 5-8.
pp. 2411-2423.
Saeed Kilani, Mohammad, Zehtabi, Fatemeh, Lerouge, Sophie, Soulez, Gilles, Bartoli, Jean Michel, Vidal, Vincent et Badran, Mohammad F..
2017.
« New alcohol and onyx mixture for embolization: Feasibility and proof of concept in both in vitro and in vivo models ».
CardioVascular and Interventional Radiology, vol. 40, nº 5.
pp. 735-743.
Saleem, Essa Abrahim Abdulgader et Dao, Thien-My.
2017.
« Series-parallel systems reliability optimization using genetic algorithm and statistical analysis ».
[Article de conférence]. International Journal of Industrial and Manufacturing Engineering, vol. 11, nº 5.
pp. 953-959.
Saleem, Essa Abrahim Abdulgader, Dao, Thien-My et Zhaoheng, Liu.
2017.
« Multi-objective optimization of multi-state reliability system using hybrid metaheuristic genetic algorithm and fuzzy function for redundancy allocation ».
American Journal of Engineering Research, vol. 6, nº 10.
pp. 98-107. Samaei, Sepideh, Guyot, C., Cerruti, M. et Lerouge, Antony. 2017. « Optimization of a tissue-adhesive gel with rapid gelation and strong mechanical properties for cell therapy and tissue engineering ». Communication lors de la conférence : 33rd Annual Meeting of the Canadian Biomaterials Society (Winnipeg, MB, Canada, May 24-27, 2017).
Sarafan, S., Wanjara, P., Gholipour, J., Champliaud, H. et Mathieu, L..
2017.
« Mechanical properties of electron beam welds in heavy-section UNS S41500 martensitic stainless steel ».
International Journal of Advanced Manufacturing Technology, vol. 91, nº 9/12.
pp. 4141-4150.
Sarafan, Sheida, Wanjara, Priti, Gholipour, Javad, Champliaud, Henri et Mathieu, Louis.
2017.
« Mehanical properties of electron beam welded joints in thick gage CA6NM stainless steel ».
Journal of Materials Engineering and Performance, vol. 26, nº 10.
pp. 4768-4780.
Savoji, Houman, Maire, Marion, Lequoy, Pauline, Liberelle, Benoit, De Crescenzo, Gregory, Ajji, Abdellah, Wertheimer, Michael R. et Lerouge, Sophie.
2017.
« Combining electrospun fiber mats and bioactive coatings for vascular graft prostheses ».
Biomacromolecules, vol. 18, nº 1.
pp. 303-310.
Sgard, Franck, Nélisse, Hugues, Benacchio, Simon, Doutres, Olivier, Padois, Thomas et Gaudreau, Marc-André.
2017.
« A finite-element model to predict incidence dependent and diffuse field noise reduction based attenuation of earmuffs ».
In 24th International Congress on Sound and Vibration (ICSV) (London, United kingdom, July 23-27, 2017)
International Institute of Acoustics and Vibration (IIAV).
Shaer, B., Kenné, J. P., Kaddissi, C. et Mintsa, H. A..
2017.
« Real-time hybrid control of electrohydraulic active suspension ».
International Journal of Robust and Nonlinear Control, vol. 27, nº 18.
pp. 4968-4991.
Sheremetyev, V. A., Dubinskiy, S. M., Ikbal, M. A., Korobkova, A. A., Kazakbiev, A. M., Prokoshkin, S. D. et Brailovski, V..
2017.
« Effect of dynamical chemical etching on the porous structure parameters of superelastic medical TiNbZr alloy foam ».
Russian Metallurgy (Metally), vol. 2017, nº 10.
pp. 789-793.
Simoneau, Charles, Terriault, Patrick, Jetté, Bruno, Dumas, Mathieu et Brailovski, Vladimir.
2017.
« Development of a porous metallic femoral stem: Design, manufacturing, simulation and mechanical testing ».
Materials and Design, vol. 114.
pp. 546-556.
Singh, Gagandeep, Mougel, Leo, Beauregard, Yvan et Zhao, Yaoyao Fiona.
2017.
« Towards optimal engineering multitasking level through stochastic modelling ».
International Journal of Operational Research, vol. 28, nº 2.
pp. 263-278.
Siredey-Schwaller, N., Hamel-Akre, J., Peltier, L., Hazotte, A. et Bocher, P..
2017.
« Solidification sequence of Ni-Si-Cr ~3wt% B brazing alloys ».
Welding in the World, vol. 61, nº 6.
pp. 1253-1265.
Slamani, M., Djeffal, S. et Chatelain, J-F..
2017.
« Experimental investigation of robotic machining errors of carbon fiber reinforced polymers ».
In La 3ème Conférence Internationale de Mécanique (ICM) (Annaba, Algérie, 26-27 avril 2017)
Slim, H., Nadeau, S. et Morency, F.. 2017. « A review of applied methods for aircraft on-ground deicing ». Affiche présentée lors de la conférence : 39e Congrès de l'Association Québécoise pour l'Hygiène, la Santé et la Sécurité du Travail (AQHSST) (Victoriaville, QC, Canada, 16-18 mai 2017).
Soliman, Hany A. G., Mac-Thiong, Jean-Marc, Levasseur, Annie, Parent, Stefan et Petit, Yvan.
2017.
« Assessment of regional bone density in fractured vertebrae using quantitative computed tomography ».
Asian Spine Journal, vol. 11, nº 1.
pp. 57-62.
Sow, A. et Rousse, D. R..
2017.
« Comparaison de l'implantation photovoltaïque au Canada entre 2013 et 2016 ».
In XIIIeme Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (CIFQ) (Saint-Lô, France, 22-23 mai 2017)
Stanescu, M., Kajl, S., Aberkane, K. et Lamarche, L..
2017.
« Optimisation énergétique des systèmes CVCA dans la conception préliminaire incluant l'empreinte au sol du bâtiment ».
In XIIIeme Colloque Inter-universitaire Franco-Québécois (CIFQ) (Saint-Lô, France, 22-24 mai 2017)
Stinville, J. C., Echlin, M. P., Callahan, P. G., Miller, V. M., Texier, D., Bridier, F., Bocher, P. et Pollock, T. M..
2017.
« Measurement of strain localization resulting from monotonic and cyclic loading at 650C in nickel base superalloys ».
Experimental Mechanics, vol. 57, nº 8.
pp. 1289-1309.
Sun, Binhan, Vanderesse, Nicolas, Fazeli, Fateh, Scott, Colin, Chen, Jianqiang, Bocher, Philippe, Jahazi, Mohammad et Yue, Stephen.
2017.
« Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel ».
Scripta Materialia, vol. 133.
pp. 9-13.
Sylla, Abdourahim, Vareilles, Elise, Coudert, Thierry, Aldanondo, Michel, Geneste, Laurent et Beauregard, Yvan.
2017.
« ETO bid solutions definition and selection using configuration models and a multi-criteria approach ».
In IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Singapore, Dec. 10-13, 2017)
pp. 1833-1837.
Piscataway, NJ, USA : IEEE.
Terriault, Patrick et Brailovski, Vladimir.
2017.
« Influence of boundary conditions on the simulation of a diamond-type lattice structure: A preliminary study ».
Advances in Materials Science and Engineering, vol. 2017.
Terroir, Jonathan, Doutres, Olivier et Sgard, Franck.
2017.
« Towards a "global" definition of the comfort of earplugs ».
In INTER-NOISE and NOISE-CON Congress and Conference (InterNoise17) (Hong Kong, China, Aug. 27-30, 2017)
Coll. « INTER-NOISE and NOISE-CON Congress and Conference Proceedings », vol. 7.
pp. 108-114.
Ingenta.
Thakare, Dhawal R., Abid, Alexandre, Pereira, Daniel, Fernandes, Julio, Belanger, Pierre et Rajagopal, Prabhu.
2017.
« Semi-analytical finite-element modeling approach for guided wave assessment of mechanical degradation in bones ».
International Biomechanics, vol. 4, nº 1.
pp. 17-27. Thibault, Denis, Meimandi, Shilan, Vanderesse, Nicolas, Bocher, Philippe, Viens, Martin, Brochu, Myriam et Gagnon, Martin. 2017. « Linking defects found by non-destructive testing in stainless steel castings to the fatigue analysis of hydraulic turbines ». Communication lors de la conférence : 3rd International Symposium on Fatigue Design and Material Defects (FDMD) (Lecco, Italy, Sept. 19-22, 2017).
Thomas, Marc et Laville, Frédéric.
2017.
« Simulation des vibrations mécaniques par Matlab, Simulink et Ansys ».
2e édition.
Québec ; Montréal : Presses de l'Université du Québec ; École de technologie supérieure. 700 p.
Toledano, Alvaro, Morency, François, Weiss, Julien, Broughton, Cabot et Benmeddour, Ali.
2017.
« Study of the subsonic wall interference in stall of the NASA CRM at the NRC 1.5 m trisonic wind tunnel ».
In 33rd AIAA Aerodynamic Measurement Technology and Ground Testing Conference (Denver, CO, USA, June 05-09, 2017)
Coll. « AIAA Paper », vol. AIAA 2017-4130.
AIAA.
Tongne, Amèvi, Desrayaud, Christophe, Jahazi, Mohammad et Feulvarch, Eric.
2017.
« On material flow in friction stir welded al alloys ».
Journal of Materials Processing Technology, vol. 239.
pp. 284-296. Touani, F., Der-Sarkissian, S., Noiseux, N. et Lerouge, S.. 2017. « Optimisation de la viabilité des cellules souches mésenchymateuses dans un hydrogel injectable par un court traitement pharmacologique ». Affiche présentée lors de la conférence : 5e Journée Universitaire du Département de Radiologie, Radio-oncologie et Médecine Nucléaire (Montréal, QC, Canada, 16 fév. 2017). Touani, F., DerSarkissian, S., Noiseux, N. et Lerouge, S.. 2017. « Pharmacological preconditioning improves viability and paracrine activities of hydrogel encapsulated mesenchymal stem cells ». Affiche présentée lors de la conférence : 2017 Till & McCullogh Meetings (TMM2017) (Mont-Tremblant, QC, Canada, Nov. 06-08, 2017). Touani, Francesco K., DerSarkissian, S., Noiseux, N. et Lerouge, Sophie. 2017. « Viability enhancement of hydrogel encapsulated mesenchymal stem cells by a short pharmacological treatment ». Affiche numéro 114084 présentée lors de la conférence : 33rd Annual Meeting of the Canadian Biomaterials Society (CBS) (Winnipeg, MB, Canada, May 24-27, 2017).
Touazine, Heithem, Akab, Jordan, Jahazi, Mohammad, Tahan, Antoine, Jomaa, Walid et Bocher, Philippe.
2017.
« Modeling of the microstructure alteration induced by hard turning of Inconel 718 ».
International Journal of Advanced Manufacturing Technology, vol. 93, nº 9-12.
pp. 3705-3712.
Touazine, Heithem, Jahazi, Mohammad et Bocher, Philippe.
2017.
« Accurate determination of damaged subsurface layers in machined Inconel 718 ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 9-12.
pp. 3419-3427.
Tran, N. H., Le, C. et Ngo, A. D..
2017.
« Experimental investigation of speed control of hydraulic motor using proportional valve ».
In International Conference on System Science and Engineering (ICSSE) (Ho Chi Minh City, Vietnam, July 21-23, 2017)
pp. 330-335.
Piscataway, NJ, USA : IEEE.
Travaglini, Christophe, Bescond, Christophe, Viens, Martin et Belanger, Pierre.
2017.
« Feasibility of high frequency guided wave crack monitoring ».
Structural Health Monitoring, vol. 16, nº 4.
Triki, Ennouri, Nguyen-Tri, Phuong, Gauvin, Chantal et Vu-Khanh, Toan.
2017.
« Combined puncture and cutting of elastomer membranes: a fracture energy approach ».
Journal of Applied Polymer Science, vol. 134, nº 25.
Tu, Fubin, Delbergue, Dorian, Miao, Hongyan, Klotz, Thierry, Brochu, Myriam, Bocher, Philippe et Levesque, Martin.
2017.
« A sequential DEM-FEM coupling method for shot peening simulation ».
Surface and Coatings Technology, vol. 319.
pp. 200-212.
Twahir, Abdulhalim, Moustapha, Hany, Doré, Sylvie et Roy, François.
2017.
« A framework for an integrated turbine rotor design system ».
In Global Power and Propulsion Forum : Proceedings (Zurich, Switzerland, Jan. 16-18, 2017)
Global Power & Propulsion Society.
Urlea, V. et Brailovski, V..
2017.
« Electropolishing and electropolishing-related allowances for IN625 alloy components fabricated by laser powder-bed fusion ».
International Journal of Advanced Manufacturing Technology, vol. 92, nº 9-12.
pp. 4487-4499.
Urlea, V. et Brailovski, V..
2017.
« Electropolishing and electropolishing-related allowances for powder bed selectively laser-melted Ti-6Al-4V alloy components ».
Journal of Materials Processing Technology, vol. 242.
pp. 1-11.
Vafadar, Ali K., Bouzid, Abdel-Hakim et Ngô, Anh Dung.
2017.
« Effect of material anisotropy on the structural integrity of composite bolted flanged joints ».
In ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017)
American Society of Mechanical Engineers (ASME).
Valentin, Olivier, John, Sasha M. et Laville, Frédéric.
2017.
« Using auditory steady-state responses for measuring hearing protector attenuation ».
Noise and Health, vol. 19, nº 86.
pp. 1-9.
Valentin, Olivier et Laville, Frédéric.
2017.
« Using auditory steady-state responses for measuring hearing protector occlusion effect ».
Noise and Health, vol. 19, nº 91.
pp. 278-285.
Valentin, Olivier, Viallet, Guilhem et Voix, Jérémie.
2017.
« Eartrodes: Towards a wireless in-ear custom-fitted brain computer interface ».
[Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 45, nº 3.
pp. 142-143.
Velazquez, Oliverio E., Weiss, Julien et Morency, François.
2017.
« Preliminary investigation on stall characteristics of a regional BWB for low speed approach ».
In 35th AIAA Applied Aerodynamics Conference (Denver, CO, USA, June 05-09, 2017)
Coll. « AIAA Paper », vol. AIAA 2017-3738.
AIAA.
Viallet, Guilhem et Voix, Jérémie.
2017.
« Soundproof enclosure for audio applications : Acoustic performance of various 3D printed materials ».
In FormNext 2017 (Francfort, Allemagne, Nov. 14-17, 2017)
Vinches, L., Zemzem, M. et Hallé, S..
2017.
« Effects of sweat and 3D-deformation on the mechanical behaviour of nitrile rubber gloves ».
Progress in Rubber, Plastics and Recycling Technology, vol. 33, nº 4.
pp. 203-220. Vinches, Ludwig et Hallé, Stéphane. 2017. « L’exposition aux nanomatériaux : comment se protéger efficacement la peau ? ». Communication lors de la conférence : 39e Congrès Annuel de l'AQHSST : Prévenir au Quotidien, Nouveaux Enjeux, Nouveaux Défis! (Victoriaville, QC, Canada, 16-18 mai, 2017).
Vinches, Ludwig et Hallé, Stéphane.
2017.
« Protéger les travailleurs du froid : mieux comprendre pour mieux agir ».
Bulletin de Veille Scientifique, nº 32.
pp. 52-54.
Vinches, Ludwig et Hallé, Stéphane.
2017.
« Resistance of Type 5 chemical protective clothing against nanometric airborne particles: Behavior of seams and zipper ».
Journal of Occupational and Environmental Hygiene, vol. 14, nº 12.
pp. 939-946.
Vinches, Ludwig et Hallé, Stéphane.
2017.
« Toxicité de la cellulose nanométrique : des incertitudes persistent ».
Bulletin de Veille Scientifique, nº 31.
pp. 13-15.
Vinches, Ludwig, Zemzem, Mohamed, Hallé, Stéphane, Peyrot, Caroline, Wilkinson, Kevin J. et Tufenkji, Nathalie.
2017.
« An improved experimental methodology to evaluate the effectiveness of protective gloves against nanoparticles in suspension ».
Journal of Occupational and Environmental Hygiene, vol. 14, nº 7.
D95-D101.
Voix, Jérémie.
2017.
« Hearing protector fit-testing: Spectrum uncertainty budgets ».
[Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 45, nº 3.
pp. 154-155. Voix, Jérémie. 2017. « The ear beyond hearing : from smart earplug to in-ear brain computer interfaces ». Communication lors de la conférence : 24th International Congress on Sound and Vibration (ICSV24) (London, England, July 23-27, 2017).
Voix, Jérémie.
2017.
« The ear beyond hearing: From smart earplug to in-ear brain computer interfaces ».
In 24th International Congress on Sound and Vibration (ICSV 24) (London, England, July 23-27, 2017)
Vu, Ngoc-Hung, François, Vincent, Cuillière, Jean-Christophe et Pham, Xuan-Tan.
2017.
« Development of finite strain shell elements for multi-layered fiber-reinforced materials applied for non-rigid parts deformation during assembly process ».
In Design, Manufacturing and Applications of Composites : Proceedings of the Eleventh Joint Canada-Japan Workshop on Composites and the First Joint Canada-Japan-Vietnam Workshop on Composites August 2016, Ho Chi Minh, Vietnam (Ho Chi Minh, Vietnam, Aug. 08-12, 2016)
pp. 96-103.
DEStech publications.
Vu, Viet-Hung, Liu, Zhaoheng, Thomas, Marc et Hazel, Bruce.
2017.
« Modal analysis of a light-weight robot with a rotating tool installed at the end effector ».
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 231, nº 9.
pp. 1664-1676.
Wagnac, Eric, Aubin, Carl-Éric, Chaumoître, Kathia, Mac-Thiong, Jean-Marc, Ménard, Anne-Laure, Petit, Yvan, Garo, Anaïs et Arnoux, Pierre-Jean.
2017.
« Substantial vertebral body osteophytes protect against severe vertebral fractures in compression ».
PLoS ONE, vol. 12, nº 10.
Wang, Hui, Zhang, Lin, Li, Guoliang, Rogers, Kyle, Lin, Hongfei, Seers, Patrice, Ledan, Thomas, Ng, Siauw et Zheng, Ying.
2017.
« Application of uniform design experimental method in waste cooking oil (WCO) co-hydroprocessing parameter optimization and reaction route investigation ».
Fuel, vol. 210.
pp. 390-397.
Wang, Wei, Liu, Fei, Liu, Zhaoheng et Yun, Chao.
2017.
« Prediction of depth of cut for robotic belt grinding ».
International Journal of Advanced Manufacturing Technology, vol. 91, nº 1.
pp. 669-708.
Weiss, Julien, Jondeau, Emmanuel, Giani, Alain, Charlot, Benoit et Combette, Philippe.
2017.
« Static and dynamic calibration of a MEMS calorimetric shear-stress sensor ».
Sensors and Actuators, A: Physical, vol. 265.
pp. 211-216.
Weiss, Julien, Schwaab, Quentin, Boucetta, Yacine, Giani, Alain, Guigue, Celine, Combette, Philippe et Charlot, Benoit.
2017.
« Simulation and testing of a MEMS calorimetric shear-stress sensor ».
Sensors and Actuators, A: Physical, vol. 253.
pp. 210-217.
Wu, Qinghua, Maire, Marion, Lerouge, Sophie, Therriault, Daniel et Heuzey, Marie-Claude.
2017.
« 3D printing of microstructured and stretchable chitosan hydrogel for guided cell growth ».
Advanced Biosystems, vol. 1, nº 6.
Wyckaert, Pauline, Nadeau, Sylvie et Bouzid, Hakim.
2017.
« Analysis of risks of pressure vessels ».
In Gesellschaft für Arbeitswissenschaft : Soziotechnische Gestaltung des digitalen Wandels – kreativ, innovativ, sinnhaft (Zurich, Suisse, Fev. 15-17, 2017)
Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 63.
GFA Press.
Xu, Jinke, Tam, Mifong, Samaei, Sepideh, Lerouge, Sophie, Barralet, Jake, Stevenson, Mary M. et Cerruti, Marta.
2017.
« Mucoadhesive chitosan hydrogels as rectal drug delivery vessels to treat ulcerative colitis ».
Acta Biomaterialia, vol. 48.
pp. 247-257.
Yakhya, Saleh et Morency, François.
2017.
« CFD investigation of turbulent heat transfer from a hot jet used for aircraft ground de-icing ».
In 63rd Aeronautics Conference : AERO2017 Proceedings (Toronto, ON, Canada, May 16-18, 2017)
Canadian Aeronautics and Space Institute.
Yakhya, Saleh et Morency, Francois.
2017.
« Numerical study of momentum and heat transfer in propylene glycol jets used for aircraft ground deicing ».
In 23rd AIAA Computational Fluid Dynamics Conference (Denver, CO, USA, June 05-09, 2017)
Coll. « AIAA Paper », vol. AIAA 2017-4504.
AIAA.
Zaabar, I., Beauregard, Y. et Paquet, M..
2017.
« Evaluation and validation of a maturity model in obsolescence management for increased performances ».
In 38th International Annual Conference of the American Society for Engineering Management (ASEM 2017) (Huntsville, AL, USA, Oct. 18-21, 2017)
pp. 701-707.
ASEM.
Zarour, Djamal, Meziani, Salim, Kedadouche, Mourad et Thomas, Marc.
2017.
« Faulty bearing features by variational mode decomposition ».
In 30th JVE International Conference (Phuket, Thailand, Dec. 16-17, 2017)
Coll. « Vibroengineering PROCEDIA », vol. 16.
pp. 29-34.
JVE international.
Zehtabi, Fatemeh, Dumont-Mackay, Vincent, Fatimi, Ahmed, Bertrand-Grenier, Anthony, Héon, Hélène, Soulez, Gilles et Lerouge, Sophie.
2017.
« Chitosan–sodium tetradecyl sulfate hydrogel: Characterization and preclinical evaluation of a novel sclerosing embolizing agent for the treatment of endoleaks ».
CardioVascular and Interventional Radiology, vol. 40, nº 4.
pp. 576-584.
Zehtabi, Fatemeh, Ispas-Szabo, Pompilia, Djerir, Djahida, Sivakumaran, Lojan, Annabi, Borhane, Soulez, Gilles, Mateescu, Mircea Alexandru et Lerouge, Sophie.
2017.
« Chitosan-doxycycline hydrogel: An MMP inhibitor/sclerosing embolizing agent as a new approach to endoleak prevention and treatment after endovascular aneurysm repair ».
Acta Biomaterialia, vol. 64.
pp. 94-105. Zemzem, M., Hallé, S. et Vinches, L.. 2017. « Amélioration de l'imperméabilité aux solvants d'un film en nitrile par ajout de nanoparticules d'argile ». Affiche présentée lors de la conférence : 39e Congrès de l'Association Québécoise pour l'Hygiène, la Santé et la Sécurité du Travail (AQHSST) (Victoriaville, QC, Canada, 16-18 mai 2017). Zemzem, M., Hallé, S. et Vinches, L.. 2017. « Optimisation des propriétés barrières d'un matériau nanocomposite en nitrile chargé par des nanoargiles ». Affiche présentée lors de la conférence : Expo Hightex (Montréal, QC, Canada, 04-05 avril 2017).
Zemzem, Mohamed, Vinches, Ludwig et Hallé, Stéphane.
2017.
« Sorption and diffusion of gold and silver nanoparticles in solution through nitrile rubber membrane ».
Journal of Applied Polymer Science, vol. 134, nº 39.
Zemzem, Mohamed, Vinches, Ludwing et Hallé, Stéphane.
2017.
« Diffusion of nanoparticles in solution through elastomeric membrane ».
In Applied Nanotechnology and Nanoscience International Conference 2016 (ANNIC) (Barcelona, Spain, Nov. 09-11, 2016)
Coll. « Journal of Physics: Conference Series », vol. 829.
IOP Publishing. Zhang, C., Shahriari, D., Loucif, A., Lapierre-Boire, L. -Ph., Tremblay, R., Melkonyan, H. et Jahazi, M.. 2017. « Influence des paramètres de coulée sur la macroségrégation des aciers à haute résistance mécanique dans les lingots de grande taille: expérimentation et modélisation ». Affiche présentée lors de la conférence : ASM-Montreal Student Night (Montreal, QC, Canada, March 15, 2017).
Zhang, Chunping P., Shahriari, Davood, Loucif, Abdelhalim, Jahazi, Mohammad, Lapierre-Boire, Louis-Philippe et Tremblay, Rami.
2017.
« Effect of segregated alloying elements on the high strength steel properties: Application to the large size ingot casting simulation ».
In TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings (San Diego, CA, USA, Feb. 26-Mar. 02, 2017)
Coll. « Minerals Metals & Materials Series »
pp. 491-500.
Springer International Publishing.
Zhang, Chunping, Shahriari, Davood, Loucif, Abdelhalim, Jahazi, Mohammad, Lapierre-Boire, Louis-Philippe et Tremblay, Rami.
2017.
« Effect of thermo-physical properties on solidification behavior of large size high strength steel ingots ».
In 7th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (SteelSim) (Qingdao, China, Aug. 16-17, 2017)
The Chinese Society for Metals.
Zhao, Zijian, Kanthabhabha Jeya, Rahul Palaniappan et Bouzid, Abdel-Hakim.
2017.
« Creep modeling of polyvinyl chloride bolted flange joints ».
In ASME 2017 International Mechanical Engineering Congress and Exposition (IMECE 2017) (Tampa, FL, USA, Nov. 03-09, 2017)
American Society of Mechanical Engineers.
Zhu, Linbo, Bouzid, Abdel-Hakim et Hong, Jun.
2017.
« Analytical modelling of elastic interaction in bolted flange gasketed joints ».
In ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017)
American Society of Mechanical Engineers (ASME).
Zhu, Linbo, Bouzid, Abdel-Hakim et Hong, Jun.
2017.
« Numerical and experimental study of elastic interaction in bolted flange joints ».
Journal of Pressure Vessel Technology, vol. 139, nº 2.
Zinsalo, Joël M. et Lamarche, Louis.
1 mai 2017.
« Electricity Generation from Deep Geothermal Energy ».
[Article de recherche]. Substance ÉTS.
Zinsalo, Joël M. et Lamarche, Louis.
1 mai 2017.
« Produire de l’électricité par géothermie profonde ».
[Article de recherche]. Substance ÉTS.
|
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau