Document quand le type de document est "Compte rendu de conférence" et l'année est 1994

Ameur, A., Romeo-Pakker, K., Miled, H. et Cheriet, M.. 1994. « Approche globale pour la reconnaissance des mots manuscrits arabes ». In CNED 94 : 3ème Colloque national sur l'écrit et le document, Rouen, 6-7-8 juillet 1994 (Rouen, France, 6-8 juillet 1994) pp. 151-157. Mont-Saint-Aignan, France : IUT de Rouen.

Amor, L. B., Dessaint, Louis-A., Hebert, Bernard et Akhrif, Ouassima. 1994. « On-line estimation of the instantaneous torque of a switched reluctance motor ». In Third International Conference on Automation, Robotics and Computer Vision (ICARCV) (Singapore, Singapore, Nov. 9-11, 1994) pp. 2068-2072. Singapore, Singapore : Nanyang Technological University.

Arteau, Jean. 1994. « Requirements for working clothes and personal protective equipment in forestry ». In Seminar on Clothing and Safety Equipment in Forestry : the proceedings of the Seminar on Clothing and Safety Equipment in Forestry held in Kuopio, Finland June 27 - July 1, 1994 (Kuopio, Finland, June 27-July 1, 1994) pp. 91-125. Geneva : ILO : Kuopio University.

Assaf, G. J. et Haas, R. C. G.. 1994. « Sub-network level analysis in pavement management ». In Roads to the 21st century: a key to competitiveness : International Road Federation conference and exposition : Calgary, Alberta, Canada July 3-7, 1994 : proceedings (Calgary, AB, Canada, July 3-7, 1994) D.25-D.26. Ottawa, ON, Canada : Transportation Association of Canada.

Assaf, Gabriel J. et Haas, R.. 1994. « The maintenance and rehabilitation effectiveness evaluation (MAREE) system ». In Third International Conference on Managing Pavements, San Antonio, Texas, May 22-26, 1994 (San Antonio, TX, USA, May 22-26, 1994) Coll. « Transportation Research Board Conference Proceedings » pp. 257-266. Washington, DC, USA : National Research Council. Transportation Research Board.

Awad, F.. 1994. « The electric vehicle: a case study in control engineering ». In Proceedings IASTED/ISMM Symposium Applied Modelling and Simulation, 20-22 June 1994 (Lugano, Switzerland, June 20-22, 1994) pp. 184-187. Anaheim, CA, USA : IASTED.

Awad, Fred. 1994. « An alternate approach to engineering education ». In Proceedings of the Third International Conference on Systems Integration (Sao Paulo, Brazil, Aug. 15-19, 1994) pp. 141-146. Los Alamitos, CA, USA : Institute of Electrical and Electronics Engineers Computer Society.

Balazinski, M., Czogala, E. et Kajl, S.. 1994. « On fuzzy control of ventilation process in air-ventilated closed areas with emission of noxious gases ». In Proceedings of the Third IEEE Conference on Fuzzy Systems, 1994. IEEE World Congress on Computational Intelligence (Orlando, FL, USA, June 26-29, 1994) pp. 655-660. IEEE.

Balazinski, M., Czogala, E., Kajl, S. et Roberge, M. A.. 1994. « Fuzzy prediction of building cooling load ». In Proceedings, CSME Forum 1994 = Comptes Rendus, Forum 1994 de la SCGM, June 27-29, 1994 McGill University, Montreal Quebec. (Montreal, QC, Canada, June 27-29, 1994) pp. 439-449. Ottawa, ON, Canada : CSME.

Beauchamp, Yves, Thomas, Marc, Masounave, Jacques et Youssef, Youssef A.. 1994. « Application of a full factorial design for the development of prediction models for surface roughness in lathe turning and boring operations ». In Tenth International Conference of the Israel Society for Quality (Jerusalem, Israel, Nov. 14-17, 1994) pp. 953-961. Jerusalem, Israel : ISAS International Seminars.

Beaulieu, Eric, Guillot, Michel, Gakwaya, Augustin, Genest, Christian et Ouellet, Denis. 1994. « Finite element analysis of powder metal products ». In Advances in Powder Metallurgy and Particulate Materials (Toronto, ON, Canada, May 8-11, 1994) Coll. « Proceedings of the 1994 International conference & exhibition on powder metallurgy & particulate materials » p. 105. Princeton, NJ, USA : Metal Powder Industries Federation.

Bédard, Claude. 1994. « Integrated environments for buildings: the end of traditional disciplines? An evolutionary perspective ». In Bridging the generations : International Workshop on the Future Directions of Computer-aided Engineering : position papers submitted to the workshop, Carnegie Mellon University, Pittsburgh, Pennsylvania, June 18-19, 1994 (Pittsburgh, PA, USA, June 18-19, 1994) pp. 107-110. Pittsburgh, PA, USA : Carnegie Mellon University.

Bédard, Claude et Tang Hung, Nguyen. 1994. « Building design with databases ». In Annual conference : June 1-4, 1994, Winnipeg : proceedings (Winnipeg, MB, Canada, June 1-4, 1994) pp. 423-429. Montreal, QC, Canada : Canadian Society for Civil Engineering.

Bégin, Guy et Thibeault, Claude. 1994. « A connectivity based, table-driven decoder for convolutional codes ». In 1994 IEEE International Symposium on Information Theory, 1994. Proceedings (Trondheim, Norway, June 27-July 1, 1994) p. 166. IEEE.

Benamor, L., Dessaint, Louis-A., Ghribi, Mohsen et Akhrif, Ouassima. 1994. « Adaptive nonlinear control of a permanent-magnet synchronous motor ». In 20th International Conference on Industrial Electronics, Control and Instrumentation (Bologna, Italy, Sept. 5-9, 1994) pp. 2110-2115. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Benamor, L., Dessaint, Louis-A., Ghribi, Mohsen et Akhrif, Ouassima. 1994. « Adaptive nonlinear control of a permanent-magnet synchronous motor ». In Third IEEE Conference on Control Applications (Glasgow, UK, Aug. 24-26, 1994) pp. 465-470. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Benmokrane, B., Tighiouart, B. et Chaallal, O.. 1994. « Investigation on FRP rebar bond performance ». In Proceedings of the 1994 CSCE annual conference = Comptes rendus du congrès annuel de la SCGC 1994 (Winnipeg, MB, Canada, June 1-4, 1994) pp. 378-387. Montréal, (Québec) : Canadian Society for Civil Engineering.

Bennis, S. et Lardigue, A.. 1994. « Modélisation de la circulation extra corporelle ». In 3 congrès de l'Association québécoise des fabricants de l'industrie médicale (AQFIM) (Montréal, QC, Canada, 9-10 nov. 1994)

Boissonnat, Jean-Daniel, Czyzowicz, Jurek, Devillers, Olivier, Robert, Jean-Marc et Yvinec, Mariette. 1994. « Convex tours of bounded curvature ». In Proceedings of 2nd Annual European Symposium on Algorithms, 26-28 Sept. 1994 (Utrecht, Netherlands, Sept. 26-28, 1994) Coll. « Lecture Notes in Computer Science », vol. 855. pp. 254-265. Berlin, Germany : Springer-Verlag.
Compte des citations dans Scopus : 2.

Botez, R. M. et Païdoussis, M. P.. 1994. « Nonlinear and chaotic dynamics of articulated cylinders in confined axial flow ». In Fifth Conference on Nonlinear Vibrations, Stability, and Dynamics of Structures : Program (Blacksburg, VA, USA, June 12-16, 1994) pp. 96-97. Ft. Belvoir Defense Technical Information Center.

Bouzid, A., Chaaban, A. et Bazergui, A.. 1994. « Effect of gasket creep relaxation on the leakage tightness of bolted flanged joints ». In Proceedings of the 1994 Pressure Vessels and Piping Conference (Minneapolis, MN, USA, June 19-23, 1994) Coll. « Pressure Vessels and Piping Division (Publication) PVP », vol. 286. pp. 155-163. American Society of Mechanical Engineers.
Compte des citations dans Scopus : 5.

Bouzid, A., Chaaban, A. et Bazergui, A.. 1994. « The influence of the flange rotation on the leakage performance of bolted flanged joints ». In CSME Forum, 1994 = Forum 1994 de la SCGM : proceedings/Comptes rendus (Montréal, QC, Canada, June 27-29, 1994) pp. 184-194. Ottawa, ON : Canadian Society for Mechanical Engineering.

Bouzouane, A., Lepage, Richard et Crevier, Daniel. 1994. « A multi-agent model for integrated artificial vision ». In Vision Interface '95, Proceedings (Quebec, QC, Canada, May 16-19, 1995) pp. 45-52. Toronto, ON, Canada : Canadian Information Processing Soc..

Brissette, F. P. et Tsanis, I. K.. 1994. « A software package for the advanced analysis of surface gravity wave data ». In Hydraulic Engineering Software V : 5th International Conference on Hydraulic Engineering Software (Port Carras, Greece, Sept. 21-23, 1994) pp. 267-274. Southampton, UK : Computational Mechanics Publications.

Cardinal, C., Gagnon, F. et Mainardis, F.. 1994. « Code search for MQAM TCM on independent 2-D fading channels ». In IEEE International Symposium on Information Theory (ISIT) (Trondheim, Norvège, June 27-July 01, 1994) p. 447. Information Theory Society of the Institute of,Electrical and Electronics Engineers.

Cardinal, C. et Gagnon, François. 1994. « MQAM TCM codes designed for slow independent rayleigh fading channels ». In Biennial symposium on communications (Kingston, ON, Canada, May, 1994) pp. 397-400.

Chaffaï, R. et Al Haddad, Kamal. 1994. « Convertisseur à résonance réversible deux quadrants ». In 1994 Canadian Conference on Electrical and Computer Engineering, 1994. Conference Proceedings (Halifax, NS, Canada, Sept. 25-28, 1994) pp. 38-41. Piscataway, NJ, USA : IEEE.

Cheriet, M., Thibault, R. et Sabourin, R.. 1994. « Segmentation visuelle des caractères manuscrits ». In 4th Annual IRIS/PRECARN Conference (Toronto, ON, Canada, 21-23 june, 1994) pp. 148-149.

Cheriet, Mohamed. 1994. « Towards a visual recognition of cursive script ». In Fundamentals in Handwriting Recognition (Toulouse, France, June 21-July 3rd, 1993) Coll. « NATO ASI Series », vol. 124. pp. 223-227. Berlin, Germany : Springer-Verlag.

Cheriet, Mohamed, Thibault, R. et Sabourin, Robert. 1994. « A multi-resolution based approach for handwriting segmentation in gray-scale images ». In IEEE International Conference Image Processing (ICIP) (Austin, TX, USA, Nov. 13-16, 1994) pp. 159-163. Los Alamitos, CA, USA : Institute of Electrical and Electronics Engineers Computer Society.
Compte des citations dans Scopus : 10.

Crevier, D., Yoo, H. J. et Lepage, R.. 1994. « An architecture for a soar-based image understanding system ». In Workshop on space operations applications and research SOAR '94 (Ann Arbor, MI, USA, Dec. 9-11, 1994) pp. 89-92.

Crevier, Daniel, Lepage, Richard et Yoo, H. J.. 1994. « Image processing experiments using SOAR ». In Proceedings of the 13th North American SOAR Workshop (Columbus, OH, USA, Mar. 11-13, 1994) pp. 251-254.

Crevier, Daniel et Yoo, Hoi J.. 1994. « A new method for straight line and circular arc extraction ». In 13th Conference on Intelligent Robots and Computer Vision Xiii: Algorithms and Computer Vision (Boston, MA, USA, Oct. 31-Nov. 2, 1994) Coll. « Proceedings of SPIE », vol. 2353. pp. 154-162. USA : SPIE.

Cuillère, J. -C., Maranzana, R. et Gueury, M.. 1994. « Intégration effective modélisation géométrique maillage tridimensionnel basée sur les méthodes frontales ». In Proceedings of IFAC International Conference on CAD/CAM: Robotics and Factories of the Future, 21-24 Aug. 1994 (Ottawa, ON, Canada, Aug. 21-24, 1994) Kanata, ON, Canada : OCRI Publications.

Cyr, J. -M., Dubé, E. et Al Haddad, Kamal. 1994. « Convertisseur CC/CC chargeur de batterie à haute performance ». In Renewables '94 : the road to prosperity = Énergies de remplacement 94 : sur la route de la prospérité, proceedings of the Solar Energy Society of Canada, October 30-November 2, 1994, Ottawa, Ontario (Ottawa, ON, Canada, Oct. 30-Nov. 2, 1994) pp. 39-49. Ottawa, ON, Canada : Solar Energy Society of Canada.

Czyzowicz, Jurek, Everett, Hazel et Robert, Jean-Marc. 1994. « Separating translates in the plane: combinatorial bounds and an algorithm ». In Fourth Scandinavian Workshop on Algorithm Theory (SWAT'94) (Aarhus, Denmark, July 06-08, 1994) Coll. « Lecture Notes in Computer Science », vol. 824. pp. 107-118. Berlin, Germany : Springer-Verlag.

Dao, Thien My, Bastien, P. et Galopin, Michel. 1994. « A computer aided decision system for optimum design of manipulation cell system ». In The 10th ISPE/IFAC International Conference on CAD/CAM, Robotics and Factories of the Future : CARs & FOF '94 : information technology for modern manufacturing : August 21-24, 1994, Ottawa, Canada : conference proceedings (Ottawa, ON, Canada, Aug. 21-24, 1994) pp. 732-737. Kanata, ON, Canada : OCRI Publications.

Dao, Thien-My et Galopin, Michel. 1994. « Operating field of manufacturing process optimization using the EM-2000 modelling system ». In Proceedings of IASTED Symposium Modelling, Identification and Control (Grindelwald, Switzerland, Feb. 21-23, 1994) pp. 216-218. Anaheim, CA, USA : IASTED.

Dao, Thien-My et Galopin, Michel. 1994. « Optimum design of manufacturing cell system using the cost based simulation approach ». In European Simulation Multiconference - Modelling and Simulation (ESM) (Barcelona, Spain, June 1-3, 1994) pp. 828-832. San Diego, CA, USA : Society for Computer Simulation International.

Doré, Sylvie. 1994. « IMS test case #6: lessons learned ». In Intelligent Manufacturing Systems (IMS) International conference on rapid product development (Stuttgart, Germany, Jan. 31-Feb. 2, 1994)

Doré, Sylvie, Venne, S., Tremblay, D. et de Guise, Jacques. 1994. « Effect of part parameters on laser range finder measurements ». In Intelligent Manufacturing Systems (IMS) International conference on rapid product development (Stuttgart, Germany, Jan. 31-Feb. 2, 1994) pp. 333-334.

Drouhard, Jean-Pierre, Sabourin, Robert et Godbout, Mario. 1994. « Evaluation of a training method and of various rejection criteria for a neural network classifier used for off-line signature verification ». In IEEE International Conference on Neural Networks, IEEE World Congress on Computational Intelligence (Orlando, FL, USA, June 27-Jul. 2, 1994) pp. 4294-4299. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 14.

Druez, J. et McComber, Pierre. 1994. « Field data on transmission line icing collected at the Mont Valin test site ». In Proceedings of the 13th International conference on offshore mechanics and arctic engineering (Houston, TX, USA, Feb. 27-Mar. 3, 1994) pp. 51-56. New York, NY, USA : American Society of Mechanical Engineers.

Dufrene, D., Gharbi, A., Kieffer, J. P., Rebouche, J. Y. et Villeneuve, L.. 1994. « A discrete event simulation methodology for the design of flexible manufacturingsystems: toward the use of an integrated set of models following progressive detail levels ». In Proceedings of the 1994 Summer Computer Simulation Conference : July 18-20, 1994, Hyatt Regency-La Jolla, San Diego, California : Tewnth-Sixth Annual Summer Computer Simulation Conference (San Diego, CA, USA, July 18-20, 1994) San Diego, CA, USA : Society for Computer Simulation.

Dumouchel, P.. 1994. « Suprasegmental features and continuous speech recognition ». In Proceedings of ICASSP '94. IEEE International Conference on Acoustics, Speech and Signal Processing (Adelaide, Australia, Apr. 19-22, 1994) II177-II180. Institute of Electrical and Electronics Engineers Inc..
Compte des citations dans Scopus : 3.

El-Ouafi, N. et Al Haddad, Kamal. 1994. « AC/DC series resonant AC/DC convertor with unity power factor ». In Proceedings of High Frequency Power Conversion (San Jose, CA, USA, Apr. 17-21,1994) pp. 575-585. USA : Intertec International.

Favre, R. et Hassan, M.. 1994. « Interpretation of static load tests ». In International Bridge Conference Warsaw '94 (Warsaw, Poland, June 1994)

Favre, R., Hassan, M. et Burdet, O.. 1994. « Statistical data combined with linear and non-linear analysis to interpret bridge load tests ». In Developments in short and medium span bridge engineering '94 : papers presented at the Fourth International Conference on Short and Medium Span Bridges held in Halifax, Nova Scotia, Canada, August 8-11, 1994 (Halifax, NS, Canada, Aug. 08-11, 1994) pp. 1197-1208. Canadian Society for Civil Engineering.

Fuhrman, C. P., Messina, S. et Decotignie, J. D.. 1994. « Fault tolerance techniques integrating MMS and ISIS ». In IEEE Symposium on Emerging Technologies and Factory Automation, 1994. ETFA '94 (Tokyo, Japan, Nov. 6-10, 1994) pp. 297-303. IEEE.

Gagné, Jean-Pierre, Thomas, Marc et Bensoussan, David. 1994. « Contrôle actif des vibrations de structures flexibles ». In Acte du Colloque vibrations et acoustique, Association canadienne française pour l'avancement des sciences (Montréal, QC, Canada, 18 mai 1994)

Gagnon, François et Valiquette, M.. 1994. « 32QAM Trellis coded modulation using commercial viterbi decoders ». In Biennial symposium on communications (Kingston, ON, Canada, May, 1994) pp. 248-251.

Galopin, M., Dao, T. M., Sun, Y. et Hansquine, S.. 1994. « Development of a computer-aided testing system for robotic arc welding ». In Fifth International Conference Computer Technology in Welding, Paris, France 15-16 June 1994 (Paris, France, June 15-16, 1994) Cambridge, UK : Abington Publishing.

Galopin, M., Dao, T. M., Zheng, C. Q. et Hansquine, S.. 1994. « A problem solving tool for optimization of welding processes ». In Proceedings of the Fifth International Welding Computerization Conference (Golden, CO, USA, Aug. 9-12, 1994)

Gargour, Christian et Ramachandran, V.. 1994. « Generation of variable magnitude 2-D transfer functions as a cascade of first-order 2-D filters ». In Proceedings of the 37th Midwest Symposium on Circuits and Systems (Lafayette, LA, USA, Aug. 3-5, 1994) pp. 1010-1013. New York, NY, USA : IEEE.

Genest, Christian, Guillot, Michel, Beaulieu, Eric et Ouellet, Denis. 1994. « High cycle fatigue of sintered 316L stainless steel ». In Advances in Powder Metallurgy and Particulate Materials (Toronto, ON, Canada, May 8-11, 1994) p. 325. Princeton, NJ, USA : Metal Powder Industries Federation.

Ghanem, M. C., Al Haddad, Kamal et Roy, G.. 1994. « Unity power factor parallel resonant converter ». In Proceedings of the Twenty-ninth International Power Conversion Conference : September 17-22, 1994, Dallas/Ft. Worth, Texas (Dallas, TX, USA, Sept. 17-22, 1994) Intertec International Inc..

Ghanem, M. C., Madama, J. M., Al-Haddad, K. et Roy, G.. 1994. « Unity power factor parallel resonant converter UPFPRC ». In Proceedings of Canadian Conference on Electrical and Computer Engineering, 25-28 Sept. 1994 (Halifax, NS, Canada, Sept. 25-28, 1994) pp. 97-100. New York, NY, USA : IEEE.

Gharbi, A. et Villeneuve, L.. 1994. « A generic simulation model supported by financial analysis for FMS design ». In International Symposium on Automotive Technology and Automation : 1994, Aachen, Germany, 31st October-4th November : proceedings for the dedicated Conference on Lean/Agile Manufacturing in the Automotive Industries (Aachen, Germany, Oct. 31-Nov. 4, 1994) Croydon, UK : Automotive Automation Ltd..

Ghribi, Mohsen et Lehuy, H.. 1994. « Optimal control and variable structure combination using a permanent-magnet synchronous motor ». In Conference Record of the IEEE Industry Applications Society Annual Meeting (Denver, CO, USA, Oct. 2-5, 1994) pp. 408-415. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 12.

Gonzalez, Javier, Delacressonniere, B., Tellier, J. et Gautier, J. L.. 1994. « Design and performance of a wide band active GaAs IC 180 phase-shifter 1-10 GHz ». In Symposium on Antenna Technology and Applied Electromagnetics (ANTEM) (Ottawa, Canada, Aug. 3-5, 1994) pp. 547-550. Winnipeg, Canada : University of Manitoba.

Hajji, R., Ghannouchi, F. M. et Kouki, A. B.. 1994. « Small-signal modeling of high power HBTs using the scaling approach ». In IEEE MTT-S International Microwave Symposium Digest (San Diego, CA, USA, May 23-27, 1994) pp. 1249-1252. IEEE.

Hammami, M. et Bensoussan, David. 1994. « Stabilité optimale des systèmes avec retard ». In Congrès Maghrébin de Génie Électrique (Tunis, Tunisie, 28-29 mai 1994)

Hammami, M., Turgeon, A. et Bensoussan, David. 1994. « Application de l'amélioration de la technique (QFT) pour la commande robuste ». In Congrès Maghrébin de Génie Électrique (Tunis, Tunisie, 28-29 mai 1994)

Hornung, H. G., Cummings, E. B., Germain, P., Sanderson, S. R., Sturtevant, B. et Wen, C. Y.. 1994. « Recent results from hypervelocity research in T5 ». In AIAA 25th Plasmadynamics and Lasers Conference (Colorado Springs, CO, USA, June 20-23, 1994) American Institute of Aeronautics and Astronautics Inc, AIAA.
Compte des citations dans Scopus : 5.

Hosseinpour, M. et Jahazi, M.. 1994. « Optimum welding of AISI 4130 steel ». In Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994) pp. 214-221.

Hosseinpour, M. et Jahazi, M.. 1994. « The influence of welding parameters on the HAZ microstructure of an ultra high strength steel ». In International Conference on Recent Advances in Materials and Mineral Resources (RAMM '94) : 3-5 May 1994, Penang, Malaysia (Penang, Malaysia, May 3-5, 1994) pp. 120-127.

Jalilian, F. et Jahazi, M.. 1994. « The effect of surface treatments on the physical behavior of copper-graphite composites ». In International Conference on Recent Advances in Materials and Mineral Resources (RAMM '94): 3-5 May 1994, Penang, Malaysia (Penang, Malaysia, May 3-5, 1994) pp. 326-334.

Jalilian, F., Sedghi, A. et Jahazi, M.. 1994. « The influence of carbon fiber surface treatment on the mechanism of copper growth ». In Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994) pp. 269-274.

Kaddouri, Azeddine, Akhrif, Ouassima, Le-Huy, Hoang et Ghribi, Mohsen. 1994. « Nonlinear feedback control of a permanent magnet synchronous motors ». In 1994 Canadian Conference on Electrical and Computer Engineering, 1994. Conference Proceedings (Halifax, NS, Canada, Sept. 25-28, 1994) pp. 77-80. Piscataway, NJ, USA : IEEE.
Compte des citations dans Scopus : 12.

Kajl, S., Czogala, E., Balazinski, M. et Roberge, M. A.. 1994. « Rooms temperature stabilization using a fuzzy approach ». In Healthy buildings '94 : proceedings of the 3rd international conference, Budapest, Hungary 22-25 August, 1994 (Budapest , Hungary, Aug. 22-25, 1994) pp. 637-642. Budapest, Hungary : Technical University of Budapest.

Kajl, S. et Doyon, É.. 1994. « A study on energy saving using dehumidification system: application to a swimming pool area ». In Healthy buildings '94 : proceedings of the 3rd international conference, Budapest, Hungary 22-25 August, 1994 (Budapest , Hungary, Aug. 22-25, 1994) pp. 331-335. Budapest, Hungary : Technical University of Budapest.

Kajl, Stanislaw et Roberge, M. A.. 1994. « Étude d'un cas d'analyse énergétique d'un bâtiment ». In 8e Congrès de l'Association québécoise pour la maîtrise de l'énergie (Québec, QC, Canada, mars 1994) pp. 1-7.

Khanduri, A. C., Stathopoulos, T. et Bédard, Claude. 1994. « A critical review of wind loads on buildings due to interference effects ». In Annual conference : June 1-4, 1994, Winnipeg : proceedings (Winnipeg, MB, Canada, June 1-4, 1994) pp. 98-107. Montreal, QC, Canada : Canadian Society for Civil Engineering.

Khebir, A., Kouki, A. B. et Ghannouchi, F. M.. 1994. « A pseudo-three-dimensional finite element analysis of non-uniform multiconductor transmission lines ». In IEEE MTT-S International Microwave Symposium Digest (San Diego, CA, USA, May 23-27, 1994) pp. 713-716. IEEE.

Labelle, Hubert, Poitras, A., Godbou, C., Jéquier, J. J., Dansereau, Jean et de Guise, Jacques A.. 1994. « Predictive value of bending tests in surgery for idiopathic scoliosis ». In Annual Meeting of the Pediatric Orthopaedic Society of North America (POSNA) (Memphis, TN, USA, May 1994)

Lan, André, Arteau, Jean et Corbeil, J.-F.. 1994. « Protection against falls from above-ground billboards ». In International Fall Protection Symposium (San Diego, CA, USA, Oct. 27-28, 1994)

Lan, André, Arteau, Jean et Corbeil, J.-F.. 1994. « Use of horizontal lifelines in structural steel erection ». In International Fall Protection Symposium (San Diego, CA, USA, Oct. 27-28, 1994)

Landry, René Jr. et Mahooti, Sharzad. 1994. « New theories and GPS experiments about effects of multipath and RF jammers ». In Proceedings of the 7th International Technical Meeting of the Satellite Division of The Institute of Navigation (ION GPS 1994) (Salt Lake City, UT, USA, Sept. 20-23, 1994) pp. 883-897. Manassas, VA, USA : The Institute of Navigation.

Lepage, Richard et Crevier, Daniel. 1994. « Multiresolution neural network for the extraction of the primal sketch ». In Intelligent Robots and Computer Vision XIII : Algorithms and Computer Vision (Boston, MA, USA, Oct. 31-Nov. 2, 1994) Coll. « Proceedings of SPIE », vol. 2353. pp. 375-384. USA : SPIE.

Lessard, N., Charron, F. et Laville, F.. 1994. « Using experimental design to reduce product sound level and variability ». In Third International Congress on Air- and Structure-Borne Sound and Vibration : proceedings, June 13-15, 1994, Montreal, Canada (Montreal, QC, Canada, June 13-15, 1994) pp. 1997-2002. Auburn, AL, USA : International Scientific Publications.

Li, X., Wang, Z., Jen, C. K., Viens, M., Cheeke, J. D. N., Yi, G. et Sayer, M.. 1994. « Ultrasonic thin wall tube wave sensors ». In 1994 Proceedings of IEEE Ultrasonics Symposium (Cannes, France, Oct. 31-Nov. 03, 1994) pp. 623-628. IEEE.
Compte des citations dans Scopus : 3.

Mahooti, Sharzad et Landry, René Jr. 1994. « New results about GPS multipath and RF jammers effects ». In Proceedings of the International Symposium on Kinematic Systems in Geodesy, Geomatics and Navigation : KIS 94 ; Banff, Canada August 30 - September 2, 1994 (Banff, AB, Canada, Aug. 30-Sept. 2, 1994) pp. 31-46. Banff, AB, Canada : University of Calgary.

Maranzana, R., Maltais, Y. et Deneux, D.. 1994. « Product/process matching via WEB grammar parsing ». In Proceedings of IFAC International Conference on CAD/CAM: Robotics and Factories of the Future, 21-24 Aug. 1994 (Ottawa, ON, Canada, Aug. 21-24, 1994) pp. 472-477. Kanata, ON, Canada : OCRI Publications.

Mascle, Cristian, Dupinet, E. et Maranzana, Roland. 1994. « Feature modelling in assembly planning ». In IFIP International conference feature modelling & recognition in advanced CAD/CAM systems (Valenciennes, France, May 24-26, 1994) pp. 605-626.

Masmoudi, R., Chaallal, O. et Benmoukrane, B.. 1994. « Flexural behavior of normal and high-strength concrete beams reinforced with GFRP rebars ». In Corrosion and corrosion protection of steel in concrete : proceedings of International Conference held at the University of Sheffield 24-28 July, 1994 (Sheffield, UK, July 24-28, 1994) pp. 1340-1351. Sheffield, UK : Sheffield Academic Press.

McComber, Pierre, Druez, Jacques et Laflamme, Jean. 1994. « Icing rate meter estimation of in-cloud cable icing ». In 4th International Offshore and Polar Engineering Conference (Osaka, Japan, Apr. 10-15, 1994) pp. 495-502. USA : International Society of Offshore and Polar Engineers.

Messaoudi, R., Benmokrane, B. et Chaallal, Omar. 1994. « Experimental and theoretical study of flexural behavior of concret beams reinforced with GFRP rebars ». In 5th International Conference on Concrete in Developing Countries (Cairo, Egypt, Jan. 3-6, 1994) pp. 818-832.

Mokhtar, A. et Bédard, Claude. 1994. « Toward integrated construction technical documents - a new approach through product modelling ». In Product and process modelling in the building industry : proceedings of ECPPM '94--the First European Conference on Product and Process Modelling in the Building Industry, Dresden, Germany, 5-7 October 1994 (Dresden, Germany, Oct. 5-7, 1994) pp. 3-9. Rotterdam, The Netherlands : A.A. Balkema.

Montrueil, B., Olivier, C., Lefrançois, P. et Maley, J. G.. 1994. « Modeling of flow patterns in a flexible network of manufacturing workstations ». In Progress in material handling research: 1994 : [invited papers submitted for presentation and discussion at the 1994 International Material Handling Research Colloquium held in Grand Rapids, Michigan, on June 12 - 15] (Grand Rapids, MI, USA, June 12-15, 1994) Charlotte, NC, USA : The Material Handling Industry of America.

Noumeir, Rita, Mailloux, Guy E. et Lemieux, Raymond. 1994. « Bayesian image reconstruction: an application to emission ». In IEEE Seventh SP Workshop on Statistical Signal and Array Processing (Quebec, QC, Canada, June 26-29, 1994) pp. 405-408.

Noumeir, Rita, Mailloux, Guy E. et Lemieux, Raymond. 1994. « Three-dimensional correction of experimentally determined gamma camera response ». In IEEE Nuclear Science Symposium and Medical Imaging Conference (Norfolk, VA, USA, Oct. 30-Nov. 5, 1994) pp. 1720-1724. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Olivier, C., Montreuil, B. et Lefrançois, P.. 1994. « An object-oriented modeling approach for the design of a control system in a flexible network of manufacturing workstations ». In International Symposium on Automotive Technology and Automation : 1994, Aachen, Germany, 31st October-4th November : proceedings for the dedicated Conference on Lean/Agile Manufacturing in the Automotive Industries (Aachen, Germany, Oct. 31-Nov. 4, 1994) pp. 301-308. Croydon, UK : Automotive Automation Ltd..

Olivier, C., Montreuil, B., Lefrançois, P. et Maley, J. G.. 1994. « Evaluating layouts for mass customizing factories ». In Proceedings of IFAC International Conference on CAD/CAM: Robotics and Factories of the Future, 21-24 Aug. 1994 (Ottawa, ON, Canada, Aug. 21-24, 1994) pp. 862-869. Kanata, ON, Canada : OCRI Publications.

Piché, F., Gagnon, François, Batani, Naïm et Terreault, G.. 1994. « Generation and reception of a carrier interference on MQAM signals for channel estimation ». In Biennial symposium on communications (Kingston, ON, Canada, May-June, 1994) pp. 371-375.

Ramachandran, V., Ahmadi, M. et Gargour, Christian. 1994. « Design of 2-D nonsymmetrical band-pass filters by a combination of 2-D all-pass filters ». In Proceedings of the 37th Midwest Symposium on Circuits and Systems (Lafayette, LA, USA, Aug. 3-5, 1994) pp. 1023-1026. New York, NY, USA : IEEE.

Ramachandran, V., Ahmadi, M. et Gargour, Christian. 1994. « Filters derived from the addition or subtraction of two m-D all-pass filters ». In IEEE International Symposium on Circuits and Systems (ISCAS) (London, UK, May 30-June 2, 1994) pp. 269-272. New York, NY, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 1.

Rivard, Hugues, Bédard, Claude, Ha, Kinh H. et Fazio, Paul. 1994. « Functional analysis of the envelope design process for integrated building design ». In Proceedings of the 1st Congress on Computing in Civil Engineering (Washington, DC, USA, June 20-22, 1994) pp. 71-78. New York, NY, USA : ASCE.

Robert, R., Drolet, J., Laperrière, L., Koffi, D., Mascle, C., Maranzana, R. et Desrochers, A.. 1994. « An automatic methodology for modular fixturing ». In Proceedings, CSME Forum 1994 = Comptes Rendus, Forum 1994 de la SCGM, June 27-29, 1994 McGill University, Montreal Quebec. (Montreal, QC, Canada, June 27-29, 1994) Ottawa, ON, Canada : CSME.

Ross, Y., de Guise, J. A., Bleau, A., Dansereau, J. et Sabourin, R.. 1994. « Computer assisted detection of scoliotic vertebral pedicles using morphological segmentation ». In 2nd International Symposium on three-dimensional scoliotic deformities, combined with 8th International Symposium on surface topography and spinal deformity:26-29 September 1994, Pescara, Italy (Pescara, Italy, Sept. 26-29, 1994)

Ross, Y., Potvin, J., Bleau, A., Sabourin, R. et de Guise, J. A.. 1994. « Digital radiography detection of scoliotic vertebral pedicles using morphological segmentation ». In Proceedings of the Society Internationale de Recherche en Orthopedie et Traumatologie (SIROT) (Boston, MA, USA, Oct. 27-30, 1994) p. 53.

Rousse, Daniel R.. 1994. « Predictions of two-dimensional natural convection in a porous medium ». In Congresso nazionale ATI 49=49th ATI National congress: Perugia, 26-30 Settembre 1994: Atti del congresso (Perugia, Italy, Sept. 26-30, 1994) pp. 2135-2147. Padova, Italy : Servizi Frafici Editoriali.

Sabourin, R. et Genest, G.. 1994. « Coopération de classificateurs pour la vérification automatique des signatures ». In CNED 94 : 3ème Colloque national sur l'écrit et le document, Rouen, 6-7-8 juillet 1994 (Rouen, France, 6-8 juillet, 1994) Mont-Saint-Aignan, France : IUT de Rouen.

Sabourin, Robert et Genest, Ginette. 1994. « An extended-shadow-code based approach for off-line signature verification. I. Evaluation of the bar mask definition ». In 12th International Conference on Pattern Recognition- Conference B: Computer Vision & Image Processing (Jerusalem, Oct. 9-13, 1994) pp. 450-453. Los Alamitos, CA, USA : Institute of Electrical and Electronics Engineers Computer Society.

Sadeghi, H., Shariati, M. et Jahazi, M.. 1994. « A computer code for the prediction of forming steps in precision forging ». In Proceedings of the 2nd International ISME Conference (Tehran, Iran, May 2-5, 1994) pp. 167-174.

Sati, M., de Guise, J. A. et Drouin, G.. 1994. « In vivo non-invasive 3D knee kinematic measurement and animation system: accuracy evaluation ». In Third International Symposium on the 3-D analysis of human movement (Stockholm, Sweden, July 5-8, 1994) pp. 19-22.

Scheed, L. et Masounave, Jacques. 1994. « Thermally-assisted machining (tam) of metal matrix composites reinforced by large particles ». In Proceedings of the International Symposium on Recent Developments in Light Metals (Toronto, Canada, Aug. 20-25, 1994) pp. 197-211. Montreal, Canada : Canadian Institute of Mining, Metallurgy and Petroleum.

Schneider, M. C., Galup-Montoro, C., Koerich, A. L. et Pinto, R. L. O.. 1994. « MOSFET threshold extraction from voltage-only measurements ». In IX Brazilian Microelectronics Congress (SBMICRO'1994) (Rio de Janeiro, Brazil, Aug., 1994) pp. 216-222.
Compte des citations dans Scopus : 7.

Soulaïmani, A., Chassé, D. et Lamarche, L.. 1994. « Simple adaptive mesh method for compressible flows ». In Proceedings of the 11th Canadian Symposium on Fluid Dynamics (Edmonton, AB, Canada, June 10-12, 1994)

Soulaïmani, A., Rebaine, A. et Mercadier, Y.. 1994. « Numerical evaluation of a new shock capturing operator for compressible flows ». In WCCM III : the third World Congress on Computational Mechanics, August 1 - 5, 1994, Chiba, Japan (Chiba, Japan, Aug. 1-5, 1994) International Association for Computational Mechanics.

Talla, M., Elhakeem, A. K. et Kadoch, M.. 1994. « Throughput and delay characteristics of ARQ transport protocols over LEO and GEO satellite networks ». In Singapore ICCS '94. Conference Proceedings (Singapore, Singapore, Nov. 14-18, 1994) pp. 410-414. IEEE.

Thibeault, Claude. 1994. « Using Fourier analyses to enhance IC testability ». In IEEE International Workshop on Defect and Fault Tolerance in VLSI Systems (Los Alamitos, CA, USA, Oct. 17-19, 1994) pp. 280-288. IEEE Computer Society Press.
Compte des citations dans Scopus : 5.

Thibeault, Claude. 1994. « Using sinusoidal stimuli and Fourier analyses for memory IC testing ». In IEEE International Workshop on Memory Technology, Design and Testing (San Jose, CA, USA, Aug. 8-9, 1994) pp. 92-97. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 1.

Thirion, Louis. 1994. « Parametric machining ». In Proceedings of Intelligent Manufacturing Systems (IMS) International conference on rapid product development (Stuttgart, Germany, Jan. 31-Feb. 2, 1994) pp. 337-345.

Tou, M., Al Haddad, Kamal et Rajagoplan, V.. 1994. « A new three phase unity power factor boost rectifiers with capacity type input ». In Proceedings of the Twenty-ninth International Power Conversion Conference : September 17-22, 1994, Dallas/Ft. Worth, Texas (Dallas, TX, USA, Sept. 17-22, 1994) pp. 431-440. Intertec International Inc..

Tou, Mohamed, Al-Haddad, Kamal, Olivier, Guy et Rajagopalan, V.. 1994. « A new three-phase unity power factor boost rectifier with capacitive-type input ». In IEEE 4th Workshop on Computers in Power Electronics (Trois-Rivières, Canada, Aug. 7-10, 1994) pp. 256-265. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Tou, Mohamed, Al-Haddad, Kamal et Rajagopalan, V.. 1994. « Unity power factor boost topology applied on three-phase rectifier ». In Twenty-Ninth International Power Conversion Conference (Dallas/Ft. Worth, TX, USA, Sept. 17-22, 1994) pp. 431-440. Ventura, CA, USA : Intertech Int.

Tou, Mohamed, Ngobou, P., Rossi, F., Al-Haddad, Kamal et Rajagopalan, V.. 1994. « Nouveau convertisseur CA-CC triphasé de type élévateur à facteur de puissance unitaire ». In Canadian Conference on Electrical and Computer Engineering (Halifax, Canada, Sept. 25-28, 1994) pp. 14-17. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Vu-Khanh, Toan et Lê, V. N.. 1994. « Impact damage in peek/carbon fiber laminated composite ». In Symposium of MRS-1994 Fall Meeting (Boston, MA, USA, Nov. 27-Dec. 2, 1994) p. 587. Materials Research Society.

Vu-Khanh, Toan et Liu, B.. 1994. « Prediction of thermal expansion behaviour of deformed woven fabric laminates ». In MACM - 5 : proceedings : fifth International Conference on Marine Applications of Composite Materials, April 18-20, 1994, Melbourne, Florida, USA (Melbourne, FL, USA, Apr. 18-20, 1994) Melbourne, FL, USA : Composites Education Association.

Yoo, Hoi J., Crevier, Daniel, Lepage, Richard et Myler, Harley R.. 1994. « Line drawing extraction from gray level images by feature integration ». In Intelligent Robots and Computer Vision Xiii: Algorithms and Computer Vision (Boston, MA, USA, Oct. 31-Nov 2, 1994) Coll. « Proceedings of SPIE », vol. 2353. pp. 96-107. USA : SPIE.

Youssef, Youssef A. et Beauchamp, Yves. 1994. « Education for quality at the École de technologie supérieure : a pioneering experience ». In Tenth International Conference of the Israel Society for Quality (Jerusalem, Israel, Nov. 14-17, 1994) pp. 340-344. Jerusalem, Israel : ISAS International Seminars.

Youssef, Youssef A., Beauchamp, Yves et Thomas, Marc. 1994. « Comparison of a full factorial experiment to fractional and taguchi designs in a lathe dry turning operation ». In Proceedings of 16th International Conference on Computers & Industrial Engineering ICC&IE-94 (Ashikaga, Japan, Mar. 7-9, 1994) pp. 286-289. Ashikaga, Japan : Ashikaga Institute of Technologie.
Compte des citations dans Scopus : 48.

Youssef, Youssef. A., Beauchamp, Yves et Papineau, R. L.. 1994. « An innovative approach in teaching quality management and assurance at École de technologie supérieure ». In Congrès international sur la qualité totale (Mexico City, Mexico, Oct. 18-21, 1994)