Liste des publications de "Joncas, Simon"

Beauchamp, Marc-André, Joncas, Simon et Bersee, Harald E. N.. 2010. « Vacuum infused anionic polyamide-6 composites : the development of a recycling strategy ». In SAMPE 2010 Conference and Exhibition "New Materials and Processes for a New Economy" (Seattle, WA, United states, May 17-20, 2010) Coll. « International SAMPE Symposium and Exhibition (Proceedings) » Covina, CA, United States : Society for the Advancement of Material and Process Engineering.

Brassard, David, Cormier, Laurent et Joncas, Simon. 2011. « A study on northern climate effects on fatigue life of composites for wind turbines ». In SAMPE Spring Technical Conference and Exhibition - State of the Industry: Advanced Materials, Applications, and Processing Technology (Long Beach, CA, USA, May 23-26, 2011) Covina, CA, USA : Society for the Advancement of Material and Process Engineering.

Charron, J-F., Teuwen, J., Joncas, Simon, Bersee, Harald E. N. et Champliaud, Henri. 2009. « Vacuum infused anionic polyamide-6 composites : a comparison study between different mould heating strategies ». In 24th Annual Technical Conference of the American Society for Composites and 1st Joint Canadian-American Technical Conference on Composites (Newark, DE, USA, Sept. 15-17, 2009) pp. 931-946. DEStech Publications, Inc..

Cormier, Laurent et Joncas, Simon. 2010. « Effects of cold temperature, moisture and freeze-thaw cycles on the mechanical properties of unidirectional glass fiber-epoxy composites ». In 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (Orlando, FL, United states, April 12-15, 2010) Reston, VA : American Institute of Aeronautics and Astronautics Inc..
Compte des citations dans Scopus : 16.

Cormier, Laurent et Joncas, Simon. 2018. « Modelling the effect of temperature on the probabilistic stress–life fatigue diagram of glass fibre–polymer composites loaded in tension along the fibre direction ». Journal of Composite Materials, vol. 52, nº 2. pp. 207-224.
Compte des citations dans Scopus : 3.

Cormier, Laurent et Joncas, Simon. 2018. « Modelling the storage modulus, transition temperatures and timetemperature superposition characteristics of epoxies and their composites ». Journal of Thermal Analysis and Calorimetry, vol. 131, nº 3. pp. 2589-2601.
Compte des citations dans Scopus : 6.

Cormier, Laurent, Joncas, Simon et Nijssen, Rogier P. L.. 2016. « Effects of low temperature on the mechanical properties of glass fibre-epoxy composites: Static tension, compression, R = 0.1 and R =- 1 fatigue of ±45 laminates ». Wind Energy, vol. 19, nº 6. pp. 1023-1041.
Compte des citations dans Scopus : 18.

Dubé, François, Belleau, Christian et Joncas, Simon. 2013. « Control of a 10 kW wind turbine variable pitch system under operating conditions ». In 21ème Congrès français de mécanique 2013 : du 26 au 30 août 2013 Bordeaux (Bordeaux, France, Aug. 26-30, 2013) Paris, France : Association Française de Mécanique.

Forcier, L-C., Sumner, J., Gagnon, T., Charron, J-F. et Joncas, S.. 2013. « Structural design and validation of a 10 kW wind turbine blade ». In Proceedings of the 19th International Conference on Composite Materials-ICCM19 (Montreal, QC, Canada, July 28-Aug. 2, 2013)
Compte des citations dans Scopus : 3.

Forcier, Louis-Charles et Joncas, Simon. 2022. « Comparison of wind turbine blade structural models of different levels of complexity against experimental data ». Journal of Renewable and Sustainable Energy, vol. 14, nº 4.
Compte des citations dans Scopus : 3.

Forcier, Louis-Charles et Joncas, Simon. 2022. « Development of a cross-sectional finite element for the analysis of thin-walled composite beams like wind turbine blades ». Wind Engineering, vol. 47, nº 1. pp. 157-174.

Forcier, Louis-Charles et Joncas, Simon. 2012. « Development of a structural optimization strategy for the design of next generation large thermoplastic wind turbine blades ». Structural and Multidisciplinary Optimization, vol. 45, nº 6. pp. 889-906.
Compte des citations dans Scopus : 29.

Forcier, Louis-Charles et Joncas, Simon. 2010. « New structural design concepts for large thermoplastic wind turbine blades using structural optimization techniques ». In 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (Orlando, FL, United states, April 12-15, 2010) Reston, VA : American Institute of Aeronautics and Astronautics Inc..
Compte des citations dans Scopus : 9.

Forcier, Louis-Charles et Joncas, Simon. 2020. « On the wind turbine blade loads from an aeroelastic simulation and their transfer to a three-dimensional finite element model of the blade ». Wind Engineering, vol. 44, nº 6. pp. 577-595.
Compte des citations dans Scopus : 5.

Gnonhoue, O. G., Velazquez-Salazar, A., Millard, L., Joncas, S., David, É., Cormier, L., Poudret, R. et Preda, I.. 2020. « Characterization of dielectric walls of capacitors ». In IEEE 3rd International Conference on Dielectrics (ICD) (Valencia, Spain, July 05-31, 2020) pp. 653-656. IEEE.
Compte des citations dans Scopus : 3.

Hai, Zhang, Fernandes, Henrique, Lingyao, Yu, Hassler, Ulf, Genest, Marc, Robitaille, François, Joncas, Simon, Yunlong, Sheng et Maldague, Xavier. 2016. « A comparative study of experimental and finite element analysis on submillimeter flaws by laser and ultrasonic excited thermography ». In Thermosense: Thermal Infrared Applications XXXVIII (Baltimore, MD, USA, Apr. 18-21, 2016) Coll. « Proceedings of SPIE », vol. 9861. USA : SPIE.
Compte des citations dans Scopus : 6.

Hai, Zhang, Genest, Marc, Robitaille, François, Maldague, Xavier, West, Lucas, Joncas, Simon et Leduc, Catherine. 2015. « Infrared thermography, ultrasound C-scan and microscope for non-destructive and destructive evaluation of 3D carbon fiber materials: a comparative study ». In Thermosense: Thermal Infrared Applications XXXVII (Baltimore, MD, USA, Apr. 20-23, 2015) Coll. « Proceedings of SPIE », vol. 9485. USA : SPIE.
Compte des citations dans Scopus : 10.

Joncas, S., Pappas, G., Botsis, J. et Michaud, V.. 2017. « Interlaminar fracture in tufted composites: Effects of tuft geometry and surface density ». In 10th Canadian-International Conference on Composites : Advanced Composites in Addressing Global Challenges of the 21st Century (Ottawa, ON, Canada, July 17-20, 2017)

Joncas, Simon. 2014. « COMP-501 - Préformes textiles 3D pour la fabrication de pièces composites complexes ». Communication lors de la conférence : Conférence/Expo HighTex (Montréal, QC, Canada, 18-20 mars 2014).

Joncas, Simon. 2006. « Design and manufacturing considerations for large thermoplastic composite wind turbine blades ». Communication lors de la conférence : Society for the Advancement of Material & Process Engineering - Eastern Canada Chapter meetings (Montreal, QC, Canada, Mar. 2006).

Joncas, Simon. 2012. « Développement, fabrication et mise en service de la petite éolienne WESNet (10kW) ». Communication lors de la conférence : 6e Colloque de l'Industrie Éolienne Québécois (Carleton-sur-mer, QC, Canada, 19 juin 2012).

Joncas, Simon. 2005. « MW-size thermoplastic composite wind turbine blades - Part 2 : manufacturing Issues ». Communication lors de la conférence : 1st Seminar on Wind Energy in Europe (Athens, Greece, Sept. 21-23, 2005).

Joncas, Simon. 2016. « Projet COMP-501, 3D Carbon-fiber textile preforms ». Affiche présentée lors de la conférence : Forum CRIAQ 2016 (Montréal, QC, Canada, 27 avril 2016).

Joncas, Simon et Belleau, Christian. 2008. « The omer human-powered submarine team: from classroom to competition ». In Oceans (Quebec, Canada, Sept. 15-18, 2008) Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Joncas, Simon, Bergsma, Otto et Beukers, Adriaan. 2005. « Power regulation and optimization of offshore wind turbines through trailing edge flap control ». In 43rd AIAA Aerospace Sciences Meeting and Exhibit (Reno, NV, USA, Jan. 10-13, 2005) Coll. « AIAA paper » pp. 77-87. USA : American Institute of Aeronautics and Astronautics.
Compte des citations dans Scopus : 5.

Joncas, Simon, De Ruiter, Marten Jan et Van Keulen, Fred. 2004. « Preliminary design of large wind turbine blades using layout optimization techniques ». In 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference (Albany, NY, USA, Aug. 30-Sept. 1, 2004) pp. 3945-3957. USA : American Institute of Aeronautics and Astronautics.
Compte des citations dans Scopus : 18.

Joncas, Simon et Leclerc, J-S.. 2013. « Préformes textiles 3D pour la fabrication de pièces composites complexes ». Communication lors de la conférence : Comité de la recherche du CRIAQ (Consortium de recherche aérospatiale au Québec) (Montréal, QC, Canada, sept. 2013).

Joncas, Simon, Lemay, J., Bergsma, O. K., Bersee, H. E. N. et Beukers, A.. 2005. « Topography optimization for maximum buckling loads of wind turbine blade sandwich panels ». In Fifteenth International Conference on Composite Materials (ICCM-15 ): CDROM Extended Abstracts and Papers (Durban, South Africa, June 27-July 1, 2005) South Africa : Centre for Composite and Smart Materials and Structures, University of KwaZulu-Natal.

Joncas, Simon et Van Rijswijk, K.. 2005. « Large thermoplastic wind turbine blades : design and manufacturing issues ». Communication lors de la conférence : Delft University Wind Energy Research Institute Meeting (DUWIND) (Delft, Netherlands, Apr. 2005).

Joncas, Simon, Van Rijswijk, K., Charron, J.F., Bersee, H.E.N. et Beukers, A.. 2006. « Interfacial shear strength properties of vacuum-infused anionic polyamide-6 glass-fiber composites ». In 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference (Newport, RI, USA, May 1-4, 2006) Coll. « AIAA paper » pp. 7862-7869. Reston, VA, USA : American Institute of Aeronautics and Astronautics Inc..
Compte des citations dans Scopus : 1.

Joncas, Simon, Van Rijswijk, K., Thibault-Liboiron, K., Bersee, H. E. N. et Beukers, A.. 2006. « Mechanical properties of vacuum infused anionic polyamide-6 glass-fiber composites : a benchmark study ». In SAMPE Europe ; International SAMPE Europe Conference : Latest advancements of applied composite technology (Paris, France, Mar. 27-29, 2006) SAMPE.

Leduc, C., Joncas, Simon et Leclerc, J. S.. 2014. « Effect of process parameters on damage tolerance of carbon epoxy laminate preformed using one-sided stitching ». In 16th European Conference on Composite Materials, ECCM 2014 (Sevilla, Spain, June 22-26, 2014) European Conference on Composite Materials, ECCM.
Compte des citations dans Scopus : 2.

Letarte, Antoine, Joncas, Simon, Ross, Annie et Martin, Francis. 2016. « Evaluating the stiffness of conic interfacing parts : a practical method for finite element model updating based on experimental modal testing ». In 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 4-8 Jan. 2016 (San Diego, CA, USA, Jan. 4-8, 2016) Coll. « AIAA paper », vol. AIAA 2016-0203. Reston, VA, USA : American Institute of Aeronautics and Astronautics.

Letarte, Antoine, Joncas, Simon, Ross, Annie et Martin, Francis. 2015. « Evaluating the stiffness of conic interfacing parts : a practical method for finite element model updating based on experimental modal testing ». Affiche présentée lors de la conférence : Forum CREPEC (Centre de recherche sur les systèmes polymères et composites à haute performance) (Montréal, QC, Canada, dec. 2015).

Marzdashti, S. et Joncas, S.. 2022. « The effect of laminate sequences on tuft bridging in GFRP laminates under tensile loading ». In 8th International Conference on Intelligent Textiles and Mass Customisation (ITMC) (Montreal, QC, Canada, Sept. 18-21, 2022) Coll. « IOP Conference Series-Materials Science and Engineering », vol. 1266.

Michaud, Francois, Dalir, Hamid et Joncas, Simon. 2018. « Structural design and optimization of an aircraft morphing wing: Composite skin ». Journal of Aircraft, vol. 55, nº 1. pp. 195-211.
Compte des citations dans Scopus : 10.

Michaud, François, Joncas, Simon et Botez, Ruxandra. 2013. « Design, manufacturing and testing of a small-scale composite morphing wing ». In Proceedings of the 19th International Conference on Composite Materials-ICCM19 (Montreal, QC, Canada, July 28-Aug. 2, 2013) pp. 7924-7933. International Committee on Composite Materials.
Compte des citations dans Scopus : 10.

Pappas, Georgios, Joncas, Simon, Michaud, Véronique et Botsis, John. 2018. « The influence of through-thickness reinforcement geometry and pattern on delamination of fiber-reinforced composites: Part I Experimental results ». Composite Structures, vol. 184. pp. 924-934.
Compte des citations dans Scopus : 18.

Pappas, Georgios, Joncas, Simon, Michaud, Véronique et Botsis, John. 2017. « The influence of through-thickness reinforcement geometry and pattern on delamination of fiber-reinforced composites: Part II – Modeling ». Composite Structures, vol. 181. pp. 379-390.
Compte des citations dans Scopus : 13.

Van Rijswijk, K., Joncas, Simon, Bersee, H. A. N. et Bergsma, O. K.. 2005. « Vacuum infused fibre-reinforced thermoplastic MW-size turbine blades : a cost effective innovation? ». In 43rd AIAA Aerospace Sciences Meeting and Exhibit (Reno, NV, USA, Jan. 10-13, 2005) Coll. « AIAA paper » pp. 39-51. USA : American Institute of Aeronautics and Astronautics.
Compte des citations dans Scopus : 2.

Van Rijswijk, K., Joncas, Simon, Bersee, H. E. N., Bergsma, O. K. et Beukers, A. 2005. « A sustainable vaccum-infused thermoplastic composites for MW-Size wind turbine blades - preliminary design and manufacturing issues ». Journal of Solar Energy Engineering, vol. 127, nº 4. pp. 570-580.
Compte des citations dans Scopus : 30.

Van Rijswijk, K., Joncas, Simon, Bersee, H. E. N., Beukers, A. et Picken, S. J.. 2005. « Controlling the reaction rate of anionic polyamide-6 for vacuum infusion of composite wind turbine blades ». In Fifteenth International Conference on Composite Materials (ICCM-15 ): CDROM Extended Abstracts and Papers (Durban, South Africa, June 27-July 1, 2005) South Africa : Centre for Composite and Smart Materials and Structures, University of KwaZulu-Natal.

Van Rijswijk, K., Joncas, Simon, Malek, O.J.A., Bersee, H.E.N. et Beukers, A.. 2006. « Vacuum infused thermoplastic composites for wind turbine blades ». In Polymer composite materials for wind power turbines : proceedings of the 27th Risø International Symposium on Materials Science, 4 - 7 September 2006, Risø National Laboratory, Roskilde, Denmark (Roskilde, Denmark, Sept. 4-7, 2006) pp. 307-314. Roskilde : Denmark Risø National Laboratory.

Zhang, H., Fernandes, H., Genest, M., Hassler, U., Robitaille, F., Joncas, S. et Maldague, X.. 2016. « A comparative study of ultrasonic c-scan, micro-CT, infrared thermography and Terahertz NDT based on experiments and simulations of composites ». In 13th International Conference on Quantitative Infrared Thermography (Gdańsk, Poland, July 04-08, 2016) pp. 951-952. QIRT Council.

Zhang, H., Robitaille, F., Hassler, U., Joncas, S. et Maldague, X.. 2017. « Experimental analysis for the flaws caused by fiber insertion and stitching in 3D preformed T-joint carbon fiber reinforced polymer composites using X-ray micro-computed tomography ». In 10th Canadian-International Conference on Composites : Advanced Composites in Addressing Global Challenges of the 21st Century (Ottawa, ON, Canada, July 17-20, 2017)

Zhang, Hai, Fernandes, Henrique, Dizeu, Frank Billy Djupkep, Hassler, Ulf, Fleuret, Julien, Genest, Marc, Ibarra-Castanedo, Clemente, Robitaille, François, Joncas, Simon et Maldague, Xavier. 2016. « Pulsed micro-laser line thermography on submillimeter porosity in carbon fiber reinforced polymer composites: Experimental and numerical analyses for the capability of detection ». Applied Optics, vol. 55, nº 34. D1-D10.
Compte des citations dans Scopus : 23.

Zhang, Hai, Fernandes, Henrique, Hassler, Ulf, Ibarra-Castanedo, Clemente, Genest, Marc, Robitaille, François, Joncas, Simon et Maldague, Xavier. 2017. « Comparative study of microlaser excitation thermography and microultrasonic excitation thermography on submillimeter porosity in carbon fiber reinforced polymer composites ». Optical Engineering, vol. 56, nº 4.
Compte des citations dans Scopus : 19.

Zhang, Hai, Hassler, Ulf, Genest, Marc, Fernandes, Henrique, Robitaille, François, Ibarra-Castanedo, Clemente, Joncas, Simon et Maldague, Xavier. 2015. « Comparative study on submillimeter flaws in stitched T-joint carbon fiber reinforced polymer by infrared thermography, microcomputed tomography, ultrasonic c-scan and microscopic inspection ». Optical Engineering, vol. 54, nº 10.
Compte des citations dans Scopus : 26.

Zhang, Hai, Yu, Lingyao, Hassler, Ulf, Fernandes, Henrique, Genest, Marc, Robitaille, François, Joncas, Simon, Holub, Wolfgang, Sheng, Yunlong et Maldague, Xavier. 2016. « An experimental and analytical study of micro-laser line thermography on micro-sized flaws in stitched carbon fiber reinforced polymer composites ». Composites Science and Technology, vol. 126. pp. 17-26.
Compte des citations dans Scopus : 64.