L'affiliation est "Génie mécanique"

Abbasi, Mahdi, Lachance, Mathieu et David, Eric. 2025. « TEV sensor-based PD measurements with a focus on PRPD patterns and FFT Analysis ». In IEEE Electrical Insulation Conference (EIC) (South Padre Island, TX, USA, June 08-11, 2025) Institute of Electrical and Electronics Engineers Inc..

Abdalwhab, Abdalwhab Bakheet Mohamed, Beltrame, Giovanni, Ebrahimi Kahou, Samira et St-Onge, David. 2025. « Attention-Based Multi-Agent RL for Multi-Machine Tending Using Mobile Robots ». AI, vol. 6, nº 10.

Abdalwhab, Abdalwhab, Beltrame, Giovanni, Kahou, Samira Ebrahimi et St-Onge, David. 2025. « Learning multi-agent multi-machine tending by mobile robots ». In The First MARW: Multi-Agent AI in the Real World Workshop at AAAI 2025 (Philadelphia, PA, USA, Mar. 03, 2025) MARW.

Abdalwhab, Abdalwhab, Imran, Ali, Heydarian, Sina, Iordanova, Ivanka et St-Onge, David. 2025. « Are open-vocabulary models ready for detection of MEP elements on construction sites ». In Proceedings of the 42nd International Symposium on Automation and Robotics in Construction (Montreal, QC, Canada, July 28-31, 2025) pp. 1421-1424. International Association for Automation and Robotics in Construction.

Abida, Rayene, Hof, Lucas et Kenné, Jean-Pierre. 2025. « Automating lockout/tagout data integration in the pulp and paper industry ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Aboud, Damon G. K., Demarquette, Nicole R., Rodrigue, Denis et Kietzig, Anne-Marie. 2025. « Considering microtexture geometry to improve micro-injection molding fidelity ». Journal of Micromechanics and Microengineering, vol. 35, nº 6.

Aboussafy, Charles, Brunetière, Noël et Guilbault, Raynald. 2025. « Development of a finite element model for solving 2D Navier-Stokes equations in deep surface textures causing cavitation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Afkari, Parisa, Chouak, Mohamed, Cantin, Sébastien et Garnier, François. 2025. « Evaluating bypass effects of advanced turbofan engines on contrail formation using large eddy simulations ». Journal of Aircraft.
(Sous presse)

Alakhdar, M., Hallé, S. et Vinches, L.. 2025. « Wind’s impact on thermal resistance: Challenging existing standards ». Communication lors de la conférence : Institute of Textile Science (Montréal, QC, Canada, Mar. 18-19, 2025).

Alakhdar, Mostafa, Vinches, Ludwig et Hallé, Stéphane. 2025. « Assessing thermal resistance of a nonwoven textile under wind exposure: Challenging ISO 9920 with experimental insights ». Journal of Industrial Textiles, vol. 55.
Compte des citations dans Scopus : 1.

Aliahmadi, Seyed Zeinab, Jabbarzadeh, Armin et Hof, Lucas. 2025. « Leveraging Industry 4.0 technologies in Canadian agri-food supply chains ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Alix, Emma, Nadeau, Sylvie, Kenné, Jean-Pierre et Tahan, Antoine. 2025. « Les défis du désassemblage à l'ère de l'électrique dans l’industrie automobile ». Affiche présentée lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).

Alladini, Nahid, Wuthrich, Rolf et Hof, Lucas. 2025. « Using random forest feature importance to rank environmental factors affecting PV degradation rates ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Ammar, H. R., Samuel, E., Samuel, F. H., Elsharkawi, E., Doty, H. W. et Songmene, V.. 2025. « Effect of Be, Sr, Mn, Mg, Cr and Si Addition on neutralization and fragmentation of β-Al5SiFe Phase in Al-(6-10) %Si Alloys ». International Journal of Metalcasting.
Compte des citations dans Scopus : 3. (Sous presse)

Antoine, C., Pierre, B., Guillaume, P. et Alain, L.. 2025. « Creating schematic representation of corrosion using CGAN and ultrasonic imaging ». In SPIE Smart Structures + Nondestructive Evaluation (Vancouver, BC, Canada, Mar. 17-20, 2025) Coll. « Proceedings of SPIE », vol. 13438. SPIE.

Appia, Christian et Songmene, Victor. 2025. « Reduction of fine and ultrafine particles by water: Application to the machining of dusty materials ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Arasteh, Hossein, Kalivogui, Siba, Merabtine, Abdelatif, Maref, Wahid, Zhang, Kun, Durand, Sullivan, Turcotte, Patrick, Rousse, Daniel, Ilinca, Adrian, Haillot, Didier et Izquierdo, Ricardo. 2025. « Decarbonization strategies for Northern Quebec: Enhancing building efficiency and integrating renewable energy in off-grid indigenous communities ». Energies, vol. 18, nº 16.

Ardisson, Aurélien, Beauséjour, Marie-Hélène, Wagnac, Eric et Bulla, Marian. 2025. « Enhanced Hill-type model for muscle contraction simulation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Arias-Hernandez, Jesus Alejandro, Kwon, Sun Yong et Moosavi-Khoonsari, Elmira. 2025. « Application of polyhedron model to predict heat capacity of mixed oxides ». Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, vol. 89.

Austernaud, Y., Novelli, M., Grosdidier, T. et Bocher, P.. 2025. « Enhancing fatigue performance of austenitic stainless steel via warm surface severe plastic deformation using surface mechanical attrition treatment ». International Journal of Fatigue, vol. 201.

Austernaud, Y., Novelli, M., Kauffmann, T. H., Bocher, P. et Grosdidier, T.. 2025. « Surface contamination induced by warm severe surface peening using 100C6 steel and ZrO2 shots ». Materials Letters: X, vol. 26.

Austernaud, Yann, Novelli, Marc, Bocher, Philippe et Grosdidier, Thierry. 2025. « Effect of shot peening temperature on the microstructure induced by surface severe plastic deformation on an austenitic stainless steel ». Journal of Materials Processing Technology, vol. 339.
Compte des citations dans Scopus : 7.

Azin, Hugo, Mungyeko Bisulandu, Baby-Jean Robert, Ilinca, Adrian et Rousse, Daniel R.. 2025. « Decarbonizing arctic mining operations with wind-hydrogen systems: Case study of Raglan Mine ». Processes, vol. 13, nº 10.

Azzaz, Riadh, Jahazi, Mohammad, Ebrahimi Kahou, Samira et Moosavi-Khoonsari, Elmira. 2025. « Prediction of final phosphorus content of steel in a scrap-based electric arc furnace using artificial neural networks ». Metals, vol. 15, nº 1.
Compte des citations dans Scopus : 3.

Babin, William, Joubair, Ahmed et Tahan, Souheil-Antoine. 2025. « Experimental repeatability assessment of a metrology-assisted robotic assembly system using iGPS tracking ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Bailly, Nicolas, Schäuble, Andreas, Guesneau, Marianne, Wei, Wei et Petit, Yvan. 2025. « Assessing bicycle helmet protection for head and neck in E-scooter falls ». Traffic Injury Prevention.
(Sous presse)

Bailly, Nicolas, Wagnac, Eric et Petit, Yvan. 2025. « Regional mechanical properties of spinal cord gray and white matter in transverse section ». Journal of the Mechanical Behavior of Biomedical Materials, vol. 163.
Compte des citations dans Scopus : 3.

Bakhtiar, Nazanin Karimi, Proulx, Hélène, Wingert, Loïc et Hallé, Stéphane. 2025. « Spatio-temporal analysis of aerosol transport in a human-scale room: An experimental and computational study ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bandeira de Souza, Ziani Santana, Araújo do Nascimento, Pedro Lucas, Samara, Mazen, David, Éric, Macedo Fechine, Guilhermino Jose, Alves da Motta Sobrinho, Mauricio et Demarquette, Nicole Raymonde. 2025. « Influence of graphene functionalization on the curing kinetics, dynamical mechanical properties and morphology of epoxy nanocomposites ». Polymer, vol. 320.
Compte des citations dans Scopus : 8.

Banijamali, Seyed Masoud, Ilinca, Adrian, Afrouzi, Ali Alizadeh et Rousse, Daniel R.. 2025. « Optimizing hydrogen liquefaction efficiency through waste heat recovery: A comparative study of three process configurations ». Processes, vol. 13, nº 5.
Compte des citations dans Scopus : 1.

Beaudoin, Étienne J., Zednik, Ricardo J et Demarquette, Nicole R. 2025. « Impact of polydispersity on polymer solutions and electrospun nanofibers ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bekoute, Luisa Bessom, Brochot, Clothilde, Bahloul, Ali, Halle, Stéphane et Hof, Lucas A.. 2025. « Conception d'un banc de test pour la mesure de l'efficacité d'une visière innovante pour la réduction des aérosols à la source ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bélanger, Pierre et Latete, Thibault (inventeurs) 21 janvier 2025. « Ultrasonic testing for defect detection ». École de technologie supérieure (titulaire(s)). Brevet américain US 12,203,897.

Bellavance, Xavier, Leclercq, Aurore, Mouret, Thibault, Landry-blais, Alexandre, Picard, Mathieu et Brailovski, Vladimir. 2025. « Micro-mixing injector manufacturing in refractory metal using laser powder bed fusion process ». In ASME Turbo Expo: Turbomachinery Technical Conference and Exposition (Memphis, TN, USA, June 16-20, 2025) American Society of Mechanical Engineers (ASME).

Benabdesselam, Abderraouf, Pham, Quang Hung, Gagnon, Martin et Tahan, Antoine. 2025. « A multi-layer perceptron approach for indirect measurement of erosive cavitation in hydraulic turbines ». In IET Conference Proceedings (Bruges, Belgium, June 02-05, 2025) pp. 29-34. Institution of Engineering and Technology.

Benallal, Abdellah, Cheggaga, Nawal, Hebib, Amine et Ilinca, Adrian. 2025. « LSTM-based state-of-charge estimation and user interface development for lithium-ion battery management ». World Electric Vehicle Journal, vol. 16, nº 3.
Compte des citations dans Scopus : 1.

Benazzouz, Lydia, Loucif, Abdelhalim, Brionne, Gary, Zhang, Chunping, Gallego, Paloma Isabel, Levesque, Jean-Benoit, Boutarek-Zaourar, Naima et Jahazi, Mohammad. 2025. « Assessing the influence of DSC parameters on accurate determination of liquidus and solidus temperatures of a medium carbon low-alloy steel ». Journal of Phase Equilibria and Diffusion, vol. 46, nº 1. pp. 119-132.

Benesch, Danielle, Villatte, Bérangère, Vinet, Alain, Hébert, Sylvie, Voix, Jérémie et Bouserhal, Rachel E.. 2025. « Stress classification with in-ear heartbeat sounds ». Computers in Biology and Medicine, vol. 186.
Compte des citations dans Scopus : 2.

Benisi Ghadim, H., Godin, A., Veillere, A., Duquesne, M. et Haillot, D.. 2025. « Review of thermal management of electronics and phase change materials ». Renewable and Sustainable Energy Reviews, vol. 208.
Compte des citations dans Scopus : 28.

Bernier, Simon, Levesque, Mélanie, Provencher, Hélène, Bertrand, Alexandre et David, Eric. 2025. « Polarization and depolarization current analysis on hydrogenerators ». In IEEE Electrical Insulation Conference (EIC) (South Padre Island, TX, USA, June 08-11, 2025) Institute of Electrical and Electronics Engineers Inc..

Berriot, Audrey, Evin, Morgane, Kerkouche, Karim, Laroche, Elisabeth, Gerard, Eva et Wagnac, Eric. 2025. « Exploring the effect of displacement rate on the mechanical properties of denticulate ligaments through uniaxial tensile testing ». Journal of the Mechanical Behavior of Biomedical Materials, vol. 162.
Compte des citations dans Scopus : 2.

Bezançon, Gauthier, Doutres, Olivier, Umnova, Olga, Leclaire, Philippe et Dupont, Thomas. 2025. « Experimental analysis of metamaterial with improved high sound levels absorption using complex frequency plane ». Applied Acoustics, vol. 231.
Compte des citations dans Scopus : 7.

Bezançon, Gauthier, Lopez, Maël, Doutres, Olivier, Panneton, Raymond et Dupont, Thomas. 2025. « Low-frequency absorption band in a thin acoustic metamaterial using acoustic black hole termination ». Applied Acoustics, vol. 233.
Compte des citations dans Scopus : 2.

Bisulandu, Baby-Jean Robert Mungyeko, Mboko, Marcel Tsimba, Rousse, Daniel et Ilinca, Adrian. 2025. « Thermodynamic performances of an absorption diffusion refrigeration system, equipped with an ejector-compressor, using the thermal energy of the exhaust gases of cement kilns ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Boniface Awatcha, Willy, Nadeau, Sylvie et Hof, Lucas. 2025. « Circular economy in automotive disassembly: Challenges and opportunities for end-of-life vehicles ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montréal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Bonnet, Fabien, Nélisse, Hugues et Voix, Jérémie. 2025. « Individual calibration of in-ear noise dosimeters: Enhanced dual-microphone method in the unoccluded ear ». Communication lors de la conférence : NOISE-CON 2025 (Stowe, VT, USA, June 09-11, 2025).

Boucherit, Yacine et Jahazi, Mohammad. 2025. « Evaluation of local mechanical properties and correlation with tensile properties of AA7075-T6 friction stir welds via shear punch testing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Boudjelal, Hillal, Torres, Yaniel et Nadeau, Sylvie. 2025. « Adaptation de la typologie de la méthode HFACS pour l’assemblage numérique ». Communication lors de la conférence : Congrès annuel de l’Association Canadienne d’Ergonomie (Québec, QC, Canada, 06-09 oct. 2025).

Bouterra, Sami, Belamadi, Riyadh, Djemili, Abdelouaheb et Ilinca, Adrian. 2025. « Microcylinder and slot combination for flow separation control over a wind turbine airfoil ». Wind Energy, vol. 28, nº 7.

Bouvette, Véronique, Guay, Samuel, De Beaumont, Louis, Petit, Yvan, Vinet, Sophie-Andrée et Wagnac, Eric. 2025. « Role of player-specific white matter parcellation and scaling in impact-induced strain responses ». Biomechanics and Modeling in Mechanobiology, vol. 24, nº 3. pp. 939-961.

Bouvette, Véronique, Petit, Yvan, Guay, Samuel, Beaumont, Louis De et Wagnac, Eric. 2025. « Investigating time-dependent strain-based cumulative head impact exposure in Canadian varsity football ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bouzid, Abdel-Hakim. 2025. « A study on the thighness parameter used in the evaluation of the PVRC gasket constants ». In ASME 2025 Pressure Vessels & Piping Conference (Montreal, QC, Canada, July 20-25, 2025) American Society of Mechanical Engineers (ASME).

Bouzid, Abdel-Hakim. 2025. « On the analytical modeling of autofrettaged cylinders subjected to bauschinger and softening effects ». Journal of Pressure Vessel Technology, vol. 147, nº 6.

Braga, Rafael Gomes, Tahir, Muhammad Owais, Karimi, Sina, Dah-Achinanon, Ulrich, Iordanova, Ivanka et St-Onge, David. 2025. « Intuitive BIM-aided robotic navigation and assets localization with semantic user interfaces ». Frontiers in Robotics and AI, vol. 12.
Compte des citations dans Scopus : 1.

Braun, Léo, Lalonde, Sébastien et Guilbault, Raynald. 2025. « Efficient semi-analytical method to assess contact conditions in multi-layered helical strand cables ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Bretin, R. et Bocher, P.. 2025. « Neighborhood and surface effects on polycrystal stress field extreme values: An analysis in linear elastic range by means of cellular automaton ». International Journal of Fatigue, vol. 192.

Campion, Donatien, Kreitcberg, Alena et Brailovski, Vladimir. 2025. « Analytical pretraining of artificial neural network models to mitigate limited experiment data availability in the L-PBF melt pool dimensions and densities predictions ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Cantin, S., Chouak, M. et Garnier, F.. 2025. « Effects of fuel sulfur content and nvPM emissions on contrail formation: A CFD-microphysics study including the role of organic compounds ». Journal of Aerosol Science, vol. 188.
Compte des citations dans Scopus : 1.

Carillo, K., Pires, L., Padois, T., Brailovski, V. et Doutres, O.. 2025. « Enhancing low-frequency transmission loss in aircraft fuselage sidewalls with a flat array of covered Helmholtz resonators metamaterial ». Aerospace Science and Technology, vol. 166.

Carillo, Kévin, Sgard, Franck, Dazel, Olivier et Doutres, Olivier. 2025. « Enhancing acoustic comfort for earplug users: Objective and subjective evaluation of bone-conducted sound with meta-earplugs incorporating Helmholtz resonators ». Applied Acoustics, vol. 240.

Carlier, Florian, Kenné, Jean-Pierre et Hof, Lucas. 2025. « Performance analysis of UWB localization in multi-floor industrial scenarios ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Catar, Louis, Rojas, Sebastian Zagal, Wadoux, Pierre, Tabiai, Ilyass et St-Onge, David. 2025. « A mechanical add-on for multi-resin SLA printing: Design, integration, and testing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Catar, Louis, Tabiai, Ilyass et St-Onge, David. 2025. « Tensile tests of different families of ultra-lightweight photosensitive polymer microlattices ». Journal of Engineering Materials and Technology, vol. 147, nº 4.

Catar, Louis, Zagal Rojas, Sebastián, Wadoux, Pierre, Tabiai, Ilyass et St-Onge, David. 2025. « A mechanical add-on for multi-resin SLA printing: Design, integration, and testing ». In Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference IDETC/CIE (Anaheim, CA, USA, Aug. 17-20, 2025) American Society of Mechanical Engineers.

Chaboty, Aubin, Nguyen, Vu-Hieu, Haiat, Guillame et Bélanger, Pierre. 2025. « Estimating the properties of bone phantom cylinders through the inversion of axially transmitted low-frequency ultrasonic guided waves ». Ultrasonics, vol. 155.

Chahdoura, Sabrine, Bahloul, Riadh, Tlija, Mehdi et Tahan, Antoine. 2025. « Multi-objective optimization of PLA-FDM parameters for enhancement of industrial product mechanical performance based on GRA-RSM and BBD ». Progress in Additive Manufacturing, vol. 10, nº 2. pp. 1355-1383.
Compte des citations dans Scopus : 12.

Chandra Shekar, Arjun, Leclair, Jean-Philippe, Zitoune, Redouane et Hof, Lucas A.. 2025. « Surface engineering strategies for aerospace composite repairs: Machining and texturation of additive manufacturing parts by abrasive waterjet ». Wear, vol. 570.
Compte des citations dans Scopus : 2.

Chaudhry, Shubham, Abdedou, Azzedine et Soulaïmani, Azzeddine. 2025. « Data-driven non-intrusive reduced order modelling of selective laser melting additive manufacturing process using proper orthogonal decomposition and convolutional autoencoder ». Advanced Modeling and Simulation in Engineering Sciences, vol. 12, nº 1.

Chavanel-Precloux, Lucas, Maranzana, Roland et Hof, Lucas A.. 2025. « On the modular design application for the gas turbine sector: A performance optimization approach in the context of industry 4.0 ». Fluids, vol. 10, nº 3.
Compte des citations dans Scopus : 1.

Chen, Chen, Liu, Tinging, Pu, Zonghua, Chen, Zhangsen, Zhang, Xiaofeng, Huang, Qiufeng, Al-Enizi, Abdullah M., Nafady, Ayman, Zhang, Gaixia et Sun, Shuhui. 2025. « Unveiling the geometric site dependence of Co-based spinel oxides in the halogen evolution reaction ». Advanced Sustainable Systems, vol. 9, nº 1.
Compte des citations dans Scopus : 2.

Chentouf, Samir Mourad, Grandmont, Philippe, Saadati, Mohammad, Amimer, Nora et Jahazi, Mohammad. 2025. « Influence of friction-stir-processing parameters on the microstructure and local mechanical properties of an aluminium-6% magnesium-H18 alloy ». Metals, vol. 15, nº 7.
Compte des citations dans Scopus : 1.

Chrétien, Antoine, Tahan, Antoine et Pelletier, Francis. 2025. « Impact of wind turbine nominal power limitation over wind turbine blade remaining useful life and its economic consequences ». Wind Engineering, vol. 49, nº 2. pp. 426-443.

Cohic, Antoine, Segers, Thibaut, Montes de Oca, Carlos Silva et Thamsuwan, Ornwipa. 2025. « Impact du port d’un exosquelette passif de support de dos sur les synergies musculaires ». Affiche présentée lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).

Cohic, Antoine, Segers, Thibaut et Thamsuwan, Ornwipa. 2025. « Impact of an occupational back-support exoskeleton on muscle synergies during a pick-up movement ». European Journal of Applied Physiology.
(Sous presse)

Cole, Douglas F., Zednik, Ricardo J. et Hof, Lucas A.. 2025. « Diffusion, viscosity, and cycle times for high aspect ratio glass nanoimprinting ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Cossin, Marion, Schmidt, Pierre, Gilet, Flavie, Parent, Gerald, Menard, Anne-Laure, Mathieu, Yves et Wagnac, Eric. 2025. « Reducing lumbar spine loading in Russian bar porters: A case study ». Sports Biomechanics.
(Sous presse)

Côté, Raphaël, Delbergue, Dorian, Demers, Vincent, Demarquette, Nicole R., Charlon, Sébastien et Soulestin, Jérémie. 2025. « Influence of process parameters on the occurrence of defects and dimensional properties of green part produced by material extrusion of highly filled polymer ». Progress in Additive Manufacturing, vol. 10, nº 1. pp. 409-425.
Compte des citations dans Scopus : 1.

Côte, Raphaël, Demers, Vincent, Demarquette, Nicole R., Charlon, Sébastien et Soulestin, Jérémie. 2025. « Performance of different material extrusion 3D printing strategies in improving density and dimensional properties ». International Journal of Advanced Manufacturing Technology, vol. 140, nº 7-8. pp. 4045-4061.

Cunha, Baptiste et Seers, Patrice. 2025. « Effect of EGR direct-injection on the resulting flow and stratification in a spark-ignition engine using CFD ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Dahli, Khadidja, Ilinca, Adrian, Benallal, Abdellah, Cheggaga, Nawal et Allaoui, Tayeb. 2025. « Flocking-inspired solar tracking system with adaptive performance in varied environmental conditions ». Energies, vol. 18, nº 8.

Dahmani, Jawad, Petit, Yvan et Laporte, Catherine. 2025. « Ultrasound imaging dataset for elastography, deformation correction, and algorithm evaluation ». In SPIE Medical Imaging 2025: Ultrasonic Imaging and Tomography (San Diego, CA, USA, Feb. 16-21, 2025) Coll. « Proceedings of SPIE », vol. 13412. SPIE.

Daoust, Élie, Ahmadi, Ali, Soulez, Gilles et Lerouge, Sophie. 2025. « Optimisation des propriétés mécaniques des fantômes vasculaires pour des tests in vitro réalistes ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Darvishmotevally, Parisa, Saadati, Mohammad, Cormier, Jonathan et Jahazi, Mohammad. 2025. « Morphology evolution of plate-like precipitates in a polycrystalline Ni-based superalloy ». Journal of Alloys and Compounds, vol. 1040.

de Carvalho Arjona, Jéssica, Samara, Mazen, Ulsen, Carina, Valenzuela Diaz, Francisco Rolando et Demarquette, Nicole Raymonde. 2025. « Isoniazid adsorption and release by Cloisite and Laponite: An effect of surface charge ». Materials Chemistry and Physics, vol. 344.
Compte des citations dans Scopus : 1.

de Carvalho Arjona, Jessica, Ulsen, Carina, Tada, Dayane, Valenzuela Diaz, Francisco Rolando et Demarquette, Nicole Raymonde. 2025. « The influence of adsorption incorporation mechanism on the release of isoniazid by montmorillonite ». Journal of Drug Delivery Science and Technology, vol. 108.
Compte des citations dans Scopus : 1.

Delbari, Seyed Ali et Hof, Lucas A.. 2025. « The impact of ion-exchange treatment on the degradation behavior of aluminosilicate glass ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Desrosiers, Catherine, Brika, Salah Eddine, Masson, Jean-René Poulin, Provencher, Benjamin, Cheriet, Farida, Piché, Nicolas, Brailovski, Vladimir et Guibaut, François. 2025. « Digital twin modeling for defect detection in LPBF parts: A case study ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Desrosiers, Catherine, Letenneur, Morgan, Bernier, Fabrice, Piche, Nicolas, Provencher, Benjamin, Cheriet, Farida, Guibault, François et Brailovski, Vladimir. 2025. « Automated porosity segmentation in laser powder bed fusion part using computed tomography: A validity study ». Journal of Intelligent Manufacturing, vol. 36, nº 2. pp. 1341-1361.
Compte des citations dans Scopus : 8.

Di Labbio, Giuseppe, Hof, Lucas, Chaouki, Haitam et Lessard, Michel. 2025. « AI-driven modelling of electrostatic powder coating: Data collection ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Dionne, Antoine, Magnuson, David, Richard-Denis, Andréane, Petit, Yvan, Barthélémy, Dorothy, Bernard, Francis et Mac-Thiong, Jean-Marc. 2025. « Early exercise therapy in patients with severe traumatic spinal cord injury: Is it feasible in the ICU? ». Critical Care, vol. 29, nº 1.

Dionne, Antoine, Magnuson, David, Richard-Denis, Andreane, Petit, Yvan, Barthélémy, Dorothy, Bernard, Francis et Mac-Thiong, Jean-Marc. 2025. « Safety and feasibility of early activity-based therapy following severe traumatic spinal cord injury: Results from a single-arm pilot trial ». Journal of Neurotrauma, vol. 42, nº 3-4.

Diotalevi, Lucien, Léger, Pauline, Beauséjour, Marie-Hélène, Mac-Thiong, Jean-Marc et Petit, Yvan. 2025. « Trained nnU-Net model for semantic segmentation of human adult cervical vertebrae from CT-Scans ». Affiche présentée lors de la conférence : 47th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (Copenhagen, Denmark, July 14-18, 2025).

Diotalevi, Lucien, Léger, Pauline, Beauséjour, Marie-Hélène, Mac-Thiong, Jean-Marc et Petit, Yvan. 2025. « Trained nnU-Net model for semantic segmentation of human adult cervical vertebrae from CT-Scans ». In 47th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (Copenhagen, Denmark, July 14-18, 2025) Institute of electrical and Electonics Engineers Inc..

Djefour, Djoher, Nadeau, S. et Landau, K.. 2025. « Analyse des interfaces homme-outil : comprendre les paramètres clés de ces interfaces - étude exploratoire avec un gant de données (VMG30) ». Communication lors de la conférence : Congrès annuel AQHSST (Drummondville, QC, Canada, 21-22 mai 2025).

Djefour, Djoher, Nadeau, Sylvie et Landau, Kurt. 2025. « Digital Human Modeling for long, and low-volume assembly processes: Gas turbine assembly case study ». Open Journal of Safety Science and Technology, vol. 15, nº 3.

Dos Santos, Marcela Gonçalves, Hallé, Stéphane et Petrillo, Fabio. 2025. « Mutation testing for industrial robotic systems ». In Proceedings of the seventh International Workshop on Formal Methods for Autonomous Systems (FMAS 2025) (Paris, France, Nov. 17-19, 2025) Coll. « Electronic Proceedings in Theoretical Computer Science (EPTCS) », vol. 436. pp. 31-47. Open Publishing Association.

Doty, H. W., Ammar, H. R., Samuel, A. M., Samuel, F. H. et Songmene, V.. 2025. « Effect of La and Ce addition on the microstructural characteristics and tensile properties of 220 and 356.1 alloys ». International Journal of Metalcasting.
Compte des citations dans Scopus : 1. (Sous presse)

Doty, H. W., Ammar, H. R., Samuel, A. M., Songmene, V. et Samuel, F. H.. 2025. « Effect of alloy composition, solidification rate, porosity level, grain refining and modification on the performance of aluminum-based alloys ». Journal of Materials Engineering and Performance.
(Sous presse)

Doty, H. W., Hernandez-Sandoval, J., Ammar, H. R., Songmene, V. et Samuel, F. H.. 2025. « Determination of Young's modulus in aluminum alloys: Role of precipitates, dispersoids, and intermetallics ». Journal of Materials Research and Technology, vol. 37. pp. 3549-3562.

Doty, H. W., Samuel, E., Samuel, A. M., Elsharkawi, E., Songmene, V. et Samuel, F. H.. 2025. « Effect of mischmetal concentration and superheating on the microstructure and tensile properties A319.1: Role of Fe content ». Journal of Materials Research and Technology, vol. 35. pp. 51-66.
Compte des citations dans Scopus : 1.

Doty, Herbert W., Samuel, Ehab, Samuel, Agnes M., Songmene, Victor et Samuel, Fawzy H.. 2025. « Effect of melt treatment and heat treatment on the performance of aluminum cylinder heads ». Materials, vol. 18, nº 5.

Doty, Herbert, Samuel, Ehab, Samuel, Agnes M., Elsharkawi, Ehab, Songmene, Victor et Samuel, Fawzy H.. 2025. « Effect of Fe concentration and superheating on the microstructure and tensile properties of high Mg 413.0-Type Alloys: Role of Sr, Be, P, and La ». Materials, vol. 18, nº 2.
Compte des citations dans Scopus : 2.

Dou, Hongwen et Zhang, Kun. 2025. « An integrated physical and data-driven model for a chiller evaporator ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Dou, Hongwen et Zhang, Kun. 2025. « Transfer learning for cross-building forecasting of building energy and indoor air temperature in model predictive control applications ». Journal of Building Engineering, vol. 111.
Compte des citations dans Scopus : 1.

Dou, Hongwen, Zhang, Kun et Zmeureanu, Radu. 2025. « Grey-box models of chiller evaporator for practical integration in building automation systems ». Science and Technology for the Built Environment.
(Sous presse)

Douik, Helmi, Chaabane, Amin et Hof, Lucas. 2025. « Development of a method for comparing the similarity of CAO 3D models ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Doutres, Olivier, Luan, Yu, Cyr-Desroches, Marc-Olivier, Carillo, Kévin, Richert, Robin et Sgard, Franck. 2025. « On the design of an acoustical test fixture for assessing the objective occlusion effect ». Applied Acoustics, vol. 228.
Compte des citations dans Scopus : 2.

Dumitru, Dorian Stefan, Tabiai, Ilyass et Melancon, David. 2025. « Deployable composite panel for the electromagnetic deorbitation of satellites ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Dupeyroux, Lisa, Wheatley, Sydney, Rodger, Melanie, Lerouge, Sophie, Maurice, Corinne et Ahmadi, Ali. 2025. « Microencapsulation of intestinal bacteria: Impact of RGD on cell activity ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Durand, Sullivan, Haillot, Didier et Rousse, Daniel. 2025. « Stockage d’énergie par pompage thermique multi-énergétique dans un contexte minier nordique ». Communication lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).

Durand, Sullivan, Neveu, Pierre, Rousse, Daniel R. et Haillot, Didier. 2025. « Comparative study of the discharge architecture for a multi-energy pumped thermal energy storage system using finite dimension thermodynamics ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Durand, Sullivan, Turcotte, Patrick, Haillot, Didier, Rousse, Daniel, Arasteh, Hossein, Kalivogui, Siba, Zhang, Kun, Izquierdo, Ricardo, Merabtine, Abdelatif, Maref, Wahid et Ilinca, Adrian. 2025. « Decarbonization strategies for northern Canada: A review of renewable energy and energy storage in off-grid communities ». Energy Conversion and Management: X, vol. 27.
Compte des citations dans Scopus : 4.

Duval, Hélène, Rochette, Audrey, Dussault, Geneviève et St-Onge, David. 2025. « Exploring the interplay of swarm robotics and choreography to nourish expressivity and construction of meaning for humans ». In Robot Theater. Routledge.
(Sous presse)

El Hamrani, Mouna, Benjelloun, Khalid, Kenne, Jean-Pierre, Maarouf, Saad et Elkhouakhi, Mohamed. 2025. « Advanced predictive process control for industrial thickeners ». In Proceedings of the International Conference on Simulation and Modeling Methodologies, Technologies and Applications (Bilbao, Spain, June 11-13, 2025) pp. 262-269. SciTePress.

El Mestari, Wahiba, Cheggaga, Nawal, Adli, Feriel, Benallal, Abdellah et Ilinca, Adrian. 2025. « Tuning parameters of genetic algorithms for wind farm optimization using the design of experiments method ». Sustainability, vol. 17, nº 7.
Compte des citations dans Scopus : 4.

Enama, Laurent Davy Ndzie, Kenne, Jean-Pierre et Gharbi, Ali. 2025. « AI applications in stochastic optimal control for production activity planning in manufacturing systems ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Farazmandnia, Navid et Ilinca, Adrian. 2025. « Recyclable wind turbine blades: A life cycle analysis ». Materials, vol. 18, nº 16.

Fattah, Rachid, Kenne, Jean-Pierre, Benjelloun, Khalid et Chebak, Ahmed. 2025. « Optimization of sliding mode control parameters to improve passenger comfort, road handling and reduce chattering in active electrohydraulic suspension systems ». In International Conference on Control, Automation and Diagnosis (ICCAD) (Barcelona, Spain, July 01-03, 2025) Institute of Electrical and Electronics Engineers Inc..

Fattah, Rachid, Kenne, Jean-Pierre, Benjelloun, Khalid et Chebak, Ahmed. 2025. « Optimization of the backstepping control parameters of an active electrohydraulic suspension to improve passenger comfort and road handling ». IEEE Access, vol. 13. pp. 35985-36005.

Ferreira Junior, José Carlos, Triki, Ennouri, Doutres, Olivier, Demarquette, Nicole R. et Hof, Lucas A.. 2025. « Recyclable polyester textile waste-based composites for building applications in a circular economy framework ». Journal of Cleaner Production, vol. 515.
Compte des citations dans Scopus : 1.

Fischer, O., Lemaire, R., Carré, V., Hertzog, J., Mila-Saavedra, L. D., Brassard, P., Godbout, S., Palacios, J. et Bensakhria, A.. 2025. « Thermogravimetric analysis and kinetic modeling of the pyrolysis of different biomass types by thermochemical valorization of tomato plant residues: Characterization of the pyrolysis process through the coupling of TGA-based kinetic analyses and pilot-scale auger reactor tests ». In 4th Journal of Thermal Analysis and Calorimetry Conference & 10th V4 (Joint Czech-Hungarian-Polish-Slovakian) Thermoanalytical Conference (Budapest , Hungary, June 24-27, 2025) pp. 118-119.

Fischer, Olivier, Lemaire, Romain et Bensakhria, Ammar. 2025. « Pyrolysis of spruce wood, wheat straw, switchgrass, miscanthus and swine manure using catalysts containing alkali and alkaline earth metals: Thermogravimetric analysis and kinetic modeling ». Journal of Thermal Analysis and Calorimetry.
(Sous presse)

Gabriel, Julie, Wagnac, Éric, Petit, Yvan, Haïat, Guillaume, Rosi, Giuseppe et Flouzat-Lachaniette, Charles-Henri. 2025. « Evaluation of pedicle screw primary stability using an instrumented hammer ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Gallerand, Lucie, Legrand, Mathias, Panneton, Raymond, Leclaire, Philippe et Dupont, Thomas. 2025. « Added nonlinear damping of homogenized fluid-saturated microperforated plates in Forchheimer flow regime ». Journal of Sound and Vibration, vol. 606.
Compte des citations dans Scopus : 1.

Gherbi, Yasmine et Thamsuwan, Ornwipa. 2025. « Berg balance test for predicting a fall risk in older adults living at home: A preliminary study on the effect of pre-existing health conditions on postural balance ». In Proceedings of the 22nd Congress of the International Ergonomics Association, Volume 3: Better Life Ergonomics for Future Humans (IEA 2024) (Jeju Island, Korea, Aug. 25-29, 2024) Coll. « Springer Series in Design and Innovation », vol. 41. pp. 455-462. Springer Nature.

Ghodsian, Nooshin, Benfriha, Khaled, Olabi, Adel, Gopinath, Varun, Talhi, Esma, Hof, Lucas et Arnou, Aurélien. 2025. « MSOA: A modular service-oriented architecture to integrate mobile manipulators as cyber-physical systems ». Journal of Intelligent Manufacturing, vol. 36, nº 5. pp. 3207-3226.
Compte des citations dans Scopus : 2.

Gimenez, Jessica C. Ferreira, Paiva, Robert, Bonatti, Sophia H. F., Staffa, Lucas H., Pereira, Edenir Rodrigues, Helal, Emna, Demarquette, Nicole R., Homem, Manoel G. P. et Cruz, Sandra A.. 2025. « Mitigating UV-C degradation in polypropylene using hybrid TiO2/few-layer graphene/photostabilizer systems ». ACS Omega, vol. 10, nº 44. pp. 53467-53478.

Gimenez, Jessica Caroline Ferreira, Bonatti, Sophia Helena Felisbino, Basaglia, Marcos Vinicius, Garcia, Rodrigue Henrique dos Santos, dos Santos, Alef, Staffa, Lucas Henrique, Samara, Mazen, Bettini, Silvia Helena Prado, de Azevedo, Eduardo Ribeiro, Helal, Emna, Demarquette, Nicole Raymonde, Homem, Manoel Gustavo Petrucelli et Cruz, Sandra Andrea. 2025. « 1H time domain nuclear magnetic resonance and oscillatory rheology as a tool for uncovering the impact of UV-C radiation on polypropylene ». Polymers, vol. 17, nº 20.

Gnonhoue, George, David, Éric, Voix, Jérémie et Tabiai, Ilyass. 2025. « Hybrid flexible dry electrodes for electroencephalography: Electrical and thermo-mechanical properties ». Journal of Applied Polymer Science.
(Sous presse)

Gnonhoue, George, Tabiai, Ilyass, Voix, Jérémie et David, Éric. 2025. « Flexible dry electrodes based on styrene-ethylene-butylene-styrene/carbon black and ethylene-vinyl acetate/carbon black for electroencephalography: Electrical, thermal and mechanical properties ». Journal of Applied Polymer Science.
(Sous presse)

Gomez Aguilar, A. J., Kenné, J.-P. et Hof, L. A.. 2025. « Quality inspection and condition-based preventive maintenance in a closed-loop multi-stage manufacturing system ». [Article de conférence]. IFAC-PapersOnLine, vol. 59, nº 10. pp. 100-105.

Gonzalez-Lopez, Aldo, Leclair, Jean-Philippe, Villeneuve, Guillaume, Hof, Lucas A. et Escobedo, Carlos. 2025. « In-situ microplastic pre-treatment and sorting using an inertial microfluidic device ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Goodarzi, Fahimeh et Di Labbio, Giuseppe. 2025. « Vortex dynamics and trajectories of two pulsed jets: A DNS study ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Goodarzi, Fahimeh, Di Labbio, Giuseppe et Mani, Mahmoud. 2025. « Unsteady wake characteristics of a plunging airfoil at post-stall conditions ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Gouin, Charles, St-Onge, David et Reeves, Nicolas. 2025. « Ohno: Slow-motion precision engineering for the visualization of Earth’s tectonic drift ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Guesneau, Marianne, Cherta-Ballester, Oscar, Honoré, Valentin, Petit, Yvan, Arnoux, Pierre-Jean et Bailly, Nicolas. 2025. « Evaluating the reliability of multibody models of micromobility users: Comparison with ATD reconstructions and real-world accident footage ». In Conference proceedings International Research Council on the Biomechanics of Injury (IRCOBI) (Vilnius, Lithuania, Sept. 10-12, 2025) International Research Council on the Biomechanics of Injury.

Guettouche, Wala eddine et Zednik, Ricardo J.. 2025. « Anisotropic fracture energy of boron-doped p-type silicon by microindentation: Influence of temperature and crystallographic orientation ». Crystals, vol. 15, nº 6.

Guilbault, Raynald. 2025. « S-EPSO: A socio-emotional particle swarm optimization algorithm for multimodal search in low-dimensional engineering applications ». Algorithms, vol. 18, nº 6.

Guner, Bugrahan, Safikhani-Mahmoudi, Mohammad et Dagdeviren, Omur E.. 2025. « Time-resolved mapping of charge carrier dynamics and defect-mediated migration barriers in TiO2 ». Journal of Physical Chemistry C, vol. 129, nº 37. pp. 16879-16886.

Guner, Bugrahan, Safikhani-Mahmoudi, Mohammad, Li, Fengmiao, Zou, Ke et Dagdeviren, Omur E.. 2025. « Ultraviolet irradiation penetration depth on TiO2 ». Communications Chemistry, vol. 8, nº 1.
Compte des citations dans Scopus : 5.

Gunther, Jason, Girard, Mélanie, Dubé, Martine et Tabiai, Ilyass. 2025. « A study on the influence of polypropylene melt flow index on nonwoven fibers produced through hot melt centrifugal spinning ». Journal of Manufacturing Science and Engineering, vol. 147, nº 4.

Haddouche, Mohamed, Ilinca, Adrian et Chaouch, Mounir. 2025. « Enhancing energy efficiency in the wood furniture sector through industry 4.0: Real-time implementation and case study ». Energy Technology.

Hafied, Mohamed Islem, Mateur, Wael, Songmene, Victor, Kouam, Jules et Bahloul, Ali. 2025. « Usinage et finition saine des pierres naturelles et des pierres artificielles: Revue des meilleures pratiques ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Haillot, Didier, Chauvette, Sam, Menguy, Emile, Arrabie, Cédric, Roy, Audrey, Chevassus, Guilhem et Gibout, Stéphane. 2025. « Agriculture nordique : Du cas d’étude de la serre de Kuujjuaq à la création d’un laboratoire de bonne pratique ». Communication lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).

Hakimian, Soorosh, Bouzid, Abdel-Hakim et Hof, Lucas A.. 2025. « Effect of gap size on flange face corrosion ». Materials and Corrosion-Werkstoffe Und Korrosion, vol. 76, nº 6. pp. 833-850.
Compte des citations dans Scopus : 4.

Hakimian, Soroosh, Bouzid, Abdel-Hakim et Hof, Lucas A.. 2025. « Corrosion type identification in flanged joints using recurrent neural networks on electrochemical noise measurements ». npj Materials Degradation, vol. 9, nº 1.
Compte des citations dans Scopus : 1.

Hameury, Celia, Ferrari, Giovanni et Amabili, Marco. 2025. « Experimental testing of four different active vibration controllers on a clamped sandwich beam with nonlinear vibrations ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Hamoud-Michel, Hanna, Wheatley, Sydney, King, Irah, Maurice, Corinne et Ahmadi, Ali. 2025. « Smart capsules for the targeted sampling of microbiota within the gastrointestinal tract ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Haro, Luis Miguel Moreno, Oliveira-Filho, Adaiton, Agard, Bruno et Tahan, Antoine. 2025. « Failure detection in sensors via variational autoencoders and image-based feature representation ». Sensors, vol. 25, nº 7.
Compte des citations dans Scopus : 1.

Hatzikiriakos, Savvas G. et Demarquette, Nicole R.. 2025. « Tribute to Dr. John Michael Dealy and special collection in Physics of Fluids ». Physics of Fluids, vol. 37, nº 9.

Hernandez, Jesus A. Arias et Moosavi-Khoonsari, Elmira. 2025. « Modified polyhedron model for predicting standard enthalpy of formation and entropy of mixed oxides ». Calphad: Computer Coupling of Phase Diagrams and Thermochemistry, vol. 90.

Hosseini, Seyed Hamed Seyed, Hajzargarbashi, Seyedhossein et Liu, Zhaoheng. 2025. « Vibration analysis of robot manipulators and Gaussian process regression for estimating posture-dependent FRF ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Houria, Manel, Kaveh, Kianoosh, Morin, Jean-Benoit, Jahazi, Mohammad et Moosavi, Elmira. 2025. « Computational thermodynamics approach to overcoming challenges in high-nitrogen low-manganese stainless steel production ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Ibrahim, Rony, Zemouri, Ryad, Tahan, Antoine, Kedjar, Bachir, Merkhouf, Arezki et Al-Haddad, Kamal. 2025. « Early detection of rotor faults in large hydrogenerators using vibration measurements, variational autoencoder, and euclidean distance ». IEEE Transactions on Industry Applications, vol. 61, nº 6. pp. 9023-9032.

Imran, Ali, Beltrame, Giovanni et St-Onge, David. 2025. « GNN-based decentralized perception in multi-robot systems for predicting worker actions ». IEEE Robotics and Automation Letters, vol. 10, nº 6. pp. 6336-6343.

Irandoostshahrestani, Misagh et Rousse, Daniel R.. 2025. « Optimizing off-grid PV/wind systems with battery and water storage for rural energy and water access ». Journal of Energy Storage, vol. 140, nº Part B.

Issa, Mohamad, Rizk, Patrick, Boulon, Loïc, Rezkallah, Miloud, Rizk, Rodrigue et Ilinca, Adrian. 2025. « Smart, connected, and sustainable: The transformation of maritime ports through electrification, IoT, 5G, and green energy ». Sustainability, vol. 17, nº 17.
Compte des citations dans Scopus : 2.

Jafari, Moloud, Karganroudi, Sasan Sattarpanah, Rivest, Louis et Tahan, Souheil Antoine. 2025. « Empirical quantification of uncertainty in iGPS measurements for assembly operations ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Jaulin, Tom, Bocher, Philippe, Amar, Luc et Guilbault, Raynald. 2025. « Modeling of steel components hardened by induction and subjected to rolling contact fatigue ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Jean-Fulcrand, Annelise, Léger, Ewen, Dau, Frederic, Dube, Martine et Tabiai, Ilyass. 2025. « Degradation mechanisms of CF/PPS, CF/PEI, and CF/PEEK under combined UV radiation and condensation ». Composites Part A: Applied Science and Manufacturing, vol. 198.

Jeong, Wonjong, Yang, Jeongho, Choi, Joon Phil, Hwang, Ji Yong, Kim, Young Won, Park, Seong Je, Choi, Jae Won, Heogh, Woongbeom, Lee, Hoyoung, Park, Jinsoo, Jung, Min-Kyo, Lee, Ji Eun, Ryu, Ho Jin, Jang, Tae-Sik, Jung, Hyun-Do, Jahazi, Mohammad, Pasco, Jubert, Lee, Myoung-Gyu, Park, Hyejin, Moon, Seung Ki, Advincula, Rigoberto C., Kim, Sang Hoon et Aranas, Clodualdo. 2025. « Al-based functionally graded super-intermetallic compounds for the turbine blade of a high-performance jet engine ». Advanced Composites and Hybrid Materials, vol. 8, nº 6.

Jomaa, Walid, Daoud, Monzer, Javadi, Hamid et Bocher, Philippe. 2025. « Cutting fluid effectiveness in the high-speed finish machining of Inconel 718 using a whisker-reinforced ceramic tool ». Journal of Manufacturing and Materials Processing, vol. 9, nº 4.

Jose, Sagar, Zemouri, Ryad, Nguyen, Khanh T. P., Medjaher, Kamal, Lévesque, Mélanie et Tahan, Antoine. 2025. « Prognostics of complex machinery with sparse multilabel multimodal run-to-failure data: A graph neural network approach ». Advanced Engineering Informatics, vol. 65, nº Part D.
Compte des citations dans Scopus : 1.

Kamdem, B. M., Lemaire, R. et Nikiema, J.. 2025. « Characterization of the physicochemical and ignition properties of densified fuels produced from the co-processing of sawdust, miscanthus, and wheat straw ». In Proceedings of Combustion Institute - Canadian Section, Spring Technical Meeting (Calgary, AB, Canada, May 12-15, 2025)

Kamdem, Brice Martial, Lemaire, Romain et Nikiema, Josiane. 2025. « Characterization of the physicochemical properties of densified fuels produced from the co-processing of sawdust, miscanthus, and wheat straw: Analysis of the impact of the compaction force, the particle size and the feedstock mixing ratio ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Kamdem, Brice Martial, Lemaire, Romain et Nikiema, Josiane. 2025. « Fuel briquettes produced via the co-treatment of wood sawdust, miscanthus and wheat straw: Physicochemical properties ». Industrial Crops and Products, vol. 236.

Kamdem, Brice Martial, Lemaire, Romain et Nikiema, Josiane. 2025. « Insight into the production factors influencing the physicochemical properties of densified briquettes comprising wood shavings and rice husk ». Industrial Crops and Products, vol. 223.
Compte des citations dans Scopus : 3.

Kamdoum, Marie-Rosine Djuidje, Provencher, Hélène, David, Eric, Kechaf, Youness et Seol, Yoon Duk. 2025. « Evaluating turn insulation degradation using sweep frequency response analysis ». In IEEE Electrical Insulation Conference (EIC) (South Padre Island, TX, USA, June 08-11, 2025) Institute of Electrical and Electronics Engineers Inc..

Kamil, Hamza, Soulaïmani, Azzeddine et Beljadid, Abdelaziz. 2025. « A comparative study of physics-informed neural network strategies for modeling water and nitrogen transport in unsaturated soils ». Journal of Hydrology, vol. 661, nº Part B.
Compte des citations dans Scopus : 1.

Kamil, Hamza, Soulaïmani, Azzeddine et Beljadid, Abdelaziz. 2025. « Physics-informed neural operators for efficient modeling of infiltration in porous media ». Journal of Computational Physics, vol. 538.
Compte des citations dans Scopus : 3.

Kanali, Mohamed Hosame, Tahan, Souheil-Antoine et Hof, Lucas. 2025. « 3D metrology-assisted assembly and augmented reality ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Karevan, Ali et Nadeau, Sylvie. 2025. « FRAM-PSO: A semi-quantitative framework integrating multi-dimensional sustainability criteria ». Computers & Industrial Engineering, vol. 210.

Karevan, Ali et Nadeau, Sylvie. 2025. « Fostering AI-human collaboration in industry 5.0 manufacturing ». In Proceedings of the 22nd Congress of the International Ergonomics Association, Volume 2: Better Life Ergonomics for Future Humans (IEA 2024) (Jeju Island, Korea, Aug. 25-29, 2024) Coll. « Springer Series in Design and Innovation », vol. 40. pp. 457-463. Springer.

Karevan, Ali et Nadeau, Sylvie. 8 septembre 2025. « Making Manufacturing Smarter, Safer and More Sustainable ». [Article de recherche]. Substance ÉTS.

Karevan, Ali et Nadeau, Sylvie. 8 septembre 2025. « Rendre l’assemblage/désassemblage plus intelligent, plus sûr et plus durable ». [Article de recherche]. Substance ÉTS.

Karimi, Samira, Helal, Emna, Pinto, Gabriel Matheus, Gutierrez, Giovanna, Moghimian, Nima, Vello, Tatiana Parra, Fechine, Guilhermino José Macêdo, David, Eric et Demarquette, Nicole. 2025. « Effect of few-layer graphene (FLG) and relative photodegradation depth on the ductile to fragile transition of high-density polyethylene ». Journal of Applied Polymer Science.
(Sous presse)

Kaveh, Kianoosh, Barati, Mansoor, Jahazi, Mohammad et Moosavi-Khoonsari, Elmira. 2025. « Degradation mechanisms of magnesia-carbon refractories in radiation heat-affected wall of steel electric arc furnace ». Ceramics International, vol. 51, nº 25, Part C..

Kaveh, Kianoosh, Jahazi, Mohammad, Gallego, Paloma Isabel et Moosavi-Khoonsari, Elmira. 2025. « Effect of Cr2O3 in steel refining slag on the corrosion kinetics of MgO-C refractories ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Kerkouche, Karim, Petit, Yvan, Rey, Clément, Rosi, Giuseppe, Combescure, Christelle et Wagnac, Eric. 2025. « Development of a snow sports helmet integrating a 3D-printed triply periodic minimal surface foam ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Khaldi, Abdelhakim et Guilbault, Raynald. 2025. « An optimization strategy applied to identify the optimal powertrain configurations for efficient electric vehicles ». International Journal of Automotive Technology, vol. 26, nº 6. pp. 1391-1409.

Khan, Numan, Nadeau, Sylvie, Pham, Xuan-Tan et Boton, Conrad. 2025. « Toward a decision support system for a toolbox meeting pertaining to roofing activities in construction ». In Proceedings of the Canadian Society for Civil Engineering Annual Conference 2023 : Construction Track (Moncton, NB, Canada, May 24-27, 2023) Coll. « Lecture Notes in Civil Engineering », vol. 498. pp. 275-286. Springer Cham.

Kheirani, Afsaneh, Tabiai, Ilyass et St-Onge, David. 2025. « From strength to leakage: Extensive mechanical testing of a novel ultra-light membrane small indoor airship ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Kreitcberg, Alena, Trigui, Mohamed Khaled, Chandoul, Abdelberi, Pelletier, Roger et Demers, Vincent. 2025. « Effect of temperature, heating rate, and cooling rate on bonding and nitriding of AlSi10Mg powder occurring during supersolidus liquid-phase sintering ». Journal of Manufacturing and Materials Processing, vol. 9, nº 9.

Kubaski, Mauricio, Demarquette, Nicole R. et Zednik, Ricardo J.. 2025. « Fundamental material parameters governing the performance of polymer-based triboelectric touch sensors ». Journal of Applied Polymer Science.

Lachguer, Lamyae, Hof, Lucas A. et Kenné, Jean-Pierre. 2025. « Optimization of lockout/tagout (LOTO) procedures using connected padlocks ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Laflamme, Simon, Guner, Bugrahan et Dagdeviren, Omur E.. 2025. « Standardizing force reconstruction in dynamic atomic force microscopy ». Journal of Physical Chemistry Letters, vol. 16, nº 49. pp. 12661-12667.

Lanteigne, Jacques, Champliaud, Henri, Jahazi, Mohammad, Pham, Xuan-Tan et Nadi, Reza Bab. 2025. « Numerical prediction of fatigue crack propagation in E410NiMo and 13Cr-6Ni using finite element method ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Leclair, Jean-Philippe, Strugova, Daria, Cree, Duncan et Hof, Lucas A.. 2025. « Evaluation and characterization of waste-derived eggshells as filler in polylactic acid filament feedstock for material extrusion additive manufacturing: A step towards circular manufacturing strategies ». Progress in Additive Manufacturing.
(Sous presse)

Leclercq, Aurore, Czech, Anna, Mouret, Thibault, Lis, Marcin, Wrona, Adriana et Brailovski, Vladimir. 2025. « Molybdenum 8wt% rhenium alloy processed by laser powder bed fusion: From powder production to mechanical testing at elevated temperatures ». International Journal of Refractory Metals and Hard Materials, vol. 132.
Compte des citations dans Scopus : 2.

Leclercq, Aurore, Mouret, Thibault et Brailovski, Vladimir. 2025. « Development of refractory metal manufacturing technology by laser powder bed fusion ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Leclercq, Aurore, Mouret, Thibault et Brailovski, Vladimir. 2025. « Laser powder bed fusion of molybdenum: Density, structure and mechanical properties at room and elevated temperatures ». Materials Science and Engineering: A, vol. 929.
Compte des citations dans Scopus : 4.

Leger, Pauline, Marois, Benjamin, Petit, Yvan, Naveaux, Franck Le, Benoit, David et Wagnac, Eric. 2025. « A novel video-based method to estimate helmet pad deformation during impact ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Lemaire, Romain. 2025. « An overview of the soot suppressing ability of oxygenated compounds considered as sustainable alternative transportation fuels ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Liogier, Louis, Henderson, Andrew et Hof, Lucas. 2025. « Life cycle assessment of the spark assisted chemical engraving (SACE) micro-machining method ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Lombard, Eloi et Bélanger, Pierre. 2025. « Characterization and classification of flaws in PAUT using a convolutional neural network ». In SPIE Smart Structures + Nondestructive Evaluation (Vancouver, BC, Canada, Mar. 17-20, 2025) Coll. « Proceedings of SPIE », vol. 13438. SPIE.

Lopez, Maël, Benchikh Le Hocine, Alla Eddine, Kone, Tenon Charly, Dupont, Thomas et Panneton, Raymond. 2025. « Inertial effects on single-perforation plates resistivity at high flow rates: Computational fluid dynamics and experimental studies ». Journal of the Acoustical Society of America, vol. 157, nº 2. pp. 1512-1522.
Compte des citations dans Scopus : 1.

Lopez, Maël, Kone, Tenon Charly, Benchikh Le Hocine, Alla Eddine, Dupont, Thomas et Panneton, Raymond. 2025. « Mass-spring model for a perforated periodic metamaterial in nonlinear regime ». Journal of the Acoustical Society of America, vol. 157, nº 4. pp. 3192-3203.
Compte des citations dans Scopus : 1.

Loucif, Abdelhalim, Shahriari, Davood, Chadha, Kanwal, Zhang, Chunping, Morin, Jean-Benoit et Jahazi, Mohammad. 2025. « Effect of cooling rate on the as-cast microstructure of a high strength steel produced in a large size ingot ». Key Engineering Materials, vol. 1016. pp. 9-14.

Manlius, Thais, Delteil, Clémence, Godio-Raboutet, Yves, Simeone, Pierre, Wagnac, Eric, Bailly, Nicolas et Thollon, Lionel. 2025. « Method to reverse-engineer head impact conditions leading to a traumatic brain injury by combining CT and MRI images and a finite element model of the head and brain ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Marcil-St-Onge, Gabriel, Chandoul, Abdelberi, Thomas, Yannig, Pelletier, Roger, Lefebvre, Louis-Philippe et Demers, Vincent. 2025. « Material extrusion additive manufacturing of aluminum-based feedstocks ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Maroufkhani, Mohammad, Khodabandeh, Alireza, Radu, Iulian et Jahazi, Mohammad. 2025. « Hybrid GTAW–FCAW of 316L stainless steel pipes: Influence of oxygen content in baking gas and surface preparation on oxide characteristics and corrosion behavior ». Journal of Manufacturing and Materials Processing, vol. 9, nº 11.

Maroufkhani, Mohammad, Khodabandeh, Alireza, Radu, Iulian, Moosavi-Khoonsari, Elmira et Jahazi, Mohammad. 2025. « Thermodynamic and kinetic analyses of high temperature oxidation of 316L stainless steel ». Results in Materials, vol. 28.

Martin, Alexis et Voix, Jérémie (inventeurs) 25 mars 2025. « System and method for determining cardiac rhythm and/or respiratory rate ». École de technologie supérieure (titulaire(s)). Brevet américain US 12,257,101.

Martin, R. G., Jonasson, C., Johansson, C., Tavares, J. R. et Dubé, M.. 2025. « 3D-printing magnetic susceptor filament for induction welding of thermoplastic composite sandwich panels ». Composites Communications, vol. 55.
Compte des citations dans Scopus : 1.

Mateur, Wael, Songmene, Victor, Kouam, Jules et Bahloul, Ali. 2025. « Optimization of wet edge finishing of natural stones: Influence of tool geometry, grit size and cutting conditions ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Meddas, Hamza Sofiane, Zorgani, Muftah, Heidari, Majid, Javidani, Mousa, Levasseur, Tom et Jahazi, Mohammad. 2025. « Crystallographic texture and precipitation control via double austenitization in high-performance tool steel ». Materials and Design, vol. 257.

Meddas, Hamza Sofiane, Zorgani, Muftah, Jahazi, Mohammad, Javidani, Mousa et Levasseur, Tom. 2025. « Impact of orientation and stacking on knife distortion during quenching ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mejía-Moncayo, Camilo, Chaabane, Amin, Kenné, Jean-Pierre et Hof, Lucas A.. 2025. « Key performance indicators for sustainable remanufacturing: A literature review and methodological framework ». Cleaner Logistics and Supply Chain, vol. 17.

Mejía-Moncayo, Camilo, Chaabane, Amin, Kenne, Jean-Pierre et Hof, Lucas A.. 2025. « Performance indicators for sustainable remanufacturing closed-loop supply chains ». In Accelerating the Socio-Ecological Transition: Strategies and Innovations for Sustainable Development. pp. 175-197. Cham : Springer Nature Switzerland.
Compte des citations dans Scopus : 2.

Memme, Samuele, Fossa, Marco et Rousse, Daniel. 2025. « Best tilt of PV system in Canada: Effect of the sky radiation model and climate conditions ». Renewable Energy, vol. 254.
Compte des citations dans Scopus : 1.

Messaoud, Ines Belhaj et Thamsuwan, Ornwipa. 2025. « Heart rate variability-based stress detection and fall risk monitoring during daily activities: A machine learning approach ». Computers, vol. 14, nº 2.
Compte des citations dans Scopus : 5.

Messikh, Hadil, Jahazi, Mohammad, Baiteche, Mounir et Morin, Jean-Benoit. 2025. « Numerical investigation of water quenching of large forged steel blocks: Effect of bath design on water agitation ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mirzaei, Sajad, Jahazi, Mohammad et Morin, Jean-Benoit. 2025. « Machine learning-based optimization of tempering parameters in steel manufacturing using industrial electric furnaces ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mirzaei, Sajad, Morin, Jean-Benoit et Jahazi, Mohammad. 2025. « Data-driven decision support for furnace loading in steel tempering: a machine learning approach based on industrial operations ». Journal of Intelligent Manufacturing.
(Sous presse)

Mirzaei, Sajad, Tolouei, Ehsan, Morin, Jean-Benoit et Jahazi, Mohammad. 2025. « Modelling and analysis of oxide growth kinetics and thermal effects during heat treatment of a MCLA steel: Comparing gas-fired and electric furnaces ». Canadian Metallurgical Quarterly.
(Sous presse)

Moazen, S., Gosselin, F. P., Tabiai, I. et Dubé, M.. 2025. « 3D printing LDPE/lunar regolith simulant composite: Manufacturing with in-situ resources on the moon ». Acta Astronautica, vol. 237. pp. 409-420.

Mohamadi, P., Theurot, D., Hallé, S. et Vinches, L.. 2025. « Sex-based variations in body pressure mapping for sleeping bag applications ». Affiche présentée lors de la conférence : Institute of Textile Science (Montréal, QC, Canada, Mar. 18-19, 2025).

Mohamadi, Parian, Theurot, Dimitri, Hallé, Stéphane et Vinches, Ludwig. 2025. « Sex-specific variations in body pressure distribution across different sleep surfaces and positions ». Ergonomics.
(Sous presse)

Mohammadi, Kyarash, Bhojani, Naeem et Di Labbio, Giuseppe. 2025. « Development of a bladder flow simulator for visualizing ureteral jet dynamics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mokué, Pascale Alison Mekazi, Tahan, Antoine et Hof, Lucas. 2025. « A new perspective on measuring manufacturing modularity ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Moncayo, Camilo Mejia, Kenné, Jean-Pierre et Hof, Lucas A.. 2025. « A smart and sustainable closed-loop supply chain scheduling model for remanufacturing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Mongrain, Alexandre, Pelletier, Simon, Guilbault, Raynald et Lalonde, Sébastien. 2025. « Finite element modeling of high-voltage cable conductor structures under alternating bending loads ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Monsarrat-Chanon, Hami, Voix, Jérémie, Bouserhal, Rachel, Cardinal, Patrick et Chabot, Philippe (inventeurs) 29 juillet 2025. « In-ear nonverbal audio events classification system and method ». École de technologie supérieure (titulaire(s)). Brevet canadien CA 3079917. [Titre traduit: Système de classification d'évènements audio non verbaux intra-auriculaires et procédé associé].

Monsarrat-Chanon, Hami, Voix, Jérémie, Nadon, Vincent et Habrant, Thomas (inventeurs) 29 octobre 2025. « System, device and method for assessing a fit quality of an earpiece ». École de technologie supérieure (titulaire(s)). Brevet européen EP 3 646 615.

Monteiro, Amanda, Filho, A. V. M. L., Dantas, N. K. L., Castro, Jose, Arcanjo, Ayrlw Maynyson C., Rosas, Pedro A. C., Rodrigues, Perolla, Venerando, Augusto C., Spader, Newmar, Mohamed, Mohamed A., Ilinca, Adrian et Marinho, Manoel H. N.. 2025. « Integrating battery energy storage systems for sustainable EV charging infrastructure ». World Electric Vehicle Journal, vol. 16, nº 3.
Compte des citations dans Scopus : 7.

Moosavi-Khoonsari, Elmira, Azzaz, Riadh, Hurel, Valentin, Jahazi, Mohammad et Ebrahimi Kahou, Samira. 2025. « Controlling minor element phosphorus in green electric steelmaking using neural networks ». In REWAS 2025 : Circular Economy for the Energy Transition (Las Vegas , NV, USA, Mar. 23-27, 2025) Coll. « Minerals, Metals & Materials Series » pp. 297-305. Springer.

Moosavi-Khoonsari, Elmira, Dogan, Neslihan, Schrama, Frank N. H., Guerra, Fernando B. et Gu, Kezhuan. 2025. « Desulfurization challenges in the transition to green steel production ». In AISTech - Iron and Steel Technology Conference Proceedings (Nashville, TN, USA, May 05-08, 2025) pp. 859-868. Association for Iron and Steel Technology.

Moradi, Mehrdad et Ilinca, Adrian. 2025. « Analyzing wave dragon under different wave heights using flow-3D: A computational fluid dynamics approach ». Water, vol. 17, nº 5.

Morand, Paul, Amar, Luc et Guilbault, Raynald. 2025. « Contact modeling of conformal surfaces subjected to microslips in spline applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Morelli, Laura, Sirtoli, Vinicius, Gagnon, Ghyslain et Zednik, Ricardo J.. 2025. « Analytical modeling and experimental validation of triboelectric behavior in Kirigami flexible capacitive sensors ». IEEE Transactions on Instrumentation and Measurement, vol. 74.

Mortazavinejad, Seyyed Mohsen, Alakhdar, Mostafa, Vinches, Ludwig et Hallé, Stéphane. 2025. « A novel methodology for calculating thermal conductivity of natural hollow fibers with validation in nonwoven fabric structures ». International Communications in Heat and Mass Transfer, vol. 167, nº Part A.

Mortazavinejad, Seyyed Mohsen, Vinches, Ludwig et Hallé, Stéphane. 2025. « Exploring thermal resistance of nonwoven fabric structures in cold-protective clothing using computational fluid dynamics ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Motamedi, Sina, Rousse, Daniel R. et Promis, Geoffrey. 2025. « A review of mycelium bio-composites as energy-efficient sustainable building materials ». Energies, vol. 18, nº 16.

Motamedi, Sina, Rousse, Daniel R. et Promis, Geoffrey. 2025. « Microstructure-driven hygrothermal behavior of mycelium-based composites for bio-based insulation ». Energies, vol. 18, nº 11.
Compte des citations dans Scopus : 1.

Mouret, Thibault, Leclercq, Aurore et Brailovski, Vladimir. 2025. « The LPBF printability and as-printed mechanical properties of a Ti6246 alloy as a function of printing parameters and microstructure ». Materials Science and Engineering: A, vol. 946.

Mtar, Aymen, Tabiai, Ilyass et Boton, Conrad. 2025. « 4D printing of photoreactive shape memory polymer for smart building applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Muhammed, Musa, Javidani, Mousa, Heidari, Majid, Levasseur, Tom et Jahazi, Mohammad. 2025. « Effect of substrate roughness on the tribological performance of AlTiN/AlTiCrN-Coated A8 Tool Steel ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
(Sous presse)

Muhammed, Musa, Javidani, Mousa, Sadrabadi, Tahere Ebrahimi, Heidari, Majid, Levasseur, Tom et Jahazi, Mohammad. 2025. « A comparative wear analysis of tool steels: An evaluation based on ASTM G65 and G195 testing methods ». Journal of Materials Engineering and Performance.
Compte des citations dans Scopus : 1.

Muhammed, Musa, Javidani, Mousa, Sadrabadi, Tahere Ebrahimi, Heidari, Majid, Levasseur, Tom et Jahazi, Mohammad. 2025. « Effect of layered architectural design on the tribological behaviour of AlTiN/AlTiCrN-based cathodic arc evaporated physical vapour deposition coatings ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
Compte des citations dans Scopus : 2. (Sous presse)

Mullins, Mathieu, Kamil, Hamza, Fahsi, Adil et Soulaïmani, Azzeddine. 2025. « Physics-informed neural networks for solving moving interface flow problems using the level set approach ». Physics of Fluids, vol. 37, nº 10.

Nadeau, Sylvie. 2025. « Expérimentations en HF/E pour la réalité augmentée ou mixte : comment définir la complexité d’assemblage/désassemblage ». Communication lors de la conférence : Congrès annuel AQHSST (Drummondville, QC, Canada, 21-22 mai 2025).

Negrini, A., Gauvin, C., Berbiche, D., Terroir, J., Perrin, N., Jolly, C., Martin, L., Sgard, F. et Doutres, O.. 2025. « Development and validation of the North American COmfort of hearing PROtection Device questionnaire (COPROD-NAQ) ». Safety Science, vol. 181.
Compte des citations dans Scopus : 1.

Ngô, Valérie Tuyêt Mai et Nadeau, Sylvie. 2025. « La complexité de tâche en préparation de commandes, état des lieux ». Communication lors de la conférence : Congrès annuel de l’Association Canadienne d’Ergonomie (Québec, QC, Canada, 06-09 oct. 2025).

Nicolle, Léo, Lalonde, Sébastien et Guilbault, Raynald. 2025. « Design of an adjustable-span test bench for studying fatigue of high-voltage clamp-conductor assemblies ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Nikbakht, R., Saadati, M., Kim, H. S., Jahazi, M. et Chromik, R. R.. 2025. « Multi-scale analysis of microstructural evolution and atomic bonding mechanisms in CoCrFeMnNi high-entropy alloys upon cold spray impact ». Journal of Materials Science and Technology, vol. 208. pp. 263-277.
Compte des citations dans Scopus : 7.

Niquet, Gabriel, Lemieux, Patrick et Seers, Patrice. 2025. « A novel approach for exhaust gas recirculation stratification in a spark-ignition engine ». Applied Thermal Engineering, vol. 266.

Nourmohammadi, Reza, Zhang, Kaiwen et Talhi, Chamseddine. 2025. « BlockFed: A novel federated learning framework based on hierarchical weighted aggregation ». In DEBS 2025 - Proceedings of the 19th ACM International Conference on Distributed and Event-Based Systems (Gothenburg, Sweden, June 10-13, 2025) pp. 134-145. Association for Computing Machinery, Inc.

Nyanyo, Felicia, Hof, Lucas, Zhao, Yaoyao Fiona et Buckenberger, Andy Andy. 2025. « Life cycle assessment of gas turbine package components using sustainable materials and robotic additive manufacturing ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Oliveira-Filho, Adaiton, Comeau, Monelle, Cave, James, Nasr, Charbel, Côté, Pavel et Tahan, Antoine. 2025. « Wind turbine SCADA data imbalance: A review of its impact on health condition analyses and mitigation strategies ». Energies, vol. 18, nº 1.
Compte des citations dans Scopus : 2.

Ollivier, Solenn, Nélisse, Hugues et Voix, Jérémie. 2025. « On the potential benefits of wide dynamic range compression for workers in loud environments: A scoping literature review ». International Journal of Occupational Safety and Ergonomics, vol. 31, nº 1. pp. 181-194.

Omidi, Narges, Houria, Manel, Monjez, Mohamed Meher, Jahazi, Mohammad, Barka, Noureddine et Ouafi, Abderrazak El. 2025. « Processing parameters optimization for enhanced mechanical strength in PBF-ed H13 tool steel: Minimizing manufacturing defects including microstructural inhomogeneity, sub-surface porosities, and oxide formation ». International Journal of Advanced Manufacturing Technology, vol. 136, nº 5. pp. 2681-2706.
Compte des citations dans Scopus : 6.

Omidi, Narges, Iltaf, Asim, Houria, Manel, Jahazi, Mohammad, Barka, Noureddine et Belzile, Claude. 2025. « Enhancing mechanical properties of additively manufactured H13: A two-step approach integrating processing parameters optimization and a tailored heat treatment ». Metals and Materials International, vol. 31, nº 5. pp. 1286-1312.
Compte des citations dans Scopus : 2.

Ould-Chikh, Nour et Thamsuwan, Ornwipa. 2025. « Revue systématique sur l’efficacité des orthèses, prothèses et exosquelettes dans la réhabilitation des troubles musculo-squelettiques du dos chez les adultes ». Affiche présentée lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).

Patin, Mathieu et Rousse, Daniel R.. 2025. « Optimizing economic performances of foundation earth-to-air heat exchangers for low-technology residential air-conditioning ». Energy and Buildings, vol. 328.
Compte des citations dans Scopus : 6.

Paul, R., Pierre, B., Zhu, C. S., Alain, L. et Guillaume, P.. 2025. « Thickness gauging using a high-temperature electromagnetic acoustic transducer with optimized magnetic field ». In SPIE Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems (Vancouver, BC, Canada, Mar. 17-20, 2025) Coll. « Proceedings of SPIE », vol. 13435. SPIE.

Pedneault-Desroches, Joël, Kahwati, Ghofril, Merkhouf, Arezki, Al-Haddad, Kamal et David, Eric. 2025. « New algorithm for rotor ground wall condition assessment of large salient-pole generators ». In IEEE Electrical Insulation Conference (EIC) (South Padre Island, TX, USA, June 08-11, 2025) Institute of Electrical and Electronics Engineers Inc..

Pedneault-Desroches, Joël, Merkhouf, Arezki, Al-Haddad, Kamal et David, Eric. 2025. « Rotor pole inter-turn insulation deterioration assessment in hydrogenerator: Methodes comparison including SFRA ». In IEEE Electrical Insulation Conference (EIC) (South Padre Island, TX, USA, June 08-11, 2025) Institute of Electrical and Electronics Engineers Inc..

Pelletier, Simon, Mongrain, Alexandre et Lalonde, Sébastien. 2025. « Modeling approach for analyzing braided shielding structures in HV cables under bending loads ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Pelletier-Huot, Maxime, Duval, Hélène, Rochette, Audrey, Imran, Ali, Braga, Rafael, Bouteiller, Yann, Varadharajan, Vivek Shankar, Beltrame, Giovanni, Abdalwhab Bakheet, Mohamed Abdalwhab, Aissaoui, Rachid et St-Onge, David. 2025. « DESSAIM ». Communication lors de la conférence : IEEE International Conference on Robotics and Automation (ICRA): Arts in Robotics (Atlanta, GA, USA, May 19-23, 2025).

Phan, Bao Vy, Bui, Quang Tri, Tran, Nguyen Duy Phuong, Dinh, Truong Hoang Vinh, Truong, Quoc Thanh et Ngo, Anh-Dung. 2025. « Design of a device using for upper limb rehabilitation of post-stroke patients ULCPM1024 ». In Proceedings of the 4th Annual International Conference on Material, Machines, and Methods for Sustainable Development (MMMS2024): Volume 3: Sustainable Approaches in Machine Design, Life Cycle Engineering, and Energy Management for Manufacturing Processes (Da Nang, Vietnam, Sept. 18-21, 2024) Coll. « Lecture Notes in Mechanical Engineering » pp. 423-429. Springer.

Pinsonnault-Skvarenina, Alexis, Nélisse, Hugues, Bonnet, Fabien, Hotton, Mathieu et Voix, Jérémie. 2025. « Evaluating the performances of direct-to-consumer hearing devices: A comparative study of electroacoustic, acoustic transparency, and passive attenuation characteristics ». Journal of the Acoustical Society of America, vol. 158, nº 5. pp. 3781-3792.

Pinto, Gabriel M., Helal, Emna, Ribeiro, Hélio, David, Eric, Demarquette, Nicole R. et Fechine, Guilhermino J. M.. 2025. « Effect of environmental temperature and semi-crystalline order on the toughening of polyamide 1010 by 2D nanomaterials ». Polymer Composites, vol. 46, nº 1. pp. 715-734.
Compte des citations dans Scopus : 1.

Pinto, Gabriel M., Staffa, Lucas, Helal, Emna, Hahn, Carolina, Vieira, Lucia, Ribeiro, Hélio, David, Eric, Demarquette, Nicole R. et Fechine, Guilhermino J. M.. 2025. « Balancing thermal conductivity, dielectric, and tribological properties in polyamide 1010 with 2D nanomaterials ». Journal of Applied Polymer Science, vol. 142, nº 1.
Compte des citations dans Scopus : 1.

Pinto, Gabriel Matheus, Delbari, Seyed-Ali, Dravigné, Julien, Bedwani, Stéphane, Helal, Emna, Demarquette, Nicole et Hof, Lucas. 2025. « Evaluating the rheological behavior of irradiated 3D-printed PLA parts for medical applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Pinto, Gabriel Matheus, Estakhrianhaghighi, Ehsan, Demarquette, Nicole, Hof, Lucas et Akbarzadeh, Abdolhamid. 2025. « Sustainable circular economy approach to utilize biodegradable wood fibers reinforced biocomposites in environmentally-benign architected materials ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Poissenot-Arrigoni, Bastien, Martin, Laurence, Negrini, Alessia, Berbiche, Djamal, Doutres, Olivier et Sgard, Franck. 2025. « Reliability of an extended version of the 3m™ Eargage tool to assess earcanal size and assist earplug selection ». International Journal of Audiology, vol. 64, nº 4. pp. 392-401.

Polotski, Vladimir et Kenné, Jean-Pierre. 2025. « Production policy optimization in manufacturing systems with long-run average cost based on vanishing discount approach ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Pourrahimi, Shamim, Milanese, Julien, Habibnejad-Korayem, Mahdi, Bocher, Philippe et Hof, Lucas A.. 2025. « Impact of powder reuse on corrosion properties in Ti-6Al-4V alloy parts fabricated by laser beam powder bed fusion ». Progress in Additive Manufacturing, vol. 10, nº 12. pp. 11849-11867.

Pourreza, Mohammad, Bouzid, Abdel-Hakim et Benfriha, Khaled. 2025. « Innovative 3D FE modeling of mechanical rolling in tube-to-tubesheet joints: A comparative analysis with hydraulic expansion ». In ASME 2025 Pressure Vessels & Piping Conference (Montreal, QC, Canada, July 20-25, 2025) Coll. « Computer Technology & Bolted Joints », vol. 2. New York, NY, USA : ASME.

Profir, Cleopatra, Tepylo, Nick, Paas, Anita et St-Onge, David. 2025. « Analysis of the importance of cognitive risk factors in professional RPAS operations ». In 44th Digital Avionics Systems Conference (DASC) (Montreal, QC, Canada, Sept. 14-18, 2025)

Radan, Lida, Songmene, Victor, Samuel, Agnes M. et Samuel, Fawzy H.. 2025. « Effects of alloy composition, hardness, and milling parameters on the cutting forces of Al-Li-based alloys ». Materials, vol. 18, nº 12.
Compte des citations dans Scopus : 1.

Rainville, C. et Lemaire, R.. 2025. « Analysis of the sooting propensity of kerosene surrogates and blends containing alcohols and esters ». In 13th Mediterranean Combustion Symposium (Corfu, Greece, June 01-05, 2025)

Rainville, C. et Lemaire, R.. 2025. « Analysis of the sooting tendency of a kerosene surrogate blended with various furans ». In Proceedings of Combustion Institute - Canadian Section, Spring Technical Meeting (Calgary, AB, Canada, May 12-15, 2025)

Rainville, Carl, Lemaire, Romain, Laflamme, Simon, Souno, Ibrahima et Seers, Patrice. 2025. « Sooting tendency of a series of kerosene surrogates and blends containing various additives considered as sustainable alternative fuels ». Energy & Fuels, vol. 39, nº 14. pp. 6991-7011.
Compte des citations dans Scopus : 2.

Rajakrishnan, Navneeth, Sadeghifar, Morteza, Bhattacharjee, Pinaki, Champliaud, Henri et Jahazi, Mohammad. 2025. « Kinetics of austenite formation in a medium-carbon, low-alloy steel with an initial martensite microstructure: Influence of prior austenite grain size ». Journal of Manufacturing and Materials Processing, vol. 9, nº 1.
Compte des citations dans Scopus : 2.

Rasolonirina, Tony, Painchaud-April, Guillaume, Le Duff, Alain et Belanger, Pierre. 2025. « Visualization of specular reflections with phase coherence imaging using sub-apertures ». Ultrasonics, vol. 155.

Rezaei, Mohammadhossein, Helal, Emna et Demarquette, Nicole R.. 2025. « Optimizing nozzle geometry for extrusion-based additive manufacturing to accommodate various grades of polyethylene ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Richard Soucy, Ruan-Isabelle, Smith, Adam W., Dupuis, Kevin, Tabiai, Ilyass et Dubé, Martine. 2025. « Large scale fused-granular-fabrication using recycled carbon fibre/PEKK-PEEK pellets derived from aerospace prepreg waste ». Composites Communications, vol. 60.

Rincón Jaramillo, Ana Maria, Yung, Marcus, Yazdani, Aamin et Thamsuwan, Ornwipa. 2025. « A review of anthropometric databases for an inclusive workforce: Constructing databases ». In Proceedings of the 22nd Congress of the International Ergonomics Association, Volume 1: Better Life Ergonomics for Future Humans (IEA 2024) (Jeju Island, Korea, Aug. 25-29, 2024) Coll. « Springer Series in Design and Innovation », vol. 39. pp. 283-290. Springer Nature.

Robert, Armel, Bisulandu, Baby-Jean Robert Mungyeko, Ilinca, Adrian et Rousse, Daniel R.. 2025. « Hybrid wind-redox flow battery system for decarbonizing off-grid mining operations ». Applied Sciences, vol. 15, nº 13.
Compte des citations dans Scopus : 1.

Rodger, Melanie, Lerouge, Sophie et Ahmadi, Ali. 2025. « Optimizing pectin-stabilized albumin-based foams for enhanced support bath stability in in-foam embedded bioprinting ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Romdhane, Sarra Fekih, Zhang, Kaiwen et De Santa-Eulalia, Luis Antonio. 2025. « Towards efficient and fine-grained traceability for a live lobster supply chain using blockchain technology ». In 6th International Conference on Industry 4.0 and Smart Manufacturing (Prague, Czech Republic, Nov. 20-22, 2024) Coll. « Procedia Computer Science », vol. 253. pp. 612-625. Elsevier.
Compte des citations dans Scopus : 4.

Rousseau, Rashique Iftekhar et Bouzid, Abdel-Hakim. 2025. « Effect of clamped member material and thickness on bolt self-loosening under transverse loads ». Materials, vol. 18, nº 2.
Compte des citations dans Scopus : 1.

Sadeghifar, Morteza, Billardon, Rene, Delagnes, Denis, Champliaud, Henri, Tahan, Antoine et Jahazi, Mohammad. 2025. « Addressing viscosity-driven singularities: Accurate development of thermo-elasto-visco-plastic constitutive models ». Mechanics of Time-Dependent Materials, vol. 29, nº 4.

SaediArdahaei, Saeid et Pham, Xuan-Tan. 2025. « Multi-response optimization of aluminum laser spot welding with sinusoidal and cosinusoidal power profiles based on Taguchi-Grey relational analysis ». Materials, vol. 18, nº 13.

Safarbati, Rafik, Jahazi, Mohammad et Dourandish, Simin. 2025. « Full field modeling of austenite grain growth using the level set method ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Salas Gordoniz, Jorge Esteban, Saad, Maarouf et St-Onge, David. 2025. « Simple tuning for an adaptive and model-free control of indoor airships ». Journal of Computational and Nonlinear Dynamics, vol. 20, nº 8.

Salazar, Gamaliel, Lemyre-Baron, Jean-Sebastien, Jahazi, Mohammad, Champliaud, Henri et Tahan, Antoine. 2025. « Analysis of cooling regimes as a function of Biot number during quenching by immersion ». Heat Transfer.
(Sous presse)

Salazar, Gamaliel, Lemyre-Baron, Jean-Sébastien, Jahazi, Mohammad, Champliaud, Henri et Tahan, Antoine. 2025. « Analysis of geometry orientation in the calculation of transient heat fluxes during immersion quenching of hollow cylinder ». In QDE 2025: Proceedings of the 3rd International Conference on Quenching and Distortion Engineering (Vancouver, BC, Canada, May 06-07, 2025) pp. 133-140. ASM International.

Salazar, Gamaliel, Lemyre-Baron, Jean-Sébastien, Jahazi, Mohammad, Champliaud, Henri et Tahan, Antoine. 2025. « Determination of thermal boundary conditions using piecewise hermite polynomials during the air transfer step of an industrial quenching process ». Journal of Thermal Science and Engineering Applications, vol. 17, nº 9.

Saloux, Etienne, Candanedo, José A., Vallianos, Charalampos, Morovat, Navid et Zhang, Kun. 2025. « From theory to practice: A critical review of model predictive control field implementations in the built environment ». Applied Energy, vol. 393.
Compte des citations dans Scopus : 6.

Sani, Iman Shirzaei, Demarquette, Nicole R. et David, Eric. 2025. « Enhancing the dielectric properties of recycled polyolefin streams through blending ». Sustainability, vol. 17, nº 9.

Santamaria, Jorge, Bierrenbach-Lima, André, Sanjosé, Marlène et Moreau, Stéphane. 2025. « Shape considerations for the design of propellers with trailing edge serrations ». Journal of Sound and Vibration, vol. 595.
Compte des citations dans Scopus : 1.

Segers, Thibaut, Cohic, Antoine, Montes de Oca, Carlos Silva et Thamsuwan, Ornwipa. 2025. « Évaluation de l’efficacité d’un exosquelette de soutien dorsal passif sur l’activité musculaire ». Affiche présentée lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).

Sendra, T. et Belanger, P.. 2025. « On the use of a Transformer Neural Network to deconvolve ultrasonic signals ». Ultrasonics, vol. 152.
Compte des citations dans Scopus : 2.

Sepahi, Nima, Ilinca, Adrian et Rousse, Daniel R.. 2025. « Multi-criteria decision analysis for evaluating carbon capture technologies in power plants ». Renewable and Sustainable Energy Reviews, vol. 219.
Compte des citations dans Scopus : 5.

Serre, Rémy, Nadot-Martin, Carole et Bocher, Philippe. 2025. « Equivalent Inclusion Method (EIM) for isotropic and anisotropic spatially oriented spheroidal inhomogeneities: A unified calculation module validated via comparisons to Finite Element (FE) simulations ». Mechanics of Materials, vol. 201.
Compte des citations dans Scopus : 1.

Seyed Hosseini, Seyed Hamed, Hajzargarbashi, Seyedhossein, Côté, Gabriel et Liu, Zhaoheng. 2025. « Transfer learning approach for estimating modal parameters of robot manipulators using minimal experimental data ». Vibration, vol. 8, nº 4.

Seyed Hosseini, Seyed Hamed, Hajzargarbashi, Seyedhossein et Liu, Zhaoheng. 2025. « Enhancing robotic manipulator performance through analyzing vibration, identifying deep-learning-based modal parameters, and estimating frequency response functions ». International Journal of Advanced Manufacturing Technology.
Compte des citations dans Scopus : 1. (Sous presse)

Shahcheraghian, Amir, Ilinca, Adrian et Sommerfeldt, Nelson. 2025. « K-means and agglomerative clustering for source-load mapping in distributed district heating planning ». Energy Conversion and Management: X, vol. 25.
Compte des citations dans Scopus : 10.

Shboul, Ahmad Al et Izquierdo, Ricardo. 2025. « Innovative sensor technologies for monitoring food and healthcare applications ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Shboul, Ahmad Al, Mechai, Fazia et Izquierdo, Ricardo. 2025. « Impact of pH on room-temperature synthesis of zinc oxide nanoparticles for developing flexible gas sensors ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Shekar, Arjun Chandra, Sawalmeh, Atef, Zitoune, Redouane et Hof, Lucas A.. 2025. « Optimization of surface texturing parameters in additively manufactured continuous fiber composites using abrasive waterjet technique for composite repair applications ». Composites Part A: Applied Science and Manufacturing, vol. 190.
Compte des citations dans Scopus : 2.

Shekar, Arjun Chandra, Todescato, Marco, Leclair, Jean-Philippe, Sorgato, Marco, Zitoune, Redouane et Hof, Lucas A. 2025. « Studies on additive manufacturing for polymer repair: Material extrusion and reverse engineering approaches ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Sheremetyev, V., Lezin, V., Lukashevich, K., Prokoshkin, S. et Brailovski, V.. 2025. « Improving superelasticity of a laser powder bed-fused Ti-Zr-Nb alloy via the ingot composition adjustments ». Materials Letters, vol. 398.

Shi, Jiahao, Ju, Kang, Chen, Haoyu, Orsat, Valerie, Sasmito, Agus P., Ahmadi, Ali et Akbarzadeh, Abdolhamid. 2025. « Ultrahigh piezoelectricity in truss-based ferroelectric ceramics metamaterials ». Advanced Functional Materials, vol. 35, nº 12.

Shi, Jiahao, Ju, Kang, Chen, Haoyu, Orsat, Valerie, Sasmito, Agus, Ahmadi, Ali et Akbarzadeh, Hamid. 2025. « Ultrahigh piezoelectricity in ferroelectric ceramic truss-based metamaterial ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Shokrollahi, Maryam, Smith, Adam W., Levy, Arthur, Dubé, Martine et Tabiai, Ilyass. 2025. « Reassessing anisotropy in 3D printed structures: The role of extrudate geometry vs interface bonding ». Journal of Manufacturing Processes, vol. 149. pp. 456-472.

Shokrollahi, Maryam, Vassal, Orlane, Dubé, Martine et Tabiai, Ilyass. 2025. « Impact of nozzle length and extrusion speed on tensile properties of FFF-printed filaments ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Simard, Alexandre, Cirino, Fabiana, Levesque, Mélanie, Lachance, Mathieu, Iqbal, Fawaz et David, Eric. 2025. « In-depth analysis of partial discharge measurements performed with two different instruments on individual stator coils ». In IEEE Electrical Insulation Conference (EIC) (South Padre Island, TX, USA, June 08-11, 2025) Institute of Electrical and Electronics Engineers Inc..

Slamani, Mohamed, Chatelain, Jean-François et Jammel, Siwar. 2025. « The effect of lubricant and nanofiller additives on drilling temperature in GFRP composites ». Journal of Composites Science, vol. 9, nº 10.

Slamani, Mohamed, Elhadi, Abdelmalek, Amroune, Salah, Arslane, Mustapha, Alothman, Othman Y., Awayssa, Omar, Chatelain, Jean-François et Jawaid, Mohammad. 2025. « Analysis of entry and exit hole delaminations during drilling of jute/palm fiber reinforced hybrid composites using HSS drill bits ». Journal of Natural Fibers, vol. 22, nº 1.
Compte des citations dans Scopus : 3.

Slamani, Mohamed, Elhadi, Abdelmalek, Amroune, Salah, Arslane, Mustapha, Zaoui, Moussa, Alrasheedi, Nashmi, Louhichi, Borhen et Chatelain, Jean-François. 2025. « Bootstrap analysis for predicting circularity and cylindricity errors in palm/jute fiber reinforced hybrid composites ». Measurement: Journal of the International Measurement Confederation, vol. 249.
Compte des citations dans Scopus : 2.

Slamani, Mohamed, Jammel, Siwar et Chatelain, Jean-François. 2025. « Effects of wax and graphene concentrations on cutting force in drilling GFRP composites: A comprehensive study using a full factorial design of experiments ». Journal of Composite Materials.
Compte des citations dans Scopus : 2. (Sous presse)

Smith, A. W., Pattery, H., Canart, J. P., Tabiai, I. et Dubé, M.. 2025. « Upcycling of unidirectional carbon-fibre/PEEK prepreg trim waste ». Composites Part A: Applied Science and Manufacturing, vol. 198.
Compte des citations dans Scopus : 1.

Soares, Matheus, Campion, Donatien, Brailovski, Vladimir et Kreitcberg, Alena. 2025. « In-situ monitoring of LPBF metal process using a dual-wavelength thermal camera compared to numerical simulations and experimental measurements ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Sokakini, Soumaya, Simo Tala, Jules Voguelin, Nadau, Lionel, Ilinca, Adrian et Bougeard, Daniel. 2025. « Heat transfer enhancement in shell and tube Latent Heat Thermal Energy Storage units for waste heat recovery applications: A 3D numerical study on melting–solidification kinetics ». Applied Thermal Engineering, vol. 274, nº Part B.
Compte des citations dans Scopus : 8.

Sokakini, Soumaya, Tala, Jules Voguelin Simo, Nadau, Lionel, Ilinca, Adrian et Bougeard, Daniel. 2025. « Numerical analysis of partial charging effect in a latent heat thermal energy storage unit ». In Proceedings of the CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025) Coll. « Progress in Canadian Mechanical Engineering », vol. 8.

Sotelo, Silvia Castillo, Ouellet-Plamondon, Claudiane, Hof, Lucas et Etxeberria, Miren. 2025. « Design of eco-efficient printable mortar mixes incorporating eggshell residues ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Souza, Ziani Santana Bandeira De, Fechine, Guilhermino José Macêdo, Sobrinho, Maurício Alves Da Motta, David, Éric et Demarquette, Nicole Raymonde. 2025. « Impact of preparation methods on dielectric and mechanical properties of graphene-epoxy nanocomposites ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Sripada, Jagannadh, Thibault, Alexis, Bocher, Philippe, Béland, Jean-François, Vo, Phuong et Irissou, Éric. 2025. « Influence of pulsed laser ablation parameters on adhesion of cold spray Al 6061 coatings on extruded Al 6061 substrates ». In Thermal Spray 2025 - Sustainable Innovations in Thermal Spray Technology: Pioneering A Greener Future, Proceedings from the International Thermal Spray Conference and Exposition (Vancouver, BC, Canada, May 05-08, 2025) pp. 413-419. ASM International.

St-Onge, David. 2025. « Beyond the stars, onto the stage: Robotics in art and space ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Strugova, Daria, David, Eric et Demarquette, Nicole R.. 2025. « Extensional rheology of PP/PS/MWCNT electrically conductive polymer composites: Impact on electrical properties ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Strugova, Daria, Sultana, S. M. Nourin, Leclair, Jean-Philippe, David, Éric, Demarquette, Nicole R., Paserin, Vladimir et Hof, Lucas A.. 2025. « Polymer blends as a tool to improve mechanical properties and printability of metal-filled polymer filaments for material extrusion additive manufacturing in the context of sustainable manufacturing ». Journal of Manufacturing Processes, vol. 156, nº Part A. pp. 611-626.

Sylvain, William, Haillot, Didier et Monfet, Danielle. 2025. « Regard sur les performances en agriculture en environnement contrôlé : Indicateurs clés et applications ». Communication lors de la conférence : 92e Congrès de l'Acfas (Montréal, QC, Canada, 05-09 mai 2025).

Tardy, Adrien, Rousse, Daniel R., Mungyeko Bisulandu, Baby-Jean Robert et Ilinca, Adrian. 2025. « Enhancing energy sustainability in remote mining operations through wind and pumped-hydro storage; Application to Raglan Mine, Canada ». Energies, vol. 18, nº 9.
Compte des citations dans Scopus : 3.

Tayefi, Masoud, Eesaee, Mostafa, Hassanipour, Meysam, Elkoun, Said, David, Eric et Nguyen-Tri, Phuong. 2025. « Thermal aging behavior and lifetime prediction of industrial elastomeric compounds based on styrene-butadiene rubber ». Polymer Engineering and Science.
Compte des citations dans Scopus : 3. (Sous presse)

Thamsuwan, Ornwipa et Cherik, Katia. 2025. « Assessment of heart rate variability among plant nursery workers ». Journal of Agromedicine.
(Sous presse)

Thibault, S. et Bélanger, P.. 2025. « Lite transformer for ultrasonic signal processing ». In SPIE Smart Structures + Nondestructive Evaluation (Vancouver, BC, Canada, Mar. 17-20, 2025) Coll. « Proceedings of SPIE », vol. 13438. SPIE.

Thon, Aurelien, Painchaud-April, Guillaume, Le Duff, Alain et Bélanger, Pierre. 2025. « U-NET autoencoder for amplitude recovery on binarized Full Matrix Captures ». NDT and E International, vol. 156.

Tofighi, Ali, Zhu, Linbo et Bouzid, Abdel-Hakim. 2025. « Elastic interaction of bolted flange joints during untightening ». In ASME 2025 Pressure Vessels & Piping Conference (Montreal, QC, Canada, July 20-25, 2025) Montreal, QC, Canada : American Society of Mechanical Engineers (ASME).

Tolouei, Ehsan, Hurel, Valentin, Loucif, Abdelhalim, Morin, Jean-Benoit et Jahazi, Mohammad. 2025. « Influence of the as-quenched state and tempering heating rate on microstructural characteristics of a high-strength steel ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science.
Compte des citations dans Scopus : 1. (Sous presse)

Tolouei, Ehsan, Hurel, Valentin, Mirzaei, Sajad, Morin, Jean-Benoit et Jahazi, Mohammad. 2025. « Influence of holding times on the tempering mechanisms of bainitic microstructure ». Materials Science and Technology.
(Sous presse)

Tolouei, Ehsan, Saadati, Mohammad, Morin, Jean -Benoit, Garcia-Mateo, Carlos et Jahazi, Mohammad. 2025. « Influence of bainitic transformation temperature on microstructure evolution during isothermal holding and subsequent cooling ». Materials Chemistry and Physics, vol. 345.

Tolouei, Ehsan, Saadati, Mohammad, Morin, Jean-Benoit, Garcia-Mateo, Carlos et Jahazi, Mohammad. 2025. « Influence of isothermal bainitic phase transformation temperature on the microstructure and hardness evolution of medium-carbon high strength steel ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Touani Kameni, Francesco, Badr, Sara, Vigouroux, Yohann, Madadian, Elias, Ahmadi, Ali et Lerouge, Sophie. 2025. « Injectable cryopreservable alginate-gelatin microbeads for pro-angiogenic cell therapy ». ACS Biomaterials Science and Engineering, vol. 11, nº 11. pp. 6645-6656.

Touani, Francesco K., Hamouda, Inès, Noiseux, Nicolas, Hoesli, Corinne, Sarkissian, Shant Der et Lerouge, Sophie. 2025. « Injectable, cryopreservable mesenchymal stromal cell-loaded microbeads for pro-angiogenic therapy: In vitro proof-of-concept ». Biomedical Materials, vol. 20, nº 1.
Compte des citations dans Scopus : 1.

Toutlini, Nour-Eddine, Beljadid, Abdelaziz et Soulaimani, Azzeddine. 2025. « A semi-implicit second-order temporal scheme for solving the pressure head-based form of Richards' and advection-dispersion equations ». Computers and Mathematics with Applications, vol. 187. pp. 106-131.
Compte des citations dans Scopus : 4.

Turnier Trottier, William, Collin, Antoine, Krick, Thierry et Brailovski, Vladimir. 2025. « LPBF-Produced elastomeric lattice structures for personal protection equipment: Mechanical performance versus comfort-related attributes ». Journal of Manufacturing and Materials Processing, vol. 9, nº 6.

Ullah, Irfan, Akinlabi, Esther Titilayo, Kouam, Jules et Songmene, Victor. 2025. « A comprehensive experimental investigation on the correlation between chip formation, machined surface integrity, and particle emissions during high-speed milling of TC4 titanium alloy ». International Journal of Advanced Manufacturing Technology, vol. 136, nº 7-8. pp. 3285-3301.
Compte des citations dans Scopus : 2.

Valdesse Eko'Ola, V. et Nadeau, S.. 2025. « Systematic selection of visual and cognitive assistance equipment: Case of gas turbine assembly in narrow spaces ». Intelligent control and automation, vol. 16, nº 3. pp. 80-109.

Valtchanov, Hristo, Piche, Nicolas, Brailovski, Vladimir, Byers, Justin, Desrosiers, Catherine et Guibault, Francois. 2025. « Accurate reconstruction of gas turbine blade geometry using 3D/2D rigid-registration and CT view optimization ». e-Journal of Nondestructive Testing, vol. 30, nº 2.

Villeneuve, Guillaume, Leclair, Jean-Philippe, Wuthrich, Rolf et Hof, Lucas A.. 2025. « Precision machining of glass in the submillimeter scale using thermochemically-assisted grinding ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Voix, Jérémie, Bernier, Antoine et Bonnet, Fabien (inventeurs) 9 septembre 2025. « System and method to perform in-ear noise dosimetry and personal attenuation rating under an electro-acoustic earplug while excluding wearer-induced disturbances and separating exposure sources ». École de technologie supérieure (titulaire(s)). Brevet américain US 12,413,920 B2. [Disponible sur US Patent and Trademark Office (USPTO) https://www.uspto.gov/patents/search/patent-public-search].

Vu, Viet-Hung, Huynh, Liem, Chaudhry, Shubham et Liu, Zhaoheng. 2025. « Experimental and numerical modal analysis of a honeycomb panel for aircraft structures application ». In ASME 2025 Aerospace Structures, Structural Dynamics, and Materials Conference (Houston, TX, USA, May 05-07, 2025) American Society of Mechanical Engineers (ASME).

Xing, Kanglin, Bonev, Ilian A., Liu, Zhaoheng et Champliaud, Henri. 2025. « Influence of vibration and out-of-plane motion on ballbar measurement accuracy ». International Journal of Advanced Manufacturing Technology.
(Sous presse)

Xing, Kanglin, Cianyi, Yannick, Bonev, Ilian A., Champliaud, Henri et Liu, Zhaoheng. 2025. « Offline circular path error measurement and compensation for robotic machining applications ». Measurement Science and Technology, vol. 36, nº 10.

Xing, Kanglin, Feng, Miao, Bonev, Ilian A., Champliaud, Henri, Cheriet, Mohamed et Liu, Zhaoheng. 2025. « XGBoost-based digital twin model for predicting trajectory errors in a hexapod coordinated machining system using positioning accuracy and vibration data ». Sensors, vol. 25, nº 23.

Youssef, Farah, Hallé, Stéphane et D'Avignon, Katherine. 2025. « Modeling heat loss through sweating: Towards improved heat load prediction from child occupants ». Energy and Buildings, vol. 342.
Compte des citations dans Scopus : 1.

Zaessinger, Judith, Strugova, Daria, Demarquette, Nicole et Bellehumeur, Celine. 2025. « Rheological investigation of the miscibility of LLDPE-LDPE: Influence of molecular weight, comonomer content and chain branching ». Communication lors de la conférence : CSME-CFDSC-CSR 2025 International Congress (Montreal, QC, Canada, May 25-28, 2025).

Zeinab Aliahmadi, Seyed, Jabbarzadeh, Armin et Hof, Lucas A.. 2025. « A multi-objective optimization approach for sustainable and personalized trip planning: A self-adaptive evolutionary algorithm with case study ». Expert Systems with Applications, vol. 261.
Compte des citations dans Scopus : 8.

Zhou, Ziyang, Moreau, Stephane et Sanjose, Marlene. 2025. « Installation effects on airfoil self-noise estimated by direct numerical simulations ». Journal of Sound and Vibration, vol. 604.
Compte des citations dans Scopus : 2.

Zibetti, Elisabetta, Mercader, Alexandra, Duval, Hélène, Levillain, Florent, Rochette, Audrey et St-Onge, David. 2025. « Shaping expressiveness in robotics: The role of design tools in crafting embodied robot movements ». In 2025 34th IEEE International Conference on Robot and Human Interactive Communication (RO-MAN) (Eindhoven, Netherlands, Aug. 25-29, 2025) pp. 755-761. Institute of Electrical and Electonics Engineers Inc..

Zohourfazeli, Mohammadamin, Hosseinzadeh, Pakshid, Madadian, Elias, Badr, Sara, Lerouge, Sophie et Ahmadi, Ali. 2025. « Development of an on-demand foaming printhead for biofabrication of constructs with heterogeneous porosity ». Bioprinting, vol. 52.