L'affiliation est "Génie mécanique"

Groupement par Professeur | Année | Type de document | Sans groupement

Nombre de documents archivés : 265.

Ahmadi, Ali

Shi, Jiahao, Ju, Kang, Chen, Haoyu, Orsat, Valerie, Sasmito, Agus P., Ahmadi, Ali et Akbarzadeh, Abdolhamid. 2025. « Ultrahigh piezoelectricity in truss-based ferroelectric ceramics metamaterials ». Advanced Functional Materials, vol. 35, nº 12.

Aissaoui, Rachid

Pelletier-Huot, Maxime, Duval, Hélène, Rochette, Audrey, Imran, Ali, Braga, Rafael, Bouteiller, Yann, Varadharajan, Vivek Shankar, Beltrame, Giovanni, Abdalwhab Bakheet, Mohamed Abdalwhab, Aissaoui, Rachid et St-Onge, David. 2025. « DESSAIM ». In IEEE International Conference on Robotics and Automation (ICRA) (Atlanta, GA, USA, May 19-23, 2025)
(Sous presse)

Al Haddad, Kamal

Ibrahim, Rony, Zemouri, Ryad, Tahan, Antoine, Kedjar, Bachir, Merkhouf, Arezki et Al-Haddad, Kamal. 2025. « Early detection of rotor faults in large hydrogenerators using vibration measurements, variational autoencoder, and euclidean distance ». IEEE Transactions on Industry Applications.
(Sous presse)

Bocher, Philippe

Austernaud, Y., Novelli, M., Grosdidier, T. et Bocher, P.. 2025. « Enhancing fatigue performance of austenitic stainless steel via warm surface severe plastic deformation using surface mechanical attrition treatment ». International Journal of Fatigue, vol. 201.

Austernaud, Y., Novelli, M., Kauffmann, T. H., Bocher, P. et Grosdidier, T.. 2025. « Surface contamination induced by warm severe surface peening using 100C6 steel and ZrO2 shots ». Materials Letters: X, vol. 26.

Austernaud, Yann, Novelli, Marc, Bocher, Philippe et Grosdidier, Thierry. 2025. « Effect of shot peening temperature on the microstructure induced by surface severe plastic deformation on an austenitic stainless steel ». Journal of Materials Processing Technology, vol. 339.
Compte des citations dans Scopus : 3.

Bretin, R. et Bocher, P.. 2025. « Neighborhood and surface effects on polycrystal stress field extreme values: An analysis in linear elastic range by means of cellular automaton ». International Journal of Fatigue, vol. 192.

Jomaa, Walid, Daoud, Monzer, Javadi, Hamid et Bocher, Philippe. 2025. « Cutting fluid effectiveness in the high-speed finish machining of Inconel 718 using a whisker-reinforced ceramic tool ». Journal of Manufacturing and Materials Processing, vol. 9, nº 4.

Serre, Rémy, Nadot-Martin, Carole et Bocher, Philippe. 2025. « Equivalent Inclusion Method (EIM) for isotropic and anisotropic spatially oriented spheroidal inhomogeneities: A unified calculation module validated via comparisons to Finite Element (FE) simulations ». Mechanics of Materials, vol. 201.
Compte des citations dans Scopus : 1.

Boton, Conrad

Khan, Numan, Nadeau, Sylvie, Pham, Xuan-Tan et Boton, Conrad. 2025. « Toward a decision support system for a toolbox meeting pertaining to roofing activities in construction ». In Proceedings of the Canadian Society for Civil Engineering Annual Conference 2023 : Construction Track (Moncton, NB, Canada, May 24-27, 2023) Coll. « Lecture Notes in Civil Engineering », vol. 498. pp. 275-286. Springer Cham.

Bouserhal, Rachel

Benesch, Danielle, Villatte, Bérangère, Vinet, Alain, Hébert, Sylvie, Voix, Jérémie et Bouserhal, Rachel E.. 2025. « Stress classification with in-ear heartbeat sounds ». Computers in Biology and Medicine, vol. 186.
Compte des citations dans Scopus : 1.

Bouzid, Hakim

Bouzid, Abdel-Hakim. 2025. « On the analytical modeling of autofrettaged cylinders subjected to bauschinger and softening effects ». Journal of Pressure Vessel Technology, vol. 147, nº 6.

Hakimian, Soorosh, Bouzid, Abdel-Hakim et Hof, Lucas A.. 2025. « Effect of gap size on flange face corrosion ». Materials and Corrosion-Werkstoffe Und Korrosion, vol. 76, nº 6. pp. 833-850.
Compte des citations dans Scopus : 3.

Hakimian, Soroosh, Bouzid, Abdel-Hakim et Hof, Lucas A.. 2025. « Corrosion type identification in flanged joints using recurrent neural networks on electrochemical noise measurements ». npj Materials Degradation, vol. 9, nº 1.

Rousseau, Rashique Iftekhar et Bouzid, Abdel-Hakim. 2025. « Effect of clamped member material and thickness on bolt self-loosening under transverse loads ». Materials, vol. 18, nº 2.

Brailovski, Vladimir

Bellavance, Xavier, Leclercq, Aurore, Mouret, Thibault, Landry-blais, Alexandre, Picard, Mathieu et Brailovski, Vladimir. 2025. « Micro-mixing injector manufacturing in refractory metal using laser powder bed fusion process ». In ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (Memphis, TN, USA, June 16-20, 2025) American Society of Mechanical Engineers (ASME).

Carillo, K., Pires, L., Padois, T., Brailovski, V. et Doutres, O.. 2025. « Enhancing low-frequency transmission loss in aircraft fuselage sidewalls with a flat array of covered Helmholtz resonators metamaterial ». Aerospace Science and Technology, vol. 166.

Desrosiers, Catherine, Letenneur, Morgan, Bernier, Fabrice, Piche, Nicolas, Provencher, Benjamin, Cheriet, Farida, Guibault, François et Brailovski, Vladimir. 2025. « Automated porosity segmentation in laser powder bed fusion part using computed tomography: A validity study ». Journal of Intelligent Manufacturing, vol. 36, nº 2. pp. 1341-1361.
Compte des citations dans Scopus : 6.

Leclercq, Aurore, Czech, Anna, Mouret, Thibault, Lis, Marcin, Wrona, Adriana et Brailovski, Vladimir. 2025. « Molybdenum 8wt% rhenium alloy processed by laser powder bed fusion: From powder production to mechanical testing at elevated temperatures ». International Journal of Refractory Metals and Hard Materials, vol. 132.
Compte des citations dans Scopus : 1.

Leclercq, Aurore, Mouret, Thibault et Brailovski, Vladimir. 2025. « Laser powder bed fusion of molybdenum: Density, structure and mechanical properties at room and elevated temperatures ». Materials Science and Engineering: A, vol. 929.
Compte des citations dans Scopus : 3.

Sheremetyev, V., Lezin, V., Lukashevich, K., Prokoshkin, S. et Brailovski, V.. 2025. « Improving superelasticity of a laser powder bed-fused Ti-Zr-Nb alloy via the ingot composition adjustments ». Materials Letters, vol. 398.

Turnier Trottier, William, Collin, Antoine, Krick, Thierry et Brailovski, Vladimir. 2025. « LPBF-Produced elastomeric lattice structures for personal protection equipment: Mechanical performance versus comfort-related attributes ». Journal of Manufacturing and Materials Processing, vol. 9, nº 6.

Valtchanov, Hristo, Piche, Nicolas, Brailovski, Vladimir, Byers, Justin, Desrosiers, Catherine et Guibault, Francois. 2025. « Accurate reconstruction of gas turbine blade geometry using 3D/2D rigid-registration and CT view optimization ». e-Journal of Nondestructive Testing, vol. 30, nº 2.

Bélanger, Pierre

Antoine, C., Pierre, B., Guillaume, P. et Alain, L.. 2025. « Creating schematic representation of corrosion using CGAN and ultrasonic imaging ». In SPIE Smart Structures + Nondestructive Evaluation (Vancouver, BC, Canada, Mar. 17-20, 2025) Coll. « Proceedings of SPIE », vol. 13438. SPIE.

Bélanger, Pierre et Latete, Thibault (inventeurs) 21 janvier 2025. « Ultrasonic testing for defect detection ». École de technologie supérieure (titulaire(s)). Brevet américain US 12,203,897.

Chaboty, Aubin, Nguyen, Vu-Hieu, Haiat, Guillame et Bélanger, Pierre. 2025. « Estimating the properties of bone phantom cylinders through the inversion of axially transmitted low-frequency ultrasonic guided waves ». Ultrasonics, vol. 155.

Lombard, Eloi et Bélanger, Pierre. 2025. « Characterization and classification of flaws in PAUT using a convolutional neural network ». In SPIE Smart Structures + Nondestructive Evaluation (Vancouver, BC, Canada, Mar. 17-20, 2025) Coll. « Proceedings of SPIE », vol. 13438. SPIE.

Paul, R., Pierre, B., Zhu, C. S., Alain, L. et Guillaume, P.. 2025. « Thickness gauging using a high-temperature electromagnetic acoustic transducer with optimized magnetic field ». In SPIE Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems (Vancouver, BC, Canada, Mar. 17-20, 2025) Coll. « Proceedings of SPIE », vol. 13435. SPIE.

Rasolonirina, Tony, Painchaud-April, Guillaume, Le Duff, Alain et Belanger, Pierre. 2025. « Visualization of specular reflections with phase coherence imaging using sub-apertures ». Ultrasonics, vol. 155.

Sendra, T. et Belanger, P.. 2025. « On the use of a Transformer Neural Network to deconvolve ultrasonic signals ». Ultrasonics, vol. 152.

Thibault, S. et Bélanger, P.. 2025. « Lite transformer for ultrasonic signal processing ». In SPIE Smart Structures + Nondestructive Evaluation (Vancouver, BC, Canada, Mar. 17-20, 2025) Coll. « Proceedings of SPIE », vol. 13438. SPIE.

Thon, Aurelien, Painchaud-April, Guillaume, Le Duff, Alain et Bélanger, Pierre. 2025. « U-NET autoencoder for amplitude recovery on binarized Full Matrix Captures ». NDT and E International, vol. 156.

Chaabane, Amin

Mejía-Moncayo, Camilo, Chaabane, Amin, Kenne, Jean-Pierre et Hof, Lucas A.. 2025. « Performance indicators for sustainable remanufacturing closed-loop supply chains ». In Accelerating the Socio-Ecological Transition: Strategies and Innovations for Sustainable Development. pp. 175-197. Cham : Springer Nature Switzerland.

Champliaud, Henri

Rajakrishnan, Navneeth, Sadeghifar, Morteza, Bhattacharjee, Pinaki, Champliaud, Henri et Jahazi, Mohammad. 2025. « Kinetics of austenite formation in a medium-carbon, low-alloy steel with an initial martensite microstructure: Influence of prior austenite grain size ». Journal of Manufacturing and Materials Processing, vol. 9, nº 1.
Compte des citations dans Scopus : 1.

Salazar, Gamaliel, Lemyre-Baron, Jean-Sébastien, Jahazi, Mohammad, Champliaud, Henri et Tahan, Antoine. 2025. « Analysis of geometry orientation in the calculation of transient heat fluxes during immersion quenching of hollow cylinder ». In QDE 2025: Proceedings of the 3rd International Conference on Quenching and Distortion Engineering (Vancouver, BC, Canada, May 06-07, 2025) pp. 133-140. ASM International.

Salazar, Gamaliel, Lemyre-Baron, Jean-Sébastien, Jahazi, Mohammad, Champliaud, Henri et Tahan, Antoine. 2025. « Determination of thermal boundary conditions using piecewise hermite polynomials during the air transfer step of an industrial quenching process ». Journal of Thermal Science and Engineering Applications, vol. 17, nº 9.

Chatelain, Jean-François

Slamani, Mohamed, Elhadi, Abdelmalek, Amroune, Salah, Arslane, Mustapha, Alothman, Othman Y., Awayssa, Omar, Chatelain, Jean-François et Jawaid, Mohammad. 2025. « Analysis of entry and exit hole delaminations during drilling of jute/palm fiber reinforced hybrid composites using HSS drill bits ». Journal of Natural Fibers, vol. 22, nº 1.
Compte des citations dans Scopus : 1.

Slamani, Mohamed, Elhadi, Abdelmalek, Amroune, Salah, Arslane, Mustapha, Zaoui, Moussa, Alrasheedi, Nashmi, Louhichi, Borhen et Chatelain, Jean-François. 2025. « Bootstrap analysis for predicting circularity and cylindricity errors in palm/jute fiber reinforced hybrid composites ». Measurement: Journal of the International Measurement Confederation, vol. 249.
Compte des citations dans Scopus : 2.

Slamani, Mohamed, Jammel, Siwar et Chatelain, Jean-François. 2025. « Effects of wax and graphene concentrations on cutting force in drilling GFRP composites: A comprehensive study using a full factorial design of experiments ». Journal of Composite Materials.
(Sous presse)

D'Avignon, Katherine

Youssef, Farah, Hallé, Stéphane et D'Avignon, Katherine. 2025. « Modeling heat loss through sweating: Towards improved heat load prediction from child occupants ». Energy and Buildings, vol. 342.
Compte des citations dans Scopus : 1.

Dagdeviren, Omur

Guner, Bugrahan, Safikhani-Mahmoudi, Mohammad, Li, Fengmiao, Zou, Ke et Dagdeviren, Omur E.. 2025. « Ultraviolet irradiation penetration depth on TiO2 ». Communications Chemistry, vol. 8, nº 1.
Compte des citations dans Scopus : 3.

David, Éric

Bandeira de Souza, Ziani Santana, Araújo do Nascimento, Pedro Lucas, Samara, Mazen, David, Éric, Macedo Fechine, Guilhermino Jose, Alves da Motta Sobrinho, Mauricio et Demarquette, Nicole Raymonde. 2025. « Influence of graphene functionalization on the curing kinetics, dynamical mechanical properties and morphology of epoxy nanocomposites ». Polymer, vol. 320.
Compte des citations dans Scopus : 3.

Pinto, Gabriel M., Helal, Emna, Ribeiro, Hélio, David, Eric, Demarquette, Nicole R. et Fechine, Guilhermino J. M.. 2025. « Effect of environmental temperature and semi-crystalline order on the toughening of polyamide 1010 by 2D nanomaterials ». Polymer Composites, vol. 46, nº 1. pp. 715-734.
Compte des citations dans Scopus : 1.

Pinto, Gabriel M., Staffa, Lucas, Helal, Emna, Hahn, Carolina, Vieira, Lucia, Ribeiro, Hélio, David, Eric, Demarquette, Nicole R. et Fechine, Guilhermino J. M.. 2025. « Balancing thermal conductivity, dielectric, and tribological properties in polyamide 1010 with 2D nanomaterials ». Journal of Applied Polymer Science, vol. 142, nº 1.
Compte des citations dans Scopus : 1.

Sani, Iman Shirzaei, Demarquette, Nicole R. et David, Eric. 2025. « Enhancing the dielectric properties of recycled polyolefin streams through blending ». Sustainability, vol. 17, nº 9.

Tayefi, Masoud, Eesaee, Mostafa, Hassanipour, Meysam, Elkoun, Said, David, Eric et Nguyen-Tri, Phuong. 2025. « Thermal aging behavior and lifetime prediction of industrial elastomeric compounds based on styrene-butadiene rubber ». Polymer Engineering and Science.
Compte des citations dans Scopus : 1. (Sous presse)

Demarquette, Nicole R.

Aboud, Damon G. K., Demarquette, Nicole R., Rodrigue, Denis et Kietzig, Anne-Marie. 2025. « Considering microtexture geometry to improve micro-injection molding fidelity ». Journal of Micromechanics and Microengineering, vol. 35, nº 6.

Côté, Raphaël, Delbergue, Dorian, Demers, Vincent, Demarquette, Nicole R., Charlon, Sébastien et Soulestin, Jérémie. 2025. « Influence of process parameters on the occurrence of defects and dimensional properties of green part produced by material extrusion of highly filled polymer ». Progress in Additive Manufacturing, vol. 10, nº 1. pp. 409-425.
Compte des citations dans Scopus : 1.

de Carvalho Arjona, Jéssica, Samara, Mazen, Ulsen, Carina, Valenzuela Diaz, Francisco Rolando et Demarquette, Nicole Raymonde. 2025. « Isoniazid adsorption and release by Cloisite and Laponite: An effect of surface charge ». Materials Chemistry and Physics, vol. 344.

de Carvalho Arjona, Jessica, Ulsen, Carina, Tada, Dayane, Valenzuela Diaz, Francisco Rolando et Demarquette, Nicole Raymonde. 2025. « The influence of adsorption incorporation mechanism on the release of isoniazid by montmorillonite ». Journal of Drug Delivery Science and Technology, vol. 108.
Compte des citations dans Scopus : 1.

Ferreira Junior, José Carlos, Triki, Ennouri, Doutres, Olivier, Demarquette, Nicole R. et Hof, Lucas A.. 2025. « Recyclable polyester textile waste-based composites for building applications in a circular economy framework ». Journal of Cleaner Production, vol. 515.

Sani, Iman Shirzaei, Demarquette, Nicole R. et David, Eric. 2025. « Enhancing the dielectric properties of recycled polyolefin streams through blending ». Sustainability, vol. 17, nº 9.

Demers, Vincent

Doutres, Olivier

Bezançon, Gauthier, Doutres, Olivier, Umnova, Olga, Leclaire, Philippe et Dupont, Thomas. 2025. « Experimental analysis of metamaterial with improved high sound levels absorption using complex frequency plane ». Applied Acoustics, vol. 231.
Compte des citations dans Scopus : 5.

Bezançon, Gauthier, Lopez, Maël, Doutres, Olivier, Panneton, Raymond et Dupont, Thomas. 2025. « Low-frequency absorption band in a thin acoustic metamaterial using acoustic black hole termination ». Applied Acoustics, vol. 233.
Compte des citations dans Scopus : 1.

Carillo, Kévin, Sgard, Franck, Dazel, Olivier et Doutres, Olivier. 2025. « Enhancing acoustic comfort for earplug users: Objective and subjective evaluation of bone-conducted sound with meta-earplugs incorporating Helmholtz resonators ». Applied Acoustics, vol. 240.

Doutres, Olivier, Luan, Yu, Cyr-Desroches, Marc-Olivier, Carillo, Kévin, Richert, Robin et Sgard, Franck. 2025. « On the design of an acoustical test fixture for assessing the objective occlusion effect ». Applied Acoustics, vol. 228.
Compte des citations dans Scopus : 2.

Negrini, A., Gauvin, C., Berbiche, D., Terroir, J., Perrin, N., Jolly, C., Martin, L., Sgard, F. et Doutres, O.. 2025. « Development and validation of the North American COmfort of hearing PROtection Device questionnaire (COPROD-NAQ) ». Safety Science, vol. 181.

Poissenot-Arrigoni, Bastien, Martin, Laurence, Negrini, Alessia, Berbiche, Djamal, Doutres, Olivier et Sgard, Franck. 2025. « Reliability of an extended version of the 3m™ Eargage tool to assess earcanal size and assist earplug selection ». International Journal of Audiology, vol. 64, nº 4. pp. 392-401.

Dubé, Martine

Gunther, Jason, Girard, Mélanie, Dubé, Martine et Tabiai, Ilyass. 2025. « A study on the influence of polypropylene melt flow index on nonwoven fibers produced through hot melt centrifugal spinning ». Journal of Manufacturing Science and Engineering, vol. 147, nº 4.

Jean-Fulcrand, Annelise, Léger, Ewen, Dau, Frederic, Dube, Martine et Tabiai, Ilyass. 2025. « Degradation mechanisms of CF/PPS, CF/PEI, and CF/PEEK under combined UV radiation and condensation ». Composites Part A: Applied Science and Manufacturing, vol. 198.

Martin, R. G., Jonasson, C., Johansson, C., Tavares, J. R. et Dubé, M.. 2025. « 3D-printing magnetic susceptor filament for induction welding of thermoplastic composite sandwich panels ». Composites Communications, vol. 55.

Moazen, S., Gosselin, F. P., Tabiai, I. et Dubé, M.. 2025. « 3D printing LDPE/lunar regolith simulant composite: Manufacturing with in-situ resources on the moon ». Acta Astronautica, vol. 237. pp. 409-420.

Shokrollahi, Maryam, Smith, Adam W., Levy, Arthur, Dubé, Martine et Tabiai, Ilyass. 2025. « Reassessing anisotropy in 3D printed structures: The role of extrudate geometry vs interface bonding ». Journal of Manufacturing Processes, vol. 149. pp. 456-472.

Smith, A. W., Pattery, H., Canart, J. P., Tabiai, I. et Dubé, M.. 2025. « Upcycling of unidirectional carbon-fibre/PEEK prepreg trim waste ». Composites Part A: Applied Science and Manufacturing, vol. 198.

Dupont, Thomas

Gallerand, Lucie, Legrand, Mathias, Panneton, Raymond, Leclaire, Philippe et Dupont, Thomas. 2025. « Added nonlinear damping of homogenized fluid-saturated microperforated plates in Forchheimer flow regime ». Journal of Sound and Vibration, vol. 606.
Compte des citations dans Scopus : 1.

Lopez, Maël, Benchikh Le Hocine, Alla Eddine, Kone, Tenon Charly, Dupont, Thomas et Panneton, Raymond. 2025. « Inertial effects on single-perforation plates resistivity at high flow rates: Computational fluid dynamics and experimental studies ». Journal of the Acoustical Society of America, vol. 157, nº 2. pp. 1512-1522.
Compte des citations dans Scopus : 1.

Lopez, Maël, Kone, Tenon Charly, Benchikh Le Hocine, Alla Eddine, Dupont, Thomas et Panneton, Raymond. 2025. « Mass-spring model for a perforated periodic metamaterial in nonlinear regime ». Journal of the Acoustical Society of America, vol. 157, nº 4. pp. 3192-3203.
Compte des citations dans Scopus : 1.

Ebrahimi-Kahou, Samira

Azzaz, Riadh, Jahazi, Mohammad, Ebrahimi Kahou, Samira et Moosavi-Khoonsari, Elmira. 2025. « Prediction of final phosphorus content of steel in a scrap-based electric arc furnace using artificial neural networks ». Metals, vol. 15, nº 1.
Compte des citations dans Scopus : 1.

Moosavi-Khoonsari, Elmira, Azzaz, Riadh, Hurel, Valentin, Jahazi, Mohammad et Ebrahimi Kahou, Samira. 2025. « Controlling minor element phosphorus in green electric steelmaking using neural networks ». In REWAS 2025 : Circular Economy for the Energy Transition (Las Vegas , NV, USA, Mar. 23-27, 2025) Coll. « Minerals, Metals & Materials Series » pp. 297-305. Springer.

Gagnon, Ghyslain

Morelli, Laura, Sirtoli, Vinicius, Gagnon, Ghyslain et Zednik, Ricardo J.. 2025. « Analytical modeling and experimental validation of triboelectric behavior in Kirigami flexible capacitive sensors ». IEEE Transactions on Instrumentation and Measurement, vol. 74.

Garnier, François

Afkari, Parisa, Chouak, Mohamed, Cantin, Sébastien et Garnier, François. 2025. « Evaluating bypass effects of advanced turbofan engines on contrail formation using large eddy simulations ». Journal of Aircraft.
(Sous presse)

Cantin, S., Chouak, M. et Garnier, F.. 2025. « Effects of fuel sulfur content and nvPM emissions on contrail formation: A CFD-microphysics study including the role of organic compounds ». Journal of Aerosol Science, vol. 188.
Compte des citations dans Scopus : 1.

Guilbault, Raynald

Guilbault, Raynald. 2025. « S-EPSO: A socio-emotional particle swarm optimization algorithm for multimodal search in low-dimensional engineering applications ». Algorithms, vol. 18, nº 6.

Khaldi, Abdelhakim et Guilbault, Raynald. 2025. « An optimization strategy applied to identify the optimal powertrain configurations for efficient electric vehicles ». International Journal of Automotive Technology.
(Sous presse)

Haillot, Didier

Arasteh, Hossein, Kalivogui, Siba, Merabtine, Abdelatif, Maref, Wahid, Zhang, Kun, Durand, Sullivan, Turcotte, Patrick, Rousse, Daniel, Ilinca, Adrian, Haillot, Didier et Izquierdo, Ricardo. 2025. « Decarbonization strategies for Northern Quebec: Enhancing building efficiency and integrating renewable energy in off-grid indigenous communities ». Energies, vol. 18, nº 16.

Benisi Ghadim, H., Godin, A., Veillere, A., Duquesne, M. et Haillot, D.. 2025. « Review of thermal management of electronics and phase change materials ». Renewable and Sustainable Energy Reviews, vol. 208.
Compte des citations dans Scopus : 19.

Durand, Sullivan, Haillot, Didier et Rousse, Daniel. 2025. « Stockage d’énergie par pompage thermique multi-énergétique dans un contexte minier nordique ». Communication lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).

Durand, Sullivan, Neveu, Pierre, Rousse, Daniel R. et Haillot, Didier. 2025. « Comparative study of the discharge architecture for a multi-energy pumped thermal energy storage system using finite dimension thermodynamics ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Durand, Sullivan, Turcotte, Patrick, Haillot, Didier, Rousse, Daniel, Arasteh, Hossein, Kalivogui, Siba, Zhang, Kun, Izquierdo, Ricardo, Merabtine, Abdelatif, Maref, Wahid et Ilinca, Adrian. 2025. « Decarbonization strategies for northern Canada: A review of renewable energy and energy storage in off-grid communities ». Energy Conversion and Management: X, vol. 27.
Compte des citations dans Scopus : 2.

Haillot, Didier, Chauvette, Sam, Menguy, Emile, Arrabie, Cédric, Roy, Audrey, Chevassus, Guilhem et Gibout, Stéphane. 2025. « Agriculture nordique : Du cas d’étude de la serre de Kuujjuaq à la création d’un laboratoire de bonne pratique ». Communication lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).

Sylvain, William, Haillot, Didier et Monfet, Danielle. 2025. « Regard sur les performances en agriculture en environnement contrôlé : Indicateurs clés et applications ». Communication lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).

Hallé, Stéphane

Alakhdar, M., Hallé, S. et Vinches, L.. 2025. « Wind’s impact on thermal resistance: Challenging existing standards ». Communication lors de la conférence : Institute of Textile Science (Montréal, QC, Canada, Mar. 18-19, 2025).

Alakhdar, Mostafa, Vinches, Ludwig et Hallé, Stéphane. 2025. « Assessing thermal resistance of a nonwoven textile under wind exposure: Challenging ISO 9920 with experimental insights ». Journal of Industrial Textiles, vol. 55.
Compte des citations dans Scopus : 1.

Mohamadi, P., Theurot, D., Hallé, S. et Vinches, L.. 2025. « Sex-based variations in body pressure mapping for sleeping bag applications ». Affiche présentée lors de la conférence : Institute of Textile Science (Montréal, QC, Canada, Mar. 18-19, 2025).

Mohamadi, Parian, Theurot, Dimitri, Hallé, Stéphane et Vinches, Ludwig. 2025. « Sex-specific variations in body pressure distribution across different sleep surfaces and positions ». Ergonomics.
(Sous presse)

Mortazavinejad, Seyyed Mohsen, Alakhdar, Mostafa, Vinches, Ludwig et Hallé, Stéphane. 2025. « A novel methodology for calculating thermal conductivity of natural hollow fibers with validation in nonwoven fabric structures ». International Communications in Heat and Mass Transfer, vol. 167, nº Part A.

Helal, Emna

Hof, Lucas

Boniface Awatcha, Willy, Nadeau, Sylvie et Hof, Lucas. 2025. « Circular economy in automotive disassembly: Challenges and opportunities for end-of-life vehicles ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montréal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Chandra Shekar, Arjun, Leclair, Jean-Philippe, Zitoune, Redouane et Hof, Lucas A.. 2025. « Surface engineering strategies for aerospace composite repairs: Machining and texturation of additive manufacturing parts by abrasive waterjet ». Wear, vol. 570.
Compte des citations dans Scopus : 1.

Chavanel-Precloux, Lucas, Maranzana, Roland et Hof, Lucas A.. 2025. « On the modular design application for the gas turbine sector: A performance optimization approach in the context of industry 4.0 ». Fluids, vol. 10, nº 3.

Ghodsian, Nooshin, Benfriha, Khaled, Olabi, Adel, Gopinath, Varun, Talhi, Esma, Hof, Lucas et Arnou, Aurélien. 2025. « MSOA: A modular service-oriented architecture to integrate mobile manipulators as cyber-physical systems ». Journal of Intelligent Manufacturing, vol. 36, nº 5. pp. 3207-3226.
Compte des citations dans Scopus : 2.

Leclair, Jean-Philippe, Strugova, Daria, Cree, Duncan et Hof, Lucas A.. 2025. « Evaluation and characterization of waste-derived eggshells as filler in polylactic acid filament feedstock for material extrusion additive manufacturing: A step towards circular manufacturing strategies ». Progress in Additive Manufacturing.
(Sous presse)

Pourrahimi, Shamim, Milanese, Julien, Habibnejad-Korayem, Mahdi, Bocher, Philippe et Hof, Lucas A.. 2025. « Impact of powder reuse on corrosion properties in Ti-6Al-4V alloy parts fabricated by laser beam powder bed fusion ». Progress in Additive Manufacturing.
(Sous presse)

Shekar, Arjun Chandra, Sawalmeh, Atef, Zitoune, Redouane et Hof, Lucas A.. 2025. « Optimization of surface texturing parameters in additively manufactured continuous fiber composites using abrasive waterjet technique for composite repair applications ». Composites Part A: Applied Science and Manufacturing, vol. 190.
Compte des citations dans Scopus : 2.

Zeinab Aliahmadi, Seyed, Jabbarzadeh, Armin et Hof, Lucas A.. 2025. « A multi-objective optimization approach for sustainable and personalized trip planning: A self-adaptive evolutionary algorithm with case study ». Expert Systems with Applications, vol. 261.
Compte des citations dans Scopus : 7.

Ilinca, Adrian

Banijamali, Seyed Masoud, Ilinca, Adrian, Afrouzi, Ali Alizadeh et Rousse, Daniel R.. 2025. « Optimizing hydrogen liquefaction efficiency through waste heat recovery: A comparative study of three process configurations ». Processes, vol. 13, nº 5.

Benallal, Abdellah, Cheggaga, Nawal, Hebib, Amine et Ilinca, Adrian. 2025. « LSTM-based state-of-charge estimation and user interface development for lithium-ion battery management ». World Electric Vehicle Journal, vol. 16, nº 3.
Compte des citations dans Scopus : 1.

Bouterra, Sami, Belamadi, Riyadh, Djemili, Abdelouaheb et Ilinca, Adrian. 2025. « Microcylinder and slot combination for flow separation control over a wind turbine airfoil ». Wind Energy, vol. 28, nº 7.

Dahli, Khadidja, Ilinca, Adrian, Benallal, Abdellah, Cheggaga, Nawal et Allaoui, Tayeb. 2025. « Flocking-inspired solar tracking system with adaptive performance in varied environmental conditions ». Energies, vol. 18, nº 8.

El Mestari, Wahiba, Cheggaga, Nawal, Adli, Feriel, Benallal, Abdellah et Ilinca, Adrian. 2025. « Tuning parameters of genetic algorithms for wind farm optimization using the design of experiments method ». Sustainability, vol. 17, nº 7.
Compte des citations dans Scopus : 2.

Farazmandnia, Navid et Ilinca, Adrian. 2025. « Recyclable wind turbine blades: A life cycle analysis ». Materials, vol. 18, nº 16.

Monteiro, Amanda, Filho, A. V. M. L., Dantas, N. K. L., Castro, Jose, Arcanjo, Ayrlw Maynyson C., Rosas, Pedro A. C., Rodrigues, Perolla, Venerando, Augusto C., Spader, Newmar, Mohamed, Mohamed A., Ilinca, Adrian et Marinho, Manoel H. N.. 2025. « Integrating battery energy storage systems for sustainable EV charging infrastructure ». World Electric Vehicle Journal, vol. 16, nº 3.
Compte des citations dans Scopus : 1.

Moradi, Mehrdad et Ilinca, Adrian. 2025. « Analyzing wave dragon under different wave heights using flow-3D: A computational fluid dynamics approach ». Water, vol. 17, nº 5.

Robert, Armel, Bisulandu, Baby-Jean Robert Mungyeko, Ilinca, Adrian et Rousse, Daniel R.. 2025. « Hybrid wind-redox flow battery system for decarbonizing off-grid mining operations ». Applied Sciences, vol. 15, nº 13.

Sepahi, Nima, Ilinca, Adrian et Rousse, Daniel R.. 2025. « Multi-criteria decision analysis for evaluating carbon capture technologies in power plants ». Renewable and Sustainable Energy Reviews, vol. 219.
Compte des citations dans Scopus : 3.

Shahcheraghian, Amir, Ilinca, Adrian et Sommerfeldt, Nelson. 2025. « K-means and agglomerative clustering for source-load mapping in distributed district heating planning ». Energy Conversion and Management: X, vol. 25.
Compte des citations dans Scopus : 7.

Sokakini, Soumaya, Simo Tala, Jules Voguelin, Nadau, Lionel, Ilinca, Adrian et Bougeard, Daniel. 2025. « Heat transfer enhancement in shell and tube Latent Heat Thermal Energy Storage units for waste heat recovery applications: A 3D numerical study on melting–solidification kinetics ». Applied Thermal Engineering, vol. 274, nº Part B.
Compte des citations dans Scopus : 4.

Tardy, Adrien, Rousse, Daniel R., Mungyeko Bisulandu, Baby-Jean Robert et Ilinca, Adrian. 2025. « Enhancing energy sustainability in remote mining operations through wind and pumped-hydro storage; Application to Raglan Mine, Canada ». Energies, vol. 18, nº 9.
Compte des citations dans Scopus : 2.

Iordanova, Ivanka

Abdalwhab, Abdalwhab, Imran, Ali, Heydarian, Sina, Iordanova, Ivanka et St-Onge, David. 2025. « Are open-vocabulary models ready for detection of MEP elements on construction sites ». In 42nd International Symposium on Automation and Robotics in Construction (Montreal, QC, Canada, July 28-31, 2025)
(Sous presse)

Braga, Rafael Gomes, Tahir, Muhammad Owais, Karimi, Sina, Dah-Achinanon, Ulrich, Iordanova, Ivanka et St-Onge, David. 2025. « Intuitive BIM-aided robotic navigation and assets localization with semantic user interfaces ». Frontiers in Robotics and AI, vol. 12.

Izquierdo, Ricardo

Jahazi, Mohammad

Benazzouz, Lydia, Loucif, Abdelhalim, Brionne, Gary, Zhang, Chunping, Gallego, Paloma Isabel, Levesque, Jean-Benoit, Boutarek-Zaourar, Naima et Jahazi, Mohammad. 2025. « Assessing the influence of DSC parameters on accurate determination of liquidus and solidus temperatures of a medium carbon low-alloy steel ». Journal of Phase Equilibria and Diffusion, vol. 46, nº 1. pp. 119-132.

Chentouf, Samir Mourad, Grandmont, Philippe, Saadati, Mohammad, Amimer, Nora et Jahazi, Mohammad. 2025. « Influence of friction-stir-processing parameters on the microstructure and local mechanical properties of an aluminium-6% magnesium-H18 alloy ». Metals, vol. 15, nº 7.

Kaveh, Kianoosh, Barati, Mansoor, Jahazi, Mohammad et Moosavi-Khoonsari, Elmira. 2025. « Degradation mechanisms of magnesia-carbon refractories in radiation heat-affected wall of steel electric arc furnace ». Ceramics International.
(Sous presse)

Loucif, Abdelhalim, Shahriari, Davood, Chadha, Kanwal, Zhang, Chunping, Morin, Jean-Benoit et Jahazi, Mohammad. 2025. « Effect of cooling rate on the as-cast microstructure of a high strength steel produced in a large size ingot ». Key Engineering Materials, vol. 1016. pp. 9-14.

Meddas, Hamza Sofiane, Zorgani, Muftah, Heidari, Majid, Javidani, Mousa, Levasseur, Tom et Jahazi, Mohammad. 2025. « Crystallographic texture and precipitation control via double austenitization in high-performance tool steel ». Materials and Design, vol. 257.

Muhammed, Musa, Javidani, Mousa, Sadrabadi, Tahere Ebrahimi, Heidari, Majid, Levasseur, Tom et Jahazi, Mohammad. 2025. « Effect of layered architectural design on the tribological behaviour of AlTiN/AlTiCrN-based cathodic arc evaporated physical vapour deposition coatings ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
(Sous presse)

Nikbakht, R., Saadati, M., Kim, H. S., Jahazi, M. et Chromik, R. R.. 2025. « Multi-scale analysis of microstructural evolution and atomic bonding mechanisms in CoCrFeMnNi high-entropy alloys upon cold spray impact ». Journal of Materials Science and Technology, vol. 208. pp. 263-277.
Compte des citations dans Scopus : 5.

Omidi, Narges, Houria, Manel, Monjez, Mohamed Meher, Jahazi, Mohammad, Barka, Noureddine et Ouafi, Abderrazak El. 2025. « Processing parameters optimization for enhanced mechanical strength in PBF-ed H13 tool steel: Minimizing manufacturing defects including microstructural inhomogeneity, sub-surface porosities, and oxide formation ». International Journal of Advanced Manufacturing Technology, vol. 136, nº 5. pp. 2681-2706.
Compte des citations dans Scopus : 1.

Omidi, Narges, Iltaf, Asim, Houria, Manel, Jahazi, Mohammad, Barka, Noureddine et Belzile, Claude. 2025. « Enhancing mechanical properties of additively manufactured H13: A two-step approach integrating processing parameters optimization and a tailored heat treatment ». Metals and Materials International, vol. 31, nº 5. pp. 1286-1312.
Compte des citations dans Scopus : 2.

Tolouei, Ehsan, Hurel, Valentin, Loucif, Abdelhalim, Morin, Jean-Benoit et Jahazi, Mohammad. 2025. « Influence of the as-quenched state and tempering heating rate on microstructural characteristics of a high-strength steel ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
(Sous presse)

Tolouei, Ehsan, Saadati, Mohammad, Morin, Jean -Benoit, Garcia-Mateo, Carlos et Jahazi, Mohammad. 2025. « Influence of bainitic transformation temperature on microstructure evolution during isothermal holding and subsequent cooling ». Materials Chemistry and Physics, vol. 345.

Kenné, Jean-Pierre

Alix, Emma, Nadeau, Sylvie, Kenné, Jean-Pierre et Tahan, Antoine. 2025. « Les défis du désassemblage à l'ère de l'électrique dans l’industrie automobile ». Affiche présentée lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).

El Hamrani, Mouna, Benjelloun, Khalid, Kenne, Jean-Pierre, Maarouf, Saad et Elkhouakhi, Mohamed. 2025. « Advanced predictive process control for industrial thickeners ». In Proceedings of the International Conference on Simulation and Modeling Methodologies, Technologies and Applications (Bilbao, Spain, June 11-13, 2025) pp. 262-269. SciTePress.

Fattah, Rachid, Kenne, Jean-Pierre, Benjelloun, Khalid et Chebak, Ahmed. 2025. « Optimization of sliding mode control parameters to improve passenger comfort, road handling and reduce chattering in active electrohydraulic suspension systems ». In International Conference on Control, Automation and Diagnosis (ICCAD) (Barcelona, Spain, July 01-03, 2025) Institute of Electrical and Electronics Engineers Inc..

Fattah, Rachid, Kenne, Jean-Pierre, Benjelloun, Khalid et Chebak, Ahmed. 2025. « Optimization of the backstepping control parameters of an active electrohydraulic suspension to improve passenger comfort and road handling ». IEEE Access, vol. 13. pp. 35985-36005.

Laporte, Catherine

Dahmani, Jawad, Petit, Yvan et Laporte, Catherine. 2025. « Ultrasound imaging dataset for elastography, deformation correction, and algorithm evaluation ». In SPIE Medical Imaging 2025: Ultrasonic Imaging and Tomography (San Diego, CA, USA, Feb. 16-21, 2025) Coll. « Proceedings of SPIE », vol. 13412. SPIE.

Lemaire, Romain

Kamdem, Brice Martial, Lemaire, Romain et Nikiema, Josiane. 2025. « Insight into the production factors influencing the physicochemical properties of densified briquettes comprising wood shavings and rice husk ». Industrial Crops and Products, vol. 223.
Compte des citations dans Scopus : 1.

Rainville, Carl, Lemaire, Romain, Laflamme, Simon, Souno, Ibrahima et Seers, Patrice. 2025. « Sooting tendency of a series of kerosene surrogates and blends containing various additives considered as sustainable alternative fuels ». Energy & Fuels, vol. 39, nº 14. pp. 6991-7011.

Lerouge, Sophie

Touani, Francesco K., Hamouda, Inès, Noiseux, Nicolas, Hoesli, Corinne, Sarkissian, Shant Der et Lerouge, Sophie. 2025. « Injectable, cryopreservable mesenchymal stromal cell-loaded microbeads for pro-angiogenic therapy: In vitro proof-of-concept ». Biomedical Materials, vol. 20, nº 1.

Liu, Zhaoheng

Seyed Hosseini, Seyed Hamed, Hajzargarbashi, Seyedhossein et Liu, Zhaoheng. 2025. « Enhancing robotic manipulator performance through analyzing vibration, identifying deep-learning-based modal parameters, and estimating frequency response functions ». International Journal of Advanced Manufacturing Technology.
(Sous presse)

Vu, Viet-Hung, Huynh, Liem, Chaudhry, Shubham et Liu, Zhaoheng. 2025. « Experimental and numerical modal analysis of a honeycomb panel for aircraft structures application ». In ASME 2025 Aerospace Structures, Structural Dynamics, and Materials Conference (Houston, TX, USA, May 05-07, 2025) American Society of Mechanical Engineers (ASME).

Maranzana, Roland

Maref, Wahid

Merabtine, Abdelatif

Monfet, Danielle

Moosavi-Khoonsari, Elmira

Arias-Hernandez, Jesus Alejandro, Kwon, Sun Yong et Moosavi-Khoonsari, Elmira. 2025. « Application of polyhedron model to predict heat capacity of mixed oxides ». Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, vol. 89.

Hernandez, Jesus A. Arias et Moosavi-Khoonsari, Elmira. 2025. « Modified polyhedron model for predicting standard enthalpy of formation and entropy of mixed oxides ». Calphad-Computer Coupling of Phase Diagrams and Thermochemistry, vol. 90.

Moosavi-Khoonsari, Elmira, Dogan, Neslihan, Schrama, Frank N. H., Guerra, Fernando B. et Gu, Kezhuan. 2025. « Desulfurization challenges in the transition to green steel production ». In AISTech - Iron and Steel Technology Conference Proceedings (Nashville, TN, USA, May 05-08, 2025) pp. 859-868. Association for Iron and Steel Technology.

Nadeau, Sylvie

Djefour, Djoher, Nadeau, S. et Landau, K.. 2025. « Analyse des interfaces homme-outil : comprendre les paramètres clés de ces interfaces - étude exploratoire avec un gant de données (VMG30) ». Communication lors de la conférence : Congrès annuel AQHSST (Drummondville, QC, Canada, 21-22 mai 2025).

Djefour, Djoher, Nadeau, Sylvie et Landau, Kurt. 2025. « Digital Human Modeling for long, and low-volume assembly processes: Gas turbine assembly case study ». Open Journal of Safety Science and Technology, vol. 15, nº 3.

Karevan, Ali et Nadeau, Sylvie. 8 septembre 2025. « Making Manufacturing Smarter, Safer and More Sustainable ». [Article de recherche]. Substance ÉTS.

Karevan, Ali et Nadeau, Sylvie. 8 septembre 2025. « Rendre l’assemblage/désassemblage plus intelligent, plus sûr et plus durable ». [Article de recherche]. Substance ÉTS.

Nadeau, Sylvie. 2025. « Expérimentations en HF/E pour la réalité augmentée ou mixte : comment définir la complexité d’assemblage/désassemblage ». Communication lors de la conférence : Congrès annuel AQHSST (Drummondville, QC, Canada, 21-22 mai 2025).

Valdesse Eko'Ola, V. et Nadeau, S.. 2025. « Systematic selection of visual and cognitive assistance equipment: Case of gas turbine assembly in narrow spaces ». Intelligent control and automation, vol. 16, nº 3. pp. 80-109.

Nikiema, Josiane

Petit, Yvan

Bailly, Nicolas, Schäuble, Andreas, Guesneau, Marianne, Wei, Wei et Petit, Yvan. 2025. « Assessing bicycle helmet protection for head and neck in E-scooter falls ». Traffic Injury Prevention.
(Sous presse)

Bailly, Nicolas, Wagnac, Eric et Petit, Yvan. 2025. « Regional mechanical properties of spinal cord gray and white matter in transverse section ». Journal of the Mechanical Behavior of Biomedical Materials, vol. 163.
Compte des citations dans Scopus : 1.

Bouvette, Véronique, Guay, Samuel, De Beaumont, Louis, Petit, Yvan, Vinet, Sophie-Andrée et Wagnac, Eric. 2025. « Role of player-specific white matter parcellation and scaling in impact-induced strain responses ». Biomechanics and Modeling in Mechanobiology, vol. 24, nº 3. pp. 939-961.

Dionne, Antoine, Magnuson, David, Richard-Denis, Andréane, Petit, Yvan, Barthélémy, Dorothy, Bernard, Francis et Mac-Thiong, Jean-Marc. 2025. « Early exercise therapy in patients with severe traumatic spinal cord injury: Is it feasible in the ICU? ». Critical Care, vol. 29, nº 1.

Dionne, Antoine, Magnuson, David, Richard-Denis, Andreane, Petit, Yvan, Barthélémy, Dorothy, Bernard, Francis et Mac-Thiong, Jean-Marc. 2025. « Safety and feasibility of early activity-based therapy following severe traumatic spinal cord injury: Results from a single-arm pilot trial ». Journal of Neurotrauma, vol. 42, nº 3-4.

Pham, Tan

SaediArdahaei, Saeid et Pham, Xuan-Tan. 2025. « Multi-response optimization of aluminum laser spot welding with sinusoidal and cosinusoidal power profiles based on Taguchi-Grey relational analysis ». Materials, vol. 18, nº 13.

Rousse, Daniel R.

Memme, Samuele, Fossa, Marco et Rousse, Daniel. 2025. « Best tilt of PV system in Canada: Effect of the sky radiation model and climate conditions ». Renewable Energy, vol. 254.

Motamedi, Sina, Rousse, Daniel R. et Promis, Geoffrey. 2025. « A review of mycelium bio-composites as energy-efficient sustainable building materials ». Energies, vol. 18, nº 16.

Motamedi, Sina, Rousse, Daniel R. et Promis, Geoffrey. 2025. « Microstructure-driven hygrothermal behavior of mycelium-based composites for bio-based insulation ». Energies, vol. 18, nº 11.

Patin, Mathieu et Rousse, Daniel R.. 2025. « Optimizing economic performances of foundation earth-to-air heat exchangers for low-technology residential air-conditioning ». Energy and Buildings, vol. 328.
Compte des citations dans Scopus : 5.

Saad, Maarouf

Salas Gordoniz, Jorge Esteban, Saad, Maarouf et St-Onge, David. 2025. « Simple tuning for an adaptive and model-free control of indoor airships ». Journal of Computational and Nonlinear Dynamics, vol. 20, nº 8.

Sanjosé, Marlène

Santamaria, Jorge, Bierrenbach-Lima, André, Sanjosé, Marlène et Moreau, Stéphane. 2025. « Shape considerations for the design of propellers with trailing edge serrations ». Journal of Sound and Vibration, vol. 595.
Compte des citations dans Scopus : 1.

Zhou, Ziyang, Moreau, Stephane et Sanjose, Marlene. 2025. « Installation effects on airfoil self-noise estimated by direct numerical simulations ». Journal of Sound and Vibration, vol. 604.
Compte des citations dans Scopus : 1.

Seers, Patrice

Niquet, Gabriel, Lemieux, Patrick et Seers, Patrice. 2025. « A novel approach for exhaust gas recirculation stratification in a spark-ignition engine ». Applied Thermal Engineering, vol. 266.

Songmene, Victor

Ammar, H. R., Samuel, E., Samuel, F. H., Elsharkawi, E., Doty, H. W. et Songmene, V.. 2025. « Effect of Be, Sr, Mn, Mg, Cr and Si Addition on neutralization and fragmentation of β-Al5SiFe Phase in Al-(6-10) %Si Alloys ». International Journal of Metalcasting.
Compte des citations dans Scopus : 2. (Sous presse)

Doty, H. W., Ammar, H. R., Samuel, A. M., Samuel, F. H. et Songmene, V.. 2025. « Effect of La and Ce addition on the microstructural characteristics and tensile properties of 220 and 356.1 alloys ». International Journal of Metalcasting.
(Sous presse)

Doty, H. W., Ammar, H. R., Samuel, A. M., Songmene, V. et Samuel, F. H.. 2025. « Effect of alloy composition, solidification rate, porosity level, grain refining and modification on the performance of aluminum-based alloys ». Journal of Materials Engineering and Performance.
(Sous presse)

Doty, H. W., Hernandez-Sandoval, J., Ammar, H. R., Songmene, V. et Samuel, F. H.. 2025. « Determination of Young's modulus in aluminum alloys: Role of precipitates, dispersoids, and intermetallics ». Journal of Materials Research and Technology, vol. 37. pp. 3549-3562.

Doty, H. W., Samuel, E., Samuel, A. M., Elsharkawi, E., Songmene, V. et Samuel, F. H.. 2025. « Effect of mischmetal concentration and superheating on the microstructure and tensile properties A319.1: Role of Fe content ». Journal of Materials Research and Technology, vol. 35. pp. 51-66.
Compte des citations dans Scopus : 1.

Doty, Herbert W., Samuel, Ehab, Samuel, Agnes M., Songmene, Victor et Samuel, Fawzy H.. 2025. « Effect of melt treatment and heat treatment on the performance of aluminum cylinder heads ». Materials, vol. 18, nº 5.

Doty, Herbert, Samuel, Ehab, Samuel, Agnes M., Elsharkawi, Ehab, Songmene, Victor et Samuel, Fawzy H.. 2025. « Effect of Fe concentration and superheating on the microstructure and tensile properties of high Mg 413.0-Type Alloys: Role of Sr, Be, P, and La ». Materials, vol. 18, nº 2.
Compte des citations dans Scopus : 1.

Radan, Lida, Songmene, Victor, Samuel, Agnes M. et Samuel, Fawzy H.. 2025. « Effects of alloy composition, hardness, and milling parameters on the cutting forces of Al-Li-based alloys ». Materials, vol. 18, nº 12.

Ullah, Irfan, Akinlabi, Esther Titilayo, Kouam, Jules et Songmene, Victor. 2025. « A comprehensive experimental investigation on the correlation between chip formation, machined surface integrity, and particle emissions during high-speed milling of TC4 titanium alloy ». International Journal of Advanced Manufacturing Technology, vol. 136, nº 7-8. pp. 3285-3301.
Compte des citations dans Scopus : 2.

Soulaïmani, Azzeddine

Chaudhry, Shubham, Abdedou, Azzedine et Soulaïmani, Azzeddine. 2025. « Data-driven non-intrusive reduced order modelling of selective laser melting additive manufacturing process using proper orthogonal decomposition and convolutional autoencoder ». Advanced Modeling and Simulation in Engineering Sciences, vol. 12, nº 1.

Kamil, Hamza, Soulaïmani, Azzeddine et Beljadid, Abdelaziz. 2025. « A comparative study of physics-informed neural network strategies for modeling water and nitrogen transport in unsaturated soils ». Journal of Hydrology, vol. 661, nº Part B.

Kamil, Hamza, Soulaïmani, Azzeddine et Beljadid, Abdelaziz. 2025. « Physics-informed neural operators for efficient modeling of infiltration in porous media ». Journal of Computational Physics, vol. 538.
Compte des citations dans Scopus : 1.

Toutlini, Nour-Eddine, Beljadid, Abdelaziz et Soulaimani, Azzeddine. 2025. « A semi-implicit second-order temporal scheme for solving the pressure head-based form of Richards' and advection-dispersion equations ». Computers and Mathematics with Applications, vol. 187. pp. 106-131.
Compte des citations dans Scopus : 2.

St-Onge, David

Abdalwhab, Abdalwhab, Beltrame, Giovanni, Kahou, Samira Ebrahimi et St-Onge, David. 2025. « Learning multi-agent multi-machine tending by mobile robots ». In The First MARW: Multi-Agent AI in the Real World Workshop at AAAI 2025 (Philadelphia, PA, USA, Mar. 03, 2025) MARW.

Catar, Louis, Tabiai, Ilyass et St-Onge, David. 2025. « Tensile tests of different families of ultra-lightweight photosensitive polymer microlattices ». Journal of Engineering Materials and Technology, vol. 147, nº 4.

Catar, Louis, Zagal Rojas, Sebastián, Wadoux, Pierre, Tabiai, Ilyass et St-Onge, David. 2025. « A mechanical add-on for multi-resin SLA printing: Design, integration, and testing ». In ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC/CIE (Anaheim, CA, USA, Aug. 17-20, 2025)
(Sous presse)

Duval, Hélène, Rochette, Audrey, Dussault, Geneviève et St-Onge, David. 2025. « Exploring the interplay of swarm robotics and choreography to nourish expressivity and construction of meaning for humans ». In Robot Theater. Routledge.
(Sous presse)

Imran, Ali, Beltrame, Giovanni et St-Onge, David. 2025. « GNN-based decentralized perception in multi-robot systems for predicting worker actions ». IEEE Robotics and Automation Letters, vol. 10, nº 6. pp. 6336-6343.

Tabiai, Ilyass

Tahan, Antoine

Chahdoura, Sabrine, Bahloul, Riadh, Tlija, Mehdi et Tahan, Antoine. 2025. « Multi-objective optimization of PLA-FDM parameters for enhancement of industrial product mechanical performance based on GRA-RSM and BBD ». Progress in Additive Manufacturing, vol. 10, nº 2. pp. 1355-1383.
Compte des citations dans Scopus : 10.

Chrétien, Antoine, Tahan, Antoine et Pelletier, Francis. 2025. « Impact of wind turbine nominal power limitation over wind turbine blade remaining useful life and its economic consequences ». Wind Engineering, vol. 49, nº 2. pp. 426-443.

Haro, Luis Miguel Moreno, Oliveira-Filho, Adaiton, Agard, Bruno et Tahan, Antoine. 2025. « Failure detection in sensors via variational autoencoders and image-based feature representation ». Sensors, vol. 25, nº 7.

Jose, Sagar, Zemouri, Ryad, Nguyen, Khanh T. P., Medjaher, Kamal, Lévesque, Mélanie et Tahan, Antoine. 2025. « Prognostics of complex machinery with sparse multilabel multimodal run-to-failure data: A graph neural network approach ». Advanced Engineering Informatics, vol. 65, nº Part D.

Oliveira-Filho, Adaiton, Comeau, Monelle, Cave, James, Nasr, Charbel, Côté, Pavel et Tahan, Antoine. 2025. « Wind turbine SCADA data imbalance: A review of its impact on health condition analyses and mitigation strategies ». Energies, vol. 18, nº 1.
Compte des citations dans Scopus : 2.

Talhi, Chamseddine

Nourmohammadi, Reza, Zhang, Kaiwen et Talhi, Chamseddine. 2025. « BlockFed: A novel federated learning framework based on hierarchical weighted aggregation ». In DEBS 2025 - Proceedings of the 19th ACM International Conference on Distributed and Event-Based Systems (Gothenburg, Sweden, June 10-13, 2025) pp. 134-145. Association for Computing Machinery, Inc.

Thamsuwan, Ornwipa

Cohic, Antoine, Segers, Thibaut, Montes de Oca, Carlos Silva et Thamsuwan, Ornwipa. 2025. « Impact du port d’un exosquelette passif de support de dos sur les synergies musculaires ». Affiche présentée lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).

Cohic, Antoine, Segers, Thibaut et Thamsuwan, Ornwipa. 2025. « Impact of an occupational back-support exoskeleton on muscle synergies during a pick-up movement ». European Journal of Applied Physiology.
(Sous presse)

Messaoud, Ines Belhaj et Thamsuwan, Ornwipa. 2025. « Heart rate variability-based stress detection and fall risk monitoring during daily activities: A machine learning approach ». Computers, vol. 14, nº 2.
Compte des citations dans Scopus : 2.

Ould-Chikh, Nour et Thamsuwan, Ornwipa. 2025. « Revue systématique sur l’efficacité des orthèses, prothèses et exosquelettes dans la réhabilitation des troubles musculo-squelettiques du dos chez les adultes ». Affiche présentée lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).

Rincón Jaramillo, Ana Maria, Yung, Marcus, Yazdani, Aamin et Thamsuwan, Ornwipa. 2025. « A review of anthropometric databases for an inclusive workforce: Constructing databases ». In Proceedings of the 22nd Congress of the International Ergonomics Association, Volume 1: Better Life Ergonomics for Future Humans (IEA 2024) (Jeju Island, Korea, Aug. 25-29, 2024) Coll. « Springer Series in Design and Innovation », vol. 39. pp. 283-290. Springer Nature.

Segers, Thibaut, Cohic, Antoine, Montes de Oca, Carlos Silva et Thamsuwan, Ornwipa. 2025. « Évaluation de l’efficacité d’un exosquelette de soutien dorsal passif sur l’activité musculaire ». Affiche présentée lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).

Thamsuwan, Ornwipa et Cherik, Katia. 2025. « Assessment of heart rate variability among plant nursery workers ». Journal of Agromedicine.
(Sous presse)

Voix, Jérémie

Bonnet, Fabien, Nélisse, Hugues et Voix, Jérémie. 2025. « Individual calibration of in-ear noise dosimeters: Enhanced dual-microphone method in the unoccluded ear ». Communication lors de la conférence : NOISE-CON 2025 (Stowe, VT, USA, June 09-11, 2025).

Martin, Alexis et Voix, Jérémie (inventeurs) 25 mars 2025. « System and method for determining cardiac rhythm and/or respiratory rate ». École de technologie supérieure (titulaire(s)). Brevet américain US 12,257,101.

Ollivier, Solenn, Nélisse, Hugues et Voix, Jérémie. 2025. « On the potential benefits of wide dynamic range compression for workers in loud environments: A scoping literature review ». International Journal of Occupational Safety and Ergonomics, vol. 31, nº 1. pp. 181-194.

Voix, Jérémie, Bernier, Antoine et Bonnet, Fabien (inventeurs) 9 septembre 2025. « System and method to perform in-ear noise dosimetry and personal attenuation rating under an electro-acoustic earplug while excluding wearer-induced disturbances and separating exposure sources ». École de technologie supérieure (titulaire(s)). Brevet américain US 12,413,920 B2. [Disponible sur US Patent and Trademark Office (USPTO) https://www.uspto.gov/patents/search/patent-public-search].

Wagnac, Éric

Berriot, Audrey, Evin, Morgane, Kerkouche, Karim, Laroche, Elisabeth, Gerard, Eva et Wagnac, Eric. 2025. « Exploring the effect of displacement rate on the mechanical properties of denticulate ligaments through uniaxial tensile testing ». Journal of the Mechanical Behavior of Biomedical Materials, vol. 162.

Zednik, Ricardo

Guettouche, Wala eddine et Zednik, Ricardo J.. 2025. « Anisotropic fracture energy of boron-doped p-type silicon by microindentation: Influence of temperature and crystallographic orientation ». Crystals, vol. 15, nº 6.

Zhang, Gaixia

Chen, Chen, Liu, Tinging, Pu, Zonghua, Chen, Zhangsen, Zhang, Xiaofeng, Huang, Qiufeng, Al-Enizi, Abdullah M., Nafady, Ayman, Zhang, Gaixia et Sun, Shuhui. 2025. « Unveiling the geometric site dependence of Co-based spinel oxides in the halogen evolution reaction ». Advanced Sustainable Systems, vol. 9, nº 1.
Compte des citations dans Scopus : 2.

Zhang, Kaiwen

Romdhane, Sarra Fekih, Zhang, Kaiwen et De Santa-Eulalia, Luis Antonio. 2025. « Towards efficient and fine-grained traceability for a live lobster supply chain using blockchain technology ». In 6th International Conference on Industry 4.0 and Smart Manufacturing (Prague, Czech Republic, Nov. 20-22, 2024) Coll. « Procedia Computer Science », vol. 253. pp. 612-625. Elsevier.
Compte des citations dans Scopus : 2.

Zhang, Kun

Dou, Hongwen et Zhang, Kun. 2025. « Transfer learning for cross-building forecasting of building energy and indoor air temperature in model predictive control applications ». Journal of Building Engineering, vol. 111.

Saloux, Etienne, Candanedo, José A., Vallianos, Charalampos, Morovat, Navid et Zhang, Kun. 2025. « From theory to practice: A critical review of model predictive control field implementations in the built environment ». Applied Energy, vol. 393.
Compte des citations dans Scopus : 2.

Cette liste a été générée le Mon Sep 29 20:14:04 2025 EDT.