| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Document quand le type de document est "Article publié dans une revue, révisé par les pairs" et l'année est 2008Nombre de documents archivés : 245.
Afrin, N., Chen, D. L., Cao, X. et Jahazi, M..
2008.
« Microstructure and tensile properties of friction stir welded AZ31B magnesium alloy ».
Materials Science and Engineering: A, vol. 472, nº 1-2.
pp. 179-186.
Aissaoui, Rachid et Desroches, Guillaume.
2008.
« Stroke pattern classification during manual wheelchair propulsion in the elderly using fuzzy clustering ».
Journal of Biomechanics, vol. 41, nº 11.
pp. 2438-2445.
Al-Kazzaz, H., Medraj, M., Cao, X. et Jahazi, M..
2008.
« Nd:YAG laser welding of aerospace grade ZE41A magnesium alloy: modeling and experimental investigations ».
Materials Chemistry and Physics, vol. 109, nº 1.
pp. 61-76.
Al-Kazzaz, Haider, Cao, Xinjin, Jahazi, Mohammad et Medraj, Mamoun.
2008.
« Reliability of laser welding process for ZE41A-T5 magnesium alloy sand castings ».
Materials Transactions, vol. 49, nº 4.
pp. 774-781.
Amarir, Said et Al Haddad, Kamal.
2008.
« A modeling technique to analyze the impact of inverter supply voltage and cable length on industrial motor-drives ».
IEEE Transactions on Power Electronics, vol. 23, nº 2.
pp. 753-762.
Amarir, Said et Al Haddad, Kamal.
2008.
« A new design tool to protect industrial long-cable PWM ASD systems against high-frequency overvoltage problems ».
Canadian Journal of Electrical and Computer Engineering = Revue Canadienne de Génie Électrique et Informatique, vol. 33, nº 3-4.
pp. 125-132.
Awde, Ali, Bellik, Yacine et Tadj, Chakib.
2008.
« Complexity of mathematical expressions in adaptive multimodal multimedia system ensuring access to mathematics for visually impaired users ».
International Journal of Computer and Information Science and Engineering , vol. 2, nº 2.
pp. 103-115.
Awdé, Ali, Hina, Manolo Dulva, Tadj, Chakib, Bellik, Yacine et Cherif, Ramdane.
2008.
« Middleware for ubiquitous access to mathematical expressions for visually-impaired users ».
Ubiquitous Computing and Communication Journal, vol. 3, nº 5.
pp. 1-14.
Ayari, H., Thomas, Marc et Doré, Sylvie.
2008.
« Development of an injury risk factor for drivers ».
Revue Internationale sur l'Ingénierie des Risques Industriels, vol. 1, nº 2.
pp. 120-138.
Badarneh, Osamah, Kadoch, Michel et Elhakeem, Ahmed.
2008.
« QoS multilayered multicast routing protocol for video transmission in heterogeneous wireless ad hoc networks ».
WSEAS Transactions on Computers, vol. 7, nº 6.
pp. 680-693.
Baudoin, Aurelien, Skalli, W., de Guise, Jacques A. et Mitton, David.
2008.
« Parametric subject-specific model for in vivo 3D reconstruction using bi-planar X-rays: Application to the upper femoral extremity ».
Medical and Biological Engineering and Computing, vol. 46, nº 8.
pp. 799-805.
Beauchamp, B., Lamarche, L. et Kajl, S..
2008.
« A dynamic model of a vertical direct expansion ground heat exchanger ».
Renewable Energy and Power Quality Journal, vol. 1, nº 6.
pp. 545-551.
Beaulieu, M. N. et Botez, Ruxandra M..
2008.
« Simulation and prediction of main rotor, tail rotor, and engine parameters from flight tests ».
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 222, nº 6.
pp. 817-834.
Beauregard, Yvan, Thomson, Vincent et Bhuiyan, Nadia.
2008.
« Lean engineering logistics: load leveling of design jobs with capacity considerations ».
Canadian Aeronautics and Space Journal = Journal Aéronautique et Spatial du Canada, vol. 54, nº 2.
pp. 19-30.
Bel Haj Youssef, Nesrine, Al Haddad, Kamal et Kanaan, Hadi Y..
2008.
« Real-time implementation of a discrete nonlinearity compensating multiloops control technique for a 1.5-kW three-phase/switch/level Vienna converter ».
IEEE Transactions on Industrial Electronics, vol. 55, nº 3.
pp. 1225-1234.
Bel Haj Youssef, Nesrine, Al-Haddad, Kamal et Kanaan, Hadi Y..
2008.
« Implementation of a new linear control technique based on experimentally validated small-signal model of three-phase three-level boost-type Vienna rectifier ».
IEEE Transactions on Industrial Electronics, vol. 55, nº 4.
pp. 1666-1676.
Bel Haj Youssef, Nesrine, Al-Haddad, Kamal et Kanaan, Hadi Y..
2008.
« Large-signal modeling and steady-state analysis of a 1.5-kW three-phase/switch/level (Vienna) rectifier with experimental validation ».
IEEE Transactions on Industrial Electronics, vol. 55, nº 3.
pp. 1213-1224.
Ben Ayed, Ismail et Mitiche, Amar.
2008.
« A region merging prior for variational level set image segmentation ».
IEEE Transactions on Image Processing, vol. 17, nº 12.
pp. 2301-2311.
Berthiaume, François, Gravel, Pierre et de Guise, Jacques A..
2008.
« Bone enhancement in digital dual energy radiographs from normalization with a synthetic background image ».
Physics in Medicine and Biology, vol. 53, nº 5.
pp. 1259-1275.
Bigras, Pascal, Lambert, Michel et Perron, Claude.
2008.
« New optimal formulation for an industrial robot force controller ».
International Journal of Robotics and Automation, vol. 23, nº 3.
pp. 199-208.
Biskri, D. E. et Botez, Ruxandra.
2008.
« Method for aerodynamic unsteady forces time calculations on an F/A-18 aircraft ».
Aeronautical Journal, vol. 112, nº 1127.
pp. 27-32.
Biskri, D. E., Botez, Ruxandra, Stathopoulos, N., Therien, S., Dickinson, M. et Rathe, A..
2008.
« Aeroservoelasticity analysis method based on an error analytical form applied on a business aircraft ».
Journal of Vibration and Control, vol. 14, nº 8.
pp. 1217-1230.
Bizi, Claudia Maria Pena et Demarquette, Nicole R..
2008.
« Effect of the processing conditions and the addition of trans-polyoctenylene rubber on the properties of natural rubber/styrene–butadiene rubber blends ».
Journal of Applied Polymer Science, vol. 109, nº 1.
pp. 445-451.
Boivin, Karine, Hagemeister, Nicola, Turcot, Katia, Pelletier, Michel, Aissaoui, Rachid, Prince, François et de Guise, Jacques A..
2008.
« The relationship of frontal plane knee kinematics with knee alignment and adduction moment ».
[Résumé d'une communication à une conférence]. Journal of Biomechanics, vol. 41, nº suppl. 1.
S206.
Bonenfant, D., Kharoune, Mourad, Niquette, Patrick, Mimeault, M. et Hausler, Robert.
2008.
« Advances in principal factors influencing carbon dioxide adsorption on zeolites ».
Science and Technology of Advanced Materials, vol. 9, nº 1.
pp. 1-7.
Bonenfant, Danielle, Kharoune, Lynda, Sauvé, Sébastien, Hausler, Robert, Niquette, Patrick, Mimeault, M. et Kharoune, Mourad.
2008.
« CO2 sequestration by aqueous red mud carbonation at ambient pressure and temperature ».
Industrial and Engineering Chemistry Research, vol. 47, nº 20.
pp. 7617-7622.
Bonenfant, Danielle, Kharoune, Lynda, Sauvé, Sébastien, Hausler, Robert, Niquette, Patrick, Mimeault, Murielle et Kharoune, Mourad.
2008.
« CO2 sequestration potential of steel slags at ambient pressure and temperature ».
Industrial and Engineering Chemistry Research, vol. 47, nº 20.
pp. 7610-7616.
Botez, Ruxandra, Grigorie, Lucian, Hiliuta, Adrian et Ciocan, L..
2008.
« Rigid and control modes aerodynamic unsteady forces aeroservoelastic modeling ».
Journal of Guidance, Control, and Dynamics, vol. 31, nº 5.
pp. 1372-1385.
Bouikni, Nadjib, Rivest, Louis et Desrochers, Alain.
2008.
« A multiple views management system for concurrent engineering and PLM ».
Concurrent Engineering: Research and Applications, vol. 16, nº 1.
pp. 61-72.
Boulé, Marc et Zilic, Zeljko.
2008.
« Automata-based assertion-checker synthesis of PSL properties ».
ACM Transactions on Design Automation of Electronic Systems, vol. 13, nº 1.
Bousselham, Abdelhak et Chaallal, Omar.
2008.
« Mechanisms of shear resistance of concrete beams strengthened in shear with externally bonded FRP ».
Journal of Composites for Construction, vol. 12, nº 5.
pp. 499-512.
Boutana, N., Bocher, P., Jahazi, M., Piot, D. et Montheillet, F..
2008.
« Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 32, nº 2.
pp. 195-213.
Boutana, N., Bocher, Philippe, Jahazi, M., Piot, D. et Montheillet, F..
2008.
« The microstructural modeling of room temperature creep in titanium alloys using cellular automata model ».
International Journal of Microstructure and Materials Properties, vol. 3, nº 4-5.
pp. 642-653.
Bouzidane, A. et Thomas, Marc.
2008.
« An electrorheological hydrostatic journal bearing for controlling rotor vibration ».
Computers and Structures, vol. 86, nº 3-5.
pp. 463-472.
Bouzidane, A., Thomas, Marc et Lakis, A. A..
2008.
« Nonlinear dynamic behavior of a rigid rotor supported by hydrostatic squeeze film dampers ».
Journal of Tribology, vol. 130, nº 4.
041102-1.
Briot, Sébastien, Arakelian, Vigen, Bonev, Ilian A., Chablat, Damien et Wenger, Philippe.
2008.
« Self-motions of general 3-RPR planar parallel robots ».
The International Journal of Robotics Research, vol. 27, nº 7.
pp. 855-866.
Briot, Sébastien et Bonev, Ilian A..
2008.
« Accuracy analysis of 3-DOF planar parallel robots ».
Mechanism and Machine Theory, vol. 43, nº 4.
pp. 445-458.
Brodeur, Philippe et Masson, Christian.
2008.
« Numerical site calibration over complex terrain ».
Journal of Solar Energy Engineering, vol. 130, nº 3.
031020 (12 p.).
Buntinas, Darius, Coti, Camille, Herault, Thomas, Lemarinier, Pierre, Pilard, Laurence, Rezmerita, Ala, Rodriguez, Eric et Cappello, Franck.
2008.
« Blocking vs. non-blocking coordinated checkpointing for large-scale fault tolerant MPI Protocols ».
Future Generation Computer Systems, vol. 24, nº 1.
pp. 73-84.
Canetto, Pierre et Voix, Jérémie.
2008.
« Hearing protectors “real world” performance and the European Directive 2003/10/EC ».
Noise/News International, vol. 16, nº 4.
pp. 134-138.
Cao, X. et Jahazi, M..
2008.
« Overview of friction stir and laser welding techniques for lightweight alloys ».
Canadian Welding Association Journal.
pp. 19-30.
Cao, X., Jahazi, M., Al-Kazzaz, H. et Medraj, M..
2008.
« Modelling of work-hardening behaviour for laser welded magnesium alloy ».
International Journal of Materials Research, vol. 99, nº 2.
pp. 216-221.
Cao, X., Jahazi, M., Fournier, J. et Alain, M..
2008.
« Optimization of bead spacing during laser cladding of ZE41A-T5 magnesium alloy castings ».
Journal of Materials Processing Technology, vol. 205, nº 1–3.
pp. 322-331.
Cao, X., Xiao, M., Jahazi, M., Fournier, J. et Alain, M..
2008.
« Optimization of processing parameters during laser cladding of ZE41A-T5 magnesium alloy castings using Taguchi method ».
Materials and Manufacturing Processes, vol. 23, nº 4.
pp. 413-418.
Carastan, DaniloJustino, Demarquette, Nicole Raymonde, Vermogen, Alexandre et Masenelli-Varlot, Karine.
2008.
« Linear viscoelasticity of styrenic block copolymers–clay nanocomposites ».
Rheologica Acta, vol. 47, nº 5-6.
pp. 521-536.
Caron, Annie, Leconte, Robert et Brissette, François.
2008.
« An improved stochastic weather generator for hydrological impact studies ».
Canadian Water Resources Journal = Revue canadienne des ressources hydriques, vol. 33, nº 3.
pp. 233-256.
Catley, A. J., Samson, C. et Van Geel, P. J..
2008.
« Seismic velocity analysis to determine moisture distribution in a bioreactor landfill ».
Journal of Solid Waste Technology and Management, vol. 34, nº 2.
pp. 81-90.
Chatelain, Jean-François, Roy, Réjean et Mayer, René.
2008.
« Development of a spiral trajectory for high speed roughing of light alloy aerospace components ».
WSEAS Transactions on Applied and Theoretical Mechanics, vol. 3, nº 3.
pp. 83-93.
Chiocchio, François et Forgues, Daniel.
2008.
« Le rôle des objets-frontières dans l’apprentissage et la performance d’équipes d’étudiants travaillant à des projets de conception de bâtiments ».
Revue internationale des technologies en pédagogie universitaire, vol. 5, nº 3.
pp. 6-21.
Chion, Clement, Landry, Jacques-André et Da Costa, Luis.
2008.
« A genetic-programming-based method for hyperspectral data information extraction: Agricultural applications ».
IEEE Transactions on Geoscience and Remote Sensing, vol. 46, nº 8.
pp. 2446-2457.
Chouinard, Marc, D'Amours, Sophie et Aït-Kadi, Daoud.
2008.
« A stochastic programming approach for designing supply loops. ».
International Journal of Production Economics, vol. 113, nº 2.
pp. 657-677.
Crobeddu, E., Allali, S. et Bennis, S..
2008.
« Washoff model of total suspended particles in urban areas ».
WIT Transactions on Ecology and the Environment, vol. 111.
pp. 351-360.
Cuadrado-Gallego, Juan J. et Abran, Alain.
2008.
« Special issue on software process and product measurement ».
[Éditorial]. Journal of Systems and Software, vol. 81, nº 5.
pp. 601-602.
Dalpé, Benoit et Masson, Christian.
2008.
« Numerical study of fully developed turbulent flow within and above a dense forest ».
Wind Energy, vol. 11, nº 5.
pp. 503-515.
Dastous, P. A., Nikiema, J., Maréchal, D., Racine, L. et Lacoursière, J. P..
2008.
« Risk management: All stakeholders must do their part ».
Journal of Loss Prevention in the Process Industries, vol. 21, nº 4.
pp. 367-373.
Dastous, P. A., Nikiema, J., Soreanu, G., Bibeau, L. et Heitz, M..
2008.
« Elimination of methanol and ethanol by biofiltration: An experimental study ».
Water, Air, and Soil Pollution: Focus, vol. 8, nº 3-4.
pp. 275-285.
De Crescenzo, Gregory, Woodward, Lyne et Srinivasan, Bala.
2008.
« Online optimization of surface plasmon resonance-based biosensor experiments for improved throughput and confidence ».
Journal of Molecular Recognition, vol. 21, nº 4.
pp. 256-266.
Dehayem Nodem, F.I., Kenné, Jean-Pierre et Gharbi, Ali.
2008.
« Joint optimization of capacity expansion, production and maintenance in stochastic manufacturing systems ».
Applied Mathematical Sciences, vol. 2, nº 5.
pp. 195-212.
Delhoménie, Marie-Caroline, Nikiema, Josiane, Bibeau, Louise et Heitz, Michèle.
2008.
« A new method to determine the microbial kinetic parameters in biological air filters ».
Chemical Engineering Science, vol. 63, nº 16.
pp. 4126-4134.
Desfossés, Y., Laporte, Claude Y., April, Alain et Berrhouma, Nabil.
2008.
« Méthode d'amélioration des services de TI, basée sur ITIL, dans les entreprises québécoises ».
Génie Logiciel, nº 86.
pp. 47-59.
Desgroux, P., Mercier, X., Lefort, B., Lemaire, R., Therssen, E. et Pauwels, J. F..
2008.
« Soot volume fraction measurement in low-pressure methane flames by combining laser-induced incandescence and cavity ring-down spectroscopy: Effect of pressure on soot formation ».
Combustion and Flame, vol. 155, nº 1–2.
pp. 289-301.
Desmarais, Mathieu et Aissaoui, Rachid.
2008.
« Modeling of knee articular cartilage dissipation during gait analysis ».
Journal of Mechanics in Medicine and Biology, vol. 8, nº 3.
pp. 377-394.
Desroches, G., Aissaoui, Rachid et Bourbonnais, D..
2008.
« Relationship between resultant force at the pushrim and the net shoulder joint moments during manual wheelchair propulsion in elderly persons ».
Archives of Physical Medicine and Rehabilitation, vol. 89, nº 6.
pp. 1155-1161.
Desroches, Guillaume, Aissaoui, Rachid et Bourbonnais, Daniel.
2008.
« The effect of resultant force at the pushrim on shoulder kinetics during manual wheelchair propulsion: a simulation study ».
IEEE Transactions on Biomedical Engineering, vol. 55, nº 4.
pp. 1423-1431.
Dhouib, K., Gharbi, Ali et Ayed, S..
2008.
« Availability and throughput of unreliable, unbuffered production lines with non-homogeneous deterministic processing times ».
International Journal of Production Research, vol. 46, nº 20.
pp. 5651-5677.
Dhouib, K, Gharbi, Ali et Ayed, S.
2008.
« Simulation based throughput assessment of non-homogeneous transfer lines ».
International Journal of Simulation Modelling, vol. 8, nº 1.
pp. 5-15.
Dias de Assuncao, Marcos, Buyya, Rajkumar et Venugopal, Srikumar.
2008.
« Inter Grid: A case for internetworking islands of Grids ».
Concurrency and Computation: Practice and Experience, vol. 20, nº 8.
pp. 997-1024.
Dolez, Patricia, Nohile, C., Anh, T. H., Vu-Khanh, Toan, Benoit, R. et Bellavigna-Ladoux, O..
2008.
« Exploring the chemical aspects of truck tire blowouts and explosions ».
Safety Science, vol. 46, nº 9.
pp. 1334-1344.
Dolez, Patricia, Vu-Khanh, Toan, Nguyen, C.Thang, Guero, Gbeuli, Gauvin, Chantal et Lara, Jaime.
2008.
« Influence of medical needle characteristics on the resistance to puncture of protective glove materials ».
Journal of ASTM International, vol. 5, nº 1.
Dos Santos, Eulanda M., Sabourin, Robert et Maupin, Patrick.
2008.
« A dynamic overproduce-and-choose strategy for the selection of classifier ensembles ».
Pattern Recognition, vol. 41, nº 10.
pp. 2993-3009.
Doutres, O., Dauchez, N., Génevaux, J. M. et Dazel, O..
2008.
« Validity of the one-dimensional limp model for porous media ».
Acta Polytechnica, vol. 48, nº 3.
pp. 61-65.
Doutres, Olivier, Dauchez, Nicolas, Genevaux, Jean-Michel et Lemarquand, Guy.
2008.
« On the use of a loudspeaker for measuring the viscoelastic properties of sound absorbing materials ».
Journal of the Acoustical Society of America, vol. 124, nº 6.
EL335-EL340.
Dubé, M., Hubert, P., Yousefpour, A. et Denault, J..
2008.
« Current leakage prevention in resistance welding of carbon fibre reinforced thermoplastics ».
Composites Science and Technology, vol. 68, nº 6.
pp. 1579-1587.
Dubé, Martine, Hubert, Pascal, Gallet, Jan N. A. H., Stavrov, Darko, Bersee, Harald E. N. et Yousefpour, Ali.
2008.
« Fatigue performance characterisation of resistance-welded thermoplastic composites ».
Composites Science and Technology, vol. 68, nº 7–8.
pp. 1759-1765.
Dubousset, J., Charpak, G., Skalli, W., de Guise, Jacques A., Kalifa, G. et Wicart, P..
2008.
« Modélisation vertébrale et squelettique par le système EOS ».
Archives de Pédiatrie, vol. 15, nº 5.
pp. 665-666.
Dubousset, Jean, Charpak, Georges, Dorion, Rène, Lavaste, François, Skalli, Wafa, Deguise, Jacques, Kalifa, Gabriel et Ferey, Solène.
2008.
« New technique for 2D/3D low-dose bone and joint imaging in the upright position ».
[Résumé d'une communication à une conférence]. Orthopaedic Proceedings, vol. 90-B, nº SUPP_II.
p. 253.
El Kasmi, Amina et Masson, Christian.
2008.
« An extended k–ε model for turbulent flow through horizontal-axis wind turbines ».
Journal of Wind Engineering and Industrial Aerodynamics, vol. 96, nº 1.
pp. 103-122.
El-Bazzal, Zouhair, Kadoch, Michel, Agba, Basile L., Haidar, Mohamad et Gagnon, François.
2008.
« A quality of service driven approach for clustering in mobile ad hoc networks based on metrics adaptation : looking beyond clustering ».
Journal of Communications Software and Systems, vol. 4, nº 4.
pp. 254-265.
El-Rich, M., Wagnac, Éric, Arnoux, P. J. et Aubin, C. E..
2008.
« Detailed modelling of the lumbar spine for trauma applications: preliminary results ».
Computer Methods in Biomechanics and Biomedical Engineering, vol. 11, nº suppl. 1.
pp. 93-94.
Esmailzadeh, M., Lakis, A. A., Thomas, Marc et Marcouiller, L..
2008.
« Three-dimensional modeling of curved structures containing and/or submerged in fluid ».
Finite Elements in Analysis and Design, vol. 44, nº 6-7.
pp. 334-345.
Faleh, Yassine, Essid, Chaker, Khebir, Ahmed, Kouki, Ammar B. et Samet, Abdelaziz.
2008.
« Numerical reconstruction of permeability material using 3-D T- Ω formulation of finite element method ».
PIERS Online, vol. 4, nº 6.
pp. 661-665.
Favre, Julien, Jolles, B. M., Aissaoui, Rachid et Aminian, K..
2008.
« Ambulatory measurement of 3D knee joint angle ».
Journal of Biomechanics, vol. 41, nº 5.
pp. 1029-1035.
Fechine, G. J. M. et Demarquette, N. R..
2008.
« Cracking formation on the surface of extruded photodegraded polypropylene plates ».
Polymer Engineering and Science, vol. 48, nº 2.
pp. 365-372.
Forouzanfar, Mohamad, Moghaddam, Hamid Abrishami et Ghadimi, Sona.
2008.
« Locally adaptive multiscale bayesian method for image denoising based on bivariate normal inverse gaussian distributions ».
International Journal of Wavelets, Multiresolution and Information Processing, vol. 06, nº 04.
pp. 653-664.
Fortin Blanchette, Handy et Al-Haddad, Kamal.
2008.
« An efficient approach to design discrete packaging of bidirectional resonant power switch for matrix converter applications ».
IEEE Transactions on Power Electronics, vol. 23, nº 4.
pp. 2195-2200.
Foucault, Gilles, Cuillière, Jean-Christophe, François, Vincent, Léon, Jean-Claude et Maranzana, Roland.
2008.
« Adaptation of CAD model topology for finite element analysis ».
Computer-Aided Design, vol. 40, nº 2.
pp. 176-196.
Fromageau, J., Lerouge, Sophie, Maurice, R. L., Soulez, G. et Cloutier, G..
2008.
« Noninvasive vascular ultrasound elastography applied to the characterization of experimental aneurysms and follow-up after endovascular repair ».
Physics in Medicine and Biology, vol. 53, nº 22.
pp. 6475-6490.
Gabrea, Gheorghe Marcel.
2008.
« Robust detection of filled pauses in spontaneous conversational speech ».
Transactions on Electronics and Communications, vol. 53, nº 2.
pp. 21-24.
Gabrea, Gheorghe Marcel.
2008.
« Two microphones speech enhancement system based on instrumental variable algorithms ».
Transactions on Electronics and Communications, vol. 53, nº 2.
pp. 25-28.
Gagné, F., André, C., Cejka, P., Hausler, R., Fournier, M. et Blaise, C..
2008.
« Immunotoxic effects on freshwater mussels of a primary-treated wastewater before and after ozonation: a pilot plant study ».
Ecotoxicology and Environmental Safety, vol. 69, nº 3.
pp. 366-373.
Gagnon, Christian, Lajeunesse, André, Cejka, Patrick, Gagne, François et Hausler, Robert.
2008.
« Degradation of selected acidic and neutral pharmaceutical products in a primary-treated wastewater by disinfection processes ».
Ozone: Science and Engineering, vol. 30, nº 5.
pp. 387-392.
Gagnon, Ghyslain et MacEachern, L..
2008.
« Digital compensation of DAC mismatches in multibit delta-sigma ADCs ».
Electronics Letters, vol. 44, nº 12.
pp. 721-722.
Gaudreau, M.-A., Laville, Frédéric, Voix, Jérémie et Nélisse, Hugues.
2008.
« État de l'art et perspectives sur la mesure des performances effectives des protecteurs auditifs en milieu de travail ».
Revue Internationale sur l'Ingénierie des Risques Industriels, vol. 1, nº 1.
pp. 65-85.
Gaudreau, Marc-André, Laville, Frédéric, Nelisse, Hugues et Voix, Jérémie.
2008.
« Méthode de mesures terrain de l'atténuation F-MIRE de protecteurs auditifs durant un quart de travail ».
Canadian Acoustics = Acoustique Canadienne, vol. 36, nº 2.
pp. 3-10.
Gauthier, Guy et Boulet, Benoit.
2008.
« Robust design of terminal ILC with H-infinity mixed sensitivity approach for a thermoforming oven ».
Journal of Control Science and Engineering, vol. 2008.
Germain, L., Gey, N., Humbert, M., Vo, P., Jahazi, M. et Bocher, Philippe.
2008.
« Texture heterogeneities induced by subtransus processing of near alpha titanium alloys ».
Acta Materialia, vol. 56, nº 16.
pp. 4298-4308.
Gharbi, Ali, Pellerin, Robert et Sadr, Javad.
2008.
« Production rate control for stochastic remanufacturing systems ».
International Journal of Production Economics, vol. 112, nº 1.
pp. 37-47.
Goutaland, David, Winiarski, Thierry, Dubé, Jean-Sébastien, Bievre, Gregory, Buoncristiani, Jean-Francois, Chouteau, Michel et Giroux, Bernard.
2008.
« Hydrostratigraphic characterization of galciofluvial deposits underlying an infiltration basin using ground penetrating radar ».
Vadose Zone Journal, vol. 7, nº 1.
pp. 194-207.
Grami, Said et Bigras, Pascal.
2008.
« Identification of the GMS friction model based on a robust adaptive observer ».
International Journal of Modelling, Identification and Control, vol. 5, nº 4.
pp. 297-304.
Grigorie, Lucian Teodor et Botez, Ruxandra.
2008.
« The bias temperature dependence estimation and compensation for an accelerometer by use of the neuro-fuzzy techniques ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 32, nº 3-4.
pp. 383-400.
Grova, C., Daunizeau, J., Kobayashi, E., Bagshaw, A. P., Lina, Jean Marc, Dubeau, F. et Gotman, J..
2008.
« Concordance between distributed EEG source localization and simultaneous EEG-fMRI studies of epileptic spikes ».
Neurolmage , vol. 39, nº 2.
pp. 755-774.
Habra, Naji, Abran, Alain, Lopez, Miguel et Sellami, Asma.
2008.
« A framework for the design and verification of software measurement methods ».
Journal of Systems and Software, vol. 81, nº 5.
pp. 633-648.
Habra, Naji, Alexandre, Simon, Desharnais, Jean-Marc, Laporte, Claude Y. et Renault, Alain.
2008.
« Initiating software process improvement in very small enterprises: experience with a light assessment tool ».
Information and Software Technology, vol. 50, nº 7-8.
pp. 763-771.
Hacini, Lyes, Lê, Van Ngan et Bocher, Philippe.
2008.
« Effect of impact energy on residual stresses induced by hammer peening of 304L plates ».
Journal of Materials Processing Technology, vol. 208, nº 1-3.
pp. 542-548.
Hagemeister, Nicola, Parent, Gerald, Husse, Sabine et de Guise, Jacques A..
2008.
« A simple and rapid method for electromagnetic field distortion correction when using two fastrak sensors for biomechanical studies ».
Journal of Biomechanics, vol. 41, nº 8.
pp. 1813-1817.
Haillot, Didier, Py, Xavier, Goetz, Vincent et Benabdelkarim, Mohamed.
2008.
« Storage composites for the optimisation of solar water heating systems ».
Chemical Engineering Research and Design, vol. 86, nº 6.
pp. 612-617.
Hallé, Stéphane, Nadeau, Sylvie et Rodier, Diane.
2008.
« L'intégration de connaissances en santé et sécurité du travail en formation universitaire : Le cas du génie mécanique au Québec ».
Hygiène et Sécurité du Travail , vol. 210.
pp. 59-63.
Hamouda, M., Fnaiech, F. et Al-Haddad, K..
2008.
« Modeling and adaptive control of two-stage matrix converters ».
International Review of Electrical Engineering, vol. 3, nº 1.
pp. 83-92.
Haouzia, Adil et Noumeir, Rita.
2008.
« Methods for image authentication: a survey ».
Multimedia Tools and Applications, vol. 39, nº 1.
pp. 1-46.
Harker, Matthew, O'Leary, Paul et Zsombor-Murray, Paul.
2008.
« Direct type-specific conic fitting and eigenvalue bias correction ».
Image and Vision Computing, vol. 26, nº 3.
pp. 372-381.
Harrabi, Lofti, Dolez, Patricia, Vu-Khanh, Toan, Lara, Jaime, Tremblay, Guy, Nadeau, Sylvie et Larivière, Christian.
2008.
« Characterization of protective gloves stiffness: development of a multidirectional deformation test method ».
Safety Science, vol. 46, nº 7.
pp. 1025-1036.
Harrabi, Lotfi, Dolez, Patricia, Vu-Khanh, Toan et Lara, Jaime.
2008.
« Evaluation of the flexibility of protective gloves ».
International Journal of Occupational Safety and Ergonomics, vol. 14, nº 1.
pp. 61-68.
Hausler, Robert, Hébert, N., Gagné, P., Cejka, P., Bouchard, B., Cyr, D.G., Blaise, C. et Fournier, M..
2008.
« Effects of ozone, ultraviolet and peracetic acid disinfection of a primary-treated municipal effluent on the immune system of rainbow trout (oncorhynchus mykiss) ».
Comparative Biochemistry and Physiology Part C: Toxicology & Pharmacology, vol. 148, nº 2.
pp. 122-127.
Hejazi, Seyed Mahmood, Debbabi, Mourad et Talhi, Chamseddine.
2008.
« Automated windows memory file extraction for cyber forensics investigation ».
Journal of Digital Forensic Practice, vol. 2, nº 3.
pp. 117-131.
Hernandez, Leonardo Frois, Lima, Roberto Da Rocha, De Carvalho, Alexsander Tressino, Demarquette, Nicole R. et Da Silva, Maria Lúcia Pereira.
2008.
« Plasma polymerized acetaldehyde thin films for retention of volatile organic compounds ».
Química Nova, vol. 31, nº 6.
pp. 1410-1416.
Hochart, Clement, Fortin, Guy, Perron, Jean et Ilinca, Adrian.
2008.
« Wind turbine performance under icing conditions ».
Wind Energy, vol. 11, nº 4.
pp. 319-333.
Humbert, Ludovic, de Guise, Jacques A., Godbou, B., Parent, S., Dubousset, J. et Skalli, W..
2008.
« Comparative study of scoliotic spines using a fast 3D reconstruction method from biplanar X-rays ».
Computer Methods in Biomechanics and Biomedical Engineering, vol. 11, nº suppl. 1.
pp. 117-118.
Iassinovski, Serguei, Artiba, Abdelhakim et Fagnart, Christophe.
2008.
« SD Builder® : a production rules-based tool for on-line simulation, decision making and discrete process control ».
Engineering Applications of Artificial Intelligence, vol. 21, nº 3.
pp. 406-418.
Ibrahim, H., Ilinca, A. et Perron, J..
2008.
« Energy storage systems-Characteristics and comparisons ».
Renewable and Sustainable Energy Reviews, vol. 12, nº 5.
pp. 1221-1250.
Jaber, M. B., Smaoui, H. et Terriault, Patrick.
2008.
« Finite element analysis of a shape memory alloy three-dimensional beam based on a finite strain description ».
Smart Materials and Structures, vol. 17, nº 4.
Janvier, Marie-Ange, Durand, Louis-Gilles, Cardinal, Marie-Hélène Roy, Renaud, Isabelle, Chayer, Boris, Bigras, Pascal, de Guise, Jacques A., Soulez, Gilles et Cloutier, Guy.
2008.
« Performance evaluation of a medical robotic 3D-ultrasound imaging system ».
Medical Image Analysis, vol. 12, nº 3.
pp. 275-290.
Jolicoeur, P., Grimault, S., Robitaille, N. et Lina, Jean-Marc.
2008.
« Electromagnetic explorations of the temporal dynamics of visual short-term memory ».
[Résumé d'une communication à une conférence]. International Journal of Psychology, vol. 43, nº 3-4.
p. 8.
Kahlaoui, Abdelilah, Abran, Alain et Lefebvre, Éric.
2008.
« DSML success factors and their assessment criteria ».
Metrics News, vol. 13, nº 1.
pp. 43-51.
Kalva, P. R., Enembreck, F. et Koerich L., A..
2008.
« WEB image classification using combination of classifiers ».
IEEE Latin America Transactions, vol. 6, nº 7.
pp. 661-671.
Kanaan, H. Y. et Al-Haddad, Kamal.
2008.
« Réduction du TDH d'un redresseur triphasé par réglage du courant injecté ».
Revue Internationale de Génie électrique, vol. 11, nº 1.
pp. 41-68.
Kanaan, H. Y., Mougharbel, I. et Al Haddad, Kamal.
2008.
« Average modeling and carrier-based control strategies applied to a three-phase four-leg shunt active power filter ».
International Review of Electrical Engineering, vol. 3, nº 5.
pp. 844-857.
Karbassi, A. et Nollet, Marie-José.
2008.
« Development of an index assignment procedure compatible with the regional seismicity in the province of Quebec for the rapid visual screening of existing buildings ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 35, nº 9.
pp. 925-937.
Kenné, Jean Pierre et Nkeungoue, L. J..
2008.
« Simultaneous control of production, preventive and corrective maintenance rates of a failure-prone manufacturing system ».
Applied Numerical Mathematics, vol. 58, nº 2.
pp. 180-194.
Kenny, P., Ouellet, P., Dehak, N., Gupta, V. et Dumouchel, Pierre.
2008.
« A study of interspeaker variability in speaker verification ».
IEEE Transactions on Audio, Speech and Language Processing, vol. 16, nº 5.
pp. 980-988.
Kerboua, Y., Lakis, A. A., Thomas, Marc et Marcouiller, L..
2008.
« Computational modeling of coupled fluid-structure systems with applications ».
Structural Engineering and Mechanics, vol. 29, nº 1.
pp. 91-111.
Kerboua, Y., Lakis, A. A., Thomas, Marc et Marcouiller, L..
2008.
« Vibration analysis of rectangular plates coupled with fluid ».
Applied Mathematical Modelling, vol. 32, nº 12.
pp. 2570-86.
Khadkikar, V. et Chandra, Ambrish.
2008.
« A new control philosophy for a unified power quality conditioner (UPQC) to coordinate load-reactive power demand between shunt and series inverters ».
IEEE Transactions on Power Delivery, vol. 23, nº 4.
pp. 2522-2534.
Khayati, K., Bigras, Pascal et Dessaint, Louis-A..
2008.
« Force control loop affected by bounded uncertainties and unbounded inputs for pneumatic actuator systems ».
Journal of Dynamic Systems, Measurement, and Control, vol. 130, nº 1.
011007-1 .
Khettabi, R., Songmene, Victor, Masounave, Jacques et Zaghbani, Imed.
2008.
« Understanding the formation of nano and micro particles during metal cutting ».
International Journal of Systems Signal Control and Engineering Applications, vol. 1, nº 3.
pp. 203-210.
Khmelevskaya, I. Yu, Prokoshkin, S. D., Trubitsyna, I. B., Belousov, M. N., Dobatkin, S. V., Tatyanin, E. V., Korotitskiy, A. V., Brailovski, Vladimir, Stolyarov, V. V. et Prokofiev, E. A..
2008.
« Structure and properties of Ti-Ni-based alloys after equal-channel angular pressing and high-pressure torsion ».
Materials Science and Engineering: A, vol. 481-482.
pp. 119-122.
Kubicki, M., Styner, M., Bouix, S., Gerig, G., Markant, D., Smith, K., Kikinis, R., McCarley, R. W. et Shenton, M. E..
2008.
« Reduced interhemispheric connectivity in schizophrenia-tractography based segmentation of the corpus callosum ».
Schizophrenia Research, vol. 106, nº 2-3.
pp. 125-131.
Labbe, David R., de Guise, Jacques A., Godbout, Véronique, Fernandes, Julio et Hagemeister, Nicola.
2008.
« Development of an objective measurement tool for the pivot shift phenomenon of the knee ».
[Résumé d'une communication à une conférence]. Journal of Biomechanics, vol. 41, nº Suppl. 1.
S207.
Labbe, David R., Hagemeister, Nicola, Tremblay, Mathieu et de Guise, Jacques A..
2008.
« Reliability of a method for analyzing three-dimensional knee kinematics during gait ».
Gait and Posture, vol. 28, nº 1.
pp. 170-174.
Lacasse, Louis, Tahan, Antoine et Liu, Zhaoheng.
2008.
« Robust method for the automatic characterization of a wooden board's geometrical state ».
Quality Engineering, vol. 20, nº 2.
pp. 221-231.
Lamarche, L., Dupré, G. et Kajl, S..
2008.
« A new design approach for ground source heat pumps based on hourly load simulations ».
Renewable Energy and Power Quality Journal, vol. 1, nº 6.
pp. 480-484.
Lamarre, Laurent et David, Éric.
2008.
« Temperature dependence of the resistance of modern epoxy mica insulation of HV rotating machines ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 15, nº 5.
pp. 1305-1312.
Langar, Rami, Bouabdallah, Nizar et Boutaba, Raouf.
2008.
« A comprehensive analysis of mobility management in MPLS-based wireless access networks ».
IEEE/ACM Transactions on Networking, vol. 16, nº 4.
pp. 918-931.
Laporte, Catherine et Arbel, Tal.
2008.
« Combinatorial and probabilistic fusion of noisy correlation measurements for untracked freehand 3-D ultrasound ».
IEEE Transactions on Medical Imaging, vol. 27, nº 7.
pp. 984-994.
Laporte, Claude Y., Alexandre, Simon et Renault, Alain.
2008.
« Developing international standards for very small enterprises ».
Computer, vol. 41, nº 3.
pp. 98-101.
Laporte, Claude Y., Roy, Denis et Novieli, Rosalia.
2008.
« La gestion des risques d'un projet de développement et d'implantation d'un système informatisé au Ministère de la Justice du Québec ».
Génie Logiciel, nº 84.
pp. 2-12.
Lavigne, Martin, Rama, Rkbs, Ganapathi, Muthu, Nuño, Natalia, Winzenrieth, Renaud et Vendittoli, Pascal- André.
2008.
« Factors affecting acetabular bone loss during primary hip arthroplasty - A quantitative analysis using computer simulation ».
Clinical Biomechanics, vol. 23, nº 5.
pp. 577-583.
Lavoie, Frédéric, Laplante, Martin, Duval, Nicolas, Doré, Sylvie et de Guise, Jacques A..
2008.
« Gesture as an important factor in 3D kinematic assessment of the knee ».
Knee Surgery, Sports Traumatology, Arthroscopy, vol. 16, nº 1.
pp. 64-70.
Lefebvre, Louis et Laville, Frédéric.
2008.
« Noise source identification for mechanical systems generating periodic impacts ».
Applied Acoustics, vol. 69, nº 9.
pp. 812-823.
Li, Y., De Guise, J. A., Aissaoui, R., Duval, N., Hagemeister, N., Boivin, K., Turcot, K., Roy, A. et Pontbriand, R..
2008.
« 3D kinematic pattern classification of healthy knee joints and comparison with osteoarthritis joints ».
[Résumé d'une communication à une conférence]. Orthopaedic Proceedings, vol. 90-B, nº Suppl. I.
p. 130.
Lima, R. R., Hernandez, L. F., Fachini, E., Demarquette, N. R. et Silva, M. L. P..
2008.
« Comparison of adsorbent films obtained by plasma polymerization of oxygenated organic compounds ».
[Article de conférence]. Sensors and Actuators, B: Chemical, vol. 130, nº 1.
pp. 110-119.
Lina, Jean Marc, Dehaes, M., Matteau-Pelletier, C. et Lesage, F..
2008.
« Complex wavelets applied to diffuse optical spectroscopy for brain activity detection ».
Optics Express, vol. 16, nº 2.
pp. 1029-1050.
Liu, Xin-Jun et Bonev, Ilian A..
2008.
« Orientation capability, error analysis, and dimensional optimization of two articulated tool heads with parallel kinematics ».
Journal of Manufacturing Science and Engineering, vol. 130, nº 1.
011015-1 - 9.
Liu, Xinjun, Wu, Chao, Wang, Jinsong et Bonev, Ilian.
2008.
« Attitude description method of [PP]S type parallel robotic mechanisms ».
Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, vol. 44, nº 10.
pp. 19-23.
Loyka, Sergey et Gagnon, François.
2008.
« On outage and error rate analysis of the ordered V-BLAST ».
IEEE Transactions on Wireless Communications, vol. 7, nº 10.
pp. 3679-3685.
Mac-Thiong, J.M., Labelle, H., Charlebois, M., Huot, M. P. et de Guise, J. A..
2008.
« Sagittal plane alignment of spine and pelvis in adolescent idiopathic scoliosis ».
[Résumé d'une communication à une conférence]. Orthopaedic Proceedings, vol. 90-B, nº Suppl. I.
p. 36.
Mac-Thiong, Jean-Marc, Wang, Zhi, de Guise, Jacques A. et Labelle, Hubert.
2008.
« Postural model of sagittal spino-pelvic alignment and its relevance for lumbosacral developmental spondylolisthesis ».
Spine, vol. 33, nº 21.
pp. 2316-2325.
Mandache, Catalin, Dubourg, Laurent, Merati, Ali et Jahazi, Mohammad.
2008.
« Pulsed eddy current testing of friction stir welds ».
Materials Evaluation, vol. 66, nº 4.
pp. 382-387.
Mary, Caroline et Jahazi, Mohammad.
2008.
« Multi-scale analysis of IN-718 microstructure evolution during linear friction welding ».
Advanced Engineering Materials, vol. 10, nº 6.
pp. 573-578.
Masmoudi, Anis, Paquette, Gilbert et Champagne, Roger.
2008.
« Metadata-driven software components aggregation process with reuse ».
International Journal of Advanced Media and Communication, vol. 2, nº 1.
pp. 35-58.
Mezghani, N., Chav, R., Humbert, L., Parent, S., Skalli, W. et de Guise, J. A..
2008.
« A computer-based classifier of three-dimensional spinal scoliosis severity ».
International Journal of Computer Assisted Radiology and Surgery, vol. 3, nº 1-2.
pp. 55-60.
Mezghani, Neila, Boivin, Karine, Turcot, Katia, Aissaoui, Rachid, Hagemeister, Nicola et de Guise, Jacques A..
2008.
« Hierarchical analysis and classification of asymptomatic and knee osteoarthritis gait patterns using a wavelet representation of kinetic data and the nearest neighbor classifier ».
Journal of Mechanics in Medicine and Biology, vol. 8, nº 1.
pp. 45-54.
Mezghani, Neila, Husse, Sabine, Boivin, Karine, Turcot, Katia, Aissaoui, Rachid, Hagemeister, Nicola et de Guise, Jacques A..
2008.
« Automatic classification of asymptomatic and osteoarthritis knee gait patterns using kinematic data features and the nearest neighbor classifier ».
IEEE Transactions on Biomedical Engineering, vol. 55, nº 3.
pp. 1230-1232.
Mezghani, Neila, Mitiche, Amar et Cheriet, Mohamed.
2008.
« Bayes classification of online Arabic characters by Gibbs modeling of class conditional densities ».
IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 30, nº 7.
pp. 1121-1131.
Minville, Marie, Brissette, François et Leconte, Robert.
2008.
« Uncertainty of the impact of climate change on the hydrology of a nordic watershed ».
Journal of Hydrology, vol. 358, nº 1-2.
pp. 70-83.
Miranda, E. et Abran, A..
2008.
« Protecting software development projects against underestimation ».
Project Management Journal, vol. 39, nº 3.
pp. 75-85.
Miraoui, Moeiz, Tadj, Chakib et Ben Amar, Chokri.
2008.
« Architectural survey of context-aware systems in pervasive computing environment ».
Ubiquitous Computing and Communication Journal, vol. 3, nº 3.
pp. 1-9.
Miraoui, Moeiz, Tadj, Chakib et Ben Amar, Chokri.
2008.
« Context modeling and context-aware service adaptation for pervasive computing systems ».
International Journal of Computer and Information Science and Engineering , vol. 2, nº 3.
pp. 148-157.
Montminy, Steeve, Dupuis, Erick et Champliaud, Henri.
2008.
« Mechanical design of a hopper robot for planetary exploration using SMA as a unique source of power ».
Acta Astronautica, vol. 62, nº 6-7.
pp. 438-452.
Mora, Rodrigo, Bédard, Claude et Rivard, Hugues.
2008.
« A geometric modelling framework for conceptual structural design from early digital architectural models ».
Advanced Engineering Informatics, vol. 22, nº 2.
pp. 254-270.
Nadeau, Sylvie, Bouzid, Hakim et Prud’homme, David.
2008.
« Étude du mécanisme lésionnel de la hernie discale : modélisation du comportement élastique non linéaire ».
Revue Internationale sur l'Ingénierie des Risques Industriels, vol. 1, nº 1.
pp. 46-64.
Nadeau, Sylvie, Julien, B. et Arteau, Jean.
2008.
« When system reliability techniques are used to audit manufacturing suppliers in occupational health and safety ».
Buletinul Institutului Politehnic Din Iasi, vol. LIV (LVIII), nº fasc. 3-4.
pp. 55-61.
Nechache, Akli et Bouzid, Abdel-Hakim.
2008.
« On the use of plate theory to evaluate the load relaxation in bolted flanged joints subjected to creep ».
International Journal of Pressure Vessels and Piping, vol. 85, nº 7.
pp. 486-497.
Nechache, Akli et Bouzid, Abdel-Hakim.
2008.
« The effect of cylinder and hub creep on the load relaxation in bolted flanged joints ».
Journal of Pressure Vessel Technology, vol. 130, nº 3.
031211 (9 p.).
Nguyen-Tri, Phuong, Villoutreix, Gilbert et Bui, Chuong.
2008.
« Preparation of recycled polypropylene/organophilic modified layered silicates nanocomposites. Part I: the recycling process of polypropylene and the mechanical properties of recycled polypropylene/organoclay nanocomposites ».
Journal of Reinforced Plastics and Composites, vol. 27, nº 18.
pp. 1983-2000.
Nikiema, J. et Heitz, M..
2008.
« Le biodiesel. I. Caractéristiques, atouts et limites — une synthèse ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 35, nº 1.
pp. 95-106.
Nikiema, J. et Heitz, M..
2008.
« Le biodiesel. II. Production — une synthèse ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 35, nº 1.
pp. 107-117.
Nohile, Cédrick, Dolez, Patricia et Vu-Khanh, Toan.
2008.
« Parameters controlling the swelling of butyl rubber by solvents ».
Journal of Applied Polymer Science, vol. 110, nº 6.
pp. 3926-3933.
Noumeir, Rita.
2008.
« Integrating the healthcare enterprise process ».
International Journal of Healthcare Technology and Management, vol. 9, nº 2.
pp. 167-180.
Nuño, Natalia, Madrala, A. et Plamondon, D..
2008.
« Measurement of transient and residual stresses during polymerization of bone cement for cemented hip implants ».
Journal of Biomechanics, vol. 41, nº 12.
pp. 2605-2611.
Oliveira, C. F. P., Carastan, D. J., Demarquette, N. R. et Fechine, G. J. M..
2008.
« Photooxidative behavior of polystyrene–montmorillonite nanocomposites ».
Polymer Engineering and Science, vol. 48, nº 8.
pp. 1511-1517.
Oliveira, Luciana Alves, Maizia, Mindjid et Melhado, Silvio Burrattino.
2008.
« O desenvolvimento integrado de um projeto de renovação de fachadas: Estudo de um caso francês ».
Gestão & Tecnologia de Projetos, vol. 3, nº 1.
pp. 100-120.
Oliveira, Luciana Alves, Thomaz, Ercio et Melhado, Sílvio Burrattino.
2008.
« Retrofit de fachadas: tecnologias européias ».
Téchne : Revista de Tecnologia da Construção, vol. 16, nº 136.
pp. 56-59.
Oliveira, Luiz E. S., Cavalin, Paulo R., Britto Jr., Alceu S. et Koerich, Alessandro L..
2008.
« Inspeção automática de defeitos em madeiras de pinus usando visão computacional ».
Revista de Informática Teórica e Aplicada, vol. 15, nº 2.
pp. 203-217.
Oliveira, Luiz S., Justino, Edson, Sabourin, Robert et Bortolozzi, Flavio.
2008.
« Combining classifiers in the roc-space for off-line signature verification ».
Journal of Universal Computer Science, vol. 14, nº 2.
pp. 237-251.
Oliveira, Otávio José de et Melhado, Silvio Burratino.
2008.
« Proposta de um modelo de gestão para pequenas empresas de projeto de edifícios ».
Gestão & Tecnologia de Projetos, vol. 3, nº 2.
pp. 106-126.
Ormandjieva, O., Abu Talib, M. et Abran, Alain.
2008.
« Reliability model for component-based systems in cosmic (a case study) ».
International Journal of Software Engineering and Knowledge Engineering, vol. 18, nº 4.
pp. 515-539.
Ortega, Lina M., Le, Van Ngan, Blais, Jean François, Hausler, Robert et Droqui, Patrick.
2008.
« Effectiveness of soil washing, nanofiltration and electrochemical treatment for the recovery of metal ions coming from a contaminated soil ».
Water Research, vol. 42, nº 8-9.
pp. 1943-1952.
Ortega, Lina M., Lebrun, Rémi, Blais, Jean François et Hausler, Robert.
2008.
« Removal of metal ions from an acidic leachate solution by nanofiltration membranes ».
Desalination, vol. 227, nº 1-3.
pp. 204-216.
Ouhimmou, Mustapha, D'Amours, Sophie, Beauregard, Robert, Ait-Kadi, D. et Chauhan, S. S..
2008.
« Furniture supply chain tactical planning optimization using a time decomposition approach ».
European Journal of Operational Research, vol. 189, nº 3.
pp. 952-970.
Paquet, Marc, Martel, A. et Montreuil, B..
2008.
« A manufacturing network design model based on processor and worker capabilities ».
International Journal of Production Research, vol. 46, nº 7.
pp. 2009-2030.
Paradis, A., Terriault, Patrick, Brailovski, Vladimir et Torra, V..
2008.
« On the partial recovery of residual strain accumulated during an interrupted cyclic loading of NiTi shape memory alloys ».
Smart Materials and Structures, vol. 17, nº 6.
Pellecuer, Luc et St-Jacques, Michèle.
2008.
« Dernières avancées sur les carrefours giratoires ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 35, nº 5.
pp. 542-553.
Piccand, Sébastien, Noumeir, Rita et Paquette, Eric.
2008.
« Region of interest and multiresolution for volume rendering ».
IEEE Transactions on Information Technology in Biomedicine, vol. 12, nº 5.
pp. 561-568.
Popov, Andrei Vladimir, Botez, Ruxandra et Labib, Michel.
2008.
« Transition point detection from the surface pressure distribution for controller design ».
Journal of Aircraft, vol. 45, nº 1.
pp. 23-28.
Popov, Andrei Vladimir, Labib, Michel, Fays, Julien et Botez, Ruxandra Mihaela.
2008.
« Closed-loop control simulations on a morphing wing ».
Journal of Aircraft, vol. 45, nº 5.
pp. 1794-1803.
Prokoshkin, S. D., Brailovski, Vladimir, Inaekyan, K. E., Demers, V., Khmelevskaya, I. Yu, Dobatkin, S. V. et Tatyanin, E. V..
2008.
« Structure and properties of severely cold-rolled and annealed Ti-Ni shape memory alloys ».
[Article de conférence]. Materials Science and Engineering: A, vol. 481-482.
pp. 114-118.
Rahmani, S., Al-Haddad, K. et Kanaan, H. Y..
2008.
« Two PWM techniques for single-phase shunt active power filters employing a direct current control strategy ».
IET Power Electronics, vol. 1, nº 3.
pp. 376-385.
Ramachandran, V., Ramachandran, R. P. et Gargour, Christian.
2008.
« New Z-domain continued fraction expansions based on an infinite number of mirror-image and anti-mirror-image polynomial decompositions ».
Journal of Circuits, Systems and Computers, vol. 17, nº 3.
pp. 487-498.
Ramudhin, Amar, Alzaman, Chaher et Bulgak, Akif A..
2008.
« Incorporating the cost of quality in supply chain design ».
Journal of Quality in Maintenance Engineering, vol. 14, nº 1.
pp. 71-86.
Ramudhin, Amar, Paquet, Marc, Artiba, Abdelhakim, Dupré, Pierre, Varvaro, Dominic et Thomson, Vince.
2008.
« A generic framework to support the selection of an RFID-based control system with application to the MRO activities of an aircraft engine manufacturer ».
Production Planning and Control, vol. 19, nº 2.
pp. 183-196.
Rezaei, Mohammad Ali, Abdolmaleki, Parviz, Karami, Zahra, Asadabadi, Ebrahim Barzegari, Sherafat, Mohammad Amin, Abrishami-Moghaddam, Hamid, Fadaie, Marziyeh et Forouzanfar, Mohammad.
2008.
« Prediction of membrane protein types by means of wavelet analysis and cascaded neural networks ».
Journal of Theoretical Biology, vol. 254, nº 4.
pp. 817-820.
Rezki, Z., Haccoun, David, Gagnon, François et Ajib, Wessam.
2008.
« Impact of spatial correlation on the finite-SNR diversity-multiplexing tradeoff ».
IEEE Transactions on Wireless Communications, vol. 7, nº 4.
pp. 1184-1189.
Ribeiro, R., Borges, A. P., Ulbricht, G. et Koerich L., Alessandro.
2008.
« Discovering of action policies in dynamic environments ».
Agora. Revista de Divulgaçao Cientifica, vol. 15, nº 1.
pp. 175-185.
Rousse, Daniel R..
2008.
« A frequency-based numerical approach for unsteady radiative transfer in participating media ».
Energy Conversion and Management, vol. 49, nº 11.
pp. 3259-3264.
Roy, Steven et Liu, Zhaoheng.
2008.
« Road vehicle suspension and performance evaluation using a two-dimensional vehicle model ».
International Journal of Vehicle Systems Modelling and Testing, vol. 3, nº 1-2.
pp. 68-93.
Sabourin, Robert, Ko, Albert H. R. et Britto, Jr.A..
2008.
« From dynamic classifier selection to dynamic ensemble selection ».
Pattern Recognition, vol. 41, nº 5.
pp. 1718-1731.
Sahmoudi, Mohamed et Landry, René Jr.
2008.
« Multipath mitigation techniques using maximum-likelihood principle ».
Inside GNSS, vol. 3, nº 8.
pp. 24-29.
Sassi, S., Badri, B. et Thomas, Marc.
2008.
« Tracking surface degradation of ball bearings by means of new time domain scalar indicators ».
International Journal of COMADEM, vol. 11, nº 3.
pp. 36-45.
Sayadi, Mounir, Sakrane, Samir, Fnaiech, Farhat et Cheriet, Mohamed.
2008.
« Gray-level texture characterization based on a new adaptive nonlinear auto-regressive filter ».
Electronic Letters on Computer Vision and Image Analysis, vol. 7, nº 1.
pp. 40-53.
Sedraoui, K., Fnaiech, Farhat et Al Haddad, Kamal.
2008.
« Solutions for power quality using the advanced UPFC - control strategy and case study ».
International Review of Electrical Engineering, vol. 3, nº 5.
pp. 811-819.
Siddiqi, K., Zhang, J., MacRini, D., Shokoufandeh, A., Bouix, S. et Dickinson, S..
2008.
« Retrieving articulated 3-D models using medial surfaces ».
Machine Vision and Applications, vol. 19, nº 4.
pp. 261-275.
Silla, Carlos N., Koerich, Alessandro L. et Kaestner, Celso A. A..
2008.
« A machine learning approach to automatic music genre classification ».
Journal of the Brazilian Computer Society, vol. 14, nº 3.
pp. 7-18.
Singh, Bhim, Gairola, Sanjay, Singh, Brij N., Chandra, Ambrish et Al-Haddad, Kamal.
2008.
« Multipulse AC-DC converters for improving power quality: a review ».
IEEE Transactions on Power Electronics, vol. 23, nº 1.
pp. 260-281.
Songmene, Victor, Balout, B. et Masounave, Jacques.
2008.
« Clean machining : experimental investigation on dust formation : Part II : influence of machining strategies and drill condition ».
International Journal of Environmentally Conscious Design & Manufacturing, vol. 14, nº 1.
pp. 17-33.
Songmene, Victor, Balout, B. et Masounave, Jacques.
2008.
« Clean machining: experimental investigation on dust formation - Part I: influence of machining parameters and chip formation ».
International Journal of Environmentally Conscious Design & Manufacturing , vol. 14, nº 1.
pp. 1-16.
Soulez, Gilles, Lerouge, Sophie, Darsaut, Tim, Salazkin, Igor, Oliva, Vincent L et Raymond, Jean.
2008.
« Role of the endothelial lining in endoleak formation and persistence after endovascular repair of aneurysm ».
Journal of Vascular and Interventional Radiology, vol. 19, nº 7.
pp. 1070-1078.
Souza, Flávia R. et Melhado, Silvio Burratino.
2008.
« A importância do sistema de informação para a gestão das empresas de projeto ».
Gestão & Tecnologia de Projetos, vol. 3, nº 1.
pp. 121-139.
Sun, S., Yang, D., Villers, D., Zhang, G., Sacher, E. et Dodelet, J. P..
2008.
« Template- and surfactant-free room temperature synthesis of self-assembled 3D Pt nanoflowers from single-crystal nanowires ».
Advanced Materials, vol. 20, nº 3.
pp. 571-574.
Taleb, M., Seffah, A., Abran, A. et Habieb-Mammar, H..
2008.
« Reconciling usability and interactive system architecture using patterns ».
Journal of Systems and Software, vol. 81, nº 11.
pp. 1845-1852.
Talhi, Chamseddine, Tawbi, Nadia et Debbabi, Mourad.
2008.
« Execution monitoring enforcement under memory-limitation constraints ».
Information and Computation, vol. 206, nº 2-4.
pp. 158-184.
Tu, Xiaoping, Dessaint, Louis-A., Champagne, Roger et Al Haddad, Kamal.
2008.
« Transient modeling of squirrel-cage induction machine considering air-gap flux saturation harmonics ».
IEEE Transactions on Industrial Electronics, vol. 55, nº 7.
pp. 2798-2809.
Turcot, Katia, Aissaoui, Rachid, Boivin, Karine, Hagemeister, Nicola, Pelletier, Michel et de Guise, Jacques A..
2008.
« Test-retest reliability and minimal clinical change determination for 3-dimensional tibial and femoral accelerations during treadmill walking in knee osteoarthritis patients ».
Archives of Physical Medicine and Rehabilitation, vol. 89, nº 4.
pp. 732-737.
Turcot, Katia, Aissaoui, Rachid, Boivin, Karine, Pelletier, Michel, Hagemeister, Nicola et de Guise, Jacques A..
2008.
« New accelerometric method to discriminate between asymptomatic subjects and patients with medial knee osteoarthritis during 3-D gait ».
IEEE Transactions on Biomedical Engineering, vol. 55, nº 4.
pp. 1415-1422.
Ung, Bora et Sheng, Yunlong.
2008.
« Optical surface waves over metallo-dielectric nanostructures: Sommerfeld integrals revisited ».
Optics Express, vol. 16, nº 12.
pp. 9073-9086.
Valera, Ticiane Sanches et Demarquette, Nicole Raymonde.
2008.
« Polymer toughening using residue of recycled windshields: PVB film as impact modifier ».
European Polymer Journal, vol. 44, nº 3.
pp. 755-768.
Van Bang, Damien Pham, Lefrançois, Emmanuel, Sergent, Philippe et Bertrand, François.
2008.
« Expérimentation par IRM et modélisation par éléments finis de la sédimentation-consolidation des vases ».
[Article de conférence]. Houille Blanche, vol. 94, nº 3.
pp. 39-44.
Vellasques, E., Oliveira, Luiz S., Britto, Alceu de Souza, Koerich, Alessandro L. et Sabourin, Robert.
2008.
« Filtering segmentation cuts for digit string recognition ».
Pattern Recognition, vol. 41, nº 10.
pp. 3044-3053.
Vo, P., Jahazi, M. et Yue, S..
2008.
« Recrystallization during thermomechanical processing of IMI834 ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 39, nº 12.
pp. 2965-2980.
Voix, Jérémie, Behar, Alberto et Wong, Willy.
2008.
« The ANSI standard S12. 68-2007 method of estimating effective a-weighted sound pressure levels when hearing protectors are worn: A canadian perspective ».
[Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 36, nº 3.
pp. 94-95.
Wagnac, Éric, Aubin, C. E. et Dansereau, J..
2008.
« A new method to generate a patient-specific finite element model of the human buttocks ».
IEEE Transactions on Biomedical Engineering , vol. 55, nº 2.
pp. 774-783.
Wang, C. M., Chao, C. C., Huang, H. I., Ung, B., Sheng, Y. et Chang, J. Y..
2008.
« Transmission enhancement through a metallic slit assisted by low scattering loss corrugations ».
Optics Communications, vol. 281, nº 10.
pp. 2996-2999.
Wang, X., Jahazi, M. et Yue, S..
2008.
« Investigation of α platelet boundaries in a near-α titanium alloy ».
Materials Science and Engineering: A, vol. 492, nº 1–2.
pp. 450-454.
Wang, Zhi, Parent, Stefan, Mac-Thiong, J. M., Petit, Yvan et Labelle, Hubert.
2008.
« Influence of sacral morphology in developmental spondylolisthesis ».
Spine, vol. 33, nº 20.
pp. 2185-2191.
Wanjara, P. et Jahazi, M..
2008.
« Characterization of electron beam welded 17-4 ph stainless steel ».
Canadian Metallurgical Quarterly, vol. 47, nº 4.
pp. 413-436.
Weis, Timothy M. et Ilinca, Adrian.
2008.
« The utility of energy storage to improve the economics of wind-diesel power plants in Canada ».
Renewable Energy, vol. 33, nº 7.
pp. 1544-1557.
Weis, Timothy M., Ilinca, Adrian et Pinard, Jean-Paul.
2008.
« Stakeholders' perspectives on barriers to remote wind-diesel power plants in Canada ».
Energy Policy, vol. 36, nº 5.
pp. 1611-1621.
Woodward, L., Perrier, M. et Srinivasan, B..
2008.
« Correction for non-identical units in multi-unit optimization ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 41, nº 2.
pp. 7931-7936.
Yang, Lijun J., Zmeureanu, Radu et Rivard, Hugues.
2008.
« Comparison of environmental impacts of two residential heating systems ».
Building and Environment, vol. 43, nº 6.
pp. 1072-1081.
Yeste-Ojeda, Omar A., Grajal, Jesus et Lopez-Risueño, Gustavo.
2008.
« Atomic decomposition for radar applications ».
IEEE Transactions on Aerospace and Electronic Systems, vol. 44, nº 1.
pp. 187-200.
Yu, Alexander, Bonev, Ilian A. et Zsombor-Murray, Paul.
2008.
« Geometric approach to the accuracy analysis of a class of 3-DOF planar parallel robots ».
Mechanism and Machine Theory, vol. 43, nº 3.
pp. 364-375.
Zabaiou, Tarik, Okou, Francis A., Dessaint, Louis- A. et Akhrif, Ouassima.
2008.
« Time-delay compensation of a wide-area measurements-based hierarchical voltage and speed regulator ».
Canadian Journal of Electrical and Computer Engineering = Revue Canadienne de Génie Électrique et Informatique, vol. 33, nº 2.
pp. 77-85.
Zeng, Jun, Liu, Zhaoheng et Champliaud, Henri.
2008.
« FEM dynamic simulation and analysis of the roll-bending process for forming a conical tube ».
Journal of Materials Processing Technology, vol. 198, nº 1-3.
pp. 330-343.
Zhang, Gaixia, Sun, Shuhui, Yang, Dequan, Dodelet, Jean-Pol et Sacher, Edward.
2008.
« The surface analytical characterization of carbon fibers functionalized by H2SO4/HNO3 treatment ».
Carbon, vol. 46, nº 2.
pp. 196-205.
Zhang, Gaixia, Zhao, Yue-Feng, Zhang, Yin-Chao et Zhao, Pei-Tao.
2008.
« Lidar system for monitoring planetary boundary layer aerosol in daytime ».
Wuli Xuebao = Acta Physica Sinica, vol. 57, nº 11.
pp. 7390-7395.
Zolghadri, Marc, Olivier, Claude et Bourrières, Jean-Paul.
2008.
« Close-optimal production and procurement policy for a X-network of added value using lexicographic linear goal programming ».
Computers and Industrial Engineering, vol. 54, nº 4.
pp. 821-839. |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau