ENGLISH
La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS
RECHERCHER

L'affiliation est "Génie mécanique"

Exporter en format [Atom feed] Atom [RSS feed] RSS 1.0 [RSS2 feed] RSS 2.0
Groupement par Professeur | Année | Type de document | Sans groupement
Nombre de documents archivés : 383.

Article publié dans une revue, révisé par les pairs

Aghasibeig, Maniya, Monajatizadeh, Hossein, Bocher, Philippe, Dolatabadi, Ali, Wuthrich, Rolf et Moreau, Christian. 2016. « Cold spray as a novel method for development of nickel electrode coatings for hydrogen production ». International Journal of Hydrogen Energy, vol. 41, nº 1. pp. 227-238.
Compte des citations dans Scopus : 13.

Ahmadabadi, Z. Nili, Laville, Frédéric et Guilbault, Raynald. 2016. « Time domain identification and ranking of noise sources in a pneumatic nail gun ». Applied Acoustics, vol. 114. pp. 191-202.
Compte des citations dans Scopus : 4.

Aidibe, Ali, Tahan, Antoine et Brailovski, Vladimir. 2016. « Metrological investigation of a selective laser melting additive manufacturing system: A case study ». [Article de conférence]. IFAC-PapersOnLine, vol. 49, nº 31. pp. 25-29.
Compte des citations dans Scopus : 12.

Al Sayed, Chady, Vinches, Ludwig et Hallé, Stéphane. 2016. « Towards optimizing a personal cooling garment for hot and humid deep mining conditions ». Open Journal of Optimization, vol. 5, nº 1. pp. 35-43.

Amrei, Mohsen Mokhtabad, Monajati, Hossein, Thibault, Denis, Verreman, Yves et Bocher, Philippe. 2016. « Effects of various post-weld heat treatments on austenite and carbide formation in a 13Cr4Ni steel multipass weld ». Metallography, Microstructure, and Analysis, vol. 5, nº 1. pp. 50-61.
Compte des citations dans Scopus : 10.

Amrei, Mohsen Mokhtabad, Monajati, Hossein, Thibault, Denis, Verreman, Yves, Germain, Lionel et Bocher, Philippe. 2016. « Microstructure characterization and hardness distribution of 13Cr4Ni multipass weld metal ». Materials Characterization, vol. 111. pp. 128-136.
Compte des citations dans Scopus : 33.

Amurin, Leice G., Carastan, Danilo J. et Demarquette, Nicole R.. 2016. « Morphological evolution of block copolymer nanocomposites submitted to extensional flows ». Journal of Rheology, vol. 60, nº 1. pp. 175-189.
Compte des citations dans Scopus : 10.

Anderson, M., Bridier, F., Gholipour, J., Jahazi, M., Wanjara, P., Bocher, P. et Savoie, J.. 2016. « Mechanical and metallurgical evolution of stainless steel 321 in a multi-step forming process ». Journal of Materials Engineering and Performance, vol. 25, nº 4. pp. 1526-1538.
Compte des citations dans Scopus : 4.

Attoui, Hocine, Bouzid, Abdel-Hakim et Waterland, Jerry A.. 2016. « On the buckling of spiral wound gaskets ». Journal of Pressure Vessel Technology, vol. 138, nº 4.
Compte des citations dans Scopus : 7.

Avoine, Xytilis, Lussier, Bertrand, Brailovski, Vladimir, Inaekyan, Karine et Beauchamp, Guy. 2016. « Evaluation of the effect of 4 types of knots on the mechanical properties of 4 types of suture material used in small animal practice ». Canadian Journal of Veterinary Research, vol. 80, nº 2. pp. 162-170.
Compte des citations dans Scopus : 12.

Badache, Messaoud, Eslami-Nejad, Parham, Ouzzane, Mohamed, Aidoun, Zine et Lamarche, Louis. 2016. « A new modeling approach for improved ground temperature profile determination ». Renewable Energy, vol. 85. pp. 436-444.
Compte des citations dans Scopus : 67.

Badiane, Abdoulaye, Nadeau, Sylvie, Kenné, Jean-Pierre et Polotski, Vladimir. 2016. « Optimizing production while reducing machinery lockout/tagout circumvention possibilities ». Journal of Quality in Maintenance Engineering, vol. 22, nº 2. pp. 188-201.
Compte des citations dans Scopus : 5.

Bagayoko, Moussa Sinsé, Ateme-Nguema, Barthélemy et Dao, Thien-My. 2016. « Vehicle routing problem using savings-insertion and reactive tabu with a variable threshold ». American Journal of Engineering Research, vol. 5, nº 12. pp. 110-118.

Bagayoko, Moussa Sinsé, Dao, Thien-My et Ateme-Nguema, Barthélemy. 2016. « Multi-objective forest vehicle routing using savings-insertion and reactive tabu with a variable threshold ». International Journal of Engineering Research and Applications, vol. 6, nº 12. pp. 56-64.

Beardsell, Guillaume, Dufresne, Louis et Dumas, Guy. 2016. « Investigation of the viscous reconnection phenomenon of two vortex tubes through spectral simulations ». Physics of Fluids, vol. 28, nº 9.
Compte des citations dans Scopus : 14.

Belanger, Pierre et Boivin, Guillaume. 2016. « Development of a low frequency omnidirectional piezoelectric shear horizontal wave transducer ». Smart Materials and Structures, vol. 25, nº 4.
Compte des citations dans Scopus : 49.

Belzile, Patrick, Lamarche, Louis et Rousse, Daniel R.. 2016. « Geothermal heat exchange in boreholes with independent sources ». Applied Thermal Engineering, vol. 98. pp. 1221-1230.
Compte des citations dans Scopus : 14.

Belzile, Patrick, Lamarche, Louis et Rousse, Daniel R.. 2016. « Semi-analytical model for geothermal borefields with independent inlet conditions ». Geothermics, vol. 60. pp. 144-155.
Compte des citations dans Scopus : 14.

Ben Mosbah, A., Botez, R. M. et Dao, T.-M.. 2016. « New methodology combining neural network and extended great deluge algorithms for the ATR-42 wing aerodynamics analysis ». Aeronautical Journal, vol. 120, nº 1229. pp. 1049-1080.
Compte des citations dans Scopus : 5.

Ben Mosbah, Abdallah, Botez, Ruxandra Mihaela et Dao, Thien My. 2016. « A hybrid original approach for prediction of the aerodynamic coefficients of an ATR-42 scaled wing model ». Chinese Journal of Aeronautics, vol. 29, nº 1. pp. 41-52.
Compte des citations dans Scopus : 10.

Ben Salah, Mehdi, Hallé, Stéphane et Tuduri, Ludovic. 2016. « Efficiency of five chemical protective clothing materials against nano and submicron aerosols when submitted to mechanical deformations ». Journal of Occupational and Environmental Hygiene, vol. 13, nº 6. pp. 425-433.
Compte des citations dans Scopus : 9.

Benacchio, Simon, Varoquaux, Arthur, Wagnac, Éric, Doutres, Olivier, Callot, Virginie, Bendahan, David et Sgard, Franck. 2016. « Ear canal deformations by various earplugs: An in situ investigation using MRI ». [Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 44, nº 3. pp. 158-159.
Compte des citations dans Scopus : 2.

Berdai, Mounia, Tahan, Antoine et Gagnon, Martin. 2016. « Imprecise probabilities in fatigue reliability assessment of hydraulic turbines ». ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, vol. 3, nº 1.
Compte des citations dans Scopus : 7.

Bernier, Antoine, Herzog, Philippe et Voix, Jérémie. 2016. « Comment on two-port network analysis and modeling of a balanced armature receiver ». Hearing Research, vol. 339. pp. 213-214.
Compte des citations dans Scopus : 1.

Bianco, Rohan-Jean, Aubin, Carl-Éric, Mac-Thiong, Jean-Marc, Wagnac, Eric et Arnoux, Pierre-Jean. 2016. « Pedicle screw fixation under nonaxial loads: a cadaveric study ». Spine, vol. 41, nº 3. E124-E130.
Compte des citations dans Scopus : 17.

Bisson, J., Seers, P., Huegel, M. et Garnier, F.. 2016. « Numerical prediction of gaseous aerosol precursors and particles in an aircraft engine ». Journal of Propulsion and Power, vol. 32, nº 4. pp. 918-928.
Compte des citations dans Scopus : 5.

Bitterlin, Matthieu, Loucif, Abdelhalim, Charbonnier, Nicolas, Jahazi, Mohammad, Lapierre-Boire, Louis-Philippe et Morin, Jean-Benoît. 2016. « Cracking mechanisms in large size ingots of high nickel content low alloyed steel ». Engineering Failure Analysis, vol. 68. pp. 122-131.
Compte des citations dans Scopus : 21.

Boivin, Guillaume, Tremblay, Nicolas, Zednik, Ricardo et Bélanger, Pierre. 2016. « Piezoelectric low frequency shear horizontal guided wave transduction ». [Résumé d'une communication à une conférence]. The Journal of the Acoustical Society of America, vol. 140, nº 4. p. 3034.

Bonnet, Fabien, Voix, Jérémie et Nélisse, Hugues. 2016. « Effect of ear canal occlusion on loudness perception ». [Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 44, nº 3. pp. 154-155.
Compte des citations dans Scopus : 3.

Bouserhal, Rachel, MacDonald, Ewen, Falk, Tiago et Voix, Jérémie. 2016. « Variations in voice level and fundamental frequency with changing background noise level and talker-to-listener distance while wearing hearing protectors: a pilot study ». International Journal of Audiology, vol. 55, nº supp. 1. S13-S20.
Compte des citations dans Scopus : 8.

Bouzid, Abdel-Hakim et Kazeminia, Mehdi. 2016. « Effect of reverse yielding on the residual contact pressure in tube-to-tubesheet joints ». Journal of Pressure Vessel Technology, vol. 138, nº 6.
Compte des citations dans Scopus : 11.

Bouzid, Abdel-Hakim et Laghzale, Nor-Eddine. 2016. « Analytical modeling of tube-to-tubesheet joints subjected to plastic deformation and creep ». Journal of Advanced Mechanical Design, Systems and Manufacturing, vol. 10, nº 4.
Compte des citations dans Scopus : 5.

Bouzid, Abdel-Hakim, Mourad, Abdel-Hamid I. et El Domiaty, Aly. 2016. « Influence of Bauschinger effect on the residual contact pressure of hydraulically expanded tube-to-tubesheet joints ». International Journal of Pressure Vessels and Piping, vol. 146. pp. 1-10.
Compte des citations dans Scopus : 15.

Brailovski, Vladimir, Facchinello, Yann, Brummund, Martin, Petit, Yvan et Mac-Thiong, Jean-Marc. 2016. « Ti–Ni rods with variable stiffness for spine stabilization: Manufacture and biomechanical evaluation ». Shape Memory and Superelasticity, vol. 2, nº 1. pp. 3-11.
Compte des citations dans Scopus : 8.

Brulatout, Jonathan, Garnier, François, Mounaïm-Rousselle, Christine et Seers, Patrice. 2016. « Calibration strategy of diesel-fuel spray atomization models using a design of experiment method ». International Journal of Engine Research, vol. 17, nº 7. pp. 713-731.
Compte des citations dans Scopus : 14.

Cambron, P., Lepvrier, R., Masson, C., Tahan, A. et Pelletier, F.. 2016. « Power curve monitoring using weighted moving average control charts ». Renewable Energy, vol. 94. pp. 126-135.
Compte des citations dans Scopus : 46.

Carioli, Johan, Delnavaz, Aidin, Zednik, Ricardo J. et Voix, Jérémie. 2016. « Power capacity from earcanal dynamic motion ». AIP Advances, vol. 6, nº 12.
Compte des citations dans Scopus : 8.

Chadha, K., Shahriari, D. et Jahazi, M.. 2016. « Constitutive modelling of ingot breakdown process of low alloy steels ». Metallurgia Italiana, vol. 108, nº 4. pp. 5-12.
Compte des citations dans Scopus : 14.

Corriveau, Guillaume, Guilbault, Raynald, Tahan, Antoine et Sabourin, Robert. 2016. « Bayesian network as an adaptive parameter setting approach for genetic algorithms ». Complex & Intelligent Systems, vol. 2, nº 1. pp. 1-22.

Couderc, Hugues, Fréchette, Michel, David, Éric, Savoie, Sylvio, Guastavino, Francesco, Thelakkaday, Abdul Salam, Coletti, Gianfranco et Fina, Alberto. 2016. « Dielectric properties of epoxy/montmorillonite nanocomposites and nanostructured epoxy/SiO2/Montmorillonite Microcomposites ». Polymer Composites, vol. 37, nº 1. pp. 115-124.
Compte des citations dans Scopus : 4.

Crétois, Raphael, Chenal, Jean-Marc, Sheibat-Othman, Nida, Monnier, Alexandre, Martin, Clélia, Astruz, Olivier, Kurusu, Rafael et Demarquette, Nicole R.. 2016. « Physical explanations about the improvement of PolyHydroxyButyrate ductility: Hidden effect of plasticizer on physical ageing ». Polymer, vol. 102. pp. 176-182.
Compte des citations dans Scopus : 23.

Demers, Sébastien, Bouzid, Abdel-Hakim et Nadeau, Sylvie. 2016. « Effect of Sharpey's fibers on the stress distribution in the anulus fibrosus of an intervertebral disc subjected to compression ». International Review on Modelling and Simulations, vol. 9, nº 6. pp. 414-426.
Compte des citations dans Scopus : 1.

Demers, Sébastien, Nadeau, Sylvie et Bouzid, Abdel-Hakim. 2016. « Anisotropic multishell analytical modeling of an intervertebral disk subjected to axial compression ». Journal of Biomechanical Engineering, vol. 138, nº 4.
Compte des citations dans Scopus : 1.

Dubinskiy, Sergey, Korotitskiy, Andrey, Prokoshkin, Sergey et Brailovski, Vladimir. 2016. « In situ X-ray diffraction study of athermal and isothermal omega-phase crystal lattice in Ti-Nb-based shape memory alloys ». Materials Letters, vol. 168. pp. 155-157.
Compte des citations dans Scopus : 28.

Dubot, F., Favennec, Y., Rousseau, B., Jarny, Y. et Rousse, Daniel R.. 2016. « Quasi-optimal Tikhonov penalization and parameterization coarseness in space-dependent function estimation ». Inverse Problems in Science and Engineering, vol. 24, nº 3. pp. 465-481.
Compte des citations dans Scopus : 3.

Dugnani, Roberto et Zednik, Ricardo J.. 2016. « Geometric description of fracture surface features in isotropic brittle solids ». Engineering Fracture Mechanics, vol. 165. pp. 87-97.
Compte des citations dans Scopus : 8.

El Asli, Neila, Dao, Thien-My et Abou, Séraphin. 2016. « Extended great deluge approach for the integrated dynamic berth allocation and crane assignment problem ». International Journal of Advanced Engineering Research and Applications, vol. 2, nº 5. pp. 270-292.

Elhadi, A., Bouchoucha, A., Jomaa, W., Zedan, Y., Schmitt, T. et Bocher, P.. 2016. « Study of surface wear and damage induced by dry sliding of tempered AISI 4140 steel against hardened AISI 1055 steel ». Tribology in Industry, vol. 38, nº 4. pp. 475-485.
Compte des citations dans Scopus : 9.

Emami-Mehrgani, Berhnam, Neumann, Patrick W., Nadeau, Sylvie et Bazrafshan, Majid. 2016. « Considering human error in optimizing production and corrective and preventive maintenance policies for manufacturing systems ». Applied Mathematical Modelling, vol. 40, nº 3. pp. 2056-2074.
Compte des citations dans Scopus : 28.

Fakorede, Oloufemi, Feger, Zoe, Ibrahim, Hussein, Ilinca, Adrian, Perron, Jean et Masson, Christian. 2016. « Ice protection systems for wind turbines in cold climate: characteristics, comparisons and analysis ». Renewable and Sustainable Energy Reviews, vol. 65. pp. 662-675.
Compte des citations dans Scopus : 158.

Fall, Ameth, Fesharaki, Mostafa Hashemi, Khodabandeh, Ali Reza et Jahazi, Mohammad. 2016. « Tool wear characteristics and effect on microstructure in Ti-6Al-4V friction stir welded joints ». Metals, vol. 6, nº 11. pp. 275-286.
Compte des citations dans Scopus : 46.

Farahani, Rouhollah D., Dubé, Martine et Therriault, Daniel. 2016. « Three-dimensional printing of multifunctional nanocomposites: manufacturing techniques and applications ». Advanced Materials, vol. 28, nº 28. pp. 5794-5821.
Compte des citations dans Scopus : 475.

Fareh, Fouad, Demers, Vincent, Demarquette, Nicole R., Turenne, Sylvain et Scalzo, Orlando. 2016. « Molding properties of Inconel 718 feedstocks used in low-pressure powder injection molding ». Advances in Materials Science and Engineering, vol. 2016.
Compte des citations dans Scopus : 10.

Fatimi, Ahmed, Zehtabi, Fatemeh et Lerouge, Sophie. 2016. « Optimization and characterization of injectable chitosan-iodixanol-based hydrogels for the embolization of blood vessels ». Journal of Biomedical Materials Research - Part B Applied Biomaterials, vol. 104, nº 8. pp. 1551-1562.
Compte des citations dans Scopus : 18.

Favennec, Y., Dubot, F., Le Hardy, D., Rousseau, B. et Rousse, D. R.. 2016. « Space-dependent sobolev gradients as a regularization for inverse radiative transfer problems ». Mathematical Problems in Engineering, vol. 2016.
Compte des citations dans Scopus : 4.

Fournier, Sébastien, Simon, Guillaume et Seers, Patrice. 2016. « Evaluation of low concentrations of ethanol, butanol, BE, and ABE blended with gasoline in a direct-injection, spark-ignition engine ». Fuel, vol. 181. pp. 396-407.
Compte des citations dans Scopus : 42.

Fradet, Leo, Arnoux, Pierre-Jean, Callot, Virginie et Petit, Yvan. 2016. « Geometrical variations in white and gray matter affect the biomechanics of spinal cord injuries more than the arachnoid space ». Advances in Mechanical Engineering, vol. 8, nº 8.
Compte des citations dans Scopus : 14.

Fradet, Leo, Cliche, Francis, Petit, Yvan, Mac-Thiong, Jean-Marc et Arnoux, Pierre-Jean. 2016. « Strain rate dependent behavior of the porcine spinal cord under transverse dynamic compression ». Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol. 230, nº 9. pp. 858-866.
Compte des citations dans Scopus : 14.

Gaudreau, Marc-André, Laville, Frédéric, Marcotte, Pierre et Boutin, Jérôme. 2016. « Laboratory and field measurements of nail guns' noise emission ». [Article de conférence]. Canadian Acoustics - Acoustique Canadienne, vol. 44, nº 3. pp. 250-251.
Compte des citations dans Scopus : 1.

Gendron, Mathieu, Boudreault, Éric, Hazel, Bruce, Pham, Xuan-Tan et Champliaud, Henri. 2016. « Non-linear optimization of a new robotic induction process for local heat treatment using thermal finite element analysis ». International Journal of Advanced Manufacturing Technology, vol. 84, nº 5. pp. 1013-1029.
Compte des citations dans Scopus : 4.

Ghafarizadeh, Seyedbehzad, Chatelain, Jean-François et Lebrun, Gilbert. 2016. « Effect of cutting tool lead angle on machining forces and surface finish of CFRP laminates ». Science and Engineering of Composite Materials, vol. 23, nº 5. pp. 543-550.
Compte des citations dans Scopus : 3.

Ghafarizadeh, Seyedbehzad, Chatelain, Jean-François et Lebrun, Gilbert. 2016. « Finite element analysis of surface milling of carbon fiber-reinforced composites ». International Journal of Advanced Manufacturing Technology, vol. 87, nº 1. pp. 399-409.
Compte des citations dans Scopus : 58.

Ghafarizadeh, Seyedbehzad, Lebrun, Gilbert et Chatelain, Jean-François. 2016. « Experimental investigation of the cutting temperature and surface quality during milling of unidirectional carbon fiber reinforced plastic ». Journal of Composite Materials, vol. 50, nº 8. pp. 1059-1071.
Compte des citations dans Scopus : 53.

Ghasemi-Nanesa, Hadi, Touazine, Heithem et Jahazi, Mohammad. 2016. « Influence of cryogenic process parameters on microstructure and hardness evolution of AISI D2 tool steel ». International Journal of Advanced Manufacturing Technology, vol. 85, nº 1. pp. 881-890.
Compte des citations dans Scopus : 15.

Gholami, Mohammad Sadegh, Doutres, Olivier et Atalla, Noureddine. 2016. « Effect of variability in micro-geometry of polyurethane foams on the double wall transmission loss ». [Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 44, nº 3. pp. 178-179.

Giraud, Landry, Robe, Hugo, Claudin, Christophe, Desrayaud, Christophe, Bocher, Philippe et Feulvarch, Eric. 2016. « Investigation into the dissimilar friction stir welding of AA7020-T651 and AA6060-T6 ». Journal of Materials Processing Technology, vol. 235. pp. 220-230.
Compte des citations dans Scopus : 62.

Gouin O'Shaughnessey, Patrice, Dubé, Martine et Fernandez Villegas, Irene. 2016. « Modeling and experimental investigation of induction welding of thermoplastic composites and comparison with other welding processes ». Journal of Composite Materials, vol. 50, nº 21. pp. 2895-2910.
Compte des citations dans Scopus : 52.

Grewal, Rupanjit, Aranas, Clodualdo, Chadha, Kanwal, Shahriari, Davood, Jahazi, Mohammad et Jonas, John J.. 2016. « Formation of Widmanstatten ferrite at very high temperatures in the austenite phase field ». Acta Materialia, vol. 109. pp. 23-31.
Compte des citations dans Scopus : 51.

Guilbault, Raynald et Lalonde, Sébastien. 2016. « Early diagnostic of concurrent gear degradation processes progressing under time-varying loads ». Mechanical Systems and Signal Processing, vol. 76-77. pp. 337-352.
Compte des citations dans Scopus : 5.

Gupta, Shreyank, Haïat, Guillaume, Laporte, Catherine et Bélanger, Pierre. 2016. « Modeling wave propagation through the skull for ultrasonic transcranial Doppler ». [Résumé d'une communication à une conférence]. Journal of the Acoustical Society of America, vol. 140, nº 4. p. 3189.

Hallé, Stéphane et Vinches, Ludwing. 2016. « Confort thermique en milieux extrêmes : vers la conception de systèmes de refroidissement individuels efficaces ». Bulletin de veille scientifique - Anses, nº 28. pp. 87-90.

Heid, Thomas, Fréchette, Michel et David, Eric. 2016. « Enhanced electrical and thermal performances of nanostructured epoxy/POSS composites ». IEEE Transactions on Dielectrics and Electrical Insulation, vol. 23, nº 3. pp. 1732-1742.
Compte des citations dans Scopus : 38.

Jamin, Thibault, Dubé, Martine et Laberge Lebel, Louis. 2016. « Effect of stamp-forming parameters and bend radius on the mechanical performance of curved beam carbon fiber/polyphenylene sulfide specimens ». Journal of Composite Materials, vol. 50, nº 9. pp. 1213-1225.
Compte des citations dans Scopus : 6.

Jomaa, W., Songmene, V. et Bocher, P.. 2016. « An investigation of machining-induced residual stresses and microstructure of induction-hardened AISI 4340 steel ». Materials and Manufacturing Processes, vol. 31, nº 7. pp. 838-844.
Compte des citations dans Scopus : 58.

Jomaa, Walid, Songmene, Victor et Bocher, Philippe. 2016. « An hybrid approach based on machining and dynamic tests data for the identification of material constitutive equations ». Journal of Materials Engineering and Performance, vol. 25, nº 3. pp. 1010-1027.
Compte des citations dans Scopus : 9.

Karganroudi, Sasan Sattarpanah, Cuillière, Jean-Christophe, Francois, Vincent et Tahan, Souheil-Antoine. 2016. « Automatic fixtureless inspection of non-rigid parts based on filtering registration points ». International Journal of Advanced Manufacturing Technology, vol. 87, nº 1. pp. 687-712.
Compte des citations dans Scopus : 15.

Kedadouche, M., Thomas, M. et Tahan, A.. 2016. « A comparative study between empirical wavelet transforms and empirical mode decomposition methods: application to bearing defect diagnosis ». Mechanical Systems and Signal Processing, vol. 81. pp. 88-107.
Compte des citations dans Scopus : 252.

Kedadouche, Mourad, Liu, Zhaoheng et Vu, Viet-Hung. 2016. « A new approach based on OMA-empirical wavelet transforms for bearing fault diagnosis ». Measurement: Journal of the International Measurement Confederation, vol. 90. pp. 292-308.
Compte des citations dans Scopus : 67.

Kibouka, Guy-Richard, Nganga-Kouya, Donatien, Kenne, Jean-Pierre, Songmene, Victor et Polotski, Vladimir. 2016. « Production planning of a failure-prone manufacturing system under different setup scenarios ». Journal of Applied Mathematics, vol. 2016.
Compte des citations dans Scopus : 2.

Kuester, Scheyla, Barra, Guilherme M. O., Ferreira, José Carlos, Soares, Bluma G. et Demarquette, Nicole R.. 2016. « Electromagnetic interference shielding and electrical properties of nanocomposites based on poly (styrene-b-ethylene-ran-butylene-b-styrene) and carbon nanotubes ». European Polymer Journal, vol. 77. pp. 43-53.
Compte des citations dans Scopus : 62.

Kurusu Salles, Rafael et Demarquette, Nicole Raymonde. 2016. « Wetting of hydrophilic electrospun mats produced by blending SEBS with PEO-PPO-PEO copolymers of different molecular weight ». Langmuir, vol. 32, nº 7. pp. 1846-1853.
Compte des citations dans Scopus : 22.

Laghzale, Noreddine et Bouzid, Hakim. 2016. « Analytical modelling of elastic-plastic interference fit joints ». International Review on Modelling and Simulations, vol. 9, nº 3. pp. 191-199.
Compte des citations dans Scopus : 17.

Landry, Jonathan, Soulaïmani, Azzeddine, Luke, Edward et Ben Haj Ali, Amine. 2016. « Robust moving mesh algorithms for hybrid stretched meshes: application to moving boundaries problems ». Journal of Computational Physics, vol. 326. pp. 691-721.
Compte des citations dans Scopus : 2.

Lépine, Marc Jr. et Tahan, Antoine S.. 2016. « The relationship between geometrical complexity and process capability ». Journal of Manufacturing Science and Engineering, vol. 138, nº 5.
Compte des citations dans Scopus : 4.

Lequoy, Pauline, Murschel, Frederic, Liberelle, Benoit, Lerouge, Sophie et De Crescenzo, Gregory. 2016. « Controlled co-immobilization of EGF and VEGF to optimize vascular cell survival ». Acta Biomaterialia, vol. 29. pp. 239-247.
Compte des citations dans Scopus : 29.

Lequoy, Pauline, Savoji, Houman, Saoudi, Bachir, Bertrand-Grenier, Antony, Wertheimer, Michael R., De Crescenzo, Gregory, Soulez, Gilles et Lerouge, Sophie. 2016. « In vitro and pilot in vivo evaluation of a bioactive coating for stent grafts based on chondroitin sulfate and epidermal growth factor ». Journal of Vascular and Interventional Radiology, vol. 27, nº 5. 753-760.e753.
Compte des citations dans Scopus : 9.

Lezzoum, Narimene, Gagnon, Ghyslain et Voix, Jérémie. 2016. « Echo threshold between passive and electro-acoustic transmission paths in digital hearing protection devices ». International Journal of Industrial Ergonomics, vol. 53. pp. 372-379.
Compte des citations dans Scopus : 8.

Lezzoum, Narimene, Gagnon, Ghyslain et Voix, Jérémie. 2016. « Noise reduction of speech signals using time-varying and multi-band adaptive gain control for smart digital hearing protectors ». Applied Acoustics, vol. 109. pp. 37-43.
Compte des citations dans Scopus : 9.

Liu, Zhaoheng, Hu, Kun et Chung, Kwok-Wai. 2016. « Nonlinear analysis of a closed-loop tractor-semitrailer vehicle system with time delay ». Mechanical Systems and Signal Processing, vol. 76-77. pp. 696-711.
Compte des citations dans Scopus : 18.

Lortie, Monique, Nadeau, Sylvie et Vezeau, Steve. 2016. « Holistic sustainable development: Floor-layers and micro-enterprises ». Applied Ergonomics, vol. 57. pp. 8-16.
Compte des citations dans Scopus : 11.

Luk-Cyr, Jacques, El-Bawab, Rayan, Lanteigne, Jacques, Champliaud, Henri et Vadean, Aurelian. 2016. « Mechanical properties of 75% Ar /25% CO2 flux-cored arc welded E309L austenitic stainless steel ». Materials Science and Engineering A, vol. 678. pp. 197-203.
Compte des citations dans Scopus : 6.

Mac-Thiong, Jean-Marc, Levasseur, Annie, Parent, Stefan et Petit, Yvan. 2016. « Experimental model of proximal junctional fracture after multilevel posterior spinal instrumentation ». Biomed Research International, vol. 2016.
Compte des citations dans Scopus : 1.

Mandatsy Moungomo, J. B., Nganga-Kouya, D., Songmene, V., Kouam, J. et Kenné, J. P.. 2016. « Machinability study of recycled aluminum cans and machining chips ». International Journal of Advanced Manufacturing Technology, vol. 87, nº 9. pp. 2551-2566.
Compte des citations dans Scopus : 12.

Masoumi, F., Jahazi, M., Shahriari, D. et Cormier, J.. 2016. « Coarsening and dissolution of γ′ precipitates during solution treatment of AD730™ Ni-based superalloy: Mechanisms and kinetics models ». Journal of Alloys and Compounds, vol. 658. pp. 981-995.
Compte des citations dans Scopus : 142.

Masoumi, F., Shahriari, D., Jahazi, M., Cormier, J. et Devaux, A.. 2016. « Kinetics and mechanisms of γ′ reprecipitation in a Ni-based superalloy ». Scientific Reports, vol. 6.
Compte des citations dans Scopus : 83.

Mirakhorli, Fatemeh, Cao, Xinjin, Pham, Xuan-Tan, Wanjara, Priti et Fihey, Jean-Luc. 2016. « Hybrid laser-arc welding of 10-mm-thick cast martensitic stainless steel CA6NM: as-welded microstructure and mechanical properties ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 47, nº 7. pp. 3545-3563.
Compte des citations dans Scopus : 10.

Mirakhorli, Fatemeh, Cao, Xinjin, Pham, Xuan-Tan, Wanjara, Priti et Fihey, Jean-Luc. 2016. « Post-weld tempered microstructure and mechanical properties of hybrid laser-arc welded cast martensitic stainless steel CA6NM ». Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 47, nº 6. pp. 3245-3256.
Compte des citations dans Scopus : 10.

Mohammed-Taifour, Abdelouahab et Weiss, Julien. 2016. « Unsteadiness in a large turbulent separation bubble ». Journal of Fluid Mechanics, vol. 799. pp. 383-412.
Compte des citations dans Scopus : 72.

Monette, Anne, Ceccaldi, Caroline, Assaad, Elias, Lerouge, Sophie et Lapointe, Réjean. 2016. « Chitosan thermogels for local expansion and delivery of tumor-specific T lymphocytes towards enhanced cancer immunotherapies ». Biomaterials, vol. 75. pp. 237-249.
Compte des citations dans Scopus : 104.

Morency, François et Beaugendre, Héloïse. 2016. « Mathematical model for ice wall interactions within a level set method ». International Journal of Engineering Systems Modelling and Simulation, vol. 8, nº 2. pp. 125-135.
Compte des citations dans Scopus : 2.

Mosbah, Abdallah Ben, Botez, Ruxandra Mihaela, Dao, Thien My, Guezguez, Mohamed Sadok et Zaag, Mahdi. 2016. « A neural network controller new methodology for the ATR-42 morphing wing actuation ». INCAS Bulletin, vol. 8, nº 2. pp. 59-75.

Mroue, Hassan et Dao, Thien-My. 2016. « A time-cost heuristic algorithm for routing the parts in a flexible manufacturing system ». International Journal of Applied Engineering Research, vol. 11, nº 6. pp. 4053-4058.

Nadeau, Sylvie, Kenné, Jean-Pierre, Emami-Mehrgani, Behnam et Badri, Adel. 2016. « Advances in integration of equipment lockout/tagout, determination of actual production capacity and production/maintenance planning ». Safety Science Monitor, vol. 19, nº 2.

Nadon, Vincent, Bockstael, Annelies, Botteldooren, Dick et Voix, Jérémie. 2016. « Pilot study on individual dose-response relationship evaluated through otoacoustic emission measurements in controlled noise exposure: influence of circadian rhythm ». [Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 44, nº 3. pp. 162-163.

Nanesa, Hadi Ghasemi, Boulgakoff, Julien et Jahazi, Mohammad. 2016. « Influence of prior cold deformation on microstructure evolution of AISI D2 tool steel after hardening heat treatment ». Journal of Manufacturing Processes, vol. 22. pp. 115-119.
Compte des citations dans Scopus : 23.

Niknam, Seyed Ali, Kouam, Jules et Songmene, Victor. 2016. « Experimental investigation on part quality and metallic particle emission when milling 6061-T6 aluminium alloy ». International Journal of Machining and Machinability of Materials, vol. 18, nº 1-2. pp. 120-137.
Compte des citations dans Scopus : 12.

Nisol, Bernard, Gagnon, Hervé, Lerouge, Sophie et Wertheimer, Michael R.. 2016. « Energy of reactions in atmospheric-pressure plasma polymerization with inert carrier gas ». Plasma Processes and Polymers, vol. 13, nº 3. pp. 366-374.
Compte des citations dans Scopus : 26.

Nisol, Bernard, Watson, Sean, Lerouge, Sophie et Wertheimer, Michael R.. 2016. « Energetics of reactions in a dielectric barrier discharge with argon carrier gas: III Esters ». Plasma Processes and Polymers, vol. 13, nº 9. pp. 900-907.
Compte des citations dans Scopus : 18.

Nisol, Bernard, Watson, Sean, Lerouge, Sophie et Wertheimer, Michael R.. 2016. « Energetics of reactions in a dielectric barrier discharge with argon carrier gas: IV ethyl lactate ». Plasma Processes and Polymers, vol. 13, nº 10. pp. 965-969.
Compte des citations dans Scopus : 14.

Novelli, Marc, Fundenberger, Jean-Jacques, Bocher, Philippe et Grosdidier, Thierry. 2016. « On the effectiveness of surface severe plastic deformation by shot peening at cryogenic temperature ». Applied Surface Science, vol. 389. pp. 1169-1174.
Compte des citations dans Scopus : 51.

Padois, Thomas, Doutres, Olivier, Sgard, Franck et Berry, Alain. 2016. « On the use of geometric and harmonic means with the generalized cross-correlation in the time domain to improve noise source maps ». Journal of the Acoustical Society of America, vol. 140, nº 1.
Compte des citations dans Scopus : 15.

Padois, Thomas, Doutres, Olivier, Sgard, Franck et Berry, Alain. 2016. « Time domain source localization technique based on generalized cross correlation and generalized mean ». [Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 44, nº 3. pp. 60-61.
Compte des citations dans Scopus : 1.

Pelletier, Francis, Masson, Christian et Tahan, Antoine. 2016. « Wind turbine power curve modelling using artificial neural network ». Renewable Energy, vol. 89. pp. 207-214.
Compte des citations dans Scopus : 162.

Pelletingeas, Alexandre, Dufresne, Louis et Seers, Patrice. 2016. « Characterization of flow structures in a diesel injector for different needle lifts and a fluctuating injection pressure ». Journal of Fluids Engineering, vol. 138, nº 8. 081105-081105.
Compte des citations dans Scopus : 14.

Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali. 2016. « Production policy optimization in flexible manufacturing-remanufacturing systems ». [Article de conférence]. IFAC - Papers Online, vol. 49, nº 12. pp. 295-300.
Compte des citations dans Scopus : 3.

Pourian, Meysam H., Bridier, Florent, Pilvin, Philippe et Bocher, Philippe. 2016. « Prediction of crack initiation sites in alpha Ti-alloys microstructures under dwell-fatigue using Cellular Automaton simulation method ». International Journal of Fatigue, vol. 85. pp. 85-97.
Compte des citations dans Scopus : 25.

Prokoshkin, S., Brailovski, V., Dubinskiy, S., Inaekyan, K. et Kreitcberg, A.. 2016. « Gradation of nanostructures in cold-rolled and annealed Ti–Ni shape memory alloys ». Shape Memory and Superelasticity, vol. 2, nº 1. pp. 12-17.
Compte des citations dans Scopus : 34.

Prokoshkin, S., Brailovski, V., Dubinskiy, S., Zhukova, Y., Sheremetyev, V., Konopatsky, A. et Inaekyan, K.. 2016. « Manufacturing, structure control, and functional testing of Ti–Nb-Based SMA for medical application ». Shape Memory and Superelasticity, vol. 2, nº 2. pp. 130-144.
Compte des citations dans Scopus : 33.

Raymond, J., Lamarche, L. et Malo, M.. 2016. « Extending thermal response test assessments with inverse numerical modeling of temperature profiles measured in ground heat exchangers ». Renewable Energy, vol. 99. pp. 614-621.
Compte des citations dans Scopus : 22.

Rehman, Hafiz Laiq-Ur, Weiss, Julien et Seers, Patrice. 2016. « Effect of heat conduction on droplet life time and evaporation rate under forced convection at low temperatures ». Experimental Thermal and Fluid Science, vol. 72. pp. 59-66.
Compte des citations dans Scopus : 30.

Rimpault, X., Chatelain, J. F., Klemberg-Sapieha, J. E. et Balazinski, M.. 2016. « Surface profile texture characterization of trimmed laminated composite in the stacking sequence direction ». Measurement, vol. 91. pp. 84-92.
Compte des citations dans Scopus : 4.

Rivard, J., Brailovski, V., Ferlatte, A., Petit, Yvan et Mac-Thiong, J. M.. 2016. « New methodology for comparative evaluation of the abrasive properties of orthopedic cables, cut-out reciprocal testing (CORT) ». Experimental techniques, vol. 40, nº 1. pp. 35-42.

Robin, Olivier, Amedin, Celse Kafui, Berry, Alain, Atalla, Noureddine, Doutres, Olivier et Sgard, Franck. 2016. « A numerical study of a method for estimating sound absorption coefficient under a synthesized diffuse acoustic field ». [Article de conférence]. SAE International Journal of Passenger Cars - Mechanical Systems, vol. 9, nº 3.

Rochon, François et Voix, Jérémie. 2016. « Design and validation of a bone conduction music playback for bike helmet ». Canadian Acoustics = Acoustique Canadienne, vol. 44, nº 1. pp. 9-15.
Compte des citations dans Scopus : 1.

Roy, David, Lerouge, Sophie, Inaekyan, Karina, Kauffmann, Claude, Mongrain, Rosaire et Soulez, Gilles. 2016. « Experimental validation of more realistic computer models for stent-graft repair of abdominal aortic aneurysms, including pre-load assessment ». International Journal for Numerical Methods in Biomedical Engineering, vol. 32, nº 12.
Compte des citations dans Scopus : 19.

Saboori, M., Champliaud, H., Gholipour, J., Gakwaya, A., Savoie, J. et Wanjara, P.. 2016. « Extension of flow stress-strain curves of aerospace alloys after necking ». International Journal of Advanced Manufacturing Technology, vol. 83, nº 1-4. pp. 313-323.
Compte des citations dans Scopus : 16.

Saboori, M., Gholipour, J., Champliaud, H., Wanjara, P., Gakwaya, A. et Savoie, J.. 2016. « Prediction of burst pressure in multistage tube hydroforming of aerospace alloys ». Journal of Engineering for Gas Turbines and Power, vol. 138, nº 8.
Compte des citations dans Scopus : 5.

Sabri, V., Tahan, S. A., Pham, X. T., Moreau, D. et Galibois, S.. 2016. « Fixtureless profile inspection of non-rigid parts using the numerical inspection fixture with improved definition of displacement boundary conditions ». International Journal of Advanced Manufacturing Technology, vol. 82, nº 5-8. pp. 1343-1352.
Compte des citations dans Scopus : 17.

Sakouhi, Amine et Nadeau, Sylvie. 2016. « Integration of occupational health and safety into lean manufacturing: Quebec aeronautics case study ». American Journal of Industrial and Business Management, vol. 6, nº 11. pp. 1019-1031.

Salari, Emad, Jahazi, Mohammad, Khodabandeh, Alireza et Nanesa, Hadi Ghasemi. 2016. « Friction stir lap welding of 5456 aluminum alloy with different sheet thickness: process optimization and microstructure evolution ». International Journal of Advanced Manufacturing Technology, vol. 82, nº 1-4. pp. 39-48.
Compte des citations dans Scopus : 16.

Salem, Jamel, Champliaud, Henri, Feng, Zhengkun et Dao, Thien-My. 2016. « Experimental analysis of an asymmetrical three-roll bending process ». International Journal of Advanced Manufacturing Technology, vol. 83, nº 9. pp. 1823-1833.
Compte des citations dans Scopus : 22.

Salloum, Eli, Bertrand-Grenier, Antony, Lerouge, Antony, Kauffman, Claude, Héon, Hélène, Therasse, Eric, Salazkin, Igor, Roy Cardinal, Marie-Hélène, Cloutier, Guy et Soulez, Gilles. 2016. « Endovascular repair of abdominal aortic aneurysm: follow-up with noninvasive vascular elastography in a canine model ». Radiology, vol. 279, nº 2.
Compte des citations dans Scopus : 5.

Sandman, Emilie, Canet, Fanny, Petit, Yvan, Laflamme, G. Yves, Athwal, George S. et Rouleau, Dominique M.. 2016. « Effect of elbow position on radiographic measurements of radio-capitellar alignment ». World Journal of Orthopedics, vol. 7, nº 2. pp. 117-122.
Compte des citations dans Scopus : 11.

Sarafan, S., Lévesque, J.-B., Wanjara, P., Gholipour, J. et Champliaud, H.. 2016. « Distortion and residual stresses in electron beam-welded hydroelectric turbine materials ». Science and Technology of Welding and Joining, vol. 21, nº 6. pp. 473-478.
Compte des citations dans Scopus : 8.

Sarafan, S., Wanjara, P., Gholipour, J. et Champliaud, H.. 2016. « Global and local characteristics of an autogenous single pass electron beam weld in thick gage UNS S41500 steel ». Materials Science and Engineering: A, vol. 666. pp. 360-371.
Compte des citations dans Scopus : 7.

Sathiaraj, G. D., Tsai, C. W., Yeh, J. W., Jahazi, M. et Bhattacharjee, P. P.. 2016. « The effect of heating rate on microstructure and texture formation during annealing of heavily cold-rolled equiatomic CoCrFeMnNi high entropy alloy ». Journal of Alloys and Compounds, vol. 688. pp. 752-761.
Compte des citations dans Scopus : 34.

Savaria, Vincent, Bridier, Florent et Bocher, Philippe. 2016. « Predicting the effects of material properties gradient and residual stresses on the bending fatigue strength of induction hardened aeronautical gears ». International Journal of Fatigue, vol. 85. pp. 70-84.
Compte des citations dans Scopus : 77.

Sheremetyev, V., Brailovski, V., Prokoshkin, S., Inaekyan, K. et Dubinskiy, S.. 2016. « Functional fatigue behavior of superelastic beta Ti-22Nb-6Zr(at%) alloy for load-bearing biomedical applications ». Materials Science and Engineering: C, vol. 58. pp. 935-944.
Compte des citations dans Scopus : 38.

Simoneau, C., Brailovski, V. et Terriault, P.. 2016. « Design, manufacture and tensile properties of stochastic porous metallic structures ». Mechanics of Materials, vol. 94. pp. 26-37.
Compte des citations dans Scopus : 22.

Slamani, Mohamed, Gauthier, Sébastien et Chatelain, Jean-François. 2016. « Comparison of surface roughness quality obtained by high speed CNC trimming and high speed robotic trimming for CFRP laminate ». Robotics and Computer-Integrated Manufacturing, vol. 42. pp. 63-72.
Compte des citations dans Scopus : 33.

Stinville, J. C., Echlin, M. P., Texier, D., Bridier, F., Bocher, P. et Pollock, T. M.. 2016. « Sub-grain scale digital image correlation by electron microscopy for polycrystalline materials during elastic and plastic deformation ». Experimental Mechanics, vol. 56, nº 2. pp. 197-216.
Compte des citations dans Scopus : 128.

Tahvilian, Amir Masoud, Hazel, Bruce, Rafieian, Farzad, Liu, Zhaoheng et Champliaud, Henri. 2016. « Force model for impact cutting grinding with a flexible robotic tool holder ». International Journal of Advanced Manufacturing Technology, vol. 85, nº 1. pp. 133-147.
Compte des citations dans Scopus : 9.

Texier, D., Zedan, Y., Amoros, T., Feulvarch, E., Stinville, J. C. et Bocher, P.. 2016. « Near-surface mechanical heterogeneities in a dissimilar aluminum alloys friction stir welded joint ». Materials and Design, vol. 108. pp. 217-229.
Compte des citations dans Scopus : 32.

Toliopoulos, Panagiota, Hagemeister, Nicola, Fuentes, Alexandre, Desmeules, François et Vendittoli, Pascal-André. 2016. « Normal knee gait kinematics: Describing a normal cohort and illustrating differences between genders ». Neurophysiologie Clinique/Clinical Neurophysiology, vol. 46, nº 4–5. p. 283.

Torres, Yaniel, Nadeau, Sylvie et Morency, François. 2016. « Study of fatigue and workload among aircraft de-icing technicians ». Occupational Ergonomics, vol. 13, nº 2. pp. 79-90.
Compte des citations dans Scopus : 6.

Touré, Mamadou Kabirou, Fahsi, Adil et Soulaimani, Azzeddine. 2016. « Stabilised finite-element methods for solving the level set equation with mass conservation ». International Journal of Computational Fluid Dynamics, vol. 30, nº 1. pp. 38-55.
Compte des citations dans Scopus : 8.

Touré, Mamadou Kabirou et Soulaïmani, Azzeddine. 2016. « Stabilized finite element methods for solving the level set equation without reinitialization ». Computers & Mathematics with Applications, vol. 71, nº 8. pp. 1602-1623.
Compte des citations dans Scopus : 18.

Trünkle, Julian, Mohammed-Taifour, Abdelouahab et Weiss, Julien. 2016. « Fluctuating pressure measurements in a turbulent separation bubble ». Comptes Rendus Mécanique, vol. 344, nº 1. pp. 60-67.
Compte des citations dans Scopus : 7.

Vaillancourt, Véronique, Gendron, Martine, Leroux, Tony, Laroche, Chantal, Fortier, Pauline, Giguère, Christian et Voix, Jérémie. 2016. « Utilisation des prothèses auditives en milieu de travail bruyant : problématique, pratiques courantes et outils utilisés par les professionnels de la santé au Québec ». [Article scientifique]. Travail et Santé, vol. 32, nº 1. pp. 20-25.

Vanderesse, N., Anderson, M., Bridier, F. et Bocher, P.. 2016. « Inter- and intragranular delta phase quantitative characterization in Inconel 718 by means of image analysis ». Journal of Microscopy, vol. 261, nº 1. pp. 79-87.
Compte des citations dans Scopus : 8.

Vanderesse, N., Ky, I., Quevedo Gonzalez, F., Nuño, N. et Bocher, P.. 2016. « Image analysis characterization of periodic porous materials produced by additive manufacturing ». Materials & Design, vol. 92. pp. 767-778.
Compte des citations dans Scopus : 31.

Viallet, Guilhem et Voix, Jérémie. 2016. « Custom molded silicon earplugs: effect of material properties on acoustic attenuation and mechanical skin contact ». [Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 44, nº 3. pp. 160-161.
Compte des citations dans Scopus : 1.

Vinches, Ludwig, ZemZem, Mohamed, Hallé, Stéphane, Peyrot, Caroline, Wilkinson, Kevin J. et Tufenkji, Nathalie. 2016. « Effectiveness of protective gloves against engineered nanoparticles: Difficulties in evaluation ». International Journal of Theoretical and Applied Nanotechnology, vol. 4. pp. 9-16.

Vinches, Ludwing et Hallé, Stéphane. 2016. « Les particules ultrafines en milieu de travail : une exposition insuffisamment maitrisée ». Bulletin de veille scientifique - Anses, nº 30. pp. 22-24.

Vu, Viet Hung, Bechir, Badri, Thomas, Marc et Pierre, Jean. 2016. « Operational modal analysis on a pump operating at varying speeds: an industrial history case ». Mechanics & Industry, vol. 17, nº 1.
Compte des citations dans Scopus : 2.

Vu, Viet-Hung, Liu, Zhaoheng, Thomas, Marc, Li, Wenchao et Hazel, Bruce. 2016. « Output-only identification of modal shape coupling in a flexible robot by vector autoregressive modeling ». Mechanism and Machine Theory, vol. 97. pp. 141-154.
Compte des citations dans Scopus : 13.

Zazoum, Bouchaib, Fréchette, Michel et David, Eric. 2016. « LDPE/tio2 nanocomposites: Effect of poss on structure and dielectric properties ». IEEE Transactions on Dielectrics and Electrical Insulation, vol. 23, nº 5. pp. 2505-2507.
Compte des citations dans Scopus : 20.

Compte rendu de conférence

Abu Zwaida, Tarek et Beauregard, Yvan. 2016. « Product development and improvement ». In 11th International Conference on Modeling, Optimization & Simulation (MOSIM 2016) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Aghazadeh, Fatemeh, Thomas, M. et Tahan, A.. 2016. « Effect of varying cutting parameters on the accuracy of tool wear monitoring in milling process ». In CMVA Conference : Covering the Spectrum: From Fundamentals to Future Trends (Toronto, ON, Canada, Oct. 26-28, 2016)

Aidibe, Ali, Nejad, Mojtaba Kamali, Tahan, Antoine, Jahazi, Mohammad et Cloutier, Sylvain G.. 2016. « A proposition for new quality 3D indexes to measure surface roughness ». In 7th HPC 2016 - CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016) Coll. « Procedia CIRP », vol. 46. pp. 327-330. Elsevier.
Compte des citations dans Scopus : 5.

Arfaoui, M. A., Dolez, P. I., Dubé, M. et David, É.. 2016. « Hydrophobic treatment for jute fibers based on zinc oxide nanoparticles ». In Advanced Materials - TechConnect Briefs 2016 (Washington, DC, USA, May 22-25, 2016) pp. 284-287. TechConnect.
Compte des citations dans Scopus : 2.

Attoui, Hocine et Bouzid, Abdel-Hakim. 2016. « On the equivalent mechanical properties of spiral wound gaskets ». In ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016) American Society of Mechanical Engineers (ASME).
Compte des citations dans Scopus : 3.

Azzouzi, El-Mehdi, Iuliano, Mariengela, Hammadi, Moncef, Plateaux, Régis et Marchand, Françoise. 2016. « Process integration and design optimization technologies for modelling improvement ». In IEEE International Symposium on Systems Engineering (ISSE) (Edinburgh, UK, Oct. 03-05, 2016) IEEE.
Compte des citations dans Scopus : 1.

Babanezhad, Kaveh, Foucault, Gilles, Tahan, Antoine et Bigeon, Jean. 2016. « A bi-criterion flexible registration method for fixtureless inspection of compliant parts ». In 7th HPC 2016 - CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016) Coll. « Procedia CIRP », vol. 46. pp. 307-310. Elsevier.
Compte des citations dans Scopus : 4.

Belanger, Pierre et Boivin, Guillaume. 2016. « Development of an omnidirectional SH0 piezoceramic transducer ». In 42nd annual review of progress in quantitative nondestructive evaluation : incorporating the 6th European-American Workshop on Reliability of NDE (Minneapolis, MN, USA, July 26-31, 2015) Coll. « AIP conference proceedings », vol. 1706. AIP Publishing.

Belanger, Pierre et Boivin, Guillaume. 2016. « Piezoceramic omnidirectional transduction of the fundamental shear horizontal guide wave mode ». In Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, and Civil Infrastructure 2016 (Las Vegas, NV, USA, Mar. 20-24, 2016) Coll. « Proceedings of SPIE », vol. 9804. USA : SPIE.
Compte des citations dans Scopus : 3.

Belzile, P., Lamarche, L. et Rousse, D. R.. 2016. « Multiple source ground heat storage ». In 7th European Thermal-Sciences conference (Eurotherm) (Krakow, Poland, June 19-23, 2016) Coll. « Journal of Physics: Conference Series », vol. 745. Institute of Physics Publishing.

Benhamed, S., Ibrahim, H., Belmokhtar, K., Hosni, H., Ilinca, A., Rousse, D., Chandra, A. et Ramdenee, D.. 2016. « Dynamic modeling of diesel generator based on electrical and mechanical aspects ». In 2016 IEEE Electrical Power and Energy Conference (EPEC) (Ottawa, ON, Canada, Oct. 12-14, 2016) IEEE.
Compte des citations dans Scopus : 27.

Berdal, M., Tahan, S-A. et Gagnon, M.. 2016. « Maintenance strategy in fatigue based on the Hasofer Lind reliability index ». In 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Blancke, Olivier, Tahan, Antoine, Komljenovic, Dragan, Amyot, Normand, Hudon, Claude et Lévesque, Melanie. 2016. « A hydrogenerator model-based failure detection framework to support asset management ». In 2016 IEEE International Conference on Prognostics and Health Management (ICPHM) (Ottawa, ON, Canada, June 20-22, 2016) Piscataway, NJ, USA : IEEE.
Compte des citations dans Scopus : 4.

Boivin, Guillaume, Viens, Martin et Belanger, Pierre. 2016. « Development of a low frequency shear horizontal piezoelectric transducer for the generation of plane SH waves ». In 42nd annual review of progress in quantitative nondestructive evaluation : incorporating the 6th European-American Workshop on Reliability of NDE (Minneapolis, MN, USA, July 26-31, 2015) Coll. « AIP conference proceedings », vol. 1706. AIP Publishing.
Compte des citations dans Scopus : 14.

Bonzel, Pierre et Beauregard, Yvan. 2016. « Influence de la gestion du risque dans le processus de développement produit en aéronautique ». In 11ème Conférence Francophone de Modélisation, Optimisation et Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Bouzid, Abdel-Hakim et Zhu, Linbo. 2016. « Effect of adjacent tube expansion on the residual contact pressure of tube-to-tubesheet joints ». In ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016) American Society of Mechanical Engineers (ASME).
Compte des citations dans Scopus : 2.

Brassard, David et Dubé, M.. 2016. « Thermal characterization of conductive polymeric nanocomposites ». In 5th International Carbon Composites Conference (IC3) (Arcachon, France, May 09-11, 2016)

Brulatout, J., Garnier, F. et Seers, P.. 2016. « Comparison between LES and experimental round jet for diesel fuel spray simulation ». In 54th AIAA Aerospace Sciences Meeting, 4-8 Jan. 2016 (San Diego, CA, USA, Jan. 4-8, 2016) Coll. « AIAA paper », vol. AIAA 2016-0342. Reston, VA, USA : American Institute of Aeronautics and Astronautics.

Carioli, J., Aidin, D., Zednik, R. J. et Voix, J.. 2016. « Conception et modélisation d’un dispositif intra-auriculaire pour récupérer l’énergie de déformation du conduit auditif causée par les mouvements de la mâchoire ». In Colloque scientifique Énergie 2016 (CSE) (Québec, QC, Canada, 2016)

Chadha, Kanwal, Shahriari, Davood et Jahazi, Mohammad. 2016. « Modeling metadynamic recrystallization of a die steel during ingot breakdown process ». In NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes (Troyes, France, July 04-07, 2016) Coll. « MATEC Web Conferences », vol. 80. EDP Sciences.
Compte des citations dans Scopus : 4.

Champliaud, Henri, Feng, Zhengkun, Provencher, David, Tousignant, Danick et Gholipour, Javad. 2016. « Piecewise fifth order spline interpolation for line heating forming process ». In ASME International Mechanical Engineering Congress and Exposition (IMECE2016) (Phoenix, AZ, USA, Nov. 11-17, 2016) ASME.
Compte des citations dans Scopus : 1.

Chatenet, Q., Tahan, A., Gagnon, M. et Chamberland-Lauzon, J.. 2016. « Numerical model validation using experimental data: Application of the area metric on a Francis runner ». In 28th IAHR symposium on Hydraulic Machinery and Systems (IAHR2016) (Grenoble, France, July 4-8, 2016) Coll. « IOP Conference Series : Earth and Environmental Science », vol. 49. IOP Publishing.
Compte des citations dans Scopus : 2.

Chouchene, W., Debia, M., Castro, C., Bahloul, A. et Hallé, S.. 2016. « Improving the estimation of the interzone air exchange rate in the near field-far field model by computational fluid dynamic simulations ». In The American Industrial Hygiene Conference & Exposition (Baltimore, MD, USA, May 23-36, 2016)

Comot, Pierre, Bocher, Philippe et Belanger, Pierre. 2016. « Ultrasonic guided wave inspection of Inconel 625 brazed lap joints ». In Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, and Civil Infrastructure 2016 (Las Vegas , NV, USA, Mar. 20-24, 2016) Coll. « Proceedings of SPIE », vol. 9804. SPIE.
Compte des citations dans Scopus : 1.

Couderc, H., Vanga-Bouanga, C., Fréchette, M. et David, E.. 2016. « Fabrication and dielectric properties of highly loaded polypropylene micro- and nano-composites ». In IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Toronto, ON, Canada, Oct. 16-19, 2016) pp. 534-537. IEEE.
Compte des citations dans Scopus : 1.

Coulombe, Hugo, Lachapelle, Guillaume, Neesham-Grenon, Eve, Hallé, Stéphane et Debia, Maximilien. 2016. « Diesel exhaust exposures in an underground mine ». In 3rd International Symposium on Mine Safety, Science and Engineering : Operational and Environmental Mine Health and Safety Practice and Innovation : Symposium Proceedings (Montreal, QC, Canada, Aug. 13-19, 2016) McGill University.

De Lima, Carlos A. S., Amurin, Leice G., Demarquette, Nicole R. et David, Éric. 2016. « Morphological and electric properties of block copolymer/carbon nanotubes nanocomposites obtained by different methods ». In 2016 IEEE Electrical Insulation Conference (EIC) (Montréal, QC, Canada, June 19-22, 2016) pp. 588-591. Piscataway, NJ, USA : IEEE.
Compte des citations dans Scopus : 2.

Debibi, R., Ibrahim, H., Belmokhtar, K., Ilinca, A., Rousse, D., Chandra, A., Ramdenee, D. et Ben Arfi, A.. 2016. « Analysis of a micro-grid behavior by a supervisory control and data acquisition system-experimental validation ». In Canadian Conference on Electrical and Computer Engineering (CCECE) (Vancouver, BC, Canada, May 14-18, 2016) IEEE.
Compte des citations dans Scopus : 1.

Dehayem Nodem, F. I. et Kenné, J.-P.. 2016. « Production control of a deteriorated remanufacturing system within an open-reverse supply chain ». In 24th Mediterranean Conference on Control and Automation (MED) (Athens, Greece, June 21-24, 2016) pp. 1266-1271. Piscataway, NJ, USA : IEEE.
Compte des citations dans Scopus : 2.

Delnavaz, Aidin et Voix, Jérémie. 2016. « Flexible energy harvesting from hard piezoelectric beams ». In The 16th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2016) (Paris, France, Dec. 6-9, 2016) Coll. « Journal of Physics : Conference Series », vol. 773. IOP Publishing.

Diagne, I., Gagnon, M. et Tahan, A.. 2016. « Modeling the dynamic behavior of turbine runner blades during transients using indirect measurements ». In 28th IAHR Symposium on Hydraulic Machinery and Systems (IAHR 2016) (Grenoble, France, July 04-08, 2016) Coll. « IOP Conference Series : Earth and Environmental Science », vol. 49. UK : IOP Publishing Ltd..
Compte des citations dans Scopus : 8.

Dolez, P. I., Ragoubi, M., David, E. et Weltrowski, M.. 2016. « Reduction in HDPE geomembrane thermal expansion using nanoclay particles ». In Advanced MaterialsAnnual : TechConnect Briefs 2016 (Washington, DC, USA, May 22-25, 2016) pp. 296-299. TechConnect.
Compte des citations dans Scopus : 1.

Doré, Sylvie. 2016. « What seniors have to say about their engagement ». In 6th Annual Canadian Engineering Education Association (CEEA) (Halifax, NS, Canada, June 19-23, 2016) CEEA = ACEG.

Fakhraei, Samin et Weiss, Julien. 2016. « Uncertainty analysis of test data at the NRC 1.5-meter trisonic wind tunnel ». In 32nd AIAA Aerodynamic Measurement Technology and Ground Testing Conference (Washington, DC, USA, June 13-17, 2016) Coll. « AIAA paper », vol. AIAA 2016-3498. Reston, VA, USA : American Institute of Aeronautics and Astronautics.

Fareh, F., Demers, V., Turenne, S. et Scalzo, O.. 2016. « Segregation measurement of inconel 718 feedstocks used in low-pressure metal injection molding ». In International Conference on Advanced Materials Engineering and Technology (ICAMET) (Kaohsiung City, Taiwan, Dec. 4-5, 2015) Coll. « Materials Science Forum », vol. 857. pp. 286-290. Trans Tech Publications Ltd.
Compte des citations dans Scopus : 8.

Flores-Maradiaga, Alex, Benoit, Robert et Masson, Christian. 2016. « Enhanced method for multiscale wind simulations over complex terrain for wind resource assessment ». In The Science of Making Torque from Wind (TORQUE 2016) (Munich, Germany, Oct. 5-7, 2016) Coll. « Journal of Physics : Conference Series », vol. 753. IOP Publishing Ltd..
Compte des citations dans Scopus : 1.

Fréchette, M. F., Anh, T. Tran, Heid, T., Vanga-Bouanga, C., Ghafarizadeh, S. B., David, E., El-Khoury, D. et Castellon, J.. 2016. « Dielectric properties of epoxy composites containing both molecular and nanoparticulate silica ». In IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Toronto, ON, Canada, Oct. 16-19, 2016) pp. 558-562. IEEE.
Compte des citations dans Scopus : 3.

Fréchette, M. F., Veillette, R., Trudeau, M., Pirondelli, A., Fabiani, D., Anh, T. T., Ghafarizadeh, B., David, E., El-Khoury, D., Castellon, J. et Arinero, R.. 2016. « Dielectric design of LDPE properties: With the help of double-core Si/SiO2 and Carbon Black ». In Annual Report - Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Toronto, ON, Canada, Oct. 16-19, 2016) pp. 52-57. IEEE.
Compte des citations dans Scopus : 4.

Fréchette, Michel, Heid, Thomas, Zribi, Eya, Vanga-Bouanga, Christele et David, Éric. 2016. « Dielectric properties of a functional epoxy: The case of composites containing carbon black and reactive POSS ». In 2016 IEEE Electrical Insulation Conference (EIC) (Montréal, QC, Canada, June 19-22, 2016) pp. 583-587. Piscataway, NJ, USA : IEEE.
Compte des citations dans Scopus : 3.

Fréchette, Michel, Zribi, Eya, Vanga-Bouanga, Christele et David, Éric. 2016. « Effect of various parameters on the dielectric behavior of an epoxy composite containing 10 wt% of carbon black ». In 2016 IEEE International Conference on Dielectrics (ICD) (Montpellier, France, July 03-07, 2016) pp. 10-14. Piscataway, NJ, USA : IEEE.
Compte des citations dans Scopus : 1.

Gholami, Mohammad Sadegh, Doutres, Olivier et Atalla, Noureddine. 2016. « Effect of variability in microgeometry of polyurethane foams on their macroscopic acoustic performance ». In INTER-NOISE and NOISE-CON Congress and Conference Proceedings (NoiseCon16) (Rhodes Island, Greece, June 13-15, 2016) pp. 1086-1094. Institute of Noise Control Engineering.

Guillon, L., Hallé, S. et Rousse, D. R.. 2016. « A one year performance comparison of transparent and unglazed transpired collectors ». In 29th international conference on efficiency, cost, optimization, simulation and environmental impact of energy system (Portoroz, Slovenia, June 19-23, 2016)

Günebak, Servet, Nadeau, Sylvie, Morency, François et Sträeter, Oliver. 2016. « Aircraft ground deicing as a complex sociotechnical system: towards a safer and more efficient communication process for aircraft ground deicing ». In Frühjahrskongress : Arbeit in komplexen Systemen. Digital, vernetzt, human?! (Aachen, Germany, Mars 2-4, 2016) Gesellschaft für Arbeitswissenschaft.

Guo, Meng, David, Éric, Fréchette, Michel et Demarquette, Nicole R.. 2016. « Low-density polyethylene/polyhedral oligomeric silsesquioxanes composites obtained by extrusion ». In IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Toronto, ON, Canada, Oct. 16-19, 2016) pp. 647-650. IEEE.
Compte des citations dans Scopus : 3.

Guo, Meng, Fréchette, Michel, David, Éric et Demarquette, Nicole R.. 2016. « Influence of fabrication techniques on the dielectric properties of PE/POSS polymeric composites ». In 2016 IEEE Electrical Insulation Conference (EIC) (Montréal, QC, Canada, June 19-22, 2016) pp. 297-300. Piscataway, NJ, USA : IEEE.
Compte des citations dans Scopus : 4.

Harris, Nathan, Shahriari, Davood et Jahazi, Mohammad. 2016. « Analysis of void closure during open die forging process of large size steel ingots ». In 16th Metal Forming International Conference (Krakow, Poland, Sept. 18-21, 2016) Coll. « Key Engineering Materials », vol. 716. pp. 579-585.
Compte des citations dans Scopus : 7.

Heid, Thomas, David, Éric et Fréchette, Michel. 2016. « Modeling the thermal conductivity of Epoxy/POSS and Epoxy/POSS/cBN composites ». In 2016 IEEE International Conference on Dielectrics (ICD) (Montpellier, France, July 03-07, 2016) pp. 414-417. Piscataway, NJ, USA : IEEE.
Compte des citations dans Scopus : 2.

Helal, Emna, Demarquette, Nicole R., David, Éric et Fréchette, Michel. 2016. « Evaluation of dielectric behavior of polyethylene/thermoplastic elastomer blends containing zinc oxide (ZnO) nanoparticles for high voltage insulation ». In 2016 IEEE Electrical Insulation Conference (EIC) (Montréal, QC, Canada, June 19-22, 2016) pp. 592-595. Piscataway, NJ, USA : IEEE.
Compte des citations dans Scopus : 12.

Inaekyan, Karine, Paserin, Vladimir, Bailon-Poujol, Ian et Brailovski, Vladimir. 2016. « Binder-jetting additive manufacturing with water atomized iron powders ». In AMPM Conference on Additive Manufacturing 2016 (Boston, MA, USA, June 05-07, 2016)

Jaafar, Mohamad Ali, Gibout, Stéphane, Rousse, Daniel et Bédécarrats, Jean-Pierre. 2016. « Numerical study of dendritic growth during solidification using front-tracking method ». In 7th European Thermal-Sciences Conference (Eurotherm) (Krakow, Poland, June 19-23, 2016) Coll. « Journal of Physics: Conference Series », vol. 745. Institute of Physics Publishing.
Compte des citations dans Scopus : 1.

Jaafar, Mohamad Ali, Gibout, Stéphane, Rousse, Daniel et Bédécarrats, Jean-Pierre. 2016. « Étude numérique préliminaire de la croissance dendritique lors de la rupture de surfusion de corps purs par méthode de suivi d'interface ». In Actes du Congrès de la Société Française de Thermique (Toulouse, France, 01-03 juin 2016) Société Française de Thermique.

Jaifer, Rabie, Beauregard, Yvan et Bhuiyan, Nadia. 2016. « Revue littérature sur la gestion de performances en développement de produits : cas de l’industrie aéronautique ». In 11th International Conference on Modeling, Optimization & Simulation (MOSIM 2016) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Jbira, I., Tlija, M., Louhichi, B. et Tahan, A.. 2016. « CAD/Tolerancing integration: mechanical system with geometric defects ». In 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Jomaa, W., Mechri, J., Lévesque, J., Gakwaya, A., Songmene, V. et Bocher, P.. 2016. « Finite element analysis of serrated chip formation in machining of 7075-T651 alluminum alloy ». In XXVIII International Mineral Processing Congress (IMPC) (Québec, QC, Canada, Sept. 11-15, 2016)

Joubair, A., Tahan, A. S. et Bonev, I. A.. 2016. « Performances of observability indices for industrial robot calibration ». In IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (Daejeon, South Korea, Oct. 09-14, 2016) pp. 2477-2484. IEEE.
Compte des citations dans Scopus : 21.

Kazeminia, M. et Bouzid, A. H.. 2016. « Predicting leakage in packed stuffing boxes ». In 23rd International Conference on Fluid Sealing 2016 (Manchester, UK, Mar. 2-3, 2016) pp. 45-59. BHR Group.
Compte des citations dans Scopus : 11.

Kazeminia, Mehdi et Bouzid, Abdel-Hakim. 2016. « Characterization and modeling of time-dependent behaviour of braided packing rings ». In ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016) American Society of Mechanical Engineers (ASME).
Compte des citations dans Scopus : 1.

Kedadouche, Mourad, Thomas, Marc et Tahan, Antoine. 2016. « Empirical mode decomposition combined with empirical wavelets for extracting bearing frequencies in a noisy environment and early detection of defects ». In Advances in Condition Monitoring of Machinery in Non-Stationary Operations: Proceedings of the Fourth International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO'2014, Lyon, France December 15-17 (Lyon, France, Dec. 15-17, 2014) Coll. « Applied Condition Monitoring », vol. 4. pp. 151-165. Springer International Publishing.
Compte des citations dans Scopus : 1.

Khay, Mohamed, Ngo, Anh Dung et Ganesan, Rajamohan. 2016. « Frequency effect on fatigue tensile behaviour of carbon/epoxy plain weave laminates under different hygrothermal conditions ». In Design, Manufacturing and Applications of Composites : Proceedings of the Eleventh Joint Canada-Japan Workshop on Composites and the First Joint Canada-Japan-Vietnam Workshop on Composites pp. 317-325. DEStech Publications.

Khosravi, G., Hallé, S., Ahmadi Golestan, M. A. et Morency, F.. 2016. « The impact of exhaust location on ventilation system performance in a hospital isolation room ». In 24th Annual Conference of the CFD Society of Canada (Kelowna, BC, Canada, June 26-29, 2016)

Kouedeu, A. F., Kenné, J-P. et Songmene, V.. 2016. « Hybrid control of processing/reprocessing rates for a deteriorated manufacturing system ». In 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Lamarche, Louis. 2016. « Short-Time modeling of geothermal systems ». In ECOS 2016 : proceedings of the 29th Interantional Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy systems (Portorož, Slovenia, June 19-23, 2016) Ljubljana : Faculty of Mechanical Engineering.
Compte des citations dans Scopus : 2.

Lamarre, S. G., Demers, V. et Chatelain, J-F.. 2016. « Experimental study of the rheological properties and moldability of wax-based feedstocks used in low-pressure powder injection molding ». In MONTREAL’2016 AES-ATEMA 28th International on Advances and Trends in Engineering Materials and their Applications (Montreal, QC, Canada, June 20-24, 2016) pp. 175-183. Advanced Engineering Solutions.

Landry, Jonathan, Soulaimani, Azzedine, Luke, Edward et Ben Haj Ali, Amine. 2016. « Robust moving-mesh algorithms for hybrid stretched meshes: application to moving boundaries problems ». In 54th AIAA Aerospace Sciences Meeting, 4-8 Jan. 2016 (San Diego, CA, USA, Jan. 4-8, 2016) Coll. « AIAA paper », vol. AIAA 2016-0838. Reston, VA, USA : American Institute of Aeronautics and Astronautics.
Compte des citations dans Scopus : 2.

Laribi, Iyed, Badri, B. et Thomas, M.. 2016. « Online condition monitoring of variable speed bar mills ». In CMVA Conference : Covering the Spectrum: From Fundamentals to Future Trends (Toronto, ON, Canada, Oct. 26-28, 2016)

Le Floch, Arnaud, Mohammed-Taifour, Abdelouahab, Weiss, Julien, Dufresne, Louis, Vétel, Jerôme et Jondeau, Emmanuel. 2016. « Effect of boundary-layer superstructures on separation bubble unsteadiness ». In 24th International Congress of Theoretical and Applied Mechanics (Montreal, QC, Canada, Aug. 21-26, 2016)

Lezzoum, Narimene et Voix, Jérémie. 2016. « Assessment of sound source localization of an intra-aural audio wearable device for audio augmented reality applications ». In IEEE 18th International Workshop on Multimedia Signal Processing (MMSP) (Montreal, QC, Canada, Sept. 21-23, 2016) Piscataway, NJ, USA : IEEE.

Maghrabie, Hesham, Beauregard, Yvan et Schiffauerova, Andrea. 2016. « The use of grey systems theory in complex decision problems under uncertainty ». In 11ème Conférence Francophone de Modélisation, Optimisation et Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Mandatsy Moungomo, Jean Brice, Kouya, Donatien Nganga et Songmene, Victor. 2016. « Aluminium machining chips formation, treatment recycling: A review ». In 13th International Aluminium Conference (INALCO 2016) (Naples, Italy, Sept. 21-23, 2016) Coll. « Key Engineering Materials », vol. 710. pp. 71-76. Trans Tech Publications Ltd.
Compte des citations dans Scopus : 6.

Mandatsy Moungomo, Jean Brice, Kouya, Donatien Nganga et Songmene, Victor. 2016. « Turning and drilling machinability of recycled aluminum alloys ». In 13th International Aluminium Conference (INALCO) (Naples, Italy, Sept. 21-23, 2016) Coll. « Key Engineering Materials », vol. 710. pp. 77-82. Trans Tech Publications Ltd.
Compte des citations dans Scopus : 1.

Masoumi, Mahdi, Zedan, Yasser, Texier, Damien, Jahazi, Mohammad et Bocher, Philippe. 2016. « Friction stir welding of AA2024 and AA2198 Aluminum alloys: effect of tool geometry and process parameters ». In 2nd International Conference on Welding and Non Destructive Testing (ICWNDT) (Tehran, Iran, Dec. 20-21, 2016)

Masoumi, Mahdi, Zedan, Yasser, Texier, Damien, Jahazi, Mohammad et Bocher, Philippe. 2016. « The influence of tool geometry on mechanical properties of friction stir welded AA-2024 and AA-2198 joints ». In 34th International Conference and Exhibition of ICSOBA (Quebec, QC, Canada, Oct. 03-06, 2016) The International Committee for Study of Bauxite, Alumina & Aluminium (ICSOBA).

Melanson, Annick et Nadeau, Sylvie. 2016. « Managing OHS in complex and unpredictable manufacturing systems: can FRAM bring agility? ». In Advances in Ergonomics of Manufacturing: Managing the Enterprise of the Future: Proceedings of the AHFE 2016 International Conference on Human Aspects of Advanced Manufacturing, July 27-31, 2016, Walt Disney World®, Florida, USA (Florida, FL, USA, July 27-31, 2016) Coll. « Advances in Intelligent Systems and Computing », vol. 490. pp. 341-348. Springer International Publishing.
Compte des citations dans Scopus : 5.

Michel, Hesser Taboada, Reda, Layla Sasaki, Santos, Georgia Effgen, Cormier, Jonathan, Dumont, Christian, Villechaise, Patrick, Bocher, Philippe, Texier, Damien, Georges, Eric, Bridier, Florent, Hamon, Florence et Devaux, Alexandre. 2016. « Mechanical properties of cast wrought hybrid disks ». In Superalloys 2016: Proceedings of the 13th International Symposium on Superalloys (Seven Springs, PA, USA, Sept. 11-15, 2016) pp. 539-548. Minerals, Metals and Materials Society.
Compte des citations dans Scopus : 3.

Mohammed-Taifour, Abdelouahab et Weiss, Julien. 2016. « PIV investigations in the centerline plane of a pressure-induced turbulent separation bubble ». In 54th AIAA Aerospace Sciences Meeting (San Diego, CA, USA, Jan. 4-8, 2016) Coll. « AIAA paper », vol. AIAA 2016-2078. Reston, VA, USA : American Institute of Aeronautics and Astronautics.

Mohseni, Ehsan, Viens, Martin et Franca, Demartonne R.. 2016. « A model-based study of the effect of semi-elliptical surface notch geometry on the signal of a Split-D eddy current probe ». In NDT Canada 2016 (Burlington, ON, Canada, Nov. 15-17, 2016) CINDE.

Moret, Maxime, Delecourt, Alexandre, Moustapha, Hany, Garnier, François et Abenhaim, Acher-Igal. 2016. « Automated thermal and stress preliminary analyses applied to a turbine rotor ». In ASME Turbo Expo : Turbomachinery Technical Conference and Exposition (Seoul, South Korea, June 13-17, 2016) ASME International.
Compte des citations dans Scopus : 2.

Mourier, A., Demers, V., Baril, Y. et Figueroa, J.. 2016. « Characterization of copper-silver-copper joints fabricated by sintering of silver nanoparticles ». In International Conference & Exhibition on Advanced & Nano Materials (ICANM) (Montreal, QC, Canada, Aug. 01-03, 2016) pp. 145-155.

Nazarenko, Y., Fournier, S., Kurien, U., Rangel-Alvarado, R. B., Seers, P. et Ariya, P. A.. 2016. « Effect of low ambient temperature and contact with snow on composition of dilute exhaust from a light-duty gasoline vehicle engine ». In Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition (New Orleans, LA, USA, June 20-23, 2016) pp. 2901-2905. Air and Waste Management Association.

Ngô, Valérie Tuyêt Mai, Nadeau, Sylvie, Mackowiak, Justine et Hallé, Stéphane. 2016. « Ergonomic challenges in designing personal cooling equipment for ultra-deep mining ». In Advances in Ergonomics in Design: Proceedings of the AHFE 2016 International Conference on Ergonomics in Design, July 27-31, 2016, Walt Disney World®, Florida, USA (Florida, FL, USA, July 27-31, 2016) Coll. « Advances in Intelligent Systems and Computing », vol. 485. pp. 757-767. Springer International Publishing.
Compte des citations dans Scopus : 5.

Ngoc, Hai Trân, Lê, Cung et Ngô, Anh Dung. 2016. « Nghiên cứu thực nghiệm về ổn định tốc độ của trục chính máy tiện khi truyền động bằng động cơ thủy lực ». In 8th Vietnam Conference on Mecatronique (VCM) (Can Tho City, Vietnam, Nov. 25-26, 2016)

Nguyen, T. H. D. et Dao, T. M.. 2016. « Robust optimization for lean supply chain design under disruptive risk ». In IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Bali, Indonesia, Dec. 04-07, 2016) pp. 1503-1507. IEEE.
Compte des citations dans Scopus : 3.

Nguyen, Thi Hong Dang et Dao, Thien My. 2016. « New strategy to optimize lean supply chain design by meta-heuristic ». In 5th International Conference on Material Science and Engineering Technology (ICMSET) (Phuket, Thailand, Oct. 14-16, 2016)

Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali. 2016. « Joint optimal production and replacement policy for a deteriorated closed-loop manufacturing system ». In 11ème Conférence Francophone de Modélisation, Optimisation et Simulation (MOSIM) (Montréal, QC, Canada, Aug. 21-24, 2016) MOSIM.

Pirondelli, A., Fabiani, D., Fréchette, M., Vanga Bouanga, C., Guo, M. et David, E.. 2016. « Electric and thermal properties of polyethylene-based nanodielectrics containing graphene-like additives ». In IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Toronto, ON, Canada, Oct. 16-19, 2016) pp. 615-618. IEEE.
Compte des citations dans Scopus : 2.

Pirondelli, A., Fabiani, D., Fréchette, M., Vanga Bouanga, C., Guo, M. et David, E.. 2016. « Surface and breakdown resistance of polyethylene-based nano-dielectrics containing graphene-like additives ». In IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Toronto, ON, Canada, Oct. 16-19, 2016) pp. 619-622. IEEE.
Compte des citations dans Scopus : 4.

Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali. 2016. « Adaptive control of hybrid failure-prone manufacturing systems under demand variation and uncertainty ». In 11th International Conference on Modeling, Optimization and SIMulation - MOSIM'16 (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Proteau, Antoine, Tahan, S.-Antoine, Maranzana, Roland et Lavoie, Pascal. 2016. « Proposition d'un modèle d'estimation de la complexité géométrique d'un porduit usine basé sur la maquette 3D ». In 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Razanamparany, S., Montreuil, E. et Garnier, F.. 2016. « Effect of a bypass flow on contrail ice particle growth in an ice engine jet ». In 24th CSME international congress (Kelowna, BC, Canada, June 26-29, 2016)

Rehman, Hafiz Laiq-Ur, Mohammed-Taifour, Abdelouahab, Weiss, Julien et Seers, Patrice. 2016. « PLIF experiments on evaporating isolated droplet and droplets array ». In 46th AIAA Thermophysics Conference (Washington, DC, USA, June 13-17, 2016) Coll. « AIAA paper », vol. AIAA 2016-4311. American Institute of Aeronautics and Astronautics.
Compte des citations dans Scopus : 1.

Rezkallah, M., Chandra, Ambrish, Rousse, D. R., Ibrahim, H. et Ilinca, A.. 2016. « Control design of new eco-friendly microgrid based on Wind/Diesel/Battery driven variable speed generators ». In IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES) (Trivandrum, India, Dec. 14-17, 2016) IEEE.
Compte des citations dans Scopus : 8.

Rezkallah, M., Chandra, Ambrish, Rousse, D. R., Ibrahim, H., Ilinca, A. et Ramdenee, D.. 2016. « Control of small-scale wind/diesel/battery hybrid standalone power generation system based on fixed speed generators for remote areas ». In IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society (Florence, Italy, Oct. 23-26, 2016) pp. 4060-4065. IEEE.
Compte des citations dans Scopus : 9.

Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, Jolanta E. et Balazinski, Marek. 2016. « Surface profile topography of trimmed and drilled carbon/epoxy composite ». In 3rd CIRP Conference on Surface Integrity (Charlotte, NC, United states, June 8-10, 2016) Coll. « Procedia CIRP », vol. 45. pp. 27-30. Elsevier.
Compte des citations dans Scopus : 5.

Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, Jolanta-Ewa et Balazinski, Marek. 2016. « Fractal analysis of cutting force and acoustic emission signals during CFRP machining ». In 7th CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016) Coll. « Procedia CIRP », vol. 46. pp. 143-146. Elsevier.
Compte des citations dans Scopus : 23.

Robin, O., Amedin, C. K., Berry, A., Atalla, N., Doutres, O. et Sgard, F.. 2016. « Sound absorption measurements : comparison of standard tests in reverberant room with measurements using a synthetized diffuse acoustic field ». In 45th International congress and exposition on noise control engineering (INTER-NOISE ) : Towards a Quieter Future (Hamburg, Germany, Aug. 21-24, 2016) pp. 4139-4148. German Acoustical Society.
Compte des citations dans Scopus : 1.

Roth, Simon-Nicolas, Léger, Pierre et Soulaïmani, Azzeddine. 2016. « Coupled hydro-mechanical cracking of concrete using XFEM in 3D ». In 9th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCoS-9) (Berkeley, CA, USA, May 29-June 01, 2016) University of California.

Santos, João Felipe, Bouserhal, Rachel, Voix, Jérémie et Falk, Tiago H.. 2016. « Objective speech quality estimation of in-ear microphone speech ». In Proceedings of the 5th ISCA/DEGA Workshop on Perceptual Quality of Systems (PQS 2016) (Berlin, Allemagne, Aug. 29-31, 2016) pp. 69-73. International Speech Communication Association.

Savaria, Christian, Garnier, François, Moustapha, Hany et Phutthavong, Patricia. 2016. « New correlations for high-pressure turbine housing and shroud segments ». In ASME Turbo Expo : Turbomachinery Technical Conference and Exposition (Seoul, South Korea, June 13-17, 2016) ASME International.

Schwaab, Quentin, Weiss, Julien, Belleau, Christian et Morency, François. 2016. « Low-cost arduino-based data acquisition system with android mobile interface for undergraduate aerodynamics laboratories ». In 32nd AIAA Aerodynamic Measurement Technology and Ground Testing Conference (Washington, DC, USA, June 13-17, 2016) Coll. « AIAA paper », vol. AIAA 2016-4323. American Institute of Aeronautics and Astronautics.
Compte des citations dans Scopus : 2.

Stanescu, M., Kajl, S. et Lamarche, L.. 2016. « Study of potential nonconformities of a new recreation center building's envelope ». In 7th European Thermal-Sciences Conference (Eurotherm) (Krakow, Poland, June 19-23, 2016) Coll. « Journal of Physics: Conference Series », vol. 745. Institute of Physics Publishing.

Tetin, Dmitri et Arteau, Jean. 2016. « Stability of stepladders and maximum push-pull force ». In Frühjahrskongress 2016 der Gesellschaft für Arbeitswissenschaft GfA (Aachen, Germany, Mar. 2-4, 2016) Dortmund : GfA-Press.

Toledano, Alvaro, Weiss, Julien, Morency, François, Broughton, Cabot et Benmeddour, Ali. 2016. « Towards the use of CFD to improve and validate the wall correction methodology at the NRC 1.5 m trisonic wind tunnel ». In 32nd AIAA Aerodynamic Measurement Technology and Ground Testing Conference (Washington, DC, USA, June 13-17, 2016) Coll. « AIAA Paper », vol. AIAA 2016-3497. American Institute of Aeronautics and Astronautics.
Compte des citations dans Scopus : 3.

Tongne, A., Robe, H., Desrayaud, C., Jahazi, M. et Feulvarch, E.. 2016. « Two dimensional Coupled Eulerian Lagrangian (CEL) model for banded structure prediction in friction stir welding with trigonal tool ». In ESAFORM 2016: 19th International ESAFORM Conference on Material Forming (Nantes, France, Apr. 27-29, 2016) Coll. « AIP Conference Proceedings », vol. 1769. USA : American Institute of Physics.

Tran Anh, T., Fréchette, M., David, É. et Ouellet-Plamondon, C.. 2016. « Impact of nature and preparation method of graphene on the electrical behavior of LDPE/Graphene composites ». In 2016 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Toronto, ON, Canada, Oct. 16-19, 2016) pp. 659-662. IEEE.
Compte des citations dans Scopus : 6.

Tran Anh, T., Vanga-Bouanga, C., David, E. et Fréchette, M.. 2016. « Dielectric response and breakdown strength improvement of LDPE/TiO2 nanocomposites by using POSS as compatibilizing agent ». In 2016 IEEE Electrical Insulation Conference (EIC) (Montréal, QC, Canada, June 19-22, 2016) pp. 65-68. Piscataway, NJ, USA : IEEE.
Compte des citations dans Scopus : 1.

Tran Anh, Tung, Vanga-Bouanga, Christele, David, Éric et Fréchette, Michel. 2016. « AC conductivity and dielectric properties modification of UHMWPE by graphene fillers ». In 2016 IEEE International Conference on Dielectrics (ICD) (Montpellier, France, July 03-07, 2016) pp. 68-71. Piscataway, NJ, USA : IEEE.

Tran, Evelyne, Beauregard, Yvan et Bhuiyan, Nadia. 2016. « Le lean en développement de produits appliquée à la gestion du changement d'ingénierie ». In 11th International Conference on Modeling, Optimization & Simulation (MOSIM 2016) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Travaglini, Christophe, Bescond, Christophe, Ramos Franca, Dermartonne, Kruger, Silvio E., Viens, Martin et Bélanger, Pierre. 2016. « Scattering of high order guided wave modes around a through-thickness circular hole ». In 42nd annual review of progress in quantitative nondestructive evaluation : incorporating the 6th European-American Workshop on Reliability of NDE (Minneapolis, MN, USA, July 26-31, 2015) Coll. « AIP conference proceedings », vol. 1706. AIP Publishing.

Vanga-Bouanga, Christele, Fréchette, Michel F. et David, Éric. 2016. « Electrical properties of polyaniline-based epoxy microcomposite ». In 2016 IEEE International Conference on Dielectrics (ICD) (Montpellier, France, July 03-07, 2016) pp. 322-325. Piscataway, NJ, USA : IEEE.
Compte des citations dans Scopus : 4.

Vanga-Bouanga, Christele, Fréchette, Michel F. et David, Éric. 2016. « Several fabrication techniques and characterization of the thus obtained epoxy/polyaniline composite films ». In 2016 IEEE Electrical Insulation Conference (EIC) (Montréal, QC, Canada, June 19-22, 2016) pp. 309-312. Piscataway, NJ, USA : IEEE.

Vedie, Luc, Morency, François et Kubler, Nicolas. 2016. « Sensitivity analysis of ice piece trajectory calculation ». In 8th AIAA Atmospheric and Space Environments Conference (Washington, DC, USA, June 13-17, 2016) Coll. « AIAA paper », vol. AIAA 2016-4351. Reston, VA, USA : American Institute of Aeronautics and Astronautics.
Compte des citations dans Scopus : 1.

Velázquez Salazar, Oliverio, Weiss, Julien et Morency, François. 2016. « Grid study for preliminary RANS analysis for a regional blended wing body aircraft ». In 24th Annual Conference of the CFD Society of Canada (Kelowna, BC, Canada, June 26-29,2016)

Voix, Jérémie et Murphy, William J.. 2016. « Calculation of laboratory spectrum uncertainty for various categories of hearing protectors ». In Proceedings of the INTER-NOISE 2016 : 45th International Congress and Exposition on Noise Control Engineering (Hamburg, Germany, Aug. 21-24, 2016) pp. 4690-4697. German Acoustical Society (DEGA).
Compte des citations dans Scopus : 1.

Vu, Viet Hung, Liu, Zhaoheng, Thomas, Marc, Amir, Tahvilian Masoud et Hazel, Bruce. 2016. « Identification of frequency response functions of a flexible robot as tool-holder for robotic grinding process ». In IECON 2016 : 42nd Annual Conference of IEEE Industrial Electronics Society (Florence, Italy, Oct. 24-27, 2016) pp. 6347-6352. IEEE.
Compte des citations dans Scopus : 1.

Weiss, Julien, Schwaab, Quentin, Boucetta, Yacine, Giani, Alain, Guigue, Céline, Combette, Philippe et Charlot, Benoît. 2016. « Simulation and testing of a MEMS calorimetric shear-stress sensor ». In 32nd AIAA Aerodynamic Measurement Technology and Ground Testing Conference (Washington, DC, USA, June 13-17, 2016) Coll. « AIAA paper », vol. AIAA 2016-4033. Reston, VA, USA : American Institute of Aeronautics and Astronautics.

Xu, Zhiqiang, Guo, Meng, Fréchette, Michel, David, Eric et Chen, George. 2016. « Space charge properties of LDPE-based composites with three types of POSS ». In IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Toronto, ON, Canada, Oct. 16-19, 2016) pp. 679-682. IEEE.
Compte des citations dans Scopus : 7.

Zaabar, Imen, Beauregard, Yvan et Paquet, Marc. 2016. « The impact of parts obsolescence on organization’s performances: a case study in the aeronautic industry ». In 11th International Conference on Modeling, Optimization & Simulation (MOSIM 2016) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Zhu, Linbo, Bouzid, Abdel-Hakim et Hong, Jun. 2016. « Numerical and experimental study of elastic interaction in bolted flange joints ». In ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016) American Society of Mechanical Engineers (ASME).
Compte des citations dans Scopus : 3.

Zoghlami, Mariem, Jahazi, Mohammad et Songmene, Victor. 2016. « The effects of friction stir welding parameters on the characteristics of banded structure for aluminum alloys ». In 13th International Aluminium Conference (INALCO) (Naples, Italy, Sept. 21-23, 2016) Coll. « Key Engineering Materials », vol. 710. pp. 155-159. Trans Tech Publications Ltd.

Zribi, E., David, E. et Fréchette, M.. 2016. « Effect of gycidyl-POSS on the electrical and thermal properties of epoxy/CB composites ». In IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Toronto, ON, Canada, Oct. 16-19, 2016) pp. 567-570. IEEE.
Compte des citations dans Scopus : 1.

Chapitre de livre

Brailovski, V. et Terriault, P.. 2016. « Metallic porous materials for orthopedic implants: functional requirements, manufacture, characterization, and modeling ». In Reference Module in Materials Science and Materials Engineering. Elsevier.

Dang, D.-D. et Pham, X.-T.. 2016. « Numerical analysis of turbulent convective heat transfer in a rotor-stator configuration ». In Mathematical and Computational Approaches in Advancing Modern Science and Engineering. pp. 413-424. Springer International Publishing.

Article de revue ou de magazine, non révisé par les pairs

Facchinello, Yann, Brummund, Martin, Mac-Thiong, Jean-Marc, Petit, Yvan et Brailovski, Vladimir. 22 août 2016. « Optimiser les implants vertébraux par modélisation ». [Article de recherche]. Substance ÉTS.

Facchinello, Yann, Brummund, Martin, Mac-Thiong, Jean-Marc, Petit, Yvan et Brailovski, Vladimir. 22 août 2016. « Optimizing Spinal Implants through Modeling ». [Article de recherche]. Substance ÉTS.

Jetté, Bruno, Letenneur, Morgan, Samoilenko, Mykhalio et Brailovski, Vladimir. 7 juin 2016. « Making the Most of Additive Manufacturing: Facing the Challenge ». [Article de recherche]. Substance ÉTS.

Jetté, Bruno, Letenneur, Morgan, Samoilenko, Mykhalio et Brailovski, Vladimir. 7 juin 2016. « Tirer profit de la fabrication additive : un défi à relever ». [Article de recherche]. Substance ÉTS.

Poulin, Jean-René, Barry, David et Brailovski, Vladimir. 14 octobre 2016. « Additive Manufacturing of Argon 18’s Olympic Race Bike Stem ». [Article de recherche]. Substance ÉTS.

Poulin, Jean-René, Barry, David et Brailovski, Vladimir. 14 octobre 2016. « Fabrication additive d’une potence pour un vélo olympique d’Argon 18 ». [Article de recherche]. Substance ÉTS.

Rousse, Daniel R.. 23 février 2016. « Le Groupe t3e : le passé, le présent et quelques futurs possibles ». [Article de recherche]. Substance ÉTS.

Rousse, Daniel R.. 23 février 2016. « The T3e Group: Past, Present, and Foreseeable Future ». [Article de recherche]. Substance ÉTS.

Voix, Jérémie. 2016. « Appel à l'action… encore! ». [Éditorial]. Canadian Acoustics = Acoustique Canadienne, vol. 44, nº 1. p. 3.

Voix, Jérémie. 2016. « Encore un appel à l'action ... ». [Éditorial]. Canadian Acoustics = Acoustique Canadienne, vol. 44, nº 4. pp. 2-3.

Yakhya, Saleh et Morency, François. 13 octobre 2016. « Impinging Spray Technique for Ground Deicing ». [Article de recherche]. Substance ÉTS.

Yakhya, Saleh et Morency, François. 13 octobre 2016. « Technique du jet impactant pour le dégivrage au sol ». [Article de recherche]. Substance ÉTS.

Affiche

Alinejad, Yasaman, Zehtabi, Fatemeh et Lerouge, Sophie. 2016. « Injectable thermosensitive chitosan/chondroitin sulfate hydrogels for intervertebral disc regeneration ». Affiche numéro P.0523 présentée lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016).

Al-Sayed, Chady, Vinches, Ludwig et Hallé, Stéphane. 2016. « Développement d'une veste de refroidissement individuelle adaptée au travail en mines profondes ». Affiche présentée lors de la conférence : 38e Congrès de l'AQHSST (Shawinigan, QC, Canada, 18-20 mai, 2016).

Boespflug, Gaël, Maire, Marion, De la Torre Torres, Jessica, De Crescenzo, Gregory, Lerouge, Sophie et Wertheimer, Michael R.. 2016. « Chemical aspects of cell adhesion and -growth for vascular grafts ». Affiche numéro P.2866 présentée lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016).

Bouserhal, Rachel, MacDonald, Ewen, Falk, Tiago et Voix, Jérémie. 2016. « The effect of occluding the ear on variations in voice level and fundamental frequency with changing background noise level and talker-to-listener distance : a pilot study ». Affiche présentée lors de la conférence : ARO MidWinter Meeting (San Diego, CA, USA, Feb. 20-24, 2016).

Carioli, J., Aidin, D., Zednik, R. J. et Voix, J.. 2016. « Conception et modélisation d’un dispositif intra-auriculaire pour récupérer l’énergie de déformation du conduit auditif causée par les mouvements de la mâchoire ». Affiche présentée lors de la conférence : Réseau ÉDUQ (Québec, QC, Canada, 22 août 2016).

Castro Ruiz, C., Bégin, D., Drolet, D., Debia, M., Halle, S. et Chouchen, W.. 2016. « Improving the accuracy of the well-mixed room model used in IH mod for the estimation of exposures to aqueous solvents ». Affiche numéro SR-402-08 présentée lors de la conférence : American Industrial Hygiene Conference & Exposition (Baltimore, MD, USA, May 21-26, 2016).

Deguenon-Noudomin, Arnaud, Ceccaldi, Caroline, Zehtabi, Fatemeh, Soulez, Gilles, Tang, An et Lerouge, Sophie. 2016. « Radiopaque and MRI-visible embolizing agents for vascular applications ». Affiche numéro P.2156 présentée lors de la conférence : 10th World Biomaterials Congress (WBC) (Montreal, QC, Canada, May 17-22, 2016).

Diop, I., Nadeau, S. et Emami-Mehrgani, B.. 2016. « Intégration du cadenassage à la planification de la production et de la maintenance ». Affiche présentée lors de la conférence : 38e congrès de l'AQHSST : comportements sécuritaires, les tiens, les miens, les nôtres (Shawinigan, QC, Canada, 18-20 mai 2016).

Dumas, Mathieu, Terriault, Patrick et Brailovski, Vladimir. 2016. « Modeling and simulation of porous structures for load-bearing implants ». Affiche numéro P.0892 présentée lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016).

Fareh, F. et Demers, V.. 2016. « Rheological behavior of Inconel 718 feedstocks used in low-pressure powder injection molding ». Affiche présentée lors de la conférence : ASM-Montréal : Soirée des étudiants (Montréal, QC, Canada, 9 mars 2016).

Helal, Emna, Pottier, C., Bouanga, C. V., David, E., Fréchette, M. et Demarquette, N. R.. 2016. « Effect of blending with styrenic thermoplastic elastomer on dielectric performance of polyethylene/ZnO and maleated polyethylene/ZnO nanocomposites ». Affiche numéro NDIEL-P3-2 présentée lors de la conférence : XIII International conference on nanostructured materials : Nano 2016 (Québec, QC, Canada, Aug 07-12, 2016).

Lafreniere, Jerome, Brailovski, Vladimir, Timercan, Anatolie, Poirier, Michel et Wagnac, Éric. 2016. « Manufacturability of custom endosteal dental implants by selective laser melting ». Affiche présentée lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016).

Lamarre, S., Demers, V. et Chatelain, J. F.. 2016. « Moldability of feedstock for LPIM ». Affiche présentée lors de la conférence : ASM-Montréal : Soirée des étudiants (Montréal, QC, Canada, 9 mars 2016).

Lezzoum, Narimene, Gagnon, Ghyslain et Voix, Jérémie. 2016. « The smart hearing protection device : system evaluation ». Affiche présentée lors de la conférence : National Hearing Conservation Association Conference (San Diego, CA, USA, Feb. 18-20, 2016).

Lussier, Bertrand, Brailovski, Vladimir, Petit, Yvan, Lecoq, Thomas, Brummund, Martin, Timercan, Anatolie et Séguin, Bernard. 2016. « Novel limb sparing technique using customized 3D printed patient-specific endoprostheses for tumors of the distal radius ». Affiche numéro 24 présentée lors de la conférence : ACVS Surgery Summit (Seattle, WA, USA, Oct. 05-08, 2016).

Martin, Alexis et Voix, Jérémie. 2016. « Développement d’une méthode d’identification des biosignaux dans l’oreille occluse ». Affiche présentée lors de la conférence : 38e congrès de l'AQHSST (Shawinigan, QC, Canada, 18-20 mai 2016).

Nadon, Vincent et Voix, Jérémie. 2016. « Development of a continuous hearing health monitoring system ». Affiche présentée lors de la conférence : Listen Up! : first European Conservation Conference (Manchester, UK, March 2, 2016).

Nélisse, Hugues, Le Cocq, Cécile, Boutin, Jérôme, Laville, Frédéric et Voix, Jérémie. 2016. « Attenuation of hearing protectors: A systematic comparison of subjective and objective measurement methods ». Affiche présentée lors de la conférence : 171st meeting of the Acoustical Society of America (Salt Lake City, UT, USA, May 23-27, 2016).

Ngô, V. T. M., Nadeau, S. et Hallé, S.. 2016. « Veste de refroidissement adaptée au travail en mines ultra-profondes, critères ergonomiques ». Affiche présentée lors de la conférence : 38e congrès de l'AQHSST : comportements sécuritaires, les tiens, les miens, les nôtres (Shawinigan, QC, Canada, 18-20 mai 2016).

Patte, C., Khosravi, G. et Morency, F.. 2016. « Acoustic study to characterize the Southwest district of Montreal ». Affiche présentée lors de la conférence : Gesellschaft für Arbeitswissenschaft (Aachen, Germany, Mar. 02-04, 2016).

Quevedo Gonzalez, Fernando, Vanderesse, Nicolas, Barraud, Anthony, Bocher, Philippe et Nuño, Natalia. 2016. « Prediction and measurement of apparent elastic moduli in porous additive manufactured materials for new generation of hip implants ». Affiche présentée lors de la conférence : 10th World Biomaterials Congress (Montreal, QC, Canada, May 17-22, 2016).

Savoji, Houman, Maire, Marion, Lequoy, Pauline, Liberelle, Benoît, de Crescenzo, Gregory, Wertheimer, Michael R., Ajji, Abdellah et Lerouge, Sophie. 2016. « Chondroitin sulfate-oriented epidermal growth factor (EGF) coating for random and aligned electrospun vascular grafts ». Affiche numéro P.2214 présentée lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016).

Simoneau, Charles, Terriault, Patrick et Brailovski, Vladimir. 2016. « Stochastic porous metallic structures for biomedical application: mesoscale modeling, manufacturing and testing ». Affiche numéro P.0927 présentée lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016).

Sta, Marwa, Aguiar, Graziele, de Fàtima Medeiros, Simone, Santos, Amilton et Demarquette, Nicole R.. 2016. « Coaxial electrospinning of poly(N-vinylcaprolactam) for drug delivery applications ». Affiche présentée lors de la conférence : 10th World Biomaterials Congress (Montreal, QC, Canada, May 17-22, 2016).

Tran Anh, Tung, Pirondelli, Andrea, Fréchette, Michel, David, Éric, Ouellet-Plamondon, Claudiane et Fabiani, Davide. 2016. « Enhancement of the thermal and electrical properties of LDPE by graphene fillers ». Affiche numéro NDIEL-P3-4 présentée lors de la conférence : XIII International Conference on Nanostructured Materials (NANO) (Québec, QC, Canada, Aug. 7-12, 2016).

Vinches, Ludwig, Tami, Amina et Hallé, Stéphane. 2016. « Evaluation of chemical protective garment seams and zipper for resistance to airborne nanoparticles ». Affiche présentée lors de la conférence : Fifth International conference Nanosafe (Grenoble, France, Nov. 7-10, 2016).

Communication

Al Sayed, Chady, Vinches, Ludwig et Hallé, Stéphane. 2016. « Aider les travailleurs à supporter les contraintes thermiques extrêmes ». Communication lors de la conférence : 38e congrès de l'AQHSST : comportements sécuritaires, les tiens, les miens, les nôtres (Shawinigan, QC, Canada, 18-20 mai 2016).

Arfaoui, Mohamed Ameur, Dolez, Patricia I., Dubé, Martine et David, Éric. 2016. « Preparation of hydrophobic nonwoven using recycled jute fibre and a titanium dioxide/fatty acid coating ». Communication lors de la conférence : 2nd World Congress and Expo on Recycling (Berlin, Germany, July 25-27, 2016).

Arnoux, P. J., Petit, Y., Callot, V. et Aubin, C. E.. 2016. « Computer modelling of the spine to support next generation of prevention and intervention injuries and pathologies ». Communication lors de la conférence : 14th International Symposium on Computer Methods in Biomechanics and Biomedical Modelling (Tel Aviv, Israël, Sept. 20-22, 2016).

Arteau, Jean. 2016. « Impacts et retombées des recherches menées sur la protection contre les chutes de hauteur ». Communication lors de la conférence : Conférence scientifique de l'ÉREST (Montréal, QC, Canada, 14 jan. 2016).

Arteau, Jean. 2016. « Les normes dans la réglementation en SST ». Communication lors de la conférence : 8e édition du P'tit Rendez-vous en santé et sécurité du travail (SST) (Montréal, QC, Canada, 20 avr. 2016).

Bhérer, Luc, Cloutier, Yves, Marchand, Geneviève, Hallé, Stéphane et Lavoie, Jacques. 2016. « La gestion du risque infectieux lors des soins funéraires ». Communication lors de la conférence : Corporation des thanatologues du Québec (Québec , QC, Canada, 13 avril 2016).

Boespflug, G., Maire, M., De Crescenzo, G., Lerouge, S. et Wertheimer, Michael R.. 2016. « Chemical aspects of endothelial cell adhesion and growth for vascular grafts ». Communication lors de la conférence : 6th International Conference on Plasma Medicine (Bratislava, Slovakia, Sept. 04-09, 2016).

Bouserhal, Rachel, Falk, Tiago, MacDonald N., Ewen et Voix, Jérémie. 2016. « The effect of occluding the ear on variations in voice level and fundamental frequency with changing background noise level and talker-to-listener distance : a pilot study ». Communication lors de la conférence : National Hearing Conservation Association Conference (San Diego, CA, USA, Feb. 18-20, 2016).

Bouserhal, Rachel, MacDonald, Ewen, Falk, Tiago et Voix, Jérémie. 2016. « The effect of occluding the ear on variations in voice level and fundamental frequency with changing background noise level and talker-to-listener distance : a pilot study ». Communication lors de la conférence : ARO MidWinter Meeting (San Diego, CA, USA, Feb. 20-24, 2016).

Boussaboun, Zakariae, Ouellet-Plamondon, Claudiane et David, Éric. 2016. « Effect of drying and carbon on clay conductivity ». Communication lors de la conférence : XIII International Conference on Nanostructured Materials (NANO 2016) (Québec, QC, Canada, Aug. 07-12, 2016).

Busch, Daniel, Nadeau, Sylvie et Morency, François. 2016. « Vers une estimation du risque de lésions musculo-squelettiques dans le dégivrage des avions ». Communication lors de la conférence : 38e congrès de l'AQHSST : comportements sécuritaires, les tiens, les miens, les nôtres (Shawinigan, QC, Canada, 18-20 mai 2016).

Carioli, Johan, Voix, Jérémie et Zednik, Ricardo. 2016. « Récupéreration de l’énergie de déformation du conduit auditif causée par les mouvements de la mâchoire ». Communication lors de la conférence : Réseau ÉDUQ (Québec, QC, Canada, 22 août 2016).

Ceccaldi, Caroline, Monette, Anne, Assad, Elias, Lapointe, Réjean et Lerouge, Sophie. 2016. « Injectable chitosan thermogels adapted for cytotoxic T lymphocytes immunotherapy ». Communication lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016).

Ceccaldi, Caroline, Samei, Sepideh, Alinejad, Yasaman, Bucionyte, Medeine, Cerruti, Marta et Lerouge, Sophie. 2016. « Optimization of injectable scaffolds with enhanced mechanical properties for cell therapy and tissue engineering ». Communication lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016).

Ceccaldi, Caroline, Strandman, Satu, Hui, Eve, Montagnon, Emmanuel, Schmitt, Cedric, Henni, Anis Hadj et Lerouge, Sophie. 2016. « Long-term viscoelasticity monitoring of enzymatic degradation of chitosan scaffolds ». Communication lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016).

Demarquette, N. R., Zednik, R. J., Santos, A. M. et Adams, P. W.. 2016. « Control of morphology and hydrophilicity of electrospun membranes ». Communication lors de la conférence : 1er Forum Franco-Québécois d'Innovation en Santé (Montréal, QC, Canada, 11-12 Oct. 2016).

Demarquette, Nicole R., Gonçalev, Leice A., Helal, Emna, Ramos, Rogerio, Carastan, Danilo J., David, Éric et Fréchette, Michel. 2016. « Tayloring of dielectric and mechanical properties of nanocomposites of block copolymers through morphology control ». Communication lors de la conférence : XVIIth International Congress on Rheology (Kyoto, Japan, Aug. 08-13, 2016).

Diotalevi, L., Petit, Y., Brailovski, V., Nichols, S., Marhionatti, E. et Wagnac, E.. 2016. « Conception d'une prothèse innovante pour stabiliser le genou (grasset) bovin adulte suite à une rupture du ligament croisé cranial (LCC) ». Communication lors de la conférence : 36e Journée de la Recherche du POES et de la Division d'Orthopédie de l'Université de Montréal (Montréal, QC, Canada, 12 mai 2016).

Doré, Sylvie. 2016. « Ce que des finissants universitaires disent à propos de leur engagement envers leurs études ». Communication lors de la conférence : 29ème Congrès de l’AIPU : Les Valeurs dans l’Enseignement Supérieur (Lausanne, Suisse, 06-09 juin, 2016).

Fournely, Marion, Petit, Yvan, Wagnac, Eric, Callot, Virginie et Arnoux, Pierre-Jean. 2016. « Assessment of the reliability of a spinal cord contusion injury devic ». Communication lors de la conférence : 22nd Congress of the European Society of Biomechanics (Lyon, France, July 10-13, 2016).

Gauvin, Chantal, Tuduri, Ludovic, Triki, Ennouri, Vu-Khanh, Toan, Wojdyla, Guillaume et Nguyen-Tri, Phuong. 2016. « Les gants conservent-ils leur résistance mécanique suite à leur utilisation dans un milieu de travail exposé aux fluides de coupe? ». Communication lors de la conférence : 38e congrès de l’AQHSST (Shawinigan, QC, Canada, 18-20 mai 2016).

Genoyer, Julie, Yee, Marcio, Soulestin, Jérémie et Demarquette, Nicole R.. 2016. « Effect of the addition of organoclay on the morphology and rheological behavior of PMMA/PS blends ». Communication lors de la conférence : 32nd Polymer Processing Society Conference (Lyon, France, July 25-29, 2016).

Hagen, J., Petit, Y. et Wagnac, E.. 2016. « Influence d'une réduction ligamentaire postérieure sur l'intégrité mécanique de la moelle épinière : une analyse numérique ». Communication lors de la conférence : 36e Journée de la Recherche du POES et de la Division d'Orthopédie de l'Université de Montréal (Montréal, QC, Canada, 12 mai 2016).

Hagen, Jeremy, Wagnac, Eric, Mac-Thiong, Jean-Marc, Arnoux, Pierre-Jean et Petit, Yvan. 2016. « Influence of posterior ligamentous reduction on spinal cord integrity: A finite element analysis ». Communication lors de la conférence : 22nd Congress of the European Society of Biomechanics (Lyon, France, July 10-13, 2016).

Hallé, Stéphane, Nadeau, Sylvie, Vinches, Ludwig, Al-Sayed, Chady et Ngô, Valérie Tuyêt Mai. 2016. « Développement d’un vêtement de refroidissement individuel adapté au travail en mines profondes : évaluation des technologies existantes ». Communication lors de la conférence : Québec Mines (Québec, QC, Canada, 21-24 nov., 2016).

Helal, Emna, Demarquette, Nicole R., David, Éric et Fréchette, Michel. 2016. « Advanced block copolymer nanocomposites with tailored nanoparticles dispersion for dielectric applications ». Communication lors de la conférence : 32nd Polymer Processing Society Conference (Lyon, France, July 25-29, 2016).

Kurusu, R. et Demarquette, N.. 2016. « Effect of processing parameters on the morphology and wetting of electrospun mats ». Communication lors de la conférence : International Smart Materials & Surfaces Conference (Seoul, South Korea, Mar. 23-25, 2016).

Kurusu, Rafael et Demarquette, Nicole. 2016. « Hydrophilization of electrospun mats by blending with amphiphilic PEO-PPO-PEO copolymers ». Communication lors de la conférence : 32nd Polymer Processing Society Conference (Lyon, France, July 25-29, 2016).

Lafreniere, Jerome, Brailovski, Vladimir, Timercan, Anatolie, Poirier, Michel et Wagnac, Éric. 2016. « Manufacturability of custom endosteal dental implants by selective laser melting ». Communication lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016).

Lamontagne, Stéphanie et Doré, Sylvie. 2016. « Modèle de maturité pour l’intégration e cace de la fabrication additive (FA) dans le processus de développement de produits ». Communication lors de la conférence : 2e Conférence Annuelle du Réseau Québec-3D : Favoriser l’Utilisation de la Fabrication Additive au Québec (Boucherville, QC, Canada, 5 mai 2016).

Lerouge, Sophie. 2016. « Injectable biogel for local T cell delivery: a new approach for immunotherapy ». Communication lors de la conférence : Bioregate : European Regenerative Medicine Forum (Nantes, France, Sept. 08-09, 2016).

Lezzoum, Narimene, Gagnon, Ghyslain et Voix, Jérémie. 2016. « The smart hearing protection device : system evaluation ». Communication lors de la conférence : National Hearing Conservation Association Conference (San Diego, CA, USA, Feb. 18-20, 2016).

Liu, Zhaoheng. 2016. « Research work on robotic grinding for in-situ repairs and maintenance of hydroelectric equipment ». Communication lors de la conférence : Department of Mechanical and Manufacturing Engineering, Aalborg University (Aalborg, Denmark, Aug. 12, 2016).

Martin, Alexis et Voix, Jérémie. 2016. « Développement d’une méthode d’identification des biosignaux dans l’oreille occluse ». Communication lors de la conférence : 38e congrès de l'AQHSST (Shawinigan, QC, Canada, 18-20 mai 2016).

Moulins, Anthony, Swain, Mitasha, Demarquette Nicole, R. et Zednik, Ricardo. 2016. « Influence of electrospinning process parameters on the structure and morphology of smart polymer fibers made of Poly(Vinylidene Fluoride) ». Communication lors de la conférence : SLAP 2016 : XV Simposio Latinoamericano de Polímeros and XIII Congreso Iberoamericano de Polímeros and XXIX Congreso Nacional de la S.P.M. (Cancun, Mexico, Oct. 23-27, 2016).

Nadeau, Sylvie et Morency, François. 2016. « Dégivrer des avions au sol : une activité méconnue et pourtant essentielle ». Communication lors de la conférence : Journées santé, sécurité et mieux-être de l'ÉTS (Montréal, QC, Canada, 12 mai 2016).

Nadeau, Sylvie et Morency, François. 2016. « Membres chercheurs – universitaires: Comment les apprivoiser? ». Communication lors de la conférence : 38e congrès de l'AQHSST : comportements sécuritaires, les tiens, les miens, les nôtres (Shawinigan, QC, Canada, 18-20 mai 2016).

Nadon, Vincent, Bockstael, Annelies, Botteldooren, Dick et Voix, Jérémie. 2016. « Field monitoring of otoacoustic emissions during noise exposure : preliminary results in controlled environment ». Communication lors de la conférence : Hearing Across the Lifespan (HeAL 2016) (Cernobbio, Italy, June 2-4, 2016).

Nadon, Vincent, Bockstael, Annelies, Botteldooren, Dick et Voix, Jérémie. 2016. « Individual dose-response relationship evaluated through otoacoustic emission measurements in controlled noise exposure: a pilot study ». Communication lors de la conférence : 33rd World Congress of Audiology : Bringing the World of Audiology Together (Vancouver, BC, Canada, Sept. 18-21, 2016).

Nadon, Vincent et Voix, Jérémie. 2016. « Development of a continuous hearing health monitoring system ». Communication lors de la conférence : Listen Up! : first European Conservation Conference (Manchester, UK, March 2, 2016).

Ngô, Anh Dung. 2016. « Simulation of process cycle time and tooling cost for carbon fibre reinforced thermoplastic composites compression moulded parts ». Communication lors de la conférence : 7th International Conference on Mechanical and Aerospace Engineering (ICPAM) (London, UK, July 18-20, 2016).

Ngô, V., Nadeau, S. et Hallé, S.. 2016. « Facteurs humains appliqués au développement d’une veste refroidissante ». Communication lors de la conférence : Conférence mensuelles en sécurité du travail et contrôle des risques industriels, ÉREST, ÉTS, AQHSST (Montréal, QC, Canada, 16 juin 2016).

Nguyen, Thi Hong Dang et Dao, Thien My. 2016. « Optimization strategy of supply chain design using hybrid meta-heuristics approach in context of multi-suppliers ». Communication lors de la conférence : 5th International Conference on Engineering Optimization (Igassu Falls, Brazil, June 19-23, 2016).

Petit, Y., Ménard, J., Levasseur, A. et Fernandes, J.. 2016. « Improving acetabular reaming quality for total hip arthroplasty using a serrated blade reamer ». Communication lors de la conférence : 14th International Symposium on Computer Methods in Biomechanics and Biomedical Modelling (Tel Aviv, Israël, Sept. 20-22, 2016).

Pham, X. T., Vu, N. H., François, V. et Cuillière, J. -C.. 2016. « Modeling and numerical simulation of multi-layered fiber-reinforced materials applied for non-rigid parts deformation during assembly process ». Communication lors de la conférence : 7e colloque québécois sur le développement numérique de produits (CAO/FAO) (Montréal, QC, Canada, 4 mai 2016).

Sattarpanah Karganroudi, Sasan, Cuillière, Jean-Christophe, François, Vincent et Tahan, Souheil-Antoine. 2016. « Modeling and numerical simulation of multi-layered fiber-reinforced materials applied for non-rigid parts deformation during assembly process ». Communication lors de la conférence : 7e colloque québécois sur le développement numérique de produits (CAO/FAO) (Montréal, QC, Canada, 4 mai 2016).

Sergent, A., Ménard, J., Petit, Y., Laflamme, G. Y. et Rouleau, D. M.. 2016. « Localisation quantitative du point d'entrée de l'artère circonflexe humérale antérieure : une étude radiologique de haute définition, par CT-scan. ». Communication lors de la conférence : 36e Journée de la Recherche du POES et de la Division d'Orthopédie de l'Université de Montréal (Montréal, QC, Canada, 12 mai 2016).

Shahriari, D., Loucif, A., Harris, N., Bouissa, Y., Jahazi, M., Lapierre-Boire, L. P. et Poulain, N.. 2016. « Comprehensive simulation of solidification, forging and heat treatment process of large size high strength steel ingots ». Communication lors de la conférence : The 31st Forging Industry Technical Conference (Colombus, OH, USA, Sept. 19-20, 2016).

Silva de Lima, Carlos Alberto, Amurin, Leice G., David, Éric et Demarquette, Nicole R.. 2016. « Rheological and electrical properties of SEBS/MWCNT nanocomposites ». Communication lors de la conférence : 32nd Polymer Processing Society Conference (Lyon, France, July 25-29, 2016).

Soliman, H. A. G., Mac-Thiong, J. M., Levasseur, A., Parent, S. et Petit, Y.. 2016. « Évaluation de la densité osseuse des vertèbres fracturées par CT-scan ». Communication lors de la conférence : 36e Journée de la Recherche du POES et de la Division d'Orthopédie de l'Université de Montréal (Montréal, QC, Canada, 12 mai 2016).

Sta, Marwa, Aguiar, Graziele, de Fatimà Medeiros, Simone, Santos, Amilton M. et Demarquette, Nicole R.. 2016. « Electrospinning of Poly(N-vinylcaprolactam)/polycaprolactone blend for drug delivery applications ». Communication lors de la conférence : 32nd Polymer Processing Society Conference (Lyon, France, July 25-29, 2016).

Villarreal-Lucio, D. Samantha, Martinez-Hernandez, Ana L., Velasco-Santos, Carlos, Rivera-Aarmenta, J. Luis, Zednik, Ricardo et Estrada-Moreno, Ivan A.. 2016. « Mechanical and thermal evaluation of composites from PP-nano CaCO3 particles obtained from eggshell ». Communication lors de la conférence : XXV International Materials Research Congress (IMRC) (Cancun, Mexico, Aug. 14-19, 2016).

Vinches, Ludwig, Zemzem, Mohamed, Hallé, Stéphane, Peyrot, Caroline, Wilkinson, Kevin J. et Tufenkji, Nathalie. 2016. « A rigorous protocol for evaluating the effectiveness of gloves against nanoparticles in solution ». Communication lors de la conférence : Fifth International conference Nanosafe (Grenoble, France, Nov. 7-10, 2016).

Voix, Jérémie. 2016. « In-ear wearable technologies and musical applications ». Communication lors de la conférence : Hearing Seminar at Standford University (Stanford, CA, USA, Feb. 23, 2016).

Voix, Jérémie. 2016. « Individual dose-response relationship evaluated through otoacoustic emission measurements in controlled noise exposure : a pilot study ». Communication lors de la conférence : XXXIII World Congress of Audiology (Vancouver, BC, Canada, Sept. 18-21, 2016).

Voix, Jérémie. 2016. « L’oreille bionique ». Communication lors de la conférence : Les Beaux-midis de l'Université de Montréal (Montréal, QC, Canada, 12 oct. 2016).

Wu, Qinghua, Maire, Marion, Lerouge, Sophie, Therriault, Daniel et Heuzey, Marie-Claude. 2016. « Solvent-cast 3D printing of chitosan hydrogel scaffolds for guided cell growth ». Communication lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016).

Zednik, R. J., Demarquette, N., Moulins, A., Chanbi, Z. et Sta, M.. 2016. « Piezoelectric polymer nanofibers by electrospinning ». Communication lors de la conférence : CREPEC Annual Colloquium (Montreal, QC, Canada, Dec. 07, 2016).

Zoghlami, Mariem, Monajati, Hossein, Jahazi, Mohammad et Songmene, Victor. 2016. « Microstructural analysis of banded structure in friction stir welding of AA6082 aluminum alloy ». Communication lors de la conférence : 34th International Conference and Exhibition of ICSOBA (the International Committee for Study of Bauxite, Alumina & Aluminium) (Québec, QC, Canada, Oct. 03-06, 2016).

Rapport technique

Arrieta, Carlos, Lan, André, Nguyen-Tri, Phuong et Vu-Khanh, Toan. 2016. « Étude sur le vieillissement, la dégradation et la durée de vie des équipements de protection contre les chutes - cordes d’assurance ». Coll. « Études et recherches », vol. R-925. IRSST. 100 p.

Lortie, Monique, Nadeau, Sylvie et Vezeau, Steve. 2016. « Solutions visant l’amélioration des conditions de santé et de sécurité des poseurs de revêtements de sol ». Coll. « Études et recherches », vol. R-900. Montréal : IRSST. 77 p.

Sgard, Franck, Nélisse, Hugues, Laville, Frédéric, Petit, Yvan, Doutres, Olivier, Voix, Jérémie, Brummund, Martin, Viallet, Guilhem, Boyer, Sylvain, Gaudreau, Marc-André, Boutin, Jérôme et Le Cocq, Cécile. 2016. « Développement d'outils et de méthodes pour mieux évaluer et améliorer la protection auditive individuelle des travailleurs ». Coll. « Études et recherches », vol. R-901. IRSST. 112 p.

Triki, Ennouri, Nguyen-Tri, Phuong, Azaiez, Meriam, Vu-Khanh, Toan et Gauvin, Chantal. 2016. « Résistance des matériaux de protection aux agresseurs mécaniques multiples : coupure et perforation simultanées ». Coll. « Études et recherches », vol. R-903. IRSST. 100 p.

Vinches, Ludwig, Zemzem, Mohamed, Hallé, Stéphane, Peyrot, Caroline, Wilkinson, Kevin J. et Tufenkji, Nathalie. 2016. « Mesure de l’efficacité des gants de protection contre les nanoparticules dans des conditions simulant leur utilisation en milieu de travail ». Coll. « Études et recherches », vol. R-933. Montréal, Québec : Institut de recherche Robert-Sauvé en santé et en sécurité du travail (IRSST). 64 p.

Brevet

Delnavaz, Aidin et Voix, Jérémie (inventeurs) 8 mars 2016. « Energy harvester device for in-ear devices using ear canal dynamic motion ». Delnavaz, Aidin, Voix, Jérémie (titulaire(s)). Brevet américain US 9,281,764.

Petit, Yvan, Laflamme, Georges Yves et Bourgeois, Yan (inventeurs) 19 janvier 2016. « Composant et methode de fixation orthopedique ». Valorisation recherche hôpital Sacré-Coeur de Montréal, École de technologie supérieure (titulaire(s)). Brevet canadien CA 2643678. [Titre traduit: Orthopaedic Fixation Component and Method].

Cette liste a été générée le Thu Mar 28 01:48:22 2024 EDT.