FRANÇAIS
A showcase of ÉTS researchers’ publications and other contributions
SEARCH

The affiliation is "Génie mécanique"

Export as [Atom feed] Atom [RSS feed] RSS 1.0 [RSS2 feed] RSS 2.0
Group by: Professor | Year | Item Type | No order
Number of items: 316.

Akhrif, Ouassima

Ibrahem, Ibrahem M. A., Akhrif, Ouassima, Moustapha, Hany et Staniszewski, Martin. 2021. « Nonlinear generalized predictive controller based on ensemble of NARX models for industrial gas turbine engine ». Energy, vol. 230.

Ibrahem, Ibrahem Mohamed, Akhrif, Ouassima, Moustapha, Hany et Staniszewski, Martin. 2021. « An ensemble of recurrent neural networks for real time performance modelling of three-spool aero-derivative gas turbine engine ». Journal of Engineering for Gas Turbines and Power, vol. 143, nº 10.

Beauregard, Yvan

Abu Zwaida, Tarek, Elaroudi, Khalil et Beauregard, Yvan. 2021. « The challenges of drug shortages in the Canadian hospital pharmacy supply chain : A systematic literature review ». Journal of Public Health (Germany).
(In press)

Amrollahibiouki, Shahab et Beauregard, Yvan. 2021. « Operating room scheduling by considering surgical inventory, post anesthesia beds, and emergency surgeries to improve efficiency during the COVID-19 outbreak with machine learning ». In Proceedings of the 11th Annual International Conference on Industrial Engineering and Operations Management (Singapore, Singapore, March 07-11, 2021) pp. 2264-2276. IEOM Society International.

Asgari, Alireza, Kibala, Muke et Beauregard, Yvan. 2021. « A framework for the risk assessment of residual hazardous material in the dynamic environment of a composite production process considering operational time variation ». Process Safety Progress, vol. 40, nº 1.

Jaifer, Rabie, Beauregard, Yvan et Bhuiyan, Nadia. 2021. « New framework for effort and time drivers in aerospace product development projects ». EMJ - Engineering Management Journal, vol. 33, nº 2. pp. 76-95.

Tehrani, Mahdi Mohammadi, Mobin, Mohammadsadegh, Beauregard, Yvan, Rioux, Michel et Kenné, Jean Pierre. 2021. « Multi-scenario and multi-criteria approach to evaluate prediction techniques used to recognise failure patterns ». International Journal of Applied Decision Sciences (IJADS), vol. 14, nº 4. pp. 361-386.

Zaabar, Imen, Arango-Miranda, Raul, Beauregard, Yvan et Paquet, Marc. 2021. « A sustainable multicriteria decision framework for obsolescence resolution strategy selection ». Sustainability, vol. 13, nº 15.

Zwaida, Tarek Abu, Pham, Chuan et Beauregard, Yvan. 2021. « Optimization of inventory management to prevent drug shortages in the hospital supply chain ». Applied Sciences, vol. 11, nº 6.

Bocher, Philippe

Bridier, Florent, Bocher, Philippe, Cormier, Jonathan et Villechaise, Patrick (inventeurs) 5 October 2021. « Method for heat treating by induction an alloy component for generating microstructure gradients and an alloy component heat treated according to the method ». École de technologie supérieure, Institut supérieur de l'aéronqutique et de l'espace - École nationale supérieure de mécanique et d'aérotechnique (ISAEENSMA) (titulaire(s)). US 11,136,634.

Foroozmehr, Fayaz et Bocher, Philippe. 2021. « An investigation on fracture toughness of the heat-affected zone in the welded joints of 13% Cr-4% Ni martensitic stainless steels ». Fatigue & Fracture of Engineering Materials & Structures.
(In press)

Herrera-Jimenez, E. J., Vanderesse, N., Bousser, E., Schmitt, T., Bocher, P., Martinu, L. et Klemberg-Sapieha, J. E.. 2021. « Fracture mechanism of TiN coatings on Ti-6Al-4V substrates : Role of interfaces and of the residual stress depth profile ». Surface and Coatings Technology, vol. 426.

Masoumi Khalilabad, Mahdi, Zedan, Yasser, Texier, Damien, Jahazi, Mohammad et Bocher, Philippe. 2021. « Effect of heat treatments on microstructural and mechanical characteristics of dissimilar friction stir welded 2198/2024 aluminum alloys ». Journal of Adhesion Science and Technology.
(In press)

Maurel, Pierre, Weiss, Laurent, Bocher, Philippe et Grosdidier, Thierry. 2021. « Effects of SMAT at cryogenic and room temperatures on the kink band and martensite formations with associated fatigue resistance in a β-metastable titanium alloy ». Materials Science and Engineering A, vol. 803.

Milton, Samuel, Rigo, Olivier, LeCorre, Sebastien, Morandeau, Antoine, Siriki, Raveendra, Bocher, Philippe et Leroy, Rene. 2021. « Microstructure effects on the machinability behaviour of Ti6Al4V produced by Selective Laser Melting and Electron Beam Melting process ». Materials Science and Engineering A, vol. 823.

Perard, Thomas, Sova, Alexey, Robe, Hugo, Robin, Vincent, Zedan, Yasser, Bocher, Philippe et Feulvarch, Eric. 2021. « Friction stir processing of austenitic stainless steel cold spray coating deposited on 304L stainless steel substrate: Feasibility study ». International Journal of Advanced Manufacturing Technology, vol. 115, nº 7-8. pp. 2379-2393.

Zedan, Y., Iben Houria, M., Vanderesse, N., Atmani, F., Mirakhorli, F., Nadeau, F., Demers, V. et Bocher, P.. 2021. « Fatigue properties of continuous wave and pulsed wave laser cold-wire welding of thick section AA6005-T6 aluminum alloys ». International Journal of Fatigue, vol. 147.

Botez, Ruxandra

Elelwi, M., Calvet, T., Botez, R. M. et Dao, T. M.. 2021. « Wing component allocation for a morphing variable span of tapered wing using finite element method and topology optimisation - Application to the UAS-S4 ». Aeronautical Journal, vol. 125, nº 1290. pp. 1313-1336.

Elelwi, Mohamed, Botez, Ruxandra Mihaela et Dao, Thien-My. 2021. « Structural sizing and topology optimization based on weight minimization of a variable tapered span-morphing wing for aerodynamic performance improvements ». Biomimetics, vol. 6, nº 4.

Boton, Conrad

Tiaya Tedonchio, Christian, Nadeau, Sylvie, Boton, Conrad et Rivest, Louis. 2021. « BIM and PLM-based management of occupational health and safety: A comparative literature review ». In Proceedings of the 38th International Conference of CIB W78 (Luxembourg, Oct. 13-15, 2021) pp. 892-901.

Bouzid, Hakim

Benfriha, Khaled, El-Zant, Chawki, Charrier, Quentin, Bouzid, Abdel-Hakim, Wardle, Peter, Belaidi, Idir, Loubère, Stéphane, Ghodsian, Nooshin et Aoussat, Améziane. 2021. « Development of an advanced MES for the simulation and optimization of industry 4.0 process ». International Journal for Simulation and Multidisciplinary Design Optimization, vol. 12.

Bouzid, Abdel-Hakim et Das, Shubhra Kanti. 2021. « High temperature aged leakage relaxation screening tests on confined flexible graphite gaskets ». In ASME 2021 Pressure Vessels & Piping Conference (En ligne, July 13-15, 2021) American Society of Mechanical Engineers (ASME).

Bouzid, Abdel-Hakim, Touahri, Hacène et Benfriha, Khaled. 2021. « Analytical solution of aluminum alloy plates with holes subjected to cold expansion with reverse yielding ». Journal of Pressure Vessel Technology, vol. 143, nº 4.

Bouzid, Adbel-Hakim. 2021. « A study on liquid leak rates in packing seals ». Applied Sciences, vol. 11, nº 4.

Mouaa, Amal, Laghzale, Nor Eddine et Bouzid, Abdel-Hakim. 2021. « Analytical modelling of interference fit joints with power law strain-hardening behavior ». International Review on Modelling and Simulations, vol. 14, nº 1. pp. 24-31.

Mouaa, Amal, Laghzale, Nor Eddine et Bouzid, Abdel-Hakim. 2021. « Creep analysis of plastically deformed shrink-fitted joints ». Arabian Journal for Science and Engineering.
(In press)

Rousseau, Rashique Iftekhar, Bouzid, Abdel-Hakim et Zhao, Zijan. 2021. « Accurate evaluation of bolt and clamped members stiffnesses of bolted joints ». In ASME 2021 Pressure Vessels & Piping Conference (En ligne, July 13-15, 2021) American Society of Mechanical Engineers (ASME).

Thekkuden, Dinu Thomas, Mourad, Abdel-Hamid Ismail et Bouzid, Abdel-Hakim. 2021. « Failures and leak inspection techniques of tube-to-tubesheet joints: A review ». Engineering Failure Analysis, vol. 130.

Zhao, Zijan et Bouzid, Abdel-Hakim. 2021. « Stress analysis of tubes during die expansion process ». In ASME 2021 Pressure Vessels & Piping Conference (En ligne, July 13-15, 2021) American Society of Mechanical Engineers (ASME).

Zhu, Linbo, Bouzid, Abdel-Hakim et Hong, Jun. 2021. « A method to reduce the number of assembly tightening passes in bolted flange joints ». Journal of Manufacturing Science and Engineering, vol. 143, nº 12.

Brailovski, Vladimir

Amor, Sabrine Ben, Zongo, Floriane, Louhichi, Borhen, Brailovski, Vladimir et Tahan, Antoine. 2021. « Classification of dimensional deviation in additive manufacturing LPBF process for AlSi10Mg alloy according to ISO 286 and ANSI B4.2 ». In 41st Computers and Information in Engineering Conference, CIE 2021, Held as Part of the ASME 2021 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC-CIE 2021 (En ligne, Aug. 17-19, 2021) American Society of Mechanical Engineers (ASME).

Constant, Caroline, Braïlovski, Vladimir, Wagnac, Éric, Petit, Yvan, Desrochers, André et Nichols, Sylvain. 2021. « Biomechanical evaluation of bovine stifles stabilized with an innovative braided superelastic nitinol prosthesis after transection of the cranial cruciate ligament ». Veterinary Surgery.
(In press)

Dubinskiy, Sergey, Prokoshkin, Sergey, Sheremetyev, Vadim, Konopatsky, Anton, Korotitskiy, Andrey, Tabachkova, Natalia, Blinova, Elena, Glezer, Alexander et Brailovski, Vladimir. 2021. « The mechanisms of stress-induced transformation in ultimately fine-grained titanium nickelide, and critical grain size for this transformation ». Journal of Alloys and Compounds, vol. 858.

Dubois, P. K., Landry-Blais, A., Gazzah, R., Sivic, S., Brailovski, V. et Picard, M.. 2021. « Cooling performance of additively manufactured pin fins in stacked microchannels for the inside-out ceramic turbine shroud-cooling ring ». In ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition : Conference Proceedings (En ligne, June 07-11, 2021) American Society of Mechanical Engineer.

Fayed, Eslam M., Saadati, Mohammad, Shahriari, Davood, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun. 2021. « Effect of homogenization and solution treatments time on the elevated-temperature mechanical behavior of Inconel 718 fabricated by laser powder bed fusion ». Scientific Reports, vol. 11, nº 1.

Fayed, Eslam M., Saadati, Mohammad, Shahriari, Davood, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun. 2021. « Optimization of the post-process heat treatment of inconel 718 superalloy fabricated by laser powder bed fusion process ». Metals, vol. 11, nº 1.

Kalinicheva, V., Sheremetyev, V., Letenneur, M., Konopatsky, A., Prokoshkin, S. et Brailovski, V.. 2021. « Effect of thermal treatment on the structure and hardness of the laser powder bed-fused Ti-Zr-Nb shape memory alloy ». In Annual School of Young Scientists 2020: "Synthesis, Structure and Properties of High Entropy Materials" (Belgorod, Russia, Oct. 14-16, 2020) Coll. « IOP Conference Series: Materials Science and Engineering », vol. 1014. UK : IOP Publishing.

Konopatsky, A., Sheremetyev, V., Dubinskiy, S., Zhukova, Y., Firestein, K., Golberg, D., Filonov, M., Prokoshkin, S. et Brailovski, V.. 2021. « Structure and superelasticity of novel Zr-Rich Ti-ZrNb shape memory alloys ». Shape Memory and Superelasticity.
(In press)

Majdi, Seyed Mohammad, Tafti, Atefeh Ayatollahi, Demers, Vincent, Vachon, Guillem et Brailovski, Vladimir. 2021. « Effect of powder particle shape and size distributions on the properties of low-viscosity iron-based feedstocks used in low-pressure powder injection moulding ». Powder Metallurgy.
(In press)

Poulin, J. R., Kreitcberg, A. et Brailovski, V.. 2021. « Effect of hot isostatic pressing of laser powder bed fused Inconel 625 with purposely induced defects on the residual porosity and fatigue crack propagation behavior ». Additive Manufacturing, vol. 47.

Samoilenko, Mykhailo, Lanik, Greg et Brailovski, Vladimir. 2021. « Towards the determination of machining allowances and surface roughness of 3D-printed parts subjected to abrasive flow machining ». Journal of Manufacturing and Materials Processing, vol. 5, nº 4.

Sheremetyev, V., Dubinskiy, S., Iqbal, M. A., Lukashevich, K., Prokoshkin, S. et Brailovski, V.. 2021. « Effect of dynamic chemical etching on the pore structure, permeability, and mechanical properties of Ti-Nb-Zr scaffolds for medical applications ». Journal of Manufacturing Science and Engineering, vol. 143, nº 5.

Tafti, Atefeh A., Demers, Vincent, Majdi, Seyed M., Vachon, Guillem et Brailovski, Vladimir. 2021. « Effect of thermal debinding conditions on the sintered density of low-pressure powder injection molded iron parts ». Metals, vol. 11, nº 2.

Tafti, Atefeh A., Demers, Vincent, Vachon, Guillem et Brailovski, Vladimir. 2021. « Effect of binder constituents and solids loading on the rheological behavior of irregular iron-based feedstocks ». Journal of Manufacturing Science and Engineering, vol. 143, nº 3.

Timercan, Anatolie, Sheremetyev, Vadim et Brailovski, Vladimir. 2021. « Mechanical properties and fluid permeability of gyroid and diamond lattice structures for intervertebral devices: functional requirements and comparative analysis ». Science and Technology of Advanced Materials, vol. 22, nº 1. pp. 285-300.

Turnier Trottier, William, Kreitcberg, Alena et Brailovski, Vladimir. 2021. « Structure and mechanical properties of laser powder bed-fused and wrought ph13-8mo-type precipitation hardening stainless steels: Comparative study ». Journal of Manufacturing and Materials Processing, vol. 5, nº 3.

Xuan, T. D., Sheremetyev, V. A., Komarov, V. S., Kudryashova, A. A., Galkin, S. P., Andreev, V. A., Prokoshkin, S. D. et Brailovski, V.. 2021. « Comparative study of superelastic Ti–Zr–Nb and commercial VT6 alloy billets by QForm simulation ». Russian Journal of Non-Ferrous Metals, vol. 62, nº 1. pp. 39-47.

Bélanger, Pierre

Chaboty, Aubin, Dupont-Marillia, Frédéric et Bélanger, Pierre. 2021. « Propagation of low frequency ultrasonic guided waves through welded lap joint ». Journal of Nondestructive Evaluation, vol. 40, nº 2.

Chapon, Arthur, Pereira, Daniel, Toews, Matthew et Belanger, Pierre. 2021. « Deconvolution of ultrasonic signals using a convolutional neural network ». Ultrasonics, vol. 111.

Dupont-Marillia, Frederic, Jahazi, Mohammad et Belanger, Pierre. 2021. « Phased array probe for the inspection of large steel forgings ». Cogent Engineering, vol. 8, nº 1.

Filho, Jorge Franklin Mansur Rodrigues et Bélanger, Pierre. 2021. « Probe standoff optimization method for phased array ultrasonic TFM imaging of curved parts ». Sensors, vol. 21, nº 19.

Gauthier, Baptiste, Painchaud-April, Guillaume, Le Duff, Alain et Bélanger, Pierre. 2021. « Towards an alternative to time of flight diffraction using instantaneous phase coherence imaging for characterization of crack-like defects ». Sensors, vol. 21, nº 3.

Gupta, Shreyank, Haiat, Guillame, Laporte, Catherine et Belanger, Pierre. 2021. « Effect of the acoustic impedance mismatch at the bone-soft tissue interface as a function of frequency in transcranial ultrasound: A simulation and in-vitro experimental study ». IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 68, nº 5. pp. 1653-1663.

Kwak, Yunsang, Nguyen, Vu-Hieu, Hériveaux, Yoann, Belanger, Pierre, Park, Junhong et Haïat, Guillaume. 2021. « Ultrasonic assessment of osseointegration phenomena at the bone-implant interface using convolutional neural network ». Journal of the Acoustical Society of America, vol. 149, nº 6. pp. 4337-4347.

Latête, Thibault, Gauthier, Baptiste et Belanger, Pierre. 2021. « Towards using convolutional neural network to locate, identify and size defects in phased array ultrasonic testing ». Ultrasonics, vol. 115.

Cardinal, Patrick

Chabot, Philippe, Bouserhal, Rachel E., Cardinal, Patrick et Voix, Jérémie. 2021. « Detection and classification of human-produced nonverbal audio events ». Applied Acoustics, vol. 171.

Chaabane, Amin

Le, Phuoc Luong, Jarroudi, Imen, Dao, Thien-My et Chaabane, Amin. 2021. « Integrated construction supply chain: An optimal decision-making model with third-party logistics partnership ». Construction Management and Economics, vol. 39, nº 2. pp. 133-155.

Champliaud, Henri

Bouissa, Yassine, Zorgani, Muftah, Shahriari, Davood, Champliaud, Henri, Morin, Jean-Benoît et Jahazi, Mohammad. 2021. « Microstructure-based FEM modeling of phase transformation during quenching of large-size steel forgings ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 52, nº 5. pp. 1883-1900.

Brodeur, Samuel, Le, Van Ngan et Champliaud, Henri. 2021. « A nonlinear finite-element analysis tool to prevent rupture of power transformer tank ». Sustainability, vol. 13, nº 3.

Paradis, P. Y. et Champliaud, H.. 2021. « New correlations for heat transfer in parallel-plate ducts at low Peclet number ». International Journal of Heat and Mass Transfer, vol. 178.

Chatelain, Jean-François

Arslane, Mustapha, Slamani, Mohamed et Chatelain, Jean-François. 2021. « Development and validation of a machining fixture for complex-shaped components based on Pluckerian matrix approach and SDT concept ». International Journal of Advanced Manufacturing Technology, vol. 114. pp. 1697-1716.

Castillo-Morales, Arquimedes, Rimpault, Xavier, Chatelain, Jean-François et Lebrun, Gilbert. 2021. « Temperature study during the edge trimming of carbon fiber-reinforced plastic [0]8 /ti6al4v stack material ». Journal of Composites Science, vol. 5, nº 5.

Demers, Vincent, Lamarre, Simon et Chatelain, Jean-François (inventeurs) 16 February 2021. « Low-pressure powder injection molding machine, kit and method ». École de technologie supérieure (titulaire(s)). US 10,919,092.

Slamani, Mohamed, Chatelain, Jean-Francois, Il, Alexandre et Balazinski, Marek. 2021. « Statistical analysis and modeling of temperature distribution during various milling operations of thin walled aircraft parts ». Physica A: Statistical Mechanics and its Applications, vol. 570.

Slamani, Mohamed, Karabibene, Nouha, Chatelain, Jean-François et Beauchamp, Yves. 2021. « Edge trimming of flax fibers and glass fibers reinforced polymers composite – An experimental comparative evaluation ». International Journal of Material Forming.
(In press)

Slamani, Mohamed, Karabibene, Nouha, Chatelain, Jean-Francois, Rimpault, Xavier et Beauchamp, Yves. 2021. « Statistical analysis of surface roughness during high speed edge trimming of flax-fiber composite based on the Split-Split plot randomized complete block design ». Measurement: Journal of the International Measurement Confederation, vol. 184.

Xing, K., Rimpault, X., Mayer, J. R. R., Chatelain, J. F. et Achiche, S.. 2021. « Quantitative assessment of machine tools precision states through fractal analysis of machine error parameters ». In 14th International Conference on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance (LAMDAMAP) (En ligne, Mar. 10-11, 2021) pp. 43-52. euspen.

Dagdeviren, Omur

Dagdeviren, Omur E.. 2021. « Confronting interatomic force measurements ». Review of Scientific Instruments, vol. 92, nº 6.

Dagdeviren, Omur E., Glass, Daniel, Sapienza, Riccardo, Cortés, Emiliano, Maier, Stefan A., Parkin, Ivan P., Grütter, Peter et Quesada-Cabrera, Raul. 2021. « The effect of photoinduced surface oxygen vacancies on the charge carrier dynamics in TiO2 Films ». Nano Letters, vol. 21, nº 19. pp. 8348-8354.

Yu, Jiaxin, Datye, Amit, Chen, Zheng, Zhou, Chao, Dagdeviren, Omur E., Schroers, Jan et Schwarz, Udo D.. 2021. « Atomic-scale homogeneous plastic flow beyond near-theoretical yield stress in a metallic glass ». Communications Materials, vol. 2, nº 1.

Dao, Thien-My

Ahmid, Ali, Dao, Thien-My et Le, Ngan Van. 2021. « Enhanced hyper-cube framework ant colony optimization for combinatorial optimization problems ». Algorithms, vol. 14, nº 10.

Elelwi, M., Calvet, T., Botez, R. M. et Dao, T. M.. 2021. « Wing component allocation for a morphing variable span of tapered wing using finite element method and topology optimisation - Application to the UAS-S4 ». Aeronautical Journal, vol. 125, nº 1290. pp. 1313-1336.

Elelwi, Mohamed, Botez, Ruxandra Mihaela et Dao, Thien-My. 2021. « Structural sizing and topology optimization based on weight minimization of a variable tapered span-morphing wing for aerodynamic performance improvements ». Biomimetics, vol. 6, nº 4.

Le, Phuoc Luong, Jarroudi, Imen, Dao, Thien-My et Chaabane, Amin. 2021. « Integrated construction supply chain: An optimal decision-making model with third-party logistics partnership ». Construction Management and Economics, vol. 39, nº 2. pp. 133-155.

David, Éric

Alqudsi, Alhaytham Y., Ghunem, Refat A. et David, Eric. 2021. « A novel framework to study the role of ground and fumed silica fillers in suppressing DC erosion of silicone rubber outdoor insulation ». Energies, vol. 14, nº 12.

Alqudsi, Alhaytham Y., Ghunem, Refat A. et David, Éric. 2021. « Analyzing the role of filler interface on the erosion performance of filled RTV silicone rubber under DC dry-band arcing ». IEEE Transactions on Dielectrics and Electrical Insulation, vol. 28, nº 3. pp. 788-796.

Danouj, B., Tahan, S. A., David, E. et Lotfi, M.. 2021. « Partial discharges location in power transformers using piezoceramic sensors ». International Journal of Electrical and Computer Engineering, vol. 11, nº 3. pp. 1942-1950.

Gnonhoue, Olatoundji Georges, Velazquez-Salazar, Amanda, David, Éric et Preda, Ioana. 2021. « Review of technologies and materials used in high-voltage film capacitors ». Polymers, vol. 13, nº 5.

Karimi, Samira, Helal, Emna, Gutierrez, Giovanna, Moghimian, Nima, Madinehei, Milad, David, Eric, Samara, Mazen et Demarquette, Nicole. 2021. « A review on graphene’s light stabilizing effects for reduced photodegradation of polymers ». Crystals, vol. 11, nº 1.

Madinehei, Madinehei, Kuester, Scheyla, Kaydanova, Tatiana, Moghimian, Nima et David, Éric. 2021. « Influence of graphene nanoplatelet lateral size on the electrical conductivity and electromagnetic interference shielding performance of polyester nanocomposites ». Polymers, vol. 13, nº 15.

Strugova, Daria, Ferreira Junior, José Carlos, David, Éric et Demarquette, Nicole R.. 2021. « Ultra-low percolation threshold induced by thermal treatments in co-continuous blend-based PP/PS/MWCNTS nanocomposites ». Nanomaterials, vol. 11, nº 6.

De Kelper, Bruno

Guilbeault-Sauvé, Alex, De Kelper, Bruno et Voix, Jérémie. 2021. « Man down situation detection using an in-ear inertial platform ». Sensors, vol. 21, nº 5.

Demarquette, Nicole R.

Azzaz, Cherif M., Mattoso, Luiz H. C., Demarquette, Nicole R. et Zednik, Ricardo J.. 2021. « Polyvinylidene fluoride nanofibers obtained by electrospinning and blowspinning: Electrospinning enhances the piezoelectric β‐phase myth or reality? ». Journal of Applied Polymer Science, vol. 138, nº 10.

de Souza, Ziani S. B., Pinto, Gabriel M., Silva, Giovanna da C., Demarquette, Nicole R., Fechine, Guilhermino J. M. et Sobrinho, Mauricio A. M.. 2021. « Interface adjustment between poly(ethylene terephthalate) and graphene oxide in order to enhance mechanical and thermal properties of nanocomposites ». Polymer Engineering and Science.
(In press)

Guerrini, Lilia M., Oliveira, Maurício P., Stapait, Camila C., Maric, Milan, Santos, Amilton M. et Demarquette, Nicole R.. 2021. « Evaluation of different solvents and solubility parameters on the morphology and diameter of electrospun pullulan nanofibers for curcumin entrapment ». Carbohydrate Polymers, vol. 251.

Karimi, Samira, Helal, Emna, Gutierrez, Giovanna, Moghimian, Nima, Madinehei, Milad, David, Eric, Samara, Mazen et Demarquette, Nicole. 2021. « A review on graphene’s light stabilizing effects for reduced photodegradation of polymers ». Crystals, vol. 11, nº 1.

Rahimnejad, Maedeh, Labonte-Dupuis, Thierry, Demarquette, Nicole R. et Lerouge, Sophie. 2021. « A rheological approach to assess the printability of thermosensitive chitosan-based biomaterial inks ». Biomedical Materials, vol. 16, nº 1.

Strugova, Daria, Ferreira Junior, José Carlos, David, Éric et Demarquette, Nicole R.. 2021. « Ultra-low percolation threshold induced by thermal treatments in co-continuous blend-based PP/PS/MWCNTS nanocomposites ». Nanomaterials, vol. 11, nº 6.

Demers, Vincent

Azzouni, Mohamed, Demers, Vincent et Dufresne, Louis. 2021. « Mold filling simulation and experimental investigation of metallic feedstock used in low-pressure powder injection molding ». International Journal of Material Forming, vol. 14, nº 5. pp. 961-972.

Côté, Raphaël, Azzouni, Mohamed et Demers, Vincent. 2021. « Impact of binder constituents on the moldability of titanium-based feedstocks used in low-pressure powder injection molding ». Powder Technology, vol. 381. pp. 255-268.

Côté, Raphaël, Azzouni, Mohamed, Ghanmi, Oussema, Kapoor, Sarthak et Demers, Vincent. 2021. « Impact of rheological model on numerical simulation of low-pressure powder injection moulding ». Powder Metallurgy, vol. 64, nº 1. pp. 8-16.

Demers, Vincent. 2021. « Review of low-pressure powder injection molding process ». In Proceedings of the 2021 International Conference on Powder Metallurgy & Particulate Materials (PowderMet2021) (Orlando, FL, USA, June 20-23, 2021) Metal Powder Industries Federation.

Demers, Vincent, Lamarre, Simon et Chatelain, Jean-François (inventeurs) 16 February 2021. « Low-pressure powder injection molding machine, kit and method ». École de technologie supérieure (titulaire(s)). US 10,919,092.

Ghanmi, O. et Demers, V.. 2021. « Molding properties of titanium-based feedstock used in low-pressure powder injection molding ». Powder Technology, vol. 379. pp. 515-525.

Majdi, Seyed Mohammad, Tafti, Atefeh Ayatollahi, Demers, Vincent, Vachon, Guillem et Brailovski, Vladimir. 2021. « Effect of powder particle shape and size distributions on the properties of low-viscosity iron-based feedstocks used in low-pressure powder injection moulding ». Powder Metallurgy.
(In press)

Moradi, Mahmoud, Meiabadi, Mohammad Saleh et Demers, Vincent. 2021. « A numerical investigation of friction stir welding parameters in joining dissimilar aluminium alloys using finite element method ». International Journal of Manufacturing Research, vol. 16, nº 1. pp. 32-51.

Tafti, Atefeh A., Demers, Vincent, Majdi, Seyed M., Vachon, Guillem et Brailovski, Vladimir. 2021. « Effect of thermal debinding conditions on the sintered density of low-pressure powder injection molded iron parts ». Metals, vol. 11, nº 2.

Tafti, Atefeh A., Demers, Vincent, Vachon, Guillem et Brailovski, Vladimir. 2021. « Effect of binder constituents and solids loading on the rheological behavior of irregular iron-based feedstocks ». Journal of Manufacturing Science and Engineering, vol. 143, nº 3.

Zedan, Y., Iben Houria, M., Vanderesse, N., Atmani, F., Mirakhorli, F., Nadeau, F., Demers, V. et Bocher, P.. 2021. « Fatigue properties of continuous wave and pulsed wave laser cold-wire welding of thick section AA6005-T6 aluminum alloys ». International Journal of Fatigue, vol. 147.

Doutres, Olivier

Carillo, Kevin, Doutres, Olivier et Sgard, Franck. 2021. « Numerical investigation of the earplug contribution to the low-frequency objective occlusion effect induced by bone-conducted stimulation ». Journal of the Acoustical Society of America, vol. 150, nº 3. pp. 2006-2023.

Carillo, Kévin, Doutres, Olivier et Sgard, Franck. 2021. « On the removal of the open earcanal high-pass filter effect due to its occlusion: A bone-conduction occlusion effect theory ». Acta Acustica, vol. 5. p. 6.

Carillo, Kevin, Doutres, Olivier et Sgard, Franck. 2021. « Principle of an acoustical method for estimating the centroid position of the earcanal wall normal velocity induced by bone-conducted stimulation: Numerical evaluation ». Applied Acoustics, vol. 182.

Colombier, Arthur, Hocine, Chahinez, Sgard, Franck, Doutres, Olivier et Voix, Jérémie. 2021. « Hearing protectors fit-testing: Modeling validation and measurements on manikin of earmuff instrumentation ». Communication lors de la conférence : National Hearing Conservation Association (NHCA) annual conference (En ligne, Feb. 21, 2021).

Luan, Yu, Doutres, Olivier, Nélisse, Hugues et Sgard, Franck. 2021. « Experimental study of earplug noise reduction of a double hearing protector on an acoustic test fixture ». Applied Acoustics, vol. 176. pp. 26-38.

Nélisse, Hugues, Saint-Gaudens, Hugo, Sgard, Franck et Doutres, Olivier. 2021. « Mise au point d’une méthode de mesure objective de l’effet d’occlusion basée sur la voix ». Coll. « Rapports scientifiques », vol. R-1118. Montréal : Institut de recherche Robert-Sauvé en santé et en sécurité du travail. 61 p.

Padois, Thomas, Fischer, Jeoffrey, Doolan, Con et Doutres, Olivier. 2021. « Acoustic imaging with conventional frequency domain beamforming and generalized cross correlation: a comparison study ». Applied Acoustics, vol. 177.

Prenant, Simon, Padois, Thomas, Dupont, Thomas et Doutres, Olivier. 2021. « Influence of mobility completeness and source behavior on the robustness of component-based transfer path analysis methods: A numerical study ». In Proceedings of INTER-NOISE : 2021 International Congress and Exposition of Noise Control Engineering (Washington, DC, USA, Aug. 01-05, 2021) pp. 2949-3943. Institute of Noise Control Engineering.

Terroir, Jonathan, Perrin, Nellie, Wild, Pascal, Doutres, Olivier, Sgard, Franck, Gauvin, Chantal et Negrini, Alessia. 2021. « Assessing the comfort of earplugs: Development and validation of the French version of the COPROD questionnaire ». Ergonomics.
(In press)

Dubé, Martine

Brassard, David, Dubé, Martine et Tavares, Jason R.. 2021. « Modelling resistance welding of thermoplastic composites with a nanocomposite heating element ». Journal of Composite Materials, vol. 55, nº 5. pp. 625-639.

Martin, R. G., Johansson, C., Tavares, J. R. et Dubé, M.. 2021. « Heating rate prediction for induction welding magnetic susceptors ». In 36th Technical Conference of the American Society for Composites 2021: Composites Ingenuity Taking on Challenges in Environment-Energy-Economy, ASC 2021 (En ligne, Sept. 20-22, 2021) pp. 11-23. DEStech Publications.

Martin, Romain Georges, Johansson, Christer, Tavares, Jason Robert et Dubé, Martine. 2021. « Material selection methodology for an induction welding magnetic susceptor based on hysteresis losses ». Advanced Engineering Materials.
(In press)

Dufresne, Louis

Azzouni, Mohamed, Demers, Vincent et Dufresne, Louis. 2021. « Mold filling simulation and experimental investigation of metallic feedstock used in low-pressure powder injection molding ». International Journal of Material Forming, vol. 14, nº 5. pp. 961-972.

Mohammed-Taifour, Abdelouahab, Weiss, Julien et Dufresne, Louis. 2021. « Explicit algebraic reynolds-stress modeling of pressure-induced separating flows in the presence of sidewalls ». Journal of Fluids Engineering, vol. 143, nº 10.

Dupont, Thomas

Dupont, Thomas, Verdière, Kévin, Leclaire, Philippe et Panneton, Raymond. 2021. « Method for controlling boundary condition effects on the measurement of acoustic properties of small samples in tubes ». Review of Scientific Instruments, vol. 92, nº 4.

Kone, Tenon Charly, Ghinet, Sebastian, Panneton, Raymond, Dupont, Thomas et Grewal, Anant. 2021. « Multi-tonal low frequency noise control for aircraft cabin using Helmholtz resonator with complex cavity ». In Proceedings of INTER-NOISE 2021 - 2021 International Congress and Exposition of Noise Control Engineering (Washington, DC, USA, Aug. 01-05, 2021) pp. 3944-4918. The Institute of Noise Control Engineering.

Kone, Tenon Charly, Lopez, Maël, Ghinet, Sebastian, Dupont, Thomas et Panneton, Raymond. 2021. « Thermoviscous-acoustic metamaterials to damp acoustic modes in complex shape geometries at low frequencies ». Journal of the Acoustical Society of America, vol. 150, nº 3. pp. 2272-2281.

Prenant, Simon, Padois, Thomas, Dupont, Thomas et Doutres, Olivier. 2021. « Influence of mobility completeness and source behavior on the robustness of component-based transfer path analysis methods: A numerical study ». In Proceedings of INTER-NOISE : 2021 International Congress and Exposition of Noise Control Engineering (Washington, DC, USA, Aug. 01-05, 2021) pp. 2949-3943. Institute of Noise Control Engineering.

Garnier, François

Cantin, Sébastien, Chouak, Mohamed, Morency, François et Garnier, François. 2021. « Eulerian–Lagrangian CFD-microphysics modeling of a near-field contrail from a realistic turbofan ». International Journal of Engine Research.
(In press)

Henry-Lheureux, Thomas, Seers, Patrice, Ghedhaïfi, Weeded et Garnier, François. 2021. « Overview of emissions at Montreal’s Pierre Elliott Trudeau international airport and impact of local weather on related pollutant concentrations ». Water, Air, and Soil Pollution, vol. 232, nº 5.

Gharbi, Ali

Polotski, Vladmir, Gharbi, Ali et Kenne, Jean-Pierre. 2021. « Production control of unreliable manufacturing systems with perishable inventory ». International Journal of Advanced Manufacturing Technology.
(In press)

Rivera-Gómez, Héctor, Gharbi, Ali, Kenné, Jean-Pierre, Ortiz-Zarco, Ruth et Corona-Armenta, José Ramón. 2021. « Joint production, inspection and maintenance control policies for deteriorating system under quality constraint ». Journal of Manufacturing Systems, vol. 60. pp. 585-607.

Guilbault, Raynald

Aboussafy, Charles et Guilbault, Raynald. 2021. « Chip formation in machining of anisotropic plastic materialsa finite element modeling strategy applied to wood ». International Journal of Advanced Manufacturing Technology, vol. 114, nº 5/6. pp. 1471-1486.

Guilbault, Raynald et Lalonde, Sébastien. 2021. « Tip relief designed to optimize contact fatigue life of spur gears using adapted PSO and firefly algorithms ». SN Applied Sciences, vol. 3, nº 1.

Yalpanian, Ali et Guilbault, Raynald. 2021. « A systematic solution based on the half-space concept for modeling of thermoelastic contact between bodies defined by curved free boundaries ». Acta Mechanica, vol. 232. pp. 5003-5029.

Haillot, Didier

Giordano, N., Piché, P., Gibout, S., Haillot, D., Arrabie, C., Lamalice, A., Rousse, D. R., Py, X. et Raymond, J.. 2021. « Daily and seasonal heat storage for greenhouse food production in Nunavik (Canadian Arctic) ». In Proceedings World Geothermal Congress 2020+1 (Reykjavik, Iceland, May 21-26, 2021)

Haillot, Didier, Lalau, Yasmine, Franquet, Erwin, Rigal, Sacha, Jay, Frederic et Bédécarrats, Jean-Pierre. 2021. « A latent heat storage system for low-temperature applications: From materials selection to prototype performances ». Applied Sciences, vol. 11, nº 21.

Haillot, Didier, Piche, Paul, Sajot, Edgar, Arrabie, Cedric, Monfet, Danielle et Gibout, Stéphane. 2021. « Developing northern greenhouses : An experimental and numerical studies ». Communication lors de la conférence : ENERSTOCK 2021 : 15th International Virtual Conference on Energy Storage (Ljubljana, Slovenia - En ligne, June 09-11, 2021).

Lalonde, Timothé, Haillot, Didier et Monfet, Danielle. 2021. « Calibration of a detailed greenhouse model with realistic controls in TRNSYS and proposition of a humidity control strategy ». In eSIM 2021 : Building Simulation Meets (Building Data) a Global Pandemic (Vancouver, BC, Canada - En ligne, June 14-16, 2021)

Piché, P., Gibout, S., Arrabie, C. et Haillot, D.. 2021. « Stockage thermique adapté à la serriculture Nordique : Retour d’expérience ». Affiche numéro 15 présentée lors de la conférence : 8ième Séminaire du LabEx DRIIHM = Labex DRIIHM Annual Symposium (Toulouse, France, Sept. 06-08, 2021).

Talbot, Marie-Hélène, Monfet, Danielle, Lalonde, Timothé et Haillot, Didier. 2021. « Impact of modelling thermal phenomena in a high-density controlled environment agriculture (CEA-HD) space ». In Building Simulation 2021 Conference (BS) (Bruges, Belgium, Sept. 01-03, 2021)

Hallé, Stéphane

Abattan, Spéro Franck, Lavoué, Jérôme, Hallé, Stéphane, Bahloul, Ali, Drolet, Daniel et Debia, Maximilien. 2021. « Modeling occupational exposure to solvent vapors using the Two-Zone (near-field/far-field) model: A literature review ». Journal of Occupational and Environmental Hygiene, vol. 18, nº 2. pp. 51-64.

Douzi, Wafa, Dugué, Benoit, Theurot, Dimitri, Vinches, Ludwig, Hallé, Stéphane et Dupuy, Olivier. 2021. « Cooling during exercise may induce benefits linked to improved brain perfusion ». International Journal of Sports Medicine, vol. 42, nº 02. pp. 122-131.

Zemzem, Mohamed, Vinches, Ludwig et Hallé, Stéphane. 2021. « Exposition des travailleurs aux particules ultrafines et aux composés organiques volatils émis lors d’un processus d’impression 3D : État des lieux au Québec ». Coll. « Rapports scientifiques », vol. R-1122. Montréal : Institut de recherche Robert-Sauvé en santé et en sécurité du travail. 65 p.

Zemzem, Mohamed, Vinches, Ludwig et Hallé, Stéphane. 2021. « Molecular sorption and diffusion of organic solvents through maleated rubber/layered silicate nanocomposites ». Journal of Elastomers and Plastics.
(In press)

Hof, Lucas

Delpla, Victor, Kenné, Jean-Pierre et Hof, Lucas A.. 2021. « Circular manufacturing 4.0: Towards internet of things embedded closed-loop supply chains ». The International Journal of Advanced Manufacturing Technology.
(In press)

Delpla, Victor, Kenné, Jean-Pierre, Maloum Fall, Ameth, Balalpour, Mahan et Hof, Lucas A.. 2021. « Metal scrap recycling 4.0: Towards smart operation and production of high-quality alloys ». In Canadian Society for Mechanical Engineering International Congress (2021) (Charlottetown, PE, Canada, June 28-30, 2021) Coll. « Progress in Canadian Mechanical Engineering », vol. 4. Charlottetown, P.E.I. : University of Prince Edward Island. Robertson Library.

Hof, Lucas Abia et Wuthrich, Rolf. 2021. « Glass precision micro-cutting using spark assisted chemical engraving ». Advances in Industrial and Manufacturing Engineering.
(In press)

Leclair, Jean-Philippe, Borges, Newton, Cree, Duncan et Hof, Lucas A.. 2021. « Towards circular manufacturing: Repurposing eggshell waste as filler for poly lactic acid feedstock for 3D printing ». In Canadian Society for Mechanical Engineering International Congress (2021) (Charlottetown, PE, Canada, June 28-30, 2021) Coll. « Progress in Canadian Mechanical Engineering », vol. 4. Charlottetown, P.E.I. : University of Prince Edward Island. Robertson Library.

Mejía-Moncayo, Camilo, Kenné, Jean-Pierre et Hof, Lucas A.. 2021. « A hybrid architecture for a reconfigurable cellular remanufacturing system ». In Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems : IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2021, Proceedings, Part I (Nantes, France, Sept. 05-09, 2021) Coll. « IFIP Advances in Information and Communication Technology », vol. 631. pp. 488-496. Springer.

Nadeau, S., Bruder, R. et Hof, L.. 2021. « Using Smart Glasses in assembly/disassembly: Current state of the art ». Travail et Santé.
(In press)

Profili, Jacopo, Brunet, Rafael, Dubois, Émilie L., Groenhuis, Vincent et Hof, Lucas A.. 2021. « Use of 3D printed connectors to redesign full face snorkeling masks in the COVID-19 era: A preliminary technical case-study ». Annals of 3D Printed Medicine, vol. 3.

Profili, Jacopo, Dubois, Emilie L., Karakitsos, Dimitrios et Hof, Lucas A.. 2021. « Overview of the user experience for snorkeling mask designs during the COVID-19 pandemic ». Healthcare, vol. 9, nº 2.

Iordanova, Ivanka

Belzile, Bruno, Wanang-Siyapdjie, Tatiana, Karimi, Sina, Gomes Braga, Rafael, Iordanova, Ivanka et St-Onge, David. 2021. « From safety standards to safe operation with mobile robotic systems deployment ». In Workshop on Design, Learning, and control for safe human-robot collaboration at the International Conference on Advanced Robotics (ICAR) (Ljubljana, Slovenia - En ligne, Dec. 07, 2021)

Karimi, Sina, Iordanova, Ivanka et St-Onge, David. 2021. « Ontology-based approach to data exchanges for robot navigation on construction sites ». Journal of Information Technology in Construction, vol. 26. pp. 546-565.

Jahazi, Mohammad

Arkhazloo, Nima Bohlooli, Bazdidi-Tehrani, Farzad, Jadidi, Mohammad, Morin, Jean-Benoit et Jahazi, Mohammad. 2021. « Determination of temperature distribution during heat treatment of forgings: Simulation and experiment ». Heat Transfer Engineering.
(In press)

Bohlooli Arkhazloo, Nima, Bazdidi-Tehrani, Farzad, Morin, Jean-Benoît et Jahazi, Mohammad. 2021. « Optimization of furnace residence time and loading pattern during heat treatment of large size forgings ». International Journal of Advanced Manufacturing Technology, vol. 113, nº 9-10. pp. 2447-2460.

Bouissa, Yassine, Zorgani, Muftah, Shahriari, Davood, Champliaud, Henri, Morin, Jean-Benoît et Jahazi, Mohammad. 2021. « Microstructure-based FEM modeling of phase transformation during quenching of large-size steel forgings ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 52, nº 5. pp. 1883-1900.

Chadha, K., Aranas, C. et Jahazi, M.. 2021. « Effect of double hit hot deformation on the evolution of dynamically transformed ferrite ». Metals and Materials International, vol. 27, nº 11. pp. 4307-4321.

Dourandish, S., Jahazi, M., Ebrahimi, G. R. et Ebacher, L.. 2021. « Influence of eutectic phase precipitation on cracking susceptibility during forging of a martensitic stainless steel for turbine shaft applications ». Journal of Materials Research and Technology, vol. 13. pp. 260-270.

Dupont-Marillia, Frederic, Jahazi, Mohammad et Belanger, Pierre. 2021. « Phased array probe for the inspection of large steel forgings ». Cogent Engineering, vol. 8, nº 1.

Eres-Castellanos, Adriana, Hidalgo, Javier, Zorgani, Muftah, Jahazi, Mohammad, Toda-Caraballo, Isaac, Caballero, Francisca G. et Garcia-Mateo, Carlos. 2021. « Assessing the scale contributing factors of three carbide-free bainitic steels: A complementary theoretical and experimental approach ». Materials & Design, vol. 197.

Fayed, Eslam M., Saadati, Mohammad, Shahriari, Davood, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun. 2021. « Effect of homogenization and solution treatments time on the elevated-temperature mechanical behavior of Inconel 718 fabricated by laser powder bed fusion ». Scientific Reports, vol. 11, nº 1.

Fayed, Eslam M., Saadati, Mohammad, Shahriari, Davood, Brailovski, Vladimir, Jahazi, Mohammad et Medraj, Mamoun. 2021. « Optimization of the post-process heat treatment of inconel 718 superalloy fabricated by laser powder bed fusion process ». Metals, vol. 11, nº 1.

Feujofack Kemda, B. V., Barka, N., Jahazi, M. et Osmani, D.. 2021. « Modeling of phase transformation kinetics in resistance spot welding and investigation of effect of post weld heat treatment on weld microstructure ». Metals and Materials International, vol. 27. pp. 1205-1223.
Compte des citations dans Scopus : 1.

Feujofack Kemda, B. V., Barka, N., Jahazi, M. et Osmani, D.. 2021. « Multi-objective optimization of process parameters in resistance spot welding of A36 mild steel and hot dipped galvanized steel sheets using non-dominated sorting genetic algorithm ». Metals and Materials International.
(In press)

Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad. 2021. « 3D FE modeling and experimental analysis of residual stresses and machining characteristics induced by dry, MQL, and wet turning of AA6061-T6 ». Machining Science and Technology, vol. 25, nº 6. pp. 957-983.

Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad. 2021. « Analysis and optimization of surface roughness in turning of AA6061-T6 under various environments and parameters ». In 9th CIRP Conference on High Performance Cutting (En ligne, May 24-26, 2021) Coll. « Procedia CIRP », vol. 101. pp. 17-20. Elsevier.

Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad. 2021. « Low and high speed orthogonal cutting of AA6061-T6 under dry and flood-coolant modes: Tool wear and residual stress measurements and predictions ». Materials, vol. 14, nº 15.

Liu, J. H., Binot, N., Delagnes, D. et Jahazi, M.. 2021. « Influence of the cooling rate below Ms on the martensitic transformation in a low alloy medium-carbon steel ». Journal of Materials Research and Technology, vol. 12. pp. 234-242.

Loucif, Abdelhalim, Morin, Jean Benoit, Lapierre-Boire, Louis Philippe et Jahazi, Mohammad. 2021. « Subsurface crack initiation and propagation in an open dieforged high strength steel: A microstructural analysis ». In 9th International Conference on Engineering and Innovative Materials (ICEIM 2020) (Singapor, Singapor, Sept. 4-6, 2020) Coll. « Key Engineering Materials », vol. 880. pp. 29-34. Trans Tech Publications Ltd.

Masoumi Khalilabad, Mahdi, Zedan, Yasser, Texier, Damien, Jahazi, Mohammad et Bocher, Philippe. 2021. « Effect of heat treatments on microstructural and mechanical characteristics of dissimilar friction stir welded 2198/2024 aluminum alloys ». Journal of Adhesion Science and Technology.
(In press)

Nikbakht, Roghayeh, Saadati, Mohammad, Kim, Taek-Soo, Jahazi, Mohammad, Kim, Hyoung Seop et Jodoin, Bertrand. 2021. « Cold spray deposition characteristic and bonding of CrMnCoFeNi high entropy alloy ». Surface & Coatings Technology, vol. 425.

Tabaie, Seyedmohammad, Rezai-Aria, Farhad, Flipo, Bertrand C. D., Cormier, Jonathan et Jahazi, Mohammad. 2021. « Post-weld heat treatment of additively manufactured inconel 718 welded to forged ni-based superalloy AD730 by linear friction welding ». Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 52, nº 8. pp. 3475-3488.

Tabaie, Seyedmohammad, Rézaï-Aria, Farhad, Flipo, Bertrand C. D. et Jahazi, Mohammad. 2021. « Grain size and misorientation evolution in linear friction welding of additively manufactured IN718 to forged superalloy AD730™ ». Materials Characterization, vol. 171. pp. 419-431.

Zorgani, M., Garcia-Mateo, C. et Jahazi, M.. 2021. « Effects of ausforming temperature on carbide-free bainite transformation and its correlation to the transformation plasticity strain in a medium C- Si-rich steel ». Materials Characterization, vol. 176.

Zorgani, M., Garcia-Mateo, C. et Jahazi, M.. 2021. « Microstructural evolution during tempering of an ausformed carbide-free low temperature bainitic steel ». Materials and Design, vol. 210.

Kaddoum, Georges

Rathee, Geetanjali, Garg, Sahil, Kaddoum, Georges, Wu, Yulei, Jayakody, Dushantha Nalin K. et Alamri, Atif. 2021. « ANN assisted-IoT enabled COVID-19 patient monitoring ». IEEE Access, vol. 9. pp. 42483-42492.

Kenné, Jean-Pierre

Delpla, Victor, Kenné, Jean-Pierre et Hof, Lucas A.. 2021. « Circular manufacturing 4.0: Towards internet of things embedded closed-loop supply chains ». The International Journal of Advanced Manufacturing Technology.
(In press)

Delpla, Victor, Kenné, Jean-Pierre, Maloum Fall, Ameth, Balalpour, Mahan et Hof, Lucas A.. 2021. « Metal scrap recycling 4.0: Towards smart operation and production of high-quality alloys ». In Canadian Society for Mechanical Engineering International Congress (2021) (Charlottetown, PE, Canada, June 28-30, 2021) Coll. « Progress in Canadian Mechanical Engineering », vol. 4. Charlottetown, P.E.I. : University of Prince Edward Island. Robertson Library.

Mejía-Moncayo, Camilo, Kenné, Jean-Pierre et Hof, Lucas A.. 2021. « A hybrid architecture for a reconfigurable cellular remanufacturing system ». In Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems : IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2021, Proceedings, Part I (Nantes, France, Sept. 05-09, 2021) Coll. « IFIP Advances in Information and Communication Technology », vol. 631. pp. 488-496. Springer.

Olufayo, Oluwole, Songmene, Victor, Kenné, Jean-Pierre et Ayomoh, Michael. 2021. « Modelling for cost and productivity optimisation in sustainable manufacturing: a case of dry versus wet machining of mould steels ». International Journal of Production Research, vol. 59, nº 17. pp. 5352-5371.

Polotski, Vladmir, Gharbi, Ali et Kenne, Jean-Pierre. 2021. « Production control of unreliable manufacturing systems with perishable inventory ». International Journal of Advanced Manufacturing Technology.
(In press)

Rivera-Gómez, Héctor, Gharbi, Ali, Kenné, Jean-Pierre, Ortiz-Zarco, Ruth et Corona-Armenta, José Ramón. 2021. « Joint production, inspection and maintenance control policies for deteriorating system under quality constraint ». Journal of Manufacturing Systems, vol. 60. pp. 585-607.

Tehrani, Mahdi Mohammadi, Mobin, Mohammadsadegh, Beauregard, Yvan, Rioux, Michel et Kenné, Jean Pierre. 2021. « Multi-scenario and multi-criteria approach to evaluate prediction techniques used to recognise failure patterns ». International Journal of Applied Decision Sciences (IJADS), vol. 14, nº 4. pp. 361-386.

Lalonde, Sébastien

Guilbault, Raynald et Lalonde, Sébastien. 2021. « Tip relief designed to optimize contact fatigue life of spur gears using adapted PSO and firefly algorithms ». SN Applied Sciences, vol. 3, nº 1.

Omrani, Amine, Langlois, Sebastien, Van Dyke, Pierre, Lalonde, Sebastien, Karganroudi, Sasan Sattarpanah et Dieng, Lamine. 2021. « Fretting fatigue life assessment of overhead conductors using a clamp/conductor numerical model and biaxial fretting fatigue tests on individual wires ». Fatigue and Fracture of Engineering Materials and Structures, vol. 44, nº 6. pp. 1498-1514.

Lamarche, Louis

Giordano, Nicolo, Lamarche, Louis et Raymond, Jasmin. 2021. « Evaluation of subsurface heat capacity through oscillatory thermal response tests ». Energies, vol. 14, nº 18.

Lamarche, Louis. 2021. « Analytic models and effective resistances for coaxial ground heat exchangers ». Geothermics, vol. 97.

Raymond, Jasmin, Vélez Marquez, Maria Isabel, Blessent, Daniela, Lamarche, Louis, Gosselin, Louis, Rouleau, Jean, Philippe, Mikael, Therrien, René et Malo, Michel. 2021. « Ten years of thermal response tests with heating cables ». In Proceedings World Geothermal Congress 2020+1 (Reykjavik, Iceland, May 21-26, 2021)

Zinsalo, Joël M., Lamarche, Louis et Raymond, Jasmin. 2021. « Design and optimization of multiple wells layout for electricity generation in a multi-fracture enhanced geothermal system ». Sustainable Energy Technologies and Assessments, vol. 47.

Zinsalo, Joël M., Lamarche, Louis et Raymond, Jasmin. 2021. « Sustainable electricity generation from an Enhanced Geothermal System considering reservoir heterogeneity and water losses with a discrete fractures model ». Applied Thermal Engineering, vol. 192.

Laporte, Catherine

Gupta, Shreyank, Haiat, Guillame, Laporte, Catherine et Belanger, Pierre. 2021. « Effect of the acoustic impedance mismatch at the bone-soft tissue interface as a function of frequency in transcranial ultrasound: A simulation and in-vitro experimental study ». IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 68, nº 5. pp. 1653-1663.

Lemaire, Romain

Lemaire, Romain, Le Corre, Gwénolé et Nakouri, Mehdi. 2021. « Predicting the propensity to soot of hydrocarbons and oxygenated molecules by means of structural group contribution factors derived from the processing of unified sooting indexes ». Fuel, vol. 302.

Lemaire, Romain et Menanteau, S.. 2021. « Modeling laser-induced incandescence of Diesel soot—Implementation of an advanced parameterization procedure applied to a refined LII model accounting for shielding effect and multiple scattering within aggregates for αT and E(m) assessment ». Applied Physics B: Lasers and Optics, vol. 127, nº 10.

Menanteau, Sébastien et Lemaire, Romain. 2021. « Modeling laser-induced incandescence of soot particles produced in a premixed CH4/O2/N2 flat flame ». In Proceedings of the 8th International Conference on Fluid Flow, Heat and Mass Transfer (FFHMT’21) (Niagara Falls, ON, Canada, May 21-23, 2021) International ASET Inc..

Lerouge, Sophie

Adoungotchodo, A., Epure, L. M., Mwale, F. et Lerouge, S.. 2021. « Chitosan-based hydrogels supplemented with gelatine and Link N enhance extracellular matrix deposition by encapsulated cells in a degenerative intervertebral disc environment ». European Cells & Materials, vol. 40. pp. 471-484.

Bouchet, Mélusine, Ajji, Abdellah et Lerouge, Sophie. 2021. « Determination of the adhesion between electrospun mats through peel tests ». Fibers and Polymers, vol. 22, nº 5. pp. 1266-1273.

Guyot, Capucine, Adoungotchodo, Atma, Taillades, Werner, Cerruti, Marta et Lerouge, Sophie. 2021. « A catechol-chitosan-based adhesive and injectable hydrogel resistant to oxidation and compatible with cell therapy ». Journal of Materials Chemistry B, vol. 9, nº 40. pp. 8406-8416.

Guyot, Capucine, Cerruti, Marta et Lerouge, Sophie. 2021. « Injectable, strong and bioadhesive catechol-chitosan hydrogels physically crosslinked using sodium bicarbonate ». Materials Science and Engineering C, vol. 118.

Rahimnejad, Maedeh, Labonte-Dupuis, Thierry, Demarquette, Nicole R. et Lerouge, Sophie. 2021. « A rheological approach to assess the printability of thermosensitive chitosan-based biomaterial inks ». Biomedical Materials, vol. 16, nº 1.

Touani, Francesco K., Borie, Melanie, Azzi, Feryel, Trudel, Dominique, Noiseux, Nicolas, Der Sarkissian, Shant et Lerouge, Sophie. 2021. « Pharmacological preconditioning improves the viability and proangiogenic paracrine function of hydrogel-encapsulated mesenchymal stromal cells ». Stem Cells International, vol. 2021.

Liu, Zhaoheng

Do, Thanh-Trung, Vu, Viet-Hung et Liu, Zhaoheng. 2021. « Symbolic differentiation algorithm for inverse dynamics of serial robots with flexible joints ». Journal of Mechanisms and Robotics, vol. 13, nº 6.

Pham, Minh-Nha, Hazel, Bruce, Hamelin, Philippe et Liu, Zhaoheng. 2021. « Vibration control of flexible joint robots using a discrete-time two-stage controller based on time-varying input shaping and delay compensation ». Journal of Dynamic Systems Measurement and Control, vol. 143, nº 10.

Lê, Van Ngan

Ahmid, Ali, Dao, Thien-My et Le, Ngan Van. 2021. « Enhanced hyper-cube framework ant colony optimization for combinatorial optimization problems ». Algorithms, vol. 14, nº 10.

Brodeur, Samuel, Le, Van Ngan et Champliaud, Henri. 2021. « A nonlinear finite-element analysis tool to prevent rupture of power transformer tank ». Sustainability, vol. 13, nº 3.

Monfet, Danielle

Haillot, Didier, Piche, Paul, Sajot, Edgar, Arrabie, Cedric, Monfet, Danielle et Gibout, Stéphane. 2021. « Developing northern greenhouses : An experimental and numerical studies ». Communication lors de la conférence : ENERSTOCK 2021 : 15th International Virtual Conference on Energy Storage (Ljubljana, Slovenia - En ligne, June 09-11, 2021).

Lalonde, Timothé, Haillot, Didier et Monfet, Danielle. 2021. « Calibration of a detailed greenhouse model with realistic controls in TRNSYS and proposition of a humidity control strategy ». In eSIM 2021 : Building Simulation Meets (Building Data) a Global Pandemic (Vancouver, BC, Canada - En ligne, June 14-16, 2021)

Talbot, Marie-Hélène, Monfet, Danielle, Lalonde, Timothé et Haillot, Didier. 2021. « Impact of modelling thermal phenomena in a high-density controlled environment agriculture (CEA-HD) space ». In Building Simulation 2021 Conference (BS) (Bruges, Belgium, Sept. 01-03, 2021)

Moosavi-Khoonsari, Elmira

Yin, Tiantian, Lee, Jaesung, Moosavi-Khoonsari, Elmira et Jung, In-Ho. 2021. « Critical evaluation and the thermodynamic optimization of the Sn-O system ». Ceramics International.
(In press)

Morency, François

Cantin, Sébastien, Chouak, Mohamed, Morency, François et Garnier, François. 2021. « Eulerian–Lagrangian CFD-microphysics modeling of a near-field contrail from a realistic turbofan ». International Journal of Engine Research.
(In press)

Ernez, Sami et Morency, François. 2021. « CFD model for aircraft ground deicing: Verification and validation of an extended enthalpy-porosity technique in particulate two phase flows ». Fluids, vol. 6, nº 6.

Ignatowicz, Kevin, Morency, François et Beaugendre, Héloïse. 2021. « Extension of SU2 CFD capabilities to 3D aircraft icing simulation ». In Proceedings of the 29th Annual Conference of the Computational Fluid Dynamics Society of Canada (CFDSC2021) (En ligne, July 27-29, 2021)

Ignatowicz, Kevin, Morency, François et Beaugendre, Héloïse. 2021. « Sensitivity of the convective heat transfer coefficient to the uncertain surface roughness characteristics ». In 55th 3AF International Conference on Applied Aerodynamics : AERO2020 (Poitiers, France - En ligne, Apr. 12-14, 2021) Association Aéronautique et Astronautique de France (3AF).

Ignatowicz, Kevin, Morency, François et Beaugendre, Héloïse. 2021. « Sensitivity study of ice accretion simulation to roughness thermal correction model ». Aerospace, vol. 8, nº 3.

Le Floch, T., Nadeau, S., Morency, F. et Landau, K.. 2021. « Identification of physically fatiguing tasks performed during aircraft open-basket ground de-icing activities ». Work : A Journal of Prevention, Assessment & Rehabilitation, vol. 68, nº 3. pp. 789-796.

Salazar, Oliverio E. Velazquez, Morency, François et Weiss, Julien. 2021. « Predicting maximum lift coefficient for compound wings using lifting line theory ». Journal of Aircraft, vol. 58, nº 4. pp. 717-732.

Samad, Abdallah, Tagawa, Gitsuzo B. S., Rajabi Khamesi, Rasoul, Morency, François et Volat, Christophe. 2021. « Frossling number assessment for airfoil under fully turbulent flow conditions ». Journal of Thermophysics and Heat Transfer.
(In press)

Samad, Abdallah, Villeneuve, Eric, Blackburn, Caroline, Morency, François et Volat, Christophe. 2021. « An experimental investigation of the convective heat transfer on a small helicopter rotor with anti-icing and de-icing test setups ». Aerospace, vol. 8, nº 4.

Samad, Abdallah, Villeneuve, Eric, Morency, François et Volat, Christophe. 2021. « A numerical and experimental investigation of the convective heat transfer on a small helicopter rotor test setup ». Aerospace, vol. 8, nº 2.

Tagawa, Gitsuzo B.S., Morency, François et Beaugendre, Héloïse. 2021. « CFD investigation on the maximum lift coefficient degradation of rough airfoils ». AIMS Energy, vol. 9, nº 2. pp. 305-325.

Moustapha, Hany

Ibrahem, Ibrahem M. A., Akhrif, Ouassima, Moustapha, Hany et Staniszewski, Martin. 2021. « Nonlinear generalized predictive controller based on ensemble of NARX models for industrial gas turbine engine ». Energy, vol. 230.

Ibrahem, Ibrahem Mohamed, Akhrif, Ouassima, Moustapha, Hany et Staniszewski, Martin. 2021. « An ensemble of recurrent neural networks for real time performance modelling of three-spool aero-derivative gas turbine engine ». Journal of Engineering for Gas Turbines and Power, vol. 143, nº 10.

Nadeau, Sylvie

Landau, Kurt, Nadeau, Sylvie, Salmanzadeh, Hamed et Abendroth, Bettina. 2021. « „Große Arbeitsobjekte“ in Flugzeugbau und -wartung ». In Herbstkonferenz der Gesellschaft für Arbeitswissenschaft : Zeitbezug und Transformation – Ergonomie im Wandel des Fortschritts (Friedrichshafen, Germany, Sept. 23-24, 2021) Dortmund : GFA Press.

Le Floch, T., Nadeau, S., Morency, F. et Landau, K.. 2021. « Identification of physically fatiguing tasks performed during aircraft open-basket ground de-icing activities ». Work : A Journal of Prevention, Assessment & Rehabilitation, vol. 68, nº 3. pp. 789-796.

Mofidi Naeini, A. et Nadeau, S.. 2021. « Data gloves in manufacturing, a review of OHS and operational concerns ». Communication lors de la conférence : 42e Congrès AQHSST : Unir la diversité pour une culture en santé (En ligne, 5 mai 2021).

Mofidi Naeini, Alimeh et Nadeau, Sylvie. 2021. « FRAM and STAMP new avenue for risk analysis of manufacturing in the context of industry 4.0 ». In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Bochum, Germany, Mar. 03-05, 2021) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 67. Dortmund : GfA-Press.

Nadeau, S., Bruder, R. et Hof, L.. 2021. « Using Smart Glasses in assembly/disassembly: Current state of the art ». Travail et Santé.
(In press)

Nadeau, Sylvie. 2021. « Acceptabilité sociale ou pratique? De quoi parle-t-on? ». Travail et Santé, vol. 37, nº 1. p. 21.

Slim, Hussein et Nadeau, Sylvie. 2021. « The application of Rough Sets Theory as a data-mining tool to classify complex functions in safety management ». In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Bochum, Germany, Mar. 03-05, 2021) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 67. Dortmund : GfA-Press.

Tiaya Tedonchio, Christian, Nadeau, Sylvie, Boton, Conrad et Rivest, Louis. 2021. « BIM and PLM-based management of occupational health and safety: A comparative literature review ». In Proceedings of the 38th International Conference of CIB W78 (Luxembourg, Oct. 13-15, 2021) pp. 892-901.

Torres, Yaniel, Nadeau, Sylvie et Landau, Kurt. 2021. « Application of SHERPA (Systematic Human Error Reduction and Prediction Approach) as an alternative to predict and prevent human error in manual assembly ». In Proceedings of the 21st Congress of the International Ergonomics Association (IEA 2021). IEA 2021 : Volume III: Sector Based Ergonomics (Vancouver, BC, Canada, June 13-18, 2021) Coll. « Lecture Notes in Networks and Systems », vol. 221. pp. 445-453. Cham : Springer.

Torres, Yaniel, Nadeau, Sylvie et Landau, Kurt. 2021. « Classification and quantification of human error in manufacturing: A case study in complex manual assembly ». Applied Sciences, vol. 11, nº 2.

Torres, Yaniel, Nadeau, Sylvie et Landau, Kurt. 2021. « Evaluation of fatigue and workload among workers conducting complex manual assembly in manufacturing ». IISE Transactions on Occupational Ergonomics and Human Factors, vol. 9, nº 1. pp. 49-63.

Torres, Yaniel, Nadeau, Sylvie et Landau, Kurt. 2021. « Evaluation of shift work scheduling and overtime allocation practices using the HSE Fatigue Index: application on complex manual assembly ». In Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Bochum, Germany, Mar. 03-05, 2021) Coll. « Kongress der Gesellschaft für Arbeitswissenschaft », vol. 67. Dortmund : GfA-Press.

Ngô, Anh Dung

Tran, Dinh Son, Songmene, Victor et Ngo, Anh Dung. 2021. « Regression and ANFIS-based models for predicting of surface roughness and thrust force during drilling of biocomposites ». Neural Computing and Applications.
(In press)

Venditti, Tony, Tran, Nguyen Duy Phuong et Ngo, Anh Dung. 2021. « System safety analysis of industrial processes using fuzzy methodology ». In Analysis of Socio-Economic Conditions: Insights from a Fuzzy Multi-dimensional Approach. pp. 239-255. London ; New York : Routledge.

Paquet, Marc

Zaabar, Imen, Arango-Miranda, Raul, Beauregard, Yvan et Paquet, Marc. 2021. « A sustainable multicriteria decision framework for obsolescence resolution strategy selection ». Sustainability, vol. 13, nº 15.

Petit, Yvan

Constant, Caroline, Braïlovski, Vladimir, Wagnac, Éric, Petit, Yvan, Desrochers, André et Nichols, Sylvain. 2021. « Biomechanical evaluation of bovine stifles stabilized with an innovative braided superelastic nitinol prosthesis after transection of the cranial cruciate ligament ». Veterinary Surgery.
(In press)

Duncan, Olly, Bailly, Nicolas, Allen, Tom, Petit, Yvan, Wagnac, Eric et Alderson, Andrew. 2021. « Effect of compressive strain rate on auxetic foam ». Applied Sciences, vol. 11, nº 3.

Evin, Morgane, Sudres, Patrice, Weber, Pascal, Godio-Raboutet, Yves, Arnoux, Pierre-Jean, Wagnac, Eric, Petit, Yvan et Tillier, Yannick. 2021. « Experimental Bi-axial tensile tests of spinal meningeal tissues and constitutive models comparison ». Acta Biomaterialia.
(In press)

Guillaume, Florian, Le Cann, Sophie, Tengattini, Alessandro, Tornquist, Elin, Falentin-Daudre, Céline, Lomami, Hugues Albini, Petit, Yvan, Isaksson, Hanna et Haiat, Guillaume. 2021. « Neutron microtomography to investigate the bone-implant interface-comparison with histological analysis ». Physics in Medicine & Biology, vol. 66, nº 10.

Lecoublet, Brieg, Petit, Yvan, Wagnac, Eric, Boisclair, Dominic et Arnoux, Pierre-Jean. 2021. « Neck braces and driving posture affect neck mobility on powered two-wheelers ». Promet-Traffic & Transportation, vol. 33, nº 3. pp. 337-345.

Mac-Thiong, Jean-Marc, Richard-Denis, Andréane, Petit, Yvan, Bernard, Francis, Barthélemy, Dorothy, Dionne, Antoine et Magnuson, David S. K.. 2021. « Protocol for rapid onset of mobilisation in patients with traumatic spinal cord injury (PROMPT-SCI) study: A single-arm proof-of-concept trial of early in-bed leg cycling following acute traumatic spinal cord injury ». BMJ Open, vol. 11, nº 11.

Mishra, Satyendra Kumar, Mac-Thiong, Jean-Marc, Wagnac, Eric, Petit, Yvan et Ung, Bora. 2021. « A sensitive and fast fiber bragg grating-based investigation of the biomechanical dynamics of in vitro spinal cord injuries ». Sensors, vol. 21, nº 5.

Sudres, Patrice, Evin, Morgane, Wagnac, Eric, Bailly, Nicolas, Diotalevi, Lucien, Melot, Anthony, Arnoux, Pierre-Jean et Petit, Yvan. 2021. « Tensile mechanical properties of the cervical, thoracic and lumbar porcine spinal meninges ». Journal of the Mechanical Behavior of Biomedical Materials, vol. 115.

Rioux, Michel

Tehrani, Mahdi Mohammadi, Mobin, Mohammadsadegh, Beauregard, Yvan, Rioux, Michel et Kenné, Jean Pierre. 2021. « Multi-scenario and multi-criteria approach to evaluate prediction techniques used to recognise failure patterns ». International Journal of Applied Decision Sciences (IJADS), vol. 14, nº 4. pp. 361-386.

Rivest, Louis

Tiaya Tedonchio, Christian, Nadeau, Sylvie, Boton, Conrad et Rivest, Louis. 2021. « BIM and PLM-based management of occupational health and safety: A comparative literature review ». In Proceedings of the 38th International Conference of CIB W78 (Luxembourg, Oct. 13-15, 2021) pp. 892-901.

Rousse, Daniel R.

Arras, Wassila et Rousse, Daniel R.. 7 June 2021. « Transformer des déchets organiques en biogaz ». [Research article]. Substance ÉTS.

Arras, Wassila et Rousse, Daniel R.. 7 June 2021. « Turning Organic Waste Into Biogas ». [Research article]. Substance ÉTS.

Giordano, N., Piché, P., Gibout, S., Haillot, D., Arrabie, C., Lamalice, A., Rousse, D. R., Py, X. et Raymond, J.. 2021. « Daily and seasonal heat storage for greenhouse food production in Nunavik (Canadian Arctic) ». In Proceedings World Geothermal Congress 2020+1 (Reykjavik, Iceland, May 21-26, 2021)

Gualteros, Sergio et Rousse, Daniel R.. 2021. « Solar water pumping systems: A tool to assist in sizing and optimization ». Solar Energy, vol. 225. pp. 382-398.

Promis, Geoffrey, Douzane, Omar, Rousse, Daniel R. et Langlet, Thierry. 2021. « An innovative system for the treatment of rising dampness in buildings located in cold climates ». Energies, vol. 14, nº 12.

Verhaeghe, Edouard, Benhamza, Sam et Rousse, Daniel R.. 5 April 2021. « Augmenter l’autonomie des véhicules électriques basse vitesse ». [Research article]. Substance ÉTS.

Verhaeghe, Edouard, Benhamza, Sam et Rousse, Daniel R.. 5 April 2021. « Increasing the Range of Low-Speed Electric Vehicles ». [Research article]. Substance ÉTS.

Sanjosé, Marlène

Grasso, Gabriele, Wu, Hao, Orestano, Susanna, Sanjosé, Marlène, Moreau, Stéphane et Roger, Michel. 2021. « CFD-based prediction of wall-pressure spectra under a turbulent boundary layer with adverse pressure gradient ». CEAS Aeronautical Journal, vol. 12. pp. 125-133.

Koch, Régis, Sanjosé, Marlène et Moreau, Stéphane. 2021. « Aerodynamic investigation of a linear cascade with tip gap using large-eddy simulation ». Journal of the Global Power and Propulsion Society, vol. 5. pp. 39-49.

Koch, Régis, Sanjosé, Marlène et Moreau, Stéphane. 2021. « Large-Eddy simulation of a single airfoil tip-leakage flow ». AIAA Journal, vol. 59, nº 7. pp. 2546-2557.

Lewis, Danny, de Laborderie, Jérôme, Sanjosé, Marlène, Moreau, Stéphane, Jacob, Marc C. et Masson, Vianney. 2021. « Parametric study on state-of-the-art analytical models for fan broadband interaction noise predictions ». Journal of Sound and Vibration, vol. 514.

Sanjose, Marlene, Hub, Sandra, Lörcher, Frieder et Moreau, Stéphane. 2021. « Noise mechanisms in a radial fan without volute ». In 18th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC18), 23-26 November 2020 (online) (En ligne, Nov. 23-26, 2020) Coll. « Journal of Physics: Conference Series », vol. 1909. IOP Publishing Ltd.

Seers, Patrice

Henry-Lheureux, Thomas, Seers, Patrice, Ghedhaïfi, Weeded et Garnier, François. 2021. « Overview of emissions at Montreal’s Pierre Elliott Trudeau international airport and impact of local weather on related pollutant concentrations ». Water, Air, and Soil Pollution, vol. 232, nº 5.

Songmene, Victor

Bahri, Haithem, Songmene, Victor, Kouam, Jules, Samuel, Agnes Marie et Samuel, Fawzy Hosny. 2021. « CNC edge finishing of granite: Effect of machining conditions on part quality, cutting forces, and particle emissions ». Materials, vol. 14, nº 21.

Elgnemi, Tarek, Songmene, Victor, Kouam, Jules, Jun, Martin B. G. et Samuel, Agnes Marie. 2021. « Experimental investigation on dry routing of CFRP composite: Temperature, forces, tool wear, and fine dust emission ». Materials, vol. 14, nº 19.

Elgnemi, Tarek-Shaban-Mohamed, Jun, Martin Byung-Guk, Songmene, Victor et Samuel, Agnes Marie. 2021. « Milling performance of CFRP composite and atomised vegetable oil as a function of fiber orientation ». Materials, vol. 14, nº 8.

Hernandez-Sandoval, J., Zedan, Y., Songmene, V., Abdelaziz, M. H., Samuel, F. H. et Garza-Elizondo, G. H.. 2021. « Effect of minor addition of Ni and Zr on the high-temperature performance of Al-Si-Cu-Mg cast alloys ». International journal of metalcasting.
(In press)

Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad. 2021. « 3D FE modeling and experimental analysis of residual stresses and machining characteristics induced by dry, MQL, and wet turning of AA6061-T6 ». Machining Science and Technology, vol. 25, nº 6. pp. 957-983.

Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad. 2021. « Analysis and optimization of surface roughness in turning of AA6061-T6 under various environments and parameters ». In 9th CIRP Conference on High Performance Cutting (En ligne, May 24-26, 2021) Coll. « Procedia CIRP », vol. 101. pp. 17-20. Elsevier.

Javidikia, Mahshad, Sadeghifar, Morteza, Songmene, Victor et Jahazi, Mohammad. 2021. « Low and high speed orthogonal cutting of AA6061-T6 under dry and flood-coolant modes: Tool wear and residual stress measurements and predictions ». Materials, vol. 14, nº 15.

Mahmoud, M. G., Zedan, Y., Samuel, A. M., Doty, H. W., Songmene, V. et Samuel, F. H.. 2021. « Effect of rare earth metals (Ce and La) addition on the performance of Al-Si-Cu-Mg Cast Alloys ». International Journal of Metalcasting.
(In press)

Mahmoud, M. G., Zedan, Y., Samuel, A. M., Songmene, V. et Samuel, F. H.. 2021. « The use of rare earth metals in AlSiCu casting alloys ». International Journal of Metalcasting.
(In press)

Marani, Mohsen, Zeinali, Mohammadjavad, Songmene, Victor et Mechefske, Chris K.. 2021. « Tool wear prediction in high-speed turning of a steel alloy using long short-term memory modelling ». Measurement: Journal of the International Measurement Confederation, vol. 177. pp. 704-713.

Mohamed-Amine, Alliche, Mohamed, Djennane, Abdelhakim, Djebara et Songmene, Victor. 2021. « Predictive analytical modeling of thermo-mechanical effects in orthogonal machining ». Materials, vol. 14, nº 24.

Olufayo, Oluwole, Songmene, Victor, Kenné, Jean-Pierre et Ayomoh, Michael. 2021. « Modelling for cost and productivity optimisation in sustainable manufacturing: a case of dry versus wet machining of mould steels ». International Journal of Production Research, vol. 59, nº 17. pp. 5352-5371.

Salem, S., Hamed, M., Zedan, Y., Samuel, A. M., Doty, H. W., Songmene, V. et Samuel, F. H.. 2021. « Evolution and methods of residual stresses measurement in Al-Si-Cu-Mg Castings : Role of heat treatment ». International Journal of Metalcasting.
(In press)

Samuel, A. M., Zedan, Y., Doty, H. W., Songmene, V. et Samuel, F. H.. 2021. « Role of the addition of la and ce on the cooling characteristics and porosity formation in A356 and A413 alloys ». International Journal of Metalcasting.
(In press)

Samuel, Agnes, Zedan, Yasser, Doty, Herbert, Songmene, Victor et Samuel, Fawzy H.. 2021. « A review study on the main sources of porosity in Al-Si cast alloys ». Advances in Materials Science and Engineering, vol. 2021.

Tran, Dinh Son, Songmene, Victor et Ngo, Anh Dung. 2021. « Regression and ANFIS-based models for predicting of surface roughness and thrust force during drilling of biocomposites ». Neural Computing and Applications.
(In press)

Zedan, Yasser, Jabbari, Keyhan, Niknam, Seyed A. et Songmene, Victor. 2021. « Machinability study of AA6061 under various heat treatment conditions ». Iranian Journal of Science and Technology - Transactions of Mechanical Engineering, vol. 45. pp. 543-553.

Soulaïmani, Azzeddine

Abdedou, Azzedine et Soulaïmani, Azzeddine. 2021. « A non-intrusive reduced-order modeling for uncertainty propagation of time-dependent problems using a B-splines Bézier elements-based method and proper orthogonal decomposition: Application to dam-break flows ». Computers and Mathematics with Applications, vol. 102. pp. 187-205.

Amouzou, Gildas Yaovi et Soulaïmani, Azzeddine. 2021. « Numerical algorithms for elastoplacity: Finite elements code development and implementation of the mohr–coulomb law ». Applied Sciences, vol. 11, nº 10.

Das, Rajeev et Soulaimani, Azzedine. 2021. « Non-deterministic methods and surrogates in the design of rockfill dams ». Applied Sciences, vol. 11, nº 8.

Jacquier, Pierre, Abdedou, Azzedine, Delmas, Vincent et Soulaïmani, Azzeddine. 2021. « Non-intrusive reduced-order modeling using uncertainty-aware deep neural networks and proper orthogonal decomposition: Application to flood modeling ». Journal of Computational Physics, vol. 424.

Rousseau, Philippe Martineau, Soulaimani, Azzeddine et Sabourin, Michel. 2021. « Efficiency assessment for rehabilitated Francis turbines using URANS simulations ». Water, vol. 13, nº 14.

Shahzadi, Gullnaz et Soulaimani, Azzeddine. 2021. « Deep neural network and polynomial chaos expansion-based surrogate models for sensitivity and uncertainty propagation: An application to a rockfill dam ». Water, vol. 13, nº 13.

Zokagoa, Jean‑Marie, Soulaïmani, Azzeddine et Dupuis, Pierre. 2021. « Flood risk mapping using uncertainty propagation analysis on a peak discharge: case study of the Mille Iles River in Quebec ». Natural Hazards.
(In press)

St-Onge, David

Belzile, Bruno, Wanang-Siyapdjie, Tatiana, Karimi, Sina, Gomes Braga, Rafael, Iordanova, Ivanka et St-Onge, David. 2021. « From safety standards to safe operation with mobile robotic systems deployment ». In Workshop on Design, Learning, and control for safe human-robot collaboration at the International Conference on Advanced Robotics (ICAR) (Ljubljana, Slovenia - En ligne, Dec. 07, 2021)

Boucher, Corentin, Gomes Braga, Rafael, Salas Gordoniz, Jorge E., Anguiozar, Nerea Urrestilla, Zohour, Hamed Montazer, Duval, Alexandre et St-Onge, David. 2021. « Conveying information with groups of robots through expressive motion ». Affiche présentée lors de la conférence : Workshop on Robot Swarms in the Real World at ICRA 2021 (En ligne, June 4, 2021).

Cao, Yanjun, Chen, Chao, St-Onge, David et Beltrame, Giovanni. 2021. « Distributed TDMA for mobile UWB network localization ». IEEE Internet of Things Journal, vol. 8, nº 17. pp. 13449-13464.

Karimi, Sina, Iordanova, Ivanka et St-Onge, David. 2021. « Ontology-based approach to data exchanges for robot navigation on construction sites ». Journal of Information Technology in Construction, vol. 26. pp. 546-565.

Panerati, Jacopo, Ramtoula, Benjamin, St-Onge, David, Cao, Yanjun, Kaufmann, Marcel, Cowley, Aidan, Sabattini, Lorenzo et Beltrame, Giovanni. 2021. « On the communication requirementsof decentralized connectivity control: A field experiment ». In The 15th International Symposium on Distributed Autonomous Robotic Systems (En ligne, June 01-04, 2021)

Salas Gordoniz, Jorge Esteban, Reeves, Nicolas et St-Onge, David. 2021. « Modular foldable airship concept for subterranean exploration ». In ASME 2021 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE) (En ligne, Aug. 17-20, 2021) The American Society of Mechanical Engineers.

Tahan, Antoine

Amor, Sabrine Ben, Zongo, Floriane, Louhichi, Borhen, Brailovski, Vladimir et Tahan, Antoine. 2021. « Classification of dimensional deviation in additive manufacturing LPBF process for AlSi10Mg alloy according to ISO 286 and ANSI B4.2 ». In 41st Computers and Information in Engineering Conference, CIE 2021, Held as Part of the ASME 2021 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC-CIE 2021 (En ligne, Aug. 17-19, 2021) American Society of Mechanical Engineers (ASME).

Chatenet, Q., Remy, E., Gagnon, M., Fouladirad, M. et Tahan, A. S.. 2021. « Modeling cavitation erosion using non-homogeneous gamma process ». Reliability Engineering and System Safety, vol. 213.

Chatenet, Quentin, Tahan, Antoine S., Fouladirad, Mitra, Gagnon, Martin et Remy, Emmanuel. 2021. « Maintenance strategies comparison for francis turbine runner subjected to cavitation ». Sustainability, vol. 13, nº 19.

Danouj, B., Tahan, S. A., David, E. et Lotfi, M.. 2021. « Partial discharges location in power transformers using piezoceramic sensors ». International Journal of Electrical and Computer Engineering, vol. 11, nº 3. pp. 1942-1950.

Dollon, Q., Antoni, J., Tahan, A., Gagnon, M. et Monette, C.. 2021. « Operational Modal Analysis of hydroelectric turbines using an order based likelihood approach ». Renewable Energy, vol. 165. pp. 799-811.

Dollon, Q., Monette, C., Gagnon, M., Tahan, A. et Antoni, J.. 2021. « Calibration of critical speed predictions using experimental measurements ». In 30th IAHR Symposium on Hydraulic Machinery and Systems (IAHR) (Lausanne, Switzerland, Mar. 21-26, 2021) Coll. « IOP Conference Series: Earth and Environmental Science », vol. 774. UK : IOP Publishing.

Pham, Quang Hung, Gagnon, Martin, Antoni, Jérôme, Tahan, Antoine et Monette, Christine. 2021. « Rainflow-counting matrix interpolation over different operating conditions for hydroelectric turbine fatigue assessment ». Renewable Energy, vol. 172. pp. 465-476.

Proteau, Antoine, Tahan, Antoine, Zemouri, Ryad et Thomas, Marc. 2021. « Predicting the quality of a machined workpiece with a variational autoencoder approach ». Journal of Intelligent Manufacturing.
(In press)

Quang Hung, Pham, Gagnon, Martin, Antoni, Jérôme, Tahan, Antoine et Monette, Christine. 2021. « A proposal for the dynamic strain interpolation on hydroelectric turbine runner ». In 30th IAHR Symposium on Hydraulic Machinery and Systems (IAHR) (Lausanne, Switzerland, Mar. 21-26, 2021) Coll. « IOP Conference Series: Earth and Environmental Science », vol. 774. UK : IOP Publishing.

Toews, Matthew

Chapon, Arthur, Pereira, Daniel, Toews, Matthew et Belanger, Pierre. 2021. « Deconvolution of ultrasonic signals using a convolutional neural network ». Ultrasonics, vol. 111.

Ung, Bora

Mishra, Satyendra Kumar, Mac-Thiong, Jean-Marc, Wagnac, Eric, Petit, Yvan et Ung, Bora. 2021. « A sensitive and fast fiber bragg grating-based investigation of the biomechanical dynamics of in vitro spinal cord injuries ». Sensors, vol. 21, nº 5.

Viens, Martin

Bajgholi, Mohammad Ebrahim, Rousseau, Gilles, Viens, Martin et Thibault, Denis. 2021. « Capability of advanced ultrasonic inspection technologies for hydraulic turbine runners ». Applied Sciences, vol. 11, nº 10.

Voix, Jérémie

Benesch, Danielle, Bouserhal, Rachel E., Blain-Moraes, Stefanie et Voix, Jérémie. 2021. « Managing auditory sensitivities in autism: The potential of smart hearing protection ». Communication lors de la conférence : National Hearing Conservation Association (NHCA) annual conference (En ligne, Feb. 21, 2021).

Bernier, Antoine, Bouserhal, Rachel E., Voix, Jérémie et Herzog, Philippe. 2021. « Design and assessment of an active musician's hearing protection device with occlusion effect reduction ». Journal of the Audio Engineering Society, vol. 69, nº 9. pp. 618-631.

Chabot, Philippe, Bouserhal, Rachel E., Cardinal, Patrick et Voix, Jérémie. 2021. « Detection and classification of human-produced nonverbal audio events ». Applied Acoustics, vol. 171.

Colombier, Arthur, Hocine, Chahinez, Sgard, Franck, Doutres, Olivier et Voix, Jérémie. 2021. « Hearing protectors fit-testing: Modeling validation and measurements on manikin of earmuff instrumentation ». Communication lors de la conférence : National Hearing Conservation Association (NHCA) annual conference (En ligne, Feb. 21, 2021).

Demuynck, Michel, Delnavaz, Aidin et Voix, Jérémie. 2021. « Human temporomandibular joint motion: A synthesis approach for designing a six-bar kinematic simulator ». Communication lors de la conférence : 21st Biennial Meeting of the Canadian Society for Biomechanics (CSB-SCB 2020/2021) (Montreal, QC, Canada, May 25, 2021).

Demuynck, Michel, Delnavaz, Aidin et Voix, Jérémie. 2021. « Human temporomandibular joint motion: A synthesis approach for designing a six-bar kinematic simulator ». Journal of Mechanisms and Robotics, vol. 13, nº 6.

Einig, Lucas, Dumoulin, Romain, Cossette, Isabelle et Voix, Jérémie. 2021. « Hearing-care platform : A smartphone-based awareness and hearing conservation program for music students ». In Advances in Acoustics, Noise and Vibration 2021 : Proceedings of the 27th International Congress on Sound and Vibration (ICSV 2021) (En ligne, July 11-16, 2021) Gliwice, Poland : Silesian University Press.

Guilbeault-Sauvé, Alex, De Kelper, Bruno et Voix, Jérémie. 2021. « Man down situation detection using an in-ear inertial platform ». Sensors, vol. 21, nº 5.

Nadon, Vincent, Bonnet, Fabien, Bouserhal, Rachel E., Bernier, Antoine et Voix, Jérémie. 2021. « Method for protected noise exposure level assessment under an in-ear hearing protection device: a pilot study ». International Journal of Audiology, vol. 60, nº 1. pp. 60-69.

Valentin, Olivier, Viallet, Guilhem, Delnavaz, Aidin, Cretot-Richert, Gabrielle, Ducharme, Mikaël, Monsarat-Chanon, Hami et Voix, Jérémie. 2021. « Custom-fitted in- and around-the-ear sensors for unobtrusive and on-the-go EEG acquisitions: Development and validation ». Sensors, vol. 21, nº 9.

Voix, Jérémie. 2021. « Hearables and in-ear technologies roadmap unveiled: Can we end noise-induced hearing loss in workers? ». Communication lors de la conférence : SAC Audiology Event (Speech-Language & Audiology Canada) (Montreal, QC, Canada, May 28, 2021).

Wagnac, Éric

Constant, Caroline, Braïlovski, Vladimir, Wagnac, Éric, Petit, Yvan, Desrochers, André et Nichols, Sylvain. 2021. « Biomechanical evaluation of bovine stifles stabilized with an innovative braided superelastic nitinol prosthesis after transection of the cranial cruciate ligament ». Veterinary Surgery.
(In press)

Corbin-Berrigan, Laurie-Ann, Wagnac, Éric, Vinet, Sophie-Andrée, Charlebois-Plante, Camille, Guay, Samuel et De Beaumont, Louis. 2021. « Head impacts in Canadian varsity football: An exploratory study ». Concussion, vol. 6, nº 3.

Duncan, Olly, Bailly, Nicolas, Allen, Tom, Petit, Yvan, Wagnac, Eric et Alderson, Andrew. 2021. « Effect of compressive strain rate on auxetic foam ». Applied Sciences, vol. 11, nº 3.

Evin, Morgane, Sudres, Patrice, Weber, Pascal, Godio-Raboutet, Yves, Arnoux, Pierre-Jean, Wagnac, Eric, Petit, Yvan et Tillier, Yannick. 2021. « Experimental Bi-axial tensile tests of spinal meningeal tissues and constitutive models comparison ». Acta Biomaterialia.
(In press)

Lecoublet, Brieg, Petit, Yvan, Wagnac, Eric, Boisclair, Dominic et Arnoux, Pierre-Jean. 2021. « Neck braces and driving posture affect neck mobility on powered two-wheelers ». Promet-Traffic & Transportation, vol. 33, nº 3. pp. 337-345.

Mishra, Satyendra Kumar, Mac-Thiong, Jean-Marc, Wagnac, Eric, Petit, Yvan et Ung, Bora. 2021. « A sensitive and fast fiber bragg grating-based investigation of the biomechanical dynamics of in vitro spinal cord injuries ». Sensors, vol. 21, nº 5.

Sudres, Patrice, Evin, Morgane, Wagnac, Eric, Bailly, Nicolas, Diotalevi, Lucien, Melot, Anthony, Arnoux, Pierre-Jean et Petit, Yvan. 2021. « Tensile mechanical properties of the cervical, thoracic and lumbar porcine spinal meninges ». Journal of the Mechanical Behavior of Biomedical Materials, vol. 115.

Xu, Huiyang, Sgard, Franck, Carillo, Kévin, Wagnac, Éric et de Guise, Jacques. 2021. « Simulation of the objective occlusion effect induced by bone-conducted stimulation using a three-dimensional finite-element model of a human head ». Journal of the Acoustical Society of America, vol. 150, nº 5. pp. 4018-4030.

Weiss, Julien

Mohammed-Taifour, Abdelouahab et Weiss, Julien. 2021. « Periodic forcing of a large turbulent separation bubble ». Journal of Fluid Mechanics, vol. 915.

Salazar, Oliverio E. Velazquez, Morency, François et Weiss, Julien. 2021. « Predicting maximum lift coefficient for compound wings using lifting line theory ». Journal of Aircraft, vol. 58, nº 4. pp. 717-732.

Zednik, Ricardo

Azzaz, Cherif M., Mattoso, Luiz H. C., Demarquette, Nicole R. et Zednik, Ricardo J.. 2021. « Polyvinylidene fluoride nanofibers obtained by electrospinning and blowspinning: Electrospinning enhances the piezoelectric β‐phase myth or reality? ». Journal of Applied Polymer Science, vol. 138, nº 10.

Moulins, Anthony, Dugnani, Roberto et Zednik, Ricardo J.. 2021. « Fracture surface analysis and quantitative characterization of gallium arsenide III-V semiconductors using fractography ». Engineering Failure Analysis, vol. 123.

de Guise, Jacques A.

Xu, Huiyang, Sgard, Franck, Carillo, Kévin, Wagnac, Éric et de Guise, Jacques. 2021. « Simulation of the objective occlusion effect induced by bone-conducted stimulation using a three-dimensional finite-element model of a human head ». Journal of the Acoustical Society of America, vol. 150, nº 5. pp. 4018-4030.

This list was generated on Wed Jan 19 01:41:20 2022 EST.