| A showcase of ÉTS researchers’ publications and other contributions |
| FRANÇAIS |
List of publications of "Brailovski, Vladimir"Number of items: 342. Peer reviewed article published in a journal
Baril, Yannick and Brailovski, Vladimir.
2010.
« Fatigue properties of superelastic Ti-Ni filaments and braided cables for bone fixation ».
Journal of Biomedical Materials Research - Part B Applied Biomaterials, vol. 92B, nº 2.
pp. 489-498.
Chartrand, M., Brailovski, Vladimir and Baril, Yannick.
2010.
« Test bench and methodology for sternal closure system testing ».
Experimental Techniques, vol. 34, nº 3.
pp. 45-53.
Coutu, Daniel, Brailovski, Vladimir and Terriault, Patrick.
2010.
« Optimized design of an active extrados structure for an experimental morphing laminar wing ».
Aerospace Science and Technology, vol. 14, nº 7.
pp. 451-458.
Prokoshkin, S. D., Brailovski, Vladimir, Korotitskiy, A. V., Inaekyan, K. E. and Glezer, A. M..
2010.
« Specific features of the formation of the microstructure of titanium nickelide upon thermomechanical treatment including cold plastic deformation to degrees from moderate to severe ».
Physics of Metals and Metallography, vol. 110, nº 3.
pp. 289-303.
Demers, V., Brailovski, Vladimir, Prokoshkin, S. D. and Inaekyan, K. E..
2009.
« Thermomechanical fatigue of nanostructured Ti-Ni shape memory alloys ».
Materials Science and Engineering: A, vol. 513-514.
pp. 185-196.
Demers, V., Brailovski, Vladimir, Prokoshkin, S. D. and Inaekyan, K. E..
2009.
« Optimization of the cold rolling processing for continuous manufacturing of nanostructured Ti-Ni shape memory alloys ».
Journal of Materials Processing Technology, vol. 209, nº 6.
pp. 3096-3105.
Georges, Thomas, Brailovski, Vladimir, Morellon, Emeric, Coutu, Daniel and Terriault, Patrick.
2009.
« Design of shape memory alloy actuators for morphing laminar wing with flexible extrados ».
Journal of Mechanical Design, vol. 131, nº 9.
0910061-0910069.
Inaekyan, K. E., Brailovski, Vladimir, Prokoshkin, S. D., Korotitskiy, A. V. and Glezer, A. M..
2009.
« Characterization of amorphous and nanocrystalline Ti-Ni-based shape memory alloys ».
Journal of Alloys and Compounds, vol. 473, nº 1-2.
pp. 71-78.
Khmelevskaya, I. Yu, Prokoshkin, S. D., Trubitsyna, I. B., Belousov, M. N., Dobatkin, S. V., Tatyanin, E. V., Korotitskiy, A. V., Brailovski, Vladimir, Stolyarov, V. V. and Prokofiev, E. A..
2008.
« Structure and properties of Ti-Ni-based alloys after equal-channel angular pressing and high-pressure torsion ».
Materials Science and Engineering: A, vol. 481-482.
pp. 119-122.
Paradis, A., Terriault, Patrick and Brailovski, Vladimir.
2009.
« Modeling of residual strain accumulation of NiTi shape memory alloys under uniaxial cyclic loading ».
Computational Materials Science, vol. 47, nº 2.
pp. 373-383.
Paradis, A., Terriault, Patrick, Brailovski, Vladimir and Torra, V..
2008.
« On the partial recovery of residual strain accumulated during an interrupted cyclic loading of NiTi shape memory alloys ».
Smart Materials and Structures, vol. 17, nº 6.
Prokoshkin, S. D., Brailovski, Vladimir, Inaekyan, K. E., Demers, V., Khmelevskaya, I. Yu, Dobatkin, S. V. and Tatyanin, E. V..
2008.
« Structure and properties of severely cold-rolled and annealed Ti-Ni shape memory alloys ».
[Conference paper]. Materials Science and Engineering: A, vol. 481-482.
pp. 114-118.
Prokoshkin, S., Brailovski, Vladimir, Khmelevskaya, I., Dobatkin, S., Inaekyan, K., Turilina, V., Demers, V. and Tat'yanin, E..
2005.
« Creation of substructure and nanostructure in thermomechanical treatment and control on functional properties of Ti-Ni alloys with shape memory effect ».
Metal Science and Heat Treatment, vol. 47, nº 5-6.
pp. 182-187.
Prokoshkin, S. D., Brailovski, Vladimir, Khmelevskaya, I. Yu, Dobatkin, S. V., Inaekyan, K. E., Demers, V., Bastarache, E. and Tatianin, E. V..
2006.
« Formation of nanocrystalline structure upon severe rolling plastic deformation and annealing and improvement of set of functional properties of Ti-Ni alloys ».
Bulletin of the Russian Academy of Sciences : Physics, vol. 70, nº 9.
pp. 1536-1541.
Prokoshkin, S. D., Korotitskiy, A. V., Tamonov, A. V., Khmelevskaya, I. Yu, Brailovski, Vladimir and Turenne, S..
2006.
« Comparative X-ray and time-of-flight neutron diffraction studies of martensite crystal lattice in stressed and unstressed binary Ti-Ni alloys ».
Materials Science and Engineering: A, vol. 438-440.
pp. 549-552.
Scalzo, O., Turenne, S., Gauthier, M. and Brailovski, Vladimir.
2009.
« Mechanical and microstructural characterization of porous NiTi shape memory alloys ».
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 40A, nº 9.
pp. 2061-2070.
Terriault, Patrick, Viens, F. and Brailovski, Vladimir.
2006.
« Non-isothermal finite element modeling of a shape memory alloy actuator using ANSYS ».
Computational Materials Science, vol. 36, nº 4.
pp. 397-410.
Theriault, Philippe, Terriault, Patrick, Brailovski, Vladimir and Gallo, Richard.
2006.
« Finite element modeling of a progressively expanding shape memory stent ».
Journal of Biomechanics, vol. 39, nº 15.
pp. 2837-2844.
Vachon, Pierre-Luc, Brailovski, Vladimir and Terriault, Patrick.
2009.
« Modeling of delamination initiation and propagation in composite laminates under monotonic tensile loading using the progressive damage modeling technique ».
Science and Engineering of Composite Materials, vol. 16, nº 2.
pp. 99-114.
Coutu, Daniel, Brailovski, Vladimir and Terriault, Patrick.
2009.
« Promising benefits of an active-extrados morphing laminar wing ».
Journal of Aircraft, vol. 46, nº 2.
pp. 730-731.
Brailovski, Vladimir, Prokoshkin, S. D., Khmelevskaya, I. Yu, Inaekyan, K. E., Demers, V., Bastarache, E., Dobatkin, S. V. and Tatyanin, E. V..
2006.
« Interrelations between the properties and structure of thermomechanically-treated equiatomic Ti-Ni alloy ».
Materials Science and Engineering: A, vol. 438-440.
pp. 597-601.
Brailovski, Vladimir, Prokoshkin, Sergui D., Khmelevskaya, Irina Yu., Inaekyan, Karine E., Demers, Vincent, Dobatkin, Sergui V. and Tatyanin, Evgeny V..
2006.
« Structure and properties of the Ti–50.0 at%Ni alloy after strain hardening and nanocrystallizing thermomechanical processing ».
Materials Transactions, vol. 47, nº 3.
pp. 795-804.
Baril, Yannick, Brailovski, Vladimir, Chartrand, M., Terriault, Patrick and Cartier, R..
2009.
« Median sternotomy : comparative testing of braided superelastic and monofilament stainless steel sternal sutures ».
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol. 223, nº H3.
pp. 363-374.
Brailovski, Vladimir, Terriault, Patrick and Prokoshkin, Sergei.
2002.
« Influence of the post-deformation annealing heat treatment on the low-cycle fatigue of NiTi shape memory alloys ».
Journal of Materials Engineering and Performance, vol. 11, nº 6.
pp. 614-621.
Crampon, M. A., Brailovski, Vladimir, Sawan, M. and Trochu, F..
2002.
« Nerve cuff electrode with shape memory alloy armature : design and fabrication ».
Bio-Medical Materials and Engineering, vol. 12, nº 4.
pp. 397-410.
Prokoshkin, S. D., Khmelevskaya, I. Y., Brailovski, Vladimir, Trochu, F., Turenne, S. and Turilina, V. Y. U..
2004.
« Thermomechanical treatments and their influence on the microstructure and stress/strain diagrams of NiTi shape memory alloys ».
Canadian Metallurgical Quarterly, vol. 43, nº 1.
pp. 95-108.
Prokoshkin, S. D., Khmelevskaya, I. Y., Brailovski, Vladimir, Trochu, F. and Turilina, V. Y..
2001.
« Structure features, phase content and strain diagram parameters of Ti-Ni shape memory alloys after LTMT and post-deformation heating ».
Metallofizika I Noveishie Tekhnologii, vol. 23.
pp. 26-32.
Prokoshkin, S. D., Korotitskiy, A. V., Brailovski, Vladimir, Turenne, S., Khmelevskaya, I. Yu and Trubitsyna, I. B..
2004.
« On the lattice parameters of phases in binary Ti-Ni shape memory alloys ».
Acta Materialia, vol. 52, nº 15.
pp. 4479-4492.
Coutu, Daniel, Brailovski, Vladimir, Terriault, Patrick, Mamou, Mahmoud and Mébarki, Youssef.
2011.
« Aerostructural model for morphing laminar wing optimization in a wind tunnel ».
Journal of Aircraft, vol. 48, nº 1.
pp. 66-76.
Terriault, Patrick and Brailovski, Vladimir.
2011.
« Modeling of shape memory alloy actuators using Likhachev's formulation ».
Journal of Intelligent Material Systems and Structures, vol. 22, nº 4.
pp. 353-368.
Dubinskiy, S. M., Prokoshkin, S. D., Brailovski, Vladimir, Inaekyan, K. E., Korotitskiy, A. V., Filonov, M. R. and Petrzhik, M. I..
2011.
« Structure formation during thermomechanical processing of Ti-Nb-(Zr, Ta) alloys and the manifestation of the shape-memory effect ».
Physics of Metals and Metallography, vol. 112, nº 5.
pp. 503-516.
Prokoshkin, S. D., Korotitskiy, A. V., Brailovski, Vladimir, Inaekyan, K. E. and Dubinskiy, S. M..
2011.
« Crystal lattice of martensite and the reserve of recoverable strain of thermally and thermomechanically treated Ti-Ni shape- Memory alloys ».
Physics of Metals and Metallography, vol. 112, nº 2.
pp. 170-187.
Georges, T., Brailovski, Vladimir and Terriault, Patrick.
2013.
« Experimental bench for shape memory alloys actuators design and testing ».
Experimental Techniques, vol. 37, nº 6.
pp. 24-33.
Baril, Y., Bourgeois, Y., Brailovski, V., Duke, K., Laflamme, G. Y. and Petit, Y..
2012.
« Testing system for the comparative evaluation of greater Trochanter re-attachment devices ».
Experimental Techniques, vol. 36, nº 4.
pp. 74-82.
Georges, T., Brailovski, V. and Terriault, P..
2012.
« Characterization and design of antagonistic shape memory alloy actuators ».
Smart Materials and Structures, vol. 21, nº 3.
Coutu, Daniel, Brailovski, Vladimir, Terriault, Patrick, Mamou, Mahmoud, Mébarki, Youssef and Laurendeau, Éric.
2011.
« Lift-to-drag ratio and laminar flow control of a morphing laminar wing in a wind tunnel ».
Smart Materials and Structures, vol. 20, nº 3.
Brailovski, Vladimir, Prokoshkin, S. D., Gauthier, M., Inaekyan, K. E., Dubinskiy, S., Petrzhik, M. and Filonov, M. R..
2011.
« Bulk and porous metastable beta Ti-Nb-Zr(Ta) alloys for biomedical applications ».
Materials Science and Engineering: C, vol. 31, nº 3.
pp. 643-657.
Facchinello, Yann, Brailovski, Vladimir, Prokoshkin, Sergey D., Georges, Thomas and Dubinskiy, Sergey M..
2012.
« Manufacturing of nanostructured Ti-Ni shape memory alloys by means of cold/warm rolling and annealing thermal treatment ».
Journal of Materials Processing Technology, vol. 212, nº 11.
pp. 2294-2304.
Brailovski, Vladimir, Prokoshkin, S. D., Inaekyan, K. E. and Demers, V..
2011.
« Functional properties of nanocrystalline, submicrocrystalline and polygonized Ti-Ni alloys processed by cold rolling and post-deformation annealing ».
Journal of Alloys and Compounds, vol. 509, nº 5.
pp. 2066-2075.
Prokoshkin, S. D., Tyurenn, S., Khmelevskaya, I. Yu, Brailovski, Vladimir and Troshyu, F..
2000.
« X-ray diffraction study of a high-temperature shape-memory effect in titanium nickelide ».
Physics of Metals and Metallography, vol. 90, nº 2.
pp. 128-33.
Prokoshkin, S. D., Khmelevskaya, I. Yu, Brailovski, Vladimir, Trosho, F. and Turilina, V. Yu.
2001.
« Structure and deformation diagrams of Ti-Ni alloys subjected to a low-temperature thermomechanical treatment with postdeformation heating ».
Physics of Metals and Metallography, vol. 91, nº 4.
pp. 423-31.
Prokoshkin, S. D., Brailovski, Vladimir, Turenne, S., Khmelevskaya, I. Yu, Korotitskii, A. V. and Trubitsyna, I. B..
2003.
« On the lattice parameters of the B19' martensite in binary Ti-Ni shape-memory alloys ».
Physics of Metals and Metallography, vol. 96, nº 1.
pp. 55-64.
Volkov, O., Trochu, F., Brailovski, Vladimir, Sacepe, N. and Terriault, Patrick.
1999.
« Material law for NITI shape memory alloys based on dual kriging interpolation ».
Journal of the Mechanical Behavior of Materials, vol. 10, nº 4.
pp. 215-226.
Brailovski, Vladimir, Khmelevskaya, I. Y., Prokoshkin, S. D., Pushin, V. G., Ryklina, E. P. and Valiev, R. Z..
2004.
« Foundations of heat and thermomechanical treatments and their effect on the structure and properties of titanium nickelide-based alloys ».
[Review]. Physics of Metals and Metallography, vol. 97, nº Suppl. 1.
S3-S55.
Turenne, S., Prokoshkin, S., Brailovski, Vladimir and Sacépé, N..
2000.
« Mechanical and X-ray characterisation of the assisted two-way shape memory effect in NiTi ».
Canadian Metallurgical Quarterly, vol. 39, nº 2.
pp. 217-224.
Facchinello, Yann, Brailovski, Vladimir, Inaekyan, Karina, Petit, Yvan and Mac-Thiong, Jean-Marc.
2013.
« Manufacturing of monolithic superelastic rods with variable properties for spinal correction: Feasibility study ».
Journal of the Mechanical Behavior of Biomedical Materials, vol. 22.
pp. 1-11.
Maitrejean, Guillaume, Terriault, Patrick and Brailovski, Vladimir.
2013.
« Density dependence of the superelastic behavior of porous shape memory alloys: Representative Volume Element and scaling relation approaches ».
Computational Materials Science, vol. 77.
pp. 93-101.
Sheremet'Ev, V. A., Dubinskii, S. M., Zhukova, Yu S., Brailovski, Vladimir, Petrzhik, M. I., Prokoshkin, S. D., Pustov, Yu A. and Filonov, M. R..
2013.
« Mechanical and electrochemical characteristics of thermomechanically treated superelastic Ti-Nb-(Ta, Zr) alloys ».
Metal Science and Heat Treatment, vol. 55, nº 1-2.
pp. 100-108.
Vachon, Pierre-Luc, Brailovski, Vladimir and Terriault, Patrick.
2013.
« Impact-induced damage and damage propagation under flexural load in TiNi and Kevlar-stitched carbon/epoxy laminates ».
Composite Structures, vol. 100.
pp. 424-435.
Vachon, Pierre-Luc, Brailovski, Vladimir and Terriault, Patrick.
2013.
« Prediction of the propagation of impact-induced delamination in carbon/epoxy laminates ».
Composite Structures, vol. 95.
pp. 227-235.
Dubinskiy, S., Prokoshkin, S., Brailovski, Vladimir, Inaekyan, K. and Korotitskiy, A..
2014.
« In situ X-ray diffraction strain-controlled study of Ti-Nb-Zr and Ti-Nb-Ta shape memory alloys: Crystal lattice and transformation features ».
Materials Characterization, vol. 88.
pp. 127-142.
Ould-Brahim, Nazim, Bouzid, Abdel-Hakim and Brailovski, Vladimir.
2013.
« On the use of shape memory alloy studs to recover load loss in bolted joints ».
Journal of Pressure Vessel Technology, vol. 135, nº 2.
Prokoshkin, S. D., Turenne, S., Khmelevskaya, I. Yu, Brailovski, Vladimir and Trochu, F..
2000.
« Structural mechanisms of high-temperature shape changes in titanium-nickel alloys after Low-Temperature Thermomechanical Treatment ».
Canadian Metallurgical Quarterly, vol. 39, nº 2.
pp. 225-234.
Dubinskiy, S., Brailovski, Vladimir, Prokoshkin, S., Pushin, V., Inaekyan, K., Sheremetyev, V., Petrzhik, M. and Filonov, M..
2013.
« Structure and Properties of Ti-19.7Nb-5.8Ta Shape Memory Alloy Subjected to Thermomechanical Processing Including Aging ».
Journal of Materials Engineering and Performance, vol. 22, nº 9.
pp. 2656-2664.
Ménard, Jérémie, Émard, Maxime, Canet, Fanny, Brailovski, Vladimir, Petit, Yvan and Laflamme, George Y..
2013.
« Initial tension loss in cerclage cables ».
The Journal of Arthroplasty, vol. 28, nº 9.
pp. 1509-1512.
Baril, Yannick, Bourgeois, Yan, Brailovski, Vladimir, Duke, Kajsa, Laflamme, G. Yves and Petit, Yvan.
2013.
« Improving greater trochanteric reattachment with a novel cable plate system ».
Medical Engineering and Physics, vol. 35, nº 3.
pp. 383-391.
Rivard, J., Brailovski, V., Ferlatte, A., Petit, Yvan and Mac-Thiong, J. M..
2016.
« New methodology for comparative evaluation of the abrasive properties of orthopedic cables, cut-out reciprocal testing (CORT) ».
Experimental techniques, vol. 40, nº 1.
pp. 35-42.
Simoneau, Charles, Terriault, Patrick, Lacasse, Simon and Brailovski, Vladimir.
2014.
« Adaptive composite panel with embedded SMA actuators: Modeling and validation ».
Mechanics Based Design of Structures and Machines, vol. 42, nº 2.
pp. 174-192.
Brailovski, Vladimir, Prokoshkin, S., Gauthier, M., Inaekyan, K. and Dubinskiy, S..
2013.
« Mechanical properties of porous metastable beta Ti-Nb-Zr alloys for biomedical applications ».
Journal of Alloys and Compounds, vol. 577.
pp. 413-417.
Prokoshkin, S., Brailovski, Vladimir, Korotitskiy, A., Inaekyan, K., Dubinskiy, S., Filonov, M. and Petrzhik, M..
2013.
« Formation of nanostructures in thermomechanically-treated Ti-Ni and Ti-Nb-(Zr, Ta) SMAs and their roles in martensite crystal lattice changes and mechanical behavior ».
Journal of Alloys and Compounds, vol. 577.
pp. 418-422.
Simoneau, Charles, Terriault, Patrick, Rivard, Jonathan and Brailovski, Vladimir.
2014.
« Modeling of metallic foam morphology using the Representative Volume Element approach: Development and experimental validation ».
International Journal of Solids and Structures, vol. 51, nº 21-22.
pp. 3633-3641.
Maitrejean, Guillaume, Terriault, Patrick, Devis Capilla, Diego and Brailovski, Vladimir.
2014.
« Unit cell analysis of the superelastic behavior of open-cell tetrakaidecahedral shape memory alloy foam under quasi-static loading ».
Smart Materials Research.
p. 870649.
Facchinello, Yann, Brailovski, Vladimir, Petit, Yvan and Mac-Thiong, Jean-Marc.
2014.
« Monolithic superelastic rods with variable flexural stiffness for spinal fusion: modeling of the processing-properties relationship ».
Medical Engineering and Physics, vol. 36, nº 11.
pp. 1455-1463.
Rivard, J., Brailovski, Vladimir, Dubinskiy, S. and Prokoshkin, S..
2014.
« Fabrication, morphology and mechanical properties of Ti and metastable Ti-based alloy foams for biomedical applications ».
Materials Science and Engineering: C, vol. 45.
pp. 421-433.
Demers, V., Brailovski, Vladimir, Prokoshkin, S., Inaekyan, K., Bastarash, E., Khmelevskaya, I. and Dobatkin, S..
2006.
« Functional properties of nanostructured Ti-50.0 at % Ni alloys ».
Journal of ASTM International, vol. 3, nº 6.
Kreitcberg, A., Brailovski, Vladimir, Prokoshkin, S., Gunderov, D., Khomutov, M. and Inaekyan, K..
2015.
« Effect of the grain/subgrain size on the strain-rate sensitivity and deformability of Ti-50at%Ni alloy ».
Materials Science and Engineering A, vol. 622.
pp. 21-29.
Kreitcberg, A., Brailovski, Vladimir, Prokoshkin, S. and Inaekyan, K..
2014.
« Influence of Thermomechanical Treatment on Structure and Crack Propagation in Nanostructured Ti-50.26 at%Ni Alloy ».
Metallography, Microstructure, and Analysis, vol. 3, nº 1.
pp. 46-57.
Kreitcberg, A., Brailovski, V., Prokoshkin, S., Facchinello, Y., Inaekyan, К and Dubinskiy, S..
2013.
« Microstructure and functional fatigue of nanostructured Ti–50.26 at%Ni alloy after thermomechanical treatment with warm rolling and intermediate annealing ».
Materials Science and Engineering: A, vol. 562.
pp. 118-127.
Aidibe, Ali, Tahan, Antoine and Brailovski, Vladimir.
2016.
« Metrological investigation of a selective laser melting additive manufacturing system: A case study ».
[Conference paper]. IFAC-PapersOnLine, vol. 49, nº 31.
pp. 25-29.
Avoine, Xytilis, Lussier, Bertrand, Brailovski, Vladimir, Inaekyan, Karine and Beauchamp, Guy.
2016.
« Evaluation of the effect of 4 types of knots on the mechanical properties of 4 types of suture material used in small animal practice ».
Canadian Journal of Veterinary Research, vol. 80, nº 2.
pp. 162-170.
Baranova, Alexandra, Dubinskiy, Sergey, Konopatsky, Anton, Markova, Galina, Vvedenskaia, Irina, Prokoshkin, Sergey and Brailovski, Vladimir.
2024.
« On the mechanisms and thermocyclic stability of β → ωiso transformation in a superelastic Ti–Nb–Zr shape memory alloy ».
Shape Memory and Superelasticity.
Baranova, Alexandra, Dubinskiy, Sergey, Tabachkova, Natalia, Prokoshkin, Sergey and Brailovski, Vladimir.
2022.
« Kinetic features of the isothermal ω-phase formation in superelastic Ti-Nb-Zr alloys ».
Materials Letters, vol. 325.
Bouland, C., Urlea, V., Beaubier, K., Samoilenko, M. and Brailovski, V..
2019.
« Abrasive flow machining of laser powder bed-fused parts: numerical modeling and experimental validation ».
Journal of Materials Processing Technology, vol. 273.
Brailovski, V., Terriault, P., Prokoshkin, S., Simoneau, C., Rivard, J. and Dubinskiy, S..
2015.
« Superelastic nickel-free porous materials for load-bearing medical implants: fabrication and modeling ».
[Conference paper]. Materials Today: Proceedings, vol. 2, nº Supp. 3.
S511-S516.
Brailovski, Vladimir, Facchinello, Yann, Brummund, Martin, Petit, Yvan and Mac-Thiong, Jean-Marc.
2016.
« Ti–Ni rods with variable stiffness for spine stabilization: Manufacture and biomechanical evaluation ».
Shape Memory and Superelasticity, vol. 2, nº 1.
pp. 3-11.
Brailovski, Vladimir, Kalinicheva, Victoria, Letenneur, Morgan, Lukashevich, Konstantin, Sheremetyev, Vadim and Prokoshkin, Sergey.
2020.
« Control of density and grain structure of a laser powder bed-fused superelastic Ti-18Zr-14Nb alloy: Simulation-driven process mapping ».
Metals, vol. 10, nº 12.
Brailovski, Vladimir, Prokoshkin, Sergey, Inaekyan, Karine, Petrzhik, Mikhail, Filonov, Mikhail, Pustov, Yuriy, Dubinskiy, Sergey, Zhukova, Yulia, Korotitskiy, Andrey and Sheremetyev, Vadim.
2015.
« Thermomechanical treatment of Ti-Nb solid solution based SMA ».
Foundations of Materials Science and Engineering, vol. 81-82.
pp. 342-405.
Brika, Salah Eddine and Brailovski, Vladimir.
2023.
« A novel apparatus for the simulation of powder spreading procedures in powder-bed-based additive manufacturing processes: Design, calibration, and case study ».
Journal of Manufacturing and Materials Processing, vol. 7, nº 4.
Brika, Salah Eddine and Brailovski, Vladimir.
2020.
« Influence of Powder Particle Morphology on the Static and Fatigue Properties of Laser Powder Bed-Fused Ti-6Al-4V Components ».
Journal of Manufacturing and Materials Processing, vol. 4, nº 4.
Brika, Salah Eddine, Letenneur, Morgan, Dion, Christopher Alex and Brailovski, Vladimir.
2020.
« Influence of particle morphology and size distribution on the powder flowability and laser powder bed fusion manufacturability of Ti-6Al-4V alloy ».
Additive Manufacturing, vol. 31.
Brummund, Martin, Brailovski, Vladimir, Petit, Yvan, Facchinello, Yann and Mac-Thiong, Jean-Marc.
2017.
« Impact of anchor type on porcine lumbar biomechanics: Finite element modelling and in-vitro validation ».
Clinical Biomechanics, vol. 43.
pp. 86-94.
Brummund, Martin, Brailovski, Vladimir, Petit, Yvan, Facchinello, Yann and Mac-Thiong, Jean-Marc.
2017.
« Impact of spinal rod stiffness on porcine lumbar biomechanics: Finite element model validation and parametric study ».
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol. 231, nº 12.
pp. 1071-1080.
Constant, Caroline, Braïlovski, Vladimir, Wagnac, Éric, Petit, Yvan, Desrochers, André and Nichols, Sylvain.
2021.
« Biomechanical evaluation of bovine stifles stabilized with an innovative braided superelastic nitinol prosthesis after transection of the cranial cruciate ligament ».
Veterinary Surgery, vol. 50, nº 7.
pp. 1398-1408.
Constant, Caroline, Nichols, Sylvain, Wagnac, Éric, Petit, Yvan, Desrochers, André and Braïlovski, Vladimir.
2020.
« Biocompatibility and mechanical stability of Nitinol as biomaterial for intra-articular prosthetic devices ».
Materialia, vol. 9.
Derkach, M., Gunderov, D., Tabachkova, N., Cheverikin, V., Zolotukhin, E., Prokoshkin, S., Brailovski, V. and Sheremetyev, V..
2024.
« Effect of low and high temperature ECAP modes on the microstructure, mechanical properties and functional fatigue behavior of Ti-Zr-Nb alloy for biomedical applications ».
Journal of Alloys and Compounds, vol. 976.
Desrosiers, Catherine, Letenneur, Morgan, Bernier, Fabrice, Cheriet, Farida, Brailovski, Vladimir, Piche, Nicolas and Guibault, Francois.
2022.
« Correlative laser confocal microscopy study and multimodal 2D/3D registration as ground truth for x-ray inspection of internal defects in LPBF manufacturing ».
e-Journal of Nondestructive Testing, vol. 27, nº 3.
Desrosiers, Catherine, Letenneur, Morgan, Bernier, Fabrice, Piche, Nicolas, Provencher, Benjamin, Cheriet, Farida, Guibault, François and Brailovski, Vladimir.
2024.
« Automated porosity segmentation in laser powder bed fusion part using computed tomography: A validity study ».
Journal of Intelligent Manufacturing.
Diotalevi, Lucien, Petit, Yvan, Brailovski, Vladimir, Nichols, Sylvain, Marchionatti, Emma and Wagnac, Éric.
2018.
« Quasi-static tensile properties of the Cranial Cruciate Ligament (CrCL) in adult cattle: towards the design of a prosthetic CrCL ».
Journal of the Mechanical Behavior of Biomedical Materials, vol. 79.
pp. 239-245.
Dubinskiy, S. M., Baranova, A. P. and Brailovski, V..
2022.
« Influence of Heating and Cooling on the Isothermal β → ω Transition in Ti–22Nb–6Zr Alloy ».
Russian Journal of Non-Ferrous Metals, vol. 63, nº 6.
pp. 659-663.
Dubinskiy, S., Markova, G., Baranova, A., Vvedenskiy, V., Minkova, I., Prokoshkin, S. and Brailovski, V..
2022.
« A non-typical Elinvar effect on cooling of a beta Ti-Nb-Zr alloy ».
Materials Letters, vol. 314.
Dubinskiy, Sergey, Korotitskiy, Andrey, Prokoshkin, Sergey and Brailovski, Vladimir.
2016.
« In situ X-ray diffraction study of athermal and isothermal omega-phase crystal lattice in Ti-Nb-based shape memory alloys ».
Materials Letters, vol. 168.
pp. 155-157.
Dubinskiy, Sergey, Prokoshkin, Sergey, Sheremetyev, Vadim, Konopatsky, Anton, Korotitskiy, Andrey, Tabachkova, Natalia, Blinova, Elena, Glezer, Alexander and Brailovski, Vladimir.
2021.
« The mechanisms of stress-induced transformation in ultimately fine-grained titanium nickelide, and critical grain size for this transformation ».
Journal of Alloys and Compounds, vol. 858.
Dubois, Patrick K., Landry-Blais, Alexandre, Gazzah, Rym, Sivi, Sani, Brailovski, Vladimir and Picard, Mathieu.
2022.
« Cooling performance of additively manufactured pin fins in stacked microchannels for the inside-out ceramic turbine shroud-cooling ring ».
Journal of Turbomachinery, vol. 144, nº 7.
Dumas, Mathieu, Terriault, Patrick and Brailovski, Vladimir.
2017.
« Modelling and characterization of a porosity graded lattice structure for additively manufactured biomaterials ».
Materials and Design, vol. 121.
pp. 383-392.
Facchinello, Yann, Brailovski, Vladimir, Petit, Yvan, Brummund, Martin, Tremblay, Jaëlle and Mac-Thiong, Jean-Marc.
2015.
« Biomechanical assessment of the stabilization capacity of monolithic spinal rods with different flexural stiffness and anchoring arrangement ».
Clinical Biomechanics, vol. 30, nº 10.
pp. 1026-1035.
Fayed, Eslam M., Brailovski, Vladimir, Jahazi, Mohammad and Medraj, Mamoun.
2024.
« Effect of microwave hybrid heat treatment on the microstructure and hardness of 3D printed Inconel 718 superalloy ».
Canadian Metallurgical Quarterly, vol. 63, nº 2.
pp. 312-328.
Fayed, Eslam M., Brailovski, Vladimir, Jahazi, Mohammad and Medraj, Mamoun.
2022.
« Stability of the microstructure and elevated-temperature mechanical properties of additively manufactured Inconel 718 superalloy subjected to long-term in-service thermal cycling ».
Materials Science and Engineering: A, vol. 838.
Fayed, Eslam M., Saadati, Mohammad, Shahriari, Davood, Brailovski, Vladimir, Jahazi, Mohammad and Medraj, Mamoun.
2021.
« Effect of homogenization and solution treatments time on the elevated-temperature mechanical behavior of Inconel 718 fabricated by laser powder bed fusion ».
Scientific Reports, vol. 11, nº 1.
Fayed, Eslam M., Saadati, Mohammad, Shahriari, Davood, Brailovski, Vladimir, Jahazi, Mohammad and Medraj, Mamoun.
2021.
« Optimization of the post-process heat treatment of inconel 718 superalloy fabricated by laser powder bed fusion process ».
Metals, vol. 11, nº 1.
Fayed, Eslam M., Shahriari, Davood, Saadati, Mohammad, Brailovski, Vladimir, Jahazi, Mohammad and Medraj, Mamoun.
2020.
« Influence of homogenization and solution treatments time on the microstructure and hardness of Inconel 718 fabricated by laser powder bed fusion process ».
Materials, vol. 13, nº 11.
Hériveaux, Yoann, Le Cann, Sophie, Immel, Katharina, Vennat, Elsa, Nguyen, Vu-Hieu, Brailovski, Vladimir, Karasinski, Patrick, Sauer, Roger A. and Haïat, Guillaume.
2023.
« Debonding of coin-shaped osseointegrated implants: Coupling of experimental and numerical approaches ».
Journal of the Mechanical Behavior of Biomedical Materials, vol. 141.
Hériveaux, Yoann, Nguyen, Vu-Hieu, Brailovski, Vladimir, Gorny, Cyril and Haiat, Guillaume.
2019.
« Reflection of an ultrasonic wave on the bone-implant interface: effect of the roughness parameters ».
Journal of the Acoustical Society of America, vol. 145, nº 6.
pp. 3370-3381.
Huang, W., Causse, P., Brailovski, V., Hu, H. and Trochu, F..
2019.
« Reconstruction of mesostructural material twin models of engineering textiles based on Micro-CT Aided Geometric Modeling ».
Composites Part A: Applied Science and Manufacturing, vol. 124.
Ijaz, M. F., Dubinskiy, S., Zhukova, Y., Korobkova, A., Pustov, Y., Brailovski, V. and Prokoshkin, S..
2017.
« Novel electrochemical test bench for evaluating the functional fatigue life of biomedical alloys ».
The Journal of The Minerals, Metals & Materials Society, vol. 69, nº 8.
pp. 1334-1339.
Ijaz, M. F., Zhukova, Y., Konopatsky, A., Dubinskiy, S., Korobkova, A., Pustov, Y., Brailovski, V. and Prokoshkin, S..
2018.
« Effect of Ta addition on the electrochemical behavior and functional fatigue life of metastable Ti-Zr-Nb based alloy for indwelling implant applications ».
Journal of Alloys and Compounds, vol. 748.
pp. 51-56.
Inaekyan, K., Brailovski, Vladimir, Prokoshkin, S., Pushin, V., Dubinskiy, S. and Sheremetyev, V..
2015.
« Comparative study of structure formation and mechanical behavior of age-hardened Ti-Nb-Zr and Ti-Nb-Ta shape memory alloys ».
Materials Characterization, vol. 103.
pp. 65-74.
Inaekyan, K., Kreitcberg, A., Turenne, S. and Brailovski, V..
2019.
« Microstructure and mechanical properties of laser powder bed-fused IN625 alloy ».
Materials Science and Engineering: A, vol. 768.
Jetté, Bruno, Brailovski, Vladimir, Dumas, Mathieu, Simoneau, Charles and Terriault, Patrick.
2018.
« Femoral stem incorporating a diamond cubic lattice structure: Design, manufacture and testing ».
Journal of the Mechanical Behavior of Biomedical Materials, vol. 77.
pp. 58-72.
Jetté, Bruno, Brailovski, Vladimir, Simoneau, Charles, Dumas, Mathieu and Terriault, Patrick.
2018.
« Development and in vitro validation of a simplified numerical model for the design of a biomimetic femoral stem ».
Journal of the Mechanical Behavior of Biomedical Materials, vol. 77.
pp. 539-550.
Jimenez, Erika Herrera, Kreitcberg, Alena, Moquin, Etienne and Brailovski, Vladimir.
2022.
« Influence of post-processing conditions on the microstructure, static, and fatigue resistance of laser powder bed fused Ti-6Al-4V components ».
Journal of Manufacturing and Materials Processing, vol. 6, nº 4.
Kolobova, A. Yu, Ryklina, E. P., Prokoshkin, S. D., Inaekyan, K. E. and Brailovskii, V..
2018.
« Study of the evolution of the structure and kinetics of martensitic transformations in a titanium nickelide upon isothermal annealing after hot helical rolling ».
Physics of Metals and Metallography, vol. 119, nº 2.
pp. 134-145.
Konopatskii, A. S., Dubinskii, S. M., Zhukova, Yu S., Inaekyan, K., Brailovskii, V., Prokoshkin, S. D. and Filonov, M. R..
2019.
« Experimental Search for Chemical Compositions of Superelastic Titanium Alloys with Enhanced Functional Properties ».
Metal Science and Heat Treatment, vol. 61.
pp. 333-339.
Konopatsky, A. S., Dubinskiy, S. M., Zhukova, Yu S., Sheremetyev, V., Brailovski, V., Prokoshkin, S. D. and Filonov, M. R..
2017.
« Ternary Ti-Zr-Nb and quaternary Ti-Zr-Nb-Ta shape memory alloys for biomedical applications: Structural features and cyclic mechanical properties ».
Materials Science and Engineering: A, vol. 702.
pp. 301-311.
Konopatsky, A., Brailovski, V., Filonov, M., Dubinskiy, S., Zhukova, Y., Korotitskiy, A. and Prokoshkin, S..
2017.
« Manufacturing and characterization of novel Ti-Zr-Based shape memory alloys ».
[Conference paper]. Materials Today: Proceedings, vol. 4, nº 3.
pp. 4856-4860.
Konopatsky, A., Sheremetyev, V., Dubinskiy, S., Zhukova, Y., Firestein, K., Golberg, D., Filonov, M., Prokoshkin, S. and Brailovski, V..
2021.
« Structure and superelasticity of novel Zr-Rich Ti-ZrNb shape memory alloys ».
Shape Memory and Superelasticity, vol. 7, nº 2.
pp. 304-313.
Kreitcberg, A. Yu, Prokoshkin, S. D., Brailovski, Vladimir and Korotitskiy, A. V..
2014.
« Role of the structure and texture in the realization of the recovery strain resource of the nanostructured Ti-50.26 at %Ni alloy ».
Physics of Metals and Metallography, vol. 115, nº 9.
pp. 926-947.
Kreitcberg, A., Brailovski, V. and Prokoshkin, S..
2018.
« New biocompatible near-beta Ti-Zr-Nb alloy processed by laser powder bed fusion: Process optimization ».
Journal of Materials Processing Technology, vol. 252.
pp. 821-829.
Kreitcberg, A., Brailovski, V., Sheremetyev, V. and Prokoshkin, S..
2017.
« Effect of laser powder bed fusion parameters on the microstructure and texture development in superelastic Ti–18Zr–14Nb Alloy ».
Shape Memory and Superelasticity, vol. 3, nº 4.
pp. 361-372.
Kreitcberg, A., Sheremetyev, V., Tsaturyants, M., Prokoshkin, S. and Brailovski, V..
2019.
« Optimization of post-processing annealing conditions of the laser powder bed-fused Ti–18Zr–14Nb shape memory alloy: structure and functional properties ».
Shape Memory and Superelasticity, vol. 5, nº 2.
pp. 172-181.
Kreitcberg, Alena and Brailovski, Vladimir.
2022.
« Effect of Fe and C contents on the microstructure and high-temperature mechanical properties of IN625 alloy processed by laser powder bed fusion ».
Materials, vol. 15, nº 19.
Kreitcberg, Alena, Brailovski, Vladimir and Turenne, Sylvain.
2017.
« Effect of heat treatment and hot isostatic pressing on the microstructure and mechanical properties of Inconel 625 alloy processed by laser powder bed fusion ».
Materials Science and Engineering: A, vol. 689.
pp. 1-10.
Kreitcberg, Alena, Brailovski, Vladimir and Turenne, Sylvain.
2017.
« Elevated temperature mechanical behavior of IN625 alloy processed by laser powder-bed fusion ».
Materials Science and Engineering: A, vol. 700.
pp. 540-553.
Kreitcberg, Alena, Inaekyan, Karine, Turenne, Sylvain and Brailovski, Vladimir.
2019.
« Temperature- and time-dependent mechanical behavior of post-treated IN625 alloy processed by laser powder bed fusion ».
Journal of Manufacturing and Materials Processing, vol. 3, nº 3.
Kudryashova, A., Sheremetyev, V., Lukashevich, K., Cheverikin, V., Inaekyan, K., Galkin, S., Prokoshkin, S. and Brailovski, V..
2020.
« Effect of a combined thermomechanical treatment on the microstructure, texture and superelastic properties of Ti-18Zr-14Nb alloy for orthopedic implants ».
Journal of Alloys and Compounds, vol. 843.
p. 11.
Lacasse, Simon, Terriault, Patrick, Simoneau, Charles and Brailovski, Vladimir.
2015.
« Design, manufacturing, and testing of an adaptive composite panel with embedded shape memory alloy actuators ».
Journal of Intelligent Material Systems and Structures, vol. 26, nº 15.
pp. 2055-2072.
Langlais, David, Demers, Vincent and Brailovski, Vladimir.
2022.
« Rheology of dry powders and metal injection molding feedstocks formulated on their base ».
Powder Technology, vol. 396, nº Part A.
pp. 13-26.
Le Bras, Linh-Aurore, Timercan, Anatolie, Llido, Marie, Petit, Yvan, Seguin, Bernard, Lussier, Bertrand and Brailovski, Vladimir.
2022.
« Personalized endoprostheses for the proximal humerus and scapulohumeral joint in dogs: Biomechanical study of the muscles’ contributions during locomotion ».
PLoS ONE, vol. 17, nº 1.
Leclercq, Aurore and Brailovski, Vladimir.
2024.
« Improving laser powder bed fusion printability of tungsten powders using simulation-driven process optimization algorithms ».
Materials, vol. 17, nº 8.
Leclercq, Aurore, Mouret, Thibault and Brailovski, Vladimir.
2025.
« Laser powder bed fusion of molybdenum: Density, structure and mechanical properties at room and elevated temperatures ».
Materials Science and Engineering: A, vol. 929.
Letenneur, Morgan, Brailovski, Vladimir, Kreitcberg, Alena, Paserin, Vladimir and Bailon-Poujol, Ian.
2017.
« Laser powder bed fusion of water-atomized iron-based powders: process optimization ».
Journal of Manufacturing and Materials Processing, vol. 1, nº 2.
Letenneur, Morgan, Imbrogno, Pete, Molavi-Kakhki, Amin and Brailovski, Vladimir.
2020.
« Laser powder bed fusion with intentionally-seeded porosity for prototyping of powder metallurgy parts ».
Journal of Manufacturing and Materials Processing, vol. 4, nº 4.
Letenneur, Morgan, Kreitcberg, Alena and Brailovski, Vladimir.
2019.
« Optimization of laser powder bed fusion processing using a combination of melt pool modeling and design of experiment approaches: Density control ».
Journal of Manufacturing and Materials Processing, vol. 3, nº 1.
Letenneur, Morgan, Kreitcberg, Alena and Brailovski, Vladimir.
2020.
« The average grain size and grain aspect ratio in metal laser powder bed fusion: Modeling and experiment ».
Journal of Manufacturing and Materials Processing, vol. 4, nº 1.
Llido, Marie, Le Bras, Linh-Aurore, Brailovski, Vladimir, Séguin, Bernard, Masseau, Isabelle, Petit, Yvan and Lussier, Bertrand.
2023.
« Muscular morphometric study of the canine shoulder for the design of 3D-printed endoprostheses in dogs with osteosarcoma of the proximal humerus: A pilot cadaveric study by MRI ».
American Journal of Veterinary Research, vol. 84, nº 6.
Lukashevich, K. E., Sheremetyev, V. A., Kudryashova, A. A., Derkach, M. A., Andreev, V. A., Galkin, S. P., Prokoshkin, S. D. and Brailovski, V..
2022.
« Effect of forging temperature on the structure, mechanical and functional properties of superelastic Ti-Zr-Nb bar stock for biomedical applications ».
Letters on Materials, vol. 12, nº 1.
pp. 54-58.
Lukashevich, Konstantin, Sheremetyev, Vadim, Komissarov, Alexander, Cheverikin, Vladimir, Andreev, Vladimir, Prokoshkin, Sergey and Brailovski, Vladimir.
2022.
« Effect of cooling and annealing conditions on the microstructure, mechanical and superelastic behavior of a rotary forged Ti–18Zr–15Nb (at. %) bar stock for spinal implants ».
Journal of Functional Biomaterials, vol. 13, nº 4.
Maîtrejean, Guillaume, Terriault, Patrick and Brailovski, Vladimir.
2013.
« Density dependence of the macroscale superelastic behavior of porous shape memory alloys: a two-dimensional approach ».
Smart Materials Research, vol. 2013.
Majdi, Seyed Mohammad, Tafti, Atefeh Ayatollahi, Demers, Vincent, Vachon, Guillem and Brailovski, Vladimir.
2022.
« Effect of powder particle shape and size distributions on the properties of low-viscosity iron-based feedstocks used in low-pressure powder injection moulding ».
Powder Metallurgy, vol. 65, nº 2.
pp. 170-180.
Miclette, Olivier, Côté, Raphaël, Demers, Vincent and Brailovski, Vladimir.
2022.
« Material extrusion additive manufacturing of low-viscosity metallic feedstocks: Performances of the plunger-based approach ».
Additive Manufacturing, vol. 60, nº Part A.
Mohammadian, Neda, Turenne, Sylvain and Brailovski, Vladimir.
2019.
« Electropolishing of laser powder bed-fused IN625 components in an ionic electrolyte ».
Journal of Manufacturing and Materials Processing, vol. 3, nº 4.
Mohammadian, Neda, Turenne, Sylvain and Brailovski, Vladimir.
2018.
« Surface finish control of additively-manufactured Inconel 625 components using combined chemical-abrasive flow polishing ».
Journal of Materials Processing Technology, vol. 252.
pp. 728-738.
Moquin, E., Letenneur, M., Kreitcberg, A., Poulin-Masson, J. R. and Brailovski, V..
2023.
« High cycle fatigue resistance of laser powder bed fused Ti–6Al–4V alloys with processing-induced porosity: Towards damage-tolerant design of printed components ».
Materials Science and Engineering: A, vol. 884.
Mostafa, Ahmad, Rubio, Ignacio Picazo, Brailovski, Vladimir, Jahazi, Mohammad and Medraj, Mamoun.
2017.
« Structure, texture and phases in 3D printed IN718 alloy subjected to homogenization and HIP treatments ».
Metals, vol. 7, nº 6.
Mostafa, Ahmad, Shahriari, Davood, Rubio, Ignacio Picazo, Brailovski, Vladimir, Jahazi, Mohammad and Medraj, Mamoun.
2018.
« Hot compression behavior and microstructure of selectively laser-melted IN718 alloy ».
International Journal of Advanced Manufacturing Technology, vol. 96, nº 1-4.
pp. 371-385.
Nijikovsky, Boris, Aguirre Perales, Lydia, Brika, Salah Eddine and Brailovski, Vladimir.
2020.
« Towards reliable optimization of metal powderLubricant mixing for high die filling performance: Exploring a rheology based approach ».
Powder Technology, vol. 362.
pp. 168-176.
Poulin, J. R., Brailovski, V. and Terriault, P..
2018.
« Long fatigue crack propagation behavior of Inconel 625 processed by laser powder bed fusion: Influence of build orientation and post-processing conditions ».
International Journal of Fatigue, vol. 116.
pp. 634-647.
Poulin, J. R., Kreitcberg, A. and Brailovski, V..
2021.
« Effect of hot isostatic pressing of laser powder bed fused Inconel 625 with purposely induced defects on the residual porosity and fatigue crack propagation behavior ».
Additive Manufacturing, vol. 47.
Poulin, J. R., Kreitcberg, A., Terriault, P. and Brailovski, V..
2020.
« Fatigue strength prediction of laser powder bed fusion processed Inconel 625 specimens with intentionally-seeded porosity: Feasibility study ».
International Journal of Fatigue, vol. 132.
Poulin, J.-R., Kreitcberg, A., Terriault, P. and Brailovski, V..
2019.
« Long fatigue crack propagation behavior of laser powder bed-fused inconel 625 with intentionally-seeded porosity ».
International Journal of Fatigue, vol. 127.
pp. 144-156.
Prokoshkin, S., Brailovski, V., Dubinskiy, S., Inaekyan, K. and Kreitcberg, A..
2016.
« Gradation of nanostructures in cold-rolled and annealed Ti–Ni shape memory alloys ».
Shape Memory and Superelasticity, vol. 2, nº 1.
pp. 12-17.
Prokoshkin, S., Brailovski, V., Dubinskiy, S., Zhukova, Y., Sheremetyev, V., Konopatsky, A. and Inaekyan, K..
2016.
« Manufacturing, structure control, and functional testing of Ti–Nb-Based SMA for medical application ».
Shape Memory and Superelasticity, vol. 2, nº 2.
pp. 130-144.
Prokoshkin, S., Brailovski, V., Inaekyan, K., Demers, V. and Kreitcberg, A..
2015.
« Nanostructured Ti–Ni shape memory alloys produced by thermomechanical processing ».
Shape Memory and Superelasticity, vol. 1, nº 2.
pp. 191-203.
Prokoshkin, S., Dubinskiy, S., Brailovski, V., Korotitskiy, A., Konopatsky, A., Sheremetyev, V. and Blinova, E..
2017.
« Nanostructures and stress-induced phase transformation mechanism in titanium nickelide annealed after moderate cold deformation ».
Materials Letters, vol. 192.
pp. 111-114.
Prokoshkin, Sergey, Brailovski, Vladimir, Dubinskiy, Sergey, Inaekyan, Karine and Kreitcberg, Alena.
2017.
« Peculiarities of nanostructure formation upon post-deformation annealing of Ti-Ni shape memory alloys ».
[Conference paper]. Materials Today: Proceedings, vol. 4, nº 3.
pp. 4819-4824.
Prokoshkin, Sergey, Dubinskiy, Sergey and Brailovski, Vladimir.
2019.
« Features of a nanosubgrained structure in deformed and annealed Ti–Ni SMA: A brief review ».
Shape Memory and Superelasticity, vol. 5, nº 4.
pp. 336-345.
Prokoshkin, Sergey, Dubinskiy, Sergey, Korotitskiy, Andrey, Konopatsky, Anton, Sheremetyev, Vadim, Shchetinin, Igor, Glezer, Alexander and Brailovski, Vladimir.
2019.
« Nanostructure features and stress-induced transformation mechanisms in extremely fine-grained titanium nickelide ».
Journal of Alloys and Compounds, vol. 779.
pp. 667-685.
Samoilenko, Mykhailo, Lanik, Greg and Brailovski, Vladimir.
2021.
« Towards the determination of machining allowances and surface roughness of 3D-printed parts subjected to abrasive flow machining ».
Journal of Manufacturing and Materials Processing, vol. 5, nº 4.
Samoilenko, Mykhailo, Seers, Patrice, Terriault, Patrick and Brailovski, Vladimir.
2019.
« Design, manufacture and testing of porous materials with ordered and random porosity: application to porous medium burners ».
Applied Thermal Engineering, vol. 158.
Seede, Raiyan, Mostafa, Ahmad, Brailovski, Vladimir, Jahazi, Mohammad and Medraj, Mamoun.
2018.
« Microstructural and microhardness evolution from homogenization and hot isostatic pressing on selective laser melted inconel 718: Structure, texture, and phases ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 2.
Séguin, Bernard, Pinard, Chris, Lussier, Bertrand, Williams, Deanna, Griffin, Lynn, Podell, Brendan, Mejia, Sebastian, Timercan, Anatolie, Petit, Yvan and Brailovski, Vladimir.
2020.
« Limb-sparing in dogs using patient-specific, three-dimensional-printed endoprosthesis for distal radial osteosarcoma: a pilot study ».
Veterinary and Comparative Oncology, vol. 18, nº 1.
pp. 92-104.
Sheremet'ev, V. A., Kudryashova, A. A., Dinh, Xuan Ta, Galkin, S. P., Prokoshkin, S. D. and Brailovskii, V..
2019.
« Advanced technology for preparing bar from medical grade Ti-Zr-Nb superelastic alloy based on combination of radial-shear rolling and rotary forging ».
Metallurgist, vol. 63, nº 1-2.
pp. 51-61.
Sheremetyev, V. A., Dubinskiy, S. M., Ikbal, M. A., Korobkova, A. A., Kazakbiev, A. M., Prokoshkin, S. D. and Brailovski, V..
2017.
« Effect of dynamical chemical etching on the porous structure parameters of superelastic medical TiNbZr alloy foam ».
Russian Metallurgy (Metally), vol. 2017, nº 10.
pp. 789-793.
Sheremetyev, V. A., Prokoshkin, S. D., Brailovski, V., Dubinskiy, S. M., Korotitskiy, A. V., Filonov, M. R. and Petrzhik, M. I..
2015.
« Investigation of the structure stability and superelastic behavior of thermomechanically treated Ti-Nb-Zr and Ti-Nb-Ta shape-memory alloys ».
Physics of Metals and Metallography, vol. 116, nº 4.
pp. 413-422.
Sheremetyev, V. A., Tsaturyants, M. S., Dubinskiy, S. M., Lezin, V. D., Kreitcberg, A. Y., Konopatsky, A. S. and Brailovski, V..
2023.
« Effect of heat treatment on structure and properties of Ti–Zr–Nb Alloy for medical application produced by selective laser melting ».
Inorganic Materials: Applied Research, vol. 14, nº 4.
pp. 987-996.
Sheremetyev, V., Brailovski, V., Prokoshkin, S., Inaekyan, K. and Dubinskiy, S..
2016.
« Functional fatigue behavior of superelastic beta Ti-22Nb-6Zr(at%) alloy for load-bearing biomedical applications ».
Materials Science and Engineering: C, vol. 58.
pp. 935-944.
Sheremetyev, V., Dubinskiy, S., Iqbal, M. A., Lukashevich, K., Prokoshkin, S. and Brailovski, V..
2021.
« Effect of dynamic chemical etching on the pore structure, permeability, and mechanical properties of Ti-Nb-Zr scaffolds for medical applications ».
Journal of Manufacturing Science and Engineering, vol. 143, nº 5.
Sheremetyev, V., Dubinskiy, S., Kudryashova, A., Prokoshkin, S. and Brailovski, V..
2022.
« In situ XRD study of stress- and cooling-induced martensitic transformations in ultrafine- and nano-grained superelastic Ti-18Zr-14Nb alloy ».
Journal of Alloys and Compounds, vol. 902.
Sheremetyev, V., Konopatsky, A., Teplyakova, T., Lezin, V., Lukashevich, K., Derkach, M., Kostyleva, A., Koudan, E., Permyakova, E., Iakimova, T., Boychenko, O., Klyachko, N., Shtansky, D., Prokoshkin, S. and Brailovski, V..
2024.
« Surface modification of the laser powder bed-fused Ti-Zr-Nb scaffolds by dynamic chemical etching and Ag nanoparticles decoration ».
Biomaterials Advances, vol. 161.
Sheremetyev, V., Kudryashova, A., Cheverikin, V., Korotitskiy, A., Galkin, S., Prokoshkin, S. and Brailovski, V..
2019.
« Hot radial shear rolling and rotary forging of metastable beta Ti-18Zr-14Nb (at. %) alloy for bone implants: microstructure, texture and functional properties ».
Journal of Alloys and Compounds.
pp. 320-326.
Sheremetyev, V., Kudryashova, A., Dubinskiy, S., Galkin, S., Prokoshkin, S. and Brailovski, V..
2018.
« Structure and functional properties of metastable beta Ti-18Zr-14Nb (at.%) alloy for biomedical applications subjected to radial shear rolling and thermomechanical treatment ».
Journal of Alloys and Compounds, vol. 737.
pp. 678-683.
Sheremetyev, V., Lukashevich, K., Aleksandrovskiy, E., Vasilyev, K., Komarov, R., Brailovski, V. and Prokoshkin, S..
2024.
« Hot 3-roll longitudinal rolling and tension straightening of a superelastic Ti-Zr-Nb alloy for orthopedic implants: Microstructure, texture, mechanical and functional properties ».
Materials Today Communications, vol. 40.
Sheremetyev, V., Lukashevich, K., Kreitcberg, A., Kudryashova, A., Tsaturyants, M., Galkin, S., Andreev, V., Prokoshkin, S. and Brailovski, V..
2022.
« Optimization of a thermomechanical treatment of superelastic Ti-Zr-Nb alloys for the production of bar stock for orthopedic implants ».
Journal of Alloys and Compounds, vol. 928.
Sheremetyev, V., Prokoshkin, S., Brailovski, V., Dubinskiy, S., Filonov, M. and Petrzhik, M..
2015.
« Long-term stability of superelastic behavior of nanosubgrained Ti-Nb-Zr and Ti-Nb-Ta shape memory alloys ».
[Conference paper]. Materials Today: Proceedings, vol. 2, nº suppl. 1.
S26-S31.
Sheremetyev, Vadim, Derkach, Mikhail, Churakova, Anna, Komissarov, Aleksander, Gunderov, Dmitry, Raab, Georgy, Cheverikin, Vladimir, Prokoshkin, Sergey and Brailovski, Vladimir.
2022.
« Microstructure, mechanical and superelastic properties of Ti-Zr-Nb alloy for biomedical application subjected to equal channel angular pressing and annealing ».
Metals, vol. 12, nº 10.
Sheremetyev, Vadim, Ijaz, Muhammad Farzik, Kudryashova, Anastasia, Konopatsky, Anton S., Prokoshkin, Sergey and Brailovski, Vladimir.
2019.
« Characterization of the superelastic and structural characteristics of β-Ti alloys by strain-controlled cycling after thermomechanical processing and subsequent ageing ».
Journal of Metastable and Nanocrystalline Materials, vol. 31.
pp. 43-50.
Sheremetyev, Vadim, Petrzhik, Mikhail, Zhukova, Yulia, Kazakbiev, Alibek, Arkhipova, Anastasia, Moisenovich, Mikhail, Prokoshkin, Sergey and Brailovski, Vladimir.
2020.
« Structural, physical, chemical, and biological surface characterization of thermomechanically treated Ti-Nb-based alloys for bone implants ».
Journal of Biomedical Materials Research - Part B Applied Biomaterials, vol. 108, nº 3.
pp. 647-662.
Simoneau, C., Brailovski, V. and Terriault, P..
2016.
« Design, manufacture and tensile properties of stochastic porous metallic structures ».
Mechanics of Materials, vol. 94.
pp. 26-37.
Simoneau, Charles, Terriault, Patrick, Jetté, Bruno, Dumas, Mathieu and Brailovski, Vladimir.
2017.
« Development of a porous metallic femoral stem: Design, manufacturing, simulation and mechanical testing ».
Materials and Design, vol. 114.
pp. 546-556.
Sirois, Julien, Sanjosé, Marlène, Sanchez, Fabian and Brailovski, Vladimir.
2024.
« Vortex-breakdown efficiency of planar regular grid structures—towards the development of design guidelines ».
Fluids, vol. 9, nº 2.
Soldatenko, A. S., Karachevtseva, M. A., Sheremetyev, V. A., Kudryashova, A. A., Arkhipova, A. Y., Andreev, V. A., Prokoshkin, S. D., Brailovski, V., Moisenovich, M. M. and Shaitan, K. V..
2019.
« Features of in vitro interaction of osteoblast-like MG-63 cells with the surface of Ti-Zr-Nb shape memory alloys ».
Moscow University Biological Sciences Bulletin, vol. 74, nº 4.
pp. 250-255.
Soul, Hugo, Terriault, Patrick and Brailovski, Vladimir.
2018.
« The static and fatigue behavior of AlSiMg alloy plain, notched, and diamond lattice specimens fabricated by laser powder bed fusion ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 2.
Ta Dinh, Xuan, Sheremetyev, V. A., Kudryashova, A. A., Galkin, S. P., Andreev, V. A., Prokoshkin, S. D. and Brailovski, V..
2020.
« Influence of the combined radial shear rolling and rotary forging on the deformation mode of the small-diameter rod billet made of titanium alloys ».
Russian Journal of Non-Ferrous Metals, vol. 61, nº 3.
pp. 271-279.
Tafti, Atefeh A., Demers, Vincent, Majdi, Seyed M., Vachon, Guillem and Brailovski, Vladimir.
2021.
« Effect of thermal debinding conditions on the sintered density of low-pressure powder injection molded iron parts ».
Metals, vol. 11, nº 2.
Tafti, Atefeh A., Demers, Vincent, Vachon, Guillem and Brailovski, Vladimir.
2021.
« Effect of binder constituents and solids loading on the rheological behavior of irregular iron-based feedstocks ».
Journal of Manufacturing Science and Engineering, vol. 143, nº 3.
Tafti, Atefeh A., Demers, Vincent, Vachon, Guillem and Brailovski, Vladimir.
2023.
« Influence of powder size on the moldability and sintered properties of irregular iron-based feedstock used in low-pressure powder injection molding ».
Powder Technology, vol. 420.
Terriault, Patrick and Brailovski, Vladimir.
2017.
« Influence of boundary conditions on the simulation of a diamond-type lattice structure: A preliminary study ».
Advances in Materials Science and Engineering, vol. 2017.
Terriault, Patrick and Brailovski, Vladimir.
2018.
« Modeling and simulation of large, conformal, porosity-graded and lightweight lattice structures made by additive manufacturing ».
Finite Elements in Analysis and Design, vol. 138.
pp. 1-11.
Timercan, Anatolie, Brailovski, Vladimir, Petit, Yvan, Lussier, Bertrand and Seguin, Bernard.
2019.
« Personalized 3D-printed endoprostheses for limb sparing in dogs: modeling and in vitro testing ».
Medical Engineering and Physics, vol. 71.
pp. 17-29.
Timercan, Anatolie, Campion, Donatien, Terriault, Patrick and Brailovski, Vladimir.
2024.
« Laser powder bed fusion of superelastic Ti-Ni lattice structures: Process design and testing ».
Journal of Manufacturing and Materials Processing, vol. 8, nº 4.
Timercan, Anatolie, Sheremetyev, Vadim and Brailovski, Vladimir.
2021.
« Mechanical properties and fluid permeability of gyroid and diamond lattice structures for intervertebral devices: functional requirements and comparative analysis ».
Science and Technology of Advanced Materials, vol. 22, nº 1.
pp. 285-300.
Timercan, Anatolie, Terriault, Patrick and Brailovski, Vladimir.
2023.
« Axial tension/compression and torsional loading of diamond and gyroid lattice structures for biomedical implants: Simulation and experiment ».
Materials and Design, vol. 225.
Tremblay, Jaëlle, Mac-Thiong, Jean-Marc, Brailovski, Vladimir and Petit, Yvan.
2015.
« Braided tubular superelastic cables provide improved spinal stability compared to multifilament sublaminar cables ».
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol. 229, nº 9.
pp. 645-651.
Tremblay, Jaëlle, Mac-Thiong, Jean-Marc, Brailovski, Vladimir and Petit, Yvan.
2015.
« Factors affecting intradiscal pressure measurement during in vitrobiomechanical tests ».
Scoliosis, vol. 10, nº Suppl 1.
O19.
Trochu, F., Brailovski, V., Meunier, M. A., Terriault, P. and Qian, Y. Y..
1996.
« Thermomechanical analysis of shape memory devices ».
Bio-Medical Materials and Engineering, vol. 6, nº 6.
pp. 389-403.
Tsaturyants, M., Sheremetyev, V., Dubinskiy, S., Komarov, V., Polyakova, K., Korotitskiy, A., Prokoshkin, S., Borisov, E., Starikov, K., Kaledina, D., Popovich, A. and Brailovski, V..
2022.
« Structure and properties of Ti50.2Ni alloy processed by laser powder bed fusion and subjected to a combination of thermal cycling and heat treatments ».
Shape Memory and Superelasticity, vol. 8, nº 1.
pp. 16-32.
Turnier Trottier, William, Kreitcberg, Alena and Brailovski, Vladimir.
2021.
« Structure and mechanical properties of laser powder bed-fused and wrought ph13-8mo-type precipitation hardening stainless steels: Comparative study ».
Journal of Manufacturing and Materials Processing, vol. 5, nº 3.
Urlea, V. and Brailovski, V..
2017.
« Electropolishing and electropolishing-related allowances for IN625 alloy components fabricated by laser powder-bed fusion ».
International Journal of Advanced Manufacturing Technology, vol. 92, nº 9-12.
pp. 4487-4499.
Urlea, V. and Brailovski, V..
2017.
« Electropolishing and electropolishing-related allowances for powder bed selectively laser-melted Ti-6Al-4V alloy components ».
Journal of Materials Processing Technology, vol. 242.
pp. 1-11.
Xuan, T. D., Sheremetyev, V. A., Komarov, V. S., Kudryashova, A. A., Galkin, S. P., Andreev, V. A., Prokoshkin, S. D. and Brailovski, V..
2021.
« Comparative study of superelastic Ti–Zr–Nb and commercial VT6 alloy billets by QForm simulation ».
Russian Journal of Non-Ferrous Metals, vol. 62, nº 1.
pp. 39-47.
Zhukova, Y. S., Pustov, Y. A., Konopatsky, A. S., Dubinskiy, S. M., Filonov, M. R. and Brailovski, V..
2015.
« Corrosion fatigue and electrochemical behavior of superelastic Ti-Nb-Ta alloy for medical implants under cyclic load conditions ».
[Conference paper]. Materials Today: Proceedings, vol. 2, nº Supp. 3.
S991-S994.
Zhukova, Yulia, Korobkova, Anastasia, Dubinskiy, Sergey, Pustov, Yury, Konopatsky, Anton, Podgorny, Dmitry, Filonov, Mikhail, Prokoshkin, Sergey and Brailovski, Vladimir.
2019.
« The electrochemical and mechanical behavior of bulk and porous superelastic Ti-Zr-based alloys for biomedical applications ».
Materials, vol. 12, nº 15.
Zongo, Floriane, Simoneau, Charles, Timercan, Anatolie, Tahan, Antoine and Brailovski, Vladimir.
2020.
« Geometric deviations of laser powder bedfused AlSi10Mg components: numerical predictions versus experimental measurements ».
International Journal of Advanced Manufacturing Technology, vol. 107.
pp. 1411-1436.
Zongo, Floriane, Tahan, Antoine, Aidibe, Ali and Brailovski, Vladimir.
2018.
« Intra- and inter-repeatability of profile deviations of an AlSi10Mg tooling component manufactured by laser powder bed fusion ».
Journal of Manufacturing and Materials Processing, vol. 2, nº 3.
Zongo, Floriane, Tahan, Antoine and Brailovski, Vladimir.
2019.
« Scale, material concentration, stress relief and part removal effects on the dimensional behaviour of selected AlSi10Mg components manufactured by laser powder bed fusion ».
Journal of Manufacturing and Materials Processing, vol. 3, nº 2.
Conference proceeding
Brailovski, Vladimir and Terriault, Patrick.
2010.
« A systematic approach to performance evaluation of shape memory alloys as actuator material ».
In 6th International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Berlin, Germany, Aug. 25-29, 2009)
Coll. « Materials Science Forum », vol. 638-642.
pp. 2034-2039.
Berlin, Germany : Trans Tech Publications Ltd.
Brailovski, Vladimir, Terriault, Patrick, Georges, Thomas and Coutu, Daniel.
2010.
« SMA actuators for morphing wings ».
In 3rd International Symposium on Shape Memory Materials for Smart Systems/E-MRS 2010 Spring Meeting (Strasbourg, France, June 7-10, 2010)
Coll. « Physics Procedia », vol. 10.
pp. 197-203.
Amsterdam, Netherlands : Elsevier.
Baril, Y., Brailovski, Vladimir, Chartrand, M., Terriault, Patrick and Cartier, R..
2008.
« In-vitro testing of a new superelastic sternum closure component ».
In SMST-2007: Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Tsukuba, Japan, Dec. 2-5, 2007)
pp. 497-505.
Materials Park, OH : ASM International.
Baril, Yannick, Brailovski, Vladimir and Terriault, Patrick.
2008.
« Fatigue properties of superelastic Ti-Ni filaments used in braided cables for bone fixation ».
In Biomedical Applications of Smart Materials (Acireale, Sicily, Italy, June 8-13, 2008)
Coll. « Advances in Science and Technology », vol. 57.
pp. 235-240.
Stafa-Zurich : Trans Tech Publications Ltd.
Baril, Y., Brailovski, Vladimir, Terriault, Patrick and Cartier, R..
2008.
« Modeling and testing of a new sternal closure device using tubular mesh-like superelastic nitinol structure ».
In SMST-2006 : Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Pacific Grove, CA, USA, May 7-11, 2006)
pp. 665-680.
Materials Park, OH : ASM International.
Inaekyan, K. E., Prokoshkin, S. D., Brailovski, V., Khmelevskaya, I. Yu., Demers, V., Dobatkin, S. V., Tatyanin, E. V. and Bastarache, E..
2005.
« Substructure and nanocrystalline structure effects in thermomechanically treated Ti-Ni alloys ».
In Nanomaterials by Severe Plastic Deformation (Fukuoka, Japan, Sept. 22-26, 2005)
Coll. « Materials Science Forum », vol. 503-504.
pp. 597-602.
Stafa-Zuerich, Switzerland : Trans Tech Publications Ltd.
Inaekyan, K. E., Brailovski, Vladimir, Prokoshkin, S. D., Korotitskiy, A. V. and Chernavina, A..
2009.
« Microhardness of binary near-equiatomic Ti-Ni alloys after severe cold rolling and post-deformation annealing ».
In 8th European Symposium on Martensitic Transformations (ESOMAT) (Prague, Czech Republic, Sept. 7-11, 2009)
Cedex A, France : E D P Sciences.
Khmelevskaya, I., Prokoshkin, S., Brailovski, Vladimir, Inaekyan, K., Demers, V., Gurtovaya, I., Korotitskiy, A. and Dobatkin, S..
2008.
« Functional properties of Ti-Ni-based shape memory alloys ».
In State-of-the-art Research and Application of SMAs Technologies (Acireale, Sicily, Italy, June 8-13, 2008)
Coll. « Advances in Science and Technology », vol. 59.
pp. 156-161.
Stafa-Zuerich, Suisse : Trans Tech Publications Ltd.
Korotitskiy, Andrey V., Inaekyan, K. E., Brailovski, Vladimir and Prokoshkin, Sergey D..
2008.
« Long-term microhardness evolution in Ti-Ni shape memory alloys processed by severe cold rolling ».
In Nanomaterials by Severe Plastic Deformation IV (Goslar, Germany, Aug. 18-22, 2008)
Coll. « Materials Science Forum », vol. 584-586.
pp. 1039-1044.
Stafa-Zuerich, Switzerland : Trans Tech Publications Ltd.
Lafortune, P., Terriault, Patrick, Brailovski, Vladimir and Torra, V..
2008.
« Superelasticity-related phenomena of shape memory alloy passive dampers ».
In SMST-2006 : Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Pacific Grove, CA, USA, May 7-11, 2006)
pp. 507-524.
Materials Park, OH : ASM International.
Prokoshkin, S., Korotitskiy, A., Brailovski, Vladimir and Inaekyan, K.
2008.
« Effect of dislocation substructure and grain structure of B2-austenite on martensite lattice parameters and transformation lattice strain in binary Ti-Ni Alloys ».
In SMST-2007: Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Tsukuba, Japan, Dec. 2-5, 2007)
pp. 63-70.
Materials Park, OH : ASM International.
Prokoshkin, S.D., Korotitskiy, A.V., Brailovski, Vladimir and Inaekyan, K.E..
2008.
« Effect of nanocrystalline structure and polygonized dislocaton substructure on Ti-Ni martensite lattice parameters and transformation latice strain ».
In Nanomaterials by Severe Plastic Deformation IV (Goslar, Germany, Aug. 18-22, 2008)
Coll. « Materials Science Forum », vol. 584-586.
pp. 475-480.
Stafa-Zuerich, Switzerland : Trans Tech Publications.
Terriault, Patrick, Lafortune, P., Plamondon, Dominic and Brailovski, Vladimir.
2008.
« Design of a progressively expandable stent using finite elements ».
In Biomedical Applications of Smart Materials (Acireale, Sicily, Italy, June 8-13, 2008)
Coll. « Advances in Science and Technology », vol. 57.
pp. 241-246.
Uetikon-Zuerich, Switzerland : Trans Tech Publications Ltd.
Georges, T., Brailovski, Vladimir, Coutu, D. and Terriault, Patrick.
2008.
« Design diagram for linear SMA actuators integrated in a morphing wing structure ».
In SMST-2007: Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Tsukuba, Japan, Dec. 2-5, 2007)
pp. 455-462.
Materials Park, OH : ASM International.
Brailovski, Vladimir, Prokoshkin, S., Inaekyan, K., Korotitskiy, A. and Glezer, A..
2008.
« Structure and properties features of nanostructured Ti0Ni SMA after severe plastic deformation and post-deformation annealing ».
In SMST-2007: Proceedings of the International Conference on Shape Memory and Superelastic Technologies (Tsukuba, Japan, Dec. 2-5, 2007)
pp. 17-26.
Materials Park, OH : ASM International.
Brailovski, Vladimir, Terriault, Patrick, Coutu, D., Georges, T., Morellon, E., Fischer, C. and Bérubé, S..
2008.
« Morphing laminar wing with flexible extrados powered by shape memory alloy actuators ».
In ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) (Ellicott, USA, Oct. 28-30, 2008)
pp. 615-623.
New York, NY, USA : American Society of Mechanical Engineers.
Coutu, Daniel, Brailovski, Vladimir, Terriault, Patrick, Mamou, Mahmoud and Laurendeau, Éric.
2009.
« Real-time optimization of a research morphing laminar wing in a wind tunnel ».
In ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) (Oxnard, CA, USA, Sept. 21-23, 2009)
Coll. « ASME Conference Proceedings »
pp. 203-209.
New York, NY, USA : American Society of Mechanical Engineers.
Georges, Thomas, Brailovski, Vladimir, Morellon, Emeric, Coutu, Daniel and Terriault, Patrick.
2009.
« Wind-tunnel testing of shape memory alloys actuators as morphing wing driving systems ».
In ASME Conference on Smart Materials, Adaptive Structures and Intelligent Systems (SMASIS) (Oxnard, CA, USA, Sept. 21-23, 2009)
Coll. « ASME Conference Proceedings »
pp. 169-174.
New York, NY, USA : American Society of Mechanical Engineers.
Terriault, Patrick, Settouane, Karim and Brailovski, Vladimir.
2003.
« Biaxial testing at different temperatures of cruciform Ti-Ni samples ».
In International Conference on Shape Memory and Superelastic Technologies (SMST) (Pacific Grove, CA, USA, May 5-8, 2003)
pp. 247-257.
Menlo Park, CA, USA : SMST.
Ould-Brahim, N., Bouzid, Abdel-Hakim and Brailovski, Vladimir.
2011.
« Characteristics of a bolted joint with a shape memory alloy stud ».
In 5th International Conference on Computational Methods and Experiments in Materials Characterisation (MC) (Malta, July 13-15, 2011)
Coll. « WIT Transactions on Engineering Sciences », vol. 72.
pp. 339-347.
United Kingdom : WITPress.
Ould-Brahim, Nazim, Bouzid, Abdel-Hakim and Brailovski, Vladimir.
2011.
« Load recovery of a bolted joint with a shape memory alloy stud ».
In ASME Pressure Vessels and Piping Conference (PVP) (Baltimore, Maryland, USA, July 17-21, 2011)
pp. 321-328.
ASME.
Canet, Fanny, Baril, Yannick, Brailovski, Vladimir, Petit, Yvan, Bissonnette, Guillaume and Laflamme, G. Yves.
2011.
« Force relaxation and sprinback of novel elastic orthopedic cables ».
In 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBS) (Boston, MA, USA, Aug. 30-Sept. 3, 2011)
pp. 5758-5761.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Canet, Fanny, Duke, Kajsa, Bourgeois, Yan, Laflamme, G. Yves, Brailovski, Vladimir and Petit, Yvan.
2011.
« Effect of force tightening on cable tension and displacement in greater trochanter reattachment ».
In 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBS) (Boston, MA, Aug. 30-Sept. 3, 2011)
pp. 5749-5752.
Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Filonov, M. R., Brailovski, Vladimir, Prokoshkin, S. D., Zhukova, Y. S. and Dubinsky, S. M..
2011.
« A study of structure formation in Ti-Nb-Zr shape memory alloys for medical application ».
In III Nanotechnology International Forum (Rusnanotech 2010) (Moscow, Russia, Nov. 1-3, 2010)
Coll. « Journal of Physics: Conference Series », vol. 291.
Institute of Physics Publishing.
Brailovski, Vladimir, Clement, E., Terriault, Patrick and Trochu, F..
2003.
« Influence of stress concentration on the recovery stress generation ».
In 10th International Conference on Martensitic Transformations (Espoo, Finland, June 10-14, 2002)
pp. 231-234.
France : EDP Sciences.
Clement, E., Brailovski, Vladimir, Terriault, Patrick and Trochu, E..
2004.
« Influence of stress concentration on the thermomechanical behavior of NiTi shape memory alloys ».
In International Conference on Shape Memory and Superelastic Technologies (SMST) (Pacific Grove, CA, USA, May 5-8, 2003)
pp. 463-473.
Menlo Park, CA, USA : SMST.
Makarenkov, D. Y., Brailovski, Vladimir and Trochu, F..
2003.
« Calculation of shape recovery in textured SM material ».
In International Conference on Martensitic Transormations (Espoo, Finland, June 10-14, 2002)
Coll. « Journal de Physique IV », vol. 112.
pp. 239-244.
France : EDP Sciences.
Prokoshkin, S. D., Brailovski, Vladimir, Turenne, S., Khmelevskaya, I. Y., Korotitskiy, A. V. and Trubitsyna, I. B..
2003.
« Concentration, temperature and deformation dependences of martensite lattice parameters in binary Ti-Ni shape memory alloys ».
In International Conference on Martensitic Transormations (Espoo, Finland, June 10-14, 2002)
Coll. « Journal de Physique IV », vol. 112.
pp. 651-654.
France : EDP Sciences.
Prokoshkin, S. D., Khmelevskaya, I. Y., Brailovski, Vladimir, Trochu, F., Turenne, S., Turilina, V. Y. and Inaekyan, K. E..
2003.
« Comparative study of structure and strain diagram changes in Ti-Ni alloys thermomechanically treated in martensitic or austenitic states ».
In International Conference on Martensitic Transormations (Espoo, Finland, June 10-14, 2002)
Coll. « Journal de Physique IV », vol. 112.
pp. 789-793.
France : EDP Sciences.
Brailovski, Vladimir, Prokoshkin, S. D., Bastarash, E., Demers, V., Inaekyan, K. E. and Khmelevskaya, I. Yu.
2007.
« Thermal stability and nanocrystallization of amorphous Ti-Ni alloys prepared by cold rolling and post-deformation annealing ».
In THERMEC 2006
Coll. « Materials Science Forum », vol. 539-543.
pp. 1964-1970.
Switzerland : Trans Tech Publications Ltd.
Georges, Thomas, Brailovski, Vladimir and Terriault, Patrick.
2011.
« Design of active bias SMA actuators for morphing wing applications ».
In THERMEC 2011 Supplement (Quebec City, QC, Canada, Aug. 1-5, 2011)
Coll. « Advanced Materials Research », vol. 409.
pp. 627-632.
Germany : Trans Tech Publications.
Fischer, Charles, Terriault, Patrick and Brailovski, Vladimir.
2011.
« Debonding characterization of SMA/polymer morphing structures ».
In THERMEC 2011 Supplement (Quebec City, QC, Canada, Aug. 1-5, 2011)
Coll. « Advanced Materials Research », vol. 409.
pp. 621-626.
Germany : Trans Tech Publications.
Facchinello, Yann, Brailovski, Vladimir, Georges, Thomas and Prokoshkin, Sergey D..
2011.
« Functional properties of nanostructured Ti-Ni SMA produced by a combination of cold, warm rolling and annealing ».
In THERMEC 2011 Supplement (Quebec City, QC, Canada, Aug. 1-5, 2011)
Coll. « Advanced Materials Research », vol. 409.
pp. 615-620.
Germany : Trans Tech Publications.
Prokoshkin, Sergey, Brailovski, Vladimir, Inaekyan, Karine, Korotitskiy, Andrey, Dubinskiy, Sergey, Filonov, Mikhail and Petrzhik, Mikhail.
2012.
« A comparative study of structure formation in thermomechanically treated Ti-Ni and Ti-Nb-(Zr, Ta) SMA ».
In THERMEC 2011 (Quebec, QC, Canada, Aug. 1-5, 2011)
Coll. « Materials Science Forum », vol. 706-709.
pp. 1931-1936.
Trans Tech Publications Ltd.
Brailovski, Vladimir, Prokoshkin, Sergey, Inaekyan, Karine, Dubinskiy, Sergey and Gauthier, Maxime.
2012.
« Mechanical properties of thermomechanically-processed metastable beta Ti-Nb-Zr alloys for biomedical applications ».
In THERMEC 2011 (Quebec, QC, Canada, Aug. 1-5, 2011)
Coll. « Materials Science Forum », vol. 706-709.
pp. 455-460.
Trans Tech Publications Ltd.
Brailovski, Vladimir, Prokoshkin, Sergey, Inaekyan, Karine and Dubinskiy, Sergey.
2013.
« Influence of omega-phase precipitation hardening on the static and dynamic properties of metastable beta Ti-Nb-Zr and Ti-Nb-Ta alloys ».
In European Symposium on Martensitic Transformations (Saint-Petersburg, Russia, Sept. 9-16, 2012)
Coll. « Materials Science Forum », vol. 738-739.
pp. 189-194.
Trans Tech Publications Ltd.
Dubinskiy, Sergey, Brailovski, Vladimir, Prokoshkin, Sergey and Inaekyan, Karine.
2013.
« In-situ X-ray study of phase transformations in Ti-Nb-based SMA under variable stress-temperature conditions: Preliminary results ».
In European Symposium on Martensitic Transformations (Saint-Petersburg, Russia, Sept. 9-16, 2012)
Coll. « Materials Science Forum », vol. 738-739.
pp. 87-91.
Trans Tech Publications Ltd.
Prokoshkin, Sergey, Brailovski, Vladimir, Petrzhik, Mikhail, Filonov, Mikhail and Sheremetyev, Vadim.
2013.
« Mechanocyclic and time stability of the loading-unloading diagram parameters of nanostructured Ti-Nb-Ta and Ti-Nb-Zr SMA ».
In European Symposium on Martensitic Transformations (Saint-Petersburg, Russia, Sept. 9-16, 2012)
Coll. « Materials Science Forum », vol. 738-739.
pp. 481-485.
Trans Tech Publications Ltd.
Terriault, Patrick and Brailovski, Vladimir.
2013.
« Implementation of Likhachev's model into a finite element program ».
In European Symposium on Martensitic Transformations (Saint-Petersburg, Russia, Sept. 9-16, 2012)
Coll. « Materials Science Forum », vol. 738-739.
pp. 160-164.
Trans Tech Publications Ltd.
Mamou, M., Mebarki, Y., Khalid, M., Genest, M., Coutu, D., Popov, A. V., Sainmont, C., Georges, T., Grigorie, L., Botez, Ruxandra, Brailovski, Vladimir, Terriault, Patrick, Paraschivoiu, I. and Laurendeau, E..
2010.
« Aerodynamic performance optimization of a wind tunnel morphing wing model subject to various cruise flow conditions ».
In 27th Congress of the International Council of the Aeronautical Sciences 2010, ICAS 2010 (Nice, France, Sept. 19-24, 2010)
pp. 1137-1161.
ICAS Secretariat.
Baril, Y., Brailovski, Vladimir, Cartier, R. and Terriault, Patrick.
2005.
« Feasibility study of a new sternal closure device using tubular braided superelastic nitinol structure ».
In Materials and Processes for Medical Devices Conference & Exposition (Boston, MA, USA, Nov. 14-16, 2005)
pp. 243-248.
Kinsman Road, OH, USA : ASM International.
Gauthier, François-Simon, Vachon, Pierre-Luc, Brailovski, Vladimir and Terriault, Patrick.
2005.
« Development of a numerical model for the optimization of damage controlling carbon/epoxy composites containing SMA wires ».
In International Workshop on Smart Materials and Structures (Cansmart) (Toronto, ON, Canada, Oct. 12-13, 2006)
pp. 261-270.
Kingston, Canada : CanSmart Group.
Coutu, D., Brailovski, Vladimir, Demers, V. and Terriault, Patrick.
2006.
« The design diagram for optimal shape memory alloys linear actuators ».
In 10th International Conference on New Actuators (Bremen, Germany, June 14-16, 2006)
pp. 924-927.
Bremen, Germany : HVG Hanseatische Veranstaltungs-GmbH.
Prokoshkin, S., Khmelevskaya, I., Dobatkin, S., Trubitsyna, I., Tatyanin, E., Turenne, S., Brailovski, Vladimir, Stolyarov, V. and Prokofiev, E..
2006.
« Thermomechanical conditions for nanocrystalline structure formation and functional properties of severely deformed Ti-Ni shape memory alloys ».
In International Symposium on Ultrafine Gained Materials (San Antonio, TX, USA, Mar. 12-16, 2006)
pp. 301-306.
Warrendale, PA, USA : The Minerals, Metals & Materials Society.
Brailovski, Vladimir.
2001.
« Optimization of the Post-Deformation Annealing Heat Treatment for NiTi Shape Memory Alloys ».
In SMST-2000: proceedings of the International Conference on Shape Memory and Superelastic Technologies, 30 April to 4 May 2000, Asilomar Conference Center, Pacific Grove, California, USA (Asilomar, CA, USA, Mai 2000)
pp. 33-41.
Fremont, CA, USA : SMST.
Coutu, D, Brailovski, Vladimir, Terriault, Patrick and Fisher, C.
2007.
« Experimental validation of the 3D numerical model for an adaptative laminar wing with flexible extrados ».
In 18th International Conference on Adaptive Structures and Technologies : ICAST 2007 ; October 3 - 5, 2007, Ottawa, Ontario, Canada (Ottawa, ON, Canada, Oct. 3-5, 2007)
pp. 260-269.
Redhook, NY, USA : Curran.
Brailovski, Vladimir, Prokoshkin, S. D., Inaekyan, K. E. and Demers, V..
2009.
« Functional properties of nanocrystalline, submicrocrystalline and polygonized Ti-Ni alloys processed by cold rolling and post-deformation annealing ».
In 8th European Symposium on Martensitic Transformations (ESOMAT) (Prague, Czech Republic, Sept. 7-11, 2009)
Cedex A, France : E D P Sciences.
Terriault, Patrick, Lacasse, Simon, Simoneau, Charles and Brailovski, Vladimir.
2013.
« Adaptive composite panel with embedded SMA actuators: design, manufacturing, testing ».
In 19th International Conference on Composite Materials (ICCM19) (Montreal, QC, Canada, July 28-Aug. 2, 2013)
pp. 5745-5753.
International Committee on Composite Materials.
Aidibe, A., Tahan, A. and Brailovski, V..
2018.
« A novel industrial test artifact for the evaluation of dimensional capabilities of metallic additive manufacturing systems ».
In Proceedings of the European Powder Metallurgy Association (EPMA) : Euro PM2018 (Bilbao, Spain, Oct. 14-18, 2018)
European Powder Metallurgy Association (EPMA).
Amor, Sabrine Ben, Zongo, Floriane, Louhichi, Borhen, Brailovski, Vladimir and Tahan, Antoine.
2021.
« Classification of dimensional deviation in additive manufacturing LPBF process for AlSi10Mg alloy according to ISO 286 and ANSI B4.2 ».
In 41st Computers and Information in Engineering Conference, CIE 2021, Held as Part of the ASME 2021 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, IDETC-CIE 2021 (En ligne, Aug. 17-19, 2021)
American Society of Mechanical Engineers (ASME).
Amor, Sabrine Ben, Zongo, Floriane, Louhichi, Borhen, Tahan, Antoine and Brailovski, Vladimir.
2022.
« Dimensional deviation prediction model based on scale and material concentration effects for LPBF process ».
In 1st International Additive Manufacturing Conference, IAM (Lisbon, Portugal, Oct. 19-20, 2022)
American Society of Mechanical Engineers.
Brailovski, V., Prokoshkin, S. D., Demers, V., Inaekyan, K. and Khmelevskaya, I. Yu.
2009.
« Property features of Ti-Ni SMA subjected to severe cold rolling and post-deformation annealing ».
In Proceedings of the International Conference on Martensitic Transformations, June 29-July 05, 2008 : ICOMAT : Santa Fe, New Mexico, USA, 2008 (Santa Fe, NM, USA, June 29-July 5, 2008)
Coll. « International Conference on Martensitic Transformations (ICOMAT) »
pp. 323-327.
Warrendale, PA, USA : TMS (The Minerals, Metals & Materials Society).
Brailovski, Vladimir, Terriault, Patrick, Prokoshkin, Sergei, Rivard, Jonathan, Simoneau, Charles and Dubinskiy, Sergei.
2014.
« Superelastic nickel-free porous materials for load-bearing medical implants: fabrication and modeling ».
In International conference on martensitic transformation (ICOMAT 2014) (Bilbao, Spain, July 6-11, 2014)
Brailovski, Vladimir, Terriault, Patrick, Simoneau, Charles, Dumas, Mathieu and Jetté, Bruno.
2017.
« Development of a biomimetic metallic femoral stem: Methodological approach ».
In International conference on processing and manufacturing of advanced materials (THERMEC) (Graz, Austria, May 29-June 03, 2016)
Coll. « Materials Science Forum », vol. 879.
pp. 1788-1793.
Trans Tech Publications.
Brummund, Martin, Brailovski, Vladimir, Facchinello, Yann, Petit, Yvan and Mac-Thiong, Jean-Marc.
2015.
« Implementation of a 3D porcine lumbar finite element model for the simulation of monolithic spinal rods with variable flexural stiffness ».
In 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (Milan, Italy, Aug. 25-29, 2015)
pp. 917-920.
Piscataway, NJ, USA : IEEE.
Demers, V., Brailovski, V., Prokoshkin, S., Inaekyan, K., Bastarash, E., Khmelevskaya, I. and Dobatkin, S..
2007.
« Functional properties of nanostructured Ti-50.0 at % Ni alloys ».
In Fatigue and Fracture of Medical Metallic Materials and Devices (Dallas, TX, USA, Nov. 01, 2005)
Coll. « ASTM Special Technical Publication », vol. 1481.
pp. 34-44.
American Society for Testing and Materials.
Dubois, P. K., Landry-Blais, A., Gazzah, R., Sivic, S., Brailovski, V. and Picard, M..
2021.
« Cooling performance of additively manufactured pin fins in stacked microchannels for the inside-out ceramic turbine shroud-cooling ring ».
In ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition : Conference Proceedings (En ligne, June 07-11, 2021)
American Society of Mechanical Engineer.
Facchinello, Yann, Brailovski, Vladimir, Petit, Yvan, Brummund, Martin, Tremblay, Jaelle and Mac-Thiong, Jean-Marc.
2015.
« In-vitro assessment of the stabilization capacity of monolithic spinal rods with variable flexural stiffness: methodology and examples ».
In 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (Milan, Italy, Aug. 25-29, 2015)
pp. 3913-3916.
Piscataway, NJ, USA : IEEE.
Facchinello, Yann, Brailovski, Vladimir, Petit, Yvan and Mac-Thiong, Jean-Marc.
2014.
« Monolithic superelastic rods with variable flexural stiffness for spinal fusion: Simplified finite element analysis of an instrumented spine segment ».
In 2014 36th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC) (Chicago, IL, USA, Aug. 26-30, 2014)
pp. 6605-6608.
Institute of Electrical and Electronics Engineers.
Fayed, Eslam, Medraj, Mamoun, Shahriari, Davood, Jahazi, Mohammad and Brailovski, Vladimir.
2019.
« Effect of heat treatment holding time on the microstructure and mechanical properties of Inconel 718 superalloy fabricated by selective laser melting ».
In Proceedings of The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019 CSME-CFDSC Congress 2019 (London, ON, Canada, June 02-05, 2019)
Western University - Department of Mechanical and Materials Engineering.
Inaekyan, Karine, Paserin, Vladimir, Bailon-Poujol, Ian and Brailovski, Vladimir.
2016.
« Binder-jetting additive manufacturing with water atomized iron powders ».
In AMPM Conference on Additive Manufacturing 2016 (Boston, MA, USA, June 05-07, 2016)
Kalinicheva, V., Sheremetyev, V., Letenneur, M., Konopatsky, A., Prokoshkin, S. and Brailovski, V..
2021.
« Effect of thermal treatment on the structure and hardness of the laser powder bed-fused Ti-Zr-Nb shape memory alloy ».
In Annual School of Young Scientists 2020: "Synthesis, Structure and Properties of High Entropy Materials" (Belgorod, Russia, Oct. 14-16, 2020)
Coll. « IOP Conference Series: Materials Science and Engineering », vol. 1014.
UK : IOP Publishing.
Kreitcberg, A., Brailovski, V. and Turenne, S..
2017.
« The build orientation-dependent ductility of IN625 alloy processed by laser powder-bed fusion ».
In 14th International Conference on Fracture (ICF 2017) (Rhodes, Greece, June 18-20, 2017)
pp. 1024-1025.
International Conference on Fracture.
Kreitcberg, A., Prokoshkin, S., Brailovski, Vladimir, Gunderov, D. and Khomutov, M..
2014.
« Influence of the strain rate and deformation temperature on the deformability of Ti-Ni SMAs: a preliminary study ».
In 6th International Conference on Nanomaterials by Severe Plastic Deformation (NanoSPD6) (Metz, France, June 30 - July 4, 2014)
Coll. « IOP Conference Series: Materials Science and Engineering », vol. 63.
IOP Publishing.
Kreitcberg, A., Sheremetyev, V., Prokoshkin, S. and Brailovski, V..
2019.
« Laser powder bed fusion of superelastic Ti-18Zr-14Nb alloy: influence of processing and post-processing conditions on structure, texture, and mechanical properties ».
In International Conference on Shape Memory and Superelastic Technologies, SMST 2019; The Bodensee Forum (Konstanz, Germany, May 13-17, 2019)
pp. 127-128.
ASM International.
Kreitcberg, Alena, Brailovski, Vladimir, Turenne, Sylvain, Chanal, Cyrille and Urlea, Victor.
2017.
« Influence of thermo- and HIP treatments on the microstructure and mechanical properties of IN625 alloy parts produced by selective laser melting : A comparative study ».
In International Conference on Processing and Manufacturing of Advanced Materials (THERMEC) (Graz, Austria, May 29-June 03, 2016)
Coll. « Materials Science Forum », vol. 879.
pp. 1008-1013.
Trans Tech Publications.
Leclercq, Aurore, Mouret, Thibault and Brailovski, Vladimir.
2024.
« Laser powder bed fusion and hot isostatic pressing of pure molybdenum: Physical and mechanical properties at elevated temperatures ».
In European Powder Metallurgy Congress and Exhibition, Euro PM (Malmo, Sweden, Sept. 29-Oct. 02, 2024)
Malmo, Sweden : European Powder Metallurgy Association (EPMA).
Letenneur, M., Brailovski, V., Moravej, M. and Aguirre, L..
2018.
« Porosity evaluation in compacted and sintered parts using the micro-tomography and metallography techniques ».
In Proceedings of the International Conference on Powder Metallurgy and Particulate Material (POWDERMET) (San Antonio, TX, USA, June 17-20, 2018)
Coll. « Advances in Powder Metallurgy and Particulate Materials »
pp. 835-844.
Metal Powder Industries Federation.
Masson, P., Micheau, P., Pasco, Y., Thomas, Marc, Brailovski, Vladimir, Meunier, M., Peter, Y.-A, Song, I.-H, Mateescu, D., Misra, A., Mrad, N. and Pinsonneault, J..
2006.
« Smart technologies for structural health monitoring of aerospace structures ».
In International Workshop on Smart Materials and Structures (CanSmart) (Toronto, ON, Canada, Oct. 12-13, 2006)
Kingston, Canada : CanSmart Group.
Nijikovsky, B., Brailovski, V., Aguirre Perales, L. Y. and Paris, V..
2020.
« Using powder rheology measurements to optimize the mixing time of iron-based premixes for best die filling performance ».
In International Conference on Powder Metallurgy and Particulate Materials (POWDERMET) (Phoenix, AZ, USA, June 23-26, 2019)
Coll. « Advances in Powder Metallurgy and Particulate Materials »
pp. 683-703.
Metal Powder Industries Federation.
Parent-Simard, T., Landry-Blais, A., Dubois, P. K., Picard, M. and Brailovski, V..
2019.
« Effect of surface roughness induced by laser powder bed fusion additive manufacturing in a mini-channel heat exchanger ».
In ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, GT 2019 (Phoenix, AZ, USA, June 17-21, 2019)
Coll. « Proceedings of the ASME Turbo Expo »
American Society of Mechanical Engineers (ASME).
Prokoshkin, S., Brailovski, Vladimir, Inaekyan, K., Demers, V., Khmelevskaya, I., Dobatkin, S. and Tatyanin, E..
2007.
« Severely cold-rolled and annealed Ti-Ni shape memory alloys : structure, transformations and functional properties ».
In Proceedings of the International Symposium Bulk Nanostructured Materials (BNM) (Ufa, Russia, Aug. 14-18, 2007)
pp. 282-283.
Prokoshkin, Sergey, Dubinskiy, Sergey and Brailovski, Vladimir.
2019.
« Features of nanosubgrained structure in deformed and annealed Ti-Ni SMA ».
In International Conference on Shape Memory and Superelastic Technologies, SMST 2019; The Bodensee Forum (Konstanz, Germany, May 13-17, 2019)
pp. 189-190.
ASM International.
Sheremetyev, V., Kudryashova, A., Derkach, M., Lukashevich, K., Andreev, V., Galkin, S., Prokoshkin, S. and Brailovski, V..
2019.
« The effect of combined thermomechanical treatment on the structure, phases and hardness of a superelastic Ti-Zr-Nb bar stock ».
In 6th International Symposium Bulk Nanomaterials: from fundamentals to innovations (BNM-2019), 25-27 Sept. 2019 (Ufa, Russia, Sept. 25-27, 2019)
Coll. « IOP Conference Series: Materials Science and Engineering », vol. 672.
IOP Publishing.
Sheremetyev, V., Kudryashova, A., Galkin, S., Andreev, V., Prokoshkin, S. and Brailovski, V..
2019.
« Superelastic Ti-Zr-Nb alloy for spinal rods: technology, microstructure, texture, and functional properties ».
In International Conference on Shape Memory and Superelastic Technologies, SMST 2019: The Bodensee Forum (Konstanz, Germany, May 13-17, 2019)
pp. 12-13.
ASM International.
Sheremetyev, Vadim A., Bonartsev, Anton P., Dubinskiy, Sergey M., Zhukova, Yulia S., Bonartseva, Garina A., Makhina, Tatiana K., Akoulina, Elizaveta A., Ivanova, Elina V., Kotlyarova, Maria S., Prokoshkin, Sergey D., Brailovski, Vladimir and Shaitan, Konstantin V..
2018.
« Surface modification of Ti-Nb-Zr foams by Poly(3-Hydroxybutyrate) ».
In 3rd International Conference on Shape Memory Alloys (SMA) 2018 (Chelyabinsk, Russia, Aug. 16-20, 2018)
Coll. « Materials Research Proceedings », vol. 9.
pp. 74-79.
Millersville : Materials Research Forum Llc.
Sheremetyev, Vadim, Prokoshkin, Sergey, Dubinskiy, Sergey, Brailovski, Vladimir and Inaekyan, Karine.
2015.
« Fatigue properties of metastable beta Ti-22Nb-6Zr (at%) alloy for load-bearing biomedical applications ».
In International Conference on Shape Memory and Superelastic Technologies, SMST 2015 (Oxfordshire, UK, May 18-22, 2015)
pp. 169-170.
Enstone Chipping Norton, Oxfordshire, United Kingdom : ASM International.
Simoneau, C., Terriault, P. and Brailovski, V..
2015.
« Modeling and additive manufacturing of open-cell random-porosity structures for biomedical applications ».
In International Conference on Porous Metals and Metallic Foams Technology (METFOAM 2015) (Barcelona, Spain, Aug. 31-Sept. 2, 2015)
Terriault, P. and Brailovski, V..
2015.
« Influence of boundary conditions on the simulation of architectured porous structures ».
In International Conference on Porous Metals and Metallic Foams Technology (METFOAM 2015) (Barcelone, Spain, Aug. 31-Sept. 2, 2015)
Terriault, Patrick, Torra, V., Fischer, C., Brailovski, Vladimir and Isalgue, A..
2007.
« Superelastic shape memory alloy damper equipped with a passive adaptable pre-straining mechanism ».
In 9th Canadian Conference on Earthquake Engineering (CCEE) (Ottawa, ON, Canada, June 26-29, 2007)
pp. 1489-1496.
Terriault, Patrick, Trochu, Francois and Brailovski, Vladimir.
1999.
« Tensorial generalization of a phenomenological material law for shape memory alloys ».
In International Workshop on Nondestructive Testing and Computer Simulations in Science and Engineering (St. Petersburg, Russia, June 08-12, 1998)
Coll. « Proceedings of SPIE », vol. 3687.
pp. 313-323.
SPIE.
Trochu, F., Hilal, S., Huang, W., Sun, Y., Causse, P. and Brailovski, V..
2018.
« Reconstruction and data compression of three-dimensional composite fiber architecture from microtomographic images ».
In 7th International Symposium on Air/Craft Materials (ACMA) (Compiègne, France, Apr. 24-26, 2018)
Vachon, Pierre-Luc, Brailovski, Vladimir and Terriault, Patrick.
2010.
« Suppression of delamination propagation in carbon/epoxy laminates by use of superelastic stitching wires : preliminary results ».
In Proceedings of the Eighth Joint Canada-Japan Workshop on Composites : Design, Manufacturing and Applications of Composites (Montréal, Canada, July 26-28, 2010)
pp. 286-296.
Lancaster, Pa., USA : DEStech Publications, inc..
Zhukova, Yulia, Pustov, Yury, Sheremetyev, Vadim, Konopatsky, Anton, Filonov, Mikhail and Brailovski, Vladimir.
2015.
« Electrochemical characterization of oxidized nanostructured superelastic Ti-Nb-Zr alloy for medical implants ».
In ESOMAT 2015 – 10th European Symposium on Martensitic Transformations (Antwerp, Belgium, Sept. 14-18, 2015)
Coll. « MATEC Web of Conferences », vol. 33.
EDP Sciences. Book
Brailovski, Vladimir and Prokoshkin, Sergei and Terriault, Patrick and Trochu, F., éds.
2003.
« Shape memory alloys : fundamentals, modeling and applications ».
Montreal, Canada : École de technologie supérieure. 844 p. Book chapter
Brailovski, Vladimir.
2003.
« Stress-strain diagrams ».
In
Shape memory alloys : fundamentals, modeling and applications.
pp. 179-210. Montréal, Canada : École de technologie supérieure.
Brailovski, Vladimir.
2003.
« Recovery strain and shape recovery rate ».
In
Shape memory alloys : fundamentals, modeling and applications.
pp. 211-232. Montréal, Canada : École de technologie supérieure.
Brailovski, Vladimir and Prokoshkin, Sergei.
2003.
« Principles of optimization of thermomechanical treatment ».
In
Shape memory alloys : fundamentals, modeling and applications.
pp. 527-548. Montréal, Canada : École de technologie supérieure.
Brailovski, Vladimir, Prokoshkin, S., Terriault, Patrick and Trochu, F..
2003.
« Historical summary ».
In
Shape memory alloys : fundamentals, modeling and applications.
pp. 3-8. Montréal, Canada : École de technologie supérieure.
Brailovski, Vladimir, Turenne, S. and Trochu, F..
2003.
« Fatigue and degradation of SME ».
In
Shape memory alloys : fundamentals, modeling and applications.
pp. 311-342. Montréal, Canada : École de technologie supérieure.
Piron, D. L. and Brailovski, Vladimir.
2003.
« Corrosion and its prevention in shape memory alloys ».
In
Shape memory alloys : fundamentals, modeling and applications.
pp. 343-402. Montréal, Canada : École de technologie supérieure.
Turenne, S. and Brailovski, Vladimir.
2003.
« Characterization of shape memory alloys ».
In
Shape memory alloys : fundamentals, modeling and applications.
pp. 131-178. Montréal, Canada : École de technologie supérieure.
Brailovski, V. and Terriault, P..
2016.
« Metallic porous materials for orthopedic implants: functional requirements, manufacture, characterization, and modeling ».
In
Reference Module in Materials Science and Materials Engineering.
Elsevier.
Poulin, Jean-René, Letenneur, Morgan, Terriault, Patrick and Brailovski, Vladimir.
2020.
« Influence of intentionally induced porosity and postprocessing conditions on the mechanical properties of laser powder bed–fused Inconel 625 ».
In
Structural Integrity of Additive Manufactured Parts.
pp. 294-312. West Conshohocken, PA : ASTM International.
Prokoshkin, Sergey, Brailovski, Vladimir, Inaekyan, Karine, Korotitskiy, Andrey and Kreitcberg, Alena.
2015.
« Thermomechanical treatment of TiNi intermetallic-based shape memory alloys ».
In
Shape Memory Alloys: Properties, Technologies, Opportunities.
Coll. « Foundations of Materials Science and Engineering », vol. 81-82.
pp. 342-405. Pfäffikon, Switzerland : Trans Tech Publications. Non-peer reviewed article published in a journal or magazine
Facchinello, Yann, Brummund, Martin, Mac-Thiong, Jean-Marc, Petit, Yvan and Brailovski, Vladimir.
22 August 2016.
« Optimiser les implants vertébraux par modélisation ».
[Research article]. Substance ÉTS.
Facchinello, Yann, Brummund, Martin, Mac-Thiong, Jean-Marc, Petit, Yvan and Brailovski, Vladimir.
22 August 2016.
« Optimizing Spinal Implants through Modeling ».
[Research article]. Substance ÉTS.
Jetté, Bruno, Fréchette, Guillaume, Guillemette, Olivier, Gaudreau, Robin, Simoneau, Charles, Terriault, Patrick and Brailovski, Vladimir.
19 August 2015.
« Comment prolonger la durée de vie des prothèses de la hanche? ».
[Research article]. Substance ÉTS.
Jetté, Bruno, Fréchette, Guillaume, Guillemette, Olivier, Gaudreau, Robin, Simoneau, Charles, Terriault, Patrick and Brailovski, Vladimir.
19 August 2015.
« Increasing Hip Prostheses’ Lifespan ».
[Research article]. Substance ÉTS.
Jetté, Bruno, Letenneur, Morgan, Samoilenko, Mykhalio and Brailovski, Vladimir.
7 June 2016.
« Making the Most of Additive Manufacturing: Facing the Challenge ».
[Research article]. Substance ÉTS.
Jetté, Bruno, Letenneur, Morgan, Samoilenko, Mykhalio and Brailovski, Vladimir.
7 June 2016.
« Tirer profit de la fabrication additive : un défi à relever ».
[Research article]. Substance ÉTS.
Pelletier, Vincent, Petit, Yvan, Brailovski, Vladimir, Denis, Ronald, Studer, Anne-Sophie and Wagnac, Éric.
15 November 2017.
« Imprimer un estomac 3D pour mieux éduquer en chirurgie bariatrique ».
[Research article]. Substance ÉTS.
Pelletier, Vincent, Petit, Yvan, Brailovski, Vladimir, Denis, Ronald, Studer, Anne-Sophie and Wagnac, Éric.
15 November 2017.
« Printing a 3D Stomach Teaching Tool for Bariatric Surgery ».
[Research article]. Substance ÉTS.
Poulin, Jean-René, Barry, David and Brailovski, Vladimir.
14 October 2016.
« Additive Manufacturing of Argon 18’s Olympic Race Bike Stem ».
[Research article]. Substance ÉTS.
Poulin, Jean-René, Barry, David and Brailovski, Vladimir.
14 October 2016.
« Fabrication additive d’une potence pour un vélo olympique d’Argon 18 ».
[Research article]. Substance ÉTS.
Timercan, Anatolie, Brailovski, Vladimir, Lussier, Bertrand, Petit, Yvan and Seguin, Bernard.
8 May 2018.
« 3D Printed Personalized Canine Prostheses ».
[Research article]. Substance ÉTS.
Timercan, Anatolie, Brailovski, Vladimir, Lussier, Bertrand, Petit, Yvan and Seguin, Bernard.
8 May 2018.
« Prothèses canines personnalisées imprimées en 3D ».
[Research article]. Substance ÉTS.
PosterCanet, Fanny, Baril, Yannick, Bissonnette, Guillaume, Brailovski, Vladimir, Petit, Yvan and Laflamme, Georges-Yves. 2010. « A new superelastic cable for bone fixation in trauma : comparison with commonly used orthopaedic cables ». Affiche numéro 26570 présentée lors de la conférence : 7th SICOT / SIROT Annual International Conference (Gothenburg, Sweden, Aug. 31-Sept. 3, 2010). Duke, Kajsa, Laflamme, Georges-Yves, Brailovski, Vladimir, Bourgeois, Yan, Toueg, Charles, Levasseur, Annie and Petit, Yvan. 2009. « Greater trochanter reattachment : experimental evaluation of cable tension and displacement during walking ». Affiche présentée lors de la conférence : Annual Meeting of the American Society of Biomechanics (State College, PA, August 26-29, 2009). Tremblay, J., Levasseur, A., Petit, Yvan, Mac-Thiong, J. M. and Brailovski, Vladimir. 2011. « Impact des conditions aux frontières sur le comportement biomécanique d'un segment vertébral : résultats préliminaires ». Affiche numéro 68 présentée lors de la conférence : 31e Journée de la Recherche : Programme d'Orthopédie Édouard-Samson (POES) (Montréal, Canada, 6 mai 2011). Dumas, Mathieu, Terriault, Patrick and Brailovski, Vladimir. 2016. « Modeling and simulation of porous structures for load-bearing implants ». Affiche numéro P.0892 présentée lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016). Lafreniere, Jerome, Brailovski, Vladimir, Timercan, Anatolie, Poirier, Michel and Wagnac, Éric. 2016. « Manufacturability of custom endosteal dental implants by selective laser melting ». Affiche présentée lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016). Le Bras, Linh-Aurore, Timercan, Anatolie, Lussier, Bertrand, Séguin, Bernard, Petit, Yvan and Brailovski, Vladimir. 2021. « Novel limb sparing technique using 3D-printed patient-specific endoprostheses for tumors of the proximal humerus ». Affiche numéro 47 présentée lors de la conférence : 4th HI-AM Conference (En ligne, June 01-02, 2021). Lussier, Bertrand, Brailovski, Vladimir, Petit, Yvan, Lecoq, Thomas, Brummund, Martin, Timercan, Anatolie and Séguin, Bernard. 2016. « Novel limb sparing technique using customized 3D printed patient-specific endoprostheses for tumors of the distal radius ». Affiche numéro 24 présentée lors de la conférence : ACVS Surgery Summit (Seattle, WA, USA, Oct. 05-08, 2016). Samoilenko, Mykhailo, Seers, Patrice, Terriault, Patrick and Brailovski, Vladimir. 2019. « Design, manufacture and testing of porous materials with ordered and random porosity: Application to porous medium burner ». Affiche numéro 35 présentée lors de la conférence : 2nd HI-AM Conference : Holistic Innovation In Additive Manufacturing (Vancouver, BC, Canada, June 26-27, 2019). Simoneau, C., Terriault, P. and Brailovski, V.. 2015. « Modeling and additive manufacturing of open-cell random-porosity structures for biomedical applications ». Affiche numéro P-34 présentée lors de la conférence : International Conference on Porous Metals and Metallic foams Technology (METFOAM 2015) (Barcelona, Spain, Aug. 31-Sept. 2, 2015). Simoneau, Charles, Terriault, Patrick and Brailovski, Vladimir. 2016. « Stochastic porous metallic structures for biomedical application: mesoscale modeling, manufacturing and testing ». Affiche numéro P.0927 présentée lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016). Terriault, P. and Brailovski, V.. 2015. « Influence of boundary conditions on the simulation of architectured porous structures ». Affiche numéro P-101 présentée lors de la conférence : International Conference on Porous Metals and Metallic foams Technology (METFOAM 2015) (Barcelone, Spain, Aug. 31-Sept. 2, 2015). Tremblay, Jaëlle, Mac-Thiong, Jean-Marc, Brailovski, Vladimir and Petit, Yvan. 2012. « Évaluation d'un nouveau montage expérimental pour l'évaluation biomécanique in vitro de la colonne vertébrale ». Affiche numéro 105 présentée lors de la conférence : 32e Journée de la Recherche du POES et de la Division d'Orthopédie de l'Université de Montréal (Montréal, QC, Canada, May 11, 2012). CommunicationBaril, Yannick, Brailovski, Vladimir, Bourgeois, Yan, Laflamme, Georges-Yves and Petit, Yvan. 2010. « Comparaison biomécanique entre deux systèmes de rattachement du grand trochanter ». Communication lors de la conférence : 30e Journée de la Recherche, Programme d'Orthopédie Édouard-Samson (POES) (Montréal, Québec, Canada, 7 mai 2010). Bissonnette, Guillaume, Canet, Fanny, Baril, Yannick, Brailovski, Vladimir, Petit, Yvan and Laflamme, Georges-Yves. 2010. « Nouveau câble iso-élastique : comparaison avec les câbles couramment utilisés en orthopédie ». Communication lors de la conférence : 30e Journée de la Recherche, Programme d'Orthopédie Édouard-Samson (POES) (Montréal, Québec, Canada, 7 mai 2010). Tremblay, J., Mac-Thiong, J.-M., Brailovski, Vladimir and Petit, Yvan. 2011. « Évaluation d’un nouveau montage expérimental pour l’évaluation biomécanique in vitro de la colonne vertébrale ». Communication lors de la conférence : 41e Journée Annuelle de la Société de la Scoliose du Québec (Québec, QC, Canada, 27-29 oct. 2011). Duke, K., Petit, Yvan, Brailovski, Vladimir, Bourgeois, Yan, Toueg, C. and Laflamme, Georges-Yves. 2009. « Fixation du grand trochanter : évaluation expérimentale du serrage des câbles et des déplacements du grand trochanter durant la marche ». Communication lors de la conférence : 29e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 24 avril 2009). Brailovski, Vladimir. 2008. « Pecularities of the structure and properties of nanostructured Ti-Ni alloy subjected to the thermomechanical processing ». Communication lors de la conférence : International Conference "Strength of the Heterogeneous Structures" (PROST) (Moscou, Russia, Apr. 8-10, 2008). Brailovski, Vladimir. 2008. « Manufacturing of nanostructured Ti-Ni shape memory alloys ». Communication lors de la conférence : International Conference Strength of the Heterogeneous Structures (PROST) (Moscou, Russia, Apr. 8-10, 2008). Bourgeois, Y., Duke, K., Laflamme, G.-Y., Brailovski, Vladimir and Petit, Yvan. 2008. « Évaluation expérimentale du déplacement du grand trochanter après fixation avec plaques ». Communication lors de la conférence : 28e Journée de la Recherche du Programme d'Orthopédie Édouard-Samson (POES) (Montréal, QC, Canada, 30 mai 2008). Brailovski, Vladimir, Prokoshkin, S., Inaekyan, K. and Dubinskiy, S.. 2012. « Influence of omega-phase precipitation hardening on the static and dynamic properties of beta Ti-Nb-Zr(Ta) alloys ». Communication lors de la conférence : European Symposium on Martensitic Transformations (ESOMAT) (Saint-Petersburg, Russia, Sept. 2-6, 2012). Dubinskiy, S., Brailovski, Vladimir, Inaekyan, K. and Prokoshkin, S.. 2012. « In-situ X-ray study of phase transformation in Ti-Nb-based SMA under variable stress-temperature conditions ». Communication lors de la conférence : European Symposium on Martensitic Transformations (ESOMAT) (Saint-Petersburg, Russia, Sept. 2-6, 2012). Terriault, Patrick, Brailovski, Vladimir and Settouane, K.. 2002. « The benefits of using phenomenological material laws in finite element modeling of SMA structures ». Communication lors de la conférence : 3rd World Conference on Structural Control (Como, Italia, Apr., 2002). Makarenkov, D. Yu., Brailovski, Vladimir and Trochu, F.. 2000. « Calculation of recovery strain in a textured TiNi sheet ». Communication lors de la conférence : International Meeting New Materials and New Technologies in New Millennium (Crimea, Ukraine, Sept. 19-23, 2000). Brummund, M., Brailovski, V., Petit, Y., Facchinello, Y. and Mac-Thiong, J. M.. 2015. « Influence of spinal instrumentation stiffness on the mobility of porcine lumbar spine ». Communication lors de la conférence : 13th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (Montreal, QC, Canada, Sept. 01-05, 2015). Diotalevi, L., Petit, Y., Brailovski, V., Nichols, S., Marhionatti, E. and Wagnac, E.. 2016. « Conception d'une prothèse innovante pour stabiliser le genou (grasset) bovin adulte suite à une rupture du ligament croisé cranial (LCC) ». Communication lors de la conférence : 36e Journée de la Recherche du POES et de la Division d'Orthopédie de l'Université de Montréal (Montréal, QC, Canada, 12 mai 2016). Émard, Maxime, Canet, Fanny, Baril, Yannick, Brailovski, Vladimir, Petit, Yvan and Laflamme, G.-Yves. 2012. « Étude biomécanique de la fixation par cerclage de l'ostéotomie étendue du grand trochanter ». Communication lors de la conférence : 32e Journée de la Recherche du POES et de la Division d'Orthopédie de l'Université de Montréal (Montreal, QC, Canada, May 11, 2012). Facchinello, Y., Brailovski, V., Petit, Y., Brummund, M. and Mac-Thiong, J. M.. 2015. « Tiges monolithiques aux propriétés variables pour la stabilisation de la colonne vertébrale : étude biomécanique ». Communication lors de la conférence : 45e Réunion Annuelle de la Société de Scoliose du Québec (St-Sauveur, QC, Canada, 15-17 oct. 2015). Lafreniere, Jerome, Brailovski, Vladimir, Timercan, Anatolie, Poirier, Michel and Wagnac, Éric. 2016. « Manufacturability of custom endosteal dental implants by selective laser melting ». Communication lors de la conférence : 10th World Biomaterials Congress (WBC) (Montréal, QC, Canada, May 17-22, 2016). Poulin, Jean-Rene, Terriault, Patrick and Brailovski, Vladimir. 2019. « Implementation of the kitagawa-takahashi approach for prediction of fatigue limit of inconel 625 components containing intentionally-seeded defects ». Communication lors de la conférence : 2nd HI-AM Conference : Holistic Innovation In Additive Manufacturing (Vancouver, BC, Canada, June 26-27, 2019). PatentsBrailovski, Vladimir, Cartier, Raymond, Terriault, Patrick and Baril, Yannick (inventeurs) 13 November 2012. « Binding component ». École de technologie supérieure (titulaire(s)). Brevet américain US 8,308,761. Baril, Yannick, Brailovski, Vladimir, Cartier, Raymond and Terriault, Patrick (inventeurs) 17 December 2013. « Binding component ». École de technologie supérieure (titulaire(s)). Brevet canadien CA 2587737. [Titre traduit: Composant de liaison]. |
![[up]](/style/images/multi_up.png)
Up a level