| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Liste des publications de "Champliaud, Henri"Nombre de documents archivés : 156. 2024
Nguyen, Huy Hoan, Champliaud, Henri et Le, Van Ngan.
2024.
« Effect of intermediate path on post-wrinkle initiation of the multi-pass metal spinning process: Analysis in the rotating reference frame ».
Journal of Manufacturing and Materials Processing, vol. 8, nº 1.
Xing, Kanglin, Bonev, Ilian A., Liu, Zhaoheng et Champliaud, Henri.
2024.
« Influence of machining parameters on dynamic errors in a hexapod machining cell ».
International Journal of Advanced Manufacturing Technology, vol. 131, nº 3-4.
pp. 1317-1334.
Xing, Kanglin, Mayer, J. R. R., Bonev, Ilian A., Champliaud, Henri et Liu, Zhaoheng.
2024.
« Evaluation of the positioning accuracy along helical paths using a telescoping ballbar ».
ASME Letters in Dynamic Systems and Control, vol. 4, nº 1.
2023
Dhondapure, Prashant, Tize Mha, Pierre, Nayak, Soumyaranjan, Ebacher, Lea, Dourandish, Simin, Champliaud, Henri, Morin, Jean -Benoit et Jahazi, Mohammad.
2023.
« Influence of deformation path on the stress state and damage evolution along the central axis of a large size forged ingot of AISI H13 steel ».
Journal of Materials Research and Technology, vol. 27.
pp. 8244-8257.
Javidikia, Mahshad, Sadeghifar, Morteza, Champliaud, Henri et Jahazi, Mohammad.
2023.
« Grain size and temperature evolutions during linear friction welding of Ni-base superalloy Waspaloy: Simulations and experimental validations ».
Journal of Advanced Joining Processes, vol. 8.
Lévesque, Jean-Benoît, Baillargeon, Carlo, Paquet, Daniel, Lanteigne, Jacques et Champliaud, Henri.
2023.
« Characterizing and modeling transformation-induced plasticity in 13Cr-4Ni welds upon cooling ».
Materials, vol. 16, nº 22.
Salazar, Gamaliel, Lemyre-Baron, Jean-Sébastien, Jahazi, Mohammad, Champliaud, Henri et Tahan, Antoine.
2023.
« Analysis of industrial quenching (air transfer + oil immersion) and the cooling regimes after immersion ».
In Heat Treat 2023: Proceedings of the 32nd ASM Heat Treating Society Conference (Detroit, MI, USA, Oct. 17-19, 2023)
pp. 106-113.
ASM International. Xing, Kanglin, Bonev, Ilian A., Liu, Zhaoheng et Champliaud, Henri. 2023. « Ballbar applications for machining and non-machining setups in a hexapod-based machining cell ». Communication lors de la conférence : Canadian Society for Mechanical Engineering International Congress - Computational Fluid Dynamics Canada International Congress CSME - CFD-SC2023 (Sherbrooke, QC, Canada, May 28-31, 2023). 2022
Deschênes, P. A., Wheeler, R., Paquet, D., Lanteigne, J., Serventi, A. M., Tôn-Thât, L. et Champliaud, H..
2022.
« Micromechanical properties of low-carbon martensitic stainless steel by microtensile experiments ».
Materials Science and Engineering: A, vol. 858.
Dourandish, Simin, Champliaud, Henri, Morin, Jean -Benoit et Jahazi, Mohammad.
2022.
« Microstructure-based finite element modeling of a martensitic stainless steel during hot forging ».
International Journal of Advanced Manufacturing Technology, vol. 123, nº 7-8.
pp. 2833-2851.
Pham, Minh-Nha, Champliaud, Henri, Liu, Zhaoheng et Bonev, Ilian A..
2022.
« Parameterized finite element modeling and experimental modal testing for vibration analysis of an industrial hexapod for machining ».
Mechanism and Machine Theory, vol. 167.
Vedaei-Sabegh, Ali, Morin, Jean-Benoît, Champliaud, Henri et Jahazi, Mohammad.
2022.
« Influence of thermally grown oxides on interfacial friction during hot deformation of large-size forging ingots ».
Journal of Materials Research and Technology, vol. 21.
pp. 3412-3424. 2021
Bouissa, Yassine, Zorgani, Muftah, Shahriari, Davood, Champliaud, Henri, Morin, Jean-Benoît et Jahazi, Mohammad.
2021.
« Microstructure-based FEM modeling of phase transformation during quenching of large-size steel forgings ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 52, nº 5.
pp. 1883-1900.
Brodeur, Samuel, Le, Van Ngan et Champliaud, Henri.
2021.
« A nonlinear finite-element analysis tool to prevent rupture of power transformer tank ».
Sustainability, vol. 13, nº 3.
Paradis, P. Y. et Champliaud, H..
2021.
« New correlations for heat transfer in parallel-plate ducts at low Peclet number ».
International Journal of Heat and Mass Transfer, vol. 178.
2020
Bouissa, Y., Bohlooli, N., Shahriari, D., Champliaud, H., Morin, J. B. et Jahazi, M..
2020.
« FEM modeling and experimental validation of quench-induced distortions of large size steel forgings ».
Journal of Manufacturing Processes, vol. 58.
pp. 592-605.
Lévesque, J. B., Lanteigne, J., Champliaud, H. et Paquet, D..
2020.
« Modeling solid-state phase transformations of 13Cr-4Ni steels in welding heat-affected zone ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 51, nº 3.
pp. 1208-1220.
Nguyen, Huy Hoan, Champliaud, Henri et Lê, Van Ngan.
2020.
« Circumferential cracking in conventional metal spinning process ».
In 32nd European Modeling and Simulation Symposium (EMSS) (En ligne, Sept. 16-18, 2020)
pp. 165-170.
Dime University of Genoa.
Sarafan, Sheida, Wanjara, Priti, Levesque, Jean-Benoit, Gholipour, Javad, Champliaud, Henri et Mathieu, Louis.
2020.
« Through-thickness residual stresses, microstructure, and mechanical properties of electron beam-welded CA6NM martensitic stainless steel after postweld heat treatment ».
Advances in Materials Science and Engineering, vol. 2020.
2019
Bouissa, Yassine, Shahriari, Davood, Champliaud, Henri et Jahazi, Mohammad.
2019.
« Prediction of heat transfer coefficient during quenching of large size forged blocks using modeling and experimental validation ».
Case Studies in Thermal Engineering, vol. 13.
Fall, A., Monajati, H., Khodabandeh, A., Fesharaki, M. H., Champliaud, H. et Jahazi, M..
2019.
« Local mechanical properties, microstructure, and microtexture in friction stir welded Ti-6Al-4V alloy ».
Materials Science and Engineering: A, vol. 749.
pp. 166-175.
Gendron, Mathieu, Hazel, Bruce, Boudreault, Eric, Champliaud, Henri et Pham, Xuan-Tan.
2019.
« Coupled thermo-electromagnetic model of a new robotic high-frequency local induction heat treatment system for large steel components ».
Applied Thermal Engineering, vol. 150.
pp. 372-385.
Sarafan, Sheida, Wanjara, Priti, Lévesque, Jean-Benoît, Gholipour, Javad, Champliaud, Henri et Mathieu, Louis.
2019.
« Residual stresses, microstructure, and mechanical properties of EB-Welded 90-mm-Thick UNS S41500 martensitic stainless steel after PWHT ».
Materials Performance and Characterization, vol. 8, nº 4.
pp. 648-663. 2018
Bertrand, Samuel, Shahriari, Davood, Jahazi, Mohammad et Champliaud, Henri.
2018.
« Linear friction welding process simulation of Ti-6Al-4V alloy: a heat transfer analysis of the conditioning phase ».
In 17th International Conference on Metal Forming (Metal Forming) (Toyohashi, Japan, Sept. 16-19, 2018)
Coll. « Procedia Manufacturing », vol. 15.
pp. 1382-1390.
Netherlands : Elsevier B.V..
Champliaud, Henri, Vieillot, Valentin, Provencher, David et Lê, Ngan Van.
2018.
« Rapid 3D shape forming computation with piecewise heating lines using a fifth order spline formulation ».
In 30th European Modeling and Simulation Symposium (EMSS 2018) (Budapest , Hungary, Sept. 17-19, 2018)
pp. 204-209.
Dime University of Genoa.
Nguyen, Hoan Huy, Champliaud, Henri et Lê, Van Ngan.
2018.
« Dynamic finite element modeling of metal spinning process with a stationary mandrel and a rotating tool ».
In 30th European Modeling and Simulation Symposium (EMSS 2018) (Budapest , Hungary, Sept. 17-19, 2018)
pp. 91-96.
Dime University of Genoa. 2017Bouissa, Yassine, Champliaud, Henri, Jahazi, Mohammad, Lapierre-Boire, Louis-Philippe, Morin, Jean-Benoît et Poulain, Nicolas. 2017. « Modeling heterogeneities effects on phase transformation during quenching of large size forged steel ingots ». Communication lors de la conférence : 14th U.S. National Congress on Computational Mechanics (USNCCM) (Montreal, QC, Canada, July 17-20, 2017).
Curtat, Jean-Loup, Lanteigne, Jacques, Champliaud, Henri, Liu, Zhaoheng et Lévesque, Jean-Benoît.
2017.
« Influence of hammer peening on fatigue life of E309L steel used for 13%Cr-4%Ni blade runner repairs ».
International Journal of Fatigue, vol. 100.
pp. 68-77.
Feng, Zhengkun, Champliaud, Henri et Mathieu, Louis.
2017.
« Investigations of a reconfigurable pressing setup for manufacturing blades of large francis turbines runners from very thick plates ».
In 29th European Modeling and Simulation Symposium (EMSS) (Barcelona, Spain, Sept. 18-20, 2017)
pp. 212-220.
CAL-TEK S.r.l..
Gendron, Mathieu, Hazel, Bruce, Boudreault, Eric, Champliaud, Henri et Pham, Xuan-Tan.
2017.
« Modeling circular inductors coupled to a semi-infinite magnetic medium considering the proximity effect ».
Journal of Electromagnetic Waves and Applications, vol. 31, nº 13.
pp. 1232-1254.
Ghafarizadeh, Seyedbehzad, Tahvilian, Amir Masoud, Chatelain, Jean-François, Liu, Zhaoheng, Champliaud, Henri et Lebrun, Gilbert.
2017.
« Numerical simulation of ball-end milling with SPH method ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 1.
pp. 401-408.
Luk-Cyr, Jacques, El-Bawab, Rayan, Champliaud, Henri, Lanteigne, Jacques et Vadean, Aurelian.
2017.
« Sequential approximate optimization of industrial hammer peening using finite element simulations ».
Structural and Multidisciplinary Optimization, vol. 55, nº 3.
pp. 767-778.
Luk-Cyr, Jacques, Paquet, Daniel, Lanteigne, Jacques, Champliaud, Henri et Vadean, Aurelian.
2017.
« A unified plasticity methodology for rate- and temperature-sensitive alloys exhibiting a non-linear kinematic hardening behavior ».
Acta Mechanica Solida Sinica, vol. 30, nº 1.
pp. 27-37.
Sarafan, S., Wanjara, P., Gholipour, J., Champliaud, H. et Mathieu, L..
2017.
« Mechanical properties of electron beam welds in heavy-section UNS S41500 martensitic stainless steel ».
International Journal of Advanced Manufacturing Technology, vol. 91, nº 9/12.
pp. 4141-4150.
Sarafan, Sheida, Wanjara, Priti, Gholipour, Javad, Champliaud, Henri et Mathieu, Louis.
2017.
« Mehanical properties of electron beam welded joints in thick gage CA6NM stainless steel ».
Journal of Materials Engineering and Performance, vol. 26, nº 10.
pp. 4768-4780. 2016
Champliaud, Henri, Feng, Zhengkun, Provencher, David, Tousignant, Danick et Gholipour, Javad.
2016.
« Piecewise fifth order spline interpolation for line heating forming process ».
In ASME International Mechanical Engineering Congress and Exposition (IMECE2016) (Phoenix, AZ, USA, Nov. 11-17, 2016)
ASME.
Gendron, Mathieu, Boudreault, Éric, Hazel, Bruce, Pham, Xuan-Tan et Champliaud, Henri.
2016.
« Non-linear optimization of a new robotic induction process for local heat treatment using thermal finite element analysis ».
International Journal of Advanced Manufacturing Technology, vol. 84, nº 5.
pp. 1013-1029.
Luk-Cyr, Jacques, El-Bawab, Rayan, Lanteigne, Jacques, Champliaud, Henri et Vadean, Aurelian.
2016.
« Mechanical properties of 75% Ar /25% CO2 flux-cored arc welded E309L austenitic stainless steel ».
Materials Science and Engineering A, vol. 678.
pp. 197-203.
Saboori, M., Champliaud, H., Gholipour, J., Gakwaya, A., Savoie, J. et Wanjara, P..
2016.
« Extension of flow stress-strain curves of aerospace alloys after necking ».
International Journal of Advanced Manufacturing Technology, vol. 83, nº 1-4.
pp. 313-323.
Saboori, M., Gholipour, J., Champliaud, H., Wanjara, P., Gakwaya, A. et Savoie, J..
2016.
« Prediction of burst pressure in multistage tube hydroforming of aerospace alloys ».
Journal of Engineering for Gas Turbines and Power, vol. 138, nº 8.
Salem, Jamel, Champliaud, Henri, Feng, Zhengkun et Dao, Thien-My.
2016.
« Experimental analysis of an asymmetrical three-roll bending process ».
International Journal of Advanced Manufacturing Technology, vol. 83, nº 9.
pp. 1823-1833.
Sarafan, S., Lévesque, J.-B., Wanjara, P., Gholipour, J. et Champliaud, H..
2016.
« Distortion and residual stresses in electron beam-welded hydroelectric turbine materials ».
Science and Technology of Welding and Joining, vol. 21, nº 6.
pp. 473-478.
Sarafan, S., Wanjara, P., Gholipour, J. et Champliaud, H..
2016.
« Global and local characteristics of an autogenous single pass electron beam weld in thick gage UNS S41500 steel ».
Materials Science and Engineering: A, vol. 666.
pp. 360-371.
Tahvilian, Amir Masoud, Hazel, Bruce, Rafieian, Farzad, Liu, Zhaoheng et Champliaud, Henri.
2016.
« Force model for impact cutting grinding with a flexible robotic tool holder ».
International Journal of Advanced Manufacturing Technology, vol. 85, nº 1.
pp. 133-147. 2015
Feng, Zhengkun et Champliaud, Henri.
2015.
« Modeling and simulation based on finite element method for electron beam welding process ».
In 27th European Modeling and Simulation Symposium (EMSS) (Bergeggi, Italy, Sept. 21-23, 2015)
pp. 79-83.
Dime University of Genoa.
Feng, Zhengkun et Champliaud, Henri.
2015.
« Modeling and simulation for pressing process with reconfigurable punch and die ».
In ASME 2015 Pressure Vessels and Piping Conference (Boston, MA, USA, July 19-23, 2015)
Coll. « ASME Proceedings »
American Society of Mechanical Engineers.
Saboori, M., Gholipour, J., Champliaud, H., Gakwaya, A., Wanjara, P. et Savoie, J..
2015.
« Prediction of burst pressure in multi stage tube hydroforming of aerospace alloys ».
In ASME Turbo Expo 2015: Turbine Technical Conference and Exposition (GT 2015) (Montreal, QC, Canada, June 15-19, 2015)
American Society of Mechanical Engineers (ASME).
Sarafan, S., Wanjara, P., Champliaud, Henri et Thibault, D..
2015.
« Characteristics of an autogenous single pass electron beam weld in thick gage CA6NM steel ».
International Journal of Advanced Manufacturing Technology, vol. 78, nº 9.
pp. 1523-1535.
Tahvilian, Amir Masoud, Liu, Zhaoheng, Champliaud, Henri, Hazel, Bruce et Lagacé, Marin.
2015.
« Characterization of grinding wheel grain topography under different robotic grinding conditions using confocal microscope ».
International Journal of Advanced Manufacturing Technology, vol. 80, nº 5.
pp. 1159-1171. 2014
Farimani, S. Mojarad, Gholipour, J., Champliaud, Henri, Savoie, J. et Wanjara, P..
2014.
« Numerical and experimental study of preforming stage in tube hydroforming ».
In Material Forming ESAFORM 2014 (Espoo, Finland, May 7-9, 2014)
Coll. « Key Engineering Materials », vol. 611-612.
pp. 1132-1138.
Trans Tech Publications Ltd.
Feng, Zhengkun et Champliaud, Henri.
2014.
« Analyses of profile radial-axial ring rolling process based on explicit finite element method ».
In American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Anaheim, CA, USA, July 20-24, 2014)
American Society of Mechanical Engineers (ASME).
Feng, Zhengkun et Champliaud, Henri.
2014.
« FEM analysis of radial-axial profile ring rolling process ».
In 26th European Modeling and Simulation Symposium, EMSS 2014 (Bordeaux, France, Sept. 10-12, 2014)
pp. 295-300.
Dime University of Genoa.
Feng, Zhengkun et Champliaud, Henri.
2014.
« Using pyramidal three-roll bending process to improve the quality of seemed cylinders ».
In ASME 2013 International Mechanical Engineering Congress and Exposition : November 15-21, 2013, San Diego, California, USA. (San Diego, CA, USA, Nov. 15-21, 2013 )
New York, NY, USA : ASME.
Lê, Van Ngan et Champliaud, Henri.
2014.
« Safety factor of welded-plate beams based on finite element linear buckling analysis ».
In Proceedings of the IASTED International Conference on Modelling, Simulation and Identification, MSI 2014 (Banff, AB, Canada, July 16-18, 2014)
pp. 51-57.
Acta Press.
Mojarad, S., Champliaud, H., Gholipour, J., Savoie, J. et Wanjara, P..
2014.
« Load path optimization in tube hydroforming ».
Canadian Aeronautics and Space Journal = Journal Aéronautique et Spatial du Canada, vol. 60, nº 3.
pp. 82-89.
Saboori, M., Champliaud, Henri, Gholipour, J., Gakwaya, A., Savoie, J. et Wanjara, P..
2014.
« Evaluating the flow stress of aerospace alloys for tube hydroforming process by free expansion testing ».
International Journal of Advanced Manufacturing Technology, vol. 72, nº 9-12.
pp. 1275-1286.
Sarafan, Sheida, Wanjara, Priti, Champliaud, Henri, Thibault, Denis et Mathieu, Louis.
2014.
« Evaluation of electron beam welded AISI 415 stainless steel ».
In ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014)
American Society of Mechanical Engineers (ASME).
Tran, Hoang Quan, Champliaud, Henri, Feng, Zhengkun et Dao, Thien-My.
2014.
« Dynamic FE analysis for reducing the flat areas of formed shapes obtained by roll bending process ».
In ASME 2013 International Mechanical Engineering Congress and Exposition : November 15-21, 2013, San Diego, California, USA. (San Diego, CA, USA, Nov. 15-21, 2013 )
New York, NY, USA : ASME.
Tran, Quan Hoang, Champliaud, Henri, Feng, Zhengkun et Dao, Thien My.
2014.
« FE study for reducing forming forces and flat end areas of cylindrical shapes obtained by the roll-bending process ».
Journal of Mechanics Engineering and Automation, vol. 4, nº 6.
pp. 467-475.
Tran, Quan Hoang, Champliaud, Henri, Feng, Zhengkun et Dao, Thien-My.
2014.
« Analysis of the asymmetrical roll bending process through dynamic FE simulations and experimental study ».
International Journal of Advanced Manufacturing Technology, vol. 75, nº 5-8.
pp. 1233-1244. 2013
Feng, Zhengkun et Champliaud, Henri.
2013.
« FEM analysis of mecano-welding process for manufacturing cylinders ».
In Sheet Metal 2013 (Belfast, Ireland, Mar. 25-27, 2013)
Coll. « Key Engineering Materials », vol. 549.
pp. 444-451.
Trans Tech Publications Ltd.
Feng, Zhengkun et Champliaud, Henri.
2013.
« Modeling and simulation of hot radial-axial ring rolling process for producing power plant parts ».
In Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013)
pp. 677-686.
Warrendale, PA, USA : Association for Iron and Steel Technology.
Feng, Zhengkun et Champliaud, Henri.
2013.
« Modelling and simulation of radial ring rolling process based on finite element analyses ».
In American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013)
New York, NY, USA : American Society of Mechanical Engineers.
Feng, Zhengkun, Champliaud, Henri, Mathieu, Louis et Sabourin, Michel.
2013.
« Modeling and simulation of optimal blank design and hot pressing process for manufacturing large francis turbines blades from very thick plates ».
In American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013)
New York, NY, USA : American Society of Mechanical Engineers.
Feng, Zhengkun, Champliaud, Henri, Mathieu, Louis, Sabourin, Michel et Lê, Van Ngan.
2013.
« Investigation of pressing process for large and thick blades of Francis turbines ».
In Congrès français de mécanique 2013 : du 26 au 30 août 2013 Bordeaux (Bordeaux, France, Aug. 26-30, 2013)
Association Française de Mécanique.
Feng, Zhengkun, Champliaud, Henri, Sabourin, Michel et Morin, Sebastien.
2013.
« Optimal blank design based on finite element method for blades of large Francis turbines ».
Simulation Modelling Practice and Theory, vol. 36.
pp. 11-21.
Gendron, Mathieu, Boudreault, Eric, Hazel, Bruce, Champliaud, Henri et Pham, Tan.
2013.
« Temperature profile optimization in a new robotic local induction heat treatment process ».
In Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013)
pp. 766-773.
Warrendale, PA, USA : Association for Iron and Steel Technology.
Kassab, Rabih, Champliaud, Henri, Bocher, Philippe, Lanteigne, Jacques et Lê, Van Ngan.
2013.
« Strain variations of AISI 4340 steel undergoing metallurgical transformations during induction hardening heat treatment ».
In Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013)
pp. 774-783.
Warrendale, PA, USA : Association for Iron and Steel Technology.
Lê, Van Ngan et Champliaud, Henri.
2013.
« Safety factor of beam-column structures based on finite element linear buckling analysis ».
In Congrès français de mécanique 2013 : du 26 au 30 août 2013 Bordeaux (Bordeaux, France, Aug. 26-30, 2013)
Association Française de Mécanique.
Mojarad Farimani, S., Champliaud, Henri, Gholipour, J., Savoie, J. et Wanjara, P..
2013.
« Numerical and experimental study of tube hydroforming for aerospace applications ».
In The Current State-of-the-Art on Material Forming: Numerical and Experimental Approaches at Different Length-Scales (Aveiro, Portugal, Apr. 22-24, 2013)
Coll. « Key Engineering Materials », vol. 554-557.
pp. 1779-1786.
Zurich-Durnten, Switzerland : Trans Tech Publications Ltd.
Saboori, M., Gholipour, J., Champliaud, Henri, Gakwaya, A., Savoie, J. et Wanjara, P..
2013.
« Development of an inverse method for material characterization ».
In Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013)
pp. 694-701.
Warrendale, PA, USA : Association for Iron and Steel Technology.
Saboori, M., Gholipour, J., Champliaud, Henri, Gakwaya, A., Savoie, J. et Wanjara, P..
2013.
« Effect of material model on finite element modeling of aerospace alloys ».
In The Current State-of-the-Art on Material Forming: Numerical and Experimental Approaches at Different Length-Scales (Aveiro, Portugal, Apr. 22-24, 2013)
Coll. « Key Engineering Materials », vol. 554-557.
pp. 151-156.
Zurich-Durnten, Switzerland : Trans Tech Publications Ltd.
Sarafan, S., Wanjara, P., Champliaud, Henri, Mathieu, L. et Lanteigne, J..
2013.
« Characteristics of electron beam welded CA6NM ».
In Materials Science and Technology Conference and Exhibition 2013, MS and T 2013 (Montreal, QC, Canada, Oct. 27-31, 2013)
pp. 720-732.
Warrendale, PA, USA : Association for Iron and Steel Technology.
Tahvilian, A. M., Champliaud, Henri, Liu, Zhaoheng et Hazel, B..
2013.
« Study of workpiece temperature distribution in the contact zone during robotic grinding process using finite element analysis ».
In 8th CIRP Conference on Intelligent Computation in Manufacturing Engineering, ICME 2012 (Ischia, Italy, July 18-20, 2012)
Coll. « Procedia CIRP », vol. 12.
pp. 205-210.
Elsevier.
Tahvilian, Amir Masoud, Champliaud, Henri, Liu, Zhaoheng et Hazel, Bruce.
2013.
« Influence of grit shape and cutting edge of material removal mechanism of a single abrasive in flexible robotic grinding ».
In ASME 2013 International Mechanical Engineering Congress and Exposition : November 15-21, 2013, San Diego, California, USA (San Diego, CA, USA, Nov. 15-21, 2013 )
New York, NY, USA : ASME.
Tahvilian, Amir Masoud, Liu, Zhaoheng, Champliaud, Henri et Hazel, Bruce.
2013.
« Experimental and finite element analysis of temperature and energy partition to the workpiece while grinding with a flexible robot ».
Journal of Materials Processing Technology, vol. 213, nº 12.
pp. 2292-2303.
Tahvilian, M., Champliaud, Henri, Liu, Zhaoheng et Hazel, B..
2013.
« Chop formation analysis of single grit cutting action in robotic grinding processes ».
In 52nd Annual Conference of Metallurgists (COM 2013) (Montreal, QC, Canada, Oct. 27-31, 2013)
Montreal, QC, Canada : CIM The Candian Institute of Mining.
Thuot, Dominique, Liu, Zhaoheng, Champliaud, Henri, Beaudry, Julien, Richard, Pierre-Luc et Blain, Michel.
2013.
« Remote robotic underwater grinding system and modeling for rectification of hydroelectric structures ».
Robotics and Computer-Integrated Manufacturing, vol. 29, nº 1.
pp. 86-95.
Tran, Quan H., Champliaud, Henri, Feng, Zhengkun, Salem, Jamel et Dao, Thien-My.
2013.
« Heat-assisted roll-bending process dynamic simulation ».
International Journal of Modelling and Simulation, vol. 33, nº 1.
pp. 54-62. 2012
Champliaud, H. et Lê, Van Ngan.
2012.
« Beginning learning principles of finite element method with heat conduction ».
In Proceedings of the 5th World Universities Forum : Reinventing the university in a time of crisis (Rhodes Island, Greece, Jan. 8-10, 2012)
Rhodes Island, Greece : Common Ground Publishing.
Feng, Zhengkun et Champliaud, Henri.
2012.
« Investigation of non-kinematic conical roll bending process with conical rolls ».
Simulation Modelling Practice and Theory, vol. 27.
pp. 65-75.
Feng, Zhengkun et Champliaud, Henri.
2012.
« Modeling and simulation of mecano-welding process for cylinders ».
In Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (Chicago, IL, USA, Aug. 12-15, 2012)
New York, NY, USA : ASME.
Feng, Zhengkun et Champliaud, Henri.
2012.
« Numerical simulation of mecano-welding process for cylinder manufacturing ».
In ASME 2012 Pressure Vessels and Piping Conference, PVP 2012 (Toronto, ON, Canada, July 15-19, 2012)
pp. 1055-1060.
New York, N.Y., USA : American Society of Mechanical Engineers.
Feng, Zhengkun, Champliaud, Henri, Sabourin, Michel et Morin, Sébastien.
2012.
« Modeling and simulation based on inverse finite element method for unfolding large and thick blades of Francis turbines ».
In 24th European Modeling and Simulation Symposium, EMSS 2012 (Vienna, Austria, Sept.19-21, 2012)
pp. 27-31.
Italy : DIPTEM.
Feng, Zhengkun, Champliaud, Henri, Sabourin, Michel et Morin, Sebastien.
2012.
« Simulation of blank design for blades of francis turbines ».
In ASME 2012 International Mechanical Engineering Congress and Exposition, IMECE 2012 (Houston, TX, USA, Nov. 9-15, 2012)
pp. 23-30.
New York, N.Y., USA : American Society of Mechanical Engineers.
Kassab, Rabih Kamal, Champliaud, Henri, Lê, Van Ngan, Lanteigne, Jacques et Thomas, Marc.
2012.
« Experimental and finite element analysis of a t-joint welding ».
Journal of Mechanics Engineering and Automation, vol. 2, nº 7.
pp. 411-421.
Lê, Van Ngan et Champliaud, Henri.
2012.
« A teaching approach for enhancing structural design aspects in basic engineering courses ».
In Proceedings of the 5th World Universities Forum : Reinventing the university in a time of crisis (Rhodes Island, Greece, Jan. 8-10, 2012)
Rhodes Island, Greece : Common Ground Publishing.
Lê, Van Ngan et Champliaud, Henri.
2012.
« Finite element simulations for comparing three manhole designs for horizontal mills ».
In Proceedings of the IASTED International Conference on Modelling and Simulation, MS 2012 (Banff, AB, Canada, July 3-5, 2012 )
pp. 192-197.
Calgary, Canada : Acta Press.
Saboori, M., Champliaud, Henri, Gholipour, J., Gakwaya, A., Savoie, J. et Wanjara, P..
2012.
« Study of true stress-strain curve after necking for application in ductile fracture criteria in tube hydroforming of aerospace material ».
In Material Forming ESAFORM 2012 (Erlangen, Germany, Mar. 14-16, 2012)
Coll. « Key Engineering Materials », vol. 504-506.
pp. 95-100.
Trans Tech Publications Ltd.
Tran, Hoang Quan, Champliaud, Henri, Feng, Zhengkun et Dao, Thien-My.
2012.
« Analytical modeling and Fe simulation for analyzing applied forces during roll bending process ».
In ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (Chicago, IL, USA, Aug. 12-15, 2012)
pp. 207-215.
American Society of Mechanical Engineers.
Tran, Hoang Quan, Champliaud, Henri, Feng, Zhengkun et Dao, Thien-My.
2012.
« Dynamic analysis of a workpiece deformation in the roll bending process by FEM simulation ».
In 24th European Modeling and Simulation Symposium, EMSS 2012 (Vienna, Austria, Sept.19-21, 2012)
pp. 477-482.
Italy : DIPTEM. 2011
Feng, Zhengkun et Champliaud, Henri.
2011.
« Modeling and simulation of asymmetrical three-roll bending process ».
Simulation Modelling Practice and Theory, vol. 19, nº 9.
pp. 1913-1917.
Feng, Zhengkun et Champliaud, Henri.
2011.
« Modeling and simulation of mecano-welding process for tubular sections ».
In ASME International Mechanical Engineering Congress & Exposition (IMECE) (Denver, CO, USA, Nov. 11-17, 2011)
pp. 11-14.
ASME.
Feng, Zhengkun et Champliaud, Henri.
2011.
« Three-stage process for improving roll bending quality ».
Simulation Modelling Practice and Theory, vol. 19, nº 2.
pp. 887-898.
Hulskamp, A. W., Van Wingerden, J. W., Barlas, T., Champliaud, Henri, Van Kuik, G. A. M., Bersee, Harald E. N. et Verhaegen, M..
2011.
« Design of a scaled wind turbine with a smart rotor for dynamic load control experiments ».
Wind Energy, vol. 14, nº 3.
pp. 339-354.
Lajmi, Abdelmajid, Champliaud, Henri et Lê, Van Ngan.
2011.
« Computation of the maximum torque of a cap liner using a power-law friction and finite element analysis ».
Packaging Technology and Science, vol. 24, nº 2.
pp. 103-121.
Lê, Van Ngan et Champliaud, Henri.
2011.
« Finite element analysis of spring back strain energy of metal sheet coils ».
In A world of engineering simulation industrial needs, best practice, visions for the future ; NWC 2011, NAFEMS World Congress, 23-26 May, Boston, USA (Boston, MA, USA, May 23-26, 2011)
Saboori, Mehdi, Gholipour, J., Champliaud, Henri, Gakwaya, A., Savoie, J. et Wanjara, P..
2011.
« Prediction of burst pressure using a decoupled ductile fracture criterion for tube hydroforming of aerospace alloys ».
In 14th International Esaform Conference on Material Forming (Esaform) (Belfast, Ireland, Apr. 27-29, 2011)
Coll. « AIP Conference Proceedings », vol. 1353.
pp. 301-306.
Melville, NY, USA : American Institute of Physics.
Tran, Quan Hoang, Champliaud, Henri, Feng, Zhengkun et Dao, Thien-My.
2011.
« FE simulation of heat assisted roll bending process for manufacturing large and thick high strength steel axisymmetric parts ».
In IASTED International Conference on Modelling, Simulation, and Identification (MSI) (Pittsburgh, PA, USA, Nov. 7-9, 2011)
pp. 322-329.
Calgary, Canada : ACTA Press. 2010
Charrette, O., Thomas, Marc et Champliaud, Henri.
2010.
« Effet des contraintes résiduelles de soudage sur les paramètres modaux de plaques minces ».
In XVII ème Symposium Vibration, Chocs et Bruits (VCB) (Écully, France, 15-17 juin 2010)
Feng, Zhengkun et Champliaud, Henri.
2010.
« Analyses of non-kinematic conical roll bending process with conical rolls ».
In ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC / CIE) (Montréal, Québec, Canada, Aug.15–18, 2010)
Coll. « ASME Conference Proceedings », vol. 44113.
pp. 121-130.
New York, NY, USA : American Society of Mechanical Engineers.
Feng, Zhengkun et Champliaud, Henri.
2010.
« Comparison between numerical simulation and experimentation of roll bending process with three asymmetrical cylindrical rolls ».
In ASME 2010 International Mechanical Engineering Congress and Exposition (IMECE) (Vancouver, Canada, Nov. 12-18, 2010)
Hulskamp, A. W., Champliaud, Henri, Van Wingerden, J. W., Barlas, T., Bersee, Harald E. N., Van Kuik, G. A. M. et Verhaegen, M..
2010.
« Smart dynamic rotor control : part 1, design of a smart rotor ».
In 3rd Conference Torque 2010 : the science of making torque from wind (FORTH, Heraklion, Crete, Greece, June 28-30, 2010)
Kassab, Rabih, Champliaud, Henri, Lanteigne, Jacques, Lê, Van Ngan et Thomas, Marc.
2010.
« Finite element modeling of a welded T-joint ».
In Proceedings of the Canadian Society of Mechanical Engineering Forum (Victoria, B.C, Canada, June 7-9, 2010)
Lajmi, Abdelmajid, Champliaud, Henri et Lê, Van Ngan.
2010.
« Pressure and temperature dependent static friction model for an elastomer cap liner based on experiments ».
In Fifth International Conference on Advances in Mechanical Engineering and Mechanics (Hammamet, Tunisia, Dec. 18-20, 2010)
Lê, Van Ngan et Champliaud, Henri.
2010.
« Finite element simulation of forces in strips tying metal sheet coils ».
In 30th IASTED Conference on Modelling, Identification, and Control (AsiaMIC) (Phuket, Thailand, November 24-26, 2010)
Coll. « Proceedings of the IASTED International Conference on Modelling, Identification and Control »
pp. 74-79.
Calgary, Canada : Acta Press. Lê, Van Ngan, Champliaud, Henri, Marchand, Françoise, Terriault, Patrick et Arteau, Jean. 2010. « Effective learning of buckling of columns in engineering programs ». Communication lors de la conférence : XI International Conference on Engineering and Technology Education (INTERTECH) (Ilheus, Bahia, Brazil, Mar. 7-10, 2010).
Lê, Van Ngan, Champliaud, Henri, Marchand, Françoise, Terriault, Patrick et Arteau, Jean.
2010.
« Effective learning of buckling of columns in engineering programs ».
In Proceedings of international conference on engineering and technology education (Ilheus, Bahia, Brazil, Mar. 7-10, 2010)
pp. 143-147.
Saboori, Mehdi, Champliaud, Henri, Gholipour Baradari, J., Gakwaya, A. et Savoie, J.. 2010. « Analytical evaluation and finite element simulation of material characteristics in tube hydroforming of aerospace alloys ». Communication lors de la conférence : International Conference on Advances in Materials and Processing Technologies (Paris, France, Oct. 24-27, 2010). 2009
Champliaud, Henri, Feng, Zhengkun et Bersee, Harald E. N..
2009.
« Three-point bending testing of sandwich beams and finite element comparison ».
In ASME International Mechanical Engineering Congress and Exposition (IMECE) (Lake Buena Vista, FL, USA, Nov. 13-19, 2009)
Coll. « ASME Conference Proceedings »
pp. 357-363.
New York, NY, USA : American Society of Mechanical Engineers.
Charron, J-F., Teuwen, J., Joncas, Simon, Bersee, Harald E. N. et Champliaud, Henri.
2009.
« Vacuum infused anionic polyamide-6 composites : a comparison study between different mould heating strategies ».
In 24th Annual Technical Conference of the American Society for Composites and 1st Joint Canadian-American Technical Conference on Composites (Newark, DE, USA, Sept. 15-17, 2009)
pp. 931-946.
DEStech Publications, Inc..
Feng, Zhengkun, Champliaud, Henri et Dao, Thien-My.
2009.
« Numerical study of non-kinematical conical bending with cylindrical rolls ».
Simulation Modelling Practice and Theory, vol. 17, nº 10.
pp. 1710-1722.
Feng, Zhengkun, Champliaud, Henri et Dao, Thien-My.
2009.
« Three-dimensional finite element analyses for pyramidal three-roll bending process ».
In ASME International Mechanical Engineering Congress and Exposition (IMECE) (Lake Buena Vista, FL, USA, Nov. 13-19, 2009)
Coll. « ASME Conference Proceedings »
pp. 9-14.
New York, NY, USA : American Society of Mechanical Engineers.
Feng, Zhengkun, Champliaud, Henri, Lê, Van Ngan et Dao, Thien-My.
2009.
« Analysis of roll bending processes based on finite element simulation ».
In Proceedings of the NAFEMS World Congress (Crete, Greece, June 16-19, 2009)
Hulskamp, A. W., Champliaud, Henri et Bersee, Harald E. N..
2009.
« Design and analysis of a scaled smart rotor blade for wind turbine load control ».
In ICCM-17 - 17th International Conference on Composite Materials (Edinburgh, UK, July 27-31, 2009)
Vancouver, Canada : International Committee on Composite Materials.
Lê, Van Ngan, Champliaud, Henri, Martin, F. et Amri, B.
2009.
« Rotating bending stresses in shrink-fit assemblies using FEM ».
In Proceedings of the NAFEMS World Congress (Crete, Greece, June 16-19, 2009)
Rhéaume, François-Étienne, Champliaud, Henri et Liu, Zhaoheng.
2009.
« Understanding and modelling the torsional stiffness of harmonic drives through finite-element method ».
Proceedings of the Institution of Mechanical Engineers, Part C : Journal of Mechanical Engineering Science, vol. 223, nº 2.
pp. 515-524. 2008
Feng, Zhengkun, Champliaud, Henri et Dao, Thien-My.
2008.
« Modeling and simulation of conical bending with cylindrical rolls ».
In ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007)
pp. 545-550.
New York, NY, USA : American Society of Mechanical Engineers.
Feng, Zhengkun, Champliaud, Henri et Dao, Thien-My.
2008.
« Simulation analyses of a non-kinematical conical roll bending process with conical rolls ».
In 20th European Modeling and Simulation Symposium (EMSS) (Amantea, Italy, Sept. 17-19, 2008)
pp. 146-153.
Italy : Diptim-Univ Genoa.
Feng, Zhengkun, Champliaud, Henri et Dao, Thien-My.
2008.
« Simulation of a three-stage process for forming a closed cone from a plate ».
In ASME Pressure Vessels and Piping Conference (PVP) (Chicago, IL, USA, Jul. 27-31, 2008)
pp. 947-953.
New York, NY, USA : American Society of Mechanical Engineers.
Montminy, Steeve, Dupuis, Erick et Champliaud, Henri.
2008.
« Mechanical design of a hopper robot for planetary exploration using SMA as a unique source of power ».
Acta Astronautica, vol. 62, nº 6-7.
pp. 438-452.
Nguyen, H. N., Lê, Van Ngan, Champliaud, Henri et Martin, F..
2008.
« Waving behaviour of fatigue stress fluctuation in shrink-fit assemblies using 3D finite elements ».
In 4th International Conference on High Performance Structures and Materials (HPSM) (Algarve, Portugal, May 13-15, 2008)
pp. 459-469.
Southampton, UK : WITPress.
Zeng, Jun, Liu, Zhaoheng et Champliaud, Henri.
2008.
« FEM dynamic simulation and analysis of the roll-bending process for forming a conical tube ».
Journal of Materials Processing Technology, vol. 198, nº 1-3.
pp. 330-343. 2007
Bellizi, Thibault, Boisvert, Jonathan, Champliaud, Henri et Dao, Thien-My.
2007.
« Estimation of the pressing force in blade forming application ».
In Proceedings of the IASTED International Conference on Modelling and Simulation (Montreal, Canada, May 30-June 1, 2007)
pp. 272-277.
Calgary, Canada : ACTA Press.
Charette, O, Champliaud, Henri et Thomas, Marc.
2007.
« FEM calculation of frequencies variation caused by residual stress distribution in welded structures ».
In Proceedings of the IASTED International Conference on Modelling and Simulation (Montreal, Canada, May 30-June 1, 2007)
pp. 446-451.
Calgary, Canada : ACTA Press.
Duchaine, F., Bersee, H.E.N. et Champliaud, Henri.
2007.
« The influence of the thickness on 3D elastic material properties of unidirectional e-glass/epoxy laminated composites ».
In 6th Canadian International Conference on Composites (CANCOM) (Winnipeg, MB, Canada, Aug. 14-17, 2007)
Duchaine, François et Champliaud, Henri.
2007.
« Structured mesh generation by kriging with local refinement with a new elliptic scheme ».
Engineering with Computers, vol. 23, nº 1.
pp. 61-69.
Feng, Zhengkun, Champliaud, Henri et Dao, Thien-My.
2007.
« Modelling and simulation of conical bending process with sliding rolls ».
In IFAC Workshop on Manufacturing Modelling, Management and Control (Budapest, Hungary, Nov. 14-16, 2007)
Feng, Zhengkun, Champliaud, Henri, Zeng, J. et Dao, Thien-My.
2007.
« Investigation of influence of sliding of rolls over plate on continuous bending with noncompatible conical rolls ».
In Proceedings of the IASTED International Conference on Modelling and Simulation (Montréal, Canada, May 30-June 1, 2007)
pp. 527-531.
Calgary, Canada : ACTA Press.
Lê, Van Ngan, Champliaud, Henri et Amri, Brahim.
2007.
« A hysteresis approach of thermal expansion effect on residual stresses due to welding ».
In Proceedings of the IASTED International Conference on Modelling and Simulation (Montreal, Canada, May 30-June 1, 2007)
pp. 521-526.
Calgary, Canada : ACTA Press.
Martin, Francis, Lê, Van Ngan, Champliaud, Henri et Nguyen, Hoa Ngan.
2007.
« Stress concentration of shrink fit assembly using finite element method ».
In Proceedings of the IASTED Asian Conference on Modelling and Simulation (Beijing, China, Oct. 8-10, 2007)
pp. 67-70.
Calgary, Canada : ACTA Press.
Nasri, Hassan, Lanteigne, Jacques et Champliaud, Henri.
2007.
« Usage of the contour method in measuring residual stress in welding and peen-welding applications ».
In Proceedings of the IASTED Asian Conference on Modelling and Simulation (Beijing, China, Oct. 8-10, 2007)
pp. 89-95.
Calgary, Canada : ACTA Press.
Nguyen, H.N., Lê, Van Ngan, Champliaud, Henri et Martin, Francis.
2007.
« Stress concentration factor in shrink-fit shaft based on 3-D finite elements ».
In Proceedings of the 8th National Conference on Mechanics (Hanoi, Viêt Nam, Dec. 6-9, 2007)
Zhao, Jian Hua, Champliaud, Henri et Dao, Thien-My.
2007.
« Simulation of shear spinning process using finite element method ».
In Proceedings of the IASTED International Conference on Modelling and Simulation (Montreal, Canada, May 30-June 1, 2007)
pp. 239-245.
Calgary, Canada : ACTA Press.
Zhao, Jian-Hua, Champliaud, Henri et Dao, Thien-My.
2007.
« Simulation of shear spinning process for pressure vessel components ».
In ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007)
pp. 569-576.
New York, NY, USA : American Society of Mechanical Engineers. 2006
Boisvert, Jonathan, Bellizzi, Thibaut, Champliaud, Henri et Seers, Patrice.
2006.
« Print depth prediction in hot forming process with a reconfigurable die ».
In ANSYS Conference and Exhibition (Pittsburgh, PA, USA, May 2-4, 2006)
Boisvert, Jonathan, Champliaud, Henri, Bellizzi, Thibaut et Seers, Patrice.
2006.
« Simulation and optimisation of a reconfigurable discrete die for the hot forming of thick steel plates in hydro power industry ».
In ANSYS Conference and Exhibition (Pittsburgh, PA, USA, May 2-4, 2006)
Duchaine, François, Baten, E.M., Champliaud, Henri et Bersee, H.E.N..
2006.
« Comparison of beam theories with finite elemente analysis in three-point bending of thick composites ».
In 8th International Conference on Computational Structures Technology (Las Palmas de Gran Canaria, Spain, Sept.12-15, 2006)
Stirlingshire, UK : Civil-Comp Press.
Montminy, Steeve, Dupuis, Erick et Champliaud, Henri.
2006.
« Mechanical design of a hopper robot for planetary exploration using SMA as a unique source of power ».
In AIAA 57th International Astronautical Congress (IAC) (Valencia, Spain, Oct. 2-6, 2006)
pp. 5288-5297.
Reston, VA, USA : American Institute of Aeronautics and Astronautics Inc..
Rhéaume, F.-É, Champliaud, Henri et Liu, Zhaoheng.
2006.
« Simulating strain wave gearing torsional stiffness using the finite element method ».
In ANSYS Conference and Exhibition (Pittsburgh, PA, USA, May 2-4, 2006)
2005
Champliaud, Henri et Bouzid, Abdel-Hakim.
2005.
« Computation of unloading stiffness of nonlinear gaskets using dual kriging interpolation ».
In Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, Canada, Aug. 1-4, 2005)
pp. 127-138.
Montréal, Qué., Canada : École de technologie supérieure.
Champliaud, Henri, Lajmi, Abdelmajid et Lê, Ngan Van.
2005.
« Finite element analysis of a three-point belt tension tester ».
In Non-Conference Specific Technical Papers (Troy, MI, USA, Sept. 1, 2005)
Coll. « SAE Technical Papers », vol. 2005-01-3137.
SAE.
Potvin, Marie-Josée, Sylvestre, Bruno et Champliaud, Henri.
2005.
« Development of a small deployable membrane antenna ».
In Canadian Aeronautics and Space Institute Conference (Toronto, ON, Canada, Apr. 26-27, 2005)
Terrier, P., Seers, P. et Champliaud, H..
2005.
« Comparison of emissions and fuel consumption between gasoline and E85 in a simulated hybrid electric vehicle ».
In Powertrain & Fluid Systems Conference and Exhibition (San Antonio, TX, USA, Oct. 24-27, 2005)
Coll. « SAE Technical Papers », vol. 2005-01-3829.
SAE International.
Thomas, Marc et Champliaud, Henri.
2005.
« Effect of residual stresses on modal parameters of welded structures ».
In 23rd Seminar on Machinery Vibration (Edmonton, AB, Canada, Oct. 26-28, 2005)
Calgary, Canada : CMVA. 2004
Bouzid, Abdel-Hakim et Champliaud, Henri.
2004.
« Contact stress evaluation of nonlinear gaskets using dual kriging interpolation ».
Journal of Pressure Vessel Technology, vol. 126, nº 4.
pp. 445-450.
Lê, Van Ngan, Ngô, Anh Dung, Marchand, Françoise, Champliaud, Henri et Packwood, F..
2004.
« Calculating tension force in belts retaining steel rolls by finite elements ».
In 7th National Conference on Mechanics of Deformable Bodies (Do-Son, Vietnam, Aug. 27-28, 2004)
2003
Bouzid, Hakim A. et Champliaud, Henri.
2003.
« On the use of dual kriging interpolation for the evaluation of the gasket stress distribution in bolted joints ».
In Pressure Vessels and Piping Conference (PVP) (Cleveland, OH, USA, Jul. 20-24, 2003)
pp. 77-83.
USA : American Society of Mechanical Engineers.
Champliaud, Henri, Duchaine, François et Lê, Van Ngan.
2003.
« Controlling normal direction and thickness of interpolated surfaces of complex thin parts ».
In 4th International Conference on Industrial Automation (Montreal, QC, Canada, June 9-11, 2003)
Champliaud, Henri, Lajmi, Abdelmajid et Lê, Van Ngan.
2003.
« Numerical approach of twist-off torque prediction for cap bottle closure ».
In 4th International Conference on Industrial Automation (Montreal, QC, Canada, June 9-11, 2003)
Champliaud, Henri et Le, N. V..
2003.
« Prediction of the leakage pressure of a cap and bottle assembly using the finite element method ».
Glass Technology, vol. 44, nº 6.
pp. 225-230. Duchaine, F., Champliaud, Henri, Morin, O. et Lê, Van Ngan. 2003. « Maillage par krigeage de volume par reconnaissance des contours des sections dans un environnement CAD ». Communication lors de la conférence : 71e Congrès de l'ACFAS (Rimouski, QC, Canada, 19-23 mai 2003). Lajmi, A., Champliaud, Henri et Lê, Van Ngan. 2003. « Effet du fluage sur le comportement du joint d'étanchéité dans les fermetures filetées ». Communication lors de la conférence : 71e Congrès de l'ACFAS (Rimouski, QC, Canada, 19-23 mai 2003). Morin, O., Champliaud, Henri, Duchaine, F. et Bouzid, Hakim. 2003. « Krigeage du comportement des joints d'étanchéité au chargement et au déchargement ». Communication lors de la conférence : 71e Congrès de l'ACFAS (Rimouski, QC, Canada, 19-23 mai 2003). 2000Champliaud, Henri. 2000. « Analyse par éléments finis du sertissage de capsules d'étanchéité ». Thèse de doctorat. Montréal, École de technologie supérieure, 261 p.
Champliaud, Henri et Lê, Van Ngan.
2000.
« Finite element analysis of crowning sealing caps ».
In 2000 ANSYS conference proceedings (Pittsburgh, PA, USA, Aug. 28-30, 2000)
|
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau