ENGLISH |
L'affiliation est "Génie mécanique"Aller à Ahmadi, Ali | Al Haddad, Kamal | Bocher, Philippe | Bonev, Ilian | Boton, Conrad | Bouzid, Hakim | Brailovski, Vladimir | Bélanger, Pierre | Champliaud, Henri | Chatelain, Jean-François | Dagdeviren, Omur | David, Éric | Demarquette, Nicole R. | Demers, Vincent | Doré, Sylvie | Doutres, Olivier | Dubé, Martine | Dupont, Thomas | Gagnon, Ghyslain | Glaus, Mathias | Guilbault, Raynald | Haillot, Didier | Hallé, Stéphane | Hausler, Robert | Helal, Emna | Hof, Lucas | Ilinca, Adrian | Jahazi, Mohammad | Kenné, Jean-Pierre | Lalonde, Sébastien | Lamarche, Louis | Lemaire, Romain | Lerouge, Sophie | Levasseur, Annie | Liu, Zhaoheng | Lê, Van Ngan | Monfet, Danielle | Moosavi-Khoonsari, Elmira | Morency, François | Nadeau, Sylvie | Petit, Yvan | Pham, Tan | Rousse, Daniel R. | Saad, Maarouf | Sanjosé, Marlène | Songmene, Victor | Soulaïmani, Azzeddine | St-Onge, David | Tahan, Antoine | Thamsuwan, Ornwipa | Thomas, Marc | Voix, Jérémie | Vu, Viet Hung | Wagnac, Éric | Zednik, Ricardo | Zhang, Kun Nombre de documents archivés : 171. Ahmadi, Ali
Bayansal, F., Yuksel, M. T., MacDougall, S. et Ahmadi, A..
2024.
« Fabrication and characterization of chemiresistive CuO sensors sensitized by Ca-doping for detection of sweat electrolyte concentration ».
Ceramics International, vol. 50, nº 7 part A.
pp. 10131-10136.
Madadian, Elias, Ravanbakhsh, Hossein, Touani Kameni, Francesco, Rahimnejad, Maedeh, Lerouge, Sophie et Ahmadi, Ali.
2024.
« In-foam bioprinting: An embedded bioprinting technique with self-removable support bath ».
Small Science.
Sadeghianmaryan, Ali, Ahmadian, Nivad, Wheatley, Sydney, Alizadeh Sardroud, Hamed, Nasrollah, Seyyed Ahmad Seyyed, Naseri, Emad et Ahmadi, Ali.
2024.
« Advancements in 3D-printable polysaccharides, proteins, and synthetic polymers for wound dressing and skin scaffolding – A review ».
International Journal of Biological Macromolecules, vol. 266, nº Part 1.
Al Haddad, Kamal
Bechara, Helene, Zemouri, Ryad, Kedjar, Bachir, Merkhouf, Arezki, Al-Haddad, Kamal et Tahan, Antoine.
2024.
« Non-invasive detection of rotor inter-turn short circuit in large hydrogenerators by using stray flux measurement combined with convolutional variational autoencoder analysis (CVAE) ».
IEEE Transactions on Industry Applications, vol. 60, nº 1.
pp. 196-205.
Ibrahim, Rony, Zemouri, Ryad, Kedjar, Bachir, Merkhouf, Arezki, Tahan, Antoine, Al-Haddad, Kamal et Lafleur, François.
2024.
« Non-invasive detection of rotor inter-turn short circuit of a hydrogenerator using AI-based variational autoencoder ».
IEEE Transactions on Industry Applications, vol. 60, nº 1.
pp. 28-37.
Ibrahim, Rony, Zemouri, Ryad, Tahan, Antoine, Kedjar, Bachir, Merkhouf, Arezki et Al-Haddad, Kamal.
2024.
« Fault detection based on vibration measurements and variational autoencoder-desirability function ».
IEEE Open Journal of Industry Applications, vol. 5.
pp. 106-116. Bocher, Philippe
Pourdavood, Mohammad et Bocher, Philippe.
2024.
« Statistical modeling of microstructurally short crack growth in high cycle fatigue ».
Materials Science and Engineering: A, vol. 892.
Bonev, Ilian
Slamani, Mohamed, Makri, Hocine, Boudilmi, Aissa, Bonev, Ilian A. et Chatelain, Jean-François.
2024.
« Calibration strategies for enhancing accuracy in serial industrial robots for orbital milling applications ».
Industrial Robot.
Xing, Kanglin, Bonev, Ilian A., Champliaud, Henri et Liu, Zhaoheng.
2024.
« Optimizing dynamic measurement accuracy for machine tools and industrial robots with unscented Kalman filter and particle swarm optimization methods ».
Measurement Science and Technology, vol. 35, nº 8.
Xing, Kanglin, Bonev, Ilian A., Liu, Zhaoheng et Champliaud, Henri.
2024.
« Influence of machining parameters on dynamic errors in a hexapod machining cell ».
International Journal of Advanced Manufacturing Technology, vol. 131, nº 3-4.
pp. 1317-1334.
Xing, Kanglin, Mayer, J. R. R., Bonev, Ilian A., Champliaud, Henri et Liu, Zhaoheng.
2024.
« Evaluation of the positioning accuracy along helical paths using a telescoping ballbar ».
ASME Letters in Dynamic Systems and Control, vol. 4, nº 1.
Boton, Conrad
Khan, Numan, Nadeau, Sylvie, Pham, Xuan-Tan et Boton, Conrad.
2024.
« Exploring associations between accident types and activities in construction using natural language processing ».
Automation in Construction, vol. 164.
Bouzid, Hakim
Belhaou, Meriem, Laghzale, Nor Eddine et Bouzid, Abdel-Hakim.
2024.
« Residual stresses in autofrettaged functionally graded pressurized thick cylinders ».
International Journal of Pressure Vessels and Piping, vol. 208.
Benfriha, Khaled, Adjoul, Oussama, Bouzid, Abdel-Hakim et Wardle, Peter.
2024.
« Interactive design on the product life cycle costs: a case study ».
International Journal on Interactive Design and Manufacturing, vol. 18, nº 2.
pp. 837-846.
Bouzid, Abdel-Hakim, Bouzid, Sofiane et Benfriha, Khaled.
2024.
« On the strength and tightness of ASME B16.5 and B16.47 series a standard flanges ».
Journal of Pressure Vessel Technology, vol. 146, nº 1.
Hakimian, Soorosh, Bouzid, Abdel-Hakim et Hof, Lucas A..
2024.
« An improved fixture to quantify corrosion in bolted flanged gasketed joints ».
Journal of Pressure Vessel Technology, vol. 146, nº 1.
Hakimian, Soorosh, Bouzid, Abdel-Hakim et Hof, Lucas A..
2024.
« Effect of gap size on flange face corrosion ».
Materials and Corrosion-Werkstoffe Und Korrosion.
Hakimian, Soorosh, Bouzid, Abdel-Hakim et Hof, Lucas A..
2024.
« Effect of gasket material on flange face corrosion ».
International Journal of Pressure Vessels and Piping, vol. 209.
Hakimian, Soroosh, Bouzid, Abdel-Hakim et Hof, Lucas A..
2024.
« Corrosion failures of flanged gasketed joints: A review ».
Journal of Advanced Joining Processes, vol. 9.
Rousseau, Rashique Iftekhar, Bouzid, Abdel-Hakim et Zhao, Zijian.
2024.
« On the re-evaluation of the clamped members stiffness of bolted joints ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 48, nº 1.
pp. 75-83.
Zhao, Zijan et Bouzid, Abdel-Hakim.
2024.
« A study on the contact quality improvement of fin to tube assemblies ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 48, nº 2.
pp. 173-182.
Zhao, Zijan, Bouzid, Abdel-Hakim et Laghzale, Nor Eddine.
2024.
« Plastically deformed tubes subjected to mechanical expansion processes ».
Materials, vol. 17, nº 11.
Brailovski, Vladimir
Derkach, M., Gunderov, D., Tabachkova, N., Cheverikin, V., Zolotukhin, E., Prokoshkin, S., Brailovski, V. et Sheremetyev, V..
2024.
« Effect of low and high temperature ECAP modes on the microstructure, mechanical properties and functional fatigue behavior of Ti-Zr-Nb alloy for biomedical applications ».
Journal of Alloys and Compounds, vol. 976.
Desrosiers, Catherine, Letenneur, Morgan, Bernier, Fabrice, Piche, Nicolas, Provencher, Benjamin, Cheriet, Farida, Guibault, François et Brailovski, Vladimir.
2024.
« Automated porosity segmentation in laser powder bed fusion part using computed tomography: A validity study ».
Journal of Intelligent Manufacturing.
Leclercq, Aurore et Brailovski, Vladimir.
2024.
« Improving laser powder bed fusion printability of tungsten powders using simulation-driven process optimization algorithms ».
Materials, vol. 17, nº 8.
Sheremetyev, V., Konopatsky, A., Teplyakova, T., Lezin, V., Lukashevich, K., Derkach, M., Kostyleva, A., Koudan, E., Permyakova, E., Iakimova, T., Boychenko, O., Klyachko, N., Shtansky, D., Prokoshkin, S. et Brailovski, V..
2024.
« Surface modification of the laser powder bed-fused Ti-Zr-Nb scaffolds by dynamic chemical etching and Ag nanoparticles decoration ».
Biomaterials Advances, vol. 161.
Sheremetyev, V., Lukashevich, K., Aleksandrovskiy, E., Vasilyev, K., Komarov, R., Brailovski, V. et Prokoshkin, S..
2024.
« Hot 3-roll longitudinal rolling and tension straightening of a superelastic Ti-Zr-Nb alloy for orthopedic implants: Microstructure, texture, mechanical and functional properties ».
Materials Today Communications, vol. 40.
Sirois, Julien, Sanjosé, Marlène, Sanchez, Fabian et Brailovski, Vladimir.
2024.
« Vortex-breakdown efficiency of planar regular grid structures—towards the development of design guidelines ».
Fluids, vol. 9, nº 2.
Bélanger, Pierre
Hervé-Côte, Hugo, Dupont-Marillia, Frederic et Bélanger, Pierre.
2024.
« Automatic flaw detection in sectoral scans using machine learning ».
Ultrasonics, vol. 141.
Verma, Bhupesh et Bélanger, Pierre.
2024.
« Surface breaking crack sizing method using pulse-echo Rayleigh waves ».
Ultrasonics, vol. 138.
Champliaud, Henri
Ghodrati, Neda, Champliaud, Henri, Morin, Jean -Benoit et Jahazi, Mohammad.
2024.
« Influence of the hot-top thermal regime on the severity and extent of macrosegregation in large-size steel ingots ».
Journal of Manufacturing and Materials Processing, vol. 8, nº 2.
Nguyen, Huy Hoan, Champliaud, Henri et Le, Van Ngan.
2024.
« Effect of intermediate path on post-wrinkle initiation of the multi-pass metal spinning process: Analysis in the rotating reference frame ».
Journal of Manufacturing and Materials Processing, vol. 8, nº 1.
Xing, Kanglin, Bonev, Ilian A., Champliaud, Henri et Liu, Zhaoheng.
2024.
« Optimizing dynamic measurement accuracy for machine tools and industrial robots with unscented Kalman filter and particle swarm optimization methods ».
Measurement Science and Technology, vol. 35, nº 8.
Xing, Kanglin, Bonev, Ilian A., Liu, Zhaoheng et Champliaud, Henri.
2024.
« Influence of machining parameters on dynamic errors in a hexapod machining cell ».
International Journal of Advanced Manufacturing Technology, vol. 131, nº 3-4.
pp. 1317-1334.
Xing, Kanglin, Mayer, J. R. R., Bonev, Ilian A., Champliaud, Henri et Liu, Zhaoheng.
2024.
« Evaluation of the positioning accuracy along helical paths using a telescoping ballbar ».
ASME Letters in Dynamic Systems and Control, vol. 4, nº 1.
Chatelain, Jean-François
Grine, Madani, Slamani, Mohamed, Laouissi, Aissa, Arslane, Mustapha, Rokbi, Mansour et Chatelain, Jean-François.
2024.
« Enhanced investigations and modeling of surface roughness of epoxy/Alfa fiber biocomposites using optimized neural network architecture with genetic algorithms ».
International Journal of Advanced Manufacturing Technology, vol. 130, nº 5-6.
pp. 3115-3132.
Slamani, Mohamed, Makri, Hocine, Boudilmi, Aissa, Bonev, Ilian A. et Chatelain, Jean-François.
2024.
« Calibration strategies for enhancing accuracy in serial industrial robots for orbital milling applications ».
Industrial Robot.
Dagdeviren, Omur
Dincer, Orcun, Guner, Bugrahan et Dagdeviren, Omur E..
2024.
« Effect of methanol and photoinduced surface oxygen vacancies on the charge carrier dynamics in TiO2 ».
APL Materials, vol. 12, nº 2.
Guner, Bugrahan, Dincer, Orcun et Dagdeviren, Omur E..
2024.
« Fast and slow time-scale effects of photoinduced surface oxygen vacancies on the charge carrier dynamics of TiO2 ».
ACS Applied Energy Materials, vol. 7, nº 6.
pp. 2292-2298. David, Éric
Bensalem, Karim, Eesaee, Mostafa, Hassanipour, Meysam, Elkoun, Saïd, David, Eric, Agbossou, Kodjo et Nguyen-Tri, Phuong.
2024.
« Lifetime estimation models and degradation mechanisms of elastomeric materials: A critical review ».
Polymer Degradation and Stability, vol. 220.
Sultana, S. M. Nourin, Helal, Emna, Gutiérrez, Giovanna, David, Eric, Moghimian, Nima et Demarquette, Nicole R..
2024.
« The influence of a commercial few-layer graphene on the photodegradation resistance of a waste polyolefins stream and prime polyolefin blends ».
Recycling, vol. 9, nº 2.
Demarquette, Nicole R.
Côté, Raphaël, Delbergue, Dorian, Demers, Vincent, Demarquette, Nicole R., Charlon, Sébastien et Soulestin, Jérémie.
2024.
« Influence of process parameters on the occurrence of defects and dimensional properties of green part produced by material extrusion of highly filled polymer ».
Progress in Additive Manufacturing.
de Carvalho Arjona, Jessica, Ulsen, Carina, Valenzuela-Diaz, Francisco Rolando et Demarquette, Nicole Raymonde.
2024.
« Influence of smectite clays' pores volume on isoniazid adsorption and release ».
Applied Clay Science, vol. 252.
Sultana, S. M. Nourin, Helal, Emna, Gutiérrez, Giovanna, David, Eric, Moghimian, Nima et Demarquette, Nicole R..
2024.
« The influence of a commercial few-layer graphene on the photodegradation resistance of a waste polyolefins stream and prime polyolefin blends ».
Recycling, vol. 9, nº 2.
Demers, Vincent
Côté, Raphaël, Delbergue, Dorian, Demers, Vincent, Demarquette, Nicole R., Charlon, Sébastien et Soulestin, Jérémie.
2024.
« Influence of process parameters on the occurrence of defects and dimensional properties of green part produced by material extrusion of highly filled polymer ».
Progress in Additive Manufacturing.
Doré, Sylvie
Rodrigues, Renato B., Cicek, Jilian Seniuk, Jamieson, Marnie et Doré, Sylvie.
2024.
« Investigating canadian engineering students’ perceptions of graduate attributes: Frequency, criticality, and relative importance ».
International Journal of Engineering Pedagogy, vol. 14, nº 2.
pp. 44-64. Doutres, Olivier
Bezançon, Gauthier, Doutres, Olivier, Umnova, Olga, Leclaire, Philippe et Dupont, Thomas.
2024.
« Thin metamaterial using acoustic black hole profiles for broadband sound absorption ».
Applied Acoustics, vol. 216.
Melo, Luiz G. C., Dalaq, Ahmed S., Sgard, Franck, Doutres, Olivier, Legroux, Laurianne et Wagnac, Eric.
2024.
« Measurement of the local static mechanical pressure of earplugs ».
International Journal of Mechanical Sciences, vol. 275.
Padois, Thomas, Prenant, Simon, Dupont, Thomas et Doutres, Olivier.
2024.
« Influence of the vibrating source behavior and source side excitations on the Interface Completeness Criterion ».
Noise Control Engineering Journal, vol. 72, nº 2.
pp. 105-117.
Poissenot-Arrigoni, Bastien, Martin, Laurence, Negrini, Alessia, Berbiche, Djamal, Doutres, Olivier et Sgard, Franck.
2024.
« Reliability of an extended version of the 3m™ Eargage tool to assess earcanal size and assist earplug selection ».
International Journal of Audiology.
Dubé, Martine
Martin, R. G., Johansson, C., Tavares, J. R. et Dubé, M..
2024.
« Manufacturing of thermoplastic composite sandwich panels using induction welding under vacuum ».
Composites Part A: Applied Science and Manufacturing, vol. 182.
Dupont, Thomas
Bezançon, Gauthier, Doutres, Olivier, Umnova, Olga, Leclaire, Philippe et Dupont, Thomas.
2024.
« Thin metamaterial using acoustic black hole profiles for broadband sound absorption ».
Applied Acoustics, vol. 216.
Gallerand, Lucie, Legrand, Mathias, Dupont, Thomas, Panneton, Raymond et Leclaire, Philippe.
2024.
« Damping performance of finite microperforated plates using multi-size and spatial distributions of perforations ».
Applied Acoustics, vol. 222.
Lopez, Maël, Dupont, Thomas et Panneton, Raymond.
2024.
« Mass-spring model for acoustic metamaterials consisting of a compact linear periodic array of dead-end resonators ».
Journal of the Acoustical Society of America, vol. 155, nº 1.
pp. 530-543.
Padois, Thomas, Prenant, Simon, Dupont, Thomas et Doutres, Olivier.
2024.
« Influence of the vibrating source behavior and source side excitations on the Interface Completeness Criterion ».
Noise Control Engineering Journal, vol. 72, nº 2.
pp. 105-117.
Sciard, Magdeleine, Berry, Alain, Sgard, Franck, Dupont, Thomas et Robin, Olivier.
2024.
« Estimation of acoustical materials sound absorption coefficient under oblique incidence plane wave and diffuse field via Allard model inversion ».
Building Acoustics.
Gagnon, Ghyslain
Sirtoli, Vinicius, Morelli, Laura, Zednik, Ricardo J., Cowan, Glenn et Gagnon, Ghyslain.
2024.
« Motion artifact modeling of capacitive electrodes based on triboelectric nanogenerators ».
IEEE Transactions on Instrumentation and Measurement, vol. 73.
Glaus, Mathias
Bannout, Fatima, Barrau, Enora, Beaulieu, Julien, Biron, Nicolas, Bleriot, Jocelyn, Dabadie, Isabelle, Del Bono, Anaïs, Gagnonmtz, Samantha, Glaus, Mathias, Herrmann, Markus, Hof, Lucas, Journeault, Marc, Khlifa, Rim, Laforest, Valérie, Levasseur, Annie, Maillefert, Muriel, Manjong, Nelson, Matt, Mireille, Mongo, Michelle, Morin Chansse, Rémi, Normandin, Daniel, Peillon, Sophie, Raufflet, Emmanuel, Semaan, Marleine, Tanguy, Audrey, Torre, André, Tsonang, Jocelyne, Vaillant, Hervé, Yao, Edouard et Yiougo, Lydie.
2024.
« Économie circulaire en Afrique francophone : enjeux et défis ».
Coll. « Réalisation des ODD ».
Institut de la Francophonie pour le développement durable (IFDD). 252 p. Guilbault, Raynald
Kared, Liticia, Lalonde, Sébastien, Langlois, Sébastien et Guilbault, Raynald.
2024.
« Numerical characterization of overhead conductor local loading conditions at wire contact points in the vicinity of suspension clamps ».
In Dynamics and Aerodynamics of Cables - ISDAC (Rome, Italy, June 15-17, 2023)
Coll. « Lecture Notes in Civil Engineering », vol. 399.
pp. 327-338.
Springer Science and Business Media Deutschland GmbH.
Lalonde, Sébastien, Kared, Liticia, Guilbault, Raynald et Langlois, Sébastien.
2024.
« 3D finite element modelling of conductor-clamp assemblies under cyclic bending: Sensitivity analysis of wire contact coefficient of friction ».
In Dynamics and Aerodynamics of Cables - ISDAC (Rome, Italy, June 15-17, 2023)
Coll. « Lecture Notes in Civil Engineering », vol. 399.
pp. 315-326.
Springer Science and Business Media Deutschland GmbH. Haillot, Didier
Beaulac, Arnaud, Lalonde, Timothé, Haillot, Didier et Monfet, Danielle.
2024.
« Energy modeling, calibration, and validation of a small-scale greenhouse using TRNSYS ».
Applied Thermal Engineering, vol. 248, nº part A.
Lalau, Yasmine, Rigal, Sacha, Bédécarrats, Jean-Pierre et Haillot, Didier.
2024.
« Latent thermal energy storage system for heat recovery between 120 and 150 °C: Material stability and corrosion ».
Energies, vol. 17, nº 4.
Salmon, F., Ghadim, H. Benisi, Godin, A., Haillot, D., Veillere, A., Lacanette, D. et Duquesne, M..
2024.
« Optimizing performance for cooling electronic components using innovative heterogeneous materials ».
Applied Energy, vol. 362.
Hallé, Stéphane
Proulx, H., Debia, M. et Hallé, S..
2024.
« Impact of modified ventilation strategies on water evaporation rate and thermal comfort in an indoor swimming pool by numerical study ».
Building and Environment, vol. 256.
Hausler, Robert
Heath, Megan, St-Onge, David et Hausler, Robert.
2024.
« UV reflectance in crop remote sensing: Assessing the current state of knowledge and extending research with strawberry cultivars ».
PLoS ONE, vol. 19, nº 3.
Helal, Emna
Sultana, S. M. Nourin, Helal, Emna, Gutiérrez, Giovanna, David, Eric, Moghimian, Nima et Demarquette, Nicole R..
2024.
« The influence of a commercial few-layer graphene on the photodegradation resistance of a waste polyolefins stream and prime polyolefin blends ».
Recycling, vol. 9, nº 2.
Hof, Lucas
Bannout, Fatima, Barrau, Enora, Beaulieu, Julien, Biron, Nicolas, Bleriot, Jocelyn, Dabadie, Isabelle, Del Bono, Anaïs, Gagnonmtz, Samantha, Glaus, Mathias, Herrmann, Markus, Hof, Lucas, Journeault, Marc, Khlifa, Rim, Laforest, Valérie, Levasseur, Annie, Maillefert, Muriel, Manjong, Nelson, Matt, Mireille, Mongo, Michelle, Morin Chansse, Rémi, Normandin, Daniel, Peillon, Sophie, Raufflet, Emmanuel, Semaan, Marleine, Tanguy, Audrey, Torre, André, Tsonang, Jocelyne, Vaillant, Hervé, Yao, Edouard et Yiougo, Lydie.
2024.
« Économie circulaire en Afrique francophone : enjeux et défis ».
Coll. « Réalisation des ODD ».
Institut de la Francophonie pour le développement durable (IFDD). 252 p.
Bouche Noumbi, Emmanuel Jonathan, Hof, Lucas et Nadeau, Sylvie.
2024.
« Design of a manufacturing system using the customer journey mapping method: hybrid solar panel assembly (Manual-Automated-5.0), ».
In Congrès IISE 2024 = IISE Annual Conference & Expo 2024 (Montreal, QC, Canada, May 18-21, 2024)
Delbari, Seyed Ali et Hof, Lucas A..
2024.
« Glass waste circular economy - Advancing to high-value glass sheets recovery using industry 4.0 and 5.0 technologies ».
Journal of Cleaner Production, vol. 462.
Ghodsian, Nooshin, Benfriha, Khaled, Olabi, Adel, Gopinath, Varun, Talhi, Esma, Hof, Lucas et Arnou, Aurélien.
2024.
« MSOA: A modular service-oriented architecture to integrate mobile manipulators as cyber-physical systems ».
Journal of Intelligent Manufacturing.
Hakimian, Soorosh, Bouzid, Abdel-Hakim et Hof, Lucas A..
2024.
« An improved fixture to quantify corrosion in bolted flanged gasketed joints ».
Journal of Pressure Vessel Technology, vol. 146, nº 1.
Hakimian, Soorosh, Bouzid, Abdel-Hakim et Hof, Lucas A..
2024.
« Effect of gap size on flange face corrosion ».
Materials and Corrosion-Werkstoffe Und Korrosion.
Hakimian, Soorosh, Bouzid, Abdel-Hakim et Hof, Lucas A..
2024.
« Effect of gasket material on flange face corrosion ».
International Journal of Pressure Vessels and Piping, vol. 209.
Hakimian, Soroosh, Bouzid, Abdel-Hakim et Hof, Lucas A..
2024.
« Corrosion failures of flanged gasketed joints: A review ».
Journal of Advanced Joining Processes, vol. 9.
Mejía-Moncayo, Camilo, Kenné, Jean-Pierre et Hof, Lucas A..
2024.
« A reconfigurable cellular remanufacturing architecture: A multi-objective design approach ».
Journal of Remanufacturing.
Nadeau, Sylvie, Bruder, Ralph et Hof, Lucas A..
2024.
« Utilisation de lunettes intelligentes dans l’assemblage/ désassemblage : État de l’art ».
TD+ Votre travail durable, nº 1.
pp. 21-27. Nadeau, Sylvie, Tahan, Antoine, Kenné, Jean-Pierre et Hof, Lucas A.. 2024. « Le désassemblage de produits : enjeux et perspectives ». Communication lors de la conférence : 44e congrès de l’AQHSST : Fragilisation de la prévention au travail dans un contexte de pénurie : Défis et solutions (Valleyfield, QC, Canada, 22-24 mai 2024).
Pourrahimi, Shamim et Hof, Lucas A..
2024.
« On the post-processing of complex additive manufactured metallic parts: A review ».
Advanced Engineering Materials.
Ilinca, Adrian
Alkhalaf, Mustafa, Ilinca, Adrian, Hayyani, Mohamed Yasser et Martini, Fahed.
2024.
« Impact of diffuser location on thermal comfort inside a hospital isolation room ».
Designs, vol. 8, nº 2.
Aoun, Alain, Adda, Mehdi, Ilinca, Adrian, Ghandour, Mazen et Ibrahim, Hussein.
2024.
« Centralized vs. Decentralized electric grid resilience analysis using Leontief's input-output model ».
Energies, vol. 17, nº 6.
Aoun, Alain, Adda, Mehdi, Ilinca, Adrian, Ghandour, Mazen, Ibrahim, Hussein et Salloum, Saba.
2024.
« Efficient modeling of distributed energy resources' impact on electric grid technical losses: A dynamic regression approach ».
Energies, vol. 17, nº 9.
Benallal, Abdellah, Cheggaga, Nawal, Ilinca, Adrian, Tchoketch-Kebir, Selma, Ait Hammouda, Camelia et Barka, Noureddine.
2024.
« Bayesian inference-based energy management strategy for techno-economic optimization of a hybrid microgrid ».
Energies, vol. 17, nº 1.
Benallal, Abdellah, Hayyani, Mohamed Yasser, Mhadhbi, Ghazi et Ilinca, Adrian.
2024.
« Numerical model of variable valve timing distribution for a supercharged diesel engine ».
International Journal of Applied Power Engineering, vol. 13, nº 1.
pp. 152-164.
Haddouche, Mohamed, Martini, Fahed, Chaouch, Mounir et Ilinca, Adrian.
2024.
« Thermo-hydric study of wood-based materials under thermal comfort conditions ».
Materials, vol. 17, nº 5.
Hosseini Dolatabadi, Sayed Hamid, Soleimani, Alireza, Maghanaki, Maghanaki et Ilinca, Adrian.
2024.
« Enhancing photovoltaic farm capacity estimation: A comprehensive analysis with a novel approach ».
Energy Technology, vol. 12, nº 4.
Khatamijouybari, Alireza et Ilinca, Adrian.
2024.
« Economic appraisal and enhanced efficiency optimization for liquid methanol production process ».
Sustainability, vol. 16, nº 5.
Liu, Qingfeng, Mohamed, Mohamed A., Ilinca, Adrian, Annuk, Andres et Nasr, Emad Abouel.
2024.
« Optimal scheduling of regional integrated energy systems with hot dry rock enhanced geothermal system based on information gap decision theory ».
Energy Science and Engineering.
Monteiro, Amanda, Costa, Tatiane, Vasconcelos, Andrea, Rode, Ana Clara, Filho, Roberto Dias, Mohamed, Mohamed A., Ilinca, Adrian et Marinho, Manoel H. N..
2024.
« Development of a tool for sizing and technical–financial analysis of energy-storage systems using batteries ».
Energy Technology, vol. 12, nº 5.
Moradi, Mehrdad et Ilinca, Adrian.
2024.
« Impact of wave energy converters and port layout on coastal dynamics: Case study of astara port ».
Energies, vol. 17, nº 11.
Qi, Hao, Sharaf, Mohamed, Annuk, Andres, Ilinca, Adrian et Mohamed, Mohamed A..
2024.
« A distributionally robust optimization scheduling model for regional integrated energy systems considering hot dry rock co-generation ».
CMES-Computer Modeling in Engineering & Sciences, vol. 140, nº 2.
pp. 1387-1404.
Rizk, Patrick, Rizk, Frederic, Karganroudi, Sasan Sattarpanah, Ilinca, Adrian, Younes, Rafic et Khoder, Jihan.
2024.
« Advanced wind turbine blade inspection with hyperspectral imaging and 3D convolutional neural networks for damage detection ».
Energy and AI, vol. 16.
Shahcheraghian, Amir, Madani, Hatef et Ilinca, Adrian.
2024.
« From white to black-box models: A review of simulation tools for building energy management and their application in consulting practices ».
Energies, vol. 17, nº 2.
Jahazi, Mohammad
Ghodrati, Neda, Champliaud, Henri, Morin, Jean -Benoit et Jahazi, Mohammad.
2024.
« Influence of the hot-top thermal regime on the severity and extent of macrosegregation in large-size steel ingots ».
Journal of Manufacturing and Materials Processing, vol. 8, nº 2.
Heddar, Mohamed Imad Eddine, Mehdi, Brahim, Matougui, Nedjoua, Tahan, Souheil Antoine et Jahazi, Mohammad.
2024.
« Adaptable multi-objective optimization framework: Application to metal additive manufacturing ».
International Journal of Advanced Manufacturing Technology, vol. 132, nº 3-4.
pp. 1897-1914.
Mbakop Nanshie, Vanella, Aidibe, Ali, Heidari, Majid et Jahazi, Mohammad.
2024.
« Impact of coating and microstructure on wear resistance of tool steels for wood cutting: a novel approach to quantification and analysis of wear-related damages ».
Journal of Wood Science, vol. 70, nº 1.
Momeni, A., Ebrahimi, G. R., Jahazi, M. et Ezatpour, H. R..
2024.
« Microstructure characterization and dynamic recrystallization behavior of Ni–Cu alloy during hot deformation ».
Mechanics of Materials, vol. 193.
Muhammed, Musa, Javidani, Mousa, Ebrahimi Sadrabadi, Tahere, Heidari, Majid, Levasseur, Tom et Jahazi, Mohammad.
2024.
« A comprehensive review of cathodic arc evaporation physical vapour deposition (CAE-PVD) coatings for enhanced tribological performance ».
Coatings, vol. 14, nº 3.
Yang, Jeongho, Heogh, Woongbeom, Ju, Hogi, Kang, Sukhyun, Jang, Tae-Sik, Jung, Hyun-Do, Jahazi, Mohammad, Han, Seung Chul, Park, Seong Je, Kim, Hyoung Seop, Bose, Susmita, Bandyopadhyay, Amit, Jun, Martin Byung-Guk, Kim, Young Won, Kim, Dae-kyeom, Advincula, Rigoberto C., Aranas, Clodualdo et Kim, Sang Hoon.
2024.
« Functionally graded structure of a nitride-strengthened Mg2Si-based hybrid composite ».
Journal of Magnesium and Alloys, vol. 12, nº 3.
pp. 1239-1256. Kenné, Jean-Pierre
Mejía-Moncayo, Camilo, Kenné, Jean-Pierre et Hof, Lucas A..
2024.
« A reconfigurable cellular remanufacturing architecture: A multi-objective design approach ».
Journal of Remanufacturing.
Nadeau, Sylvie, Tahan, Antoine, Kenné, Jean-Pierre et Hof, Lucas A.. 2024. « Le désassemblage de produits : enjeux et perspectives ». Communication lors de la conférence : 44e congrès de l’AQHSST : Fragilisation de la prévention au travail dans un contexte de pénurie : Défis et solutions (Valleyfield, QC, Canada, 22-24 mai 2024). Lalonde, Sébastien
Kared, Liticia, Lalonde, Sébastien, Langlois, Sébastien et Guilbault, Raynald.
2024.
« Numerical characterization of overhead conductor local loading conditions at wire contact points in the vicinity of suspension clamps ».
In Dynamics and Aerodynamics of Cables - ISDAC (Rome, Italy, June 15-17, 2023)
Coll. « Lecture Notes in Civil Engineering », vol. 399.
pp. 327-338.
Springer Science and Business Media Deutschland GmbH.
Lalonde, Sébastien, Kared, Liticia, Guilbault, Raynald et Langlois, Sébastien.
2024.
« 3D finite element modelling of conductor-clamp assemblies under cyclic bending: Sensitivity analysis of wire contact coefficient of friction ».
In Dynamics and Aerodynamics of Cables - ISDAC (Rome, Italy, June 15-17, 2023)
Coll. « Lecture Notes in Civil Engineering », vol. 399.
pp. 315-326.
Springer Science and Business Media Deutschland GmbH. Lamarche, Louis
Lamarche, Louis, Raymond, Jasmin et Giordano, Nicolo.
2024.
« Oscillatory thermal response tests to estimate the ground thermal diffusivity ».
Applied Energy, vol. 353, nº Part A.
Lemaire, Romain
Fischer, O. et Lemaire, R..
2024.
« Thermogravimetric analysis and kinetic modeling of the AAEM-catalyzed pyrolysis of spruce wood, wheat straw, switchgrass, miscanthus and swine manure ».
In Combustion Institute - Canadian Section : Spring Technical Meeting (Kingston, ON, Canada, May 13-16, 2024)
Combustion institute.
Fischer, Olivier, Lemaire, Romain et Bensakhria, Ammar.
2024.
« Thermogravimetric analysis and kinetic modeling of the pyrolysis of different biomass types by means of model-fitting, model-free and network modeling approaches ».
Journal of Thermal Analysis and Calorimetry.
Rainville, C. et Lemaire, R..
2024.
« Comparison of different measurement approaches, including automated ones, allowing determining the smoke point of hydrocarbon fuels ».
In Combustion Institute - Canadian Section : Spring Technical Meeting (Kingston, ON, Canada, May 13-16, 2024)
Combustion Institute. Lerouge, Sophie
Madadian, Elias, Ravanbakhsh, Hossein, Touani Kameni, Francesco, Rahimnejad, Maedeh, Lerouge, Sophie et Ahmadi, Ali.
2024.
« In-foam bioprinting: An embedded bioprinting technique with self-removable support bath ».
Small Science.
Levasseur, Annie
Bannout, Fatima, Barrau, Enora, Beaulieu, Julien, Biron, Nicolas, Bleriot, Jocelyn, Dabadie, Isabelle, Del Bono, Anaïs, Gagnonmtz, Samantha, Glaus, Mathias, Herrmann, Markus, Hof, Lucas, Journeault, Marc, Khlifa, Rim, Laforest, Valérie, Levasseur, Annie, Maillefert, Muriel, Manjong, Nelson, Matt, Mireille, Mongo, Michelle, Morin Chansse, Rémi, Normandin, Daniel, Peillon, Sophie, Raufflet, Emmanuel, Semaan, Marleine, Tanguy, Audrey, Torre, André, Tsonang, Jocelyne, Vaillant, Hervé, Yao, Edouard et Yiougo, Lydie.
2024.
« Économie circulaire en Afrique francophone : enjeux et défis ».
Coll. « Réalisation des ODD ».
Institut de la Francophonie pour le développement durable (IFDD). 252 p. Liu, Zhaoheng
Hussein, Mahmoud, Zhang, Youmin et Liu, Zhaoheng.
2024.
« Adaptive non-singular fast terminal sliding mode control for car-like vehicles with faded neighborhood information and actuator faults ».
Journal of Intelligent and Robotic Systems: Theory and Applications, vol. 110, nº 2.
Hussein, Mahmoud, Zhang, Youmin et Liu, Zhaoheng.
2024.
« Distributed fault-tolerant formation control design via high-order sliding mode for a team of car-like vehicles ».
IEEE Transactions on Intelligent Vehicles, vol. 9, nº 2.
pp. 4221-4231.
Vu, Viet-Hung, Liu, Zhaoheng et Thomas, Marc.
2024.
« Flexible robot dynamics and vibration: from analytical modeling to operational modal analysis ».
In 10th International Conference on Automation, Robotics, and Applications (ICARA) (Athens , Greece, Feb. 22-24, 2024)
IEEE.
Vu, Viet-Hung, Liu, Zhaoheng et Thomas, Marc.
2024.
« Vibration and modal analysis of a tonearm-cartridge system ».
In Proceedings of the 15th International Conference on Vibration Problems ICoVP 2023 (Doha, Qatar, Feb. 05-09, 2023)
Coll. « Lecture Notes in Mechanical Engineering »
pp. 125-136.
Singapore : Springer Nature Singapore.
Xing, Kanglin, Bonev, Ilian A., Champliaud, Henri et Liu, Zhaoheng.
2024.
« Optimizing dynamic measurement accuracy for machine tools and industrial robots with unscented Kalman filter and particle swarm optimization methods ».
Measurement Science and Technology, vol. 35, nº 8.
Xing, Kanglin, Bonev, Ilian A., Liu, Zhaoheng et Champliaud, Henri.
2024.
« Influence of machining parameters on dynamic errors in a hexapod machining cell ».
International Journal of Advanced Manufacturing Technology, vol. 131, nº 3-4.
pp. 1317-1334.
Xing, Kanglin, Mayer, J. R. R., Bonev, Ilian A., Champliaud, Henri et Liu, Zhaoheng.
2024.
« Evaluation of the positioning accuracy along helical paths using a telescoping ballbar ».
ASME Letters in Dynamic Systems and Control, vol. 4, nº 1.
Lê, Van Ngan
Nguyen, Huy Hoan, Champliaud, Henri et Le, Van Ngan.
2024.
« Effect of intermediate path on post-wrinkle initiation of the multi-pass metal spinning process: Analysis in the rotating reference frame ».
Journal of Manufacturing and Materials Processing, vol. 8, nº 1.
Monfet, Danielle
Beaulac, Arnaud, Lalonde, Timothé, Haillot, Didier et Monfet, Danielle.
2024.
« Energy modeling, calibration, and validation of a small-scale greenhouse using TRNSYS ».
Applied Thermal Engineering, vol. 248, nº part A.
Moosavi-Khoonsari, Elmira
Moosavi-Khoonsari, Elmira, Mostaghel, Sina et Siegmund, Andreas.
2024.
« Technology selection for slag zinc fuming process ».
In 10th International Conference on Lead and Zinc Processing (Lead-Zinc) (Changsha, China, Oct. 17-20, 2023)
Coll. « Journal of Physics : Conference Series », vol. 2738.
IOP Publishing. Morency, François
Beaugendre, H., Chan, A., Delmas, V., Loubère, R., Maire, P. H., Morency, F. et Vigier, T..
2024.
« Multidimensional aware subfaced-based Finite Volume scheme for the Eulerian droplet system of equation ».
Computers and Fluids, vol. 279.
Samad, Abdallah, Villeneuve, Eric, Morency, François, Béland, Mathieu et Lapalme, Maxime.
2024.
« A preliminary approach towards rotor icing modeling using the unsteady vortex lattice method ».
Drones, vol. 8, nº 2.
Nadeau, Sylvie
Bouche Noumbi, Emmanuel Jonathan, Hof, Lucas et Nadeau, Sylvie.
2024.
« Design of a manufacturing system using the customer journey mapping method: hybrid solar panel assembly (Manual-Automated-5.0), ».
In Congrès IISE 2024 = IISE Annual Conference & Expo 2024 (Montreal, QC, Canada, May 18-21, 2024)
Djefour, Djoher, Nadeau, Sylvie et Landau, Kurt. 2024. « Mise en application d’une analyse ergonomique couplée à une étude et une mesure du travail dans JACK 7.1 ». Communication lors de la conférence : 44e congrès de l’AQHSST : Fragilisation de la prévention au travail dans un contexte de pénurie : Défis et solutions (Valleyfield, QC, Canada, 22-24 mai 2024).
Karevan, Ali et Nadeau, Sylvie.
2024.
« A comprehensive STPA-PSO Framework for quantifying smart glasses risks in manufacturing ».
Heliyon, vol. 10, nº 9.
Karevan, Ali et Nadeau, Sylvie.
2024.
« FRAM effectiveness in the era of Industry 4.0: A dual perspective ».
In Congrès IISE 2024 = IISE Annual Conference & Expo 2024 (Montreal, QC, Canada, May 18-21, 2024)
Khan, Numan, Nadeau, Sylvie, Pham, Xuan-Tan et Boton, Conrad.
2024.
« Exploring associations between accident types and activities in construction using natural language processing ».
Automation in Construction, vol. 164.
Nadeau, S., Chénier, R. et Thériault, D..
2024.
« Jeune pousse deviendra grande : croire et se consacrer à l’excellence et l’innovation en SST ».
TD+ Votre travail durable, nº 1.
p. 19.
Nadeau, Sylvie, Bruder, Ralph et Hof, Lucas A..
2024.
« Utilisation de lunettes intelligentes dans l’assemblage/ désassemblage : État de l’art ».
TD+ Votre travail durable, nº 1.
pp. 21-27. Nadeau, Sylvie, Tahan, Antoine, Kenné, Jean-Pierre et Hof, Lucas A.. 2024. « Le désassemblage de produits : enjeux et perspectives ». Communication lors de la conférence : 44e congrès de l’AQHSST : Fragilisation de la prévention au travail dans un contexte de pénurie : Défis et solutions (Valleyfield, QC, Canada, 22-24 mai 2024).
Ribeiro, Benoit et Nadeau, Sylvie.
11 juin 2024.
« Exosquelettes des membres inférieurs : Qu’en savons-nous? ».
Substance ÉTS.
Ribeiro, Benoit et Nadeau, Sylvie.
11 juin 2024.
« Lower Limb Exoskeletons: What Do We Know About Them? ».
Substance ÉTS.
Thamsuwan, Ornwipa, Tuyêt Mai Ngô, Valérie, Tiaya Tedonchio, Christian et Nadeau, Sylvie.
2024.
« Redéfinir l'ergonomie dans la formation en ingénierie : Intégrer l'accessibilité et les outils numériques dans la conception en ingénierie ».
In Congrès de l’Association Canadienne de l’Éducation en Génie (Edmonton, AB, Canada, 15-19 juin 2024)
Association Canadienne de l’Éducation en Génie. Torres, Yaniel et Nadeau, Sylvie. 2024. « Contribution of the systems approach to quality management in manufacturing: The case of human error analysis in complex manual assembly ». Communication lors de la conférence : Congrès IISE 2024 = IISE Annual Conference & Expo 2024 (Montreal, QC, Canada, May 18-21, 2024). Valdesse Eko'Ola, Romuald, Nadeau, Sylvie et Landau, Kurt. 2024. « Vers une démarche d’aide au choix d’une technologie d’assistance visuelle ». Communication lors de la conférence : 44e congrès de l’AQHSST : Fragilisation de la prévention au travail dans un contexte de pénurie : Défis et solutions (Valleyfield, QC, Canada, 22-24 mai 2024). Petit, Yvan
Bouvette, V., Petit, Y., De Beaumont, L., Guay, S., Vinet, S.-A. et Wagnac, E..
2024.
« American football on-field head impact kinematics: Influence of acceleration signal characteristics on peak maximal principal strain ».
Annals of Biomedical Engineering.
Diotalevi, Lucien, Mac-Thiong, Jean-Marc et Petit, Yvan.
2024.
« Cerebrospinal fluid model formulation affects global and local behaviour of the spinal cord submitted to transverse traumatic compression ».
In Computer Methods in Biomechanics and Biomedical Engineering II :Selected Papers from the 18th International Symposium CMBBE 2023 (Paris, France, May 03-05, 2023)
Coll. « Lecture Notes in Computational Vision and Biomechanics », vol. 39.
pp. 113-120.
Springer Nature.
Qiao, Ningxin, Villemure, Isabelle, Wang, Zhi, Petit, Yvan et Aubin, Carl-Eric.
2024.
« Optimization of S2-alar-iliac screw (S2AI) fixation in adult spine deformity using a comprehensive genetic algorithm and finite element model personalized to patient geometry and bone mechanical properties ».
Spine Deformity.
Pham, Tan
Khan, Numan, Nadeau, Sylvie, Pham, Xuan-Tan et Boton, Conrad.
2024.
« Exploring associations between accident types and activities in construction using natural language processing ».
Automation in Construction, vol. 164.
Rousse, Daniel R.
Irandoostshahrestani, Misagh et Rousse, Daniel R..
2024.
« Status of photovoltaic water pumping systems in Iran: A comprehensive review ».
Water Science and Technology.
Saad, Maarouf
Diouf, Aminata, Belzile, Bruno, Saad, Maarouf et St-Onge, David.
2024.
« Spherical rolling robots—Design, modeling, and control: A systematic literature review ».
Robotics and Autonomous Systems, vol. 175.
Gordoniz, Jorge Esteban Salas, Saad, Maarouf et St-Onge, David.
2024.
« Intuitive physics-driven approach: Design and calibration of a flight controller for indoor blimps ».
In ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE) (Washington, DC, USA, Aug. 25-28)
ASME. Sanjosé, Marlène
Sirois, Julien, Sanjosé, Marlène, Sanchez, Fabian et Brailovski, Vladimir.
2024.
« Vortex-breakdown efficiency of planar regular grid structures—towards the development of design guidelines ».
Fluids, vol. 9, nº 2.
Songmene, Victor
Barakat, H., Zedan, Y., Samuel, A. M., Songmene, V. et Samuel, F. H..
2024.
« Parameters controlling drilling and tapping characteristics of aluminum based alloys ».
In Light Metals (Orlando, FL, USA, Mar. 03-07, 2024)
Coll. « Minerals, Metals and Materials Series »
pp. 313-325.
Springer.
Mateur, Wael, Songmene, Victor et Kouam, Jules.
2024.
« Experimental investigation on the effects of tool geometry and cutting conditions on machining behavior during edge finishing of granite using concave and chamfered profiling tools ».
Micromachines, vol. 15, nº 3.
Tahmasbi, Ali, Moungomo, Jean Brice Mandatsy, Samuel, Agnes M., Zedan, Yasser, Songmene, Victor et Samuel, Fawzy H..
2024.
« Role of Li and Sc additions and machining conditions on cutting forces on milling behavior of A7075-based alloys ».
Journal of Manufacturing and Materials Processing, vol. 8, nº 2.
Ullah, Irfan, Akinlabi, Esther Titilayo et Songmene, Victor.
2024.
« Thermo-metallo-mechanical based phase transformation modeling for high-speed milling of Ti–6Al–4V through stress-strain and temperature effects ».
Journal of Materials Research and Technology, vol. 30.
pp. 894-909. Soulaïmani, Azzeddine
Fahsi, Adil et Soulaimani, Azzeddine.
2024.
« A hierarchical level-set numerical approach for immiscible incompressible n-phase flows (n≥3) ».
Computers and Fluids, vol. 279.
St-Onge, David
Braga, Rafael Gomes, Varadharajan, Vivek Shankar, Beltrame, Giovanni et St-Onge, David.
2024.
« Swarming out of the lab: Comparing Relative Localization Methods for Collective Behavior ».
In Fourteenth International Conference on Swarm Intelligence (ANTS) (Konstanz, Germany, Oct. 09-11, 2024)
Brignol, Arnaud, Paas, Anita, Sotelo-Castro, Luis, St-Onge, David, Beltrame, Giovanni et Coffey, Emily B. J..
2024.
« Overcoming boundaries: Interdisciplinary challenges and opportunities in cognitive neuroscience ».
Neuropsychologia, vol. 200.
Diouf, Aminata, Belzile, Bruno, Saad, Maarouf et St-Onge, David.
2024.
« Spherical rolling robots—Design, modeling, and control: A systematic literature review ».
Robotics and Autonomous Systems, vol. 175.
Gordoniz, Jorge Esteban Salas, Saad, Maarouf et St-Onge, David.
2024.
« Intuitive physics-driven approach: Design and calibration of a flight controller for indoor blimps ».
In ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE) (Washington, DC, USA, Aug. 25-28)
ASME.
Heath, Megan, Imran, Ali et St-Onge, David.
2024.
« See as a bee : UV sensor for aerial strawberry crop monitoring ».
Canadian Journal of Remote Sensing, vol. 50, nº 1.
Heath, Megan, St-Onge, David et Hausler, Robert.
2024.
« UV reflectance in crop remote sensing: Assessing the current state of knowledge and extending research with strawberry cultivars ».
PLoS ONE, vol. 19, nº 3.
Tahan, Antoine
Bechara, Helene, Zemouri, Ryad, Kedjar, Bachir, Merkhouf, Arezki, Al-Haddad, Kamal et Tahan, Antoine.
2024.
« Non-invasive detection of rotor inter-turn short circuit in large hydrogenerators by using stray flux measurement combined with convolutional variational autoencoder analysis (CVAE) ».
IEEE Transactions on Industry Applications, vol. 60, nº 1.
pp. 196-205.
Benabdesselam, Abderraouf, Dollon, Quentin, Zemouri, Ryad, Pelletier, Francis, Gagnon, Martin et Tahan, Antoine.
2024.
« On the use of indirect measurements in virtual sensors for renewable energies: A review ».
Electronics, vol. 13, nº 8.
Chrétien, Antoine, Tahan, Antoine et Pelletier, Francis.
2024.
« Wind turbine blade damage evaluation under multiple operating conditions and based on 10-min SCADA data ».
Energies, vol. 17, nº 5.
Heddar, Mohamed Imad Eddine, Mehdi, Brahim, Matougui, Nedjoua, Tahan, Souheil Antoine et Jahazi, Mohammad.
2024.
« Adaptable multi-objective optimization framework: Application to metal additive manufacturing ».
International Journal of Advanced Manufacturing Technology, vol. 132, nº 3-4.
pp. 1897-1914.
Ibrahim, Rony, Zemouri, Ryad, Kedjar, Bachir, Merkhouf, Arezki, Tahan, Antoine, Al-Haddad, Kamal et Lafleur, François.
2024.
« Non-invasive detection of rotor inter-turn short circuit of a hydrogenerator using AI-based variational autoencoder ».
IEEE Transactions on Industry Applications, vol. 60, nº 1.
pp. 28-37.
Ibrahim, Rony, Zemouri, Ryad, Tahan, Antoine, Kedjar, Bachir, Merkhouf, Arezki et Al-Haddad, Kamal.
2024.
« Fault detection based on vibration measurements and variational autoencoder-desirability function ».
IEEE Open Journal of Industry Applications, vol. 5.
pp. 106-116.
Oliveira-Filho, Adaiton, Zemouri, Ryad, Pelletier, Francis et Tahan, Antoine.
2024.
« System condition monitoring based on a standardized latent space and the nataf transform ».
IEEE Access, vol. 12.
pp. 32637-32659. Thamsuwan, Ornwipa
Kapse, Siddhant, Wu, Ruoxuan et Thamsuwan, Ornwipa.
2024.
« Addressing ergonomic challenges in agriculture through AI-enabled posture classification ».
Applied Sciences, vol. 14, nº 2.
Thamsuwan, Ornwipa, Tuyêt Mai Ngô, Valérie, Tiaya Tedonchio, Christian et Nadeau, Sylvie.
2024.
« Redéfinir l'ergonomie dans la formation en ingénierie : Intégrer l'accessibilité et les outils numériques dans la conception en ingénierie ».
In Congrès de l’Association Canadienne de l’Éducation en Génie (Edmonton, AB, Canada, 15-19 juin 2024)
Association Canadienne de l’Éducation en Génie. Thomas, Marc
Vu, Viet-Hung, Liu, Zhaoheng et Thomas, Marc.
2024.
« Flexible robot dynamics and vibration: from analytical modeling to operational modal analysis ».
In 10th International Conference on Automation, Robotics, and Applications (ICARA) (Athens , Greece, Feb. 22-24, 2024)
IEEE.
Vu, Viet-Hung, Liu, Zhaoheng et Thomas, Marc.
2024.
« Vibration and modal analysis of a tonearm-cartridge system ».
In Proceedings of the 15th International Conference on Vibration Problems ICoVP 2023 (Doha, Qatar, Feb. 05-09, 2023)
Coll. « Lecture Notes in Mechanical Engineering »
pp. 125-136.
Singapore : Springer Nature Singapore. Voix, Jérémie
Avetissian, Tigran, Formosa, Fabien, Badel, Adrien, Delnavaz, Aidin et Voix, Jérémie.
2024.
« A novel piezoelectric energy harvester for earcanal dynamic motion exploitation using a bistable resonator cycled by coupled hydraulic valves made of collapsed flexible tubes ».
Micromachines, vol. 15, nº 3.
Demuynck, Michel, Delnavaz, Aidin et Voix, Jérémie.
2024.
« Morphological analysis of the human earcanal deformations during face-related activities ».
Applied Ergonomics, vol. 116.
Vu, Viet Hung
Vu, Viet-Hung, Liu, Zhaoheng et Thomas, Marc.
2024.
« Flexible robot dynamics and vibration: from analytical modeling to operational modal analysis ».
In 10th International Conference on Automation, Robotics, and Applications (ICARA) (Athens , Greece, Feb. 22-24, 2024)
IEEE.
Vu, Viet-Hung, Liu, Zhaoheng et Thomas, Marc.
2024.
« Vibration and modal analysis of a tonearm-cartridge system ».
In Proceedings of the 15th International Conference on Vibration Problems ICoVP 2023 (Doha, Qatar, Feb. 05-09, 2023)
Coll. « Lecture Notes in Mechanical Engineering »
pp. 125-136.
Singapore : Springer Nature Singapore. Wagnac, Éric
Bouvette, V., Petit, Y., De Beaumont, L., Guay, S., Vinet, S.-A. et Wagnac, E..
2024.
« American football on-field head impact kinematics: Influence of acceleration signal characteristics on peak maximal principal strain ».
Annals of Biomedical Engineering.
Melo, Luiz G. C., Dalaq, Ahmed S., Sgard, Franck, Doutres, Olivier, Legroux, Laurianne et Wagnac, Eric.
2024.
« Measurement of the local static mechanical pressure of earplugs ».
International Journal of Mechanical Sciences, vol. 275.
Zednik, Ricardo
Sirtoli, Vinicius, Morelli, Laura, Zednik, Ricardo J., Cowan, Glenn et Gagnon, Ghyslain.
2024.
« Motion artifact modeling of capacitive electrodes based on triboelectric nanogenerators ».
IEEE Transactions on Instrumentation and Measurement, vol. 73.
Zhang, Kun
Zhang, Kun, Saloux, Etienne et Candanedo, José A..
2024.
« Enhancing energy flexibility of building clusters via supervisory room temperature control: Quantification and evaluation of benefits ».
Energy and Buildings, vol. 302.
|