| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
L'affiliation est "Génie mécanique"Nombre de documents archivés : 252. Article publié dans une revue, révisé par les pairs
Abdedou, Azzedine, Soulaïmani, Azzeddine et Tchamen, Georges Williams.
2020.
« Uncertainty propagation of dam break flow using the stochastic non-intrusive B-splines Bezier elements-based method ».
Journal of Hydrology, vol. 590.
Ahmed, M. Zaid, Chadha, K., Reddy, S. R., Shahriari, D., Bhattacharjee, P. P. et Jahazi, M..
2020.
« Influence of process parameters on microstructure evolution during hot deformation of a Eutectic High-Entropy Alloy (EHEA) ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 51, nº 12.
pp. 6406-6420.
Aidibe, Ali, Tahan, Souheil Antoine et Nejad, Mojtaba Kamali.
2020.
« Interlaboratory empirical reproducibility study based on a GD&T benchmark ».
Applied Sciences, vol. 10, nº 14.
Ajaja, J., Jomaa, W., Bocher, P., Chromik, R. R. et Brochu, M..
2020.
« High cycle fatigue behavior of hard turned 300 M ultra-high strength steel ».
International Journal of Fatigue, vol. 131.
Al Aela, Ahmed Mohamed, Kenné, Jean-Pierre et Mintsa, Honorine Angue.
2020.
« A novel adaptive and nonlinear electrohydraulic active suspension control system with zero dynamic tire liftoff ».
Machines, vol. 8, nº 3.
Aleyari, Alireza, Majidi, Omid, Bombardier, Nicolas, Pham, Xuan-Tan et Jahazi, Mohammad.
2020.
« Finite element and experimental analysis of the preheating stage of High Speed Blow Forming (HSBF) process ».
Journal of Manufacturing Processes, vol. 49.
pp. 10-17.
Ali, Ghalya, Demers, Vincent, Côté, Raphaël et Demarquette, Nicole R..
2020.
« Threshold concentration of surfactant agent in feedstocks used for low-pressure powder injection molding ».
Materials Performance and Characterization, vol. 9, nº 4.
Alinejad, Yasaman, Bitar, Christina M. E., Martinez Villegas, Karina, Perignon, Sarah, Hoesli, Corinne A. et Lerouge, Sophie.
2020.
« Chitosan microbeads produced by one-step scalable stirred emulsification: A promising process for cell therapy applications ».
ACS Biomaterials Science & Engineering, vol. 6, nº 1.
pp. 288-297.
Anagonou, Augias, Godjo, Thierry, Songmene, Victor et Tankpinou, Yvette.
2020.
« Étude des propriétés physico-mécaniques d’un béton hydraulique contenant des cendres de coques d’anacarde de tailles micrométriques et nanométriques substituant partiellement le ciment ».
Déchets Sciences et Techniques, nº 83.
pp. 39-48.
Anagonou, Augias, Songmene, Victor, Godjo, Thierry et Kouam, Jules.
2020.
« Recycling of West african cashew nut shells waste in asphalt concrete: Impact on the physico-mechanical properties of asphalt concrete ».
International Journal of Advanced Research and Publications, vol. 4, nº 2.
pp. 96-106.
Armentia, Mikel, Abasolo, Mikel, Coria, Ibai et Bouzid, Abdel-Hakim.
2020.
« On the use of a simplified slip limit equation to predict screw self-loosening of dental implants subjected to external cycling loading ».
Applied Sciences, vol. 10, nº 19.
Aweimer, Ali Salah Omar, Bouzid, Abdel-Hakim et Zhao, Zijian.
2020.
« Leakage estimate in nonuniformly compressed packing rings ».
Journal of Nuclear Engineering and Radiation Science, vol. 6, nº 2.
Azizi, Sohrab, Momen, Gelareh, Ouellet-Plamondon, Claudiane et David, Eric.
2020.
« Enhancement in electrical and thermal performance of high-temperature vulcanized silicone rubber composites for outdoor insulating applications ».
Journal of Applied Polymer Science, vol. 137, nº 46.
Azizi, Sohrab, Momen, Gelareh, Ouellet-Plamondon, Claudiane et David, Eric.
2020.
« Performance improvement of EPDM and EPDM/Silicone rubber composites using modified fumed silica, titanium dioxide and graphene additives ».
Polymer Testing, vol. 84.
Babanezhad, Kaveh, Aidibe, Ali, Foucault, Gilles, Tahan, Antoine et Bigeon, Jean.
2020.
« Improved Bi-Criterion flexible registration for fixtureless inspection of compliant parts ».
Precision Engineering, vol. 65.
pp. 116-129.
Bag, Amrita, Delbergue, Dorian, Ajaja, Jihane, Bocher, Philippe, Lévesque, Martin et Brochu, Myriam.
2020.
« Effect of different shot peening conditions on the fatigue life of 300M steel submitted to high stress amplitudes ».
International Journal of Fatigue, vol. 130.
Bailly, Nicolas, Diotalevi, Lucien, Beausejour, Marie-Helene, Wagnac, Eric, Mac-Thiong, Jean-Marc et Petit, Yvan.
2020.
« Numerical investigation of the relative effect of disc bulging and ligamentum flavum hypertrophy on the mechanism of central cord syndrome ».
Clinical Biomechanics, vol. 74.
pp. 58-65.
Bailly, Nicolas, Petit, Yvan, Desrosier, Jean-Michel, Laperriere, Olivier, Langlois, Simon et Wagnac, Eric.
2020.
« Strain rate dependent behavior of vinyl nitrile helmet foam in compression and combined compression and shear ».
Applied Sciences, vol. 10, nº 22.
Beauséjour, Marie-Hélène, Petit, Yvan, Hagen, Jeremy, Arnoux, Pierre-Jean, Thiong, Jean-Marc Mac et Wagnac, Eric.
2020.
« Contribution of injured posterior ligamentous complex and intervertebral disc on post-traumatic instability at the cervical spine ».
Computer Methods in Biomechanics and Biomedical Engineering, vol. 23, nº 12.
pp. 832-843.
Bédard, Frédéric, Jahazi, Mohammad et Songmene, Victor.
2020.
« Die-sinking EDM of Al6061-T6: interactions between process parameters, process performance, and surface characteristics ».
International Journal of Advanced Manufacturing Technology, vol. 107, nº 1-2.
pp. 333-342.
Ben Mosbah, Abdallah, Botez, Ruxandra Mihaela, Medini, Soumaya et Dao, Thien-My.
2020.
« Artificial neural networks-extended great deluge model to predict actuators displacements for a morphing wing tip system ».
INCAS Bulletin, vol. 12, nº 4.
pp. 13-24.
Ben Trad, Mohamed Aziz, Demers, Vincent, Côté, Raphaël, Sardarian, Mehran et Dufresne, Louis.
2020.
« Numerical simulation and experimental investigation of mold filling and segregation in low-pressure powder injection molding of metallic feedstock ».
Advanced Powder Technology, vol. 31, nº 3.
pp. 1349-1358.
Benrachi, Naoufel, Ouzzane, Mohamed, Smaili, Arezki, Lamarche, Louis, Badache, Messaoud et Maref, Wahid.
2020.
« Numerical parametric study of a new earth-air heat exchanger configuration designed for hot and arid climates ».
International Journal of Green Energy, vol. 17, nº 2.
pp. 115-126.
Berdai, Mounia, Tahan, Antoine et Gagnon, Martin.
2020.
« Reproducibility investigation of elicitation techniques in risk assessment for hydraulic turbines ».
Journal of Risk Research, vol. 23, nº 3.
pp. 297-312.
Billerot, Pierre-Lou, Dufresne, Louis, Lemaire, Romain et Seers, Patrice.
2020.
« 3D CFD analysis of a diamond lattice-based porous burner ».
Energy, vol. 207.
Bleichner, Martin G., Kidmose, Preben et Voix, Jérémie.
2020.
« Editorial: Ear-centered sensing: From sensing principles to research and clinical devices ».
[Éditorial]. Frontiers in Neuroscience, vol. 13.
Boivin, Guillaume, Bélanger, Pierre et Zednik, Ricardo J..
2020.
« Characterization of pure face-shear strain in piezoelectric alpha-tellurium dioxide (alpha-TeO2) ».
Crystals, vol. 10, nº 10.
Bonnet, Fabien, Nélisse, Hugues, Nogarolli, Marcos A.C. et Voix, Jérémie.
2020.
« Individual in-situ calibration of in-ear noise dosimeters ».
Applied Acoustics, vol. 157.
Bouchard-Roy, Jacob, Delnavaz, Aidin et Voix, Jérémie.
2020.
« In-ear energy harvesting: Evaluation of the power capability of the temporomandibular joint ».
IEEE Sensors Journal, vol. 20, nº 12.
pp. 6338-6345.
Bouchard-Roy, Jacob, Delnavaz, Aidin et Voix, Jérémie.
2020.
« Mobile in-ear power sensor for jaw joint activity ».
Micromachines, vol. 11, nº 12.
Bouissa, Y., Bohlooli, N., Shahriari, D., Champliaud, H., Morin, J. B. et Jahazi, M..
2020.
« FEM modeling and experimental validation of quench-induced distortions of large size steel forgings ».
Journal of Manufacturing Processes, vol. 58.
pp. 592-605.
Brailovski, Vladimir, Kalinicheva, Victoria, Letenneur, Morgan, Lukashevich, Konstantin, Sheremetyev, Vadim et Prokoshkin, Sergey.
2020.
« Control of density and grain structure of a laser powder bed-fused superelastic Ti-18Zr-14Nb alloy: Simulation-driven process mapping ».
Metals, vol. 10, nº 12.
Bretin, R., Levesque, M., Pilvin, P. et Bocher, P..
2020.
« Neighborhood effect within polycrystalline materials: Elastoplastic micromechanical analysis by cellular automaton and finite element ».
International Journal of Fatigue, vol. 137.
Brika, Salah Eddine et Brailovski, Vladimir.
2020.
« Influence of Powder Particle Morphology on the Static and Fatigue Properties of Laser Powder Bed-Fused Ti-6Al-4V Components ».
Journal of Manufacturing and Materials Processing, vol. 4, nº 4.
Brika, Salah Eddine, Letenneur, Morgan, Dion, Christopher Alex et Brailovski, Vladimir.
2020.
« Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy ».
Additive Manufacturing, vol. 31.
Brooke, Daniel C., Umnova, Olga, Leclaire, Philippe et Dupont, Thomas.
2020.
« Acoustic metamaterial for low frequency sound absorption in linear and nonlinear regimes ».
Journal of Sound and Vibration, vol. 485.
Brulatout, Jonathan, Garnier, François et Seers, Patrice.
2020.
« Interaction between a diesel-fuel spray and entrained air with single- and double-injection strategies using large eddy simulations ».
Propulsion and Power Research, vol. 9, nº 1.
pp. 37-50.
Carillo, Kévin, Doutres, Olivier et Sgard, Franck.
2020.
« A finite element model to study the earplug contribution to the objective occlusion effect ».
[Résumé d'une communication à une conférence]. Journal of the Acoustical Society of America, vol. 148, nº 4.
p. 2781.
Carillo, Kévin, Doutres, Olivier et Sgard, Franck.
2020.
« Theoretical investigation of the low frequency fundamental mechanism of the objective occlusion effect induced by bone-conducted stimulation ».
Journal of the Acoustical Society of America, vol. 147, nº 5.
pp. 3476-3489.
Carneiro, Thiago Bruno, Rodrigues, Samuel Filgueiras, Aranas, Clodualdo, Siciliano, Fulvio, Silva, Eden Santos, Reis, Gedeon Silva, Miranda, Edson Jansen Pedrosa, Leal, Valdemar Silva, Jahazi, Mohammad et Jonas, John Joseph.
2020.
« Retransformation of dynamically induced ferrite during physical simulation of Steckel mill hot rolling ».
Journal of Materials Research and Technology, vol. 9, nº 5.
pp. 10254-10264.
Carvalho, Vinícius L., Safieddine, Camila, Demarquette, Nicole R. et Pinheiro, Luís A..
2020.
« In situ compatibilization of a polyethylene, polypropylene, and polystyrene ternary blend through Friedel-Crafts alkylation ».
Journal of Applied Polymer Science, vol. 137, nº 3.
Chadha, K., Aranas, C., Shahriari, D., Jahazi, M. et Spray, J. G..
2020.
« The effect of retained work hardening on the driving force for dynamic transformation ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 51, nº 11.
pp. 5617-5622.
Chadha, Kanwal, Tian, Yuan, Bocher, Philippe, Spray, John G. et Aranas, Clodualdo.
2020.
« Microstructure evolution, mechanical properties and deformation behavior of an additively manufactured maraging steel ».
Materials, vol. 13, nº 10.
Chaghazardi, Zahra, Hof, Lucas et Wuthrich, Rolf.
2020.
« Electropolishing of inside surfaces of stainless steel tubing ».
ECS Transactions, vol. 97, nº 7.
pp. 523-536.
Chaieb, Oussama, Olufayo, Oluwole A., Songmene, Victor et Jahazi, Mohammad.
2020.
« Investigation on surface quality of a rapidly solidified Al–50%Si alloy component for deep-space applications ».
Materials, vol. 13, nº 15.
Chamanfar, A., Chentouf, S. M., Jahazi, M. et Lapierre-Boire, L. P..
2020.
« Austenite grain growth and hot deformation behavior in a medium carbon low alloy steel ».
Journal of Materials Research and Technology, vol. 9, nº 6.
pp. 12102-12114.
Champagne, Olivier et Pham, Xuan-Tan.
2020.
« Numerical simulation of moving heat source in arc welding using the Element-free Galerkin method with experimental validation and numerical study ».
International Journal of Heat and Mass Transfer, vol. 154.
Charfi, Mohamed Ali, Mathieu, Ronan, Chatelain, Jean-François, Ouellet-Plamondon, Claudiane et Lebrun, Gilbert.
2020.
« Effect of graphene additive on flexural and interlaminar shear strength properties of carbon fiber-reinforced polymer composite ».
Journal of Composites Science, vol. 4, nº 4.
Chatenet, Quentin, Gagnon, Martin, Remy, Emmanuel, Fouladirad, Mitra et Tahan, Antoine.
2020.
« Stochastic modeling of cavitation erosion in francis runner ».
International Journal of Fluid Machinery and Systems, vol. 13, nº 1.
pp. 21-29.
Chegini, M., Aboutalebi, M. R., Seyedein, S. H., Ebrahimi, G. R. et Jahazi, M..
2020.
« Study on hot deformation behavior of AISI 414 martensitic stainless steel using 3D processing map ».
Journal of Manufacturing Processes, vol. 56.
pp. 916-927.
Comlan Fannou, Jean-Louis, Doko, Kouandété Valéry, Prodjinonto, Vincent, Lamarche, Louis, Kajl, Stanislaw, Degan, Gérard et Sanya, Emile A..
2020.
« Modeling of a condenser in dynamic operation using comsol multiphysics software ».
Physical Science International Journal, vol. 24, nº 8.
pp. 11-28.
Constant, Caroline, Nichols, Sylvain, Wagnac, Éric, Petit, Yvan, Desrochers, André et Braïlovski, Vladimir.
2020.
« Biocompatibility and mechanical stability of Nitinol as biomaterial for intra-articular prosthetic devices ».
Materialia, vol. 9.
Coulombe, Frédéric, Rousse, Daniel R. et Paradis, Pierre-Luc.
2020.
« CFD simulations to improve air distribution inside cold climate broiler houses involving heat exchangers ».
Biosystems Engineering, vol. 198.
pp. 105-118.
Dagdeviren, Omur E., Acikgoz, Ogulcan, Grutter, Peter et Baykara, Mehmet Z..
2020.
« Direct imaging, three-dimensional interaction spectroscopy, and friction anisotropy of atomic-scale ripples on MoS2 ».
npj 2D Materials and Applications, vol. 4, nº 1.
Dagdeviren, Omur E., Mascaro, Aaron, Yuan, Shuaishuai, Shirani, Javad, Bevan, Kirk H. et Grutter, Peter.
2020.
« Ergodic and nonergodic dynamics of oxygen vacancy migration at the nanoscale in inorganic perovskites ».
Nano Letters, vol. 20, nº 10.
pp. 7530-7535.
Dahmani, Jawad, Laporte, Catherine, Pereira, Daniel, Bélanger, Pierre et Petit, Yvan.
2020.
« Predictive model for designing soft-tissue mimicking ultrasound phantoms with adjustable elasticity ».
IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 67, nº 4.
pp. 715-726.
Dang, Dinh-Dong, Pham, Xuan-Tan et Nguyen, Chi-Cong.
2020.
« Thermal performance prediction in the air gap of a rotor-stator configuration: effects of numerical models ».
Journal of Thermal Science and Engineering Applications, vol. 29, nº 1.
pp. 206-218.
Decaulne, Armelle, Joliet, Fabienne, Chanteloup, Laine, Herrmann, Thora, Bhiry, Najat et Haillot, Didier.
2020.
« Vers une démarche scientifique intégrative : l'exemple de l'Observatoire Hommes-milieux du Nunavik (Canada) ».
Journal of Interdisciplinary Methodologies and Issues in Sciences, vol. 6.
Deluy, Marc-Claudel, Khay, Mohamed, Ngo, Anh Dung, Dubé, Martine et Ganesan, Rajamohan.
2020.
« Effects of environmental conditions on the axial tensioncompression fatigue behavior of carbon/epoxy plain-weave laminates containing flaws ».
Journal of Composite Materials, vol. 54, nº 27.
pp. 4215-4230.
Diotalevi, Lucien, Bailly, Nicolas, Wagnac, Éric, Mac-Thiong, Jean-Marc, Goulet, Julien et Petit, Yvan.
2020.
« Dynamics of spinal cord compression with different patterns of thoracolumbar burst fractures: Numerical simulations using finite element modelling ».
Clinical Biomechanics, vol. 72.
pp. 186-194.
Doutres, Olivier, Terroir, Jonathan, Jolly, Caroline, Gauvin, Chantal, Martin, Laurence et Negrini, Alessia.
2020.
« Towards a metatheory explaining hearing protection device use among workers ».
[Résumé d'une communication à une conférence]. Journal of the Acoustical Society of America, vol. 148, nº 4.
p. 2778.
Dureau, Clément, Novelli, Marc, Arzaghi, Mandana, Massion, Roxane, Bocher, Philippe, Nadot, Yves et Grosdidier, Thierry.
2020.
« On the influence of ultrasonic surface mechanical attrition treatment (SMAT) on the fatigue behavior of the 304L austenitic stainless steel ».
Metals, vol. 10, nº 1.
Eesaee, Mostafa, David, Eric et Demarquette, Nicole R..
2020.
« Dielectric relaxation dynamics of clay-containing low-density polyethylene blends and nanocomposites ».
Polymer Engineering and Science, vol. 60, nº 5.
pp. 968-978.
Elelwi, M., Kuitche, M. A., Botez, R. M. et Dao, T. M..
2020.
« Comparison and analyses of a variable span-morphing of the tapered wing with a varying sweep angle ».
Aeronautical Journal, vol. 124, nº 1278.
pp. 1146-1169.
Elmughrabi, Walid, Sassi, Oumaima Ben, Dao, Thien-My et Chabaane, Amin.
2020.
« Collaborative supply chain planning and scheduling of construction projects ».
IFAC - Papers Online, vol. 53, nº 2.
pp. 10761-10766.
Esouilem, M., Bouzid, H. A. et Nadeau, S..
2020.
« Frequency failure causes analysis of pressure vessel and piping equipment: case study of the Alberta Petrochemical Industry ».
ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering, vol. 6, nº 4.
Fayed, Eslam M., Shahriari, Davood, Saadati, Mohammad, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun.
2020.
« Influence of homogenization and solution treatments time on the microstructure and hardness of Inconel 718 fabricated by laser powder bed fusion process ».
Materials, vol. 13, nº 11.
Feujofack Kemda, B. V., Barka, Noureddine, Jahazi, M. et Osmani, D..
2020.
« Optimization of resistance spot welding process applied to A36 mild steel and hot dipped galvanized steel based on hardness and nugget geometry ».
International Journal of Advanced Manufacturing Technology, vol. 106, nº 5-6.
pp. 2477-2491.
Foroozmehr, Fayaz et Bocher, Philippe.
2020.
« Effect of low temperature intercritical heat-treatment on stable crack growth behavior in 13% Cr-4% Ni martensitic stainless steel multipass weldments ».
Engineering Fracture Mechanics, vol. 240.
Foroozmehr, Fayaz et Bocher, Philippe.
2020.
« On the ductile rupture of 13% Cr-4% Ni martensitic stainless steels ».
International Journal of Fracture, vol. 224, nº 1.
pp. 67-82.
Fournely, Marion, Petit, Yvan, Wagnac, Eric, Evin, Morgane et Arnoux, Pierre-Jean.
2020.
« Effect of experimental, morphological and mechanical factors on the murine spinal cord subjected to transverse contusion: A finite element study ».
PLoS ONE, vol. 15, nº 5.
Garza, Viridiana G. Morales, Sumner, Jonathon, Nathan, Jorn et Masson, Christian.
2020.
« Evaluating the accuracy of RANS wind flow modeling over forested terrain. Part 2: Impact on capacity factor for moderately complex topography ».
Journal of Solar Energy Engineering, vol. 142, nº 2.
p. 12.
Godin, Stéphane, Hamel-Akré, Johann, Thibault, Denis, Serventi, Alessandra-Maria et Bocher, Philippe.
2020.
« Ni and Mn enrichment effects on reformed austenite: thermodynamical and low cycle fatigue stability of 13%Cr–4%Ni and 13%Cr–6%Ni stainless steels ».
SN Applied Sciences, vol. 2, nº 3.
Goulet, Julien, Richard-Denis, Andréane, Petit, Yvan, Diotalevi, Lucien et Mac-Thiong, Jean-Marc.
2020.
« Morphological features of thoracolumbar burst fractures associated with neurological outcome in thoracolumbar traumatic spinal cord injury ».
European Spine Journal, vol. 29, nº 10.
pp. 2505-2512.
Grigorie, Teodor Lucian, Khan, Shehryar, Botez, Ruxandra Mihaela, Mamou, Mahmoud et Mébarki, Youssef.
2020.
« Design and experimental testing of a control system for a morphing wing model actuated with miniature BLDC motors ».
Chinese Journal of Aeronautics, vol. 33, nº 4.
pp. 1272-1287.
Hao, Daxian, Wang, Wei, Liu, Zhaoheng et Yun, Chao.
2020.
« Experimental study of stability prediction for high-speed robotic milling of aluminum ».
Journal of Vibration and Control, vol. 26, nº 7/8.
pp. 387-398.
Huiyang, Xu, Sgard, Franck, Carillo, Kévin, Wagnac, Éric et de Guise, Jacques.
2020.
« A three-dimensional finite-element model of a human head for predicting the objective occlusion effect induced by earplugs ».
[Résumé d'une communication à une conférence]. Journal of the Acoustical Society of America, vol. 148, nº 4.
p. 2780.
Jamshidi, Maryam, Rimpault, Xavier, Balazinski, Marek et Chatelain, Jean-François.
2020.
« Fractal analysis implementation for tool wear monitoring based on cutting force signals during CFRP/titanium stack machining ».
International Journal of Advanced Manufacturing Technology, vol. 106, nº 9-10.
pp. 3859-3868.
Jamshidinia, Mahdi, Ghasemi-Nanesa, Hadi, Bocher, Philippe, Nuno, Natalia, Poorganji, Behrang et Habibnejad-Korayem, Mahdi.
2020.
« Microstructural alteration of alloyed steel in direct metal laser melting by powder bed deposition system ».
Steel Research International, vol. 91, nº 10.
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad.
2020.
« Effect of turning environments and parameters on surface integrity of AA6061-T6: experimental analysis, predictive modeling, and multi-criteria optimization ».
International Journal of Advanced Manufacturing Technology, vol. 110, nº 9.
pp. 2669-2683.
Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad.
2020.
« On the impacts of tool geometry and cutting conditions in straight turning of aluminum alloys 6061-T6: an experimentally validated numerical study ».
International Journal of Advanced Manufacturing Technology, vol. 106, nº 9-10.
4547–4565.
Kanthabhabha Jeya, Rahul Palaniappan, Zhao, Zijian et Bouzid, Abdel-Hakim.
2020.
« Creep-relaxation modeling of HDPE and polyvinyl chloride bolted flange joints ».
Journal of Pressure Vessel Technology, vol. 142, nº 5.
Koushki, Pantea, Kwok, Tsz-Ho, Hof, Lucas et Wuthrich, Rolf.
2020.
« Reinforcing silicone with hemp fiber for additive manufacturing ».
Composites Science and Technology, vol. 194.
pp. 141-151.
Kudryashova, A., Sheremetyev, V., Lukashevich, K., Cheverikin, V., Inaekyan, K., Galkin, S., Prokoshkin, S. et Brailovski, V..
2020.
« Effect of a combined thermomechanical treatment on the microstructure, texture and superelastic properties of Ti-18Zr-14Nb alloy for orthopedic implants ».
Journal of Alloys and Compounds, vol. 843.
p. 11.
Landau, K. et Nadeau, S..
2020.
« Comparison of different parameters of heart rate frequency of tasks performed during aircraft open-basket ground deicing activities ».
Ergonomics International Journal, vol. 4, nº 6.
Le Floch, Arnaud, Weiss, Julien, Mohammed-Taifour, Abdelouahab et Dufresne, Louis.
2020.
« Measurements of pressure and velocity fluctuations in a family of turbulent separation bubbles ».
Journal of Fluid Mechanics, vol. 902.
Le, Phuoc Luong, Elmughrabi, Walid, Dao, Thien-My et Chaabane, Amin.
2020.
« Present focuses and future directions of decision-making in construction supply chain management: a systematic review ».
International Journal of Construction Management, vol. 20, nº 5.
pp. 490-509.
Lecoublet, Brieg, Boisclair, Dominic, Evin, Morgane, Wagnac, Eric, Petit, Yvan, Aubin, Carl-Eric et Arnoux, Pierre-Jean.
2020.
« Assessing the global range of motion of the helmeted head through rotational and translational measurements ».
International Journal of Crashworthiness, vol. 25, nº 3.
pp. 321-327.
Lessard-Tremblay, Mathieu, Weeks, Joshua, Morelli, Laura, Cowan, Glenn, Gagnon, Ghyslain et Zednik, Ricardo J..
2020.
« Contactless capacitive electrocardiography using hybrid flexible printed electrodes ».
Sensors, vol. 20, nº 18.
Letenneur, Morgan, Imbrogno, Pete, Molavi-Kakhki, Amin et Brailovski, Vladimir.
2020.
« Laser powder bed fusion with intentionally-seeded porosity for prototyping of powder metallurgy parts ».
Journal of Manufacturing and Materials Processing, vol. 4, nº 4.
Letenneur, Morgan, Kreitcberg, Alena et Brailovski, Vladimir.
2020.
« The average grain size and grain aspect ratio in metal laser powder bed fusion: Modeling and experiment ».
Journal of Manufacturing and Materials Processing, vol. 4, nº 1.
Lévesque, J. B., Lanteigne, J., Champliaud, H. et Paquet, D..
2020.
« Modeling solid-state phase transformations of 13Cr-4Ni steels in welding heat-affected zone ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 51, nº 3.
pp. 1208-1220.
Luan, Yu, Doutres, Olivier, Nélisse, Hugues et Sgard, Franck.
2020.
« An explanation of the decrease in the earplug noise reduction when combined with an earmuff on an acoustic test fixture ».
[Résumé d'une communication à une conférence]. Journal of the Acoustical Society of America, vol. 148, nº 4.
p. 2780.
Marani, Mohsen, Songmene, Victor, Zeinali, Mohammadjavad, Kouam, Jules et Zedan, Yasser.
2020.
« Neuro-fuzzy predictive model for surface roughness and cutting force of machined Al20 Mg2Si2Cu metal matrix composite using additives ».
Neural Computing and Applications, vol. 32.
pp. 8115-8126.
Marani, Mohsen, Zeinali, Mohammadjavad, Kouam, Jules, Songmene, Victor et Mechefske, Chris K..
2020.
« Prediction of cutting tool wear during a turning process using artificial intelligence techniques ».
International Journal of Advanced Manufacturing Technology, vol. 111, nº 1-2.
pp. 505-515.
Maurel, Pierre, Weiss, Laurent, Grosdidier, Thierry et Bocher, Philippe.
2020.
« How does surface integrity of nanostructured surfaces induced by severe plastic deformation influence fatigue behaviors of Al alloys with enhanced precipitation? ».
International Journal of Fatigue, vol. 140.
Menanteau, Sébastien et Lemaire, Romain.
2020.
« Analysis of the influence of the conduction sub-model formulation on the modeling of laser-induced incandescence of diesel soot aggregates ».
Entropy, vol. 22, nº 1.
Mendoza, Alejandro Murrieta, Botez, Ruxandra Mihaela, Ruiz, Hugo et Kessaci, Sonya.
2020.
« Particle swarm optimization with required time of arrival constraint for aircraft trajectory ».
International Journal of Aerospace, vol. 13, nº 2.
pp. 269-291.
Mohseni, Ehsan, Boukani, Hamid Habibzadeh, Franca, Demartonne Ramos et Viens, Martin.
2020.
« A study of the automated eddy current detection of cracks in steel plates ».
Journal of Nondestructive Evaluation, vol. 39, nº 1.
Mohseni, Ehsan, Franca, Demartonne Ramos, Viens, Martin, Xie, Wen Fang et Xu, Baoguang.
2020.
« Finite element modelling of a reflection differential split-D eddy current probe scanning surface notches ».
Journal of Nondestructive Evaluation, vol. 39, nº 2.
Mohseni, Ehsan, Viens, Martin et Xie, Wen-Fang.
2020.
« Adaptive neuro-fuzzy inference system trained for sizing semi-elliptical notches scanned by eddy currents ».
Journal of Nondestructive Evaluation, vol. 39, nº 1.
Monajati, Hossein, Zoghlami, Mariem, Tongne, Amevi et Jahazi, Mohammad.
2020.
« Assessing microstructure-local mechanical properties in friction stir welded 6082-T6 aluminum alloy ».
Metals, vol. 10, nº 9.
Morency, F. et Beaugendre, H..
2020.
« Comparison of turbulent Prandtl number correction models for the Stanton evaluation over rough surfaces ».
International Journal of Computational Fluid Dynamics, vol. 34, nº 4.
pp. 278-298.
Moulins, Anthony, Ma, Lingyue, Dugnani, Roberto et Zednik, Ricardo J..
2020.
« Dynamic crack modeling and analytical stress field analysis in single-crystal silicon using quantitative fractography ».
Theoretical and Applied Fracture Mechanics, vol. 109.
Nguyen, Trung Hieu, Nguyen-Tri, Phuong et Garnier, François.
2020.
« 3D modeling of transformation of gaseous pollutants in the high-pressure turbine of an aircraft engine ».
Propulsion and Power Research, vol. 9, nº 1.
pp. 1-14.
Nijikovsky, Boris, Aguirre Perales, Lydia, Brika, Salah Eddine et Brailovski, Vladimir.
2020.
« Towards reliable optimization of metal powderLubricant mixing for high die filling performance: Exploring a rheology based approach ».
Powder Technology, vol. 362.
pp. 168-176.
Oo, HtunHtun, Wang, Wei et Liu, Zhaoheng.
2020.
« Tool wear monitoring system in belt grinding based on image-processing techniques ».
International Journal of Advanced Manufacturing Technology, vol. 111, nº 7-8.
pp. 2215-2229.
Ouhaman, Assia Ait, Benjelloun, Khalid, Kenné, Jean Pierre et Najid, Najib.
2020.
« The storage space allocation problem in a dry bulk terminal: A heuristic solution ».
IFAC - Papers Online, vol. 53, nº 2.
pp. 10822-10827.
Pereira, Daniel, Fernandes, Julio et Belanger, Pierre.
2020.
« Ex vivo assessment of cortical bone properties using low-frequency ultrasonic guided waves ».
IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 67, nº 5.
pp. 910-922.
Pham, Minh-Nha, Hamelin, Philippe, Hazel, Bruce et Liu, Zhaoheng.
2020.
« A two-stage state feedback controller supported by disturbance-state observer for vibration control of a flexible-joint robot ».
Robotica, vol. 38, nº 6.
pp. 1082-1104.
Piché, Paul, Haillot, Didier, Gibout, Stéphane, Arrabie, Cédric, Lamontagne, Marc-André, Gilbert, Véronique et Bédécarrats, Jean-Pierre.
2020.
« Design, construction and analysis of a thermal energy storage system adapted to greenhouse cultivation in isolated northern communities ».
Solar Energy, vol. 204.
pp. 90-105.
Poissenot-Arrigoni, Bastien, Law, Chun Hong, Sgard, Franck et Doutres, Olivier.
2020.
« Earcanal anthropometry analysis for the design of realistic artificial ears ».
[Résumé d'une communication à une conférence]. Journal of the Acoustical Society of America, vol. 148, nº 4.
p. 2779.
Polotski, V., Kenne, J. P. et Gharbi, A..
2020.
« Kalman filter based production control of a failure-prone single-machine single-product manufacturing system with imprecise demand and inventory information ».
Journal of Manufacturing Systems, vol. 56.
pp. 558-572.
Polyakov, Konstantin, López, Fernando et Viens, Martin.
2020.
« Advanced signal processing techniques to improve the detection of defects in pressure vessels by acoustic emission testing ».
[Article de conférence]. e-Journal of Nondestructive Testing, vol. 25, nº 12.
Poulin, J. R., Kreitcberg, A., Terriault, P. et Brailovski, V..
2020.
« Fatigue strength prediction of laser powder bed fusion processed Inconel 625 specimens with intentionally-seeded porosity: Feasibility study ».
International Journal of Fatigue, vol. 132.
Proteau, Antoine, Zemouri, Ryad, Tahan, Antoine et Thomas, Marc.
2020.
« Dimension reduction and 2D-visualization for early change of state detection in a machining process with a variational autoencoder approach ».
International Journal of Advanced Manufacturing Technology, vol. 111, nº 11-12.
pp. 3597-3611.
Rivera-Gómez, Héctor, Gharbi, Ali, Kenné, Jean-Pierre, Montaño-Arango, Oscar et Corona-Armenta, Jose Ramón.
2020.
« Joint optimization of production and maintenance strategies considering a dynamic sampling strategy for a deteriorating system ».
Computers and Industrial Engineering, vol. 140.
Rohart, Vincent, Laberge Lebel, Louis et Dubé, Martine.
2020.
« Improved adhesion between stainless steel heating element and PPS polymer in resistance welding of thermoplastic composites ».
Composites Part B: Engineering, vol. 188.
pp. 72-83.
Rohart, Vincent, Lebel, Louis L. et Dubé, Martine.
2020.
« Influence of freeze/thaw cycling on the mechanical performance of resistance-welded carbon fibre/polyphenylene sulphide composite joints ».
Journal of Reinforced Plastics and Composites, vol. 39, nº 21-22.
Rohart, Vincent, Lebel, Louis Laberge et Dubé, Martine.
2020.
« Effects of environmental conditions on the lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints ».
Composites Part B: Engineering, vol. 198.
Roth, Simon-Nicolas, Leger, Pierre et Soulaïmani, Azzeddine.
2020.
« Fully-coupled hydro-mechanical cracking using XFEM in 3D for application to complex flow in discontinuities including drainage system ».
Computer Methods in Applied Mechanics and Engineering, vol. 370.
Roth, Simon-Nicolas, Léger, Pierre et Soulaïmani, Azzeddine.
2020.
« Strongly coupled XFEM formulation for non-planar three-dimensional simulation of hydraulic fracturing with emphasis on concrete dams ».
Computer Methods in Applied Mechanics and Engineering, vol. 363.
Saadati, Yousef, Chatelain, Jean-François, Lebrun, Gilbert, Beauchamp, Yves, Bocher, Philippe et Vanderesse, Nicolas.
2020.
« A study of the interlaminar fracture toughness of unidirectional flax/epoxy composites ».
Journal of Composites Science, vol. 4, nº 2.
Saadati, Yousef, Lebrun, Gilbert, Bouvet, Christophe, Chatelain, Jean-François et Beauchamp, Yves.
2020.
« Study of translaminar fracture toughness of unidirectional flax/epoxy composite ».
Composites Part C: Open Access, vol. 1.
Saadati, Yousef, Lebrun, Gilbert, Chatelain, Jean-François et Beauchamp, Yves.
2020.
« Experimental investigation of failure mechanisms and evaluation of physical/mechanical properties of unidirectional flax–epoxy composites ».
Journal of Composite Materials, vol. 54, nº 20.
pp. 2781-2801.
Sadeghifar, Morteza, Javidikia, Mahshad, Songmene, Victor et Jahazi, Mohammad.
2020.
« Finite element simulation-based predictive regression modeling and optimum solution for grain size in machining of Ti6Al4V alloy: Influence of tool geometry and cutting conditions ».
Simulation Modelling Practice and Theory, vol. 104.
Saidi, Mohamed Nejib, Djebara, Abdelhakim, Songmene, Victor et Bahloul, Ali.
2020.
« Experimental evaluation of three local exhaust ventilation systems designed to reduce ultrafine dust emission during a polishing process ».
Aerosol Science and Engineering, vol. 4, nº 1.
pp. 9-17.
Samad, Abdallah, Tagawa, Gitsuzo B. S., Morency, François et Volat, Christophe.
2020.
« Predicting rotor heat transfer using the viscous blade element momentum theory and unsteady vortex lattice method ».
Aerospace, vol. 7, nº 7.
Sarafan, Sheida, Wanjara, Priti, Levesque, Jean-Benoit, Gholipour, Javad, Champliaud, Henri et Mathieu, Louis.
2020.
« Through-thickness residual stresses, microstructure, and mechanical properties of electron beam-welded CA6NM martensitic stainless steel after postweld heat treatment ».
Advances in Materials Science and Engineering, vol. 2020.
Séguin, Bernard, Pinard, Chris, Lussier, Bertrand, Williams, Deanna, Griffin, Lynn, Podell, Brendan, Mejia, Sebastian, Timercan, Anatolie, Petit, Yvan et Brailovski, Vladimir.
2020.
« Limb-sparing in dogs using patient-specific, three-dimensional-printed endoprosthesis for distal radial osteosarcoma: a pilot study ».
Veterinary and Comparative Oncology, vol. 18, nº 1.
pp. 92-104.
Serenari, Federico, Madinehei, Milad, Moghimian, Nima, Fabiani, Davide et David, Éric.
2020.
« Development of reinforced polyester/graphene nanocomposite showing tailored electrical conductivity ».
Polymers, vol. 12, nº 10.
Sergent, Amélie, Rouleau, Dominique M., Beauvais, Éricka, Ménard, Jérémie, Petit, Yvan, Leduc, Stéphane et Laflamme, G. Yves.
2020.
« Quantitative localization of the entry point of the lateral ascending branch of the anterior circumflex humeral artery: a high definition CT-scan radiological study ».
Surgical and Radiologic Anatomy, vol. 42.
pp. 233-237.
Shafiee, Ahad, Nili-Ahmadabadi, Mahmoud, Kim, Hyoung Seop et Jahazi, Mohammad.
2020.
« Development and microstructural characterization of a new wrought high entropy superalloy ».
Metals and Materials International, vol. 26, nº 5.
pp. 591-602.
Sheremetyev, Vadim, Petrzhik, Mikhail, Zhukova, Yulia, Kazakbiev, Alibek, Arkhipova, Anastasia, Moisenovich, Mikhail, Prokoshkin, Sergey et Brailovski, Vladimir.
2020.
« Structural, physical, chemical, and biological surface characterization of thermomechanically treated Ti-Nb-based alloys for bone implants ».
Journal of Biomedical Materials Research - Part B Applied Biomaterials, vol. 108, nº 3.
pp. 647-662.
Shnfir, Mohamed, Kouam, J. et Songmene, V..
2020.
« Ultrafine particle emission during high-speed milling of hardened AISI 1045 steel ».
International Journal of Advanced Manufacturing Technology, vol. 110, nº 3-4.
pp. 617-627.
Slamani, Mohamed et Chatelain, Jean-François.
2020.
« Kriging versus Bezier and regression methods for modeling and prediction of cutting force and surface roughness during high speed edge trimming of carbon fiber reinforced polymers ».
Measurement: Journal of the International Measurement Confederation, vol. 152.
Slim, Hussein et Nadeau, Sylvie.
2020.
« A mixed rough sets/fuzzy logic approach for modelling systemic performance variability with FRAM ».
Sustainability, vol. 12, nº 5.
Slim, Hussein et Nadeau, Sylvie.
2020.
« A proposition for combining rough sets, fuzzy logic and FRAM to address methodological challenges in safety management: A discussion paper ».
Safety, vol. 6, nº 4.
Soh, Mathieu Fokwa, Barbeau, Daniel, Doré, Sylvie et Forgues, Daniel.
2020.
« Qualitative analysis of Request for Information to identify design flaws in steel construction projects ».
Organization, Technology and Management in Construction, vol. 12, nº 1.
pp. 2083-2094.
Sta, Marwa, Aguiar, Graziele, Forni, Abilio A. J., Medeiros, Simone F., Santos, Amilton M. et Demarquette, Nicole R..
2020.
« Design and characterization of PNVCL-based nanofibers and evaluation of their potential applications as scaffolds for surface drug delivery of hydrophobic drugs ».
Journal of Applied Polymer Science, vol. 137, nº 11.
St-Onge, David, Varadharajan, Vivek Shankar, Svogor, Ivan et Beltrame, Giovanni.
2020.
« From design to deployment: decentralized coordination of heterogeneous robotic teams ».
Frontiers in Robotics and AI, vol. 7.
Ta Dinh, Xuan, Sheremetyev, V. A., Kudryashova, A. A., Galkin, S. P., Andreev, V. A., Prokoshkin, S. D. et Brailovski, V..
2020.
« Influence of the combined radial shear rolling and rotary forging on the deformation mode of the small-diameter rod billet made of titanium alloys ».
Russian Journal of Non-Ferrous Metals, vol. 61, nº 3.
pp. 271-279.
Tabaie, Seyedmohammad, Rézaï-Aria, Farhad et Jahazi, Mohammad.
2020.
« Microstructure evolution of selective laser melted inconel 718: Influence of high heating rates ».
Metals, vol. 10, nº 5.
Tabiai, I., Texier, D., Bocher, P., Therriault, D. et Levesque, M..
2020.
« In-situ full field out of plane displacement and strain measurements at the micro-scale in single reinforcement composites under transverse load ».
Experimental Mechanics, vol. 60, nº 3.
pp. 359-377.
Torré, Jean-Philippe, Plantier, Frédéric, Marlin, Laurent, André, Rémi et Haillot, Didier.
2020.
« A novel stirred microcalorimetric cell for DSC measurements applied to the study of ice slurries and clathrate hydrates ».
Chemical Engineering Research and Design, vol. 160.
pp. 465-475.
Toubal, Lofti, Chaabouni, Hamed, Bocher, Philippe et Jianqiang, Chen.
2020.
« Monitoring fracture of high-strength steel under tensile and constant loading using acoustic emission analysis ».
Engineering Failure Analysis, vol. 108.
Tran, Dinh Son, Songmene, Victor, Ngo, Anh Dung et Kouam, Jules.
2020.
« Effects of reinforcements and cutting parameters on machinability of polypropylene-based biocomposite reinforced with biocarbon particles and chopped miscanthus fibers ».
International Journal of Advanced Manufacturing Technology, vol. 110, nº 11-12.
pp. 3423-3444.
Tran, Dinh Son, Songmene, Victor, Ngo, Anh Dung, Kouam, Jules, Rodriguez-Uribe, Arturo, Misra, Manjusri et Mohanty, Amar Kumar.
2020.
« Experimental investigation on machinability of polypropylene reinforced with miscanthus fibers and biochar ».
Materials, vol. 13, nº 5.
Tuyêt Mai Ngô, Valérie, Nadeau, Sylvie et Hallé, Stéphane.
2020.
« Validation of ergonomic criteria of a cooling vest for deep and ultra-deep mining ».
International Journal of Industrial Ergonomics, vol. 78.
Vafadar, Ali Khazraiyan, Bouzid, Abdel-Hakim et Ngô, Anh Dung.
2020.
« Analytical modeling of FRP hubbed flanges ».
International Journal of Pressure Vessels and Piping, vol. 188.
Vanderesse, N., Texier, D. et Bocher, P..
2020.
« Effect of porosities on brazed martensitic steel tensile properties: 2D and 3D pre-mortem vs post-mortem characterizations ».
Materials Characterization, vol. 160.
Varadharajan, Vivek Shankar, St-Onge, David, Adams, Bram et Beltrame, Giovanni.
2020.
« Swarm relays: Distributed self-healing ground-and-air connectivity chains ».
IEEE Robotics and Automation Letters, vol. 5, nº 4.
pp. 5347-5354.
Vedaei-Sabegh, Ali, Morin, Jean-Benoit et Jahazi, Mohammad.
2020.
« Influence of nickel on high-temperature oxidation and characteristics of oxide layers in two high-strength steels ».
Steel Research International, vol. 91, nº 4.
Veit, Geoffrey et Bélanger, Pierre.
2020.
« An ultrasonic guided wave excitation method at constant phase velocity using ultrasonic phased array probes ».
Ultrasonics, vol. 102.
Voix, Jérémie.
2020.
« The journey to hearing protection fit-testing: From a doctoral project, to meeting a mentor, to a world recognized best practice ».
[Résumé d'une communication à une conférence]. Journal of the Acoustical Society of America, vol. 148, nº 4.
p. 2566.
Wang, Jintian, Chen, Zhiqiang, Guan, Aaron, Demarquette, Nicole Raymonde et Naguib, Hani E..
2020.
« Ionic liquids facilitated dispersion of chitin nanowhiskers for reinforced epoxy composites ».
Carbohydrate Polymers, vol. 247.
Yalpanian, Ali et Guilbault, Raynald.
2020.
« A fast correction for half-space theory applied to contact modeling of bodies with curved free surfaces ».
Tribology International, vol. 147.
Yeganefar, Ali, Niknam, Seyed Ali et Songmene, Victor.
2020.
« Machinability study of aircraft series aluminium alloys 7075-T6 and 7050-T7451 ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 44, nº 3.
pp. 427-439.
Zemouri, Ryad, Levesque, Melanie, Amyot, Normand, Hudon, Claude, Kokoko, Olivier et Tahan, Souheil Antoine.
2020.
« Deep convolutional variational autoencoder as a 2D-visualization tool for partial discharge source classification in hydrogenerators ».
IEEE Access, vol. 8.
pp. 5438-5454.
Zhang, C., Jahazi, M. et Tremblay, R..
2020.
« Simulation and experimental validation of the effect of superheat on macrosegregation in large-size steel ingots ».
International Journal of Advanced Manufacturing Technology, vol. 107, nº 1-2.
pp. 167-175.
Zhang, Chunping, Jahazi, Mohammad et Gallego, Paloma Isabel.
2020.
« On the impact of microsegregation model on the thermophysical and solidification behaviors of a large size steel ingot ».
Metals, vol. 10, nº 1.
Zhuldybina, Mariia, Ropagnol, Xavier, Bois, Chloé, Zednik, Ricardo J. et Blanchard, François.
2020.
« Printing accuracy tracking with 2D optical microscopy and super-resolution metamaterial-assisted 1D terahertz spectroscopy ».
npj Flexible Electronics, vol. 4, nº 1.
Zinsalo, Joël M., Lamarche, Louis et Raymond, Jasmin.
2020.
« Injection strategies in an enhanced geothermal system based on discrete fractures model ».
Applied Thermal Engineering, vol. 169.
Zongo, Floriane, Simoneau, Charles, Timercan, Anatolie, Tahan, Antoine et Brailovski, Vladimir.
2020.
« Geometric deviations of laser powder bedfused AlSi10Mg components: numerical predictions versus experimental measurements ».
International Journal of Advanced Manufacturing Technology, vol. 107.
pp. 1411-1436.
Zorgani, M., Garcia-Mateo, Carlos et Jahazi, M..
2020.
« The role of ausforming in the stability of retained austenite in a medium-C carbide-free bainitic steel ».
Journal of Materials Research and Technology, vol. 9, nº 4.
pp. 7762-7776. Compte rendu de conférence
Alqudsi, Alhaytham Y., Ghunem, Refat Atef, David, Éric et Hadjadj, Yazid.
2020.
« The role of filler interface in suppressing the erosion of silicone rubber under DC voltage ».
In Proceedings of the 2020 IEEE 3rd International Conference on Dielectrics (ICD) (En ligne, July 05-09, 2020)
pp. 154-157.
IEEE.
Anguiozar, Nerea Urrestilla et St-Onge, David.
2020.
« Measuring cognitive load: Heart-rate variability and pupillometry assessment ».
In ICMI '20: International Conference on Multimodal Interaction (Utrecht, the Netherlands, Oct. 25-29, 2020)
pp. 405-410.
ACM.
Benasson, I., Wagnac, E., Diotalevi, L., Moore, D., Mac-Thiong, J. M. et Petit, Y..
2020.
« Gait analysis of a post induced traumatic spinal cord injury porcine model ».
In 42nd Annual International Conferences of the IEEE Engineering in Medicine and Biology Society (EMBC) (Montreal, QC, Canada, July 20-24, 2020)
pp. 3803-3806.
Institute of Electrical and Electronics Engineers Inc..
Benfriha, Khaled, Bouzid, Abdel-Hakim, Wardle, Peter, Deligant, Michael, Benabid, Yacine et Adjoul, Oussama.
2020.
« The influence of common business models on design processes life cycle and maintenance costs of products and systems ».
In Proceedings IRF2020: 7th International Conference Integrity-Reliability-Failure (Funchal, Portugal, Sept. 06-10, 2020)
pp. 683-692.
INEGI-FEUP.
Blancke, Olivier, Komljenovic, Dragan, Tahan, Antoine, Amyot, Normand, Hudon, Claude, Boudreau, Jean-François et Lévesque, Mélanie.
2020.
« From data to asset health management in the context of hydropower generation: A holistic concept ».
In Engineering Assets and Public Infrastructures in the Age of Digitalization : Proceedings of the 13th World Congress on Engineering Asset Management (Stavanger, Norway, Sept. 24-26, 2018)
pp. 258-266.
Cham, Switzerland : Springer International Publishing.
Bouzid, A..
2020.
« Liquid leak rate predictions in packed stuffing boxes ».
In BHR Group – 25th International Conference on Fluid Sealing (Manchester, UK, March 4-5, 2020)
pp. 5-18.
Bouzid, Abdel-Hakim.
2020.
« Liquid leak rate predictions in packed stuffing boxes ».
In 25th International Conference on Fluid Sealing (Manchester, UK, Mar. 04-05, 2020)
pp. 5-18.
BHR Group Limited.
Boyadjian, Quentin, Vanderesse, Nicolas, Toews, Matthew et Bocher, Philippe.
2020.
« Detecting defects in materials using deep convolutional neural networks ».
In Image Analysis and Recognition : 17th International Conference, ICIAR 2020, Póvoa de Varzim, Portugal, June 24–26, 2020, Proceedings, Part I (Póvoa de Varzim, Portugal, June 24-26, 2020)
Coll. « Lecture Notes in Computer Science », vol. 12131.
pp. 293-306.
Springer.
Cao, Yanjun, St-Onge, David et Beltrame, Giovanni.
2020.
« Collaborative localization and tracking with minimal infrastructure ».
In 18th IEEE International NEWCAS Conference (NEWCAS) (Montreal, QC, Canada, June 16-19, 2020)
pp. 114-117.
Piscataway, NJ, USA : IEEE.
Chatenet, Quentin, Fouladirad, Mitra, Remy, Emmanuel, Gagnon, Martin, Tôn-Thât, Laurent et Tahan, Antoine.
2020.
« On the performance of the maximum likelihood estimation method for gamma process ».
In 29th European Safety and Reliability Conference (ESREL) (Hannover, Germany, Sept. 22-26, 2019)
pp. 943-950.
Research Publishing Services.
Chebil, Jihen, Marchand, Geneviève, Debia, Maximilien, Wingert, Loïc et Hallé, Stéphane.
2020.
« Modeling of airflow and dispersion of aerosols in a thanatopraxy room ».
In Advances in Human Factors and Simulation - Proceedings of the AHFE 2019 International Conference on Human Factors and Simulation (Washington, D.C., USA, July 24-28, 2019)
Coll. « Advances in Intelligent Systems and Computing », vol. 958.
pp. 215-223.
Springer Verlag.
Delpla, Victor, Hof, Lucas A. et Kenné, Jean-Pierre.
2020.
« Closed loop supply chain optimization for Circular Manufacturing using Industry 4.0 technologies ».
In 8th International Conference on Information Systems, Logistics and Supply Chain: Interconnected Supply Chains in an Era of Innovation (ILS) (Austin, TX, USA, Apr. 22-24, 2020)
pp. 220-227.
International Conference on Information Systems, Logistics and Supply Chain.
Diotalevi, L., Wagnac, E., Laurent, H. et Petit, Y..
2020.
« In vitro assessment of the role of the nucleus pulposus in the mechanism of vertebral body fracture under dynamic compressive loading using high-speed cineradiography ».
In 42nd Annual International Conferences of the IEEE Engineering in Medicine and Biology Society (EMBC) (Montreal, QC, Canada, July 20-24, 2020)
pp. 4717-4720.
Institute of Electrical and Electronics Engineers Inc..
Ghinet, Sebastian, Bouche, Patrick, Padois, Thomas, Pires, Louis et Doutres, Olivier.
2020.
« Experimental validation of acoustic metamaterials noise attenuation performance for aircraft cabin applications ».
In INTER-NOISE and NOISE-CON Congress and Conference Proceedings (Seoul, Korea, Aug. 23-26, 2020)
pp. 222-232.
Institute of Noise Control Engineering.
Gnonhoue, O. G., Velazquez-Salazar, A., Millard, L., Joncas, S., David, É., Cormier, L., Poudret, R. et Preda, I..
2020.
« Characterization of dielectric walls of capacitors ».
In IEEE 3rd International Conference on Dielectrics (ICD) (Valencia, Spain, July 05-31, 2020)
pp. 653-656.
IEEE.
Grichi, Yosra, Conrad, Héloïse, Beauregard, Yvan, Paquet, Marc et Dao, Thien My.
2020.
« Evaluation of factors driving avionic system obsolescence to enhance forecasting : a case study ».
In Proceedings of the 2016 Industrial and Systems Engineering Research Conference, ISERC 2016 (Anaheim, CA, USA, May 21-24, 2016)
pp. 346-351.
Institute of Industrial Engineers.
Helal, E., Kurusu, R. S., Moghimian, N., Demarquette, N. R. et David, E..
2020.
« Graphene/Thermoplastic based composites ».
In IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (East Rutherford, NJ, USA, Oct. 18-30, 2020)
pp. 342-345.
IEEE.
Helal, Emna, Kurusu, Rafael S., David, Eric, Moghimian, Nima et Demarquette, Nicole R..
2020.
« Time-dependent rheological and electrical properties of LLDPE/EVA blends containing graphene ».
In 35th International Conference of the Polymer Processing Society (PPS) (Cesme-Izmir, Turkey, May 26-30, 2019)
Coll. « AIP Conference Proceedings », vol. 2205.
American Institute of Physics Inc..
Ibrahem, Ibrahem M. A., Akhrif, Ouassima, Moustapha, Hany et Staniszewski, Martin.
2020.
« An ensemble of recurrent neural networks for real time performance modelling of three-spool aero-derivative gas turbine engine ».
In ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition (En ligne, Sept. 21-25, 2020)
ASME.
Ibrahem, Ibrahem M. A, Akhrif, Ouassima, Moustapha, Hany et Staniszewski, Martin.
2020.
« Real time modeling and Hardware in the loop simulation of an aero-derivative gas turbine engine ».
In Proceedings of Global Power and Propulsion Society (En ligne, Sept. 07-09, 2020)
Siemens Energy Canada Limited.
Jafflin, Aurélie et Nadeau, Sylvie.
2020.
« Identifying OHS hazards in university research laboratories
from an ergonomics and human factors perspective ».
In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Berlin, Germany, March 16-18, 2020)
Coll. « Kongress der Gesellschaft für Arbeitswissenschaft »
Dortmund : GfA-Press.
Kahwati, G., Tahan, A., Merkhouf, A., Hudon, C. et Al-Haddad, K..
2020.
« Reliability index for health monitoring of hydroelectric synchronous machine's insulation ».
In 2020 International Conference on Electrical Machines (Gothenburg, Sweden, Aug. 23-26, 2020)
pp. 1418-1423.
New York : IEEE.
Kaufmann, Marcel, Zwiener, Adrian, Robin, Jean-François, Gauthier, Jean-Pierre, Beltrame, Giovanni et St-Onge, David.
2020.
« The sound settler: Spontaneous HRI in an art setting ».
In 15th ACM/IEEE International Conference on Human-Robot Interaction (HRI) (Cambridge, United Kingdom, March 23-26, 2020)
pp. 284-286.
IEEE Computer Society.
Kholodov, Pavel, Sanjosé, Marlène et Moreau, Stéphane.
2020.
« Tip flow evolution in a turbofan rotor for broadband noise diagnostic ».
In AIAA Aviation 2020 Forum (En ligne, June 15-19, 2020)
Coll. « AIAA Paper », vol. AIAA 2020-2521.
AIAA.
Koch, Regis, Sanjosé, Marlène et Moreau, Stéphane.
2020.
« Large-eddy simulation of a single airfoil tip-leakage flow ».
In AIAA Aviation 2020 Forum (En ligne, June 15-19, 2020)
Coll. « AIAA Paper », vol. AIAA 2020-2514.
AIAA.
Kone, Tenon Charly, Ghinet, Sebastian, Dupont, Thomas, Panneton, Raymond, Anant, Grewal et Viresh, Wickramasinghe.
2020.
« Characterization of the acoustic properties of complex shape metamaterials ».
In Proceedings of 2020 International Congress on Noise Control Engineering, INTER-NOISE 2020 (Seoul, South Korea, Aug. 23-26, 2020)
pp. 295-304.
Institute of Noise Control Engineering.
Lallier-Daniels, Dominic, Bolduc-Teasdale, François, Moreau, Stéphane, Guilleminot-Simon, Pierre, Lévesque-Leduc, Michael, Rancourt, David et Sanjosé, Marlène.
2020.
« Predictive acoustic modeling of open propellers using analytical tools and RANS simulations ».
In Aeromechanics for Advanced Vertical Flight Technical Meeting 2020, Held at Transformative Vertical Flight 2020 (San Jose, CA, USA, January 21-23, 2020)
pp. 66-77.
Vertical Flight Society.
Lamothe, Thibaud, Blain, Michel, Gagnon, Martin, Lonchampt, Jérôme et Tahan, Antoine.
2020.
« Technico-economic modelling of maintenance cost for hydroelectric turbine runners ».
In Engineering Assets and Public Infrastructures in the Age of Digitalization : Proceedings of the 13th World Congress on Engineering Asset Management (Stavanger, Norway, Sept. 24-26, 2018)
pp. 238-245.
Cham, Switzerland : Springer International Publishing.
Loucif, Abdelhalim, Zhang, Chunping, Jahazi, Mohammad et Lapierre-Boire, Louis-Philippe.
2020.
« Macrosegregation characteristics of ferrite and austenite stabilizer elements in large size high strength steel ingot ».
In 8th International Conference on Engineering and Innovative Materials (ICEIM 2019) (Tokyo, Japan, Sept. 06-08, 2019)
Coll. « Key Engineering Materials », vol. 846.
pp. 82-86.
Trans Tech Publications Ltd.
Maurel, Pierre, Weiss, Laurent, Bocher, Philippe, Fleury, Eric et Grosdidier, Thierry.
2020.
« Mechanisms of oxide dependent tribological behavior in Ti / Steel sliding and influence of nanostructured surfaces ».
In 14th World Conference on Titanium (Ti 2019) (Nantes, France, June 10-14, 2020)
Coll. « MATEC Web Conferences », vol. 321.
EDP Sciences.
Mishra, Satyendra K., Mac-Thiong, Jean-Marc, Wagnac, Éric et Ung, Bora.
2020.
« Fiber Bragg grating based spectroscopic investigations of spinal cord injuries ».
In Frontiers in Optics / Laser Science (Washington, DC, USA, Sept. 14-17, 2020)
Coll. « OSA Technical Digest »
Optical Society of America.
Mohammed-Taifour, Abdelouahab, Le Floc'h, Arnaud et Weiss, Julien.
2020.
« Active forcing of a pressure-induced turbulent separation bubble ».
In AIAA Scitech Forum 2020 (Orlando, FL, USA, Jan. 06-10, 2020)
Coll. « AIAA Paper », vol. AIAA 2020-1061.
American Institute of Aeronautics and Astronautics Inc..
Mohebi, Elmira et Beauregard, Yvan.
2020.
« Identifying the substantial Big Data (BD) aspects to improve product engineering design ».
In 10th Annual International Conference on Industrial Engineering and Operations Management (Dubai, United Arab Emirates (UAE), Mar. 10-12, 2020)
pp. 1408-1417.
IEOM Society.
Nasrabadi, Mohamadreza Azar et Beauregard, Yvan.
2020.
« Study on the effect of user-generated content in social media on the process of product development: How to make user-generated content into a new product concept ».
In 5th North American Conference on Industrial Engineering and Operations Management (Detroit, MI, USA, Aug. 10-14, 2020)
pp. 1087-1098.
IEOM Society.
Nguyen, Huy Hoan, Champliaud, Henri et Lê, Van Ngan.
2020.
« Circumferential cracking in conventional metal spinning process ».
In 32nd European Modeling and Simulation Symposium (EMSS) (En ligne, Sept. 16-18, 2020)
pp. 165-170.
Dime University of Genoa.
Nijikovsky, B., Brailovski, V., Aguirre Perales, L. Y. et Paris, V..
2020.
« Using powder rheology measurements to optimize the mixing time of iron-based premixes for best die filling performance ».
In International Conference on Powder Metallurgy and Particulate Materials (POWDERMET) (Phoenix, AZ, USA, June 23-26, 2019)
Coll. « Advances in Powder Metallurgy and Particulate Materials »
pp. 683-703.
Metal Powder Industries Federation.
Olufayo, Oluwole A., Boulaares, Mouhamed Dhafer et Songmene, Victor.
2020.
« Machining/machinability of Rene 65 superalloy for aerospace applications ».
In IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT) (Cape town, South Africa, Jan. 20-22, 2020)
Piscataway, NJ, USA : IEEE.
Songmene, V. et Olufayo, O. A..
2020.
« Advances in fine and ultrafine particles emission and dispersion in machining: Cases of metals and granite ».
In Proceedings of 2020 IEEE 11th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT) (Cape town, South Africa, Jan. 20-22, 2020)
pp. 36-45.
IEEE.
St-Onge, David, Bouhour, Camille, Piot, Alexandre, Coffey, Emily, Kaufmann, Marcel, Varadharajan, Vivek Shankar et Beltrame, Giovanni.
2020.
« Teaming with aerial systems: cognitive load assessment ».
In Workshop on Test Methods and Metrics for Effective HRI in Real World Human-Robot Teams at 15th ACM/IEEE International Conference on Human-Robot Interaction (HRI) (Cambridge, United Kingdom, March 23-26, 2020)
Taghavi, Vahid et Beauregard, Yvan.
2020.
« The relationship between lean and industry 4.0: Literature review ».
In 5th North American Conference on Industrial Engineering and Operations Management (Detroit, MI, USA, Aug. 10-14, 2020)
pp. 808-820.
IEOM Society.
Tebib, Safouane, Zhang, Chaofan, Moreau, Stéphane, Brouillette, Martin et Sanjosé, Marlène.
2020.
« Large eddy simulation of an outflow butterfly valve ».
In AIAA Aviation 2020 Forum (En ligne, June 15-19, 2020)
Coll. « AIAA Paper », vol. AIAA 2020-2607.
American Institute of Aeronautics and Astronautics Inc..
Thekkuden, Dinu Thomas, Mourad, Abdel-Hamid I. et Bouzid, Abdel-Hakim.
2020.
« Impact of grooves in hydraulically expanded tube-to-tubesheet joints ».
In ASME 2020 Pressure Vessels and Piping Conference (PVP) (En ligne, Aug. 03, 2020)
Coll. « American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP »
American Society of Mechanical Engineers (ASME).
Thekkuden, Dinu Thomas, Mourad, Abdel-Hamid I., Bouzid, Abdel-Hakim et Darabseh, Tariq.
2020.
« Impact of expansion pressure on wall thinning and contact pressure for hydraulically expanded tube-to-tubesheet joints: Numerical analysis ».
In Advances in Science and Engineering Technology International Conferences (ASET) : Advanced Materials, Design and Manufacturing (Dubai, United Arab Emirates, Feb. 04-06, 2020)
IEEE.
Torres Medina, Yaniel et Nadeau, Sylvie.
2020.
« Operator 4.0 in manufacturing: trends, potential technologies and future perspectives ».
In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Berlin, Germany, March 16-18, 2020)
Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 66.
Dortmund : GfA-Press.
Vafadar, Ali Khazraiyan, Bouzid, Abdel-Hakim et Ngo, Anh Dung.
2020.
« An analytical anisotropic model to analyze fiber reinforced polymer bolted flange joints ».
In ASME 2020 Pressure Vessels and Piping Conference (PVP) (En ligne, Aug. 03, 2020)
Coll. « American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP »
American Society of Mechanical Engineers (ASME).
Venditti, Tony, Nguyen Duy Phuong, Tran et Ngô, Anh Dung.
2020.
« Safety analysis of an industrial system using markov reliability diagram with repair ».
In Advances in Safety Management and Human Performance : Proceedings of the AHFE 2020 Virtual Conferences on Safety Management and Human Factors, and Human Error, Reliability, Resilience, and Performance (En ligne, July 16-20, 2020)
Coll. « Advances in Intelligent Systems and Computing », vol. 1213.
pp. 185-190.
Cham, Switzerland : Springer International Publishing.
Zhao, Zijian et Bouzid, Abdel-Hakim.
2020.
« Stress analysis of SS316l tube die expansion for high pressure gas coolers ».
In ASME 2020 Pressure Vessels and Piping Conference (PVP) (En ligne, Aug. 03, 2020)
Coll. « American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP »
American Society of Mechanical Engineers (ASME).
Zhu, Linbo, Hong, Jun, Shi, Zhenming et Bouzid, Abdel-Hakim.
2020.
« Numerical simulation of the assembly process of bolted flange joints used in rotating machinery ».
In ASME 2020 Pressure Vessels and Piping Conference (PVP) (En ligne, Aug. 3, 2020)
Coll. « American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP »
American Society of Mechanical Engineers (ASME).
Zhuldybina, M., Ropagnol, X., Bois, C., Zednik, R. J. et Blanchard, F..
2020.
« Babinet's principle for quality control of printed electronics ».
In Photonics North (PN) (Niagara Falls, ON, Canada, May 26-28, 2020)
Piscataway, NJ, USA : IEEE.
Zhuldybina, M., Ropagnol, X., Bois, C., Zednik, R. J. et Blanchard, F..
2020.
« Quality control of conductive ink distribution using terahertz spectroscopy ».
In International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz) (Buffalo, NY, USA, Nov. 08-13, 2020)
p. 343.
IEEE. Livre
Askeland, D., Wright, W., Demarquette, N. R. et Zednik, R. J..
2020.
« Science et génie des matériaux ».
Édition SI.
Les éditions Raynald Goulet Inc.. 622 p.
Thomas, Marc.
2020.
« Vibrations mécaniques : Recueil d'exercices et corrigés ».
Montréal ; Québec : ÉTS ; Presses de l'Université du Québec. 578 p. Chapitre de livre
Poulin, Jean-René, Letenneur, Morgan, Terriault, Patrick et Brailovski, Vladimir.
2020.
« Influence of intentionally induced porosity and postprocessing conditions on the mechanical properties of laser powder bed–fused Inconel 625 ».
In
Structural Integrity of Additive Manufactured Parts.
pp. 294-312. West Conshohocken, PA : ASTM International. Article de revue ou de magazine, non révisé par les pairs
Carillo, Kévin, Doutres, Olivier et Sgard, Franck.
28 septembre 2020.
« L’effet d’occlusion : quand la perception de notre voix nous dérange ».
[Article de recherche]. Substance ÉTS.
Carillo, Kévin, Doutres, Olivier et Sgard, Franck.
28 septembre 2020.
« When Hearing our own Voice is Disturbing: the Occlusion Effect ».
[Article de recherche]. Substance ÉTS.
Poissenot-Arrigoni, Bastien, Law, Chun Hong, Sgard, Franck et Doutres, Olivier.
14 décembre 2020.
« Améliorer les bouchons d’oreilles pour protéger les travailleurs ».
[Article de recherche]. Substance ÉTS.
Poissenot-Arrigoni, Bastien, Law, Chun Hong, Sgard, Franck et Doutres, Olivier.
14 décembre 2020.
« Preserving workers’ hearing health by improving earplug efficiency ».
[Article de recherche]. Substance ÉTS.
Torres Medina, Yaniel et Nadeau, Sylvie.
23 septembre 2020.
« Avènement de l’opérateur 4.0 : l’avenir du secteur manufacturier ».
[Article de recherche]. Substance ÉTS.
Torres Medina, Yaniel et Nadeau, Sylvie.
23 septembre 2020.
« The Future in Manufacturing - The Rise of Operator 4.0 ».
[Article de recherche]. Substance ÉTS.
AfficheBouserhal, Rachel E. et Voix, Jérémie. 2020. « SpEAR: A speech database for the advancement of hearing protection devices equipped with in-ear microphones ». Affiche présentée lors de la conférence : National Hearing Conservation Association 44th Annual Conference (Miramar Beach, FL, USA, Feb. 20-22, 2020). Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad. 2020. « 3D Finite element simulation of residual stresses induced by wet turning of AA6061-T6 ». Affiche numéro 49 présentée lors de la conférence : 17th Encyclopaedia Archives Encyclopaedia of Research on Aluminium in Québec REGAL Students' Day = 17e Encyclopédie de la Recherche sur l’Aluminium au Québec : Journée des étudiants du REGAL (En ligne, Nov. 05-06, 2020). Tabaie, S., Rézaï-Aria, F. et Jahazi, M.. 2020. « Effect of pre-heat treatment on micro-segregation of nb in the microstructure of linear friction welded inconel 718 fabricated by selective laser melting ». Affiche présentée lors de la conférence : Conference of Metallurgists (Toronto, ON, Canada, Aug. 24-27, 2020). Voix, Jérémie. 2020. « The connected protected worker at the age of IoT ». Affiche présentée lors de la conférence : National Hearing Conservation Association 44th Annual Conference (Miramar Beach, FL, USA, Feb. 20, 2020). CommunicationAhmadpour, Elham, Valois, I., Eddy Ryan, P., Thout, R., Hallé, S. et Debia, M.. 2020. « Comparison of different methodologies for evaluating trichloramine exposures in indoor swimming pools ». Communication lors de la conférence : AIHce EXP2020 (En ligne, June 01-03, 2020). Bailly, Nicolas, Diotalevi, Lucien, Beauséjour, Marie-Hélène, Wagnac, Éric, Mac-Thiong, Jean-Marc et Petit, Yvan. 2020. « A numerical study on the pathogenesis of central cord syndrome ». Communication lors de la conférence : 20th Annual Scientific Conference of the Canadian Spine Society (Whistler, BC, Canada, Feb. 26-29, 2020). Bajgholi, Mohammad E., Rousseau, Gilles, Viens, Martin et Thibault, Denis. 2020. « Performance of Ultrasonic Inspection on hydroelectric turbine runner ». Communication lors de la conférence : 3rd International Symposium on Structural Health Monitoring and Nondestructive Testing (Québec, QC, Canada, Nov. 25-26, 2020). Beauséjour, Marie-Hélène, Wagnac, Éric, Arnoux, Jean-Pierre et Petit, Yvan. 2020. « Pattern of disco-ligamentous injuries influences spinal cord stresses and strains in post-traumatic flexion ». Communication lors de la conférence : SIMBIO-M 2020 (Turin, Italy, June 18-19, 2020). Benacchio, S., Doutres, O. et Sgard, F.. 2020. « Numerical modeling of the vibro-acoustic behavior of an artificial ear dedicated to the study of hearing protectors ». Communication lors de la conférence : e-Forum Acusticum (En ligne, Dec. 07-11, 2020). Benesch, Danielle, Delain, Corentin, Blain-Moraes, Stefanie et Voix, Jérémie. 2020. « Listen to your heart : Exploring the link between in-ear audio and emotions ». Communication lors de la conférence : Acoustics Week in Canada (En ligne, Oct. 09-10, 2020). Comeau, F. A., Giordano, N., Haillot, D. et Raymond, J.. 2020. « Valorisation de l’énergie géothermique peu profonde pour remplacer le chauffage au diesel au Nunavik ». Communication lors de la conférence : Colloque annuel du Centre d’étude Nordique (Montréal, QC, Canada, 13-14 fév. 2020). Delain, Corentin, Moshgelani, Farid, Bouserhal, Rachel E. et Voix, Jérémie. 2020. « In-ear speech capture on electronic hearing protectors: optimization of the denoising algorithm in transparent mode ». Communication lors de la conférence : Acoustics Week in Canada (En ligne, Oct. 09, 2020). Einig, Lucas, Dumoulin, Romain et Voix, Jérémie. 2020. « HPD Fit-testing feature developed within a hearing-care platform for musicians ». Communication lors de la conférence : Acoustics Week in Canada (En ligne, Oct. 09, 2020). Giordano, N., Gunawan, E., Comeau, F. A., Miranda, M. M., Langevin, H., Covelli, M., Piché, P., Gibout, S., Haillot, D., Casasso, A., Chicco, J., Mandrone, G., Comina, C., Fortier, R. et Raymond, J.. 2020. « Shallow geothermal technology as alternative to diesel heating of subarctic off-grid autochthonous communities in Northern Québec (Canada) ». Communication lors de la conférence : European Geosciences Union - General Assembly (EGU2020-508) (En ligne, May 03-08, 2020). Haillot, D., Piche, P., Gibout, S., Arrabie, C., Rousse, D., Giordano, N. et Raymond, J.. 2020. « Dimensionnement, construction et analyse d'un système de stockage thermique adapté à la culture en serre au Nunavik ». Communication lors de la conférence : Colloque annuel du Centre d’étude Nordique (Montréal, QC, Canada, 13-14 fév. 2020). Moshgelani, Farid, Blain-Moraes, Stefanie et Voix, Jérémie. 2020. « In-ear audio and speech processing algorithms for digital hearing protectors ». Communication lors de la conférence : Acoustics Week in Canada (En ligne, Oct. 09, 2020). Perna, M., Padois, T., Doutres, O. et Dupont, T.. 2020. « Noise management practices associated with outdoor leisure activities ». Communication lors de la conférence : e-Forum Acusticum (En ligne, Dec. 07-11, 2020). Trudeau, C., Bild, E., Padois, T., Perna, M., Dumoulin, R., Dupont, T. et Guastavino, C.. 2020. « Systematic review of municipal noise regulations in Quebec ». Communication lors de la conférence : e-Forum Acusticum (Lyon, France, Dec. 07-11, 2020). Tuduri, L., Wingert, L., Cloutier, Y., Bahloul, A., Hallé, S., Tessier, D., Dolez, P. et Giraudel, J.-L.. 2020. « Webinaire : Performances des matériaux de confection de vêtements de protection contre les aérosols solides ». Communication lors de la conférence : Les rendez-vous des Sciences de l'IRSST (En ligne, 29 sept. 2020). Voix, Jérémie. 2020. « The journey to hearing protection fit-testing: From a doctoral project, to meeting a mentor, to a world recognized best practice ». Communication lors de la conférence : Acoustics Virtually Everywhere, 179th Meeting of the Acoustical Society of America). Rapport technique
Benacchio, Simon, Doutres, Olivier, Wagnac, Éric et Sgard, Franck.
2020.
« Conception d'oreilles artificielles réalistes dédiées à l'étude du confort acoustique et physique des protecteurs auditifs intra-auriculaires ».
Coll. « Rapports scientifiques », vol. R-1106.
Montréal : Institut de recherche Robert-Sauvé en santé et en sécurité du travail. 84 p.
Marchand, Geneviève, Wingert, Loïc, Hallé, Stéphane et Debia, Maximilien.
2020.
« Évaluation de l'exposition des thanatopracteurs aux bioaérosols et appréciation du risque sur leur santé ».
Coll. « Rapports scientifiques », vol. R-1110.
Institut de recherche Robert-Sauvé en santé et en sécurité du travail. 78 p.
Padois, Thomas, Perna, Maxime, Doutres, Olivier et Dupont, Thomas.
2020.
« Gestion et planification des activités récréatives extérieures reconnues bruyantes : Guide à l'intention des municipalités ».
[École de technologie supérieure]. 54 p.
Tuduri, Ludovic, Wingert, Loïc, Cloutier, Yves, Hallé, Stéphane, Giraudel, Jean Luc, Bahloul, Ali, Tessier, Dominic et Dolez, Patricia.
2020.
« Vêtements de protection chimique contre les aérosols solides : Performance des matériaux sous différentes conditions d'exposition et caractérisation des déterminants ».
Coll. « Rapports scientifiques », vol. R-1072.
Montréal : Institut de recherche Robert-Sauvé en santé et en sécurité du travail. 95 p. BrevetBouserhal, Rachel, Voix, Jérémie et Falk, Tiago (inventeurs) 22 septembre 2020. « Device and method for improving the quality of in-ear microphone signals in noisy environments ». EERS Global Technologies Inc. (titulaire(s)). Brevet américain US 10,783,904. Nadon, Vincent, Voix, Jérémie, Bockstael, Annelies, Botteldooren, Dick et Lina, Jean-Marc (inventeurs) 11 août 2020. « Method and device for continuous in-ear hearing health monitoring on a human being ». EERS Global Technologies inc. (titulaire(s)). Brevet américain US 10,736,546. Nadon, Vincent, Voix, Jérémie, Bockstael, Annelies, Botteldooren, Dick et Lina, Jean-Marc (inventeurs) 4 février 2020. « Method and device for continuous in-ear hearing health monitoring on a human being ». EERS Global Technologies inc. (titulaire(s)). Brevet américain US 10,548,516. Voix, Jérémie et Laville, Frédéric (inventeurs) 5 mai 2020. « Method and apparatus for objective assessment of in-ear device acoustical performance ». 3M Innovative Properties Company (titulaire(s)). Brevet américain US 10,645,505. |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau