L'affiliation est "Génie mécanique"

Article publié dans une revue, révisé par les pairs

Abdalwhab, Abdalwhab Bakheet Mohamed, Beltrame, Giovanni et St-Onge, David. 2026. « Scalable multi-agent reinforcement learning framework for multi-machine tending ». IEEE Robotics and Automation Letters, vol. 11, nº 3. pp. 3135-3142.

Aboussafy, Charles, Brunetière, Noël et Guilbault, Raynald. 2026. « Numerical investigation of deep surface texture performance using a finite element solution of the 2D Navier-Stokes equations ». Journal of Tribology, vol. 148, nº 7.

Afkari, Parisa, Chouak, Mohamed, Cantin, Sébastien et Garnier, François. 2026. « Evaluating bypass effects of advanced turbofan engines on contrail formation using large eddy simulations ». Journal of Aircraft, vol. 63, nº 2.

Ait Ichou, Jamal, Morin-Roy, Fanny, Taillades, Werner, Haile, Hewan, Azzi, Feryel, Trudel, Dominique, Lerouge, Sophie et Soulez, Gilles. 2026. « Sclerosing and embolizing gel for venous embolization: Feasibility study in a porcine model ». Journal of Vascular and Interventional Radiology, vol. 37, nº 6.

Alakhdar, Mostafa, Vinches, Ludwig et Hallé, Stéphane. 2026. « Investigating thermal performance of 3D-printed cubic lattices integrated in bio-based nonwoven assemblies under wind exposure ». Progress in Engineering Science, vol. 3, nº 2.

Aleksandrovskiy, E., Lukashevich, K., Koshmin, A., Vasilyev, K., Komarov, R., Prokoshkin, S., Brailovski, V. et Sheremetyev, V.. 2026. « Three-roll four-stand hot longitudinal rolling of superelastic Ti-Zr-Nb alloy bars for orthopedic implants: finite element modeling and experimental study ». Modelling and Simulation in Materials Science and Engineering, vol. 34, nº 1.

Alsheghri, Ammar, Malaekah, Ahmed, Alhendawi, Abdulrahman, Tauheed, Mohd, El Bsat, Jana, Valchanov, Hristo, Brailovski, Vladimir et Guibault, François. 2026. « Elastic registration for non-destructive testing of additively manufactured TPMS lattice structures ». Journal of Nondestructive Evaluation, vol. 45, nº 2.

Arjona, Jessica de Carvalho, Sousa, Paulo Henrique, Demarquette, Nicole Raymonde et Valenzuela-Diaz, Francisco Rolando. 2026. « Transforming bentonite into high sorption capacity organoclays for gasoline, diesel, and kerosene ». Minerals, vol. 16, nº 1.
Compte des citations dans Scopus : 1.

Arslane, Mustapha, Slamani, Mohamed, Louhichi, Borhen et Chatelain, Jean-François. 2026. « A metrological framework for fixture-induced uncertainty quantification in dimensional inspection using bootstrap-validated genetic algorithm optimization ». Measurement: Journal of the International Measurement Confederation, vol. 262.

Assid, Morad, Gharbi, Ali, Kenné, Jean-Pierre et Takengny, Armel Leonel Kuegoua. 2026. « Stochastic production control of a closed-loop hybrid manufacturing-remanufacturing system considering greenhouse gas emissions ». Sustainability, vol. 18, nº 6.

Aydin, Mehmet, Ullah, Irfan et Songmene, Victor. 2026. « A systematic finite element-based methodology for predicting cutting forces in micro-milling of Al2024-T3 incorporating tool runout and chip flow direction ». Simulation Modelling Practice and Theory, vol. 150.

Basakayi, Joseph K., Tshitshonu, Eudes K., Rousse, Daniel R. et Ilinca, Adrian. 2026. « Dynamic multicriteria ranking of energy storage systems using a linear programming-based decision framework ». Journal of Energy Storage, vol. 161.

Beaudoin, Étienne J., Zednik, Ricardo J. et Demarquette, Nicole R.. 2026. « Solvent evaporation induces stiffening in caber and electrospinning of volatile polymer solutions ». Rheologica Acta.
(Sous presse)

Beaudoin, Étienne J., Zednik, Ricardo J. et Demarquette, Nicole R.. 2026. « Tuning polymer solution elasticity for electrospinning: Effects of molecular weight distribution and elastic doping ». Rheologica Acta.
(Sous presse)

Benabdesselam, Abderraouf, Gagnon, Martin et Tahan, Antoine. 2026. « Diagnostic of erosive cavitation in hydraulic turbines from indirect measurements using SCADA data with uncertainty quantification ». Results in Engineering, vol. 30.

Benazzouz, Lydia, Baiteche, Mounir, Morin, Jean-Benoît, Scott, Lemoine William, Bilitz, Elizabeth et Jahazi, Mohammad. 2026. « Influence of ingate design on macrosegregation severity in a large-size steel ingot ». International Journal of Advanced Manufacturing Technology.
(Sous presse)

Boniface Awatcha, W., Nadeau, S. et Hof, L.. 2026. « Towards a circular economy in automotive disassembly: Challenges, opportunities, and digital pathways for End-of-Life Vehicles ». Transactions of the Canadian Society for Mechanical Engineering.
(Sous presse)

Bouterra, Sami, Belamadi, Riyadh, Djemili, Abdelouaheb et Ilinca, Adrian. 2026. « Aerodynamic and aeroacoustic evaluation of slat and slot separation control on a small-scale HAWT: A computational study ». European Journal of Mechanics - B/Fluids, vol. 117.

Bouzid, Abdel-Hakim et Bouzid, Sofiane. 2026. « Comparative analysis of ASME B16.5 and EN 1092-1 welding neck flanges ». Journal of Pressure Vessel Technology, vol. 148, nº 2.

Bouzid, Abdel-Hakim et Choulaei, Mohammad. 2026. « Comparison of stresses in the junctions of shell structures with bolted flange rings ». International Journal of Pressure Vessels and Piping, vol. 219, nº Part A.

Cadena-Zarate, Cristian, Tucci, Ilaria, Scalla, Dario Della, Garcia, Jersson, Crouzier, Maurine, Cambron, Phillipe, Carreau, Michel, Rousse, Daniel R. et Ilinca, Adrian. 2026. « Renewable energy optimization in isolated microgrids: A Python-based tool for cost-effective solutions using genetic algorithms ». Energy Conversion and Management: X, vol. 30.

Campion, Donatien, Kreitcberg, Alena et Brailovski, Vladimir. 2026. « Simulation-based training of multi-material machine learning models for the prediction of melt pool dimensions and as-printed densities in laser powder fed fusion parts ». International Journal of Advanced Manufacturing Technology.
(Sous presse)

Carillo, Kévin, Sgard, Franck, Dazel, Olivier et Doutres, Olivier. 2026. « Improving low-frequency attenuation of passive earplugs using Helmholtz resonators ». Journal of the Acoustical Society of America, vol. 159, nº 4. pp. 3702-3712.

Cartmell, Christopher, Naseri, Emad, Kerr, Russell G., Hurnik, Daniel, Martin, Chelsea et Ahmadi, Ali. 2026. « Biopierces: Drug-eluting ear tags for infection prevention in animal tagging ». Frontiers in Veterinary Science, vol. 12.

Catar, Louis, Tabiai, Ilyass et St-Onge, David. 2026. « Polymer micro-lattice buffer structure free impact absorption ». Proceedings of the Institution of Mechanical Engineers, Part C : Journal of Mechanical Engineering Science.
(Sous presse)

Cianyi, Yannick, Bonev, Ilian A., Liu, Zhaoheng et Champliaud, Henri. 2026. « Closed-form solutions to the direct kinematics of a family of 3-XPS parallel mechanisms ». Journal of Mechanisms and Robotics, vol. 18, nº 4.

Croteau, Emilie, Wagnac, Eric, Gallant, Juliette, Binet, Audrey-Anne, Camara, Maée et Corbin-Berrigan, Laurie-Ann. 2026. « Head impacts in university-level varsity cheerleading athletes: an exploratory study ». Frontiers in Sports and Active Living, vol. 8.

Delbari, Seyed Ali et Hof, Lucas A.. 2026. « Mechanisms of progressive degradation in ion-exchanged boroaluminosilicate glass: A comparative study ». Journal of Non-Crystalline Solids, vol. 682.

Delbari, Seyed Ali, Leclair, Jean-Philippe, Villeneuve, Guillaume et Hof, Lucas A.. 2026. « High-quality freeform machining of chemically strengthened glass using spark assisted chemical engraving ». Results in Engineering, vol. 29.
Compte des citations dans Scopus : 1.

Dionne, Antoine, Magnuson, David S. K., Richard-Denis, Andréane, Bernard, Francis, Barthélémy, Dorothy, Petit, Yvan et Mac-Thiong, Jean-Marc. 2026. « Effects of early acute in-bed leg cycling initiated from the intensive care unit following severe traumatic spinal cord injury: Final results from the PROMPT-SCI trial ». Critical Care, vol. 30, nº 1.

Durand, Sullivan, Neveu, Pierre, Rousse, Daniel R. et Haillot, Didier. 2026. « Finite dimension thermodynamics-based preliminary design of multi-energy pumped thermal energy storage systems ». Applied Thermal Engineering, vol. 289, nº part 1.

Fahsi, Adil et Soulaimani, Azzeddine. 2026. « A semi-implicit, second-order time-integration scheme for surface tension modeling in two-dimensional capillary-dominated two-phase flows ». Computers and Fluids, vol. 304.

Fattah, Rachid, Benjelloun, Khalid, Kenné, Jean-Pierre et Chebak, Ahmed. 2026. « Robust fixed-time sliding-mode control for a class of nonlinear systems with an electro-hydraulic active suspension case study ». ISA Transactions.
(Sous presse)

Fattah, Rachid, Kenne, Jean-Pierre, Benjelloun, Khalid et Chebak, Ahmed. 2026. « Fixed-time constraint-aware sliding-mode control for ride comfort enhancement in active vehicle suspensions ». IEEE Open Journal of Vehicular Technology, vol. 7. 1337–1350.

Forma, Loïc, Rouard, Kévin, Doutres, Olivier, Sgard, Franck, Nélisse, Hugues, Quagebeur, Nicolas, Boileau, Loïc et Padois, Thomas. 2026. « Virtualization-based acoustic imaging for low-frequency source localization ». Journal of Sound and Vibration, vol. 623.

Gabriel, Julie, Petit, Yvan, Rosi, Giuseppe, Wagnac, Éric, Dagher, Michel, Dubory, Arnaud, Flouzat-Lachaniette, Charles-Henri et Haïat, Guillaume. 2026. « Impact-Based Analysis Method (IBAM) to evaluate the primary stability of the pedicle screw: A proof of concept ». Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine.
(Sous presse)

Gnonhoue, George, David, Éric, Voix, Jérémie et Tabiai, Ilyass. 2026. « Hybrid flexible dry electrodes for electroencephalography: Electrical and thermo-mechanical properties ». Journal of Applied Polymer Science, vol. 143, nº 8.

Gnonhoue, George, Tabiai, Ilyass, Voix, Jérémie et David, Éric. 2026. « Electrical and thermo-mechanical properties of styrene-ethylene-butylene-styrene/carbon nanotube and styrene-ethylene-butylene-styrene/carbon black multipin electrodes for electroencephalography ». Sensors and Actuators, A: Physical, vol. 399.

Guner, Bugrahan, Baykara, Mehmet Z. et Dagdeviren, Omur E.. 2026. « Insight into the Ehrlich–Schwoebel barrier via three-dimensional atomic force microscopy mapping of surface potentials on Au (111) ». Communications Materials, vol. 7, nº 1.

Haddouche, Mohamed, Ilinca, Adrian et Chaouch, Mounir. 2026. « Enhancing energy efficiency in the wood furniture sector through industry 4.0: Real-time implementation and case study ». Energy Technology, vol. 14, nº 1.
Compte des citations dans Scopus : 1.

Hammouda, Camelia Ait, Benallal, Abdellah, Bradai, Rafik et Ilinca, Adrian. 2026. « Advanced virtual impedance for power-sharing improvement in microgrids using different SOGI methods: A comparative study ». Energy Technology.
(Sous presse)

Hamouda, Inès, Da Rocha Moreau, Maïlys, Basso, Lisa, Trombotto, Stéphane, Montembault, Alexandra, David, Laurent et Lerouge, Sophie. 2026. « Towards tunable mechanical properties of in situ gelling chitosan hydrogels: Impact of macromolecular structure including pattern of acetylation ». Carbohydrate Polymers, vol. 373.
Compte des citations dans Scopus : 3.

Hu, Stephane W., Marchal, Guilhem, Dilem, Yvan, Walch, Denis et Tabiai, Ilyass. 2026. « Planar validation of speckle pattern optimization for large-scale 3D streamlined structures in stereo digital image correlation using anamorphic transformation ». Optics and Lasers in Engineering, vol. 202.

Imran, Ali, Varadharajan, Vivek Shankar, Braga, Rafael Gomes, Beltrame, Giovanni et St-Onge, David. 2026. « Swarm robotics localization: comparing methods from infrared to foundation models ». Swarm Intelligence, vol. 20, nº 1.

Jose, Sagar, Nguyen, Khanh T. P., Medjaher, Kamal, Zemouri, Ryad, Levesque, Melanie et Tahan, Antoine. 2026. « A modular deep learning methodology for multi-fault machine health diagnostics from sparse and imbalanced multimodal data ». Neurocomputing, vol. 666.
Compte des citations dans Scopus : 1.

Kamil, Hamza, Soulaïmani, Azzeddine et Beljadid, Abdelaziz. 2026. « A comprehensive analysis of physics-informed neural networks for solving one-way coupled problems ». Computers and Mathematics with Applications, vol. 212. pp. 166-189.

Karevan, Ali et Nadeau, Sylvie. 2026. « Integrating smart glasses and smart gloves in hybrid assembly/disassembly systems: an STPA-driven semi-automated risk management tool ». Robotics and Computer-Integrated Manufacturing, vol. 100.

Karimi, Samira, Helal, Emna, Pinto, Gabriel Matheus, Gutierrez, Giovanna, Moghimian, Nima, Vello, Tatiana Parra, Fechine, Guilhermino José Macêdo, David, Eric et Demarquette, Nicole. 2026. « Effect of few-layer graphene (FLG) and relative photodegradation depth on the ductile to fragile transition of high-density polyethylene ». Journal of Applied Polymer Science, vol. 143, nº 7.
Compte des citations dans Scopus : 1.

Kaveh, Kianoosh, Barati, Mansoor, Jahazi, Mohammad et Moosavi-Khoonsari, Elmira. 2026. « Kinetics and mechanisms of corrosion in magnesia–carbon refractories by chromium-oxide-containing calcium aluminate slag ». Ceramics International, vol. 52, nº 14, Part C. 26358–26371.

Kenfack, Patrik, Kahou, Samira Ebrahimi et Aïvodji, Ulrich. 2026. « Towards fair in-context learning with tabular foundation models ». Transactions on Machine Learning Research, vol. 2026.

Kheirani, Afsaneh, Tabiai, Ilyass et St-Onge, David. 2026. « Vehicle envelope with lightweight ultrafilm for minimal leakage (VELUM) ». Aerospace Science and Technology, vol. 174.

Khirani, Hemza, Slamani, Mohamed, Bonev, Ilian, Stepanenko, Oleksandr, Tahan, Antoine, Louhichi, Borhen et Alawad, Mohamad A.. 2026. « Cost-effective metrological evaluation and statistical modeling of thermal and payload effects on industrial robot repeatability ». Measurement: Journal of the International Measurement Confederation, vol. 278.

Kusekar, Sambhaji, Dhondapure, Prashant, Jahazi, Mohammad, Ahsan, Showmik, Young, Henry et Borkar, Tushar. 2026. « Microstructural evolution and high-temperature deformation behavior of wire arc additively manufactured Inconel 718 forging Preforms: Toward a hybrid additive–forging process ». Journal of Materials Research and Technology, vol. 40. pp. 1364-1380.
Compte des citations dans Scopus : 1.

Landau, Kurt et Nadeau, Sylvie. 2026. « Case study on the assessment effort of the Key Indicator Method for Awkward Body Postures (KIM-ABP) ». Open Journal of Safety Science and Technology.
(Sous presse)

Le Vot, Roxane, Léger, Pauline, Petit, Yvan, Corbin-Berrigan, Laurie-Ann, Proust, Edouard et Wagnac, Eric. 2026. « Laboratory-based comparison of ice hockey helmet performance using sex-representatives headform sizes ». Annals of Biomedical Engineering.
(Sous presse)

Leclercq, Aurore, Mouret, Thibault et Brailovski, Vladimir. 2026. « Effect of heat treatments on the microstructure and mechanical properties of a laser powder fused Ti–6Al–2Sn–4Zr–6Mo alloy at room and elevated temperatures: a preliminary study ». Progress in Additive Manufacturing, vol. 11, nº 5. pp. 5115-5126.

Lemaire, R. et Menanteau, S.. 2026. « Assessment of the predictive ability of standard and refined laser-induced incandescence models against experimental databases from the literature – A benchmarking analysis of commonly used modeling approaches ». Journal of Aerosol Science, vol. 192.

Liu, Hui, Zhu, Jicheng, Li, Hengtai, Desrosiers, Christian et Zhang, Caiming. 2026. « Imaging coupled filtering: A unified multi-channel framework for multimodal medical image registration and fusion ». Signal Processing, vol. 243.

Marcil-St-Onge, Gabriel, Chandoul, Abdelberi, Pelletier, Roger, Kreitcberg, Alena et Demers, Vincent. 2026. « Influence of feedstock characteristics and printing parameters on material extrusion additive manufacturing of aluminum-based powder-binder mixtures ». Transactions of the Canadian Society for Mechanical Engineering, vol. 50.

Merlo, L. S., Kadem, L., Saleh, W., Ng, H. D. et Di Labbio, G.. 2026. « Experimental investigation of twin pulsed jets in a hemispheric elastic cavity ». Physical Review Fluids, vol. 11, nº 5.

Metcheka Kengne, Igor Gildas, Delmas, Vincent et Soulaimani, Azzeddine. 2026. « Calibration of Manning's roughness coefficients for shallow-water flows on complex bathymetries using optimization algorithms and surrogate neural network models ». Computers and Fluids, vol. 304.
Compte des citations dans Scopus : 1.

Mirabi, Hamed, Mirakhorli, Fatemeh, Béland, Jean-François, Nadeau, François, Demers, Vincent et Bocher, Philippe. 2026. « Toward homogeneous microstructure and mechanical properties in WAAM-fabricated H13 tool steel: Effect of interpass and tempering temperatures ». International Journal of Advanced Manufacturing Technology.
(Sous presse)

Mortazavinejad, Seyyed Mohsen, Vinches, Ludwig et Hallé, Stephane. 2026. « Thermal resistance analysis of cold-protective clothing using numerical modeling: Influence of natural-based nonwoven fabric structure and wind flow conditions ». International Communications in Heat and Mass Transfer, vol. 173.
Compte des citations dans Scopus : 2.

Mouret, Thibault, Leclercq, Aurore, Dubois, Patrick K. et Brailovski, Vladimir. 2026. « Improving surface roughness and printability of LPBF Ti6246 components without affecting their structure, mechanical properties and building rate ». Metals, vol. 16, nº 1.
Compte des citations dans Scopus : 1.

Muhammed, Musa, Javidani, Mousa, Heidari, Majid, Levasseur, Tom et Jahazi, Mohammad. 2026. « Influence of deposition temperature on the microstructure, wear and corrosion behaviour of AlTiN/AlTiCrN ceramic coatings on A8 tool steel ». Ceramics International.
(Sous presse)

Muhammed, Musa, Javidani, Mousa, Heidari, Majid, Levasseur, Tom et Jahazi, Mohammad. 2026. « Influence of substrate surface finish on the wear and corrosion behaviour of AlTiN/AlTiCrN coatings ». Tribology Letters, vol. 74, nº 1.

Muhammed, Musa, Javidani, Mousa, Sadrabadi, Tahere Ebrahimi, Heidari, Majid, Levasseur, Tom et Jahazi, Mohammad. 2026. « A comparative wear analysis of tool steels: An evaluation based on ASTM G65 and G195 testing methods ». Journal of Materials Engineering and Performance, vol. 35, nº 6. pp. 5749-5769.
Compte des citations dans Scopus : 2.

Nasrabadi, Mohamadreza Azar, Beauregard, Yvan et Ekhlassi, Amir. 2026. « A consumer-centric framework for measuring product obsolescence using user-generated content and large language models: Evidence from IoT devices ». IEEE Transactions on Engineering Management, vol. 73. pp. 448-466.
Compte des citations dans Scopus : 2.

Nasrollah, Seyyed Ahmad Seyyed, MacNevin, Wyatt, Madadian, Elias, Dunlop, Matthew J., Acharya, Bishnu, Lerouge, Sophie et Ahmadi, Ali. 2026. « Oxidized nanocrystalline cellulose-alginate filaments as pH-responsive bioink for 3D and 4D bioprinting ». Transactions of the Canadian Society for Mechanical Engineering, vol. 50.

Ouaknine-Beaulieu, Gabriel, Zhang, Xinyi, Pillet, Charles, Voix, Jérémie, Bouserhal, Rachel et Giard, Pascal. 2026. « Enabling personalized communication with advanced hearing protection devices: Integrating and evaluating concepts of a radio acoustical virtual environment ». Journal of the Acoustical Society of America, vol. 159, nº 3. pp. 1762-1775.

Poissenot-Arrigoni, Bastien, Doutres, Olivier, Negrini, Alessia, Berbiche, Djamal et Sgard, Franck. 2026. « Analysis of the functional and acoustical comfort of earplugs experienced by a group of workers in Canadian companies and identification of the influencing variables ». Safety Science, vol. 196.

Radan, Lida, Samuel, Agnes M., Songmene, Victor et Samuel, Fawzy H.. 2026. « Observations on the effects of Cu, Sc, Ti and Zr addition on precipitation in Al-Li-based alloys ». Journal of Materials Engineering and Performance.
(Sous presse)

Rahman, Md Sazzadur, Helal, Emna et Demarquette, Nicole R.. 2026. « Recent advances in metal-organic framework-integrated nanocomposite hydrogels for sensors and sensing systems ». SmartMat, vol. 7, nº 1.
Compte des citations dans Scopus : 3.

Rasouli-Jouryabi, Saleh et Moosavi-Khoonsari, Elmira. 2026. « Coupled experimental study and thermodynamic modeling of GeO2 and GeO2–CaO and GeO2–SiO2 binary systems ». Journal of the American Ceramic Society, vol. 109, nº 2.

Renaud, Phillipe, Brailovski, Vladimir et Demers, Vincent. 2026. « Laser drilling of effusion holes: Process optimization and quality control using industrial micro-computed tomography ». Precision Engineering, vol. 99. pp. 501-515.

Rodger, Melanie, Poirier, Élisabeth, Wasmer, Elise, Touani, Francesco K., Lerouge, Sophie et Ahmadi, Ali. 2026. « Enhancing the stability of albumin foam-based support baths using pectin for embedded bioprinting ». Biomedical Materials, vol. 21, nº 1.

Roemer, Julien, Bisulandu, Baby-Jean Robert Mungyeko, Rousse, Daniel R., Pellerin, Marc, Bozorg, Mokhtar et Ilinca, Adrian. 2026. « Energy consumption, decarbonization pathways, and renewable energy integration in the mining industry: A system-level review ». Energies, vol. 19, nº 8.

Sawalmeh, Atef, Zitoune, Redouane, Crouzeix, Laurent, Navarro, Pablo, Marguet, Steven, Chandra Shekar, Arjun, Hof, Lucas A., Villa, Luiz et Giasin, Khaled. 2026. « Review on composite bonding repairs: Scientific challenges on machining, surface preparation, and structural health monitoring ». Composites Part B: Engineering, vol. 323.

Selami, Salim, Ataya, Sabbah, Karmi, Yacine, Debbah, Younes, Guilbault, Raynald, Khan, Rashid et Boumediri, Haithem. 2026. « Hybrid IGWO-DNN approach for bearing fault diagnosis using time domain features from empirical mode decomposition ». International Journal of Advanced Manufacturing Technology.
Compte des citations dans Scopus : 1. (Sous presse)

Slamani, Mohamed, Chatelain, Jean-François et Jammel, Siwar. 2026. « Comprehensive analysis of lubricant and nanofiller contributions to surface roughness control in drilling of GFRP composites ». Journal of Composites Science, vol. 10, nº 2.

Soul, Hugo, Brailovski, Vladimir et Yawny, Alejandro. 2026. « Mechanical behaviour and damage assessment of AlSi10Mg lattice structures fabricated by laser powder bed fusion under static and fatigue loading ». Mechanics of Materials, vol. 212.

Sripada, Jagannadh, Thibault, Alexis, Hof, Lucas, Bocher, Philippe, Béland, Jean-François, Vo, Phuong et Irissou, Éric. 2026. « Influence of pulsed laser ablation parameters on adhesion of cold spray Al 6061 coatings on extruded Al 6061 substrates ». Journal of Thermal Spray Technology.
(Sous presse)

Sylvain, William, Lalonde, Timothé, Monfet, Danielle et Haillot, Didier. 2026. « Standardised framework for analysis of greenhouse performance using key performance indicators ». Agricultural Systems, vol. 231.
Compte des citations dans Scopus : 1.

Tayefi, Masoud, Eesaee, Mostafa, Hassanipour, Meysam, Elkoun, Said, David, Eric et Nguyen-Tri, Phuong. 2026. « Optimizing mechanical and electrical performance in EPDM composites for spacer dampers: A balanced approach via carbon black ratio and protective waxes ». Macromolecular Materials and Engineering, vol. 311, nº 3.

Tofighi, Ali, Zhu, Linbo et Bouzid, Abdel-Hakim. 2026. « Elastic interaction in bolted flange joints during hot bolting and disassembly ». Journal of Pressure Vessel Technology, vol. 148, nº 1.
Compte des citations dans Scopus : 1.

Toutlini, Nour-Eddine, Beljadid, Abdelaziz et Soulaimani, Azzeddine. 2026. « A semi-implicit finite element method for modeling fertilizer transport through soils with root water and nutrient uptake ». Mathematics and Computers in Simulation, vol. 248. 514–538.

Toutlini, Nour-Eddine, Soulaïmani, Azzeddine et Beljadid, Abdelaziz. 2026. « JAX-WSPM: A GPU-accelerated parallel framework based on the JAX library for modeling water flow and solute transport in unsaturated porous media using an implicit finite element method ». Computer Physics Communications, vol. 318.
Compte des citations dans Scopus : 1.

Tran, Mai-Van, Champliaud, Henri, Liu, Zhaoheng, Elizalde, Sergio et Jahazi, Mohammad. 2026. « Wrinkle suppression in metal spinning using Flanged-Edge blanks: Experiments and finite element analysis ». International Journal of Advanced Manufacturing Technology, vol. 142, nº 9-10. pp. 4509-4528.

Ullah, Irfan, Akinlabi, Esther T., Aydin, Mehmet et Songmene, Victor. 2026. « Numerical analysis of cyclic residual stress induced by thermo-mechanical loads in high-speed milling of TC4 titanium alloy ». Machining Science and Technology.
(Sous presse)

Valtierra, S., Samuel, A. M., Songmene, V. et Samuel, F. H.. 2026. « Enhancing the hardness and impact energies of Al-Si-Cu-Mg cast alloys: Role of casting conditions ». International Journal of Metalcasting.
(Sous presse)

Vincent, Maxime, Engelbrecht, Akira, Gaudreau, Marc-André, Legrand, Mathias, Dupont, Thomas et Marcotte, Pierre. 2026. « Biodynamic responses of the human hand-arm system under nail gun shock vibration and differences between males and females ». International Journal of Industrial Ergonomics, vol. 113.

Xing, Kanglin, Bonev, Ilian A., Liu, Zhaoheng et Champliaud, Henri. 2026. « Error-compensated dual-robot coordinated milling of circular parts via orthogonal-axis decomposition ». International Journal of Precision Engineering and Manufacturing, vol. 27, nº 6. pp. 2297-2316.

Xing, Kanglin, Mayer, J. R. R., Cianyi, Yannick, Bonev, Ilian A., Liu, Zhaoheng et Champliaud, Henri. 2026. « Optimization of robotic machining through circular path error compensation ». Robotics and Computer-Integrated Manufacturing, vol. 101.

Zannou, Junior, Monfet, Danielle, Martin, Gilbert Larochelle et Haillot, Didier. 2026. « Adapting building stock archetype methodology for greenhouse stock characterisation ». Energy and Buildings, vol. 357.

Chapitre de livre

Helal, Emna et Demarquette, Nicole R.. 2026. « Recyclability of carbon nanomaterials-based conductive polymer composites ». In Comprehensive Polymer Science. Second Edition. Coll. « Reference module in materials science and materials engineering ». pp. 422-447. Elsevier.

Article de revue ou de magazine, non révisé par les pairs

Beauséjour, Marie-Hélène, Wagnac, Éric et Petit, Yvan. 17 janvier 2026. « Une nouvelle technologie pour mieux évaluer les blessures de la moelle épinière chez les femmes et les personnes âgées ». The Conversation.

Affiche

Chevassus, Guilhem, Gibout, Stéphane, Giard-Laliberté, Charlotte, Chauvette, Sam et Haillot, Didier. 2026. « État des connaissances sur les serres nordiques ». Affiche numéro 22 présentée lors de la conférence : 46e colloque annuel du Centre d'études nordiques (Québec, QC, Canada, 12-13 fév. 2026).

Menguy, Emile, Haillot, Didier et Gibout, Stéphane. 2026. « Amélioration du contrôle d’un système de stockage à base de lit de roche dans une serre à Kuujjuaq, Nunavik ». Affiche numéro 55 présentée lors de la conférence : 46e colloque annuel du Centre d'études nordiques (Québec, QC, Canada, 12-13 fév. 2026).

Communication

Nadeau, Sylvie. 2026. « Incidences de l’IA sur le travail de conseiller à la prévention en SST ». Communication lors de la conférence : 46e congrès annuel AQHSST (Québec, QC, Canada, 16-17 avril 2026).

Nadeau, Sylvie, Desbiens, Eric, Cami, Julie et Millet, Christian. 2026. « Panel : Humain, technologie et prévention : trouver l’équilibre ». Communication lors de la conférence : 46e congrès annuel AQHSST (Québec, QC, Canada, 16-17 avril 2026).

Ngô, Valérie Tuyêt Mai et Nadeau, Sylvie. 2026. « Les méthodes d’analyses systématiques des risques, applicables au travail numérisé en équipe ». Communication lors de la conférence : 46e congrès annuel AQHSST (Québec, QC, Canada, 16-17 avril 2026).

Sylvain, William, Haillot, Didier et Gibout, Sylvain. 2026. « Agrivoltaïque : valoriser l’énergie solaire pour des serres plus efficaces ». Communication lors de la conférence : Colloque du Réseau québécois sur l'énergie intelligente (RQEI) : Stocker, convertir, optimiser - L'énergie dans tous ses états! (Trois-Rivières, QC, Canada, 11 mai 2026).

Youcefbrahim, Ansar et Nadeau, Sylvie. 2026. « Postes assis-debout vs exosquelette passifs de soutien des membres inférieurs: une comparaison conceptuelle pour l’amélioration ergonomique en assemblage ». Communication lors de la conférence : 46e congrès annuel AQHSST (Québec, QC, Canada, 16-17 avril 2026).

Brevet

Pintat, Valentin, Voix, Jérémie, Crétot-Richert, Gabrielle, Viallet, Guilhem et Delnavaz, Aidin (inventeurs) 4 février 2026. « In-ear and around-the-ear electroencephalography system with floating electrodes and method thereof ». École de technologie supérieure (titulaire(s)). Brevet européen EP 4072418.