| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Liste des publications de "Gharbi, Ali"Nombre de documents archivés : 217. 2024
Ait El Cadi, Abdessamad, Gharbi, Ali, Dhouib, Karem et Artiba, Abdelhakim.
2024.
« Joint production, maintenance, and quality control in manufacturing systems with imperfect inspection ».
Journal of Manufacturing Systems, vol. 77.
pp. 848-858.
BouAbid, H., Dhouib, K. et Gharbi, A..
2024.
« Production/preventive maintenance comprehensive approach for manufacturing systems susceptible to quality degradation ».
Arabian Journal for Science and Engineering.
Furlan De Assis, Rodrigo, Ferreira, William de Paula, Frias Faria, Alexandre, Antonio Santa-Eulalia, Luis, Ouhimmou, Mustapha et Gharbi, Ali.
2024.
« Optimising warehouse order picking: Real case application in the shoe manufacturing industry ».
IEEE Access, vol. 12.
pp. 170868-170888.
Gharbi, Ali, Kenné, Jean-Pierre, Takengny, Armel Leonel Kuegoua et Assid, Morad.
2024.
« Joint emission-dependent optimal production and preventive maintenance policies of a deteriorating manufacturing system ».
Sustainability, vol. 16, nº 14.
Hajji, Amel, Bouabid, Hanen, Dhouib, Karem et Gharbi, Ali.
2024.
« Throughput assessment of manufacturing cells subject to random disturbances ».
In Advances in Mechanical Engineering and Mechanics III : Selected Papers from the 6th Tunisian Congress on Mechanics, CoTuMe 2023 (Monastir, Tunisia, Mar. 17-19, 2023)
Coll. « Lecture notes in mechanical engineering »
pp. 440-447.
Springer.
Kenné, Jean-Pierre, Gharbi, Ali, Takengny, Armel Leonel Kuegoua et Assid, Morad.
2024.
« Optimal control policy of unreliable production systems generating greenhouse gas emission ».
Sustainability, vol. 16, nº 13.
Polotski, Vladimir, Kenné, Jean-Pierre et Gharbi, Ali.
2024.
« Estimation-based production control of manufacturing–remanufacturing systems with uncertain seasonal return and imprecise demand and inventory ».
International Journal of Production Research, vol. 62, nº 13.
pp. 4595-4622. 2023
Assid, M., Gharbi, A. et Hajji, A..
2023.
« Integrated control policies of production, returns’ replenishment and inspection for unreliable hybrid manufacturing-remanufacturing systems with a quality constraint ».
Computers and Industrial Engineering, vol. 176.
Assid, Morad, Gharbi, Ali et Hajji, Adnène.
2023.
« Control policies of changeable manufacturing-remanufacturing systems using two failure-prone production facilities ».
International Journal of Advanced Manufacturing Technology, vol. 125, nº 1-2.
pp. 279-297. 2022
Dhahri, Akrem, Gharbi, Ali et Ouhimmou, Mustapha.
2022.
« Integrated production-delivery control policy for an unreliable manufacturing system and multiple retailers ».
International Journal of Production Economics, vol. 245.
Dhahri, Akrem, Gharbi, Ali et Ouhimmou, Mustapha.
2022.
« Integrated production-transshipment control policy for a two-location unreliable manufacturing system ».
International Journal of Production Economics, vol. 247.
Gharbi, A., Kenné, J. P. et Kaddachi, R..
2022.
« Dynamic optimal control and simulation for unreliable manufacturing systems under perishable product and shelf life variability ».
International Journal of Production Economics, vol. 247.
Kaddachi, Rawia, Gharbi, Ali et Kenné, Jean-Pierre.
2022.
« Integrated production and maintenance control policies for failure-prone manufacturing systems producing perishable products ».
International Journal of Advanced Manufacturing Technology, vol. 119, nº 7-8.
pp. 4635-4657.
Polotski, V., Gharbi, A. et Kenne, J. P..
2022.
« Production control in manufacturing systems with perishable products under periodic demand ».
Journal of Manufacturing Systems, vol. 63.
pp. 288-303. 2021
Ait El Cadi, Abdessamad, Gharbi, Ali, Dhouib, Karem et Artiba, Abdelhakim.
2021.
« Joint production and preventive maintenance controls for unreliable and imperfect manufacturing systems ».
Journal of Manufacturing Systems, vol. 58.
pp. 263-279.
Ait-El-Cadi, Abdessamad, Gharbi, Ali, Dhouib, Karem et Artiba, Abdelhakim.
2021.
« Integrated production, maintenance and quality control policy for unreliable manufacturing systems under dynamic inspection ».
International Journal of Production Economics, vol. 236.
Assid, M., Gharbi, A. et Hajji, A..
2021.
« Production planning and control of unreliable hybrid manufacturing-remanufacturing systems with quality-based categorization of returns ».
Journal of Cleaner Production, vol. 312.
Entezaminia, Arezou, Gharbi, Ali et Ouhimmou, Mustapha.
2021.
« A joint production and carbon trading policy for unreliable manufacturing systems under cap-and-trade regulation ».
Journal of Cleaner Production, vol. 293.
Hajej, Zied, Rezg, Nidhal et Gharbi, Ali.
2021.
« Joint production preventive maintenance and dynamic inspection for a degrading manufacturing system ».
International Journal of Advanced Manufacturing Technology, vol. 112, nº 1-2.
pp. 221-239.
Jaoua, Amel, Obba, Ons et Gharbi, Ali.
2021.
« Production and quality control of hybrid manufacturing remanufacturing system with stochastic return ».
In International Conference on Decision Aid Sciences and Application (DASA) (Sakheer, Bahrain, Dec. 07-08, 2021)
pp. 695-701.
Institute of Electrical and Electronics Engineers Inc..
Montecinos, Julio, Ouhimmou, Mustapha, Chauhan, Satyaveer, Paquet, Marc et Gharbi, Ali.
2021.
« Transport carriers' cooperation on the last-mile delivery in urban areas ».
Transportation, vol. 48, nº 5.
pp. 2401-2431.
Polotski, Vladmir, Gharbi, Ali et Kenne, Jean-Pierre.
2021.
« Production control of unreliable manufacturing systems with perishable inventory ».
International Journal of Advanced Manufacturing Technology, vol. 116, nº 7-8.
pp. 2473-2496.
Rivera-Gómez, Héctor, Gharbi, Ali, Kenné, Jean-Pierre, Ortiz-Zarco, Ruth et Corona-Armenta, José Ramón.
2021.
« Joint production, inspection and maintenance control policies for deteriorating system under quality constraint ».
Journal of Manufacturing Systems, vol. 60.
pp. 585-607. 2020
Assid, M., Gharbi, A. et Hajji, A..
2020.
« Production and subcontracting control for an unreliable manufacturing system with setups ».
International Journal of Production Research, vol. 58, nº 12.
pp. 3570-3588.
Assid, M., Gharbi, A. et Hajji, A..
2020.
« Production control of failure-prone manufacturing-remanufacturing systems using mixed dedicated and shared facilities ».
International Journal of Production Economics, vol. 224.
Entezaminia, Arezou, Gharbi, Ali et Ouhimmou, Mustapha.
2020.
« Environmental hedging point policies for collaborative unreliable manufacturing systems with variant emitting level technologies ».
Journal of Cleaner Production, vol. 250.
Hajej, Zied, Rezg, Nidhal et Gharbi, Ali.
2020.
« Maintenance on leasing sales strategies for manufacturing/remanufacturing system with increasing failure rate and carbon emission ».
International Journal of Production Research, vol. 58, nº 21.
pp. 6616-6637.
Polotski, V., Kenne, J. P. et Gharbi, A..
2020.
« Kalman filter based production control of a failure-prone single-machine single-product manufacturing system with imprecise demand and inventory information ».
Journal of Manufacturing Systems, vol. 56.
pp. 558-572.
Rivera-Gómez, Héctor, Gharbi, Ali, Kenné, Jean-Pierre, Montaño-Arango, Oscar et Corona-Armenta, Jose Ramón.
2020.
« Joint optimization of production and maintenance strategies considering a dynamic sampling strategy for a deteriorating system ».
Computers and Industrial Engineering, vol. 140.
2019
Assid, M., Gharbi, A. et Hajji, A..
2019.
« Production and setup control policy for unreliable hybrid manufacturing-remanufacturing systems ».
Journal of Manufacturing Systems, vol. 50.
pp. 103-118.
Assid, M., Gharbi, A. et Hajji, A..
2019.
« Production planning of an unreliable hybrid manufacturing-remanufacturing system under uncertainties and supply constraints ».
Computers and Industrial Engineering, vol. 136.
pp. 31-45.
Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali.
2019.
« Production and replacement planning of a deteriorating remanufacturing system in a closed-loop configuration ».
Journal of Manufacturing Systems, vol. 53.
pp. 234-248.
Polotski, V., Kenne, J. P. et Gharbi, A..
2019.
« Joint production and maintenance optimization in flexible hybrid manufacturing-remanufacturing systems under age-dependent deterioration ».
International Journal of Production Economics, vol. 216.
pp. 239-254.
Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali.
2019.
« Optimal production and corrective maintenance in a failure-prone manufacturing system under variable demand ».
Flexible Services and Manufacturing Journal, vol. 31, nº 4.
pp. 894-925.
Polotski, Vladmir, Kenné, Jean-Pierre et Gharbi, Ali.
2019.
« Production control of hybrid manufacturing-remanufacturing systems under demand and return variations ».
International Journal of Production Research, vol. 57, nº 1.
pp. 100-123. 2018
Assid, Morad, Gharbi, Ali et Hajji, Adnène.
2018.
« Planification simultanée de la production, de la remise à neuf et du setup pour un système hybride non fiable ».
In 12e Conférence Internationale de Modélisation, Optimisation et SIMulation- MOSIM’18 : L’essor des systèmes connectés dans l’industrie et les services (Toulouse, France, 27-29 juin 2018)
Bouslah, Bassem, Gharbi, Ali et Pellerin, Robert.
2018.
« Joint production, quality and maintenance control of a two-machine line subject to operation-dependent and quality-dependent failures ».
International Journal of Production Economics, vol. 195.
pp. 210-226.
Hajej, Zied, Rezg, Nidhal et Gharbi, Ali.
2018.
« Quality issue in forecasting problem of production and maintenance policy for production unit ».
International Journal of Production Research, vol. 56, nº 18.
pp. 6147-6163.
Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali.
2018.
« Joint production and replacement planning for an unreliable manufacturing system subject to random demand and quality ».
[Article de conférence]. IFAC-PapersOnLine, vol. 51, nº 11.
pp. 951-956.
Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali.
2018.
« Production and replacement policies for a deteriorating manufacturing system under random demand and quality ».
European Journal of Operational Research, vol. 264, nº 2.
pp. 623-636.
Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali.
2018.
« Stochastic optimal control of random quality deteriorating hybrid manufacturing/remanufacturing systems ».
Journal of Manufacturing Systems, vol. 49.
pp. 172-185.
Rivera-Gómez, Héctor, Gharbi, Ali, Kenné, Jean-Pierre, Montaño-Arango, Oscar et Hernández-Gress, Eva Selene.
2018.
« Subcontracting strategies with production and maintenance policies for a manufacturing system subject to progressive deterioration ».
International Journal of Production Economics, vol. 200.
pp. 103-118. 2017
Ait El Cadi, Abdessamad, Gharbi, Ali, Bouslah, Bassem et Artiba, Abdelhakim.
2017.
« Optimal joint production, maintenance and quality control for a single machine with random failures using Matlab/Simulink optimization-simulation ».
In 7th International Conference on Industrial Engineering and Systems Management (IESM) (Saarbrücken, Germany, Oct. 11-13, 2017)
Assid, Morad, Gharbi, Ali et Hajji, Adnène.
2017.
« Planification simultanée de la production et de la sous-traitance de différents types de produits ».
In CIGI 2017 : 12ème édition du Congrès International de Génie Industriel (Compiègne, France, 3-5 mai 2017)
Hajej, Zied, Rezg, Nidhal et Gharbi, Ali.
2017.
« Ecological optimization for forecasting production and maintenance problem based on carbon tax ».
International Journal of Advanced Manufacturing Technology, vol. 88, nº 5-8.
pp. 1595-1606.
Hajej, Zied, Rezg, Nidhal et Gharbi, Ali.
2017.
« Improved preventive maintenance in the framework of forecasting problem under subcontractor constraint ».
International Journal of Production Research, vol. 55, nº 16.
pp. 4557-4600.
Hajej, Zied, Rezg, Nidhal et Gharbi, Ali.
2017.
« Joint optimization of production and maintenance planning with an environmental impact study ».
International Journal of Advanced Manufacturing Technology, vol. 93, nº 1-4.
pp. 1269-1282.
Hlioui, Rached, Gharbi, Ali et Hajji, Adnene.
2017.
« Joint supplier selection, production and replenishment of an unreliable manufacturing-oriented supply chain ».
International Journal of Production Economics, vol. 187.
pp. 53-67.
Ouaret, Samir, Kenné, Jean-Pierre, Gharbi, Ali et Polotski, Vladimir.
2017.
« Age-dependent production and replacement strategies in failure-prone manufacturing systems ».
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 231, nº 3.
pp. 540-554.
Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali.
2017.
« Production and setup policy optimization for hybrid manufacturing–remanufacturing systems ».
International Journal of Production Economics, vol. 183, Part B.
pp. 322-333.
Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali.
2017.
« Set-up and production planning in hybrid manufacturing-remanufacturing systems with large returns ».
International Journal of Production Research, vol. 55, nº 13.
pp. 3766-3787. 2016
Ait El Cadi, Abdessamad, Gharbi, Ali et Artiba, Abdelhakim.
2016.
« MATLAB/SIMULINK -VS- ARENA/OPTQUEST: Optimal production control of unreliable manufacturing systems ».
In 11ème Conférence Francophone de Modélisation, Optimisation et Simulation (MOSIM) (Montréal, QC, Canada, Aug. 21-24, 2016)
MOSIM.
Assid, Morad, Gharbi, Ali et Hajji, Adnène.
2016.
« Planification de la production de la maintenance préventive opportuniste pour un système manufacturier non fiable produisant deux types de produits ».
In 11ème Conférence Francophone de Modélisation, Optimisation et Simulation (MOSIM) (Montréal, QC, Canada, Aug. 21-24, 2016)
MOSIM.
Ben-Salem, A., Gharbi, A. et Hajji, A..
2016.
« Production and uncertain green subcontracting control for an unreliable manufacturing system facing emissions ».
International Journal of Advanced Manufacturing Technology, vol. 83, nº 9-12.
pp. 1787-1799.
Bouslah, B., Gharbi, A. et Pellerin, R..
2016.
« Integrated production, sampling quality control and maintenance of deteriorating production systems with AOQL constraint ».
Omega, vol. 61.
pp. 110-126.
Bouslah, B., Gharbi, A. et Pellerin, R..
2016.
« Joint economic design of production, continuous sampling inspection and preventive maintenance of a deteriorating production system ».
International Journal of Production Economics, vol. 173.
pp. 184-198.
Hajej, Zied, Rezg, Nidhal et Gharbi, Ali.
2016.
« An optimal production/maintenance strategy under lease contract with warranty periods ».
Journal of Quality in Maintenance Engineering, vol. 22, nº 1.
pp. 35-50.
Hajji, Adnène, Pellerin, Robert, Gharbi, Ali, Léger, Pierre Majorique et Babin, Gilbert.
2016.
« Toward valuable prediction of ERP diffusion in North American automotive industry: A simulation based approach ».
International Journal of Production Economics, vol. 175.
pp. 61-70.
Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali.
2016.
« Joint optimal production and replacement policy for a deteriorated closed-loop manufacturing system ».
In 11ème Conférence Francophone de Modélisation, Optimisation et Simulation (MOSIM) (Montréal, QC, Canada, Aug. 21-24, 2016)
MOSIM.
Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali.
2016.
« Adaptive control of hybrid failure-prone manufacturing systems under demand variation and uncertainty ».
In 11th International Conference on Modeling, Optimization and SIMulation - MOSIM'16 (Montreal, QC, Canada, Aug. 22-24, 2016)
MOSIM.
Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali.
2016.
« Production policy optimization in flexible manufacturing-remanufacturing systems ».
[Article de conférence]. IFAC - Papers Online, vol. 49, nº 12.
pp. 295-300.
Rivera-Gomez, Hector, Gharbi, Ali, Kenné, Jean-Pierre, Montano-Arango, Oscar et Hernandez-Gress, Eva Selene.
2016.
« Production control problem integrating overhaul and subcontracting strategies for a quality deteriorating manufacturing system ».
International Journal of Production Economics, vol. 171.
pp. 134-150. 2015
Assid, M., Gharbi, A. et Dhouib, K..
2015.
« Joint production and subcontracting planning of unreliable multi-facility multi-product production systems ».
Omega, vol. 50.
pp. 54-69.
Assid, M., Gharbi, A. et Hajji, A..
2015.
« Production planning and opportunistic preventive maintenance for unreliable one-machine two-products manufacturing systems ».
[Article de conférence]. IFAC-PapersOnLine, vol. 48, nº 3.
pp. 478-483.
Assid, M., Gharbi, Ali et Hajji, A..
2015.
« Joint production, setup and preventive maintenance policies of unreliable two-product manufacturing systems ».
International Journal of Production Research, vol. 53, nº 15.
pp. 4668-4683.
Assid, Morad, Gharbi, Ali et Hajji, Adnène.
2015.
« Étude de comparaison de politiques de commande pour un système manufacturier non fiable avec setup ».
In CIGI 2015 : 11e Congrès international de Génie industriel (Québec, QC, Canada, 26-28 oct. 2015)
Assid, Morad, Gharbi, Ali et Hajji, Adnène. 2015. « Étude de comparaison de politiques de commande pour un système manufacturier non fiable avec setup ». Communication lors de la conférence : CIGI 2015 : 11e Congrès international de Génie industriel (Québec, QC, Canada, 26-28 oct. 2015).
Ben-Salem, A., Gharbi, Ali et Hajji, A..
2015.
« An Environmental Hedging Point Policy to control production rate and emissions in unreliable manufacturing systems ».
International Journal of Production Research, vol. 53, nº 2.
pp. 435-450.
Ben-Salem, Ali, Gharbi, Ali et Hajji, Adnène.
2015.
« Environmental issue in an alternative production-maintenance control for unreliable manufacturing system subject to degradation ».
International Journal of Advanced Manufacturing Technology, vol. 77, nº 1-4.
pp. 383-398.
Hajej, Zied, Rezg, Nidhal et Gharbi, Ali.
2015.
« A decision optimization model for leased manufacturing equipment with warranty under forecasting production/maintenance problem ».
Mathematical Problems in Engineering, vol. 2015.
Hlioui, Rached, Gharbi, Ali et Hajji, Adnène.
2015.
« Integrated quality strategy in production and raw material replenishment in a manufacturing-oriented supply chain ».
International Journal of Advanced Manufacturing Technology, vol. 81, nº 1-4.
pp. 335-348.
Hlioui, Rached, Gharbi, Ali et Hajji, Adnène.
2015.
« Intégration des décisions de production, d’approvisionnement et de contrôle de qualité pour une chaîne d’approvisionnement à trois échelons ».
In CIGI 2015 : 11e Congrès international de Génie industriel (Québec, QC, Canada, 26-28 oct. 2015)
Hlioui, Rached, Gharbi, Ali et Hajji, Adnène. 2015. « Intégration des décisions de production, d’approvisionnement et de contrôle de qualité pour une chaîne d’approvisionnement à trois échelons ». Communication lors de la conférence : CIGI 2015 : 11e Congrès international de Génie industriel (Québec, QC, Canada, 26-28 oct. 2015).
Hlioui, Rached, Gharbi, Ali et Hajji, Adnène.
2015.
« Replenishment, production and quality control strategies in three-stage supply chain ».
International Journal of Production Economics, vol. 166.
pp. 90-102.
Ouaret, Samir, Kenné, Jean-Pierre, Gharbi, Ali et Polotski, Vladimir.
2015.
« Joint production and replacement strategy for a quality deteriorating failure-prone manufacturing system ».
[Article de conférence]. IFAC-PapersOnLine, vol. 48, nº 3.
pp. 1198-1203.
Polotski, Vladimir, Kenné, Jean-Pierre et Gharbi, Ali.
2015.
« Failure-prone manufacturing systems with setups: feasibility and optimality under various hypotheses about perturbations and setup interplay ».
International Journal of Mathematics in Operational Research, vol. 7, nº 6.
pp. 681-705.
Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali.
2015.
« Optimal production scheduling for hybrid manufacturing-remanufacturing systems with setups ».
Journal of Manufacturing Systems, vol. 37.
pp. 703-714.
Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali.
2015.
« Production and setup policy optimization for hybrid manufacturing-remanufacturing systems ».
[Article de conférence]. IFAC-PapersOnLine, vol. 48, nº 3.
pp. 2021-2026. 2014
Assid, M., Gharbi, Ali et Hajji, A..
2014.
« Joint production and setup control policies: an extensive study addressing implementation issues via quantitative and qualitative criteria ».
International Journal of Advanced Manufacturing Technology, vol. 72, nº 5-8.
pp. 809-826.
Bouslah, Bassem, Gharbi, Ali et Pellerin, Robert.
2014.
« Joint production and quality control of unreliable batch manufacturing systems with rectifying inspection ».
International Journal of Production Research, vol. 52, nº 14.
pp. 4103-4117.
Hajej, Zied, Rezg, Nidhal et Gharbi, Ali.
2014.
« Forecasting and maintenance problem under subcontracting constraint with transportation delay ».
International Journal of Production Research, vol. 52, nº 22.
pp. 6695-6716.
Kenné, Jean-Pierre, Polotski, Vladimir et Gharbi, Ali.
2014.
« Feasibility and optimality conditions for setup schedule in uncertain manufacturing systems depend on the interplay between setup logistics and perturbation flow ».
In 20th Conference of the International Federation of Operational Research Societies. 13-18 July 2014. Barcelona, Spain (Barcelona, Spain, July 13-18, 2014)
2013
Bouslah, B., Gharbi, Ali, Pellerin, R. et Hajji, Adnéne.
2013.
« Optimal production control policy in unreliable batch processing manufacturing systems with transportation delay ».
International Journal of Production Research, vol. 51, nº 1.
pp. 264-280.
Bouslah, Bassem, Gharbi, Ali et Pellerin, Robert.
2013.
« Joint optimal lot sizing and production control policy in an unreliable and imperfect manufacturing system ».
International Journal of Production Economics, vol. 144, nº 1.
pp. 143-156.
Mhada, Fatima, Malhame, Roland, Pellerin, Robert, Sadr, Javad et Gharbi, Ali.
2013.
« (Q, s) models for inventory policy with random component procurement lead times ».
In Proceedings of the 2013 International Conference on Industrial Engineering and Systems Management (IESM) (Rabat, Morocco, Oct. 28-30, 2013)
Piscataway, N. J., USA : IEEE.
Ouaret, Samir, Polotski, Vladimir, Kenné, Jean-Pierre et Gharbi, Ali.
2013.
« Manufacturing-remanufacturing failure-prone systems under random demands ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 46, nº 9.
pp. 1620-1625.
Rivera-Gomez, Hector, Gharbi, Ali et Kenné, Jean Pierre.
2013.
« Joint control of production, overhaul, and preventive maintenance for a production system subject to quality and reliability deteriorations ».
International Journal of Advanced Manufacturing Technology, vol. 69, nº 9-12.
pp. 2111-2130.
Rivera-Gomez, Hector, Gharbi, Ali et Kenné, Jean-Pierre.
2013.
« Joint production and major maintenance planning policy of a manufacturing system with deteriorating quality ».
International Journal of Production Economics, vol. 146, nº 2.
pp. 575-587.
Rivera-Gomez, Hector, Gharbi, Ali et Kenné, Jean-Pierre.
2013.
« Production and quality control policies for deteriorating manufacturing system ».
International Journal of Production Research, vol. 51, nº 11.
pp. 3443-3462.
Samir, Ouaret, Vladimir, Polotski, Jean-Pierre, Kenné et Ali, Gharbi.
2013.
« Optimal Production Control of Hybrid Manufacturing/Remanufacturing Failure-Prone Systems under Diffusion-Type Demand ».
Applied Mathematics, vol. 4, nº 3.
pp. 550-559. 2012
Bouabid, H., Dhouib, K. et Gharbi, Ali.
2012.
« Zero inventory/production control policy for manufacturing systems subject to quality deterioration ».
In Proceedings of the 3rd 2012 International Conference on Industrial Engineering and Operations Management (Istanbul, Turkey, July 3-6, 2012)
pp. 1840-1847.
Istanbul, Turkey : IEOM Forum.
Bouslah, B., Pellerin, R. et Gharbi, A..
2012.
« A simulation-based optimization approach for an integrated production and quality control model ».
In Proceedings of the 4th International Conference on Information Systems, Logistics and Supply Chain : Creative Logistics for an Uncertain World - ILS 2012 (Québec, QC, Canada, Aug. 26-29, 2012)
Dhouib, K., Gharbi, A. et Ben Aziza, M. N..
2012.
« Joint optimal production control/preventive maintenance policy for imperfect process manufacturing cell ».
International Journal of Production Economics, vol. 137, nº 1.
pp. 126-136.
Dhouib, K., Gharbi, Ali et Abdelwahed, H..
2012.
« Performance Assessment of Transfer Lines with Unreliable Transfer Mechanism and Non-Negligible Transfer Times ».
In Proceedings of the 3rd 2012 International Conference on Industrial Engineering and Operations Management (Istanbul, Turkey, July 3-6, 2012)
pp. 1856-1865.
Istanbul, Turkey : IEOM Forum.
Hajji, Adnene, Gharbi, Ali et Dellagi, Sofiene.
2012.
« Quality and production control in multiple-product unreliable manufacturing system ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 45, nº 6.
pp. 981-986.
Hajji, Adnéne, Gharbi, Ali et Pellerin, Robert.
2012.
« Joint production control and product quality decision making in a failure prone multiple-product manufacturing system ».
International Journal of Production Research, vol. 50, nº 13.
pp. 3661-3672.
Hajji, Adnéne, Pellerin, Robert, Léger, Pierre-Majorique, Gharbi, Ali et Babin, Gilbert.
2012.
« Dynamic pricing models for ERP systems under network externality ».
International Journal of Production Economics, vol. 135, nº 2.
pp. 708-715.
Kenné, Jean-Pierre, Dejax, Pierre et Gharbi, Ali.
2012.
« Production planning of a hybrid manufacturing-remanufacturing system under uncertainty within a closed-loop supply chain ».
International Journal of Production Economics, vol. 135, nº 1.
pp. 81-93.
Rivera-Gomez, H., Gharbi, A. et Kenne, J. P..
2012.
« A comparative study of simulation models for the production control of unreliable manufacturing systems ».
In Proceedings of the 4th International Conference on Information Systems, Logistics and Supply Chain : Creative Logistics for an Uncertain World - ILS 2012 (Québec, QC, Canada, Aug. 26-29, 2012)
2011
Benhalla, Samia, Gharbi, Ali et Olivier, Claude.
2011.
« Multi-plant cellular manufacturing design within a supply chain ».
Journal of Operations and Logistics, vol. 4, nº 1.
II.1-II.17.
Berthaut, F., Gharbi, Ali et Dhouib, K..
2011.
« Joint modified block replacement and production/inventory control policy for a failure-prone manufacturing cell ».
Omega, vol. 39, nº 6.
pp. 642-654.
Dehayem Nodem, Fleur Ines, Gharbi, Ali et Kenné, Jean-Pierre.
2011.
« Preventive maintenance and replacement policies for deteriorating production systems subject to imperfect repairs ».
International Journal of Production Research, vol. 49, nº 12.
pp. 3543-3563.
Dehayem Nodem, Fleur Ines, Kenné, Jean-Pierre et Gharbi, Ali.
2011.
« Production planning and repair/replacement switching policy for deteriorating manufacturing systems ».
International Journal of Advanced Manufacturing Technology, vol. 57, nº 5-8.
pp. 827-840.
Dehayem Nodem, Fleur Ines, Kenné, Jean-Pierre et Gharbi, Ali.
2011.
« Simultaneous control of production, repair/replacement and preventive maintenance of deteriorating manufacturing systems ».
International Journal of Production Economics, vol. 134, nº 1.
pp. 271-282.
Gharbi, Ali, Hajji, Adnene et Dhouib, Karem.
2011.
« Production rate control of an unreliable manufacturing cell with adjustable capacity ».
International Journal of Production Research, vol. 49, nº 21.
pp. 6539-6557.
Hajji, Adnene, Gharbi, Ali et Artiba, Abdelhakim.
2011.
« Impact of random delay on replenishment and production control strategies ».
In 4th International Conference on Logistics (LOGISTIQUA) (Hammamet, Tunisia, May 31- June 3, 2011)
pp. 341-348.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Hajji, Adnene, Gharbi, Ali, Kenné, Jean-Pierre et Pellerin, Robert.
2011.
« Production control and replenishment strategy with multiple suppliers ».
European Journal of Operational Research, vol. 208, nº 1.
pp. 67-74.
Hajji, Adnéne, Mhada, Fatima, Gharbi, Ali, Pellerin, Robert et Malham, Roland.
2011.
« Integrated product specifications and productivity decision making in unreliable manufacturing systems ».
International Journal of Production Economics, vol. 129, nº 1.
pp. 32-42.
Mhada, Fatima, Hajji, Adnéne, Malhame, Roland, Gharbi, Ali et Pellerin, Robert.
2011.
« Production control of unreliable manufacturing systems producing defective items ».
Journal of Quality in Maintenance Engineering, vol. 17, nº 3.
pp. 238-253.
Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali.
2011.
« Hierarchical control of production with stochastic demand in manufacturing systems ».
Advanced Modeling and Optimization, vol. 13, nº 3.
pp. 419-443. 2010
Berthaut, F., Gharbi, Ali, Kenné, Jean-Pierre et Boulet, J. F..
2010.
« Improved joint preventive maintenance and hedging point policy ».
International Journal of Production Economics, vol. 127, nº 1.
pp. 60-72.
Berthaut, F., Gharbi, Ali et Pellerin, R..
2010.
« Joint hybrid repair and remanufacturing systems and supply control ».
International Journal of Production Research, vol. 48, nº 14.
pp. 4101-4121.
Dehayem Nodem, Fleur, Kenné, Jean-Pierre et Gharbi, Ali.
2010.
« Preventive maintenance and replacement policies for deteriorating manufacturing systems ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 43, nº 3.
pp. 98-103.
Dellagi, Sofiene, Rezg, Nidhale et Gharbi, Ali.
2010.
« Optimal maintenance/production policy for a manufacturing system subjected to random failure and calling upon several subcontractors ».
International Journal of Management Science and Engineering Management, vol. 5, nº 4.
pp. 261-267.
Dhouib, K., Gharbi, A. et Hajji, A..
2010.
« Performance evaluation of mixed-model transfer lines with acyclic product arrivals and random lot sizing ».
In Proceedings of the 8th ENIM IFAC International Conference of Modeling and Simulation : Evaluation and optimization of innovative production systems of goods and services ; MOSIM’10 (Hammamet, Tunisia, May 10-12, 2010)
pp. 1260-1269.
Lavoisier.
Dhouib, K., Gharbi, A. et Mejri, M..
2010.
« Throughput variability of homogeneous transfer lines subject to operation-dependant failures ».
In Proceedings of the 8th ENIM IFAC International Conference of Modeling and Simulation : Evaluation and optimization of innovative production systems of goods and services ; MOSIM’10 (Hammamet, Tunisia, May 10-12, 2010)
pp. 1290-1299.
Lavoisier.
Dhouib, K., Gharbi, Ali et Landolsi, N..
2010.
« Availability modelling and analysis of multi-product flexible transfer lines subject to random failures ».
International Journal of Advanced Manufacturing Technology, vol. 50, nº 1.
pp. 329-341.
Hajji, A., Gharbi, A. et Pellerin, R..
2010.
« Joint production control and product quality decision making in a failure prone manufacturing system ».
In Proceedings of the 8th ENIM IFAC International Conference of Modeling and Simulation : Evaluation and optimization of innovative production systems of goods and services ; MOSIM’10 (Hammamet, Tunisia, May 10-12, 2010)
pp. 1617-1625.
Lavoisier.
Hajji, Adnene, Gharbi, Ali et Kenné, Jean-Pierre.
2010.
« Joint production and supply control in three levels flexible manufacturing systems ».
Journal of Intelligent Manufacturing, vol. 21, nº 2.
pp. 195-204.
Kenné, Jean-Pierre, Dejax, Pierre et Gharbi, Ali.
2010.
« Production control of a hybrid manufacturing/remanufacturing system in reverse logistics ».
In 3rd International Conference on Information Systems, Logistics and Supply Chain (ILS) (Casablanca, Morocco, Apr. 13-16, 2010)
Lavoie, Philippe, Gharbi, Ali et Kenné, Jean-Pierre.
2010.
« A comparative study of pull control mechanisms for unreliable homogenous transfer lines ».
International Journal of Production Economics, vol. 124, nº 1.
pp. 241-251. 2009
Berthaut, F., Pellerin, R. et Gharbi, Ali.
2009.
« Control of a repair and overhaul system with probabilistic parts availability ».
Production Planning and Control, vol. 20, nº 1.
pp. 57-67.
Boulet, J. F., Gharbi, Ali et Kenné, Jean-Pierre.
2009.
« Multiobjective optimization in an unreliable failure-prone manufacturing system ».
Journal of Quality in Maintenance Engineering, vol. 15, nº 4.
pp. 397-411.
Dehayem Nodem, Fleur, Kenné, Jean-Pierre et Gharbi, Ali.
2009.
« Hierarchical decision making in production and repair/replacement planning with imperfect repairs under uncertainties ».
European Journal of Operational Research, vol. 198, nº 1.
pp. 173-189.
Dhouib, K., Gharbi, Ali et Landolsi, N..
2009.
« Throughput assessment of mixed-model flexible transfer lines with unreliable machines ».
International Journal of Production Economics, vol. 122, nº 2.
pp. 619-627.
Hajji, A., Gharbi, A. et Kenné, J. P..
2009.
« Production and changeover control policies of failure prone buffered flow-shops ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 42, nº 4.
pp. 1108-1113.
Hajji, Adnene, Gharbi, Ali et Kenné, Jean-Pierre.
2009.
« Joint optimal production / changeover policies for n families of products in unreliable supply chains ».
Journal of Operations and Logistics, vol. 2, nº 4.
VI.1-VI.16.
Hajji, Adnene, Gharbi, Ali et Kenné, Jean-Pierre.
2009.
« Joint replenishment and manufacturing activities control in a two stage unreliable supply chain ».
International Journal of Production Research, vol. 47 , nº 12.
pp. 3231-3251.
Hajji, Adnene, Gharbi, Ali, Kenné, Jean-Pierre et Hidehiko, Yamamoto.
2009.
« Production and changeover control policies of a class of failure prone buffered flow-shops ».
Production Planning and Control, vol. 20, nº 8.
pp. 785-800.
Hajji, Adnene, Gharbi, Ali, Kenné, Jean-Pierre et Pellerin, Robert.
2009.
« Production control and replenishment strategy with multiple suppliers ».
In 8e Congrès International de Génie Industriel (Bagnères de Bigorre, France, June 10-12, 2009)
Kenné, Jean-Pierre, Gharbi, Ali et Najid, Najib M..
2009.
« On the integrated production, inventory and preventive maintenance problem in manufacturing systems with backorder ».
International Journal of Simulation and Process Modelling, vol. 5, nº 4.
pp. 300-312.
Lavoie, Philippe, Kenné, Jean-Pierre et Gharbi, Ali.
2009.
« Optimization of production control policies in failure-prone homogenous transfer lines ».
IIE Transactions, vol. 41, nº 3.
pp. 209-222.
Pellerin, R. et Gharbi, Ali.
2009.
« Production control of hybrid repair and remanufacturing systems under general conditions ».
Journal of Quality in Maintenance Engineering, vol. 15, nº 4.
pp. 383-396. 2008
Benhalla, S., Gharbi, Ali et Olivier, Claude.
2008.
« Multi plant cellular manufacturing design within a supply chain ».
In International Conference on Industrial Engineering and Systems Management (IESM) (Beijing, China, May 30-June 2, 2007)
Dehayem Nodem, F. I., Kenné, Jean-Pierre et Gharbi, Ali.
2008.
« A replacement policy of deteriorating production systems subject to imperfect repairs ».
In 3rd IEEE Conference on Industrial Electronics and Applications (ICIEA) (Singapore, Singapore, June 3-5, 2008)
pp. 6-11.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.
Dehayem Nodem, F.I., Kenné, Jean-Pierre et Gharbi, Ali.
2008.
« Joint optimization of capacity expansion, production and maintenance in stochastic manufacturing systems ».
Applied Mathematical Sciences, vol. 2, nº 5.
pp. 195-212. Dellagi, S., Rezg, N. et Gharbi, Ali. 2008. « Contribution au développement d'une politique de maintenance intégrée selon une stratégie de commutation des sous-traitants ». Communication lors de la conférence : 7e Conférence Internationale de Modélisation et Simulation (MOSIM) (Paris, France, 31 mars-2 avril 2008).
Dellagi, S., Rezg, N. et Gharbi, Ali.
2008.
« Contribution au développement d'une politique de maintenance intégrée selon une stratégie de commutation des sous-traitants ».
In 7e Conférence Internationale de Modélisation et Simulation (MOSIM) (Paris, France, 31 mars-2 avril 2008)
Dellagi, S., Rezg, N. et Gharbi, Ali.
2008.
« Optimal policy for a manufacturing system subjected to random failure and calling upon several subcontractors ».
In IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Singapor, Singapor, Dec. 8-11, 2008)
pp. 2127-2131.
Piscataway, N.J. : Institute of Electrical and Electronics Engineers. Dellagi, S., Rezg, N. et Gharbi, Ali. 2008. « Optimal policy for a manufacturing system subjected to random failure and calling upon several subcontractors ». Communication lors de la conférence : IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) (Singapor, Singapor, Dec. 8-11, 2008).
Dhouib, K., Gharbi, Ali et Ayed, S..
2008.
« Availability and throughput of unreliable, unbuffered production lines with non-homogeneous deterministic processing times ».
International Journal of Production Research, vol. 46, nº 20.
pp. 5651-5677.
Dhouib, K, Gharbi, Ali et Ayed, S.
2008.
« Simulation based throughput assessment of non-homogeneous transfer lines ».
International Journal of Simulation Modelling, vol. 8, nº 1.
pp. 5-15.
Gharbi, Ali, Pellerin, Robert et Sadr, Javad.
2008.
« Production rate control for stochastic remanufacturing systems ».
International Journal of Production Economics, vol. 112, nº 1.
pp. 37-47. Hajji, A., Gharbi, Ali et Kenné, Jean-Pierre. 2008. « Operational level-based control policies in supply chain environment ». Communication lors de la conférence : 7e Conférence Internationale de Modélisation et Simulation (MOSIM) (Paris, France, Mar. 31-Apr. 2, 2008).
Hajji, A., Gharbi, Ali et Kenné, Jean-Pierre.
2008.
« Operational level-based control policies in supply chain environment ».
In 7e Conférence Internationale de Modélisation et Simulation (MOSIM) (Paris, France, 31 mars-2avril 2008)
Kenné, Jean-Pierre, Gharbi, Ali et Beit, M.. 2008. « On the integrated production and preventive maintenance problem in manufacturing systems with backorder ». Communication lors de la conférence : 20th European Modeling and Simulation Symposium (EMSS) (Campora San Giovanni, Italy, Sept. 17-19, 2008). St-Georges, K., Pellerin, R., Hajji, A. et Gharbi, Ali. 2008. « Simulating the ERP diffusion behaviour in industrial networks ». Communication lors de la conférence : International Workshop on Enterprise Information Systems (ENTISY) (Sliema, Malta, Oct. 26-31, 2008). 2007
Berthaut, F., Pellerin, R. et Gharbi, Ali.
2007.
« Contrôle de systèmes hybrides de réfection et de réparation avec disponibilité probabiliste des pièces de rechange ».
In 7e Congrès International de Génie Industriel (Trois-Rivières, QC, Canada, 5-8 juin 2007)
Boulet, J.F., Gharbi, Ali et Kenné, Jean-Pierre.
2007.
« Amélioration d'une politique combinée de maintenance et de contrôle d'inventaire dans un contexte manufacturier ».
In 7e Congrès International de Génie Industriel (Trois-Rivières, QC, Canada, 5-8 juin 2007)
Boulet, J.F., Gharbi, Ali et Kenné, Jean-Pierre.
2007.
« Multiobjective optimization of preventive and corrective maintenance policies in unreliable manufacturing systems ».
In International Conference on Industrial Engineering and Systems Management (IESM) (Beijing, China, May 30-June 2, 2007)
Dhouib, K., Gharbi, Ali et Ayed, S..
2007.
« Throughput assessment of non-homogeneous transfer lines: simulation modeling based approach ».
In International Conference on Industrial Engineering and Systems Management (IESM) (Beijing, China, May 30-June 2, 2007)
Fourati, Salma, Chelbi, Anis et Gharbi, Ali.
2007.
« Système de e-maintenance pour l'aide au diagnostic à distance des pannes ».
In 12th International Conference of the Association Information and Management (AIM 2007) (Lausanne, Suisse, 18-19 juin 2007)
France : Association Information and Management (AIM).
Gharbi, Ali, Kenné, Jean-Pierre et Beit, M..
2007.
« Optimal safety stocks and preventive maintenance periods in unreliable manufacturing systems ».
International Journal of Production Economics, vol. 107, nº 2.
pp. 422-434.
Hajji, A., Gharbi, Ali et Kenné, Jean-Pierre.
2007.
« Joint optimal production / setup policies for three family products in unreliable supply chains ».
In International Conference on Industrial Engineering and Systems Management (IESM) (Beijing, China, May 30-June 2, 2007)
Kenné, Jean-Pierre, Gharbi, Ali et Beit, M..
2007.
« Age-dependent production planning and maintenance strategies in unreliable manufacturing systems with lost sale ».
European Journal of Operational Research, vol. 178, nº 2.
pp. 408-420.
Lavoie, P., Kenné, Jean Pierre et Gharbi, Ali.
2007.
« Production control and combined discrete/continuous simulation modeling in failure-prone transfer lines ».
International Journal of Production Research, vol. 45, nº 24.
pp. 5667-5685.
Pellerin, R. et Gharbi, Ali.
2007.
« Production control of remanufacturing systems with general repair time distributions ».
In International Conference on Industrial Engineering and Systems Management (IESM) (Beijing, China, May 30-June 2, 2007)
Pellerin, Robert, Boulet, Jean-François, Gharbi, Ali et Kenné, Jean-Pierre.
2007.
« Développement d'une politique intégrée de contrôle des taux de production et de maintenance corrective avec diagnostic ».
INFOR : Information Systems and Operational Research, vol. 45, nº 4.
pp. 197-207. 2006
Gharbi, Ali, Kenné, Jean-Pierre et Hajji, A..
2006.
« Operational level-based policies in production rate control of unreliable manufacturing systems with setups ».
International Journal of Production Research, vol. 44, nº 3.
pp. 545-567.
Hajji, A., Gharbi, Ali et Kenné, Jean-Pierre.
2006.
« Joint production and supply control in three levels flexible manufacturing systems ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 39, nº 3.
pp. 149-154. 2005
Boulet, J.-F., Gharbi, Ali et Kenné, Jean-Pierre.
2005.
« Production and corrective maintenance rate policy improvement in an unreliable failure prone manufacturing systems ».
In 35th International Conference on Computer and Industrial Engineering (Istanbul, Turkey, June 19-22, 2005)
pp. 321-326.
Dehayem Nodem, F. I., Kenné, Jean-Pierre et Gharbi, Ali.
2005.
« Capacity expansion production and maintenance planning in stochastic manufacturing systems ».
In International Conference on Numerical Analysis and Applied Mathematics (ICNAAM) (Rhodes, Greece, Sept. 16-20, 2005)
pp. 423-427.
Weinheim, Germany : Wiley-VCH Verlag.
Gharbi, Ali et Kenné, Jean Pierre.
2005.
« Maintenance scheduling and production control of multiple-machine manufacturing systems ».
Computers and Industrial Engineering, vol. 48, nº 4.
pp. 693-707.
Gharbi, Ali, Kenné, Jean-Pierre et Boulet, J.-F..
2005.
« Amélioration des taux de production et de maintenance corrective d'un système de production ».
In 6ième Congrès International de Génie Industriel (Besançon, France, 7-10 juin 2005)
Gharbi, Ali, Pellerin, Robert et Sard, J..
2005.
« Production rate control policy for stochastic remanufacturing systems ».
In International Conference on Industrial Engineering and Systems Management (IESM) (Marrakech, Morocco, May 16-19, 2005)
2004
Hajji, Adnene, Gharbi, Ali et Kenné, Jean-Pierre.
2004.
« Production and set-up control of a failure-prone manufacturing system ».
International Journal of Production Research, vol. 42, nº 6.
pp. 1107-1130.
Hurtubise, Stephanie, Olivier, Claude et Gharbi, Ali.
2004.
« Planning tools for managing the supply chain ».
[Article de conférence]. Computers and Industrial Engineering, vol. 46, nº 4.
pp. 763-779.
Kenné, Jean Pierre et Gharbi, Ali.
2004.
« Stohastic optimal production control problem with corrective maintenance ».
Computers and Industrial Engineering, vol. 46, nº 4.
pp. 865-875.
Kenné, Jean-Pierre et Gharbi, Ali.
2004.
« A simulation optimization based control policy for failure prone one-machine, two-product manufacturing systems ».
Computers and Industrial Engineering, vol. 46, nº 2.
pp. 285-292. 2003
Gharbi, Ali et Kenné, Jean Pierre.
2003.
« Optimal production control problem in stochastic multiple-product multiple-machine manufacturing systems ».
IIE Transactions, vol. 35, nº 10.
pp. 941-952.
Hajji, Adnene, Kenné, Jean Pierre et Gharbi, Ali.
2003.
« Production control of an unreliable manufacturing system with setups : a comparative study ».
In IASTED International Conference on Intelligent Systems and Control (Salzburg, Austria, June 25-27, 2003)
pp. 258-263.
Calgary, Canada : ACTA Press.
Kenné, Jean Pierre, Boukas, E. K. et Gharbi, Ali.
2003.
« Control of production and corrective maintenance rates in a multiple-machine, multiple-product manufacturing system ».
Mathematical and Computer Modelling, vol. 38, nº 3-4.
pp. 351-365.
Olivier, Claude, Gharbi, Ali et Hurtubise, S..
2003.
« A two stage hierarchical production planning approach for scheduling agile manufacturing system ».
In 32nd International Conference on Computers & Industrial Engineering (Limerick, Ireland, Aug. 11-13, 2003)
pp. 791-796.
2002
Abdul-Kader, Walid et Gharbi, Ali.
2002.
« Capacity estimation of a multi-product unreliable production line ».
International Journal of Production Research, vol. 40, nº 18.
pp. 4815-4834.
Ndiaye, A., Olivier, C. et Gharbi, A..
2002.
« Design methodology for realistic flexible cellular manufacturing systems ».
In JIT facing the new millennium (Sevilla, Spain, Aug. 26-30, 2000)
Amsterdam, The Netherlands : Elsevier. 2001
Olivier, Claude et Gharbi, Ali, éds.
2001.
« 29th International Conference on Computers and Industrial Engineering, Montréal, Québec, Canada, November 1-3, 2001 : proceedings ».
Montréal, Canada : École de technologie supérieure. 696 p.
Gharbi, Ali, Beauchamp, Yves et Andriamaharosoa, Sylvia.
2001.
« Stratégie de maintenance préventive de type âge: approche basée sur l'integration de la simulation et des plans d'expérience ».
In MOSIM '01 : conference francophone de modélisation et simulation No3 (Troyes, France, Avril 25-27, 2001)
Kenné, Jean Pierre et Gharbi, Ali.
2001.
« A simulation optimization approach in production planning of failure prone manufacturing systems ».
Journal of Intelligent Manufacturing, vol. 12, nº 5-6.
pp. 421-431. 2000
Gharbi, Ali et Kenné, Jean Pierre.
2000.
« Production and preventive maintenance rates control for a manufacturing system : an experimental design approach ».
International Journal of Production Economics, vol. 65, nº 3.
pp. 275-287.
Gharbi, Ali et Kenné, Jean-Pierre.
2000.
« Production and corrective maintenance planning of FMS through simulation optimisation ».
In 4th International Conference on Engineering Design and Automation (Orlando, FL, USA, Aug., 2000)
pp. 446-451.
Hurtubise, Stephanie, Olivier, Claude et Gharbi, Ali.
2000.
« Conceptual framework for management of manufacturing networks ».
In Proceedings of the 1st World Conference on Production and Operations Management (Seville, Spain, Aug. 27-Sept. 1, 2000)
pp. 349-358.
Production and Operations Management Society (POMS).
Kenné, Jean Pierre et Gharbi, Ali.
2000.
« Production planning problem in manufacturing systems with general failure and repair time distributions ».
Production Planning and Control, vol. 11, nº 6.
pp. 581-588.
Kenné, Jean-Pierre et Gharbi, Ali.
2000.
« A Simulation Optimization Based Control Policy for Failure Prone One-Machine, two-Products Manufacturing System ».
In 27th International Conference On Computer and Industrial Engineering (Beijing, China, Oct. 11-13, 2000)
1999Gharbi, Ali et Kenne, J.P.. 1999. « Simulation based experimental design and manufacturing system control ». Communication lors de la conférence : 3rd International Industrial Engineering Conference (Montreal, QC, Canada, May 26-28, 1999).
Gharbi, Ali et Kenné, Jean Pierre.
1999.
« Experimental approach control for unreliable manufacturing systems ».
In 7th IEEE Conference on Emerging Technologies and Factory Automation (Barcelona, Spain, Oct. 18-21, 1999)
pp. 663-669.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Gharbi, Ali et Olivier, Claude.
1999.
« Modélisation par simulation d'un système manufacturier représenté par un réseau complexe d'activités ».
In Deuxième Conférence Francophone de Modélisation et Simulation (Annecy, France, 6-8 oct. 1999)
pp. 251-256.
Gharbi, Ali, Pellerin, Robert et Villeneuve, Laurent.
1999.
« New constraint-based approach for overhaul project scheduling with work space constraints ».
International Journal of Industrial Engineering : Theory Applications and Practice, vol. 6, nº 2.
pp. 123-131.
Kenné, Jean Pierre et Gharbi, Ali.
1999.
« Experimental design in production and maintenance control problem of a single machine, single product manufacturing system ».
International Journal of Production Research, vol. 37, nº 3.
pp. 621-637.
Mohamed-Salah, Ouali, Ait-Kadi, Daoud et Gharbi, Ali.
1999.
« A simulation model for opportunistic maintenance strategies ».
In 7th IEEE International Conference on Emerging Technologies and Factory Automation, 1999. Proceedings. ETFA '99 (Barcelona, Spain, Oct. 18-22, 1999)
pp. 703-708.
IEEE. Olivier, Claude, Gharbi, Ali et Hurtubise, S.. 1999. « Application des techniques d'ordonnancement à la planification des opérations de réfection en contexte de processus continu ». Communication lors de la conférence : 3rd International Industrial Engineering Conference (Montreal, QC, Canada, May 26-28, 1999).
Olivier, Claude, Gharbi, Ali et Hurtubise, S..
1999.
« Application des techniques d’ordonnancement à la planification des opérations de réfection en contexte de processus continu ».
In L'intégration des ressources humaines et des technologies: le défi : 3e Congrès International de Génie Industriel; Montréal, Québec, Mai 1999; actes = Integration of human resources and technologies: the challenge (Montréal, QC, Canada, 28-30 mai 1999)
pp. 1219-1228.
Montréal : Presses Internationales Polytechnique. 1998Gharbi, Ali et Kenne, J.P.. 1998. « Production and preventive maintenance rates control for a FMS: a simulation-based experimental design approach ». Communication lors de la conférence : The Seventh Industrial Engineering Research Conference (Banff, AB, Canada, May, 1998).
Gharbi, Ali, Pellerin, Robert et Villeneuve, Laurent.
1998.
« Zone and resource scheduling in remanufacturing systems ».
In IEEE International Conference on Systems, Man and Cybernetics (San Diego, CA, USA, Oct. 11-14, 1998)
pp. 383-387.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers. 1997
Beaulieu, A., Gharbi, Ali et Kadi, A..
1997.
« An algorithm for the cell formation and the machine selection problems in the design of a cellular manufacturing system ».
International Journal of Production Research, vol. 35, nº 7.
pp. 1857-1874. Drolet, N., Gharbi, Ali et Olivier, Claude. 1997. « Modélisation par simulation discrète d'un environnement d'assemblage à poste fixe ». Communication lors de la conférence : 65e Congrès de l'ACFAS (Trois-Rivières, QC, Canada, mai 1997).
Gharbi, Ali, Girard, Jean, Pellerin, Robert et Villeneuve, Laurent.
1997.
« Bombardier turned to simulation to validate the CF-18 maintenance program ».
Interfaces, vol. 27, nº 6.
pp. 22-34.
Gharbi, Ali et Kenné, Jean Pierre.
1997.
« Production rate control and design problem in a failure prone manufacturing system ».
In 6th Industrial Engineering Research Conference (Miami Beach, FL, USA, May 17-18, 1997)
pp. 813-818.
Norcross, GA, USA : Institute of Industrial Engineers.
Kenné, Jean Pierre, Gharbi, Ali et Boukas, E. K..
1997.
« Control policy simulation based on machine age in a failure prone one-machine, one-product manufacturing system ».
International Journal of Production Research, vol. 35, nº 5.
pp. 1431-1445. Olivier, Claude, Gharbi, Ali et Chayer, M.. 1997. « Problématique de rénovation des cuves d'électrolyse dans une aluminerie ». Communication lors de la conférence : 2e Congrès International Franco-Québécois (Albi, France, sept. 1997).
Villeneuve, L., Gharbi, Ali et Pellerin, R..
1997.
« La réalisation de projets de simulation en entreprise comme catalyseur de changements organisationnels et culturels ».
In Modélisation et simulation des systèmes de production et de logistique MOSIM'97, actes de la première conférence francophone (Rouen, France, 5-6 juin 1997)
Lavoisier-Hermès. Villeneuve, L., Gharbi, Ali et Pellerin, R.. 1997. « Nouvelle approche d'ordonnancement multi-projets pour l'industrie de réfection ». Communication lors de la conférence : 2e Congrès International Franco-Québécois (Albi, France, sept. 1997). 1996
Gharbi, A. et Villeneuve, L..
1996.
« Conception d'un FMS: approche intégrée assistée par ordinateur ».
In 5e Congrès international de génie industriel, 2-3-4 avril 1996, Grenoble, France: GI 5. conférences invitées = 5th International congress of industrial engineering, April 2-3-4, 1996: invited papers (Grenoble, France, 2-4 avril 1996)
pp. 35-42.
Grenoble, France : GI5 : IPI : ENSGI : INPG.
Gharbi, Ali, Pellerin, Robert et Villeneuve, Laurent.
1996.
« A simulation approach for improving the strategic planning of overhaul industries ».
In IEEE Conference on Emerging Technologies and Factory Automation (ETFA) (Kauai, HI, USA, Nov. 18-21, 1996)
pp. 366-371.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Villeneuve, L., Gharbi, A. et Pellerin, R..
1996.
« Planification de projets de réfection avec contraintes de zone ».
In 5e Congrès international de génie industriel, 2-3-4 avril 1996, Grenoble, France: GI 5. conférences invitées = 5th International congress of industrial engineering, April 2-3-4, 1996: invited papers (Grenoble, France, 2-4 avril 1996)
pp. 181-187.
Grenoble, France : GI5 : IPI : ENSGI : INPG. 1995
Gharbi, A., Olivier, C. et Tétreault, M..
1995.
« Environnements flexibles de production: intégration des outils de conception ».
In La productivité dans un monde sans frontières : actes = Productivity in a world without borders congres : proceedings (Montréal, QC, Canada, 18-20 oct. 1995)
pp. 1583-1592.
Montréal : École Polytechnique de Montréal.
Gharbi, A., Pellerin, R. et Villeneuve, L..
1995.
« Improving overhaul project planning through simulation ».
In The proceedings of the 1995 Summer Computer Simulation Conference: twenty-seventh annual Summer Computer Simulation Conference; Ottawa, Ontario, Canada, July 24-26, 1995 (Ottawa, ON, Canada, July 24-26, 1995)
pp. 1109-1113.
San Diego, CA, USA : Summer Computer Simulation.
Gharbi, A. et Villeneuve, L..
1995.
« Performance evaluation for FMS design through simulation-aided financial analysis ».
In International Conference on Industrial Engineering and Production Management, Marrakech, April 4-7, 1995 : proceedings (Marrakech, Maroc, Apr. 4-7, 1995)
Mons, Belgique : FUCAM.
Girard, G., Gharbi, A., Pellerin, R. et Villeneuve, L..
1995.
« La planification stratégique de projets de réfection par simulation ».
In La productivité dans un monde sans frontières : actes = Productivity in a world without borders congres : proceedings (Montréal, QC, Canada, 18-20 oct. 1995)
pp. 1279-1288.
Montréal : École Polytechnique de Montréal.
Khalfoun, M. et Gharbi, A..
1995.
« Sélection d'une configuration d'un FMS : une approche multicritère ».
In La productivité dans un monde sans frontières : actes = Productivity in a world without borders congres : proceedings (Montréal, QC, Canada, 18-20 oct. 1995)
pp. 469-478.
Montréal : École Polytechnique de Montréal. 1994
Dufrene, D., Gharbi, A., Kieffer, J. P., Rebouche, J. Y. et Villeneuve, L..
1994.
« A discrete event simulation methodology for the design of flexible manufacturingsystems: toward the use of an integrated set of models following progressive detail levels ».
In Proceedings of the 1994 Summer Computer Simulation Conference : July 18-20, 1994, Hyatt Regency-La Jolla, San Diego, California : Tewnth-Sixth Annual Summer Computer Simulation Conference (San Diego, CA, USA, July 18-20, 1994)
San Diego, CA, USA : Society for Computer Simulation.
Gharbi, A. et Villeneuve, L..
1994.
« A generic simulation model supported by financial analysis for FMS design ».
In International Symposium on Automotive Technology and Automation : 1994, Aachen, Germany, 31st October-4th November : proceedings for the dedicated Conference on Lean/Agile Manufacturing in the Automotive Industries (Aachen, Germany, Oct. 31-Nov. 4, 1994)
Croydon, UK : Automotive Automation Ltd.. 1993
Beaulieu, A., Ait-Kadi, D. et Gharbi, Ali.
1993.
« Heuristic for flexible machine selection problems ».
In International conference on industrial engineering and production management (Mons, Belgium, June 2-4, 1993)
pp. 98-108.
Beaulieu, A., Gharbi, Ali et Ait-Kadi, D.. 1993. « Conception assistée par ordinateur d'une cellule de fabrication flexible ». Communication lors de la conférence : 61e Congrès de l'ACFAS (Rimouski, QC, Canada, 17-21 mai 1993).
Beaulieu, Alain, Ait-kadi, Daoud et Gharbi, Ali.
1993.
« Heuristic for flexible machine selection problems ».
Journal of Decision Systems, vol. 2, nº 3-4.
pp. 241-253.
Gharbi, Ali et Villeneuve, L..
1993.
« Méthodologie de conception d'ateliers de fabrication flexible, basée sur l'intégration des modèles ».
In 4ème Congrès International de Génie Industriel (Marseille, France, 15-17 déc. 1993)
pp. 37-45.
Marseille, France :
Gharbi, Ali et Villeneuve, L..
1993.
« Simulation: a tool to balance a bufferless multi-product assembly line ».
In International Conference on Industrial Engineering and Production Management (Mons, Belgium, June 2-4, 1993)
pp. 593-602.
1992
Gharbi, A. et Villeneuve, L..
1992.
« L'aspect interactif comme moyen d'introduire la simulation auprès des compagnies manufacturières ».
In Automatisation industrielle : conférence Canadienne et exposition : École de Technologie Supérieure Montréal, 1-3 juin 1992 : actes de la conférence = Industrial automation : Canadian conference and exhibition : Ecole de Technologie Supérieure Montre (Montréal, QC, Canada, 1-3 juin 1992)
34.31-34.34.
Montréal, QC, Canada : International Association for Industrial Automation. |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau