| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
L'affiliation est "Génie mécanique"Nombre de documents archivés : 416. Article publié dans une revue, révisé par les pairs
Abenhaim, Gad N., Desrochers, Alain, Tahan, Antoine S. et Bigeon, Jean.
2015.
« A finite-element boundary condition setting method for the virtual mounting of compliant components ».
Journal of Computing and Information Science in Engineering, vol. 15, nº 4.
Abenhaim, Gad N., Desrochers, Alain, Tahan, S.-Antoine et Bigeon, Jean.
2015.
« A virtual fixture using a FE-based transformation model embedded into a constrained optimization for the dimensional inspection of nonrigid parts ».
Computer-Aided Design, vol. 62.
pp. 248-258.
Ahmadabadi, Z. Nili, Laville, Frédéric et Guilbault, Raynald.
2015.
« An empirical prediction law for quasi-static nail-plywood penetration resistance ».
Construction and Building Materials, vol. 88.
pp. 126-133.
Aidibe, Ali et Tahan, S.-Antoine.
2015.
« Adapting the coherent point drift algorithm to the fixtureless dimensional inspection of compliant parts ».
International Journal of Advanced Manufacturing Technology, vol. 79, nº 5.
pp. 831-841.
Arpin-Pont, Jérémy, Gagnon, Martin, Tahan, S.-Antoine, Coutu, André et Thibault, Denis.
2015.
« Methodology for estimating strain gauge measurement biases and uncertainties on isotropic materials ».
Journal of Strain Analysis for Engineering Design, vol. 50, nº 1.
pp. 40-50.
Asgarinia, Soroush, Viriyasuthee, Chanvit, Phillips, Steven, Dubé, Martine, Baets, Joris, Van Vuure, Aart, Verpoest, Ignaas et Lessard, Larry.
2015.
« Tension-tension fatigue behaviour of woven flax/epoxy composites ».
Journal of Reinforced Plastics and Composites, vol. 34, nº 11.
pp. 857-867.
Assaad, Elias, Maire, Marion et Lerouge, Sophie.
2015.
« Injectable thermosensitive chitosan hydrogels with controlled gelation kinetics and enhanced mechanical resistance ».
Carbohydrate Polymers, vol. 130.
pp. 87-96.
Bège, Thierry, Ménard, Jérémie, Tremblay, Jaelle, Denis, Ronald, Arnoux, Pierre-Jean et Petit, Yvan.
2015.
« Biomechanical analysis of traumatic mesenteric avulsion ».
Medical and Biological Engineering and Computing, vol. 53, nº 2.
pp. 187-194.
Bonnet, Fabien, Nélisse, Hugues et Voix, Jérémie.
2015.
« The opportunities and challenges of in-ear noise dosimetry ».
[Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 43, nº 3.
pp. 80-81.
Boudreau-Trudel, Bryan, Nadeau, Sylvie et Zaras, Kazimierz.
2015.
« Innovative mining equipment: key factors for successful implementation ».
American Journal of Industrial and Business Management, vol. 5, nº 4.
pp. 161-171.
Boulle, Adrien, Dubé, Martine et Gosselin, Frédérick P..
2015.
« Parametric study of an elliptical fuselage made of a sandwich composite structure ».
Mechanics Research Communications, vol. 69.
pp. 129-135.
Bouriga, M., Taher, R., Morency, François et Weiss, Julien.
2015.
« Numerical investigation of secondary flows in a constant-width wind-tunnel contraction ».
Aeronautical Journal, vol. 119, nº 1215.
pp. 613-630.
Bouzid, A. H., Mourad, A. H. I. et El Domiaty, A..
2015.
« Impact of Bauschinger effect on the residual contact pressure of hydraulically expanded tube-to-tubesheet joints ».
[Article de conférence]. Procedia Engineering, vol. 130.
pp. 176-192.
Bouzid, Hakim et Benabdallah, S..
2015.
« Characterization of PTFE-based gaskets at high temperature ».
Journal of Pressure Vessel Technology, vol. 137, nº 3.
Boyer, S., Doutres, Olivier, Sgard, F., Laville, Frédéric et Boutin, J..
2015.
« Low frequency finite element models of the acoustical behavior of earmuffs ».
Journal of the Acoustical Society of America, vol. 137, nº 5.
pp. 2602-2613.
Brailovski, V., Terriault, P., Prokoshkin, S., Simoneau, C., Rivard, J. et Dubinskiy, S..
2015.
« Superelastic nickel-free porous materials for load-bearing medical implants: fabrication and modeling ».
[Article de conférence]. Materials Today: Proceedings, vol. 2, nº Supp. 3.
S511-S516.
Brailovski, Vladimir, Prokoshkin, Sergey, Inaekyan, Karine, Petrzhik, Mikhail, Filonov, Mikhail, Pustov, Yuriy, Dubinskiy, Sergey, Zhukova, Yulia, Korotitskiy, Andrey et Sheremetyev, Vadim.
2015.
« Thermomechanical treatment of Ti-Nb solid solution based SMA ».
Foundations of Materials Science and Engineering, vol. 81-82.
pp. 342-405.
Brais, Godefroy, Ménard, Jérémie, Mutch, Jennifer, Laflamme, G. Yves, Petit, Yvan et Rouleau, Dominique M..
2015.
« Transosseous braided-tape and double-row fixations are better than tension band for avulsion-type greater tuberosity fractures ».
Injury, vol. 46, nº 6.
pp. 1007-1012.
Brummund, Martin K., Sgard, Franck, Petit, Yvan, Laville, Frédéric et Nelisse, Hugues.
2015.
« An axisymmetric finite element model to study the earplug contribution to the bone conduction occlusion effect ».
Acta Acustica united with Acustica, vol. 101, nº 4.
pp. 775-788.
Brun-Berthet, Joris et Laville, Frederic.
2015.
« Using experimental design to characterize the effect of structural elements on acoustical response of hand-free phone ».
Applied Acoustics, vol. 100.
pp. 43-54.
Chamanfar, A., Jahazi, M., Bonakdar, A., Morin, E. et Firoozrai, A..
2015.
« Cracking in fusion zone and heat affected zone of electron beam welded Inconel-713LC gas turbine blades ».
Materials Science and Engineering: A, vol. 642.
pp. 230-240.
Chamanfar, A., Jahazi, Mohammad et Cormier, J..
2015.
« A review on inertia and linear friction welding of Ni-based superalloys ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 46, nº 4.
pp. 1639-1669.
Chamanfar, A., Jahazi, Mohammad, Gholipour, J., Wanjara, P. et Yue, S..
2015.
« Analysis of integrity and microstructure of linear friction welded Waspaloy ».
Materials Characterization, vol. 104.
pp. 149-161.
Chergui, Nacera, Lateb, Mohamed, Lacroix, Etienne et Dufresne, Louis.
2015.
« CFD study of flow dynamics in a blade free planetary mixer (BFPM) - A qualitative flow study ».
Chemical Engineering Research and Design, vol. 102, nº 1.
pp. 100-115.
Daoud, M., Chatelain, J. F. et Bouzid, A..
2015.
« Effect of rake angle on Johnson-Cook material constants and their impact on cutting process parameters of Al2024-T3 alloy machining simulation ».
International Journal of Advanced Manufacturing Technology, vol. 81, nº 9-12.
pp. 1987-1997.
Daoud, M., Jomaa, W., Chatelain, J. F. et Bouzid, A..
2015.
« A machining-based methodology to identify material constitutive law for finite element simulation ».
International Journal of Advanced Manufacturing Technology, vol. 77, nº 9-12.
pp. 2019-2033.
Demers, V., Turenne, S. et Scalzo, O..
2015.
« Impact of binders on viscosity of low-pressure powder injection molded Inconel 718 superalloy ».
Journal of Materials Science, vol. 50, nº 7.
pp. 2893-2902.
Demers, Vincent, Turenne, Sylvain et Scalzo, Orlando.
2015.
« Segregation measurement of powder injection molding feedstock using thermogravimetric analysis, pycnometer density and differential scanning calorimetry techniques ».
Advanced Powder Technology, vol. 26, nº 3.
pp. 997-1004.
Doutres, Olivier, Atalla, Noureddine et Osman, Haisam.
2015.
« Transfer matrix modeling and experimental validation of cellular porous material with resonant inclusions ».
Journal of the Acoustical Society of America, vol. 137, nº 6.
pp. 3502-3513.
Doutres, Olivier, Sgard, Franck, Laville, Frédéric, Voix, Jérémie, Bouthot, Olivier, Nélisse, Hugues, Marcotte, Pierre et Boutin, Jérôme.
2015.
« Is my material an efficient acoustical material? ».
Canadian Acoustics = Acoustique Canadienne, vol. 43, nº 2.
pp. 24-25.
Dubé, Martine, Chazerain, Aurélie, Hubert, Pascal, Yousefpour, Ali et Bersee, Harald E. N..
2015.
« Characterization of resistance-welded thermoplastic composite double-lap joints under static and fatigue loading ».
Journal of Thermoplastic Composite Materials, vol. 28, nº 6.
pp. 762-776.
Dubot, Fabien, Favennec, Yann, Rousseau, Benoit et Rousse, Daniel R..
2015.
« A wavelet multi-scale method for the inverse problem of diffuse optical tomography ».
Journal of Computational and Applied Mathematics, vol. 289.
pp. 267-281.
Dubot, Fabien, Favennec, Yann, Rousseau, Benoit et Rousse, Daniel R..
2015.
« Regularization opportunities for the diffuse optical tomography problem ».
International Journal of Thermal Sciences, vol. 98.
El Aidani, Rachid, Nguyen-Tri, Phuong et Vu-Khanh, Toan.
2015.
« Influence of hydrolytic degradation on properties of moisture membranes used in fire-protective clothing ».
International Journal of Chemical and Molecular Engineering, vol. 9, nº 9.
pp. 1135-1139.
Facchinello, Yann, Brailovski, Vladimir, Petit, Yvan, Brummund, Martin, Tremblay, Jaëlle et Mac-Thiong, Jean-Marc.
2015.
« Biomechanical assessment of the stabilization capacity of monolithic spinal rods with different flexural stiffness and anchoring arrangement ».
Clinical Biomechanics, vol. 30, nº 10.
pp. 1026-1035.
Fannou, Jean-Louis Comlan, Rousseau, Clément, Lamarche, Louis et Kajl, Stanislaw.
2015.
« A comparative performance study of a direct expansion geothermal evaporator using R410A and R407C as refrigerant alternatives to R22 ».
Applied Thermal Engineering, vol. 82.
pp. 306-317.
Francie, Kouedeu Annie, Jean-Pierre, Kenne, Pierre, Dejax, Victor, Songmene et Vladimir, Polotski.
2015.
« Stochastic models and numerical solutions for manufacturing/remanufacturing systems with applications to the printer cartridge industry ».
Journal of Manufacturing Systems, vol. 37, nº Part 3.
pp. 662-671.
Ghaffari Mosanenzadeh, Shahrzad, Doutres, Olivier, Naguib, Hani E., Park, Chul B. et Atalla, Noureddine.
2015.
« A numerical scheme for investigating the effect of bimodal structure on acoustic behavior of polylactide foams ».
Applied Acoustics, vol. 88.
pp. 75-83.
Ghaffari Mosanenzadeh, Shahrzad, Doutres, Olivier, Naguib, Hani E., Park, Chul B. et Atalla, Noureddine.
2015.
« A semi-empirical model relating micro structure to acoustic properties of bimodal porous material ».
Journal of Applied Physics, vol. 117, nº 3.
034305.
Ghasemi Nanesa, H. et Jahazi, Mohammad.
2015.
« Alternative phase transformation path in cryogenically treated AISI D2 tool steel ».
Materials Science and Engineering: A, vol. 634.
pp. 32-36.
Ghasemi-Nanesa, Hadi, Jahazi, Mohammad et Naraghi, Reza.
2015.
« Martensitic transformation in AISI D2 tool steel during continuous cooling to 173K ».
Journal of Materials Science, vol. 50, nº 17.
pp. 5758-5768.
Guilbault, Raynald, Lalonde, Sébastien et Thomas, Marc.
2015.
« Modeling and monitoring of tooth fillet crack growth in dynamic simulation of spur gear set ».
Journal of Sound and Vibration, vol. 343.
pp. 144-165.
Guillon, Laura, Quesada, Guillermo et Rousse, Daniel R..
2015.
« An experimental validation of the concept critical solar radiation for solar tracking systems ».
International Journal of Applied Science and Technology, vol. 5, nº 3.
Guo, Meng, Fréchette, Michel, David, Eric et Demarquette, Nicole R..
2015.
« Polyethylene-based dielectric composites containing polyhedral oligomeric SilSesquioxanes obtained by ball milling ».
Transactions on Electrical and Electronic Materials, vol. 16, nº 2.
pp. 53-61.
Hallé, Stéphane, Nadeau, Sylvie et Fatisson, Julien.
2015.
« Engineered containment and control of airborne nanoparticles: current status ».
International Journal of Safety and Security Engineering, vol. 5, nº 4.
pp. 336-351.
Hamid Pourian, Meysam, Pilvin, Philippe, Bridier, Florent et Bocher, Philippe.
2015.
« Modeling the elastoplastic behaviors of alpha Ti-alloys microstructure using Cellular Automaton and finite element methods ».
Computational Materials Science, vol. 99.
pp. 33-42.
Heid, T., Fréchette, M. et David, É..
2015.
« Functional epoxy composites for high voltage insulation involving c-BN and reactive POSS as compatibilizer ».
Journal of Materials Science, vol. 50, nº 16.
pp. 5494-5503.
Heid, T., Frechette, M. et David, Eric.
2015.
« Epoxy/BN micro- and submicro-composites: dielectric and thermal properties of enhanced materials for high voltage insulation systems ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 22, nº 2.
pp. 1176-1185.
Heid, Thomas, Frechette, Michel et David, Éric.
2015.
« Nanostructured epoxy/POSS composites: enhanced materials for high voltage insulation applications ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 22, nº 3.
pp. 1594-1604.
Helal, E., Demarquette, Nicole R., Amurin, L. G., David, Éric, Carastan, D. J. et Fréchette, M..
2015.
« Styrenic block copolymer-based nanocomposites: Implications of nanostructuration and nanofiller tailored dispersion on the dielectric properties ».
Polymer, vol. 64.
pp. 139-152.
Imaouchen, Yacine, Alkama, Rezak et Thomas, Marc.
2015.
« Complexity based on synchrosqueezing analysis in gear diagnosis ».
Mechanics and Industry, vol. 16, nº 5.
Inaekyan, K., Brailovski, Vladimir, Prokoshkin, S., Pushin, V., Dubinskiy, S. et Sheremetyev, V..
2015.
« Comparative study of structure formation and mechanical behavior of age-hardened Ti-Nb-Zr and Ti-Nb-Ta shape memory alloys ».
Materials Characterization, vol. 103.
pp. 65-74.
Jalani, Ghulam, Naccache, Rafik, Rosenzweig, Derek H., Lerouge, Sophie, Haglund, Lisbet, Vetrone, Fiorenzo et Cerruti, Marta.
2015.
« Real-time, non-invasive monitoring of hydrogel degradation using LiYF4:Yb3+/Tm3+ NIR-to-NIR upconverting nanoparticles ».
Nanoscale, vol. 7, nº 26.
pp. 11255-11262.
Kadri, Soumaya, Dhifaoui, Belgacem, Dutil, Yvan, Jabrallah, Sadok Ben et Rousse, Daniel R..
2015.
« Large-scale experimental study of a phase change material: shape identification for the Solid-Liquid interface ».
International Journal of Thermophysics, vol. 36, nº 10.
pp. 2897-2915.
Kamkar, N., Bridier, F., Jedrzejowski, P. et Bocher, Philippe.
2015.
« Water droplet impact erosion damage initiation in forged Ti-6Al-4V ».
Wear, vol. 322-323.
pp. 192-202.
Kazeminia, Mehdi et Bouzid, Abdel-Hakim.
2015.
« Prediction of gas flow in compressible and low permeability porous media ».
Journal of Fluid Science and Technology, vol. 10, nº 2.
Kazeminia, Mehdi et Bouzid, Hakim.
2015.
« Stress analysis of packed stuffing-boxes ».
Journal of Pressure Vessel Technology, vol. 137, nº 5.
Kedadouche, Mourad, Thomas, Marc et Tahan, Antoine.
2015.
« A hybrid method combining Teager Kaiser energy operator, empirical mode decomposition and minimum entropy deconvolution for monitoring gears damages ».
Mechanics and Industry, vol. 16, nº 6.
Kedadouche, Mourad, Thomas, Marc, Tahan, Antoine et Guilbault, Raynald.
2015.
« Nonlinear parameters for monitoring gear: comparison between lempel-ziv, approximate entropy, and sample entropy complexity ».
Shock and Vibration, vol. 2015.
Khakpour, Hamed, Birglen, Lionel et Tahan, Souheil-Antoine.
2015.
« Analysis and optimization of a new differentially driven cable parallel robot ».
Journal of Mechanisms and Robotics, vol. 7, nº 3.
Khakpour, Hamed, Birglen, Lionel et Tahan, Souheil-Antoine.
2015.
« Uniform scanning path generation for abrasive waterjet polishing of free-form surfaces modeled by triangulated meshes ».
International Journal of Advanced Manufacturing Technology, vol. 77, nº 5.
pp. 1167-1176.
Khou, Jean-Charles, Ghedhaifi, Weeded, Vancassel, Xavier et Garnier, François.
2015.
« Spatial simulation of contrail formation in near-field of commercial aircraft ».
Journal of Aircraft, vol. 52, nº 6.
pp. 1927-1938.
Kouam, Jules, Songmene, Victor, Balazinski, Marek et Hendrick, Patrick.
2015.
« Effects of minimum quantity lubricating (MQL) conditions on machining of 7075-T6 aluminum alloy ».
International Journal of Advanced Manufacturing Technology, vol. 79, nº 5.
pp. 1325-1334.
Kouedeu, A. F., Kenné, J.-P., Dejax, P., Songmene, V. et Polotski, V..
2015.
« Production and maintenance planning for a failure-prone deteriorating manufacturing system: a hierarchical control approach ».
International Journal of Advanced Manufacturing Technology, vol. 76, nº 9.
pp. 1607-1619.
Kreitcberg, A., Brailovski, Vladimir, Prokoshkin, S., Gunderov, D., Khomutov, M. et Inaekyan, K..
2015.
« Effect of the grain/subgrain size on the strain-rate sensitivity and deformability of Ti-50at%Ni alloy ».
Materials Science and Engineering A, vol. 622.
pp. 21-29.
Kurusu, Rafael S. et Demarquette, Nicole R..
2015.
« Blending and morphology control to turn hydrophobic SEBS electrospun mats superhydrophilic ».
Langmuir, vol. 31, nº 19.
pp. 5495-5503.
Kurusu, Rafael Salles, Siliki, Chris Alexandra, David, Eric, Demarquette, Nicole R., Gauthier, Catherine et Chenal, Jean-Marc.
2015.
« Incorporation of plasticizers in sugarcane-based poly(3-hydroxybutyrate)(PHB): changes in microstructure and properties through ageing and annealing ».
Industrial Crops and Products, vol. 72.
pp. 166-174.
Lacasse, Simon, Terriault, Patrick, Simoneau, Charles et Brailovski, Vladimir.
2015.
« Design, manufacturing, and testing of an adaptive composite panel with embedded shape memory alloy actuators ».
Journal of Intelligent Material Systems and Structures, vol. 26, nº 15.
pp. 2055-2072.
Lamarche, Louis.
2015.
« Short-time analysis of vertical boreholes, new analytic solutions and choice of equivalent radius ».
International Journal of Heat and Mass Transfer, vol. 91.
pp. 800-807.
Lamraoui, Fayal, Benoit, Robert, Perron, Jean, Fortin, Guy et Masson, Christian.
2015.
« Hybrid fine scale climatology and microphysics of in-cloud icing: From 32km reanalysis to 5 km mesoscale modeling ».
Atmospheric Research, vol. 154.
pp. 175-190.
Lamraoui, Mourad , Barakat, Mustapha , Thomas, Marc et El Badaoui, Mohamed .
2015.
« Chatter detection in milling machines by neural networks classification and feature selection ».
Journal of Vibration and Control, vol. 21, nº 7.
pp. 1251-1266.
Laville, Frédéric, Voix, Jérémie, Doutres, Olivier, Le Cocq, Cécile, Bouthot, Olivier, Sgard, Franck, Nélisse, Hugues, Marcotte, Pierre et Boutin, Jérôme.
2015.
« ÉTS-IRSST Common Infrastructure for Research in Acoustics - ICAR ».
Canadian Acoustics = Acoustique Canadienne, vol. 43, nº 2.
pp. 22-23.
Lavoie, Jacques, Marchand, Geneviève, Cloutier, Yves, Hallé, Stéphane, Nadeau, Sylvie, Duchaine, Caroline et Pichette, Gilbert.
2015.
« Evaluation of bioaerosol exposures during hospital bronchoscopy examinations ».
Environmental Science: Processes & Impacts, vol. 17, nº 2.
pp. 288-299.
Le Dû, M., Dutil, Y., Rousse, D. R., Paradis, P. L. et Groulx, D..
2015.
« Economic and energy analysis of domestic ground source heat pump systems in four Canadian cities ».
Journal of Renewable and Sustainable Energy, vol. 7, nº 5.
053113.
Leger St-Jean, Benjamin, Ménard, Jérémie, Hinse, Stéphanie, Petit, Yvan, Rouleau, Dominique M. et Beauchamp, Marc.
2015.
« Braided tape suture provides superior bone pull-through strength than wire suture in greater tuberosity of the humerus ».
Journal of Orthopaedics, vol. 12, nº Supplement 1.
S14-S17.
Lemaire, R., Bruhier, C., Menage, D., Therssen, E. et Seers, P..
2015.
« Study of the high heating rate devolatilization of a pulverized bituminous coal under oxygen-containing atmospheres ».
Journal of Analytical and Applied Pyrolysis, vol. 114, nº July 2015.
pp. 22-31.
Lemaire, Romain, Lapalme, Denis et Seers, Patrice.
2015.
« Analysis of the sooting propensity of C-4 and C-5 oxygenates: Comparison of sooting indexes issued from laser-based experiments and group additivity approaches ».
Combustion and Flame, vol. 162, nº 9.
pp. 3140-3155.
Lerouge, Sophie, Barrette, Jérémie, Ruiz, Juan-Carlos, Sbai, Marouan, Savoji, Houman, Saoudi, Bachir, Gauthier, Matthieu et Wertheimer, Michael R..
2015.
« Nitrogen-rich plasma polymer coatings for biomedical applications: stability, mechanical properties and adhesion under dry and wet conditions ».
Plasma Processes and Polymers, vol. 12, nº 9.
pp. 882-895.
Lessard, Hugues, Lebrun, Gilbert, Benkaddour, Abdelhaq et Pham, Xuan-Tan.
2015.
« Influence of process parameters on the thermostamping of a [0/90]12 carbon/polyether ether ketone laminate ».
Composites Part A: Applied Science and Manufacturing, vol. 70.
pp. 59-68.
Louhichi, Borhen, Abenhaim, Gad N. et Tahan, Antoine S..
2015.
« CAD/CAE integration: updating the CAD model after a FEM analysis ».
International Journal of Advanced Manufacturing Technology, vol. 76, nº 1.
pp. 391-400.
Louhichi, Borhen, Tlija, Mehdi, Benamara, Abdelmajid et Tahan, Antoine.
2015.
« An algorithm for CAD tolerancing integration: Generation of assembly configurations according to dimensional and geometrical tolerances ».
Computer-Aided Design, vol. 62.
pp. 259-274.
Maamri, Ilyes, Barka, Noureddine, El Ouafi, Abderrazak et Jahazi, Mohammad.
2015.
« A sensitivity study of 4340 steel hardness profile heat-treated by laser ».
International Journal of Emerging Technology and Advanced Engineering, vol. 5, nº 9.
pp. 7-13.
Martin, Alexis et Voix, Jérémie.
2015.
« Identification des biosignaux pour un protecteur auditif ».
[Résumé d'une communication à une conférence]. Travail et Santé, vol. 31, nº 4.
p. 20.
Mebarki, Fouzia et David, Eric.
2015.
« Characterization of the dielectric endurance of reinforced recycled PET using electro-thermal aging test ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 22, nº 6.
pp. 3513-3520.
Medjdoub, Abdellah, David, Éric, Couderc, Hugues et Fréchette, Michel.
2015.
« Study of dielectric properties of HDPE-SIO2 nanocomposite ».
Annales de Chimie: Science des Matériaux, vol. 39, nº 1-2.
pp. 27-39.
Mehmanparast, Hedayeh, Mac-Thiong, Jean-Marc et Petit, Yvan.
2015.
« In vitro evaluation of pedicle screw loosening mechanism: a preliminary study on animal model ».
Scoliosis, vol. 10, nº Suppl 1.
O25.
Mehmanparast, Hedayeh, Petit, Yvan et Mac-Thiong, Jean-Marc.
2015.
« Comparison of pedicle screw loosening mechanisms and the effect on fixation strength ».
Journal of Biomechanical Engineering, vol. 137, nº 12.
Mohammed-Taifour, A., Schwaab, Q., Pioton, J. et Weiss, Julien.
2015.
« A new wind tunnel for the study of pressure-induced separating and reattaching flows ».
Aeronautical Journal, vol. 119, nº 1211.
pp. 91-108.
Mohammed-Taifour, Abdelouahab, Weiss, Julien, Sadeghi, Atabak, Vétel, Jerôme, Jondeau, Emmanuel et Comte-Bellot, Geneviève.
2015.
« A detailed procedure for measuring turbulent velocity fluctuations using constant-voltage anemometry ».
Experiments in Fluids, vol. 56, nº 9.
Mokhtabad Amrei, Mohsen, Verreman, Yves, Bridier, Florent, Thibault, Denis et Bocher, Philippe.
2015.
« Microstructure characterization of single and multipass 13Cr4Ni steel welded joints ».
Metallography, Microstructure, and Analysis, vol. 4, nº 3.
pp. 207-218.
Muller, Yann-Aël, Aubrun, Sandrine et Masson, Christian.
2015.
« Determination of real-time predictors of the wind turbine wake meandering ».
Experiments in Fluids, vol. 56, nº 3.
Mullier, Guillaume et Chatelain, Jean-François.
2015.
« Influence of thermal damage on the mechanical strength of trimmed CFRP ».
International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, vol. 9, nº 8.
pp. 1509-1516.
Nadon, Vincent, Bockstael, Annelies, Botteldooren, Dick, Lina, Jean-Marc et Voix, Jérémie.
2015.
« Individual monitoring of hearing status : Development and validation of advanced techniques to measure otoacoustic emissions in suboptimal test conditions ».
Applied Acoustics, vol. 89.
pp. 78-87.
Najjari, Morteza et Guilbault, Raynald.
2015.
« Formula derived from particle swarm optimization (PSO) for optimum design of cylindrical roller profile under EHL regime ».
Mechanism and Machine Theory, vol. 90.
pp. 162-174.
Nélisse, Hugues, Le Cocq, Cécile, Boutin, Jérôme, Laville, Frédéric et Voix, Jérémie.
2015.
« Systematic evaluation of the relationship between physical and psychoacoustical measurements of hearing protectors' attenuation ».
Journal of Occupational and Environmental Hygiene, vol. 12, nº 12.
pp. 829-844.
Ngô, Anh Dung, Ho, Thu Nga et Sefrioui Manar, Khalid.
2015.
« Environmental effects on the static and fatigue behaviours of hemp fibre under tensile loading ».
[Article de conférence]. Applied Mechanics and Materials, vol. 798.
pp. 410-418.
Nguyen, Sy Quy et Chatelain, Jean-Francois.
2015.
« Study of the milling process for thin components using a flexible setup configuration ».
[Article de conférence]. Applied Mechanics and Materials, vol. 704.
pp. 27-31.
Nguyen, Thi-Hong-Dang et Dao, Thien-My.
2015.
« Supply chain milk-run delivery optimization ».
Journal of Management and Engineering Integration, vol. 8, nº 1.
pp. 29-40.
Niknam, Seyed Ali et Songmene, Victor.
2015.
« Milling burr formation, modeling and control: A review ».
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 229, nº 6.
pp. 893-909.
Ouaret, Samir, Kenné, Jean-Pierre, Gharbi, Ali et Polotski, Vladimir.
2015.
« Joint production and replacement strategy for a quality deteriorating failure-prone manufacturing system ».
[Article de conférence]. IFAC-PapersOnLine, vol. 48, nº 3.
pp. 1198-1203.
Paquin, Mathieu, Thibault, Denis, Bocher, Philippe, Lévesque, Jean-Benoît, Verreman, Yves et Shinozaki, Kenji.
2015.
« Assessment of cold cracking tests for low transformation temperature martensitic stainless steel multipass welds ».
Welding in the World, vol. 59, nº 4.
pp. 521-532.
Paradis, Pierre-Luc, Rousse, Daniel R., Hallé, Stéphane, Lamarche, Louis et Quesada, Guillermo.
2015.
« Thermal modeling of evacuated tube solar air collectors ».
Solar Energy, vol. 115.
pp. 708-721.
Polotski, Vladimir, Kenné, Jean-Pierre et Gharbi, Ali.
2015.
« Failure-prone manufacturing systems with setups: feasibility and optimality under various hypotheses about perturbations and setup interplay ».
International Journal of Mathematics in Operational Research, vol. 7, nº 6.
pp. 681-705.
Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali.
2015.
« Optimal production scheduling for hybrid manufacturing-remanufacturing systems with setups ».
Journal of Manufacturing Systems, vol. 37.
pp. 703-714.
Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali.
2015.
« Production and setup policy optimization for hybrid manufacturing-remanufacturing systems ».
[Article de conférence]. IFAC-PapersOnLine, vol. 48, nº 3.
pp. 2021-2026.
Prokoshkin, S., Brailovski, V., Inaekyan, K., Demers, V. et Kreitcberg, A..
2015.
« Nanostructured Ti–Ni shape memory alloys produced by thermomechanical processing ».
Shape Memory and Superelasticity, vol. 1, nº 2.
pp. 191-203.
Quesada, Guillermo, Guillon, Laura, Rousse, Daniel R., Mehrtash, Mostafa, Dutil, Yvan et Paradis, Pierre-Luc.
2015.
« Tracking strategy for photovoltaic solar systems in high latitudes ».
Energy Conversion and Management, vol. 103.
pp. 147-156.
Rahman, M. H., Rahman, M. J., Cristobal, O. L., Saad, Maarouf, Kenné, Jean-Pierre et Archambault, P. S..
2015.
« Development of a whole arm wearable robotic exoskeleton for rehabilitation and to assist upper limb movements ».
Robotica, vol. 33, nº 1.
pp. 19-39.
Raymond, Jasmin, Lamarche, Louis et Malo, Michel.
2015.
« Field demonstration of a first thermal response test with a low power source ».
Applied Energy, vol. 147.
pp. 30-39.
Robe, Hugo, Zedan, Yasser, Chen, Jianqiang, Monajati, Hossein, Feulvarch, Eric et Bocher, Philippe.
2015.
« Microstructural and mechanical characterization of a dissimilar friction stir welded butt joint made of AA2024-T3 and AA2198-T3 ».
Materials Characterization, vol. 110.
pp. 242-251.
Rojo, C., Vancassel, X., Mirabel, P., Ponche, J. L. et Garnier, François.
2015.
« Impact of alternative jet fuels on aircraft-induced aerosols ».
Fuel, vol. 144.
pp. 335-341.
Roth, S.N., Lacombe, A., Léger, P. et Soulaimani, A..
2015.
« Coupled hydromechanical cracking of concrete arch dams considering drainage efficiency ».
[Article de conférence]. Dam Engineering, vol. 25, nº 4.
pp. 143-155.
Roth, Simon-Nicolas, Léger, Pierre et Soulaïmani, Azzeddine.
2015.
« A combined XFEM-damage mechanics approach for concrete crack propagation ».
Computer Methods in Applied Mechanics and Engineering, vol. 283.
pp. 923-955.
Rousseau, Clement, Comlan Fannou, Jean-Louis, Lamarche, Louis, Ouzzane, Mohamed et Kajl, Stanislaw.
2015.
« Modeling and experimental validation of a transient direct expansion geothermal heat exchanger ».
Geothermics, vol. 57.
pp. 95-103.
Saidi, M. N., Songmene, Victor, Kouam, J. et Bahloul, A..
2015.
« Experimental investigation on fine particle emission during granite polishing process ».
International Journal of Advanced Manufacturing Technology, vol. 81, nº 9.
pp. 2109-2121.
Sarafan, S., Wanjara, P., Champliaud, Henri et Thibault, D..
2015.
« Characteristics of an autogenous single pass electron beam weld in thick gage CA6NM steel ».
International Journal of Advanced Manufacturing Technology, vol. 78, nº 9.
pp. 1523-1535.
Savaria, V., Monajati, H., Bridier, F. et Bocher, Philippe.
2015.
« Measurement and correction of residual stress gradients in aeronautical gears after various induction surface hardening treatments ».
Journal of Materials Processing Technology, vol. 220.
pp. 113-123.
Savoji, Houman, Lerouge, Sophie, Ajji, Abdellah et Wertheimer, Michael R..
2015.
« Plasma-etching for controlled modification of structural and mechanical properties of electrospun PET scaffolds ».
Plasma Processes and Polymers, vol. 12, nº 4.
pp. 314-327.
Seers, P., Nachin, G. et Glaus, M..
2015.
« Development of two driving cycles for utility vehicles ».
Transportation Research Part D: Transport and Environment, vol. 41.
pp. 377-385.
Semenou, Thomas, Rousse, Daniel R., Le Lostec, Brice, Nouanegue, Hervé F. et Paradis, Pierre-Luc.
2015.
« Mathematical modeling of dual intake transparent transpired solar collector ».
Mathematical Problems in Engineering, vol. 2015.
Serra, Roger, Garibaldi, Luigi, Maia, Nuno M. et Thomas, Marc.
2015.
« Experimental Shock and Vibration Analysis ».
Shock and Vibration, vol. 2015.
Sheremetyev, V. A., Prokoshkin, S. D., Brailovski, V., Dubinskiy, S. M., Korotitskiy, A. V., Filonov, M. R. et Petrzhik, M. I..
2015.
« Investigation of the structure stability and superelastic behavior of thermomechanically treated Ti-Nb-Zr and Ti-Nb-Ta shape-memory alloys ».
Physics of Metals and Metallography, vol. 116, nº 4.
pp. 413-422.
Sheremetyev, V., Prokoshkin, S., Brailovski, V., Dubinskiy, S., Filonov, M. et Petrzhik, M..
2015.
« Long-term stability of superelastic behavior of nanosubgrained Ti-Nb-Zr and Ti-Nb-Ta shape memory alloys ».
[Article de conférence]. Materials Today: Proceedings, vol. 2, nº suppl. 1.
S26-S31.
Slamani, Mohamed, Chatelain, Jean-François et Hamedanianpour, Hossein.
2015.
« Comparison of two models for predicting tool wear and cutting force components during high speed trimming of CFRP ».
International Journal of Material Forming, vol. 8, nº 2.
pp. 305-316.
Slamani, Mohamed, Gauthier, Sébastien et Chatelain, Jean-François.
2015.
« A study of the combined effects of machining parameters on cutting force components during high speed robotic trimming of CFRPs ».
Measurement: Journal of the International Measurement Confederation, vol. 59.
pp. 268-283.
Stinville, J. C., Bridier, F., Ponsen, D., Wanjara, P. et Bocher, Philippe.
2015.
« High and low cycle fatigue behavior of linear friction welded Ti-6Al-4V ».
International Journal of Fatigue, vol. 70.
pp. 278-288.
Stinville, J. C., Vanderesse, N., Bridier, F., Bocher, P. et Pollock, T. M..
2015.
« High resolution mapping of strain localization near twin boundaries in a nickel-based superalloy ».
Acta Materialia, vol. 98.
pp. 29-42.
Strano, Matteo, Marra, Alessandro, Mussi, Valerio, Goletti, Massimo et Bocher, Philippe.
2015.
« Endurance of damping properties of foam-filled tubes ».
Materials, vol. 8, nº 7.
pp. 4061-4079.
Tahvilian, Amir Masoud, Liu, Zhaoheng, Champliaud, Henri, Hazel, Bruce et Lagacé, Marin.
2015.
« Characterization of grinding wheel grain topography under different robotic grinding conditions using confocal microscope ».
International Journal of Advanced Manufacturing Technology, vol. 80, nº 5.
pp. 1159-1171.
Tehrani, Mahdi Mohammadi, Beauregard, Yvan, Rioux, Michel, Kenne, Jean Pierre et Ouellet, Rejean.
2015.
« A predictive preference model for maintenance of a heating ventilating and air conditioning system ».
[Article de conférence]. IFAC-PapersOnLine, vol. 48, nº 3.
pp. 130-135.
Tongne, A., Jahazi, Mohammad, Feulvarch, E. et Desrayaud, C..
2015.
« Banded structures in friction stir welded Al alloys ».
Journal of Materials Processing Technology, vol. 221.
pp. 269-278.
Toselli, M., Fabiani, D., Mancinelli, P., Fréchette, M., Heid, T., David, Éric et Saccani, A..
2015.
« In situ thermal reduction of graphene oxide forming epoxy nanocomposites and their dielectric properties ».
Polymer Composites, vol. 36, nº 2.
pp. 294-301.
Toubal, Lotfi, Bocher, Philippe et Moreau, André.
2015.
« Bimodal dwell-fatigue Weibull distribution of forged titanium IMI 834 ».
International Journal of Damage Mechanics, vol. 24, nº 5.
pp. 629-645.
Tremblay, Jaëlle, Mac-Thiong, Jean-Marc, Brailovski, Vladimir et Petit, Yvan.
2015.
« Braided tubular superelastic cables provide improved spinal stability compared to multifilament sublaminar cables ».
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol. 229, nº 9.
pp. 645-651.
Tremblay, Jaëlle, Mac-Thiong, Jean-Marc, Brailovski, Vladimir et Petit, Yvan.
2015.
« Factors affecting intradiscal pressure measurement during in vitrobiomechanical tests ».
Scoliosis, vol. 10, nº Suppl 1.
O19.
Triki, Ennouri, Nguyen-Tri, Phuong, Gauvin, Chantal, Azaiez, Meriam et Vu-Khanh, Toan.
2015.
« Combined puncture/cutting of elastomer membranes by pointed blades: characterization of mechanisms ».
Journal of Applied Polymer Science, vol. 132, nº 26.
Trudel, Bryan, Nadeau, Sylvie, Zaras, Kazimierz et Deschamps, Isabelle.
2015.
« Managing equipment innovations in mining: A review ».
Work: A Journal of Prevention, Assessment & Rehabilitation, vol. 51, nº 4.
pp. 731-746.
Valentin, Olivier et Laville, Frédéric.
2015.
« Use of auditory steady-state responses in measuring the occlusion effect of hearing protection devices ».
Canadian Acoustics = Acoustique Canadienne, vol. 43, nº 3.
Viallet, Guilhem, Sgard, Franck, Laville, Frédéric et Nelisse, Hugues.
2015.
« Investigation of the variability in earplugs sound attenuation measurements using a finite element model ».
Applied Acoustics, vol. 89.
pp. 333-344.
Vinches, Ludwig et Hallé, Stéphane.
2015.
« La peau est-elle vraiment imperméable aux nanoparticules? ».
Bulletin de Veille Scientifique, nº 27.
pp. 12-15.
Voix, Jérémie.
2015.
« Sonomax-ÉTS industrial research chair in in-ear technologies ».
Canadian Acoustics = Acoustique Canadienne, vol. 43, nº 2.
pp. 48-49.
Watson, Sean, Nisol, Bernard, Lerouge, Sophie et Wertheimer, Michael Robert.
2015.
« Energetics of molecular excitation, fragmentation, and polymerization in a dielectric barrier discharge with argon carrier gas ».
Langmuir, vol. 31, nº 37.
pp. 10125-10129.
Weiss, Julien, Mohammed-Taifour, Abdelouahab et Schwaab, Quentin.
2015.
« Unsteady behavior of a pressure-induced turbulent separation bubble ».
AIAA Journal, vol. 53, nº 9.
pp. 2634-2645.
Zheng, J., Xie, W. F., Viens, Martin, Birglen, L. et Mantegh, I..
2015.
« Design of an advanced automatic inspection system for aircraft parts based on fluorescent penetrant inspection analysis ».
Insight: Non-Destructive Testing and Condition Monitoring, vol. 57, nº 1.
18-24 and 34.
Zhukova, Y. S., Pustov, Y. A., Konopatsky, A. S., Dubinskiy, S. M., Filonov, M. R. et Brailovski, V..
2015.
« Corrosion fatigue and electrochemical behavior of superelastic Ti-Nb-Ta alloy for medical implants under cyclic load conditions ».
[Article de conférence]. Materials Today: Proceedings, vol. 2, nº Supp. 3.
S991-S994. Compte rendu de conférence
Abed, Asmaa, Bouzidane, Ahmed, Thomas, Marc, Zahloul, Hamou et Nemchi, Amina.
2015.
« Performance characteristics of a new electrorheological valve three-pad hydrostatic squeeze film dampers ».
In 1st International Conference on Tribology (Turkeytrib'15) (Istanbul, Turkey, Oct. 7-9, 2015)
Abid, Alexandre, Thakare, Dhawal, Pereira, Daniel, Rajagopal, Prabu, Fernandes, Julio et Bélanger, Pierre.
2015.
« Guided wave velocity sensitivity to bone mechanical property evolution in cortical-marrow and cortical-trabecular phantoms ».
In 170th Meeting of the Acoustical Society of America (Jacksonville, FL, USA, Nov. 2-6, 2015)
AboShighiba, Hicham, Bouzidane, Ahmed, Ghezal, Faiza, Thomas, Marc, Nemchi, Amina et Abed, Asmaa.
2015.
« Turbulent and inertia effects on the pressure distribution in orifice compensated hydrostatic bearing using numerical simulations via navier stokes ».
In 1st International Conference on Tribology (Turkeytrib'15) (Istanbul, Turkey, Oct. 7-9, 2015)
Agnard, Stéphane, Liu, Zhaoheng et Hazel, Bruce.
2015.
« Material removal and wheel wear models for robotic grinding wheel profiling ».
In 2nd Int. Materials, Industrial, and Manufacturing Engineering Conference, MIMEC2015 (Bali, Indonesia, Feb. 4-6, 2015)
Coll. « Procedia Manufacturing », vol. 2.
pp. 35-40.
Ahmadabadi, Zahra Nili, Laville, Frédéric et Guilbault, Raynald.
2015.
« Study of parameters influencing pneumatic nail-gun noise ».
In 44th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2015 (San Francisco, CA, USA, Aug. 9-12, 2015)
pp. 17-28.
The Institute of Noise Control Engineering of the USA, Inc..
Ahmadi, Golestan, Khosravi, G., Hallé, S. et Morency, F..
2015.
« Modelling particle dispersion in a turbulent channel flow by using CFD ».
In The 2015 AMMCS-CAIMS Congress (Waterloo, ON, Canada, June 7-10, 2015)
Aidibe, Ali et Tahan, Antoine.
2015.
« The Coherent Point Drift algorithm adapted for fixtureless metrology of non-rigid parts ».
In 13th CIRP Conference on Computer Aided Tolerancing, CAT 2014, May 11, 2014 - May 14, 2014 (Hangzhou, China, May 11-14, 2014)
Coll. « Procedia CIRP », vol. 27.
pp. 84-89.
Elsevier.
Aranas, Clodualdo, Grewal, Rupanjit, Chadha, Kanwal, Shahriari, Davood, Jahazi, Mohammad et Jonas, John J..
2015.
« Formation of widmanstätten ferrite in a C-Mn steel at temperatures high in the austenite phase field ».
In International Conference on Solid-Solid Phase Transformations in Inorganic Materials 201 (PTM 2015) (Whistler, BC, Canada, June 28, 2015 - July 3, 2015)
pp. 613-620.
International Conference on Solid-Solid Phase Transformations in Inorganic Materials.
Arteau, Jean, Beauchamp, Yves, Langlais, Ian et Vachon, Frédéric.
2015.
« Arborists’ harness for work at height and fall protection ».
In Frühjahrskongress 2015 der Gesellschaft für Arbeitswissenschaft GfA (Karlsruhe, Germany, Feb. 25-27, 2015)
Dortmund : GfA-Press.
Aubrun, S., Muller, Y. A. et Masson, Christian.
2015.
« Predicting wake meandering in real-time through instantaneous measurements of wind turbine load fluctuations ».
In Wake Conference 2015 (Visby, Sweden, June 9-11, 2015)
Coll. « Journal of Physics: Conference Series », vol. 625.
UK : IOP Publishing.
Aventin, Agathe, Morency, François et Nadeau, Sylvie.
2015.
« Statistical study of aircraft accidents and incidents related to de/anti-icing process in Canada between 2009 and 2014 ».
In 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference. Abstract book (Montreal, QC, Canada, May 19-21, 2015)
pp. 201-209.
Badache, Messaoud, Eslami Nejad, Parham, Oussane, Mohamed, Aidoun, Zine et Lamarche, Louis.
2015.
« Nouvelle approche pour l'évaluation du profil de température du sol ».
In XII Colloque interuniversitaire franco-québécois (CIFQ 2015) (Sherbrooke, QC, Canada, 8-10 juin 2015)
Bagayoko, M., Dao, Thien-My et Ateme-Nguema, B. H..
2015.
« Forest vehicle routing problem solved by New Insertion and meta-heuristics ».
In 2015 International Conference on Industrial Engineering and Operations Management (IEOM). Proceedings (Dubai, United Arab Emirates, Mar. 3-5, 2015)
Piscataway, N. J., USA : IEEE.
Bahloul, A., Djebara, A., Saidi, M. N. et Songmene, V..
2015.
« Simulating grinding dust dispersion and assessment of the efficiency of local capture ventilation ».
In Proceedings of the 11th International Conference on Industrial Ventilation (Ventilation 2015) (Shanghai, China, Oct. 26-28, 2015)
pp. 598-605.
International Conference on Industrial Ventilation.
Bautista, Mary C., Dufresne, Louis et Masson, Christian.
2015.
« Hybrid turbulence models for atmospheric flow: A proper comparison with RANS models ».
In 2nd Symposium on OpenFOAM in Wind Energy (SOWE2014) (Boulder, CO, USA, May 19-21, 2014)
Coll. « E3S Web of Conferences », vol. 5.
EDP Sciences.
Beardsell, Guillaume, Dufresne, Louis et Dumas, Guy.
2015.
« Investigation of the reconnection process of two vortices through spectral simulations ».
In 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference (Montreal, QC, Canada, May 19-21, 2015)
Canadian Aeronautics and Space Institute.
Beauregard, Yvan.
2015.
« Surprises and cost overruns: a lean risk management approach to reduce surprises and address cost overruns in aerospace product development projects ».
In International Annual Conference of the American Society for Engineering Management 201 (ASEM) (Indianapolis, IN, USA, Oct. 7-10, 2015)
pp. 249-254.
American Society for Engineering Management.
Belanger, Pierre.
2015.
« Remnant thickness mapping using high order shear horizontal modes ».
In ASNT 24th research symposium (Anaheim, CA, USA, Mar. 16-19, 2015)
American Society for Nondestructive Testing.
Ben Mosbah, Abdallah, Ayrault, Tristan, Flores, Manuel, Botez, Ruxandra et Dao, Thien-My.
2015.
« EGD-ANN model to predict actuators displacements for an open-loop morphing wing system ».
In 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference (AERO 2015) (Montreal, QC, Canada, May 19-21, 2015)
Canadian Aeronautics and Space Institute.
Bernier, Antoine et Voix, Jérémie.
2015.
« Active musician's hearing protection device for enhanced perceptual comfort ».
In Euronoise 2015, the 10th European Congress and Exposition on Noise Control Engineering (Maastrich, The Netherlands, May 31-June 3, 2015)
EAA-NAG-ABAV.
Birglen, Lionel, Leblanc, Benoit, Maldague, Xavier, Mantegh, Iraj, Roberge, Sylvain, Viens, Martin et Xie, Wen-fang.
2015.
« Introduction of a robotic system for aerospace manufacturing: The case for non-destructive inspection and beyond ».
In 62nd CASI Aeronautics Conference (Montreal, QC, Canada, May 19-21, 2015)
Blancke, Olivier, Amyot, Normand, Hudon, Claude, Lévesque, Mélanie et Tahan, Antoine.
2015.
« A new generic approach to convert FMEA in causal trees for the purpose of hydro-generator rotor failure mechanisms identification ».
In Annual Conference of the Prognostics and Health Management Society 2015 (Coronado, CA, USA, Oct. 18-24, 2015)
PHM Society.
Boudreau-Trudel, Bryan, Nadeau, Sylvie et Zaras, Kazimierz.
2015.
« Introduction of mining equipment: key factors for sustainable development ».
In The Proceedings of the 19th Triennial Congress of the International Ergonomics Association. Melbourne, 9-14 August, 2015 (Melbourne, Australia, Aug. 9-14, 2015)
International Ergonomics Association.
Boukadida, M., Rousse, D. R. et Morency, F..
2015.
« Étude de l'écoulement dans un collecteur solaire à tubes sous-vide ouverts des deux côtés ».
In Comptes rendus du XIIème Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (Sherbrooke, QC, Canada, 8-10 juin 2015)
Boukani, H. H., Chentouf, S. M., Viens, Martin, Tahan, S.-Antoine et Gagnon, M..
2015.
« The effect of martensitic stainless steel microstructure on the ultrasonic inspection of turbine runner joints ».
In AIP Conference Proceedings (Boise, ID, USA, July 20-25, 2014)
pp. 909-916.
USA : AIP - American Institute of Physics.
Bouriga, Mohamed, Morency, François et Weiss, Julien.
2015.
« Numerical investigation of wall mounting effects in semi-span wind-tunnel tests ».
In 53rd AIAA Aerospace Sciences Meeting (Kissemmee, FL, USA, Jan. 5-9, 2015)
Coll. « AIAA Paper »
American Institute of Aeronautics and Astronautics.
Bouserhal, Rachel E., Falk, Tiago et Voix, Jérémie.
2015.
« On the potential for artificial bandwidth extention of bone and tissue conducted speech: a mutual information study ».
In 2015 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP) (South Brisbane, QLD, Australia, Apr. 19-24, 2015)
pp. 5108-5112.
Piscataway, NJ, USA : IEEE.
Bouserhal, Rachel E., Voix, Jérémie et Falk, Tiago.
2015.
« Modeling speech production in noise for the assessment of vocal effort for use with communication headsets ».
In Euronoise 2015, the 10th European Congress and Exposition on Noise Control Engineering (Maastrich, The Netherlands, May 31-June 3, 2015)
pp. 1633-1637.
Bouzid, Abdel-Hakim.
2015.
« Safety and reliability assessment of a miniature steam generator ».
In Proceedings 19th Triennial Congress of the International Ergonomics Association (Melbourne, Australia, Aug. 9-14, 2015)
International Ergonomics Association.
Bouzid, Abdel-Hakim et Kazeminia, Mehdi.
2015.
« Effect of reverse yielding on the residual contact stresses of tube-to-tubesheet joints subjected to hydraulic expansion ».
In ASME 2015 Pressure Vessels and Piping Conference (Boston, MA, USA, July 19-23, 2015)
Coll. « ASME Proceedings »
American Society of Mechanical Engineers.
Brummund, Martin, Brailovski, Vladimir, Facchinello, Yann, Petit, Yvan et Mac-Thiong, Jean-Marc.
2015.
« Implementation of a 3D porcine lumbar finite element model for the simulation of monolithic spinal rods with variable flexural stiffness ».
In 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (Milan, Italy, Aug. 25-29, 2015)
pp. 917-920.
Piscataway, NJ, USA : IEEE.
Camara, D., Nadeau, S. et Echchakoui, S..
2015.
« Perceptions des mineurs de mines ultraprofondes ».
In 37e Congrès AQHSST (Saint-Sauveur, QC, Canada, 20-22 mai 2015)
Cardonne, M., Khay, M., Vachon, P. L., Dubé, M. et Ngô, A. D..
2015.
« Effect of high temperature on the fatigue behaviour of a plain weave CFRP laminate under tension-tension loading ».
In 20th International Conference on Composite Materials (ICCM 2015) (Copenhagen, Denmark, July 19-24, 2015)
International Committee on Composite Materials.
Cardonne, M., Khay, M., Vachon, P. L., Dubé, M. et Ngô, A. D..
2015.
« Effect of high temperature on the fatigue life of a plain weave CFRP laminate under tension-tension loading ».
In 20th International Conference on Composite Materials (ICCM20) (Copenhagen, Denmark, July 19-24, 2015)
MSI Scandinavia.
Chabour, H., Ibrahim, H., Rousse, D. R. et Ilinca, A..
2015.
« Study and conception of heat recovery system for hybrid power plant - development of thermal design software ».
In Proceedings of the 28th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2015 (Pau, France, June 29‐July 3, 2015)
Chadha, K., Shahriari, D. et Jahazi, M..
2015.
« Constitutive modelling of ingot breakdown process of low alloy steels ».
In 6th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (SteelSim 2015) (Bardolino, Italy, Sept. 23-25, 2015)
Associazione Italiana di Metallurgia.
Chadha, Kanwal, Bhattacharjee, Pinaki Prasad et Jahazi, Mohammad.
2015.
« The effect of strain reversal during high pressure torsion on the microstructure evolution and texture of aluminum alloys ».
In Characterization of Minerals, Metals, and Materials 2015 - TMS 2015 144th Annual Meeting and Exhibition, March 15, 2015 - March 19, 2015 (Orlando, FL, USA, March 15-19, 2015)
Coll. « TMS Annual Meeting »
pp. 107-114.
Minerals, Metals and Materials Society.
Chadha, Kanwal, Jahazi, Mohammad, Loucif, Abdelhalim et Shahriari, Davood.
2015.
« Effect of deformation temperature and interpass time on microstructure evolution and mechanical properties of medium carbon low alloy steel during ingot breakdown process ».
In 2015 TMS Annual Meeting & Exhibition : Phase Transformations and Microstructural Evolution (Orlando, FL, Canada, Mar. 15-19, 2015)
Chentouf, Samir Mourad, Belhadj, T., Bombardier, N. et Jahazi, M..
2015.
« Influence of reduction rate on the characteristics of cavities in superplastically formed 5083 aluminum alloy ».
In 54th annual conference of metallurgists (COM 2015) (Toronto, ON, Canada, Aug. 23-26, 2015)
Cherbal, Samira et Lamarche, Louis.
2015.
« Système mixte de chauffage et climatisation résidentiel avec capteurs solaires et stockage souterrain ».
In XII Colloque interuniversitaire franco-québécois (CIFQ 2015) (Sherbrooke, QC, Canada, 8-10 juin 2015)
Chikh, M. L., Lateb, M., Morency, F. et Garnier, F..
2015.
« Numerical investigation of an ethane-air diffusion flame using various reaction mechanisms ».
In 23rd Annual Conference of the Computational Fluid Dynamics Society of Canada (CFDS2015) (Waterloo, ON, Canada, June 7-10, 2015)
Chouak, Mohamed, Mousseau, Alexandre, Reveillon, Damien, Dufresne, Louis et Seers, Patrice.
2015.
« Study of transient effects in the internal flow of a diesel fuel injector ».
In SAE 2015 World Congress and Exhibition (Detroit, MI, USA, Apr. 21-23, 2015)
Coll. « SAE Technical Papers », vol. 2015-01-0923.
Society of Automotive Engineers.
Couderc, H., Fréchette, M. et David, E..
2015.
« Fabrication and dielectric properties of polypropylene / silica nano-composites ».
In 2015 Electrical Insulation Conference (EIC) (Seattle, WA, USA, June 7-10, 2015)
pp. 329-332.
Piscataway, NJ, USA : IEEE.
Couderc, H., Fréchette, M. et David, E..
2015.
« Thermal and dielectric properties evaluation of low density polyethylene - Boron Nitride - Carbon Black nanocomposites ».
In 2015 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Ann Arbor, MI, USA, Oct. 18-21, 2015)
pp. 535-538.
Piscataway, NJ, USA : IEEE.
Couderc, H., Vanga, C., Fréchette, M. et David, E..
2015.
« Fabrication and dielectric properties of highly loaded polypropylene micro- and nano-composites ».
In 2015 Electrical Insulation Conference (EIC) (Seattle, WA, USA, June 7-10, 2015)
pp. 238-242.
Piscataway, NJ, USA : IEEE.
Dang, D-D. et Pham, X. T..
2015.
« Numerical analysis of turbulent convective heat transfer in a rotor-stator configuration ».
In 23rd Annual Conference of the Computational Fluid Dynamics Society of Canada (CFDSC 2015) (Waterloo, ON, Canada, June 7-12, 2015)
Dang, Nguyen Thi Hong et Dao, Thien My.
2015.
« Optimizing the design of lean supply chain using the meta-heuristic approach: a case study ».
In Proceedings of the Asia Pacific Industrial Engineering & Management Systems Conference (Ho Chi Minh City, Vietnam, Sept. 6-9, 2015)
pp. 1964-1971.
APIEM.
David, E., Zazoum, B., Fréchette, M. F. et Rogti, F..
2015.
« Dielectric response of HDPE/clay nanocomposites containing 10%wt of organo-modified clay ».
In 2015 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Ann Arbor, MI, USA, Oct. 18-21, 2015)
pp. 531-534.
Piscataway, NJ, USA : IEEE.
Delnavaz, Aidin et Voix, Jérémie.
2015.
« Piezo-magnetic energy harvesting from movement of the head ».
In The 15th International Conference on Micro and Nanotechnology for Power Generation and Energy Conversion Applications (PowerMEMS 2015) (Boston, MA, USA, Dec, 1-4, 2015)
Coll. « Journal of Physics: Conference Series », vol. 660.
IOP Publishing.
Demy, F., Nadeau, Sylvie et Kenné, Jean-Pierre.
2015.
« Integration of production planning, scheduling and lockout/tagout activities in a manufacturing system ».
In Gesellschaft für Arbeitswissenschaft (Karlsruhe, Germany, Feb. 25-27, 2015)
Doutres, Olivier, Caron L'Ecuyer, Alexis, Kathirchelvan, Thineshan et Etchessahar, Manuel.
2015.
« Experimental assessment of the structure-borne noise in an aircraft cabin due to vibrating equipment ».
In INTER-NOISE and NOISE-CON Congress and Conference Proceedings, InterNoise15 (San Francisco, CA, USA, Aug. 9-12, 2015)
pp. 4790-4801.
INCE-USA.
Doutres, Olivier, Ouisse, Morvan, Atalla, Noureddine et Ichchou, Mohamed.
2015.
« Unit-cell variability and micro-macro modeling of polyurethane acoustic foams ».
In Euronoise 2015, the 10th European Congress and Exposition on Noise Control Engineering (Maastrich, The Netherlands, May 31-June 3, 2015)
pp. 2467-2472.
Doutres, Olivier, Sgard, Franck et Viallet, Guilhem.
2015.
« Measurement of earplugs insertion loss using a classical impedance tube ».
In INTER-NOISE and NOISE-CON Congress and Conference Proceedings, InterNoise15 (San Francisco, CA, USA, Aug. 9-12, 2015)
pp. 4114-4124.
INCE-USA.
Dubot, F., Favennec, Y., Rousseau, B. et Rousse, D. R..
2015.
« Determination of space-dependent radiative properties in diffuse optical tomography using a wavelet multi-scale method ».
In Proceedings of the Computational Thermal Radiation in Participating Media Conference (CTRPM5) (Albi, France, Apr. 1-3, 2015)
Dubot, F., Favennec, Y., Rousseau, B. et Rousse, D. R..
2015.
« Une méthode inverse multi-échelle basée sur les ondelettes pour la résolution du problème de tomographie optique diffuse ».
In Comptes rendus du XIIème Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (Sherbrooke, QC, Canada, 8-10 juin 2015)
El Domiaty, Aly, Mourad, Abdel-Hamid et Bouzid, Abdel-Hakim.
2015.
« A proposed generalized model for forming limit diagram ».
In ASME 2015 Pressure Vessels and Piping Conference (Boston, MA, USA, July 19–23, 2015)
Coll. « ASME Proceedings »
American Society of Mechanical Engineers (ASME).
El Wazziki, M. et Ngo, A. D..
2015.
« Modelling of compression moulding process cycle time for carbon fibre reinforced thermoplastic flat panels ».
In Design, manufacturing and applications of composites : proceedings of the Tenth Joint Canada-Japan Workshop on Composites, the University of British Columbia, Vancouver, Canada, August 2014 (Vancouver, BC, Canada, Aug. 19-21, 2014)
pp. 222-230.
DEStech Publications inc..
El Wazziki, M., Ngo, A. D. et Leblanc, D..
2015.
« Modelling of compression moulding process cycle time and application of dfma concept to evaluate the tooling costs for carbon fiber reinforced thermoplastic composites t-shape parts ».
In 20th International Conference on Composite Materials (ICCM20) (Copenhagen, Denmark, July 19-24, 2015)
MSI Scandinavia.
El Wazziki, Mohamed et Ngo, Anh Dung.
2015.
« Modelling of compression moulding process cycle time for carbon fibre reinforced thermoplastic concave parts ».
In Canadian - International Conference on Composites (Cancom 2015) (Edmonton, AB, Canada, Aug. 18-20, 2015)
Facchinello, Yann, Brailovski, Vladimir, Petit, Yvan, Brummund, Martin, Tremblay, Jaelle et Mac-Thiong, Jean-Marc.
2015.
« In-vitro assessment of the stabilization capacity of monolithic spinal rods with variable flexural stiffness: methodology and examples ».
In 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (Milan, Italy, Aug. 25-29, 2015)
pp. 3913-3916.
Piscataway, NJ, USA : IEEE.
Farahani, R. D., Kaganj, A. B., Hojjati, M. S., Hoa, Van et Dubé, M..
2015.
« Manufacturing of double-curvature CF/PPS continuous-fibre woven thermoplastic composite parts through stamp forming ».
In 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference (Montreal, QC, Canada, May 19-21, 2015)
Farahani, Rouhollah Dermanaki, Tavarez, Jason et Dubé, Martine.
2015.
« Carbon nanotube-based conductive films for induction welding of thermoplastic polymers and composites ».
In 20th International Conference on Composite Materials (ICCM20) (Copenhagen, Denmark, July 19-24, 2015)
MSI Scandinavia.
Favennec, Y., Le Hardy, D., Dubot, F., Rousseau, B. et Rousse, D. R..
2015.
« Some speed-up strategies for solving inverse radiative transfer problems ».
In Proceedings of the Computational Thermal Radiation in Participating Media Conference (CTRPM5) (Albi, France, Apr. 1-3, 2015)
Feng, Zhengkun et Champliaud, Henri.
2015.
« Modeling and simulation based on finite element method for electron beam welding process ».
In 27th European Modeling and Simulation Symposium (EMSS) (Bergeggi, Italy, Sept. 21-23, 2015)
pp. 79-83.
Dime University of Genoa.
Feng, Zhengkun et Champliaud, Henri.
2015.
« Modeling and simulation for pressing process with reconfigurable punch and die ».
In ASME 2015 Pressure Vessels and Piping Conference (Boston, MA, USA, July 19-23, 2015)
Coll. « ASME Proceedings »
American Society of Mechanical Engineers.
Fréchette, M. F., Vanga-Bouanga, C. et David, E..
2015.
« Epoxy containing micro-nano carbonaceous composite additives ».
In 2015 IEEE 11th International Conference on the Properties and Applications of Dielectric Materials (ICPADM) (Sydney, NSW, Australia, July 19-22, 2015)
pp. 280-284.
Piscataway, NJ, USA : IEEE.
Fréchette, M. F., Vanga-Bouanga, C., David, E. et Daigle, J. C..
2015.
« Further study on dielectric properties of solid epoxy composites with Graphene Oxide ».
In 2015 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Ann Arbor, MI, USA, Oct. 18-21, 2015)
pp. 539-542.
Piscataway, NJ, USA : IEEE.
Fréchette, M. F., Vanga-Bouanga, C., Veillette, R. et David, E..
2015.
« Hydrophobic performance of SiCO coating on polycarbonate assessed by a dielectric method ».
In 2015 IEEE 15th International Conference on Nanotechnology (IEEE-NANO) (Rome, Italy, 27-30 July 2015)
pp. 300-303.
Piscataway, NJ, USA : IEEE.
Fréchette, M. F., Vanga-Bouanga, C., Veillette, R. et David, E..
2015.
« Multifunctional polyethylene nanodielectrics containing platinum and nanosilica ».
In 15th IEEE International Conference on Nanotechnology (IEEE-NANO) (Rome, Italy, July 27-30, 2015)
pp. 1354-1357.
Institute of Electrical and Electronics Engineers Inc..
Ghezal, Faiza, Bouzidane, Ahmed, AboShighiba, Hicham et Thomas, Marc.
2015.
« Three-dimensional patterns in a hydrostatic bearing lubricated by ferrofluids ».
In 1st International Conference on Tribology (Turkeytrib'15) (Istanbul, Turkey, Oct. 7-9, 2015)
Guillon, L., Hallé, S. et Rousse, D. R..
2015.
« Étude comparative des performances thermiques de collecteurs solaires perforés opaque et transparent ».
In Comptes rendus du XIIème Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (Sherbrooke, QC, Canada, 8-10 juin 2015)
Günebak, Servet, Nadeau, Sylvie, Morency, François et Sträter, Oliver.
2015.
« Towards a safer and more efficient communication process for aircraft ground deicing: review of human factors and team communication literature ».
In 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference. Abstract book (Montreal, QC, Canada, May 19-21, 2015)
pp. 189-199.
Guo, Meng, Demarquette, Nicole R., David, Éric et Fréchette, Michel.
2015.
« Polyethylene-based composites containing octaisobutyl polyhedral oligomeric silsesquioxanes obtained by extrusion ».
In 2015 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Ann Arbor, MI, USA, Oct. 18-21, 2015)
pp. 527-530.
Piscataway, NJ, USA : IEEE.
Hallé, Stéphane, Fatisson, Julien, Nadeau, Sylvie et Vinches, Ludwig.
2015.
« Cooling technologies for reducing thermal constraints in deep under-ground mines : OHS challenges ».
In The Proceedings of the 19th Triennial Congress of the International Ergonomics Association. Melbourne, 9-14 August, 2015 (Melbourne, Australia, Aug. 9-14, 2015)
International Ergonomics Association.
Heid, Thomas, Fréchette, Michel et David, Éric.
2015.
« Dielectric and thermal properties of nanostructured epoxy composites involving reactive POSS and c-BN ».
In 2015 Electrical Insulation Conference (EIC) (Seattle, WA, USA, June 7-10, 2015)
pp. 205-208.
Piscataway, NJ, USA : IEEE.
Helal, E., Demarquette, N. R., David, E. et Fréchette, M. F..
2015.
« Polystyrene-b-poly (ethylene-co-butylene)-b-polystyrene/zinc oxide block copolymer nanocomposites: Rheological and dielectric properties ».
In 73rd Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Orlando 2015 (Orlando, FL, USA, Mar. 23-25, 2015)
pp. 2711-2716.
Society of Plastics Engineers.
Helal, Emna, Demarquette, Nicole R., David, Eric et Fréchette, Michel.
2015.
« Dielectric properties of thermoplastic elastomer/zinc oxide (ZnO) nanocomposites with controlled nanoparticles dispersion ».
In 2015 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Ann Arbor, MI, USA, Oct. 18-21, 2015)
pp. 447-450.
Piscataway, NJ, USA : IEEE.
Ibrahim, Hussein, Ould Rouis, Lofti, Masson, Christian et Rousse, Daniel.
2015.
« Optimisation par contrôle d’un système de dégivrage électrothermique d’une pale d’éolienne ».
In Comptes rendus du XIIème Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (Sherbrooke, QC, Canada, 8-10 juin 2015)
Imaouchen, Yacine, Alkama, Rezak et Thomas, Marc.
2015.
« Bearing fault detection using motor current signal analysis based on wavelet packet decomposition and Hilbert envelope ».
In 4th Colloque Experimental Vibration Analysis, AVE 2014, November 18, 2014 - November 20, 2014 (Blois, France, Nov. 18-20, 2014)
Coll. « MATEC Web of Conferences », vol. 20.
EDP Sciences.
Imaouchen, Yacine, Kedadouche, Mourad, Alkama, Rezak et Thomas, Marc.
2015.
« The envelope-derivative operator for bearing fault detection ».
In Surveillance 8 - International Conference (Roanne, France, Oct. 20-21, 2015)
Kaupp, Jake, Doré, Sylvie, Fostaty Youg, Sue, Frank, Brian, Ostafichuk, Pete, McCahan, Susan et Nesbit, Susan.
2015.
« The Canadian Engineering Education Association Research Collaboration (CEEA-RC): Annual Survey of Canadian Engineering Instructors ».
In Proceedings of the Canadian Engineering Education Association (CEEA) Conference- McMaster University May 31-June 3, 2015 (Hamilton, ON, Canada, May 31-June 3, 2015)
Canadian Engineering Education Association.
Kazeminia, Mehdi et Bouzid, Abdel-Hakim.
2015.
« On the modeling of gas flow through porous compression packings used in valve stuffing-boxes ».
In ICONE 2015 - 23rd International Conference on Nuclear Engineering: Nuclear Power - Reliable Global Energy (Makuhari, Chiba, Japan, May 17-21, 2015)
American Society of Mechanical Engineers (ASME).
Kazeminia, Mehdi et Bouzid, Abdel-Hakim.
2015.
« Prediction of leak rates in porous braided packing rings ».
In ASME 2015 Pressure Vessels and Piping Conference. (Boston, MA, USA, July 19-23, 2015)
Coll. « ASME Proceedings »
American Society of Mechanical Engineers.
Kedadouche, Mourad, Thomas, Marc, Tahan, Antoine et Guilbault, Raynald.
2015.
« Monitoring gears by vibration measurements: Lempel-Ziv complexity and approximate entropy as diagnostic tools ».
In 4th Colloque Experimental Vibration Analysis, AVE 2014, November 18, 2014 - November 20, 2014 (Blois, France, Nov. 18-20, 2014)
Coll. « MATEC Web of Conferences », vol. 20.
EDP Sciences.
Khay, M., Cardonne, M., Vachon, P-L., Dubé, M., Ngô, A. D. et Ganesan, R..
2015.
« Experimental investigation of the tensile-tensile fatigue behaviour of carbon/epoxy plain weave laminates ».
In Design, manufacturing and applications of composites : proceedings of the Tenth Joint Canada-Japan Workshop on Composites, the University of British Columbia, Vancouver, Canada, August 2014 (Vancouver, BC, Canada, Aug. 19-21, 2014)
pp. 36-44.
DEStech Publications, Inc..
Khosravi, G., Ahmadi, Golestan, Hallé, S. et Morency, F..
2015.
« Prediction of bioaerosols dispersion and spatial distribution in a hospital isolation room ».
In 23rd Annual Conference of the Computational Fluid Dynamics Society of Canada (CFDSC) (Waterloo, ON, Canada, June 7-10, 2015)
Khou, J. C., Ghedhaifi, W., Vancassel, X., Montreuil, E. et Garnier, F..
2015.
« Influence of fuel sulfur content on contrail formation in the near-field of a commercial aircraft ».
In Proceedings of the 4th Conference on Transport, Atmosphere and Climate (TAC-4) (Bad Kohlgrub, Germany, June 22-25, 2015)
pp. 97-102.
Deutsches Zentrum für Luft- und Raumfahrt.
Laghzale, N., Bouzid, A. et Elgharad, A..
2015.
« L’effet de l’interférence sur un assemblage fretté dans le domaine plastique ».
In 22ème Congrès Français de Mécanique (Lyon, France, 24-28 août 2015)
Coll. « M06 - Colloque Euro Méditerranée »
Association Française de Mécanique.
Le Bourlés, Marie, Sadoulet-Reboul, Emeline, Ouisse, Morvan, Doutres, Olivier, Verdière, Kévin et Panneton, Raymond.
2015.
« Investigations of an impedance tube technique to determine the transmission loss of materials under angular incidence ».
In Euronoise 2015, the 10th European Congress and Exposition on Noise Control Engineering (Maastrich, The Netherlands, May 31-June 3, 2015)
pp. 1821-1826.
Lescure, Eric, Nadeau, Sylvie et Morency, François.
2015.
« PME et SST : Quand la résilience est un modèle d’affaires ».
In 50ème congrès de la Société d'Ergonomie de Langue Française (Paris, France, 23-25 sept. 2015)
SELF.
Lessard, Larry, Asgarinia, Soroush, Viriyasuthee, Chanvit, Phillips, Steven, Dubé, Martine, Baets, Joris, Van Vuure, Aart et Verpoest, Ignaas.
2015.
« Fatigue behaviour of woven flax/epoxy composites ».
In 20th International Conference on Composite Materials (ICCM20) (Copenhagen, Denmark, July 19-24, 2015)
MSI Scandinavia.
Li, Wenchao, Vu, Viet-Hung, Liu, Zhaoheng, Thomas, Marc et Hazel, Bruce.
2015.
« Automatic structural mode extraction for time-varying structures via vector time-dependent autoregressive model ».
In International Conference Surveillance 8 (Roanne, France, Oct. 20-21, 2015)
Loucif, Abdelhalim, Fredj, Emna Ben, Jahazi, Mohammad, Lapierreboire, Louis-Philippe, Tremblay, Rami et Beauvais, Raymond.
2015.
« Analysis of macrosegregation in large size forged ingot of high strength steel ».
In Proceedings of the 6th International Congress on the Science and Technology of Steelmaking (ICS 2015) (Beijing, China, May 12-14, 2015)
pp. 1043-1046.
Chinese Society for Metals.
McMeekn, Kevin, Sirois, Frédéric, Bocher, Philippe et Tousignant, Maxime.
2015.
« Equivalent permeability model to simplify the nonlinear hysteretic B-H curve in time harmonic FEM simulations of induction heating ».
In 20th International Conference on the Computation of Electromagnetic Fields (Compumag 2015) (Montréal, QC, Canada, June 28-July 2, 2015)
pp. 333-334.
International Compumag Society.
Mebarki, Fouzia et David, Éric.
2015.
« Corona discharges aging of recycled PET filled with inorganic reinforcements ».
In IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP 2015) (Ann Arbor, MI, USA, Oct. 18-21, 2015)
pp. 796-799.
Institute of Electrical and Electronics Engineers Inc..
Merouchi, A., David, E., Baudoin, F., Mary, D. et Fofana, I..
2015.
« Optimization of the electrical properties of epoxy-SiC composites for stress-grading application ».
In 2015 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Ann Arbor, MI, USA, Oct. 18-21, 2015)
pp. 713-716.
Piscataway, NJ, USA : IEEE.
Mirakhorli, Fatemeh, Cao, Xinjin, Pham, Xuan Tan, Wanjara, Priti et Fihey, Jean-Luc.
2015.
« Hybrid laser-arc welding of cast martensitic stainless steel CA6NM: Post-weld tempered microstructure and mechanical properties ».
In Conference of metallurgists (COM 2015) (Toronto, ON, Canada, Aug. 23-26, 2015)
Mohammed Taifour, A. et Weiss, Julien.
2015.
« Écoulement moyen dans une bulle de décollement turbulente ».
In Proceedings of the Canadian Society for Mechanical Engineering International Congress and the 22nd Annual Conference of the CFD Society of Canada, CSME/CFDSC 2014 (Toronto, ON, Canada, June 1-4, 2014)
Moradi, Niloofar, Vlasic, Edward et Moustapha, Hany.
2015.
« Rapid airfoil design for uncooled high pressure turbine blades ».
In ASME Turbo Expo 2015: Turbine Technical Conference and Exposition (Montreal, QC, Canada, June 15-19, 2015)
American Society of Mechanical Engineers (ASME).
Moret, Maxime, Moustapha, Hany, Garnier, François et Abenhaim, Acher-Igal.
2015.
« Automatic thermal and stress preliminary analyses applied to a turbine rotor ».
In 62nd CASI Aeronautics Conference and AGM 3rd GARDN (Montreal, QC, Canada, May 19-21, 2015)
CASI.
Mroue, Hassan et Dao, Thien My.
2015.
« A new part routing-based decisional algorithm for urgent fabrication through a cost-time model in a flexible manufacturing system ».
In Proceedings of the International Conference on Operations Excellence and Service Engineering (Orlando, FL, USA, Sept. 9-11, 2015)
pp. 58-63.
IOM Society.
Muller, Y. A., Masson, Christian et Aubrun, S..
2015.
« Turbulent large-scale structure effects on wake meandering ».
In Wake Conference 2015 (Visby, Sweden, June 9-11, 2015)
Coll. « Journal of Physics: Conference Series », vol. 625.
UK : IOP Publishing.
Mullier, Guillaume et Chatelain, Jean-François.
2015.
« Influence of thermal damage on the mechanical strength of trimmed CFRP ».
In 17th International Conference on Materials Science, Metal and Manufacturing (ICMSMM 2015) (Barcelona, Spain, Aug. 17-18, 2015)
Nadeau, S., Morency, François et Nsangou, Jacques Robert.
2015.
« The contextualisation of lean manufacturing in the mining sector: forseeable challenges to occupational health and safety ».
In The Proceedings of the 19th Triennial Congress of the International Ergonomics Association. Melbourne, 9-14 August, 2015 (Melbourne, Australia, Aug. 9-14, 2015)
International Ergonomics Association.
Nadon, Vincent, Bockstael, Annelies, Botteldooren, Dick et Voix, Jérémie.
2015.
« Assessment of otoacoustic emission probe fit at the workfloor using integrated calibration procedure ».
In Euronoise 2015 (Maastrich, The Netherlands, May 31-June 3, 2015)
pp. 1955-1960.
Nanesa, Hadi Ghasemi, Jahazi, Mohammad et Levasseur, Tom.
2015.
« On the martensitic transformation of AISI D2 tool steel through cryogenic cooling ».
In International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (PTM 2015) (Whistler, BC, Canada, June 28-July 3, 2015)
pp. 641-642.
International Conference on Solid-Solid Phase Transformations in Inorganic Materials.
Nanesa, Hadi Ghasemi, Jahazi, Mohammad et Levasseur, Tom.
2015.
« Transmission electron microscopy study of micro-structure evolution in cryotreated AISI D2 tool steel ».
In International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015 (PTM 2015) (Whistler, BC, Canada, June 28-July 3, 2015)
pp. 735-736.
International Conference on Solid-Solid Phase Transformations in Inorganic Materials.
Nathan, Jörn, Masson, Christian, Dufresne, Louis et Churchfield, Matthew.
2015.
« Analysis of the sweeped actuator line method ».
In 2nd Symposium on OpenFOAM in Wind Energy (SOWE2014) (Boulder, CO, USA, May 19-21, 2014)
Coll. « E3S Web of Conferences », vol. 5.
EDP Sciences.
Nélisse, Hugues, Le Cocq, Cécile, Boutin, Jérôme, Voix, Jérémie et Laville, Frédéric.
2015.
« Systematic evaluation of the relationship between subjective and objective measurement methods of hearing protector devices attenuation ».
In Euronoise 2015, the 10th European Congress and Exposition on Noise Control Engineering (Maastrich, The Netherlands, May 31-June 3, 2015)
pp. 1973-1978.
Nemchi, Amina, Bouzidane, Ahmed, Thomas, Marc, Abed, Asma et Kedadouche, Mourad.
2015.
« Influence of turbulent flow regime on dynamic behaviour of a rigid rotor on four-pad hydrostatic squeeze film dampers loaded between pads ».
In 1st International Conference on Tribology (Turkeytrib'15) (Istanbul, Turkey, Oct. 7-9, 2015)
Ngan, Nguyen Hoa et Beauregard, Yvan.
2015.
« Analysis of the stress in thread fastener by finite elements to predict the contact damage ».
In 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference (Montreal, QC, Canada, May 19-21, 2015)
Canadian Aeronautics and Space Institute.
Nguyen, Hong-Den, Deshaies, Martin et Pham, Xuan-Tan.
2015.
« Simulation-assisted mold design for forming of thermoplastic PPS/ carbon fiber composites ».
In 62nd CASI Aeronautics Conference (Montreal, QC, Canada, May 18-21, 2015)
Nguyen, T. H. D. et Dao, T. M..
2015.
« Novel approach to optimize milk-run delivery: a case study ».
In IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Singapore, Singapore, Dec. 6-9, 2015)
pp. 351-355.
IEEE Computer Society.
Nguyen, T. H., Gerboud, A. et Garnier, F..
2015.
« 3D- Modelling and simulation of thermodynamic process and aerosol precursors transformations in high-pressure turbine (HPT) of an aircraft engine with different operating conditions ».
In Proceedings from the 22nd International Symposium on Air Breathing Engines (ISABE) (Phoenix, AZ, USA, Oct. 25-30, 2015)
Nguyen-Tri, Phuong, Triki, Ennouri, Gauvin, Chantal, Tuduri, Ludovic et Vu-Khanh, Toan.
2015.
« A study of the resistance of protective materials to metalworking fluids ».
In 17th International Conference on Applied Chemistry (ICAC 2015) (Paris, France, Sept. 21-22, 2015)
Ostiguy, P-C., Sherafat, M. H., Franca, D. R., Bouslama, N., Quaegebeur, N., Maslouhi, A., Lessard, L., Hubert, P., Viens, M., Mofakhami, M. R., Hajjar, Z. et Masson, P..
2015.
« Selection of structural features for the systematic study of guided wave propagation and interaction with damage ».
In Structural health monitoring 2015 : System Reliability for Verification and Implementation (Stanfort, CA, USA, Sept. 1-3, 2015)
pp. 1973-1980.
Destech Publications.
Padois, T., Doutres, O., Berry, A. et Sgard, F..
2015.
« Comparison of acoustic source localization methods in time domain using sparsity constraints ».
In INTER-NOISE and NOISE-CON Congress and Conference Proceedings, InterNoise15 (San Francisco, CA, USA, Aug. 9-12, 2015)
pp. 2053-2062.
INCE-USA.
Paradis, P. L., Hallé, S. et Rousse, D. R..
2015.
« Modèle thermique d'un collecteur solaire à tube sous vide pour la production d'air chaud ».
In Comptes rendus du XIIème Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (Sherbrooke, QC, Canada, 8-10 juin 2015)
Paradis, P. L., Rousse, D. R. et Hallé, S..
2015.
« A one dimensional thermal model for evacuated tubes-based solar collectors ».
In Proceedings of the 3rd Southern African Solar Energy Conference (SASEC) (Skukuza Rest Camp, South Africa, May 11-13, 2015)
Pereira, Daniel, Abid, Alexandre, Diotaveli, Lucien, Fernandes, Julio et Belanger, Pierre.
2015.
« Axial transmission assessment of trabecular bone at distal radius using guided waves ».
In 170th Meeting of the Acoustical Society of America (Jacksonville, FL, USA, Nov. 2-6, 2015)
Petit, Yvan, Boisclair, Dominic, Parent, Stefan et Mac-Thiong, Jean-Marc.
2015.
« Simulation of high energy vertebral fractures on complete porcine specimens ».
In 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (Milan, Italy, Aug. 25-29, 2015)
pp. 3901-3904.
Piscataway, NJ, USA : IEEE.
Preda, I., Figueroa, J., Nöel, S., Soulieres, B. et David, E..
2015.
« Thermal modeling of a stator bar-influence of geometry and material properties ».
In 2015 Electrical Insulation Conference (EIC) (Seattle, WA, USA, June 7-10, 2015)
pp. 166-171.
Piscataway, NJ, USA : IEEE.
Quevedo, F., Vanderesse, N., Bocher, P. et Nuño, N..
2015.
« Characterization and simulation of manufacturing irregularities of additive manufactured well-ordered porous materials ».
In Advanced Manufacturing Canada (AMC 2015) (Montreal, QC, Canada, Nov. 18-19, 2015)
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, J.E. et Balazinksi, M..
2015.
« A new approach for surface profile roughness characterization in the laminated composite ply plane ».
In 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference (Montreal, QC, Canada, May 19-21, 2015)
Canadian Aeronautics and Space Institute.
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, J.E. et Balazinski, M..
2015.
« Surface condition of high speed trimming of CFRP ».
In 6th International Conference on science and technology of composite materials (COMAT) (Buenos Aires, Argentina, May 7-8, 2015)
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, Jolanta E. et Balazinksi, Marek.
2015.
« Surface quality assessment of CFRP high speed trimming using fractal analyses of the cutting force signals ».
In 4th international conference on virtual machining process technology (VMPT 2015) (Vancouver, BC, Canada, June 2-5, 2015)
Rimpault, Xavier, Chatelain, Jean-François, Klemberg-Sapieha, Jolanta E. et Balazinksi, Marek.
2015.
« Tool wear impact on surface roughness condition of CFRP high speed trimming ».
In 4th international conference on virtual machining process technology (VMPT 2015) (Vancouver, BC, Canada, June 2-5, 2015)
Robin, Olivier, Amedin, Celsa Kafui, Berry, Alain, Atalla, Noureddine, Doutres, Olivier et Sgard, Franck.
2015.
« Assessing sound absorption coefficient under a synthetized diffuse acoustic field: effect of the sample size and nature ».
In INTER-NOISE and NOISE-CON Congress and Conference Proceedings, InterNoise15 (San Francisco, CA, USA, Aug. 9-12, 2015)
pp. 4173-4183.
INCE-USA.
Roth, Simon-Nicolas, Soulaimani, Azzeddine et Léger, Pierre.
2015.
« Combined XFEM-continuous damage mechanics approach for three dimensional concrete crack propagation ».
In CFRAC 2015 IV International Conference on Computational Modeling fo Fracture and Failure of Materials and Structures (Cachan, France, June 3-5, 2015)
Rousse, D. R., Quesada, G., Guillon, L., Paradis, P. L., Merhtash, M. et Dutil, Y..
2015.
« A theoretical criterion to determine the appropriate tracking strategy for PV solar systems ».
In Proceedings of the 28th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2015 (Pau, France, June 29‐July 3, 2015)
Saboori, M., Gholipour, J., Champliaud, H., Gakwaya, A., Wanjara, P. et Savoie, J..
2015.
« Prediction of burst pressure in multi stage tube hydroforming of aerospace alloys ».
In ASME Turbo Expo 2015: Turbine Technical Conference and Exposition (GT 2015) (Montreal, QC, Canada, June 15-19, 2015)
American Society of Mechanical Engineers (ASME).
Salazar, Oliverio Velázquez, Weiss, Julien et Morency, François.
2015.
« Development of blended wing body aircraft design ».
In CASI 62nd Aeronautics Conference and AGM 3rd GARDN Conference (Montreal, QC, Canada, May 19-21, 2015)
CASI.
Santos, Thomas, Liu, Zhaoheng et Hazel, Bruce.
2015.
« Study and validation testing of the dynamics of a robotic system with flexible links and joints ».
In 2015 IEEE International Conference on Mechatronics and Automation (ICMA) (Beijing, China, Aug. 2-5, 2015)
pp. 1891-1897.
IEEE.
Sattarpanah Karganroudi, Sasan, Cuillière, Jean-Christophe, Francois, Vincent et Tahan, Souheil-Antoine.
2015.
« An improvement of fixtureless inspection for non-rigid parts based on filtering sample points ».
In 25th Canadian Congress of Applied Mechanics (London, ON, Canada, May 31 - June 4, 2015)
Séguillon, Camille et Arteau, Jean.
2015.
« The passive-active concepts as selection criteria for rebar installers' fall arrest systems (PPE) ».
In Frühjahrskongress 2015 der Gesellschaft für Arbeitswissenschaft GfA (Karlsruhe, Germany, Feb. 25-27, 2015)
Dortmund : GfA-Press.
Semenou, T., Le Lostec, B., Nouanègue, H. F. et Rousse, D. R..
2015.
« Étude comparative du couplage de collecteurs solaires avec une thermopompe ».
In Comptes rendus du XIIème Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes (Sherbrooke, QC, Canada, 8-10 juin 2015)
Shahriari, D., Loucif, Abdelhalim, Jahazi, Mohammad, Tremblay, R. et Beauvais, R..
2015.
« 3D numerical simulation of solidification of large size ingots of high strength steels ».
In 6th International Conference on Modelling and Simulation of Metallurgical Processes in Steelmaking (STEELSIM2015) (Bardolino, Italy, Sept. 23-25, 2015)
Sheremetyev, Vadim, Prokoshkin, Sergey, Dubinskiy, Sergey, Brailovski, Vladimir et Inaekyan, Karine.
2015.
« Fatigue properties of metastable beta Ti-22Nb-6Zr (at%) alloy for load-bearing biomedical applications ».
In International Conference on Shape Memory and Superelastic Technologies, SMST 2015 (Oxfordshire, UK, May 18-22, 2015)
pp. 169-170.
Enstone Chipping Norton, Oxfordshire, United Kingdom : ASM International.
Simoneau, C., Terriault, P. et Brailovski, V..
2015.
« Modeling and additive manufacturing of open-cell random-porosity structures for biomedical applications ».
In International Conference on Porous Metals and Metallic Foams Technology (METFOAM 2015) (Barcelona, Spain, Aug. 31-Sept. 2, 2015)
Slamani, Mohamed et Chatelain, Jean-François.
2015.
« Issues and challenges in robotic trimming of CFRP ».
In ICINCO 2015 - 12th International Conference on Informatics in Control, Automation and Robotics, Proceedings (Colmar, Alsace, France, July 21-23, 2015)
pp. 400-405.
SciTePress.
Songmene, Victor et Njoya Doko, R..
2015.
« Fine metallic particle emission when milling aluminium alloys and aluminium metal matrix composites ».
In 7th Light Metals Technology Conference (LMT2015) (Port Elizabeth, South Africa, July 27-29, 2015)
Coll. « Materials Science Forum », vol. 828-829.
pp. 381-388.
Switzerland : Trans Tech Publications.
Stanescu, Magdalena, Kajl, Stanislaw et Lamarche, Louis.
2015.
« Optimisation de conception des systèmes CVCA d’un bâtiment réel : analyse énérgétique et économique ».
In XII Colloque interuniversitaire franco-québécois (CIFQ 2015) (Sherbrooke, QC, Canada, 8-10 juin 2015)
Steele, Daniel, Dumoulin, Romain, Voreux, Louis, Gautier, Nicolas, Glaus, Mathias, Guastavino, Catherine et Voix, Jérémie.
2015.
« Musikiosk: a soundscape intervention and evaluation in an urban park ».
In 59th International Conference: Sound Reinforcement Engineering and Technology (July 2015) (Montréal, QC, Canada, July 15-17, 2015)
Audio Engineering Society.
Terriault, P. et Brailovski, V..
2015.
« Influence of boundary conditions on the simulation of architectured porous structures ».
In International Conference on Porous Metals and Metallic Foams Technology (METFOAM 2015) (Barcelone, Spain, Aug. 31-Sept. 2, 2015)
Tetrault, Pascal, Plamondon, Etienne, Breuze, Matthieu, Hespel, Camille, Mounaïm-Rousselle, Christine et Seers, Patrice.
2015.
« Fuel spray tip penetration model for double injection strategy ».
In SAE 2015 World Congress & Exhibition (Detroit, MI, USA, Apr. 21-23, 2015)
Coll. « SAE Technical Papers », vol. 2015-01-0934.
Society of Automotive Engineers.
Thakare, Dhawal R., Belanger, Pierre et Rajagopal, Prabhu.
2015.
« Effect of dimensional degradation on ultrasonic guided waves in bone system ».
In ICU International Congress on Ultrasonics (ICU) (Metz, France, May 11-14, 2015)
Coll. « Physics Procedia », vol. 70.
pp. 1131-1134.
Elsevier.
Thakare, Dhawal R., Rajagopal, Prabhu et Belanger, Pierre.
2015.
« Ultrasonic guided waves in bone system with degradation ».
In 170th Meeting of the Acoustical Society of America (Jacksonville, FL, USA, Nov. 2-6, 2015)
Coll. « Proceedings of Meetings on Acoustics », vol. 25.
Acoustical Society of America.
Thomas, Marc.
2015.
« Bearing monitoring : from modelling to feature selection for fault diagnosis ».
In Surveillance 8 - International Conference (Roanne, France, Oct. 20-21, 2015)
Thomas, Marc.
2015.
« Développement d’indicateurs de défauts de roulements : de la modélisation à l’expérimentation ».
In ICM/CIM 2015 (Montréal, QC, Canada, 9-13 mai 2015)
Toledano, Alvaro, Broughton, Cabot, Morency, François et Weiss, Julien.
2015.
« Improvement of subsonic wall corrections in an industrial wind tunnel ».
In CASI 62nd Aeronautics Conference and AGM 3rd GARDN Conference (Montreal, QC, Canada, May 19-21, 2015)
CASI.
Tongne, Amèvi, Desrayaud, Christophe, Jahazi, Mohammad et Feulvarch, Eric.
2015.
« Analytical modeling of material flow in friction stir welding ».
In 11th International Seminar on Numerical Analysis of Weldability (Graz, Austria, Sept. 27-30, 2015)
Trünkle, J., Mohammed-Taifour, A. et Weiss, J..
2015.
« Fluctuating pressure measurements in a turbulent separating and reattaching flow ».
In Proceedings of the 50th edition of the 3AF International Conference on Applied Aerodynamics: Forthcoming Challenges for Aerodynamics. Toulouse, France – March 30, 31, April 1, 2015 (Toulouse, France, Mar. 30-Apr. 1, 2015)
Vanga-Bouanga, C., Fréchette, M. F. et David, E..
2015.
« Dielectric response and thermal conductivity of nanostructured microcomposites: High density polyethylene filled with a mixture of ZnO and HCl doped polyaniline ».
In 2015 Electrical Insulation Conference (EIC) (Seattle, WA, USA, June 7-10, 2015)
Coll. « ) »
pp. 496-500.
Piscataway, NJ, USA : IEEE.
Vanga-Bouanga, C., Heid, T. F., Fréchette, M. F. et David, E..
2015.
« Influence of interface on the dielectric response, electrical and thermal conductivity of high density polyethylene based composites ».
In 2015 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Ann Arbor, MI, USA, Oct. 18-21, 2015)
pp. 709-712.
Piscataway, NJ, USA : IEEE.
Vanga-Bouanga, C., Savoie, S., Fréchette, M. F. et David, E..
2015.
« Synthesis and characterization of Ultra High Molecular Weight Polyethylene filled with boron nitride micro and nano-particles ».
In 2015 Electrical Insulation Conference (EIC) (Seattle, WA, USA, June 7-10, 2015)
pp. 234-237.
Piscataway, NJ, USA : IEEE.
Vinches, L., Hallé, S. et Nadeau, S..
2015.
« Amélioration du confort thermique en mines profondes ».
In Conférence mensuelles en sécurité du travail et contrôle des risques industriels, ÉREST, ÉTS, AQHSST (Montréal, QC, Canada, 12 mars 2015)
Vinches, L., Peyrot, C., Lemarchand, L., Boutrigue, N., Zemzem, M., Wilkinson, K. J., Hallé, Stéphane et Tufenkji, N..
2015.
« Towards understanding the mechanisms and the kinetics of nanoparticle penetration through protective gloves ».
In 4th International Conference on Safe Production and Use of Nanomaterials (Nanosafe2014), 18-20 Nov. 2014 (Grenoble, France, Nov. 18-20, 2014)
Coll. « Journal of Physics: Conference Series », vol. 617.
UK : IOP Publishing.
Vinches, L., Zemzem, M., Hallé, S., Peyrot, C., Wilkinson, K. et Tufenkji, N..
2015.
« Effectiveness of protective gloves against engineered nanoparticules ».
In Proceedings of World Congress on New Technologies (NewTech'15) (Barcelona, Spain, July 15-17, 2015)
Vinches, L., Zemzem, M., Hallé, S., Wilkinson, K. J. et Tufenkji, N..
2015.
« Penetration of engineered nanoparticles through nitrile rubber gloves ».
In SENN 2015, International Congress on Safety of Engineering Nanoparticles and Nanotechnologies, 12-15 April 2015. Marina Congress Center, Helsinki, Finland. Programme and Abstracts (Helsinki, Finland, Apr. 12-15, 2015)
Voix, Jérémie, Lezzoum, Narimene et Gagnon, Ghyslain.
2015.
« Evaluation of digital earplug featuring a multi-band adaptive gain control noise reduction algorithm for enhanced audibility in noisy environments ».
In Proceedings of the 22nd International Congress on Sound and Vibration : Major challenges in Acoustics, Noise and Vibration Research (Florence, Italy, July 12-16, 2015)
pp. 3308-3314.
International Institute of Acoustics and Vibration.
Vu, Viet Hung, Liu, Zhaoheng, Thomas, Marc, Tahvilian, Amir Masoud et Hazel, Bruce.
2015.
« Dynamic forces identification and modeling of a robotic grinding process ».
In Surveillance 8 - International Conference (Roanne, France, Oct. 20-12, 2015)
Vu, Viet-Hung, Thomas, Marc, Liu, Zhaoheng et Hazel, Bruce.
2015.
« Spectrum construction for non statiotionary vibration: application for a working robot ».
In 4th Colloque Experimental Vibration Analysis, AVE 2014, November 18, 2014 - November 20, 2014 (Blois, France, Nov. 18-20, 2014)
Coll. « MATEC Web of Conferences », vol. 20.
EDP Sciences.
Weiss, Julien, Mohammed Taifour, Abdouahab et Schwaab, Quentin.
2015.
« Unsteady behavior of a pressure-induced turbulent separation bubble ».
In 53rd AIAA Aerospace Sciences Meeting (Kissemmee, FL, USA, Jan. 5-9, 2015)
Coll. « AIAA Paper »
American Institute of Aeronautics and Astronautics.
Xu, Zhiqiang, Chen, George, Guo, Meng, David, Éric et Fréchette, Michel.
2015.
« Space charge properties of UHMWPE/OibPOSS composites ».
In 2015 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Ann Arbor, MI, USA, Oct. 18-21, 2015)
pp. 543-546.
Piscataway, NJ, USA : IEEE.
Zazoum, Bouchaib, Fréchette, Michel et David, Eric.
2015.
« Effect of POSS as compatibilizing agent on structure and dielectric response of LDPE/TiO2 nanocomposites ».
In 2015 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Ann Arbor, MI, USA, Oct. 18-21, 2015)
pp. 523-526.
Piscataway, NJ, USA : IEEE.
Zhukova, Yulia, Pustov, Yury, Sheremetyev, Vadim, Konopatsky, Anton, Filonov, Mikhail et Brailovski, Vladimir.
2015.
« Electrochemical characterization of oxidized nanostructured superelastic Ti-Nb-Zr alloy for medical implants ».
In ESOMAT 2015 – 10th European Symposium on Martensitic Transformations (Antwerp, Belgium, Sept. 14-18, 2015)
Coll. « MATEC Web of Conferences », vol. 33.
EDP Sciences. Livre
Nadeau, Sylvie et Petit, Yvan et Hallé, Stéphane et Morency, François et Dufresne, Louis, éds.
2015.
« Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics ».
2nd edition.
Newcastle upon Tyne, UK : Cambridge Scholars Publishing. 180 p. Chapitre de livre
Bernier, G., Petit, Y., Marchand, F., Terriault, P. et Nadeau, S..
2015.
« Chapter 9: Case study : Toy design ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 79-86. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Bouzid, H., Kenné, J. P., Nadeau, S. et Gowings, T..
2015.
« Chapter 2: Case study : Designing a log splitter ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 7-13. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Bouzid, H., Nadeau, S. et Kenné, J. P..
2015.
« Chapter 1: Case study : Gasket test rig ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 1-6. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Bouzid, H., Nadeau, S., Kenné, J. P. et Giner-Morency, C..
2015.
« Chapter 4: Case study : Designing a hydraulic car lift for small auto repair shops ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 26-36. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Bouzid, H., Nadeau, S., Kenné, J. P., Gowings, T. et Giner-Morency, C..
2015.
« Chapter 5: Case study : Designing a boom lift ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 37-55. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Hallé, S. et Morency, F..
2015.
« Chapter 8: Case study: Downtown Toronto open loop geothermal cooling system - part II ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 72-78. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Kenné, J. P., Bouzid, H., Nadeau, S. et Giner-Morency, C..
2015.
« Chapter 14: Case study : Designing a lift truck ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 122-128. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Kenné, J. P., Bouzid, H., Nadeau, S. et Giner-Morency, C..
2015.
« Chapter 6: Case study : Designing an aerial work platform vehicle ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 54-63. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Kenné, J. P., Nadeau, S., Bouzid, H. et Giner-Morency, C..
2015.
« Chapter 12: Case study: automated overhead crane ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 105-113. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Morency, F. et Hallé, S..
2015.
« Chapter 7: Case study: Downtown Toronto open loop geothermal cooling system - part I ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 64-71. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Nadeau, S., Arteau, J. et Giner-Morency, C..
2015.
« Chapter 11: Case study : Hybrid vehicle ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 98-104. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Nadeau, S., Ateme-Nguema, B. H., Benedetti, C. et Vachon, C..
2015.
« Chapter 15: Case study: J. L. Vachon: Industry leader and pioneer ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 129-141. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Nadeau, S., Bouzid, H., Kenné, J. P. et Giner-Morency, C..
2015.
« Chapter 13: Designing an airplane baggage belt loader ».
In
Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics.
2nd edition.
pp. 114-121. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.
Prokoshkin, Sergey, Brailovski, Vladimir, Inaekyan, Karine, Korotitskiy, Andrey et Kreitcberg, Alena.
2015.
« Thermomechanical treatment of TiNi intermetallic-based shape memory alloys ».
In
Shape Memory Alloys: Properties, Technologies, Opportunities.
Coll. « Foundations of Materials Science and Engineering », vol. 81-82.
pp. 342-405. Pfäffikon, Switzerland : Trans Tech Publications.
Slamani, M. et Chatelain, J. F..
2015.
« High-speed robotic trimming of CFRP ».
In
Machinability of Fibre-Reinforced Plastics.
Coll. « Advanced Composites », vol. 4.
pp. 83-101. De Gruyter. Article de revue ou de magazine, non révisé par les pairs
Delecroix, Thomas, Velazquez, Oliverio, Weiss, Julien et Morency, François.
2015.
« L’avion à fuselage intégré a-t-il de l’avenir? ».
Substance ÉTS.
Jetté, Bruno, Fréchette, Guillaume, Guillemette, Olivier, Gaudreau, Robin, Simoneau, Charles, Terriault, Patrick et Brailovski, Vladimir.
19 août 2015.
« Comment prolonger la durée de vie des prothèses de la hanche? ».
[Article de recherche]. Substance ÉTS.
Jetté, Bruno, Fréchette, Guillaume, Guillemette, Olivier, Gaudreau, Robin, Simoneau, Charles, Terriault, Patrick et Brailovski, Vladimir.
19 août 2015.
« Increasing Hip Prostheses’ Lifespan ».
[Article de recherche]. Substance ÉTS.
Kurusu, Rafael S. et Demarquette, Nicole R..
9 avril 2015.
« Can we control the “Wetting Behavior” of Polymer Fibers made by Electrospinning? ».
[Article de recherche]. Substance ÉTS.
Kurusu, Rafael S. et Demarquette, Nicole R..
9 avril 2015.
« Peut-on réguler l’hydrophilie des fibres de polymère fabriquées par électrofilage? ».
[Article de recherche]. Substance ÉTS.
Lescure, E., Nadeau, S. et Morency, F..
2015.
« Ingénierie et résilience: dégivrage d'avions ».
Travail et Santé, vol. 31, nº 2.
p. 48.
Leurs, Romain, Morency, François et Nadeau, Sylvie.
2015.
« Détection de proximité avion-nacelle pour les opérations de dégivrage ».
Substance ÉTS.
Nadeau, Sylvie.
2015.
« Efficacité et efficience, un équilibre à atteindre ».
Travail et Santé, vol. 31, nº 5.
p. 8.
Torres, Yaniel, Morency, François et Nadeau, Sylvie.
2015.
« Fatigue et dégivrage d’avions au sol ».
Travail et Santé, vol. 31, nº 4.
pp. 9-11.
Zinsalo, Joël M. et Lamarche, Louis.
21 octobre 2015.
« Deep Geothermal Energy: A Potential not Fully Exploited ».
[Article de recherche]. Substance ÉTS.
Zinsalo, Joël M. et Lamarche, Louis.
21 octobre 2015.
« La géothermie profonde : un potentiel peu exploré ».
[Article de recherche]. Substance ÉTS.
AfficheAlturkistani, Husain, Bertrand-Grenier, Antony, Salloum, Eli, Cloutier, Guy, Lerouge, Sophie et Soulez, Gilles. 2015. « Quasi static ultrasound elastography characterization of thrombus maturation in the aneurysmal sac after embolization of endoleaks with chitosan gels ». Affiche numéro VI224-SD-MOB2 présentée lors de la conférence : Radiological Society of North America 2015 Scientific Assembly and Annual Meeting (Chicago, IL, USA, Nov. 29-Dec. 4, 2015). Arteau, J.. 2015. « Mechanical and ergonomic criteria in PPE standard: a case study, the CSA Z259.2.1-1998 Fall arresters ». Affiche présentée lors de la conférence : 5th European Conference on standardization, testing and certification in the field of occupational safety and health (Seville, Spain, Oct. 14-16, 2015). Arteau, J.. 2015. « Standards incorporated by reference in the legislation – the Canadian context ». Affiche présentée lors de la conférence : 5th European Conference on standardization, testing and certification in the field of occupational safety and health (Seville, Spain, Oct. 14-16, 2015). Arteau, J., Desjardins-David, I., Boudreault, B. et Côté, K.. 2015. « An evaluation methodology of PPE as a tool to ease the use of EN13921-2007 Personal protective equipment – Ergonomic principles ». Affiche présentée lors de la conférence : 5th European Conference on standardization, testing and certification in the field of occupational safety and health (Seville, Spain, Oct. 14-16, 2015). Assaad, E., Maire, M. et Lerouge, S.. 2015. « Injectable thermosensitive chitosan hydrogels with enhanced properties ». Affiche présentée lors de la conférence : Society for Biomaterials 2015 Annual Meeting & Eposition: Driving Biomaterial Innovation and the Race to Translation (Charlotte, NC, USA, Apr. 15-18, 2015). Belhadj, T., Songmene, V. et Jahazi, M.. 2015. « Influence des paramètres de procédé sur la distorsion de grandes plaques d'aluminium formées par thermoformage : phase d'éjection ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (Chicoutimi, QC, Canada, 11 nov. 2015). Ben Salah, M., Tuduri, L. et Hallé, S.. 2015. « Efficiency evaluation of disposable coverall against nanoparticles in conditions simulating occupational use ». Affiche présentée lors de la conférence : SENN 2015, International Congress on Safety of Engineering Nanoparticles and Nanotechnologies (Helsinki, Finland, Apr. 12-15, 2015). Bertrand-Grenier, A., Zehtabi, F., Cloutier, G., Héon, H., Lerouge, S. et Soulez, G.. 2015. « Endoleak and thrombus characterization with dynamic elastography after endoleak embolization following aneurysm endovascular repair ». Affiche présentée lors de la conférence : SPIE Medical Imaging 2015 (Orlando, FL, USA, Feb. 21-26, 2015). Bertrand-Grenier, A., Zehtabi, F., Kauffman, C., Cloutier, G., Lerouge, S. et Soulez, G.. 2015. « Endoleak and thrombus characterization with dynamic elastography after endoleak embolization following aneurysm endovascular repair ». Affiche présentée lors de la conférence : 32nd Annual Meeting of the Canadian Biomaterials Society (CBS 2015) (Toronto, ON, Canada, May 27-30, 2015). Bertrand-Grenier, A., Zehtabi, F., Kauffman, C., Héon, H., Cloutier, G., Lerouge, S. et Soulez, G.. 2015. « Caractérisation de thrombus et d’endofuite avec l’élastographie dynamique après embolisation d’endofuite suivant la réparation endovasculaire d’anévrisme ». Affiche présentée lors de la conférence : Journées Françaises de Radiologie Diagnostique et Interventionnelle 2015 (Paris, France, 16-19 oct. 2015). Bertrand-Grenier, Antony, Zehtabi, Fatemeh, Héon, Helene, Cloutier, Guy, Lerouge, Sophie et Soulez, Gilles. 2015. « Endoleak and thrombus characterization with dynamic elastography after endoleak embolization following aneurysm endovascular repair ». Affiche numéro SSQ22-02 présentée lors de la conférence : Radiological Society of North America 2015 Scientific Assembly and Annual Meeting (Chicago, IL, USA, Nov. 29-Dec. 4, 2015). Ceccaldi, C., Monette, A., Assaad, Elias, Lapointe, Réjean et Lerouge, Sophie. 2015. « A hydrogel for local T lymphocyte delivery towards enhanced cancer immunotherapies ». Affiche présentée lors de la conférence : Society for Biomaterials 2015 Annual Meeting & Eposition: Driving Biomaterial Innovation and the Race to Translation (Charlotte, NC, USA, Apr. 15-18, 2015). Cliche, F., Petit, Y. et Mac-Thiong, J. M.. 2015. « Effect of compression time related to anterior vs posterior spinal cord contusion ». Affiche numéro S1P106 présentée lors de la conférence : 4th ISCoS and ASIA Joint Scientific Meeting (Montreal, QC, Canada, May 14-16, 2015). Desire, E., Nadeau, S. et Boudreau-Trudel, B.. 2015. « Design of control panels for underground mining equipment: Why open innovation should be promoted as a sustainable approach to development ». Affiche numéro 349 présentée lors de la conférence : 19th Triennial Congress of the International Ergonomics Association (Melbourne, Australia, Aug. 9-14, 2015). Garnier, François, Ghedhaifi, Weeded, Vancassel, Xavier, Khou, Jean-Charles et Montreuil, Emmanuel. 2015. « 3D-CFD Investigation of contrails and volatile aerosols produced in the near-field of an aircraft wake ». Affiche numéro 78197 présentée lors de la conférence : AGU Fall Meeting (San Francisco, CA, USA, Dec. 14-18, 2015). Ibrahim, H., Rousse, D. R., Ilinca, A., Ramdenee, D. et Chandra, A.. 2015. « Modeling and analysis of energy flow in a hybrid wind-diesel compressed air energy storage system ». Affiche présentée lors de la conférence : 28th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2015 (Pau, France, June 29‐July 3, 2015). Imen zaabar, H. C., Mougel, Léo, Sablin, Niamkey, Grichi, Yosra, Beauregard, Yvan, Dao, T. M. et Paquet, M.. 2015. « Dynamic forecasting of avionics obsolescence to enhance sustainability ». Affiche présentée lors de la conférence : Sustainability 2015 : An International Conference on Environmental Sustainability in Air Vehicle Design and Operations of Helicopters and Airplanes (AHS 2015) (Montreal, QC, Canada, Sept. 22-24, 2015). Kuester, Scheyla, Barra, Guilherme M. O. et Demarquette, Nicole R.. 2015. « Hybrid nanocomposites based on poly (styrene-b-(ethylene-co-butylene)-b-styrene)/carbon nanotubes/graphene for electromagnetic shielding ». Affiche présentée lors de la conférence : Graphene & 2D materials international conference and exhibition (Montreal, QC, Canada, Oct. 14-16, 2015). Marchand, G., Cloutier, Y., Lavoie, J., Veillette, M., Duchaine, C. et Hallé, S.. 2015. « Evaluation of bioarerosol exposures during hospital bronchoscopy examinations ». Affiche présentée lors de la conférence : 115th General Meeting of the American Society for Microbiology (ASM2015) (New Orleans, LA, USA, May 30-June2, 2015). Monette, A., Ceccaldi, C., Lerouge, S. et Lapointe, R.. 2015. « Chitosan thermogels for local T lymphocyte delivery for cancer immunotherapy ». Affiche présentée lors de la conférence : 7th General Annual Meeting of Quebec Cell and Tissue Therapy Network FRQS (ThéCell) (Quebec City, QC, Canada, Nov. 27, 2015). Monette, A., Ceccaldi, C., Lerouge, S. et Lapointe, R.. 2015. « Chitosan thermogels for local T lymphocyte delivery for cancer immunotherapy ». Affiche présentée lors de la conférence : 8th Annual Canadian Cancer Immunotherapy Consortium (CCIC) Symposium 2015 (Vancouver, BC, Canada, May 20-22, 2015). Monette, A., Ceccaldi, C., Lerouge, S. et Lapointe, R.. 2015. « Chitosan thermogels for local T lymphocyte delivery for cancer immunotherapy ». Affiche présentée lors de la conférence : Society for immunotherapy of cancer (SITC) 30th Anniversary Annual Meeting & Associated Programs (Montreal, QC, Canada, Nov. 4-8, 2015). Monette, A., Ceccaldi, C., Lerouge, S. et Lapointe, R.. 2015. « Injectable thermogels for local delivery and expansion of T lymphocytes towards enhanced cancer immunotherapies ». Affiche présentée lors de la conférence : 2nd Montreal Immunology Meetings (MIM) annual symposium immune-stromal cell interactions (Montreal, QC, Canada, Nov. 23, 2015). Nisol, B., Archambault-Caron, M., Gagnon, H., Lerouge, S. et Wertheimer, M. R.. 2015. « Precise energy and temperature measurements in Dielectric Barrier Discharges (DBD) at atmospheric pressure ». Affiche présentée lors de la conférence : AVS 62nd International Symposium & Exhibition 2015 (San Jose, CA, USA, Oct. 18-23, 2015). Sattarpanah Karganroudi, Sasan, Cuillière, Jean-Christophe, Francois, Vincent et Tahan, Souheil-Antoine. 2015. « Inspection automatique de pièces flexibles sans gabarit de conformité ». Affiche présentée lors de la conférence : 22e édition du Concours d’affiches scientifiques de l'Université du Québec à Trois-Rivières (UQTR) (Trois-Rivières, QC, Canada, 25-26 mars 2015). Simoneau, C., Terriault, P. et Brailovski, V.. 2015. « Modeling and additive manufacturing of open-cell random-porosity structures for biomedical applications ». Affiche numéro P-34 présentée lors de la conférence : International Conference on Porous Metals and Metallic foams Technology (METFOAM 2015) (Barcelona, Spain, Aug. 31-Sept. 2, 2015). Terriault, P. et Brailovski, V.. 2015. « Influence of boundary conditions on the simulation of architectured porous structures ». Affiche numéro P-101 présentée lors de la conférence : International Conference on Porous Metals and Metallic foams Technology (METFOAM 2015) (Barcelone, Spain, Aug. 31-Sept. 2, 2015). Vaur, Romain, Côté, Nicolas, Dubé, Martine, Dano, Marie-Laure et Potvin, Marie-Josée. 2015. « Repair of thermoplastic composite structures using induction welding ». Affiche présentée lors de la conférence : Colloque du Centre de Recherche sur les Systèmes Polymères et Composites à haute performance (CREPEC) (Montréal, QC, Canada, 5 juin 2015). Voix, Jérémie. 2015. « Did you say "bionic" ear ? ». Affiche présentée lors de la conférence : 10th anniversary symposium of the International laboratory for Brain, Music and Sound Research : The Next Ten Years (Montreal, QC, Canada, Oct. 21-23, 2015). Zehtabi, F., Fatimi, Ahmed, Bertrand-Grenier, Antony, Soulez, Gilles et Lerouge, Sophie. 2015. « In vitro and in vivo evaluation of chitosan-sotradecol hydrogel, an embolizing sclerosing agent for the treatment of endoleaks ». Affiche présentée lors de la conférence : Society for Biomaterials 2015 Annual Meeting & Eposition: Driving Biomaterial Innovation and the Race to Translation (Charlotte, NC, USA, Apr. 15-18, 2015). CommunicationAblitt, Wayne, Mayer, Zachary, Morrison, Douglas, Nadeau, Sylvie et Treasurywala, Adi. 2015. « Challenges associated with transferring new technologies to the mining industry ». Communication lors de la conférence : CEMI-UDMN panel, Canadian Science Policy Centre (Ottawa, ON, CA, Nov. 26, 2015). Arteau, Jean. 2015. « Les normes dans la réglementation en SST : aspects légaux, pratiques et démocratiques ». Communication lors de la conférence : Conférence scientifique de l'ÉREST (Montréal, QC, Canada, 10 déc. 2015). Arteau, Jean. 2015. « L’impact des recherches menées sur la protection contre les chutes de hauteur - Évolution de la protection contre les chutes au Québec 1980-2015 ». Communication lors de la conférence : Colloque IRSST 2015 : L'impact des recherches: mesures, approches et application au domaine de la SST. Institut de recherche Robert-Sauvé en santé et en sécurité du travail (Montréal, QC, Canada, 20 nov. 2015). Beauregard, Yvan. 2015. « Surprises and cost overrun: A lean risk management approach to reduce surprises and address cost overruns in aerospace product development projects ». Communication lors de la conférence : International Annual Conference of the American Society for Engineering Management 2015 (ASEM 2015) (Indianapolis, IN, USA, Oct. 7-10, 2015). Bertrand-Grenier, A., Zehtabi, F., Kauffman, C., Héon, H., Cloutier, G., Lerouge, S. et Soulez, G.. 2015. « Caractérisation de thrombus et d’endofuite avec l’élastographie dynamique après embolisation d’endofuite suivant la réparation endovasculaire d’anévrisme ». Communication lors de la conférence : Journées Françaises de Radiologie Diagnostique et Interventionnelle 2015 (Paris, France, 16-19 oct. 2015). Bertrand-Grenier, A., Zehtabi, F., Kauffman, C., Héon, H., Cloutier, G., Lerouge, S. et Soulez, G.. 2015. « Endoleak and thrombus characterization with dynamic elastography after endoleak embolization following aneurysm endovascular repair ». Communication lors de la conférence : World Congress on Medical Physics and Biomedical Engineering (Toronto, ON, Canada, June 7-12, 2015). Bouserhal, Rachel E., Falk, Tiago H. et Voix, Jérémie. 2015. « Modeling speech production in noise to code vocal effort for use with communication headsets ». Communication lors de la conférence : NHCA Annual Hearing Conference 2015 (New Orleans, LA, USA, Feb. 19-22, 2015). Bouserhal, Rachel E. et Voix, Jérémie. 2015. « Modeling speech production in noise to code the vocal effort for use with communication headsets ». Communication lors de la conférence : 10th anniversary symposium of the International laboratory for Brain, Music and Sound Research : The Next Ten Years (Montreal, QC, Canada, Oct. 21-23 2015). Braun, C., Stieglitz, T., Voix, J. et Waldmann, B.. 2015. « Animation of workshop on technology and system integration as part of the symposium on closing the efferent loop (CA2015) initiative ». Communication lors de la conférence : Closing the Auditory (Efferent) Loop International Symposium (VIANNA) (Hannover, Germany, Oct. 26-28, 2015). Brummund, M., Brailovski, V., Petit, Y., Facchinello, Y. et Mac-Thiong, J. M.. 2015. « Influence of spinal instrumentation stiffness on the mobility of porcine lumbar spine ». Communication lors de la conférence : 13th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (Montreal, QC, Canada, Sept. 01-05, 2015). Buvat, G., Beauregard, Y. et Doré, S.. 2015. « Process modeling and simulation ». Communication lors de la conférence : 2nd Canadian Aeronautics and Space Institute (CASI) Aerospace Manufacturing Technologies Symposium (Montreal, QC, Canada, May 19-21, 2015). Carleton, Eric et Zednik, Ricardo. 2015. « Surface and cross-sectional comparison of the nanostructure of electroless and electroplated Ni and Au deposits ». Communication lors de la conférence : 5th International Seminar of Nanoscience and Nanotechnology (Havana, Cuba, Sept. 14-18, 2015). Ceccaldi, C., Assaad, E., Bonneton, L. et Lerouge, S.. 2015. « Strong injectable thermosensitive scaffolds for cell therapy ». Communication lors de la conférence : Society for Biomaterials 2015 Annual Meeting & Eposition: Driving Biomaterial Innovation and the Race to Translation (Charlotte, NC, USA, Apr. 15-18, 2015). Ceccaldi, C., Monette, A., Assaad, E., Lapointe, R. et Lerouge, S.. 2015. « Chitosan thermogels for local T lymphocyte delivery in cancer immunotherapy ». Communication lors de la conférence : 32nd Annual Meeting Of The Canadian Biomaterials Society (CBS 2015) (Toronto, ON, Canada, May 27-30, 2015). Ceccaldi, C., Zehtabi, F., Degueunon-Noudomin, A., Assaad, E., Bonneton, L. et Lerouge, S.. 2015. « Design of injectable hydrogels for blood vessel embolization and cell therapy ». Communication lors de la conférence : 32nd Annual Meeting of the Canadian Biomaterials Society (CBS 2015) (Toronto, ON, Canada, May 27-30, 2015). Chouchene, Wejden, Hallé, Stéphane, Bahloul, Ali, Alberto Castro, Ruiz Carlos et Debia, Maximilien. 2015. « Estimation des expositions professionnelles à des vapeurs de solvants: comparaison entre les logiciels Industrial Hygiene Modeling (IHMOD) et Fire Dynamics Simulator (FDS) ». Communication lors de la conférence : 37e Congrès de l’AQHSST (Saint-Sauveur, QC, Canada, 20-22 mai 2015). Cloutier, Y., Lavoie, J., Hallé, S. et Marchand, G.. 2015. « Comportement aérosolaire des particules et bioaérosols ». Communication lors de la conférence : Présentation à de membres de l'Ordre des dentistes du Québec (Montréal, QC, Canada, 27 mars 2015). Coulombe, H., Lachapelle, G., Hallé, S. et Debia, M.. 2015. « Caractérisation des émanations de moteurs diesel dans les mines souterraines ». Communication lors de la conférence : Présentation devant les chercheurs de l'IRSST (Montréal, QC, Canada, 10 déc. 2015). Facchinello, Y., Brailovski, V., Petit, Y., Brummund, M. et Mac-Thiong, J. M.. 2015. « Tiges monolithiques aux propriétés variables pour la stabilisation de la colonne vertébrale : étude biomécanique ». Communication lors de la conférence : 45e Réunion Annuelle de la Société de Scoliose du Québec (St-Sauveur, QC, Canada, 15-17 oct. 2015). Fareh, F., Demers, V., Turenne, S. et Scalzo, O.. 2015. « Segregation measurement of Inconel 718 feedstocks used in low-pressure metal injection molding ». Communication lors de la conférence : International Conference on Advanced materials engineering & technology (ICAMET 2015) (Kaohsiung, Taiwan, Dec. 4-6, 2015). Hagen, J., Petit, Y. et Wagnac, E.. 2015. « Finite element modelling of spinal ligaments with strain rate dependent properties ». Communication lors de la conférence : 13th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (Montreal, QC, Canada, Sept. 1-5, 2015). Kuester, Scheyla, Barra, Guilherme Mariz de Oliveira et Demarquette Nicole, R.. 2015. « Electrically conductive polymer nanocomposites based on poly(styrene-b-(ethylene-co-butylene)-b-styrene) and carbon nanoadditives for electromagnetic shielding ». Communication lors de la conférence : Europa and Africa Regional Meeting of Polymer Processing Society (PPS 2015) (Graz, Austria, Sept. 25-29, 2015). Kurusu Salles, Rafael et Demarquette Nicole, R.. 2015. « Effect of materials and processing parameters on the morphology and wetting behavior of SEBS electrospun mats ». Communication lors de la conférence : Europa and Africa Regional Meeting of Polymer Processing Society (PPS 2015) (Graz, Austria, Sept. 25-29, 2015). Lavoie, Jacques et Hallé, Stéphane. 2015. « L'évaluation des expositions aux bioaérosols lors des opérations de bronchoscopie en milieu hospitalier et les moyens de maîtrise ». Communication lors de la conférence : Webinaire de l'Association Paritaire pour la Santé et la Sécurité du Travail du Secteur Affaires Sociales (ASSTSAS), 5 Oct. 2015). Monette, A., Ceccaldi, C., Lerouge, S. et Lapointe, R.. 2015. « Thermogels injectables pour l'administration et la prolifération localisée de lymphocytes T dans le but d'améliorer les immunothérapies du cancer ». Communication lors de la conférence : 25e Journée scientifique de l'Institut du Cancer (ICM) de Montréal (Montreal, QC, Canada, Nov. 13, 2015). Mullier, Guillaume et Chatelain, Jean-François. 2015. « Influence of thermal damage on the mechanical strength of trimmed CFRP ». Communication lors de la conférence : 17th International Conference on Materials Science, Metal and Manufacturing (ICMSMM 2015) (Barcelona, Spain, Aug. 17-18, 2015). Nadeau, S.. 2015. « Initiation à la gestion intégrée des risques ». Communication lors de la conférence : 37e Congrès AQHSST (Saint-Sauveur, QC, Canada, 20-22 mai 2015). Nadeau, S. et Hallé, S.. 2015. « Integrating OHS in mechanical engineering curriculum: a decade of innovation at ÉTS ». Communication lors de la conférence : Minerva Learning Forum (Montreal, QC, Canada, June 9, 2015). Nadeau, S., Morency, F. et Nsangou, J-R.. 2015. « Le lean mining et les défis associés à la SST ». Communication lors de la conférence : Colloque régional 2015 en santé et sécurité minière. Association paritaire pour la santé et la sécurité du travail secteur minier (Rouyn-Noranda, QC, Canada, 18 mars 2015). Nadeau, Sylvie et Hallé, Stéphane. 2015. « Mines ultra-profondes : quand la chaleur et l’humidité deviennent intenables ». Communication lors de la conférence : Expo Hightex 2015 (Boucherville, QC, Canada, 25-26 mars 2015). Ngô, Anh Dung. 2015. « Concurrent engineering for rapid product development workshop ». Communication lors de la conférence : Séminaire à l'Institut Polytechnique de Hô-Chi-Minh-Ville (Ho Chi Minh City, Vietnam, May 4-5, 2015). Ngô, Anh Dung. 2015. « Concurrent engineering for rapid product development workshop ». Communication lors de la conférence : Séminaire à l'École Polytechnique de Danang (Danang, Vietnam, May 7-8, 2015). Ngô, Anh Dung. 2015. « DFMA/Concurrent engineering for rapid product development ». Communication lors de la conférence : National conference on machines and mechanisms (Ho Chi Minh City, Vietnam, Oct. 31, 2015). Ngô, Anh Dung. 2015. « Effects on humidity and temperature on static and fatigue properties of hemp fibre and biocomposite ». Communication lors de la conférence : 6th International Conference on Mechanical and Aerospace Engineering (ICMAE) (Roma, Italy, July 16-18, 2015). Petit, Y., Cloutier, L. et Laflamme, G. Y.. 2015. « Antero-lateral locking plate improves greater trochanteric fracture fixation ». Communication lors de la conférence : 21st Congress of the European Society of Biomechanics (Prague, Czech Republic, July 05-08, 2015). Slamani, Mohamed et Chatelain, Jean-François. 2015. « Issues and challenges in robotic trimming of CFRP ». Communication lors de la conférence : ICINCO 2015 - 12th International Conference on Informatics in Control, Automation and Robotics (Colmar, Alsace, France, July 21-23, 2015). Thomas, Marc. 2015. « Développement d’indicateurs de défauts de roulements : de la modélisation à l’expérimentation ». Communication lors de la conférence : Séminaire au LMA-CRNS (Marseille, France, 10 nov. 2015). Vinches, L. et Hallé, S.. 2015. « Amélioration du confort thermique en mines profondes ». Communication lors de la conférence : Conférence midi ÉREST (Montréal, QC, Canada, 12 mars 2015). Voix, Jérémie. 2015. « Did you really say "bionic" ear ? ». Communication lors de la conférence : 10th anniversary symposium of the International laboratory for Brain, Music and Sound Research : The Next Ten Years (Montreal, QC, Canada, Oct. 21-23, 2015). Voix, Jérémie, Lezzoum, Narimene et Gagnon, Ghislain. 2015. « Evaluation of a digital earplug featuring a multi-band adaptive gain control noise reduction algorithm for enhanced audibility in noisy environments ». Communication lors de la conférence : The 22nd International Congress on Sound and Vibration (ICSV22) (Florence, Italy, July 12-16, 2015). Zednik, Ricardo J.. 2015. « High temperature piezoelectrics for ultrasound structural health monitoring ». Communication lors de la conférence : Instituto Peruano de Energia Nuclear (Lima, Peru, 2015). Rapport technique
Corriveau, Guillaume, Guilbault, Raynald, Tahan, Antoine et Sabourin, R..
2015.
« Evaluation of genotypic diversity measurements exploited in real-coded representation ».
arXiv. 13 p.
Lavoie, Jacques, Marchand, Geneviève, Cloutier, Yves, Beaudet, Yves, Hallé, Stéphane, Nadeau, Sylvie, Pichette, Gilbert et Duchaine, Caroline.
2015.
« Bronchoscopie en milieu hospitalier : Évaluation des expositions aux bioaérosols ».
Coll. « Études et recherches », vol. R-879.
IRSST.
Songmene, Victor, Khettabi, Riad, Viens, Martin, Kouam, Jules, Hallé, Stéphane, Morency, François, Masounave, Jacques et Djebara, Abdelhakim.
2015.
« Nanoparticle measurement, control and characterization: procedure applied to machining and mechanical friction ».
Coll. « Studies and Research Projects », vol. R-864.
IRSST. 82 p. BrevetCarrier, Mathieu, Dansereau, Mathieu, Fernandes, Julio, Mérette, Jean-Sébastien, Petit, Yvan et Songmene, Victor (inventeurs) 12 mai 2015. « Alésoir acétabulaire ». Valorisation recherche hôpital Sacré-Coeur de Montréal, École de technologie supérieure (titulaire(s)). Brevet canadien CA 2696990. [Titre traduit: Acetabular reamer with locking collar]. Voix, Jérémie et Laville, Frédéric (inventeurs) 20 octobre 2015. « Method and apparatus for objective assessment of in-ear device acoustical performance ». Company, 3M Innovative Properties (titulaire(s)). Brevet américain US 9,167,365. Voix, Jérémie, Maloney, Michael et Turcot, Michael C. (inventeurs) 18 septembre 2015. « Settable compound delivery device and system for inflatable in-ear device ». Sonomax Technologies Inc. (titulaire(s)). Brevet américain US 9,107,772. Voix, Jérémie, Turcot, Michael C., Braun, Katrin , Boa, Steve et Yane, Lawrence (inventeurs) 22 décembre 2015. « Head-mounted device for settable compound delivery system for inflatable in-ear device ». Sonomax Technologies Inc. (titulaire(s)). Brevet américain US 9,216,114. |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau