L'affiliation est "Génie mécanique"

2026

Abdalwhab, Abdalwhab Bakheet Mohamed, Beltrame, Giovanni et St-Onge, David. 2026. « Scalable multi-agent reinforcement learning framework for multi-machine tending ». IEEE Robotics and Automation Letters, vol. 11, nº 3. pp. 3135-3142.

Aboussafy, Charles, Brunetière, Noël et Guilbault, Raynald. 2026. « Numerical investigation of deep surface texture performance using a finite element solution of the 2D Navier-Stokes equations ». Journal of Tribology, vol. 148, nº 7.

Arjona, Jessica de Carvalho, Sousa, Paulo Henrique, Demarquette, Nicole Raymonde et Valenzuela-Diaz, Francisco Rolando. 2026. « Transforming bentonite into high sorption capacity organoclays for gasoline, diesel, and kerosene ». Minerals, vol. 16, nº 1.
Compte des citations dans Scopus : 1.

Arslane, Mustapha, Slamani, Mohamed, Louhichi, Borhen et Chatelain, Jean-François. 2026. « A metrological framework for fixture-induced uncertainty quantification in dimensional inspection using bootstrap-validated genetic algorithm optimization ». Measurement: Journal of the International Measurement Confederation, vol. 262.

Beaudoin, Étienne J., Zednik, Ricardo J. et Demarquette, Nicole R.. 2026. « Solvent evaporation induces stiffening in caber and electrospinning of volatile polymer solutions ». Rheologica Acta.
(Sous presse)

Beaudoin, Étienne J., Zednik, Ricardo J. et Demarquette, Nicole R.. 2026. « Tuning polymer solution elasticity for electrospinning: Effects of molecular weight distribution and elastic doping ». Rheologica Acta.
(Sous presse)

Beauséjour, Marie-Hélène, Wagnac, Éric et Petit, Yvan. 17 janvier 2026. « Une nouvelle technologie pour mieux évaluer les blessures de la moelle épinière chez les femmes et les personnes âgées ». The Conversation.

Benazzouz, Lydia, Baiteche, Mounir, Morin, Jean-Benoît, Scott, Lemoine William, Bilitz, Elizabeth et Jahazi, Mohammad. 2026. « Influence of ingate design on macrosegregation severity in a large-size steel ingot ». International Journal of Advanced Manufacturing Technology.
(Sous presse)

Bouterra, Sami, Belamadi, Riyadh, Djemili, Abdelouaheb et Ilinca, Adrian. 2026. « Aerodynamic and aeroacoustic evaluation of slat and slot separation control on a small-scale HAWT: A computational study ». European Journal of Mechanics - B/Fluids, vol. 117.

Bouzid, Abdel-Hakim et Bouzid, Sofiane. 2026. « Comparative analysis of ASME B16.5 and EN 1092-1 welding neck flanges ». Journal of Pressure Vessel Technology, vol. 148, nº 2.

Bouzid, Abdel-Hakim et Choulaei, Mohammad. 2026. « Comparison of stresses in the junctions of shell structures with bolted flange rings ». International Journal of Pressure Vessels and Piping, vol. 219, nº Part A.

Cadena-Zarate, Cristian, Tucci, Ilaria, Scalla, Dario Della, Garcia, Jersson, Crouzier, Maurine, Cambron, Phillipe, Carreau, Michel, Rousse, Daniel R. et Ilinca, Adrian. 2026. « Renewable energy optimization in isolated microgrids: A Python-based tool for cost-effective solutions using genetic algorithms ». Energy Conversion and Management: X, vol. 30.

Campion, Donatien, Kreitcberg, Alena et Brailovski, Vladimir. 2026. « Simulation-based training of multi-material machine learning models for the prediction of melt pool dimensions and as-printed densities in laser powder fed fusion parts ». International Journal of Advanced Manufacturing Technology.
(Sous presse)

Cartmell, Christopher, Naseri, Emad, Kerr, Russell G., Hurnik, Daniel, Martin, Chelsea et Ahmadi, Ali. 2026. « Biopierces: Drug-eluting ear tags for infection prevention in animal tagging ». Frontiers in Veterinary Science, vol. 12.

Catar, Louis, Tabiai, Ilyass et St-Onge, David. 2026. « Polymer micro-lattice buffer structure free impact absorption ». Proceedings of the Institution of Mechanical Engineers, Part C : Journal of Mechanical Engineering Science.
(Sous presse)

Chevassus, Guilhem, Gibout, Stéphane, Giard-Laliberté, Charlotte, Chauvette, Sam et Haillot, Didier. 2026. « État des connaissances sur les serres nordiques ». Affiche numéro 22 présentée lors de la conférence : 46e colloque annuel du Centre d'études nordiques (Québec, QC, Canada, 12-13 fév. 2026).

Cianyi, Yannick, Bonev, Ilian A., Liu, Zhaoheng et Champliaud, Henri. 2026. « Closed-form solutions to the direct kinematics of a family of 3-XPS parallel mechanisms ». Journal of Mechanisms and Robotics, vol. 18, nº 4.

Croteau, Emilie, Wagnac, Eric, Gallant, Juliette, Binet, Audrey-Anne, Camara, Maée et Corbin-Berrigan, Laurie-Ann. 2026. « Head impacts in university-level varsity cheerleading athletes: an exploratory study ». Frontiers in Sports and Active Living, vol. 8.

Delbari, Seyed Ali, Leclair, Jean-Philippe, Villeneuve, Guillaume et Hof, Lucas A.. 2026. « High-quality freeform machining of chemically strengthened glass using spark assisted chemical engraving ». Results in Engineering, vol. 29.

Durand, Sullivan, Neveu, Pierre, Rousse, Daniel R. et Haillot, Didier. 2026. « Finite dimension thermodynamics-based preliminary design of multi-energy pumped thermal energy storage systems ». Applied Thermal Engineering, vol. 289, nº part 1.

Fahsi, Adil et Soulaimani, Azzeddine. 2026. « A semi-implicit, second-order time-integration scheme for surface tension modeling in two-dimensional capillary-dominated two-phase flows ». Computers and Fluids, vol. 304.

Forma, Loïc, Rouard, Kévin, Doutres, Olivier, Sgard, Franck, Nélisse, Hugues, Quagebeur, Nicolas, Boileau, Loïc et Padois, Thomas. 2026. « Virtualization-based acoustic imaging for low-frequency source localization ». Journal of Sound and Vibration, vol. 623.

Gnonhoue, George, David, Éric, Voix, Jérémie et Tabiai, Ilyass. 2026. « Hybrid flexible dry electrodes for electroencephalography: Electrical and thermo-mechanical properties ». Journal of Applied Polymer Science, vol. 143, nº 8.

Gnonhoue, George, Tabiai, Ilyass, Voix, Jérémie et David, Éric. 2026. « Electrical and thermo-mechanical properties of styrene-ethylene-butylene-styrene/carbon nanotube and styrene-ethylene-butylene-styrene/carbon black multipin electrodes for electroencephalography ». Sensors and Actuators, A: Physical, vol. 399.

Guner, Bugrahan, Baykara, Mehmet Z. et Dagdeviren, Omur E.. 2026. « Insight into the Ehrlich–Schwoebel barrier via three-dimensional atomic force microscopy mapping of surface potentials on Au (111) ». Communications Materials, vol. 7, nº 1.

Haddouche, Mohamed, Ilinca, Adrian et Chaouch, Mounir. 2026. « Enhancing energy efficiency in the wood furniture sector through industry 4.0: Real-time implementation and case study ». Energy Technology, vol. 14, nº 1.

Hammouda, Camelia Ait, Benallal, Abdellah, Bradai, Rafik et Ilinca, Adrian. 2026. « Advanced virtual impedance for power-sharing improvement in microgrids using different SOGI methods: A comparative study ». Energy Technology.
(Sous presse)

Hamouda, Inès, Da Rocha Moreau, Maïlys, Basso, Lisa, Trombotto, Stéphane, Montembault, Alexandra, David, Laurent et Lerouge, Sophie. 2026. « Towards tunable mechanical properties of in situ gelling chitosan hydrogels: Impact of macromolecular structure including pattern of acetylation ». Carbohydrate Polymers, vol. 373.
Compte des citations dans Scopus : 3.

Imran, Ali, Varadharajan, Vivek Shankar, Braga, Rafael Gomes, Beltrame, Giovanni et St-Onge, David. 2026. « Swarm robotics localization: comparing methods from infrared to foundation models ». Swarm Intelligence, vol. 20, nº 1.

Jose, Sagar, Nguyen, Khanh T. P., Medjaher, Kamal, Zemouri, Ryad, Levesque, Melanie et Tahan, Antoine. 2026. « A modular deep learning methodology for multi-fault machine health diagnostics from sparse and imbalanced multimodal data ». Neurocomputing, vol. 666.
Compte des citations dans Scopus : 1.

Karevan, Ali et Nadeau, Sylvie. 2026. « Integrating smart glasses and smart gloves in hybrid assembly/disassembly systems: an STPA-driven semi-automated risk management tool ». Robotics and Computer-Integrated Manufacturing, vol. 100.

Karimi, Samira, Helal, Emna, Pinto, Gabriel Matheus, Gutierrez, Giovanna, Moghimian, Nima, Vello, Tatiana Parra, Fechine, Guilhermino José Macêdo, David, Eric et Demarquette, Nicole. 2026. « Effect of few-layer graphene (FLG) and relative photodegradation depth on the ductile to fragile transition of high-density polyethylene ». Journal of Applied Polymer Science, vol. 143, nº 7.

Kenfack, Patrik, Kahou, Samira Ebrahimi et Aïvodji, Ulrich. 2026. « Towards fair in-context learning with tabular foundation models ». Transactions on Machine Learning Research, vol. 2026.

Kheirani, Afsaneh, Tabiai, Ilyass et St-Onge, David. 2026. « Vehicle envelope with lightweight ultrafilm for minimal leakage (VELUM) ». Aerospace Science and Technology, vol. 174.

Kusekar, Sambhaji, Dhondapure, Prashant, Jahazi, Mohammad, Ahsan, Showmik, Young, Henry et Borkar, Tushar. 2026. « Microstructural evolution and high-temperature deformation behavior of wire arc additively manufactured Inconel 718 forging Preforms: Toward a hybrid additive–forging process ». Journal of Materials Research and Technology, vol. 40. pp. 1364-1380.

Lemaire, R. et Menanteau, S.. 2026. « Assessment of the predictive ability of standard and refined laser-induced incandescence models against experimental databases from the literature – A benchmarking analysis of commonly used modeling approaches ». Journal of Aerosol Science, vol. 192.

Liu, Hui, Zhu, Jicheng, Li, Hengtai, Desrosiers, Christian et Zhang, Caiming. 2026. « Imaging coupled filtering: A unified multi-channel framework for multimodal medical image registration and fusion ». Signal Processing, vol. 243.

Menguy, Emile, Haillot, Didier et Gibout, Stéphane. 2026. « Amélioration du contrôle d’un système de stockage à base de lit de roche dans une serre à Kuujjuaq, Nunavik ». Affiche numéro 55 présentée lors de la conférence : 46e colloque annuel du Centre d'études nordiques (Québec, QC, Canada, 12-13 fév. 2026).

Metcheka Kengne, Igor Gildas, Delmas, Vincent et Soulaimani, Azzeddine. 2026. « Calibration of Manning's roughness coefficients for shallow-water flows on complex bathymetries using optimization algorithms and surrogate neural network models ». Computers and Fluids, vol. 304.

Mirabi, Hamed, Mirakhorli, Fatemeh, Béland, Jean-François, Nadeau, François, Demers, Vincent et Bocher, Philippe. 2026. « Toward homogeneous microstructure and mechanical properties in WAAM-fabricated H13 tool steel: Effect of interpass and tempering temperatures ». International Journal of Advanced Manufacturing Technology.
(Sous presse)

Mortazavinejad, Seyyed Mohsen, Vinches, Ludwig et Hallé, Stephane. 2026. « Thermal resistance analysis of cold-protective clothing using numerical modeling: Influence of natural-based nonwoven fabric structure and wind flow conditions ». International Communications in Heat and Mass Transfer, vol. 173.

Mouret, Thibault, Leclercq, Aurore, Dubois, Patrick K. et Brailovski, Vladimir. 2026. « Improving surface roughness and printability of LPBF Ti6246 components without affecting their structure, mechanical properties and building rate ». Metals, vol. 16, nº 1.

Muhammed, Musa, Javidani, Mousa, Heidari, Majid, Levasseur, Tom et Jahazi, Mohammad. 2026. « Influence of substrate surface finish on the wear and corrosion behaviour of AlTiN/AlTiCrN coatings ». Tribology Letters, vol. 74, nº 1.

Nasrabadi, Mohamadreza Azar, Beauregard, Yvan et Ekhlassi, Amir. 2026. « A consumer-centric framework for measuring product obsolescence using user-generated content and large language models: Evidence from IoT devices ». IEEE Transactions on Engineering Management, vol. 73. pp. 448-466.
Compte des citations dans Scopus : 2.

Nasrollah, Seyyed Ahmad Seyyed, MacNevin, Wyatt, Madadian, Elias, Dunlop, Matthew J., Acharya, Bishnu, Lerouge, Sophie et Ahmadi, Ali. 2026. « Oxidized nanocrystalline cellulose-alginate filaments as pH-responsive bioink for 3D and 4D bioprinting ». Transactions of the Canadian Society for Mechanical Engineering, vol. 50.

Ouaknine-Beaulieu, Gabriel, Zhang, Xinyi, Pillet, Charles, Voix, Jérémie, Bouserhal, Rachel et Giard, Pascal. 2026. « Enabling personalized communication with advanced hearing protection devices: Integrating and evaluating concepts of a radio acoustical virtual environment ». Journal of the Acoustical Society of America, vol. 159, nº 3. pp. 1762-1775.

Pintat, Valentin, Voix, Jérémie, Crétot-Richert, Gabrielle, Viallet, Guilhem et Delnavaz, Aidin (inventeurs) 4 février 2026. « In-ear and around-the-ear electroencephalography system with floating electrodes and method thereof ». École de technologie supérieure (titulaire(s)). Brevet européen EP 4072418.

Poissenot-Arrigoni, Bastien, Doutres, Olivier, Negrini, Alessia, Berbiche, Djamal et Sgard, Franck. 2026. « Analysis of the functional and acoustical comfort of earplugs experienced by a group of workers in Canadian companies and identification of the influencing variables ». Safety Science, vol. 196.

Radan, Lida, Samuel, Agnes M., Songmene, Victor et Samuel, Fawzy H.. 2026. « Observations on the effects of Cu, Sc, Ti and Zr addition on precipitation in Al-Li-based alloys ». Journal of Materials Engineering and Performance.
(Sous presse)

Rahman, Md Sazzadur, Helal, Emna et Demarquette, Nicole R.. 2026. « Recent advances in metal-organic framework-integrated nanocomposite hydrogels for sensors and sensing systems ». SmartMat, vol. 7, nº 1.

Rasouli-Jouryabi, Saleh et Moosavi-Khoonsari, Elmira. 2026. « Coupled experimental study and thermodynamic modeling of GeO2 and GeO2–CaO and GeO2–SiO2 binary systems ». Journal of the American Ceramic Society, vol. 109, nº 2.

Renaud, Phillipe, Brailovski, Vladimir et Demers, Vincent. 2026. « Laser drilling of effusion holes: Process optimization and quality control using industrial micro-computed tomography ». Precision Engineering, vol. 99. pp. 501-515.

Rodger, Melanie, Poirier, Élisabeth, Wasmer, Elise, Touani, Francesco K., Lerouge, Sophie et Ahmadi, Ali. 2026. « Enhancing the stability of albumin foam-based support baths using pectin for embedded bioprinting ». Biomedical Materials, vol. 21, nº 1.

Selami, Salim, Ataya, Sabbah, Karmi, Yacine, Debbah, Younes, Guilbault, Raynald, Khan, Rashid et Boumediri, Haithem. 2026. « Hybrid IGWO-DNN approach for bearing fault diagnosis using time domain features from empirical mode decomposition ». International Journal of Advanced Manufacturing Technology.
(Sous presse)

Slamani, Mohamed, Chatelain, Jean-François et Jammel, Siwar. 2026. « Comprehensive analysis of lubricant and nanofiller contributions to surface roughness control in drilling of GFRP composites ». Journal of Composites Science, vol. 10, nº 2.

Soul, Hugo, Brailovski, Vladimir et Yawny, Alejandro. 2026. « Mechanical behaviour and damage assessment of AlSi10Mg lattice structures fabricated by laser powder bed fusion under static and fatigue loading ». Mechanics of Materials, vol. 212.

Sripada, Jagannadh, Thibault, Alexis, Hof, Lucas, Bocher, Philippe, Béland, Jean-François, Vo, Phuong et Irissou, Éric. 2026. « Influence of pulsed laser ablation parameters on adhesion of cold spray Al 6061 coatings on extruded Al 6061 substrates ». Journal of Thermal Spray Technology.
(Sous presse)

Sylvain, William, Lalonde, Timothé, Monfet, Danielle et Haillot, Didier. 2026. « Standardised framework for analysis of greenhouse performance using key performance indicators ». Agricultural Systems, vol. 231.

Tayefi, Masoud, Eesaee, Mostafa, Hassanipour, Meysam, Elkoun, Said, David, Eric et Nguyen-Tri, Phuong. 2026. « Optimizing mechanical and electrical performance in EPDM composites for spacer dampers: A balanced approach via carbon black ratio and protective waxes ». Macromolecular Materials and Engineering, vol. 311, nº 3.

Tofighi, Ali, Zhu, Linbo et Bouzid, Abdel-Hakim. 2026. « Elastic interaction in bolted flange joints during hot bolting and disassembly ». Journal of Pressure Vessel Technology, vol. 148, nº 1.

Toutlini, Nour-Eddine, Soulaïmani, Azzeddine et Beljadid, Abdelaziz. 2026. « JAX-WSPM: A GPU-accelerated parallel framework based on the JAX library for modeling water flow and solute transport in unsaturated porous media using an implicit finite element method ». Computer Physics Communications, vol. 318.

Tran, Mai-Van, Champliaud, Henri, Liu, Zhaoheng, Elizalde, Sergio et Jahazi, Mohammad. 2026. « Wrinkle suppression in metal spinning using Flanged-Edge blanks: Experiments and finite element analysis ». International Journal of Advanced Manufacturing Technology, vol. 142, nº 9-10. pp. 4509-4528.

Vincent, Maxime, Engelbrecht, Akira, Gaudreau, Marc-André, Legrand, Mathias, Dupont, Thomas et Marcotte, Pierre. 2026. « Biodynamic responses of the human hand-arm system under nail gun shock vibration and differences between males and females ». International Journal of Industrial Ergonomics, vol. 113.

Zannou, Junior, Monfet, Danielle, Martin, Gilbert Larochelle et Haillot, Didier. 2026. « Adapting building stock archetype methodology for greenhouse stock characterisation ». Energy and Buildings, vol. 357.