Document quand le type de document est "Compte rendu de conférence" et l'année est 1993

Coallier, François et Keller, Rudolph et Müller, Hausi A. et Forte, Gene et Madhavji, Nazim H. et Prebble, R., éds. 1993. « CASE'92 Report : results from the fifth international workshop on ; Montreal, Quebec, Canada, July 6-10, 1992 ». In CASE'93: Proceeding of the Sixth International Workshop on Computer-Aided Software Engineering, 1993 pp. 378-419. IEEE Computer Society Press.

Abran, Alain et Robillard, Pierre N.. 1993. « Reliability of function points productivity model for enhancement projects (A field study) ». In Conference on Software Maintenance ,1993. CSM-93, Proceedings (Montreal, QC, Canada, Sept. 27-30, 1993) pp. 80-87.
Compte des citations dans Scopus : 6.

Akhrif, Ouassima et Saydy, Lahcen. 1993. « Adaptive nonlinear control of a chemical batch reactor ». In IEEE International Conference on Control Applications (Vancouver, Canada, Sept. 13-16, 1993) pp. 909-911. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Al Haddad, Kamal et Girard, A.. 1993. « Influence of the interconnection of photovoltaic energy on electric power distribution ». In Energy efficiency and solar energy : proceedings, 19th Annual Conference of the Solar Energy Society of Canada, July 9-13, 1993, Quebec = Efficacité énergétique et énergie solaire: actes du congrès, 19e Congres Annuel de la Sociéte d'Énergie Solaire (Quebec, QC, Canada, July 09-13, 1993) A10-A14. Ottawa, Canada : Solar Energy Society of Canada.

Al Haddad, Kamal et Girard, André. 1993. « Influence de l'interconnexion de l'énergie photovoltaique sur le réseau électrique ». In Annual Conference of the Solar Energy Society of Canada (Québec, QC, Canada, 9-13 juil. 1993) A10-A14. Ottawa, Canada : Solar Energy Society of Canada.

Amor, L. B., Dessaint, Louis A, Akhrif, Ouassima et Olivier, Guy. 1993. « Adaptive input-output linearization of a switched reluctance motor for torque control ». In International Conference on Industrial Electronics, Control, and Instrumentationof (IECON) (Maui, HI, USA, Nov. 15-19, 1993) pp. 2155-2160. New York, NY, USA : Institute of Electrical and Electronics Engineers.

Arteau, Jean et Giguère, Denis. 1993. « Efficacité, fiabilité et confort comme critères d'évaluations des équipements de protection individuelle ». In Maîtriser le Risque au Poste de Travail : Actes du IVe Colloque International du Comité Recherches de l'Association Internationale de la Sécurité Sociale (AISS) (Strasbourg, France, 22-23 oct. 1992) Coll. « INRS Actes plus » pp. 339-344. Presses universitaires de Nancy.

Arteau, Jean et Lan, André. 1993. « Les câbles de secours horizontaux analysés sous l'angle de l'efficacité, de la fiabilité et du confort ». In Maîtriser le Risque au Poste de Travail : Actes du IVe Colloque International du Comité Recherches de l'Association Internationale de la Sécurité Sociale (AISS) (Strasbourg, France, 22-23 oct. 1992) Coll. « INRS Actes plus » pp. 345-347. Presses universitaires de Nancy.

Asber, D., Boukas, E. K. et Saad, M.. 1993. « Control algorithm for uncertain discrete-time linear systems using concept of Ω-invariant ». In Proceedings of Canadian Conference on Electrical and Computer Engineering (Vancouver, BC, Canada, Sept. 14-17, 1993) pp. 115-118. Institute of Electrical and Electronics Engineers Inc..

Badger, M., Julien, A., LeBlanc, A. D., Moustapha, S. H., Prabhu, A. et Smailys, A. A.. 1993. « The PT6 engine: 30 years of gas turbine technology evolution ». In ASME 1993 International Gas Turbine and Aeroengine Congress and Exposition, GT 1993 (Cincinnati, OH, USA, May 24-27, 1993) ASME.
Compte des citations dans Scopus : 3.

Beauchamp, Yves, Ngô, Anh Dung, Yengue, G. et Trudel, C.. 1993. « Les problèmes de sécurité associés à l'utilisation des presses à injecter les plastiques ». In 15e congrès de l'AHIQ (Montréal, QC, Canada, mai 1993) pp. 26-33.

Beauchamp, Yves, Thomas, Marc et Stobbe, T.. 1993. « Some ergonomic design criteria for man-robot systems based on experimental studies ». In CAD/CAM, robotics, and autonomous factories : proceedings of INCARF-93, Indian Institute of Technology, New Delhi, India, December 16-19, 1993 (New Delhi, India, Dec. 16-19, 1993) pp. 703-714. New York, USA : Tata McGraw Hill.

Beaulieu, A., Ait-Kadi, D. et Gharbi, Ali. 1993. « Heuristic for flexible machine selection problems ». In International conference on industrial engineering and production management (Mons, Belgium, June 2-4, 1993) pp. 98-108.
Compte des citations dans Scopus : 2.

Bédard, Claude. 1993. « Computer assistance to integration in building design ». In Advances in computer-assisted building design systems : (focus symposium, August 3-4) : preconference proceedings, 4th International Symposium on Systems Research, Informatics and Cybernetics (August 2-5, 1993, Baden-Baden, Germany) (Baden-Baden, Germany, August 2-5, 1993) pp. 165-176.

Belzile, Jean et Haccoun, David. 1993. « A marcovian evaluation of the frame error probability for the M algorithm ». In Proceedings : 1993 IEEE International Symposium on Information Theory (San Antonio, TX, USA, Jan. 17-22, 1993) p. 267.

Belzile, Jean, Haccoun, David et Forest, Serge. 1993. « Bidirectional decoding of convolutional codes over rayleigh fading channels ». In Proceedings : 1993 IEEE International Symposium on Information Theory (San Antonio, TX, USA, Jan. 17-22, 1993) p. 108.
Compte des citations dans Scopus : 1.

Ben Amor, L., Akhrif, Ouassima, Dessaint, Louis A et Olivier, Guy. 1993. « Adaptive nonlinear torque control of a switched reluctance motor ». In Proceedings of the 1993 American Control Conference (San Francisco, CA, USA, June 2-4, 1993) pp. 2831-2836. Evanston, IL, USA : American Automatic Control Council.

Ben Amor, L., Dessaint, Louis-A., Akhrif, Ouassima et Olivier, G.. 1993. « Adaptive nonlinear torque control of a switched reluctance motor via flux observation ». In Computational aspects of electromechanical energy converters and drives, 7-8-9 July 1993 : proceedings [of the the] 4th international conference = La modelisation en simulation des machines electriques et des convertisseurs statiques, 7-8-9 Juillet 1993 : (Montreal, QC, Canada, July 7-9, 1993) pp. 241-248. International Association for Mathematics and Computers in Simulation.

Ben Amor, Lofti, Dessaint, Louis-A., Akhrif, Ouassima et Olivier, Guy. 1993. « Adaptive feedback linearization for position control of a switched reluctance motor: analysis and simulation ». In Proceedings of the 1992 International Conference on Industrial Electronics, Control, Instrumentation, and Automation. Power Electronics and Motion Control (San Diego, CA, USA, Nov. 9-13, 1992) pp. 150-159.

Bennis, Saad, Côté, S. et Lardigue, Alain. 1993. « Modèles d'évaluation quantitative et qualitative du ruissellement en milieu urbain ». In Colloque sur le Drainage Urbain, AQTE (Montréal, QC, Canada, Juin 1993) pp. 1-10. Montréal, Canada : École Polytechnique.

Bensoussan, David et Hammami, Maher. 1993. « Robustness of the generalized PAG structure to plant dynamic uncertainty ». In 16th IFIP Conference on System Modeling and Optimization (Compiègne, France, July 5-9, 1993)

Bensoussan, David et Kadoch, Michel. 1993. « Local decentralized solutions working towards global performance objectives ». In First International Thermal Energy Congress (Marrakech, Morocco, June 6-10, 1993) Agadir, Maroc : ITEC.

Blaquière, Yves, Dagenais, Michel et Savaria, Yvon. 1993. « A new accurate and hierarchical timing analysis approach ». In European Conference on Design Automation with the European Event in ASIC Design (Paris, France, Feb. 22-25, 1993) pp. 449-454. IEEE Computer Society Press.

Chaaban, A., Bouzid, A., Derenne, M. et Schaefer, W.. 1993. « Evaluation of torque coefficients and gasket stress distributions in a bolted flanged joint using different types of lubricants ». In 3ème colloque international sur l'étanchéité des assemblages statiques avec joints = 3rd International Symposium on Fluid Sealing of Static Gasketed Joints (Biarritz, France, Sept. 15-17, 1993) Coll. « Publication CEDTIM » pp. 451-462. Centre Technique des Industries Mécaniques.

Chaffaï, R., Al Haddad, Kamal, Dessaint, Louis A et El Asmar, C.. 1993. « Convertisseur haute performance commutation douce pour la conversion de l'énergie solaire ». In Canadian Conference on Electrical and Computer Engineering (Vancouver, BC, Canada, 14-17 sept. 1993) pp. 187-190. Canada : IEEE Canada.

Cheriet, Mohamed. 1993. « Reading cursive script by parts ». In IAPR Third International Workshop on Frontiers in Handwriting (Buffalo, NY, USA, May 25-27, 1993) pp. 108-110.

Cheriet, Mohamed, Nadal, C. et Suen, Ching Y.. 1993. « Visual aspect of handwriting recognition ». In 6th International Conference on Handwriting and Drawing (ICOHD) (Paris, France, July 4-7, 1993) pp. 403-408.

Crépeau, J., Thibeault, Claude et Savaria, Y.. 1993. « Some results on yield and local design rule relaxation ». In Proceedings. The IEEE International Workshop on Defect and Fault Tolerance in VLSI Systems (Venice, Italy, Oct. 27-29, 1993) pp. 144-151. Los Alamitos, CA, USA : Institute of Electrical and Electronics Engineers (IEEE).

Crevier, Daniel. 1993. « Computing statistical properties of hue distributions for color image-analysis ». In 12th Conference on Intelligent Robots and Computer Vision Xii: Algorithms and Techniques (Boston, MA, USA, Sept. 7-9, 1993) Coll. « Proceedings of SPIE », vol. 2055. pp. 613-623. USA : SPIE.
Compte des citations dans Scopus : 2.

Crevier, Daniel. 1993. « Expert-systems as design aids for artificial vision systems : a survey ». In 12th Conference on Intelligent Robots and Computer Vision Xii: Algorithms and Techniques (Boston, MA, USA, Sept. 7-9, 1993) Coll. « Proceedings of SPIE », vol. 2055. pp. 84-96. USA : SPIE.
Compte des citations dans Scopus : 4.

Crevier, Daniel. 1993. « Hue-based segmentation of color images ». In Proceedings of Canadian Conference on Electrical and Computer Engineering (Vancouver, BC, Canada, Sept. 14-17, 1993) pp. 1250-1253. New York, NY, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 4.

Crevier, Daniel et Lepage, Richard. 1993. « A visual interface for soar ». In 12th SOAR Workshop (Los Angeles, CA, USA, June 3-6, 1993) pp. 23-26.

Cuillère, J.-C., Maranzana, Roland et Gueury, M.. 1993. « Triangulation à densité contrôlée d'un modèle par les frontières exactes utilisant une méthode frontale ». In MICAD 93 : Actes de la 12ème Conférence internationale sur la CFAO, l'infographie et les technologies assistées par ordinateur, 9-12 février 1993, Parc des expositions de Paris, Porte de Versailles = Proceedings of the 12th International Conference on (Paris, France, 9-12 févr. 1993) pp. 165-183. Paris, France : Hermès.

Cyr, Jean-Marc, Al-Haddad, Kamal, Dessaint, Louis A et Saad, Maarouf. 1993. « Analyse des contraintes et dimensionnement de trois topologies de convertisseurs à résonance ». In Proceedings of Canadian Conference on Electrical and Computer Engineering (Vancouver, BC, Canada, 14-17 sept. 1993) pp. 191-194. New York, NY, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 2.

Cyr, Jean-Marc, Al-Haddad, Kamal, Dessaint, Louis A et Saad, Maarouf. 1993. « Comparative study of three resonant converter topologies ». In Proceedings of Canadian Conference on Electrical and Computer Engineering (Vancouver, BC, Canada, Sept. 14-17, 1993) pp. 195-198. New York, NY, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 1.

Dao, Thien-My, Galopin, Michel et Bastien, P.. 1993. « Optimum design of manufacturing cell system (MCS) using the cost based machine-component grouping technique ». In Proceedings of the 15th Annual Conference on Computers and Industrial Engineering (Cocoa Beach, FL, USA, Mar. 8-10, 1993) Coll. « Computers & industrial engineering », vol. 25. Oxford, UK : Pergamon.

de Guise, Jacques A., Potvin, J., Sabourin, Robert et Dansereau, Jean. 1993. « A radiographic knowledge based system for the localization of scoliotic vertebral anatomical landmarks ». In Fourth International Symposium on Computer Simulation in Biomechanics (Montlignon, Paris, June 30-July 2, 1993) 1/10-11/13.

Denault, J. et Vu-Khanh, Toan. 1993. « Interfacial strength in PEEK/carbon composite ». In Proceedings of the 1993 9th International Conference on Composite Materials : ICCM/9 : Metal Matrix Composites (Madrid, Spain, July 12-16, 1993) pp. 177-184. Woodhead Publishing Limited.
Compte des citations dans Scopus : 30.

Deneux, D., Maranzana, Roland et Soenen, R.. 1993. « Proposition d'une méthode de génération automatique de gammes de fabrication universelle basée sur l'interrogation objective d'un modèle technologique homogène ». In MICAD 93 : Actes de la 12ème Conférence internationale sur la CFAO, l'infographie et les technologies assistées par ordinateur, 9-12 février 1993, Parc des expositions de Paris, Porte de Versailles = Proceedings of the 12th International Conference on (Paris, France, 9-12 févr. 1993) pp. 101-113. Paris, France : Hermès.

Desrochers, Alain, Krouglicof, Nicholas et Croteau, D.. 1993. « Developpement d'un capteur d'efforts intégré pour le contrôle adaptatif de trajectoires robotisées ». In Compte Rendu de l'Atelier sur les Technologies de Pointe sur Les Systèmes de Base de Connaissance et la Robotique, Ministère de la Défense Nationale (Ottawa, ON, Canada, 14-17 nov. 1993)

Dessaint, Louis-A., Robert, Sylvain, Saad, Maarouf et Olivier, Guy. 1993. « A cartesian-based adaptive tracking controller for a SCARA robot ». In International Conference on Industrial Electronics, Control, and Instrumentation (Maui, HI, USA, Nov. 15-19, 1993) pp. 1517-1521. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Draganoiu, Gheorghe, Lamarche, Louis et McComber, Pierre. 1993. « Computer model of glaze accretion on wires ». In Proceedings of the 12th International Conference on Offshore Mechanical and Arctic Engineering (OMAE) (Glasgow, Scotland, June 20-24, 1993) pp. 89-95. USA : ASME.

Dziong, Zbigniew, Mignault, Josee et Rosenberg, Catherine. 1993. « Blocking evaluation for networks with reward maximization routing ». In IEEE INFOCOM '93 The Conference on Computer Communications, Proceedings (San Francisco, CA, USA, Mar. 30-Apr. 01, 1993) pp. 593-601. IEEE.
Compte des citations dans Scopus : 3.

El-Asmar, C., Al-Haddad, Kamal et Dessaint, Louis-A.. 1993. « Modeling of sub-synchronous cascade in steady state using doubly fed machine theory ». In Computational aspects of electromechanical energy converters and drives, 7-8-9 July 1993 : proceedings [of the the] 4th international conference = La modelisation en simulation des machines electriques et des convertisseurs statiques, 7-8-9 Juillet 1993 : (Montreal, Canada, July 7-9, 1993) pp. 177-181. International Association for Mathematics and Computers in Simulation.

Everett, Hazel, Robert, Jean-Marc et van Kreveld, Marc. 1993. « Optimal algorithm for computing (≤ k)-levels, with applications to separation and transversal problems ». In Proceedings of the ninth annual symposium on Computational geometry (San Diego, CA, USA, May 19-21, 1993) pp. 38-46. New York, NY, USA : ACM.

Gagnon, François. 1993. « Permutated modulation and coded modulation for interleaved slow fading channels ». In Proceedings of the 1993 IEEE International Symposium on Information Theory (San Antonio, TX, USA, Jan. 17-22, 1993) p. 344. Piscataway, NJ, United States : Institute of Electrical and Electronics Engineers (IEEE).

Gagnon, François, Batani, Naïm et Dam, Tam Q.. 1993. « Simplified implementation of a soft decision threshold decoder ». In IEEE Global Telecommunications Conference (Houston, TX, USA, Nov. 29-Dec. 2, 1993) pp. 626-630. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Gagnon, François, Bourdeau, Richard, Berrouard, Jocelyn, Batani, Naïm et Belzile, Jean. 1993. « On the validation of a simulator for a high-speed digital microwave radio ». In Canadian Conference on Electrical and Computer Engineering (Vancouver, Canada, Sept. 14-17, 1993) pp. 519-522. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Gagnon, François et Haccoun, David. 1993. « Bandwidth efficient coded diversity for slow fading channels ». In 43rd IEEE Vehicular Technology Conference (VTC) (Secaucus, NJ, USA, May 18-20, 1993) pp. 116-119. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 1.

Galopin, Michel, Dao, Thien-My et Boillot, J. P.. 1993. « Arc welding procedure optimization ». In International trends in welding science and technology : proceedings of the 3rd International Conference on Trends in Welding Research (Gatlinburg, TN, USA, June 1-5, 1992) Materials Park, OH, USA : ASM International.

Galopin, Michel, Dao, Thien-My, Hansquine, S., Aiche, M. et Zacharia, T.. 1993. « On-line development of robust welding schedules ». In Modeling and control of joining processes (Orlando, FL, USA, Dec. 8-10, 1993) pp. 255-262. Orlando, FL, United States : American Welding Society.

Gargour, Christian et Ramachandran, V.. 1993. « Design of 2-d digital-filters with non-separable transfer-functions generated from 2-d all-pass networks ». In 36th Midwest Symposium on Circuits and Systems (Detroit, MI, USA, Aug. 16-18, 1993) pp. 269-271. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Germain, P., Cummings, E. et Hornung, H.. 1993. « Transition on a sharp cone at high enthalpy : New measurements in the shock tunnel T5 at GALCIT ». In 31st Aerospace Sciences Meeting (Reno, NV, USA, Jan. 11-14, 1993) AIAA.

Gervais, Paul et Paradis, Jean. 1993. « Use of logical data flow diagram in understanding and planning project management systems ». In Smooth sailing with project management : 24th annual seminar/symposium proceedings (San Diego, CA, USA, Oct. 1-7, 1993) pp. 392-399. Drexel Hill, PA, USA : Project Management Institute.

Ghanem, Mohamed C., Al-Haddad, Kamal et Roy, Gilles. 1993. « A new single phase AC/DC buck-boost converter with unity power factor ». In Computational aspects of electromechanical energy converters and drives, 7-8-9 July 1993 : proceedings [of the the] 4th international conference = La modelisation en simulation des machines electriques et des convertisseurs statiques, 7-8-9 Juillet 1993 : (Montreal, Canada, July 7-9, 1993) pp. 367-372. International Association for Mathematics and Computers in Simulation.

Ghanem, Mohamed C., Al-Haddad, Kamal et Roy, Gilles. 1993. « A new single phase buck-boost converter with unity power factor ». In 28th Annual Meeting of the IEEE Industry Applications Conference (Toronto, Canada, Oct. 3-8, 1993) pp. 785-792. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Ghanem, Mohamed C., Al-Haddad, Kamal et Roy, Gilles. 1993. « Unity power factor scheme using cascade converters ». In International Conference on Industrial Electronics, Control and Instrumentation (Maui, HI, USA, Nov. 15-18, 1993) pp. 936-941. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 9.

Ghannouchi, F. M., Beauregard, F. et Kouki, A. B.. 1993. « Mesure de la puissance absolue micro-onde à l'aide d'une jonction six-portes à quatre diodes ». In Canadian Conference on Electrical and Computer Engineering (Vancouver, BC, Canada, Sept. 14-17, 1993) pp. 925-926. Institute of Electrical and Electronics Engineers Inc..

Ghannouchi, F. M., Kouki, A. B. et Beauregard, F.. 1993. « An automated non-linear transistor characterization system with a high-level language user-interface for easy control, visualization and data management ». In 41st ARFTG Conference Digest - Spring 1993 (Atlanta, GA, USA, June 18, 1993) pp. 18-23. Institute of Electrical and Electronics Engineers Inc..
Compte des citations dans Scopus : 1.

Ghannouchi, F. M., Kouki, A. B. et Khebir, A.. 1993. « Automatic diagnostic and localization of defective elements in phased array antennas ». In Proceedings of IEEE Antennas and Propagation Society International Symposium (Ann Arbor, MI, USA, June 28-July 02, 1993) pp. 210-213. IEEE.
Compte des citations dans Scopus : 2.

Gharbi, Ali et Villeneuve, L.. 1993. « Méthodologie de conception d'ateliers de fabrication flexible, basée sur l'intégration des modèles ». In 4ème Congrès International de Génie Industriel (Marseille, France, 15-17 déc. 1993) pp. 37-45. Marseille, France :

Gharbi, Ali et Villeneuve, L.. 1993. « Simulation: a tool to balance a bufferless multi-product assembly line ». In International Conference on Industrial Engineering and Production Management (Mons, Belgium, June 2-4, 1993) pp. 593-602.

Hassan, M., Burdet, O. et Favre, R.. 1993. « Combination of ultrasonic measurements and load tests in bridge evaluation ». In 5th International Conference on Structural Faults and Repair (Edinburgh, Scotland, UK, June 29-July 01, 1993) Engineering Technics Press.

Hassan, M., Burdet, O. et Favre, R.. 1993. « Interpretation of 200 load tests of swiss bridges ». In IABSE Colloquium: Remaining Structural Capacity (Copenhagen, Denmark, Mar. 17-19, 1993) pp. 319-326. IABSE.

Kajl, Stanislaw. 1993. « Augmentation de la rentabilité d'un système de chauffe-eau solaire ». In Energy efficiency and solar energy : 19th Annual Conference of the Solar Energy Society of Canada : proceedings : Québec '93, July 9-13, 1993 = Efficacité énergétique et énergie solaire : 19e Congrès annuel de la Société d'énergie solaire du Canada : acte (Québec, QC, Canada, 9-13 juil. 1993) M-27-31. Solar Energy Society of Canada.

Kajl, Stanislaw. 1993. « Energy recovery and increasing energy efficiency of a building ». In International Conference on Building Design, Technology, and Occupant Well-Being (Brussels, Belgium, Feb. 17-19, 1993) pp. 114-119. Atlanta, GA , USA : American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE).

Kajl, Stanislaw. 1993. « Increase in profitability of a solar water-heating system ». In Energy efficiency and solar energy : proceedings, 19th Annual Conference of the Solar Energy Society of Canada, July 9-13, 1993, Quebec = Efficacité énergétique et énergie solaire: actes du congrès, 19e Congres Annuel de la Sociéte d'Énergie Solaire (Quebec, QC, Canada, July 09-13, 1993) M27-M31. Ottawa, Canada : Solar Energy Society of Canada.

Khanduri, A. C., Bédard, Claude et Alkass, S.. 1993. « Life-cycle costing of office buildings at the preliminary design stage ». In 5th International Conference on civil and Structural Engineering Computing (CIVIL-COMP93) (Edinburgh, Scotland, Aug 17-19, 1993) pp. 1-8. Edinburgh : Civil Comp Press.

Koerich, A. L., Muller, H. J. et Sander, R.. 1993. « Dielectric constants in oxadiazol series ». In 45th Meeting of Brazilian Society for the Progress of Science (SBPC) (Recife, Brazil, July, 1993) pp. 21-29.

Koerich, A. L., Muller, H. J. et Sander, R.. 1993. « Ferroelectrical properties of pentilcarboxi-anilina ». In 45th Meeting of Brazilian Society for the Progress of Science (Recife, Brazil, July, 1993) pp. 91-98.

Kouki, A. B., Ghannouchi, F. M. et Khebir, A.. 1993. « On the experimental characterization of electromagnetic emissions from printed circuit boards ». In Proceedings of IEEE Antennas and Propagation Society International Symposium (Ann Arbor, MI, USA, June 28-July 02, 1993) pp. 1490-1493. IEEE.

Labonté, Daniel, Brûlé, Michel et Laurence, Michel. 1993. « Méthode de modification de l'échelle temps d'enregistrements audio, pour la réécoute à vitesse variable en temps réel ». In Proceedings of Canadian Conference on Electrical and Computer Engineering (CCECE) (Vancouver, BC, Canada, Sept. 14-17, 1993) pp. 277-280. Institute of Electrical and Electronics Engineers Inc..

Laville, Frédéric et Trentin, D.. 1993. « Impact noise modelling ». In Noise - 93, St. Petersburg, Russia, May 31 - June 3, 1993 : proceedings (St. Petersburg, Russia, May 31-June 3, 1993)

Lavoie, M., Qué-Do, V., Houle, J. L. et Davidson, J.. 1993. « Real time simulation of power systems stability using parallel digital signal processors ». In Computational aspects of electromechanical energy converters and drives, 7-8-9 July 1993 : proceedings [of the the] 4th international conference = La modelisation en simulation des machines electriques et des convertisseurs statiques, 7-8-9 Juillet 1993 : (Montreal, QC, Canada, July 7-9, 1993) pp. 23-28. International Association for Mathematics and Computers in Simulation.

Leconte, Robert. 1993. « Modeling the interactions between microwaves and a snow/soil system ». In Snow watch '92 : detection strategies for snow and ice : an International Workshop on Snow and Lake Ice Cover and the Climate System (Niagara on the Lake, ON, Canada pp. 169-184. Boulder, Colo, USA : Dept. of Commerce, National Oceanic and Atmospheric Administration, National Environmental Satellite, Data, and Information Service.
Compte des citations dans Scopus : 1.

Leconte, Robert. 1993. « Modelling the interactions between microwaves and a snow/soil system ». In Detection strategies for snow and ice : International workshop on snow and lake ice cover and the climate system : Papers (Niagara-on-the-Lake, ON, Canada, 1992) pp. 188-203.
Compte des citations dans Scopus : 1.

Lefebvre, D., Archambault, S., Vu-Khanh, Toan et Simard, Y.. 1993. « Compression strength of unidirectional CFRP composites ». In Second Canadian International Composites Conference and Exhibition, Ottawa, Ontario, Canada 1993 = Deuxième conférence et exposition internationale Canadienne sur les composites (Ottawa, ON, Canada, Sept. 27-29, 1993) pp. 659-666. Montréal, Québec : Canadian association for composite structures and materials.

Lefebvre, Louis et Laville, Frédéric. 1993. « Muffler design through non-dimensional four-pole modeling and direct impedance measurements ». In INTER-NOISE and NOISE-CON Congress and Conference Proceedings, InterNoise93 (Leuven, Belgium, Aug., 1993) pp. 1033-1036.

Lepage, Richard. 1993. « The fusion of stereo and shape from shading with a multiresolution neural net ». In IRIS-PRECARN Third Annual Conference (Ottawa, ON, Canada, June 8-11, 1993) p. 27.

Levay, J., Tournier, J. P., Arès, R. et Leboeuf, Denis. 1993. « Riprap stability studies on dams and dykes of the La Grande complex - Phase 1 ». In Proceedings of Canadian Dam Safety Conference : St. John's, Newfoundland, September/93 (Saint John, NL, Canada, Sept.,1993) Richmond, BC, Canada : Bitech.

Mailloux, Guy E., Noumeir, Rita et Lemieux, Raymond. 1993. « Deriving the multiplicative algebraic reconstruction algorithm (MART) by the method of convex projection (POCS) ». In 1993 IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP-93) (Minneapolis, MN, USA, Apr. 27-30, 1993) pp. 457-460. IEEE.
Compte des citations dans Scopus : 8.

Mailloux, Guy E., Noumeir, Rita et Lemieux, Raymond. 1993. « MENT algorithm with non uniform entropy function ». In Proceedings of the 15th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (San Diego, CA, USA, Oct. 31, 1993) pp. 140-141. IEEE.

Marchand, Françoise, Côté, M. et Galopin, Michel. 1993. « L'ingénierie pour les femmes ». In Transformer les sciences et la technologie: Les actes de la septième Conférence internationale sur l'équité des sexes en sciences et en technologie (Waterloo, ON, Canada, 31 juil.-5 août 1993) Waterloo, ON, Canada : Université de Waterloo.

Mason, Lorne G., Dziong, Zbigniew et Tetreault, Nicole. 1993. « Fair-efficient call admission control policies for broadband networks ». In IEEE International Conference on Communications (Geneva, Switzerland, May 23-26, 1993) pp. 976-981. IEEE.

Masounave, Jacques, Marchand, Françoise, Hamelin, Daniel et Fenkam, Serge. 1993. « Machining in semi-liquid ». In 2nd International Conference on the Processing of Semi-Solid Alloys and Composites (Cambridge, MA, USA, June 10-12, 1992) pp. 130-139. Warrendale, PA, USA : Minerals, Metals & Materials Society.
Compte des citations dans Scopus : 1.

McComber, Pierre, Druez, J. et Laflamme, J.. 1993. « A comparison of different simulation models for glaze accretion ». In Proceedings of the sixth International Workshop on the Atmospheric Icing of Structures (Budapest, Hungary, Sept. 20-23, 1993) pp. 41-46.

McComber, Pierre et Paradis, A.. 1993. « An icing study for a future suspended bridge at montmorency-falls ». In Proceedings of the Sixty-First Annual Western Snow Conference (Quebec, QC, Canada, June 8-10, 1993) pp. 415-422. Western Snow Conference.

Melhado, S. B.. 1993. « A qualidade na construção civil e o projeto de edifícios ». In Anais do V Encontro Nacional de Tecnologia do Ambiente Construído (ENTAC): Avanços em Tecnologia e Gestão da Produção e Gestão de Edificações (Sao Paulo, Brazil pp. 703-704. ANTAC.

Miresco, Edmond T., Windisch, H. et Gruia-Gray, J.. 1993. « Expert system to asses the air quality in highrise buildings ». In Computer applications in industry and engineering : proceedings of the ISCA international conference (Honolulu, HI, USA, Dec. 15-17, 1993) pp. 94-98. Raleigh, NC, USA : International Society for Computers and their Applications (ISCA).

Mullins, D. et Leconte, Robert. 1993. « Determination of wetland water level changes using c-bar SAR imagery ». In Actes du 16e symposium canadien de télédétection / 8e congrès de l'association québécoise de télédétection (Sherbrooke, QC, Canada, June, 2013) pp. 337-340. L'Association québécoise de télédétection et la Société canadienne de télédétection.

Noumeir, Rita, Mailloux, Guy E. et Lemieux, Raymond. 1993. « A map approach with computed mean prior for image reconstruction ». In Proceedings of the 15th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (San Diego, CA, USA, Oct. 31, 1993) pp. 138-139. IEEE.

Noumeir, Rita, Mailloux, Guy E. et Lemieux, Raymond. 1993. « Accelerated iterative reconstruction based on the maximum a posteriori expectation maximization ». In 1993 IEEE International Conference on Acoustics, Speech, and Signal Processing (ICASSP-93) (Minneapolis, MN, USA, Apr. 27-30, 1993) pp. 469-472. IEEE.
Compte des citations dans Scopus : 1.

Olivier, Claude, Montreuil, B. et Maley, J. G.. 1993. « Conception de patron de flux dans une usine d'assemblage flexible ». In GSI 4 - 4ème congrès international de génie industriel (Marseille, France, 15-17 déc. 1993) pp. 277-286. Marseille, France : Institut universitaire des sciences pour l'ingénieur de Marseille.

Païdoussis, Michael P. et Botez, Ruxandra. 1993. « Routes to chaos for an articulated system in axial flow ». In Proceedings 14th Canadian Congress of Applied Mechanics = Comptes Rendus le 14e Congrès Candien de Méchanique Appliquée (CANCAM) (Kingston, ON, Canada, May 30 -04 june, 1993) pp. 257-258. Queen's University at Kingston.

Papineau, R. L. et Garceau, J. J.. 1993. « Must you be a technician to become a good engineer? ». In 2nd east-west congress on engineering education : proceedings (Lodz, Pologne, 20-24 sept. 1993) pp. 303-307. Sydney : Electrical Engineering Research Group.

Raja, P., Hernandez, J., Ruiz, L., Fuhrman, C. P. et Decotignie, J. D.. 1993. « DRUGH: a simulator for distributed realtime applications ». In European Simulation Symposium 1993: October 25-28, 1993, Delft University of Technology, Delft, the Netherlands; [dynamic modelling and information systems, multimedia systems and virtual reality, high-performance computing and simulation, new trends in m (Delft, The Netherlands, Oct. 25-28, 1993) San Diego, CA, USA : SCS.

Raja, P., Ruiz, L., Hernandez, J., Fuhrman, C., Noubir, G. et Decotignie, J. D.. 1993. « Synchronous model for Fieldbus applications ». In International Conference on Industrial Electronics, Control, and Instrumentation, 1993. Proceedings of the IECON '93. (Maui, HI, USA, Nov. 15-19, 1993) pp. 525-529. IEEE.
Compte des citations dans Scopus : 2.

Rivest, Louis, Fortin, C. et Desrochers, Alain. 1993. « Tolerance modeling for 3D analysis – presenting a kinematic formulation ». In Proceedings of 3rd CIRP seminars on computer aided tolerancing = Tolérancement géométrique (Cachan, France, Apr. 27-28, 1993) pp. 51-74. Paris, France : Éditions Eyrolles.

Rivest, Louis, Fortin, Clément et Morel, Claude. 1993. « Tolerancing a solid model with a kinematic formulation ». In Proceedings of the 2nd Symposium on Solid Modeling and Applications (Montreal, QC, Canada, May 19-21, 1993) pp. 357-366. New York, NY, United States : ACM.
Compte des citations dans Scopus : 6.

Robert, Jean-Marc. 1993. « Geometric orderings and Helly-type theorem for intersecting translates in the plane ». In Fifth Canadian Conference on Computational Geometry (CCCG) (Waterloo, ON, Canada, Aug. 05-09, 1993) pp. 61-66. University of Waterloo.

Sabourin, Robert, Cheriet, Mohamed et Genest, Christian. 1993. « An extended-shadow-code based approach for off-line signature verification ». In Proceedings of 2nd International Conference on Document Analysis and Recognition (ICDAR '93) (Tsukuba Science City, Japan, Oct. 20-22, 1993) pp. 1-5. Los Alamitos, CA, USA : Institute of Electrical and Electronics Engineers (IEEE).

Sati, Marwan, de Guise, Jacques A. et Drouin, G.. 1993. « Design and development of a non invasive system to measure in vivo kinematic animations of knee movement ». In 2nd International Symposium on 3D Analysis of Human Movement (Poitiers, France, June 30-July 3, 1993) pp. 21-24.

Savaria, Y. et Thibeault, Claude. 1993. « An inexpensive method of testing localized parametric defects in static RAM ». In Records of the 1993 IEEE International workshop on memory testing (San Jose, CA, USA, Aug. 9-10, 1993) pp. 90-95. Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 1.

Simon, Christophe, Levrat, Eric, Sabourin, Robert et Bombardier, Vincent. 1993. « Vérification automatique des signatures manuscrites par classification floue ». In Actes des 3ème journées nationales sur les applications des ensembles flous (Nîmes, France, 26-27 oct. 1993)

Soulaïmani, Azzeddine. 1993. « Finite element simulation of free surface flows using arbitrary Lagrangian-Eulerian method ». In Proceedings of the International Conference on Computational Modelling of Free and Moving Boundary Problems (Milan, Italy, June, 1993) pp. 207-214. Southampton, UK : Computational Mechanics Publications.

Tahan, S. A., Kamwa, I., Viarouge, P. et Ferfra, M.. 1993. « A generalized model of satured synchronous machines ». In Computational aspects of electromechanical energy converters and drives, 7-8-9 July 1993 : proceedings [of the the] 4th international conference = La modelisation en simulation des machines electriques et des convertisseurs statiques, 7-8-9 Juillet 1993 : (Montreal, QC, Canada, July 7-9, 1993) pp. 585-590. International Association for Mathematics and Computers in Simulation.

Tahan, S. A., Kamwa, I., Viarouge, P., Ferfra, M. et Le-Huy, H.. 1993. « Identification of solid-rotor asynchronous-machine parameters from standstill tests in the time domain using nonlinear techniques ». In Computational aspects of electromechanical energy converters and drives, 7-8-9 July 1993 : proceedings [of the the] 4th international conference = La modelisation en simulation des machines electriques et des convertisseurs statiques, 7-8-9 Juillet 1993 : (Montreal, QC, Canada, July 7-9, 1993) pp. 603-608. International Association for Mathematics and Computers in Simulation.

Tétreault, Mario, Marcos, B. et Lapointe, J.. 1993. « Forcing function and time delay in qualitative simulation ». In Proceedings of Artificial Intelligence in Engineering VIII (Toulouse, France, June 29-Jul. 1, 1993) pp. 109-120. Southampton, UK : Computational Mechanics Publications.

Thomas, Marc et Beauchamp, Yves. 1993. « Expériences d'intervention sur les vibrations transmises au corps entier lors de la conduite de véhicules ». In Compte rendu du 3e colloque, Association des médecins du réseau public en santé au travail du Québec (Montréal, QC, Canada, Oct. 1993) pp. 192-203.

Thomas, Marc, Beauchamp, Yves, Juneja, B. L., Pujara, K. K. et Sager, R.. 1993. « Prediction of surface roughness for turning using only controlled cutting parameters ». In CAD/CAM, robotics, and autonomous factories : proceedings of INCARF-93, Indian Institute of Technology, New Delhi, India, December 16-19, 1993 (New Delhi, India, 16-19 déc. 1993) pp. 517-526. New Delhi, India : Tata McGraw-Hill.

Tou, M., Chaffaï, R., Al-Haddad, K., Olivier, G. et Rajagopalan, V.. 1993. « New high power factor rectifier using soft commutated switches ». In Computational aspects of electromechanical energy converters and drives, 7-8-9 July 1993 : proceedings [of the the] 4th international conference = La modelisation en simulation des machines electriques et des convertisseurs statiques, 7-8-9 Juillet 1993 : (Montreal, QC, Canada, July 7-9, 1993) pp. 451-456. International Association for Mathematics and Computers in Simulation.

Tou, Mohamed, Chaffai, Rachid, Al-Haddad, Kamal, Olivier, Guy et Rajagopalan, V.. 1993. « Analysis and design considerations of a unity power-factor quasi-resonant rectifier ». In International Conference on Industrial Electronics, Control, and Instrumentation (Maui, HI, USA, Nov. 15-18, 1993) pp. 930-935. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 1.

Viens, M., Li, P. C. H., Wang, Z., Jen, C. K., Thompson, M. et Cheeke, J. D. N.. 1993. « Gravimetric response of thin rod acoustic wave sensors ». In 1993 Proceedings IEEE Ultrasonics Symposium (Baltimore, MD, USA, Oct. 31-Nov. 03, 1993) pp. 359-364. IEEE.
Compte des citations dans Scopus : 3.

Wang, H. et Vu-Khanh, Toan. 1993. « Large deflection correction for mode II toughness measurement of composite materials ». In Proceedings of the 1993 9th International Conference on Composite Materials: ICCM- 9 : Metal Matrix Composites (Madrid, Spain, July 12-16, 1993) pp. 919-926.

Wong, Tony, Gargour, Christian et Batani, Naïm. 1993. « A DSP realization of a CELP testbench ». In Proceedings of Canadian Conference on Electrical and Computer Engineering (Vancouver, BC, Canada, Sept. 14-17, 1993) pp. 167-170. New York, NY, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 1.

Wu, Hanquing, Stathopoulos, Theodore et Bédard, Claude. 1993. « Computer-based building design and pedestrian-level wind conditions ». In Proceedings of the 5th International Conference on Computing in Civil and Building Engineering - V-ICCCBE (Anaheim, CA, USA, June 7-9, 1993) pp. 1167-1174. New York, NY, USA : ASCE.
Compte des citations dans Scopus : 1.

Xiao, X. R. et Vu-Khanh, Toan. 1993. « The effect of molding temperature on the mode-I crack propagation behaviour of APC-2 composite ». In Second Canadian International Composites Conference and Exhibition, Ottawa, Ontario, Canada 1993 = Deuxième conférence et exposition internationale Canadienne sur les composites (Ottawa, ON, Canada, Sept. 27-29, 1993) pp. 649-658. Montreal, Québec : Canadian association for composites structures and materials.

Xiong, Y. F., LeQuoc, Sinh et Cheng, R. M. H.. 1993. « Stochastic adaptive control of multivariable systems with dead-zone nonlinearities ». In Proceedings of the 1993 American Control Conference (San Francisco, CA, USA, June 2-4, 1993) pp. 489-493. Evanston, IL, USA : American Autom. Control Council.
Compte des citations dans Scopus : 1.