| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Document quand le type de document est "Article publié dans une revue, révisé par les pairs" et l'année est 2009Nombre de documents archivés : 266.
Adankon, Mathias M. et Cheriet, Mohamed.
2009.
« Model selection for the LS-SVM : application to handwriting recognition ».
Pattern Recognition, vol. 42, nº 12.
pp. 3264-3270.
Adankon, Mathias M., Cheriet, Mohamed et Biem, Alain.
2009.
« Semisupervised least squares support vector machine ».
IEEE Transactions on Neural Networks, vol. 20, nº 12.
pp. 1858-1870.
Ahmadi, A., Najjaran, H., Holzman, J. F. et Hoorfar, M..
2009.
« Two-dimensional flow dynamics in digital microfluidic systems ».
Journal of Micromechanics and Microengineering, vol. 19, nº 6.
Al-Haddad, Kamal.
2009.
« Guest editorial ».
IEEE Transactions on Industrial Electronics, vol. 56, nº 8.
pp. 2799-2801.
April, Alain et Abran, Alain.
2009.
« A software maintenance maturity model (S3M) : measurement practices at maturity levels 3 and 4 ».
[Article de conférence]. Electronic Notes in Theoretical Computer Science, vol. 233.
pp. 73-87.
Arteau, Jean.
2009.
« Un équipement de protection individuelle (EPI) conforme à la norme XYZ : pourquoi et comment le reconnaître? ».
Reg@rd sur le Travail, vol. 5, nº 2.
pp. 46-48.
Arz, Jean-Pierre et Laville, Frédéric.
2009.
« Experimental characterization of small thickness elastomeric layers submitted to impact loading ».
Journal of Sound and Vibration, vol. 326, nº 1-2.
pp. 302-313.
Ata, R., Soulaïmani, Azzeddine et Chinesta, F..
2009.
« The natural volume method (NVM): Presentation and application to shallow water inviscid flows ».
International Journal for Numerical Methods in Fluids, vol. 59, nº 1.
pp. 19-45.
Ateme-Nguema, Barthelemy et Dao, Thien-My.
2009.
« Quantized hopfield networks and tabu search for manufacturing cell formation problems ».
International Journal of Production Economics, vol. 121, nº 1.
pp. 88-98.
Awdé, A., Hina, Manolo Dulva, Tadj, Chakib, Bellik, Y. et Ramdane-Cherif, Amar.
2009.
« An adaptive multimodal multimedia computing system for presentation of mathematical expressions to visually-impaired users ».
Journal of Multimedia, vol. 4, nº 4.
pp. 182-195.
Awdé, A., Tadj, Chakib et Bellik, Y..
2009.
« Infrastructure of an adaptive multi-agent system for presentation of mathematical expression to visually-impaired users ».
ISAST Transactions on Computers and Intelligent Systems, vol. 1, nº 1.
pp. 17-27.
Ayari, Houcine, Thomas, Marc, Doré, Sylvie et Serrus, O..
2009.
« Evaluation of lumbar vertebra injury risk to the seated human body when exposed to vertical vibration ».
Journal of Sound and Vibration, vol. 321, nº 1-2.
pp. 454-470.
Ayari, Houcine, Thomas, Marc, Doré, Sylvie, Taïar, Rheda et Dron, Jean-Paul.
2009.
« Predicting the adverse health effects to long term whole-body vibration exposure ».
Acoustique & Techniques , nº 58.
pp. 44-62.
Badarneh, Osamah S. et Kadoch, Michel.
2009.
« Multicast routing protocols in mobile ad hoc networks : a comparative survey and taxonomy ».
EURASIP Journal on Wireless Communications and Networking, vol. 2009.
Balout, B., Masounave, Jacques et Songmene, Victor.
2009.
« Modeling of eutectic macrosegregation in centrifugal casting of thin walled ZA8 zinc alloy ».
Journal of Materials Processing Technology, vol. 209, nº 18-19.
pp. 5955-5963.
Baraer, M., McKenzie, J. M., Mark, B. G., Bury, J. et Knox, S..
2009.
« Characterizing contributions of glacier melt and groundwater during the dry season in a poorly gauged catchment of the Cordillera Blanca (Peru) ».
Advances in Geosciences, vol. 22.
pp. 41-49.
Baril, Yannick, Brailovski, Vladimir, Chartrand, M., Terriault, Patrick et Cartier, R..
2009.
« Median sternotomy : comparative testing of braided superelastic and monofilament stainless steel sternal sutures ».
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol. 223, nº H3.
pp. 363-374.
Barré, Arnaud, Aissaoui, Rachid, Jolles, Brigitte M. et Aminian, Kamiar.
2009.
« Geometric distribution of the soft tissue deformation during treadmill gait : a preliminary result ».
[Résumé d'une communication à une conférence]. Gait and Posture, vol. 30, nº suppl.2.
s132.
Bélanger, Pierre, Berry, Alain, Pasco, Yann, Robin, Olivier, St-Amant, Yves et Rajan, Srivatsa.
2009.
« Multi-harmonic active structural acoustic control of a helicopter main transmission noise using the principal component analysis ».
Applied Acoustics, vol. 70, nº 1.
pp. 153-164.
Bélanger, Pierre et Cawley, Peter.
2009.
« Feasibility of low frequency straight-ray guided wave tomography ».
NDT and E International, vol. 42, nº 2.
pp. 113-119.
Ben Ayed, Ismail, Li, Shuo et Ross, Ian.
2009.
« A statistical overlap prior for variational image segmentation ».
International Journal of Computer Vision, vol. 85, nº 1.
pp. 115-132.
Ben Ayed, Ismail, Li, Shuo et Ross, Ian.
2009.
« Embedding overlap priors in variational left ventricle tracking ».
IEEE Transactions on Medical Imaging, vol. 28, nº 12.
pp. 1902-1913.
Ben Ayed, Ismail, Li, Shuo, Ross, Ian et Islam, Ali.
2009.
« Myocardium tracking via matching distributions ».
International Journal of Computer Assisted Radiology and Surgery, vol. 4, nº 1.
pp. 37-44.
Benazza, Tewfik et Chaallal, Omar.
2009.
« Conception sismique des murs de refend couplés, selon la norme canadienne Calcul des ouvrages en béton 2004 et le Code national du bâtiment – Canada 2005 ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 36, nº 7.
pp. 1221-1237.
Bengherabi, Messaoud, Mezai, Lamia, Harizi, Farid, Guessoum, Abderrazak et Cheriet, Mohamed.
2009.
« 2DPCA-based techniques in DCT domain for face recognition ».
International Journal of Intelligent Systems Technologies and Applications, vol. 7, nº 3.
pp. 243-265.
Bergamini, Cheila, Oliveira, Luis S., Koerich, Alessandro L. et Sabourin, Robert.
2009.
« Combining different biometric traits with one-class classification ».
Signal Processing, vol. 89, nº 11.
pp. 2117-2127.
Berrhouma, Nabil, Laporte, Claude Yvon, Doucet, M. et April, Alain.
2009.
« Mesure du coût de la qualité logicielle d’un projet d’envergure de la société Bombardier Transport ».
Génie logiciel, nº 88.
pp. 47-57.
Berthaut, F., Pellerin, R. et Gharbi, Ali.
2009.
« Control of a repair and overhaul system with probabilistic parts availability ».
Production Planning and Control, vol. 20, nº 1.
pp. 57-67.
Bigras, Pascal.
2009.
« Reduced nonlinear observer for bounded estimation of the static friction model with the Stribeck effect ».
Systems & Control Letters, vol. 58, nº 2.
pp. 119-123.
Blanchard, F., Sharma, G., Ropagnol, X., Razzari, L., Morandotti, R. et Ozaki, T..
2009.
« Improved terahertz two-color plasma sourcespumped by high intensity laser beam ».
Optics Express, vol. 17, nº 8.
pp. 6044-6052.
Bonenfant, Danielle, Kharoune, Lynda, Sauvé, Sébastien, Hausler, Robert, Niquette, Patrick, Mimeault, Murielle et Kharoune, Mourad.
2009.
« Molecular analysis of carbon dioxide adsorption processes on steel slag oxides ».
International Journal of Greenhouse Gas Control, vol. 3, nº 1.
pp. 20-28.
Bonenfant, Danielle, Niquette, Patrick, Mimeault, Murielle, Furtos-Matei, Alexandra et Hausler, Robert.
2009.
« UV-VIS and FTIR spectroscopic analyses of inclusion complexes of nonylphenol and nonylphenol ethoxylate with beta-cyclodextrin ».
Water Research, vol. 43, nº 14.
pp. 3575-3581.
Boudy, Frédéric et Seers, Patrice.
2009.
« Impact of physical properties of biodiesel on the injection process in a common-rail direct injection system ».
Energy Conversion and Management, vol. 50, nº 12.
pp. 2905-2912.
Boukadi, Khouloud, Chaabane, Amin et Vincent, Lucien.
2009.
« Context-aware business processes modelling: Concepts, issues and framework ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 42, nº 4.
pp. 1376-13881.
Boulet, J. F., Gharbi, Ali et Kenné, Jean-Pierre.
2009.
« Multiobjective optimization in an unreliable failure-prone manufacturing system ».
Journal of Quality in Maintenance Engineering, vol. 15, nº 4.
pp. 397-411.
Bousselham, Abdelhak et Chaallal, Omar.
2009.
« Maximum shear strength of RC beams retrofitted in shear with FRP composites ».
Journal of Composites for Construction, vol. 13, nº 4.
pp. 302-314.
Boutin, Mathieu, Despins, Charles, Denidni, Tayeb et Affès, Sofiène.
2009.
« A novel interference safety margin for cognitive radio MANET using smart antennas ».
Journal of Communications, vol. 4, nº 4.
pp. 257-266.
Bouzid, Hakim.
2009.
« On the effect of external bending loads in bolted flange joints ».
Journal of Pressure Vessel Technology, vol. 131, nº 2.
Briot, Sébastien et Bonev, Ilian.
2009.
« Pantopteron : a new fully decoupled 3DOF translational parallel robot for pick-and-place applications ».
Journal of Mechanisms and Robotics, vol. 1, nº 2.
Briot, Sébastien, Bonev, Ilian, Gosselin, C. M. et Arakelian, V..
2009.
« Complete shaking force and shaking moment balancing of planar parallel manipulators with prismatic pairs ».
Proceedings of the Institution of Mechanical Engineers, Part K: Journal of Multi-Body Dynamics, vol. 223, nº 1.
pp. 43-52.
Brown, Kevin R., Otasek, David, Ali, Muhammad, McGuffin, Michael John, Xie, Wing, Devani, Baiju, van Toch, Ian Lawson et Jurisica, Igor.
2009.
« NAViGaTOR : network analysis, visualization and graphing Toronto ».
Bioinformatics, vol. 25, nº 24.
pp. 3327-3329.
Bui, Chuong, Villoutreix, Gilbert et Nguyen-Tri, Phuong.
2009.
« Effect of recycling process in twin screws extruder HAAK on structure and crystallization behaviour of polypropylene ».
Vietnam Journal of Chemistry, vol. 47, nº 2.
pp. 257-262.
Canetto, Pierre, Voix, Jérémie, Berger, Elliott H., Jacques, Jean et Liedtke, Martin.
2009.
« Hearing protectors “real-world” performance and the european directive 2003/10/EC ».
International Journal of Occupational Safety and Ergonomics, vol. 15, nº 2.
pp. 221-226.
Cao, X. et Jahazi, M..
2009.
« Effect of welding speed on butt joint quality of Ti–6Al–4V alloy welded using a high-power Nd:YAG laser ».
Optics and Lasers in Engineering, vol. 47, nº 11.
pp. 1231-1241.
Cao, X. et Jahazi, M..
2009.
« Effect of welding speed on the quality of friction stir welded butt joints of a magnesium alloy ».
Materials and Design, vol. 30, nº 6.
pp. 2033-2042.
Cao, X., Rivaux, B., Jahazi, M., Cuddy, J. et Birur, A..
2009.
« Effect of pre- and post-weld heat treatment on metallurgical and tensile properties of Inconel 718 alloy butt joints welded using 4 kW Nd:YAG laser ».
Journal of Materials Science, vol. 44, nº 17.
pp. 4557-4571.
Cavalin, Paulo Rodrigo, Sabourin, Robert, Suen, Ching Y. et Britto, Alceu de Souza.
2009.
« Evaluation of incremental learning algorithms for HMM in the recognition of alphanumeric characters ».
Pattern Recognition, vol. 42, nº 12.
pp. 3241-3253.
Chaabane, Amin, Paquet, Marc et Ramudhin, Amar.
2009.
« Designing and evaluating sustainable supply chains : a carbon market oriented approach ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 42, nº 4.
pp. 2029-2034.
Chaib, S., Saad, M., Abou, S. C. et Boutat, D..
2009.
« Detection of actuator faults in flight control systems ».
Canadian Aeronautics and Space Journal = Journal Aéronautique et Spatial du Canada, vol. 55, nº 3.
pp. 133-143.
Châtelain, Benoît, Bélanger, Michel P., Tremblay, Christine, Gagnon, François et Plant, David V..
2009.
« Topological wavelength usage estimation in transparent wide area networks ».
Journal of Optical Communications and Networking, vol. 1, nº 1.
pp. 196-203.
Chatterjee, Kishore, Ghodke, D. V., Chandra, Ambrish et Al Haddad, Kamal.
mars 2009.
« Simple controller for STATCOM-based var generators ».
IET Power Electronics, vol. 2, nº 2.
pp. 192-202.
Cheriet, Mohamed, Bunke, Horst, Hu, Jianying, Kimura, Fumitaka et Suen, Ching Y..
2009.
« New frontiers in handwriting recognition ».
Pattern Recognition, vol. 42, nº 12.
pp. 3129-3130.
Cheriet, Mohamed, El Yacoubi, Mounim, Fujisawa, Hiromichi, Lopresti, Daniel et Lorette, Guy.
2009.
« Handwriting recognition research : twenty years of achievement... and beyond ».
Pattern Recognition, vol. 42, nº 12.
pp. 3131-3135.
Chouinard, Marc, Ait-Kadi, D., Van Wassenhove, L. et D'Amours, S..
2009.
« Conceptual framework for the design and management of value loops - Application to a wheelchair allocation context ».
Production Planning and Control, vol. 20, nº 8.
pp. 703-723.
Coman, E., Ghosh, K., Jahazi, M. et Dubourg, L..
2009.
« A study of the deformation and residual stress in an aircraft fuselage panel welded by friction stir welding ».
International Journal of Advanced Manufacturing System, vol. 11, nº 2.
pp. 75-84.
Cornick, Steve, Alan Dalgliesh, W. et Maref, Wahid.
2009.
« Sensitivity of hygrothermal analysis to uncertainty in rain data ».
Journal of ASTM International, vol. 6, nº 4.
pp. 1-15.
Coutu, Daniel, Brailovski, Vladimir et Terriault, Patrick.
2009.
« Promising benefits of an active-extrados morphing laminar wing ».
Journal of Aircraft, vol. 46, nº 2.
pp. 730-731.
Cresson, T., Godbout, B., Branchaud, D., Chav, R., Chaibi, Y., Aubert, B., Skalli, W. et de Guise, J. A..
2009.
« Performing fast 3D reconstruction of the knee from biplanar X-ray images through moving least squares deformation for surgical planning ».
[Article de conférence]. International Journal of Computer Assisted Radiology and Surgery, vol. 4, nº suppl. 1.
pp. 113-114.
Dalpé, B. et Masson, Christian.
2009.
« Numerical simulation of wind flow near a forest edge ».
Journal of Wind Engineering and Industrial Aerodynamics, vol. 97, nº 5-6.
pp. 228-241.
De Jesus-Mota, Sandrine, Beaulieu, M. Nadeau et Botez, Ruxandra.
2009.
« Identification of a MIMO state space model of an F/A-18 aircraft using a subspace method ».
Aeronautical Journal, vol. 113, nº 1141.
pp. 183-190.
Dehayem Nodem, Fleur, Kenné, Jean-Pierre et Gharbi, Ali.
2009.
« Hierarchical decision making in production and repair/replacement planning with imperfect repairs under uncertainties ».
European Journal of Operational Research, vol. 198, nº 1.
pp. 173-189.
Demers, V., Brailovski, Vladimir, Prokoshkin, S. D. et Inaekyan, K. E..
2009.
« Optimization of the cold rolling processing for continuous manufacturing of nanostructured Ti-Ni shape memory alloys ».
Journal of Materials Processing Technology, vol. 209, nº 6.
pp. 3096-3105.
Demers, V., Brailovski, Vladimir, Prokoshkin, S. D. et Inaekyan, K. E..
2009.
« Thermomechanical fatigue of nanostructured Ti-Ni shape memory alloys ».
Materials Science and Engineering: A, vol. 513-514.
pp. 185-196.
Desjardins-David, Isabelle et Arteau, Jean.
2009.
« Méthodologie d’analyse des solutions SST pour convaincre les différents intervenants ».
Revue Internationale sur l'Ingénierie des Risques Industriels, vol. 2, nº 1.
pp. 1-14.
Deslandes, Dominic et Boone, François.
2009.
« An iterative design procedure for the synthesis of generalized dual-bandpass filters ».
International Journal of RF and Microwave Computer-Aided Engineering, vol. 19, nº 5.
pp. 607-614.
Deslandes, Dominic, Boone, François et Wu, Ke.
2009.
« Composite corporate traveling-wave power dividers for slot array waveguide antennas ».
International Journal of RF and Microwave Computer-Aided Engineering, vol. 19, nº 2.
pp. 177-186.
Dhouib, K., Gharbi, Ali et Landolsi, N..
2009.
« Throughput assessment of mixed-model flexible transfer lines with unreliable machines ».
International Journal of Production Economics, vol. 122, nº 2.
pp. 619-627.
di Costanzo, Alexandre, Dias de Assuncao, Marcos et Buyya, Rajkumar.
2009.
« Harnessing cloud technologies for a virtualized distributed computing infrastructure ».
IEEE Internet Computing, vol. 13, nº 5.
pp. 24-33.
Diany, Mohammed et Bouzid, Hakim.
2009.
« Analytical evaluation of stresses and displacements of stuffing-box packing based on a flexibility analysis ».
Tribology International, vol. 42, nº 6.
pp. 980-986.
Diany, Mohammed et Bouzid, Hakim.
2009.
« Short term relaxation modeling of valve stem packings ».
Journal of Tribology, vol. 131, nº 3.
Dias de Assuncao, Marcos et Buyya, Rajkumar.
2009.
« Performance analysis of allocation policies for interGrid resource provisioning ».
Information and Software Technology, vol. 51, nº 1.
pp. 42-55.
Dolez, Patricia et Vu-Khanh, Toan.
2009.
« Recent developments and needs in materials used for personal protective equipment and their testing ».
International Journal of Occupational Safety and Ergonomics, vol. 15, nº 4.
pp. 347-362.
Domingue, Frédéric, Fouladi, Siamak, Kouki, Ammar B. et Mansour, Raafat R..
2009.
« Design methodology and optimization of distributed MEMS matching networks for low-microwave-frequency applications ».
IEEE Transactions on Microwave Theory and Techniques, vol. 57, nº 12.
pp. 3030-3041.
Doré, Vincent et Cheriet, Mohamed.
2009.
« Robust NL-means filter with optimal pixel-wise smoothing parameter for statistical image denoising ».
IEEE Transactions on Signal Processing, vol. 57, nº 5.
pp. 1703-1716.
Dos Santos, Eulanda M., Sabourin, Robert et Maupin, Patrick.
2009.
« Overfitting cautious selection of classifier ensembles with genetic algorithms ».
Information Fusion, vol. 10, nº 2.
pp. 150-162.
Doutres, Olivier, Dauchez, Nicolas, Génevaux, Jean-Michel et Dazel, Olivier.
2009.
« A frequency independent criterion for describing sound absorbing materials by a limp frame model ».
Acta Acustica united with Acustica, vol. 95, nº 1.
pp. 178-181.
Dragoi, Andrei et Kara, Nadjia.
2009.
« Ubiquitous and personalised contextual biomonitoring ».
International Journal of Healthcare Technology and Management, vol. 10, nº 1/2.
pp. 27-48.
Dubé, M., Hubert, P., Yousefpour, A. et Denault, J..
2009.
« Fatigue failure characterisation of resistance-welded thermoplastic composites skin/stringer joints ».
International Journal of Fatigue, vol. 31, nº 4.
pp. 719-725.
Duong, L., Cheriet, F., Labelle, H., Cheung, K. M. C., Abel, M. F., Newton, P. O., McCall, R. E., Lenke, L. G. et Stokes, I. A. F..
2009.
« Interobserver and intraobserver variability in the identification of the lenke classification lumbar modifier in adolescent idiopathic scoliosis ».
Journal of Spinal Disorders and Techniques, vol. 22, nº 6.
pp. 448-455.
Duong, Luc, Mac-Thiong, Jean-Marc, Cheriet, Farida et Labelle, Hubert.
2009.
« Three-dimensional subclassification of Lenke type 1 scoliotic curves ».
Journal of Spinal Disorders and Techniques, vol. 22, nº 2.
pp. 135-143.
Duong, Luc, Mac-Thiong, Jean-Marc et Labelle, Hubert.
2009.
« Real time noninvasive assessment of external trunk geometry during surgical correction of adolescent idiopathic scoliosis ».
Scoliosis, vol. 4.
Eftekhari, Armin, Abrishami Moghaddam, Hamid, Forouzanfar, Mohamad et Alirezaie, Javad.
2009.
« Incremental local linear fuzzy classifier in fisher space ».
EURASIP Journal on Advances in Signal Processing, vol. 2009, nº 1.
El-Rich, Marwan, Arnoux, Pierre-Jean, Wagnac, Éric, Brunet, Christian et Aubin, Carl-Eric.
2009.
« Finite element investigation of the loading rate effect on the spinal load-sharing changes under impact conditions ».
Journal of Biomechanics, vol. 42, nº 9.
pp. 1252-1262.
Esmailzadeh, M., Lakis, A. A., Thomas, Marc et Marcouiller, L..
2009.
« Prediction of the response of a thin structure subjected to a turbulent boundary-layer-induced random pressure field ».
Journal of Sound and Vibration, vol. 328, nº 1-2.
pp. 109-128.
Essid, C., Ben Salah, M. B., Kochlef, K., Samet, A. et Kouki, A..
2009.
« Spatial-spectral formulation of method of moment for rigorous analysis of microstrip structures ».
Progress in Electromagnetics Research Letters, vol. 6.
pp. 17-26.
Favre, Julien, Aissaoui, Rachid, Jolles, Brigitte M., de Guise, Jacques A. et Aminian, Kamiar.
2009.
« Functional calibration procedure for 3D knee joint angle description using inertial sensors ».
Journal of Biomechanics, vol. 42, nº 14.
pp. 2330-2335.
Fechine, G. J. M., Rosa, D. S., Rezende, M. E. et Demarquette, N. R..
2009.
« Effect of UV radiation and pro-oxidant on PP biodegradability ».
Polymer Engineering and Science, vol. 49, nº 1.
pp. 123-128.
Feng, Zhengkun, Champliaud, Henri et Dao, Thien-My.
2009.
« Numerical study of non-kinematical conical bending with cylindrical rolls ».
Simulation Modelling Practice and Theory, vol. 17, nº 10.
pp. 1710-1722.
Feng, Zhengkun, Soulaïmani, Azzeddine et Saad, Y..
2009.
« Nonlinear Krylov acceleration for CFD-based aeroelasticity ».
Journal of Fluids and Structures, vol. 25, nº 1.
pp. 26-41.
Fnaiech, Nader, Fnaiech, Farhat, Jervis, B. W. et Cheriet, Mohamed.
2009.
« The combined statistical stepwise and iterative neural network pruning algorithm ».
Intelligent Automation and Soft Computing, vol. 15, nº 4.
pp. 573-589.
Forgues, Daniel et Koskela, Lauri.
2009.
« The influence of a collaborative procurement approach using integrated design in construction on project team performance ».
International Journal of Managing Projects in Business, vol. 2, nº 3.
pp. 370-385.
Forgues, Daniel, Koskela, Lauri et Lejeune, Albert.
2009.
« Information technology as boundary object for transformational learning ».
Journal of Information Technology in Construction, vol. 14.
pp. 48-58.
Gagné, François, André, Chantale, Cejka, Patrick, Blaise, Christian et Hausler, Robert.
2009.
« Reduction of alkali-labile phosphates in mussels exposed to primary-treated wastewaters undergoing ozone and ultraviolet disinfection: A pilot study ».
Water Quality Research Journal of Canada, vol. 44, nº 2.
pp. 161-165.
Gagné, René, Belzile, Jean et Thibeault, Claude.
2009.
« From synchronous to GALS : a new architecture for FPGAs ».
Microelectronics Journal, vol. 40, nº 11.
pp. 1657-1666.
Gagnon, Dany, Verrier, Mary C., Masani, Kei, Nadeau, Sylvie, Aissaoui, Rachid et Popovic, Milos R..
2009.
« Effects of trunk impairments on manual wheelchair propulsion among individuals with a spinal cord injury : a brief overview and future challenges ».
Topics in Spinal Cord Injury Rehabilitation, vol. 15, nº 2.
pp. 59-70.
Gagnon, Ghyslain, Choquette, Francis, Belzile, Jean et Gagnon, François.
2009.
« Minimisation of carrier frequency acquisition time in QAM systems ».
Electronics Letters, vol. 45, nº 5.
pp. 276-278.
Gagnon, Martin, Tahan, Antoine et Coutu, André.
2009.
« Uncertainty in operational modal analysis of hydraulic turbine components ».
[Article de conférence]. International Journal of Fluid Machinery and Systems, vol. 2, nº 4.
pp. 278-285.
Gargour, Christian, Gabrea, Gheorghe Marcel, Ramachandran, Venkat et Lina, Jean-Marc.
2009.
« A short introduction to wavelets and their applications ».
IEEE Circuits and Systems Magazine, vol. 9, nº 2.
pp. 57-68.
Gaudreault, N., Mezghani, N., Turcot, K., Boivin, K., Hagemeister, N. et deGuise, J. A..
2009.
« Effects of physiotherapy treatment on knee OA gait data using cluster analysis ».
[Résumé d'une communication à une conférence]. Osteoarthritis and Cartilage, vol. 17, nº suppl. 1.
S90-S91.
Génevaux, J. M., Dauchez, N. et Doutres, O..
2009.
« Nonlinear damping of a plate using Faraday instability of a fluid film ».
Journal of Sound and Vibration, vol. 326, nº 1–2.
pp. 150-160.
Georges, Thomas, Brailovski, Vladimir, Morellon, Emeric, Coutu, Daniel et Terriault, Patrick.
2009.
« Design of shape memory alloy actuators for morphing laminar wing with flexible extrados ».
Journal of Mechanical Design, vol. 131, nº 9.
0910061-0910069.
Gherbi, Abdelouahed et Khendek, Ferhat.
2009.
« From UML/SPT models to schedulability analysis: approach and a prototype implementation using ATL ».
Automated Software Engineering, vol. 16, nº 3-4.
pp. 387-414.
Girard, Matthieu, Nikiema, Josiane, Brzezinski, Ryszard, Buelna, Gerardo et Heitz, Michèle.
2009.
« A review of the environmental pollution originating from the piggery industry and of the available mitigation technologies: Towards the simultaneous biofiltration of swine slurry and methane ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 36, nº 12.
pp. 1946-1857.
Glavas, Panagiotis, Mac-Thiong, Jean-Marc, Parent, Stefan, de Guise, Jacques A. et Labelle, Hubert.
2009.
« Assessment of lumbosacral kyphosis in spondylolisthesis : a computer-assisted reliability study of six measurement techniques ».
European Spine Journal, vol. 18, nº 2.
pp. 212-217.
Grigorie, Teodor Lucian et Botez, Ruxandra.
2009.
« Adaptive neuro-fuzzy inference system-based controllers for smart material actuator modelling ».
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 223, nº 6.
pp. 655-668.
Grigorie, Teodor Lucian, Botez, Ruxandra et Popov, Andrei Vladimir.
2009.
« Adaptive neuro-fuzzy controllers for an open-loop morphing wing system ».
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 223, nº 7.
pp. 965-975.
Grimault, Stéphan, Robitaille, Nicolas, Grova, Christophe, Lina, Jean-Marc, Dubarry, Anne-Sophie et Jolicoeur, Pierre.
2009.
« Oscillatory activity in parietal and dorsolateral prefrontal cortex during retention in visual short-term memory : additive effects of spatial attention and memory load ».
Human Brain Mapping, vol. 30, nº 10.
pp. 3378-3392.
Hacini, L., Lê, Van Ngan et Bocher, Philippe.
2009.
« Evaluation of residual stresses induced by robotized hammer peening by the contour method ».
Experimental Mechanics, vol. 49, nº 6.
pp. 775-783.
Haghshenas, M., Zarei-Hanzaki, A. et Jahazi, M..
2009.
« An investigation to the effect of deformation-heat treatment cycle on the eutectic morphology and mechanical properties of a Thixocast A356 alloy ».
Materials Characterization, vol. 60, nº 8.
pp. 817-823.
Hajji, A., Gharbi, A. et Kenné, J. P..
2009.
« Production and changeover control policies of failure prone buffered flow-shops ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 42, nº 4.
pp. 1108-1113.
Hajji, Adnene, Gharbi, Ali et Kenné, Jean-Pierre.
2009.
« Joint optimal production / changeover policies for n families of products in unreliable supply chains ».
Journal of Operations and Logistics, vol. 2, nº 4.
VI.1-VI.16.
Hajji, Adnene, Gharbi, Ali et Kenné, Jean-Pierre.
2009.
« Joint replenishment and manufacturing activities control in a two stage unreliable supply chain ».
International Journal of Production Research, vol. 47 , nº 12.
pp. 3231-3251.
Hajji, Adnene, Gharbi, Ali, Kenné, Jean-Pierre et Hidehiko, Yamamoto.
2009.
« Production and changeover control policies of a class of failure prone buffered flow-shops ».
Production Planning and Control, vol. 20, nº 8.
pp. 785-800.
Harrison, J. W., Feme, F. P., Hefford, S. W., Samson, C., Kusevic, K., Mrstik, P. et Lies, P. J. W..
2009.
« Finding anomalies in high-density LiDAR point clouds ».
Geomatica, vol. 63, nº 4.
pp. 397-405.
Hefford, S. W., Samson, C., Harrison, J. W., Ferrie, F. R., Kusevic, K., Mrstik, P. et Iies, P. J. W..
2009.
« Augmenting the iterative closest point (ICP) alignment algorithm with intensity ».
Geomatica, vol. 63, nº 4.
pp. 407-418.
Hejazi, S. M., Talhi, C. et Debbabi, M..
2009.
« Extraction of forensically sensitive information from windows physical memory ».
Digital Investigation, vol. 6, nº suppl..
S121-S131.
Hina, Manolo Dulva, Ramdane-Cherif, Amar, Tadj, Chakib et Lévy, Nicole.
2009.
« Infrastructure of a context adaptive and pervasive multimodal multimedia computing system ».
Journal of Information, Intelligence and Knowledge, vol. 1, nº 3.
pp. 281-308.
Houssin, Remy et Gardoni, Mickaël.
2009.
« Software framework for the approach : computer aided safety integration in design process (CASID) ».
Journal of Advanced Manufacturing Systems, vol. 8, nº 1.
pp. 27-45.
Humbert, L., De Guise, J. A., Godbout, B., Cresson, T., Aubert, B., Branchaud, D., Chav, R., Gravel, P., Parent, S., Dubousset, J. et Skalli, W..
2009.
« Fast 3D reconstruction of the spine from biplanar radiography : A diagnosis tool for routine scoliosis diagnosis and research in biomechanics ».
[Article de conférence]. Computer Methods in Biomechanics and Biomedical Engineering, vol. 12, nº suppl. 1.
pp. 151-152.
Humbert, Ludovic, de Guise, Jacques A., Aubert, Benjamin, Godbout, Benoît et Skalli, Wafa.
2009.
« 3D reconstruction of the spine from biplanar X-rays using parametric models based on transversal and longitudinal inferences ».
Medical Engineering and Physics, vol. 31, nº 6.
pp. 681-687.
Humbert, M., Moreau, A., Uta, E., Gey, N., Bocher, Philippe et Bescond, C..
2009.
« Analysis of backscattered ultrasound amplitude of Ti-5.8Al-4Sn-3.5Zr-0.7Nb-0.5Mo-0.3Si samples in terms of their microstructures and local textures ».
Acta Materialia, vol. 57, nº 3.
pp. 708-714.
Ibrahim, H., Dimitrova, M., Ilinca, A. et Perron, J..
2009.
« Système hybride éolien-diesel avec stockage d'air comprimé pour l'électrification d'une station de télécommunications isolée ».
European Journal of Electrical Engineering = Revue Internationale de Génie Électrique, vol. 12, nº 5-6.
pp. 701-731.
Inaekyan, K. E., Brailovski, Vladimir, Prokoshkin, S. D., Korotitskiy, A. V. et Glezer, A. M..
2009.
« Characterization of amorphous and nanocrystalline Ti-Ni-based shape memory alloys ».
Journal of Alloys and Compounds, vol. 473, nº 1-2.
pp. 71-78.
Jorio, Hasnaa, Jin, Yaomin, Elmrini, Hicham, Nikiema, Josiane, Brzezinski, Ryszard et Heitz, Michèle.
2009.
« Treatment of VOCs in biofilters inoculated with fungi and microbial consortium ».
Environmental Technology, vol. 30, nº 5.
pp. 477-485.
Joulin, Annabelle, Younsi, Zohir, Zalewski, Laurent, Rousse, Daniel et Lassue, Stéphane.
2009.
« A numerical study of the melting of phase change material heated from a vertical wall of a rectangular enclosure ».
International Journal of Computational Fluid Dynamics, vol. 23, nº 7.
pp. 553-566.
Kaddissi, Claude, Saad, Maarouf et Kenné, Jean-Pierre.
2009.
« Interlaced backstepping and integrator forwarding for nonlinear control of an electrohydraulic active suspension ».
Journal of Vibration and Control, vol. 15, nº 1.
pp. 101-131.
Kaddoum, Georges, Chargé, P. et Roviras, D..
2009.
« A generalized methodology for bit-error-rate prediction in correlation-based communication schemes using chaos ».
IEEE Communications Letters, vol. 13, nº 8.
pp. 567-569.
Kaddoum, Georges, Chargé, P., Roviras, D. et Fournier-Prunaret, D..
2009.
« A methodology for bit error rate prediction in chaos-based communication systems ».
Circuits, Systems, and Signal Processing, vol. 28, nº 6.
pp. 925-944.
Kaddoum, Georges, Roviras, Daniel, Chargé, Pascal et Fournier-Prunaret, Danièle.
2009.
« Accurate bit error rate calculation for asynchronous chaos-based DS-CDMA over multipath channel ».
EURASIP Journal on Advances in Signal Processing, vol. 2009.
Kaddoum, Georges, Roviras, Daniel, Chargé, Pascal et Fournier-Prunaret, Danièle.
2009.
« Robust synchronization for asynchronous multi-user chaos-based DS-CDMA ».
Signal Processing, vol. 89, nº 5.
pp. 807-818.
Kanaan, Hadi Y., Al Haddad, Kamal, Hayek, A. et Mougharbel, I..
2009.
« Design, study, modelling and control of a new single-phase high power factor rectifier based on the single-ended primary inductance converter and the Sheppard-Taylor topology ».
IET Power Electronics, vol. 2, nº 2.
pp. 163-177.
Kanaan, Hadi Y., Al Haddad, Kamal et Salloum, Georges.
2009.
« Study, modelling and control of a single-phase power factor corrector based on the Sheppard-Taylor topology ».
International Journal of Power Electronics, vol. 1, nº 4.
pp. 434-459.
Kanaan, Hadi Y., Sauriol, G. et Al Haddad, Kamal.
2009.
« Small-signal modelling and linear control of a high efficiency dual boost single-phase power factor correction circuit ».
IET Power Electronics, vol. 2, nº 6.
pp. 665-674.
Kara, Nadjia.
2009.
« Mobility management approaches for mobile IP networks: Performance comparison and use recommendations ».
IEEE Transactions on Mobile Computing, vol. 8, nº 10.
pp. 1312-1325.
Kawashima, T., Nakamura, M., Bouix, S., Kubicki, M., Salisbury, D. F., Westin, C. F., McCarley, R. W. et Shenton, M. E..
2009.
« Uncinate fasciculus abnormalities in recent onset schizophrenia and affective psychosis: A diffusion tensor imaging study ».
Schizophrenia Research, vol. 110, nº 1-3.
pp. 119-126.
Kechroud, R., Soulaïmani, Azzeddine et Antoine, Xavier.
2009.
« A performance study of plane wave finite element methods with Padé-type artificial boundary condition in acoustic scattering ».
Advances in Engineering Software, vol. 40, nº 8.
pp. 738-750.
Kedjar, Bachir et Al Haddad, Kamal.
2009.
« DSP-based implementation of an LQR with integral action for a three-phase three-wire shunt active power filter ».
IEEE Transactions on Industrial Electronics, vol. 56, nº 8.
pp. 2821-2828.
Kenné, Jean-Pierre, Gharbi, Ali et Najid, Najib M..
2009.
« On the integrated production, inventory and preventive maintenance problem in manufacturing systems with backorder ».
International Journal of Simulation and Process Modelling, vol. 5, nº 4.
pp. 300-312.
Khadkikar, Vinod et Chandra, Ambrish.
2009.
« A novel structure for three-phase four-wire distribution system utilizing unified power quality conditioner (UPQC) ».
IEEE Transactions on Industry Applications, vol. 45, nº 5.
pp. 1897-1902.
Khadkikar, Vinod, Chandra, Ambrish et Singh, Bhim N..
janvier 2009.
« Generalised single-phase p-q theory for active power filtering : simulation and DSP-based experimental investigation ».
IET Power Electronics, vol. 2, nº 1.
pp. 67-78.
Khalili, Malika, Brissette, François et Leconte, Robert.
2009.
« Stochastic multi-site generation of daily weather data ».
Stochastic Environmental Research and Risk Assessment, vol. 23, nº 6.
pp. 837-849.
Khayati, Karim, Bigras, Pascal et Dessaint, Louis-A..
2009.
« LuGre model-based friction compensation and positioning control for a pneumatic actuator using multi-objective output-feedback control via LMI optimization ».
Mechatronics, vol. 19, nº 4.
pp. 535-547.
Khettabi, Riad et Songmene, Victor.
2009.
« Particle emission during orthogonal and oblique cutting ».
International Journal of Advances in Machining and Forming Operations, vol. 1, nº 1.
pp. 1-10.
Kiss, Marc-Olivier, Hagemeister, Nicola, Levasseur, Annie, Fernandes, Julio, Lussier, Bertrand et Petit, Yvan.
2009.
« A low-cost thermoelectrically cooled tissue clamp for in vitro cyclic loading and load-to-failure testing of muscles and tendons ».
Medical Engineering and Physics, vol. 31, nº 9.
pp. 1182-1186.
Ko, Albert Hung-Ren, Cavalin, Paulo Rodrigo, Sabourin, Robert et Britto, Alceu de Souza.
2009.
« Leave-one-out-training and leave-one-out-testing hidden markov models for a handwritten numeral recognizer : the implications of a single classifier and multiple classifications ».
IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 31, nº 12.
pp. 2168-2178.
Ko, Albert Hung-Ren, Sabourin, Robert et Britto, Alceu De Souza.
2009.
« Compound diversity functions for ensemble selection ».
International Journal of Pattern Recognition and Artificial Intelligence, vol. 23, nº 4.
pp. 659-686.
Ko, Albert Hung-Ren, Sabourin, Robert et Britto, Alceu de Souza.
2009.
« Ensemble of HMM classifiers based on the clustering validity index for a handwritten numeral recognizer ».
Pattern Analysis and Applications, vol. 12, nº 1.
pp. 21-35.
Kubicki, M., Niznikiewicz, M., Connor, E., Ungar, L., Nestor, P. G., Bouix, S., Dreusicke, M., Kikinis, R., McCarley, R. W. et Shenton, M. E..
2009.
« Relationship between white matter integrity, attention, and memory in schizophrenia: A diffusion tensor imaging study ».
Brain Imaging and Behavior, vol. 3, nº 2.
pp. 191-201.
Labbé, David R., de Guise, Jacques A., Godbout, Véronique, Grimard, Guy et Hagemeister, Nicola.
2009.
« Computer assisted evaluation of the pivot shift phenomenon for post-operative assessment of anterior cruciate ligament reconstruction ».
[Résumé d'une communication à une conférence]. International Journal of Computer Assisted Radiology and Surgery, vol. 4, nº suppl. 1.
S105.
Laghzale, Nor Eddine et Bouzid, Hakim.
2009.
« Analytical modeling of hydraulically expanded tube-to-tubesheet joints ».
Journal of Pressure Vessel Technology, vol. 131, nº 1.
Laghzale, Nor Eddine et Bouzid, Hakim.
2009.
« Theoretical analysis of hydraulically expanded tube-to-tubesheet joints with linear strain hardening material behavior ».
Journal of Pressure Vessel Technology, vol. 131, nº 6.
Lalonde, Sébastien et Guilbault, Raynald.
2009.
« Finite separation method : an efficient boundary element crack modeling technique ».
Computational Mechanics, vol. 44, nº 6.
pp. 791-807.
Lamarche, Louis.
2009.
« A fast algorithm for the hourly simulations of ground-source heat pumps using arbitrary response factors ».
Renewable Energy, vol. 34, nº 10.
pp. 2252-2258.
Lamarre, Marie-Eve, Parent, Stefan, Labelle, Hubert, Aubin, Carl-Éric, Joncas, Julie, Cabral, Anne et Petit, Yvan.
2009.
« Assessment of spinal flexibility in adolescent idiopathic scoliosis: suspension versus side-bending radiography ».
Spine, vol. 34, nº 6.
pp. 591-597.
Langar, Rami, Bouabdallah, Nizar et Boutaba, Raouf.
2009.
« Mobility-aware clustering algorithms with interference constraints in wireless mesh networks ».
Computer Networks, vol. 53, nº 1.
pp. 25-44.
Langar, Rami, Bouabdallah, Nizar, Boutaba, Raouf et Sericola, Bruno.
2009.
« Proposal and analysis of adaptive mobility management in IP-based mobile networks ».
IEEE Transactions on Wireless Communications, vol. 8, nº 7.
pp. 3608-3619.
Laporte, Catherine, Clark, James J. et Arbel, Tal.
2009.
« Generalized poisson 3-D scatterer distributions ».
IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 56, nº 2.
pp. 410-414.
Laporte, Claude Y., April, Alain et Bencherif, K..
2009.
« L'assurance qualité logicielle enseignée aux futurs ingénieurs en logiciel ».
Génie Logiciel, nº 91.
pp. 46-55.
Larbi, R., Baptiste, P. et Penz, B..
2009.
« Graph-based model algorithms for some cross-docking problems ».
Journal of Operations and Logistics, vol. 2, nº 4.
IV-1-IV-10.
Lavoie, Philippe, Kenné, Jean-Pierre et Gharbi, Ali.
2009.
« Optimization of production control policies in failure-prone homogenous transfer lines ».
IIE Transactions, vol. 41, nº 3.
pp. 209-222.
Lavoie, Philippe, Li, Di et Landry, René Jr.
2009.
« Inertial navigation system developed for MEMS applications ».
Gyroscopy and Navigation = Giroskopiya i Navigatsiya, nº 1.
pp. 75-85.
Leconte, Robert, Daly, S., Gauthier, Yves, Yankielun, N., Bérubé, Francis et Bernier, Monique.
2009.
« A controlled experiment to retrieve freshwater ice characteristics from an FM-CW radar system ».
Cold Regions Science and Technology, vol. 55, nº 2.
pp. 212-220.
Lee, K., Yoshida, T., Kubicki, M., Bouix, S., Westin, C. F., Kindlmann, G., Niznikiewicz, M., Cohen, A., McCarley, R. W. et Shenton, M. E..
2009.
« Increased diffusivity in superior temporal gyrus in patients with schizophrenia: A Diffusion Tensor Imaging study ».
Schizophrenia Research, vol. 108, nº 1-3.
pp. 33-40.
Lemaire, R., Faccinetto, A., Therssen, E., Ziskind, M., Focsa, C. et Desgroux, P..
2009.
« Experimental comparison of soot formation in turbulent flames of Diesel and surrogate Diesel fuels ».
[Article de conférence]. Proceedings of the Combustion Institute, vol. 32, nº 1.
pp. 737-744.
Lemaire, R., Maugendre, M., Schuller, T., Therssen, E. et Yon, J..
2009.
« Original use of a direct injection high efficiency nebulizer for the standardization of liquid fuels spray flames ».
Review of Scientific Instruments, vol. 80, nº 10.
Lenoir, Laurent, Kamwa, Innocent et Dessaint, Louis-A..
2009.
« Overload Alleviation With Preventive-Corrective Static Security Using Fuzzy Logic ».
IEEE Transactions on Power Systems, vol. 24, nº 1.
pp. 134-145.
Levitt, J. J., Styner, M., Niethammer, M., Bouix, S., Koo, M. S., Voglmaier, M. M., Dickey, C. C., Niznikiewicz, M. A., Kikinis, R., McCarley, R. W. et Shenton, M. E..
2009.
« Shape abnormalities of caudate nucleus in schizotypal personality disorder ».
Schizophrenia Research, vol. 110, nº 1-3.
pp. 127-139.
Lima, V., Talhi, C., Mouheb, D., Debbabi, M., Wang, L. et Pourzandi, Makan.
2009.
« Formal verification and validation of UML 2.0 sequence diagrams using source and destination of messages ».
Electronic Notes in Theoretical Computer Science, vol. 254.
pp. 143-160.
Liu, Ana Wansul et Melhado, Silvio B..
2009.
« O papel do briefing na gestão de projetos de edifícios de escritórios ».
Gestão & Tecnologia de Projetos, vol. 4, nº 1.
pp. 3-30.
Liu, C., Chen, D. L., Bhole, S., Cao, X. et Jahazi, M..
2009.
« Polishing-assisted galvanic corrosion in the dissimilar friction stir welded joint of AZ31 magnesium alloy to 2024 aluminum alloy ».
Materials Characterization, vol. 60, nº 5.
pp. 370-376.
Lussier, B., Clément, J., Jaafar, E., Petit, Y. et Hagemeister, N..
2009.
« Validation of an experimental device simulating the stance phase of a canine hindlimb at trot in the cranial cruciate deficient stifle: an in vitro kinematics study ».
[Résumé d'une communication à une conférence]. Osteoarthritis and Cartilage, vol. 17, nº suppl. 1.
S57.
Lussier, B., Clément, J., Jaafar, E., Petit, Y. et Hagemeister, N..
2009.
« Validation of an experimental device simulating the stance phase of a canine hindlimb at trot: an in vitro kinematics study ».
[Article de conférence]. Osteoarthritis and Cartilage, vol. 17, nº Suppl. 1.
S60-S61.
Mabrouki, Farid, Thomas, Marc, Genest, M. et Fahr, A..
2009.
« Frictional heating model for efficient use of vibrothermography ».
NDT and E International, vol. 42, nº 5.
pp. 345-352.
Machado, Alexis, Lesage, Frédéric, Lina, Jean-Marc et Grova, Christophe.
2009.
« Detection of hemodynamic responses to epileptic activity using EEG/NIRS simultaneous acquisitions ».
[Résumé d'une communication à une conférence]. Epilepsia, vol. 50, nº s11.
pp. 446-447.
Mamish, Safeya et Cheriet, Mohamed.
2009.
« Correcting arabic OCR errors using improved topic-based language models ».
International Journal of Computer Processing of Languages, vol. 22, nº 4.
pp. 321-340.
Maref, W., Elmahdy, H., Swinton, M. C. et Tariku, F..
2009.
« Assessment of energy rating of polyurethane spray foam walls: procedure and interim results ».
Journal of ASTM International, vol. 6, nº 9.
pp. 1-12.
Matteau-Pelletier, Carl, Dehaes, Mathieu, Lesage, Frédéric et Lina, Jean-Marc.
2009.
« 1/f noise in diffuse optical imaging and wavelet-based response estimation ».
IEEE Transactions on Medical Imaging, vol. 28, nº 3.
pp. 415-422.
McGuffin, Michael John et Jurisica, Igor.
2009.
« Interaction techniques for selecting and manipulating subgraphs in network visualizations ».
IEEE Transactions on Visualization and Computer Graphics, vol. 15, nº 6.
pp. 937-944.
Melancon, C., Saad, Maarouf et Zhu, W. H..
2009.
« Feedback linearization control of mobile robots with obstacle avoidance ».
Transactions on Systems, Signals and Devices, vol. 4, nº 1.
41 - 53.
Melhem, K., Saad, Maarouf, Wang, W. et Abou, S.C..
2009.
« Stability analysis and tracking control of holonomic mechanical systems : a constructive approach ».
International Journal of Modelling, Identification and Control, vol. 6, nº 1.
pp. 10-25.
Menaa, M., Meguid, M. A. et Assaf, Gabriel J..
2009.
« On the effects of subgrade erosion on the contact pressure distribution under rigid surface structures ».
Journal of Geotechnical and Geoenvironmental Engineering, vol. 135, nº 10.
pp. 1538-1542.
Ménard, Michael et Kirk, Andrew G..
2009.
« Design of Fabry-Perot filters in planar waveguides with deep-etched features for spatial switching ».
Optics Express, vol. 17, nº 20.
pp. 17614-17629.
Minville, Marie, Brissette, François, Krau, Stéphane et Leconte, Robert.
2009.
« Adaptation to climate change in the management of a Canadian water-resources system exploited for hydropower ».
Water Resources Management, vol. 23, nº 14.
pp. 2965-2986.
Miranda, Eduardo, Bourque, Pierre et Abran, Alain.
2009.
« Sizing user stories using paired comparisons ».
Information and Software Technology, vol. 51, nº 9.
pp. 1327-1337.
Mnif, Kais et Kadoch, Michel.
2009.
« Performance enhancement of routing protocols in mobile ad hoc networks ».
International Journal of Mobile Computing and Multimedia Communications, vol. 1, nº 3.
pp. 27-39.
Moghaddam, Reza Farrahi et Cheriet, Mohamed.
2009.
« Low quality document image modeling and enhancement ».
International Journal on Document Analysis and Recognition, vol. 11, nº 4.
pp. 183-201.
Moghaddam, Reza Farrahi et Cheriet, Mohamed.
2009.
« RSLDI : restoration of single-sided low-quality document images ».
Pattern Recognition, vol. 42, nº 12.
pp. 3355-3364.
Monfet, Danielle, Charneux, Roland, Zmeureanu, Radu et Lemire, Nicolas.
2009.
« Calibration of a building energy model using measured data ».
[Article de conférence]. ASHRAE Transactions, vol. 115, nº 1.
pp. 348-359.
Moraes, Raul P., Valera, Ticiane S., Demarquette, Nicole R., Oliveira, Pedro C., da Silva, Maria Lúcia C. P. et Santos, Amilton M..
2009.
« Influence of granulometry and organic treatment of a Brazilian montmorillonite on the properties of poly(styrene-co-n-butyl acrylate)/layered silicate nanocomposites prepared by miniemulsion polymerization ».
Journal of Applied Polymer Science, vol. 112, nº 4.
pp. 1949-1958.
Motamedi, Ali et Hammad, Amin.
2009.
« Lifecycle management of facilities components using radio frequency identification and building information model ».
Journal of Information Technology in Construction, vol. 14.
pp. 238-262.
Nabki, Frederic, Allidina, Karim, Ahmad, Faisal, Cicek, Paul-Vahe et El-Gamal, Mourad N..
2009.
« A highly integrated 1.8 ghz frequency synthesizer based on a MEMS resonator ».
IEEE Journal of Solid-State Circuits, vol. 44, nº 8.
pp. 2154-2168.
Nguyen, C. Thang, Vu-Khanh, Toan, Dolez, Patricia et Lara, Jaime.
2009.
« Puncture of elastomer membranes by medical needles. Part I: Mechanisms ».
International Journal of Fracture, vol. 155, nº 1.
pp. 75-81.
Nguyen, C. Thang, Vu-Khanh, Toan, Dolez, Patricia et Lara, Jaime.
2009.
« Puncture of elastomer membranes by medical needles. Part II: Mechanics ».
International Journal of Fracture, vol. 155, nº 1.
pp. 83-91.
Nichols, Jacqueline, Ahmadi, Ali, Hoorfar, Mina, Najjaran, Homayoun et Holzman, Jonathan F..
2009.
« In situ digital microfluidic conductance sampling ».
Sensors and Actuators, A: Physical, vol. 152, nº 1.
pp. 13-20.
Nikiema, J., Rivard, F. et Heitz, M..
2009.
« Lignin oxidation to generate vanillin: An integrated learning project for chemical engineering students ».
Education for Chemical Engineers, vol. 4, nº 4.
pp. 68-73.
Nikiema, Josiane, Girard, Matthieu, Brzezinski, Ryszard et Heitz, Michèle.
2009.
« Biofiltration of methane using an inorganic filter bed: Influence of inlet load and nitrogen concentration ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 36, nº 12.
pp. 1903-1910.
Nikiema, Josiane et Heitz, Michèle.
2009.
« The influence of the gas flow rate during methane biofiltration on an inorganic packing material ».
Canadian Journal of Chemical Engineering, vol. 87, nº 1.
pp. 136-142.
Nikiema, Josiane, Payre, Guy et Heitz, Michèle.
2009.
« A mathematical steady state model for methane bioelimination in a closed biofilter ».
Chemical Engineering Journal, vol. 150, nº 2-3.
pp. 418-425.
Nordez, Antoine, Jolivet, Erwan, Südhoff, Ingrid, Bonneau, Dominique, de Guise, Jacques A. et Skalli, Wafa.
2009.
« Comparison of methods to assess quadriceps muscle volume using magnetic resonance imaging ».
Journal of Magnetic Resonance Imaging, vol. 30, nº 5.
pp. 1116-1123.
Oh, J. S., Kubicki, M., Rosenberger, G., Bouix, S., Levitt, J. J., McCarley, R. W., Westin, C. F. et Shenton, M. E..
2009.
« Thalamo-frontal white matter alterations in chronic schizophrenia: A quantitative diffusion tractography study ».
Human Brain Mapping, vol. 30, nº 11.
pp. 3812-3825.
O'Leary, Paul et Harker, Matthew.
2009.
« Discrete polynomial moments for real-time geometric surface inspection ».
Journal of Electronic Imaging, vol. 18, nº 1.
Oliveira, Luciana Alves de et Melhado, Silvio Burratino.
2009.
« Projeto de fachadas leves: especificações de desempenho ».
Pós. Revista Do Programa De Pós-Graduação Em Arquitetura E Urbanismo Da FAUUSP, vol. 16, nº 25.
pp. 272-290.
Ouhimmou, Mustapha, D'Amours, Sophie, Beauregard, Robert, Ait-Kadi, Daoud et Chauhan, Satyaveer Singh.
2009.
« Optimization helps Shermag gain competitive edge ».
Interfaces, vol. 39, nº 4.
pp. 329-345.
Ouimette, Pascale et Seers, Patrice.
2009.
« NOx emission characteristics of partially premixed laminar flames of H2/CO/CO2 mixtures ».
International Journal of Hydrogen Energy, vol. 34, nº 23.
pp. 9603-9610.
Ouimette, Pascale et Seers, Patrice.
2009.
« Numerical comparison of premixed laminar flame velocity of methane and wood syngas ».
Fuel, vol. 88, nº 3.
pp. 528-533.
Paradis, A., Terriault, Patrick et Brailovski, Vladimir.
2009.
« Modeling of residual strain accumulation of NiTi shape memory alloys under uniaxial cyclic loading ».
Computational Materials Science, vol. 47, nº 2.
pp. 373-383.
Pellerin, R. et Gharbi, Ali.
2009.
« Production control of hybrid repair and remanufacturing systems under general conditions ».
Journal of Quality in Maintenance Engineering, vol. 15, nº 4.
pp. 383-396.
Pérez, M. A., Nuño, Natalia, Madrala, A., Garcia-Aznar, J. M. et Doblaré, M..
2009.
« Computational modelling of bone cement polymerization : temperature and residual stresses ».
Computers in Biology and Medicine, vol. 39, nº 9.
pp. 751-759.
Petrillo, Fabio, Pimenta, Marcelo, Trindade, Francisco et Dietrich, Carlos.
2009.
« What went wrong? A survey of problems in game development ».
Computers in Entertainment, vol. 7, nº 1.
Pham Van Bang, Damien, Sergent, Philippe, Hissel, François, Debaillon, Pierre, Montreuil, Stéphane, Long, Bernard et Ouahsine, Abdellatif.
2009.
« Vagues et érosion des sédiments générées par le passage des bateaux de navigation intérieure : mesures in situ et analyses ».
Revue Technique Maritimes & Fluviale, nº 2.
pp. 18-24.
Popov, Andrei Vladimir, Botez, Ruxandra, Mamou, Mahmoud et Grigorie, Teodor Lucian.
2009.
« Variations in optical sensor pressure measurements due to temperature in wind-tunnel testing ».
Journal of Aircraft, vol. 46, nº 4.
pp. 1314-1318.
Radtke, Paulo V. W., Wong, Tony et Sabourin, Robert.
2009.
« Solution over-fit control in evolutionary multiobjective optimization of pattern classification systems ».
International Journal of Pattern Recognition and Artificial Intelligence, vol. 23, nº 6.
pp. 1107-1127.
Rahmani, Salem, Hamadi, Abdelhamid, Mendalek, Nassar et Al Haddad, Kamal.
2009.
« A new control technique for three-phase shunt hybrid power filter ».
IEEE Transactions on Industrial Electronics, vol. 56, nº 8.
pp. 2904-2915.
Rathi, Yogesh, Michailovich, Oleg, Shenton, Martha E. et Bouix, Sylvain.
2009.
« Directional functions for orientation distribution estimation ».
Medical Image Analysis, vol. 13, nº 3.
pp. 432-444.
Razzari, L., Su, F. H., Sharma, G., Blanchard, F., Ayesheshim, A., Bandulet, H. C., Morandotti, R., Kieffer, J. C., Ozaki, T., Reid, M. et Hegmann, F. A..
2009.
« Nonlinear ultrafast modulation of the optical absorption of intense few-cycle terahertz pulses in n-doped semiconductors ».
Physical Review B, vol. 79, nº 19.
p. 193204.
Rhéaume, François-Étienne, Champliaud, Henri et Liu, Zhaoheng.
2009.
« Understanding and modelling the torsional stiffness of harmonic drives through finite-element method ».
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, vol. 223, nº 2.
pp. 515-524.
Rong, Bo, Kadoch, Michel et Guizani, Mohsen.
2009.
« Multipath routing for multiple description video communications over wireless mesh networks ».
IEEE Wireless Communications, vol. 16, nº 4.
pp. 24-30.
Rong, Bo, Qian, Yi, Guiagoussou, Mahamat H. et Kadoch, Michel.
2009.
« Improving delay and jitter performance in wireless mesh networks for mobile IPTV services ».
IEEE Transactions on Broadcasting, vol. 55, nº 3.
pp. 642-651.
Rong, Bo, Qian, Yi, Lu, Kejie, Hu, Rose Qingyang et Kadoch, Michel.
2009.
« Mobile-agent-based handoff in wireless mesh networks : architecture and call admission control ».
IEEE Transactions on Vehicular Technology, vol. 58, nº 8.
pp. 4565-4575.
Sahmoudi, Mohamed et Landry, René Jr.
2009.
« A nonlinear filtering approach for robust multi-GNSS RTK positioning in presence of multipath and ionospheric delays ».
IEEE Journal of Selected Topics in Signal Processing, vol. 3, nº 5.
pp. 764-776.
Salih-Alj, Y., Despins, Charles et Affès, Sofiène.
2009.
« A fast acquisition system for ultra-wideband wireless multiple-access communications ».
Canadian Journal of Electrical and Computer Engineering = Revue Canadienne de Génie Électrique et Informatique, vol. 34, nº 1-2.
pp. 43-48.
Scalzo, O., Turenne, S., Gauthier, M. et Brailovski, Vladimir.
2009.
« Mechanical and microstructural characterization of porous NiTi shape memory alloys ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 40A, nº 9.
pp. 2061-2070.
Schonwiesner, Marc, Voix, Jérémie et Pango, Philippe.
2009.
« Digital earplug for brain plasticity research ».
[Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 37, nº 3.
pp. 94-95.
Seddik, Hassan, Sayadi, Mounir, Fnaiech, Farhat et Cheriet, Mohamed.
2009.
« Image watermarking based on the hessenberg transform ».
International Journal of Image and Graphics, vol. 9, nº 3.
pp. 411-433.
Senoner, J. M., Sanjosé, M., Lederlin, T., Jaegle, F., García, M., Riber, E., Cuenot, B., Gicquel, L., Pitsch, H. et Poinsot, T..
2009.
« Eulerian and Lagrangian Large-Eddy Simulations of an evaporating two-phase flow ».
Comptes Rendus Mécanique, vol. 337, nº 6.
pp. 458-468.
Silla, C. N., Koerich, A. L. et Kaestner, C. A. A..
2009.
« A feature selection approach for automatic music genre classification ».
International Journal of Semantic Computing, vol. 3, nº 2.
pp. 183-208.
Simoneau, R., Thibault, D. et Fihey, Jean-Luc.
2009.
« A comparison of residual stress in hammer-peened, multi-pass steel welds-A514 (S690Q) and S41500 ».
Welding in the World, vol. 53, nº 5-6.
R124-R134.
Singh, Bhim N., Saha, R., Chandra, Ambrish et Al Haddad, Kamal.
2009.
« Static synchronous compensators (STATCOM) : a review ».
IET Power Electronics, vol. 2, nº 4.
pp. 297-324.
Slaoui, F. H., Georges, S., Lagacé, Pierre Jean et Mohanna, Yasser M..
2009.
« New inversion method for soil parameters estimation in a horizontal n-layer structures ».
International Review of Electrical Engineering, vol. 4, nº 2.
pp. 284-291.
St-Martin, Serge, Chatelain, Jean-François, Mayer, René et Paris, H..
2009.
« Étude du comportement dynamique d'une paroi mince en alliage léger durant une opération d'usinage haute vitesse ».
Revue d'Ingénierie Numérique Collaborative, vol. 3, nº 1.
Su, F. H., Blanchard, F., Sharma, G., Razzari, L., Ayesheshim, A., Cocker, T. L., Titova, L. V., Ozaki, T., Kieffer, J. C., Morandotti, R., Reid, M. et Hegmann, F. A..
2009.
« Terahertz pulse induced intervalley scattering in photoexcited GaAs ».
Optics Express, vol. 17, nº 12.
pp. 9620-9629.
Südhoff, Ingrid, de Guise, Jacques A., Nordez, Antoine, Jolivet, Erwan, Bonneau, Dominique, Khoury, V. et Skalli, Wafa.
2009.
« 3D-patient-specific geometry of the muscles involved in knee motion from selected MRI images ».
Medical and Biological Engineering and Computing, vol. 47, nº 6.
pp. 579-587.
Sun, Shuhui, Zhang, Gaixia, Zhong, Yu, Liu, Hao, Li, Ruying, Zhou, Xiaorong et Sun, Xueliang.
2009.
« Ultrathin single crystal Pt nanowires grown on N-doped carbon nanotubes ».
Chemical Communications, nº 45.
pp. 7048-7050.
Sun, Yulan, Thomas, Marc et Masounave, Jacques.
2009.
« An experimental investigation of the dielectric properties of electrorheological fluids ».
Smart Materials and Structures, vol. 18, nº 2.
Talhi, Chamseddine, Mouheb, D., Lima, V., Debbabi, Mourad, Wang, L. et Pourzandi, M..
2009.
« Usability of security specification approaches for UML design: A survey ».
Journal of Object Technology, vol. 8, nº 6.
pp. 103-122.
Thi, B. N. Vu, Vu-Khanh, Toan et Lara, Jaime.
2009.
« Mechanics and mechanism of cut resistance of protective materials ».
Theoretical and Applied Fracture Mechanics, vol. 52, nº 1.
pp. 7-13.
Thibault, Denis, Bocher, Philippe et Thomas, Marc.
2009.
« Residual stress and microstructure in welds of 13%Cr-4%Ni martensitic stainless steel ».
Journal of Materials Processing Technology, vol. 209, nº 4.
pp. 2195-2202.
Toews, M. et Arbel, T..
2009.
« Detection, localization, and sex classification of faces from arbitrary viewpoints and under occlusion ».
IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 31, nº 9.
pp. 1567-1581.
Torra, Vicenc, Isalgue, Antonio, Auguet, C., Carreras, G., Lovey, Francisco C., Soul, H. et Terriault, Patrick.
2009.
« Damping in civil engineering using SMA. The fatigue behavior and stability of CuAlBe and NiTi alloys ».
Journal of Materials Engineering and Performance, vol. 18, nº 5-6.
pp. 738-745.
Toubal, Lotfi, Bocher, Philippe et Moreau, André.
2009.
« Dwell-fatigue life dispersion of a near alpha titanium alloy ».
International Journal of Fatigue, vol. 31, nº 3.
pp. 601-605.
Touihri, Ridha, Soulaïmani, Azzeddine et Plunian, Franck.
2009.
« Stabilized finite element formulation applied to the kinematic Ponomarenko dynamo problem ».
Theoretical and Computational Fluid Dynamics, vol. 23, nº 6.
pp. 431-437.
Tremblay, Olivier et Dessaint, Louis-A..
2009.
« Experimental validation of a battery dynamic model for EV applications ».
World Electric Vehicle Journal, vol. 3, nº 2.
pp. 289-298.
Turcot, Katia, Aissaoui, Rachid, Boivin, Karine, Pelletier, M., Hagemeister, Nicola et de Guise, Jacques A..
2009.
« The responsiveness of three-dimensional knee accelerations used as an estimation of knee instability and loading transmission during gait in osteoarthritis patient's follow-up ».
Osteoarthritis and Cartilage, vol. 17, nº 2.
pp. 213-219.
Uta, E., Gey, N., Bocher, Philippe, Humbert, M. et Gilgert, J..
2009.
« Texture heterogeneities in alpha(p)/alpha(s) titanium forging analysed by EBSD-Relation to fatigue crack propagation ».
Journal of Microscopy, vol. 233, nº 3.
pp. 451-459.
Vachon, Pierre-Luc, Brailovski, Vladimir et Terriault, Patrick.
2009.
« Modeling of delamination initiation and propagation in composite laminates under monotonic tensile loading using the progressive damage modeling technique ».
Science and Engineering of Composite Materials, vol. 16, nº 2.
pp. 99-114.
Vázquez, Carlos, Ghazal, Mohammed et Amer, Aishy.
2009.
« Feature-based detection and correction of occlusions and split of video objects ».
Signal, Image and Video Processing, vol. 3, nº 1.
pp. 13-25.
Venne, Frédérick, Rivest, Louis et Desrochers, Alain.
2009.
« Capture des notes, dimensions et tolérances au sein de la maquette numérique 3D aéronautique ».
Revue d'Ingénierie Numérique Collaborative, vol. 3, nº 1.
Voix, Jérémie et Hager, L. D..
2009.
« Individual fit testing of hearing protection devices ».
Journal of occupational safety and ergonomics, vol. 15, nº 2.
pp. 211-219.
Voix, Jéremie et Laville, Frédéric.
2009.
« Prediction of the attenuation of a filtered custom earplug ».
Applied Acoustics, vol. 70, nº 7.
pp. 935-944.
Voix, Jérémie et Laville, Frédéric.
2009.
« The objective measurement of individual earplug field performance ».
Journal of the Acoustical Society of America, vol. 125, nº 6.
pp. 3722-3732.
Vu-Khanh, Toan et El Majdoubi, M..
2009.
« Entropy change with yielding and fracture of polypropylene ».
Theoretical and Applied Fracture Mechanics, vol. 51, nº 2.
pp. 111-116.
Wagnac, Éric, Arnoux, P. J. et Aubin, C. E..
2009.
« Determination of the hyperelastic material properties of the intervertebral disk under dynamic compressive loads ».
Computer methods in biomechanics and biomedical engineering, vol. 12, nº suppl. 1.
pp. 253-254.
Wanjara, P. et Jahazi, M..
2009.
« Application of shear punch testing to study microstructure-property relationships in electron beam welded 17-4 PH stainless steel ».
Canadian Metallurgical Quarterly, vol. 48, nº 3.
pp. 317-326.
Woodward, Lyne, Perrier, Michel et Srinivasan, Bala.
2009.
« Improved performance in the multi-unit optimization method with non-identical units ».
Journal of Process Control, vol. 19, nº 2.
pp. 205-215.
Woodward, Lyne, Perrier, Michel, Srinivasan, Bala et Tartakovsky, Boris.
2009.
« Maximizing power production in a stack of microbial fuel cells using multiunit optimization method ».
Biotechnology Progress, vol. 25, nº 3.
pp. 676-682.
Yang, Lijun, Zmeureanu, Radu et Rivard, Hugues.
2009.
« Use of decision models under uncertainty for the estimation of the environmental impacts of a hot-water boiler ».
Journal of Energy Engineering, vol. 135, nº 2.
pp. 27-32.
Yee, Márcio, Souza, Adriana M. C., Valera, Ticiane S. et Demarquette, Nicole R..
2009.
« Stress relaxation behavior of PMMA/PS polymer blends ».
Rheologica Acta, vol. 48, nº 5.
pp. 527-541.
Yoshida, T., McCarley, R. W., Nakamura, M., Lee, K., Koo, M. S., Bouix, S., Salisbury, D. F., Morra, L., Shenton, M. E. et Niznikiewicz, M. A..
2009.
« A prospective longitudinal volumetric MRI study of superior temporal gyrus gray matter and amygdala-hippocampal complex in chronic schizophrenia ».
Schizophrenia Research, vol. 113, nº 1.
pp. 84-94.
Zaghbani, Imed et Songmene, Victor.
2009.
« A force-temperature model including a constitutive law for Dry High Speed Milling of aluminium alloys ».
Journal of Materials Processing Technology, vol. 209, nº 5.
pp. 2532-2544.
Zaghbani, Imed et Songmene, Victor.
2009.
« Estimation of machine-tool dynamic parameters during machining operation through operational modal analysis ».
International Journal of Machine Tools and Manufacture, vol. 49, nº 12-13.
pp. 947-957.
Zaghbani, Imed, Songmene, Victor et Khettabi, Riad.
2009.
« Fine and ultrafine particle characterization and modeling in high-speed milling of 6061-T6 aluminum alloy ».
Journal of Materials Engineering and Performance, vol. 18, nº 1.
pp. 38-48.
Zednik, Ricardo J. et Joseph, Ron.
2009.
« Evaluating over-aged powder coatings ».
Metal Finishing, vol. 107, nº 10.
pp. 40-44.
Zednik, Ricardo J. et Joseph, Ron.
2009.
« The devastating effects of solvent entrapment on coating adhesion ».
Metal Finishing, vol. 108, nº 7.
pp. 39-42.
Zhang, Jinfang, Dziong, Zbigniew, Gagnon, François et Kadoch, Michel.
2009.
« Multiuser detection based MAC design for Ad Hoc networks ».
IEEE Transactions on Wireless Communications, vol. 8, nº 4.
pp. 1836-1846.
Zhani, M. F., Elbiaze, H. et Kamoun, F..
2009.
« Analysis and Prediction of Real Network Traffic ».
Journal of Networks, vol. 4, nº 9.
pp. 855-865.
Zouidi, A., Rahmani, S., Fnaiech, F. et Al-Haddad, K..
2009.
« Intelligent control of active power filters using adaptive linear neurons ».
International Review of Electrical Engineering, vol. 4, nº 3.
pp. 348-356. |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau