ENGLISH
La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS
RECHERCHER

L'affiliation est "Génie mécanique"

Exporter en format [Atom feed] Atom [RSS feed] RSS 1.0 [RSS2 feed] RSS 2.0
Groupement par Professeur | Année | Type de document | Sans groupement
Aller à 2018
Nombre de documents archivés : 303.

2018

Abattan Spéro, F. A., Lavoué, J., Hallé, S., Drolet, D., Eddy Ryan, P. et Debia, M.. 2018. « Évaluation de la performance de prédiction de deux modèles d’estimation de l’exposition en environnement contrôlé ». Communication lors de la conférence : 40e Congrès Annuel de l'AQHSST (Saguenay, QC, Canada, 16-18 mai, 2018).

Abdedou, Azzedine et Soulaimani, Azzeddine. 2018. « Uncertainty quantification using a new non intrusive stochastic approach: application to the establishment of inundation maps due to dam break flows ». In IRF2018: Proceedings of the 6th International Conference on Integrity-Reliability-Failure (Lisbon, Portugal, July 22-29, 2018) pp. 1103-1104. Inegi-Inst Engenharia Mecanica E Gestao Industrial.

Aghazadeh, Fatemeh, Tahan, Antoine et Thomas, Marc. 2018. « Tool condition monitoring using spectral subtraction algorithm and artificial intelligence methods in milling process ». International Journal of Mechanical Engineering and Robotics Research, vol. 7, nº 1. pp. 30-34.
Compte des citations dans Scopus : 16.

Aghazadeh, Fatemeh, Tahan, Antoine et Thomas, Marc. 2018. « Tool condition monitoring using spectral subtraction and convolutional neural networks in milling process ». International Journal of Advanced Manufacturing Technology, vol. 98, nº 9-12. pp. 3217-3227.
Compte des citations dans Scopus : 148.

Agnard, Stéphane, Hazel, Bruce et Liu, Zhaoheng. 2018. « Study of grinding tool profiling for robotic processes ». Machining Science and Technology, vol. 22, nº 2. pp. 203-224.
Compte des citations dans Scopus : 3.

Aidibe, A., Tahan, A. et Brailovski, V.. 2018. « A novel industrial test artifact for the evaluation of dimensional capabilities of metallic additive manufacturing systems ». In Proceedings of the European Powder Metallurgy Association (EPMA) : Euro PM2018 (Bilbao, Spain, Oct. 14-18, 2018) European Powder Metallurgy Association (EPMA).

Al Sayed, Chady, Vinches, Ludwig et Hallé, Stéphane. 2018. « Experimental investigation of the cooling capacity of gaseous carbon dioxide in free jet expansion for use in portable air-cooling systems ». Open Journal of Applied Sciences, vol. 8, nº 2. pp. 62-72.

Alinejad, Yasaman, Adoungotchodo, Atma, Hui, Eve, Zehtabi, Fatemeh et Lerouge, Sophie. 2018. « An injectable chitosan/chondroitin sulfate hydrogel with tunable mechanical properties for cell therapy/tissue engineering ». International Journal of Biological Macromolecules, vol. 113. pp. 132-141.
Compte des citations dans Scopus : 66.

Anh, Tung Tran, Fréchette, Michel, David, Éric, Veillette, René et Moraille, Patricia. 2018. « Effect of POSS-grafted titanium dioxide on the electrical and thermal properties of LDPE/TiO2 polymer nanocomposite ». Journal of Applied Polymer Science, vol. 135, nº 14.
Compte des citations dans Scopus : 15.

Aranas, Clodualdo Jr., Rodrigues, Samuel, Fall, Ameth, Jahazi, Mohammad et Jonas, John. 2018. « Determination of the critical stress associated with dynamic phase transformation in steels by means of free energy method ». Metals, vol. 8, nº 5.
Compte des citations dans Scopus : 12.

Arhumah, Z., Alkhabbat, M. et Pham, X-T.. 2018. « Heat effect on mechanical properties and microstructure of aluminum welding ». Affiche présentée lors de la conférence : REGAL student’s day (Montreal, QC, Canada, June 18-19, 2018).

Arkhazloo, Nima Bohlooli, Bazdidi-Tehrani, Farzad, Jean-Benoit, Morin et Jahazi, Mohammad. 2018. « A numerical thermal analysis of the heating process of large size forged ingots ». In THERMEC 2018 : 10th International Conference on Processing and Manufacturing of Advanced Materials (Paris, France, July 9-13, 2018) Coll. « Materials Science Forum », vol. 941. pp. 2278-2283. Trans Tech Publications.
Compte des citations dans Scopus : 2.

Arteau, Jean, Patron Gomez, Heidy Esther et Beauregard, Yvan. 2018. « Anthropometry and selection of full body harness: beyond stature and body mass as selection criteria ». In Gesellschaft für Arbeitswissenschaft (Francfort, Allemagne, Fev. 21-23, 2018) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 64. GFA Press.

Aweimer, Ali Salah Omar et Bouzid, Abdel-Hakim. 2018. « Experimental investigation of interfacial and permeation leak rates in sheet gaskets and valve stem packing ». In ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018) ASME.
Compte des citations dans Scopus : 3.

Aweimer, Ali Salah Omar, Bouzid, Abdel-Hakim et Zhao, Zijian. 2018. « Prediction of leak rates through porous materials using analytical and numerical approaches ». In ASME 2018 International Mechanical Engineering Congress and Exposition (Pittsburgh, PA, USA, Nov. 9-15, 2018) ASME.
Compte des citations dans Scopus : 1.

Ayachi, R., Guillon, D., Marmier, F., Vareilles, É., Aldanondo, M., Coudert, T., Geneste, L. et Beauregard, Y.. 2018. « Elaboration d'offres en relation client-fournisseur : vers une exploitation des connaissances pour l'ingénierie des risques ». In MOSIM'18 - 12ème Conférence internationale de Modélisation, Optimisation et SIMulation : L’essor des systèmes connectes dans l’industrie et les services (Toulouse, France, June 27-29, 2018) pp. 229-236. IMT Mines Albi.

Ayachi, R., Guillon, D., Marmier, F., Vareilles, E., Aldanondo, M., Coudert, T., Geneste, L. et Beauregard, Y.. 2018. « Towards a knowledge based support for risk engineering when elaborating offer in response to a customer demand ». In 2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Bangkok, Thailand, Dec. 16-19, 2018) pp. 1056-1060. Piscataway, NJ, USA : IEEE.
Compte des citations dans Scopus : 5.

Azizi, S., Ouellet-Plamondon, C., David, E. et Frechette, M. F.. 2018. « Electric response and thermal properties of ethylene vinyl acetate/graphene-based composite ». In 2018 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Cancun, Mexico, Oct. 21-24, 2018) pp. 62-65. IEEE.
Compte des citations dans Scopus : 2.

Azizi, Sohrab, David, Éric, Fréchette, Michel F., Nguyen-Tri, Phuong et Ouellet-Plamondon, Claudiane M.. 2018. « Electrical and thermal conductivity of ethylene vinyl acetate composite with graphene and carbon black filler ». Polymer Testing, vol. 72. pp. 24-31.
Compte des citations dans Scopus : 50.

Batista, Natassia L., Helal, Emna, Kurusu, Rafael S., Moghimian, Nima, David, Eric, Demarquette, Nicole R. et Hubert, Pascal. 2018. « Commercial graphene high density polyethylene nanocomposites for high volume applications ». In SAMPE Long Beach 2018 Conference and Exhibition (Long Beach, CA, USA, May 21-24, 2018) p. 14. SAMPE.

Beaugendre, H. et Morency, F.. 2018. « Penalization of the Spalart–Allmaras turbulence model without and with a wall function: Methodology for a vortex in cell scheme ». Computers & Fluids, vol. 170. pp. 313-323.
Compte des citations dans Scopus : 9.

Beauséjour, Marie-Hélène, Petit, Yvan, Mac Thiong, Jean-Marc, Arnoux, Jean-Pierre, Hagen, Jérémy et Wagnac, Éric. 2018. « Complete disruption of posterior ligamentous complex and disruption of intervertebral disc compromises cervical spine stability in flexion ». Affiche présentée lors de la conférence : 39th SICOT Orthopaedic World Congress (Montreal, QC, Canada, Oct. 11-13, 2018).

Beauséjour, Marie-Hélène, Wagnac, Éric, Arnoux, Jean-Pierre, Mac-Thiong, Jean-Marc, Hagen, Jérémy et Petit, Yvan. 2018. « Influence of a posterior ligamentous complex injury on the mechanical condition of the spinal cord during flexion ». Affiche présentée lors de la conférence : ASIA 2018 44th Annual Scientific Meeting (Rochester, MN, USA, May 02-04, 2018).

Beer, Ferdinand P., Johnston, E. Russell, Mazurek, David F., Cornwell, Phillip J., Self, Brian P., Hénault, Alain et David, Éric. 2018. « Mécanique pour ingénieurs : Dynamique ». 3e édition. Montréal (Québec) Canada : Chenelière éducation.

Ben Fredj, Emna, Ghasemi Nanesa, Hadi, Jahazi, Mohammad et Morin, Jean-Benoit. 2018. « Influence of initial microstructure and grain size on transformation of bainite to austenite in large size forgings ». Journal of Iron and Steel Research International, vol. 25, nº 5. pp. 554-562.
Compte des citations dans Scopus : 7.

Benacchio, S., Doutres, O., Le Troter, A., Varoquaux, A., Wagnac, E., Callot, V. et Sgard, F.. 2018. « Estimation of the ear canal displacement field due to in-ear device insertion using a registration method on a human-like artificial ear ». Hearing Research, vol. 365. pp. 16-27.
Compte des citations dans Scopus : 13.

Benacchio, Simon et Doutres, Olivier. 2018. « Application of a registration method on magnetic resonance images to evaluate the displacement field of a human subject ear canal due to various earplug insertions ». Communication lors de la conférence : 175th Meeting of the Acoustical Society of America (Minneapolis, MN, USA, May 7-11, 2018).

Benariba, Aboubakeur, Bouzidane, Ahmed, Thomas, Marc et Guilbault, Raynald. 2018. « Numerical analysis of a rigid rotor mounted on four-pad hydrostatic squeeze film damper lubricated with micropolar lubricant ». Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, vol. 232, nº 5. pp. 513-524.
Compte des citations dans Scopus : 7.

Berdai, Mounia, Tahan, Antoine et Gagnon, Martin. 2018. « A comparison between aggregation before and after propagation based on a reliability model ». Information Sciences, vol. 453. pp. 99-110.
Compte des citations dans Scopus : 6.

Bernier, Antoine et Voix, Jérémie. 2018. « Advancements on an active hearing protection device for musicians ». Affiche présentée lors de la conférence : National Hearing Conservation Association (Orlando, FL, USA, Feb. 15-17, 2018).

Bernier, Antoine et Voix, Jérémie. 2018. « The ear beyond hearing: From digital earplugs to in-ear brain computer interfaces ». Communication lors de la conférence : 2018 National Hearing Conservation Association Conference (Orlando, FL, USA, Feb. 15-17, 2018).

Bertrand, Samuel, Shahriari, Davood, Jahazi, Mohammad et Champliaud, Henri. 2018. « Linear friction welding process simulation of Ti-6Al-4V alloy: a heat transfer analysis of the conditioning phase ». In 17th International Conference on Metal Forming (Metal Forming) (Toyohashi, Japan, Sept. 16-19, 2018) Coll. « Procedia Manufacturing », vol. 15. pp. 1382-1390. Netherlands : Elsevier B.V..
Compte des citations dans Scopus : 7.

Bertrand-Grenier, Antony, Zehtabi, Fatemeh, Lerouge, Sophie, Alturkistani, Husain, Kauffmann, Claude, Bodson-Clermont, Paule, Salazkin, Igor, Héon, Hélène, Cloutier, Guy et Soulez, Gilles. 2018. « Shear wave elasticity imaging for residual endoleak and thrombus characterisation after endoleak embolisation following endovascular aneurysm repair: a canine animal study ». European Radiology Experimental, vol. 2.
Compte des citations dans Scopus : 1.

Billerot, Pierre-Lou, Dufresne, Louis et Seers, Patrice. 2018. « 3D CFD modelling of a porous burner geometry ». In Combustion Institute - Canadian Section. Spring Technical Meeting (Toronto, ON, Canada, May 14-17, 2018)

Bitterlin, Matthieu, Shahriari, Davood, Lapierre-Boire, Louis-Philippe, Morin, Jean-Benoît et Jahazi, Mohammad. 2018. « Hot deformation behavior of a nickel-modified AISI 4330 steel ». ISIJ International, vol. 58, nº 9. pp. 1711-1720.
Compte des citations dans Scopus : 6.

Blancke, Olivier, Combette, Amélie, Amyot, Normand, Komljenovic, Dragan, Lévesque, Mélanie, Hudon, Claude, Tahan, Antoine et Zerhouni, Noureddine. 2018. « A predictive maintenance approach for complex equipment based on petri net failure mechanism propagation model ». Proceedings of the European Conference of the PHM Society, vol. 4, nº 1.

Blancke, Olivier, Tahan, Antoine, Komljenovic, Dragan, Amyot, Normand, Lévesque, Mélanie et Hudon, Claude. 2018. « A holistic multi-failure mode prognosis approach for complex equipment ». Reliability Engineering and System Safety, vol. 180. pp. 136-151.
Compte des citations dans Scopus : 20.

Blangy, Sylvie, Bernier, Monique, Bhiry, Najat, Jean-Pierre, Dedieu, Aenishaenslin, Cécile, Bastian, Suzanne, Chanteloup, Laine, Coxam, Véronique, Decaulne, Armelle, Gérin-Lajoie, José, Gibout, Stéphane, Haillot, Didier, Hébert-Houle, Emilie, Herrmann, Thora Martina, Joliet, Fabienne, Lamalice, Annie, Lévesque, Esther, Ravel, André et Rousse, Daniel. 2018. « OHMi-Nunavik: a multi-thematic and cross-cultural research program studying the cumulative effects of climate and socio-economic changes on Inuit communities ». Écoscience, vol. 25, nº 4. pp. 311-324.
Compte des citations dans Scopus : 3.

Boivin, Guillaume, Viens, Martin et Belanger, Pierre. 2018. « Plane wave SH0 piezoceramic transduction optimized using geometrical parameters ». Sensors, vol. 18, nº 2.
Compte des citations dans Scopus : 8.

Bonfiglio, Paolo, Pompoli, Francesco, Horoshenkov, Kirill V., Rahim, Mahmud Iskandar B. Seth A., Jaouen, Luc, Rodenas, Julia, Bécot, François-Xavier, Gourdon, Emmanuel, Jaeger, Dirk, Kursch, Volker, Tarello, Maurizio, Roozen, Nicolaas Bernardus, Glorieux, Christ, Ferrian, Fabrizio, Leroy, Pierre, Vangosa, Francesco Briatico, Dauchez, Nicolas, Foucart, Félix, Lei, Lei, Carillo, Kevin, Doutres, Olivier, Sgard, Franck, Panneton, Raymond, Verdiere, Kévin, Bertolini, Claudio, Bär, Rolf, Groby, Jean-Philippe, Geslain, Alan, Poulain, Nicolas, Rouleau, Lucie, Guinault, Alain, Ahmadi, Hamid et Forge, Charlie. 2018. « How reproducible are methods to measure the dynamic viscoelastic properties of poroelastic media? ». Journal of Sound and Vibration, vol. 428. pp. 26-43.
Compte des citations dans Scopus : 27.

Bonnet, Fabien, Nélisse, Hugues et Voix, Jeremie. 2018. « Acoustical corrections to be used for improved in-ear noise dosimetry measurements ». [Résumé d'une communication à une conférence]. The Journal of the Acoustical Society of America, vol. 143, nº 3. p. 1910.

Bonnet, Fabien, Nélisse, Hugues et Voix, Jérémie. 2018. « Effects of ear canal occlusion on hearing sensitivity: A loudness experiment ». Journal of the Acoustical Society of America, vol. 143, nº 6. pp. 3574-3582.
Compte des citations dans Scopus : 4.

Bonnet, Fabien, Nélisse, Hugues et Voix, Jérémie. 2018. « Loudness in the occluded ear canal: Are we again missing 6 dB? ». Communication lors de la conférence : National Hearing Conservation Association Annual Conference 2018 (Orlando, FL, USA, Feb. 15-17, 2018).

Bouchet, M., Gauthier, M., Maire, M., Ajji, A. et Lerouge, S.. 2018. « A predictive analytical model for compliant small-diameter vascular grafts ». Affiche présentée lors de la conférence : 34th Annual Meeting of the Canadian Biomaterials Society (Victoria, BC, Canada, May 16-19, 2018).

Bouchet, M., Gauthier, M., Maire, M., Ajji, A. et Lerouge, S.. 2018. « A simple analytical model for the development of small-diameter vascular prostheses ». Affiche présentée lors de la conférence : ISB Congress 2018 (Montreal, QC, Canada, Aug. 13-15, 2018).

Bouhelal, A., Smaili, A., Guerri, O., Bouhelal, A. et Masson, C.. 2018. « Numerical investigation of turbulent flow around a recent horizontal axis wind Turbine using low and high Reynolds models ». Journal of Applied Fluid Mechanics, vol. 11, nº 1. pp. 151-164.
Compte des citations dans Scopus : 13.

Bouhelal, Abdelhamid, Guerri, Ouahiba, Smaili, Arezki et Masson, Christian. 2018. « Contribution to the aerodynamic study of the air-sand flow around a wind turbine blade installed in desert environment of Algeria ». In 2018 International Conference on Wind Energy and Applications in Algeria (ICWEAA) (Algiers, Algeria, Nov. 6-7, 2018) Piscataway, NJ, USA : IEEE.
Compte des citations dans Scopus : 2.

Bouserhal, Rachel E., Chabot, Philippe, Sarria-Paja, Milton, Cardinal, Patrick et Voix, Jérémie. 2018. « Classification of nonverbal human produced audio events: A pilot study ». In 19th Annual Conference of the International Speech Communication (INTERSPEECH 2018) (Hyderabad, India, Sept. 02-06, 2018) pp. 1512-1516. International Speech Communication Association.
Compte des citations dans Scopus : 5.

Bouserhal, Rachel, Sarria-Paja, Milton, Cardinal, Patrick et Voix, Jérémie. 2018. « Classification of nonverbal human produced audio events: a pilot study ». Communication lors de la conférence : Workshop on machine hearing and learning (Montreal, QC, Canada, Sept. 21, 2018).

Bouzid, A., Songmene, V. et Kenné, J. P.. 2018. « Bavures d'usinage et ébavurage : Méthode de sélection des procédés et allocation optimale des machines ». In 7th International Metrology Conference – CAFMET 2018 (Marrakech, Maroc, Apr. 09-12, 2018) pp. 294-300. Comite Africain de Metrologie.

Bouzid, Abdel-Hakim et Pourreza, Mohammad. 2018. « Analytical evaluation of residual stresses in the transition zone of expanded tube-to-tubesheet joints ». In ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018) ASME.

Bouzid, Abdel-Hakim et Zhu, L.inbo. 2018. « A study of neighbouring tube expansion effect on the residual contact pressure of tube-to-tubesheet joints ». International Journal of Pressure Vessels and Piping, vol. 165. pp. 185-192.
Compte des citations dans Scopus : 16.

Brassard, D., Dubé, M. et Tavarez, J.. 2018. « Conductive nanocomposites as heating elements for resistance welding ». In 6th International Carbon Composites Conference (IC3) (Arcachon, France, June 04-06, 2018)

Brionne, Gary, Loucif, Abdelhalim, Zhang, Chunping, Lapierre-Boire, Louis-Philippe et Jahazi, Mohammad. 2018. « 3D FEM simulation of the effect of cooling rate on SDAS and macrosegregation of a high strength steel ». In 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018) Coll. « Materials Science Forum », vol. 941. pp. 2360-2364. Trans Tech Publications Ltd.
Compte des citations dans Scopus : 3.

Buddhadasa, Madhuwanthi, Lerouge, Sophie et Girard-Lauriault, Pierre-Luc. 2018. « Plasma polymer films to regulate fibrinogen adsorption: Effect of pressure and competition with human serum albumin ». Plasma Processes and Polymers, vol. 15, nº 9.
Compte des citations dans Scopus : 8.

Caggiano, Alessandra, Rimpault, Xavier, Teti, Roberto, Balazinski, Marek, Chatelain, Jean-Francois et Nele, Luigi. 2018. « Machine learning approach based on fractal analysis for optimal tool life exploitation in CFRP composite drilling for aeronautical assembly ». CIRP Annals, vol. 67, nº 1. pp. 483-486.
Compte des citations dans Scopus : 42.

Cambron, P., Masson, C., Tahan, A. et Pelletier, F.. 2018. « Control chart monitoring of wind turbine generators using the statistical inertia of a wind farm average ». Renewable Energy, vol. 116, nº B. pp. 88-98.
Compte des citations dans Scopus : 46.

Cantin, Sébastien, Morency, François et Garnier, François. 2018. « Numerical simulation of contrail ice particle growth in the near field of an aircraft engine ». In Proceedings of GPPS Forum 18 (Montreal, QC, Canada, May 07-09, 2018) Global Power and Propulsion Society.

Carillo, K., Doutres, O. et Sgard, F.. 2018. « Experimental validation of an impedance tube measurement method for assessing earplugs insertion loss ». Communication lors de la conférence : NHCA 2018 : National Hearing Conservation Association Annual Conference (Orlando, FL, USA, Feb. 15-17, 2018).

Carillo, K., Sgard, F. et Doutres, O.. 2018. « Numerical study of the broadband vibro-acoustic response of an earmuff ». Applied Acoustics, vol. 134. pp. 25-33.
Compte des citations dans Scopus : 10.

Carioli, Johan, Delnavaz, Aidin, Zednik, Ricardo J. et Voix, Jérémie. 2018. « Piezoelectric earcanal bending sensor ». IEEE Sensors Journal, vol. 18, nº 5. pp. 2060-2067.
Compte des citations dans Scopus : 10.

Castellon, J., Eesaee, M., David, E., Demarquette, N. et Fréchette, M.. 2018. « Dielectric properties of LDPE/clay nanocomposites ». In 12th International Conference on the Properties and Applications of Dielectric Materials (ICPADM) (Xi'an, China, May 20-24, 2018) pp. 49-52. Piscataway, NJ, USA : IEEE.

Chadha, K., Ahmed, Z., Aranas, C., Shahriari, D. et Jahazi, M.. 2018. « Influence of strain rate on dynamic transformation of austenite in an as-cast medium-carbon low-alloy steel ». Materialia, vol. 1. pp. 155-167.
Compte des citations dans Scopus : 13.

Champliaud, Henri, Vieillot, Valentin, Provencher, David et Lê, Ngan Van. 2018. « Rapid 3D shape forming computation with piecewise heating lines using a fifth order spline formulation ». In 30th European Modeling and Simulation Symposium (EMSS 2018) (Budapest , Hungary, Sept. 17-19, 2018) pp. 204-209. Dime University of Genoa.

Chen, Jianqiang, Demers, Vincent, Turner, Daniel P. et Bocher, Philippe. 2018. « Experimental investigation on high-cycle fatigue of inconel 625 superalloy brazed joints ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 49A, nº 4. pp. 1244-1253.
Compte des citations dans Scopus : 8.

Chuitcheu, James William, Texier, Damien et Bocher, Philippe. 13 mars 2018. « Determining Properties of Materials at High Temperatures ». [Article de recherche]. Substance ÉTS.

Chuitcheu, James William, Texier, Damien et Bocher, Philippe. 13 mars 2018. « Déterminer les propriétés des matériaux à haute température ». [Article de recherche]. Substance ÉTS.

Chuitcheu, James William, Texier, Damien et Bocher, Philippe. 4 avril 2018. « Hot Tensile Strength Micromachine for Aeronautics ». [Article de recherche]. Substance ÉTS.

Chuitcheu, James William, Texier, Damien et Bocher, Philippe. 4 avril 2018. « Une micromachine de traction à chaud pour l’aéronautique ». [Article de recherche]. Substance ÉTS.

Coria, I., Martin, I., Bouzid, A. H., Heras, I. et Abasolo, M.. 2018. « FEM superelement technique applied to oil and gas bolted flange connections ». In 24th International Conference on Fluid Sealing, March 7, 2018 - March 8, 2018 (Manchester, United kingdom, March 7-8, 2018) pp. 105-115. United kingdom : BHR Group Limited.

Coria, Ibai, Martín, Iñigo Morales, Bouzid, Abel-Hakim, Heras, Iker et Abasolo, Mikel. 2018. « Efficient assembly of bolted joints under external loads using numerical FEM ». International Journal of Mechanical Sciences, vol. 142-143. pp. 575-582.
Compte des citations dans Scopus : 24.

Coria, Ibai, Martín, Iñigo, Bouzid, Hakim, Heras, Iker et Aguirrebeitia, Josu. 2018. « Optimized bolt tightening sequences in bolted joints using superelement FE modeling technique ». In 37th International Conference on Ocean, Offshore and Arctic Engineering (Madrid, Spain, June 17-22, 2018) ASME.
Compte des citations dans Scopus : 2.

Côté, N., Dubé, M., Dano, M-L et Potvin, M-J. 2018. « Repair of thermoplastic composite structures using induction welding ». In CASI-ASTRO Conference (Québec, QC, Canada, May 15-17, 2018) Canadian Aeronautics and Space Institute.

Couderc, H., Griseri, V., David, E. et Mary, D.. 2018. « Dielectric properties of LDPE/MgO nanocomposites micro-extruded from a masterbatch ». In 2018 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP) (Cancun, Mexico, Oct. 21-24, 2018) pp. 175-178. IEEE.
Compte des citations dans Scopus : 1.

Coulon, Pierre, Chatelain, Jean-François, Dubé, Martine et Rimpault, Xavier. 2018. « Effect of curing pressure on machinability of carbon fiber composite ». In 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest, Hungary, June 25-27, 2018) Coll. « Procedia CIRP », vol. 77. pp. 307-310. Elsevier.
Compte des citations dans Scopus : 1.

Coutu, S., Nadeau, S. et Ateme-Nguema, B.. 2018. « Developing a design and implementation methodology of a lean and safe maintenance department ». Affiche numéro 280 présentée lors de la conférence : 32nd Triennial Congress of the International Commission on Occupational Health (ICOH) (Dublin, Ireland, April 29-May 4, 2018).

Crétot-Richert, Gabrielle, Viallet, Guilhem, Valentin, Olivier, Delnavaz, Aidin et Voix, Jérémie. 2018. « EARtrode : a custom-fitted in and around the ear platform for BCI applications ». Communication lors de la conférence : Lightning Talk-NeuroTechMTL Entrepreneurship Series: Applied Neuro Research (Montreal, QC, Canada, Oct. 18, 2018).

da Silveira Fleck, Alan, Couture, Caroline, Sauvé, Jean-François, Njanga, Pierre-Eric, Neesham-Grenon, Eve, Lachapelle, Guillaume, Coulombe, Hugo, Hallé, Stéphane, Aubin, Simon, Lavoué, Jérôme et Debia, Maximilien. 2018. « Diesel engine exhaust exposure in underground mines: Comparison between different surrogates of particulate exposure ». Journal of Occupational and Environmental Hygiene, vol. 15, nº 7. pp. 549-558.
Compte des citations dans Scopus : 11.

Dang, D. D., Pham, X. T., Labbe, P., Torriano, F., Morissette, J. F. et Hudon, C.. 2018. « CFD analysis of turbulent convective heat transfer in a hydro-generator rotor-stator system ». Applied Thermal Engineering, vol. 130. pp. 17-28.
Compte des citations dans Scopus : 28.

David, Eric et Andritsch, Thomas. 2018. « Dielectric Properties of Epoxy/POSS and PE/POSS Systems ». In Polymer/POSS Nanocomposites and Hybrid Materials: Preparation, Properties, Applications. Coll. « Springer Series on Polymer and Composite Materials ». pp. 233-254. Springer.

Demers, V., Fareh, F., Turenne, S., Demarquette, N. R. et Scalzo, O.. 2018. « Experimental study on moldability and segregation of Inconel 718 feedstocks used in low-pressure powder injection molding ». Advanced Powder Technology, vol. 29, nº 1. pp. 180-190.
Compte des citations dans Scopus : 20.

Dermanaki Farahani, Rouhollah et Dubé, Martine. 2018. « Printing polymer nanocomposites and composites in three dimensions ». Advanced Engineering Materials, vol. 20, nº 2.
Compte des citations dans Scopus : 51.

Dhaouadi, Tahar, Ngo, Anh Dung, Rodriguez-Uribe, Arturo, Misra, Manjusri et Mohanty, Amar K.. 2018. « Mechanical characterisation and modelling of sustainable biomaterials randomly reinforced toughened polypropylene ». In 15th International Symposium on Bioplastics, Biocomposites and Biorefining (ISBBB 2018) (Guelph, ON, Canada, July 24-27, 2018)

Diotalevi, Lucien, Petit, Yvan, Brailovski, Vladimir, Nichols, Sylvain, Marchionatti, Emma et Wagnac, Éric. 2018. « Quasi-static tensile properties of the Cranial Cruciate Ligament (CrCL) in adult cattle: towards the design of a prosthetic CrCL ». Journal of the Mechanical Behavior of Biomedical Materials, vol. 79. pp. 239-245.
Compte des citations dans Scopus : 6.

Djebara, Abdelhakim, Songmene, Victor et Bahloul, Ali. 2018. « Performance of a capillary dilution system for high concentration sampling of ultrafine aerosols ». Aerosol Science and Engineering, vol. 2, nº 2. 92–97.
Compte des citations dans Scopus : 1.

Doran, Pascal, Vlasic, Ed, Guevremont, Grant et Moustapha, Hany. 2018. « Gas-path optimization using turbine aerodynamics meanline and design exploration ». In Proceedings of GPPS Society Forum 18 (Montréal, QC, Canada, May 07-09, 2018) Global Power and Propulsion Society.

Dorsemaine, M., Petit, Y., Ménard, A.-L., Bailly, N. et Wagnac, E.. 2018. « Effet de la dégénérescence du disque sur les fractures vertébrales ». Communication lors de la conférence : 38ème journée de la recherche du POES et de la division d’orthopédie de l’Université de Montréal (Montreal, QC, Canada, 4 mai, 2018).

Doutres, Olivier, Sgard, Franck C., Benacchio, Simon, Terroir, Jonathan, Perrin, Nellie, Trompette, Nicolas, Negrini, Alessia, Gaudreau, Marc-André, Jolly, Caroline, Berry, Alain, Gauthier, Phillippe-Aubert, Padois, Thomas et Gauvin, Chantal. 2018. « Earplug comfort: From subjective assessment on the field to objective measurement and simulation using augmented artificial heads ». Communication lors de la conférence : 175th Meeting of the Acoustical Society of America (Minneapolis, MN, USA, May 7-11, 2018).

Douzi, W., Dugué, B., Vinches, L., Al Sayed, C., Hallé, S., Bosquet, L. et Dupuy, O.. 2018. « Cooling during exercise enhances aerobic and anaerobic exercise performances: Which body area should we cool? A systematic review with meta-analyses ». Communication lors de la conférence : 23rd Annual Congress of the European College of Sport Science (Dublin, Ireland, July 4-7, 2018).

Dumoulin, Romain, Tordini, Francesco, Voix, Jeremie et Cossette, Isabelle. 2018. « A hearing-care toolkit for young musicians: Combined use of a noise dose measurement app and acoustical manekin ». [Résumé d'une communication à une conférence]. The Journal of the Acoustical Society of America, vol. 144, nº 3. p. 1929.

Dupont, T., Leclaire, P., Umnova, O. et Panneton, R.. 2018. « Perforated materials with periodically distributed annular cavities for low frequency acoustic absorption ». In 47th International Congress and Exposition on Noise Control Engineering: Impact of Noise Control Engineering (Chicago, IL, USA, Aug. 26-29, 2018) Institute of Noise Control Engineering.

Dupont-Marillia, Frederic, Jahazi, Mohammad et Bélanger, Pierre. 2018. « Phased array inspection of large size forged steel parts ». In 44th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2017) (Provo, UT, USA, July 16-21, 2017) Coll. « AIP Conference Proceedings », vol. 1949. American Institute of Physics.
Compte des citations dans Scopus : 2.

Eesaee, Mostafa, David, Eric, Demarquette, Nicole R. et Fabiani, Davide. 2018. « Electrical breakdown properties of clay-based LDPE blends and nanocomposites ». Journal of Nanomaterials, vol. 2018.
Compte des citations dans Scopus : 14.

Ernez, Sami et Morency, François. 2018. « CFD study of heat transfer and ice thickness in aircraft ground deicing by ADF jets ». In 26th Annual Conference of the Computational Fluid Dynamics Society of Canada (CFD2018) (Winnipeg, MB, Canada, June 10-12, 2018)

Facchinello, Y., Wagnac, E., Ung, B., Petit, Y., Pradhan, P., Peyrache, L.-M. et Mac-Thiong, J.-M.. 2018. « The use of embedded optical fibers to assess the transient compression distribution at key locations of an instrumented spinal cord surrogate ». Communication lors de la conférence : ASIA 2018 44th Annual Scientific Meeting (Rochester, MN, USA, May 02-04, 2018).

Falardeau, Timothe et Bélanger, Pierre. 2018. « Material characterization using ultrasound tomography ». In 44th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2017) (Provo, UT, USA, July 16-21, 2017) Coll. « AIP Conference Proceedings », vol. 1949. American Institute of Physics.
Compte des citations dans Scopus : 1.

Falardeau, Timothe et Belanger, Pierre. 2018. « Ultrasound tomography in bone mimicking phantoms: Simulations and experiments ». Journal of the Acoustical Society of America, vol. 144, nº 5. pp. 2937-2946.
Compte des citations dans Scopus : 22.

Farahani, R. D., Therriault, D., Dubé, M., Bodkhe, S. et Mahdavi, M.. 2018. « Additive manufacturing of multifunctional nanocomposites and composites ». In Comprehensive Composite Materials II. 2nd ed. pp. 380-407. Elsevier.
Compte des citations dans Scopus : 2.

Filion, Alexandre, Joubair, Ahmed, Tahan, Antoine S. et Bonev, Ilian A.. 2018. « Robot calibration using a portable photogrammetry system ». Robotics and Computer-Integrated Manufacturing, vol. 49. pp. 1339-1351.
Compte des citations dans Scopus : 88.

Fort, Valentin, Bouzid, Abdel-Hakim et Gratton, Michel. 2018. « Analytical modeling of self-loosening of bolted joints ». In ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018) ASME.
Compte des citations dans Scopus : 2.

Fournely, Marion, Petit, Yvan, Wagnac, Éric, Laurin, Jérôme, Callot, Virginie et Arnoux, Pierre-Jean. 2018. « High-speed video analysis improves the accuracy of spinal cord compression measurement in a mouse contusion model ». Journal of Neuroscience Methods, vol. 293. pp. 1-5.
Compte des citations dans Scopus : 8.

Gauthier, Baptiste, Thon, Aurelien et Bélanger, Pierre. 2018. « Comparison of a piezoceramic transducer and an EMAT for the omnidirectional transduction of SH0 ». In 44th Annual Review of Progress in Quantitative Nondestructive Evaluation (QNDE 2017) (Provo, UT, USA, July 16-21, 2017) Coll. « AIP Conference Proceedings », vol. 1949. American Institute of Physics.
Compte des citations dans Scopus : 2.

Genoyer, Julie, Soulestin, Jérémie et Demarquette, Nicole R.. 2018. « Influence of the molar masses on compatibilization mechanism induced by two block copolymers in PMMA/PS blends ». Journal of Rheology, vol. 62, nº 3. pp. 681-693.
Compte des citations dans Scopus : 6.

Ghafarizadeh, S. B., Fréchette, M. F. et David, E.. 2018. « Fabrication and dielectric, mechanical, and thermal properties of Low-Density Polyethylene (LDPE) composites containing surface-passivated silicon (Si/SiO2Core/Shell Nanoparticles) ». Polymer - Plastics Technology and Engineering, vol. 57, nº 4. pp. 327-334.
Compte des citations dans Scopus : 9.

Gharagozloo, M., Pham, X-T. et Nguyen, C-C. 2018. « Feasibility study of aluminium deposition by robotic MIG welding process ». In CanWeld Conference 2018 (Winnipeg, MB, Canada, Sept. 12-13, 2018)

Gholami, E. et Demers, V.. 2018. « Molding properties of cobalt-chrome-based feedstocks used in low-pressure powder injection molding ». In Advances in Powder Metallurgy and Particulate Materials - 2018: Proceedings of the 2018 International Conference on Powder Metallurgy and Particulate Material, POWDERMET 2018 (San Antonio, TX, USA, June 17-20, 2018) pp. 253-264. Metal Powder Industries Federation.
Compte des citations dans Scopus : 2.

Gholami, Ehsan et Demers, Vincent. 2018. « Molding properties of cobalt-chrome-based feedstocks used in low-pressure powder injection molding ». International Journal of Mechanical and Production Engineering, vol. 6, nº 10. pp. 33-38.
Compte des citations dans Scopus : 2.

Grichi, Yosra, Beauregard, Yvan et Dao, Thien-My. 2018. « Optimization of obsolescence forecasting using new hybrid approach based on the RF method and the meta-heuristic genetic algorithm ». American Journal of Management, vol. 18, nº 2. pp. 27-38.

Grichi, Yosra, Dao, Thien-My et Beauregard, Yvan. 2018. « A new approach for optimal obsolescence forecasting based on the random forest (RF) technique and meta-heuristic particle swarm optimization (PSO) ». In Proceedings of the International Conference on Industrial Engineering and Operations Management (Paris, France, July 26-27, 2018) pp. 1680-1688. IOM Society International.
Compte des citations dans Scopus : 3.

Guo, Baoqi, Aranas, Clodualdo, Foul, Anes, Ji, Xiankun, Fall, Ameth, Jahazi, Mohammad et Jonas, John J.. 2018. « Effect of multipass deformation at elevated temperatures on the flow behavior and microstructural evolution in Ti-6Al-4V ». Materials Science and Engineering A, vol. 729. pp. 119-124.
Compte des citations dans Scopus : 16.

Gupta, Shreyank, Haïat, Guillaume, Laporte, Catherine et Belanger, Pierre. 2018. « Effect of acoustic impedance mismatch between skin and bone on transcranial ultrasound transmission ». Affiche présentée lors de la conférence : 176TH Meeting of the Acoustical Society of America, 2018 Acoustics Week in Canada).

Guyot, C., Samaei, S., Cerruti, M. et Lerouge, S.. 2018. « Designing a chitosan-based thermosensible hydrogel with high bioadhesive and mechanical properties, and compatible with cell therapy ». Affiche présentée lors de la conférence : Society for Biomaterials - 2018 Annual Meeting & Exposition (Atlanta, GA, USA, Apr. 11-14, 2018).

Guyot, Capucine et Lerouge, Sophie. 2018. « Can we achieve the perfect injectable scaffold for cell therapy? ». [Éditorial]. Future Science, vol. 4, nº 4.
Compte des citations dans Scopus : 13.

Habibzadeh Boukani, Hamid, Viens, Martin, Tahan, Souheil-Antoine et Gagnon, Martin. 2018. « Case study on the integrity and nondestructive inspection of flux-cored arc welded joints of Francis turbine runners ». International Journal of Advanced Manufacturing Technology, vol. 98, nº 5-8. pp. 2201-2211.
Compte des citations dans Scopus : 10.

Hammou, Mahmoud, Bouzidane, Ahmed, Thomas, Marc, Benariba, Aboubakeur et Bouzit, Mohamed. 2018. « Static and dynamic characteristics of an orifice compensated three-pad hydrostatic squeeze film damper ». Industrial Lubrication and Tribology, vol. 70, nº 6. pp. 1078-1085.
Compte des citations dans Scopus : 4.

Helal, E., Amurin, L. G., Carastan, D. J., de Sousa Jr., R. R., David, E., Fréchette, M. et Demarquette, N. R.. 2018. « Tuning the mechanical and dielectric properties of clay-containing thermoplastic elastomer nanocomposites ». Polymer Engineering and Science, vol. 58. E174-E181.
Compte des citations dans Scopus : 6.

Helal, E., Pottier, C., David, E., Fréchette, M. et Demarquette, N. R.. 2018. « Polyethylene/Thermoplastic elastomer/Zinc Oxide nanocomposites for high voltage insulation applications: Dielectric, mechanical and rheological behavior ». European Polymer Journal, nº 100. pp. 258-269.
Compte des citations dans Scopus : 49.

Hoa Ngan, Nguyen et Bocher, Philippe. 2018. « Finite element analysis simulation of the effect of induction hardening on rolling contact fatigue ». Journal of Tribology, vol. 140, nº 6.
Compte des citations dans Scopus : 9.

Hudon, C., Amyot, N., Bernier, S., David, E. et Essalihi, M.. 2018. « Comparison of DC ramp and polarization and depolarisation tests on hydrogenerators ». In 2018 IEEE Electrical Insulation Conference (EIC) (San Antonio, TX, USA, June 17-20, 2018) pp. 114-119. Piscataway, NJ, USA : IEEE.
Compte des citations dans Scopus : 1.

Hui, E., Cunningham, N., Adoungotchodo, A. et Lerouge, S.. 2018. « Characterization of chitosan-collagen thermosensitive hydrogels for cell therapy and immunotherapy ». Affiche présentée lors de la conférence : 34th Annual Meeting of the Canadian Biomaterials Society (Victoria, BC, Canada, May 16-19, 2018).

Igntowicz, Kevin et Morency, François. 31 octobre 2018. « Anticipating Risk of Ice Ingestion by Aircraft Engines ». [Article de recherche]. Substance ÉTS.

Igntowicz, Kevin et Morency, François. 31 octobre 2018. « Anticiper les risques d’ingestion de glace par les moteurs d’avion ». [Article de recherche]. Substance ÉTS.

Ijaz, M. F., Zhukova, Y., Konopatsky, A., Dubinskiy, S., Korobkova, A., Pustov, Y., Brailovski, V. et Prokoshkin, S.. 2018. « Effect of Ta addition on the electrochemical behavior and functional fatigue life of metastable Ti-Zr-Nb based alloy for indwelling implant applications ». Journal of Alloys and Compounds, vol. 748. pp. 51-56.
Compte des citations dans Scopus : 15.

Il, Alexandre, Chatelain, Jean-François, Lalonde, Jean-François, Balazinski, Marek et Rimpault, Xavier. 2018. « An experimental investigation of the influence of cutting parameters on workpiece internal temperature during Al2024-T3 milling ». International Journal of Advanced Manufacturing Technology, vol. 97, nº 1-4. pp. 413-426.
Compte des citations dans Scopus : 10.

Javadi, Hamid, Jomaa, Walid, Dalgaard, Elvi, Brochu, Myriam et Bocher, Philippe. 2018. « Influence of surface residual stresses on the fatigue life and crack propagation behavior of turned Inconel 718 super-alloy ». In 12th International Fatigue Congress (FATIGUE 2018) (Poitiers, France, May 27-June 1, 2018) Coll. « MATEC Web of Conferences », vol. 165. EDP Sciences.
Compte des citations dans Scopus : 7.

Jbira, Ibtissem, Tahan, Antoine, Mahjoub, Mohammed Ali et Louhichi, Borhen. 2018. « Evaluation of the algorithmic error of new specification tools for an ISO 14405-1:2016 size ». In ASME 2018 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (Québec, QC, Canada, Aug. 26-29, 2018)
Compte des citations dans Scopus : 2.

Jetté, Bruno, Brailovski, Vladimir, Dumas, Mathieu, Simoneau, Charles et Terriault, Patrick. 2018. « Femoral stem incorporating a diamond cubic lattice structure: Design, manufacture and testing ». Journal of the Mechanical Behavior of Biomedical Materials, vol. 77. pp. 58-72.
Compte des citations dans Scopus : 78.

Jetté, Bruno, Brailovski, Vladimir, Simoneau, Charles, Dumas, Mathieu et Terriault, Patrick. 2018. « Development and in vitro validation of a simplified numerical model for the design of a biomimetic femoral stem ». Journal of the Mechanical Behavior of Biomedical Materials, vol. 77. pp. 539-550.
Compte des citations dans Scopus : 43.

Kanthabhabha Jeya, Rahul Palaniappan et Bouzid, Abdel-Hakim. 2018. « Influence of thermal ratcheting on the creep and mechanical properties of High Density Polyethylene (HDPE) ». In ASME 2018 International Mechanical Engineering Congress and Exposition (Pittsburgh, PA, USA, Nov. 9-15, 2018) ASME.

Kanthabhabha Jeya, Rahul et Bouzid, Abdel-Hakim. 2018. « Compression creep and thermal ratcheting behavior of High Density Polyethylene (HDPE) ». Polymers, vol. 10, nº 2.
Compte des citations dans Scopus : 18.

Karabibene, N., Chatelain, J-F., Beauchamp, Y. et Lebrun, G.. 2018. « Effect of machining parameters on the quality of a flax fiber reinforced polymer composite ». In International Conference on Industry, Engineering, and Management Systems (IEMS 2018) (Cocoa Beach, FL, USA, Mar. 19-21, 2018)

Karabibene, N., Chatelain, J-F., Beauchamp, Y. et Lebrun, G.. 2018. « Effect of machining parameters on the uncut fibers of a unidirectional flax fiber reinforced composite ». Journal of Management and Engineering Integration, vol. 11, nº 1.

Kazeminia, Mehdi et Bouzid, Abdel-Hakim. 2018. « Leak prediction through porous compressed packing rings: A comparison study ». International Journal of Pressure Vessels and Piping, vol. 166. pp. 1-8.
Compte des citations dans Scopus : 11.

Kedadouche, Mourad, Liu, Zhaoheng et Thomas, Marc. 2018. « Bearing fault feature extraction using autoregressive coefficients, linear discriminant analysis and support vector machine under variable operating conditions ». In Advances in Condition Monitoring of Machinery in Non-Stationary Operations : Proceedings of the 5th International Conference on Condition Monitoring of Machinery in Non-stationary Operations, CMMNO’2016, 12–16 September 2016, Gliwice, Poland (Gliwice, Poland, Sept. 12-16, 2016) Coll. « Applied Condition Monitoring », vol. 9. pp. 339-352. Springer.
Compte des citations dans Scopus : 6.

Kedadouche, Mourad, Liu, Zhaoheng et Thomas, Marc. 2018. « Bearing fault feature extraction using autoregressive coefficients, linear discriminant analysis and support vector machine under variable operating conditions ». In Advances in Condition Monitoring of Machinery in Non-Stationary Operations. Coll. « Applied Condition Monitoring », vol. 9. pp. 339-352. Springer.
Compte des citations dans Scopus : 6.

Kedadouche, Mourad, Yulan, Sun, Liu, Zhaoheng, Thomas, Marc, Charland-Arcand, Guillaume et Beck, Adrien. 2018. « Design of a vibration isolator for the inertial navigation system of an autopilot dedicated to the operation of light drones ». In 2018 9th International Conference on Mechanical and Aerospace Engineering (ICMAE) (Budapest, Hungary, Jul. 10-13, 2018) pp. 73-78. IEEE.
Compte des citations dans Scopus : 3.

Khay, M., Ngo, A. D. et Ganesan, R.. 2018. « Experimental investigation and phenomenological modeling of hygrothermal effect on tensile fatigue behavior of carbon/epoxy plain weave laminates ». Journal of Composite Materials, vol. 52, nº 27. pp. 3803-3818.
Compte des citations dans Scopus : 3.

Khodaei, Hamid et Terriault, Patrick. 2018. « Experimental validation of shape memory material model implemented in commercial finite element software under multiaxial loading ». Journal of Intelligent Material Systems and Structures, vol. 29, nº 14. pp. 2954-2965.
Compte des citations dans Scopus : 4.

Kibouka, Guy Richard, Nganga-Kouya, Donatien, Kenné, Jean-Pierre, Polotski, Vladimir et Songmene, Victor. 2018. « Maintenance and setup planning in manufacturing systems under uncertainties ». Journal of Quality in Maintenance Engineering, vol. 24, nº 2. pp. 170-184.
Compte des citations dans Scopus : 8.

Klotz, T., Delbergue, D., Bocher, P., Levesque, M. et Brochu, M.. 2018. « Surface characteristics and fatigue behavior of shot peened Inconel 718 ». International Journal of Fatigue, vol. 110. pp. 10-21.
Compte des citations dans Scopus : 130.

Kolobova, A. Yu, Ryklina, E. P., Prokoshkin, S. D., Inaekyan, K. E. et Brailovskii, V.. 2018. « Study of the evolution of the structure and kinetics of martensitic transformations in a titanium nickelide upon isothermal annealing after hot helical rolling ». Physics of Metals and Metallography, vol. 119, nº 2. pp. 134-145.
Compte des citations dans Scopus : 15.

Kreitcberg, A., Brailovski, V. et Prokoshkin, S.. 2018. « New biocompatible near-beta Ti-Zr-Nb alloy processed by laser powder bed fusion: Process optimization ». Journal of Materials Processing Technology, vol. 252. pp. 821-829.
Compte des citations dans Scopus : 41.

Kuate-Togue, H., Chatelain, J-F. et Ouellet-Plamondon, C.. 2018. « Effect of additives on cutting temperature of glass fibers reinforced polymers ». In Proceedings of The Canadian Society for Mechanical Engineering International Congress (CSME) (Toronto, ON, Canada, May 27-30, 2018) CSME.

Kuester, Scheyla, Barra, Guilherme M. O. et Demarquette, Nicole R.. 2018. « Morphology, mechanical properties and electromagnetic shielding effectiveness of poly(styrene-b-ethylene-ran-butylene-b-styrene)/carbon nanotube nanocomposites: effects of maleic anhydride, carbon nanotube loading and processing method ». Polymer International, vol. 67, nº 9. pp. 1229-1240.
Compte des citations dans Scopus : 11.

Kurusu, R., Helal, E., Demarquette, N., David, E. et Moghimian, N.. 2018. « Electrical properties of EVA/LLDPE blends with selectively located graphene nanoplatelets ». In IEEE 2nd International Conference on Dielectrics (Budapest, Hungary, July 1-5, 2018) New York : IEEE.
Compte des citations dans Scopus : 3.

Kurusu, Rafael S., Helal, Emna, Moghimian, Nima, David, Eric et Demarquette, Nicole. 2018. « The role of selectively located commercial graphene nanoplatelets in the electrical properties, morphology, and stability of EVA/LLDPE blends ». Macromolecular Materials and Engineering, vol. 303, nº 9.
Compte des citations dans Scopus : 24.

Lalonde, Sébastien, Guilbault, Raynald et Langlois, Sébastien. 2018. « Numerical analysis of ACSR conductor-clamp systems undergoing wind-induced cyclic loads ». IEEE Transactions on Power Delivery, vol. 33, nº 4. pp. 1518-1526.
Compte des citations dans Scopus : 31.

Lamarche, Louis. 2018. « Développements récents sur la modélisation des échangeurs géothermiques horizontaux ». Affiche numéro 63 présentée lors de la conférence : Congrès Annuel de la Société Française de Thermique (SFT) (Pau, France, 29 mai-1er juin 2018).

Lamarche, Louis, Raymond, Jasmin et Koubikana Pambou, Claude. 2018. « Evaluation of the internal and borehole resistances during thermal response tests and impact on ground heat exchanger design ». Energies, vol. 11, nº 1. p. 38.
Compte des citations dans Scopus : 16.

Landau, Kurt, Nadeau, Sylvie, Le Floch, Tiphaine et Morency, François. 2018. « Arbeitsprozesse und Wertschöpfungsbeiträge bei der Flugzeug-Enteisung ». In Gesellschaft für Arbeitswissenschaft (Francfort, Allemagne, Fev. 21-23, 2018) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 64. GFA Press.

Landau, Kurt, Nadeau, Sylvie et LeFloch, Tiphaine. 2018. « Development of the Ergonomic Activity Sampling (EAS) method to analyse video-documented work processes with activity sampling ». Ergonomics International Journal, vol. 2, nº 7.

Lapalme, Denis, Halter, Fabien, Mounaim-Rousselle, Christine et Seers, Patrice. 2018. « Characterization of thermodiffusive and hydrodynamic mechanisms on the cellular instability of syngas fuel blended with CH4 or CO2 ». Combustion and Flame, vol. 193. pp. 481-490.
Compte des citations dans Scopus : 32.

Le Corre, G., Lemaire, R. et Assoukpe, P.A.C.. 2018. « Determination of the sooting propensity of a wide range of functional groups by means of a structural group contribution approach applied to coupled TSI, OESI and YSI indexes ». In Proceedings of the Combustion Institute, Canadian Section - 2018 Spring Technical Meeting (Toronto, ON, Canada, May 14-17, 2018)

Le Floc'h, Arnaud S., Mohammed-Taifour, Abdelouahab T., Dufresne, Louis et Weiss, Julien. 2018. « Spanwise aspects of unsteadiness in a pressure-induced turbulent separation bubble ». In 48th AIAA Fluid Dynamics Conference, 2018 (Atlanta, GA, USA, June 25-28, 2018) Coll. « AIAA Paper », vol. AIAA 208-3538. American Institute of Aeronautics and Astronautics.
Compte des citations dans Scopus : 3.

Le Floch, Tiphaine, Nadeau, Sylvie, Landau, Kurt et Morency, François. 2018. « Aircraft deicing in open baskets: Study of the effects of activities on heart rate variability ». In Gesellschaft für Arbeitswissenschaft (Francfort, Allemagne, Fev. 21-23, 2018) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 64. GFA Press.

Le, Phuoc Luong, Elmughrabi, Walid, Dao, Thien My et Chabaane, Amin. 2018. « Decision-making in construction logistics and supply chain management: Evolution and future directions ». In 7th International Conference on Information Systems, Logistics and Supply Chain (ILS 2018) (Lyon, France, July 08-11, 2018) pp. 646-655. INSA Lyon.
Compte des citations dans Scopus : 7.

Léger, Jérémie, Rousse, Daniel R., Le Borgne, Kilian et Lassue, Stéphane. 2018. « Comparing electric heating systems at equal thermal comfort: An experimental investigation ». Building and Environment, vol. 128. pp. 161-169.
Compte des citations dans Scopus : 14.

Lemonnier, D., Mac-Thiong, J. M. et Bélanger, P.. 2018. « Ultrasound plane wave doppler quantification using a wall-less spinal cord representative phantom ». Acta Acustica united with Acustica, vol. 104, nº 1. pp. 166-173.
Compte des citations dans Scopus : 2.

Lerouge, S., Monette, A., Ceccaldi, C., Cunnigham, N. et Lapointe, R.. 2018. « Injectable T cell delivery scaffolds for cancer immunotherapy ». Affiche présentée lors de la conférence : ISCT 24th Annual Scientific Meeting (Montreal, QC, Canada, May 02-05, 2018).

Lerouge, Sophie. 2018. « Embolizing gels for cell and drug delivery for cancer therapy: a biomaterial perspective on the future of interventional oncology ». Communication lors de la conférence : Congrès FIRE 2018 (Marseille, France, Nov. 15-16, 2018).

Leroux, Tony, Laroche, Chantal, Giguère, Christian et Voix, Jérémie. 2018. « Hearing Aid Use in Noisy Workplaces ». Coll. « Studies and Research Projects », vol. R-1015. Montréal : Institut de recherche Robert-Sauvé en santé et en sécurité du travail. 97 p.

Letenneur, M., Brailovski, V., Moravej, M. et Aguirre, L.. 2018. « Porosity evaluation in compacted and sintered parts using the micro-tomography and metallography techniques ». In Proceedings of the International Conference on Powder Metallurgy and Particulate Material (POWDERMET) (San Antonio, TX, USA, June 17-20, 2018) Coll. « Advances in Powder Metallurgy and Particulate Materials » pp. 835-844. Metal Powder Industries Federation.
Compte des citations dans Scopus : 1.

Li, Wenchao, Vu, Viet-Hung, Liu, Zhaoheng, Thomas, Marc et Hazel, Bruce. 2018. « Extraction of modal parameters for identification of time-varying systems using data-driven stochastic subspace identification ». Journal of Vibration and Control, vol. 24, nº 20. pp. 4781-4796.
Compte des citations dans Scopus : 22.

Liu, Heli, Liu, Huaiju, Bocher, Philippe, Zhu, Caichao et Sun, Zhangdong. 2018. « Effects of case hardening properties on the contact fatigue of a wind turbine gear pair ». International Journal of Mechanical Sciences, vol. 141. pp. 520-527.
Compte des citations dans Scopus : 46.

Liu, Zhaoheng, Chung, Kwok-wai et Wang, Wei. 2018. « A perturbed nonlinear model of an articulated vehicle with driver control ». Chaotic Modeling and Simulation, nº 3. pp. 295-304.

Lizotte-Latendresse, Simon et Beauregard, Yvan. 2018. « Implementing self-service business analytics supporting lean manufacturing: A state-of-the-art review ». [Article de conférence]. IFAC-PapersOnLine, vol. 51, nº 11. pp. 1143-1148.
Compte des citations dans Scopus : 5.

Loucif, Abdelhalim, Ben Fredj, Emna, Harris, Nathan, Shahriari, Davood, Jahazi, Mohammad et Lapierre-Boire, Louis-Philippe. 2018. « Evolution of A-type macrosegregation in large size steel ingot after multistep forging and heat treatment ». Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, vol. 49, nº 3. pp. 1046-1055.
Compte des citations dans Scopus : 14.

Loucif, Abdelhalim, Bitterlin, Matthieu, Jahazi, Mohammad, Tremblay, Rami, Morin, Jean-Benoît et Lapierre-Boire, Louis-Philippe. 2018. « Determination of the root causes for cracking in a large-size cast ingot of AISI 4317 steel using microstructural analysis ». Metallography, Microstructure, and Analysis, vol. 7, nº 2. pp. 203-208.
Compte des citations dans Scopus : 2.

Loucif, Abdelhalim, Shahriari, Davood, Chadha, Kanwal, Zhang, Chunping, Jahazi, Mohammad, Tremblay, Rami et Lapierre-Boire, Louis-Philippe. 2018. « Cracking and failure in a high strength low alloy steel during solidification ». In 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018) Coll. « Materials Science Forum », vol. 941. pp. 15-20. Trans Tech Publications Ltd.
Compte des citations dans Scopus : 1.

Loucif, Abdelhalim, Touazine, Heithem et Jahazi, Mohammad. 2018. « Prediction of steel transformation temperatures using thermodynamic modeling and design of experiments (DOE) ». In 10th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Paris, France, July 09-13, 2018) Coll. « Materials Science Forum », vol. 941. pp. 2284-2289. Trans Tech Publications Ltd.
Compte des citations dans Scopus : 1.

Lyassami, Mountadar, Shahriari, Davood, Ben Fredj, Emna, Morin, Jean-Benoit et Jahazi, Mohammad. 2018. « Numerical simulation of water quenching of large size steel forgings: Effects of macrosegregation and grain size on phase distribution ». Journal of Manufacturing and Materials Processing, vol. 2, nº 2.
Compte des citations dans Scopus : 14.

Ma, Lingyue, Dugnani, Roberto et Zednik, Ricardo. 2018. « Quantifying the accuracy of fractographic strength estimates in silicate glasses ». Journal of the European Ceramic Society, vol. 38, nº 10. pp. 3643-3649.
Compte des citations dans Scopus : 8.

Majidi, Omid, Jahazi, Mohammad et Bombardier, Nicolas. 2018. « Characterization of mechanical properties and formability of a superplastic Al-Mg alloy ». In NUMISHEET 2018: 11th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (Tokyo, Japan, July 30-Aug. 6, 2018) Coll. « Journal of Physics: Conference Series », vol. 1063. IOP Publishing.
Compte des citations dans Scopus : 3.

Majidi, Omid, Jahazi, Mohammad et Bombardier, Nicolas. 2018. « Finite element simulation of high-speed blow forming of an automotive component ». Metals, vol. 8, nº 11.
Compte des citations dans Scopus : 10.

Marani, Mohsen, Songmene, Victor, Kouam, Jules et Zedan, Yasser. 2018. « Experimental investigation on microstructure, mechanical properties and dust emission when milling Al-20Mg 2Si-2Cu metal matrix composite with modifier elements ». International Journal of Advanced Manufacturing Technology, vol. 99, nº 1-4. pp. 789-802.
Compte des citations dans Scopus : 11.

Marani, Mohsen, Songmene, Victor, Kouam, Jules et Zedan, Yasser. 2018. « Valuation of the effect of barium on surface roughness and ultrafine particle emission while dry milling Al-20Mg2Si metal matrix composite ». In 2018 6th International Conference on Mechanical, Automotive and Materials Engineering (CMAME) (Hong Kong, China, Aug. 10-12, 2018) Piscataway, NJ, USA : IEEE.

Marani-Barzani, Mohsen et Songmene, Victor. 2018. « Machinability and mechanical properties of Al-Mg2Si in-situ composite with bismuth or barium ». Affiche présentée lors de la conférence : REGAL student's day).

Marchand, G., Lavoie, J., Cloutier, Y. et Hallé, S.. 2018. « Occupational exposure of embalmers to bioaerosols ». Communication lors de la conférence : International Congress on Aerobiology (Parma, Italy, Sept. 3-7, 2018).

Martin, Alexis et Voix, Jérémie. 2018. « In-ear audio wearable: Measurement of heart and breathing rates for health and safety monitoring ». IEEE Transactions on Biomedical Engineering, vol. 65, nº 6. pp. 1256-1263.
Compte des citations dans Scopus : 59.

Masoumi Khalilabad, Mahdi, Zedan, Yasser, Texier, Damien, Jahazi, Mohammad et Bocher, Philippe. 2018. « Effect of tool geometry and welding speed on mechanical properties of dissimilar AA2198–AA2024 FSWed joint ». Journal of Manufacturing Processes, vol. 34, part A. pp. 86-95.
Compte des citations dans Scopus : 42.

Masoumi, F., Thebaud, L., Shahriari, D., Jahazi, M., Cormier, J., Devaux, A. et Flipo, B. C. D.. 2018. « High temperature creep properties of a linear friction welded newly developed wrought Ni-based superalloy ». Materials Science and Engineering A, vol. 710. pp. 214-226.
Compte des citations dans Scopus : 12.

Mebarki, Fouzia et David, Eric. 2018. « Dielectric characterization of thermally aged recycled Polyethylene Terephthalate and Polyethylene Naphthalate reinforced with inorganic fillers ». Polymer Engineering and Science, vol. 58, nº 5. pp. 701-712.
Compte des citations dans Scopus : 9.

Menage, Delphine, Lemaire, Romain et Seers, Patrice. 2018. « Experimental study and chemical reactor network modeling of the high heating rate devolatilization and oxidation of pulverized bituminous coals under air, oxygen-enriched combustion (OEC) and oxy-fuel combustion (OFC) ». Fuel Processing Technology, vol. 177. pp. 179-193.
Compte des citations dans Scopus : 12.

Meziani, Salim, Zarour, Djamal et Thomas, Marc. 2018. « Experimental studies for bearings degradation monitoring at an early stage using analysis of variance ». Diagnostyka, vol. 19, nº 4. pp. 81-87.
Compte des citations dans Scopus : 1.

Mohafida, Abdelmoula, Ourasseb, Amine Ait, Kenné, Jean-Pierre et Benjellounb, Khalid. 2018. « Production and corrective maintenance control of a manufacturing system subject to imperfect repairs ». International Journal of Trend in Research and Development, nº Special issue. pp. 43-48.

Mohammadian, Neda, Turenne, Sylvain et Brailovski, Vladimir. 2018. « Surface finish control of additively-manufactured Inconel 625 components using combined chemical-abrasive flow polishing ». Journal of Materials Processing Technology, vol. 252. pp. 728-738.
Compte des citations dans Scopus : 105.

Morency, François et Beaugendre, Héloïse. 2018. « Parametric studies of flat plate trajectories using VIC and penalization ». Modelling and Simulation in Engineering, vol. 2018.

Moret, Maxime, Garnier, François, Phutthavong, Patricia et Moustapha, Hany. 2018. « Automation of a turbine tip clearance preliminary calculation process ». In Proceedings of GPPS Society Forum 18 (Montréal, QC, Canada, May 07-09, 2018) Global Power and Propulsion Society.

Mostafa, Ahmad, Shahriari, Davood, Rubio, Ignacio Picazo, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun. 2018. « Hot compression behavior and microstructure of selectively laser-melted IN718 alloy ». International Journal of Advanced Manufacturing Technology, vol. 96, nº 1-4. pp. 371-385.
Compte des citations dans Scopus : 37.

Moulins, A., Grosse, G., Esteves, A., Dugnani, R. et Zednik, R.. 2018. « Determining stresses in silicon-based microdevices using fractography ». Affiche présentée lors de la conférence : Nanomaterials for Devices (Montreal, QC, Canada, Sept. 10-12, 2018).

Nadeau, S.. 2018. « Towards lean, six sigma, and lean six sigma OHS impacts in universities ». Affiche numéro 26 présentée lors de la conférence : 32nd Triennial Congress of the International Commission on Occupational Health (ICOH) (Dublin, Ireland, April 29-May 4, 2018).

Nadeau, S. et Landau, K.. 2018. « Utility, advantages and challenges of digital technologies in the manufacturing sector ». Ergonomics International Journal, vol. 2, nº 12.

Nadon, Vincent et Voix, Jérémie. 2018. « Continuous monitoring of otoacoustic emissions : a tool to prevent hearing loss ». Communication lors de la conférence : National Hearing Conservation Association Annual Conference 2018 (Orlando, FL, USA, Feb. 15-17, 2018).

Napon, Frank et Nadeau, Sylvie. 2018. « Vers une intégration des risques opérationnels, de santé et de sécurité du travail en milieu universitaire ». In Canada International Conference on Education (CICE) (Toronto, ON, Canada, June 25-28, 2018) pp. 269-273. Infonomics Society.

Nassar, M., Guizani, L., Nollet, M. -J. et Tahan, A.. 2018. « Approche probabiliste pour évaluer la fiabilité des ponts isolés à la base, sous l’effet simultané des séismes et de la température en régions froides ». In 25e Colloque sur la progression de la recherche québécoise sur les ouvrages d’art (Montréal, QC, Canada, 8-9 mai 2018)

Nassar, Mohamad, Guizani, Lotfi, Nollet, Marie-José et Tahan, Antoine. 2018. « A probabilistic approach to assess seismic base-isolated bridges reliability in cold climate ». In 11th National Conference on Earthquake Engineering 2018: Integrating Science, Engineering, and Policy (NCEE) (Los Angeles, CA, USA, June 25-29, 2018) pp. 2773-2777. Earthquake Engineering Research Institute.

Nathan, J., Masson, C. et Dufresne, L.. 2018. « Optimal distribution width for ALM in LES for (NEW) MEXICO experiment ». In The Science of Making Torque from Wind (TORQUE 2018) (Milan, Italy, June 20-22, 2018) Coll. « Journal of Physics: Conference Series », vol. 1037. 072026.
Compte des citations dans Scopus : 2.

Nathan, Jörn, Masson, Christian et Dufresne, Louis. 2018. « Near-wake analysis of actuator line method immersed in turbulent flow using large-eddy simulations ». Wind Energy Science, vol. 3, nº 2. pp. 905-917.
Compte des citations dans Scopus : 9.

Nazemi, Faranak, Hamel-Akré, Johann et Bocher, Philippe. 2018. « Modeling of cementite coarsening during tempering of low-alloyed-medium carbon steel ». Journal of Materials Science, vol. 53, nº 8. pp. 6198-6218.
Compte des citations dans Scopus : 10.

Nemchi, Amina, Bouzidane, Ahmed, Thomas, Marc et Abed, Asma. 2018. « Performance analysis of four-pad hydrostatic squeeze film dampers loaded between pads under laminar and turbulent flow conditions ». Tribology - Materials, Surfaces and Interfaces, vol. 12, nº 2. pp. 59-70.
Compte des citations dans Scopus : 6.

Ngo, Anh Dung, Khay, Mohamed et Deluy, Marc-Claudel. 2018. « Experimental investigation of operational conditions effects on axial fatigue behaviour of carbonepoxy plain wave laminates containing atificial flaw ». Communication lors de la conférence : 2018 9th International Conference on Mechanical and Aerospace Engineering (ICMAE) (Budapest, Hungary, July 10-13, 2018).

Ngô, V., Nadeau, S. et Hallé, S.. 2018. « Usability testing for ergonomic criteria matrix: case study of a deep cooling vest ». Communication lors de la conférence : 32nd Triennial Congress of the International Commission on Occupational Health (ICOH) (Dublin, Ireland, April 29-May 4, 2018).

Nguyen, H.-C., Pham, X-T. et Jahazi, M.. 2018. « Implementing phase-field ductile fracture model for aluminum welded joint ». Affiche présentée lors de la conférence : REGAL student’s day (Montreal, QC, Canada, June 18-19, 2018).

Nguyen, Hoan Huy, Champliaud, Henri et Lê, Van Ngan. 2018. « Dynamic finite element modeling of metal spinning process with a stationary mandrel and a rotating tool ». In 30th European Modeling and Simulation Symposium (EMSS 2018) (Budapest , Hungary, Sept. 17-19, 2018) pp. 91-96. Dime University of Genoa.
Compte des citations dans Scopus : 2.

Nguyen, Thi Hong Dang et Dao, Thien-My. 2018. « New framework to optimise leagile supply chain design ». In Proceedings of the International Conference on Industrial Engineering and Operations Management (Paris, France, July 26-27, 2018) IEOM Society International.

Nguyen, Thi Hong Dang et Dao, Thien-My. 2018. « New framework to optimise leagile supply chain design ». In 13th International Congress on Logistics and SCM Systems (ICLS 2018) (Ho Chi Minh City, Vietnam, July 29-Aug. 01, 2018) pp. 328-336.

Nguyen-Tri, Phuong, Tuduri, Ludovic, Gauvin, Chantal, Triki, Ennouri et Vu-Khanh, Toan. 2018. « Swelling behavior of polymeric membranes to metalworking fluids ». Journal of Applied Polymer Science, vol. 135, nº 3.
Compte des citations dans Scopus : 6.

Niknam, Seyed Ali, Davoodi, Behnam, Davim, J. Paulo et Songmene, Victor. 2018. « Mechanical deburring and edge-finishing processes for aluminum partsa review ». International Journal of Advanced Manufacturing Technology, vol. 95, nº 1-4. pp. 1101-1125.
Compte des citations dans Scopus : 36.

Niknam, Seyed Ali, Kouam, Jules, Songmene, Victor et Balazinski, Marek. 2018. « Dry and semi-dry turning of titanium metal matrix composites (Ti-MMCs) ». In 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest , Hungary, June 25-27, 2018) Coll. « Procedia CIRP », vol. 77. pp. 62-65. Elsevier.
Compte des citations dans Scopus : 14.

Nisol, Bernard, Watson, Sean, Meunier, Anne, Juncker, David, Lerouge, Sophie et Wertheimer, Michael R.. 2018. « Energetics of reactions in a dielectric barrier discharge with argon carrier gas: VI PEG‐like coatings ». Plasma Processes and Polymers, vol. 15, nº 3.
Compte des citations dans Scopus : 10.

Novelli, M., Bocher, P. et Grosdidier, T.. 2018. « Effect of cryogenic temperatures and processing parameters on gradient-structure of a stainless steel treated by ultrasonic surface mechanical attrition treatment ». Materials Characterization, vol. 139. pp. 197-207.
Compte des citations dans Scopus : 36.

Olivares-Espinosa, Hugo, Breton, Simon-Philippe, Nilsson, Karl, Masson, Christian, Dufresne, Louis et Ivanell, Stefan. 2018. « Assessment of turbulence modelling in the wake of an actuator disk with a decaying turbulence inflow ». Applied Sciences, vol. 8, nº 9.
Compte des citations dans Scopus : 5.

Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali. 2018. « Joint production and replacement planning for an unreliable manufacturing system subject to random demand and quality ». [Article de conférence]. IFAC-PapersOnLine, vol. 51, nº 11. pp. 951-956.
Compte des citations dans Scopus : 4.

Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali. 2018. « Production and replacement policies for a deteriorating manufacturing system under random demand and quality ». European Journal of Operational Research, vol. 264, nº 2. pp. 623-636.
Compte des citations dans Scopus : 36.

Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali. 2018. « Stochastic optimal control of random quality deteriorating hybrid manufacturing/remanufacturing systems ». Journal of Manufacturing Systems, vol. 49. pp. 172-185.
Compte des citations dans Scopus : 26.

Pantoja, Francisco G., Songmene, Victor, Kenné, Jean-Pierre, Olufayo, Oluwole A. et Ayomoh, Michael. 2018. « Development of a tool cost optimization model for stochastic demand of machined products ». Applied Mathematics, vol. 9, nº 12. pp. 1395-1423.

Paradis, Pierre-Luc, Rousse, Daniel R., Lamarche, Louis et Nesreddine, H.. 2018. « A numerical comparison of solar evaporators: Thermal, photovoltaic and hybrid PV/T absorber plates ». In Proceedings of the 16th International Heat Transfer Conference (IHTC 16) (Beijing, China, Aug. 10-15, 2018) pp. 7355-7362. Bergell House.

Paradis, Pierre-Luc, Rousse, Daniel R., Lamarche, Louis et Nesreddine, H.. 2018. « Un évaporateur PV/T hybride au CO2 : une étude expérimentale ». Affiche numéro 112 présentée lors de la conférence : Congrès Annuel de la Société Française de Thermique (SFT) (Pau, France, 29 mai-1er juin 2018).

Paradis, Pierre-Luc, Rousse, Daniel R., Lamarche, Louis et Nesreddine, H.. 2018. « Un évaporateur PV/T hybride au CO2 : une étude numérique ». Affiche numéro 108 présentée lors de la conférence : Congrès Annuel de la Société Française de Thermique (SFT) (Pau, France, 29 mai-1er juin 2018).

Paradis, Pierre-Luc, Rousse, Daniel R., Lamarche, Louis et Nesreddine, Hakim. 2018. « A hybrid PV/T solar evaporator using CO2: Numerical heat transfer model and simulation results ». Solar Energy, vol. 170. pp. 1118-1129.
Compte des citations dans Scopus : 24.

Paradis, Pierre-Luc, Rousse, Daniel R., Lamarche, Louis et Nesreddine, Hakim. 12 novembre 2018. « Improving Heat Pump Performance with Solar Energy ». [Article de recherche]. Substance ÉTS.

Paradis, Pierre-Luc, Rousse, Daniel R., Lamarche, Louis et Nesreddine, Hakim. 12 novembre 2018. « L’énergie solaire pour améliorer les performances des pompes à chaleur ». [Article de recherche]. Substance ÉTS.

Paradis, Pierre-Luc, Rousse, Daniel R., Lamarche, Louis, Nesreddine, Hakim et Talbot, Marie-Hélène. 2018. « One-dimensional model of a stratified thermal storage tank with supercritical coiled heat exchanger ». Applied Thermal Engineering, vol. 134. pp. 379-395.
Compte des citations dans Scopus : 12.

Piché, Paul, Gibout, Stéphane, Haillot, Didier, Arrabie, Cédric, Lamalice, Annie, Rousse, Daniel et Py, Xavier. 2018. « Modélisation thermique d’une serre en milieu circumpolaire : étude initiale ». In 26e congrès de la Société française de thermique (SFT 2018) (Pau, France, 29 mai-1er juin 2018) pp. 919-926.

Polotski, Vladimir et Beauregard, Yvan. 2018. « Work-time identification and effort assessment: Application to fenestration industry and case study? ». [Article de conférence]. IFAC-PapersOnLine, vol. 51, nº 15. pp. 569-574.
Compte des citations dans Scopus : 4.

Poulin, J. R., Brailovski, V. et Terriault, P.. 2018. « Long fatigue crack propagation behavior of Inconel 625 processed by laser powder bed fusion: Influence of build orientation and post-processing conditions ». International Journal of Fatigue, vol. 116. pp. 634-647.
Compte des citations dans Scopus : 54.

Rezabeigi, Ehsan, Wood-Adams, Paula M. et Demarquette, Nicole R.. 2018. « Complex morphology formation in electrospinning of binary and ternary poly(lactic acid) solutions ». Macromolecules, vol. 51, nº 11. pp. 4094-4107.
Compte des citations dans Scopus : 36.

Rimpault, X., Chatelain, J-F. et Balazinski, M.. 2018. « Fractal analysis applications for improving monitoring and prediction systems in machining ». In 7th International Conference on Virtual Machining Process Technology (VMPT 2018) (Hamilton, ON, Canada, May 07-09, 2018)

Rimpault, Xavier, Balazinski, Marek et Chatelain, Jean-François. 2018. « Fractal analysis application outlook for improving process monitoring and machine maintenance in manufacturing 4.0 ». Journal of Manufacturing and Materials Processing, vol. 2, nº 3.
Compte des citations dans Scopus : 9.

Rimpault, Xavier, Il, Alexandre, Chatelain, Jean-François, Lalonde, Jean-François et Balazinski, Marek. 2018. « Workpiece subsurface temperature study during aluminum skin milling in slotting and ramping ». In 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest, Hungary, June 25-27, 2018) Coll. « Procedia CIRP », vol. 77. pp. 417-420. Elsevier.
Compte des citations dans Scopus : 1.

Rivera-Gómez, Héctor, Gharbi, Ali, Kenné, Jean-Pierre, Montaño-Arango, Oscar et Hernández-Gress, Eva Selene. 2018. « Subcontracting strategies with production and maintenance policies for a manufacturing system subject to progressive deterioration ». International Journal of Production Economics, vol. 200. pp. 103-118.
Compte des citations dans Scopus : 32.

Robin, Olivier, Amédin, Celse Kafui, Atalla, Noureddine, Doutres, Olivier et Sgard, Franck. 2018. « Méthodologie innovante pour la caractérisation des matériaux acoustiques en laboratoire et étude de son applicabilité sur le terrain ». Coll. « Rapports Scientifiques », vol. R-1022. Montréal : IRSST. 119 p.

Rohart, Vincent, Dubé, Martine et Laberge Lebel, Louis. 2018. « Effects of temperature on the apparent lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints ». In SAMPE Long Beach 2018 Conference and Exhibition; (Long Beach, CA, USA, May 21-24, 2018) SAMPE.
Compte des citations dans Scopus : 2.

Rohart, Vincent, Laberge Lebel, Louis et Dubé, Martine. 2018. « Better Knowledge of Aging Welded Composites ». [Article de recherche]. Substance ÉTS.

Rohart, Vincent, Laberge Lebel, Louis et Dubé, Martine. 2018. « Mieux connaître le vieillissement des composites soudés ». [Article de recherche]. Substance ÉTS.

Rouhollah Dermanaki, Farahani, Janier, Mathieu et Dubé, Martine. 2018. « Conductive films of silver nanoparticles as novel susceptors for induction welding of thermoplastic composites ». Nanotechnology, vol. 29, nº 12.

Rousse, Daniel, Yan, Charlotte, Glaus, Mathias, Ilinca, Adrian, Ibrahim, Hussein, Chandra, Ambrish, Zednik, Ricardo, Agbossou, Kodjo et Haillot, Didier. 2018. « Analyse décisionnelle multicritères pour déterminer un système de chauffage de remplacement pour les collectivités éloignées du Nunavik ». In CIFEM 2018 - Colloque International Francophone en Énergétique et Mécanique : Conference Proceedings (Cotonou, Bénin, 23-25 avril 2018) pp. 157-162.

Saboktakin, A., Vu-Khanh, T., Butun, V. et Pantyukhov, P.. 2018. « Characteristics of tufted preforms subjected to different mechanical loading for aerospace applications ». FME Transactions, vol. 46, nº 2. pp. 224-229.
Compte des citations dans Scopus : 1.

Sadeghifar, Morteza, Sedaghati, Ramin, Jomaa, Walid et Songmene, Victor. 2018. « A comprehensive review of finite element modeling of orthogonal machining process: chip formation and surface integrity predictions ». International Journal of Advanced Manufacturing Technology, vol. 96, nº 9-12. pp. 3747-3791.
Compte des citations dans Scopus : 64.

Sadeghifar, Morteza, Sedaghati, Ramin, Jomaa, Walid et Songmene, Victor. 2018. « Finite element analysis and response surface method for robust multi-performance optimization of radial turning of hard 300M steel ». International Journal of Advanced Manufacturing Technology, vol. 94, nº 5-8. pp. 2457-2474.
Compte des citations dans Scopus : 31.

Saidi, M. N., Songmene, V., Kouam, J. et Bahloul, A.. 2018. « Rotational and translation-free polishing of granite: surface quality and dust particles emission and dispersion ». International Journal of Advanced Manufacturing Technology, vol. 98, nº 1-4. pp. 289-303.
Compte des citations dans Scopus : 5.

Saleem, Essa Abrahim Abdulgader, Dao, Thien-My et Liu, Zhaoheng. 2018. « Multiple objective optimization and design of series-parallele using novel hybrid genetic algorithm meta-heuristic approach ». World Journal of Engineering and Technology, vol. 6, nº 3. pp. 532-555.

Samad, A., Morency, F. et Volat, C.. 2018. « Numerical model of the blade element momentum theory for rotating airfoils with heat transfer calculation ». In 2018 Joint Thermophysics and Heat Transfer Conference (Atlanta, GA, USA, June 25-29, 2018) Coll. « AIAA paper », vol. AIAA 2018-4077. Reston, VA, USA : AIAA.
Compte des citations dans Scopus : 1.

Sattarpanah Karganroudi, Sasan, Cuillière, Jean-Christophe, François, Vincent et Tahan, Souheil-Antoine. 2018. « “What-if” scenarios towards virtual assembly-state mounting for non-rigid parts inspection using permissible loads ». International Journal of Advanced Manufacturing Technology, vol. 97, nº 1-4. pp. 353-373.
Compte des citations dans Scopus : 12.

Savaria, C., Phutthavong, P., Moustapha, H. et Garnier, F.. 2018. « Preliminary design for turbine housing and shroud segments ». Aeronautical Journal, vol. 122, nº 1248. pp. 260-282.

Seede, Raiyan, Mostafa, Ahmad, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun. 2018. « Microstructural and microhardness evolution from homogenization and hot isostatic pressing on selective laser melted inconel 718: Structure, texture, and phases ». Journal of Manufacturing and Materials Processing, vol. 2, nº 2.
Compte des citations dans Scopus : 49.

Sgard, Franck, Benacchio, Simon, Luan, Yu, Xu, Huiyang, Carillo, Kevin, Doutres, Olivier, Nelisse, Hugues, Wagnac, Eric et De Guise, Jacques. 2018. « Vibroacoustic modeling of an in vivo human head wearing a hearing protection device using the finite element method ». In Euronoise 2018 : Conference Proceedings : the 11th European Congress and Exposition on Noise Control Engineering (Heraklion, Crete - Greece, May 27-31, 2018) pp. 899-906. EAA – HELINA.

Shaer, Bassel, Kenné, Jean-Pierre, Kaddissi, Claude et Fallaha, Charles. 2018. « A chattering-free fuzzy hybrid sliding mode control of an electrohydraulic active suspension ». Transactions of the Institute of Measurement and Control, vol. 40, nº 1. pp. 222-238.
Compte des citations dans Scopus : 19.

Sheremetyev, V., Kudryashova, A., Dubinskiy, S., Galkin, S., Prokoshkin, S. et Brailovski, V.. 2018. « Structure and functional properties of metastable beta Ti-18Zr-14Nb (at.%) alloy for biomedical applications subjected to radial shear rolling and thermomechanical treatment ». Journal of Alloys and Compounds, vol. 737. pp. 678-683.
Compte des citations dans Scopus : 43.

Sheremetyev, Vadim A., Bonartsev, Anton P., Dubinskiy, Sergey M., Zhukova, Yulia S., Bonartseva, Garina A., Makhina, Tatiana K., Akoulina, Elizaveta A., Ivanova, Elina V., Kotlyarova, Maria S., Prokoshkin, Sergey D., Brailovski, Vladimir et Shaitan, Konstantin V.. 2018. « Surface modification of Ti-Nb-Zr foams by Poly(3-Hydroxybutyrate) ». In 3rd International Conference on Shape Memory Alloys (SMA) 2018 (Chelyabinsk, Russia, Aug. 16-20, 2018) Coll. « Materials Research Proceedings », vol. 9. pp. 74-79. Millersville : Materials Research Forum Llc.

Slim, Hussein, Nadeau, Sylvie et Morency, François. 2018. « FRAM: A complex system’s approach for the evaluation of aircraft on-ground deicing operations ». In Gesellschaft für Arbeitswissenschaft (Francfort, Allemagne, Fev. 21-23, 2018) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 64. GFA Press.

Slim, Hussein, Nadeau, Sylvie et Morency, François. 2018. « The application of the Functional Resonance Analysis Method (FRAM) to evaluate factors affecting times-to-completion and graduation in graduate studies ». In Gesellschaft für Arbeitswissenschaft (Francfort, Allemagne, Fev. 21-23, 2018) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 64. GFA Press.

Songmene, V., Kouam, J. et Balhoul, A.. 2018. « Effect of minimum quantity lubrication (MQL) on fine and ultrafine particle emission and distribution during polishing of granite ». Measurement: Journal of the International Measurement Confederation, vol. 114. pp. 398-408.
Compte des citations dans Scopus : 18.

Songmene, V., Miazza, A., Kouam, J. et Olufayo, O.A.. 2018. « Machining granite materials: effects of polishing conditions on part quality, fine and ultrafine particles emission ». In 7th International Metrology Conference – CAFMET 2018 (Marrakech, Maroc, Apr. 09-12, 2018) pp. 37-46. Comite Africain de Metrologie.

Songmene, Victor. 2018. « Effect of machining & lubricating conditions on dust emission during granite polishing ». Communication lors de la conférence : 4th International Conference on Occupational Health and Safety, EuroSciCon (London, UK, May 28-29, 2018).

Songmene, Victor, Miazza, Alban, Hechmi, Mohamed Amine, Olufayo, Oluwole Ayodeji et Kouam, Jules. 2018. « Granite polishing: Effects of polishing parameters and tool paths on part quality and dust emission ». In 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest , Hungary, June 25-27, 2018) Coll. « Procedia CIRP », vol. 77. pp. 139-142. Elsevier.
Compte des citations dans Scopus : 3.

Songmene, Victor, Zaghbani, Imed et Kientzy, Guillaume. 2018. « Machining and machinability of tool steels: Effects of lubrication and machining conditions on tool wear and tool life data ». In 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest, Hungary, June 25-27, 2018) Coll. « Procedia CIRP », vol. 77. pp. 505-508. Elsevier.
Compte des citations dans Scopus : 13.

Soul, Hugo, Terriault, Patrick et Brailovski, Vladimir. 2018. « The static and fatigue behavior of AlSiMg alloy plain, notched, and diamond lattice specimens fabricated by laser powder bed fusion ». Journal of Manufacturing and Materials Processing, vol. 2, nº 2.
Compte des citations dans Scopus : 9.

Soulez, Gilles, Fatimi, Ahmed, Coutu, Jean-Michel, Raymond, Jean et Lerouge, Sophie (inventeurs) 17 juillet 2018. « Embolizing sclerosing hydrogel ». Socovar, Val-Chum Limted Partnership (titulaire(s)). Brevet canadien CA 2704971. [Titre traduit: Hydrogel d'embolisation sclerosante].

Sun, Binhan, Fazeli, Fateh, Scott, Colin, Guo, Baoqi, Aranas, Clodualdo, Chu, Xin, Jahazi, Mohammad et Yue, Stephen. 2018. « Microstructural characteristics and tensile behavior of medium manganese steels with different manganese additions ». Materials Science and Engineering A, vol. 729. pp. 496-507.
Compte des citations dans Scopus : 93.

Tagawa, Gitsuzo B. S., Morency, François et Beaugendre, Héloïse. 2018. « CFD study of airfoil lift reduction caused by ice roughness ». In 2018 Applied Aerodynamics Conference (Reston, VA, USA, June 25-29, 2018) Coll. « AIAA Paper », vol. AIAA 2018-3010. American Institute of Aeronautics and Astronautics.
Compte des citations dans Scopus : 10.

Talebi, Seyyed Hesamodin, Ghasemi-Nanesa, Hadi, Jahazi, Mohammad et Melkonyan, Haikouhi. 2018. « Influence of starting microstructure on dilatation behavior during tempering of a high strength steel ». In THERMEC 2018 : 10th International Conference on Processing and Manufacturing of Advanced Materials (Paris, France, July 9-13, 2018) Coll. « Materials Science Forum », vol. 941. pp. 305-310. Trans Tech Publications.
Compte des citations dans Scopus : 2.

Talebi, Seyyed Hesamondin, Jahazi, Mohammad et Melkonyan, Haikouhi. 2018. « Retained austenite decomposition and carbide precipitation during isothermal tempering of a medium-carbon low-alloy bainitic steel ». Materials, vol. 11, nº 8.
Compte des citations dans Scopus : 14.

Tata, M., Smaili, A. et Masson, C.. 2018. « Effect of grid topology on numerical simulations of flow fields around wind turbine nacelle anemometer ». Journal of Applied Fluid Mechanics, vol. 11, nº 6. pp. 1569-1578.
Compte des citations dans Scopus : 3.

Terriault, Patrick et Brailovski, Vladimir. 2018. « Modeling and simulation of large, conformal, porosity-graded and lightweight lattice structures made by additive manufacturing ». Finite Elements in Analysis and Design, vol. 138. pp. 1-11.
Compte des citations dans Scopus : 28.

Tétrault, P. et Seers, P.. 2018. « Potential of a jet-induced shock wave to influence an upstream droplet cloud in compression-ignition engines using multiple injection strategies ». International Journal of Multiphase Flow, vol. 101. pp. 64-73.
Compte des citations dans Scopus : 2.

Texier, D., Atmani, F., Bocher, P., Nadeau, F., Chen, J., Zedan, Y., Vanderesse, N. et Demers, V.. 2018. « Fatigue performances of FSW and GMAW aluminum alloys welded joints: Competition between microstructural and structural-contact-fretting crack initiation ». International Journal of Fatigue, vol. 116. pp. 220-233.
Compte des citations dans Scopus : 42.

Timercan, Anatolie, Brailovski, Vladimir, Lussier, Bertrand, Petit, Yvan et Seguin, Bernard. 8 mai 2018. « 3D Printed Personalized Canine Prostheses ». [Article de recherche]. Substance ÉTS.

Timercan, Anatolie, Brailovski, Vladimir, Lussier, Bertrand, Petit, Yvan et Seguin, Bernard. 8 mai 2018. « Prothèses canines personnalisées imprimées en 3D ». [Article de recherche]. Substance ÉTS.

Tolouei, Ehsan, Toroghinejad, Mohammad Reza, Asgari, Hamed, Monajati Zadeh, Hossein, Ashrafizadeh, Fakhreddin, Szpunar, Jerzy A. et Bocher, Philippe. 2018. « Microstructure and texture development in Al-3%Brass composite produced through ARB ». Advanced Engineering Materials, vol. 20, nº 4.
Compte des citations dans Scopus : 4.

Touahir, Kamel, Bilek, Ali, Larbi, Said, Djebali, Said et Bocher, Philippe. 2018. « 3D stress analysis of a loaded birefringent sphere by photoelastic experiment and finite elements method ». In 24th Conference on Applications of Computer Algebra (Santiago de Compostela, Spain, June 18-22, 2018)

Touani, K. F., Der Sarkissian, S., Borie, M., Noiseux, N. et Lerouge, S.. 2018. « Pharmacological preconditioning improves viability, paracrine activities and neoangiogenesis of hydrogel encapsulated mesenchymal stem cells ». Affiche présentée lors de la conférence : 34th Annual Meeting of the Canadian Biomaterials Society (Victoria, BC, Canada, May 16-19, 2018).

Tran, T.-N., Nguyen, C.-C. et Pham, X.-T.. 2018. « Multi-physics modeling of aluminium laser welding process ». Affiche présentée lors de la conférence : REGAL student’s day (Montreal, QC, Canada, June 18-19, 2018).

Trochu, F., Hilal, S., Huang, W., Sun, Y., Causse, P. et Brailovski, V.. 2018. « Reconstruction and data compression of three-dimensional composite fiber architecture from microtomographic images ». In 7th International Symposium on Air/Craft Materials (ACMA) (Compiègne, France, Apr. 24-26, 2018)

Tu, Fubin, Delbergue, Dorian, Klotz, Thierry, Bag, Amrita, Miao, Hongyan, Bianchetti, Charles, Brochu, Myriam, Bocher, Philippe et Levesque, Martin. 2018. « Discrete element-periodic cell coupling model and investigations on shot stream expansion, Almen intensities and target materials ». International Journal of Mechanical Sciences, vol. 145. pp. 353-366.
Compte des citations dans Scopus : 16.

Tuduri, L., Cloutier, Y., Bahloul, A., Hallé, S., Tessier, D., Dolez, P., Giraudel, J.-L. et Yip, P.. 2018. « Penetration of solid aerosols through nonwoven materials from type-5 chemical protective clothing ». Communication lors de la conférence : The 11th International Occupational Hygiene Association international Scientific Conference (Washington, DC, USA, Sept. 24-26, 2018).

Valentin, Mathilde, Monfet, Danielle et Kajl, Stanislaw. 2018. « Calibration bottom-up d'un système CVCA complexe à l'aide de données mesurées ». In eSim 2018 (Montréal, QC, Canada, May 09-10, 2018)

Vanderesse, N., Larregain, B., Bridier, F. et Bocher, P.. 2018. « Experimental assessment of high heating rates in induction heating with temperature-sensitive lacquers ». Journal of Materials Engineering and Performance, vol. 27, nº 8. pp. 3831-3843.

Vanderesse, N., Richter, A., Nuño, N. et Bocher, P.. 2018. « Measurement of deformation heterogeneities in additive manufactured lattice materials by Digital Image Correlation: Strain maps analysis and reliability assessment ». Journal of the Mechanical Behavior of Biomedical Materials, vol. 86. pp. 397-408.
Compte des citations dans Scopus : 27.

Veditti, Tony, Tran, Nguyen Duy Phuong et Ngo, Anh Dung. 2018. « Dynamic fuzzy safety analysis of an industrial system ». In AHFE 2017 International Conference on Safety Management and Human Factors, 2017, July 17, 2017 - July 21, 2017 (Los Angeles, CA, USA, July 17-21, 2017) Coll. « Advances in Intelligent Systems and Computing », vol. 604. pp. 465-471. Springer Verlag.
Compte des citations dans Scopus : 1.

VelezMarquez, Maria Isabel, Raymond, Jasmin, Blessent, Daniela, Philippe, Mikael, Simon, Nataline, Bour, Olivier et Lamarche, Louis. 2018. « Distributed thermal response tests using a heating cable and fiber optic temperature sensing ». Energies, vol. 11, nº 11.
Compte des citations dans Scopus : 27.

Venditti, Tony, Tran, Nguyen Duy Phuong et Ngo, Anh Dung. 2018. « System safety analysis of an industrial process using fuzzy methodology ». In 4th International Conference on Fuzzy Systems and Data Mining (FSDM 2018) (Bangkok, Thailand, Nov. 15-16, 2018) Coll. « Frontiers in Artificial Intelligence and Applications », vol. 309. pp. 108-121. IOS Press.

Viallet, Guilhem et Voix, Jérémie. 2018. « Numerical modeling of the ear canal: benefits and challenges ». Communication lors de la conférence : National Hearing Conservation Association Annual Conference 2018 (Orlando, FL, USA, Feb. 15-17, 2018).

Vinches, Ludwig et Hallé, Stéphane. 2018. « Effects of size and morphology of TiO2 and SiO2 airborne nanoparticles on their filtration through chemical protective clothing ». International Journal of Theoretical and Applied Nanotechnology, vol. 6. pp. 11-20.

Voix, Jérémie. 2018. « Hearing protector fit-testing and the new ANSI S12.71 standard ». In 25th International Congress on Sound and Vibration (ICSV) : Hiroshima Calling (Hiroshima, Japan, July 08-12, 2018) pp. 2392-2399. International Institute of Acoustics and Vibration.

Voix, Jeremie et Dumoulin, Romain. 2018. « Inciting our children to turn their music down: The AYE concept ». The Journal of the Acoustical Society of America, vol. 144, nº 3. p. 1929.
Compte des citations dans Scopus : 1.

Voix, Jérémie, Dumoulin, Romain et Levesque, Julia. 2018. « Inciting our children to turn their music down: the AYE concept proposal ». Canadian Acoustics - Acoustique Canadienne, vol. 46, nº 4. pp. 14-15.
Compte des citations dans Scopus : 1.

Voix, Jérémie, Laperle, Jean-Nicolas, Mazur, Jakub et Bernier, Antoine (inventeurs) 9 octobre 2018. « Advanced communication earpiece device and method ». EERS Global Technologies Inc. (titulaire(s)). Brevet américain US 10,097,149.

Wang, Wei, Liu, Huaiju, Zhu, Caichao, Bocher, Philippe, Liu, Heli et Sun, Zhangdong. 2018. « Evaluation of rolling contact fatigue of a carburized wind turbine gear considering the residual stress and hardness gradient ». Journal of Tribology, vol. 140, nº 6.
Compte des citations dans Scopus : 39.

Wingert, L., Cloutier, Y., Hallé, S. et Tuduri, L.. 2018. « Effective density determination for workplace real-time monitoring of ultrafine aerosols using an ELPI+ ». Communication lors de la conférence : 10th Aerosol Conference (IAC) (St. Louis, MO, USA, Sept. 2-7, 2018).

Wingert, L., Hallé, S., Cloutier, Y. et Tuduri, L.. 2018. « Méthode d’estimation sur les lieux de travail de la densité effective pour l’échantillonnage en temps réel des particules ultrafines avec un ELPI+ ». Communication lors de la conférence : 40e Congrès Annuel de l'AQHSST (Saguenay, QC, Canada, 16-18 mai, 2018).

Wingert, L., Tuduri, L., Cloutier, Y., Hallé, S., Bahloul, A., Tessier, D., Giraudel, J.-L., Dolez, P. et Yip, P.. 2018. « Filtration performances study of porous media composing protective clothing against solid aerosols ». Communication lors de la conférence : 10th Aerosol Conference (IAC) (St. Louis, MO, USA, Sept. 2-7, 2018).

Zaabar, I., Beauregard, Y. et Paquet, M.. 2018. « Using multicriteria decision making methods to manage systems obsolescence ». In 2018 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Bangkok, Thailand, Dec. 16-19, 2018) pp. 803-807. IEEE.
Compte des citations dans Scopus : 3.

Zemzem, M., Vinches, L. et Hallé, S.. 2018. « Processing parameter effect on barrier properties of nitrile based nanocomposite membrane ». Communication lors de la conférence : ANTEC® The Plastics Technology Conference, Society of Plastics Engineers (Orlando, FL, USA, May 7-10, 2018).

Zemzem, Mohamed, Vinches, Ludwig et Hallé, Stéphane. 2018. « Processing parameters effect on barrier properties of nitrile based nanocomposite membrane ». In 2018 Society of Plastics Engineers Annual Technical Conference (ANTEC) (Orlando, FL, USA, May 07-11, 2018) Coll. « Annual Technical Conference - ANTEC, Conference Proceedings » Society of Plastics Engineers.

Zhang, C., Shahriari, D., Loucif, A., Melkonyan, H. et Jahazi, M.. 2018. « Influence of thermomechanical shrinkage on macrosegregation during solidification of a large-sized high-strength steel ingot ». International Journal of Advanced Manufacturing Technology, vol. 99, nº 9-12. pp. 3035-3048.
Compte des citations dans Scopus : 12.

Zhang, Chunping, Loucif, Abdelhalim, Jahazi, Mohammad, Tremblay, Rami et Lapierre, Louis-Philippe. 2018. « On the effect of filling rate on positive macrosegregation patterns in large size cast steel ingots ». Applied Sciences, vol. 8, nº 10.
Compte des citations dans Scopus : 15.

Zhu, Linbo B., Bouzid, Abdel-Hakim, Hong, Jun et Zhang, Zaoxiao. 2018. « Elastic interaction in bolted flange joints: An analytical model to predict and optimize bolt load ». Journal of Pressure Vessel Technology, vol. 140, nº 4. p. 10.
Compte des citations dans Scopus : 17.

Zhu, Linbo, Bouzid, Abdel-Hakim et Hong, Jun. 2018. « Analytical evaluation of elastic interaction in bolted flange joints ». International Journal of Pressure Vessels and Piping, vol. 165. pp. 176-184.
Compte des citations dans Scopus : 25.

Zhu, Linbo, Hou, Yifei, Bouzid, Abdel-Hakim et Hong, Jun. 2018. « On the design of contact member surface shape of bolted joints to minimize clamping load loss ». In ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018) ASME.
Compte des citations dans Scopus : 1.

Zhuldybina, M., Trudeau, C., Ropagnol, X., Bolduc, M., Zednik, R. J. et Blanchard, F.. 2018. « Terahertz vortex phase plate from a printed electronic device ». In 2018 Photonics North Conference (PN) (Montreal, QC, Canada, June 5-7, 2018) IEEE.
Compte des citations dans Scopus : 1.

Zokagoa, Jean-Marie et Soulaimani, Azzeddine. 2018. « A POD-based reduced-order model for uncertainty analyses in shallow water flows ». International Journal of Computational Fluid Dynamics, vol. 32, nº 6-7. pp. 278-292.
Compte des citations dans Scopus : 10.

Zongo, Floriane, Tahan, Antoine, Aidibe, Ali et Brailovski, Vladimir. 2018. « Intra- and inter-repeatability of profile deviations of an AlSi10Mg tooling component manufactured by laser powder bed fusion ». Journal of Manufacturing and Materials Processing, vol. 2, nº 3.
Compte des citations dans Scopus : 14.

Cette liste a été générée le Fri Mar 29 01:47:47 2024 EDT.