| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Liste des publications de "Songmene, Victor"Nombre de documents archivés : 278. 2024
Barakat, H., Zedan, Y., Samuel, A. M., Songmene, V. et Samuel, F. H..
2024.
« Parameters controlling drilling and tapping characteristics of aluminum based alloys ».
In Light Metals (Orlando, FL, USA, Mar. 03-07, 2024)
Coll. « Minerals, Metals and Materials Series »
pp. 313-325.
Springer.
Mateur, Wael, Songmene, Victor et Kouam, Jules.
2024.
« Experimental investigation on the effects of tool geometry and cutting conditions on machining behavior during edge finishing of granite using concave and chamfered profiling tools ».
Micromachines, vol. 15, nº 3.
Ullah, Irfan, Akinlabi, Esther Titilayo et Songmene, Victor.
2024.
« Thermo-metallo-mechanical based phase transformation modeling for high-speed milling of Ti–6Al–4V through stress-strain and temperature effects ».
Journal of Materials Research and Technology, vol. 30.
pp. 894-909. 2023
Bedard, Frederic, Loucif, Abdelhalim, Jahazi, Mohammad et Songmene, Victor.
2023.
« Microstructural damage during electrical discharge machining of a high silicon aluminum alloy for space applications ».
International Journal of Advanced Manufacturing Technology, vol. 128, nº 5-6.
pp. 2311-2317.
Dongmo Tambah, Kevin Gildas, Kenné, Jean-Pierre et Songmene, Victor.
2023.
« Preventive maintenance and silica exposure limits integrated in the production planning of a granite processing unit ».
Journal of Quality in Maintenance Engineering, vol. 29, nº 1.
pp. 1-26.
Girgis, Abram, Samuel, Ehab, Samuel, Agnes M., Songmene, Victor et Samuel, Fawzy H..
2023.
« Effect of Cu content on the alloy tensile properties of Al-Cu based alloys tested at 25 degrees C and 250 degrees C: Application of the concept of quality index ».
Materials, vol. 16, nº 4.
Mohamed, A. M. A., Samuel, E., Samuel, A. M., Samuel, F. H., Songmene, V. et Doty, H. W..
2023.
« Effect of intermetallics and tramp elements on porosity formation and hardness of Al-Si-Mg and Al-Si-Cu-Mg alloys ».
International Journal of Metalcasting, vol. 17, nº 2.
pp. 664-681.
Mohamed, A. M. A., Zedan, Y., Samuel, A. M., Doty, H. W., Songmene, V. et Samuel, F. H..
2023.
« Effect of free cutting elements on the microstructural evaluation and mechanical properties of Al–Si cast alloys ».
International Journal of Metalcasting, vol. 17, nº 2.
pp. 959-979.
Radan, Lida, Songmene, Victor, Zedan, Yasser et Samuel, Fawzy H..
2023.
« Investigating the effect of heat treatment on the microstructure and hardness of aluminum-lithium alloys ».
Materials, vol. 16, nº 19.
Sadeghifar, Morteza, Javidikia, Mahshad, Loucif, Abdelhalim, Jahazi, Mohammad et Songmene, Victor.
2023.
« Experimental and numerical analyses of residual stress redistributions in large steel dies: Influence of tempering cycles and rough milling ».
Journal of Materials Research and Technology, vol. 24.
pp. 395-406.
Samuel, Agnes M., Samuel, Ehab, Songmene, Victor et Samuel, Fawzy H..
2023.
« A comparative study of grain refining of Al-(7–17%) Si cast alloys using Al-10% Ti and Al-4% B master alloys ».
Materials, vol. 16, nº 7.
Samuel, Agnes M., Samuel, Ehab, Songmene, Victor et Samuel, Fawzy H..
2023.
« A review on porosity formation in aluminum-based alloys ».
Materials, vol. 16, nº 5.
Samuel, Ehab, Samuel, Agnes M., Songmene, Victor et Samuel, Fawzy H..
2023.
« A review on the analysis of thermal and thermodynamic aspects of grain refinement of aluminum-silicon-based alloys ».
Materials, vol. 16, nº 16.
Tahmasbi, Ali, Samuel, Agnes M., Zedan, Yasser, Songmene, Victor et Samuel, Fawzy H..
2023.
« Effect of aging treatment on the strength and microstructure of 7075-based alloys containing 2% Li and/or 0.12% Sc ».
Materials, vol. 16, nº 23.
Tcheuhebou Tina, Sandrine A., Javidikia, Mahshad, Jahazi, Mohammad et Songmene, Victor.
2023.
« The influence of tool geometry parameters on thermo-mechanical loads and residual stresses induced by orthogonal cutting of AA6061-T6: A numerical investigation ».
Processes, vol. 11, nº 4.
2022
Abdelaziz, Mohamed H., Samuel, Agnes M., Doty, Herbert W., Songmene, Victor et Samuel, Fawzy H..
2022.
« Mechanical performance and precipitation behavior in Al-Si-Cu-Mg cast alloys: Effect of prolonged thermal exposure ».
Materials, vol. 15, nº 8.
Bahri, Haithem, Songmene, Victor et Kouam, Jules.
2022.
« Experimental investigation on part quality and dust emission during minimum quantity lubricated (MQL) edge finishing of granite ».
Micromachines, vol. 13, nº 10.
El-Hadad, Shimaa, Samuel, Agnes M., Samuel, Fawzy H., Doty, Herbert W. et Songmene, Victor.
2022.
« Effect of Bi and Ca on the solidification parameters of Sr-Modified Al-S-Cu (Mg) alloys ».
Materials, vol. 15, nº 19.
Hernandez-Sandoval, J., Zedan, Y., Songmene, V., Abdelaziz, M. H., Samuel, F. H. et Garza-Elizondo, G. H..
2022.
« Effect of minor addition of Ni and Zr on the high-temperature performance of Al-Si-Cu-Mg cast alloys ».
International journal of metalcasting, vol. 16, nº 3.
pp. 1235-1251.
Kouam, Jules, Songmene, Victor, Bahloul, Ali et Samuel, Agnes M..
2022.
« Characterization of Si and SiO2 in dust emitted during granite polishing as a function of cutting conditions ».
Materials, vol. 15, nº 11.
Mahmoud, M. G., Zedan, Y., Samuel, A. M., Doty, H. W., Songmene, V. et Samuel, F. H..
2022.
« Effect of rare earth metals (Ce and La) addition on the performance of Al-Si-Cu-Mg Cast Alloys ».
International Journal of Metalcasting, vol. 16, nº 3.
pp. 1164-1190.
Mahmoud, M. G., Zedan, Y., Samuel, A. M., Songmene, V. et Samuel, F. H..
2022.
« The use of rare earth metals in AlSiCu casting alloys ».
International Journal of Metalcasting, vol. 16, nº 2.
pp. 535-552.
Sadeghifar, Morteza, Javidikia, Mahshad, Songmene, Victor et Jahazi, Mohammad.
2022.
« A comparative analysis of chip shape, residual stresses, and surface roughness in minimum-quantity-lubrication turning with various flow rates ».
International Journal of Advanced Manufacturing Technology, vol. 121, nº 5-6.
pp. 3977-3987.
Salem, S., Hamed, M., Zedan, Y., Samuel, A. M., Doty, H. W., Songmene, V. et Samuel, F. H..
2022.
« Evolution and methods of residual stresses measurement in Al-Si-Cu-Mg Castings : Role of heat treatment ».
International Journal of Metalcasting, vol. 16, nº 3.
pp. 1488-1506.
Samuel, A. M., Zedan, Y., Doty, H. W., Songmene, V. et Samuel, F. H..
2022.
« Role of the addition of La and Ce on the cooling characteristics and porosity formation in A356 and A413 alloys ».
International Journal of Metalcasting, vol. 16, nº 2.
pp. 553-572.
Samuel, Ehab, Nabawy, Ahmed M., Samuel, Agnes M., Doty, Herbert W., Songmene, Victor et Samuel, Fawzy H..
2022.
« Effect of Zr and Ti addition and aging treatment on the microstructure and tensile properties of Al-2%Cu-based alloys ».
Materials, vol. 15, nº 13.
Sougavabar, Mahmoud Alipour, Niknam, Seyed Ali, Davoodi, Behnam et Songmene, Victor.
2022.
« Milling Al520-MMC reinforced with SiC particles and additive elements Bi and Sn ».
Materials, vol. 15, nº 4.
Tagiuri, Zakaria Ahmed M., Dao, Thien-My, Samuel, Agnes Marie et Songmene, Victor.
2022.
« A numerical model for predicting the effect of tool nose radius on machining process performance during orthogonal cutting of AISI 1045 Steel ».
Materials, vol. 15, nº 9.
Tagiuri, Zakaria Ahmed M., Dao, Thien-My, Samuel, Agnes Marie et Songmene, Victor.
2022.
« Numerical prediction of the performance of chamfered and sharp cutting tools during orthogonal cutting of AISI 1045 steel ».
Processes, vol. 10, nº 11.
Zedan, Y., Songmene, V., Samuel, A. M., Samuel, F. H. et Doty, H. W..
2022.
« Effects of free-cutting elements addition on the microstructure, hardness, and machinability of Al-11%Si-Cu-Mg casting alloys ».
International Journal of Metalcasting, vol. 16, nº 4.
pp. 1915-1931.
Zedan, Yasser, Garza-Elizondo, Guillermo H., Tash, Mahmoud, Samuel, Agnes M., Doty, Herbert W., Songmene, Victor et Samuel, Fawzy Hosny.
2022.
« Effect of intermetallics and drill materials on the machinability of Al-Si cast alloys ».
Materials, vol. 15, nº 3.
Zedan, Yasser, Samuel, Agnes M., Doty, Herbert W., Songmene, Victor et Samuel, Fawzy H..
2022.
« Effects of trace elements on the microstructural and machinability characteristics of AlSiCuMg castings ».
Materials, vol. 15, nº 1.
Zedan, Yasser, Songmene, Victor, Samuel, Agnes M., Samuel, Fawzy H. et Doty, Herbert W..
2022.
« Assessment of the influence of additives on the mechanical properties and machinability of Al-11%Si cast alloys: Application of DOE and ANOVA methods ».
Materials, vol. 15, nº 9.
2021
Bahri, Haithem, Songmene, Victor, Kouam, Jules, Samuel, Agnes Marie et Samuel, Fawzy Hosny.
2021.
« CNC edge finishing of granite: Effect of machining conditions on part quality, cutting forces, and particle emissions ».
Materials, vol. 14, nº 21.
Elgnemi, Tarek, Songmene, Victor, Kouam, Jules, Jun, Martin B. G. et Samuel, Agnes Marie.
2021.
« Experimental investigation on dry routing of CFRP composite: Temperature, forces, tool wear, and fine dust emission ».
Materials, vol. 14, nº 19.
Elgnemi, Tarek-Shaban-Mohamed, Jun, Martin Byung-Guk, Songmene, Victor et Samuel, Agnes Marie.
2021.
« Milling performance of CFRP composite and atomised vegetable oil as a function of fiber orientation ».
Materials, vol. 14, nº 8.
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad.
2021.
« 3D FE modeling and experimental analysis of residual stresses and machining characteristics induced by dry, MQL, and wet turning of AA6061-T6 ».
Machining Science and Technology, vol. 25, nº 6.
pp. 957-983.
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad.
2021.
« Analysis and optimization of surface roughness in turning of AA6061-T6 under various environments and parameters ».
In 9th CIRP Conference on High Performance Cutting (En ligne, May 24-26, 2021)
Coll. « Procedia CIRP », vol. 101.
pp. 17-20.
Elsevier.
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad.
2021.
« Low and high speed orthogonal cutting of AA6061-T6 under dry and flood-coolant modes: Tool wear and residual stress measurements and predictions ».
Materials, vol. 14, nº 15.
Marani, Mohsen, Zeinali, Mohammadjavad, Songmene, Victor et Mechefske, Chris K..
2021.
« Tool wear prediction in high-speed turning of a steel alloy using long short-term memory modelling ».
Measurement: Journal of the International Measurement Confederation, vol. 177.
pp. 704-713.
Mohamed-Amine, Alliche, Mohamed, Djennane, Abdelhakim, Djebara et Songmene, Victor.
2021.
« Predictive analytical modeling of thermo-mechanical effects in orthogonal machining ».
Materials, vol. 14, nº 24.
Olufayo, Oluwole, Songmene, Victor, Kenné, Jean-Pierre et Ayomoh, Michael.
2021.
« Modelling for cost and productivity optimisation in sustainable manufacturing: a case of dry versus wet machining of mould steels ».
International Journal of Production Research, vol. 59, nº 17.
pp. 5352-5371.
Samuel, Agnes, Zedan, Yasser, Doty, Herbert, Songmene, Victor et Samuel, Fawzy H..
2021.
« A review study on the main sources of porosity in Al-Si cast alloys ».
Advances in Materials Science and Engineering, vol. 2021.
Tran, Dinh Son, Songmene, Victor et Ngo, Anh Dung.
2021.
« Regression and ANFIS-based models for predicting of surface roughness and thrust force during drilling of biocomposites ».
Neural Computing and Applications, vol. 33.
pp. 11721-11738.
Zedan, Yasser, Jabbari, Keyhan, Niknam, Seyed A. et Songmene, Victor.
2021.
« Machinability study of AA6061 under various heat treatment conditions ».
Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, vol. 45.
pp. 543-553. 2020
Anagonou, Augias, Godjo, Thierry, Songmene, Victor et Tankpinou, Yvette.
2020.
« Étude des propriétés physico-mécaniques d’un béton hydraulique contenant des cendres de coques d’anacarde de tailles micrométriques et nanométriques substituant partiellement le ciment ».
Déchets Sciences et Techniques, nº 83.
pp. 39-48.
Anagonou, Augias, Songmene, Victor, Godjo, Thierry et Kouam, Jules.
2020.
« Recycling of West african cashew nut shells waste in asphalt concrete: Impact on the physico-mechanical properties of asphalt concrete ».
International Journal of Advanced Research and Publications, vol. 4, nº 2.
pp. 96-106.
Bédard, Frédéric, Jahazi, Mohammad et Songmene, Victor.
2020.
« Die-sinking EDM of Al6061-T6: interactions between process parameters, process performance, and surface characteristics ».
International Journal of Advanced Manufacturing Technology, vol. 107, nº 1-2.
pp. 333-342.
Chaieb, Oussama, Olufayo, Oluwole A., Songmene, Victor et Jahazi, Mohammad.
2020.
« Investigation on surface quality of a rapidly solidified Al–50%Si alloy component for deep-space applications ».
Materials, vol. 13, nº 15.
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad. 2020. « 3D Finite element simulation of residual stresses induced by wet turning of AA6061-T6 ». Affiche numéro 49 présentée lors de la conférence : 17th Encyclopaedia Archives Encyclopaedia of Research on Aluminium in Québec REGAL Students' Day = 17e Encyclopédie de la Recherche sur l’Aluminium au Québec : Journée des étudiants du REGAL (En ligne, Nov. 05-06, 2020).
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad.
2020.
« Effect of turning environments and parameters on surface integrity of AA6061-T6: experimental analysis, predictive modeling, and multi-criteria optimization ».
The International Journal of Advanced Manufacturing Technology, vol. 110, nº 9.
pp. 2669-2683.
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad.
2020.
« On the impacts of tool geometry and cutting conditions in straight turning of aluminum alloys 6061-T6: an experimentally validated numerical study ».
International Journal of Advanced Manufacturing Technology, vol. 106, nº 9-10.
4547–4565.
Marani, Mohsen, Songmene, Victor, Zeinali, Mohammadjavad, Kouam, Jules et Zedan, Yasser.
2020.
« Neuro-fuzzy predictive model for surface roughness and cutting force of machined Al20 Mg2Si2Cu metal matrix composite using additives ».
Neural Computing and Applications, vol. 32.
pp. 8115-8126.
Marani, Mohsen, Zeinali, Mohammadjavad, Kouam, Jules, Songmene, Victor et Mechefske, Chris K..
2020.
« Prediction of cutting tool wear during a turning process using artificial intelligence techniques ».
International Journal of Advanced Manufacturing Technology, vol. 111, nº 1-2.
pp. 505-515.
Olufayo, Oluwole A., Boulaares, Mouhamed Dhafer et Songmene, Victor.
2020.
« Machining/machinability of Rene 65 superalloy for aerospace applications ».
In IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT) (Cape town, South Africa, Jan. 20-22, 2020)
Piscataway, NJ, USA : IEEE.
Sadeghifar, Morteza, Javidikia, Mahshad, Songmene, Victor et Jahazi, Mohammad.
2020.
« Finite element simulation-based predictive regression modeling and optimum solution for grain size in machining of Ti6Al4V alloy: Influence of tool geometry and cutting conditions ».
Simulation Modelling Practice and Theory, vol. 104.
Saidi, Mohamed Nejib, Djebara, Abdelhakim, Songmene, Victor et Bahloul, Ali.
2020.
« Experimental evaluation of three local exhaust ventilation systems designed to reduce ultrafine dust emission during a polishing process ».
Aerosol Science and Engineering, vol. 4, nº 1.
pp. 9-17.
Shnfir, Mohamed, Kouam, J. et Songmene, V..
2020.
« Ultrafine particle emission during high-speed milling of hardened AISI 1045 steel ».
International Journal of Advanced Manufacturing Technology, vol. 110, nº 3-4.
pp. 617-627.
Songmene, V. et Olufayo, O. A..
2020.
« Advances in fine and ultrafine particles emission and dispersion in machining: Cases of metals and granite ».
In Proceedings of 2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT) (Cape town, South Africa, Jan. 20-22, 2020)
pp. 36-45.
IEEE.
Tran, Dinh Son, Songmene, Victor, Ngo, Anh Dung et Kouam, Jules.
2020.
« Effects of reinforcements and cutting parameters on machinability of polypropylene-based biocomposite reinforced with biocarbon particles and chopped miscanthus fibers ».
International Journal of Advanced Manufacturing Technology, vol. 110, nº 11-12.
pp. 3423-3444.
Tran, Dinh Son, Songmene, Victor, Ngo, Anh Dung, Kouam, Jules, Rodriguez-Uribe, Arturo, Misra, Manjusri et Mohanty, Amar Kumar.
2020.
« Experimental investigation on machinability of polypropylene reinforced with miscanthus fibers and biochar ».
Materials, vol. 13, nº 5.
Yeganefar, Ali, Niknam, Seyed Ali et Songmene, Victor.
2020.
« Machinability study of aircraft series aluminium alloys 7075-T6 and 7050-T7451 ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 44, nº 3.
pp. 427-439. 2019
Ajaja, J., Jomaa, W., Bocher, P., Chromik, R. R., Songmene, V. et Brochu, M..
2019.
« Hard turning multi-performance optimization for improving the surface integrity of 300M ultra-high strength steel ».
International Journal of Advanced Manufacturing Technology, vol. 104, nº 1-4.
pp. 141-157.
Bahloul, Ali, Djebara, Abdelhakim, Saidi, Mohamed Nejib, Songmene, Victor, Villalpando, Fernando et Reggio, Marcelo.
2019.
« Computational and experimental analysis of ultrafine particle dispersion during granite polishing ».
Aerosol Science and Engineering, vol. 3, nº 1.
pp. 21-31.
Bahloul, Ali, Jorge Vanterpool, Rafael Francisco, Djebara, Abdelhakim, Songmene, Victor, Said, Mohamed Nejib, Kouam, Jules, Reggio, Marcelo et Villalpando, Fernando.
2019.
« Transformation du granit : Caractérisation et contrôle de la poussière de la silice émise par le polissage ».
Coll. « Rapports scientifiques », vol. R-1054.
Institut de recherche Robert-Sauvé en santé et en sécurité du travail. 99 p.
Javadi, Hamid, Jomaa, Walid, Songmene, Victor, Brochu, Myriam et Bocher, Philippe.
2019.
« Inconel 718 superalloy controlled surface integrity for fatigue applications produced by precision turning ».
International Journal of Precision Engineering and Manufacturing, vol. 20, nº 8.
pp. 1297-1310. Kouamou, F. B., Songmene, V. et Kouam, J.. 2019. « Effect of tool paths on fine & ultrafine particles emission & distribution during polishing of medium silica content granite ». Communication lors de la conférence : The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019).
Kouedeu, Annie Francie, Kenné, Jean-Pierre et Songmene, Victor.
2019.
« Optimal production planning of hybrid manufacturing/remanufacturing systems under deteriorations ».
In Proceedings of the 9th International Conference on Industrial Engineering and Operations Management (IEOM) (Bangkok, Thailand, March 05-07, 2019)
pp. 1382-1390.
IEOM Society.
Niknam, Seyed Ali, Saberi, Masoud, Kouam, Jules, Hashemi, Ramin, Songmene, Victor et Balazinski, Marek.
2019.
« Ultrafine and fine particle emission in turning titanium metal matrix composite (Ti-MMC) ».
Journal of Central South University, vol. 26, nº 6.
pp. 1563-1572.
Niknam, Seyed Ali, Tiabi, Azziz et Songmene, Victor.
2019.
« Burr edge occupancy: edge finishing index for milling machined parts ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 43, nº 2.
pp. 248-255. Olufayo, Oluwole A., Chaieb, Oussama, Songmene, Victor et Jahazi, Mohammad. 2019. « Machining studies on high silicon content Al-Si alloys for the aerospace industry ». Communication lors de la conférence : The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019).
Olufayo, Oluwole A., Che, Hanqing, Songmene, Victor, Katsari, Christina et Yue, Stephen.
2019.
« Machinability of Rene 65 superalloy ».
Materials, vol. 12, nº 12.
Olufayo, Oluwole A., Elfasi, Osamaand et Songmene, Victor.
2019.
« Machinability studies of ferritic, austenitic and martensitic stainless steels ».
In Proceedings of The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019)
Western University - Department of Mechanical and Materials Engineering.
Saidi, M. N., Songmene, V., Kouam, J. et Bahloul, A..
2019.
« Study of surface quality and dust particles emission and dispersion during dry polishing of granite ».
International Journal of Advanced Manufacturing Technology, vol. 104.
pp. 4675-4684.
Shnfir, Mohamed, Olufayo, Oluwole A., Jomaa, Walid et Songmene, Victor.
2019.
« Machinability study of hardened 1045 steel when milling with ceramic cutting inserts ».
Materials, vol. 12, nº 23.
Songmene, Victor. 2019. « Comité R&D aluminium : Enjeux pour l'usinage ». Communication lors de la conférence : Séminaire, CMQ, Organisé par Alu-Québec en collaboration avec CeAL (Trois-Rivières, QC, Canada, 31 janv. 2019). Songmene, Victor. 2019. « Progress on fine and ultrafine particles emission, dispersion & control during machining : cases of metals, composite, woods and granite ». Communication lors de la conférence : 5th Edition of International Conference on Occupational Health and Public Safety (Berlin, Germany, Apr. 23-24, 2019). Songmene, Victor. 2019. « Usinage 4.0 : optimisation des performances d'usinage ». Communication lors de la conférence : Séminaire Usinage 4.0, CTA Saint-Hubert, organisé par Réseau-TransA1 en collaboration avec Alu-Québec, CeAl et CRITM (Saint-Hubert, QC, Canada, 01 oct. 2019). 2018
Bouzid, A., Songmene, V. et Kenné, J. P..
2018.
« Bavures d'usinage et ébavurage : Méthode de sélection des procédés et allocation optimale des machines ».
In 7th International Metrology Conference – CAFMET 2018 (Marrakech, Maroc, Apr. 09-12, 2018)
pp. 294-300.
Comite Africain de Metrologie.
Djebara, Abdelhakim, Songmene, Victor et Bahloul, Ali.
2018.
« Performance of a capillary dilution system for high concentration sampling of ultrafine aerosols ».
Aerosol Science and Engineering, vol. 2, nº 2.
92–97.
Kibouka, Guy Richard, Nganga-Kouya, Donatien, Kenné, Jean-Pierre, Polotski, Vladimir et Songmene, Victor.
2018.
« Maintenance and setup planning in manufacturing systems under uncertainties ».
Journal of Quality in Maintenance Engineering, vol. 24, nº 2.
pp. 170-184.
Marani, Mohsen, Songmene, Victor, Kouam, Jules et Zedan, Yasser.
2018.
« Experimental investigation on microstructure, mechanical properties and dust emission when milling Al-20Mg 2Si-2Cu metal matrix composite with modifier elements ».
International Journal of Advanced Manufacturing Technology, vol. 99, nº 1-4.
pp. 789-802.
Marani, Mohsen, Songmene, Victor, Kouam, Jules et Zedan, Yasser.
2018.
« Valuation of the effect of barium on surface roughness and ultrafine particle emission while dry milling Al-20Mg2Si metal matrix composite ».
In 2018 6th International Conference on Mechanical, Automotive and Materials Engineering (CMAME) (Hong Kong, China, Aug. 10-12, 2018)
Piscataway, NJ, USA : IEEE. Marani-Barzani, Mohsen et Songmene, Victor. 2018. « Machinability and mechanical properties of Al-Mg2Si in-situ composite with bismuth or barium ». Affiche présentée lors de la conférence : REGAL student's day).
Niknam, Seyed Ali, Davoodi, Behnam, Davim, J. Paulo et Songmene, Victor.
2018.
« Mechanical deburring and edge-finishing processes for aluminum partsa review ».
International Journal of Advanced Manufacturing Technology, vol. 95, nº 1-4.
pp. 1101-1125.
Niknam, Seyed Ali, Kouam, Jules, Songmene, Victor et Balazinski, Marek.
2018.
« Dry and semi-dry turning of titanium metal matrix composites (Ti-MMCs) ».
In 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest , Hungary, June 25-27, 2018)
Coll. « Procedia CIRP », vol. 77.
pp. 62-65.
Elsevier.
Pantoja, Francisco G., Songmene, Victor, Kenné, Jean-Pierre, Olufayo, Oluwole A. et Ayomoh, Michael.
2018.
« Development of a tool cost optimization model for stochastic demand of machined products ».
Applied Mathematics, vol. 9, nº 12.
pp. 1395-1423.
Sadeghifar, Morteza, Sedaghati, Ramin, Jomaa, Walid et Songmene, Victor.
2018.
« A comprehensive review of finite element modeling of orthogonal machining process: chip formation and surface integrity predictions ».
International Journal of Advanced Manufacturing Technology, vol. 96, nº 9-12.
pp. 3747-3791.
Sadeghifar, Morteza, Sedaghati, Ramin, Jomaa, Walid et Songmene, Victor.
2018.
« Finite element analysis and response surface method for robust multi-performance optimization of radial turning of hard 300M steel ».
International Journal of Advanced Manufacturing Technology, vol. 94, nº 5-8.
pp. 2457-2474.
Saidi, M. N., Songmene, V., Kouam, J. et Bahloul, A..
2018.
« Rotational and translation-free polishing of granite: surface quality and dust particles emission and dispersion ».
International Journal of Advanced Manufacturing Technology, vol. 98, nº 1-4.
pp. 289-303.
Songmene, V., Kouam, J. et Balhoul, A..
2018.
« Effect of minimum quantity lubrication (MQL) on fine and ultrafine particle emission and distribution during polishing of granite ».
Measurement: Journal of the International Measurement Confederation, vol. 114.
pp. 398-408.
Songmene, V., Miazza, A., Kouam, J. et Olufayo, O.A..
2018.
« Machining granite materials: effects of polishing conditions on part quality, fine and ultrafine particles emission ».
In 7th International Metrology Conference – CAFMET 2018 (Marrakech, Maroc, Apr. 09-12, 2018)
pp. 37-46.
Comite Africain de Metrologie. Songmene, Victor. 2018. « Effect of machining & lubricating conditions on dust emission during granite polishing ». Communication lors de la conférence : 4th International Conference on Occupational Health and Safety, EuroSciCon (London, UK, May 28-29, 2018).
Songmene, Victor, Miazza, Alban, Hechmi, Mohamed Amine, Olufayo, Oluwole Ayodeji et Kouam, Jules.
2018.
« Granite polishing: Effects of polishing parameters and tool paths on part quality and dust emission ».
In 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest , Hungary, June 25-27, 2018)
Coll. « Procedia CIRP », vol. 77.
pp. 139-142.
Elsevier.
Songmene, Victor, Zaghbani, Imed et Kientzy, Guillaume.
2018.
« Machining and machinability of tool steels: Effects of lubrication and machining conditions on tool wear and tool life data ».
In 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest, Hungary, June 25-27, 2018)
Coll. « Procedia CIRP », vol. 77.
pp. 505-508.
Elsevier. 2017
Barzani, Mohsen Marani, Farahany, Saeed et Songmene, Victor.
2017.
« Machinability characteristics, thermal and mechanical properties of Al-Mg2Si in-situ composite with bismuth ».
Measurement, vol. 110.
pp. 263-274.
Elgnemi, Tarek, Ahmadi, Keivan, Songmene, Victor, Nam, Jungsoo et Jun, Martin B. G..
2017.
« Effects of atomization-based cutting fluid sprays in milling of carbon fiber reinforced polymer composite ».
Journal of Manufacturing Processes, vol. 30.
pp. 133-140.
Jomaa, Walid, Mechri, Oussama, Levesque, Julie, Songmene, Victor, Bocher, Philippe et Gakwaya, Augustin.
2017.
« Finite element simulation and analysis of serrated chip formation during highspeed machining of AA7075T651 alloy ».
Journal of Manufacturing Processes, vol. 26.
pp. 446-458.
Jomaa, Walid, Songmene, Victor et Bocher, Philippe.
2017.
« Predictive analytical modeling of cutting forces generated by high-speed machining of ductile and hard metals ».
Machining Science and Technology, vol. 21, nº 3.
pp. 335-361.
Jomaa, Walid, Songmene, Victor, Bocher, Philippe et Gakwaya, Augustin.
2017.
« Fea-based comparative investigation on high speed machining of aluminum alloys aa6061-t6 and aa7075-t651 ».
In 9th International Congress on Precision Machining, (ICPM 2017) (Athens, Greece, Sept. 06-09, 2017)
Coll. « Solid State Phenomena », vol. 261.
pp. 347-353.
Kemi Yotat, Frank Éric, Kenné, Jean-Pierre et Songmene, Victor.
2017.
« Optimal stochastic control of an aluminium recycling unit in reverse logistics ».
In 29th European Modeling and Simulation Symposium (EMSS 2017) Held at the International Multidisciplinary Modeling and Simulation Multiconference (I3M 2017) (Barcelona, Spain, Sept. 18-20, 2017)
pp. 385-390.
CAL-TEK S.r.l..
Khettabi, Riad, Nouioua, Mourad, Djebara, Abdelhakim et Songmene, Victor.
2017.
« Effect of MQL and dry processes on the particle emission and part quality during milling of aluminum alloys ».
International Journal of Advanced Manufacturing Technology, vol. 92, nº 5/8.
pp. 2593-2598.
Marani, Mohsen, Songmene, Victor et Maher, Ibrahem.
2017.
« Investigation on surface finish and tool condition while turning AL20 Mg2Si metal matrix composite ».
In Proceedings of The IRES International Conference (Teheran, Iran, June 12-13, 2017)
The Institute of Research Engineers and Scientists International Conference.
Marani, Mohsen, Songmene, Victor et Maher, Ibrahem.
2017.
« Investigation on surface finish and tool condition while turning AL20Mg2Si metal matrix composite ».
International Journal of Advances in Science, Engineering and Technology, vol. 5, nº 3, Supp. 1.
pp. 11-14.
Niknam, Seyed Ali, Balazinski, Marek et Songmene, Victor.
2017.
« To characterize and optimize the surface quality attributes in slot milling operation ».
International Journal of Advanced Manufacturing Technology, vol. 93, nº 1-4.
pp. 727-746.
Niknam, Seyed Ali et Songmene, Victor.
2017.
« Burr formation and correlation with cutting force and acoustic emission signals ».
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 231, nº 3.
pp. 399-414. 2016
Jomaa, W., Mechri, J., Lévesque, J., Gakwaya, A., Songmene, V. et Bocher, P..
2016.
« Finite element analysis of serrated chip formation in machining of 7075-T651 alluminum alloy ».
In XXVIII International Mineral Processing Congress (IMPC) (Québec, QC, Canada, Sept. 11-15, 2016)
Jomaa, W., Songmene, V. et Bocher, P..
2016.
« An investigation of machining-induced residual stresses and microstructure of induction-hardened AISI 4340 steel ».
Materials and Manufacturing Processes, vol. 31, nº 7.
pp. 838-844.
Jomaa, Walid, Songmene, Victor et Bocher, Philippe.
2016.
« An hybrid approach based on machining and dynamic tests data for the identification of material constitutive equations ».
Journal of Materials Engineering and Performance, vol. 25, nº 3.
pp. 1010-1027.
Kibouka, Guy-Richard, Nganga-Kouya, Donatien, Kenne, Jean-Pierre, Songmene, Victor et Polotski, Vladimir.
2016.
« Production planning of a failure-prone manufacturing system under different setup scenarios ».
Journal of Applied Mathematics, vol. 2016.
Kouedeu, A. F., Kenné, J-P. et Songmene, V..
2016.
« Hybrid control of processing/reprocessing rates for a deteriorated manufacturing system ».
In 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016)
MOSIM.
Mandatsy Moungomo, J. B., Nganga-Kouya, D., Songmene, V., Kouam, J. et Kenné, J. P..
2016.
« Machinability study of recycled aluminum cans and machining chips ».
International Journal of Advanced Manufacturing Technology, vol. 87, nº 9.
pp. 2551-2566.
Mandatsy Moungomo, Jean Brice, Kouya, Donatien Nganga et Songmene, Victor.
2016.
« Aluminium machining chips formation, treatment recycling: A review ».
In 13th International Aluminium Conference (INALCO 2016) (Naples, Italy, Sept. 21-23, 2016)
Coll. « Key Engineering Materials », vol. 710.
pp. 71-76.
Trans Tech Publications Ltd.
Mandatsy Moungomo, Jean Brice, Kouya, Donatien Nganga et Songmene, Victor.
2016.
« Turning and drilling machinability of recycled aluminum alloys ».
In 13th International Aluminium Conference (INALCO) (Naples, Italy, Sept. 21-23, 2016)
Coll. « Key Engineering Materials », vol. 710.
pp. 77-82.
Trans Tech Publications Ltd.
Niknam, Seyed Ali, Kouam, Jules et Songmene, Victor.
2016.
« Experimental investigation on part quality and metallic particle emission when milling 6061-T6 aluminium alloy ».
International Journal of Machining and Machinability of Materials, vol. 18, nº 1-2.
pp. 120-137.
Zoghlami, Mariem, Jahazi, Mohammad et Songmene, Victor.
2016.
« The effects of friction stir welding parameters on the characteristics of banded structure for aluminum alloys ».
In 13th International Aluminium Conference (INALCO) (Naples, Italy, Sept. 21-23, 2016)
Coll. « Key Engineering Materials », vol. 710.
pp. 155-159.
Trans Tech Publications Ltd. 2015
Bahloul, A., Djebara, A., Saidi, M. N. et Songmene, V..
2015.
« Simulating grinding dust dispersion and assessment of the efficiency of local capture ventilation ».
In Proceedings of the 11th International Conference on Industrial Ventilation (Ventilation 2015) (Shanghai, China, Oct. 26-28, 2015)
pp. 598-605.
International Conference on Industrial Ventilation. Belhadj, T., Songmene, V. et Jahazi, M.. 2015. « Influence des paramètres de procédé sur la distorsion de grandes plaques d'aluminium formées par thermoformage : phase d'éjection ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (Chicoutimi, QC, Canada, 11 nov. 2015). Carrier, Mathieu, Dansereau, Mathieu, Fernandes, Julio, Mérette, Jean-Sébastien, Petit, Yvan et Songmene, Victor (inventeurs) 12 mai 2015. « Alésoir acétabulaire ». Valorisation recherche hôpital Sacré-Coeur de Montréal, École de technologie supérieure (titulaire(s)). Brevet canadien CA 2696990. [Titre traduit: Acetabular reamer with locking collar].
Francie, Kouedeu Annie, Jean-Pierre, Kenne, Pierre, Dejax, Victor, Songmene et Vladimir, Polotski.
2015.
« Stochastic models and numerical solutions for manufacturing/remanufacturing systems with applications to the printer cartridge industry ».
Journal of Manufacturing Systems, vol. 37, nº Part 3.
pp. 662-671.
Kouam, Jules, Songmene, Victor, Balazinski, Marek et Hendrick, Patrick.
2015.
« Effects of minimum quantity lubricating (MQL) conditions on machining of 7075-T6 aluminum alloy ».
International Journal of Advanced Manufacturing Technology, vol. 79, nº 5.
pp. 1325-1334.
Kouedeu, A. F., Kenné, J.-P., Dejax, P., Songmene, V. et Polotski, V..
2015.
« Production and maintenance planning for a failure-prone deteriorating manufacturing system: a hierarchical control approach ».
International Journal of Advanced Manufacturing Technology, vol. 76, nº 9.
pp. 1607-1619.
Niknam, Seyed Ali et Songmene, Victor.
2015.
« Milling burr formation, modeling and control: A review ».
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 229, nº 6.
pp. 893-909.
Saidi, M. N., Songmene, Victor, Kouam, J. et Bahloul, A..
2015.
« Experimental investigation on fine particle emission during granite polishing process ».
International Journal of Advanced Manufacturing Technology, vol. 81, nº 9.
pp. 2109-2121.
Songmene, Victor, Khettabi, Riad, Viens, Martin, Kouam, Jules, Hallé, Stéphane, Morency, François, Masounave, Jacques et Djebara, Abdelhakim.
2015.
« Nanoparticle measurement, control and characterization: procedure applied to machining and mechanical friction ».
Coll. « Studies and Research Projects », vol. R-864.
IRSST. 82 p.
Songmene, Victor et Njoya Doko, R..
2015.
« Fine metallic particle emission when milling aluminium alloys and aluminium metal matrix composites ».
In 7th Light Metals Technology Conference (LMT2015) (Port Elizabeth, South Africa, July 27-29, 2015)
Coll. « Materials Science Forum », vol. 828-829.
pp. 381-388.
Switzerland : Trans Tech Publications. 2014
Daoud, M., Jomaa, W., Chatelain, Jean-François, Bouzid, Abdel-Hakim et Songmene, Victor.
2014.
« Identification of material constitutive law constants using machining tests: A response surface methodology based approach ».
In 2014 International Conference on High Performance and Optimum Design of Structures and Materials, HPSM 2014 which incorporated the Seminar on Optimum Design in Engineering, OPTI 2014 (Ostend, Belgium, June 9-11, 2014)
Coll. « WIT Transactions on the Built Environment »
pp. 25-36.
WITPress.
Djebara, Abdelhakim, Bahloul, Ali, Ntcheping, Bernard Wenga et Songmene, Victor.
2014.
« Dilution method to characterize fine and ultrafine particle at high concentrations ».
In Conference Proceedings : 1st International Conference on Atmospheric Dust : DUST 2014 (Castellaneta Marina, Italy, June 1-6, 2014)
Coll. « ProScience », vol. 1.
pp. 312-317.
Digilabs Publishing.
Djebara, Abdelhakim, Bahloul, Ali et Songmene, Victor.
2014.
« Technique de dilution des concentrations de la poussière émise lors de la transformation des matériaux ».
In 36e Congrès de l'AQHSST :Bien s'outiller pour intervenir: se développer, se spécialiser, se renouveler : Congrès de l'Association québécoise pour l’hygiène, la santé et la sécurité du travail (Beaupré, QC, Canada, 7-9 mai 2014)
Association québécoise pour l’hygiène, la santé et la sécurité du travail.
Jomaa, W., Songmene, Victor et Bocher, Philippe.
2014.
« Surface finish and residual stresses induced by orthogonal dry machining of AA7075-T651 ».
Materials, vol. 7, nº 3.
pp. 1603-1624.
Jomaa, Walid, Daoud, Monzer, Songmene, Victor, Bocher, Philippe et Châtelain, Jean-François.
2014.
« Identification and validation of Marusich's constitutive law for finite element modeling of high speed machining ».
In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014)
American Society of Mechanical Engineers (ASME). Jomaa, Walid, Songmene, Victor et Bocher, Philippe. 2014. « Material behavior modeling during high speed machining of 6061-T6 and 7075-T651 alloys ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (JER2014) (Sherbrooke, QC, Canada, Nov. 18, 2014).
Kamguem, R., Tahan, S.-Antoine et Songmene, Victor.
2014.
« Surface roughness estimation of turned parts from optical image measurements and wavelet decomposition ».
International Journal of Materials Forming and Machining Processes, vol. 1, nº 1.
pp. 48-72.
Kouam, Jules, Djebara, Abdelhakim et Songmene, Victor.
2014.
« Experimental investigation on the effect of pre-holes on drilling process performance of aluminum alloys: forces, surface finish and dust emission ».
Advances in Materials Science and Applications, vol. 3, nº 1.
pp. 13-23. Kouedeu, A. F., Kenné, J. P., Dejax, P., Songmene, V. et Polostki, V.. 2014. « Stochastic models and numerical solutions for manufacturing/remanufacturing systems with applications to the printer cartridge industry ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (JER2014) (Sherbrooke, QC, Canada, Nov. 18, 2014).
Kouedeu, Annie Francie, Kenné, Jean-Pierre, Dejax, Pierre, Songmene, Victor et Polotski, Vladimir.
2014.
« Production planning of a failure-prone manufacturing/remanufacturing system with production-dependent failure rates ».
Applied Mathematics, vol. 5, nº 10.
pp. 1557-1572.
Kouedeu, Annie Francie, Kenné, Jean-Pierre, Dejax, Pierre, Songmene, Victor et Polotski, Vladimir.
2014.
« Stochastic optimal control of manufacturing systems under production-dependent failure rates ».
International Journal of Production Economics, vol. 150.
pp. 174-187.
Niknam, S. A. et Songmene, Victor.
2014.
« Analysis of friction and burr formation in slot milling ».
In 47th CIRP Conference on Manufacturing Systems, CMS 2014 (Windsor, Canada, Apr. 28-30, 2014)
Coll. « Procedia CIRP », vol. 17.
pp. 755-759.
Elsevier.
Niknam, S. A. et Songmene, Victor.
2014.
« Analytical modelling of slot milling exit burr size ».
International Journal of Advanced Manufacturing Technology, vol. 73, nº 1-4.
pp. 421-432.
Niknam, Seyed A., Wygowski, Walery, Balazinksi, Marek et Songmene, Victor.
2014.
« Milling burr formation and avoidance ».
In
Machinability of Advanced Materials.
pp. 57-93. John Wiley & Sons, Inc..
Niknam, Seyed Ali, Khettabi, Raid et Songmene, Victor.
2014.
« Machinability and machining of titanium alloys: a review ».
In
Machining of Titanium Alloys.
Coll. « Materials Forming, Machining and Tribology ».
pp. 1-30. Springer-Verlag Berlin Heidelberg.
Niknam, Seyed Ali, Zedan, Yasser et Songmene, Victor.
2014.
« Machining burrs formation & deburring of aluminium alloys ».
In
Light metal alloys applications.
pp. 99-122. InTech publication. Saidi, Mohamed Nejib, Songmene, Victor et Kouam, Jules. 2014. « Design, fabrication and testing of a polishing tool adaptable to machine-tools ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (JER2014) (Sherbrooke, QC, Canada, Nov. 18, 2014). Songmene, Victor. 2014. « Outillage - optimisation d'usinage ». Communication lors de la conférence : 1re édition de l'évènement Alliance Monde Polymères (Lévis, QC, Canada, 11-12 février 2014).
Songmene, Victor, Khettabi, Riad, Viens, Martin, Kouam, Jules, Hallé, Stéphane, Morency, François, Masounave, Jacques et Djebara, Abdelhakim.
2014.
« Mesure, contrôle et caractérisation des nanoparticules : Procédure appliquée à l'usinage et au frottement mécanique ».
Coll. « Études et recherches », vol. R-814.
Montréal, Québec, Canada : IRSST. 93 p. 2013
Djebara, A., Bahloul, A. et Songmene, V..
2013.
« Émission et dispersion de particules lors de l'usinage à sec d'alliages d'aluminium ».
In Proceedings of the 12th International Aluminum Conference (INALCO) (Montréal, QC, Canada, Oct. 21-23, 2013)
Djebara, A., Jomaa, W., Bahloul, A. et Songmene, V..
2013.
« Dust emission during dry machining of aeronautic aluminum alloys ».
In Proceedings of 1st International Conference on Aeronautics Sciences (ICAS) (Oran, Algeria, May 27-28, 2013)
ICAS.
Djebara, A. et Songmene, Victor.
2013.
« Dry machining of aluminum alloys and air quality ».
In Proceedings of the 37th International MATADOR Conference (Manchester, UK, July 25-27, 2012)
pp. 135-139.
Springer Science and Business Media, LLC.
Djebara, A., Zedan, Y., Kouam, Jules et Songmene, Victor.
2013.
« The effect of the heat treatment on the dust emission during machining of an Al-7Si-Mg cast alloys ».
Journal of Materials Engineering and Performance, vol. 22, nº 12.
pp. 3840-3853.
Djebara, Abdelhakim, Songmene, Victor et Bahloul, Ali.
2013.
« Effects of machining conditions on specific surface of PM2.5 emitted during metal cutting ».
Health, vol. 5, nº 10A2.
pp. 36-43.
Jomaa, W., Songmene, Victor et Bocher, Philippe.
2013.
« On residual stress changes after orthogonal machining of induction hardened AISI 4340 steel ».
In Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013)
pp. 94-103.
Warrendale, PA, USA : Association for Iron and Steel Technology.
Kamguem, R., Djebara, A. et Songmene, Victor.
2013.
« Investigation on surface finish and metallic particle emission during machining of aluminum alloys using response surface methodology and desirability functions ».
International Journal of Advanced Manufacturing Technology, vol. 69, nº 5-8.
pp. 1283-1298.
Kamguem, Rene, Tahan, Souheil Antoine et Songmene, Victor.
2013.
« Evaluation of machined part surface roughness using image texture gradient factor ».
International Journal of Precision Engineering and Manufacturing, vol. 14, nº 2.
pp. 183-190.
Khettabi, R., Fatmi, L., Masounave, Jacques et Songmene, Victor.
2013.
« On the micro and nanoparticle emission during machining of titanium and aluminum alloys ».
CIRP Journal of Manufacturing Science and Technology, vol. 6, nº 3.
pp. 175-180.
Kouam, Jules, Songmene, Victor et Bahloul, Ali.
2013.
« Experimental investigation on PM2.5 particle emission during polishing of granite ».
Health, vol. 5, nº 10A2.
pp. 29-35.
Kouam, Jules, Songmene, Victor, Zedan, Yasser, Djebara, AbdelHakim et Khettabi, Riad.
2013.
« On chip formation during drilling of cast aluminum alloys ».
Machining Science and Technology, vol. 17, nº 2.
pp. 228-245.
Kouedeu, Annie Francie, Kenné, Jean-Pierre, Dejax, Pierre, Songmene, Victor et Polotski, Vladimir.
2013.
« Analytical modelling and control of a hybrid manufacturing/remanufacturing system ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 46, nº 9.
pp. 401-406.
Levasseur, Annie, Ménard, Jérémie, Songmene, Victor, Fernandes, Julio et Petit, Yvan.
2013.
« Quality of reamed surface using serrated blades as compared to a convential acetabular reamer ».
In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (San Diego, CA, USA, Nov. 15-21, 2013)
ASME.
American Society of Mechanical Engineers (ASME).
Nadeau, Sylvie, Bouchard, Michèle, Debia, Maximilien, DeMarcellis-Warin, Nathalie, Hallé, Stéphane, Songmene, Victor, Therrien, Marie-Christine, Wilkinson, Kevin, Ateme-Nguema, Barthelemy, Dufour, Genevieve, Dufresne, André, Fatisson, Julien, Haddad, Sami, Hadioui, Madjid, Kouam, Jules, Morency, François, Tardif, Robert, Viens, Martin, Weichenthal, Scott, Viau, Claude et Camus, Michel.
2013.
« EquiNanos: innovative team for nanoparticle risk management ».
Nanomedicine : Nanotechnology, Biology and Medicine, vol. 9, nº 1.
pp. 22-24.
Niknam, S. A. et Songmene, V..
2013.
« Deburring and edge finishing of aluminum alloys : a review ».
In Proceedings of the 12th International Aluminum conference (INALCO) (Montréal, QC, Canada, Oct. 21-23, 2013)
Niknam, S. A. et Songmene, Victor.
2013.
« Modeling of burr thickness in milling of ductile materials ».
International Journal of Advanced Manufacturing Technology, vol. 66, nº 9-12.
pp. 2029-2039.
Niknam, S. A., Songmene, Victor et Au, Y. H. J..
2013.
« The use of acoustic emission information to distinguish between dry and lubricated rolling element bearings in low-speed rotating machines ».
International Journal of Advanced Manufacturing Technology, vol. 69, nº 9-12.
pp. 2679-2689.
Niknam, Seyed Ali et Songmene, Victor.
2013.
« Experimental investigation and modeling of milling burrs ».
In ASME 2013 International Manufacturing Science and Engineering Conference Collocated with the 41st North American Manufacturing Research Conference (MSEC) (Madison, WI, USA, June 10-14, 2013)
New York, N.Y., USA : American Society of Mechanical Engineers.
Niknam, Seyed Ali et Songmene, Victor.
2013.
« Factors governing burr formation during high-speed slot milling of wrought aluminum alloys ».
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 227, nº 8.
pp. 1165-1179.
Niknam, Seyed Ali et Songmene, Victor.
2013.
« Simultaneous optimization of burrs size and surface finish when milling 6061-T6 aluminium alloy ».
International Journal of Precision Engineering and Manufacturing, vol. 14, nº 8.
pp. 1311-1320.
Niknam, Seyed Ali, Songmene, Victor et Au, Y. H. Joe.
2013.
« Proposing a new acoustic emission parameter for bearing condition monitoring in rotating machines ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 37, nº 4.
pp. 1105-1114. Petit, Yvan, Fernandes, Julio, Mérette, Jean-Sébastien, Dansereau, Mathieu, Songmene, Victor et Carrier, Mathieu (inventeurs) 4 juin 2013. « Acetabular reamer ». Brevet américain US 8,454,609.
Segonds, Stephane, Masounave, Jacques, Songmene, Victor et Bes, Christian.
2013.
« A simple analytical model for burr type prediction in drilling of ductile materials ».
Journal of Materials Processing Technology, vol. 213, nº 6.
pp. 971-977.
Songmene, Victor, Njoya, R. D. et Nkengue, B. T..
2013.
« Machining performance of a graphitic SiC-aluminium matrix composite ».
In Proceedings of the 37th International MATADOR Conference (Manchester, UK, July 25-27, 2012)
pp. 127-130.
Springer Science and Business Media, LLC.
Zaghbani, Imed, Songmene, Victor et Bonev, Ilian.
2013.
« An experimental study on the vibration response of a robotic machining system ».
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 227, nº 6.
pp. 866-880.
Zedan, Y., Songmene, Victor, Khettabi, R., Kouam, J. et Masounave, Jacques.
2013.
« Surface integrity of Al6061-T6 drilled in wet, semi-wet and dry conditions ».
In Proceedings of the 37th International MATADOR Conference (Manchester, UK, July 25-27, 2012)
pp. 131-134.
Springer Science and Business Media, LLC.
Zedan, Yasser, Songmene, Victor, Kouam, Jules et Masounave, Jacques.
2013.
« Effects of lubrication modes on part quality during drilling 6061-T6 aluminium alloy ».
International Journal of Machining and Machinability of Materials, vol. 13, nº 2-3.
pp. 231-252. 2012
Balazinski, M., Songmene, V. et Kishawy, H. A..
2012.
« Analyzing the machinability of metal matrix composites ».
In
Machining Technology for Composite Materials.
Coll. « Composites Science and Engineering ».
pp. 394-411. Woodhead Publishing.
Djebara, A., Songmene, V., Kouam, J. et Khettabi, R..
2012.
« An experimental investigation on dust emission during milling process using statistical analysis ».
International Journal of Advances in Machining and Forming Operations, vol. 4, nº 1.
pp. 15-37.
Jomaa, W., Fredj, N. Ben, Songemene, Victor, Zaghbani, I. et Braham, C..
2012.
« Hybrid machining versus hard turning-investigation on process induced residual stresses ».
In 1st International Conference on Virtual Machining Process Technology (VMPT) (Montréal, Québec, May 28-June 01, 2012)
Kamguem, René, Songmene, Victor, Kenné, Jean-Pierre et Tahan, Souheil Antoine.
2012.
« Vision-based surface roughness inspection of machined aluminium parts ».
International Journal of Machining and Machinability of Materials, vol. 12, nº 3.
pp. 215-235.
Kamguem, René, Tahan, Antoine, Wenga, Bernard et Songmene, Victor.
2012.
« Non-contact Optical inspection of machined parts Surface Roughness ».
In 1st International Conference on Virtual Machining Process Technology (VMPT) (Montréal, Québec, Canada, 28 mai au 1er juin 2012)
Kouam, J., Songmene, V., Balazinski, M. et Hendrick, P..
2012.
« Dry, semi-dry and wet machining of 6061-T6 aluminium alloy ».
In
Aluminium Alloys - New Trends in Fabrication and Applications.
pp. 199-222. Rijeka : InTech.
Kouam, J., Songmene, V., Djebara, A. et Khettabi, R..
2012.
« Effect of friction testing of metals on particle emission ».
Journal of Materials Engineering and Performance, vol. 21, nº 6.
pp. 965-972.
Kouam, Jules, Zaghbani, Imed, Songmene, Victor, Parson, Nick et Maltais, Alexandre.
2012.
« Factors affecting the machinability of Al-Mg-Si extrusions ».
In Proceedings of the 10th International Aluminum Extrusion Technology Conference (ET '12) (Miami, FL, USA, May 15-18, 2012)
Extrusion Technology for Aluminum Profiles Foundation.
Kouedeu, Annie Francie, Kenné, Jean-Pierre, Dejax, Pierre et Songmene, Victor.
2012.
« A stochastic model for controlling the deterioration of a two machines production system: Extensions to remanufacturing ».
In 25th European Conference on Operational Research (EURO 2012) (Vilnius, Lituanie, July 08-11, 2012)
Kouedeu, Annie Francie, Kenné, Jean-Pierre, Dejax, Pierre et Songmene, Victor.
2012.
« The study of a deteriorating manufacturing system using simulation and response methodology ».
In 24th European Modeling and Simulation Symposium, EMSS 2012 (Vienna, Austria, Sept. 19-21, 2012)
pp. 80-89.
Italy : DIPTEM.
Kouedeu, Annie Francie, Kenné, Jean-Pierre, Delax, Pierre et Songmene, Victor.
2012.
« Production planning of a two-machine manufacturing system with production dependent failure rates ».
In International Conference on Information Systems, Logistics and Supply Chain (ILS) (Québec, QC, Canada, Aug. 26-29, 2012)
Niknam, Seyed Ali, Kamguem, Rene et Songmene, Victor.
2012.
« Analysis and optimization of exit burr size and surface roughness in milling using desirability function ».
In ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012 (Houston, TX, USA, Nov. 9-15, 2012)
pp. 1797-1806.
New York, N.Y., USA : American Society of Mechanical Engineers.
Niknam, Seyed Ali et Songmene, Victor.
2012.
« Statistical investigation on burrs thickness during milling of 6061-T6 aluminium alloy ».
In 1st International Conference on Virtual Machining Process Technology (Montréal, QC, Canada, 28 May-01 June, 2012)
Niknam, Seyed Ali, Zedan, Yasser et Songmene, Victor.
2012.
« Burr formation during milling of wrought aluminum alloys ».
In 20th Annual Conference of Mechanical Engineering (ISME) (Shiraz, Iran, May 15-17, 2012)
Songmene, V., Kouam, J., Zaghbani, I., Parson, N. et Maltais, A..
2012.
« Global machinability of Al-Mg-Si extrusions ».
In
Aluminium Alloys - New Trends in Fabrication and Applications.
pp. 223-251. Rijeka : InTech.
Songmene, Victor, Khettabi, Riad et Kouam, Jules.
2012.
« Dry high-speed machining: A cost effective and green process ».
International Journal of Manufacturing Research, vol. 7, nº 3.
pp. 229-256.
Wenga Ntcheping, B., Kamguem, R., Kouam, J. et Songmene, V..
2012.
« Numerical study and simulation in COMSOL multiphysics of the dilution process during Dust's sampling in dry machining ».
In COMSOL Conference 2012 (Boston, MA, USA, Oct. 03-05, 2012)
COMSOL. Wenga, B., Djebara, A., Kamguem, R., Kouam, J. et Songmene, V.. 2012. « Diluteur approprié pour la mesure des concentrations élevées en poussières fines et ultrafines au cours de l'usinage à sec ». Affiche présentée lors de la conférence : 17e Colloque international en évaluation environnementale (Montréal, QC, Canada, 12-15 juin 2012).
Zaghbani, Imed, Chatelain, Jean-Fraçois, Songmene, Victor, Bérubé, Sébastien et Atarsia, Abdelatif.
2012.
« A comprehensive analysis of cutting forces during routing of multilayer carbon fiber-reinforced polymer laminates ».
Journal of Composite Materials, vol. 46, nº 16.
pp. 1955-1971.
Zaghbani, Imed, Chatelain, Jean-François, Bérubé, Sébastien, Songmene, Victor et Lance, Justin.
2012.
« Analysis and modelling of cutting forces during the trimming of unidirectional CFRP composite laminates ».
International Journal of Machining and Machinability of Materials, vol. 12, nº 4.
pp. 337-357.
Zaghbani, Imed, Jomaa, Walid, Songmene, Victor, L. Boire, Louis-Philippe et Lehuy, Hoang.
2012.
« Investigation on tool wear during dry and wet machining of hardened mould steels ».
International journal of civil engineering and building materials, vol. 2, nº 3.
pp. 124-131.
Zedan, Y., Djebara, A., Songmene, Victor et Niknam, S. A..
2012.
« Burr size minimization when drilling 6061-t6 aluminum alloy ».
In ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012 (Houston, TX, USA, Nov. 9-15, 2012)
pp. 1053-1059.
New York, N.Y., USA : American Society of Mechanical Engineers.
Zedan, Yasser, Khettabi, Riad, Zaghbani, Imed, Kouam, Jules, Masounave, Jacques et Songmene, Victor.
2012.
« Experimental investigation of cutting fluid influence on drilled aluminum part quality ».
International journal of civil engineering and building materials, vol. 2, nº 2.
pp. 78-84. 2011
Djebara, A., Khettabi, R., Kouam, J. et Songmene, Victor.
2011.
« Characterization of fine and ultrafine particles produced during dry machnining of aluminum alloys ».
In Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 03-05, 2011)
pp. 157-170.
Westmount : MetSoc.
Djebara, Abdelhakim, Khettabi, Riad, Kouam, Jules et Songmene, Victor.
2011.
« Comparison of the capability of peak function in describing real condensation particle counter profiles ».
In 2nd International Conference on Laser and Plasma Applications in Materials Science, (LAPAMS) (Algiers, Algeria, Nov. 27-30, 2010)
Coll. « Advanced Materials Research », vol. 227.
pp. 96-100.
Clausthal-Zellerfeld, Germany : Trans Tech Publications.
Jomaa, W., Ben Fredj, N., Zaghbani, I. et Songmene, V..
2011.
« Non-conventional turning of hardened AISI D2 tool steel ».
International Journal of Advances in Machining and Forming Operations, vol. 3, nº 2.
pp. 93-126.
Kamguem, René, Songmene, Victor, Kenné, Jean-Pierre et Tahan, Antoine.
2011.
« Surface quality of 7075-T6 aluminum alloy machined using high-speed milling process ».
In Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, Canada, Oct. 2-5, 2011)
pp. 495-508.
Westmount : MetSoc.
Khettabi, Riad, Zaghbani, Imed, Djebara, Abdelhakim, Kouam, Jules et Songmene, Victor.
2011.
« A new sustainability model for machining processes ».
International Journal of Business Continuity and Risk Management, vol. 2, nº 3.
pp. 187-202.
Khettabi, Riad, Zedan, Yasser, Masounave, Jacques et Songmene, Victor.
2011.
« On particle emission during machining of titanium and aluminum alloys ».
In Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 03-05, 2011)
pp. 475-486.
Westmount : MetSoc.
Kouam, Jules, Zedan, Yasser, Djebara, Abdelhakim, Masounave, Jacques et Songmene, Victor.
2011.
« Machinability of A356 and A319 aluminum alloy ».
In Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 02-05, 2011)
pp. 281-292.
Westmount : MetSoc.
Kouedeu, Annie Francie, Kenné, Jean-Pierre et Songmene, Victor.
2011.
« Production, preventive and corrective maintenance planning in manufacturing systems under imperfect repairs ».
In 3rd International Workshop on Dependable Control of Discrete Systems (DCDS) (Saarbrucken, Germany, June 15-17, 2011)
pp. 59-64.
IEEE.
Lamraoui, M., Thomas, Marc, El Badaoui, M., Zaghbani, I. et Songmene, Victor.
2011.
« New indicators based on cyclostationarity approach for machining monitoring ».
In International Conference Surveillance 6 (Compiègne, France, Oct. 25-26, 2011)
p. 27.
Lamraoui, Mourad, Thomas, Marc, El Badaoui, Mohamed, Zaghbani, Imed et Songmene, Victor.
2011.
« The angular kurtosis and power : new tools for machining monitoring ».
In DINAME : The 14th International Symposium on Dynamic Problems of Mechanics (Sao Paulo, Brazil, Mar. 13-18, 2011)
pp. 494-511.
Sao Sebastiao : ABCM.
Niknam, Seyed Ali, Tiabi, Azziz, Zaghbani, Imed, Kamguem, Rene et Songmene, Victor.
2011.
« Milling burr size estimation using acoustic emission and cutting forces ».
In ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011 (Denver, CO, United states, Nov. 11-17, 2011)
pp. 901-909.
American Society of Mechanical Engineers.
Songmene, Victor, Khettabi, R., Zaghbani, I., Kouam, J. et Djebara, A..
2011.
« Machining and Machinability of Aluminum Alloys ».
In
Aluminium Alloys, Theory and Applications.
pp. 377-400. Rijeka, Croatia : InTech.
Walid, Jomaa, Zaghbani, Imed, Songmene, Victor, Boire, Louis-Philippe L. et LeHuy, Hoang.
2011.
« Dry and wet machinability of hardened mould steels ».
In Proceedings of the International Conference on Environmental Pollution and Remediation (Ottawa, ON, Canada, Aug. 17-19, 2011)
ASET.
Zaghbani, I., Chatelain, J.-F., Songmene, V., Bérubé, S. et Atarsia, A..
2011.
« Modeling of cutting forces for multilayered CFRP laminates ».
In 26th Annual Technical Conference of the American Society for Composites : 2nd Joint US-Canada Conference on Composites (Montreal, QC, Canada, Sept. 26-28, 2011)
pp. 1224-1233.
DEStech Publications.
Zaghbani, I., Lamraoui, M., Songmene, V., Thomas, M. et El Badaoui, M..
2011.
« Robotic high speed machining of aluminum alloys ».
In High Speed Machining : The 4th International Conference on High Speed Machining (ICHSM’2010) (Guangzhou, Guangdong, China, Oct. 9-10, 2010)
Coll. « Advanced Materials Research », vol. 188.
pp. 584-589.
Trans Tech Publications.
Zedan, Yasser, Khettabi, Riad, Songmene, Victor et Masounave, Jacques.
2011.
« Effect of lubrication and application modes on drilled aluminum part quality ».
In Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, QC, Canada, Oct. 02-05, 2011)
pp. 319-330.
Westmount : MetSoc. 2010
Badri, Béchir, Thomas, Marc, Sassi, Sadok, Zaghbani, Imed et Songmene, Victor.
2010.
« Étude du comportement des roulements dans les rotors tournant à haute vitesse ».
Revue Internationale sur l'Ingénierie des Risques Industriels, vol. 3, nº 1.
Djebara, Abdelhakim, Khettabi, Riad, Kouam, Jules et Songmene, Victor.
2010.
« Experimental investigation on ultrafine particles emission during dry machining using statistical tools ».
In International Conference on Nanotechnology : Fundamentals and Applications (Ottawa, Ont., Canada, Aug. 4-6, 2010)
Djebara, Abdelhakim, Khettabi, Riad, Niknam, Seyed Ali et Songmene, Victor. 2010. « Ultrafine particles sampling during machining of aluminum alloys : application to the nanoparticles metrology ». Communication lors de la conférence : Journée des Étudiants du Centre de Recherche sur l'Aluminium (REGAL) (Laval, Québec, Canada, 26 oct. 2010).
Kamguem, René, Songmene, Victor et Niknam, Seyed Ali.
2010.
« Assessing the influence of acoustic emission parameters on machining processing using statistical analysis ».
In Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C, Canada, June 7-9, 2010)
Khettabi, Riad, Djebara, Abdelhakim et Songmene, Victor.
2010.
« Characterization and control of micro and nanoparticles produced during dry cutting ».
In X th Safety, Health and Environment World Congress (São Paulo, Brazil, July, 25-28, 2010)
Khettabi, Riad, Masounave, Jacques et Songmene, Victor.
2010.
« Influence of machining processes on particles emissions ».
In 49th Annual Conference of Metallurgists (COM) (Vancouver, B.C., Canada, Oct. 3-6, 2010)
Khettabi, Riad et Songmene, Victor. 2010. « Caractérisation et mesure des particules ultrafines émises lors du frottement et des procédés d'usinage ». Communication lors de la conférence : Activité d'animation scientifique de la communauté nanotoxicologie du Réseau de recherche en santé et sécurité du travail du Québec (RRSSTQ) (Montréal, Canada, 18 mars 2010).
Khettabi, Riad, Songmene, Victor et Masounave, Jacques.
2010.
« Effects of speeds, materials, and tool rake angles on metallic particle emission during orthogonal cutting ».
Journal of Materials Engineering and Performance, vol. 19, nº 6.
pp. 767-775.
Khettabi, Riad, Songmene, Victor, Zaghbani, Imed et Masounave, Jacques.
2010.
« Modeling of particle emission during dry orthogonal cutting ».
Journal of Materials Engineering and Performance, vol. 19, nº 6.
pp. 776-789.
Kouam, Jules, Masounave, Jacques, Songmene, Victor et Giraudeau, Alain.
2010.
« Pre-holes effect on cutting forces and particle emission during dry drilling ».
In 49th Annual Conference of Metallurgists (COM) (Vancouver, B.C., Canada, Oct. 3-6, 2010)
Kouam, Jules, Songmene, Victor, Djebara, Abdelhakim et Khettabi, Riad.
2010.
« Metallic particle emission during friction testing of metals ».
In International Conference on Nanotechnology : Fundamentals and Applications (Ottawa, Ont., Canada, Aug. 4-6, 2010)
Niknam, Seyed Ali , Rezaei, Seyed Mehdi et Songmene, Victor.
2010.
« A Review on bearing faults diagnosis using acoustic emission ».
In 6th National Conference on Maintenance (Tehran, Iran, June 8-9, 2010)
Tehran, Iran : Civilica.
Niknam, Seyed Ali , Rezaei, Seyed Mehdi et Songmene, Victor.
2010.
« Sensitivity of acoustic emission to lubrication on bearing surfaces ».
In 6th National Conference on Maintenance (Tehran, Iran, June 8-9, 2010)
Tehran, Iran : Civilica.
Niknam, Seyed Ali , Songmene, Victor et Joe Au, Y.H..
2010.
« Bearing condition monitoring in low rotating speed machine using acoustic emission ».
In Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C, Canada, June 7-9, 2010)
Niknam, Seyed Ali, Kamguem, René, Songmene, Victor et Kenné, Jean-Pierre.
2010.
« Machining factors influence on acoustic emission parameters ».
International Journal of Advances in Machining and Forming Operations, vol. 2, nº 2.
pp. 91-114.
Niknam, Seyed Ali et Songmene, Victor.
2010.
« The influence of bearing operational conditions on acoustic emission parameters ».
In Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C, Canada, June 7-9, 2010)
Rabussier, Boris, Litwin, Jacek, Songmene, Victor et Masounave, Jacques.
2010.
« Effect of temperature and stress on friction of metal matrix composite ».
In 49th Annual Conference of Metallurgists (COM) (Vancouver, BC, Canada, Oct. 3-6, 2010)
Songmene, Victor. 2010. « Automated deburring and part finishing : progress and realisations ». Communication lors de la conférence : CRIAQ : Réunions du comité de recherche (Montréal, Canada, 13 janv. 2010).
Zaghbani, Imed, Songmene, Victor, Kientzy, Guillaume et LeHuy, Hoang.
2010.
« Evaluation of sustainability of mould steels based on machinability data ».
International Journal of Machining and Machinability of Materials, vol. 7, nº 1-2.
pp. 58-81.
Zaghbani, Imed, Songmene, Victor et Tousignant, D..
2010.
« A method for selection of the cutting conditions during robotic machining through the vibration response ».
In Premier Colloque International Innovations en Mécaniques Passives et ACTives pour l’ Analyse et la Conception des Systèmes Mécaniques (IMPACT) = First International Conference Passives and Actives Mechanical Innovations in Analysis and Design of Mechanica (Djerba, Tunisie, 22-24 août 2010)
2009
Badri, Béchir, Thomas, Marc, Sassi, Sadok, Zaghbani, Imed, Songmene, Victor, Lakis, A. A. et Mureithi, N..
2009.
« Instabilité des fraiseuses opérant à haute vitesse, provoquée par l’intéraction des défauts de roulements avec les résonances ».
In Proceedings of the 27th Seminar on Machinery Vibration (Vancouver, BC, Canada, Oct. 28-30, 2009)
Canadian Machinery Vibration Association (CMVA) :
Badri, Béchir, Thomas, Marc, Sassi, Sadok, Zaghbani, Imed, Songmene, Victor, Lakis, A. A. et Mureithi, N..
2009.
« Étude du comportement des roulements dans les rotors tournant à haute vitesse. ».
In 2nd International Conference on Industrial Risk Engineering = 2e Congrès International sur l'Ingénierie des Risques Industriels (CIRI) (Reims, France, 13-15 mai 2009)
Balout, B., Masounave, Jacques et Songmene, Victor.
2009.
« Modeling of eutectic macrosegregation in centrifugal casting of thin walled ZA8 zinc alloy ».
Journal of Materials Processing Technology, vol. 209, nº 18-19.
pp. 5955-5963.
Balout, Bahaa, Songmene, Victor et Masounave, Jacques.
2009.
« Mise en forme par centrifugation d'un composite à matrice d'aluminium gradué : modélisation de la ségrégation des particules pendant le processus de solidification ».
In
Encyclopédie de la recherche sur l'aluminium au Québec.
Éd. 2008.
Chicoutimi : Les Presses de l'aluminium PRAL. Djebara, Abdelhakim et Songmene, Victor. 2009. « Mesure et caractérisation des nanoparticules (Nps) métalliques émises lors de l'usinage ». Affiche présentée lors de la conférence : INNO 09 : La Semaine de l'Innovation (Montréal, Canada, 23-24 avril 2009). Hallé, Stéphane, Kouam, Jules, Songmene, Victor, Morency, François, Viens, Martin, Cloutier, Yves, Masounave, Jacques, Khettabi, Riad et Djebara, Abdelhakim. 2009. « Procédure de mesure et de contrôle des nanoparticules manufacturés ». Communication lors de la conférence : Conférences Scientifiques, Sécurité des Travailleurs et Contrôle des Risques Industriels (Montréal, QC, Canada, 17 sept. 2009). Khettabi, R., Djebara, A., Songméné, V., Viens, M., Hallé, S., Morency, F., Cloutier, Y., Kouam, J. et Masounave, J.. 2009. « Procedure of measuring and controlling manufactured nanoparticles ». Communication lors de la conférence : INNO 2009 : La semaine de l'innovation (Montréal, QC, Canada, 23-24 avr. 2009). Khettabi, Riad, Djebara, Abdelhakim et Songmene, Victor. 2009. « Nano and micro particles emission study during metal cutting ». Affiche présentée lors de la conférence : INNO 09 : La Semaine de l'Innovation (Montréal, Canada, 23-24 avril 2009). Khettabi, Riad, Djebara, Abdelhakim, Songmene, Victor, Viens, Martin, Hallé, Stéphane, Morency, François, Cloutier, Yves, Kouam, Jules et Masounave, Jacques. 2009. « Control and measuring of manufactured nanoparticle ». Affiche présentée lors de la conférence : INNO 09 : La Semaine de l'Innovation (Montréal, Canada, 23-24 avril 2009).
Khettabi, Riad et Songmene, Victor.
2009.
« Particle emission during orthogonal and oblique cutting ».
International Journal of Advances in Machining and Forming Operations, vol. 1, nº 1.
pp. 1-10.
Sghir, K. A., El Badaoui, M., Thomas, Marc, Zaghbani, Imed, Songmene, Victor, Lakis, A. A. et Mureithi, N..
2009.
« Identification aveugle paramétrique basée sur la cyclostationnarité à l’ordre deux de la fonction de transfert à partir des mesures vibratoires ».
In 2nd International Conference on Industrial Risk Engineering = 2e Congrès International sur l'Ingénierie des Risques Industriels (CIRI) (Reims, France, 13-15 mai 2009)
Songmene, Victor. 2009. « Dry machining and its effects on machining costs and shop-floor air quality ». Communication lors de la conférence : Hiroshima Aerospace Seminar (Montreal, QC, Canada, Oct. 7, 2009).
Zaghbani, Imed et Songmene, Victor.
2009.
« A force-temperature model including a constitutive law for Dry High Speed Milling of aluminium alloys ».
Journal of Materials Processing Technology, vol. 209, nº 5.
pp. 2532-2544.
Zaghbani, Imed et Songmene, Victor.
2009.
« Estimation of machine-tool dynamic parameters during machining operation through operational modal analysis ».
International Journal of Machine Tools and Manufacture, vol. 49, nº 12-13.
pp. 947-957.
Zaghbani, Imed, Songmene, Victor et Khettabi, Riad.
2009.
« Fine and ultrafine particle characterization and modeling in high-speed milling of 6061-T6 aluminum alloy ».
Journal of Materials Engineering and Performance, vol. 18, nº 1.
pp. 38-48. 2008
Ateme-Nguema, B., Dao, Thien-My et Songmene, Victor.
2008.
« New approach based on RSM and ants colony system for multi-objective Optimization problem: a case study ».
In 14th International Conference on Industry, Engineering, and Management Systems (IEMS) (Cocoa Beach, FL, USA, Mar. 10-12, 2008)
Balout, Bahaa, Songmene, Victor et Masounave, Jacques.
2008.
« Perçage à sec de l'aluminium et alliages métalliques ».
In 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)
Khettabi, R., Songmene, Victor, Masounave, Jacques et Zaghbani, Imed.
2008.
« Understanding the formation of nano and micro particles during metal cutting ».
International Journal of Systems Signal Control and Engineering Applications, vol. 1, nº 3.
pp. 203-210.
Khettabi, R., Zaghbani, Imed, Songmene, Victor et Masounave, Jacques.
2008.
« Identification et prédiction des fines poussières lors de l'usinage ».
In
Encyclopédie de la recherche sur l’aluminium au Québec.
Éd. 2007.
p. 56. Chicoutimi : Les Presses de l'aluminium PRAL.
Khettabi, Riad, Songmene, Victor et Masounave, Jacques.
2008.
« Influence des angles de coupe sur l'émission de poussières ».
In 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)
Kientzy, G., Zaghbani, Imed et Songmene, Victor.
2008.
« Usinabilité et aspects économiques de l'usinage à sec et de l'usinage lubrifié ».
In
Encyclopédie de la recherche sur l’aluminium au Québec.
Éd. 2007.
p. 54. Chicoutimi : Les Presses de l'aluminium PRAL.
Mbou, E. et Songmene, Victor.
2008.
« Amélioration de la qualité et de la productivité de fraisage par le contrôle des conditions de coupe ».
In
Encyclopédie de la recherche sur l’aluminium au Québec.
Éd. 2007.
p. 55. Chicoutimi : Les Presses de l'aluminium, PRAL.
Songmene, Victor, Balout, B. et Masounave, Jacques.
2008.
« Clean machining : experimental investigation on dust formation : Part II : influence of machining strategies and drill condition ».
International Journal of Environmentally Conscious Design & Manufacturing, vol. 14, nº 1.
pp. 17-33.
Songmene, Victor, Balout, B. et Masounave, Jacques.
2008.
« Clean machining: experimental investigation on dust formation - Part I: influence of machining parameters and chip formation ».
International Journal of Environmentally Conscious Design & Manufacturing , vol. 14, nº 1.
pp. 1-16.
Songmene, Victor, Masounave, Jacques et Khettabi, R..
2008.
« L'émission de poussières pendant l'usinage à sec : une synthèse ».
In 2e Sommet Québec-Aquitaine-Midi-Pyrénées sur l'Usinage Haute Performance : Colloque sur l'Usinage à Sec (Montréal, QC, Canada, 3-5 mars 2008)
Zaghbani, Imed, Khettabi, R. et Songmene, Victor.
2008.
« Base de données environnementales pour les alliages d'aluminium ».
In
Encyclopédie de la recherche sur l’aluminium au Québec.
p. 1. Chicoutimi : Les Presses de l'aluminium PRAL. 2007
Balout, B., Songmene, Victor et Masounave, Jacques.
2007.
« An experimental study of dust generation during dry drilling of pre-cooled and pre-heated workpiece materials ».
Journal of Manufacturing Processes, vol. 9, nº 1.
pp. 23-34.
Etsida Mpiga, Félicia, Dao, Thien-My et Songmene, Victor.
2007.
« The hybrid simulation approach based on RSM and ants colony system for multiobjective optimization problem ».
In Proceedings of the 8th Asia Pacific Industrial Engineering & Management System and Chinese Institute of Industrial Engineers Conference (Kaohsiung, Taïwan, Dec. 9-12, 2007)
APIEM & CIIE.
Khettabi, R., Songmene, Victor et Masounave, Jacques.
2007.
« Effect of tool lead angle and chip formation mode on dust emission in dry cutting ».
Journal of Materials Processing Technology, vol. 194, nº 1-3.
pp. 100-109.
Khettabi, R., Songmene, Victor et Masounave, Jacques.
2007.
« Modeling of fine dust during machining ».
In Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montreal, QC, Canada, Dec. 17-19, 2007)
Montréal : École de technologie supérieure.
Parent, Luc, Songmene, Victor et Kenné, Jean Pierre.
2007.
« A generalised model for optimising an end milling operation ».
Production Planning & Control , vol. 18, nº 4.
pp. 319-337. Songmene, Victor. 2007. « Usinage propre et concurrentiel ». Communication lors de la conférence : Conférence Scientifique sur la Sécurité des Travailleurs et le Contrôle des Risques Industriels (Montréal, QC, Canada, 2007).
Songmene, Victor, Masounave, Jacques et Khettabi, R..
2007.
« Dry machining and its effects on productivity, costs, environment and machine-shop air quality ».
In 1st International Conference on Sustainable Manufacturing (Montreal, QC, Canada, Oct. 17-18, 2007)
pp. 51-60.
Songmene, Victor, Masounave, Jacques et Khettabi, R..
2007.
« Safe, environmentally-friendly and cost effective machining ».
In Safety Health and Environmental World Congress (SHEWC) (Santos, Brazil, July 22-25, 2007)
pp. 44-48.
Zaghbani, Imed, Songmene, Victor et Khettabi, R..
2007.
« A simplified numerical model for orthogonal cutting ».
In 1st International Conference on Sustainable Manufacturing (Montreal, QC, Canada, Oct. 17-18, 2007)
pp. 152-157.
Zaghbani, Imed, Songmene, Victor et Khettabi, R..
2007.
« Modeling of thin wall-parts deflection during high speed milling ».
In 1st International Conference on Sustainable Manufacturing (Montreal, QC, Canada, Oct. 17-18, 2007)
pp. 111-115.
2006
Balout, Bahaa, Songmene, Victor et Masounave, Jacques.
2006.
« Usinabilité d'alliages légers et des composites lors du perçage à sec ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 30, nº 3.
pp. 329-343.
Michaud, J.P., Songmene, Victor et Tahan, Antoine.
2006.
« Aluminium alloy 7050 T7451 thin wall high-speed machining parts study ».
In 3th International Symposium on Aerospace Materials and Manufacturing Processes: Emerging Materials, Manufacturing, and Repair Techniques (Montreal, QC, Canada, Oct. 2-4, 2006)
Canada : The Metallurgy and Materials Society.
Njoya, D.R., Khettabi, R., Songmene, Victor et Masounave, Jacques.
2006.
« Influence des matériaux et des procédés d'usinage sur les émissions de poussières fines ».
In 45th International Conference of Metallurgists (Montréal, QC, Canada, Oct. 1-4, 2006)
Montreal, Canada : Institut canadien des mines. 2004
Brunette, J., Jeu-Herault, M., Songmene, Victor et Masounave, Jacques.
2004.
« Understanding and characterizing the drilling of recycled plastics ».
Machining Science and Technology, vol. 8, nº 1.
pp. 141-170. Tahan, Antoine, Songmene, Victor et Chatelain, Jean-François. 2004. « Case study of the application of statistical tolerances taking account of correlation ». Communication lors de la conférence : International Conference on Computers and Industrial Engineering (San Francisco, CA, USA, Nov., 2004). 2003Amtout, Y., Songmene, Victor et Chatelain, Jean-François. 2003. « Optimisation de trajectoires d'outils en FAO pour l'usinage à haute performance des moules en P20 ». Communication lors de la conférence : 4th International Conference on Industrial Automation (Montreal, QC, Canada, June 9, 2003). Marguerit, L., Balazinski, M. et Songmene, Victor. 2003. « Drilling of MMC : influence of cutting conditions on part roughness and form error ». Communication lors de la conférence : CIRP Workshop (Paris, France, Jan., 2003). 2002
Songmene, Victor, Balout, Bahaa et Masounave, Jacques.
2002.
« Drilling of metal matrix composites : cutting forces and chip formation ».
In International Symposium on Enabling Technologies for Light Metals and Composite Materials and their End-Products (Montreal, QC, Canada, Aug. 11-14, 2002)
pp. 633-651.
Canada : Canadian Institute of Mining, Metallurgy and Petroleum.
Songmene, Victor, Jeu-Herault, M., Côté, M., Duval, M. et Masounave, Jacques.
2002.
« Généralités sur l'aluminium dans les alliages d'aluminium moulés : connaissances et pratiques ».
CQRDA, CTIF. 2000Songmene, Victor. 2000. « Usinage des composites à matrice d'alliage d'aluminium GrA-Ni ». Thèse de doctorat. Montréal, École Polytechnique de Montréal, 200 p. 1994Balazinksi, Marek et Songméné, Victor. 1994. « Fraisage de l'Inconel 600 à avance variable ». Communication lors de la conférence : 62e Congrès de l'ACFAS (Montréal, QC, Canada, 16-20 mai 1994). |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau