ENGLISH
La vitrine de diffusion des publications et contributions des chercheurs de l'ÉTS
RECHERCHER

Liste des publications de "Kenné, Jean-Pierre"

Exporter en format [Atom feed] Atom [RSS feed] RSS 1.0 [RSS2 feed] RSS 2.0
Groupement par Année | Type de document | Sans groupement
Nombre de documents archivés : 224.

Article publié dans une revue, révisé par les pairs

Al Aela, Ahmed Mohamed, Kenné, Jean-Pierre et Mintsa, Honorine Angue. 2020. « A novel adaptive and nonlinear electrohydraulic active suspension control system with zero dynamic tire liftoff ». Machines, vol. 8, nº 3.
Compte des citations dans Scopus : 10.

Al Aela, Amhmed M., Kenne, Jean-Pierre et Mintsa, Honorine A.. 2022. « Adaptive neural network and nonlinear electrohydraulic active suspension control system ». Journal of Vibration and Control, vol. 28, nº 3-4. pp. 243-259.
Compte des citations dans Scopus : 29.

Angue Mintsa, Honorine, Venugopal, Ravinder, Kenné, Jean-Pierre et Belleau, Christian. 2012. « Feedback linearization-based position control of an electrohydraulic servo system with supply pressure uncertainty ». IEEE Transactions on Control Systems Technology, vol. 20, nº 4. pp. 1092-1099.
Compte des citations dans Scopus : 95.

Badiane, Abdoulaye, Nadeau, Sylvie, Kenné, Jean-Pierre et Polotski, Vladimir. 2016. « Optimizing production while reducing machinery lockout/tagout circumvention possibilities ». Journal of Quality in Maintenance Engineering, vol. 22, nº 2. pp. 188-201.
Compte des citations dans Scopus : 5.

Berthaut, F., Gharbi, Ali, Kenné, Jean-Pierre et Boulet, J. F.. 2010. « Improved joint preventive maintenance and hedging point policy ». International Journal of Production Economics, vol. 127, nº 1. pp. 60-72.
Compte des citations dans Scopus : 40.

Boulet, J. F., Gharbi, Ali et Kenné, Jean-Pierre. 2009. « Multiobjective optimization in an unreliable failure-prone manufacturing system ». Journal of Quality in Maintenance Engineering, vol. 15, nº 4. pp. 397-411.
Compte des citations dans Scopus : 19.

Charlot, E., Kenné, Jean Pierre et Nadeau, Sylvie. 2007. « Optimal production, maintenance and lockout/tagout control policies in manufacturing systems ». International Journal of Production Economics, vol. 107, nº 2. pp. 435-450.
Compte des citations dans Scopus : 22.

Dehayem Nodem, F.I., Kenné, Jean-Pierre et Gharbi, Ali. 2008. « Joint optimization of capacity expansion, production and maintenance in stochastic manufacturing systems ». Applied Mathematical Sciences, vol. 2, nº 5. pp. 195-212.

Dehayem Nodem, Fleur Ines, Gharbi, Ali et Kenné, Jean-Pierre. 2011. « Preventive maintenance and replacement policies for deteriorating production systems subject to imperfect repairs ». International Journal of Production Research, vol. 49, nº 12. pp. 3543-3563.
Compte des citations dans Scopus : 24.

Dehayem Nodem, Fleur Ines, Kenné, Jean-Pierre et Gharbi, Ali. 2011. « Production planning and repair/replacement switching policy for deteriorating manufacturing systems ». International Journal of Advanced Manufacturing Technology, vol. 57, nº 5-8. pp. 827-840.
Compte des citations dans Scopus : 22.

Dehayem Nodem, Fleur Ines, Kenné, Jean-Pierre et Gharbi, Ali. 2011. « Simultaneous control of production, repair/replacement and preventive maintenance of deteriorating manufacturing systems ». International Journal of Production Economics, vol. 134, nº 1. pp. 271-282.
Compte des citations dans Scopus : 71.

Dehayem Nodem, Fleur, Kenné, Jean-Pierre et Gharbi, Ali. 2009. « Hierarchical decision making in production and repair/replacement planning with imperfect repairs under uncertainties ». European Journal of Operational Research, vol. 198, nº 1. pp. 173-189.
Compte des citations dans Scopus : 33.

Dehayem Nodem, Fleur, Kenné, Jean-Pierre et Gharbi, Ali. 2010. « Preventive maintenance and replacement policies for deteriorating manufacturing systems ». [Article de conférence]. IFAC Proceedings Volumes, vol. 43, nº 3. pp. 98-103.

Delpla, Victor, Chapron, Kevin, Kenne, Jean-Pierre et Hof, Lucas. 2022. « Towards intelligent manufacturing system safety strategies: generating LockOut/TagOut sheets by Machine Learning - a case study ». IFAC-PapersOnLine, vol. 55, nº 10. pp. 1001-1006.
Compte des citations dans Scopus : 1.

Delpla, Victor, Chapron, Kevin, Kenné, Jean-Pierre et Hof, Lucas A.. 2023. « A novel approach for predicting Lockout/Tagout safety procedures for smart maintenance strategies ». International Journal of Production Research.
(Sous presse)

Delpla, Victor, Kenné, Jean-Pierre et Hof, Lucas A.. 2022. « Circular manufacturing 4.0: Towards internet of things embedded closed-loop supply chains ». The International Journal of Advanced Manufacturing Technology, vol. 118. pp. 3241-3264.
Compte des citations dans Scopus : 24.

Delpla, Victor, Kenné, Jean-Pierre et Hof, Lucas A.. 2023. « Integration of operational lockout/tagout in a joint production and maintenance policy of a smart production system ». International Journal of Production Economics, vol. 263.
Compte des citations dans Scopus : 1.

Diep, Thang T., Kenné, Jean-Pierre et Dao, Thien-My. 2010. « Feedback optimal control of dynamic stochastic two-machine flowshop with a finite buffer ». International Journal of Industrial Engineering Computations, vol. 1, nº 2. pp. 95-120.
Compte des citations dans Scopus : 3.

Dongmo Tambah, Kevin Gildas, Kenné, Jean-Pierre et Songmene, Victor. 2023. « Preventive maintenance and silica exposure limits integrated in the production planning of a granite processing unit ». Journal of Quality in Maintenance Engineering, vol. 29, nº 1. pp. 1-26.
Compte des citations dans Scopus : 1.

Emami-Mehrgani, Behnam, Kenné, Jean-Pierre et Nadeau, Sylvie. 2013. « Lockout/tagout and optimal production control policies in failure-prone non-homogenous transfer lines with passive redundancy ». International Journal of Production Research, vol. 51, nº 4. pp. 1006-1023.
Compte des citations dans Scopus : 9.

Emami-Mehrgani, Behnam, Nadeau, Sylvie et Kenné, Jean-Pierre. 2011. « Lockout/tagout and operational risks in the production control of manufacturing systems with passive redundancy ». International Journal of Production Economics, vol. 132, nº 2. pp. 165-173.
Compte des citations dans Scopus : 15.

Emami-Mehrgani, Behnam, Nadeau, Sylvie et Kenné, Jean-Pierre. 2014. « Optimal lockout/tagout, preventive maintenance, human error and production policies of manufacturing systems with passive redundancy ». Journal of Quality in Maintenance Engineering, vol. 20, nº 4. pp. 453-470.
Compte des citations dans Scopus : 6.

Emami-Mehrgani, Behnam, Nadeau, Sylvie et Kenné, Jean-Pierre. 2011. « Temps moyen de cadenassage/décadenassage : un outil d’optimisation des politiques de surveillance et de maintenance ». [Résumé d'une communication à une conférence]. Travail et Santé, vol. 27, nº 4. p. 22.

Gharbi, A., Kenné, J. P. et Kaddachi, R.. 2022. « Dynamic optimal control and simulation for unreliable manufacturing systems under perishable product and shelf life variability ». International Journal of Production Economics, vol. 247.
Compte des citations dans Scopus : 12.

Gharbi, Ali et Kenné, Jean Pierre. 2005. « Maintenance scheduling and production control of multiple-machine manufacturing systems ». Computers & Industrial Engineering, vol. 48, nº 4. pp. 693-707.
Compte des citations dans Scopus : 84.

Gharbi, Ali et Kenné, Jean Pierre. 2003. « Optimal production control problem in stochastic multiple-product multiple-machine manufacturing systems ». IIE Transactions, vol. 35, nº 10. pp. 941-952.
Compte des citations dans Scopus : 55.

Gharbi, Ali et Kenné, Jean Pierre. 2000. « Production and preventive maintenance rates control for a manufacturing system : an experimental design approach ». International Journal of Production Economics, vol. 65, nº 3. pp. 275-287.
Compte des citations dans Scopus : 93.

Gharbi, Ali, Kenné, Jean-Pierre et Beit, M.. 2007. « Optimal safety stocks and preventive maintenance periods in unreliable manufacturing systems ». International Journal of Production Economics, vol. 107, nº 2. pp. 422-434.
Compte des citations dans Scopus : 60.

Gharbi, Ali, Kenné, Jean-Pierre et Hajji, A.. 2006. « Operational level-based policies in production rate control of unreliable manufacturing systems with setups ». International Journal of Production Research, vol. 44, nº 3. pp. 545-567.
Compte des citations dans Scopus : 36.

Ghimouz, Chahine, Kenné, Jean-Pierre et Hof, Lucas A.. 2023. « On sustainable design and manufacturing for the footwear industry – Towards circular manufacturing ». Materials and Design, vol. 233.

Hajji, A., Gharbi, A. et Kenné, J. P.. 2009. « Production and changeover control policies of failure prone buffered flow-shops ». [Article de conférence]. IFAC Proceedings Volumes, vol. 42, nº 4. pp. 1108-1113.
Compte des citations dans Scopus : 1.

Hajji, A., Gharbi, Ali et Kenné, Jean-Pierre. 2006. « Joint production and supply control in three levels flexible manufacturing systems ». [Article de conférence]. IFAC Proceedings Volumes, vol. 39, nº 3. pp. 149-154.

Hajji, Adnene, Gharbi, Ali et Kenné, Jean-Pierre. 2009. « Joint optimal production / changeover policies for n families of products in unreliable supply chains ». Journal of Operations and Logistics, vol. 2, nº 4. VI.1-VI.16.

Hajji, Adnene, Gharbi, Ali et Kenné, Jean-Pierre. 2010. « Joint production and supply control in three levels flexible manufacturing systems ». Journal of Intelligent Manufacturing, vol. 21, nº 2. pp. 195-204.
Compte des citations dans Scopus : 2.

Hajji, Adnene, Gharbi, Ali et Kenné, Jean-Pierre. 2009. « Joint replenishment and manufacturing activities control in a two stage unreliable supply chain ». International Journal of Production Research, vol. 47 , nº 12. pp. 3231-3251.
Compte des citations dans Scopus : 34.

Hajji, Adnene, Gharbi, Ali et Kenné, Jean-Pierre. 2004. « Production and set-up control of a failure-prone manufacturing system ». International Journal of Production Research, vol. 42, nº 6. pp. 1107-1130.
Compte des citations dans Scopus : 20.

Hajji, Adnene, Gharbi, Ali, Kenné, Jean-Pierre et Hidehiko, Yamamoto. 2009. « Production and changeover control policies of a class of failure prone buffered flow-shops ». Production Planning & Control, vol. 20, nº 8. pp. 785-800.
Compte des citations dans Scopus : 10.

Hajji, Adnene, Gharbi, Ali, Kenné, Jean-Pierre et Pellerin, Robert. 2011. « Production control and replenishment strategy with multiple suppliers ». European Journal of Operational Research, vol. 208, nº 1. pp. 67-74.
Compte des citations dans Scopus : 40.

Kaddachi, Rawia, Gharbi, Ali et Kenné, Jean-Pierre. 2022. « Integrated production and maintenance control policies for failure-prone manufacturing systems producing perishable products ». International Journal of Advanced Manufacturing Technology, vol. 119, nº 7-8. pp. 4635-4657.
Compte des citations dans Scopus : 5.

Kaddissi, Claude, Kenné, Jean-Pierre et Saad, Maarouf. 2007. « Identification and real-time control of an electrohydraulic servo system based on nonlinear backstepping ». IEEE/ASME Transactions on Mechatronics, vol. 12, nº 1. pp. 12-22.
Compte des citations dans Scopus : 183.

Kaddissi, Claude, Kenné, Jean-Pierre et Saad, Maarouf. 2011. « Indirect adaptive control of an electrohydraulic servo system based on nonlinear backstepping ». IEEE/ASME Transactions on Mechatronics, vol. 16, nº 6. pp. 1171-1177.
Compte des citations dans Scopus : 113.

Kaddissi, Claude, Saad, Maarouf et Kenné, Jean-Pierre. 2009. « Interlaced backstepping and integrator forwarding for nonlinear control of an electrohydraulic active suspension ». Journal of Vibration and Control, vol. 15, nº 1. pp. 101-131.
Compte des citations dans Scopus : 21.

Kamguem, René, Songmene, Victor, Kenné, Jean-Pierre et Tahan, Souheil Antoine. 2012. « Vision-based surface roughness inspection of machined aluminium parts ». International Journal of Machining and Machinability of Materials, vol. 12, nº 3. pp. 215-235.
Compte des citations dans Scopus : 3.

Kenmeugne, B., Soh Fotsing, B. D., Anago, G. F., Fogue, M., Robert, J. L. et Kenne, J. P.. 2012. « On the evolution and comparison of multiaxial fatigue criteria ». International Journal of Engineering and Technology, vol. 4, nº 1. pp. 37-46.
Compte des citations dans Scopus : 13.

Kenné, Jean Pierre et Boukas, E. K.. 2003. « Hierarchical control of production and maintenance rates in manufacturing systems ». Journal of Quality in Maintenance Engineering, vol. 9, nº 1. pp. 66-82.
Compte des citations dans Scopus : 44.

Kenné, Jean Pierre, Boukas, E. K. et Gharbi, Ali. 2003. « Control of production and corrective maintenance rates in a multiple-machine, multiple-product manufacturing system ». Mathematical and Computer Modelling, vol. 38, nº 3-4. pp. 351-365.
Compte des citations dans Scopus : 65.

Kenné, Jean Pierre et Gharbi, Ali. 2001. « A simulation optimization approach in production planning of failure prone manufacturing systems ». Journal of Intelligent Manufacturing, vol. 12, nº 5-6. pp. 421-431.
Compte des citations dans Scopus : 44.

Kenné, Jean Pierre et Gharbi, Ali. 1999. « Experimental design in production and maintenance control problem of a single machine, single product manufacturing system ». International Journal of Production Research, vol. 37, nº 3. pp. 621-637.
Compte des citations dans Scopus : 47.

Kenné, Jean Pierre et Gharbi, Ali. 2000. « Production planning problem in manufacturing systems with general failure and repair time distributions ». Production Planning and Control, vol. 11, nº 6. pp. 581-588.
Compte des citations dans Scopus : 34.

Kenné, Jean Pierre et Gharbi, Ali. 2004. « Stohastic optimal production control problem with corrective maintenance ». Computers & Industrial Engineering, vol. 46, nº 4. pp. 865-875.
Compte des citations dans Scopus : 47.

Kenné, Jean Pierre, Gharbi, Ali et Boukas, E. K.. 1997. « Control policy simulation based on machine age in a failure prone one-machine, one-product manufacturing system ». International Journal of Production Research, vol. 35, nº 5. pp. 1431-1445.
Compte des citations dans Scopus : 16.

Kenné, Jean Pierre et Nkeungoue, L. J.. 2008. « Simultaneous control of production, preventive and corrective maintenance rates of a failure-prone manufacturing system ». Applied Numerical Mathematics, vol. 58, nº 2. pp. 180-194.
Compte des citations dans Scopus : 66.

Kenné, Jean-Pierre. 2004. « Commande optimale stochastique appliquée à la gestion de production d'une unité de fabrication ». Journal Européen des Systèmes Automatisés, vol. 38, nº 3-4. pp. 269-290.

Kenné, Jean-Pierre, Dejax, Pierre et Gharbi, Ali. 2012. « Production planning of a hybrid manufacturing-remanufacturing system under uncertainty within a closed-loop supply chain ». International Journal of Production Economics, vol. 135, nº 1. pp. 81-93.
Compte des citations dans Scopus : 236.

Kenné, Jean-Pierre et Gharbi, Ali. 2004. « A simulation optimization based control policy for failure prone one-machine, two-product manufacturing systems ». Computers & Industrial Engineering, vol. 46, nº 2. pp. 285-292.
Compte des citations dans Scopus : 19.

Kenné, Jean-Pierre, Gharbi, Ali et Beit, M.. 2007. « Age-dependent production planning and maintenance strategies in unreliable manufacturing systems with lost sale ». European Journal of Operational Research, vol. 178, nº 2. pp. 408-420.
Compte des citations dans Scopus : 74.

Kenné, Jean-Pierre, Gharbi, Ali et Najid, Najib M.. 2009. « On the integrated production, inventory and preventive maintenance problem in manufacturing systems with backorder ». International Journal of Simulation and Process Modelling, vol. 5, nº 4. pp. 300-312.
Compte des citations dans Scopus : 4.

Kibouka, Guy Richard, Nganga-Kouya, Donatien, Kenné, Jean-Pierre, Polotski, Vladimir et Songmene, Victor. 2018. « Maintenance and setup planning in manufacturing systems under uncertainties ». Journal of Quality in Maintenance Engineering, vol. 24, nº 2. pp. 170-184.
Compte des citations dans Scopus : 8.

Kibouka, Guy-Richard, Nganga-Kouya, Donatien, Kenne, Jean-Pierre, Songmene, Victor et Polotski, Vladimir. 2016. « Production planning of a failure-prone manufacturing system under different setup scenarios ». Journal of Applied Mathematics, vol. 2016.
Compte des citations dans Scopus : 2.

Kouedeu, A. F., Kenné, J.-P., Dejax, P., Songmene, V. et Polotski, V.. 2015. « Production and maintenance planning for a failure-prone deteriorating manufacturing system: a hierarchical control approach ». International Journal of Advanced Manufacturing Technology, vol. 76, nº 9. pp. 1607-1619.
Compte des citations dans Scopus : 32.

Kouedeu, Annie Francie, Kenné, Jean-Pierre, Dejax, Pierre, Songmene, Victor et Polotski, Vladimir. 2013. « Analytical modelling and control of a hybrid manufacturing/remanufacturing system ». [Article de conférence]. IFAC Proceedings Volumes, vol. 46, nº 9. pp. 401-406.
Compte des citations dans Scopus : 1.

Kouedeu, Annie Francie, Kenné, Jean-Pierre, Dejax, Pierre, Songmene, Victor et Polotski, Vladimir. 2014. « Production planning of a failure-prone manufacturing/remanufacturing system with production-dependent failure rates ». Applied Mathematics, vol. 5, nº 10. pp. 1557-1572.

Kouedeu, Annie Francie, Kenné, Jean-Pierre, Dejax, Pierre, Songmene, Victor et Polotski, Vladimir. 2014. « Stochastic optimal control of manufacturing systems under production-dependent failure rates ». International Journal of Production Economics, vol. 150. pp. 174-187.
Compte des citations dans Scopus : 18.

Lavoie, P., Kenné, Jean Pierre et Gharbi, Ali. 2007. « Production control and combined discrete/continuous simulation modeling in failure-prone transfer lines ». International Journal of Production Research, vol. 45, nº 24. pp. 5667-5685.
Compte des citations dans Scopus : 15.

Lavoie, Philippe, Gharbi, Ali et Kenné, Jean-Pierre. 2010. « A comparative study of pull control mechanisms for unreliable homogenous transfer lines ». International Journal of Production Economics, vol. 124, nº 1. pp. 241-251.
Compte des citations dans Scopus : 43.

Lavoie, Philippe, Kenné, Jean-Pierre et Gharbi, Ali. 2009. « Optimization of production control policies in failure-prone homogenous transfer lines ». IIE Transactions, vol. 41, nº 3. pp. 209-222.
Compte des citations dans Scopus : 14.

Mandatsy Moungomo, J. B., Nganga-Kouya, D., Songmene, V., Kouam, J. et Kenné, J. P.. 2016. « Machinability study of recycled aluminum cans and machining chips ». International Journal of Advanced Manufacturing Technology, vol. 87, nº 9. pp. 2551-2566.
Compte des citations dans Scopus : 12.

Megoze Pongha, Patrick, Kenné, Jean-Pierre, De Jesus Garcia, Edgar et Hof, Lucas A.. 2023. « Optimal joint production, maintenance and product quality control policies for a continuously deteriorating manufacturing system ». International Journal of Modelling and Simulation, vol. 43, nº 3. pp. 135-152.
Compte des citations dans Scopus : 1.

Mejía-Moncayo, Camilo, Kenné, Jean-Pierre et Hof, Lucas A.. 2024. « A reconfigurable cellular remanufacturing architecture: A multi-objective design approach ». Journal of Remanufacturing.
(Sous presse)

Mejía-Moncayo, Camilo, Kenné, Jean-Pierre et Hof, Lucas A.. 2023. « On the development of a smart architecture for a sustainable manufacturing-remanufacturing system: A literature review approach ». Computers and Industrial Engineering, vol. 180.
Compte des citations dans Scopus : 2.

Mejia-Moncayo, Camilo, Rojas, Alix E., Kenne, Jean-Pierre et Hof, Lucas A.. 2022. « An ant approach to define product families and remanufacturing cells ». [Article de conférence]. IFAC-PapersOnLine, vol. 55, nº 10. pp. 73-78.
Compte des citations dans Scopus : 2.

Mintsa, Honorine Angue, Eny, Gérémino Ella, Senouveau, Nzamba, Kenné, Jean-Pierre et Nzué, Rolland Michel Assoumou. 2023. « An alternative nonlinear lyapunov redesign velocity controller for an electrohydraulic drive ». Journal of Robotics and Control (JRC), vol. 4, nº 2. pp. 192-201.
Compte des citations dans Scopus : 3.

Mohafida, Abdelmoula, Ourasseb, Amine Ait, Kenné, Jean-Pierre et Benjellounb, Khalid. 2018. « Production and corrective maintenance control of a manufacturing system subject to imperfect repairs ». International Journal of Trend in Research and Development, nº Special issue. pp. 43-48.

Nadeau, Sylvie, Kenné, Jean-Pierre et Alexandru, Paul. 2010. « Modeling the integration of occupational health and safety risks with operational risks associated with autonomous and multi-skilled work performed in uncertain environments ». Revue Internationale sur l’Ingénierie des Risques Industriels, vol. 3, nº 1. pp. 17-31.

Nadeau, Sylvie, Kenné, Jean-Pierre, Emami-Mehrgani, Behnam et Badri, Adel. 2016. « Advances in integration of equipment lockout/tagout, determination of actual production capacity and production/maintenance planning ». Safety Science Monitor, vol. 19, nº 2.

Niknam, Seyed Ali, Kamguem, René, Songmene, Victor et Kenné, Jean-Pierre. 2010. « Machining factors influence on acoustic emission parameters ». International Journal of Advances in Machining and Forming Operations, vol. 2, nº 2. pp. 91-114.

Njike, Achille N., Pellerin, Robert et Kenné, Jean Pierre. 2012. « Simultaneous control of maintenance and production rates of a manufacturing system with defective products ». Journal of Intelligent Manufacturing, vol. 23, nº 2. pp. 323-332.
Compte des citations dans Scopus : 21.

Njike, Achille N., Pellerin, Robert et Kenné, Jean-Pierre. 2011. « Maintenance/production planning with interactive feedback of product quality ». Journal of Quality in Maintenance Engineering, vol. 17, nº 3. pp. 281-298.
Compte des citations dans Scopus : 10.

Olufayo, Oluwole, Songmene, Victor, Kenné, Jean-Pierre et Ayomoh, Michael. 2021. « Modelling for cost and productivity optimisation in sustainable manufacturing: a case of dry versus wet machining of mould steels ». International Journal of Production Research, vol. 59, nº 17. pp. 5352-5371.
Compte des citations dans Scopus : 3.

Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali. 2011. « Hierarchical control of production with stochastic demand in manufacturing systems ». Advanced Modeling and Optimization, vol. 13, nº 3. pp. 419-443.

Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali. 2018. « Joint production and replacement planning for an unreliable manufacturing system subject to random demand and quality ». [Article de conférence]. IFAC-PapersOnLine, vol. 51, nº 11. pp. 951-956.
Compte des citations dans Scopus : 4.

Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali. 2019. « Production and replacement planning of a deteriorating remanufacturing system in a closed-loop configuration ». Journal of Manufacturing Systems, vol. 53. pp. 234-248.
Compte des citations dans Scopus : 19.

Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali. 2018. « Production and replacement policies for a deteriorating manufacturing system under random demand and quality ». European Journal of Operational Research, vol. 264, nº 2. pp. 623-636.
Compte des citations dans Scopus : 36.

Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali. 2018. « Stochastic optimal control of random quality deteriorating hybrid manufacturing/remanufacturing systems ». Journal of Manufacturing Systems, vol. 49. pp. 172-185.
Compte des citations dans Scopus : 26.

Ouaret, Samir, Kenné, Jean-Pierre, Gharbi, Ali et Polotski, Vladimir. 2017. « Age-dependent production and replacement strategies in failure-prone manufacturing systems ». Proceedings of the Institution of Mechanical Engineers, Part B : Journal of Engineering Manufacture, vol. 231, nº 3. pp. 540-554.
Compte des citations dans Scopus : 10.

Ouaret, Samir, Kenné, Jean-Pierre, Gharbi, Ali et Polotski, Vladimir. 2015. « Joint production and replacement strategy for a quality deteriorating failure-prone manufacturing system ». [Article de conférence]. IFAC-PapersOnLine, vol. 48, nº 3. pp. 1198-1203.
Compte des citations dans Scopus : 4.

Ouaret, Samir, Polotski, Vladimir, Kenné, Jean-Pierre et Gharbi, Ali. 2013. « Manufacturing-remanufacturing failure-prone systems under random demands ». [Article de conférence]. IFAC Proceedings Volumes, vol. 46, nº 9. pp. 1620-1625.

Ouhaman, Assia Ait, Benjelloun, Khalid, Kenné, Jean Pierre et Najid, Najib. 2020. « The storage space allocation problem in a dry bulk terminal: A heuristic solution ». IFAC - Papers Online, vol. 53, nº 2. pp. 10822-10827.
Compte des citations dans Scopus : 2.

Pantoja, Francisco G., Songmene, Victor, Kenné, Jean-Pierre, Olufayo, Oluwole A. et Ayomoh, Michael. 2018. « Development of a tool cost optimization model for stochastic demand of machined products ». Applied Mathematics, vol. 9, nº 12. pp. 1395-1423.

Parent, Luc, Songmene, Victor et Kenné, Jean Pierre. 2007. « A generalised model for optimising an end milling operation ». Production Planning & Control , vol. 18, nº 4. pp. 319-337.
Compte des citations dans Scopus : 6.

Pellerin, Robert, Boulet, Jean-François, Gharbi, Ali et Kenné, Jean-Pierre. 2007. « Développement d'une politique intégrée de contrôle des taux de production et de maintenance corrective avec diagnostic ». INFOR : Information Systems and Operational Research, vol. 45, nº 4. pp. 197-207.
Compte des citations dans Scopus : 3.

Piengang, Fabrice Chilly Ngamaleu, Beauregard, Yvan et Kenné, Jean-Pierre. 2019. « An APS software selection methodology integrating experts and decisions-maker’s opinions on selection criteria: a case study ». Cogent Engineering, vol. 6, nº 1.
Compte des citations dans Scopus : 15.

Polotski, V., Gharbi, A. et Kenne, J. P.. 2022. « Production control in manufacturing systems with perishable products under periodic demand ». Journal of Manufacturing Systems, vol. 63. pp. 288-303.
Compte des citations dans Scopus : 4.

Polotski, V., Kenne, J. P. et Gharbi, A.. 2019. « Joint production and maintenance optimization in flexible hybrid manufacturing-remanufacturing systems under age-dependent deterioration ». International Journal of Production Economics, vol. 216. pp. 239-254.
Compte des citations dans Scopus : 47.

Polotski, V., Kenne, J. P. et Gharbi, A.. 2020. « Kalman filter based production control of a failure-prone single-machine single-product manufacturing system with imprecise demand and inventory information ». Journal of Manufacturing Systems, vol. 56. pp. 558-572.
Compte des citations dans Scopus : 13.

Polotski, Vladimir et Kenne, Jean-Pierre. 2017. « Adaptive control of manufacturing systems with incomplete information about demand and inventory ». [Article de conférence]. IFAC-PapersOnLine, vol. 50, nº 1. pp. 15598-15603.
Compte des citations dans Scopus : 9.

Polotski, Vladimir, Kenné, Jean-Pierre et Gharbi, Ali. 2023. « Estimation-based production control of manufacturing–remanufacturing systems with uncertain seasonal return and imprecise demand and inventory ». International Journal of Production Research.
(Sous presse)

Polotski, Vladimir, Kenné, Jean-Pierre et Gharbi, Ali. 2015. « Failure-prone manufacturing systems with setups: feasibility and optimality under various hypotheses about perturbations and setup interplay ». International Journal of Mathematics in Operational Research, vol. 7, nº 6. pp. 681-705.
Compte des citations dans Scopus : 4.

Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali. 2019. « Optimal production and corrective maintenance in a failure-prone manufacturing system under variable demand ». Flexible Services and Manufacturing Journal, vol. 31, nº 4. pp. 894-925.
Compte des citations dans Scopus : 11.

Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali. 2015. « Optimal production scheduling for hybrid manufacturing-remanufacturing systems with setups ». Journal of Manufacturing Systems, vol. 37. pp. 703-714.
Compte des citations dans Scopus : 32.

Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali. 2015. « Production and setup policy optimization for hybrid manufacturing-remanufacturing systems ». [Article de conférence]. IFAC-PapersOnLine, vol. 48, nº 3. pp. 2021-2026.
Compte des citations dans Scopus : 3.

Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali. 2017. « Production and setup policy optimization for hybrid manufacturing–remanufacturing systems ». International Journal of Production Economics, vol. 183, Part B. pp. 322-333.
Compte des citations dans Scopus : 38.

Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali. 2016. « Production policy optimization in flexible manufacturing-remanufacturing systems ». [Article de conférence]. IFAC - Papers Online, vol. 49, nº 12. pp. 295-300.
Compte des citations dans Scopus : 3.

Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali. 2017. « Set-up and production planning in hybrid manufacturing-remanufacturing systems with large returns ». International Journal of Production Research, vol. 55, nº 13. pp. 3766-3787.
Compte des citations dans Scopus : 16.

Polotski, Vladmir, Gharbi, Ali et Kenne, Jean-Pierre. 2021. « Production control of unreliable manufacturing systems with perishable inventory ». International Journal of Advanced Manufacturing Technology, vol. 116, nº 7-8. pp. 2473-2496.
Compte des citations dans Scopus : 10.

Polotski, Vladmir, Kenné, Jean-Pierre et Gharbi, Ali. 2019. « Production control of hybrid manufacturing-remanufacturing systems under demand and return variations ». International Journal of Production Research, vol. 57, nº 1. pp. 100-123.
Compte des citations dans Scopus : 32.

Pongha, Patrick Megoze, Kibouka, Guy-Richard, Kenné, Jean-Pierre et Hof, Lucas A.. 2022. « Production, maintenance and quality inspection planning of a hybrid manufacturing/remanufacturing system under production rate-dependent deterioration ». International Journal of Advanced Manufacturing Technology, vol. 121. pp. 1289-1314.
Compte des citations dans Scopus : 11.

Rahman, M. H., Kittel-Ouimet, T., Saad, Maarouf, Kenné, Jean-Pierre et Archambault, P. S.. 2011. « Dynamic modeling and evaluation of a robotic exoskeleton for upper-limb rehabilitation ». International Journal of Information Acquisition, vol. 8, nº 1. pp. 83-102.

Rahman, M. H., Kittel-Ouimet, T., Saad, Maarouf, Kenné, Jean-Pierre et Archambault, P. S.. 2011. « Robot assisted rehabilitation for elbow and forearm movements ». International Journal of Biomechatronics and Biomedical Robotics, vol. 1, nº 4. pp. 206-218.

Rahman, M. H., Ouimet, T. K., Saad, Maarouf, Kenné, Jean-Pierre et Archambault, P. S.. 2012. « Development of a 4DoFs exoskeleton robot for passive arm movement assistance ». International Journal of Mechatronics and Automation, vol. 2, nº 1. pp. 34-50.
Compte des citations dans Scopus : 23.

Rahman, M. H., Rahman, M. J., Cristobal, O. L., Saad, Maarouf, Kenné, Jean-Pierre et Archambault, P. S.. 2015. « Development of a whole arm wearable robotic exoskeleton for rehabilitation and to assist upper limb movements ». Robotica, vol. 33, nº 1. pp. 19-39.
Compte des citations dans Scopus : 157.

Rahman, Mohammad H., Saad, Maarouf, Kenné, Jean-Pierre et Archambault, Philippe S.. 2013. « Control of an exoskeleton robot arm with sliding mode exponential reaching law ». International Journal of Control, Automation and Systems, vol. 11, nº 1. pp. 92-104.
Compte des citations dans Scopus : 103.

Rahman, Mohammad Habibur, Kittel-Ouimet, Thierry, Saad, Maarouf, Kenné, Jean-Pierre et Archambault, Philippe S.. 2012. « Development and control of a robotic exoskeleton for shoulder, elbow and forearm movement assistance ». Applied Bionics and Biomechanics, vol. 9, nº 3. pp. 275-292.
Compte des citations dans Scopus : 33.

Rivera-Gomez, Hector, Gharbi, Ali et Kenné, Jean Pierre. 2013. « Joint control of production, overhaul, and preventive maintenance for a production system subject to quality and reliability deteriorations ». International Journal of Advanced Manufacturing Technology, vol. 69, nº 9-12. pp. 2111-2130.
Compte des citations dans Scopus : 48.

Rivera-Gomez, Hector, Gharbi, Ali et Kenné, Jean-Pierre. 2013. « Joint production and major maintenance planning policy of a manufacturing system with deteriorating quality ». International Journal of Production Economics, vol. 146, nº 2. pp. 575-587.
Compte des citations dans Scopus : 39.

Rivera-Gomez, Hector, Gharbi, Ali et Kenné, Jean-Pierre. 2013. « Production and quality control policies for deteriorating manufacturing system ». International Journal of Production Research, vol. 51, nº 11. pp. 3443-3462.
Compte des citations dans Scopus : 19.

Rivera-Gómez, Héctor, Gharbi, Ali, Kenné, Jean-Pierre, Montaño-Arango, Oscar et Corona-Armenta, Jose Ramón. 2020. « Joint optimization of production and maintenance strategies considering a dynamic sampling strategy for a deteriorating system ». Computers and Industrial Engineering, vol. 140.
Compte des citations dans Scopus : 55.

Rivera-Gomez, Hector, Gharbi, Ali, Kenné, Jean-Pierre, Montano-Arango, Oscar et Hernandez-Gress, Eva Selene. 2016. « Production control problem integrating overhaul and subcontracting strategies for a quality deteriorating manufacturing system ». International Journal of Production Economics, vol. 171. pp. 134-150.
Compte des citations dans Scopus : 41.

Rivera-Gómez, Héctor, Gharbi, Ali, Kenné, Jean-Pierre, Montaño-Arango, Oscar et Hernández-Gress, Eva Selene. 2018. « Subcontracting strategies with production and maintenance policies for a manufacturing system subject to progressive deterioration ». International Journal of Production Economics, vol. 200. pp. 103-118.
Compte des citations dans Scopus : 32.

Rivera-Gómez, Héctor, Gharbi, Ali, Kenné, Jean-Pierre, Ortiz-Zarco, Ruth et Corona-Armenta, José Ramón. 2021. « Joint production, inspection and maintenance control policies for deteriorating system under quality constraint ». Journal of Manufacturing Systems, vol. 60. pp. 585-607.
Compte des citations dans Scopus : 20.

Seo, Jaho, Venugopal, Ravinder et Kenné, Jean-Pierre. 2007. « Feedback linearization based control of a rotational hydraulic drive ». Control Engineering Practice, vol. 15, nº 12. pp. 1495-1507.
Compte des citations dans Scopus : 96.

Shaer, B., Kenné, J. P., Kaddissi, C. et Mintsa, H. A.. 2017. « Real-time hybrid control of electrohydraulic active suspension ». International Journal of Robust and Nonlinear Control, vol. 27, nº 18. pp. 4968-4991.
Compte des citations dans Scopus : 9.

Shaer, Bassel, Kenné, Jean-Pierre, Kaddissi, Claude et Fallaha, Charles. 2018. « A chattering-free fuzzy hybrid sliding mode control of an electrohydraulic active suspension ». Transactions of the Institute of Measurement and Control, vol. 40, nº 1. pp. 222-238.
Compte des citations dans Scopus : 19.

Tehrani, Mahdi Mohammadi, Beauregard, Yvan, Rioux, Michel, Kenne, Jean Pierre et Ouellet, Rejean. 2015. « A predictive preference model for maintenance of a heating ventilating and air conditioning system ». [Article de conférence]. IFAC-PapersOnLine, vol. 48, nº 3. pp. 130-135.
Compte des citations dans Scopus : 9.

Tehrani, Mahdi Mohammadi, Mobin, Mohammadsadegh, Beauregard, Yvan, Rioux, Michel et Kenné, Jean Pierre. 2021. « Multi-scenario and multi-criteria approach to evaluate prediction techniques used to recognise failure patterns ». International Journal of Applied Decision Sciences (IJADS), vol. 14, nº 4. pp. 361-386.

Compte rendu de conférence

Boulet, J.F., Gharbi, Ali et Kenné, Jean-Pierre. 2007. « Amélioration d'une politique combinée de maintenance et de contrôle d'inventaire dans un contexte manufacturier ». In 7e Congrès International de Génie Industriel (Trois-Rivières, QC, Canada, 5-8 juin 2007)

Boulet, J.F., Gharbi, Ali et Kenné, Jean-Pierre. 2007. « Multiobjective optimization of preventive and corrective maintenance policies in unreliable manufacturing systems ». In International Conference on Industrial Engineering and Systems Management (IESM) (Beijing, China, May 30-June 2, 2007)

Boulet, J.-F., Gharbi, Ali et Kenné, Jean-Pierre. 2005. « Production and corrective maintenance rate policy improvement in an unreliable failure prone manufacturing systems ». In 35th International Conference on Computer and Industrial Engineering (Istanbul, Turkey, June 19-22, 2005) pp. 321-326.

Bouzid, A., Songmene, V. et Kenné, J. P.. 2018. « Bavures d'usinage et ébavurage : Méthode de sélection des procédés et allocation optimale des machines ». In 7th International Metrology Conference – CAFMET 2018 (Marrakech, Maroc, Apr. 09-12, 2018) pp. 294-300. Comite Africain de Metrologie.

Charlot, E., Kenné, Jean-Pierre et Nadeau, Sylvie. 2005. « Optimal production and lockout/tagout control policies in manufacturing systems ». In 4th International Conference Safety of Industrial Automated Systems (SIAS) (Chicago, IL, USA, Sept. 26-28, 2005)

Dehayem Nodem, F. I. et Kenné, J.-P.. 2016. « Production control of a deteriorated remanufacturing system within an open-reverse supply chain ». In 24th Mediterranean Conference on Control and Automation (MED) (Athens, Greece, June 21-24, 2016) pp. 1266-1271. Piscataway, NJ, USA : IEEE.
Compte des citations dans Scopus : 2.

Dehayem Nodem, F. I., Kenné, Jean-Pierre et Gharbi, Ali. 2008. « A replacement policy of deteriorating production systems subject to imperfect repairs ». In 3rd IEEE Conference on Industrial Electronics and Applications (ICIEA) (Singapore, Singapore, June 3-5, 2008) pp. 6-11. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers Computer Society.

Dehayem Nodem, F. I., Kenné, Jean-Pierre et Gharbi, Ali. 2005. « Capacity expansion production and maintenance planning in stochastic manufacturing systems ». In International Conference on Numerical Analysis and Applied Mathematics (ICNAAM) (Rhodes, Greece, Sept. 16-20, 2005) pp. 423-427. Weinheim, Germany : Wiley-VCH Verlag.

Delpla, Victor, Hof, Lucas A. et Kenné, Jean-Pierre. 2020. « Closed loop supply chain optimization for Circular Manufacturing using Industry 4.0 technologies ». In 8th International Conference on Information Systems, Logistics and Supply Chain: Interconnected Supply Chains in an Era of Innovation (ILS) (Austin, TX, USA, Apr. 22-24, 2020) pp. 220-227. International Conference on Information Systems, Logistics and Supply Chain.

Delpla, Victor, Kenné, Jean-Pierre, Maloum Fall, Ameth, Balalpour, Mahan et Hof, Lucas A.. 2021. « Metal scrap recycling 4.0: Towards smart operation and production of high-quality alloys ». In Canadian Society for Mechanical Engineering International Congress (2021) (Charlottetown, PE, Canada, June 28-30, 2021) Coll. « Progress in Canadian Mechanical Engineering », vol. 4. Charlottetown, P.E.I. : University of Prince Edward Island. Robertson Library.

Demy, F., Nadeau, Sylvie et Kenné, Jean-Pierre. 2015. « Integration of production planning, scheduling and lockout/tagout activities in a manufacturing system ». In Gesellschaft für Arbeitswissenschaft (Karlsruhe, Germany, Feb. 25-27, 2015)

Dodo Amadou, Mamane Moustapha, Kenné, Jean-Pierre, Saad, Maarouf et Nerguizian, Vahé. 2006. « Virtual and remote laboratories ». In IEEE International Conference on E-Learning in Industrial Electronics (Hammamet, Tunisia, Dec. 18-20, 2006) pp. 173-176. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 9.

Emami-Mehrgani, B., Kenné, Jean-Pierre et Nadeau, Sylvie. 2012. « Lockout/tagout and human error in production control of manufacturing systems with passive redundancy ». In Gesellschaft für Arbeitswissenschaft (Kassel, Allemagne, Feb. 22-24, 2012) pp. 623-627.

Emami-Mehrgani, B., Nadeau, Sylvie et Kenné, Jean-Pierre. 2011. « Optimisation des politiques de surveillance par le biais du cadenassage/décadenassage ». In 33e Congrès de l’AQHSST (Trois-Rivières, QC, Canada, 11-13 mai 2011)

Emami-Mehrgani, B., Nadeau, Sylvie et Kenné, Jean-Pierre. 2012. « Réduction des coûts de production des systèmes manufacturiers sujets aux activités de cadenassage/décadenassage ». In 34e congrès de l’AQHSST (Gatineau, QC, Canada, 16-18 mai 2012) Bromont, QC, Canada : Association québécoise pour l’hygiène, la santé et la sécurité du travail.

Emami-Mehrgani, Behnam., Nadeau, Sylvie et Kenné, Jean-Pierre. 2011. « Lockout/tagout and operational risks in the production control of a transfer line with passive redundancy ». In ASME International mechanical engineering congress and exposition (IMECE) (Denver, CO, USA, Nov. 11-17, 2011) pp. 745-752. ASME.

Emami-Mehrgani, Behnam, Nadeau, Sylvie et Kenné, Jean-Pierre. 2010. « Integrating lockout/tagout with operational risks : the passive redundancy case ». In 56 Kongress der Gesellschaft für Arbeitswissenschaft (GFA) (Darmstadt, Germany, Mar. 24-26, 2010) pp. 475-482.

Gharbi, Ali et Kenné, Jean Pierre. 1999. « Experimental approach control for unreliable manufacturing systems ». In 7th IEEE Conference on Emerging Technologies and Factory Automation (Barcelona, Spain, Oct. 18-21, 1999) pp. 663-669. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Gharbi, Ali et Kenné, Jean Pierre. 1997. « Production rate control and design problem in a failure prone manufacturing system ». In 6th Industrial Engineering Research Conference (Miami Beach, FL, USA, May 17-18, 1997) pp. 813-818. Norcross, GA, USA : Institute of Industrial Engineers.

Gharbi, Ali et Kenné, Jean-Pierre. 2000. « Production and corrective maintenance planning of FMS through simulation optimisation ». In 4th International Conference on Engineering Design and Automation (Orlando, FL, USA, Aug., 2000) pp. 446-451.

Gharbi, Ali, Kenné, Jean-Pierre et Boulet, J.-F.. 2005. « Amélioration des taux de production et de maintenance corrective d'un système de production ». In 6ième Congrès International de Génie Industriel (Besançon, France, 7-10 juin 2005)

Hajji, A., Gharbi, Ali et Kenné, Jean-Pierre. 2007. « Joint optimal production / setup policies for three family products in unreliable supply chains ». In International Conference on Industrial Engineering and Systems Management (IESM) (Beijing, China, May 30-June 2, 2007)

Hajji, A., Gharbi, Ali et Kenné, Jean-Pierre. 2008. « Operational level-based control policies in supply chain environment ». In 7e Conférence Internationale de Modélisation et Simulation (MOSIM) (Paris, France, 31 mars-2avril 2008)

Hajji, Adnene, Gharbi, Ali, Kenné, Jean-Pierre et Pellerin, Robert. 2009. « Production control and replenishment strategy with multiple suppliers ». In 8e Congrès International de Génie Industriel (Bagnères de Bigorre, France, June 10-12, 2009)

Hajji, Adnene, Kenné, Jean Pierre et Gharbi, Ali. 2003. « Production control of an unreliable manufacturing system with setups : a comparative study ». In IASTED International Conference on Intelligent Systems and Control (Salzburg, Austria, June 25-27, 2003) pp. 258-263. Calgary, Canada : ACTA Press.

Kaddissi, C., Kenné, Jean-Pierre et Saad, Maarouf. 2006. « Indirect adaptive control of an electro-hydraulic servo system based on nonlinear backstepping ». In IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006) pp. 3147-3153. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 19.

Kadissi, C., Kenné, Jean-Pierre et Saad, Maarouf. 2005. « Drive by wire control of an electro-hydraulic active suspension, a backstepping approach ». In IEEE Conference on Control Applications (CCA) (Toronto, Canada, Aug. 28-31, 2005) pp. 1581-1587. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.

Kamguem, René, Songmene, Victor, Kenné, Jean-Pierre et Tahan, Antoine. 2011. « Surface quality of 7075-T6 aluminum alloy machined using high-speed milling process ». In Light metals 2011 : Proceedings of the 50th Conference of Metallurgists, October 2-5, 2011, Montreal, Quebec, Canada (Montreal, Canada, Oct. 2-5, 2011) pp. 495-508. Westmount : MetSoc.

Kemi Yotat, Frank Éric, Kenné, Jean-Pierre et Songmene, Victor. 2017. « Optimal stochastic control of an aluminium recycling unit in reverse logistics ». In 29th European Modeling and Simulation Symposium (EMSS 2017) Held at the International Multidisciplinary Modeling and Simulation Multiconference (I3M 2017) (Barcelona, Spain, Sept. 18-20, 2017) pp. 385-390. CAL-TEK S.r.l..

Kenné, J. P. et Boukas, E. K.. 1997. « Production and corrective maintenance planning problem of a failure prone manufacturing system ». In Proceedings of the 1997 American Control Conference (Albuquerque, NM, USA, June 04-06, 1997) pp. 1013-1014. IEEE.
Compte des citations dans Scopus : 9.

Kenné, J.P.. 2003. « Laboratoire virtuel de commande des procédés industriels ». In Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2002-2003 : Actes (Montréal, QC, Canada, 25 avril 2003) pp. 59-66. École de technologie supérieure.

Kenné, Jean Pierre. 2003. « Production and maintenance rates planning problems in stochastic manufacturing systems ». In IASTED International Conference on Computer Science and Technology (Cancun, Mexico, May 19-21, 2003) pp. 417-422. Calgary, Canada : ACTA Press.

Kenné, Jean Pierre et Boukas, E. K.. 2001. « Control of production and maintenance rates in manufacturing systems: a hierarchical approach ». In IASTED International Conference on Robotics and Manufacturing (RM) (Cancum, Mexico, May 21-24, 2001) pp. 123-127. Calgary, Canada : IASTED/ACTA Press.

Kenné, Jean Pierre et Tchokogue, A.. 2003. « Integrated production planning and maintenance strategies for effective SCM ». In IASTED International Conference on Intelligent Systems and Control (Salzburg, Austria, June 25-27, 2003) pp. 478-482. Calgary, Canada : ACTA Press.

Kenné, Jean Pierre et Wamkeue, René. 2001. « Production and corrective maintenance policies in a failure prone manufacturing system ». In Applied Simulation and Modelling. Proceedings of the IASTED International Conference (Marbella, Spain, Sept. 4-7, 2001) pp. 245-249. Anaheim, CA, USA : ACTA Press.

Kenné, Jean-Pierre. 2006. « Hierarchical control of production and maintenance rates of a two-tandem-machine system ». In Proceedings of the 15th IASTED International Conference on Applied Simulation and Modelling (Rhodes, Greece, June 26-28, 2006) pp. 145-150. Calgary, Canada : ACTA Press.

Kenné, Jean-Pierre, Dejax, Pierre et Gharbi, Ali. 2010. « Production control of a hybrid manufacturing/remanufacturing system in reverse logistics ». In 3rd International Conference on Information Systems, Logistics and Supply Chain (ILS) (Casablanca, Morocco, Apr. 13-16, 2010)

Kenné, Jean-Pierre et Gharbi, Ali. 2000. « A Simulation Optimization Based Control Policy for Failure Prone One-Machine, two-Products Manufacturing System ». In 27th International Conference On Computer and Industrial Engineering (Beijing, China, Oct. 11-13, 2000)

Kenné, Jean-Pierre, Kadissi, Claude et Saad, Maarouf. 2004. « Position control of an electro-hydraulic servosystem : a non-linear backstepping approach ». In First International Conference on Informatics in Control, Automation and Robotics (ICINCO) (Setúbal, Portugal, Aug. 25-28, 2004) pp. 270-276.

Kenné, Jean-Pierre, Polotski, Vladimir et Gharbi, Ali. 2014. « Feasibility and optimality conditions for setup schedule in uncertain manufacturing systems depend on the interplay between setup logistics and perturbation flow ». In 20th Conference of the International Federation of Operational Research Societies. 13-18 July 2014. Barcelona, Spain (Barcelona, Spain, July 13-18, 2014)

Kouedeu, A. F., Kenné, J-P. et Songmene, V.. 2016. « Hybrid control of processing/reprocessing rates for a deteriorated manufacturing system ». In 11th International Conference on Modeling, Optimization & Simulation (MOSIM) (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Kouedeu, Annie Francie, Kenné, Jean-Pierre, Dejax, Pierre et Songmene, Victor. 2012. « A stochastic model for controlling the deterioration of a two machines production system: Extensions to remanufacturing ». In 25th European Conference on Operational Research (EURO 2012) (Vilnius, Lituanie, July 08-11, 2012)

Kouedeu, Annie Francie, Kenné, Jean-Pierre, Dejax, Pierre et Songmene, Victor. 2012. « The study of a deteriorating manufacturing system using simulation and response methodology ». In 24th European Modeling and Simulation Symposium, EMSS 2012 (Vienna, Austria, Sept. 19-21, 2012) pp. 80-89. Italy : DIPTEM.

Kouedeu, Annie Francie, Kenné, Jean-Pierre, Delax, Pierre et Songmene, Victor. 2012. « Production planning of a two-machine manufacturing system with production dependent failure rates ». In International Conference on Information Systems, Logistics and Supply Chain (ILS) (Québec, QC, Canada, Aug. 26-29, 2012)

Kouedeu, Annie Francie, Kenné, Jean-Pierre et Songmene, Victor. 2019. « Optimal production planning of hybrid manufacturing/remanufacturing systems under deteriorations ». In Proceedings of the 9th International Conference on Industrial Engineering and Operations Management (IEOM) (Bangkok, Thailand, March 05-07, 2019) pp. 1382-1390. IEOM Society.

Kouedeu, Annie Francie, Kenné, Jean-Pierre et Songmene, Victor. 2011. « Production, preventive and corrective maintenance planning in manufacturing systems under imperfect repairs ». In 3rd International Workshop on Dependable Control of Discrete Systems (DCDS) (Saarbrucken, Germany, June 15-17, 2011) pp. 59-64. IEEE.
Compte des citations dans Scopus : 3.

Mansour, Malek, Nadeau, Sylvie et Kenné, Jean-Pierre. 2009. « Management and planning of lockout operations : the case of a high volume packing line ». In Arbeit, Beschäftigungsfähigkeit und Produktivität im 21. Jahrhundert : Bericht zum 55. Kongress der Gesellschaft für Arbeitswissenschaft vom 4. - 6. März 2009 [an der Technischen Universität Dortmund] (Dortmund, Germany, Mar. 4-6, 2009) pp. 547-551. Dortmund : GFA-Press.

Mejía-Moncayo, Camilo, Kenné, Jean-Pierre et Hof, Lucas A.. 2021. « A hybrid architecture for a reconfigurable cellular remanufacturing system ». In Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems : IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2021, Proceedings, Part I (Nantes, France, Sept. 05-09, 2021) Coll. « IFIP Advances in Information and Communication Technology », vol. 631. pp. 488-496. Springer.
Compte des citations dans Scopus : 8.

Mintsa, Honorine Angue, Kenné, Jean-Pierre et Venugopal, Ravinder. 2009. « Adaptive control of an electrohydraulic position servo system ». In 9th IEEE Africon Conference (AFRICON) (Nairobi, Kenya, Sept. 23-25, 2009) pp. 44-49. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 13.

Nadeau, S., Bouzid, H. A. et Kenné, J. P.. 2003. « Conception d'un convoyeur à bagages pour le chargement/déchargement des avions ». In Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2002-2003 : Actes (Montréal, QC, Canada, 25 avril 2003) pp. 67-72. École de technologie supérieure.

Nadeau, Sylvie, Bouzid, Hakim et Kenné, Jean-Pierre. 2003. « L'enseignement par la méthode des cas en génie mécanique ». In Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2001-2002 : Actes (Montréal, QC, Canada, 11 juin 2002) pp. 13-16. École de technologie supérieure.

Nadeau, Sylvie et Kenné, Jean-Pierre. 2011. « Reduction of machine safety risks through optimal management of production : reflections on a decade research ». In Dokumentation des 57. Arbeitswissenschaftlichen Kongresses in Chemnitz [Documentation of the 57th Work Scientific Congress in Chemnitz ] (Chemnitz, Allemagne , Mar. 23-25, 2011) pp. 525-527. Dortmund : GfA-Press.

Nadeau, Sylvie, Kenné, Jean-Pierre et Alexandru, Paul. 2009. « Modeling the integration of occupational health and safety risks with operational risks associated with autonomous and multi-skilled work performed in uncertain environments ». In 2nd International Conference on Industrial Risk Engineering = 2e Congrès International sur l'Ingénierie des Risques Industriels (CIRI) (Reims, France, 13-15 mai 2009)

Nkeungoué, L. J. et Kenné, J. P.. 2005. « Quality control and production planning problem of failure prone manufacturing systems ». In Proceedings of the 24th IASTED International Conference on Modeling, Identification, and Control (MIC) (Innsbruck; Austria, Feb. 16-18, 2005) pp. 571-576. Anaheim ; Calgary : ACTA Press.

Nkeungoue, L. J. et Kenné, Jean Pierre. 2004. « Corrective and preventive maintenance rates control in production planning of a FMS ». In 23rd IASTED International Conference on Modelling, Identification, and Control (Grindelwald, Switzerland, Feb. 23-25, 2004) pp. 351-356. Anaheim, CA, USA : ACTA Press.

Ouaret, Samir, Kenné, Jean-Pierre et Gharbi, Ali. 2016. « Joint optimal production and replacement policy for a deteriorated closed-loop manufacturing system ». In 11ème Conférence Francophone de Modélisation, Optimisation et Simulation (MOSIM) (Montréal, QC, Canada, Aug. 21-24, 2016) MOSIM.

Piengang, Fabrice Chilly Ngamaleu, Beauregard, Yvan et Kenné, Jean-Pierre. 2017. « Introduction to optimization of decision-making in coupled, dynamic and uncertain production, maintenance and product development environment ». In 38th International Annual Conference of the American Society for Engineering Management (ASEM 2017) (Huntsville, AL, USA, Oct. 18-21, 2017) pp. 210-220. ASEM.
Compte des citations dans Scopus : 1.

Polotski, Vladimir, Kenne, Jean-Pierre et Gharbi, Ali. 2016. « Adaptive control of hybrid failure-prone manufacturing systems under demand variation and uncertainty ». In 11th International Conference on Modeling, Optimization and SIMulation - MOSIM'16 (Montreal, QC, Canada, Aug. 22-24, 2016) MOSIM.

Rahman, M. H., Kittel-Ouimet, T., Saad, Maarouf, Kenné, Jean-Pierre et Archambault, P. S.. 2011. « Nonlinear control of an upper-limb exoskelton robot ». In 18th IEEE International Conference on Electronics, Circuits and Systems (ICECS) (Beirut, Lebanon, Dec. 11-14, 2011) pp. 772-775. Piscataway, NJ, USA : Institute of Electrical and Electronics Engineers.
Compte des citations dans Scopus : 2.

Rahman, M. H., Ouimet, T. K., Saad, M., Kenné, J. P. et Archambault, P. S.. 2010. « Development and control of a wearable robot for rehabilitation of elbow and shoulder joint movements ». In 36th Annual Conference on IEEE Industrial Electronics Society (IECON) (Glendale, AZ, USA, Nov. 07-10, 2010) pp. 1506-1511. IEEE.
Compte des citations dans Scopus : 46.

Rahman, M. H., Saad, M., Kenné, J. P. et Archambault, P. S.. 2010. « Exoskeleton robot for rehabilitation of elbow and forearm movements ». In 18th Mediterranean Conference on Control and Automation (MED'10) (Marrakech, Morocco, June 23-25, 2010) pp. 1567-1572. IEEE.
Compte des citations dans Scopus : 30.

Rahman, M. H., Saad, M., Kenné, J. P. et Archambault, P. S.. 2010. « Modeling and development of an exoskeleton robot for rehabilitation of wrist movements ». In IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM) (Montreal, QC, Canada, July 06-09, 2010) pp. 25-30. IEEE.
Compte des citations dans Scopus : 20.

Rahman, M. H., Saad, Maarouf, Kenné, Jean-Pierre et Archambault, P. S.. 2012. « Nonlinear sliding mode control implementation of an upper limb exoskeleton robot to provide passive rehabilitation therapy ». In Intelligent Robotics and Applications : 5th International Conference, ICIRA 2012, Montreal, QC, Canada, October 3-5, 2012, Proceedings, Part II (Montreal, QC, Canada, Oct. 3-5, 2012) Coll. « Lecture Notes in Computer Science », vol. 7507. pp. 52-62. Berlin, Germany : Springer Verlag.
Compte des citations dans Scopus : 21.

Rahman, M. H., Saad, Maarouf, Ochoa-Luna, C., Kenné, Jean-Pierre et Archambault, P. S.. 2012. « Cartesian trajectory tracking of an upper limb exoskeleton robot ». In 38th Annual Conference on IEEE Industrial Electronics Society, IECON 2012 (Montreal, QC, Canada, Oct. 25-28, 2012) pp. 2668-2673. Washington, DC : IEEE Computer Society.
Compte des citations dans Scopus : 8.

Rahman, Mohammad H., K-Ouimet, T., Saad, Maarouf, Kenné, Jean-Pierre et Archambault, Philippe S.. 2011. « Control of a powered exoskeleton for elbow, forearm and wrist joint movements ». In IEEE International Conference on Robotics and Biomimetics (ROBIO) (Karon Beach, Phuket, Thailand, Dec. 07-11, 2011) pp. 1561-1566. IEEE.
Compte des citations dans Scopus : 11.

Rahman, Mohammad H., K-Ouimet, T., Saad, Maarouf, Kenné, Jean-Pierre et Archambault, Philippe S.. 2011. « Tele-operation of a robotic exoskeleton for rehabilitation and passive arm movement assistance ». In 2011 IEEE International Conference on Robotics and Biomimetics (ROBIO) (Karon Beach, Phuket, Thailand, Dec. 07-11, 2011) pp. 443-448. IEEE.
Compte des citations dans Scopus : 20.

Rahman, Mohammad H., Saad, Maarouf, Kenné, Jean P. et Archambault, Philippe S.. 2009. « Modeling and control of a 7DOF exoskeleton robot for arm movements ». In 2009 IEEE International Conference on Robotics and Biomimetics (ROBIO) (Guilin, China, Dec. 19-23, 2009) pp. 245-250. IEEE.
Compte des citations dans Scopus : 31.

Rivera-Gomez, H., Gharbi, A. et Kenne, J. P.. 2012. « A comparative study of simulation models for the production control of unreliable manufacturing systems ». In Proceedings of the 4th International Conference on Information Systems, Logistics and Supply Chain : Creative Logistics for an Uncertain World - ILS 2012 (Québec, QC, Canada, Aug. 26-29, 2012)

Shaer, Bassel, Kenné, Jean-Pierre, Kaddissi, Claude et Polotski, Vladimir. 2013. « Nonlinear hydbrid sliding mode control of an electrohydraulic active suspension ». In 7th Int. Conference on Integrated Modeling and Analysis in Applied Control and Automation, IMAACA 2013, Held at the International Multidisciplinary Modeling and Simulation Multiconference, I3M 2013 (Athens, Greece, Sept. 25-27, 2013) pp. 6-14. Caltek.

Wamkeue, René, Kenné, Jean Pierre et Moraogue, S.. 2001. « Incidence of induction generator modelling on self-excitation phenomenon prediction in electric network cogeneration ». In Applied Simulation and Modelling. Proceedings of the IASTED International Conference (Marbella, Spain, Sept. 4-7, 2001) pp. 213-217. Anaheim, CA, USA : ACTA Press.

Chapitre de livre

Bouzid, H., Kenné, J. P., Nadeau, S. et Gowings, T.. 2015. « Chapter 2: Case study : Designing a log splitter ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 7-13. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Bouzid, H., Nadeau, S. et Kenné, J. P.. 2015. « Chapter 1: Case study : Gasket test rig ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 1-6. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Bouzid, H., Nadeau, S., Kenné, J. P. et Giner-Morency, C.. 2015. « Chapter 4: Case study : Designing a hydraulic car lift for small auto repair shops ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 26-36. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Bouzid, H., Nadeau, S., Kenné, J. P., Gowings, T. et Giner-Morency, C.. 2015. « Chapter 5: Case study : Designing a boom lift ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 37-55. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Bouzid, Hakim, Kenné, Jean-Pierre et Nadeau, Sylvie. 2010. « Case study : designing a log splitter ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. pp. 7-13. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Bouzid, Hakim, Nadeau, Sylvie et Kenné, Jean-Pierre. 2010. « Case study : designing a boom lift ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. pp. 36-53. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Bouzid, Hakim, Nadeau, Sylvie et Kenné, Jean-Pierre. 2010. « Case study : designing a hydraulic car lift for small auto repair shops ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. pp. 26-35. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Bouzid, Hakim, Nadeau, Sylvie et Kenné, Jean-Pierre. 2010. « Case study : gasket test rig ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. pp. 1-6. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Kali, Yassine, Saad, Maarouf, Kenné, Jean-Pierre et Benjelloun, Khalid. 2019. « Robot manipulator control using backstepping with Lagrange’s extrapolation and PI compensator ». In New Developments and Advances in Robot Control. Coll. « Studies in Systems, Decision and Control », vol. 175. pp. 137-161. Singapore : Springer International Publishing.
Compte des citations dans Scopus : 3.

Kenné, J. P., Bouzid, H., Nadeau, S. et Giner-Morency, C.. 2015. « Chapter 14: Case study : Designing a lift truck ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 122-128. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Kenné, J. P., Bouzid, H., Nadeau, S. et Giner-Morency, C.. 2015. « Chapter 6: Case study : Designing an aerial work platform vehicle ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 54-63. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Kenné, J. P., Nadeau, S., Bouzid, H. et Giner-Morency, C.. 2015. « Chapter 12: Case study: automated overhead crane ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 105-113. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Kenné, Jean-Pierre, Bouzid, Hakim et Nadeau, Sylvie. 2010. « Case study : designing a lift truck ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. pp. 132-138. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Kenné, Jean-Pierre, Bouzid, Hakim et Nadeau, Sylvie. 2010. « Case study : designing an aerial work platform vehicle ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. pp. 54-60. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Kenné, Jean-Pierre, Nadeau, Sylvie et Bouzid, Hakim. 2010. « Case study : automated overhead crane ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Nadeau, S., Bouzid, H., Kenné, J. P. et Giner-Morency, C.. 2015. « Chapter 13: Designing an airplane baggage belt loader ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. 2nd edition. pp. 114-121. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Nadeau, Sylvie, Bouzid, Hakim et Kenné, Jean-Pierre. 2010. « Case study : designing an airplane baggage belt loader ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. pp. 125-131. Newcastle upon Tyne, UK : Cambridge Scholars Publishing.

Article de revue ou de magazine, non révisé par les pairs

Charlot, E., Nadeau, Sylvie et Kenné, Jean-Pierre. 2006. « Impact du contrôle du cadenassage sur les risques d'accidents et les coûts de production ». Travail et Santé, vol. 22, nº 3. pp. 48-52.

Emami-Mehrgani, Behnam, Nadeau, Sylvie et Kenné, Jean-Pierre. 2011. « Cadenassage et baisse des coûts de production ». Travail et santé, vol. 27, nº 2. pp. 13-15.

Affiche

Kouedeu, A. F., Kenné, J. P., Dejax, P., Songmene, V. et Polostki, V.. 2014. « Stochastic models and numerical solutions for manufacturing/remanufacturing systems with applications to the printer cartridge industry ». Affiche présentée lors de la conférence : Journée des étudiants du REGAL (JER2014) (Sherbrooke, QC, Canada, Nov. 18, 2014).

Communication

Badiane, A., Kenné, Jean-Pierre et Nadeau, Sylvie. 2009. « Produire à moindre coût dans un espace sécuritaire ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 11 juin 2009).

Emami-Mehrgani, B., Nadeau, S. et Kenné, J. P.. 2010. « Optimisation des politiques de surveillance dans le milieu de l'industrie par la gestion de la procédure de cadenassage/décadenassage ». Communication lors de la conférence : Conférences mensueles en sécurité du travail et contrôle des risques industriels RRSSTQ, ÉREST, ÉTS (Montréal, QC, Canada, 9 déc. 2010).

Emami-Mehrgani, B., Nadeau, Sylvie et Kenné, Jean-Pierre. 2011. « Temps moyen de cadenassage/décadenassage : un outil d'optimisation des politiques de surveillance ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 14 avril 2011).

Emami-Mehrgani, Behnam, Nadeau, Sylvie et Kenné, Jean-Pierre. 2010. « Gérer le cadenassage/décadenassage : une stratégie de production optimale ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels, RRSSTQ, ÉREST, ÉTS (Montréal, Québec, Canada, 9 déc. 2010).

Hajji, A., Gharbi, Ali et Kenné, Jean-Pierre. 2008. « Operational level-based control policies in supply chain environment ». Communication lors de la conférence : 7e Conférence Internationale de Modélisation et Simulation (MOSIM) (Paris, France, Mar. 31-Apr. 2, 2008).

Kenné, Jean-Pierre et Boukas, E. K.. 2002. « Production rates control of a tandem two-machine manufacturing system ». Communication lors de la conférence : IASTED International Conference on Robotics and Manufacturing (Cancun, Mexico, May 21-23, 2002).

Kenné, Jean-Pierre, Gharbi, Ali et Beit, M.. 2008. « On the integrated production and preventive maintenance problem in manufacturing systems with backorder ». Communication lors de la conférence : 20th European Modeling and Simulation Symposium (EMSS) (Campora San Giovanni, Italy, Sept. 17-19, 2008).

Mansour, M., Nadeau, Sylvie et Kenné, Jean-Pierre. 2007. « Sécurité des convoyeurs et intégration du cadenassage sur une ligne de production ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 15 nov. 2007).

Rapport technique

Kenné, Jean-Pierre et Boukas, El-Kébir. 2002. « Hierarchical control of production and maintenance rates in manufacturing systems ». Coll. « Rapport technique (École de technologie supérieure) », vol. ETS-RT-2002-002. Montréal : École de technologie supérieure. 43 p.

Cette liste a été générée le Thu Mar 28 01:42:02 2024 EDT.