| La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS |
| ENGLISH |
Document quand le type de document est "Article publié dans une revue, révisé par les pairs" et l'année est 2012Nombre de documents archivés : 344.
Abdellatif, Iheb et April, Alain.
2012.
« Multiperspective Representation of Internal Controls in Business Processes ».
Journal of Software Engineering and Applications, vol. 5, nº 12.
pp. 971-982.
Abed, Mansour, Belouchrani, Adel, Cheriet, Mohamed et Boashash, Boualem.
2012.
« Time-frequency distributions based on compact support kernels: properties and performance evaluation ».
IEEE Transactions on Signal Processing, vol. 60, nº 6.
pp. 2814-2827.
Abenhaim, Gad Noriel, Desrochers, Alain et Tahan, Antoine.
2012.
« Nonrigid parts' specification and inspection methods: notions, challenges, and recent advancements ».
International Journal of Advanced Manufacturing Technology, vol. 63, nº 5-8.
pp. 741-752.
Abran, Alain, Desharnais, Jean-Marc et Cuadrado-Gallego, Juan Jose.
2012.
« Measurement and quantification are not the same: ISO 15939 and ISO 9126 ».
[Article de conférence]. Journal of Software: Evolution and Process, vol. 24, nº 5.
pp. 585-601.
Abualkishik, Abedallah Zaid, Desharnais, Jean-Marc, Khelifi, Adel, Ghani, Abdul Azim Abd, Atan, Rodziah et Selamat, Mohd Hasan.
2012.
« An exploratory study on the accuracy of FPA to COSMIC measurement method conversion types ».
Information and Software Technology, vol. 54, nº 11.
pp. 1250-1264.
Acevedo Agudelo, Harlem, Vásquez Hernández, Alejandro et Ramírez Cardona, Diego Alejandro.
2012.
« Sostenibilidad: Actualidad y necesidad en el sector de la construcción en Colombia ».
Gestión y Ambiente, vol. 15, nº 1.
pp. 105-118.
Ahmadi, Ali, Devlin, Kurt D. et Hoorfar, Mina.
2012.
« Numerical study of the microdroplet actuation switching frequency in digital microfluidic biochips ».
Microfluidics and Nanofluidics, vol. 12, nº 1-4.
pp. 295-305.
Aidibe, Ali, Tahan, Antoine S. et Abenhaim, Gad N..
2012.
« Distinguishing profile deviations from a part's deformation using the maximum normed residual test ».
WSEAS Transactions on Applied and Theoretical Mechanics, vol. 7, nº 1.
pp. 18-28.
Al Hadi, Richard, Sherry, Hani, Grzyb, Janusz, Zhao, Yan, Förster, Wolfgang, Keller, Hans M., Cathelin, Andreia, Kaiser, Andreas et Pfeiffer, Ullrich R..
2012.
« A 1 k-pixel video camera for 0.7-1.1 terahertz imaging applications in 65-nm CMOS ».
IEEE Journal of Solid-State Circuits, vol. 47, nº 12.
pp. 2999-3012.
Alaie, Hesam Farsaie et Tadj, Chakib.
2012.
« Cry-Based Classification of Healthy and Sick Infants Using Adapted Boosting Mixture Learning Method for Gaussian Mixture Models ».
Modelling and Simulation in Engineering, vol. 2012.
Ameur, Khaled et Masson, Christian.
2012.
« Effects of terrain slope on nacelle anemometry ».
Journal of Solar Energy Engineering, vol. 134, nº 3.
André, Sabine, Cañada, F. Javier, Shiao, Tze Chieh, Largartera, Laura, Diercks, Tammo, Bergeron-Brlek, Milan, el Biari, Khouzaima, Papadopoulos, Alex, Ribeiro, Joao P., Touaibia, Mohamed, Solís, Dolores, Menéndez, Margarita, Jiménez-Barbero, Jesús, Roy, René et Gabius, Hans-Joachim.
2012.
« Fluorinated carbohydrates as lectin ligands: Biorelevant sensors with capacity to monitor anomer affinity in 19F-NMR-based inhibitor screening ».
European Journal of Organic Chemistry, vol. 2012, nº 23.
pp. 4354-4364.
Angue Mintsa, Honorine, Venugopal, Ravinder, Kenné, Jean-Pierre et Belleau, Christian.
2012.
« Feedback linearization-based position control of an electrohydraulic servo system with supply pressure uncertainty ».
IEEE Transactions on Control Systems Technology, vol. 20, nº 4.
pp. 1092-1099.
Asami, T., Bouix, S., Whitford, T. J., Shenton, M. E., Salisbury, D. F. et McCarley, R. W..
2012.
« Longitudinal loss of gray matter volume in patients with first-episode schizophrenia: DARTEL automated analysis and ROI validation ».
NeuroImage, vol. 59, nº 2.
pp. 986-996.
Badache, M., Hallé, S. et Rousse, D..
2012.
« A full 3^4 factorial experimental design for efficiency optimization of an unglazed transpired solar collector prototype ».
Solar Energy, vol. 86, nº 9.
pp. 2802-2810.
Badache, Messaoud, Rousse, Daniel R., Hallé, Stéphane, Quesada, Guillermo et Dutil, Yvan.
2012.
« Experimental and Two-dimensional Numerical Simulation of an Unglazed Transpired Solar Air Collector ».
[Article de conférence]. Energy Procedia, vol. 30.
pp. 19-28.
Badarneh, Osamah S. et Kadoch, Michel.
2012.
« Video multicast over wireless ad hoc networks ».
WSEAS Transactions on Communications, vol. 11, nº 1.
pp. 37-56.
Badri, A., Nadeau, S. et Gbodossou, A..
2012.
« A mining project is a field of risks: A systematic and preliminary portrait of mining risks ».
International Journal of Safety and Security Engineering, vol. 2, nº 2.
pp. 145-166.
Badri, Adel, Gbodossou, André et Nadeau, Sylvie.
2012.
« Occupational health and safety risks: Towards the integration into project management ».
Safety Science, vol. 50, nº 2.
pp. 190-198.
Badri, Adel, Nadeau, Sylvie et Gbodossou, André.
2012.
« Proposal of a risk-factor-based analytical approach for integrating occupational health and safety into project risk evaluation ».
Accident Analysis and Prevention, vol. 48.
pp. 223-234.
Badri, B., Thomas, Marc et Sassi, S..
2012.
« The envelop shock detector: A new method for processing impulsive signals ».
International Journal of COMADEM, vol. 15, nº 3.
pp. 29-38.
Baraër, Michel, Mark, Bryan G., Mckenzie, Jeffrey M., Condom, Thomas, Bury, Jeffrey, Huh, Kyung-In, Portocarrero, Cesar, Gómez, Jesús et Rathay, Sarah.
2012.
« Glacier recession and water resources in Peru’s Cordillera Blanca ».
Journal of Glaciology, vol. 58, nº 207.
pp. 134-150.
Baril, Y., Bourgeois, Y., Brailovski, V., Duke, K., Laflamme, G. Y. et Petit, Y..
2012.
« Testing system for the comparative evaluation of greater Trochanter re-attachment devices ».
Experimental Techniques, vol. 36, nº 4.
pp. 74-82.
Basbous, Tammam, Younes, Rafic, Ilinca, Adrian et Perron, Jean.
2012.
« A new hybrid pneumatic combustion engine to improve fuel consumption of wind-Diesel power system for non-interconnected areas ».
Applied Energy, vol. 96.
pp. 459-476.
Basbous, Tammam, Younes, Rafic, Ilinca, Adrian et Perron, Jean.
2012.
« Fuel consumption evaluation of an optimized new hybrid pneumatic-combustion vehicle engine on several driving cycles ».
International Journal of Engine Research, vol. 13, nº 3.
pp. 253-273.
Basbous, Tammam, Younes, Rafic, Ilinca, Adrian et Perron, Jean.
2012.
« Pneumatic hybridization of a diesel engine using compressed air storage for wind-diesel energy generation ».
Energy, vol. 38, nº 1.
pp. 264-275.
Basbous, Tammam, Younes, Rafic, Ilinca, Adrian et Perron, Jean.
2012.
« Required time response of a variable valve actuator equiping a hybrid pneumatic–combustion engine ».
International Journal of Engine Research, vol. 13, nº 5.
pp. 514-528.
Batista, L., Granger, E. et Sabourin, R..
2012.
« Dynamic selection of generative-discriminative ensembles for off-line signature verification ».
Pattern Recognition, vol. 45, nº 4.
pp. 1326-1340.
Bautista, Luis, Abran, Alain et April, Alain.
2012.
« Design of a Performance Measurement Framework for Cloud Computing ».
Journal of Software Engineering and Applications, vol. 5, nº 2.
pp. 69-75.
Ben Ayed, Ismail, Chen, Hua-mei, Punithakumar, Kumaradevan, Ross, Ian et Li, Shuo.
2012.
« Max-flow segmentation of the left ventricle by recovering subject-specific distributions via a bound of the Bhattacharyya measure ».
Medical Image Analysis, vol. 16, nº 1.
pp. 87-100.
Ben Salah, Mohamed, Ben Ayed, Ismail et Mitiche, Amar.
2012.
« Active curve recovery of region boundary patterns ».
IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 34, nº 5.
pp. 834-849.
Ben Tagherouit, Wided et Bennis, Saad.
2012.
« Le « goal programming » pour l’optimisation de la planification de la réhabilitation des réseaux d’égout ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 39, nº 2.
pp. 223-236.
Benelmir, R., Merabtine, A. et Descieux, D..
2012.
« Energy tri-generation: Combined gas cogeneration/solar cooling ».
International Journal of Thermal and Environmental Engineering, vol. 4, nº 2.
pp. 157-163.
Bensoussan, David.
2012.
« Simultaneous improvement of time and frequency performance ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 45, nº 13.
pp. 162-167.
Bergeron-Brlek, Milan, Giguère, Denis, Shiao, Tze Chieh, Saucier, Catherine et Roy, René.
2012.
« Palladium-catalyzed ullmann-type reductive homocoupling of iodoaryl glycosides ».
Journal of Organic Chemistry, vol. 77, nº 6.
pp. 2971-2977.
Bernier, Antoine et Voix, Jérémie.
2012.
« Une nouvelle protection auditive adaptée aux musiciens ».
Musique et pédagogie, vol. 26, nº 1.
pp. 39-41.
Berthiaume, Vincent et Cheriet, Mohamed.
2012.
« Handwritten digit recognition by fourier-packet descriptors ».
Electronic Letters on Computer Vision and Image Analysis, vol. 11, nº 1.
pp. 68-76.
Bigras, P., Lambert, M. et Perron, C..
2012.
« Robust force controller for industrial robots: optimal design and real-time implementation on a KUKA robot ».
IEEE Transactions on Control Systems Technology, vol. 20, nº 2.
pp. 473-479.
Birafane, A., Aflaki, P., Kouki, A. B. et Ghannouchi, F. M..
2012.
« Enhanced DC model for GaN HEMT transistors with built-in thermal and trapping effects ».
Solid-State Electronics, vol. 76.
pp. 77-83.
Blanchard, F., Ooi, K., Tanaka, T., Doi, A. et Tanaka, K..
2012.
« Terahertz spectroscopy of the reactive and radiative near-field zones of split ring resonator ».
Optics Express, vol. 20, nº 17.
pp. 19395-19403.
Blanchette, H. F., Ould-Bachir, T. et David, J. P..
2012.
« A state-space modeling approach for the FPGA-based real-time simulation of high switching frequency power converters ».
IEEE Transactions on Industrial Electronics, vol. 59, nº 12.
pp. 4555-4567.
Blum, Guillaume.
2012.
« De la liberté du logiciel et de son ouverture : Tour d’horizon et perspectives ».
Télescope, vol. 18, nº 1-2.
pp. 121-138.
Bonenfant, Danielle, Mimeault, Murielle, Niquette, Patrick et Hausler, Robert.
2012.
« Adsorption study of a commonly used antidepressant drug, fluoxetine hydrochloride, onto a crosslinked-cyclodextrin-carboxymethylcellulose polymer ».
Water Science and Technology, vol. 66, nº 1.
pp. 224-230.
Botez, Ruxandra, Hiliuta, Adrian, Stathopoulos, Nicholas, Thérien, Sylvain, Rathé, Alexandre et Dickinson, Martin.
2012.
« Aeroservoelastic flutter and frequency response interactions on the CL-704 aircraft ».
INCAS Bulletin, vol. 4, nº 4.
pp. 41-56.
Boudreault, Jean-Philippe, Dubé, Jean-Sébastien, Sona, Mirela et Hardy, Eric.
2012.
« Analysis of procedures for sampling contaminated soil using Gy's Sampling theory and practice ».
Science of the Total Environment, vol. 425.
pp. 199-207.
Boukehili, Hychem et Nguyen-Tri, Phuong.
2012.
« Helium gas barrier and water absorption behavior of bamboo fiber reinforced recycled polypropylene ».
Journal of Reinforced Plastics and Composites, vol. 31, nº 23.
pp. 1638-1651.
Boukhattem, L., Radouane, A., Bendou, A., Hamdi, H. et Rousse, D..
2012.
« Effets du nombre de rayonnement et du rapport de température sur les transferts couplés de chaleur à travers un bâtiment ».
Revue Internationale d'Héliotechnique, nº 44.
pp. 35-42.
Boyer, Stéphane, Robert, Jean-Marc, Otrok, Hadi et Rousseau, Clément.
2012.
« An adaptive tit-for-tat strategy for IEEE 802.11 CSMA/CA protocol ».
International Journal of Security and Networks, vol. 7, nº 2.
pp. 95-106.
Breton, Simon-Philippe, Watters, Christophe Sibuet, Masson, Christian, Gomez-Iradi, Sugoi et Munduate, Xabier.
2012.
« On the prediction of tip vortices in the near wake of the MEXICO rotor using the actuator surface method ».
International Journal of Engineering Systems Modelling and Simulation, vol. 4, nº 1-2.
pp. 11-26.
Brière-Côté, Antoine, Rivest, Louis et Maranzana, Roland.
2012.
« Comparing 3D CAD models: Uses, methods, tools and perspectives ».
Computer-Aided Design and Applications, vol. 9, nº 6.
pp. 771-794.
Brlek, Srecko, Labbé, Jean-Philippe et Mendès France, Mendès.
2012.
« Combinatorial variations on Cantor's diagonal ».
Journal of Combinatorial Theory. Series A, vol. 119, nº 3.
pp. 655-667.
Broustail, G., Halter, F., Seers, P., Moreac, G. et Mounaim-Rousselle, C..
2012.
« Comparison of regulated and non-regulated pollutants with iso-octane/butanol and iso-octane/ethanol blends in a port-fuel injection Spark-ignition engine ».
Fuel, vol. 94.
pp. 251-261.
Brummund, Martin K., Sgard, Franck, Petit, Yvan et Laville, Frédéric.
2012.
« On the influence of the material properties of the external ear on occlusion effect simulations ».
[Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 40, nº 3.
pp. 110-111.
Butelle, Franck et Coti, Camille.
2012.
« Data coherency in distributed shared memory ».
[Article de conférence]. International Journal of Networking and Computing, vol. 2, nº 1.
pp. 117-130.
Calvao, Patricia S., Chenal, Jean-Marc, Gauthier, Catherine, Demarquette, Nicole R., Bogner, Agnes et Cavaille, Jean Yves.
2012.
« Understanding the mechanical and biodegradation behaviour of poly(hydroxybutyrate)/rubber blends in relation to their morphology ».
Polymer International, vol. 61, nº 3.
pp. 434-441.
Campolina, B., Dauchez, N., Atalla, N. et Doutres, O..
2012.
« Effect of porous material compression on the sound transmission of a covered single leaf panel ».
Applied Acoustics, vol. 73, nº 8.
pp. 791-797.
Caouette, C., Bureau, M. N., Vendittoli, P. A., Lavigne, M. et Nuno, N..
2012.
« Anisotropic bone remodeling of a biomimetic metal-on-metal hip resurfacing implant ».
Medical Engineering and Physics, vol. 34, nº 5.
pp. 559-565.
Caron, France et Savard, Geneviève.
2012.
« Une expérience avec l’exponentielle ».
[Article de conférence]. Bulletin AMQ, vol. LII, nº 3.
pp. 24-41.
Causse, Philippe, Ruiz, Edu et Trochu, François.
2012.
« Spring-in behavior of curved composites manufactured by Flexible Injection ».
Composites Part A: Applied Science and Manufacturing, vol. 43, nº 11.
pp. 1901-1913.
Chaabane, Amin, Ramudhin, Amar et Paquet, Marc.
2012.
« Design of sustainable supply chains under the emission trading scheme ».
International Journal of Production Economics, vol. 135, nº 1.
pp. 37-49.
Chabrot, Pascal, Fatimi, Ahmed, Fraine, Patrizio Delli, Ouchchane, Lemlih, Dauplat, Marie-Mélanie, Rivard, Alain, Lerouge, Sophie et Soulez, Gilles.
2012.
« Embolization and endothelial ablation with chitosan and sodium sotradecol sulfate: preliminary results in an animal model ».
Journal of Endovascular Therapy, vol. 19, nº 3.
pp. 439-449.
Chahal, Daljeet, Ahmadi, Ali et Cheung, Karen C..
2012.
« Improving piezoelectric cell printing accuracy and reliability through neutral buoyancy of suspensions ».
Biotechnology and Bioengineering, vol. 109, nº 11.
pp. 2932-2940.
Chaibi, Y., Cresson, T., Aubert, B., Hausselle, J., Neyret, P., Hauger, O., de Guise, J. A. et Skalli, W..
2012.
« Fast 3D reconstruction of the lower limb using a parametric model and statistical inferences and clinical measurements calculation from biplanar X-rays ».
Computer Methods in Biomechanics and Biomedical Engineering, vol. 15, nº 5.
pp. 457-466.
Chamanfar, A., Jahazi, M., Gholipour, J., Wanjara, P. et Yue, S..
2012.
« Maximizing the integrity of linear friction welded Waspaloy ».
Materials Science and Engineering: A, vol. 555.
pp. 117-130.
Chamanfar, A., Jahazi, M., Gholipour, J., Wanjara, P. et Yue, S..
2012.
« Suppressed liquation and microcracking in linear friction welded WASPALOY ».
Materials and Design, vol. 36.
pp. 113-122.
Charbonneau, Cindy, Ruiz, Juan-Carlos, Lequoy, Pauline, Hebert, Marie-Josee, De Crescenzo, Gregory, Wertheimer, Michael R. et Lerouge, Sophie.
2012.
« Chondroitin sulfate and epidermal growth factor immobilization after plasma polymerization: A versatile anti-apoptotic coating to promote healing around stent grafts ».
Macromolecular Bioscience, vol. 12, nº 6.
pp. 812-821.
Chatelain, B., Laperle, C., Roberts, K., Chagnon, M., Xian, Xu, Borowiec, A., Gagnon, F. et Plant, D. V..
2012.
« A family of Nyquist pulses for coherent optical communications ».
Optics Express, vol. 20, nº 8.
pp. 8397-8416.
Chatelain, Jean-François.
2012.
« A university-industry research collaboration for the optimization of the machining process of multilayer materials for the aerospace industry ».
Journal of Management and Engineering Integration, vol. 5, nº 1.
pp. 23-33.
Chatelain, Jean-François, Lalonde, Jean-François et Tahan, Antoine S..
2012.
« Effect of Residual Stresses Embedded within Workpieces on the Distortion of Parts after Machining ».
International Journal of Mechanics, vol. 6, nº 1.
pp. 43-51.
Chatelain, Jean-François et Zaghbani, Imed.
2012.
« A Comparison of Special Helical Cutter Geometries Based on Cutting Forces for the Trimming of CFRP Laminates ».
International Journal of Mechanics, vol. 6, nº 1.
pp. 52-59.
Chatelain, Jean-François, Zaghbani, Imed et Monier, Joseph.
2012.
« Effect of Ply Orientation on Roughness for the Trimming Process of CFRP Laminates ».
International Journal of Industrial and Manufacturing Engineering, vol. 6, nº 8.
pp. 1516-1522.
Cheikhi, Laila et Abran, Alain.
2012.
« Investigation of the Relationships Between the Software Quality Models of the ISO 9126 Standard: An Empirical Study Using the Taguchi Method ».
Software Quality Professional, vol. 14, nº 2.
pp. 22-34.
Chen, J., Brissette, F. P. et Leconte, R..
2012.
« WeaGETS – a Matlab-based daily scale weather generator for generating precipitation and temperature ».
Procedia Environmental Sciences, vol. 13.
pp. 2222-2235.
Chen, J., Brissette, François, Leconte, Robert et Caron, A..
2012.
« A versatile weather generator for daily precipitation and temperature ».
Transactions of the ASABE, vol. 55, nº 3.
pp. 895-906.
Chen, Jie, Brissette, François P. et Leconte, Robert.
2012.
« Coupling statistical and dynamical methods for spatial downscaling of precipitation ».
Climatic Change, vol. 114, nº 3-4.
pp. 509-526.
Chen, Jie, Brissette, François P. et Leconte, Robert.
2012.
« Downscaling of weather generator parameters to quantify hydrological impacts of climate change ».
Climate Research, vol. 51, nº 3.
pp. 185-200.
Chherawala, Y. et Cheriet, M..
2012.
« W-TSV: Weighted topological signature vector for lexicon reduction in handwritten Arabic documents ».
Pattern Recognition, vol. 45, nº 9.
pp. 3277-3287.
Chion, Clément, Cantin, Guy, Dionne, Suzan, Dubeau, Benoit, Lamontagne, Philippe, Landry, Jacques-André, Marceau, Danielle, Martins, Christiane C. A., Ménard, Nadia, Michaud, Robert, Parrott, Lael et Turgeon, Samuel.
2012.
« Spatiotemporal modelling for policy analysis: Application to sustainable management of whale-watching activities ».
Marine Policy, vol. 38.
pp. 151-162.
Connolly, J. F., Granger, E. et Sabourin, R..
2012.
« Evolution of heterogeneous ensembles through dynamic particle swarm optimization for video-based face recognition ».
Pattern Recognition, vol. 45, nº 7.
pp. 2460-2477.
Connolly, Jean-François, Granger, Éric et Sabourin, Robert.
2012.
« An adaptive classification system for video-based face recognition ».
Information Sciences, vol. 192.
pp. 50-70.
Constantin, Nicolas, Kwok, Kai H., Shao, Hongxiao, Cismaru, Cristian et Zampardi, Peter J..
2012.
« Formulations and a computer-aided test method for the estimation of IMD levels in an envelope feedback RFIC power amplifier ».
IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, vol. 31, nº 12.
pp. 1881-1893.
Corriveau, Guillaume, Guilbault, Raynald, Tahan, Antoine et Sabourin, Robert.
2012.
« Review and study of genotypic diversity measures for real-coded representations ».
IEEE Transactions on Evolutionary Computation, vol. 16, nº 5.
pp. 695-710.
Costa, Y. M. G., Oliveira, L. S., Koerich, A. L., Gouyon, F. et Martins, J. G..
2012.
« Music genre classification using LBP textural features ».
Signal Processing, vol. 92, nº 11.
pp. 2723-2737.
Courchesne, Samuel, Popov, Andrei Vladimir et Botez, Ruxandra Mihaela.
2012.
« New aeroelastic studies for a morphing wing ».
INCAS Bulletin, vol. 4, nº 2.
pp. 19-28.
Couture, Annie, Laporte, Claude Y. et Champagne, Roger.
2012.
« Amélioration de la performance des processus de test de recette dans une société d'État québécoise ».
Génie Logiciel, nº 101.
pp. 51-60.
Crainic, Teodor Gabriel, Errico, Fausto, Malucelli, Federico et Nonato, Maddalena.
2012.
« Designing the master schedule for demand-adaptive transit systems ».
Annals of Operations Research, vol. 194, nº 1.
pp. 151-166.
Daran-Daneau, C., David, Éric, Fréchette, M. et Savoie, S..
2012.
« Correspondance of Dielectric Response in Time and Frequency Domains: A Case Study of PE Nanocomposites Containing Nanoclay ».
Dielectrics Newsletter, nº 26.
pp. 3-7.
De P. Oliveira, Camila F., Demarquette, Nicole R., Carastan, Danilo J. et Fechine, Guilhermino J. M..
2012.
« Fotodegradação de Compósitos de Poliestireno/Argila Montmorilonita: Efeito do Tipo de Argila e Presença de Sal ».
Polimeros, vol. 22, nº 1.
pp. 13-21.
Deng, Xiaoguang, Huet, Grégory, Tan, Suo et Fortin, Clement.
2012.
« Product decomposition using design structure matrix for intellectual property protection in supply chain outsourcing ».
Computers in Industry, vol. 63, nº 6.
pp. 632-641.
Desharnais, Jean-Marc et Abran, Alain.
2012.
« Software measurement methods: An analysis of two designs ».
Journal of Software Engineering and Applications, vol. 5, nº 10.
pp. 797-809.
Dhouib, K., Gharbi, A. et Ben Aziza, M. N..
2012.
« Joint optimal production control/preventive maintenance policy for imperfect process manufacturing cell ».
International Journal of Production Economics, vol. 137, nº 1.
pp. 126-136.
Diany, Mohammed et Bouzid, Abdel-Hakim.
2012.
« Creep constitutive law of packing materials based on relaxation tests ».
Journal of Tribology, vol. 134, nº 1.
Djebara, A., Songmene, V., Kouam, J. et Khettabi, R..
2012.
« An experimental investigation on dust emission during milling process using statistical analysis ».
International Journal of Advances in Machining and Forming Operations, vol. 4, nº 1.
pp. 15-37.
Djerafi, Tarek, Wu, Ke et Deslandes, Dominic.
2012.
« A temperature-compensation technique for substrate integrated waveguide cavities and filters ».
IEEE Transactions on Microwave Theory and Techniques, vol. 60, nº 8.
pp. 2448-2455.
Djerafi, Tarek, Wu, Ke et Deslandes, Dominic.
2012.
« Temperature drift compensation technique for substrate integrated waveguide oscillator ».
IEEE Microwave and Wireless Components Letters, vol. 22, nº 9.
pp. 489-491.
Do, Tan Dan, Bouzid, Hakim et Dao, Thien-My.
2012.
« On the Use of Theory of Rings on Nonlinear Elastic Foundation to Study the Effect of Bolt Spacing in Bolted Flange Joints ».
Journal of Pressure Vessel Technology, vol. 134, nº 6.
Dorion, Eric, Coallier, François, Rui, Charles, Nodari, Cristine Hermann, Olea, Pelayo Munhoz et Severo, Eliana Andrea.
2012.
« Brazilian technological ventures: a trilogy of entrepreneurship, knowledge creation and innovation ».
Journal of IMS Group, vol. 9.
pp. 9-30.
Dragoi, Andrei et Kara, Nadjia.
2012.
« Towards an aggregated biomonitoring trafic model for wireless networks ».
International Journal of Computer and Electrical Engineering, vol. 4, nº 5.
pp. 835-839.
Dubé, Martine, Hubert, Pascal, Gallet, Jan N. A. H., Stavrov, Darko, Bersee, Harald E. N. et Yousefpour, Ali.
2012.
« Metal mesh heating element size effect in resistance welding of thermoplastic composites ».
Journal of Composite Materials, vol. 46, nº 8.
pp. 911-919.
Duchaine, V., Mayer St.-Onge, B., Dalong, Gao et Gosselin, C..
2012.
« Stable and intuitive control of an intelligent assist device ».
IEEE Transactions on Haptics, vol. 5, nº 2.
pp. 148-159.
Dumas, Maxime, Robert, Jean-Marc et McGuffin, Michael John.
2012.
« Alertwheel: Radial bipartite graph visualization applied to intrusion detection system alerts ».
IEEE Network, vol. 26, nº 6.
pp. 12-18.
Dumoulin, Romain et Voix, Jérémie.
2012.
« On the use of smartphones for occupational noise monitoring: Instrumentation ».
[Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 40, nº 3.
pp. 52-53.
Dutil, Yvan et Rousse, Daniel.
2012.
« Energy costs of energy savings in buildings: a review ».
[Article de conférence]. Sustainability, vol. 4, nº 8.
pp. 1711-1732.
Duxbury, Alexander, White, Don, Samson, Claire, Hall, Stephen A., Wookey, James et Kendall, J. Michael.
2012.
« Fracture mapping using seismic amplitude variation with offset and azimuth analysis at the Weyburn CO2 storage site ».
Geophysics, vol. 77, nº 6.
N17-N28.
El Barachi, May et Kara, Nadjia.
2012.
« Contextual information acquisition and management solutions for IPBased networks: a survey ».
Recent Patents on Telecommunication, vol. 1, nº 2.
pp. 81-92.
El Boussaidi, Ghizlane et Mili, Hafedh.
2012.
« Understanding design patterns - What is the problem? ».
Software - Practice and Experience, vol. 42, nº 12.
pp. 1495-1529.
El-Asmar, M., Birafane, A., Helaoui, M., Kouki, A. B. et Ghannouchi, F. M..
2012.
« Analytical design methodology of outphasing amplification systems using a new simplified chireix combiner model ».
IEEE Transactions on Microwave Theory and Techniques, vol. 60, nº 6.
pp. 1886-1895.
Facchinello, Yann, Brailovski, Vladimir, Prokoshkin, Sergey D., Georges, Thomas et Dubinskiy, Sergey M..
2012.
« Manufacturing of nanostructured Ti-Ni shape memory alloys by means of cold/warm rolling and annealing thermal treatment ».
Journal of Materials Processing Technology, vol. 212, nº 11.
pp. 2294-2304.
Farrahi Moghaddam, Reza et Cheriet, Mohamed.
2012.
« AdOtsu: An adaptive and parameterless generalization of Otsu's method for document image binarization ».
Pattern Recognition, vol. 45, nº 6.
pp. 2419-2431.
Fatimi, Ahmed, Chabrot, Pascal, Berrahmoune, Saoussen, Coutu, Jean-Michel, Soulez, Gilles et Lerouge, Sophie.
2012.
« A new injectable radiopaque chitosan-based sclerosing embolizing hydrogel for endovascular therapies ».
Acta Biomaterialia, vol. 8, nº 7.
pp. 2712-2721.
Fatisson, Julien, Hallé, Stéphane, Nadeau, Sylvie, Ateme-Nguema, Barthélemy, Viau, Claude, Camus, Michel et Cloutier, Yves.
2012.
« Towards an integrated and adaptive risk assessment tool for engineered nanoparticles ».
International Journal of Theoretical and Applied Nanotechnology, vol. 1, nº 1.
pp. 117-123.
Feng, Zhengkun et Champliaud, Henri.
2012.
« Investigation of non-kinematic conical roll bending process with conical rolls ».
Simulation Modelling Practice and Theory, vol. 27.
pp. 65-75.
Fernandes, Laercio L., De Freitas, Cassia A., Demarquette, Nicole R. et Fechine, Guilhermino J. M..
2012.
« Estudo do Efeito do Tipo de Polipropileno na Fotodegradação da Blenda Polipropileno/Poliestireno de Alto Impacto ».
Polimeros, vol. 22, nº 1.
pp. 61-68.
Forcier, Louis-Charles et Joncas, Simon.
2012.
« Development of a structural optimization strategy for the design of next generation large thermoplastic wind turbine blades ».
Structural and Multidisciplinary Optimization, vol. 45, nº 6.
pp. 889-906.
Foudhil, W., Dhifaoui, B., Jabrallah, S. Ben, Dutil, Y. et Rousse, Daniel.
2012.
« Numerical simulation of thermal storage by latent and sensible heat in a porous vertical channel: performance analysis and comparison ».
Numerical Heat Transfer; Part A: Applications, vol. 62, nº 12.
pp. 948-972.
Francis, Adel et Miresco, Edmond.
2012.
« Discussion of critical path segments scheduling technique by Tarek Hegazy and wail Menesi ».
Journal of Construction Engineering and Management, vol. 138, nº 6.
pp. 786-787.
Franquet, E., Gibout, S., Bédécarrats, J.-P., Haillot, D. et Dumas, J.-P..
2012.
« Inverse method for the identification of the enthalpy of phase change materials from calorimetry experiments ».
Thermochimica Acta, vol. 546.
pp. 61-80.
Gadhoumi, Kais, Lina, Jean-Marc et Gotman, Jean.
2012.
« Discriminating preictal and interictal states in patients with temporal lobe epilepsy using wavelet analysis of intracerebral EEG ».
Clinical Neurophysiology, vol. 123, nº 10.
pp. 1906-1916.
Gagnon, Martin, Tahan, Antoine, Bocher, Philippe et Thibault, Denis.
2012.
« On the stochastic simulation of hydroelectric turbine blades transient response ».
Mechanical Systems and Signal Processing, vol. 32.
pp. 178-187.
Gao, Hongjun, Izquierdo, Ricardo et Truong, Vo-Van.
2012.
« Chemical vapor doping of transparent and conductive films of carbon nanotubes ».
Chemical Physics Letters, vol. 546.
pp. 109-114.
Gao, Y., Kikinis, R., Bouix, S., Shenton, M. et Tannenbaum, A..
2012.
« A 3D interactive multi-object segmentation tool using local robust statistics driven active contours ».
Medical Image Analysis, vol. 16, nº 6.
pp. 1216-1227.
Gao, Y., Li, Z., Lin, Z., Zhu, L., Tannenbaum, A., Bouix, S. et Wong, C. P..
2012.
« Automated dispersion and orientation analysis for carbon nanotube reinforced polymer composites ».
Nanotechnology, vol. 23, nº 43.
Gao, Yi, Rathi, Yogesh, Bouix, Sylvain et Tannenbaum, Allen.
2012.
« Filtering in the diffeomorphism group and the registration of point sets ».
IEEE Transactions on Image Processing, vol. 21, nº 10.
pp. 4383-4396.
Gariepy, A., Cyr, J., Levers, A., Perron, C., Bocher, P. et Lévesque, M..
2012.
« Potential applications of peen forming finite element modelling ».
Advances in Engineering Software, vol. 52.
pp. 60-71.
Georges, T., Brailovski, V. et Terriault, P..
2012.
« Characterization and design of antagonistic shape memory alloy actuators ».
Smart Materials and Structures, vol. 21, nº 3.
Gey, N., Bocher, P., Uta, E., Germain, L. et Humbert, M..
2012.
« Texture and microtexture variations in a near-α titanium forged disk of bimodal microstructure ».
Acta Materialia, vol. 60, nº 6-7.
pp. 2647-2655.
Ghazal, Mohammed, Vázquez, Carlos et Amer, Aishy.
2012.
« Real-time vandalism detection by monitoring object activities ».
Multimedia Tools and Applications, vol. 58, nº 3.
pp. 585-611.
Glaus, Mathias, Maiorano, Mélina et Hausler, Robert.
2012.
« Conception des réseaux par biomimétisme : application au transport des déchets ».
Déchets Sciences et Techniques, vol. 62.
pp. 16-21.
Godat, A., L'Hady, A., Chaallal, Omar et Neale, K. W..
2012.
« Bond behavior of the ETS FRP bar shear-strengthening method ».
Journal of Composites for Construction, vol. 16, nº 5.
pp. 529-539.
Godat, Ahmed, Labossiere, Pierre, Neale, Kenneth W. et Chaallal, Omar.
2012.
« Behavior of RC members strengthened in shear with EB FRP: Assessment of models and FE simulation approaches ».
Computers and Structures, vol. 92-93.
pp. 269-282.
Granger, Éric, Khreich, W., Sabourin, Robert et Gorodnichy, D. O..
2012.
« Fusion of biometric systems using Boolean combination: an application to iris-based authentication ».
International Journal of Biometrics, vol. 4, nº 3.
pp. 291-315.
Grigorie, T. L., Botez, R. M., Lungu, M., Edu, R. I. et Obreja, R..
2012.
« Micro-electromechanical systems gyro performance improvement through bias correction over temperature using an adaptive neural network-trained fuzzy inference system ».
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 226, nº G9.
pp. 1121-1138.
Grigorie, T. L., Botez, R. M., Popov, A. V., Mamou, M. et Mebarki, Y..
2012.
« A hybrid fuzzy logic proportionalintegral-derivative and conventional on-off controller for morphing wing actuation using shape memory alloy Part 1: Morphing system mechanisms and controller architecture design ».
Aeronautical Journal, vol. 116, nº 1179.
pp. 433-449.
Grigorie, T. L., Botez, R. M., Popov, A. V., Mamou, M. et Mebarki, Y..
2012.
« A hybrid fuzzy logic proportionalintegral-derivative and conventional on-off controller for morphing wing actuation using shape memory alloy Part 2: Controller implementation and validation ».
Aeronautical Journal, vol. 116, nº 1179.
pp. 451-465.
Grigorie, T. L., Popov, A. V., Botez, Ruxandra, Mamou, M. et Mebarki, Y..
2012.
« On-off and proportional-integral controller for a morphing wing. Part 1: Actuation mechanism and control design ».
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 226, nº 2.
pp. 131-145.
Grigorie, T. L., Popov, A. V., Botez, Ruxandra, Mamou, M. et Mebarki, Y..
2012.
« On-off and proportional-integral controller for a morphing wing. Part 2: Control validation - Numerical simulations and experimental tests ».
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, vol. 226.
pp. 146-162.
Guilbault, Raynald, Lalonde, Sébastien et Thomas, Marc.
2012.
« Nonlinear damping calculation in cylindrical gear dynamic modeling ».
Journal of Sound and Vibration, vol. 331, nº 9.
pp. 2110-2128.
Gupta, Vishwa Nath, Boulianne, Gilles et Cardinal, Patrick.
2012.
« CRIM’s content-based audio copy detection system for TRECVID 2009 ».
Multimedia Tools and Applications, vol. 60, nº 2.
pp. 371-387.
Haillot, D., Nepveu, F., Goetz, V., Py, X. et Benabdelkarim, M..
2012.
« High performance storage composite for the enhancement of solar domestic hot water systems. Part 2: Numerical system analysis ».
Solar Energy, vol. 86, nº 1.
pp. 64-77.
Hajji, Adnene, Gharbi, Ali et Dellagi, Sofiene.
2012.
« Quality and production control in multiple-product unreliable manufacturing system ».
[Article de conférence]. IFAC Proceedings Volumes, vol. 45, nº 6.
pp. 981-986.
Hajji, Adnéne, Gharbi, Ali et Pellerin, Robert.
2012.
« Joint production control and product quality decision making in a failure prone multiple-product manufacturing system ».
International Journal of Production Research, vol. 50, nº 13.
pp. 3661-3672.
Hajji, Adnéne, Pellerin, Robert, Léger, Pierre-Majorique, Gharbi, Ali et Babin, Gilbert.
2012.
« Dynamic pricing models for ERP systems under network externality ».
International Journal of Production Economics, vol. 135, nº 2.
pp. 708-715.
Halabi, Ana X., Montoya-Torres, Jairo R. et Obregón, Nelson.
2012.
« A case study of group decision method for environmental foresight and water resources planning using a fuzzy approach ».
Group Decision and Negotiation, vol. 21, nº 2.
pp. 205-232.
Hamelin, Philippe, Bigras, Pascal, Beaudry, Julien, Richard, Pierre-Luc et Blain, Michel.
2012.
« Discrete-time state feedback with velocity estimation using a dual observer: application to an underwater direct-drive grinding robot ».
IEEE/ASME Transactions on Mechatronics, vol. 17, nº 1.
pp. 187-191.
Hamelin, Philippe, Bigras, Pascal, Lemieux, Sylvain et Blain, Michel.
2012.
« Simulation of an impedance-controlled robot interacting with a real environment using hardware-in-the-loop ».
International Journal of Robotics and Automation, vol. 27, nº 2.
pp. 141-150.
Hanusiak, R. K., Oliveira, L. S., Justino, E. et Sabourin, R..
2012.
« Writer verification using texture-based features ».
International Journal on Document Analysis and Recognition, vol. 15, nº 3.
pp. 213-226.
Hedjam, Rachid, Moghaddam, Reza F. et Cheriet, Mohamed.
2012.
« Corrigendum to "A spatially adaptive statistical method for the binarization of historical manuscripts and degraded document images" [Pattern Recognition 44 (2011) 2184–2196] ».
Pattern Recognition, vol. 45, nº 8.
p. 3045.
Helmes, Roel J. K., Huijbregts, Mark A. J., Henderson, Andrew D. et Jolliet, Olivier.
2012.
« Spatially explicit fate factors of phosphorous emissions to freshwater at the global scale ».
International Journal of Life Cycle Assessment, vol. 17, nº 5.
pp. 646-654.
Hoseini, Majid, Hamid Pourian, Meysam, Bridier, Florent, Vali, Hojatollah, Szpunar, Jerzy A. et Bocher, Philippe.
2012.
« Thermal stability and annealing behaviour of ultrafine grained commercially pure titanium ».
Materials Science and Engineering: A, vol. 532.
pp. 58-63.
Ilinca, Adrian.
2012.
« Analyse du modèle de développement de l’énergie éolienne au Québec ».
Rubricas, vol. 3.
pp. 22-28.
Jabbarzadeh, Armin, Jalali Naini, Seyed Gholamreza, Davoudpour, Hamid et Azad, Nader.
2012.
« Designing a supply chain network under the risk of disruptions ».
Mathematical Problems in Engineering, vol. 2012.
Jarray, Abdallah, Quttoum, Ahmad Nahar, Otrok, Hadi et Dziong, Zbigniew.
2012.
« DDP: A Dynamic Dimensioning and Partitioning model of Virtual Private Networks resources ».
Computer Communications, vol. 35, nº 8.
pp. 906-915.
Joubair, Ahmed, Slamani, Mohamed et Bonev, Ilian.
2012.
« Kinematic calibration of a 3-DOF planar parallel robot ».
Industrial Robot, vol. 39, nº 4.
pp. 392-400.
Joubair, Ahmed, Slamani, Mohamed et Bonev, Ilian A..
2012.
« A novel XY-Theta precision table and a geometric procedure for its kinematic calibration ».
Robotics and Computer-Integrated Manufacturing, vol. 28, nº 1.
pp. 57-65.
Kaddoum, Georges et Gagnon, François.
2012.
« Design of a high-data-rate differential chaos-shift keying system ».
IEEE Transactions on Circuits and Systems II: Express Briefs, vol. 59, nº 7.
pp. 448-452.
Kaddoum, Georges, Gagnon, François, Charge, Pascal et Roviras, Daniel.
2012.
« A generalized BER prediction method for differential chaos shift keying system through different communication channels ».
Wireless Personal Communications, vol. 64, nº 2.
pp. 425-437.
Kaddoum, Georges, Lambard, T. et Gagnon, François.
2012.
« Performance analysis of a chaos shift keying system with polarisation sensitivity under multipath channel ».
IET Communications, vol. 6, nº 12.
pp. 1837-1845.
Kamguem, René, Songmene, Victor, Kenné, Jean-Pierre et Tahan, Souheil Antoine.
2012.
« Vision-based surface roughness inspection of machined aluminium parts ».
International Journal of Machining and Machinability of Materials, vol. 12, nº 3.
pp. 215-235.
Kanaan, Hadi Y. et Al Haddad, Kamal.
2012.
« Three-phase current-injection rectifiers: competitive topologies for power factor correction ».
IEEE Industrial Electronics Magazine, vol. 6, nº 3.
pp. 24-40.
Kanaan, Hadi Y., Al Haddad, Kamal, Sauriole, Guillaume et Chaffai, Rachid.
2012.
« Modelling, design and control of a SEPIC power factor corrector for single-phase rectifiers: Experimental validation ».
International Journal of Power Electronics, vol. 4, nº 3.
pp. 221-239.
Kapp, Marcelo N., Sabourin, Robert et Maupin, Patrick.
2012.
« A dynamic model selection strategy for support vector machine classifiers ».
Applied Soft Computing, vol. 12, nº 8.
pp. 2550-2565.
Karray, Mourad et Éthier, Yannic A..
2012.
« Reply to the discussion by P.K. Robertson on "Influence of particle size on the correlation between shear wave velocity and cone tip resistance" ».
Canadian Geotechnical Journal = Revue Canadienne de Géotechnique, vol. 49, nº 1.
pp. 124-128.
Kassab, Rabih Kamal, Champliaud, Henri, Lê, Van Ngan, Lanteigne, Jacques et Thomas, Marc.
2012.
« Experimental and finite element analysis of a t-joint welding ».
Journal of Mechanics Engineering and Automation, vol. 2, nº 7.
pp. 411-421.
Kenmeugne, B., Soh Fotsing, B. D., Anago, G. F., Fogue, M., Robert, J. L. et Kenne, J. P..
2012.
« On the evolution and comparison of multiaxial fatigue criteria ».
International Journal of Engineering and Technology, vol. 4, nº 1.
pp. 37-46.
Kenné, Jean-Pierre, Dejax, Pierre et Gharbi, Ali.
2012.
« Production planning of a hybrid manufacturing-remanufacturing system under uncertainty within a closed-loop supply chain ».
International Journal of Production Economics, vol. 135, nº 1.
pp. 81-93.
Khreich, Wael, Granger, Éric, Miri, Ali et Sabourin, Robert.
2012.
« A survey of techniques for incremental learning of HMM parameters ».
Information Sciences, vol. 197.
pp. 105-130.
Khreich, Wael, Granger, Éric, Miri, Ali et Sabourin, Robert.
2012.
« Adaptive ROC-based ensembles of HMMs applied to anomaly detection ».
Pattern Recognition, vol. 45, nº 1.
pp. 208-230.
Kikinis, Z., Asami, T., Bouix, S., Finn, C. T., Ballinger, T., Tworog-Dube, E., Kucherlapati, R., Kikinis, R., Shenton, M. E. et Kubicki, M..
2012.
« Reduced fractional anisotropy and axial diffusivity in white matter in 22q11.2 deletion syndrome: A pilot study ».
Schizophrenia Research, vol. 141, nº 1.
pp. 35-39.
Kiss, Marc-Olivier, Levasseur, Annie, Petit, Yvan et Lavigne, Patrick.
2012.
« Axial load-bearing capacity of an osteochondral autograft stabilized with a resorbable osteoconductive bone cement compared with a press-fit graft in a bovine model ».
The American Journal of Sports Medicine, vol. 40, nº 5.
pp. 1046-1052.
Koerte, I. K., Kaufmann, D., Hartl, E., Bouix, S., Pasternak, O., Kubicki, M., Rauscher, A., Li, D. K. B., Dadachanji, S. B., Taunton, J. A., Forwell, L. A., Johnson, A. M., Echlin, P. S. et Shenton, M. E..
2012.
« A prospective study of physician-observed concussion during a varsity university hockey season: White matter integrity in ice hockey players. Part 3 of 4 ».
Neurosurgical Focus, vol. 33, nº 6.
Kouam, J., Songmene, V., Djebara, A. et Khettabi, R..
2012.
« Effect of friction testing of metals on particle emission ».
Journal of Materials Engineering and Performance, vol. 21, nº 6.
pp. 965-972.
Kuang, X., Zhang, H., Zhao, S. et McGuffin, Michael John.
2012.
« Tracing tuples across dimensions: A comparison of scatterplots and parallel coordinate plots ».
[Article de conférence]. Computer Graphics Forum, vol. 31, nº 3pt4.
pp. 1365-1374.
Laflamme, G. Yves, Leduc, Stéphane et Petit, Yvan.
2012.
« Reattachment of complex femoral greater trochanteric nonunions with dual locking plates ».
The Journal of Arthroplasty, vol. 27, nº 4.
pp. 638-642.
Lagacé, Pierre-Yves, Billuart, Fabien, Ohl, Xavier, Skalli, Wafa, Tétreault, Patrice, de Guise, Jacques et Hagemeister, Nicola.
2012.
« Analysis of humeral head displacements from sequences of biplanar X-rays: Repeatability study and preliminary results in healthy subjects ».
Computer Methods in Biomechanics and Biomedical Engineering, vol. 15, nº 3.
pp. 221-229.
Lagnika, S. B., Nadeau, Sylvie et Ateme-Nguema, B..
2012.
« Intégration des systèmes de gestion des risques liés à la SST dans les mines souterraines ».
[Résumé d'une communication à une conférence]. Travail et Santé, vol. 28, nº 4.
p. 20.
Lamontagne, Guillaume, Landry, René Jr. et Kouki, Ammar B..
2012.
« Direct RF sampling GNSS receiver design and jitter analysis ».
Positioning, vol. 3, nº 4.
pp. 46-61.
Lapalme, James.
2012.
« Three schools of thought on enterprise architecture ».
IT Professional, vol. 14, nº 6.
pp. 37-43.
Lapalme, James et de Guerre, Donald W..
2012.
« Can a re-discovery of open socio-technical systems strengthen EA? ».
Journal of Enterprise Architecture, vol. 8, nº 1.
pp. 55-62.
Laporte, Claude Y., Berrhouma, Nabil, Doucet, Mikel et Palza-Vargas, Edgardo.
2012.
« Measuring the cost of software quality of a large software project at Bombardier transportation : a case study ».
Software Quality Professional, vol. 14, nº 3.
pp. 14-31.
Laporte, Claude Y., Fanmuy, Gauthier, Ptack, Ken et Marvin, Joe.
2012.
« Normes d'ingénierie système et logiciel pour les très petites organisations ».
Génie Logiciel, nº 100.
pp. 55-61.
Latombe, Guillaume, Granger, Éric et Dilkes, Fred A..
2012.
« Graphical EM for on-line learning of grammatical probabilities in radar electronic support ».
Applied Soft Computing, vol. 12, nº 8.
pp. 2362-2378.
Laville, Frédéric.
2012.
« Une expérience d'enseignement de l'acoustique industrielle intégrant pédagogie de la coopération, laboratoire informatique et projet de session ».
Canadian Acoustics = Acoustique Canadienne, vol. 40, nº 2.
pp. 11-14.
Lebailly, F., Lima, Lvpc, Clairemidi, A., Aubert, B., Guerard, S., Chaibi, Y., de Guise, Jacques A., Fontaine, C. et Skalli, W..
2012.
« Semi-automated stereoradiographic upper limb 3D reconstructions using a combined parametric and statistical model: a preliminary study ».
Surgical and Radiologic Anatomy, vol. 34, nº 8.
pp. 757-765.
Lefèvre, Florent, Chalifour, Annie, Yu, Luping, Chodavarapu, Vamsy, Juneau, Philippe et Izquierdo, Ricardo.
2012.
« Algal fluorescence sensor integrated into a microfluidic chip for water pollutant detection ».
Lab on a Chip, vol. 12, nº 4.
pp. 787-793.
Lei, Zhijun, Mahallati, Ali, Cunningham, Mark et Germain, Patrick.
2012.
« Effects of core flow swirl on the flow characteristics of a scalloped forced mixer ».
Journal of Engineering for Gas Turbines and Power, vol. 134, nº 11.
Lemay, Mathieu , Nguyen, Kim-Khoa, St Arnaud, Bill et Cheriet, Mohamed.
2012.
« Toward a zero-carbon network converging cloud computing and network virtualization ».
IEEE Internet Computing, vol. 16, nº 6.
pp. 51-59.
Lemieux, Pierre-Olivier, Nuño, Natalia, Hagemeister, Nicola et Tetreault, Patrice.
2012.
« Mechanical analysis of cuff tear arthropathy during multiplanar elevation with the AnyBody shoulder model ».
Clinical Biomechanics, vol. 27, nº 8.
pp. 801-806.
Levasseur, A., Ploeg, H. L. et Petit, Y..
2012.
« Comparison of the influences of structural characteristics on bulk mechanical behaviour: experimental study using a bone surrogate ».
Medical and Biological Engineering and Computing, vol. 50, nº 1.
pp. 61-67.
Levasseur, Annie, Brandão, Miguel, Lesage, Pascal, Margni, Manuele, Pennington, David, Clift, Roland et Samson, Réjean.
2012.
« Valuing temporary carbon storage ».
Nature Climate Change, vol. 2, nº 1.
pp. 6-8.
Levasseur, Annie, Lesage, Pascal, Margni, Manuele, Brandão, Miguel et Samson, Réjean.
2012.
« Assessing temporary carbon sequestration and storage projects through land use, land-use change and forestry: Comparison of dynamic life cycle assessment with ton-year approaches ».
Climatic Change, vol. 115, nº 3-4.
pp. 759-776.
Lévesque, Mélanie, David, Éric, Hudon, Claude et Belec, Mario.
2012.
« Contribution of humidity to the evolution of slot partial discharges ».
IEEE Transactions on Dielectrics and Electrical Insulation, vol. 19, nº 1.
pp. 61-75.
Li, Li et Aubertin, Michel.
2012.
« A modified solution to assess the required strength of exposed backfill in mine stopes ».
Canadian Geotechnical Journal = Revue Canadienne de Géotechnique, vol. 49, nº 8.
pp. 994-1002.
Li, Li, Dubé, Jean-Sébastien et Zangeneh-Madar, Z..
2012.
« Estimation of total and effective stresses in trenches with inclined walls ».
International Journal of Geotechnical Engineering, vol. 6, nº 4.
pp. 525-538.
Liu, Fuchun Dziong et Dziong, Zbigniew.
2012.
« Decentralized diagnosis of fuzzy Discrete-Event Systems ».
European Journal of Control, vol. 18, nº 3.
pp. 304-315.
Lopes, R., Lina, J. M., Fahoum, F. et Gotman, J..
2012.
« Detection of epileptic activity in fMRI without recording the EEG ».
Neuroimage, vol. 60, nº 3.
pp. 1867-1879.
Lopez-Martin, Cuauhtemoc et Abran, Alain.
2012.
« Applying expert judgment to improve an individual's ability to predict software development effort ».
International Journal of Software Engineering and Knowledge Engineering, vol. 22, nº 4.
pp. 467-483.
Ma, Jinping, Kouki, Ammar B. et Landry, René Jr.
2012.
« Wideband circularly polarized single probe-fed patch antenna ».
Microwave and Optical Technology Letters, vol. 54, nº 8.
pp. 1803-1808.
Ma, Xin, Xu, Fan, Benavides, Jaime et Cloutier, Sylvain G..
2012.
« High performance hybrid near-infrared LEDs using benzenedithiol cross-linked PbS colloidal nanocrystals ».
Organic Electronics: physics, materials, applications, vol. 13, nº 3.
pp. 525-531.
Macias-Valadez, Daniel, Santerre, Rock, Larochelle, Sophie et Landry, René Jr.
2012.
« Improving vertical GPS precision with a GPS-over-fiber architecture and real-time relative delay calibration ».
GPS Solutions, vol. 16, nº 4.
pp. 449-462.
Mac-Thiong, Jean-Marc, Duong, Luc, Parent, Stefan., Hresko, Michael Timothy, Dimar, John R., Weidenbaum, Mark. et Labelle, Hubert.
2012.
« Reliability of the spinal deformity study group classification of lumbosacral spondylolisthesis ».
Spine, vol. 37, nº 2.
E95-E102.
Mahmoud, A. Y., Zhang, J., Ma, D., Izquierdo, R. et Truong, V. V..
2012.
« Optically-enhanced performance of polymer solar cells with low concentration of gold nanorods in the anodic buffer layer ».
Organic Electronics: physics, materials, applications, vol. 13, nº 12.
pp. 3102-3107.
Mandal, Mrinal Kanti, Deslandes, Dominic et Wu, Ke.
2012.
« Complementary microstrip-slotline stub configuration for group delay engineering ».
IEEE Microwave and wireless components letters, vol. 22, nº 8.
pp. 388-390.
Maref, W., Van Den Bossche, N., Armstrong, M., Lacasse, M. A., Elmahdy, H. et Glazer, R..
2012.
« Condensation risk assessment on box windows: The effect of the window-wall interface ».
Journal of Building Physics, vol. 36, nº 1.
pp. 35-56.
Mazhorova, Anna, Markov, Andrey, Ung, Bora, Rozé, Mathieu, Gorgutsa, Stepan et Skorobogatiy, Maksim.
2012.
« Thin chalcogenide capillaries as efficient waveguides from mid-infrared to terahertz ».
Journal of the Optical Society of America B: Optical Physics, vol. 29, nº 8.
pp. 2116-2123.
McGuffin, Michael John.
2012.
« Simple algorithms for network visualization: a tutorial ».
Tsinghua Science and Technology, vol. 17, nº 4.
pp. 383-398.
Mehmanparast, H. N., Mac-Thiong, J. M. et Petit, Y..
2012.
« Compressive properties of a synthetic bone substitute for vertebral cancellous bone ».
[Article de conférence]. International Journal of Biomedical and Biological Engineering, vol. 6, nº 5.
pp. 144-147.
Ménard, Camille, Ramirez, Antonio Avalos, Nikiema, Josiane et Heitz, Michèle.
2012.
« Biofiltration of methane and trace gases from landfills: A review ».
Environmental Reviews, vol. 20, nº 1.
pp. 40-53.
Ménard, Camille, Ramirez, Antonio Avalos, Nikiema, Josiane et Heitz, Michèle.
2012.
« Effect of trace gases, toluene and chlorobenzene, on methane biofiltration: An experimental study ».
Chemical Engineering Journal, vol. 204-206.
pp. 8-15.
Merabtine, A., Mokraoui, S., Benelmir, R. et Descieux, D..
2012.
« A comparative modeling of an experimental single-zone building with Bond Graphs and TRNSYS ».
International Journal of Energy, Environment and Economics, vol. 20, nº 1.
pp. 39-51.
Merabtine, A., Mokraoui, S., Benelmir, R. et Laraqi, N..
2012.
« A bond graph model validation of an experimental single zone building ».
Fluid Dynamics and Materials Processing, vol. 8, nº 2.
pp. 215-240.
Merabtine, Abdelatif et Benelmir, Riad.
2012.
« Modeling of the RHC system with Bond Graphs approach ».
International Journal of Thermal and Environmental Engineering, vol. 5, nº 2.
pp. 145-153.
Merabtine, Abdelatif, Mokraoui, Salim, Benelmir, Riad et Laraqi, Najib.
2012.
« Modélisation par la méthode Bond Graph d'un système combiné plancher chauffant-plafond rafraîchissant ».
Mechanics and Industry, vol. 13, nº 1.
pp. 77-86.
Mezghani, N., Ouakrim, Y., Fuentes, A., Hagemeister, N., Aissaoui, Rachid, Pelletier, M. et de Guise, Jacques A..
2012.
« Knee osteoarthritis severity assessment using knee kinematic data classification ».
[Article de conférence]. Osteoarthritis and Cartilage, vol. 20, nº suppl. 1.
S97.
Mezghani, N., Phan, P., Mitiche, A., Labelle, H. et de Guise, J. A..
2012.
« A Kohonen neural network description of scoliosis fused regions and their corresponding Lenke classification ».
International Journal of Computer Assisted Radiology and Surgery, vol. 7, nº 2.
pp. 257-264.
Mezghani, Neila, Mitiche, Amar et Cheriet, Mohamed.
2012.
« Maximum entropy Gibbs density modeling for pattern classification ».
Entropy, vol. 14, nº 12.
pp. 2478-2491.
Mofidi, Amir, Chaallal, Omar, Benmokrane, Brahim et Neale, Kenneth.
2012.
« Experimental tests and design model for RC beams strengthened in shear using the embedded through-section FRP method ».
Journal of Composites for Construction, vol. 16, nº 5.
pp. 540-550.
Mofidi, Amir, Chaallal, Omar, Benmokrane, Brahim et Neale, Kenneth.
2012.
« Performance of end-anchorage systems for RC beams strengthened in shear with epoxy-bonded FRP ».
Journal of Composites for Construction, vol. 16, nº 3.
pp. 322-331.
Moghaddam, R. F. et Cheriet, M..
2012.
« Real-time knowledge-based processing of images: application of the online NLPM method to perceptual visual analysis ».
IEEE Transactions on Image Processing, vol. 21, nº 8.
pp. 3390-3404.
Mokraoui, S., Merabtine, A., Benelmir, R. et Laraqi, N..
2012.
« Bond graph approach for modeling and analysis of transient heat conduction in the prospect of energy building application ».
International Journal of Energy, Environment and Economics, vol. 20, nº 1.
pp. 53-73.
Monfet, Danielle et Zmeureanu, Radu.
2012.
« Ongoing commissioning of water-cooled electric chillers using benchmarking models ».
Applied Energy, vol. 92.
pp. 99-108.
Montoya-Torres, Jairo R., Solano-Charris, Elyn L. et Durán-Cantor, Consuelo.
2012.
« Memetic algorithm to minimize costs of activities in RCPSP ».
DYNA, vol. 79, nº 174.
pp. 86-95.
Morency, François, Beaugendre, H. et Gallizio, F..
2012.
« Aerodynamic force evaluation for ice shedding phenomenon using vortex in cell scheme, penalisation and level set approaches ».
International Journal of Computational Fluid Dynamics, vol. 26, nº 9-10.
pp. 435-450.
Morency, François et Hallé, Stéphane.
2012.
« A simplified approach for modelling airborne nanoparticles transport and diffusion ».
International Journal of Computational Methods & Experimental Measurements, vol. 1, nº 1.
pp. 55-71.
Mosbah, Abdallah Ben et Dao, Thien-My.
2012.
« Optimisation of manufacturing cell formation with extended great deluge meta-heuristic approach ».
International Journal of Services Operations and Informatics, vol. 7, nº 4.
pp. 280-293.
Motapon, Souleman Njoya, Tremblay, Olivier et Dessaint, Louis-A..
2012.
« Development of a generic fuel cell model: Application to a fuel cell vehicle simulation ».
International Journal of Power Electronics, vol. 4, nº 6.
pp. 505-522.
Movahedi, Zeinab, Ayari, Mouna, Langar, Rami et Pujolle, Guy.
2012.
« A survey of autonomic network architectures and evaluation criteria ».
IEEE Communications Surveys and Tutorials, vol. 14, nº 2.
pp. 464-490.
Nadeau, Sylvie, Hallé, Stéphane, Viau, Claude et Cloutier, Yves.
2012.
« Call for the development of an adaptative tool for assessing human health posed by engineered nanoparticle risk ».
International Journal of Safety and Security Engineering, vol. 2, nº 1.
pp. 40-53.
Nasir, Hassan, Haas, Carl T., Rankin, Jeff H., Fayek, Aminah Robinson, Forgues, Daniel et Ruwanpura, Janaka.
2012.
« Development and implementation of a benchmarking and metrics program for construction performance and productivity improvement ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 39, nº 9.
pp. 957-967.
Nelisse, Hugues, Gaudreau, Marc-André, Boutin, Jerome, Voix, Jérémie et Laville, Frédéric.
2012.
« Measurement of hearing protection devices performance in the workplace during full-shift working operations ».
Annals of Occupational Hygiene, vol. 56, nº 2.
pp. 221-232.
Nelisse, Hugues, Le Cocq, Cécile, Boutin, Jérôme, Laville, Frédéric et Voix, Jérémie.
2012.
« Estimation of noise levels and hpd attenuation in the workplace using microphones located in the vicinity of the ear ».
[Article de conférence]. Canadian Acoustics = Acoustique Canadienne, vol. 40, nº 3.
pp. 122-123.
Nerguizian, Vahé, Alazzam, Anas, Roman, Dacian, Stiharu, Ion et Burnier, Miguel Jr.
2012.
« Analytical solutions and validation of electric field and dielectrophoretic force in a bio-microfluidic channel ».
Electrophoresis, vol. 33, nº 3.
pp. 426-435.
Nguyen, Duc Hau, Levy, Florence, Pham Van Bang, Damien, Guillou, Sylvain, Nguyen, Kim Dan et Chauchat, Julien.
2012.
« Simulation of dredged sediment releases into homogeneous water using a two-phase model ».
Advances in Water Resources, vol. 48.
pp. 102-112.
Nguyen, Kim Khoa, Cheriet, Mohamed, Lemay, Mathieu, Reijs, Victor, MacKarel, Andrew et Pastrama, Alin.
2012.
« Environmental-aware virtual data center network ».
Computer Networks, vol. 56, nº 10.
pp. 2538-2550.
Nguyen-Tri, Phuong, Guinault, Alain et Sollogoub, Cyrille.
2012.
« Élaboration et propriétés des composites polypropylène recyclé/fibres de bambou ».
Matériaux et Techniques, vol. 100, nº 5.
413–423.
Njike, Achille N., Pellerin, Robert et Kenné, Jean Pierre.
2012.
« Simultaneous control of maintenance and production rates of a manufacturing system with defective products ».
Journal of Intelligent Manufacturing, vol. 23, nº 2.
pp. 323-332.
Noël, A., Maghni, K., Cloutier, Y., Dion, C., Wilkinson, K. J., Hallé, S., Tardif, R. et Truchon, G..
2012.
« Effects of inhaled nano-TiO 2 aerosols showing two distinct agglomeration states on rat lungs ».
Toxicology Letters, vol. 214, nº 2.
pp. 109-119.
Noël, Alexandra, Maghni, Karim, Cloutier, Yves, Dion, Chantal, Wilkinson, Kevin James, Hallé, Stéphane, Tardif, Robert et Truchon, Ginette.
2012.
« Influence de l’état d’agglomération de nano-aérosols de TiO2 sur la toxicité pulmonaire chez le rat ».
Médecine Sciences Amérique, vol. 1, nº 1.
pp. 39-44.
Noumeir, Rita.
2012.
« Requirements for interoperability in healthcare information systems ».
Journal of Healthcare Engineering, vol. 3, nº 2.
pp. 323-346.
Noumeir, Rita et Pambrun, Jean-François.
2012.
« Teaching DICOM by problem solving ».
Journal of Digital Imaging, vol. 25, nº 5.
pp. 653-661.
Ohl, Xavier, Billuart, Fabien, Lagacé, Pierre-Yves, Gagey, Olivier, Hagemeister, Nicola et Skalli, Wafa.
2012.
« 3D morphometric analysis of 43 scapulae ».
Surgical and Radiologic Anatomy, vol. 34, nº 5.
pp. 447-453.
O'Leary, Paul et Harker, Matthew.
2012.
« A framework for the evaluation of inclinometer data in the measurement of structures ».
IEEE Transactions on Instrumentation and Measurement, vol. 61, nº 5.
pp. 1237-1251.
Ophir, N., Lau, R. K. W., Ménard, M., Salem, R., Padmaraju, K., Okawachi, Y., Lipson, M., Gaeta, A. L. et Bergman, K..
2012.
« First demonstration of a 10-Gb/s RZ end-to-end four-wave-mixing based link at 1884 nm using silicon nanowaveguides ».
IEEE Photonics Technology Letters, vol. 24, nº 4.
pp. 276-278.
Ophir, N., Lau, R. K. W., Menard, M., Zhu, X., Padmaraju, K., Okawachi, Y., Salem, R., Lipson, M., Gaeta, A. L. et Bergman, K..
2012.
« Wavelength conversion and unicast of 10-Gb/s data spanning up to 700 nm using a silicon nanowaveguide ».
Optics Express, vol. 20, nº 6.
pp. 6488-6495.
Ortiz-Vargas, D. A. et Montoya-Torres, J. R..
2012.
« Programación de la producctión baio un ambiente de colaboración en una cadena de suministro diádica ».
Ingenieria y Universidad, vol. 16, nº 2.
pp. 315-331.
Ouellet-Plamondon, Claudiane, Lynch, Rod J. et Al-Tabbaa, Abir.
2012.
« Comparison between granular pillared, organo- and inorgano-organo-bentonites for hydrocarbon and metal ion adsorption ».
Applied Clay Science, vol. 67-68.
pp. 91-98.
Ounejjar, Y., Al Haddad, K. et Dessaint, L. A..
2012.
« A novel six-band hysteresis control for the packed U cells seven-level converter: experimental validation ».
IEEE Transactions on Industrial Electronics, vol. 59, nº 10.
pp. 3808-3816.
P.R., Cavalin, Robert, Sabourin et C.Y., Suen.
2012.
« LOGID : An adaptive framework combining local and global incremental learning for dynamic selection of ensembles of HMMs ».
[Article de conférence]. Pattern Recognition, vol. 45, nº 9.
pp. 3544-3556.
Pambrun, Jean-François et Noumeir, Rita.
2012.
« Streaming of medical images using JPEG2000 Interactive Protocol ».
International Journal of Innovative Computing and Applications, vol. 4, nº 3-4.
pp. 135-148.
Parent, Stefan, Nault, Marie-Lyne, Mac-Thiong, Jean-Marc, Roy-Beaudry, Marjolaine, Turgeon, Isabelle, de Guise, Jacques, Labelle, Hubert et Parent, Stefan.
2012.
« Identifier les scolioses idiopathiques progressives à la première visite à l’aide de paramètres morphologiques 3D ».
[Résumé d'une communication à une conférence]. Revue de Chirurgie Orthopédique et Traumatologique, vol. 98, nº 7, Suppl..
S323-S324.
Pasternak, O., Westin, C. F., Bouix, S., Seidman, L. J., Goldstein, J. M., Woo, T. U., Petryshen, T. L., Mesholam-Gately, R. I., McCarley, R. W., Kikinis, R., Shenton, M. E. et Kubicki, M..
2012.
« Excessive extracellular volume reveals a neurodegenerative pattern in schizophrenia onset ».
Journal of Neuroscience, vol. 32, nº 48.
pp. 17365-17372.
Petit, Yvan, Cloutier, Luc P., Duke, Kajsa et Laflamme, G. Yves.
2012.
« The effects of femoral neck cut, cable tension, and muscles forces on the greater trochanter fixation ».
Medical and Biological Engineering and Computing, vol. 50, nº 4.
pp. 411-417.
Petrova, Natalia et Bouzid, Abdel-Hakim.
2012.
« Deflections of a multipass shell-and-tube heat exchanger bolted joint subjected to nonaxisymmetric thermal loading ».
Journal of Pressure Vessel Technology, vol. 134, nº 1.
Pigeon, Steven et Coulombe, Stéphane.
2012.
« K-Means based prediction of transcoded jpeg file size and structural similarity ».
International Journal of Multimedia Data Engineering and Management, vol. 3, nº 2.
pp. 41-57.
Poliquin, Guillaume et Roy-Fortin, Guillaume.
2012.
« Wolf-Keller Theorem for Neumann Eigenvalues ».
Annales des sciences mathématiques du Québec, vol. 36, nº 1.
pp. 169-178.
Punithakumar, Kumaradevan, Yuan, Jing, Ben Ayed, Ismail, Li, Shuo et Boykov, Yuri.
2012.
« A convex max-flow approach to distribution-based figure-ground separation ».
SIAM Journal on Imaging Sciences, vol. 5, nº 4.
pp. 1333-1354.
Qu, Hang, Ung, Bora, Roze, Mathieu et Skorobogatiy, Maksim.
2012.
« All photonic bandgap fiber spectroscopic system for detection of refractive index changes in aqueous analytes ».
Sensors and Actuators, B: Chemical, vol. 161, nº 1.
pp. 235-243.
Quesada, Guillermo, Rousse, Daniel, Dutil, Yvan, Badache, Messaoud et Hallé, Stephane.
2012.
« A comprehensive review of solar facades. Opaque solar facades ».
Renewable and Sustainable Energy Reviews, vol. 16, nº 5.
pp. 2820-2832.
Quesada, Guillermo, Rousse, Daniel, Dutil, Yvan, Badache, Messaoud et Hallé, Stephane.
2012.
« A comprehensive review of solar facades. Transparent and translucent solar facades ».
Renewable and Sustainable Energy Reviews, vol. 16, nº 5.
pp. 2643-2651.
Quiniou, Solen, Cheriet, Mohamed et Anquetil, Éric.
2012.
« Error handling approach using characterization and correction steps for handwritten document analysis ».
International Journal on Document Analysis and Recognition, vol. 15, nº 2.
pp. 125-141.
Quintana, V., Rivest, L., Pellerin, R. et Kheddouci, F..
2012.
« Re-engineering the engineering change management process for a drawing-less environment ».
Computers in Industry, vol. 63, nº 1.
pp. 79-90.
Quintana, Virgilio, Rivest, Louis et Pellerin, Robert.
2012.
« Measuring and improving the process of engineering change orders in a model–based definition context ».
International Journal of Product Lifecycle Management, vol. 6, nº 2.
pp. 138-160.
Radvar-Esfahlan, Hassan et Tahan, Souheil-Antoine.
2012.
« Nonrigid geometric metrology using generalized numerical inspection fixtures ».
Precision Engineering, vol. 36, nº 1.
pp. 1-9.
Rahman, M. H., Ouimet, T. K., Saad, Maarouf, Kenné, Jean-Pierre et Archambault, P. S..
2012.
« Development of a 4DoFs exoskeleton robot for passive arm movement assistance ».
International Journal of Mechatronics and Automation, vol. 2, nº 1.
pp. 34-50.
Rahman, Mohammad Habibur, Kittel-Ouimet, Thierry, Saad, Maarouf, Kenné, Jean-Pierre et Archambault, Philippe S..
2012.
« Development and control of a robotic exoskeleton for shoulder, elbow and forearm movement assistance ».
Applied Bionics and Biomechanics, vol. 9, nº 3.
pp. 275-292.
Rahmani, Salem, Hamadi, Abdelhamid et Al-Haddad, Kamal.
2012.
« A Lyapunov-function-based control for a three-phase shunt hybrid active filter ».
IEEE Transactions on Industrial Electronics, vol. 59, nº 3.
pp. 1418-1429.
Rezazadeh, Soroosh et Coulombe, Stéphane.
2012.
« A novel discrete wavelet domain error-based image quality metric with enhanced perceptual performance ».
International Journal of Computer and Electrical Engineering, vol. 4, nº 3.
pp. 390-395.
Rivest-Henault, D., Sundar, H. et Cheriet, M..
2012.
« Nonrigid 2D/3D registration of coronary artery models with live fluoroscopy for guidance of cardiac interventions ».
IEEE Transactions on Medical Imaging, vol. 31, nº 8.
pp. 1557-1572.
Rivest-Henault, David, Farrahi Moghaddam, Reza et Cheriet, Mohamed.
2012.
« A local linear level set method for the binarization of degraded historical document images ».
International Journal on Document Analysis and Recognition, vol. 15, nº 2.
pp. 101-124.
Robert, J. M., Otrok, H., Quttoum, A. N. et Boukhris, R..
2012.
« A distributed resource management model for Virtual Private Networks: Tit-for-Tat strategies ».
Computer Networks, vol. 56, nº 2.
pp. 927-939.
Robert, Jean-Marc, Otrok, Hadi et Chriqi, Abdelkarim.
2012.
« RBC-OLSR: Reputation-based clustering OLSR protocol for wireless ad hoc networks ».
Computer Communications, vol. 35, nº 4.
pp. 487-499.
Rosenberger, G., Nestor, P. G., Oh, J. S., Levitt, J. J., Kindleman, G., Bouix, S., Fitzsimmons, J., Niznikiewicz, M., Westin, C. F., Kikinis, R., McCarley, R. W., Shenton, M. E. et Kubicki, M..
2012.
« Anterior limb of the internal capsule in schizophrenia: A diffusion tensor tractography study ».
Brain Imaging and Behavior, vol. 6, nº 3.
pp. 417-425.
Rouleau, Dominique M., Canet, Fanny, Chapleau, Julien, Petit, Yvan, Sandman, Emilie, Faber, Kenneth J. et Athwal, George S..
2012.
« The influence of proximal ulnar morphology on elbow range of motion ».
Journal of Shoulder and Elbow Surgery, vol. 21, nº 3.
pp. 384-388.
Rouleau, Dominique M., Sandman, Emilie, Canet, Fanny, Djahangiri, Ali, Laflamme, Yves, Athwal, George S. et Petit, Yvan.
2012.
« Radial head translation measurement in healthy individuals: the radiocapitellar ratio ».
Journal of Shoulder and Elbow Surgery, vol. 21, nº 5.
pp. 574-579.
Roy, David, Kauffmann, Claude, Delorme, Sébastien, Lerouge, Sophie, Cloutier, Guy et Soulez, Gilles.
2012.
« A literature review of the numerical analysis of abdominal aortic aneurysms treated with endovascular stent grafts ».
Computational and Mathematical Methods in Medicine, vol. 2012.
Rufiange, Sébastien, McGuffin, Michael John et Fuhrman, Christopher.
2012.
« TreeMatrix: A Hybrid Visualization of Compound Graphs ».
Computer Graphics Forum, vol. 31, nº 1.
pp. 89-101.
Ruiz, Heidi, Cobo, Pedro, Dupont, Thomas, Martin, Bruno et Leclaire, Philippe.
2012.
« Acoustic properties of plates with unevenly distributed macroperforations backed by woven meshes ».
Journal of the Acoustical Society of America, vol. 132, nº 5.
pp. 3138-3147.
Ruiz-Vargas, J., Siredey-Schwaller, N., Gey, N., Bocher, P. et Hazotte, A..
2012.
« Microstructure development during isothermal brazing of Ni/BNi-2 couples ».
Journal of Materials Processing Technology, vol. 213, nº 1.
pp. 20-29.
Saber, Hamed H., Maref, Wahid, Elmahdy, Hakim, Swinton, Michael C. et Glazer, Rock.
2012.
« 3D heat and air transport model for predicting the thermal resistances of insulated wall assemblies ».
Journal of Building Performance Simulation, vol. 5, nº 2.
pp. 75-91.
Saber, Hamed H., Maref, Wahid, Sherrer, Gordon et Swinton, Michael C..
2012.
« Numerical modeling and experimental investigations of thermal performance of reflective insulations ».
Journal of Building Physics, vol. 36, nº 2.
pp. 163-177.
Saber, Hamed H., Maref, Wahid et Swinton, Michael C..
2012.
« Thermal response of basement wall systems with low-emissivity material and furred airspace ».
Journal of Building Physics, vol. 35, nº 4.
pp. 353-371.
Sadi, Roberta K., Kurusu, Rafael S., Fechine, Guilhermino J. M. et Demarquette, Nicole R..
2012.
« Compatibilization of polypropylene/ poly(3-hydroxybutyrate) blends ».
Journal of Applied Polymer Science, vol. 123, nº 6.
pp. 3511-3519.
Sagol, Ece, Reggio, Marcelo et Ilinca, Adrian.
2012.
« Assessment of two-equation turbulence models and validation of the performance characteristics of an experimental wind turbine by CFD ».
ISRN Mechanical Engineering, vol. 2012.
Salissou, Yacoubou, Panneton, Raymond et Doutres, Olivier.
2012.
« Complement to standard method for measuring normal incidence sound transmission loss with three microphones ».
Journal of the Acoustical Society of America, vol. 131, nº 3.
EL216-EL222.
Samia, Aitouche, Djamel, Mouss Mohamed, Ratté, Sylvie, Abdelghafour, Kaanit, Kinza, Mouss et Hayet, Mouss.
2012.
« Comparative study, based on metamodels, of methods for controlling performance ».
International Journal of Computer Science Issues, vol. 9, nº 3.
Sanjose, Marlene et Moreau, Stéphane.
2012.
« Numerical simulations of a low-speed radial fan ».
International Journal of Engineering Systems Modelling and Simulation, vol. 4, nº 1-2.
pp. 47-58.
Savaria, Vincent, Bridier, Florent et Bocher, Philippe.
2012.
« Computational quantification and correction of the errors induced by layer removal for subsurface residual stress measurements ».
International Journal of Mechanical Sciences, vol. 64, nº 1.
pp. 184-195.
Sebti, Anas et Bennis, Saad.
2012.
« Optimisation des coûts de la réhabilitation hydraulique d'un réseau de drainage urbain ».
Revue des sciences de l'eau, vol. 25, nº 2.
pp. 121-137.
Sebti, Anas, Bennis, Saad et Mballa, Landry.
2012.
« Indice de performance hydraulique d'un ponceau ».
Canadian Journal of Civil Engineering = Revue Canadienne de Génie Civil, vol. 39, nº 3.
pp. 271-278.
Séguin, Normand, Laporte, Claude Y. et Larissa Nsoa, Adèle.
2012.
« Analyse, évaluation et amélioration de la performance du processus de développement de logiciels libres : une approche par la nouvelle norme ISO/CEI 29110 ».
Génie Logiciel, nº 102.
pp. 18-33.
Sen, Sagar, Moha, Naouel, Mahé, Vincent, Barais, Olivier, Baudry, Barais et Jézéquel, Jean-Marc.
2012.
« Reusable model transformations ».
Software and Systems Modeling, vol. 11, nº 1.
pp. 111-125.
Sepulveda-Mora, Sergio B. et Cloutier, Sylvain G..
2012.
« Figures of merit for high-performance transparent electrodes using dip-coated silver nanowire networks ».
Journal of Nanomaterials, vol. 2012.
Shaayegan, Vahid, Wood-Adams, Paula et Demarquette, Nicole Raymonde.
2012.
« Linear viscoelasticity of immiscible blends: The application of creep ».
Journal of Rheology, vol. 56, nº 5.
pp. 1039-1056.
Shenton, M. E., Hamoda, H. M., Schneiderman, J. S., Bouix, S., Pasternak, O., Rathi, Y., Vu, M. A., Purohit, M. P., Helmer, K., Koerte, I., Lin, A. P., Westin, C. F., Kikinis, R., Kubicki, M., Stern, R. A. et Zafonte, R..
2012.
« A review of magnetic resonance imaging and diffusion tensor imaging findings in mild traumatic brain injury ».
Brain Imaging and Behavior, vol. 6, nº 2.
pp. 137-192.
Shih, Andy, Fathololoumi, Saeed, Zhao, Songrui, Le Huy, Binh, Nguyen, Hieu Pham Trung, Shih, Ishiang et Mi, Zetian.
2012.
« Negative differential resistance in GaN/AlN heterostructure nanowires ».
International Journal of Theoretical and Applied Nanotechnology, vol. 1, nº 1.
pp. 105-110.
Sins, Lauranne, Tetreault, Patrice, Petit, Yvan, Nuño, Natalia, Billuart, Fabien et Hagemeister, Nicola.
2012.
« Effect of glenoid implant design on glenohumeral stability: An experimental study ».
Clinical Biomechanics, vol. 27, nº 8.
pp. 782-788.
Sins, Lauranne, Tétreault, Patrice, Petit, Yvan, Nuño, Natalia, Billuart, Fabien et Hagemeister, Nicola.
2012.
« Effect of glenoid implant design on glenohumeral stability: an experimental study ».
[Article de conférence]. Journal of Biomechanics, vol. 45, Suppl. 1.
S552.
Slamani, Mohamed, Nubiola, Albert et Bonev, Ilian.
2012.
« Assessment of the positioning performance of an industrial robot ».
Industrial Robot, vol. 39, nº 1.
pp. 57-68.
Slamani, Mohamed, Nubiola, Albert et Bonev, Ilian.
2012.
« Effect of Servo systems on the contouring errors in industrial robots ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 36, nº 1.
pp. 83-96.
Slamani, Mohamed, Nubiola, Albert et Bonev, Ilian.
2012.
« Modeling and assessment of the backlash error of an industrial robot ».
Robotica, vol. 30, nº 7.
pp. 1167-1175.
Songmene, Victor, Khettabi, Riad et Kouam, Jules.
2012.
« Dry high-speed machining: A cost effective and green process ».
International Journal of Manufacturing Research, vol. 7, nº 3.
pp. 229-256.
Soulez, Gilles, Lerouge, Sophie, Allard, Louise, Roméo, Philippe, Qi, Shijie, Héon, Hélène, Tardif, Jean-Claude et Cloutier, Guy.
2012.
« Vulnerable Carotid Atherosclerotic Plaque Creation in a Swine Model: Evaluation of Stenosis Creation Using Absorbable and Permanent Suture in a Diabetic Dyslipidemic Model ».
Journal of Vascular and Interventional Radiology, vol. 23, nº 12.
pp. 1700-1708.
Steenhof, Paul, Weber, Chris, Brooks, Martin, Spence, John, Robinson, Randall, Simmonds, Rob, Kiddle, Cameron, Aikema, David, Savoie, Michel, Ho, Bobby, Lemay, Mathieu, Fung, Jonathan et Cheriet, Mohamed.
2012.
« A protocol for quantifying the carbon reductions achieved through the provision of low or zero carbon ICT services ».
Sustainable Computing: Informatics and Systems, vol. 2, nº 1.
pp. 23-32.
St-Georges-Robillard, Amelie, Ruiz, Juan-Carlos, Petit, Alain, Wang, Hong Tian, Mwale, Fackson, Elkin, Bentsian, Oehr, Christian, Lerouge, Sophie et Wertheimer, Michael R..
2012.
« Adhesion of U-937 monocytes on different amine-functionalised polymer surfaces ».
Plasma Processes and Polymers, vol. 9, nº 3.
pp. 243-252.
St-Pierre, Benoit, Chatelain, Jean-François et Dufresne, Louis.
2012.
« Développement d’un modèle semi-empirique pour la prédiction de la cohérence d’un jet utilisé dans les procédés de rectification ».
Transactions of the Canadian Society for Mechanical Engineering, vol. 36, nº 2.
pp. 127-142.
Sumner, Jonathon et Masson, Christian.
2012.
« K-ε simulations of the neutral atmospheric boundary layer: Analysis and correction of discretization errors on practical grids ».
International Journal for Numerical Methods in Fluids, vol. 70, nº 6.
pp. 724-741.
Sumner, Jonathon et Masson, Christian.
2012.
« The Apsley and Castro Limited-Length-Scale k- model revisited for improved performance in the atmospheric surface layer ».
Boundary-Layer Meteorology, vol. 144, nº 2.
pp. 199-215.
Sun, Jingchao, Rojas, Alban, Bertrand, Pierre., Petit, Yvan, Kraenzler, Reinhard et Arnoux, Pierre Jean.
2012.
« Investigation of motorcyclist cervical spine trauma using HUMOS model ».
Traffic Injury Prevention, vol. 13, nº 5.
pp. 519-528.
Sun, Shuhui, Zhang, Gaixia, Sun, Xueliang, Cai, Mei et Ruthkosky, Martin.
2012.
« Highly stable and active Pt/Nb-TiO 2 carbon-free electrocatalyst for proton exchange membrane fuel cells ».
Journal of Nanotechnology, vol. 2012.
Suryn, Witold et Trudeau, P. O..
2012.
« Information Systems Typology According to Quality Attributes ».
International Journal of Human Capital and Information Technology Professionals, vol. 3, nº 2.
pp. 16-24.
Tahan, A. S. et Cauvier, J..
2012.
« Capability estimation of geometrical tolerance with a material modifier by a Hasofer-Lind index ».
Journal of Manufacturing Science and Engineering, vol. 134, nº 2.
Tam, Wa James, Speranza, Filippo et Vázquez, Carlos.
2012.
« Problem-driven three-dimensional television research involving human visual perception studies ».
Japanese Psychological Research, vol. 54, nº 1.
pp. 89-104.
Tamadon, Abbas, Shokuhfar, Ali, Yoozbashizadeh, Hossein et Jahazi, Mohammad.
2012.
« The role of carbon nanotubes in synthesis of TaC nanoparticles by gas – solid reaction ».
Advanced Processes in Materials, vol. 6, nº 3 (22).
pp. 1-7.
Tanguay, Frederic, Labelle, Hubert, Wang, Zhi, Joncas, Julie, de Guise, Jacques A et Mac-Thiong, Jean-Marc.
2012.
« Clinical significance of lumbosacral kyphosis in adolescent spondylolisthesis ».
Spine, vol. 37, nº 4.
pp. 304-308.
Tani, Shuntaro, Blanchard, François et Tanaka, Koichiro.
2012.
« Ultrafast carrier dynamics in graphene under a high electric field ».
Physical Review Letters, vol. 109, nº 16.
p. 166603.
Thibeault, C., Hariri, Y. et Hobeika, C..
2012.
« Tester memory requirements and test application time reduction for delay faults with Digital Captureless test Sensors ».
Journal of Electronic Testing: Theory and Applications, vol. 28, nº 2.
pp. 229-242.
Thibeault, Claude, Pichette, Simon, Audet, Yves, Savaria, Yvon, Rufenacht, H., Gloutnay, E., Blaquière, Yves, Moupfouma, F. et Batani, Naïm.
2012.
« On extra combinational delays in SRAM FPGAs due to transient ionizing radiations ».
IEEE Transactions on Nuclear Science, vol. 59, nº 6.
pp. 2959-2965.
Thomson, Steven J., Ouellet-Plamondon, Claudiane M., DeFauw, Sherri L., Huang, Yanbo, Fisher, Daniel K. et English, Patrick J..
2012.
« Potential and challenges in use of thermal imaging for humid region irrigation system management ».
Journal of Agricultural Science, vol. 4, nº 4.
103 -116.
Toguyeni, David Y. K., Coulibaly, Ousmane, Ouedraogo, Abdoulaye, Koulidiati, Jean, Dutil, Yvan et Rousse, Daniel.
2012.
« Study of the influence of roof insulation involving local materials on cooling loads of houses built of clay and straw ».
Energy and Buildings, vol. 50.
pp. 74-80.
Tremblay, Jose-Philippe, Savaria, Yvon, Zhu, Guchuan, Thibeault, Claude et Bouanen, Safwen.
2012.
« A System Architecture for Smart Sensors Integration in Avionics Applications ».
SAE International Journal of Aerospace, vol. 5, nº 1.
pp. 189-195.
Trentin, Davide, Savaria, Yvon, Zhu, Guchuan et Thibeault, Claude.
2012.
« An AFDX Switch Fabric Hardware Core for Avionic Network Prototyping and Characterization ».
SAE International Journal of Aerospace, vol. 5, nº 1.
pp. 181-188.
Triki, Ennouri, Arrieta, Carlos, Boukehili, Hychem et Vu-Khanh, Toan.
2012.
« Tear behavior of polyester-based coated textiles after thermo-oxidative aging ».
Polymer Composites, vol. 33, nº 6.
pp. 1007-1017.
Triki, Ennouri, Nguyen-Tri, Phuong, Boukehili, Hychem et Vu-Khanh, Toan.
2012.
« Investigation of tearing mechanisms of woven textile ».
Polymer Composites, vol. 33, nº 9.
pp. 1578-1585.
Triki, Ennouri, Vu-Khanh, Toan, Nguyen-Tri, Phuong et Boukehili, Hychem.
2012.
« Mechanics and mechanisms of tear resistance of woven fabrics ».
Theoretical and Applied Fracture Mechanics, vol. 61, nº 1.
pp. 33-39.
Viau, C. et McGuffin, Michael John.
2012.
« ConnectedCharts: Explicit Visualization of Relationships between Data Graphics ».
Computer Graphics Forum, vol. 31, nº 3pt4.
pp. 1285-1294.
Villalpando, Fernando, Reggio, Marcelo et Ilinca, Adrian.
2012.
« Numerical study of flow around iced wind turbine airfoil ».
Engineering Applications of Computational Fluid Mechanics, vol. 6, nº 1.
pp. 39-45.
Vinches, Ludwig, Perron, Gérald, Dolez, Patricia, Wilkinson, Kevin J. et Hallé, Stéphane.
2012.
« Swelling of elastomers in solutions of TiO2 nanoparticles ».
ISRN Polymer Science, vol. 2012.
Vinches, Ludwing, Boulebrane, Yousra, Gérald, Perron., Hallé, Stéphane, Dolez, Patricia et J., Wilkinson. Kevin.
2012.
« Swelling of protective gloves in commercial TiO2 nanoparticles colloidal solutions ».
International Journal of Theoretical and Applied Nanotechnology, vol. 1, nº 1.
pp. 45-51.
Voix, Jérémie.
2012.
« Plateforme coopérative entre professeurs et étudiants facilitant la transmission et la documentation des résultats de recherche ».
Canadian Acoustics = Acoustique Canadienne, vol. 40, nº 2.
pp. 35-40.
Vriesmann, Leila Maria, De Souza Britto Jr, Alceu, De Oliveira, Luiz Eduardo Soares, Sabourin, Robert et Ko, Albert Houng-Ren.
2012.
« Improving a dynamic ensemble selection method based on oracle information ».
International Journal of Innovative Computing and Applications, vol. 4, nº 3-4.
pp. 184-200.
Wagnac, Éric, Arnoux, Pierre-Jean, Garo, Anaïs et Aubin, Carl-Eric.
2012.
« Finite element analysis of the influence of loading rate on a model of the full lumbar spine under dynamic loading conditions ».
Medical and Biological Engineering and Computing, vol. 50, nº 9.
pp. 903-915.
Wertheimer, Michael R., St-Georges-Robillard, Amélie, Lerouge, Sophie, Mwale, Fackson, Elkin, Bentsian, Oehr, Christian, Wirges, Werner et Gerhard, Reimund.
2012.
« Amine-Rich Organic Thin Films for Cell Culture: Possible Electrostatic Effects in Cell-Surface Interactions ».
Japanese Journal of Applied Physics, vol. 51, nº 11pt2.
Worrell, G. A., Jerbi, K., Kobayashi, K., Lina, Jean-Marc, Zelmann, R. et Le Van Quyen, M..
2012.
« Recording and analysis techniques for high-frequency oscillations ».
Progress in Neurobiology, vol. 98, nº 3.
pp. 265-278.
Xu, Fan, Benavides, Jaime, Ma, Xin et Cloutier, Sylvain G..
2012.
« Interconnected TiO2 nanowire networks for PbS quantum dot solar cell applications ».
Journal of Nanotechnology.
Yeste Ojeda, Omar A. et Grajal, Jesus.
2012.
« Sensitivity analysis of cyclostationarity-based and radiometric detectors for single-sensor receivers ».
IEEE Transactions on Aerospace and Electronic Systems, vol. 48, nº 1.
pp. 27-43.
Zaghbani, Imed, Chatelain, Jean-Fraçois, Songmene, Victor, Bérubé, Sébastien et Atarsia, Abdelatif.
2012.
« A comprehensive analysis of cutting forces during routing of multilayer carbon fiber-reinforced polymer laminates ».
Journal of Composite Materials, vol. 46, nº 16.
pp. 1955-1971.
Zaghbani, Imed, Chatelain, Jean-François, Bérubé, Sébastien, Songmene, Victor et Lance, Justin.
2012.
« Analysis and modelling of cutting forces during the trimming of unidirectional CFRP composite laminates ».
International Journal of Machining and Machinability of Materials, vol. 12, nº 4.
pp. 337-357.
Zaghbani, Imed, Jomaa, Walid, Songmene, Victor, L. Boire, Louis-Philippe et Lehuy, Hoang.
2012.
« Investigation on tool wear during dry and wet machining of hardened mould steels ».
International Journal of Civil Engineering and Building Materials, vol. 2, nº 3.
pp. 124-131.
Zalewski, Laurent, Joulin, Annabelle, Lassue, Stephane, Dutil, Yvan et Rousse, Daniel.
2012.
« Experimental study of small-scale solar wall integrating phase change material ».
Solar Energy, vol. 86, nº 1.
pp. 208-219.
Zedan, Yasser, Khettabi, Riad, Zaghbani, Imed, Kouam, Jules, Masounave, Jacques et Songmene, Victor.
2012.
« Experimental investigation of cutting fluid influence on drilled aluminum part quality ».
International Journal of Civil Engineering and Building Materials, vol. 2, nº 2.
pp. 78-84.
Zhang, X. C., Chen, J., Garbrecht, J. D. et Brissette, François.
2012.
« Evaluation of a weather generator-based method for statistically downscaling non-stationary climate scenarios for impact assessment at a point scale ».
Transactions of the ASABE, vol. 55, nº 5.
pp. 1745-1756.
Zhang, Yi-Nan, Kevorkov, Dmytro, Liu, Xue Dong, Bridier, Florent, Chartrand, Patrice et Medraj, Mamoun.
2012.
« Homogeneity range and crystal structure of the Ca2Mg 5Zn13 compound ».
Journal of Alloys and Compounds, vol. 523.
pp. 75-82.
Zhong, Yu, Zhang, Yong, Zhang, Gaixia, Li, Ruying et Sun, Xueliang.
2012.
« Site-controlled synthesis and mechanism of three-dimensional Mo2S3 flowers ».
Applied Surface Science, vol. 263.
pp. 410-415.
Zokagoa, Jean-Marie et Soulaimani, Azzeddine.
2012.
« A POD-based reduced-order model for free surface shallow water flows over real bathymetries for Monte-Carlo-type applications ».
Computer Methods in Applied Mechanics and Engineering, vol. 221-222.
pp. 1-23.
Zokagoa, Jean-Marie et Soulaimani, Azzeddine.
2012.
« Low-order modelling of shallow water equations for sensitivity analysis using proper orthogonal decomposition ».
International Journal of Computational Fluid Dynamics, vol. 26, nº 5.
pp. 275-295. |
![[Monter]](/style/images/multi_up.png)
Monter d'un niveau